2023-07-16T14:00:00.010Z,1689516000.010 [CommandExec](IMPORTANT): got command ubat off 2023-07-16T14:00:00.011Z,1689516000.011 [CommandExec](IMPORTANT): Disabling UBAT. 2023-07-16T14:00:00.011Z,1689516000.011 [CommandExec](IMPORTANT): got command restart logs 2023-07-16T14:04:03.380Z,1689516243.380 [RudderServo](FAULT): Rudder uart error - getPosition..serial timeout 2023-07-16T14:15:40.638Z,1689516940.638 [ElevatorOffsetCalculator](IMPORTANT): Completed estimation for commanded vars: speed 1.00 m/s, pitch 20.00 deg, mass-position 6.33 mm. Average elevator angle=-2.024117 +/- 0.091902 deg (conf. level 99.90%, sigma: 0.335931 deg). 2023-07-16T16:48:55.070Z,1689526135.070 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=28717, MT Status=1, MTMSN=1523 2023-07-16T16:48:55.837Z,1689526135.837 [CommandExec](IMPORTANT): got command schedule asap "load Science/sci2.tl;set sci2.MissionTimeout 24 h;set sci2.Lat1 36.69369 degree;set sci2.Lon1 -121.9997 degree;set sci2.Lat2 36.75 degree;set sci2.Lon2 -122.022 degree;set sci2.Speed 0.8 m/s;set sci2.YoYoMaxDepth 50 m" 2t7ig 1 2.000000 2023-07-16T16:48:55.838Z,1689526135.838 [CommandExec](IMPORTANT): Scheduling command #1 of 2 with id=2t7ig 2023-07-16T16:48:55.839Z,1689526135.839 [CommandExec](IMPORTANT): Scheduled #5 (#1 of 2 with id='2t7ig'): "load Science/sci2.tl;set sci2.MissionTimeout 24 h;set sci2.Lat1 36.69369 degree;set sci2.Lon1 -121.9997 degree;set sci2.Lat2 36.75 degree;set sci2.Lon2 -122.022 degree;set sci2.Speed 0.8 m/s;set sci2.YoYoMaxDepth 50 m", ASAP 2023-07-16T16:49:36.706Z,1689526176.706 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=28718, MT Status=1, MTMSN=1524 2023-07-16T16:49:37.306Z,1689526177.306 [CommandExec](IMPORTANT): got command schedule asap "set sci2.MaxDepth 70 m;run" 2t7ig 2 2.000000 2023-07-16T16:49:37.307Z,1689526177.307 [CommandExec](IMPORTANT): Scheduling command #2 of 2 with id=2t7ig 2023-07-16T16:49:37.308Z,1689526177.308 [CommandExec](IMPORTANT): Scheduled #6 (#2 of 2 with id='2t7ig'): "set sci2.MaxDepth 70 m;run", ASAP 2023-07-16T16:49:37.421Z,1689526177.421 [CommandExec](IMPORTANT): got command load ./Missions/Science/sci2.tl 2023-07-16T16:49:37.567Z,1689526177.567 [MissionManager](IMPORTANT): Loading Compiled TethysL script from file ./Missions/Science/sci2.tx 2023-07-16T16:49:40.498Z,1689526180.498 [CommandExec](IMPORTANT): Loaded ./Missions/Science/sci2.tl 2023-07-16T16:49:40.739Z,1689526180.739 [MissionManager](IMPORTANT): Started mission Default 2023-07-16T16:49:49.299Z,1689526189.299 [CommandExec](IMPORTANT): got command set sci2.MissionTimeout 24 hour 2023-07-16T16:49:49.300Z,1689526189.300 [CommandExec](IMPORTANT): got command set sci2.Lat1 36.69369 degree 2023-07-16T16:49:49.301Z,1689526189.301 [CommandExec](IMPORTANT): got command set sci2.Lon1 -121.9997 degree 2023-07-16T16:49:49.301Z,1689526189.301 [CommandExec](IMPORTANT): got command set sci2.Lat2 36.75 degree 2023-07-16T16:49:49.302Z,1689526189.302 [CommandExec](IMPORTANT): got command set sci2.Lon2 -122.022 degree 2023-07-16T16:49:49.303Z,1689526189.303 [CommandExec](IMPORTANT): got command set sci2.Speed 0.8 meter_per_second 2023-07-16T16:49:49.303Z,1689526189.303 [CommandExec](IMPORTANT): got command set sci2.YoYoMaxDepth 50 meter 2023-07-16T16:49:50.698Z,1689526190.698 [CommandExec](IMPORTANT): got command set sci2.MaxDepth 70 meter 2023-07-16T16:49:50.698Z,1689526190.698 [CommandExec](IMPORTANT): got command run 2023-07-16T16:49:50.700Z,1689526190.700 [CommandExec](IMPORTANT): Running 2023-07-16T16:49:50.838Z,1689526190.838 [MissionManager](IMPORTANT): Started mission sci2 2023-07-16T16:49:51.238Z,1689526191.238 [ElevatorOffsetCalculator](IMPORTANT): Completed estimation for commanded vars: speed 1.00 m/s, pitch -20.00 deg, mass-position 6.33 mm. Average elevator angle=1.782184 +/- 0.096709 deg (conf. level 99.90%, sigma: 0.359213 deg). 2023-07-16T16:50:26.851Z,1689526226.851 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=28719, MT Status=1, MTMSN=1525 2023-07-16T16:50:27.608Z,1689526227.608 [CommandExec](IMPORTANT): got command schedule asap "load Science/sci2.tl;set sci2.MissionTimeout 24 h;set sci2.Lat1 36.69369 degree;set sci2.Lon1 -121.9997 degree;set sci2.Lat2 36.75 degree;set sci2.Lon2 -122.022 degree;set sci2.Speed 1 m/s;set sci2.YoYoMaxDepth 50 m" 2t7pu 1 2.000000 2023-07-16T16:50:27.609Z,1689526227.609 [CommandExec](IMPORTANT): Scheduling command #1 of 2 with id=2t7pu 2023-07-16T16:50:27.610Z,1689526227.610 [CommandExec](IMPORTANT): Scheduled #7 (#1 of 2 with id='2t7pu'): "load Science/sci2.tl;set sci2.MissionTimeout 24 h;set sci2.Lat1 36.69369 degree;set sci2.Lon1 -121.9997 degree;set sci2.Lat2 36.75 degree;set sci2.Lon2 -122.022 degree;set sci2.Speed 1 m/s;set sci2.YoYoMaxDepth 50 m", ASAP 2023-07-16T16:51:00.075Z,1689526260.075 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=28720, MT Status=1, MTMSN=1526 2023-07-16T16:51:00.649Z,1689526260.649 [CommandExec](IMPORTANT): got command schedule asap "set sci2.MaxDepth 70 m;run" 2t7pu 2 2.000000 2023-07-16T16:51:00.649Z,1689526260.649 [CommandExec](IMPORTANT): Scheduling command #2 of 2 with id=2t7pu 2023-07-16T16:51:00.650Z,1689526260.650 [CommandExec](IMPORTANT): Scheduled #8 (#2 of 2 with id='2t7pu'): "set sci2.MaxDepth 70 m;run", ASAP 2023-07-16T16:51:00.761Z,1689526260.761 [CommandExec](IMPORTANT): got command load ./Missions/Science/sci2.tl 2023-07-16T16:51:00.853Z,1689526260.853 [MissionManager](IMPORTANT): Loading Compiled TethysL script from file ./Missions/Science/sci2.tx 2023-07-16T16:51:03.267Z,1689526263.267 [CommandExec](IMPORTANT): Loaded ./Missions/Science/sci2.tl 2023-07-16T16:51:03.339Z,1689526263.339 [MissionManager](IMPORTANT): Started mission Default 2023-07-16T16:51:12.214Z,1689526272.214 [CommandExec](IMPORTANT): got command set sci2.MissionTimeout 24 hour 2023-07-16T16:51:12.215Z,1689526272.215 [CommandExec](IMPORTANT): got command set sci2.Lat1 36.69369 degree 2023-07-16T16:51:12.215Z,1689526272.215 [CommandExec](IMPORTANT): got command set sci2.Lon1 -121.9997 degree 2023-07-16T16:51:12.245Z,1689526272.245 [CommandExec](IMPORTANT): got command set sci2.Lat2 36.75 degree 2023-07-16T16:51:12.245Z,1689526272.245 [CommandExec](IMPORTANT): got command set sci2.Lon2 -122.022 degree 2023-07-16T16:51:12.246Z,1689526272.246 [CommandExec](IMPORTANT): got command set sci2.Speed 1 meter_per_second 2023-07-16T16:51:12.247Z,1689526272.247 [CommandExec](IMPORTANT): got command set sci2.YoYoMaxDepth 50 meter 2023-07-16T16:51:13.553Z,1689526273.553 [CommandExec](IMPORTANT): got command set sci2.MaxDepth 70 meter 2023-07-16T16:51:13.554Z,1689526273.554 [CommandExec](IMPORTANT): got command run 2023-07-16T16:51:13.555Z,1689526273.555 [CommandExec](IMPORTANT): Running 2023-07-16T16:51:13.855Z,1689526273.855 [MissionManager](IMPORTANT): Started mission sci2 2023-07-16T16:54:24.385Z,1689526464.385 [sci2:Lap:Wpt1:A.Waypoint](IMPORTANT): Navigating to waypoint: 36.693691,-121.999702 2023-07-16T17:37:38.849Z,1689529058.849 [CBIT](IMPORTANT): Beginning ground fault scan 2023-07-16T17:37:49.927Z,1689529069.927 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.027573 CHAN A1 (24V): 0.063976 CHAN A2 (12V): 0.021525 CHAN A3 (5V): 0.007325 CHAN B0 (3.3V): 0.006914 CHAN B1 (3.15aV): 0.006220 CHAN B2 (3.15bV): 0.005528 CHAN B3 (GND): 0.000573 OPEN: 0.007246 Full Scale: +/- 1 mA 2023-07-16T19:29:39.369Z,1689535779.369 [RudderServo](FAULT): Rudder uart error - getPosition..serial timeout 2023-07-16T20:56:08.950Z,1689540968.950 [ThrusterServo](FAULT): Invalid EZ Servo response:"" 2023-07-16T21:28:49.973Z,1689542929.973 [ElevatorOffsetCalculator](IMPORTANT): Completed estimation for commanded vars: speed 1.00 m/s, pitch -20.00 deg, mass-position 6.33 mm. Average elevator angle=1.702314 +/- 0.099109 deg (conf. level 99.90%, sigma: 0.366346 deg). 2023-07-16T22:05:55.972Z,1689545155.972 [RudderServo](FAULT): Rudder uart error - getPosition..serial timeout 2023-07-16T22:05:56.894Z,1689545156.894 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:05:58.404Z,1689545158.404 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T22:05:59.369Z,1689545159.369 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:06:00.812Z,1689545160.812 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T22:06:00.853Z,1689545160.853 [CBIT](CRITICAL): Communications Fault in component: RudderServo 2023-07-16T22:06:00.954Z,1689545160.954 [CommandExec](FAULT): Scheduling is paused 2023-07-16T22:06:01.722Z,1689545161.722 [MissionManager](IMPORTANT): Started mission Default 2023-07-16T22:06:01.750Z,1689545161.750 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:06:03.252Z,1689545163.252 [ElevatorServo](FAULT): Elevator uart error - getPosition.serial timeout 2023-07-16T22:06:03.556Z,1689545163.556 [MassServo](FAULT): Mass Shifter uart error: serial timeout 2023-07-16T22:06:04.465Z,1689545164.465 [MassServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:06:06.824Z,1689545166.824 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout 2023-07-16T22:06:07.781Z,1689545167.781 [MassServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:06:08.393Z,1689545168.393 [DataOverHttps](FAULT): Error creating socket due to error #24: Too many open files 2023-07-16T22:06:08.596Z,1689545168.596 [CBIT](FAULT): Hardware Fault in component: DataOverHttps 2023-07-16T22:06:10.468Z,1689545170.468 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout 2023-07-16T22:06:14.128Z,1689545174.128 [ElevatorServo](FAULT): Elevator uart error - getPosition.serial timeout 2023-07-16T22:06:15.048Z,1689545175.048 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:06:16.164Z,1689545176.164 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T22:06:17.141Z,1689545177.141 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:06:18.632Z,1689545178.632 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T22:06:18.687Z,1689545178.687 [CBIT](CRITICAL): Communications Fault in component: ElevatorServo 2023-07-16T22:06:19.573Z,1689545179.573 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:06:57.496Z,1689545217.496 [MassServo](FAULT): Mass Shifter uart error: serial timeout 2023-07-16T22:12:45.403Z,1689545565.403 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 6.720994 min 2023-07-16T22:13:05.163Z,1689545585.163 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=28780, MT Status=1, MTMSN=1527 2023-07-16T22:13:05.891Z,1689545585.891 [CommandExec](IMPORTANT): got command load 2023-07-16T22:13:05.891Z,1689545585.891 [CommandExec](FAULT): Incomplete syntax. Try: help load 2023-07-16T22:13:14.401Z,1689545594.401 [CommandExec](IMPORTANT): got command set sci2.MissionTimeout 24 hour 2023-07-16T22:13:14.403Z,1689545594.403 [CommandExec](IMPORTANT): got command set sci2.Lat1 36.75 degree 2023-07-16T22:13:14.407Z,1689545594.407 [CommandExec](IMPORTANT): got command set sci2.Lon1 -122.022 degree 2023-07-16T22:13:14.409Z,1689545594.409 [CommandExec](IMPORTANT): got command set sci2.Speed 1 meter_per_second 2023-07-16T22:13:14.411Z,1689545594.411 [CommandExec](IMPORTANT): got command set sci2.YoYoMaxDepth 50 meter 2023-07-16T22:13:14.414Z,1689545594.414 [CommandExec](IMPORTANT): got command set sci2.MaxDepth 70 meter 2023-07-16T22:13:14.416Z,1689545594.416 [CommandExec](IMPORTANT): got command run 2023-07-16T22:13:14.416Z,1689545594.416 [CommandExec](CRITICAL): Could not run 2023-07-16T22:16:53.080Z,1689545813.080 [CBIT](FAULT): Could not open coulomb counter log file 2023-07-16T22:18:28.774Z,1689545908.774 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 12.444318 min 2023-07-16T22:21:01.804Z,1689546061.804 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T22:21:02.701Z,1689546062.701 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:21:03.833Z,1689546063.833 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T22:21:04.738Z,1689546064.738 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:21:06.240Z,1689546066.240 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T22:21:06.245Z,1689546066.245 [CBIT](CRITICAL): Communications Fault in component: RudderServo 2023-07-16T22:21:07.184Z,1689546067.184 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:21:09.937Z,1689546069.937 [DataOverHttps](FAULT): Error creating socket due to error #24: Too many open files 2023-07-16T22:21:10.001Z,1689546070.001 [CBIT](FAULT): Hardware Fault in component: DataOverHttps 2023-07-16T22:21:19.600Z,1689546079.600 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T22:21:20.493Z,1689546080.493 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:21:21.640Z,1689546081.640 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T22:21:22.517Z,1689546082.517 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:21:23.644Z,1689546083.644 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T22:21:23.649Z,1689546083.649 [CBIT](CRITICAL): Communications Fault in component: ElevatorServo 2023-07-16T22:21:24.538Z,1689546084.538 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:24:52.170Z,1689546292.170 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 18.834056 min 2023-07-16T22:26:53.415Z,1689546413.415 [CBIT](FAULT): Could not open coulomb counter log file 2023-07-16T22:30:19.033Z,1689546619.033 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 24.281502 min 2023-07-16T22:36:03.276Z,1689546963.276 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 30.018370 min 2023-07-16T22:36:07.184Z,1689546967.184 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T22:36:08.102Z,1689546968.102 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:36:09.212Z,1689546969.212 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T22:36:10.105Z,1689546970.105 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:36:11.232Z,1689546971.232 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T22:36:11.237Z,1689546971.237 [CBIT](CRITICAL): Communications Fault in component: RudderServo 2023-07-16T22:36:11.486Z,1689546971.486 [DataOverHttps](FAULT): Error creating socket due to error #24: Too many open files 2023-07-16T22:36:11.726Z,1689546971.726 [CBIT](FAULT): Hardware Fault in component: DataOverHttps 2023-07-16T22:36:12.123Z,1689546972.123 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:36:24.552Z,1689546984.552 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T22:36:25.485Z,1689546985.485 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:36:26.988Z,1689546986.988 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T22:36:27.884Z,1689546987.884 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:36:29.220Z,1689546989.220 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T22:36:29.225Z,1689546989.225 [CBIT](CRITICAL): Communications Fault in component: ElevatorServo 2023-07-16T22:36:30.088Z,1689546990.088 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:36:53.525Z,1689547013.525 [CBIT](FAULT): Could not open coulomb counter log file 2023-07-16T22:41:22.969Z,1689547282.969 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 35.347526 min 2023-07-16T22:46:41.727Z,1689547601.727 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 40.660368 min 2023-07-16T22:46:53.851Z,1689547613.851 [CBIT](FAULT): Could not open coulomb counter log file 2023-07-16T22:51:11.936Z,1689547871.936 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T22:51:12.828Z,1689547872.828 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:51:13.177Z,1689547873.177 [DataOverHttps](FAULT): Error creating socket due to error #24: Too many open files 2023-07-16T22:51:13.302Z,1689547873.302 [CBIT](FAULT): Hardware Fault in component: DataOverHttps 2023-07-16T22:51:13.964Z,1689547873.964 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T22:51:14.857Z,1689547874.857 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:51:15.988Z,1689547875.988 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T22:51:15.992Z,1689547875.992 [CBIT](CRITICAL): Communications Fault in component: RudderServo 2023-07-16T22:51:16.883Z,1689547876.883 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:51:30.128Z,1689547890.128 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T22:51:31.027Z,1689547891.027 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:51:32.132Z,1689547892.132 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T22:51:33.036Z,1689547893.036 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:51:34.158Z,1689547894.158 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T22:51:34.164Z,1689547894.164 [CBIT](CRITICAL): Communications Fault in component: ElevatorServo 2023-07-16T22:51:35.063Z,1689547895.063 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T22:52:01.329Z,1689547921.329 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 45.986381 min 2023-07-16T22:56:54.230Z,1689548214.230 [CBIT](FAULT): Could not open coulomb counter log file 2023-07-16T22:57:47.163Z,1689548267.163 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 51.750057 min 2023-07-16T23:03:05.905Z,1689548585.905 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 57.063053 min 2023-07-16T23:06:14.721Z,1689548774.721 [DataOverHttps](FAULT): Error creating socket due to error #24: Too many open files 2023-07-16T23:06:14.989Z,1689548774.989 [CBIT](FAULT): Hardware Fault in component: DataOverHttps 2023-07-16T23:06:16.912Z,1689548776.912 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T23:06:17.833Z,1689548777.833 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:06:19.336Z,1689548779.336 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T23:06:20.251Z,1689548780.251 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:06:21.784Z,1689548781.784 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T23:06:21.788Z,1689548781.788 [CBIT](CRITICAL): Communications Fault in component: RudderServo 2023-07-16T23:06:22.670Z,1689548782.670 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:06:35.100Z,1689548795.100 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T23:06:36.006Z,1689548796.006 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:06:37.528Z,1689548797.528 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T23:06:38.419Z,1689548798.419 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:06:39.564Z,1689548799.564 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T23:06:39.569Z,1689548799.569 [CBIT](CRITICAL): Communications Fault in component: ElevatorServo 2023-07-16T23:06:40.458Z,1689548800.458 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:06:54.574Z,1689548814.574 [CBIT](FAULT): Could not open coulomb counter log file 2023-07-16T23:08:38.404Z,1689548918.404 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.604569 min 2023-07-16T23:13:56.761Z,1689549236.761 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 67.910433 min 2023-07-16T23:16:54.936Z,1689549414.936 [CBIT](FAULT): Could not open coulomb counter log file 2023-07-16T23:19:19.570Z,1689549559.570 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 73.290983 min 2023-07-16T23:21:16.241Z,1689549676.241 [DataOverHttps](FAULT): Error creating socket due to error #24: Too many open files 2023-07-16T23:21:16.326Z,1689549676.326 [CBIT](FAULT): Hardware Fault in component: DataOverHttps 2023-07-16T23:21:22.688Z,1689549682.688 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T23:21:23.583Z,1689549683.583 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:21:24.724Z,1689549684.724 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T23:21:25.603Z,1689549685.603 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:21:26.744Z,1689549686.744 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T23:21:26.750Z,1689549686.750 [CBIT](CRITICAL): Communications Fault in component: RudderServo 2023-07-16T23:21:27.635Z,1689549687.635 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:21:40.460Z,1689549700.460 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T23:21:41.381Z,1689549701.381 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:21:42.877Z,1689549702.877 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T23:21:43.806Z,1689549703.806 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:21:45.308Z,1689549705.308 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T23:21:45.313Z,1689549705.313 [CBIT](CRITICAL): Communications Fault in component: ElevatorServo 2023-07-16T23:21:46.249Z,1689549706.249 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:24:35.519Z,1689549875.519 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 78.556372 min 2023-07-16T23:26:55.291Z,1689550015.291 [CBIT](FAULT): Could not open coulomb counter log file 2023-07-16T23:29:55.849Z,1689550195.849 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 83.895703 min 2023-07-16T23:35:14.621Z,1689550514.621 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 89.208122 min 2023-07-16T23:36:17.763Z,1689550577.763 [DataOverHttps](FAULT): Error creating socket due to error #24: Too many open files 2023-07-16T23:36:18.061Z,1689550578.061 [CBIT](FAULT): Hardware Fault in component: DataOverHttps 2023-07-16T23:36:27.665Z,1689550587.665 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T23:36:28.549Z,1689550588.549 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:36:29.705Z,1689550589.705 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T23:36:30.578Z,1689550590.578 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:36:31.720Z,1689550591.720 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T23:36:31.725Z,1689550591.725 [CBIT](CRITICAL): Communications Fault in component: RudderServo 2023-07-16T23:36:32.585Z,1689550592.585 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:36:46.232Z,1689550606.232 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T23:36:47.204Z,1689550607.204 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:36:48.656Z,1689550608.656 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T23:36:49.554Z,1689550609.554 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:36:50.684Z,1689550610.684 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T23:36:50.689Z,1689550610.689 [CBIT](CRITICAL): Communications Fault in component: ElevatorServo 2023-07-16T23:36:51.597Z,1689550611.597 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:36:55.618Z,1689550615.618 [CBIT](FAULT): Could not open coulomb counter log file 2023-07-16T23:37:50.158Z,1689550670.158 [CBIT](IMPORTANT): Beginning ground fault scan 2023-07-16T23:38:01.150Z,1689550681.150 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.029050 CHAN A1 (24V): 0.064797 CHAN A2 (12V): 0.023061 CHAN A3 (5V): 0.007824 CHAN B0 (3.3V): 0.006970 CHAN B1 (3.15aV): 0.006345 CHAN B2 (3.15bV): 0.006947 CHAN B3 (GND): 0.000920 OPEN: 0.007833 Full Scale: +/- 1 mA 2023-07-16T23:40:49.194Z,1689550849.194 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 94.783301 min 2023-07-16T23:46:12.329Z,1689551172.329 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 100.170117 min 2023-07-16T23:46:55.991Z,1689551215.991 [CBIT](FAULT): Could not open coulomb counter log file 2023-07-16T23:51:18.908Z,1689551478.908 [DataOverHttps](FAULT): Error creating socket due to error #24: Too many open files 2023-07-16T23:51:18.980Z,1689551478.980 [CBIT](FAULT): Hardware Fault in component: DataOverHttps 2023-07-16T23:51:32.616Z,1689551492.616 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T23:51:33.525Z,1689551493.525 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:51:34.644Z,1689551494.644 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T23:51:35.551Z,1689551495.551 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:51:36.684Z,1689551496.684 [RudderServo](FAULT): Rudder failed to initialize 2023-07-16T23:51:36.689Z,1689551496.689 [CBIT](CRITICAL): Communications Fault in component: RudderServo 2023-07-16T23:51:37.590Z,1689551497.590 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:51:44.433Z,1689551504.433 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 105.705111 min 2023-07-16T23:51:51.640Z,1689551511.640 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T23:51:52.515Z,1689551512.515 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:51:53.665Z,1689551513.665 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T23:51:54.546Z,1689551514.546 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:51:55.684Z,1689551515.684 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-16T23:51:55.689Z,1689551515.689 [CBIT](CRITICAL): Communications Fault in component: ElevatorServo 2023-07-16T23:51:56.579Z,1689551516.579 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-16T23:56:56.382Z,1689551816.382 [CBIT](FAULT): Could not open coulomb counter log file 2023-07-16T23:56:59.984Z,1689551819.984 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 110.964445 min 2023-07-17T00:02:22.562Z,1689552142.562 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 116.340503 min 2023-07-17T00:06:20.205Z,1689552380.205 [DataOverHttps](FAULT): Error creating socket due to error #24: Too many open files 2023-07-17T00:06:20.529Z,1689552380.529 [CBIT](FAULT): Hardware Fault in component: DataOverHttps 2023-07-17T00:06:37.453Z,1689552397.453 [RudderServo](FAULT): Rudder failed to initialize 2023-07-17T00:06:38.316Z,1689552398.316 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-17T00:06:39.476Z,1689552399.476 [RudderServo](FAULT): Rudder failed to initialize 2023-07-17T00:06:40.323Z,1689552400.323 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-17T00:06:41.488Z,1689552401.488 [RudderServo](FAULT): Rudder failed to initialize 2023-07-17T00:06:41.494Z,1689552401.494 [CBIT](CRITICAL): Communications Fault in component: RudderServo 2023-07-17T00:06:42.354Z,1689552402.354 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-17T00:06:56.813Z,1689552416.813 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-17T00:06:56.815Z,1689552416.815 [CBIT](FAULT): Could not open coulomb counter log file 2023-07-17T00:06:57.714Z,1689552417.714 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-17T00:06:59.209Z,1689552419.209 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-17T00:07:00.119Z,1689552420.119 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-17T00:07:01.245Z,1689552421.245 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-17T00:07:01.249Z,1689552421.249 [CBIT](CRITICAL): Communications Fault in component: ElevatorServo 2023-07-17T00:07:02.148Z,1689552422.148 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-17T00:07:46.577Z,1689552466.577 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 121.740763 min 2023-07-17T00:12:59.352Z,1689552779.352 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 126.952922 min 2023-07-17T00:16:56.827Z,1689553016.827 [CBIT](FAULT): Could not open coulomb counter log file 2023-07-17T00:18:39.475Z,1689553119.475 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 132.622225 min 2023-07-17T00:21:21.361Z,1689553281.361 [DataOverHttps](FAULT): Error creating socket due to error #24: Too many open files 2023-07-17T00:21:21.469Z,1689553281.469 [CBIT](FAULT): Hardware Fault in component: DataOverHttps 2023-07-17T00:21:42.365Z,1689553302.365 [RudderServo](FAULT): Rudder failed to initialize 2023-07-17T00:21:43.294Z,1689553303.294 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-17T00:21:44.788Z,1689553304.788 [RudderServo](FAULT): Rudder failed to initialize 2023-07-17T00:21:45.688Z,1689553305.688 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-17T00:21:46.828Z,1689553306.828 [RudderServo](FAULT): Rudder failed to initialize 2023-07-17T00:21:46.834Z,1689553306.834 [CBIT](CRITICAL): Communications Fault in component: RudderServo 2023-07-17T00:21:47.721Z,1689553307.721 [RudderServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-17T00:22:02.157Z,1689553322.157 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-17T00:22:03.061Z,1689553323.061 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-17T00:22:04.180Z,1689553324.180 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-17T00:22:05.143Z,1689553325.143 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-17T00:22:06.616Z,1689553326.616 [ElevatorServo](FAULT): Elevator failed to initialize 2023-07-17T00:22:06.622Z,1689553326.622 [CBIT](CRITICAL): Communications Fault in component: ElevatorServo 2023-07-17T00:22:07.527Z,1689553327.527 [ElevatorServo](FAULT): Initialization error opening port: cannot open serial port 2023-07-17T00:24:02.654Z,1689553442.654 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 138.008594 min