tethys Path

trajectory

20220512T170602 [CBIT]:Could not open coulomb counter log file

20220512T170633 [CBIT]:Could not open coulomb counter log file

20220512T170703 [CBIT]:Could not open coulomb counter log file

20220512T171043 [DefaultWithUndock:SurfaceDefault:CheckIn:E]:Default mission has been running for 75.761564 min

20220512T171547 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20220512T171623 [DefaultWithUndock:SurfaceDefault:CheckIn:E]:Default mission has been running for 81.430892 min

20220512T171656 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20220512T171839 [NAL9602]:Failed to initiate SBD session. Error code: 2

20220512T171938 [NAL9602]:Failed to initiate SBD session. Error code: 2

20220512T172023 [DropWeight]:DROP WEIGHT MISSING.#

20220512T172023 [DropWeight]:Hardware Fault

20220512T172023 [CBIT]:Hardware Fault in component: DropWeight

20220512T172127 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20220512T172203 [DefaultWithUndock:SurfaceDefault:CheckIn:E]:Default mission has been running for 87.107048 min

20220512T172236 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20220512T172708 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20220512T173947 [NAL9602]:Failed to initiate SBD session. Error code: 2

20220512T174519 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20220512T174714 [RDI_Pathfinder]:only read 0 of 1 data item for BIT error

20220512T175129 [CBIT]:Fuelgauge reading: 0#

20220512T180525 [DropWeight]:DROP WEIGHT MISSING.#

20220512T180525 [DropWeight]:Hardware Fault

20220512T180525 [CBIT]:Hardware Fault in component: DropWeight

20220512T180600 [RDI_Pathfinder]:only read 0 of 1 data item for BIT error

20220512T180821 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20220512T183252 [RDI_Pathfinder]:only read -1 of 1 data item for BIT error

20220512T185026 [DropWeight]:DROP WEIGHT MISSING.#

20220512T185026 [DropWeight]:Hardware Fault

20220512T185026 [CBIT]:Hardware Fault in component: DropWeight

20220512T191407 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20220512T192009 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20220512T194500 [RDI_Pathfinder]:only read 0 of 4 data items

20220512T202536 [RDI_Pathfinder]:only read 0 of 1 data item for BIT error

20220512T202820 [RDI_Pathfinder]:only read 0 of 1 data item for water mass range.

20220512T203428 [RDI_Pathfinder]:only read 2 of 4 data items

20220512T213407 [CommandExec]:got command failComponent hardware DockingServo

20220512T213407 [DockingServo]:Hardware Fault

20220512T213407 [CommandExec]:DockingServo failureMode is Hardware Fault

20220512T213407 [CBIT]:Hardware Fault in component: DockingServo

20220512T213423 [CommandExec]:got command DockingServo arm

20220512T213423 [CommandExec]:Switching docking moudle to ARM.

20220512T213717 [CommandExec]:got command DockingServo standby

20220512T213717 [CommandExec]:Switching docking moudle to STANDBY.

20220512T213723 [CommandExec]:got command ! echo 1 > /dev/loadC3

20220512T213803 [CommandExec]:got command DockingServo arm

20220512T213803 [CommandExec]:Switching docking moudle to ARM.

20220512T213825 [CommandExec]:got command DockingServo standby

20220512T213825 [CommandExec]:Switching docking moudle to STANDBY.

20220512T213833 [CommandExec]:got command DockingServo arm

20220512T213833 [CommandExec]:Switching docking moudle to ARM.

20220512T214134 [CommandExec]:got command DockingServo standby

20220512T214134 [CommandExec]:Switching docking moudle to STANDBY.

20220512T214139 [CommandExec]:got command ! echo i > /dev/loadC3

20220512T214236 [RDI_Pathfinder]:only read 0 of 1 data item for water mass range.

20220512T214722 [CommandExec]:got command ! echo 1 > /dev/loadC3

20220512T215023 [DockingServo]:Overload Error

20220512T215023 [DockingServo]:Hardware Fault

20220512T215023 [CBIT]:Hardware Fault in component: DockingServo

20220512T215029 [DockingServo]:Overload Error

20220512T215029 [DockingServo]:Hardware Fault

20220512T215029 [CBIT]:Hardware Fault in component: DockingServo

20220512T215129 [DockingServo]:Overload Error

20220512T215213 [CBIT]:Beginning ground fault scan

20220512T215243 [CommandExec]:got command failComponent

20220512T215243 [CommandExec]:Failed components:

20220512T215243 [CommandExec]:DropWeight: Hardware Fault

20220512T215257 [CommandExec]:got command failComponent hardware DockingServo

20220512T215257 [CommandExec]:DockingServo failureMode is Hardware Fault

20220512T215748 [CommandExec]:got command failComponent

20220512T215748 [CommandExec]:Failed components:

20220512T215748 [CommandExec]:DropWeight: Hardware Fault

20220512T220618 [CommandExec]:got command ! echo i > /dev/loadC3

20220512T221028 [RDI_Pathfinder]:only read 0 of 4 data items

20220512T221431 [CommandExec]:got command failComponent hardware DockingServo

20220512T221431 [CommandExec]:DockingServo failureMode is Hardware Fault

20220512T224243 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20220512T230443 [CommandExec]:got command maintain control SpeedControl.propOmegaAction 10 revolution_per_minute

20220512T230510 [CommandExec]:got command maintain control SpeedControl.propOmegaAction 25 revolution_per_minute

20220512T230533 [CommandExec]:got command maintain control SpeedControl.propOmegaAction 50 revolution_per_minute

20220512T230614 [CommandExec]:got command ! echo 1 > /dev/loadC3

20220512T230631 [CommandExec]:got command strobe on

20220512T230631 [CommandExec]:Activating strobe

20220512T230720 [DockingServo]:LCB fault: Hardware Overcurrent Shutdown.

20220512T230751 [CommandExec]:got command maintain control SpeedControl.speedCmd 100 revolution_per_minute

20220512T230807 [CommandExec]:got command maintain control SpeedControl.speedCmd 125 revolution_per_minute

20220512T231102 [ThrusterHE]:Status lock Detected.

20220512T231103 [ThrusterHE]:Status lock Detected.

20220512T231104 [ThrusterHE]:Status lock Detected.

20220512T231112 [ThrusterHE]:Lock Detect. Motor stopped spinning or could not start spinning.

20220512T231112 [ThrusterHE]:Hardware Fault

20220512T231112 [CBIT]:Hardware Fault in component: ThrusterHE

20220512T231119 [ThrusterHE]:Zero Speed Commanded.

20220512T231131 [CommandExec]:got command maintain clear

20220512T231214 [ThrusterHE]:Lock Detect. Motor stopped spinning or could not start spinning.

20220512T231214 [ThrusterHE]:Hardware Fault

20220512T231214 [CBIT]:Hardware Fault in component: ThrusterHE

20220512T231229 [CommandExec]:got command maintain clear

20220512T231256 [ThrusterHE]:Lock Detect. Motor stopped spinning or could not start spinning.

20220512T231256 [ThrusterHE]:Hardware Fault

20220512T231256 [CBIT]:Hardware Fault in component: ThrusterHE

20220512T231258 [CommandExec]:got command maintain clear

20220512T231303 [CommandExec]:got command failComponent hardware ThrusterHE

20220512T231303 [CommandExec]:ThrusterHE failureMode is Hardware Fault

20220512T231325 [CommandExec]:got command maintain control SpeedControl.speedCmd 150 revolution_per_minute

20220512T231515 [ThrusterHE]:Zero Speed Commanded.

20220512T232144 [CommandExec]:got command ! echo i > /dev/loadC3

20220512T235013 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20220513T000108 [RDI_Pathfinder]:only read 0 of 1 data item for water mass range.

20220513T000138 [NAL9602]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20220513T000138 [CBIT]:Hardware Fault in component: NAL9602

20220513T000721 [NAL9602]:parseGSV uart error: serial timeout

20220513T015750 [BPC1]:BPC1B failed to open uart with error: cannot open serial port

20220513T015750 [BPC1]:Communications Fault

20220513T015750 [CBIT]:Communications Fault in component: BPC1

20220513T015756 [DataOverHttps]:Hardware Fault

20220513T015756 [DataOverHttps]:Error creating socket due to error #24: Too many open files

20220513T015757 [CBIT]:Hardware Fault in component: DataOverHttps

20220513T015914 [RDI_Pathfinder]:only read 0 of 1 data item for altitude

20220513T020751 [BPC1]:BPC1A failed to open uart with error: cannot open serial port

20220513T020751 [BPC1]:BPC1B failed to open uart with error: cannot open serial port

20220513T020751 [BPC1]:Communications Fault

20220513T020751 [CBIT]:Communications Fault in component: BPC1

20220513T021112 [RDI_Pathfinder]:only read 0 of 1 data item for altitude

20220513T021258 [DataOverHttps]:Hardware Fault

20220513T021258 [DataOverHttps]:Error creating socket due to error #24: Too many open files

20220513T021258 [CBIT]:Hardware Fault in component: DataOverHttps

20220513T021752 [BPC1]:BPC1A failed to open uart with error: cannot open serial port

20220513T021752 [BPC1]:BPC1B failed to open uart with error: cannot open serial port

20220513T021752 [BPC1]:Communications Fault

20220513T021752 [CBIT]:Communications Fault in component: BPC1

20220513T022458 [NAL9602]:Inadequate Iridium signal strength reported: 0

20220513T022503 [NAL9602]:Inadequate Iridium signal strength reported: 0

20220513T022511 [NAL9602]:Inadequate Iridium signal strength reported: 0

20220513T022754 [BPC1]:BPC1A failed to open uart with error: cannot open serial port

20220513T022759 [DataOverHttps]:Hardware Fault

20220513T022759 [DataOverHttps]:Error creating socket due to error #24: Too many open files

20220513T022759 [CBIT]:Hardware Fault in component: DataOverHttps

20220513T035225 [CBIT]:Beginning ground fault scan

20220513T035637 [BuoyancyServo]:getPosition uart error serial timeout

20220513T035637 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20220513T035637 [BuoyancyServo]:Communications Fault

20220513T035637 [CBIT]:Communications Fault in component: BuoyancyServo

20220513T035640 [BuoyancyServo]:Initialization error opening port: cannot open serial port

20220513T035641 [BuoyancyServo]:Buoyancy initialization uart error serial timeout

20220513T035641 [BuoyancyServo]:Buoyancy failed to initialize

20220513T035641 [BuoyancyServo]:Communications Fault

20220513T035642 [CBIT]:Communications Fault in component: BuoyancyServo

20220513T035646 [BuoyancyServo]:Initialization error opening port: cannot open serial port

20220513T035647 [BuoyancyServo]:Buoyancy initialization uart error serial timeout

20220513T035647 [BuoyancyServo]:Buoyancy failed to initialize

20220513T035647 [BuoyancyServo]:Communications Fault

20220513T035647 [CBIT]:Communications Fault in component: BuoyancyServo

20220513T035651 [BuoyancyServo]:Initialization error opening port: cannot open serial port

20220513T035653 [BuoyancyServo]:Buoyancy initialization uart error serial timeout

20220513T035653 [BuoyancyServo]:Buoyancy failed to initialize

20220513T043510 [RDI_Pathfinder]:only read 0 of 1 data item for altitude

20220513T095236 [CBIT]:Beginning ground fault scan

20220513T123456 [RDI_Pathfinder]:DVL uart error: serial timeout

20220513T123456 [RDI_Pathfinder]:Communications Fault

20220513T123456 [CBIT]:Communications Fault in component: RDI_Pathfinder

20220513T123457 [RDI_Pathfinder]:Expecting PD13 message format

20220513T151549 [RDI_Pathfinder]:DVL uart error: serial timeout

20220513T151549 [RDI_Pathfinder]:Communications Fault

20220513T151549 [CBIT]:Communications Fault in component: RDI_Pathfinder

20220513T151550 [RDI_Pathfinder]:Expecting PD13 message format

20220513T195824 [RDI_Pathfinder]:only read -1 of 1 data item for altitude

20220513T210336 [CommandExec]:got command burn on

20220513T210336 [CommandExec]:Activating dropweight wire

20220513T210337 weight due to communications timeout.

20220513T230841 [CommandExec]:got command burn on

20220513T230841 [CommandExec]:Activating dropweight wire

20220513T230841 weight due to communications timeout.

20220513T232411 [CommandExec]:got command quit