2018-08-24T01:10:46.242Z,1535073046.242 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg 2018-08-24T01:10:50.316Z,1535073050.316 [SBIT](IMPORTANT): git: 2018-08-23 2018-08-24T01:10:50.317Z,1535073050.317 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2018-08-24T01:11:49.872Z,1535073109.872 [SBIT](IMPORTANT): Beginning Startup BIT 2018-08-24T01:11:49.878Z,1535073109.878 [CBIT](IMPORTANT): Beginning ground fault scan 2018-08-24T01:12:00.946Z,1535073120.946 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.012593 CHAN A1 (24V): -0.013197 CHAN A2 (12V): -0.005094 CHAN A3 (5V): -0.008399 CHAN B0 (3.3V): -0.003303 CHAN B1 (3.15aV): -0.002670 CHAN B2 (3.15bV): -0.001400 CHAN B3 (GND): -0.003767 OPEN: 0.012206 Full Scale Calc: 4.765 mA, -1.589 mA 2018-08-24T01:12:43.329Z,1535073163.329 [SBIT](IMPORTANT): SBIT PASSED 2018-08-24T01:12:43.381Z,1535073163.381 [CommandLine](IMPORTANT): got command configSet list 2018-08-24T01:12:43.381Z,1535073163.381 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2018-08-24T01:12:43.382Z,1535073163.382 [CommandLine](IMPORTANT): AcousticModem_Benthos_ATM900.loadAtStartup=0 bool; 2018-08-24T01:12:43.382Z,1535073163.382 [CommandLine](IMPORTANT): CTD_Seabird.minSalinityBound=0.9 practical_salinity_unit; 2018-08-24T01:12:43.382Z,1535073163.382 [CommandLine](IMPORTANT): Depth_Keller.offset=-0.56 decibar; 2018-08-24T01:12:43.382Z,1535073163.382 [CommandLine](IMPORTANT): Express linearApproximation height_above_sea_floor 2.000000 meter; 2018-08-24T01:12:43.382Z,1535073163.382 [CommandLine](IMPORTANT): Express linearApproximation mass_concentration_of_chlorophyll_in_sea_water 1.000000 microgram_per_liter; 2018-08-24T01:12:43.382Z,1535073163.382 [CommandLine](IMPORTANT): IBIT.batteryHibernationTimeout=1 minute; 2018-08-24T01:12:43.383Z,1535073163.383 [CommandLine](IMPORTANT): IBIT.batteryMissingStickThreshold=12 count; 2018-08-24T01:12:43.383Z,1535073163.383 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=380 cubic_centimeter; 2018-08-24T01:12:43.383Z,1535073163.383 [CommandLine](IMPORTANT): VerticalControl.massDefault=-1 centimeter; 2018-08-24T01:12:43.648Z,1535073163.648 [MissionManager](IMPORTANT): Started mission Startup 2018-08-24T01:12:50.721Z,1535073170.721 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T01:14:44.726Z,1535073284.726 [MissionManager](IMPORTANT): Started mission Default 2018-08-24T01:16:37.457Z,1535073397.457 [NAL9602](FAULT): Verify xmit timeout failure. 2018-08-24T01:16:38.776Z,1535073398.776 [DataOverHttps](IMPORTANT): SBD MTMSN=20180824T011538 2018-08-24T01:16:43.850Z,1535073403.850 [CommandLine](IMPORTANT): got command schedule asap "load Science/depth_sampling.xml;set DepthSampling.NumSamplers 2 count;set DepthSampling.MissionTimeout 5 hour;set DepthSampling.MaxWaitNoFiring 1 hour;set DepthSampling.RunToWaypointTimeout 1 hour" 3g65w 1 3.000000 2018-08-24T01:16:43.850Z,1535073403.850 [CommandLine](IMPORTANT): Scheduling command #1 of 3 with id=3g65w 2018-08-24T01:16:43.851Z,1535073403.851 [CommandLine](IMPORTANT): Scheduled #1 (#1 of 3 with id='3g65w'): "load Science/depth_sampling.xml;set DepthSampling.NumSamplers 2 count;set DepthSampling.MissionTimeout 5 hour;set DepthSampling.MaxWaitNoFiring 1 hour;set DepthSampling.RunToWaypointTimeout 1 hour" ASAP 2018-08-24T01:16:44.603Z,1535073404.603 [DataOverHttps](IMPORTANT): SBD MOMSN=8439486, MTMSN=20180824T011544 2018-08-24T01:16:50.193Z,1535073410.193 [CommandLine](IMPORTANT): got command schedule asap "set DepthSampling.SpeedApproachingTarget 0 meter_per_second;set DepthSampling.SpeedSampling 0 meter_per_second;set DepthSampling.MaxDepth 7 meter;set DepthSampling.DepthLevelFlight 3 meter;set DepthSampling.Depth1 3 meter" 3g65w 2 3.000000 2018-08-24T01:16:50.196Z,1535073410.196 [CommandLine](IMPORTANT): Scheduling command #2 of 3 with id=3g65w 2018-08-24T01:16:50.197Z,1535073410.197 [CommandLine](IMPORTANT): Scheduled #2 (#2 of 3 with id='3g65w'): "set DepthSampling.SpeedApproachingTarget 0 meter_per_second;set DepthSampling.SpeedSampling 0 meter_per_second;set DepthSampling.MaxDepth 7 meter;set DepthSampling.DepthLevelFlight 3 meter;set DepthSampling.Depth1 3 meter" ASAP 2018-08-24T01:16:50.924Z,1535073410.924 [DataOverHttps](IMPORTANT): SBD MTMSN=20180824T011551 2018-08-24T01:16:55.902Z,1535073415.902 [CommandLine](IMPORTANT): got command schedule asap "set DepthSampling.Depth2 3 meter;set DepthSampling.WaitDepUndulation1 10 minute;set DepthSampling.WaitDepUndulation2 5 minute;set DepthSampling.MinAltitude 0.0 meter;set DepthSampling:StandardEnvelopes.MinAltitude 0 meter;run " 3g65w 3 3.000000 2018-08-24T01:16:55.902Z,1535073415.902 [CommandLine](IMPORTANT): Scheduling command #3 of 3 with id=3g65w 2018-08-24T01:16:55.903Z,1535073415.903 [CommandLine](IMPORTANT): Scheduled #3 (#3 of 3 with id='3g65w'): "set DepthSampling.Depth2 3 meter;set DepthSampling.WaitDepUndulation1 10 minute;set DepthSampling.WaitDepUndulation2 5 minute;set DepthSampling.MinAltitude 0.0 meter;set DepthSampling:StandardEnvelopes.MinAltitude 0 meter;run " ASAP 2018-08-24T01:16:55.998Z,1535073415.998 [CommandLine](IMPORTANT): got command load ./Missions/Science/depth_sampling.xml 2018-08-24T01:17:12.942Z,1535073432.942 [CommandLine](IMPORTANT): Loaded ./Missions/Science/depth_sampling.xml 2018-08-24T01:17:40.116Z,1535073460.116 [CommandLine](IMPORTANT): got command set DepthSampling.NumSamplers 2.000000 count 2018-08-24T01:17:40.116Z,1535073460.116 [CommandLine](IMPORTANT): got command set DepthSampling.MissionTimeout 5.000000 hour 2018-08-24T01:17:40.146Z,1535073460.146 [CommandLine](IMPORTANT): got command set DepthSampling.MaxWaitNoFiring 1.000000 hour 2018-08-24T01:17:40.147Z,1535073460.147 [CommandLine](IMPORTANT): got command set DepthSampling.RunToWaypointTimeout 1.000000 hour 2018-08-24T01:18:05.197Z,1535073485.197 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T01:18:09.975Z,1535073489.975 [CommandLine](IMPORTANT): got command set DepthSampling.SpeedApproachingTarget 0.000000 meter_per_second 2018-08-24T01:18:09.976Z,1535073489.976 [CommandLine](IMPORTANT): got command set DepthSampling.SpeedSampling 0.000000 meter_per_second 2018-08-24T01:18:09.981Z,1535073489.981 [CommandLine](IMPORTANT): got command set DepthSampling.MaxDepth 7.000000 meter 2018-08-24T01:18:09.982Z,1535073489.982 [CommandLine](IMPORTANT): got command set DepthSampling.DepthLevelFlight 3.000000 meter 2018-08-24T01:18:09.983Z,1535073489.983 [CommandLine](IMPORTANT): got command set DepthSampling.Depth1 3.000000 meter 2018-08-24T01:18:38.035Z,1535073518.035 [CommandLine](IMPORTANT): got command set DepthSampling.Depth2 3.000000 meter 2018-08-24T01:18:38.036Z,1535073518.036 [CommandLine](IMPORTANT): got command set DepthSampling.WaitDepUndulation1 10.000000 minute 2018-08-24T01:18:38.036Z,1535073518.036 [CommandLine](IMPORTANT): got command set DepthSampling.WaitDepUndulation2 5.000000 minute 2018-08-24T01:18:38.037Z,1535073518.037 [CommandLine](IMPORTANT): got command set DepthSampling.MinAltitude 0.000000 meter 2018-08-24T01:18:38.038Z,1535073518.038 [CommandLine](IMPORTANT): got command set DepthSampling:StandardEnvelopes.MinAltitude 0.000000 meter 2018-08-24T01:18:38.039Z,1535073518.039 [CommandLine](IMPORTANT): got command run 2018-08-24T01:18:38.061Z,1535073518.061 [CommandLine](IMPORTANT): Running 2018-08-24T01:18:39.957Z,1535073519.957 [MissionManager](IMPORTANT): Started mission DepthSampling 2018-08-24T01:18:40.124Z,1535073520.124 [DepthSampling:AbortDrift:B.AbortDrift](IMPORTANT): Acoustic timeout set to: 21.00 hours. 2018-08-24T01:20:08.415Z,1535073608.415 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T01:23:11.566Z,1535073791.566 [DepthSampling:Transit:K](IMPORTANT): Transit and NeedComms completed. Go down from -0.050088 m . 2018-08-24T01:23:15.130Z,1535073795.130 [DepthSampling:TakeSamples:SampleAtConstantDepth:A](IMPORTANT): Taking sample No. 1.000000 count at 3.000000 m . 2018-08-24T01:23:35.127Z,1535073815.127 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T01:28:39.996Z,1535074119.996 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T01:28:40.216Z,1535074120.216 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-24T01:43:08.670Z,1535074988.670 [ESPComponent](IMPORTANT): Setting regex for ESP Log summary: 'Selecting Cartridge|Sampled|Error|Fail|Retry|Cmd::|Sampler::' 2018-08-24T01:43:13.072Z,1535074993.072 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-08-24T01:43:13.073Z,1535074993.073 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.5.2:10.89.5.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-08-24T01:43:13.150Z,1535074993.150 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-08-24T01:43:13.308Z,1535074993.308 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-08-24T01:43:47.934Z,1535075027.934 [ESPComponent](IMPORTANT): ESP has connected as client 2018-08-24T01:43:48.797Z,1535075028.797 [ESPComponent](IMPORTANT): [sample #1] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-08-24T01:43:49.153Z,1535075029.153 [DepthSampling:SampleAtDepth:SampleWrapper:SampleESP:B](IMPORTANT): ESP sampling at 0.188993 m inwater with 2.652780 ug/l chlorophyll fluorescence. 2018-08-24T01:43:49.896Z,1535075029.896 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PREPARING_SHOW_LOG 2018-08-24T01:43:50.306Z,1535075030.306 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-08-24T01:43:51.913Z,1535075031.913 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_LOADING_CARTRIDGE 2018-08-24T01:44:34.525Z,1535075074.525 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_FILTERING 2018-08-24T01:44:36.941Z,1535075076.941 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_WAITING_FOR_PAUSED 2018-08-24T01:45:19.729Z,1535075119.729 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T01:50:27.413Z,1535075427.413 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T01:56:04.725Z,1535075764.725 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T02:02:13.257Z,1535076133.257 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T02:10:04.220Z,1535076604.220 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T02:10:04.298Z,1535076604.298 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-24T02:25:31.636Z,1535077531.636 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T02:28:26.876Z,1535077706.876 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PROCESSING 2018-08-24T02:28:29.255Z,1535077709.255 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-08-24T02:33:34.973Z,1535078014.973 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T02:36:52.887Z,1535078212.887 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T02:41:32.316Z,1535078492.316 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T02:47:14.232Z,1535078834.232 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T02:47:14.795Z,1535078834.795 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-24T02:48:23.584Z,1535078903.584 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 14 sticks. 2018-08-24T03:05:32.916Z,1535079932.916 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T03:08:53.632Z,1535080133.632 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T03:19:07.365Z,1535080747.365 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T03:19:36.518Z,1535080776.518 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_STOPPING 2018-08-24T03:20:09.592Z,1535080809.592 [ESPComponent](IMPORTANT): [sample #1] ESP sampling sequence completed normally. 2018-08-24T03:20:09.858Z,1535080809.858 [ESPComponent](IMPORTANT): [sample #1] ESP log summary report (2 messages): @21:43:01.32 Selecting Cartridge 55 @22:27:17.06 Sampled 1000.0ml 2018-08-24T03:20:10.321Z,1535080810.321 [DepthSampling:SampleAtDepthWrapper:H](IMPORTANT): ESP sample No. 1.000000 count completed. 2018-08-24T03:20:12.337Z,1535080812.337 [DepthSampling:TakeSamples:NoFiringForTooLong:B](IMPORTANT): No firing for too long. Stopping mission. FromLastTimeFixToNow, FromLastTimeFixToLastFiring = 117.033195 min , nan min 2018-08-24T03:20:12.817Z,1535080812.817 [CommandLine](IMPORTANT): got command stop 2018-08-24T03:20:12.817Z,1535080812.817 [CommandLine](IMPORTANT): Scheduling is paused 2018-08-24T03:20:13.798Z,1535080813.798 [CTD_Seabird](FAULT): LCB fault: Software Overcurrent. 2018-08-24T03:20:14.013Z,1535080814.013 [MissionManager](IMPORTANT): Started mission Default 2018-08-24T03:26:26.599Z,1535081186.599 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T03:29:59.204Z,1535081399.204 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 9.746583 min 2018-08-24T03:34:52.793Z,1535081692.793 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T03:34:52.807Z,1535081692.807 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-24T03:36:40.000Z,1535081801.000 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 16.443104 min 2018-08-24T03:37:47.556Z,1535081867.556 [DataOverHttps](IMPORTANT): SBD MTMSN=20180824T033634 2018-08-24T03:37:53.459Z,1535081873.459 [CommandLine](IMPORTANT): got command schedule asap "load Transport/keepstation.xml;set keepstation.NeedCommsTime 15 minute;set keepstation.Depth 3 meter;set keepstation.ApproachDepth 2 meter;set keepstation.DepthDeadband 0.1 meter;set keepstation.Speed 1 meter_per_second" 3gcnk 1 2.000000 2018-08-24T03:37:53.459Z,1535081873.459 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=3gcnk 2018-08-24T03:37:53.460Z,1535081873.460 [CommandLine](IMPORTANT): Scheduled #4 (#1 of 2 with id='3gcnk'): "load Transport/keepstation.xml;set keepstation.NeedCommsTime 15 minute;set keepstation.Depth 3 meter;set keepstation.ApproachDepth 2 meter;set keepstation.DepthDeadband 0.1 meter;set keepstation.Speed 1 meter_per_second" ASAP 2018-08-24T03:37:54.188Z,1535081874.188 [DataOverHttps](IMPORTANT): SBD MOMSN=8439677, MTMSN=20180824T033641 2018-08-24T03:38:01.362Z,1535081881.362 [CommandLine](IMPORTANT): got command schedule asap "set keepstation.MaxDepth 6 meter;run " 3gcnk 2 2.000000 2018-08-24T03:38:01.362Z,1535081881.362 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=3gcnk 2018-08-24T03:38:01.364Z,1535081881.364 [CommandLine](IMPORTANT): Scheduled #5 (#2 of 2 with id='3gcnk'): "set keepstation.MaxDepth 6 meter;run " ASAP 2018-08-24T03:38:01.478Z,1535081881.478 [CommandLine](IMPORTANT): got command load ./Missions/Transport/keepstation.xml 2018-08-24T03:38:02.350Z,1535081882.350 [CommandLine](IMPORTANT): Loaded ./Missions/Transport/keepstation.xml 2018-08-24T03:38:22.102Z,1535081902.102 [CommandLine](IMPORTANT): got command set keepstation.NeedCommsTime 15.000000 minute 2018-08-24T03:38:22.103Z,1535081902.103 [CommandLine](IMPORTANT): got command set keepstation.Depth 3.000000 meter 2018-08-24T03:38:22.104Z,1535081902.104 [CommandLine](IMPORTANT): got command set keepstation.ApproachDepth 2.000000 meter 2018-08-24T03:38:22.105Z,1535081902.105 [CommandLine](IMPORTANT): got command set keepstation.DepthDeadband 0.100000 meter 2018-08-24T03:38:22.106Z,1535081902.106 [CommandLine](IMPORTANT): got command set keepstation.Speed 1.000000 meter_per_second 2018-08-24T03:38:26.191Z,1535081906.191 [CommandLine](IMPORTANT): got command set keepstation.MaxDepth 6.000000 meter 2018-08-24T03:38:26.193Z,1535081906.193 [CommandLine](IMPORTANT): got command run 2018-08-24T03:38:26.195Z,1535081906.195 [CommandLine](IMPORTANT): Running 2018-08-24T03:38:27.008Z,1535081907.008 [MissionManager](IMPORTANT): Started mission keepstation 2018-08-24T03:41:12.660Z,1535082072.660 [CommandLine](IMPORTANT): got command stop 2018-08-24T03:41:13.135Z,1535082073.135 [MissionManager](IMPORTANT): Started mission Default 2018-08-24T03:42:54.268Z,1535082174.268 [DataOverHttps](IMPORTANT): SBD MTMSN=20180824T034140 2018-08-24T03:43:00.742Z,1535082180.742 [CommandLine](IMPORTANT): got command schedule asap "load Science/spiralSample.xml;set spiralSample.MissionTimeout 3 hour;set spiralSample.NeedCommsTime 3 hour;set spiralSample.Depth 3 meter;set spiralSample.SpeedSpiral 0 meter_per_second" 3gcw9 1 2.000000 2018-08-24T03:43:00.743Z,1535082180.743 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=3gcw9 2018-08-24T03:43:00.744Z,1535082180.744 [CommandLine](IMPORTANT): Scheduled #6 (#1 of 2 with id='3gcw9'): "load Science/spiralSample.xml;set spiralSample.MissionTimeout 3 hour;set spiralSample.NeedCommsTime 3 hour;set spiralSample.Depth 3 meter;set spiralSample.SpeedSpiral 0 meter_per_second" ASAP 2018-08-24T03:43:01.468Z,1535082181.468 [DataOverHttps](IMPORTANT): SBD MTMSN=20180824T034148 2018-08-24T03:43:05.966Z,1535082185.966 [CommandLine](IMPORTANT): got command schedule asap "set spiralSample.SpeedSampling 0 meter_per_second;set spiralSample.MinAltitude 0 meter;set spiralSample.MaxDepth 9 meter;set spiralSample.MinOffshore 1 kilometer;run " 3gcw9 2 2.000000 2018-08-24T03:43:05.966Z,1535082185.966 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=3gcw9 2018-08-24T03:43:05.967Z,1535082185.967 [CommandLine](IMPORTANT): Scheduled #7 (#2 of 2 with id='3gcw9'): "set spiralSample.SpeedSampling 0 meter_per_second;set spiralSample.MinAltitude 0 meter;set spiralSample.MaxDepth 9 meter;set spiralSample.MinOffshore 1 kilometer;run " ASAP 2018-08-24T03:43:06.095Z,1535082186.095 [CommandLine](IMPORTANT): got command load ./Missions/Science/spiralSample.xml 2018-08-24T03:43:08.702Z,1535082188.702 [CommandLine](IMPORTANT): Loaded ./Missions/Science/spiralSample.xml 2018-08-24T03:43:24.256Z,1535082204.256 [CommandLine](IMPORTANT): got command set spiralSample.MissionTimeout 3.000000 hour 2018-08-24T03:43:24.257Z,1535082204.257 [CommandLine](IMPORTANT): got command set spiralSample.NeedCommsTime 3.000000 hour 2018-08-24T03:43:24.257Z,1535082204.257 [CommandLine](IMPORTANT): got command set spiralSample.Depth 3.000000 meter 2018-08-24T03:43:24.258Z,1535082204.258 [CommandLine](IMPORTANT): got command set spiralSample.SpeedSpiral 0.000000 meter_per_second 2018-08-24T03:43:40.289Z,1535082220.289 [CommandLine](IMPORTANT): got command set spiralSample.SpeedSampling 0.000000 meter_per_second 2018-08-24T03:43:40.289Z,1535082220.289 [CommandLine](IMPORTANT): got command set spiralSample.MinAltitude 0.000000 meter 2018-08-24T03:43:40.290Z,1535082220.290 [CommandLine](IMPORTANT): got command set spiralSample.MaxDepth 9.000000 meter 2018-08-24T03:43:40.291Z,1535082220.291 [CommandLine](IMPORTANT): got command set spiralSample.MinOffshore 1.000000 kilometer 2018-08-24T03:43:40.291Z,1535082220.291 [CommandLine](IMPORTANT): got command run 2018-08-24T03:43:40.294Z,1535082220.294 [CommandLine](IMPORTANT): Running 2018-08-24T03:43:40.389Z,1535082220.389 [MissionManager](IMPORTANT): Started mission spiralSample 2018-08-24T03:50:14.615Z,1535082614.615 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-08-24T03:50:14.616Z,1535082614.616 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.5.2:10.89.5.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-08-24T03:50:14.653Z,1535082614.653 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-08-24T03:50:14.850Z,1535082614.850 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-08-24T03:50:49.499Z,1535082649.499 [ESPComponent](IMPORTANT): ESP has connected as client 2018-08-24T03:50:50.452Z,1535082650.452 [ESPComponent](IMPORTANT): [sample #2] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-08-24T03:50:50.732Z,1535082650.732 [spiralSample:SampleAtDepth:SampleWrapper:SampleESP:B](IMPORTANT): ESP sampling at 8.154318 m inwater with 0.033060 ug/l chlorophyll fluorescence. 2018-08-24T03:50:51.100Z,1535082651.100 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PREPARING_SHOW_LOG 2018-08-24T03:50:51.506Z,1535082651.506 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-08-24T03:50:53.498Z,1535082653.498 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_LOADING_CARTRIDGE 2018-08-24T03:51:32.150Z,1535082692.150 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_FILTERING 2018-08-24T03:51:34.569Z,1535082694.569 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_WAITING_FOR_PAUSED 2018-08-24T03:59:12.346Z,1535083152.346 [Radio_Surface](FAULT): LCB fault: LCB Watchdog Reset. Invalid Command. Hardware Overcurrent Shutdown. Software Overcurrent. 2018-08-24T03:59:39.901Z,1535083179.901 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T04:02:42.787Z,1535083362.787 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T04:04:45.373Z,1535083485.373 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T04:16:06.112Z,1535084166.112 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks. 2018-08-24T04:18:10.653Z,1535084290.653 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T04:26:02.404Z,1535084762.404 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T04:26:02.611Z,1535084762.611 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-24T04:37:08.049Z,1535085428.049 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 15 sticks. 2018-08-24T04:39:29.976Z,1535085569.976 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T04:39:41.422Z,1535085581.422 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PROCESSING 2018-08-24T04:39:43.934Z,1535085583.934 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-08-24T04:49:23.087Z,1535086163.087 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T04:51:09.805Z,1535086269.805 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_STOPPING 2018-08-24T04:51:36.351Z,1535086296.351 [ESPComponent](IMPORTANT): [sample #2] ESP sampling sequence completed normally. 2018-08-24T04:51:36.732Z,1535086296.732 [ESPComponent](IMPORTANT): [sample #2] ESP log summary report (3 messages): @23:49:51.25 Selecting Cartridge 54 @00:38:19.37 Cartridge::Sampler::Clogged in FILTERING -- Cartridge clogged @00:38:19.47 Sampled 689.2ml 2018-08-24T04:52:01.932Z,1535086321.932 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T04:58:10.182Z,1535086690.182 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 15 sticks. 2018-08-24T04:58:24.297Z,1535086704.297 [MissionManager](IMPORTANT): Started mission Default 2018-08-24T04:58:25.056Z,1535086705.056 [Aanderaa_O2](FAULT): LCB fault: Software Overcurrent. 2018-08-24T05:04:05.265Z,1535087045.265 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 5.676081 min 2018-08-24T05:10:02.719Z,1535087402.719 [CommandLine](IMPORTANT): got command show variable navchartdb 2018-08-24T05:10:03.004Z,1535087403.004 [CommandLine](IMPORTANT): NavChartDb.charts (none) 2018-08-24T05:10:03.009Z,1535087403.009 [CommandLine](IMPORTANT): NavChartDb.cycleTimeout (millisecond) 2018-08-24T05:10:03.133Z,1535087403.133 [CommandLine](IMPORTANT): NavChartDb.closestDistance (meter) 2018-08-24T05:10:03.133Z,1535087403.133 [CommandLine](IMPORTANT): NavChartDb.nextDistance (meter) 2018-08-24T05:10:03.133Z,1535087403.133 [CommandLine](IMPORTANT): NavChartDb.closestDepth (meter) 2018-08-24T05:10:03.134Z,1535087403.134 [CommandLine](IMPORTANT): NavChartDb.nextDepth (meter) 2018-08-24T05:10:03.234Z,1535087403.234 [CommandLine](IMPORTANT): NavChartDb.durationOfLastRun (second) 2018-08-24T05:10:06.040Z,1535087406.040 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-24T05:10:15.438Z,1535087415.438 [CommandLine](IMPORTANT): got command show variable navchart 2018-08-24T05:10:15.726Z,1535087415.726 [CommandLine](IMPORTANT): NavChart.loadAtStartup (bool) 2018-08-24T05:10:15.726Z,1535087415.726 [CommandLine](IMPORTANT): NavChartDb.charts (none) 2018-08-24T05:10:15.726Z,1535087415.726 [CommandLine](IMPORTANT): NavChartDb.cycleTimeout (millisecond) 2018-08-24T05:10:15.876Z,1535087415.876 [CommandLine](IMPORTANT): NavChart.sea_floor_depth_below_geoid (meter) 2018-08-24T05:10:15.876Z,1535087415.876 [CommandLine](IMPORTANT): NavChart.height_above_sea_floor (meter) 2018-08-24T05:10:15.877Z,1535087415.877 [CommandLine](IMPORTANT): NavChart.distance_from_shore (meter) 2018-08-24T05:10:15.882Z,1535087415.882 [CommandLine](IMPORTANT): NavChartDb.closestDistance (meter) 2018-08-24T05:10:15.882Z,1535087415.882 [CommandLine](IMPORTANT): NavChartDb.nextDistance (meter) 2018-08-24T05:10:15.883Z,1535087415.883 [CommandLine](IMPORTANT): NavChartDb.closestDepth (meter) 2018-08-24T05:10:15.883Z,1535087415.883 [CommandLine](IMPORTANT): NavChartDb.nextDepth (meter) 2018-08-24T05:10:15.940Z,1535087415.940 [CommandLine](IMPORTANT): NavChart.durationOfLastRun (second) 2018-08-24T05:10:15.952Z,1535087415.952 [CommandLine](IMPORTANT): NavChartDb.durationOfLastRun (second) 2018-08-24T05:10:32.564Z,1535087432.564 [CommandLine](IMPORTANT): got command get NavChart.loadAtStartup 2018-08-24T05:10:32.564Z,1535087432.564 [CommandLine](IMPORTANT): NavChart.loadAtStartup 1 bool 2018-08-24T05:11:07.180Z,1535087467.180 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 12.708379 min 2018-08-24T05:12:00.008Z,1535087520.008 [CommandLine](IMPORTANT): got command show variable altitude 2018-08-24T05:12:00.076Z,1535087520.076 [CommandLine](IMPORTANT): Rowe_600.altitudeAccuracy (meter) 2018-08-24T05:12:00.078Z,1535087520.078 [CommandLine](IMPORTANT): Rowe_600LCM.altitudeAccuracy (meter) 2018-08-24T05:12:00.150Z,1535087520.150 [CommandLine](IMPORTANT): Rowe_600LCM.Altitude1 (meter) 2018-08-24T05:12:00.151Z,1535087520.151 [CommandLine](IMPORTANT): Rowe_600LCM.Altitude2 (meter) 2018-08-24T05:12:00.151Z,1535087520.151 [CommandLine](IMPORTANT): Rowe_600LCM.Altitude3 (meter) 2018-08-24T05:12:00.152Z,1535087520.152 [CommandLine](IMPORTANT): Rowe_600LCM.Altitude4 (meter) 2018-08-24T05:12:05.441Z,1535087525.441 [CommandLine](IMPORTANT): got command show variable height 2018-08-24T05:12:05.444Z,1535087525.444 [CommandLine](IMPORTANT): height_above_sea_floor (meter) 2018-08-24T05:12:05.679Z,1535087525.679 [CommandLine](IMPORTANT): Rowe_600LCM.height_above_sea_floor (meter) 2018-08-24T05:12:05.785Z,1535087525.785 [CommandLine](IMPORTANT): NavChart.height_above_sea_floor (meter) 2018-08-24T05:15:18.128Z,1535087718.128 [DataOverHttps](IMPORTANT): SBD MTMSN=20180824T051356 2018-08-24T05:15:23.644Z,1535087723.644 [CommandLine](IMPORTANT): got command configSet NavChart.loadAtStartup 0.000000 bool persist 2018-08-24T05:15:23.645Z,1535087723.645 [CommandLine](IMPORTANT): configSet NavChart.loadAtStartup requires a restart to take effect. 2018-08-24T05:16:25.324Z,1535087785.324 [DataOverHttps](IMPORTANT): SBD MTMSN=20180824T051503 2018-08-24T05:16:30.489Z,1535087790.489 [CommandLine](IMPORTANT): got command restart application