2018-08-22T23:56:35.769Z,1534982195.769 [SBIT](CRITICAL): SBIT FAILED 2018-08-22T23:54:08.002Z,1534982048.002 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg 2018-08-22T23:54:10.255Z,1534982050.255 [SBIT](IMPORTANT): git: 2018-08-21 2018-08-22T23:54:10.256Z,1534982050.256 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2018-08-22T23:54:10.857Z,1534982050.857 [WetLabsBB2FL](FAULT): LCB fault: Software Overcurrent. 2018-08-22T23:55:41.766Z,1534982141.766 [SBIT](IMPORTANT): Beginning Startup BIT 2018-08-22T23:55:41.774Z,1534982141.774 [CBIT](IMPORTANT): Beginning ground fault scan 2018-08-22T23:55:52.726Z,1534982152.726 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.014286 CHAN A1 (24V): -0.013158 CHAN A2 (12V): -0.005210 CHAN A3 (5V): -0.002348 CHAN B0 (3.3V): -0.001270 CHAN B1 (3.15aV): -0.000340 CHAN B2 (3.15bV): -0.001047 CHAN B3 (GND): -0.000027 OPEN: 0.004867 Full Scale Calc: 4.765 mA, -1.589 mA 2018-08-22T23:56:10.656Z,1534982170.656 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-22T23:56:35.369Z,1534982195.369 [SBIT](FAULT): Mass: EXPECTED:-0.018000 ACTUAL:-0.013002 2018-08-22T23:56:35.369Z,1534982195.369 [SBIT](FAULT): Control surface position failure. 2018-08-22T23:56:35.818Z,1534982195.818 [CommandLine](IMPORTANT): got command configSet list 2018-08-22T23:56:35.819Z,1534982195.819 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2018-08-22T23:56:35.820Z,1534982195.820 [CommandLine](IMPORTANT): Aanderaa_O2.loadAtStartup=0 bool; 2018-08-22T23:56:35.820Z,1534982195.820 [CommandLine](IMPORTANT): AcousticModem_Benthos_ATM900.loadAtStartup=0 bool; 2018-08-22T23:56:35.820Z,1534982195.820 [CommandLine](IMPORTANT): BPC1.loadAtStartup=0 bool; 2018-08-22T23:56:35.820Z,1534982195.820 [CommandLine](IMPORTANT): Express linearApproximation mass_concentration_of_chlorophyll_in_sea_water 1.000000 microgram_per_liter; 2018-08-22T23:56:35.820Z,1534982195.820 [CommandLine](IMPORTANT): IBIT.batteryHibernationTimeout=1 minute; 2018-08-22T23:56:35.820Z,1534982195.820 [CommandLine](IMPORTANT): IBIT.batteryMissingStickThreshold=12 count; 2018-08-22T23:56:35.820Z,1534982195.820 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=200 cubic_centimeter; 2018-08-22T23:56:35.821Z,1534982195.821 [CommandLine](IMPORTANT): VerticalControl.massDefault=-1.8 centimeter; 2018-08-22T23:56:35.827Z,1534982195.827 [CommandLine](FAULT): Scheduling is paused 2018-08-22T23:56:36.186Z,1534982196.186 [MissionManager](IMPORTANT): Started mission Startup 2018-08-22T23:58:12.880Z,1534982292.880 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-22T23:58:36.982Z,1534982316.982 [MissionManager](IMPORTANT): Started mission Default 2018-08-22T23:59:52.516Z,1534982392.516 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-08-23T00:00:15.833Z,1534982415.833 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-23T00:02:21.241Z,1534982541.241 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-23T00:47:51.543Z,1534985271.543 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-08-23T00:04:24.217Z,1534982664.217 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-23T00:04:24.672Z,1534982664.672 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-23T00:04:54.502Z,1534982694.502 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-08-23T00:07:11.036Z,1534982831.036 [DataOverHttps](IMPORTANT): SBD MTMSN=20180823T000615 2018-08-23T00:07:15.458Z,1534982835.458 [CommandLine](IMPORTANT): got command schedule asap "load Maintenance/sample.xml;set sample.MissionTimeout 3 hour;set sample.Depth 0 meter;set sample.WaitBeforeSample 3 second;set sample:SampleAtDepth.Speed 0 meter_per_second" 3e890 1 2.000000 2018-08-23T00:07:15.458Z,1534982835.458 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=3e890 2018-08-23T00:07:15.459Z,1534982835.459 [CommandLine](IMPORTANT): Scheduled #1 (#1 of 2 with id='3e890'): "load Maintenance/sample.xml;set sample.MissionTimeout 3 hour;set sample.Depth 0 meter;set sample.WaitBeforeSample 3 second;set sample:SampleAtDepth.Speed 0 meter_per_second" ASAP 2018-08-23T00:07:16.224Z,1534982836.224 [DataOverHttps](IMPORTANT): SBD MTMSN=20180823T000621 2018-08-23T00:07:20.657Z,1534982840.657 [CommandLine](IMPORTANT): got command schedule asap "set sample:SampleAtDepth.SpeedApproachingDepth 0 meter_per_second;set sample:SampleAtDepth.SpeedSamplingAtDepth 0 meter_per_second;set sample:SampleAtDepth.TargetDepth 0 meter;run " 3e890 2 2.000000 2018-08-23T00:07:20.658Z,1534982840.658 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=3e890 2018-08-23T00:07:20.659Z,1534982840.659 [CommandLine](IMPORTANT): Scheduled #2 (#2 of 2 with id='3e890'): "set sample:SampleAtDepth.SpeedApproachingDepth 0 meter_per_second;set sample:SampleAtDepth.SpeedSamplingAtDepth 0 meter_per_second;set sample:SampleAtDepth.TargetDepth 0 meter;run " ASAP 2018-08-23T00:07:20.861Z,1534982840.861 [CommandLine](IMPORTANT): got command load ./Missions/Maintenance/sample.xml 2018-08-23T00:07:21.560Z,1534982841.560 [CommandLine](IMPORTANT): Loaded ./Missions/Maintenance/sample.xml 2018-08-23T00:07:26.864Z,1534982846.864 [CommandLine](IMPORTANT): got command set sample.MissionTimeout 3.000000 hour 2018-08-23T00:07:26.865Z,1534982846.865 [CommandLine](IMPORTANT): got command set sample.Depth 0.000000 meter 2018-08-23T00:07:26.865Z,1534982846.865 [CommandLine](IMPORTANT): got command set sample.WaitBeforeSample 3.000000 second 2018-08-23T00:07:26.866Z,1534982846.866 [CommandLine](IMPORTANT): got command set sample:SampleAtDepth.Speed 0.000000 meter_per_second 2018-08-23T00:07:33.299Z,1534982853.299 [CommandLine](IMPORTANT): got command set sample:SampleAtDepth.SpeedApproachingDepth 0.000000 meter_per_second 2018-08-23T00:07:33.300Z,1534982853.300 [CommandLine](IMPORTANT): got command set sample:SampleAtDepth.SpeedSamplingAtDepth 0.000000 meter_per_second 2018-08-23T00:07:33.301Z,1534982853.301 [CommandLine](IMPORTANT): got command set sample:SampleAtDepth.TargetDepth 0.000000 meter 2018-08-23T00:07:33.301Z,1534982853.301 [CommandLine](IMPORTANT): got command run 2018-08-23T00:07:33.303Z,1534982853.303 [CommandLine](IMPORTANT): Running 2018-08-23T00:07:33.431Z,1534982853.431 [MissionManager](IMPORTANT): Started mission sample 2018-08-23T00:15:38.690Z,1534983338.690 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-08-23T00:16:25.345Z,1534983385.345 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-23T00:16:26.722Z,1534983386.722 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-23T00:18:27.748Z,1534983507.748 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-23T00:20:29.932Z,1534983629.932 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-23T00:22:32.889Z,1534983752.889 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-23T00:24:35.319Z,1534983875.319 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-23T00:24:35.463Z,1534983875.463 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-23T00:26:22.139Z,1534983982.139 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-08-23T00:36:36.392Z,1534984596.392 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-23T00:36:37.697Z,1534984597.697 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-23T00:37:08.939Z,1534984628.939 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-08-23T00:38:38.568Z,1534984718.568 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-23T00:40:40.792Z,1534984840.792 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-23T00:42:43.780Z,1534984963.780 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-23T00:44:45.969Z,1534985085.969 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-23T00:44:46.043Z,1534985086.043 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-23T00:44:47.366Z,1534985087.366 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-23T00:47:51.475Z,1534985271.475 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-08-23T00:47:52.725Z,1534985272.725 [MissionManager](IMPORTANT): Started mission Default