pontus Path

trajectory

20191010T034433 [CommandLine]:got command configSet list

20191010T034433 [CommandLine]:Listing configuration overrides from Data/persisted.cfg

20191010T034433 [CommandLine]:CBIT.abortDepth=300 meter;#

20191010T034433 [CommandLine]:CBIT.gf24Offset=143 microampere;#

20191010T034433 [CommandLine]:CBIT.stopDepth=290 meter;#

20191010T034433 [CommandLine]:DAT.loadAtStartup=0 bool;#

20191010T034433 [CommandLine]:DVL_micro.loadAtStartup=0 bool;#

20191010T034433 [CommandLine]:Express linearApproximation BackSeatDriver.biolum_dinoflagellate_proxy 1000000000.000000 none;#

20191010T034433 [CommandLine]:Express none BackSeatDriver.biolum_jelly_proxy;#

20191010T034433 [CommandLine]:Express none RDI_Pathfinder.height_above_sea_floor;#

20191010T034433 [CommandLine]:Express linearApproximation Tracking.range_to_contact 10.000000 meter;#

20191010T034433 [CommandLine]:Express none WetLabsUBAT.biolum_potential;#

20191010T034433 [CommandLine]:Express none WetLabsUBAT.flow_rate;#

20191010T034433 [CommandLine]:Express linearApproximation height_above_sea_floor 10.000000 meter;#

20191010T034433 [CommandLine]:Normal linearApproximation BackSeatDriver.biolum_jelly_proxy 1000000.000000 none;#

20191010T034433 [CommandLine]:Normal linearApproximation WetLabsUBAT.biolum_potential 1000000.000000 none;#

20191010T034433 [CommandLine]:RDI_Pathfinder.loadAtStartup=1 bool;#

20191010T034433 [CommandLine]:VerticalControl.buoyancyNeutral=191 cubic_centimeter;#

20191010T034433 [CommandLine]:VerticalControl.massDefault=5.5 millimeter;#

20191010T034654 [NAL9602]:Failed to initiate SBD session. Error code: 2

20191010T034736 [NAL9602]:Failed to initiate SBD session. Error code: 2

20191010T034756 [NAL9602]:Failed to initiate SBD session. Error code: 2

20191010T035426 [Default:CheckIn:E]:Default mission has been running for 13.419974 min

20191010T035430 [NAL9602]:parseGSV uart error: serial buffer full

20191010T035950 [CommandLine]:got command load ./Missions/Science/profile_station.xml

20191010T035951 [CommandLine]:Loaded ./Missions/Science/profile_station.xml

20191010T035956 [CommandLine]:got command set profile_station.MissionTimeout 12.000000 hour

20191010T035956 [CommandLine]:got command set profile_station.Lat 36.797001 degree

20191010T035956 [CommandLine]:got command set profile_station.Lon -121.847000 degree

20191010T035956 [CommandLine]:got command run

20191010T035956 [CommandLine]:Running

20191010T035956 [MissionManager]:Started mission profile_station

20191010T035957 [BuoyancyServo]:getPosition uart error serial timeout

20191010T035957 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20191010T035957 [BuoyancyServo]:Communications Fault

20191010T035957 [CBIT]:Communications Fault in component: BuoyancyServo

20191010T035957 [profile_station:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20191010T035959 [CTD_Seabird]:Failed to parse device response: #

20191010T040002 [NAL9602]:parseGSV uart error: serial buffer full

20191010T040017 [BackSeatDriver]:photon: running biolum proxies application.

20191010T040139 [WetLabsUBAT]:Invalid data record: got 69 tokens

20191010T040305 [NAL9602]:parseGSV uart error: serial buffer full

20191010T040415 [WetLabsUBAT]:Invalid data record: got 70 tokens

20191010T040941 [WetLabsUBAT]:Invalid data record: got 56 tokens

20191010T041719 [CTD_Seabird]:Failed to parse device response: 175813.83#

20191010T042655 [ThrusterServo]:Invalid EZ Servo response:"#"

20191010T042655 [ThrusterServo]:Communications Fault

20191010T042655 [CBIT]:Communications Fault in component: ThrusterServo

20191010T045433 [CTD_Seabird]:Pressure reading out of range: 63608.000000 decibar

20191010T051400 [CTD_Seabird]:Salinity reading out of range: 27.281292 psu

20191010T054802 [ThrusterServo]:Unknown EZ Servo Error: 10

20191010T054802 [ThrusterServo]:Hardware Fault

20191010T054802 [CBIT]:Hardware Fault in component: ThrusterServo

20191010T054803 [CTD_Seabird]:Failed to parse device response: 8,3.67137,1975.80#

20191010T064207 [BuoyancyServo]:Reading outside of valid range:0.000000#

20191010T064207 [BuoyancyServo]:Buoyancy engine reporting null position

20191010T064207 [BuoyancyServo]:Hardware Fault

20191010T064208 [CBIT]:Hardware Fault in component: BuoyancyServo

20191010T064833 [CTD_Seabird]:Failed to parse device response: 59,4196.78#

20191010T064912 [NAL9602]:Verify xmit timeout failure.

20191010T064912 [CBIT]:Data Fault in component: NAL9602

20191010T070038 [BuoyancyServo]:Reading outside of valid range:0.000000#

20191010T070038 [BuoyancyServo]:Buoyancy engine reporting null position

20191010T070038 [BuoyancyServo]:Hardware Fault

20191010T070038 [CBIT]:Hardware Fault in component: BuoyancyServo

20191010T070714 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20191010T071556 [CTD_Seabird]:Failed to parse device response: 156939.79#

20191010T074034 [ThrusterServo]:Unknown EZ Servo Error: 10

20191010T074034 [ThrusterServo]:Hardware Fault

20191010T074034 [CBIT]:Hardware Fault in component: ThrusterServo

20191010T082925 [CTD_Seabird]:Failed to parse device response: 1,3.63005,1728.67#

20191010T084908 [CTD_Seabird]:Failed to parse device response: .89#

20191010T093817 [CBIT]:Beginning ground fault scan

20191010T103246 [ElevatorServo]:Invalid EZ Servo response:"#"

20191010T103246 [ElevatorServo]:Communications Fault

20191010T103246 [ElevatorServo]:Elevator reporting null position

20191010T103246 [CBIT]:Communications Fault in component: ElevatorServo

20191010T104504 [CTD_Seabird]:Failed to parse device response: 7,4.14631,4616.60#

20191010T110254 [CTD_Seabird]:Failed to parse device response: 0.1401,4685.30#

20191010T113050 [CTD_Seabird]:Failed to parse device response: 50,2404.69#

20191010T123700 [RudderServo]:getPosition uart error serial timeout

20191010T123700 [RudderServo]:Rudder uart error - getPosition..serial timeout

20191010T123700 [RudderServo]:Communications Fault

20191010T123700 [CBIT]:Communications Fault in component: RudderServo

20191010T123758 [CTD_Seabird]:Failed to parse device response: 73.2862,2290.40#

20191010T123806 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20191010T124354 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20191010T130618 [ThrusterServo]:getVelocity uart error serial timeout

20191010T130618 [ThrusterServo]:Thruster uart error: serial timeout

20191010T130618 [ThrusterServo]:Communications Fault

20191010T130618 [CBIT]:Communications Fault in component: ThrusterServo

20191010T131450 [CTD_Seabird]:Failed to parse device response: 113.44,1#

20191010T132626 [ThrusterServo]:getVelocity uart error serial timeout

20191010T132626 [ThrusterServo]:Thruster uart error: serial timeout

20191010T132626 [ThrusterServo]:Communications Fault

20191010T132626 [CBIT]:Communications Fault in component: ThrusterServo

20191010T134655 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20191010T134656 [CBIT]:Data Fault in component: NAL9602

20191010T142327 [ThrusterServo]:getVelocity uart error serial timeout

20191010T142327 [ThrusterServo]:Thruster uart error: serial timeout

20191010T150938 [CommandLine]:got command load ./Missions/Transport/transit_3km.xml

20191010T150939 [CommandLine]:Loaded ./Missions/Transport/transit_3km.xml

20191010T150940 [WetLabsUBAT]:LCB fault: Software Overcurrent.

20191010T150940 [WetLabsUBAT]:Hardware Fault

20191010T150944 [CommandLine]:got command set transit_3km:transit.MissionTimeout 120.000000 minute

20191010T150944 [CommandLine]:got command set transit_3km:transit.NeedCommsTime 20.000000 minute

20191010T150944 [CommandLine]:got command run

20191010T150944 [CommandLine]:Running

20191010T150944 [MissionManager]:Started mission transit_3km

20191010T150945 [CBIT]:Hardware Fault in component: WetLabsUBAT

20191010T150945 [BuoyancyServo]:getPosition uart error serial timeout

20191010T150945 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20191010T150945 [BuoyancyServo]:Communications Fault

20191010T150945 [CBIT]:Communications Fault in component: BuoyancyServo

20191010T153432 [NAL9602]:Inadequate Iridium signal strength reported: 0

20191010T153828 [CBIT]:Beginning ground fault scan

20191010T160031 [NAL9602]:Timeout waiting for SBDI response.

20191010T160032 [CBIT]:Data Fault in component: NAL9602

20191010T160117 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20191010T160401 [Radio_Surface]:LCB fault: Software Overcurrent.

20191010T160401 [Radio_Surface]:Hardware Fault

20191010T160402 [CBIT]:Hardware Fault in component: Radio_Surface

20191010T161059 [transit_3km:transit:Transit:Wpt1.Waypoint]:Reached Waypoint: 36.806966,-121.824326

20191010T161349 [CommandLine]:got command load ./Missions/Science/profile_station.xml

20191010T161350 [CommandLine]:Loaded ./Missions/Science/profile_station.xml

20191010T161355 [CommandLine]:got command set profile_station.MissionTimeout 6.000000 hour

20191010T161355 [CommandLine]:got command set profile_station.NeedCommsTime 20.000000 minute

20191010T161355 [CommandLine]:got command set profile_station.YoYoMaxDepth 20.000000 meter

20191010T161355 [CommandLine]:got command run

20191010T161355 [CommandLine]:Running

20191010T161355 [MissionManager]:Started mission profile_station

20191010T161356 [BuoyancyServo]:getPosition uart error serial timeout

20191010T161356 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20191010T161356 [BuoyancyServo]:Communications Fault

20191010T161356 [CBIT]:Communications Fault in component: BuoyancyServo

20191010T161356 [profile_station:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20191010T161359 [CTD_Seabird]:Failed to parse device response: #

20191010T161415 [BackSeatDriver]:photon: running biolum proxies application.

20191010T163854 [CommandLine]:got command stop

20191010T163854 [CommandLine]:Scheduling is paused

20191010T163854 [MissionManager]:Started mission Default

20191010T163921 [CommandLine]:got command stop

20191010T164536 [Default:CheckIn:E]:Default mission has been running for 6.690515 min

20191010T164721 [CommandLine]:got command stop

20191010T165110 [Default:CheckIn:E]:Default mission has been running for 12.246772 min

20191010T173010 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20191010T173113 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.