2016-08-04T22:36:10.798Z,1470350170.798 [CommandLine](IMPORTANT): got command restart logs 2016-08-04T22:39:05.852Z,1470350345.852 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-08-04T22:39:05.939Z,1470350345.939 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-08-04T22:45:32.474Z,1470350732.474 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2016-08-04T22:46:06.645Z,1470350766.645 [sci2:NeedComms:F.Buoyancy:A_Timeout:A](IMPORTANT): buoyancy pump-down timeout at 945.864886 ml 2016-08-04T23:13:23.380Z,1470352403.380 [CBIT](IMPORTANT): EFC elev offset (n=7200): elevOffset = 0.209625 degree 2016-08-05T00:00:21.031Z,1470355221.031 [ThrusterServo](FAULT): Invalid EZ Servo response:"ÿÿÕ242" 2016-08-05T00:01:28.766Z,1470355288.766 [CBIT](IMPORTANT): EFC elev offset (n=7200): elevOffset = 0.254458 degree 2016-08-05T00:48:07.549Z,1470358087.549 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=40885, MT Status=1, MTMSN=716 2016-08-05T00:48:09.985Z,1470358089.985 [CommandLine](IMPORTANT): got command configSet Normal linearApproximation Rowe_600LCM.height_above_sea_floor persist 2016-08-05T00:48:09.998Z,1470358089.998 [CommandLine](FAULT): Initializing LinearApproxWriter with NULL parameter value 2016-08-05T00:53:31.822Z,1470358411.822 [sci2:NeedComms:F.Buoyancy:A_Timeout:A](IMPORTANT): buoyancy pump-down timeout at 945.864886 ml 2016-08-05T00:56:40.798Z,1470358600.798 [CBIT](IMPORTANT): EFC elev offset (n=7200): elevOffset = 0.077132 degree 2016-08-05T01:09:30.673Z,1470359370.673 [ThrusterServo](FAULT): Invalid EZ Servo response:"" 2016-08-05T01:17:18.270Z,1470359838.270 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-08-05T01:17:19.484Z,1470359839.484 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2016-08-05T01:23:31.961Z,1470360211.961 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-08-05T01:44:43.120Z,1470361483.120 [CBIT](IMPORTANT): EFC elev offset (n=7200): elevOffset = 0.169163 degree 2016-08-05T02:32:46.298Z,1470364366.298 [CBIT](IMPORTANT): EFC elev offset (n=7200): elevOffset = 0.059944 degree 2016-08-05T02:59:34.496Z,1470365974.496 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2016-08-05T03:00:13.501Z,1470366013.501 [NAL9602](FAULT): Queried for signal strength and failed to receive proper response. no error 2016-08-05T03:03:45.102Z,1470366225.102 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=40890, MT Status=1, MTMSN=717 2016-08-05T03:03:50.777Z,1470366230.777 [CommandLine](IMPORTANT): got command configSet Express none 2016-08-05T03:03:50.777Z,1470366230.777 [CommandLine](FAULT): Incomplete syntax. Try: help configSet 2016-08-05T03:04:27.098Z,1470366267.098 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=40891, MT Status=1, MTMSN=718 2016-08-05T03:04:28.043Z,1470366268.043 [CommandLine](IMPORTANT): got command schedule asap "load Science/sci2.xml;set sci2.MissionTimeout 24 hour;set sci2.NeedCommsTime 150 minute;set sci2.Lat1 42.598 degree;set sci2.Lon1 -87.479 degree;set sci2.Lat2 42.5 degree;set sci2.Lon2 -87.372 degree;set sci2.YoYoMinDepth 3 meter" xgub 1 2.000000 2016-08-05T03:04:28.043Z,1470366268.043 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=xgub 2016-08-05T03:04:28.045Z,1470366268.045 [CommandLine](IMPORTANT): Scheduled #50 (#1 of 2 with id='xgub'): "load Science/sci2.xml;set sci2.MissionTimeout 24 hour;set sci2.NeedCommsTime 150 minute;set sci2.Lat1 42.598 degree;set sci2.Lon1 -87.479 degree;set sci2.Lat2 42.5 degree;set sci2.Lon2 -87.372 degree;set sci2.YoYoMinDepth 3 meter" ASAP 2016-08-05T03:04:59.637Z,1470366299.637 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=40892, MT Status=1, MTMSN=719 2016-08-05T03:05:00.416Z,1470366300.416 [CommandLine](IMPORTANT): got command schedule asap "set sci2.YoYoMaxDepth 60 meter;set sci2.MaxDepth 70 meter;run " xgub 2 2.000000 2016-08-05T03:05:00.416Z,1470366300.416 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=xgub 2016-08-05T03:05:00.421Z,1470366300.421 [CommandLine](IMPORTANT): Scheduled #51 (#2 of 2 with id='xgub'): "set sci2.YoYoMaxDepth 60 meter;set sci2.MaxDepth 70 meter;run " ASAP 2016-08-05T03:05:00.524Z,1470366300.524 [CommandLine](IMPORTANT): got command load ./Missions/Science/sci2.xml 2016-08-05T03:05:02.920Z,1470366302.920 [CommandLine](IMPORTANT): Loaded ./Missions/Science/sci2.xml 2016-08-05T03:05:03.060Z,1470366303.060 [MissionManager](IMPORTANT): Started mission Default 2016-08-05T03:05:15.567Z,1470366315.567 [CommandLine](IMPORTANT): got command set sci2.MissionTimeout 24.000000 hour 2016-08-05T03:05:15.568Z,1470366315.568 [CommandLine](IMPORTANT): got command set sci2.NeedCommsTime 150.000000 minute 2016-08-05T03:05:15.569Z,1470366315.569 [CommandLine](IMPORTANT): got command set sci2.Lat1 42.598000 degree 2016-08-05T03:05:15.570Z,1470366315.570 [CommandLine](IMPORTANT): got command set sci2.Lon1 -87.478996 degree 2016-08-05T03:05:15.571Z,1470366315.571 [CommandLine](IMPORTANT): got command set sci2.Lat2 42.500000 degree 2016-08-05T03:05:15.574Z,1470366315.574 [CommandLine](IMPORTANT): got command set sci2.Lon2 -87.372002 degree 2016-08-05T03:05:15.575Z,1470366315.575 [CommandLine](IMPORTANT): got command set sci2.YoYoMinDepth 3.000000 meter 2016-08-05T03:05:19.648Z,1470366319.648 [CommandLine](IMPORTANT): got command set sci2.YoYoMaxDepth 60.000000 meter 2016-08-05T03:05:19.649Z,1470366319.649 [CommandLine](IMPORTANT): got command set sci2.MaxDepth 70.000000 meter 2016-08-05T03:05:19.650Z,1470366319.650 [CommandLine](IMPORTANT): got command run 2016-08-05T03:05:19.654Z,1470366319.654 [CommandLine](IMPORTANT): Running 2016-08-05T03:05:19.854Z,1470366319.854 [MissionManager](IMPORTANT): Started mission sci2 2016-08-05T03:35:37.858Z,1470368137.858 [sci2:NeedComms:F.Buoyancy:A_Timeout:A](IMPORTANT): buoyancy pump-down timeout at 953.519891 ml 2016-08-05T04:01:09.717Z,1470369669.717 [CBIT](IMPORTANT): EFC elev offset (n=7200): elevOffset = -0.020750 degree 2016-08-05T04:11:39.609Z,1470370299.609 [CBIT](IMPORTANT): Beginning GF scan 2016-08-05T04:49:12.710Z,1470372552.710 [CBIT](IMPORTANT): EFC elev offset (n=7200): elevOffset = 0.255265 degree 2016-08-05T05:30:34.391Z,1470375034.391 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-08-05T05:37:14.284Z,1470375434.284 [CBIT](IMPORTANT): EFC elev offset (n=7200): elevOffset = 0.211095 degree 2016-08-05T06:09:47.726Z,1470377387.726 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=40920, MT Status=1, MTMSN=720 2016-08-05T06:09:50.166Z,1470377390.166 [CommandLine](IMPORTANT): got command configSet Express none Rowe_600LCM.height_above_sea_floor persist 2016-08-05T06:22:44.983Z,1470378164.983 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=40930, MT Status=1, MTMSN=721 2016-08-05T06:22:45.897Z,1470378165.897 [CommandLine](IMPORTANT): got command schedule asap "load Science/sci2.xml;set sci2.MissionTimeout 24 hour;set sci2.NeedCommsTime 150 minute;set sci2.Lat1 42.598 degree;set sci2.Lon1 -87.479 degree;set sci2.Lat2 42.2254 degree;set sci2.Lon2 -87.5767 degree" xtmz 1 2.000000 2016-08-05T06:22:45.898Z,1470378165.898 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=xtmz 2016-08-05T06:22:45.899Z,1470378165.899 [CommandLine](IMPORTANT): Scheduled #52 (#1 of 2 with id='xtmz'): "load Science/sci2.xml;set sci2.MissionTimeout 24 hour;set sci2.NeedCommsTime 150 minute;set sci2.Lat1 42.598 degree;set sci2.Lon1 -87.479 degree;set sci2.Lat2 42.2254 degree;set sci2.Lon2 -87.5767 degree" ASAP 2016-08-05T06:23:07.085Z,1470378187.085 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=40931, MT Status=1, MTMSN=722 2016-08-05T06:23:07.847Z,1470378187.847 [CommandLine](IMPORTANT): got command schedule asap "set sci2.YoYoMinDepth 3 meter;set sci2.YoYoMaxDepth 60 meter;set sci2.MaxDepth 70 meter;run " xtmz 2 2.000000 2016-08-05T06:23:07.848Z,1470378187.848 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=xtmz 2016-08-05T06:23:07.849Z,1470378187.849 [CommandLine](IMPORTANT): Scheduled #53 (#2 of 2 with id='xtmz'): "set sci2.YoYoMinDepth 3 meter;set sci2.YoYoMaxDepth 60 meter;set sci2.MaxDepth 70 meter;run " ASAP 2016-08-05T06:23:07.939Z,1470378187.939 [CommandLine](IMPORTANT): got command load ./Missions/Science/sci2.xml 2016-08-05T06:23:08.408Z,1470378188.408 [WetLabsBB2FL](FAULT): LCB fault: Software Overcurrent. 2016-08-05T06:23:10.307Z,1470378190.307 [CommandLine](IMPORTANT): Loaded ./Missions/Science/sci2.xml 2016-08-05T06:23:10.559Z,1470378190.559 [MissionManager](IMPORTANT): Started mission Default 2016-08-05T06:23:20.795Z,1470378200.795 [CommandLine](IMPORTANT): got command set sci2.MissionTimeout 24.000000 hour 2016-08-05T06:23:20.796Z,1470378200.796 [CommandLine](IMPORTANT): got command set sci2.NeedCommsTime 150.000000 minute 2016-08-05T06:23:20.797Z,1470378200.797 [CommandLine](IMPORTANT): got command set sci2.Lat1 42.598000 degree 2016-08-05T06:23:20.819Z,1470378200.819 [CommandLine](IMPORTANT): got command set sci2.Lon1 -87.478996 degree 2016-08-05T06:23:20.821Z,1470378200.821 [CommandLine](IMPORTANT): got command set sci2.Lat2 42.225399 degree 2016-08-05T06:23:20.822Z,1470378200.822 [CommandLine](IMPORTANT): got command set sci2.Lon2 -87.576698 degree 2016-08-05T06:23:27.061Z,1470378207.061 [CommandLine](IMPORTANT): got command set sci2.YoYoMinDepth 3.000000 meter 2016-08-05T06:23:27.062Z,1470378207.062 [CommandLine](IMPORTANT): got command set sci2.YoYoMaxDepth 60.000000 meter 2016-08-05T06:23:27.063Z,1470378207.063 [CommandLine](IMPORTANT): got command set sci2.MaxDepth 70.000000 meter 2016-08-05T06:23:27.065Z,1470378207.065 [CommandLine](IMPORTANT): got command run 2016-08-05T06:23:27.070Z,1470378207.070 [CommandLine](IMPORTANT): Running 2016-08-05T06:23:27.334Z,1470378207.334 [MissionManager](IMPORTANT): Started mission sci2 2016-08-05T06:28:28.705Z,1470378508.705 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=40935, MT Status=1, MTMSN=723 2016-08-05T06:28:30.881Z,1470378510.881 [CommandLine](IMPORTANT): got command configSet Express none Rowe_600LCM.height_above_sea_floor persist 2016-08-05T06:41:04.685Z,1470379264.685 [DataOverHttps](IMPORTANT): SBD MTMSN=20160805T064103 2016-08-05T06:41:55.426Z,1470379315.426 [CommandLine](IMPORTANT): got command configSet list 2016-08-05T06:41:55.427Z,1470379315.427 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2016-08-05T06:41:55.430Z,1470379315.430 [CommandLine](IMPORTANT): 2016-08-05T06:41:55.430Z,1470379315.430 [CommandLine](IMPORTANT): CBIT.abortDepth=100 meter; 2016-08-05T06:41:55.430Z,1470379315.430 [CommandLine](IMPORTANT): CBIT.stopDepth=85 meter; 2016-08-05T06:41:55.430Z,1470379315.430 [CommandLine](IMPORTANT): Experss linearApprox WetLabsBB2FL.bin_mean_mass_concentration_of_chlorophyll_in_sea_water 2 ug/l; 2016-08-05T06:41:55.430Z,1470379315.430 [CommandLine](IMPORTANT): Express none CBIT.empiricalFaultElevOffset; 2016-08-05T06:41:55.431Z,1470379315.431 [CommandLine](IMPORTANT): Express linearApproximation CTD_NeilBrown.bin_mean_sea_water_temperature 5.000000 kelvin; 2016-08-05T06:41:55.431Z,1470379315.431 [CommandLine](IMPORTANT): Express none Rowe_600LCM.height_above_sea_floor; 2016-08-05T06:41:55.431Z,1470379315.431 [CommandLine](IMPORTANT): Express none StratificationFrontDetector.front; 2016-08-05T06:41:55.431Z,1470379315.431 [CommandLine](IMPORTANT): Express none VerticalTemperatureHomogeneityIndexCalculator.vertical_temperature_homogeneity_index; 2016-08-05T06:41:55.431Z,1470379315.431 [CommandLine](IMPORTANT): Express linearApproximation WetLabsBB2FL.bin_mean_mass_concentration_of_chlorophyll_in_sea_water 0.500000 microgram_per_liter; 2016-08-05T06:41:55.431Z,1470379315.431 [CommandLine](IMPORTANT): Express linearApproximation depth 3.000000 meter; 2016-08-05T06:41:55.431Z,1470379315.431 [CommandLine](IMPORTANT): Express linearApproximation latitude 0.005000 angular_degree; 2016-08-05T06:41:55.432Z,1470379315.432 [CommandLine](IMPORTANT): Express linearApproximation longitude 0.005000 angular_degree; 2016-08-05T06:41:55.432Z,1470379315.432 [CommandLine](IMPORTANT): NavChartDb.cycleTimeout=15 millisecond; 2016-08-05T06:41:55.432Z,1470379315.432 [CommandLine](IMPORTANT): Normal linearApproximation Rowe_600LCM.height_above_sea_floor; 2016-08-05T06:41:55.432Z,1470379315.432 [CommandLine](IMPORTANT): Normal none StratificationFrontDetector.front; 2016-08-05T06:41:55.433Z,1470379315.433 [CommandLine](IMPORTANT): Normal none StratificationFrontDetector.homogeneous; 2016-08-05T06:41:55.433Z,1470379315.433 [CommandLine](IMPORTANT): Normal none VerticalTemperatureHomogeneityIndexCalculator.vertical_temperature_homogeneity_index; 2016-08-05T06:41:55.433Z,1470379315.433 [CommandLine](IMPORTANT): VerticalControl.massDefault=0.85 centimeter; 2016-08-05T06:56:34.895Z,1470380194.895 [sci2:NeedComms:F.Buoyancy:A_Timeout:A](IMPORTANT): buoyancy pump-down timeout at 952.042581 ml 2016-08-05T07:01:06.486Z,1470380466.486 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2016-08-05T07:14:37.445Z,1470381277.445 [CBIT](IMPORTANT): EFC elev offset (n=7200): elevOffset = 0.046815 degree 2016-08-05T08:04:52.479Z,1470384292.479 [CBIT](IMPORTANT): EFC elev offset (n=7200): elevOffset = -0.012755 degree 2016-08-05T08:36:57.810Z,1470386217.810 [Radio_Surface](FAULT): LCB fault: LCB Watchdog Reset. Hardware Overcurrent Shutdown. Current Limiter Activated. 2016-08-05T08:39:21.445Z,1470386361.445 [ThrusterServo](FAULT): Invalid EZ Servo response:"" 2016-08-05T08:39:23.699Z,1470386363.699 [ThrusterServo](FAULT): Thruster failed to initialize 2016-08-05T08:57:36.513Z,1470387456.513 [CBIT](IMPORTANT): EFC elev offset (n=7200): elevOffset = -0.085954 degree 2016-08-05T09:09:49.346Z,1470388189.346 [Radio_Surface](FAULT): LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated. 2016-08-05T09:09:49.754Z,1470388189.754 [CBIT](CRITICAL): Hardware Fault in component: Radio_Surface 2016-08-05T09:09:50.840Z,1470388190.840 [MissionManager](IMPORTANT): Started mission Default 2016-08-05T09:09:51.553Z,1470388191.553 [Aanderaa_O2](FAULT): LCB fault: Software Overcurrent. 2016-08-05T09:19:41.983Z,1470388781.983 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=40939, MT Status=1, MTMSN=724 2016-08-05T09:19:42.877Z,1470388782.877 [CommandLine](IMPORTANT): got command schedule asap "load Science/sci2.xml;set sci2.MissionTimeout 24 hour;set sci2.NeedCommsTime 150 minute;set sci2.Lat1 42.598 degree;set sci2.Lon1 -87.479 degree;set sci2.Lat2 42.2254 degree;set sci2.Lon2 -87.5767 degree" y1v4 1 2.000000 2016-08-05T09:19:42.877Z,1470388782.877 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=y1v4 2016-08-05T09:19:42.879Z,1470388782.879 [CommandLine](IMPORTANT): Scheduled #54 (#1 of 2 with id='y1v4'): "load Science/sci2.xml;set sci2.MissionTimeout 24 hour;set sci2.NeedCommsTime 150 minute;set sci2.Lat1 42.598 degree;set sci2.Lon1 -87.479 degree;set sci2.Lat2 42.2254 degree;set sci2.Lon2 -87.5767 degree" ASAP 2016-08-05T09:20:04.330Z,1470388804.330 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=40940, MT Status=1, MTMSN=725 2016-08-05T09:20:04.958Z,1470388804.958 [CommandLine](IMPORTANT): got command schedule asap "set sci2.YoYoMinDepth 3 meter;set sci2.YoYoMaxDepth 60 meter;set sci2.MaxDepth 70 meter;run " y1v4 2 2.000000 2016-08-05T09:20:04.959Z,1470388804.959 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=y1v4 2016-08-05T09:20:04.961Z,1470388804.961 [CommandLine](IMPORTANT): Scheduled #55 (#2 of 2 with id='y1v4'): "set sci2.YoYoMinDepth 3 meter;set sci2.YoYoMaxDepth 60 meter;set sci2.MaxDepth 70 meter;run " ASAP 2016-08-05T09:20:05.104Z,1470388805.104 [CommandLine](IMPORTANT): got command load ./Missions/Science/sci2.xml 2016-08-05T09:20:07.171Z,1470388807.171 [CommandLine](IMPORTANT): Loaded ./Missions/Science/sci2.xml 2016-08-05T09:20:16.240Z,1470388816.240 [CommandLine](IMPORTANT): got command set sci2.MissionTimeout 24.000000 hour 2016-08-05T09:20:16.242Z,1470388816.242 [CommandLine](IMPORTANT): got command set sci2.NeedCommsTime 150.000000 minute 2016-08-05T09:20:16.243Z,1470388816.243 [CommandLine](IMPORTANT): got command set sci2.Lat1 42.598000 degree 2016-08-05T09:20:16.244Z,1470388816.244 [CommandLine](IMPORTANT): got command set sci2.Lon1 -87.478996 degree 2016-08-05T09:20:16.245Z,1470388816.245 [CommandLine](IMPORTANT): got command set sci2.Lat2 42.225399 degree 2016-08-05T09:20:16.246Z,1470388816.246 [CommandLine](IMPORTANT): got command set sci2.Lon2 -87.576698 degree 2016-08-05T09:20:22.396Z,1470388822.396 [CommandLine](IMPORTANT): got command set sci2.YoYoMinDepth 3.000000 meter 2016-08-05T09:20:22.402Z,1470388822.402 [CommandLine](IMPORTANT): got command set sci2.YoYoMaxDepth 60.000000 meter 2016-08-05T09:20:22.403Z,1470388822.403 [CommandLine](IMPORTANT): got command set sci2.MaxDepth 70.000000 meter 2016-08-05T09:20:22.403Z,1470388822.403 [CommandLine](IMPORTANT): got command run 2016-08-05T09:20:22.409Z,1470388822.409 [CommandLine](IMPORTANT): Running 2016-08-05T09:20:22.445Z,1470388822.445 [MissionManager](IMPORTANT): Started mission sci2 2016-08-05T09:21:23.461Z,1470388883.461 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-08-05T09:21:24.098Z,1470388884.098 [PNI_TCM](FAULT): LCB fault: Software Overcurrent. 2016-08-05T09:32:16.246Z,1470389536.246 [DataOverHttps](IMPORTANT): SBD MTMSN=20160805T093216 2016-08-05T09:32:44.970Z,1470389564.970 [CommandLine](IMPORTANT): got command ! echo 0 > /dev/loadA2 2016-08-05T09:33:45.443Z,1470389625.443 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-08-05T09:33:46.657Z,1470389626.657 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2016-08-05T09:37:49.159Z,1470389869.159 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=40945, MT Status=1, MTMSN=726 2016-08-05T09:37:49.796Z,1470389869.796 [CommandLine](IMPORTANT): got command ! echo 0 > /dev/loadA2 2016-08-05T09:43:24.802Z,1470390204.802 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=40965, MT Status=1, MTMSN=727