2019-10-09T19:27:37.757Z,1570649257.757 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2019-10-09T19:27:42.526Z,1570649262.526 [SBIT](IMPORTANT): git: 2019-10-01_A
2019-10-09T19:27:42.527Z,1570649262.527 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2019-10-09T19:28:50.962Z,1570649330.962 [SBIT](IMPORTANT): Beginning Startup BIT
2019-10-09T19:28:50.966Z,1570649330.966 [CBIT](IMPORTANT): Beginning ground fault scan
2019-10-09T19:29:01.723Z,1570649341.723 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.028173
CHAN A1 (24V): -0.019000
CHAN A2 (12V): -0.005267
CHAN A3 (5V): -0.003202
CHAN B0 (3.3V): -0.001754
CHAN B1 (3.15aV): -0.001302
CHAN B2 (3.15bV): -0.001037
CHAN B3 (GND): -0.000798
OPEN: 0.012294
Full Scale Calc: 4.765 mA, -1.589 mA
2019-10-09T19:29:45.074Z,1570649385.074 [SBIT](IMPORTANT): SBIT PASSED
2019-10-09T19:29:45.155Z,1570649385.155 [CommandLine](IMPORTANT): got command configSet list
2019-10-09T19:29:45.155Z,1570649385.155 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2019-10-09T19:29:45.156Z,1570649385.156 [CommandLine](IMPORTANT): BPC1.batteryMissingStickThreshold=2 count;

2019-10-09T19:29:45.156Z,1570649385.156 [CommandLine](IMPORTANT): CBIT.abortDepth=300 meter;

2019-10-09T19:29:45.157Z,1570649385.157 [CommandLine](IMPORTANT): CBIT.stopDepth=290 meter;

2019-10-09T19:29:45.157Z,1570649385.157 [CommandLine](IMPORTANT): DAT.loadAtStartup=0 bool;

2019-10-09T19:29:45.157Z,1570649385.157 [CommandLine](IMPORTANT): DVL_micro.loadAtStartup=0 bool;

2019-10-09T19:29:45.157Z,1570649385.157 [CommandLine](IMPORTANT): DataOverHttps.timeout=1 minute;

2019-10-09T19:29:45.157Z,1570649385.157 [CommandLine](IMPORTANT): Express none CTD_Seabird.bin_median_sea_water_salinity;

2019-10-09T19:29:45.157Z,1570649385.157 [CommandLine](IMPORTANT): Express linearApproximation WetLabsBB2FL.bin_mean_mass_concentration_of_chlorophyll_in_sea_water 0.100000 microgram_per_liter;

2019-10-09T19:29:45.157Z,1570649385.157 [CommandLine](IMPORTANT): Express linearApproximation depth 5.000000 meter;

2019-10-09T19:29:45.157Z,1570649385.157 [CommandLine](IMPORTANT): Express linearApproximation latitude 0.005000 degree;

2019-10-09T19:29:45.157Z,1570649385.157 [CommandLine](IMPORTANT): Express linearApproximation longitude 0.005000 degree;

2019-10-09T19:29:45.157Z,1570649385.157 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=188 cubic_centimeter;

2019-10-09T19:29:45.158Z,1570649385.158 [CommandLine](IMPORTANT): VerticalControl.massDefault=12 millimeter;

2019-10-09T19:29:45.504Z,1570649385.504 [MissionManager](IMPORTANT): Started mission Startup
2019-10-09T19:31:46.471Z,1570649506.471 [MissionManager](IMPORTANT): Started mission Default
2019-10-09T19:42:27.969Z,1570650147.969 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.684874 min 
2019-10-09T19:49:07.516Z,1570650547.516 [DataOverHttps](IMPORTANT): SBD MTMSN=20191009T193517
2019-10-09T19:49:14.879Z,1570650554.879 [CommandLine](IMPORTANT): got command load ./Missions/Science/sci2_flat_and_level.xml
2019-10-09T19:49:17.203Z,1570650557.203 [CommandLine](IMPORTANT): Loaded ./Missions/Science/sci2_flat_and_level.xml
2019-10-09T19:49:24.015Z,1570650564.015 [CommandLine](IMPORTANT): got command set sci2_flat_and_level.Depth 10.000000 meter
2019-10-09T19:49:24.015Z,1570650564.015 [CommandLine](IMPORTANT): got command set sci2_flat_and_level.Lat1 36.703884 degree
2019-10-09T19:49:24.016Z,1570650564.016 [CommandLine](IMPORTANT): got command set sci2_flat_and_level.Lon1 -122.188377 degree
2019-10-09T19:49:24.017Z,1570650564.017 [CommandLine](IMPORTANT): got command run 
2019-10-09T19:49:24.022Z,1570650564.022 [CommandLine](IMPORTANT): Running 
2019-10-09T19:49:24.139Z,1570650564.139 [MissionManager](IMPORTANT): Started mission sci2_flat_and_level
2019-10-09T20:15:58.071Z,1570652158.071 [sci2_flat_and_level:Lap:Wpt1:A.Waypoint](IMPORTANT): Reached Waypoint: 36.703883,-122.188382
2019-10-09T20:16:00.887Z,1570652160.887 [MissionManager](IMPORTANT): Started mission Default
2019-10-09T20:16:01.274Z,1570652161.274 [WetLabsBB2FL](FAULT): LCB fault:  Software Overcurrent.
2019-10-09T20:19:57.165Z,1570652397.165 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=35998, MT Status=1, MTMSN=2583
2019-10-09T20:19:57.755Z,1570652397.755 [CommandLine](IMPORTANT): got command schedule clear
2019-10-09T20:19:57.755Z,1570652397.755 [CommandLine](IMPORTANT): #Cleared scheduled commands:0
2019-10-09T20:19:57.755Z,1570652397.755 [CommandLine](IMPORTANT): got command schedule resume
2019-10-09T20:20:52.252Z,1570652452.252 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=35999, MT Status=1, MTMSN=2584
2019-10-09T20:20:53.008Z,1570652453.008 [CommandLine](IMPORTANT): got command schedule "load Science/smear_yoyo_sampling.xml;set Smear.NumESPSamplers 2 count;set Smear.MissionTimeout 4 hour;set Smear.MaxWaitNoFiring 2.5 hour;set Smear.SpeedSampling 0.75 meter_per_second;set Smear.MaxDepth 295 meter" 41yso 1 2.000000
2019-10-09T20:20:53.009Z,1570652453.009 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=41yso
2019-10-09T20:20:53.010Z,1570652453.010 [CommandLine](IMPORTANT): Scheduled #1 (#1 of 2 with id='41yso'): "load Science/smear_yoyo_sampling.xml;set Smear.NumESPSamplers 2 count;set Smear.MissionTimeout 4 hour;set Smear.MaxWaitNoFiring 2.5 hour;set Smear.SpeedSampling 0.75 meter_per_second;set Smear.MaxDepth 295 meter"
2019-10-09T20:25:37.607Z,1570652737.607 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=36000, MT Status=1, MTMSN=2585
2019-10-09T20:25:38.334Z,1570652738.334 [CommandLine](IMPORTANT): got command schedule "set Smear.ShallowBoundSmear1 25 meter;set Smear.ShallowBoundSmear2 25 meter;set Smear.ThicknessSmear1 5 meter;set Smear.ThicknessSmear2 5 meter;set Smear.Wait1 5 minute;set Smear.Wait2 0 minute;run " 41yso 2 2.000000
2019-10-09T20:25:38.334Z,1570652738.334 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=41yso
2019-10-09T20:25:38.335Z,1570652738.335 [CommandLine](IMPORTANT): Scheduled #2 (#2 of 2 with id='41yso'): "set Smear.ShallowBoundSmear1 25 meter;set Smear.ShallowBoundSmear2 25 meter;set Smear.ThicknessSmear1 5 meter;set Smear.ThicknessSmear2 5 meter;set Smear.Wait1 5 minute;set Smear.Wait2 0 minute;run "
2019-10-09T20:25:38.450Z,1570652738.450 [CommandLine](IMPORTANT): got command load ./Missions/Science/smear_yoyo_sampling.xml
2019-10-09T20:25:50.728Z,1570652750.728 [CommandLine](IMPORTANT): Loaded ./Missions/Science/smear_yoyo_sampling.xml
2019-10-09T20:26:02.287Z,1570652762.287 [CommandLine](IMPORTANT): got command set Smear.NumESPSamplers 2.000000 count
2019-10-09T20:26:02.288Z,1570652762.288 [CommandLine](IMPORTANT): got command set Smear.MissionTimeout 4.000000 hour
2019-10-09T20:26:02.289Z,1570652762.289 [CommandLine](IMPORTANT): got command set Smear.MaxWaitNoFiring 2.500000 hour
2019-10-09T20:26:02.290Z,1570652762.290 [CommandLine](IMPORTANT): got command set Smear.SpeedSampling 0.750000 meter_per_second
2019-10-09T20:26:02.291Z,1570652762.291 [CommandLine](IMPORTANT): got command set Smear.MaxDepth 295.000000 meter
2019-10-09T20:26:14.247Z,1570652774.247 [CommandLine](IMPORTANT): got command set Smear.ShallowBoundSmear1 25.000000 meter
2019-10-09T20:26:14.248Z,1570652774.248 [CommandLine](IMPORTANT): got command set Smear.ShallowBoundSmear2 25.000000 meter
2019-10-09T20:26:14.248Z,1570652774.248 [CommandLine](IMPORTANT): got command set Smear.ThicknessSmear1 5.000000 meter
2019-10-09T20:26:14.249Z,1570652774.249 [CommandLine](IMPORTANT): got command set Smear.ThicknessSmear2 5.000000 meter
2019-10-09T20:26:14.250Z,1570652774.250 [CommandLine](IMPORTANT): got command set Smear.Wait1 5.000000 minute
2019-10-09T20:26:14.323Z,1570652774.323 [CommandLine](IMPORTANT): got command set Smear.Wait2 0.000000 minute
2019-10-09T20:26:14.323Z,1570652774.323 [CommandLine](IMPORTANT): got command run 
2019-10-09T20:26:14.336Z,1570652774.336 [CommandLine](IMPORTANT): Running 
2019-10-09T20:26:14.346Z,1570652774.346 [MissionManager](IMPORTANT): Started mission Smear
2019-10-09T20:26:14.445Z,1570652774.445 [Smear:AbortDrift:B.AbortDrift](IMPORTANT): Acoustic timeout set to: 21.00 hours.
2019-10-09T20:26:15.129Z,1570652775.129 [Smear:TakeSamples:SetOptionsOfSample1:SettingsSample1:C](IMPORTANT): Set YoYoMinDepth to 25.000000 m , YoYoMaxDepth to 30.000000 m .
2019-10-09T20:26:15.130Z,1570652775.130 [Smear:InitializeWithGPSlatlon:C](IMPORTANT): Initialize CenterLatitude and CenterLongitude to GPS fix: 36.704629 arcdeg , -122.190906 arcdeg .
2019-10-09T20:28:44.307Z,1570652924.307 [Smear:Cylinder:CylinderYoYo:A](IMPORTANT): Yoyo profile on a cylinder around location 36.704629 arcdeg , -122.190906 arcdeg , at radius = 20.000000 m .
2019-10-09T20:31:19.861Z,1570653079.861 [Smear:TakeSamples:Firing:B](IMPORTANT): Taking ESP sample No. 1.000000 count .
2019-10-09T20:31:21.072Z,1570653081.072 [Smear:InsertWait:A](IMPORTANT): Wait 5.000000 min before firing sample.
2019-10-09T20:36:23.694Z,1570653383.694 [Smear:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 27.348536 m , 12.228815 degC , nan ug/l .
2019-10-09T20:36:24.852Z,1570653384.852 [ESPComponent](IMPORTANT): Setting regex for ESP Log summary: 'Selecting Cartridge|Sampled|Error|Underpressure|Overpressure|Fail|Retry|Cmd::|Sampler::'
2019-10-09T20:36:25.283Z,1570653385.283 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.5.2:10.89.5.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8
2019-10-09T20:36:25.395Z,1570653385.395 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000)
2019-10-09T20:36:59.990Z,1570653419.990 [ESPComponent](IMPORTANT): ESP has connected as client
2019-10-09T20:37:00.807Z,1570653420.807 [ESPComponent](IMPORTANT): [sample #1] Explicit cartridge argument not given
2019-10-09T20:37:00.807Z,1570653420.807 [ESPComponent](IMPORTANT): [sample #1] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT
2019-10-09T20:37:01.289Z,1570653421.289 [Smear:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete.
2019-10-09T20:37:02.011Z,1570653422.011 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PREPARING_SHOW_LOG
2019-10-09T20:37:02.415Z,1570653422.415 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PREPARING_SHOW_STATUS
2019-10-09T20:37:04.032Z,1570653424.032 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_LOADING_CARTRIDGE
2019-10-09T20:37:36.760Z,1570653456.760 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_WAITING_FOR_PRIMING (@53,archive_bac)
2019-10-09T20:37:38.378Z,1570653458.378 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PRIMING (@100.0)
2019-10-09T20:37:39.183Z,1570653459.183 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_WAITING_FOR_FILTERING (@100.0)
2019-10-09T20:40:05.839Z,1570653605.839 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_FILTERING (@0.0)
2019-10-09T20:40:06.246Z,1570653606.246 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_WAITING_FOR_PAUSED (@0.0)
2019-10-09T21:19:49.963Z,1570655989.963 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PAUSED (@1000.0)
2019-10-09T21:19:50.362Z,1570655990.362 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PROCESSING (@1000.0)
2019-10-09T21:19:52.794Z,1570655992.794 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_WAITING_FOR_PROCESSED (@53,archive_bac)
2019-10-09T21:31:57.171Z,1570656717.171 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_STOPPING (@53,archive_bac)
2019-10-09T21:32:22.624Z,1570656742.624 [ESPComponent](IMPORTANT): Syncing ESP logs with command: rsync -azPq --timeout=60 esp@esp:'/var/log/esp/real /var/log/esp/real.out /var/log/esp/real.slot /var/log/esp/*.spr' /LRAUV/ESPlogs &
2019-10-09T21:32:23.032Z,1570656743.032 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_STOPPED
2019-10-09T21:37:22.803Z,1570657042.803 [ESPComponent](IMPORTANT): [sample #1] ESP sampling sequence completed normally.
2019-10-09T21:37:23.204Z,1570657043.204 [ESPComponent](IMPORTANT): [sample #1] ESP log summary report (2 messages):
@13:37:13.82 Selecting Cartridge 53
@14:19:44.40 Sampled  1000.0ml

2019-10-09T21:37:23.684Z,1570657043.684 [Smear:TakeSamples:Firing:G](IMPORTANT): ESP sample No. 1.000000 count completed.
2019-10-09T21:37:26.123Z,1570657046.123 [Smear:TakeSamples:SetOptionsOfSample2:SettingsSample2:C](IMPORTANT): Set YoYoMinDepth to 25.000000 m , YoYoMaxDepth to 30.000000 m .
2019-10-09T21:37:35.396Z,1570657055.396 [Smear:TakeSamples:Firing:B](IMPORTANT): Taking ESP sample No. 2.000000 count .
2019-10-09T21:37:36.617Z,1570657056.617 [Smear:InsertWait:A](IMPORTANT): Wait 0.000000 min before firing sample.
2019-10-09T21:37:39.073Z,1570657059.073 [Smear:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 25.472477 m , 12.375208 degC , nan ug/l .
2019-10-09T21:37:40.702Z,1570657060.702 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.5.2:10.89.5.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8
2019-10-09T21:37:40.803Z,1570657060.803 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000)
2019-10-09T21:38:15.853Z,1570657095.853 [ESPComponent](IMPORTANT): ESP has connected as client
2019-10-09T21:38:16.663Z,1570657096.663 [ESPComponent](IMPORTANT): [sample #2] Explicit cartridge argument not given
2019-10-09T21:38:16.664Z,1570657096.664 [ESPComponent](IMPORTANT): [sample #2] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT
2019-10-09T21:38:17.130Z,1570657097.130 [Smear:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete.
2019-10-09T21:38:17.467Z,1570657097.467 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PREPARING_SHOW_LOG
2019-10-09T21:38:17.873Z,1570657097.873 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PREPARING_SHOW_STATUS
2019-10-09T21:38:19.899Z,1570657099.899 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_LOADING_CARTRIDGE
2019-10-09T21:38:52.623Z,1570657132.623 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_WAITING_FOR_PRIMING (@52,archive_bac)
2019-10-09T21:38:54.236Z,1570657134.236 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PRIMING (@100.0)
2019-10-09T21:38:55.043Z,1570657135.043 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_WAITING_FOR_FILTERING (@100.0)
2019-10-09T21:41:21.295Z,1570657281.295 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_FILTERING (@0.0)
2019-10-09T21:41:21.702Z,1570657281.702 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_WAITING_FOR_PAUSED (@0.0)
2019-10-09T21:50:42.136Z,1570657842.136 [BPC1](FAULT): Battery stick #38 (s/n: 0139) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2019-10-09T21:50:42.137Z,1570657842.137 [BPC1](FAULT): Battery stick #39 (s/n: 00F0) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2019-10-09T22:36:11.677Z,1570660571.677 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PAUSED (@1000.0)
2019-10-09T22:36:12.079Z,1570660572.079 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PROCESSING (@1000.0)
2019-10-09T22:36:15.317Z,1570660575.317 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_WAITING_FOR_PROCESSED (@52,archive_bac)
2019-10-09T22:48:18.931Z,1570661298.931 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_STOPPING (@52,archive_bac)
2019-10-09T22:48:44.384Z,1570661324.384 [ESPComponent](IMPORTANT): Syncing ESP logs with command: rsync -azPq --timeout=60 esp@esp:'/var/log/esp/real /var/log/esp/real.out /var/log/esp/real.slot /var/log/esp/*.spr' /LRAUV/ESPlogs &
2019-10-09T22:48:44.794Z,1570661324.794 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_STOPPED
2019-10-09T22:53:44.582Z,1570661624.582 [ESPComponent](IMPORTANT): [sample #2] ESP sampling sequence completed normally.
2019-10-09T22:53:44.985Z,1570661624.985 [ESPComponent](IMPORTANT): [sample #2] ESP log summary report (2 messages):
@14:38:29.23 Selecting Cartridge 52
@15:36:04.38 Sampled  1000.0ml

2019-10-09T22:53:45.445Z,1570661625.445 [Smear:TakeSamples:Firing:G](IMPORTANT): ESP sample No. 2.000000 count completed.
2019-10-09T22:53:47.051Z,1570661627.051 [Smear:MissionCompleted:A](IMPORTANT): Completed sampling. Stopping mission.
2019-10-09T22:53:47.518Z,1570661627.518 [CommandLine](IMPORTANT): got command stop
2019-10-09T22:53:47.518Z,1570661627.518 [CommandLine](IMPORTANT): Scheduling is paused
2019-10-09T22:53:48.537Z,1570661628.537 [MissionManager](IMPORTANT): Started mission Default
2019-10-09T22:53:49.230Z,1570661629.230 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout
2019-10-09T23:12:56.217Z,1570662776.217 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 19.121450 min 
2019-10-09T23:12:57.810Z,1570662777.810 [NAL9602](FAULT): GPS failed to acquire within timeout.
2019-10-09T23:22:48.184Z,1570663368.184 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 28.987321 min 
2019-10-09T23:25:08.208Z,1570663508.208 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=36036, MT Status=1, MTMSN=2586
2019-10-09T23:25:08.933Z,1570663508.933 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml
2019-10-09T23:25:10.456Z,1570663510.456 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml
2019-10-09T23:25:19.551Z,1570663519.551 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 16.000000 hour
2019-10-09T23:25:19.552Z,1570663519.552 [CommandLine](IMPORTANT): got command set profile_station.Lat 36.797001 degree
2019-10-09T23:25:19.553Z,1570663519.553 [CommandLine](IMPORTANT): got command set profile_station.Lon -121.847000 degree
2019-10-09T23:25:19.554Z,1570663519.554 [CommandLine](IMPORTANT): got command set profile_station.YoYoMaxDepth 50.000000 meter
2019-10-09T23:25:19.554Z,1570663519.554 [CommandLine](IMPORTANT): got command run 
2019-10-09T23:25:19.557Z,1570663519.557 [CommandLine](IMPORTANT): Running 
2019-10-09T23:25:19.630Z,1570663519.630 [MissionManager](IMPORTANT): Started mission profile_station
2019-10-09T23:25:20.490Z,1570663520.490 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout
2019-10-10T01:29:01.858Z,1570670941.858 [CBIT](IMPORTANT): Beginning ground fault scan
2019-10-10T01:29:12.888Z,1570670952.888 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.027230
CHAN A1 (24V): -0.018730
CHAN A2 (12V): -0.005257
CHAN A3 (5V): -0.003625
CHAN B0 (3.3V): -0.001407
CHAN B1 (3.15aV): -0.002161
CHAN B2 (3.15bV): -0.001102
CHAN B3 (GND): 0.001006
OPEN: 0.012286
Full Scale Calc: 4.765 mA, -1.589 mA
2019-10-10T03:09:16.767Z,1570676956.767 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2019-10-10T03:30:12.941Z,1570678212.941 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=36067, MT Status=1, MTMSN=2587
2019-10-10T03:30:13.447Z,1570678213.447 [CommandLine](IMPORTANT): got command stop
2019-10-10T03:30:13.786Z,1570678213.786 [MissionManager](IMPORTANT): Started mission Default
2019-10-10T03:33:00.205Z,1570678380.205 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=36068, MT Status=1, MTMSN=2588
2019-10-10T03:33:00.906Z,1570678380.906 [CommandLine](IMPORTANT): got command configSet DVL_micro.loadAtStartup 1.000000 bool persist
2019-10-10T03:33:00.911Z,1570678380.911 [CommandLine](IMPORTANT): configSet DVL_micro.loadAtStartup requires a restart to take effect.
2019-10-10T03:35:57.001Z,1570678557.001 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=36069, MT Status=1, MTMSN=2589
2019-10-10T03:35:57.563Z,1570678557.563 [CommandLine](IMPORTANT): got command restart application