2018-08-23T16:23:46.848Z,1535041426.848 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg 2018-08-23T16:23:51.416Z,1535041431.416 [SBIT](IMPORTANT): git: 2018-08-02-21-g63d70fd 2018-08-23T16:23:51.417Z,1535041431.417 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2018-08-23T16:24:12.074Z,1535041452.074 [SBIT](IMPORTANT): Beginning Startup BIT 2018-08-23T16:24:12.110Z,1535041452.110 [CBIT](IMPORTANT): Beginning ground fault scan 2018-08-23T16:24:23.698Z,1535041463.698 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.004647 CHAN A1 (24V): -0.012843 CHAN A2 (12V): -0.006273 CHAN A3 (5V): -0.008613 CHAN B0 (3.3V): -0.003901 CHAN B1 (3.15aV): -0.002880 CHAN B2 (3.15bV): -0.000926 CHAN B3 (GND): -0.004609 OPEN: 0.011992 Full Scale Calc: 4.765 mA, -1.589 mA 2018-08-23T16:25:06.141Z,1535041506.141 [SBIT](IMPORTANT): SBIT PASSED 2018-08-23T16:25:06.243Z,1535041506.243 [CommandLine](IMPORTANT): got command configSet list 2018-08-23T16:25:06.243Z,1535041506.243 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2018-08-23T16:25:06.244Z,1535041506.244 [CommandLine](IMPORTANT): AcousticModem_Benthos_ATM900.loadAtStartup=0 bool; 2018-08-23T16:25:06.245Z,1535041506.245 [CommandLine](IMPORTANT): CTD_Seabird.minSalinityBound=0.1 practical_salinity_unit; 2018-08-23T16:25:06.245Z,1535041506.245 [CommandLine](IMPORTANT): Depth_Keller.offset=-0.56 decibar; 2018-08-23T16:25:06.245Z,1535041506.245 [CommandLine](IMPORTANT): Express linearApproximation mass_concentration_of_chlorophyll_in_sea_water 1.000000 microgram_per_liter; 2018-08-23T16:25:06.245Z,1535041506.245 [CommandLine](IMPORTANT): IBIT.batteryHibernationTimeout=1 minute; 2018-08-23T16:25:06.245Z,1535041506.245 [CommandLine](IMPORTANT): IBIT.batteryMissingStickThreshold=12 count; 2018-08-23T16:25:06.246Z,1535041506.246 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=200 cubic_centimeter; 2018-08-23T16:25:06.246Z,1535041506.246 [CommandLine](IMPORTANT): VerticalControl.massDefault=0 centimeter; 2018-08-23T16:25:06.552Z,1535041506.552 [MissionManager](IMPORTANT): Started mission Startup 2018-08-23T16:26:10.076Z,1535041570.076 [MissionManager](IMPORTANT): Started mission Default 2018-08-23T16:28:08.332Z,1535041688.332 [DataOverHttps](IMPORTANT): Could not stat file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:28:08.333Z,1535041688.333 [DataOverHttps](CRITICAL): Could not open file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:28:08.493Z,1535041688.493 [CommandLine](FAULT): Scheduling is paused 2018-08-23T16:28:15.615Z,1535041695.615 [DataOverHttps](IMPORTANT): Could not stat file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:28:15.615Z,1535041695.615 [DataOverHttps](CRITICAL): Could not open file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:29:14.487Z,1535041754.487 [DataOverHttps](IMPORTANT): Could not stat file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:29:14.488Z,1535041754.488 [DataOverHttps](CRITICAL): Could not open file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:30:16.630Z,1535041816.630 [DataOverHttps](IMPORTANT): Could not stat file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:30:16.630Z,1535041816.630 [DataOverHttps](CRITICAL): Could not open file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:30:41.867Z,1535041841.867 [CommandLine](IMPORTANT): got command report touch height_above_sea_floor 2018-08-23T16:31:14.843Z,1535041874.843 [DataOverHttps](IMPORTANT): Could not stat file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:31:14.844Z,1535041874.844 [DataOverHttps](CRITICAL): Could not open file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:32:16.140Z,1535041936.140 [DataOverHttps](IMPORTANT): Could not stat file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:32:16.140Z,1535041936.140 [DataOverHttps](CRITICAL): Could not open file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:33:03.396Z,1535041983.396 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 6.883425 min 2018-08-23T16:33:15.877Z,1535041995.877 [DataOverHttps](IMPORTANT): Could not stat file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:33:15.878Z,1535041995.878 [DataOverHttps](CRITICAL): Could not open file Logs/20180823T162341/Express0001.lzma 2018-08-23T16:37:38.358Z,1535042258.358 [CommandLine](IMPORTANT): got command get depth 2018-08-23T16:37:38.359Z,1535042258.359 [CommandLine](IMPORTANT): depth 0.023924 m 2018-08-23T16:37:44.408Z,1535042264.408 [CommandLine](IMPORTANT): got command report clear 2018-08-23T16:37:56.767Z,1535042276.767 [CommandLine](IMPORTANT): got command get Depth_Keller.offset 2018-08-23T16:37:56.768Z,1535042276.768 [CommandLine](IMPORTANT): Depth_Keller.offset -0.560000 db 2018-08-23T16:39:23.850Z,1535042363.850 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 13.222720 min 2018-08-23T16:41:42.967Z,1535042502.967 [CommandLine](IMPORTANT): got command report touch height_above_sea_floor 2018-08-23T16:43:28.040Z,1535042608.040 [CommandLine](IMPORTANT): got command report clear 2018-08-23T16:44:52.712Z,1535042692.712 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks. 2018-08-23T16:45:31.582Z,1535042731.582 [CommandLine](IMPORTANT): got command configSet Rowe_600LCM.loadAtStartup 0.000000 bool 2018-08-23T16:45:31.582Z,1535042731.582 [CommandLine](FAULT): configSet Rowe_600LCM.loadAtStartup without persist will have no effect. 2018-08-23T16:45:31.838Z,1535042731.838 [Rowe_600LCM](IMPORTANT): Stopping now due to load at startup. No immediate restart required. 2018-08-23T16:45:32.557Z,1535042732.557 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-23T16:45:33.929Z,1535042733.929 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 19.390774 min 2018-08-23T16:45:38.066Z,1535042738.066 [Rowe_600LCM](IMPORTANT): Stopping now due to load at startup. No immediate restart required. 2018-08-23T16:45:52.106Z,1535042752.106 [CommandLine](IMPORTANT): got command report touch height_above_sea_floor 2018-08-23T16:46:06.941Z,1535042766.941 [CommandLine](IMPORTANT): got command configSet Rowe_600LCM.loadAtStartup 1.000000 bool 2018-08-23T16:46:06.941Z,1535042766.941 [CommandLine](FAULT): configSet Rowe_600LCM.loadAtStartup without persist will have no effect. 2018-08-23T16:46:25.767Z,1535042785.767 [CommandLine](IMPORTANT): got command report clear 2018-08-23T16:51:41.062Z,1535043101.062 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 25.448846 min 2018-08-23T16:57:41.531Z,1535043461.531 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.517525 min 2018-08-23T16:59:16.214Z,1535043556.214 [CommandLine](IMPORTANT): got command show variable massDefault 2018-08-23T16:59:16.268Z,1535043556.268 [CommandLine](IMPORTANT): VerticalControl.massDefault (centimeter) 2018-08-23T16:59:26.551Z,1535043566.551 [CommandLine](IMPORTANT): got command get VerticalControl.massDefault 2018-08-23T16:59:26.552Z,1535043566.552 [CommandLine](IMPORTANT): VerticalControl.massDefault 0.000000 cm 2018-08-23T17:00:43.259Z,1535043643.259 [DataOverHttps](IMPORTANT): SBD MTMSN=20180823T170029 2018-08-23T17:00:48.839Z,1535043648.839 [CommandLine](IMPORTANT): got command configSet VerticalControl.massDefault -1.000000 centimeter persist 2018-08-23T17:03:38.416Z,1535043818.416 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 37.465361 min 2018-08-23T17:06:38.772Z,1535043998.772 [DataOverHttps](IMPORTANT): SBD MTMSN=20180823T170624 2018-08-23T17:06:44.134Z,1535044004.134 [CommandLine](IMPORTANT): got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 2 hour;set profile_station.NeedCommsTime 20 minute;set profile_station.Lat 41.85 degree;set profile_station.Lon -83.1935 degree" 3fjhp 1 3.000000 2018-08-23T17:06:44.135Z,1535044004.135 [CommandLine](IMPORTANT): Scheduling command #1 of 3 with id=3fjhp 2018-08-23T17:06:44.136Z,1535044004.136 [CommandLine](IMPORTANT): Scheduled #1 (#1 of 3 with id='3fjhp'): "load Science/profile_station.xml;set profile_station.MissionTimeout 2 hour;set profile_station.NeedCommsTime 20 minute;set profile_station.Lat 41.85 degree;set profile_station.Lon -83.1935 degree" ASAP 2018-08-23T17:06:44.860Z,1535044004.860 [DataOverHttps](IMPORTANT): SBD MTMSN=20180823T170630 2018-08-23T17:06:50.246Z,1535044010.246 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.Radius 200 meter;set profile_station.YoYoMinDepth 2.5 meter;set profile_station.YoYoMaxDepth 2.5 meter;set profile_station.YoYoMinAltitude 1 meter;set profile_station.MinAltitude .7 meter" 3fjhp 2 3.000000 2018-08-23T17:06:50.247Z,1535044010.247 [CommandLine](IMPORTANT): Scheduling command #2 of 3 with id=3fjhp 2018-08-23T17:06:50.248Z,1535044010.248 [CommandLine](IMPORTANT): Scheduled #2 (#2 of 3 with id='3fjhp'): "set profile_station.Radius 200 meter;set profile_station.YoYoMinDepth 2.5 meter;set profile_station.YoYoMaxDepth 2.5 meter;set profile_station.YoYoMinAltitude 1 meter;set profile_station.MinAltitude .7 meter" ASAP 2018-08-23T17:06:50.991Z,1535044010.991 [DataOverHttps](IMPORTANT): SBD MTMSN=20180823T170636 2018-08-23T17:06:55.745Z,1535044015.745 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.MaxDepth 4 meter;run " 3fjhp 3 3.000000 2018-08-23T17:06:55.746Z,1535044015.746 [CommandLine](IMPORTANT): Scheduling command #3 of 3 with id=3fjhp 2018-08-23T17:06:55.748Z,1535044015.748 [CommandLine](IMPORTANT): Scheduled #3 (#3 of 3 with id='3fjhp'): "set profile_station.MaxDepth 4 meter;run " ASAP 2018-08-23T17:06:55.877Z,1535044015.877 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml 2018-08-23T17:06:56.480Z,1535044016.480 [DataOverHttps](IMPORTANT): SBD MTMSN=20180823T170641 2018-08-23T17:06:59.680Z,1535044019.680 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml 2018-08-23T17:07:13.354Z,1535044033.354 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 2.000000 hour 2018-08-23T17:07:13.355Z,1535044033.355 [CommandLine](IMPORTANT): got command set profile_station.NeedCommsTime 20.000000 minute 2018-08-23T17:07:13.356Z,1535044033.356 [CommandLine](IMPORTANT): got command set profile_station.Lat 41.849998 degree 2018-08-23T17:07:13.357Z,1535044033.357 [CommandLine](IMPORTANT): got command set profile_station.Lon -83.193497 degree 2018-08-23T17:07:13.366Z,1535044033.366 [CommandLine](IMPORTANT): got command stop 2018-08-23T17:07:13.370Z,1535044033.370 [CommandLine](IMPORTANT): Scheduling is paused for 2 commands 2018-08-23T17:07:28.866Z,1535044048.866 [CommandLine](IMPORTANT): got command set profile_station.Radius 200.000000 meter 2018-08-23T17:07:28.867Z,1535044048.867 [CommandLine](IMPORTANT): got command set profile_station.YoYoMinDepth 2.500000 meter 2018-08-23T17:07:28.868Z,1535044048.868 [CommandLine](IMPORTANT): got command set profile_station.YoYoMaxDepth 2.500000 meter 2018-08-23T17:07:28.873Z,1535044048.873 [CommandLine](IMPORTANT): got command set profile_station.YoYoMinAltitude 1.000000 meter 2018-08-23T17:07:28.873Z,1535044048.873 [CommandLine](IMPORTANT): got command set profile_station.MinAltitude 0.700000 meter 2018-08-23T17:07:33.369Z,1535044053.369 [CommandLine](IMPORTANT): got command set profile_station.MaxDepth 4.000000 meter 2018-08-23T17:07:33.370Z,1535044053.370 [CommandLine](IMPORTANT): got command run 2018-08-23T17:07:33.372Z,1535044053.372 [CommandLine](IMPORTANT): Running 2018-08-23T17:07:33.607Z,1535044053.607 [MissionManager](IMPORTANT): Started mission profile_station 2018-08-23T17:07:34.006Z,1535044054.006 [MissionManager](IMPORTANT): Started mission Default 2018-08-23T17:07:34.729Z,1535044054.729 [ThrusterServo](FAULT): getVelocity uart error serial timeout 2018-08-23T17:07:34.729Z,1535044054.729 [ThrusterServo](FAULT): Thruster uart error: serial timeout 2018-08-23T17:07:57.058Z,1535044077.058 [CommandLine](IMPORTANT): got command get depth 2018-08-23T17:07:57.059Z,1535044077.059 [CommandLine](IMPORTANT): depth 0.013608 m 2018-08-23T17:09:06.926Z,1535044146.926 [CommandLine](IMPORTANT): got command restart application