tethys Path

trajectory

20141218T235430 [NAL9602]:Failed to initiate SBD session. Error code: 2

20141218T235506 [MissionManager]:Started mission Default

20141218T235545 [NAL9602]:Failed to initiate SBD session. Error code: 2

20141218T235557 [DVL_micro]:DVL failed to acquire valid data within timeout.

20141218T235557 [DVL_micro]:Data Fault

20141218T235557 [CBIT]:Data Fault in component: DVL_micro

20141218T235604 [NAL9602]:Buffer populated but no message sent from NAL9602. Error code: 0

20141218T235621 [NAL9602]:Failed to initiate SBD session. Error code: 2

20141218T235639 [NAL9602]:Buffer populated but no message sent from NAL9602. Error code: 0

20141218T235650 [NAL9602]:Buffer populated but no message sent from NAL9602. Error code: 0

20141218T235746 mission has been running for 2.658414 min

20141218T235903 [DVL_micro]:DVL failed to acquire valid data within timeout.

20141218T235903 [DVL_micro]:Data Fault

20141218T235903 [CBIT]:Data Fault in component: DVL_micro

20141218T235904 [DVL_micro]:LCB fault: Software Overcurrent.

20141218T235904 [DVL_micro]:Hardware Fault

20141219T000022 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20141219T000030 [HFRadarModelCalc]:Forecast time 20141218T210000 published

20141219T000033 [HFRadarCompactModelForecaster]:forecast time 201412182100 published

20141219T000037 [DVL_micro]:No DVL communication! Re-initializing

20141219T000037 [DVL_micro]:Communications Fault

20141219T000037 [CBIT]:Communications Fault in component: DVL_micro

20141219T000047 [DVL_micro]:LCB fault: Software Overcurrent.

20141219T000047 [DVL_micro]:Hardware Fault

20141219T000217 [DVL_micro]:DVL failed to acquire valid data within timeout.

20141219T000217 [DVL_micro]:Data Fault

20141219T000217 [CBIT]:Data Fault in component: DVL_micro

20141219T000252 mission has been running for 7.678575 min

20141219T000539 [NAL9602]:GPS failed to acquire within timeout.

20141219T000539 [CBIT]:Data Fault in component: NAL9602

20141219T000628 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20141219T000628 [CBIT]:Data Fault in component: NAL9602

20141219T000718 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20141219T000719 [CBIT]:Data Fault in component: NAL9602

20141219T000747 mission has been running for 12.680419 min

20141219T001048 [HFRadarModelCalc]:Forecast time 20141218T210000 published

20141219T001059 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20141219T001602 [NAL9602]:GPS failed to acquire within timeout.

20141219T001651 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20141219T001652 [CommandLine]:Scheduling is paused

20141219T001857 [DVL_micro]:LCB fault: Software Overcurrent.

20141219T001857 [DVL_micro]:Hardware Fault

20141219T002107 [HFRadarModelCalc]:Forecast time 20141218T210000 published

20141219T002123 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20141219T002620 [NAL9602]:GPS failed to acquire within timeout.

20141219T021348 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 15 of 46

20141219T022516 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 30 of 46

20141219T022520 [DVL_micro]:NQ1 string checksum mismatch. Reported:89 Calculated:85

20141219T024359 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 39 of 46

20141219T035402 [AHRS_sp3003D]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20141219T035402 [CBIT]:Hardware Fault in component: AHRS_sp3003D

20141219T035412 [AHRS_sp3003D]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20141219T055322 [CBIT]:Beginning GF scan

20141219T061339 [DVL_micro]:No DVL communication! Re-initializing

20141219T061339 [DVL_micro]:Communications Fault

20141219T061340 [CBIT]:Communications Fault in component: DVL_micro

20141219T062711 [DVL_micro]:LCB fault: Current Limiter Activated.

20141219T065930 [AHRS_sp3003D]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20141219T065930 [CBIT]:Hardware Fault in component: AHRS_sp3003D

20141219T115348 [CBIT]:Beginning GF scan

20141219T165241 [Radio_CDMA]:Starting PPPD with command:/sbin/pppd /dev/ttyTX1 115200 connect "exec /sbin/chat -v -f /etc/ppp/verizon-attach.chat" disconnect "exec /sbin/chat -v -f /etc/ppp/verizon-detach.chat" lock nocrtscts local passive defaultroute noipdefault ipcp-accept-local usepeerdns noauth persist holdoff 5 maxfail 0

20141219T165357 [CommandLine]:got command quit