pontus Path

trajectory

20191213T012526 [CommandLine]:got command restart logs

20191213T012620 [NAL9602]:Failed to initiate SBD session. Error code: 2

20191213T012643 [NAL9602]:Failed to initiate SBD session. Error code: 2

20191213T012703 [NAL9602]:Failed to initiate SBD session. Error code: 2

20191213T014330 [CTD_Seabird]:Failed to parse device response: .98#

20191213T021240 [CTD_Seabird]:Failed to parse device response: .89#

20191213T021917 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20191213T030555 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20191213T030555 [CBIT]:Data Fault in component: NAL9602

20191213T030556 [NAL9602]:LCB fault: Software Overcurrent.

20191213T030856 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20191213T031329 [CTD_Seabird]:Failed to parse device response: 2.66,1#

20191213T055148 [CTD_Seabird]:Failed to parse device response: .97#

20191213T060315 [CBIT]:Beginning ground fault scan

20191213T060316 [BR_Ping1D]:received message NACK from device: speed of sound out of range

20191213T060700 [CTD_Seabird]:Failed to parse device response: #

20191213T060845 [ThrusterServo]:getVelocity uart error serial timeout

20191213T060845 [ThrusterServo]:Thruster uart error: serial timeout

20191213T060845 [ThrusterServo]:Communications Fault

20191213T060845 [CBIT]:Communications Fault in component: ThrusterServo

20191213T080853 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20191213T083624 [ThrusterServo]:getVelocity uart error serial timeout

20191213T083624 [ThrusterServo]:Thruster uart error: serial timeout

20191213T083624 [ThrusterServo]:Communications Fault

20191213T083624 [CBIT]:Communications Fault in component: ThrusterServo

20191213T083625 [ThrusterServo]:LCB fault: Software Overcurrent.

20191213T083625 [ThrusterServo]:Hardware Fault

20191213T083836 [MissionManager]:Started mission Default

20191213T083939 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20191213T083939 [CBIT]:Data Fault in component: NAL9602

20191213T084310 [CommandLine]:got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 8 hour;set profile_station.NeedCommsTime 45 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" 287jc 1 2.000000

20191213T084310 [CommandLine]:Scheduling command #1 of 2 with id=287jc

20191213T084310 [CommandLine]:Scheduled #38 (#1 of 2 with id='287jc'): "load Science/profile_station.xml;set profile_station.MissionTimeout 8 hour;set profile_station.NeedCommsTime 45 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" ASAP

20191213T084808 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20191213T084814 [BPC1]:Battery stick #6 (s/n: 02BA) reported OVER_TEMP_ALARM. Status code: 0x1717.

20191213T084843 [Default:CheckIn:E]:Default mission has been running for 10.103202 min

20191213T084947 [CommandLine]:got command schedule asap "set profile_station.YoYoMaxDepth 25 meter;set profile_station.Speed 0.8 meter_per_second;run " 287jc 2 2.000000

20191213T084947 [CommandLine]:Scheduling command #2 of 2 with id=287jc

20191213T084947 [CommandLine]:Scheduled #39 (#2 of 2 with id='287jc'): "set profile_station.YoYoMaxDepth 25 meter;set profile_station.Speed 0.8 meter_per_second;run " ASAP

20191213T084947 [CommandLine]:got command load ./Missions/Science/profile_station.xml

20191213T084949 [CommandLine]:Loaded ./Missions/Science/profile_station.xml

20191213T084957 [CommandLine]:got command set profile_station.MissionTimeout 8.000000 hour

20191213T084957 [CommandLine]:got command set profile_station.NeedCommsTime 45.000000 minute

20191213T084957 [CommandLine]:got command set profile_station.Lat 36.797001 degree

20191213T084957 [CommandLine]:got command set profile_station.Lon -121.847000 degree

20191213T085003 [CommandLine]:got command set profile_station.YoYoMaxDepth 25.000000 meter

20191213T085003 [CommandLine]:got command set profile_station.Speed 0.800000 meter_per_second

20191213T085003 [CommandLine]:got command run

20191213T085003 [CommandLine]:Running

20191213T085003 [MissionManager]:Started mission profile_station

20191213T085005 [profile_station:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20191213T085007 [CTD_Seabird]:Failed to parse device response: #

20191213T091607 [CTD_Seabird]:Failed to parse device response: 4.95,13.749.42#

20191213T094130 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20191213T094241 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20191213T094241 [profile_station:NeedComms:A]:caught uninitialized data element exception.

20191213T094241 [CBIT]:Data Fault in component: NAL9602

20191213T101915 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20191213T103946 [Radio_Surface]:LCB fault: Software Overcurrent.

20191213T103946 [Radio_Surface]:Hardware Fault

20191213T103946 [CBIT]:Hardware Fault in component: Radio_Surface

20191213T110026 [CTD_Seabird]:Failed to parse device response: 6.57.88#

20191213T114115 [CTD_Seabird]:Failed to parse device response: 23.6274,3706.38#

20191213T115938 [CTD_Seabird]:Failed to parse device response: 11.9615,3815.85#

20191213T120012 [CTD_Seabird]:Failed to parse device response: 8,3.99780,3838.70#

20191213T120326 [CBIT]:Beginning ground fault scan

20191213T120327 [BR_Ping1D]:received message NACK from device: speed of sound out of range

20191213T122630 [CTD_Seabird]:Failed to parse device response: 12.56,13.762.22#

20191213T132033 [RudderServo]:getPosition uart error serial timeout

20191213T132033 [RudderServo]:Rudder uart error - getPosition..serial timeout

20191213T132033 [RudderServo]:Communications Fault

20191213T132033 [CBIT]:Communications Fault in component: RudderServo

20191213T155650 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20191213T163215 [CTD_Seabird]:Failed to parse device response: 91,3960.88#

20191213T163216 [NAL9602]:LCB fault: Software Overcurrent.

20191213T165004 [MissionManager]:Started mission Default

20191213T165004 [BuoyancyServo]:Reading outside of valid range:0.000000#

20191213T165004 [BuoyancyServo]:Buoyancy engine reporting null position

20191213T165004 [BuoyancyServo]:Hardware Fault

20191213T165004 [CBIT]:Hardware Fault in component: BuoyancyServo

20191213T165918 [Default:CheckIn:E]:Default mission has been running for 9.229218 min

20191213T170511 [Default:CheckIn:E]:Default mission has been running for 15.114626 min

20191213T171444 [CommandLine]:got command configSet WetLabsUBAT.loadAtStartup 0.000000 bool

20191213T171444 [CommandLine]:configSet WetLabsUBAT.loadAtStartup without persist will have no effect.

20191213T171815 [CommandLine]:got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 8 hour;set profile_station.NeedCommsTime 30 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" 28yp1 1 2.000000

20191213T171815 [CommandLine]:Scheduling command #1 of 2 with id=28yp1

20191213T171815 [CommandLine]:Scheduled #40 (#1 of 2 with id='28yp1'): "load Science/profile_station.xml;set profile_station.MissionTimeout 8 hour;set profile_station.NeedCommsTime 30 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" ASAP

20191213T171824 [CommandLine]:got command schedule asap "set profile_station.YoYoMaxDepth 25 meter;set profile_station.Speed 0.8 meter_per_second;run " 28yp1 2 2.000000

20191213T171824 [CommandLine]:Scheduling command #2 of 2 with id=28yp1

20191213T171824 [CommandLine]:Scheduled #41 (#2 of 2 with id='28yp1'): "set profile_station.YoYoMaxDepth 25 meter;set profile_station.Speed 0.8 meter_per_second;run " ASAP

20191213T171824 [CommandLine]:got command load ./Missions/Science/profile_station.xml

20191213T171826 [CommandLine]:Loaded ./Missions/Science/profile_station.xml

20191213T171833 [CommandLine]:got command set profile_station.MissionTimeout 8.000000 hour

20191213T171833 [CommandLine]:got command set profile_station.NeedCommsTime 30.000000 minute

20191213T171833 [CommandLine]:got command set profile_station.Lat 36.797001 degree

20191213T171833 [CommandLine]:got command set profile_station.Lon -121.847000 degree

20191213T171841 [CommandLine]:got command set profile_station.YoYoMaxDepth 25.000000 meter

20191213T171841 [CommandLine]:got command set profile_station.Speed 0.800000 meter_per_second

20191213T171841 [CommandLine]:got command run

20191213T171841 [CommandLine]:Running

20191213T171841 [MissionManager]:Started mission profile_station

20191213T171842 [BuoyancyServo]:Reading outside of valid range:0.000000#

20191213T171842 [BuoyancyServo]:Buoyancy engine reporting null position

20191213T171842 [BuoyancyServo]:Hardware Fault

20191213T171842 [CBIT]:Hardware Fault in component: BuoyancyServo

20191213T171843 [profile_station:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20191213T171845 [CTD_Seabird]:Failed to parse device response: #

20191213T175520 [ThrusterServo]:Overload Error

20191213T175520 [ThrusterServo]:Hardware Fault

20191213T175520 [CBIT]:Hardware Fault in component: ThrusterServo

20191213T180337 [CBIT]:Beginning ground fault scan

20191213T180338 [BR_Ping1D]:received message NACK from device: speed of sound out of range

20191213T180535 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20191213T200132 [CTD_Seabird]:Failed to parse device response: 0,3.99083,3810.17#

20191213T202137 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20191213T203515 [CTD_Seabird]:Failed to parse device response: 21.12.15#

20191213T204549 [ElevatorServo]:getPosition uart error serial timeout

20191213T204549 [ElevatorServo]:Elevator uart error - getPosition.serial timeout

20191213T204549 [ElevatorServo]:Communications Fault

20191213T204550 [CBIT]:Communications Fault in component: ElevatorServo

20191213T213013 [BuoyancyServo]:Reading outside of valid range:0.000000#

20191213T213013 [BuoyancyServo]:Buoyancy engine reporting null position

20191213T213013 [BuoyancyServo]:Hardware Fault

20191213T213013 [CBIT]:Hardware Fault in component: BuoyancyServo

20191213T213225 [Radio_Surface]:LCB fault: Invalid Command. Current Limiter Activated.

20191213T213225 [Radio_Surface]:Hardware Fault

20191213T213225 [CBIT]:Hardware Fault in component: Radio_Surface

20191213T220053 [NAL9602]:LCB fault: LCB Watchdog Reset. Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20191213T223723 [CTD_Seabird]:Failed to parse device response: 11.21,13.918.57#

20191213T235138 [NAL9602]:LCB fault: Software Overcurrent.

20191214T003009 [CommandLine]:got command stop

20191214T003009 [MissionManager]:Started mission Default

20191214T003125 [CommandLine]:got command stop

20191214T003753 [CommandLine]:got command configSet WetLabsUBAT.loadAtStartup 1.000000 bool

20191214T003753 [CommandLine]:configSet WetLabsUBAT.loadAtStartup without persist will have no effect.

20191214T003916 [CommandLine]:got command configSet WetLabsUBAT.loadAtStartup 1.000000 bool

20191214T003916 [CommandLine]:configSet WetLabsUBAT.loadAtStartup without persist will have no effect.

20191214T004013 [CommandLine]:got command configSet Express linearApproximation WetLabsUBAT.flow_rate 50.000000 liter_per_second persist

20191214T004409 [CommandLine]:got command configSet Express linearApproximation WetLabsUBAT.flow_rate 50.000000 liter_per_second persist

20191214T005232 [CommandLine]:got command schedule asap "load Science/sci2.xml;set sci2.MissionTimeout 24 hour;set sci2.Lat1 36.6591 degree;set sci2.Lon1 -121.8934 degree;set sci2.Lat2 36.750 degree;set sci2.Lon2 -122.022 degree;set sci2.Lat3 36.9026 degree;set sci2.Lon3 -121.9636 degree" 29jqm 1 2.000000

20191214T005232 [CommandLine]:Scheduling command #1 of 2 with id=29jqm

20191214T005232 [CommandLine]:Scheduled #42 (#1 of 2 with id='29jqm'): "load Science/sci2.xml;set sci2.MissionTimeout 24 hour;set sci2.Lat1 36.6591 degree;set sci2.Lon1 -121.8934 degree;set sci2.Lat2 36.750 degree;set sci2.Lon2 -122.022 degree;set sci2.Lat3 36.9026 degree;set sci2.Lon3 -121.9636 degree" ASAP

20191214T005241 [CommandLine]:got command schedule asap "set sci2.Lat4 36.797 degree;set sci2.Lon4 -121.847 degree;set sci2.Speed 0.8 meter_per_second;set sci2.YoYoMaxDepth 100 meter;run " 29jqm 2 2.000000

20191214T005241 [CommandLine]:Scheduling command #2 of 2 with id=29jqm

20191214T005241 [CommandLine]:Scheduled #43 (#2 of 2 with id='29jqm'): "set sci2.Lat4 36.797 degree;set sci2.Lon4 -121.847 degree;set sci2.Speed 0.8 meter_per_second;set sci2.YoYoMaxDepth 100 meter;run " ASAP

20191214T005241 [CommandLine]:got command load ./Missions/Science/sci2.xml

20191214T005244 [CommandLine]:Loaded ./Missions/Science/sci2.xml

20191214T005251 [CommandLine]:got command set sci2.MissionTimeout 24.000000 hour

20191214T005251 [CommandLine]:got command set sci2.Lat1 36.659100 degree

20191214T005251 [CommandLine]:got command set sci2.Lon1 -121.893402 degree

20191214T005251 [CommandLine]:got command set sci2.Lat2 36.750000 degree

20191214T005251 [CommandLine]:got command set sci2.Lon2 -122.022003 degree

20191214T005251 [CommandLine]:got command set sci2.Lat3 36.902599 degree

20191214T005251 [CommandLine]:got command set sci2.Lon3 -121.963600 degree

20191214T005255 [CommandLine]:got command set sci2.Speed 0.800000 meter_per_second

20191214T005255 [CommandLine]:got command set sci2.YoYoMaxDepth 100.000000 meter

20191214T005255 [CommandLine]:got command run

20191214T005255 [CommandLine]:Running

20191214T005255 [MissionManager]:Started mission sci2

20191214T005257 [sci2:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20191214T005257 [sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20191214T005418 [WetLabsUBAT]:Invalid data record: got 68 tokens

20191214T005736 [WetLabsUBAT]:Invalid data record: got 70 tokens

20191214T010106 [WetLabsUBAT]:Invalid data record: got 68 tokens

20191214T021508 [sci2:NeedComms:A]:caught uninitialized data element exception.

20191214T024528 [CTD_Seabird]:Failed to parse device response: 7,3.89392,3234.48#

20191214T033535 [RudderServo]:getPosition uart error serial timeout

20191214T033535 [RudderServo]:Rudder uart error - getPosition..serial timeout

20191214T033535 [RudderServo]:Communications Fault

20191214T033535 [CBIT]:Communications Fault in component: RudderServo

20191214T033958 [sci2:NeedComms:A]:caught uninitialized data element exception.

20191214T050502 [sci2:NeedComms:A]:caught uninitialized data element exception.

20191214T052729 [BPC1]:Battery stick #9 (s/n: 01D1) reported OVER_TEMP_ALARM. Status code: 0x1717.

20191214T061850 [RudderServo]:Overload Error

20191214T061850 [RudderServo]:Hardware Fault

20191214T061850 [CBIT]:Hardware Fault in component: RudderServo

20191214T061857 [RudderServo]:Overload Error

20191214T061857 [RudderServo]:Hardware Fault

20191214T061857 [CBIT]:Hardware Fault in component: RudderServo

20191214T061858 [sci2:NeedComms:B.GoToSurface]:Pitch down timeout. Pitch: -4.29

20191214T062322 [RudderServo]:Invalid EZ Servo response:"6#"

20191214T062322 [RudderServo]:Communications Fault

20191214T062322 [RudderServo]:Rudder reporting null position

20191214T062322 [CBIT]:Communications Fault in component: RudderServo

20191214T062522 [CommandLine]:got command stop

20191214T063422 [CommandLine]:got command schedule asap "load Science/sci2.xml;set sci2.MissionTimeout 24 hour;set sci2.Lat1 36.6591 degree;set sci2.Lon1 -121.8934 degree;set sci2.Lat2 36.750 degree;set sci2.Lon2 -122.022 degree;set sci2.Lat3 36.8662 degree" 29zkg 1 2.000000

20191214T063422 [CommandLine]:Scheduling command #1 of 2 with id=29zkg

20191214T063422 [CommandLine]:Scheduled #44 (#1 of 2 with id='29zkg'): "load Science/sci2.xml;set sci2.MissionTimeout 24 hour;set sci2.Lat1 36.6591 degree;set sci2.Lon1 -121.8934 degree;set sci2.Lat2 36.750 degree;set sci2.Lon2 -122.022 degree;set sci2.Lat3 36.8662 degree" ASAP

20191214T063431 [CommandLine]:got command schedule asap "set sci2.Lon3 -121.97711 degree;set sci2.Speed 0.8 meter_per_second;set sci2.YoYoMaxDepth 50 meter;run " 29zkg 2 2.000000

20191214T063431 [CommandLine]:Scheduling command #2 of 2 with id=29zkg

20191214T063431 [CommandLine]:Scheduled #45 (#2 of 2 with id='29zkg'): "set sci2.Lon3 -121.97711 degree;set sci2.Speed 0.8 meter_per_second;set sci2.YoYoMaxDepth 50 meter;run " ASAP

20191214T063431 [CommandLine]:got command load ./Missions/Science/sci2.xml

20191214T063434 [CommandLine]:Loaded ./Missions/Science/sci2.xml

20191214T063440 [CommandLine]:got command set sci2.MissionTimeout 24.000000 hour

20191214T063444 [CommandLine]:got command set sci2.Speed 0.800000 meter_per_second

20191214T063444 [CommandLine]:got command set sci2.YoYoMaxDepth 50.000000 meter

20191214T063444 [MissionManager]:Started mission sci2

20191214T063446 [sci2:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20191214T063446 [sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20191214T063714 [Radio_Surface]:LCB fault: Software Overcurrent.

20191214T063714 [Radio_Surface]:Hardware Fault

20191214T063714 [CBIT]:Hardware Fault in component: Radio_Surface

20191214T065830 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20191214T073143 [RudderServo]:Invalid EZ Servo response:"#"

20191214T073143 [RudderServo]:Rudder reporting null position

20191214T074100 [CommandLine]:got command schedule clear

20191214T074100 [CommandLine]:#Cleared scheduled commands:0

20191214T084617 [CommandLine]:got command schedule resume

20191214T084617 [CommandLine]:Scheduling is resumed

20191214T084719 [CommandLine]:got command schedule "load Science/sci2.xml;set sci2.MissionTimeout 24 hour;set sci2.Lat1 36.9026 degree;set sci2.Lon1 -121.9636 degree;set sci2.Lat2 36.797 degree;set sci2.Lon2 -121.847 degree;set sci2.Speed 0.8 meter_per_second" 2a13h 1 2.000000

20191214T084719 [CommandLine]:Scheduling command #1 of 2 with id=2a13h

20191214T084719 [CommandLine]:Scheduled #46 (#1 of 2 with id='2a13h'): "load Science/sci2.xml;set sci2.MissionTimeout 24 hour;set sci2.Lat1 36.9026 degree;set sci2.Lon1 -121.9636 degree;set sci2.Lat2 36.797 degree;set sci2.Lon2 -121.847 degree;set sci2.Speed 0.8 meter_per_second"

20191214T084753 [CTD_Seabird]:Failed to parse device response: 07,3957.12#

20191214T093342 [RudderServo]:Invalid EZ Servo response:"#"

20191214T093342 [RudderServo]:Rudder reporting null position

20191214T093342 [CTD_Seabird]:Failed to parse device response: 48.67.44#

20191214T095032 [RudderServo]:getPosition uart error serial timeout

20191214T095032 [RudderServo]:Rudder uart error - getPosition..serial timeout

20191214T095154 [CommandLine]:got command schedule "set sci2.YoYoMaxDepth 25 meter;run " 2a13h 2 2.000000

20191214T095154 [CommandLine]:Scheduling command #2 of 2 with id=2a13h

20191214T095154 [CommandLine]:Scheduled #47 (#2 of 2 with id='2a13h'): "set sci2.YoYoMaxDepth 25 meter;run "

20191214T105833 [CTD_Seabird]:Salinity reading out of range: 21.453154 psu

20191214T110912 [ThrusterServo]:Invalid EZ Servo response:"#"

20191214T110912 [ThrusterServo]:Communications Fault

20191214T110912 [CBIT]:Communications Fault in component: ThrusterServo

20191214T123242 [BPC1]:BPC1A: No match for serial number FFFF in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20191214T131411 [ElevatorServo]:Invalid EZ Servo response:"\377\r"

20191214T131411 [ElevatorServo]:Communications Fault

20191214T131411 [ElevatorServo]:Elevator reporting null position

20191214T131411 [CBIT]:Communications Fault in component: ElevatorServo

20191214T132422 [CTD_Seabird]:Failed to parse device response: 02,3796.54#

20191214T142112 [BuoyancyServo]:Invalid EZ Servo response:"#"

20191214T142112 [BuoyancyServo]:Communications Fault

20191214T151905 [CTD_Seabird]:Failed to parse device response: 17#

20191214T152608 [BuoyancyServo]:getPosition uart error serial timeout

20191214T152608 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20191214T152608 [BuoyancyServo]:Communications Fault

20191214T152609 [CBIT]:Communications Fault in component: BuoyancyServo

20191214T155047 [ThrusterServo]:getVelocity uart error serial timeout

20191214T155047 [ThrusterServo]:Thruster uart error: serial timeout

20191214T162948 [WetLabsUBAT]:Stopping now due to load at startup. No immediate restart required.

20191214T170036 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20191214T194956 [CTD_Seabird]:Salinity reading out of range: 23.514042 psu

20191214T195036 [CTD_Seabird]:Salinity reading out of range: 22.526226 psu

20191214T200915 [CTD_Seabird]:Failed to parse device response: 29.15,13.7427,7#

20191214T202539 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20191214T202848 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20191214T210310 [CommandLine]:got command schedule list

20191214T210310 [CommandLine]:Scheduled #46 (#1 of 2 with id='2a13h'): "load Science/sci2.xml;set sci2.MissionTimeout 24 hour;set sci2.Lat1 36.9026 degree;set sci2.Lon1 -121.9636 degree;set sci2.Lat2 36.797 degree;set sci2.Lon2 -121.847 degree;set sci2.Speed 0.8 meter_per_second"

20191214T210310 [CommandLine]:Scheduled #47 (#2 of 2 with id='2a13h'): "set sci2.YoYoMaxDepth 25 meter;run "

20191214T213115 [CTD_Seabird]:Failed to parse device response: 1.68,13.956935#

20191214T230533 [CommandLine]:got command load ./Missions/Science/sci2.xml

20191214T230535 [CommandLine]:Loaded ./Missions/Science/sci2.xml

20191214T230541 [CommandLine]:got command set sci2.MissionTimeout 24.000000 hour

20191214T230541 [CommandLine]:got command set sci2.Speed 0.800000 meter_per_second

20191214T230543 [CommandLine]:got command set sci2.YoYoMaxDepth 25.000000 meter

20191214T230543 [MissionManager]:Started mission sci2

20191214T230545 [sci2:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20191214T230545 [sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20191215T012924 [CommandLine]:Scheduling is paused

20191215T013610 [CommandLine]:got command gfscan

20191215T013658 [CommandLine]:got command gfscan

20191215T015146 [CTD_Seabird]:Failed to parse device response: .97810,3813.49#

20191215T015743 [CTD_Seabird]:Failed to parse device response: 9.44,13.7804,#

20191215T023454 [ThrusterServo]:Invalid EZ Servo response:"#"

20191215T050232 [CTD_Seabird]:Failed to parse device response: 53#

20191215T061010 [CommandLine]:got command schedule clear

20191215T061010 [CommandLine]:#Cleared scheduled commands:0

20191215T061010 [CommandLine]:got command schedule resume

20191215T061010 [CommandLine]:Scheduling is resumed

20191215T061030 [CommandLine]:got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 24 hour;set profile_station.NeedCommsTime 45 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" 2bsah 1 2.000000

20191215T061030 [CommandLine]:Scheduling command #1 of 2 with id=2bsah

20191215T061030 [CommandLine]:Scheduled #48 (#1 of 2 with id='2bsah'): "load Science/profile_station.xml;set profile_station.MissionTimeout 24 hour;set profile_station.NeedCommsTime 45 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" ASAP

20191215T061053 [CommandLine]:got command schedule asap "set profile_station.YoYoMaxDepth 25 meter;set profile_station.Speed 0.8 meter_per_second;set profile_station.MaxDepth 35 meter;run " 2bsah 2 2.000000

20191215T061053 [CommandLine]:Scheduling command #2 of 2 with id=2bsah

20191215T061053 [CommandLine]:Scheduled #49 (#2 of 2 with id='2bsah'): "set profile_station.YoYoMaxDepth 25 meter;set profile_station.Speed 0.8 meter_per_second;set profile_station.MaxDepth 35 meter;run " ASAP

20191215T061053 [CommandLine]:got command load ./Missions/Science/profile_station.xml

20191215T061055 [CommandLine]:Loaded ./Missions/Science/profile_station.xml

20191215T061104 [CommandLine]:got command set profile_station.MissionTimeout 24.000000 hour

20191215T061104 [CommandLine]:got command set profile_station.NeedCommsTime 45.000000 minute

20191215T061104 [CommandLine]:got command set profile_station.Lat 36.797001 degree

20191215T061104 [CommandLine]:got command set profile_station.Lon -121.847000 degree

20191215T061110 [CommandLine]:got command set profile_station.YoYoMaxDepth 25.000000 meter

20191215T061110 [CommandLine]:got command set profile_station.Speed 0.800000 meter_per_second

20191215T061110 [CommandLine]:got command set profile_station.MaxDepth 35.000000 meter

20191215T061111 [MissionManager]:Started mission profile_station

20191215T061112 [profile_station:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20191215T063209 [BPC1]:BPC1A: No match for serial number FFFF in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20191215T070657 [profile_station:NeedComms:C:A_Timeout:A]:first GPS update timeout

20191215T093855 [profile_station:NeedComms:A]:caught uninitialized data element exception.

20191215T093954 [CommandLine]:got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 24 hour;set profile_station.NeedCommsTime 30 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" 2c1nh 1 2.000000

20191215T093954 [CommandLine]:Scheduling command #1 of 2 with id=2c1nh

20191215T093954 [CommandLine]:Scheduled #50 (#1 of 2 with id='2c1nh'): "load Science/profile_station.xml;set profile_station.MissionTimeout 24 hour;set profile_station.NeedCommsTime 30 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" ASAP

20191215T094556 [profile_station:NeedComms:C:A_Timeout:A]:first GPS update timeout

20191215T094652 [CommandLine]:got command schedule asap "set profile_station.YoYoMaxDepth 25 meter;set profile_station.Speed 0.8 meter_per_second;set profile_station.MaxDepth 35 meter;run " 2c1nh 2 2.000000

20191215T094652 [CommandLine]:Scheduling command #2 of 2 with id=2c1nh

20191215T094652 [CommandLine]:Scheduled #51 (#2 of 2 with id='2c1nh'): "set profile_station.YoYoMaxDepth 25 meter;set profile_station.Speed 0.8 meter_per_second;set profile_station.MaxDepth 35 meter;run " ASAP

20191215T094653 [WetLabsBB2FL]:LCB fault: Software Overcurrent.

20191215T094653 [WetLabsBB2FL]:Hardware Fault

20191215T094653 [CBIT]:Hardware Fault in component: WetLabsBB2FL

20191215T094713 [CommandLine]:got command set profile_station.MaxDepth 35.000000 meter

20191215T094937 [NAL9602]:GPS failed to acquire within timeout.

20191215T095415 [profile_station:NeedComms:C:A_Timeout:A]:first GPS update timeout

20191215T100021 [NAL9602]:GPS failed to acquire within timeout.

20191215T100129 [profile_station:NeedComms:E:A_Timeout:A]:second GPS update timeout

20191215T101329 [NAL9602]:GPS failed to acquire within timeout.

20191215T102429 [profile_station:NeedComms:E:A_Timeout:A]:second GPS update timeout

20191215T102430 [profile_station:NeedComms:A]:caught uninitialized data element exception.

20191215T104423 [ThrusterServo]:Invalid EZ Servo response:"#"

20191215T105530 [RudderServo]:Invalid EZ Servo response:"#"

20191215T115926 [CTD_Seabird]:Failed to parse device response: 24.61,9#

20191215T133327 [BuoyancyServo]:getPosition uart error serial timeout

20191215T133327 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20191215T133327 [BuoyancyServo]:Communications Fault

20191215T133327 [CBIT]:Communications Fault in component: BuoyancyServo

20191215T142006 [CTD_Seabird]:Failed to parse device response: 17609.60#

20191215T152603 [WetLabsUBAT]:Stopping now due to load at startup. No immediate restart required.

20191215T152604 [WetLabsUBAT]:LCB fault: Software Overcurrent.

20191215T152604 [WetLabsUBAT]:Hardware Fault

20191215T152604 [CBIT]:Hardware Fault in component: WetLabsUBAT

20191215T152623 [WetLabsUBAT]:Stopping now due to load at startup. No immediate restart required.

20191215T154705 [CTD_Seabird]:Failed to parse device response: 24.98,1#

20191215T193907 [NAL9602]:LCB fault: LCB Watchdog Reset. Invalid Command. Hardware Overcurrent Shutdown. Software Overcurrent.

20191215T193910 [BuoyancyServo]:getPosition uart error serial timeout

20191215T193910 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20191215T193910 [CBIT]:Communications Fault in component: BuoyancyServo

20191215T193912 [BuoyancyServo]:LCB fault: Current Limiter Activated.

20191215T194344 [Radio_Surface]:LCB fault: Software Overcurrent.

20191215T220137 [ThrusterServo]:Thruster halt for initialization uart error serial timeout

20191215T220137 [ThrusterServo]:Thruster failed to initialize

20191215T231503 [NAL9602]:Queried for signal strength and failed to receive proper response.