pontus Path

trajectory

20191007T135510 [CommandLine]:got command restart logs

20191007T135523 [CommandLine]:got command load ./Missions/Science/profile_station.xml

20191007T135523 [WetLabsBB2FL]:LCB fault: Software Overcurrent.

20191007T135523 [WetLabsBB2FL]:Hardware Fault

20191007T135524 [CommandLine]:Loaded ./Missions/Science/profile_station.xml

20191007T135530 [CommandLine]:got command set profile_station.MissionTimeout 12.000000 hour

20191007T135530 [CommandLine]:got command set profile_station.Lat 36.712109 degree

20191007T135530 [CommandLine]:got command set profile_station.Lon -122.187027 degree

20191007T135530 [CommandLine]:got command set profile_station.Radius 2000.000000 meter

20191007T135530 [CommandLine]:got command run

20191007T135530 [CommandLine]:Running

20191007T135530 [MissionManager]:Started mission profile_station

20191007T135530 [CBIT]:Hardware Fault in component: WetLabsBB2FL

20191007T135531 [BuoyancyServo]:getPosition uart error serial timeout

20191007T135531 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20191007T135531 [BuoyancyServo]:Communications Fault

20191007T135531 [CBIT]:Communications Fault in component: BuoyancyServo

20191007T135531 [profile_station:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20191007T135534 [CTD_Seabird]:Failed to parse device response: #

20191007T135600 [BackSeatDriver]:photon: running biolum proxies application.

20191007T135924 [WetLabsUBAT]:Invalid data record: got 70 tokens

20191007T140005 [WetLabsUBAT]:Invalid data record: got 69 tokens

20191007T140222 [WetLabsUBAT]:Invalid data record: got 68 tokens

20191007T140232 [profile_station:NeedComms:C:A_Timeout:A]:first GPS update timeout

20191007T140256 [NAL9602]:Failed to initiate SBD session. Error code: 2

20191007T140318 [CTD_Seabird]:Failed to parse device response: 3,4.09092,4095.64#

20191007T140322 [NAL9602]:Failed to initiate SBD session. Error code: 2

20191007T140437 [NAL9602]:Failed to initiate SBD session. Error code: 2

20191007T150501 [CBIT]:Beginning ground fault scan

20191007T151453 [ThrusterServo]:Invalid EZ Servo response:"#"

20191007T151453 [ThrusterServo]:Communications Fault

20191007T151453 [CBIT]:Communications Fault in component: ThrusterServo

20191007T153712 [CommandLine]:got command configSet WetLabsUBAT.loadAtStartup 0.000000 bool

20191007T153712 [CommandLine]:configSet WetLabsUBAT.loadAtStartup without persist will have no effect.

20191007T153712 [WetLabsUBAT]:Stopping now due to load at startup. No immediate restart required.

20191007T153757 [CommandLine]:got command load ./Missions/Science/profile_station.xml

20191007T153758 [CommandLine]:Loaded ./Missions/Science/profile_station.xml

20191007T153804 [CommandLine]:got command set profile_station.MissionTimeout 12.000000 hour

20191007T153804 [CommandLine]:got command set profile_station.Lat 36.712109 degree

20191007T153804 [CommandLine]:got command set profile_station.Lon -122.187027 degree

20191007T153804 [CommandLine]:got command set profile_station.Radius 2000.000000 meter

20191007T153804 [CommandLine]:got command run

20191007T153804 [MissionManager]:Started mission profile_station

20191007T153804 [ElevatorOffsetCalculator]:Completed estimation for commanded vars: speed 1.00 m/s, pitch 20.00 deg, mass-position 5.50 mm. Average elevator angle=-2.971239 +/- 0.090245 deg (conf. level 99.90%, sigma: 0.318758 deg).

20191007T153804 [ElevatorOffsetCalculator]:Completed estimation for commanded vars: speed 1.00 m/s, pitch -20.00 deg, mass-position 5.50 mm. Average elevator angle=0.682331 +/- 0.093841 deg (conf. level 99.90%, sigma: 0.372354 deg).

20191007T153804 [CommandLine]:Running

20191007T153805 [BuoyancyServo]:getPosition uart error serial timeout

20191007T153805 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20191007T153805 [BuoyancyServo]:Communications Fault

20191007T153805 [CBIT]:Communications Fault in component: BuoyancyServo

20191007T153805 [profile_station:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20191007T153807 [CTD_Seabird]:Failed to parse device response: #

20191007T163942 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20191007T165156 [ThrusterServo]:getVelocity uart error serial timeout

20191007T165156 [ThrusterServo]:Thruster uart error: serial timeout

20191007T165156 [ThrusterServo]:Communications Fault

20191007T165156 [CBIT]:Communications Fault in component: ThrusterServo

20191007T165204 [ThrusterServo]:getVelocity uart error serial timeout

20191007T165204 [ThrusterServo]:Thruster uart error: serial timeout

20191007T165204 [ThrusterServo]:Communications Fault

20191007T165204 [CBIT]:Communications Fault in component: ThrusterServo

20191007T192525 [NAL9602]:parseGSV uart error: serial buffer full

20191007T192654 [NAL9602]:parseGSV uart error: serial buffer full

20191007T200132 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20191007T204221 [ElevatorOffsetCalculator]:Completed estimation for commanded vars: speed 1.00 m/s, pitch -20.00 deg, mass-position 5.50 mm. Average elevator angle=0.440822 +/- 0.090782 deg (conf. level 99.90%, sigma: 0.392204 deg).

20191007T210512 [CBIT]:Beginning ground fault scan

20191007T215657 [CommandLine]:got command stop

20191007T215657 [CommandLine]:Scheduling is paused

20191007T215657 [MissionManager]:Started mission Default

20191007T215658 [WetLabsBB2FL]:LCB fault: Software Overcurrent.

20191007T215658 [WetLabsBB2FL]:Hardware Fault

20191007T215658 [CBIT]:Hardware Fault in component: WetLabsBB2FL

20191007T215715 [NAL9602]:parseGSV uart error: serial buffer full

20191007T220824 [Default:CheckIn:E]:Default mission has been running for 11.437707 min

20191007T221403 [Default:CheckIn:E]:Default mission has been running for 17.085065 min

20191007T221544 [CommandLine]:got command restart application