pontus Path

trajectory

20230811T040000 [CommandExec]:got command ubat on

20230811T040000 [CommandExec]:Enabling UBAT.

20230811T040000 [CommandExec]:got command restart logs

20230811T040010 [WetLabsUBAT]:UBAT flow rate is below the specified threshold of 0.05 l/s.

20230811T040047 [NAL9602]:Failed to initiate SBD session. Error code: 2

20230811T040323 [NAL9602]:Failed to initiate SBD session. Error code: 2

20230811T040357 [WetLabsUBAT]:Failed to parse incomplete device message.

20230811T041116 [WetLabsUBAT]:Failed to parse incomplete device message.

20230811T041152 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20230811T041157 [profile_station:NeedComms:D:A_Timeout:A]:Comms timed out after 30.000000 min minutes

20230811T041713 [WetLabsUBAT]:Failed to parse incomplete device message.

20230811T053715 [NAL9602]:Failed to initiate SBD session. Error code: 2

20230811T055620 [ElevatorOffsetCalculator]:Completed estimation for commanded vars: speed 1.00 m/s, pitch -20.00 deg, mass-position 5.36 mm. Average elevator angle=2.187687 +/- 0.097054 deg (conf. level 99.90%, sigma: 0.322412 deg).

20230811T060513 [CTD_Seabird]:Failed to parse device response: 5,3.67962,1912.57#

20230811T063823 [CBIT]:Beginning ground fault scan

20230811T064001 [CTD_Seabird]:Failed to parse device response: 09,1613.25#

20230811T065531 [CTD_Seabird]:Failed to parse device response: .06#

20230811T065931 [CTD_Seabird]:Failed to parse device response: 99.78,16#

20230811T071600 [CTD_Seabird]:Failed to parse device response: 60337.52#

20230811T072051 [BuoyancyServo]:getPosition uart error serial timeout

20230811T072051 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20230811T072051 [BuoyancyServo]:Communications Fault

20230811T072051 [CBIT]:Communications Fault in component: BuoyancyServo

20230811T072505 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20230811T072537 [NAL9602]:Queried for signal strength and failed to receive proper response.

20230811T072919 [CommandExec]:got command schedule 20230811T124500 "load Science/sci2.tl;set sci2.MissionTimeout 16 h;set sci2.Repeat 2 count;set sci2.Lat1 36.75 degree;set sci2.Lon1 -122.4 degree;set sci2.Lat2 36.75 degree;set sci2.Lon2 -122.3 degree;set sci2.Lat3 36.74 degree" 44o23 1 2.000000

20230811T072919 [CommandExec]:Scheduling command #1 of 2 with id=44o23

20230811T072919 [CommandExec]:Scheduled #4 (#1 of 2 with id='44o23'): "load Science/sci2.tl;set sci2.MissionTimeout 16 h;set sci2.Repeat 2 count;set sci2.Lat1 36.75 degree;set sci2.Lon1 -122.4 degree;set sci2.Lat2 36.75 degree;set sci2.Lon2 -122.3 degree;set sci2.Lat3 36.74 degree", AT TIME: 2023-08-11T12:45:00Z

20230811T073036 [CommandExec]:got command schedule 20230811T124500 "set sci2.Lon3 -122.4 degree;set sci2.Lat4 36.74 degree;set sci2.Lon4 -122.3 degree;set sci2.YoYoMaxDepth 50 m;set sci2.MaxDepth 60 m;run" 44o23 2 2.000000

20230811T073036 [CommandExec]:Scheduling command #2 of 2 with id=44o23

20230811T073036 [CommandExec]:Scheduled #5 (#2 of 2 with id='44o23'): "set sci2.Lon3 -122.4 degree;set sci2.Lat4 36.74 degree;set sci2.Lon4 -122.3 degree;set sci2.YoYoMaxDepth 50 m;set sci2.MaxDepth 60 m;run", AT TIME: 2023-08-11T12:45:00Z

20230811T073235 [CommandExec]:got command schedule 20230811T143000 "ubat off; restart logs"

20230811T073235 [CommandExec]:Scheduled #6: "ubat off; restart logs", AT TIME: 2023-08-11T14:30:00Z

20230811T075526 [CTD_Seabird]:Failed to parse device response: 193.37,9#

20230811T081031 [CTD_Seabird]:Failed to parse device response: 1,3.87650,4401.69#

20230811T084923 [CTD_Seabird]:Failed to parse device response: .10#

20230811T091002 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20230811T091033 [NAL9602]:Queried for signal strength and failed to receive proper response.

20230811T091836 [CTD_Seabird]:Failed to parse device response: 8,3.93404,4693.77#

20230811T094258 [CTD_Seabird]:Failed to parse device response: 38,1947.42#

20230811T105515 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20230811T110223 [CTD_Seabird]:Failed to parse device response: .39#

20230811T110955 [CTD_Seabird]:Failed to parse device response: 66,4415.14#

20230811T111028 [ElevatorOffsetCalculator]:Completed estimation for commanded vars: speed 1.00 m/s, pitch -20.00 deg, mass-position 5.36 mm. Average elevator angle=2.232787 +/- 0.085299 deg (conf. level 99.90%, sigma: 0.337769 deg).

20230811T111518 [CTD_Seabird]:Failed to parse device response: 68.61.50#

20230811T113846 [CTD_Seabird]:Failed to parse device response: 7.47,1,4434.47#

20230811T120558 [CTD_Seabird]:Failed to parse device response: 22.43,13.962.12#

20230811T123834 [CBIT]:Beginning ground fault scan

20230811T123839 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20230811T124500 [CommandExec]:got command load ./Missions/Science/sci2.tl

20230811T124500 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Science/sci2.tx

20230811T124500 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/Science.tx

20230811T124502 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/NeedComms.tx

20230811T124502 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/StandardEnvelopes.tx

20230811T124502 [MissionManager]:Loading Compiled TethysL script from file Missions/Insert/BackseatDriver.tx

20230811T124502 [CommandExec]:Loaded ./Missions/Science/sci2.tl

20230811T124502 [MissionManager]:Started mission Default

20230811T124510 [CommandExec]:got command set sci2.MissionTimeout 16 hour

20230811T124510 [CommandExec]:got command set sci2.Repeat 2 count

20230811T124510 [CommandExec]:got command set sci2.Lat1 36.75 degree

20230811T124510 [CommandExec]:got command set sci2.Lon1 -122.4 degree

20230811T124510 [CommandExec]:got command set sci2.Lat2 36.75 degree

20230811T124510 [CommandExec]:got command set sci2.Lon2 -122.3 degree

20230811T124510 [CommandExec]:got command set sci2.Lat3 36.74 degree

20230811T124516 [CommandExec]:got command set sci2.Lon3 -122.4 degree

20230811T124516 [CommandExec]:got command set sci2.YoYoMaxDepth 50 meter

20230811T124516 [CommandExec]:got command set sci2.MaxDepth 60 meter

20230811T124516 [CommandExec]:got command run

20230811T124516 [CommandExec]:Running

20230811T124516 [MissionManager]:Started mission sci2

20230811T124518 [sci2:N.AltitudeEnvelope]:Altitude Measurement is not Active.

20230811T124518 [sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20230811T124520 [CTD_Seabird]:Failed to parse device response: #

20230811T131521 [sci2:NeedComms:D:A_Timeout:A]:Comms timed out after 30.000000 min minutes

20230811T141817 [CTD_Seabird]:Failed to parse device response: 41.24,11.219066#

20230811T142809 [NAL9602]:Queried for signal strength and failed to receive proper response.