tethys Path

trajectory

20231024T220007 [DAT]:No response from remote modem.

20231024T220017 [DAT]:No response from remote modem.

20231024T220028 [DAT]:No response from remote modem.

20231024T220044 [DefaultWithUndock:LeaveDock:B.Undock]:Undocking sequence complete.

20231024T220217 [NanoDVR]:Ack message checksum did not match.

20231024T220422 [CommandExec]:got command ! echo i > /dev/loadC1

20231024T220532 [CommandExec]:got command schedule asap "load Engineering/lineCaptureHoming.tl;set lineCaptureHoming.MissionTimeout 3 h;set lineCaptureHoming.NeedCommsTime 3 h;set lineCaptureHoming.MicromodemCommsInterval 5 h;set lineCaptureHoming.Repeat 4 count" 2tpbo 1 4.000000

20231024T220532 [CommandExec]:Scheduling command #1 of 4 with id=2tpbo

20231024T220532 [CommandExec]:Scheduled #1 (#1 of 4 with id='2tpbo'): "load Engineering/lineCaptureHoming.tl;set lineCaptureHoming.MissionTimeout 3 h;set lineCaptureHoming.NeedCommsTime 3 h;set lineCaptureHoming.MicromodemCommsInterval 5 h;set lineCaptureHoming.Repeat 4 count", ASAP

20231024T220540 [CommandExec]:got command schedule asap "set lineCaptureHoming.WaitOnDockTimeout 60 min;set lineCaptureHoming.TrySlide 1 bool;set lineCaptureHoming.TryWiggle 1 bool;set lineCaptureHoming.TrackingUpdatePeriodMidcourse 10 s" 2tpbo 2 4.000000

20231024T220540 [CommandExec]:Scheduling command #2 of 4 with id=2tpbo

20231024T220540 [CommandExec]:Scheduled #2 (#2 of 4 with id='2tpbo'): "set lineCaptureHoming.WaitOnDockTimeout 60 min;set lineCaptureHoming.TrySlide 1 bool;set lineCaptureHoming.TryWiggle 1 bool;set lineCaptureHoming.TrackingUpdatePeriodMidcourse 10 s", ASAP

20231024T220549 [CommandExec]:got command schedule asap "set lineCaptureHoming.TrackingNumFixesLowPassFilter 1 count;set lineCaptureHoming.RangeUSBL 0.001 m;set lineCaptureHoming.DockingAltitude 7.4 m;set lineCaptureHoming.InvalidAltitudeTimeout 20 min" 2tpbo 3 4.000000

20231024T220549 [CommandExec]:Scheduling command #3 of 4 with id=2tpbo

20231024T220549 [CommandExec]:Scheduled #3 (#3 of 4 with id='2tpbo'): "set lineCaptureHoming.TrackingNumFixesLowPassFilter 1 count;set lineCaptureHoming.RangeUSBL 0.001 m;set lineCaptureHoming.DockingAltitude 7.4 m;set lineCaptureHoming.InvalidAltitudeTimeout 20 min", ASAP

20231024T220558 [CommandExec]:got command schedule asap "set lineCaptureHoming.AltitudeDepthLimit 72 m;set lineCaptureHoming.MinAltitude 4 m;set lineCaptureHoming.MaxDepth 75 m;set lineCaptureHoming:LineCapture.losRateIIRFilterDecay 0.3 n/a;run" 2tpbo 4 4.000000

20231024T220558 [CommandExec]:Scheduled #4 (#4 of 4 with id='2tpbo'): "set lineCaptureHoming.AltitudeDepthLimit 72 m;set lineCaptureHoming.MinAltitude 4 m;set lineCaptureHoming.MaxDepth 75 m;set lineCaptureHoming:LineCapture.losRateIIRFilterDecay 0.3 n/a;run", ASAP

20231024T220558 [CommandExec]:got command load ./Missions/Engineering/lineCaptureHoming.tl

20231024T220558 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Engineering/lineCaptureHoming.tx

20231024T220559 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/Science.tx

20231024T220600 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/StandardEnvelopes.tx

20231024T220601 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/NeedComms.tx

20231024T220601 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/MicromodemComms.tx

20231024T220601 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/LineCapture.tx

20231024T220602 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/StandardEnvelopes.tx

20231024T220603 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/SetNavAcoustic.tx

20231024T220603 [CommandExec]:Loaded ./Missions/Engineering/lineCaptureHoming.tl

20231024T220617 [CommandExec]:got command set lineCaptureHoming.MissionTimeout 3 hour

20231024T220617 [CommandExec]:got command set lineCaptureHoming.NeedCommsTime 3 hour

20231024T220617 [CommandExec]:got command set lineCaptureHoming.MicromodemCommsInterval 5 hour

20231024T220617 [CommandExec]:got command set lineCaptureHoming.Repeat 4 count

20231024T220635 [CommandExec]:got command set lineCaptureHoming.WaitOnDockTimeout 60 minute

20231024T220635 [CommandExec]:got command set lineCaptureHoming.TrySlide 1 bool

20231024T220635 [CommandExec]:got command set lineCaptureHoming.TryWiggle 1 bool

20231024T220635 [CommandExec]:got command set lineCaptureHoming.TrackingUpdatePeriodMidcourse 10 second

20231024T220703 [CommandExec]:got command set lineCaptureHoming.TrackingNumFixesLowPassFilter 1 count

20231024T220703 [CommandExec]:got command set lineCaptureHoming.RangeUSBL 0.001 meter

20231024T220703 [CommandExec]:got command set lineCaptureHoming.DockingAltitude 7.4 meter

20231024T220703 [CommandExec]:got command set lineCaptureHoming.InvalidAltitudeTimeout 20 minute

20231024T220713 [DefaultWithUndock:SurfaceDefault:CheckIn:E]:Default mission has been running for 7.794755 min

20231024T220732 [CommandExec]:got command set lineCaptureHoming.AltitudeDepthLimit 72 meter

20231024T220732 [CommandExec]:got command set lineCaptureHoming.MinAltitude 4 meter

20231024T220732 [CommandExec]:got command set lineCaptureHoming.MaxDepth 75 meter

20231024T220732 [CommandExec]:got command set lineCaptureHoming:LineCapture.losRateIIRFilterDecay 0.3 none

20231024T220732 [CommandExec]:got command run

20231024T220732 [CommandExec]:Running

20231024T220732 [MissionManager]:Started mission lineCaptureHoming

20231024T221400 [RDI_Pathfinder]:only read 1 of 4 data items for bottom velocity. Device response is::BS, -33, #

20231024T221649 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20231024T222441 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20231024T222548 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20231024T223035 filter is initialized with decay: 0.30.

20231024T223037 [DockingStepper]:Initialization uart error serial timeout

20231024T223037 [DockingStepper]:Failed to initialize

20231024T223039 REINIT: LOS rate is nan deg/s. Setting heading cmd to target acoustic bearing of 282.562558 deg.

20231024T223436 [DAT]:#Rx 2: Read range message, but no direction.

20231024T223754 new target range. Approach rate out of bounds.# range: 319.600006 m,# deltaT: 4.284366 s,# deltaX: -27.699982 m,# approachRate: -6.465363 m/s,# rangeRepo size: 4

20231024T223810 [RDI_Pathfinder]:only read 0 of 1 data item for water mass range. Device response is::WD, -27.96, +1088.39, BI, -123, +742, -14,-32768,A#

20231024T223836 [DAT]:#Rx 1: Read range message, but no direction.

20231024T223938 new target range. Approach rate out of bounds.# range: 275.100006 m,# deltaT: 4.031378 s,# deltaX: 29.700012 m,# approachRate: 7.367211 m/s,# rangeRepo size: 4

20231024T224528 [DAT]:#Rx 1: Read range message, but no direction.

20231024T224539 missed at range: 9.00 m. Rolling out.

20231024T224547 [DAT]:Requesting device enable set for address 50.

20231024T224738 [DAT]:Requesting device enable clr for address 50.

20231024T225008 REINIT: LOS rate is -20.703460 deg/s. Setting heading cmd to target acoustic bearing of 69.483870 deg.

20231024T225023 missed at range: 8.90 m. Rolling out.

20231024T225027 [DAT]:Requesting device enable set for address 50.

20231024T225454 [DAT]:Requesting device enable clr for address 50.

20231024T225912 [DAT]:Requesting device enable set for address 50.

20231024T230031 REINIT: LOS rate is -16.964172 deg/s. Setting heading cmd to target acoustic bearing of 277.793956 deg.

20231024T230031 REINIT: LOS rate is -32.815243 deg/s. Setting heading cmd to target acoustic bearing of 277.793956 deg.

20231024T230047 missed at range: 9.90 m. Rolling out.

20231024T230253 [DAT]:Requesting device enable clr for address 50.

20231024T230302 [RDI_Pathfinder]:only read 2 of 4 data items for beam range. Device response is::RA, 0.00,+785, +72,A#

20231024T230308 new target range. Approach rate out of bounds.# range: 106.199997 m,# deltaT: 4.032411 s,# deltaX: -32.300003 m,# approachRate: -8.010097 m/s,# rangeRepo size: 1

20231024T230619 REINIT: LOS rate is 12.781875 deg/s. Setting heading cmd to target acoustic bearing of 333.039069 deg.

20231024T230620 REINIT: LOS rate is 13.852149 deg/s. Setting heading cmd to target acoustic bearing of 333.039069 deg.

20231024T230620 REINIT: LOS rate is 27.325998 deg/s. Setting heading cmd to target acoustic bearing of 333.039069 deg.

20231024T230723 sequence complete at range 0.90 m. Cable present. Reached intercept timeout.

20231024T230731 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Slide state transition from 4 to 1

20231024T231231 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Done checking for power, continuing with slide

20231024T231231 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Slide state transition from 1 to 2

20231024T231231 [DockingStepper]:uart error: serial timeout

20231024T231231 [DockingStepper]:Communications Fault

20231024T231231 [CBIT]:Communications Fault in component: DockingStepper

20231024T231641 [RDI_Pathfinder]:only read 3 of 4 data items for bottom velocity. Device response is::BS, -22, +17, -2#

20231024T231731 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Done sinking

20231024T231731 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Slide state transition from 2 to 3

20231024T231837 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Halfway through wiggle, pitching down next

20231024T231947 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Finished wiggle, pitching up next

20231024T232057 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Halfway through wiggle, pitching down next

20231024T232207 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Finished wiggle, pitching up next

20231024T232316 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Halfway through wiggle, pitching down next

20231024T232426 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Finished wiggle, pitching up next

20231024T232427 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Done wiggling

20231024T232921 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20231024T232927 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Done checking for power, continuing with slide

20231024T232933 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20231024T233428 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Done sinking

20231024T233847 [RDI_Pathfinder]:only read 0 of 4 data items for beam range. Device response is::RA, 0.00, A#

20231024T233939 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20231024T234124 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Done wiggling

20231024T234204 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20231024T234206 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20231024T234218 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20231024T234255 [lineCaptureHoming:Lap:Docked:Docked.Docked]:State switched to DOCKED.

20231024T234255 [lineCaptureHoming:Lap:Docked:Docked.Docked]:Docked! At depth of 68.882095

20231024T234329 [CommandExec]:got command ! /mnt/mmc/LRAUV/Tools/dhcp.sh

20231024T234329 [DAT]:failed to set remote address to 0, device returned 50 instead.

20231024T234329 [DAT]:Communications Fault

20231024T234330 [CBIT]:Communications Fault in component: DAT

20231024T234336 [CommandExec]:Command /mnt/mmc/LRAUV/Tools/dhcp.sh timed out

20231024T234352 [DAT]:failed to set remote address to 0, device returned 50 instead.

20231024T234352 [DAT]:Communications Fault

20231024T234352 [CBIT]:Communications Fault in component: DAT

20231024T234415 [DAT]:failed to set remote address to 0, device returned 50 instead.

20231024T234415 [DAT]:Communications Fault

20231024T234415 [CBIT]:Communications Fault in component: DAT

20231024T234417 [BuoyancyServo]:getPosition uart error serial timeout

20231024T234417 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20231024T234417 [BuoyancyServo]:Communications Fault

20231024T234418 [CBIT]:Communications Fault in component: BuoyancyServo

20231024T234420 [BuoyancyServo]:LCB fault: Current Limiter Activated.

20231024T234420 [BuoyancyServo]:Hardware Fault

20231024T234433 [BuoyancyServo]:getPosition uart error serial timeout

20231024T234433 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20231024T234433 [BuoyancyServo]:Communications Fault

20231024T234433 [CBIT]:Communications Fault in component: BuoyancyServo

20231024T234448 [BuoyancyServo]:getPosition uart error serial timeout

20231024T234448 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20231024T234448 [BuoyancyServo]:Communications Fault

20231024T234449 [CBIT]:Communications Fault in component: BuoyancyServo

20231024T234459 [RDI_Pathfinder]:only read 1 of 4 data items for beam range. Device response is::RA, 0.00, 74.110.53, 3.00, 0.00#

20231024T234522 [BuoyancyServo]:LCB fault: Current Limiter Activated.

20231024T234522 [BuoyancyServo]:Hardware Fault

20231024T234538 [BuoyancyServo]:LCB fault: Current Limiter Activated.

20231024T234538 [BuoyancyServo]:Hardware Fault

20231024T235015 [BPC1]:Failed to receive data from all battery packs.

20231024T235015 [BPC1]:Communications Fault

20231024T235016 [CBIT]:Communications Fault in component: BPC1

20231024T235051 [RDI_Pathfinder]:only read 0 of 1 data item for altitude. Device response is::BD, 0.00#

20231025T000731 [lineCaptureHoming:Lap:Docked:Detach:A]:Breaking off. Range: 0.900000 m .

20231025T000824 [DockingStepper]:uart error: serial timeout

20231025T000824 [DockingStepper]:Communications Fault

20231025T000824 [CBIT]:Communications Fault in component: DockingStepper

20231025T000829 [DockingStepper]:uart error: serial timeout

20231025T000829 [DockingStepper]:Communications Fault

20231025T000829 [CBIT]:Communications Fault in component: DockingStepper

20231025T000841 [lineCaptureHoming:Lap:Docked:Drift:A]:No post-undock waypoint, drifting for 10.000000 min minutes

20231025T001920 [RDI_Pathfinder]:only read 0 of 1 data item for water mass range. Device response is::WD, -135.40, +2371.16, -1,A#

20231025T002508 [RDI_Pathfinder]:only read 0 of 1 data item for altitude. Device response is::BD#

20231025T002542 [DAT]:failed to enter command mode

20231025T003118 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20231025T003302 [RDI_Pathfinder]:only read 0 of 1 data item for water mass range. Device response is::WD, -136.52, 0.00#

20231025T010732 [MissionManager]:Started mission DefaultWithUndock

20231025T010902 [DefaultWithUndock:LeaveDock:B.Undock]:Undocking sequence complete.

20231025T011144 [RDI_Pathfinder]:only read 0 of 1 data item for BIT error. Device response is::TS,000113035.0, +15.4, 0.0,1508.2, 0#

20231025T011256 [RDI_Pathfinder]:only read 0 of 1 data item for altitude. Device response is::BD, -196.26, +3740, 18.00#

20231025T011307 [NAL9602]:Failed to initiate SBD session. Error code: 2

20231025T011357 [NAL9602]:Failed to initiate SBD session. Error code: 2

20231025T011905 [NAL9602]:Failed to initiate SBD session. Error code: 2

20231025T012451 [DefaultWithUndock:SurfaceDefault:CheckIn:E]:Default mission has been running for 17.307813 min

20231025T013154 [DefaultWithUndock:SurfaceDefault:CheckIn:E]:Default mission has been running for 24.358504 min

20231025T013223 [CommandExec]:got command schedule asap "load Transport/keepstation.tl;set keepstation.MissionTimeout 4 h;set keepstation.NeedCommsTime 30 min;set keepstation.ApproachDepth 25 m;set keepstation.DepthDeadband 10 m;set keepstation.Speed 0.8 m/s;set keepstation.Radius 300 m" 2tyo7 1 2.000000

20231025T013223 [CommandExec]:Scheduling command #1 of 2 with id=2tyo7

20231025T013223 [CommandExec]:Scheduled #5 (#1 of 2 with id='2tyo7'): "load Transport/keepstation.tl;set keepstation.MissionTimeout 4 h;set keepstation.NeedCommsTime 30 min;set keepstation.ApproachDepth 25 m;set keepstation.DepthDeadband 10 m;set keepstation.Speed 0.8 m/s;set keepstation.Radius 300 m", ASAP

20231025T013359 [CommandExec]:got command schedule asap "set keepstation:StandardEnvelopes.MinAltitude 9 m;run" 2tyo7 2 2.000000

20231025T013359 [CommandExec]:Scheduling command #2 of 2 with id=2tyo7

20231025T013359 [CommandExec]:Scheduled #6 (#2 of 2 with id='2tyo7'): "set keepstation:StandardEnvelopes.MinAltitude 9 m;run", ASAP

20231025T013359 [CommandExec]:got command load ./Missions/Transport/keepstation.tl

20231025T013359 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Transport/keepstation.tx

20231025T013400 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/NeedComms.tx

20231025T013400 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/StandardEnvelopes.tx

20231025T013400 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/BackseatDriver.tx

20231025T013400 [CommandExec]:Loaded ./Missions/Transport/keepstation.tl

20231025T013417 [CommandExec]:got command set keepstation.MissionTimeout 4 hour

20231025T013417 [CommandExec]:got command set keepstation.NeedCommsTime 30 minute

20231025T013417 [CommandExec]:got command set keepstation.ApproachDepth 25 meter

20231025T013417 [CommandExec]:got command set keepstation.DepthDeadband 10 meter

20231025T013417 [CommandExec]:got command set keepstation.Speed 0.8 meter_per_second

20231025T013417 [CommandExec]:got command set keepstation.Radius 300 meter

20231025T013421 [CommandExec]:got command set keepstation:StandardEnvelopes.MinAltitude 9 meter

20231025T013421 [CommandExec]:got command run

20231025T013421 [CommandExec]:Running

20231025T013421 [MissionManager]:Started mission keepstation

20231025T013517 [CommandExec]:got command stop

20231025T013517 [CommandExec]:Scheduling is paused

20231025T013517 [MissionManager]:Started mission DefaultWithUndock

20231025T013555 [DockingStepper]:Initialization uart error serial timeout

20231025T013555 [DockingStepper]:Failed to initialize

20231025T013642 [DefaultWithUndock:LeaveDock:B.Undock]:Undocking sequence complete.

20231025T013709 [CommandExec]:got command resume

20231025T013709 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Transport/keepstation.tx

20231025T013709 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/NeedComms.tx

20231025T013709 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/BackseatDriver.tx

20231025T013709 [MissionManager]:Resuming from info in Logs/20231024T215437/Transport_keepstation_tl.state

20231025T013709 [CommandExec]:Resuming mission and schedule

20231025T013709 [CommandExec]:Scheduling is resumed

20231025T013710 [MissionManager]:Started mission keepstation

20231025T013811 [NanoDVR]:serial timeout

20231025T014032 [RDI_Pathfinder]:No DVL communication! Re-initializing

20231025T014032 [RDI_Pathfinder]:Communications Fault

20231025T014032 [CBIT]:Communications Fault in component: RDI_Pathfinder

20231025T014034 [RDI_Pathfinder]:Expecting PD13 message format

20231025T020146 [RDI_Pathfinder]:only read 3 of 4 data items for beam range. Device response is::RA, 0.00, 448.47, 393.18, 430+133, +56, -48,A#

20231025T022107 [CommandExec]:got command load ./Missions/Transport/transit.tl

20231025T022107 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Transport/transit.tx

20231025T022108 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/BackseatDriver.tx

20231025T022108 [CommandExec]:Loaded ./Missions/Transport/transit.tl

20231025T022109 [MissionManager]:Started mission DefaultWithUndock

20231025T022115 [CommandExec]:got command set transit.MissionTimeout 30 minute

20231025T022115 [CommandExec]:got command set transit.Latitude 36.77083 degree

20231025T022115 [CommandExec]:got command set transit.Longitude -121.85376 degree

20231025T022115 [CommandExec]:got command run

20231025T022115 [CommandExec]:Running

20231025T022115 [MissionManager]:Started mission transit

20231025T022117 [transit:Transit:Wpt1.Waypoint]:Navigating to waypoint: 36.770828,-121.853760

20231025T024100 [NAL9602]:Timeout waiting for SBDI response.

20231025T024100 [CBIT]:Data Fault in component: NAL9602

20231025T024707 [CommandExec]:got command ! ifconfig

20231025T024707 [CommandExec]:eth0 Link encap:Ethernet HWaddr 50:2D:F4:07:45:48 # UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1# RX packets:2620 errors:1 dropped:0 overruns:0 frame:1# TX packets:2819 errors:0 dropped:0 overruns:0 carrier:0# collisions:9 txqueuelen:1000 # RX bytes:587104 (573.3 Kb) TX bytes:415578 (405.8 Kb)# Interrupt:29 # # lo Link encap:Local Loopback # inet addr:127.0.0.1 Mask:255.0.0.0# UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1# RX packets:409 errors:0 dropped:0 overruns:0 frame:0# TX packets:409 errors:0 dropped:0 overruns:0 carrier:0# collisions:0 txqueuelen:0 # RX bytes:31464 (30.7 Kb) TX bytes:31464 (30.7 Kb)# #

20231025T025436 [CommandExec]:got command ! /mnt/mmc/LRAUV/Tools/dhcp.sh &

20231025T025437 [CommandExec]:udhcpc (v1.11.2) started# Sending discover...# Sending select for 10.89.6.2...# Lease of 10.89.6.2 obtained, lease time 43200# Deleting routers# adding dns 10.89.6.1#

20231025T030505 [CommandExec]:got command restart system

20231025T030509 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).