2016-07-28T21:45:45.776Z,1469742345.776 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg 2016-07-28T21:45:52.656Z,1469742352.656 [SBIT](IMPORTANT): git: 2015-11-13-11-g036008f 2016-07-28T21:45:52.657Z,1469742352.657 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2016-07-28T21:45:52.657Z,1469742352.657 [SBIT](IMPORTANT): Kernel Version:#639 PREEMPT Wed Mar 12 12:53:33 PDT 2014 2016-07-28T21:45:52.659Z,1469742352.659 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL. 2016-07-28T21:45:52.659Z,1469742352.659 [CBIT](CRITICAL): LAST REBOOT DUE TO WATCHDOG TIMER RESET. 2016-07-28T21:45:54.202Z,1469742354.202 [CommandLine](FAULT): Scheduling is paused 2016-07-28T21:45:55.071Z,1469742355.071 [BuoyancyServo](FAULT): Buoyancy failed to initialize 2016-07-28T21:46:06.121Z,1469742366.121 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:46:20.509Z,1469742380.509 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:46:34.946Z,1469742394.946 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:46:48.921Z,1469742408.921 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:46:56.167Z,1469742416.167 [SBIT](IMPORTANT): Beginning Startup BIT 2016-07-28T21:46:56.169Z,1469742416.169 [CBIT](IMPORTANT): Beginning GF scan 2016-07-28T21:47:12.007Z,1469742432.007 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-28T21:47:12.170Z,1469742432.170 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T21:47:22.446Z,1469742442.446 [CBIT](IMPORTANT): No ground fault detected 2016-07-28T21:47:50.215Z,1469742470.215 [SBIT](IMPORTANT): SBIT PASSED 2016-07-28T21:47:50.628Z,1469742470.628 [MissionManager](IMPORTANT): Started mission Startup 2016-07-28T21:47:52.990Z,1469742472.990 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T21:47:52.992Z,1469742472.992 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T21:47:53.573Z,1469742473.573 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T21:49:29.633Z,1469742569.633 [MissionManager](IMPORTANT): Started mission Default 2016-07-28T21:49:54.141Z,1469742594.141 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T21:49:54.143Z,1469742594.143 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T21:49:56.360Z,1469742596.360 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T21:51:08.578Z,1469742668.578 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2016-07-28T21:51:55.154Z,1469742715.154 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T21:51:55.156Z,1469742715.156 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T21:51:58.509Z,1469742718.509 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T21:52:25.137Z,1469742745.137 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:52:39.217Z,1469742759.217 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:52:53.598Z,1469742773.598 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:53:08.001Z,1469742788.001 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:53:22.398Z,1469742802.398 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:53:22.450Z,1469742802.450 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T21:53:56.120Z,1469742836.120 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T21:53:56.122Z,1469742836.122 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T21:54:00.566Z,1469742840.566 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T21:55:57.073Z,1469742957.073 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T21:55:57.075Z,1469742957.075 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T21:56:03.369Z,1469742963.369 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T21:56:03.471Z,1469742963.471 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-28T21:56:07.029Z,1469742967.029 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-28T21:57:58.067Z,1469743078.067 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T21:57:58.069Z,1469743078.069 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T21:58:34.991Z,1469743114.991 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:58:49.376Z,1469743129.376 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:59:03.773Z,1469743143.773 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:59:17.894Z,1469743157.894 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:59:32.288Z,1469743172.288 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T21:59:32.307Z,1469743172.307 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T21:59:59.084Z,1469743199.084 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T21:59:59.086Z,1469743199.086 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:00:08.305Z,1469743208.305 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.637278 min 2016-07-28T22:02:00.039Z,1469743320.039 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:02:00.041Z,1469743320.041 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:04:01.113Z,1469743441.113 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:04:01.115Z,1469743441.115 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:04:45.221Z,1469743485.221 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:04:59.623Z,1469743499.623 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:05:14.931Z,1469743514.931 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:05:33.548Z,1469743533.548 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:05:47.574Z,1469743547.574 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:05:47.593Z,1469743547.593 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T22:06:01.982Z,1469743561.982 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:06:01.984Z,1469743561.984 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:06:25.952Z,1469743585.952 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-28T22:08:03.037Z,1469743683.037 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:08:03.039Z,1469743683.039 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:08:03.598Z,1469743683.598 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:10:04.141Z,1469743804.141 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:10:04.143Z,1469743804.143 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:10:06.388Z,1469743806.388 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:10:26.620Z,1469743826.620 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.941892 min 2016-07-28T22:11:00.259Z,1469743860.259 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:11:14.633Z,1469743874.633 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:11:29.892Z,1469743889.892 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:11:44.001Z,1469743904.001 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:11:58.395Z,1469743918.395 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:11:58.450Z,1469743918.450 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T22:12:05.201Z,1469743925.201 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:12:05.203Z,1469743925.203 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:12:08.433Z,1469743928.433 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:14:06.245Z,1469744046.245 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:14:06.246Z,1469744046.246 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:14:11.223Z,1469744051.223 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:16:07.193Z,1469744167.193 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:16:07.195Z,1469744167.195 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:16:13.257Z,1469744173.257 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:16:13.615Z,1469744173.615 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-28T22:16:49.714Z,1469744209.714 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-28T22:17:12.559Z,1469744232.559 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-28T22:17:28.127Z,1469744248.127 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-28T22:17:42.524Z,1469744262.524 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:17:59.066Z,1469744279.066 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:18:08.305Z,1469744288.305 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:18:08.307Z,1469744288.307 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:18:13.467Z,1469744293.467 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:18:13.486Z,1469744293.486 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T22:20:09.266Z,1469744409.266 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:20:09.268Z,1469744409.268 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:20:44.874Z,1469744444.874 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.247727 min 2016-07-28T22:22:10.308Z,1469744530.308 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:22:10.310Z,1469744530.310 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:23:26.408Z,1469744606.408 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:23:40.815Z,1469744620.815 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:23:54.891Z,1469744634.891 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:24:08.885Z,1469744648.885 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:24:11.327Z,1469744651.327 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:24:11.329Z,1469744651.329 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:24:22.888Z,1469744662.888 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:24:22.908Z,1469744662.908 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T22:26:12.122Z,1469744772.122 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:26:12.123Z,1469744772.123 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:27:07.461Z,1469744827.461 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-28T22:28:13.253Z,1469744893.253 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:28:13.255Z,1469744893.255 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:28:13.586Z,1469744893.586 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:29:35.319Z,1469744975.319 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:29:49.711Z,1469744989.711 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:30:06.767Z,1469745006.767 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:30:14.434Z,1469745014.434 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:30:14.436Z,1469745014.436 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:30:15.679Z,1469745015.679 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:30:20.445Z,1469745020.445 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:30:34.813Z,1469745034.813 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:30:34.856Z,1469745034.856 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T22:31:03.272Z,1469745063.272 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.553703 min 2016-07-28T22:32:15.434Z,1469745135.434 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:32:15.436Z,1469745135.436 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:32:18.477Z,1469745138.477 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:34:16.421Z,1469745256.421 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:34:16.423Z,1469745256.423 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:34:20.507Z,1469745260.507 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:35:47.761Z,1469745347.761 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:36:01.791Z,1469745361.791 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:36:18.092Z,1469745378.092 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:36:18.094Z,1469745378.094 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:36:18.556Z,1469745378.556 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:36:22.523Z,1469745382.523 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:36:23.731Z,1469745383.731 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-28T22:36:35.775Z,1469745395.775 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:36:50.154Z,1469745410.154 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:36:50.201Z,1469745410.201 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T22:37:26.312Z,1469745446.312 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-28T22:37:26.380Z,1469745446.380 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-28T22:38:18.724Z,1469745498.724 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:38:18.726Z,1469745498.726 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:40:19.705Z,1469745619.705 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:40:19.707Z,1469745619.707 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:41:21.426Z,1469745681.426 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 51.856140 min 2016-07-28T22:42:02.779Z,1469745722.779 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:42:17.188Z,1469745737.188 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:42:20.805Z,1469745740.805 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:42:20.807Z,1469745740.807 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:42:31.246Z,1469745751.246 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:42:45.630Z,1469745765.630 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:43:00.023Z,1469745780.023 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:43:00.041Z,1469745780.041 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T22:44:21.792Z,1469745861.792 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:44:21.794Z,1469745861.794 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:46:25.658Z,1469745985.658 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:46:25.660Z,1469745985.660 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:48:12.475Z,1469746092.475 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:48:26.097Z,1469746106.097 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:48:26.483Z,1469746106.483 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:48:26.484Z,1469746106.484 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:48:26.850Z,1469746106.850 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:48:42.871Z,1469746122.871 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:48:57.012Z,1469746137.012 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:49:11.413Z,1469746151.413 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:49:11.526Z,1469746151.526 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T22:49:39.401Z,1469746179.401 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-28T22:50:27.519Z,1469746227.519 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:50:27.520Z,1469746227.520 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:50:29.289Z,1469746229.289 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:51:39.982Z,1469746299.982 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.165751 min 2016-07-28T22:52:28.479Z,1469746348.479 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:52:28.481Z,1469746348.481 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:52:31.330Z,1469746351.330 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:54:24.217Z,1469746464.217 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:54:29.426Z,1469746469.426 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:54:29.428Z,1469746469.428 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:54:33.351Z,1469746473.351 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:54:38.638Z,1469746478.638 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:54:55.540Z,1469746495.540 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:55:09.910Z,1469746509.910 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:55:24.307Z,1469746524.307 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T22:55:24.327Z,1469746524.327 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T22:56:30.450Z,1469746590.450 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:56:30.452Z,1469746590.452 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:56:35.472Z,1469746595.472 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T22:56:35.701Z,1469746595.701 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-28T22:58:31.362Z,1469746711.362 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:58:31.364Z,1469746711.364 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T22:59:57.380Z,1469746797.380 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-28T23:00:32.445Z,1469746832.445 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:00:32.447Z,1469746832.447 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:00:37.258Z,1469746837.258 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:00:51.259Z,1469746851.259 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:01:05.386Z,1469746865.386 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:01:19.804Z,1469746879.804 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:01:33.798Z,1469746893.798 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:01:33.817Z,1469746893.817 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T23:01:58.204Z,1469746918.204 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.469694 min 2016-07-28T23:02:33.470Z,1469746953.470 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:02:33.472Z,1469746953.472 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:04:34.423Z,1469747074.423 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:04:34.425Z,1469747074.425 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:06:35.365Z,1469747195.365 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:06:35.366Z,1469747195.366 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:06:47.779Z,1469747207.779 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-28T23:07:01.791Z,1469747221.791 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:07:19.742Z,1469747239.742 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:07:33.743Z,1469747253.743 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:07:48.142Z,1469747268.142 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:07:48.161Z,1469747268.161 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T23:08:36.210Z,1469747316.210 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:08:36.212Z,1469747316.212 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:08:36.238Z,1469747316.238 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:10:19.089Z,1469747419.089 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-28T23:10:37.222Z,1469747437.222 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:10:37.224Z,1469747437.224 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:10:39.068Z,1469747439.068 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:12:16.089Z,1469747536.089 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 82.768018 min 2016-07-28T23:12:38.254Z,1469747558.254 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:12:38.255Z,1469747558.255 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:12:41.125Z,1469747561.125 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:13:01.037Z,1469747581.037 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:13:15.426Z,1469747595.426 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:13:32.355Z,1469747612.355 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:13:46.734Z,1469747626.734 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:14:01.136Z,1469747641.136 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:14:01.182Z,1469747641.182 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T23:14:39.270Z,1469747679.270 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:14:39.271Z,1469747679.271 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:14:43.924Z,1469747683.924 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:16:40.352Z,1469747800.352 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:16:40.354Z,1469747800.354 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:16:46.165Z,1469747806.165 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:16:46.395Z,1469747806.395 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-28T23:18:41.208Z,1469747921.208 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:18:41.210Z,1469747921.210 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:19:13.997Z,1469747953.997 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:19:28.394Z,1469747968.394 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:19:42.568Z,1469747982.568 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:19:57.012Z,1469747997.012 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:20:11.362Z,1469748011.362 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:20:11.419Z,1469748011.419 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T23:20:37.351Z,1469748037.351 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-28T23:20:42.216Z,1469748042.216 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:20:42.218Z,1469748042.218 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:22:34.294Z,1469748154.294 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 93.071118 min 2016-07-28T23:22:43.178Z,1469748163.178 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:22:43.180Z,1469748163.180 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:24:44.207Z,1469748284.207 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:24:44.209Z,1469748284.209 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:25:24.203Z,1469748324.203 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:25:38.349Z,1469748338.349 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:25:52.729Z,1469748352.729 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:26:07.138Z,1469748367.138 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:26:21.528Z,1469748381.528 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:26:21.572Z,1469748381.572 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T23:26:45.275Z,1469748405.275 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:26:45.278Z,1469748405.278 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:28:46.459Z,1469748526.459 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:28:46.460Z,1469748526.460 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:28:46.927Z,1469748526.927 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:30:47.334Z,1469748647.334 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:30:47.336Z,1469748647.336 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:30:49.036Z,1469748649.036 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:30:55.651Z,1469748655.651 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-28T23:30:55.703Z,1469748655.703 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-28T23:31:34.529Z,1469748694.529 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:31:48.928Z,1469748708.928 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:32:05.846Z,1469748725.846 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:32:20.241Z,1469748740.241 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:32:34.641Z,1469748754.641 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:32:34.659Z,1469748754.659 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T23:32:48.246Z,1469748768.246 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:32:48.247Z,1469748768.247 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:32:51.137Z,1469748771.137 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:32:52.660Z,1469748772.660 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.377035 min 2016-07-28T23:34:49.245Z,1469748889.245 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:34:49.247Z,1469748889.247 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:34:56.740Z,1469748896.740 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:36:50.236Z,1469749010.236 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:36:50.238Z,1469749010.238 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:36:59.013Z,1469749019.013 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:36:59.116Z,1469749019.116 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-28T23:37:47.499Z,1469749067.499 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:38:02.746Z,1469749082.746 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-28T23:38:24.384Z,1469749104.384 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-28T23:38:38.771Z,1469749118.771 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:38:51.169Z,1469749131.169 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:38:51.170Z,1469749131.170 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:38:52.805Z,1469749132.805 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:38:52.824Z,1469749132.824 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T23:40:52.226Z,1469749252.226 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:40:52.228Z,1469749252.228 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:42:53.163Z,1469749373.163 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:42:53.165Z,1469749373.165 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:43:09.139Z,1469749389.139 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-28T23:43:10.762Z,1469749390.762 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 113.678735 min 2016-07-28T23:44:05.658Z,1469749445.658 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:44:19.753Z,1469749459.753 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:44:34.154Z,1469749474.154 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:44:48.556Z,1469749488.556 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:44:54.220Z,1469749494.220 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:44:54.227Z,1469749494.227 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:45:02.574Z,1469749502.574 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:45:02.627Z,1469749502.627 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T23:46:55.267Z,1469749615.267 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:46:55.268Z,1469749615.268 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:48:56.068Z,1469749736.068 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:48:56.475Z,1469749736.475 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:49:00.480Z,1469749740.480 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:50:15.459Z,1469749815.459 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:50:31.878Z,1469749831.878 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:50:45.941Z,1469749845.941 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:50:57.151Z,1469749857.151 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:50:57.555Z,1469749857.555 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:51:00.351Z,1469749860.351 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:51:02.521Z,1469749862.521 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:51:14.752Z,1469749874.752 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:51:14.772Z,1469749874.772 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T23:52:58.185Z,1469749978.185 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:52:58.584Z,1469749978.584 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:53:05.328Z,1469749985.328 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:53:28.988Z,1469750008.988 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 123.982495 min 2016-07-28T23:53:32.196Z,1469750012.196 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-28T23:54:59.230Z,1469750099.230 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:54:59.610Z,1469750099.610 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:55:07.433Z,1469750107.433 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:56:27.380Z,1469750187.380 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:56:43.910Z,1469750203.910 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:56:58.291Z,1469750218.291 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:57:00.358Z,1469750220.358 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:57:00.730Z,1469750220.730 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:57:09.462Z,1469750229.462 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-28T23:57:09.529Z,1469750229.529 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-28T23:57:12.699Z,1469750232.699 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:57:27.093Z,1469750247.093 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-28T23:57:27.183Z,1469750247.183 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-28T23:59:01.457Z,1469750341.457 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-28T23:59:01.835Z,1469750341.835 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:01:02.315Z,1469750462.315 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:01:02.709Z,1469750462.709 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:02:40.050Z,1469750560.050 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:02:54.139Z,1469750574.139 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:03:03.348Z,1469750583.348 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:03:03.769Z,1469750583.769 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:03:08.173Z,1469750588.173 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:03:22.540Z,1469750602.540 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:03:36.951Z,1469750616.951 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:03:36.970Z,1469750616.970 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T00:03:47.374Z,1469750627.374 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 134.288875 min 2016-07-29T00:03:52.642Z,1469750632.642 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T00:05:04.175Z,1469750704.175 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:05:04.597Z,1469750704.597 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:07:05.207Z,1469750825.207 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:07:05.559Z,1469750825.559 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:08:51.846Z,1469750931.846 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:09:07.980Z,1469750947.980 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:09:07.981Z,1469750947.981 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:09:08.432Z,1469750948.432 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:09:09.755Z,1469750949.755 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:09:22.850Z,1469750962.850 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:09:37.249Z,1469750977.249 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:09:38.023Z,1469750978.023 [PNI_TCM](FAULT): LCB fault: Current Limiter Activated. 2016-07-29T00:09:51.262Z,1469750991.262 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:09:51.350Z,1469750991.350 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T00:11:08.761Z,1469751068.761 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:11:08.763Z,1469751068.763 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:11:12.557Z,1469751072.557 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:13:09.384Z,1469751189.384 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:13:09.386Z,1469751189.386 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:13:15.340Z,1469751195.340 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:14:05.796Z,1469751245.796 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 144.596191 min 2016-07-29T00:14:12.667Z,1469751252.667 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T00:15:04.280Z,1469751304.280 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:15:10.283Z,1469751310.283 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:15:10.285Z,1469751310.285 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:15:17.425Z,1469751317.425 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:15:22.248Z,1469751322.248 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:15:36.623Z,1469751336.623 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:15:51.020Z,1469751351.020 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:16:05.446Z,1469751365.446 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:16:05.503Z,1469751365.503 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T00:17:11.391Z,1469751431.391 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:17:11.392Z,1469751431.392 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:17:19.482Z,1469751439.482 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:17:19.776Z,1469751439.776 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T00:19:12.586Z,1469751552.586 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:19:12.588Z,1469751552.588 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:21:16.222Z,1469751676.222 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:21:16.224Z,1469751676.224 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:21:18.603Z,1469751678.603 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:21:32.737Z,1469751692.737 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:21:47.145Z,1469751707.145 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:22:01.515Z,1469751721.515 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:22:15.926Z,1469751735.926 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:22:15.943Z,1469751735.943 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T00:23:17.243Z,1469751797.243 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:23:17.245Z,1469751797.245 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:24:24.178Z,1469751864.178 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 154.902637 min 2016-07-29T00:24:31.086Z,1469751871.086 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T00:24:31.111Z,1469751871.111 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T00:25:18.301Z,1469751918.301 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:25:18.302Z,1469751918.302 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:27:19.297Z,1469752039.297 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:27:19.299Z,1469752039.299 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:27:28.635Z,1469752048.635 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:27:43.037Z,1469752063.037 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:27:57.436Z,1469752077.436 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:28:11.856Z,1469752091.856 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:28:27.859Z,1469752107.859 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:28:27.911Z,1469752107.911 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T00:29:20.346Z,1469752160.346 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:29:20.364Z,1469752160.364 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:29:20.572Z,1469752160.572 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:31:21.351Z,1469752281.351 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:31:21.353Z,1469752281.353 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:31:22.653Z,1469752282.653 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:33:22.328Z,1469752402.328 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:33:22.329Z,1469752402.329 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:33:25.440Z,1469752405.440 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:33:40.310Z,1469752420.310 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:33:57.249Z,1469752437.249 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:34:11.634Z,1469752451.634 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:34:26.026Z,1469752466.026 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:34:40.424Z,1469752480.424 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:34:40.443Z,1469752480.443 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T00:34:42.876Z,1469752482.876 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 165.213411 min 2016-07-29T00:35:23.373Z,1469752523.373 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:35:23.375Z,1469752523.375 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:35:27.529Z,1469752527.529 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:36:46.326Z,1469752606.326 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T00:37:24.470Z,1469752644.470 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:37:24.472Z,1469752644.472 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:37:30.319Z,1469752650.319 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:37:30.486Z,1469752650.486 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T00:39:25.431Z,1469752765.431 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:39:25.432Z,1469752765.432 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:39:57.446Z,1469752797.446 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:40:14.253Z,1469752814.253 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:40:28.656Z,1469752828.656 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:40:43.037Z,1469752843.037 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:40:57.435Z,1469752857.435 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:40:57.454Z,1469752857.454 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T00:41:26.356Z,1469752886.356 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:41:26.358Z,1469752886.358 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:43:27.423Z,1469753007.423 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:43:27.425Z,1469753007.425 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:45:07.940Z,1469753107.940 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 175.632048 min 2016-07-29T00:45:28.381Z,1469753128.381 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:45:28.383Z,1469753128.383 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:46:11.193Z,1469753171.193 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:46:25.304Z,1469753185.304 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:46:39.703Z,1469753199.703 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:46:54.101Z,1469753214.101 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:47:04.083Z,1469753224.083 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T00:47:11.301Z,1469753231.301 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:47:11.390Z,1469753231.390 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T00:47:29.449Z,1469753249.449 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:47:29.451Z,1469753249.451 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:49:30.469Z,1469753370.469 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:49:30.471Z,1469753370.471 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:49:31.093Z,1469753371.093 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:51:31.345Z,1469753491.345 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:51:31.347Z,1469753491.347 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:51:33.186Z,1469753493.186 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:52:24.148Z,1469753544.148 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:52:41.496Z,1469753561.496 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:52:55.890Z,1469753575.890 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:53:09.903Z,1469753589.903 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:53:24.290Z,1469753604.290 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:53:24.309Z,1469753604.309 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T00:53:32.395Z,1469753612.395 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:53:32.397Z,1469753612.397 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:53:35.227Z,1469753615.227 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:55:26.067Z,1469753726.067 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 185.933887 min 2016-07-29T00:55:33.375Z,1469753733.375 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:55:33.377Z,1469753733.377 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:55:38.423Z,1469753738.423 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:57:23.106Z,1469753843.106 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T00:57:34.483Z,1469753854.483 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:57:34.485Z,1469753854.485 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:57:40.504Z,1469753860.504 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T00:57:40.507Z,1469753860.507 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T00:58:41.027Z,1469753921.027 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-29T00:58:56.226Z,1469753936.226 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-29T00:59:10.597Z,1469753950.597 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:59:24.996Z,1469753964.996 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:59:35.500Z,1469753975.500 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:59:35.501Z,1469753975.501 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T00:59:41.903Z,1469753981.903 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T00:59:41.923Z,1469753981.923 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T01:01:36.719Z,1469754096.719 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:01:36.721Z,1469754096.721 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:03:37.670Z,1469754217.670 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:03:37.672Z,1469754217.672 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:04:57.392Z,1469754297.392 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:05:11.791Z,1469754311.791 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:05:26.197Z,1469754326.197 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:05:38.606Z,1469754338.606 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:05:38.607Z,1469754338.607 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:05:40.218Z,1469754340.218 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:05:47.417Z,1469754347.417 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 196.243717 min 2016-07-29T01:05:54.268Z,1469754354.268 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:05:54.287Z,1469754354.287 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T01:07:39.546Z,1469754459.546 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:07:39.548Z,1469754459.548 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:07:39.559Z,1469754459.559 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-07-29T01:07:39.560Z,1469754459.560 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-07-29T01:07:42.712Z,1469754462.712 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T01:09:41.278Z,1469754581.278 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:11:10.199Z,1469754670.199 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:11:24.612Z,1469754684.612 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:11:38.598Z,1469754698.598 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:11:43.519Z,1469754703.519 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:11:52.972Z,1469754712.972 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:12:10.197Z,1469754730.197 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:12:10.230Z,1469754730.230 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T01:13:46.309Z,1469754826.309 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:15:48.407Z,1469754948.407 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:16:07.418Z,1469754967.418 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 206.623047 min 2016-07-29T01:17:23.186Z,1469755043.186 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:17:37.590Z,1469755057.590 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:17:50.436Z,1469755070.436 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:17:50.820Z,1469755070.820 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T01:17:51.601Z,1469755071.601 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:18:00.774Z,1469755080.774 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T01:18:00.820Z,1469755080.820 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T01:18:05.975Z,1469755085.975 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:18:23.242Z,1469755103.242 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:18:23.281Z,1469755103.281 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T01:23:38.784Z,1469755418.784 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:23:53.187Z,1469755433.187 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:24:07.186Z,1469755447.186 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:24:21.574Z,1469755461.574 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:24:38.524Z,1469755478.524 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:24:38.545Z,1469755478.545 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T01:24:40.152Z,1469755480.152 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:24:40.154Z,1469755480.154 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:26:25.442Z,1469755585.442 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 216.923600 min 2016-07-29T01:26:41.159Z,1469755601.159 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:26:41.161Z,1469755601.161 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:28:42.216Z,1469755722.216 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:28:42.218Z,1469755722.218 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:29:50.713Z,1469755790.713 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:29:51.101Z,1469755791.101 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:30:05.499Z,1469755805.499 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:30:13.463Z,1469755813.463 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T01:30:19.872Z,1469755819.872 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:30:33.990Z,1469755833.990 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:30:43.240Z,1469755843.240 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:30:43.241Z,1469755843.241 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:30:48.389Z,1469755848.389 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:30:48.440Z,1469755848.440 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T01:31:52.770Z,1469755912.770 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:32:46.492Z,1469755966.492 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:32:46.493Z,1469755966.493 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:33:54.843Z,1469756034.843 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:34:47.109Z,1469756087.109 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:34:47.110Z,1469756087.110 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:35:56.900Z,1469756156.900 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:36:01.206Z,1469756161.206 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:36:15.616Z,1469756175.616 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:36:29.987Z,1469756189.987 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:36:46.822Z,1469756206.822 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:36:46.833Z,1469756206.833 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 227.232682 min 2016-07-29T01:36:48.100Z,1469756208.100 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:36:48.102Z,1469756208.102 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:37:00.866Z,1469756220.866 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:37:00.915Z,1469756220.915 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T01:37:59.678Z,1469756279.678 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:37:59.884Z,1469756279.884 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T01:38:49.104Z,1469756329.104 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:38:49.105Z,1469756329.105 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:40:32.562Z,1469756432.562 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T01:40:50.307Z,1469756450.307 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:40:50.309Z,1469756450.309 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:42:18.812Z,1469756538.812 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:42:33.218Z,1469756553.218 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:42:47.233Z,1469756567.233 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:42:51.255Z,1469756571.255 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:42:51.257Z,1469756571.257 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:43:01.617Z,1469756581.617 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:43:15.678Z,1469756595.678 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:43:15.728Z,1469756595.728 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T01:44:52.167Z,1469756692.167 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:44:52.169Z,1469756692.169 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:46:53.171Z,1469756813.171 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:46:53.173Z,1469756813.173 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:47:09.578Z,1469756829.578 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 237.613428 min 2016-07-29T01:48:28.188Z,1469756908.188 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:48:42.574Z,1469756922.574 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:48:54.179Z,1469756934.179 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:48:54.181Z,1469756934.181 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:48:56.988Z,1469756936.988 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:49:11.138Z,1469756951.138 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:49:25.525Z,1469756965.525 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:49:25.545Z,1469756965.545 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T01:50:00.408Z,1469757000.408 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:50:51.784Z,1469757051.784 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T01:50:55.001Z,1469757055.001 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:50:55.003Z,1469757055.003 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:52:02.710Z,1469757122.710 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:52:56.078Z,1469757176.078 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:52:56.080Z,1469757176.080 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:54:04.811Z,1469757244.811 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:54:38.218Z,1469757278.218 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:54:52.627Z,1469757292.627 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:54:57.081Z,1469757297.081 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:54:57.083Z,1469757297.083 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:55:07.047Z,1469757307.047 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:55:21.044Z,1469757321.044 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:55:35.126Z,1469757335.126 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T01:55:35.174Z,1469757335.174 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T01:56:06.864Z,1469757366.864 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:56:58.056Z,1469757418.056 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:56:58.058Z,1469757418.058 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:57:29.695Z,1469757449.695 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 247.993783 min 2016-07-29T01:58:08.905Z,1469757488.905 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T01:58:09.050Z,1469757489.050 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T01:58:59.060Z,1469757539.060 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T01:58:59.062Z,1469757539.062 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:00:47.702Z,1469757647.702 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:01:00.080Z,1469757660.080 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:01:00.082Z,1469757660.082 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:01:01.708Z,1469757661.708 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:01:13.669Z,1469757673.669 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T02:01:16.078Z,1469757676.078 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:01:30.100Z,1469757690.100 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:01:47.454Z,1469757707.454 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:01:47.507Z,1469757707.507 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T02:03:01.020Z,1469757781.020 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:03:01.023Z,1469757781.023 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:05:02.070Z,1469757902.070 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:05:02.073Z,1469757902.073 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:07:03.058Z,1469758023.058 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:07:03.060Z,1469758023.060 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:07:03.450Z,1469758023.450 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:07:17.474Z,1469758037.474 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:07:31.885Z,1469758051.885 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:07:46.251Z,1469758066.251 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:07:47.930Z,1469758067.930 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 258.298275 min 2016-07-29T02:08:03.129Z,1469758083.129 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:08:03.148Z,1469758083.148 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T02:09:04.006Z,1469758144.006 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:09:04.008Z,1469758144.008 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:10:09.182Z,1469758209.182 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:11:04.948Z,1469758264.948 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:11:04.950Z,1469758264.950 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:11:34.147Z,1469758294.147 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T02:11:34.171Z,1469758294.171 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T02:12:11.263Z,1469758331.263 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:13:08.099Z,1469758388.099 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:13:08.101Z,1469758388.101 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:13:19.344Z,1469758399.344 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:13:33.738Z,1469758413.738 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:13:48.134Z,1469758428.134 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:14:02.559Z,1469758442.559 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:14:14.038Z,1469758454.038 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:14:19.545Z,1469758459.545 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:14:19.564Z,1469758459.564 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T02:15:09.770Z,1469758509.770 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:15:09.772Z,1469758509.772 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:16:16.831Z,1469758576.831 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:17:10.540Z,1469758630.540 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:17:10.542Z,1469758630.542 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:18:05.738Z,1469758685.738 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 268.594694 min 2016-07-29T02:18:19.623Z,1469758699.623 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:18:19.840Z,1469758699.840 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T02:19:11.500Z,1469758751.500 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:19:11.501Z,1469758751.501 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:19:33.883Z,1469758773.883 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-29T02:19:47.919Z,1469758787.919 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:20:02.325Z,1469758802.325 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:20:16.695Z,1469758816.695 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:20:31.118Z,1469758831.118 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:20:31.137Z,1469758831.137 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T02:21:12.391Z,1469758872.391 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:21:12.392Z,1469758872.392 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:23:15.933Z,1469758995.933 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:23:15.935Z,1469758995.935 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:23:46.814Z,1469759026.814 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T02:25:16.570Z,1469759116.570 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:25:16.572Z,1469759116.572 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:25:43.890Z,1469759143.890 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:25:58.276Z,1469759158.276 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:26:12.682Z,1469759172.682 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:26:27.104Z,1469759187.104 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:26:41.157Z,1469759201.157 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:26:41.176Z,1469759201.176 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T02:27:17.553Z,1469759237.553 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:27:17.554Z,1469759237.554 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:28:24.190Z,1469759304.190 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 278.900293 min 2016-07-29T02:29:18.540Z,1469759358.540 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:29:18.542Z,1469759358.542 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:30:19.883Z,1469759419.883 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:31:19.460Z,1469759479.460 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:31:19.462Z,1469759479.462 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:31:53.972Z,1469759513.972 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:32:08.361Z,1469759528.361 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:32:21.980Z,1469759541.980 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:32:22.757Z,1469759542.757 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:32:39.274Z,1469759559.274 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:32:53.303Z,1469759573.303 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:32:53.347Z,1469759573.347 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T02:33:20.502Z,1469759600.502 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:33:20.504Z,1469759600.504 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:34:05.019Z,1469759645.019 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T02:34:24.482Z,1469759664.482 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:35:21.591Z,1469759721.591 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:35:21.593Z,1469759721.593 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:36:26.512Z,1469759786.512 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:37:22.717Z,1469759842.717 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:37:22.719Z,1469759842.719 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:38:06.443Z,1469759886.443 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:38:20.840Z,1469759900.840 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:38:28.601Z,1469759908.601 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:38:28.931Z,1469759908.931 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T02:38:34.868Z,1469759914.868 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:38:42.881Z,1469759922.881 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 289.213574 min 2016-07-29T02:38:49.031Z,1469759929.031 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:39:03.436Z,1469759943.436 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:39:03.455Z,1469759943.455 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T02:39:23.856Z,1469759963.856 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:39:23.857Z,1469759963.857 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:41:24.855Z,1469760084.855 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:41:24.857Z,1469760084.857 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:43:25.893Z,1469760205.893 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:43:25.916Z,1469760205.916 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:44:15.513Z,1469760255.513 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:44:23.885Z,1469760263.885 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T02:44:29.892Z,1469760269.892 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:44:43.901Z,1469760283.901 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:44:58.326Z,1469760298.326 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:45:17.622Z,1469760317.622 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:45:17.641Z,1469760317.641 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T02:45:26.810Z,1469760326.810 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:45:26.811Z,1469760326.811 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:47:27.855Z,1469760447.855 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:47:27.857Z,1469760447.857 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:49:01.206Z,1469760541.206 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 299.519466 min 2016-07-29T02:49:28.973Z,1469760568.973 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:49:28.975Z,1469760568.975 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:50:29.298Z,1469760629.298 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:50:30.735Z,1469760630.735 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:50:45.118Z,1469760645.118 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:50:59.527Z,1469760659.527 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:51:16.089Z,1469760676.089 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:51:30.089Z,1469760690.089 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:51:30.091Z,1469760690.091 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:51:30.487Z,1469760690.487 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:51:30.506Z,1469760690.506 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T02:52:32.092Z,1469760752.092 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:53:31.216Z,1469760811.216 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:53:31.218Z,1469760811.218 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:54:34.895Z,1469760874.895 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:54:41.976Z,1469760881.976 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T02:55:32.144Z,1469760932.144 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:55:32.146Z,1469760932.146 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:56:37.677Z,1469760997.677 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:56:43.429Z,1469761003.429 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:56:57.451Z,1469761017.451 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:57:11.853Z,1469761031.853 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:57:25.966Z,1469761045.966 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:57:33.169Z,1469761053.169 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:57:33.171Z,1469761053.171 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:57:40.345Z,1469761060.345 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T02:57:40.393Z,1469761060.393 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T02:58:39.738Z,1469761119.738 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T02:58:40.104Z,1469761120.104 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T02:59:19.693Z,1469761159.693 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 309.827962 min 2016-07-29T02:59:34.201Z,1469761174.201 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T02:59:34.203Z,1469761174.203 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:01:35.223Z,1469761295.223 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:01:35.225Z,1469761295.225 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:02:53.306Z,1469761373.306 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:03:07.681Z,1469761387.681 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:03:23.319Z,1469761403.319 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:03:36.197Z,1469761416.197 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:03:36.199Z,1469761416.199 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:03:37.367Z,1469761417.367 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:03:51.776Z,1469761431.776 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:03:51.795Z,1469761431.795 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T03:05:01.061Z,1469761501.061 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T03:05:01.115Z,1469761501.115 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T03:05:37.070Z,1469761537.070 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:05:37.072Z,1469761537.072 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:07:40.963Z,1469761660.963 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:07:40.965Z,1469761660.965 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:09:04.751Z,1469761744.751 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:09:19.157Z,1469761759.157 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:09:33.535Z,1469761773.535 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:09:37.983Z,1469761777.983 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 320.132682 min 2016-07-29T03:09:41.638Z,1469761781.638 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:09:41.639Z,1469761781.639 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:09:47.641Z,1469761787.641 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:10:02.031Z,1469761802.031 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:10:02.142Z,1469761802.142 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T03:10:41.221Z,1469761841.221 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:11:42.762Z,1469761902.762 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:11:42.763Z,1469761902.763 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:12:43.331Z,1469761963.331 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:13:43.880Z,1469762023.880 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:13:43.882Z,1469762023.882 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:14:46.125Z,1469762086.125 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:15:17.179Z,1469762117.179 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:15:31.196Z,1469762131.196 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:15:44.772Z,1469762144.772 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:15:44.774Z,1469762144.774 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:15:45.175Z,1469762145.175 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:15:59.572Z,1469762159.572 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:16:16.099Z,1469762176.099 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:16:16.142Z,1469762176.142 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T03:16:48.931Z,1469762208.931 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:17:16.196Z,1469762236.196 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T03:17:45.822Z,1469762265.822 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:17:45.824Z,1469762265.824 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:18:50.988Z,1469762330.988 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:18:51.174Z,1469762331.174 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T03:19:46.834Z,1469762386.834 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:19:46.836Z,1469762386.836 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:20:02.070Z,1469762402.070 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 330.533594 min 2016-07-29T03:21:29.102Z,1469762489.102 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:21:43.495Z,1469762503.495 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:21:47.915Z,1469762507.915 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:21:47.918Z,1469762507.918 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:21:57.882Z,1469762517.882 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:22:12.015Z,1469762532.015 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:22:26.424Z,1469762546.424 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:22:26.475Z,1469762546.475 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T03:23:48.926Z,1469762628.926 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:23:48.928Z,1469762628.928 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:25:49.991Z,1469762749.991 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:25:49.993Z,1469762749.993 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:27:35.011Z,1469762855.011 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T03:27:41.422Z,1469762861.422 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:27:51.026Z,1469762871.026 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:27:51.028Z,1469762871.028 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:27:55.443Z,1469762875.443 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:28:09.842Z,1469762889.842 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:28:24.244Z,1469762904.244 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:28:41.144Z,1469762921.144 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:28:41.164Z,1469762921.164 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T03:29:52.128Z,1469762992.128 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:29:52.130Z,1469762992.130 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:30:27.331Z,1469763027.331 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 340.954818 min 2016-07-29T03:30:51.217Z,1469763051.217 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:31:53.125Z,1469763113.125 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:31:53.126Z,1469763113.126 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:32:53.290Z,1469763173.290 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:33:54.096Z,1469763234.096 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:33:54.103Z,1469763234.103 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:33:54.105Z,1469763234.105 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:34:08.500Z,1469763248.500 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:34:22.513Z,1469763262.513 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:34:36.628Z,1469763276.628 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:34:51.074Z,1469763291.074 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:34:51.142Z,1469763291.142 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T03:34:56.089Z,1469763296.089 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:35:55.150Z,1469763355.150 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:35:55.152Z,1469763355.152 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:36:58.326Z,1469763418.326 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:37:53.774Z,1469763473.774 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T03:37:56.193Z,1469763476.193 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:37:56.195Z,1469763476.195 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:39:00.364Z,1469763540.364 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:39:00.388Z,1469763540.388 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T03:39:57.164Z,1469763597.164 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:39:57.172Z,1469763597.172 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:40:05.918Z,1469763605.918 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-29T03:40:21.510Z,1469763621.510 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-29T03:40:35.516Z,1469763635.516 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:40:45.520Z,1469763645.520 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 351.258171 min 2016-07-29T03:40:49.643Z,1469763649.643 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:41:03.633Z,1469763663.633 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:41:03.652Z,1469763663.652 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T03:41:58.127Z,1469763718.127 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:41:58.129Z,1469763718.129 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:43:59.127Z,1469763839.127 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:43:59.129Z,1469763839.129 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:46:00.566Z,1469763960.566 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:46:00.568Z,1469763960.568 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:46:18.640Z,1469763978.640 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:46:33.026Z,1469763993.026 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:46:47.415Z,1469764007.415 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:47:01.817Z,1469764021.817 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:47:18.350Z,1469764038.350 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:47:18.407Z,1469764038.407 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T03:47:22.799Z,1469764042.799 [CBIT](IMPORTANT): Beginning GF scan 2016-07-29T03:48:01.130Z,1469764081.130 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:48:01.132Z,1469764081.132 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:48:11.620Z,1469764091.620 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T03:50:02.043Z,1469764202.043 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:50:02.045Z,1469764202.045 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:51:00.740Z,1469764260.740 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:51:03.957Z,1469764263.957 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 361.565365 min 2016-07-29T03:52:03.166Z,1469764323.166 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:52:03.168Z,1469764323.168 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:52:31.244Z,1469764351.244 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:52:45.261Z,1469764365.261 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:52:59.659Z,1469764379.659 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:53:02.913Z,1469764382.913 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:53:13.773Z,1469764393.773 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:53:14.567Z,1469764394.567 [PNI_TCM](FAULT): LCB fault: Current Limiter Activated. 2016-07-29T03:53:28.160Z,1469764408.160 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:53:28.213Z,1469764408.213 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T03:54:04.168Z,1469764444.168 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:54:04.178Z,1469764444.178 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:55:07.407Z,1469764507.407 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:56:08.434Z,1469764568.434 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:56:08.436Z,1469764568.436 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:57:11.054Z,1469764631.054 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:58:09.290Z,1469764689.290 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:58:09.292Z,1469764689.292 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T03:58:29.374Z,1469764709.374 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T03:58:29.441Z,1469764709.441 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T03:58:40.971Z,1469764720.971 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:58:55.383Z,1469764735.383 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:59:09.769Z,1469764749.769 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:59:13.196Z,1469764753.196 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T03:59:13.400Z,1469764753.400 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T03:59:25.373Z,1469764765.373 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:59:39.478Z,1469764779.478 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T03:59:39.518Z,1469764779.518 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T04:00:10.313Z,1469764810.313 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:00:10.314Z,1469764810.314 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:01:22.374Z,1469764882.374 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 371.872331 min 2016-07-29T04:02:11.220Z,1469764931.220 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:02:11.222Z,1469764931.222 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:04:12.267Z,1469765052.267 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:04:12.269Z,1469765052.269 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:04:51.983Z,1469765091.983 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:05:06.360Z,1469765106.360 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:05:20.753Z,1469765120.753 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:05:37.283Z,1469765137.283 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:05:51.663Z,1469765151.663 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:05:51.681Z,1469765151.681 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T04:06:13.274Z,1469765173.274 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:06:13.276Z,1469765173.276 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:08:14.105Z,1469765294.105 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:08:14.108Z,1469765294.108 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:10:15.187Z,1469765415.187 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:10:15.188Z,1469765415.188 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:10:43.968Z,1469765443.968 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T04:11:04.498Z,1469765464.498 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:11:13.480Z,1469765473.480 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:11:18.885Z,1469765478.885 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:11:33.285Z,1469765493.285 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:11:40.915Z,1469765500.915 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 382.181283 min 2016-07-29T04:11:47.413Z,1469765507.413 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:12:01.438Z,1469765521.438 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:12:01.484Z,1469765521.484 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T04:12:16.231Z,1469765536.231 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:12:16.233Z,1469765536.233 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:13:15.521Z,1469765595.521 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:14:17.334Z,1469765657.334 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:14:17.336Z,1469765657.336 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:15:17.599Z,1469765717.599 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:16:18.343Z,1469765778.343 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:16:18.344Z,1469765778.344 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:17:13.751Z,1469765833.751 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:17:19.616Z,1469765839.616 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:17:28.093Z,1469765848.093 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:17:42.495Z,1469765862.495 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:17:56.890Z,1469765876.890 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:18:13.482Z,1469765893.482 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:18:13.503Z,1469765893.503 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T04:18:19.144Z,1469765899.144 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:18:19.146Z,1469765899.146 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:19:21.729Z,1469765961.729 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:19:22.052Z,1469765962.052 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T04:20:20.216Z,1469766020.216 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:20:20.218Z,1469766020.218 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:21:03.136Z,1469766063.136 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T04:21:59.601Z,1469766119.601 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 392.491960 min 2016-07-29T04:22:21.233Z,1469766141.233 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:22:21.234Z,1469766141.234 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:23:26.203Z,1469766206.203 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:23:40.569Z,1469766220.569 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:23:54.972Z,1469766234.972 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:24:09.042Z,1469766249.042 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:24:22.241Z,1469766262.241 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:24:22.242Z,1469766262.242 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:24:23.420Z,1469766263.420 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:24:23.460Z,1469766263.460 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T04:26:23.297Z,1469766383.297 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:26:23.299Z,1469766383.299 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:28:24.444Z,1469766504.444 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:28:24.446Z,1469766504.446 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:29:36.509Z,1469766576.509 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:29:50.928Z,1469766590.928 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:30:05.334Z,1469766605.334 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:30:20.933Z,1469766620.933 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:30:25.435Z,1469766625.435 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:30:25.437Z,1469766625.437 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:30:34.985Z,1469766634.985 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:30:35.004Z,1469766635.004 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T04:31:21.010Z,1469766681.010 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T04:31:22.159Z,1469766682.159 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:32:17.896Z,1469766737.896 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 402.797624 min 2016-07-29T04:32:26.398Z,1469766746.398 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:32:26.400Z,1469766746.400 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:33:24.244Z,1469766804.244 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:34:27.454Z,1469766867.454 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:34:27.456Z,1469766867.456 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:35:27.042Z,1469766927.042 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:35:47.939Z,1469766947.939 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:36:02.340Z,1469766962.340 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:36:16.361Z,1469766976.361 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:36:28.515Z,1469766988.515 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:36:28.517Z,1469766988.517 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:36:32.526Z,1469766992.526 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:36:46.902Z,1469767006.902 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:36:46.963Z,1469767006.963 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T04:37:29.139Z,1469767049.139 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:38:29.317Z,1469767109.317 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:38:29.319Z,1469767109.319 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:39:33.267Z,1469767173.267 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:39:33.450Z,1469767173.450 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T04:40:30.316Z,1469767230.316 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:40:30.318Z,1469767230.318 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:41:40.451Z,1469767300.451 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T04:42:00.054Z,1469767320.054 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:42:14.458Z,1469767334.458 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:42:28.852Z,1469767348.852 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:42:31.256Z,1469767351.256 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:42:31.258Z,1469767351.258 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:42:39.262Z,1469767359.262 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 413.107389 min 2016-07-29T04:42:42.911Z,1469767362.911 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:42:57.327Z,1469767377.327 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:42:57.346Z,1469767377.346 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T04:44:32.182Z,1469767472.182 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:44:32.184Z,1469767472.184 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T04:44:32.197Z,1469767472.197 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-07-29T04:44:32.198Z,1469767472.198 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-07-29T04:48:12.255Z,1469767692.255 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:48:26.645Z,1469767706.645 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:48:41.056Z,1469767721.056 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:48:55.449Z,1469767735.449 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:49:12.308Z,1469767752.308 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:49:12.326Z,1469767752.326 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T04:51:33.581Z,1469767893.581 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:51:58.552Z,1469767918.552 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T04:51:58.635Z,1469767918.635 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T04:52:58.692Z,1469767978.692 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 423.477637 min 2016-07-29T04:53:35.657Z,1469768015.657 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:54:25.338Z,1469768065.338 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:54:39.726Z,1469768079.726 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:54:54.141Z,1469768094.141 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:55:08.356Z,1469768108.356 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:55:22.763Z,1469768122.763 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T04:55:22.779Z,1469768122.779 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T04:55:37.687Z,1469768137.687 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:57:40.489Z,1469768260.489 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:59:42.522Z,1469768382.522 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T04:59:42.916Z,1469768382.916 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T05:00:35.776Z,1469768435.776 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:00:51.383Z,1469768451.383 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-29T05:01:06.999Z,1469768466.999 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-29T05:01:21.138Z,1469768481.138 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:01:33.142Z,1469768493.142 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:01:33.144Z,1469768493.144 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:01:35.115Z,1469768495.115 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:01:35.133Z,1469768495.133 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T05:03:17.291Z,1469768597.291 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 433.787891 min 2016-07-29T05:03:34.139Z,1469768614.139 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:03:34.141Z,1469768614.141 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:04:14.514Z,1469768654.514 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T05:05:34.981Z,1469768734.981 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:05:34.983Z,1469768734.983 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:06:47.828Z,1469768807.828 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:07:02.199Z,1469768822.199 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:07:16.605Z,1469768836.605 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:07:33.512Z,1469768853.512 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:07:35.910Z,1469768855.910 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:07:35.912Z,1469768855.912 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:07:47.890Z,1469768867.890 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:07:47.931Z,1469768867.931 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T05:09:38.508Z,1469768978.508 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:09:38.509Z,1469768978.509 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:11:39.311Z,1469769099.311 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:11:39.313Z,1469769099.313 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:11:43.072Z,1469769103.072 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T05:13:01.015Z,1469769181.015 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:13:15.425Z,1469769195.425 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:13:29.439Z,1469769209.439 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:13:35.854Z,1469769215.854 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 444.096940 min 2016-07-29T05:13:40.367Z,1469769220.367 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:13:40.369Z,1469769220.369 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:13:43.548Z,1469769223.548 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:13:45.117Z,1469769225.117 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T05:13:57.554Z,1469769237.554 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:13:57.609Z,1469769237.609 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T05:14:32.735Z,1469769272.735 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T05:15:41.404Z,1469769341.404 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:15:41.407Z,1469769341.407 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:15:47.214Z,1469769347.214 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T05:17:42.376Z,1469769462.376 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:17:42.378Z,1469769462.378 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:17:49.255Z,1469769469.255 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T05:19:10.720Z,1469769550.720 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:19:25.124Z,1469769565.124 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:19:39.513Z,1469769579.513 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:19:43.543Z,1469769583.543 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:19:43.549Z,1469769583.549 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:19:51.272Z,1469769591.272 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T05:19:51.594Z,1469769591.594 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T05:19:53.535Z,1469769593.535 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:20:12.769Z,1469769612.769 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:20:12.802Z,1469769612.802 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T05:21:44.532Z,1469769704.532 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:21:44.535Z,1469769704.535 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:23:45.581Z,1469769825.581 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:23:45.583Z,1469769825.583 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:23:54.434Z,1469769834.434 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 454.405859 min 2016-07-29T05:24:51.621Z,1469769891.621 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T05:25:25.702Z,1469769925.702 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:25:40.120Z,1469769940.120 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:25:46.516Z,1469769946.516 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:25:46.518Z,1469769946.518 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:25:54.523Z,1469769954.523 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:26:11.532Z,1469769971.532 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:26:25.921Z,1469769985.921 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:26:25.969Z,1469769985.969 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T05:27:47.683Z,1469770067.683 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:27:47.685Z,1469770067.685 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:29:48.751Z,1469770188.751 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:29:48.756Z,1469770188.756 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:31:39.089Z,1469770299.089 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:31:49.947Z,1469770309.947 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:31:49.949Z,1469770309.949 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:31:52.427Z,1469770312.427 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T05:31:53.479Z,1469770313.479 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:32:07.882Z,1469770327.882 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:32:22.024Z,1469770342.024 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:32:36.036Z,1469770356.036 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:32:36.092Z,1469770356.092 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T05:33:50.935Z,1469770430.935 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:33:50.936Z,1469770430.936 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:33:55.237Z,1469770435.237 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T05:34:12.988Z,1469770452.988 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 464.715039 min 2016-07-29T05:35:13.096Z,1469770513.096 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T05:35:51.868Z,1469770551.868 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:35:51.870Z,1469770551.870 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:35:57.342Z,1469770557.342 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T05:37:48.904Z,1469770668.904 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:37:52.942Z,1469770672.942 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:37:52.943Z,1469770672.943 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:37:59.460Z,1469770679.460 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T05:38:03.300Z,1469770683.300 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:38:17.415Z,1469770697.415 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:38:31.790Z,1469770711.790 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:38:46.187Z,1469770726.187 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:38:46.206Z,1469770726.206 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T05:39:53.993Z,1469770793.993 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:39:53.995Z,1469770793.995 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:40:02.242Z,1469770802.242 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T05:40:02.393Z,1469770802.393 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T05:41:55.024Z,1469770915.024 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:41:55.026Z,1469770915.026 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:43:55.970Z,1469771035.970 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:43:55.972Z,1469771035.972 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:43:59.169Z,1469771039.169 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:44:13.565Z,1469771053.565 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:44:27.968Z,1469771067.968 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:44:32.422Z,1469771072.422 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 475.039453 min 2016-07-29T05:44:42.041Z,1469771082.041 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:44:56.441Z,1469771096.441 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:44:56.477Z,1469771096.477 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T05:45:38.466Z,1469771138.466 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T05:45:38.489Z,1469771138.489 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T05:45:56.909Z,1469771156.909 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:45:56.910Z,1469771156.910 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:47:57.873Z,1469771277.873 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:47:57.876Z,1469771277.876 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:49:58.944Z,1469771398.944 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:49:58.946Z,1469771398.946 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:50:11.416Z,1469771411.416 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:50:25.809Z,1469771425.809 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:50:40.242Z,1469771440.242 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:50:55.089Z,1469771455.089 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:51:09.156Z,1469771469.156 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:51:09.208Z,1469771469.208 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T05:51:59.721Z,1469771519.721 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:51:59.722Z,1469771519.722 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:52:02.743Z,1469771522.743 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T05:54:00.811Z,1469771640.811 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:54:00.812Z,1469771640.812 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:54:04.833Z,1469771644.833 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T05:54:52.443Z,1469771692.443 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 485.373405 min 2016-07-29T05:56:01.590Z,1469771761.590 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:56:01.591Z,1469771761.591 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:56:07.631Z,1469771767.631 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T05:56:21.559Z,1469771781.559 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:56:35.950Z,1469771795.950 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:56:50.344Z,1469771810.344 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:57:07.341Z,1469771827.341 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:57:21.739Z,1469771841.739 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T05:57:21.759Z,1469771841.759 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T05:57:56.156Z,1469771876.156 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T05:58:02.622Z,1469771882.622 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:58:02.624Z,1469771882.624 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T05:58:09.648Z,1469771889.648 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:00:03.581Z,1469772003.581 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:00:03.583Z,1469772003.583 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:00:11.681Z,1469772011.681 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:00:13.240Z,1469772013.240 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T06:02:04.641Z,1469772124.641 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:02:04.642Z,1469772124.642 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:02:34.771Z,1469772154.771 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:02:48.787Z,1469772168.787 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:03:03.166Z,1469772183.166 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:03:17.299Z,1469772197.299 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:03:31.709Z,1469772211.709 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:03:31.727Z,1469772211.727 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T06:04:05.744Z,1469772245.744 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:04:05.746Z,1469772245.746 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:05:11.060Z,1469772311.060 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 495.683171 min 2016-07-29T06:06:06.798Z,1469772366.798 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:06:06.799Z,1469772366.799 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:08:07.896Z,1469772487.896 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:08:07.898Z,1469772487.898 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:08:15.173Z,1469772495.173 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T06:08:44.395Z,1469772524.395 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:08:58.784Z,1469772538.784 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:09:14.808Z,1469772554.808 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:09:28.892Z,1469772568.892 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:09:42.902Z,1469772582.902 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:09:42.922Z,1469772582.922 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T06:10:08.905Z,1469772608.905 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:10:08.932Z,1469772608.932 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:12:09.975Z,1469772729.975 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:12:09.977Z,1469772729.977 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:12:12.234Z,1469772732.234 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:14:10.969Z,1469772850.969 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:14:10.971Z,1469772850.971 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:14:14.319Z,1469772854.319 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:14:55.855Z,1469772895.855 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:15:10.250Z,1469772910.250 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:15:24.636Z,1469772924.636 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:15:35.453Z,1469772935.453 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 506.090527 min 2016-07-29T06:15:38.765Z,1469772938.765 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:15:53.108Z,1469772953.108 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:15:53.127Z,1469772953.127 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-07-29T06:16:11.926Z,1469772971.926 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:16:11.928Z,1469772971.928 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:16:16.365Z,1469772976.365 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:18:13.048Z,1469773093.048 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:18:13.050Z,1469773093.050 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:18:18.390Z,1469773098.390 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:18:33.027Z,1469773113.027 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T06:20:14.163Z,1469773214.163 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:20:14.165Z,1469773214.165 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-07-29T06:20:21.197Z,1469773221.197 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:20:21.398Z,1469773221.398 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T06:21:08.268Z,1469773268.268 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-07-29T06:21:23.847Z,1469773283.847 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-07-29T06:23:15.322Z,1469773395.322 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:23:15.324Z,1469773395.324 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:25:53.696Z,1469773553.696 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 516.394857 min 2016-07-29T06:26:16.237Z,1469773576.237 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:26:16.239Z,1469773576.239 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:28:51.221Z,1469773731.221 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T06:29:17.346Z,1469773757.346 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:29:17.349Z,1469773757.349 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:32:18.280Z,1469773938.280 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:32:18.282Z,1469773938.282 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:32:21.873Z,1469773941.873 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:34:23.895Z,1469774063.895 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:35:19.220Z,1469774119.220 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:35:19.226Z,1469774119.226 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:36:11.976Z,1469774171.976 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 526.699544 min 2016-07-29T06:36:26.689Z,1469774186.689 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:38:20.379Z,1469774300.379 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:38:20.381Z,1469774300.381 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:38:28.702Z,1469774308.702 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:39:09.556Z,1469774349.556 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T06:39:09.650Z,1469774349.650 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T06:40:30.808Z,1469774430.808 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:40:31.171Z,1469774431.171 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T06:41:22.098Z,1469774482.098 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:41:22.101Z,1469774482.101 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:44:22.842Z,1469774662.842 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:44:22.860Z,1469774662.860 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:46:30.298Z,1469774790.298 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 537.003776 min 2016-07-29T06:47:24.009Z,1469774844.009 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:47:24.011Z,1469774844.011 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:50:25.063Z,1469775025.063 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:50:25.066Z,1469775025.066 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:51:23.502Z,1469775083.502 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T06:52:34.397Z,1469775154.397 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:53:26.152Z,1469775206.152 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:53:26.154Z,1469775206.154 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:54:36.423Z,1469775276.423 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:56:27.355Z,1469775387.355 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:56:27.357Z,1469775387.357 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:56:39.205Z,1469775399.205 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:56:48.574Z,1469775408.574 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 547.308268 min 2016-07-29T06:58:41.331Z,1469775521.331 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T06:59:28.225Z,1469775568.225 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T06:59:28.227Z,1469775568.227 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:00:44.117Z,1469775644.117 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:00:44.445Z,1469775644.445 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T07:01:43.637Z,1469775703.637 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T07:02:29.090Z,1469775749.090 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:02:29.093Z,1469775749.093 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:05:30.268Z,1469775930.268 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:05:30.270Z,1469775930.270 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:07:06.839Z,1469776026.839 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 557.613411 min 2016-07-29T07:08:31.099Z,1469776111.099 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:08:31.102Z,1469776111.102 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:11:31.979Z,1469776291.979 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:11:31.981Z,1469776291.981 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:12:04.670Z,1469776324.670 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T07:12:44.349Z,1469776364.349 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:14:32.958Z,1469776472.958 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:14:32.961Z,1469776472.961 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:14:47.139Z,1469776487.139 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:16:49.569Z,1469776609.569 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:17:25.142Z,1469776645.142 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 567.919401 min 2016-07-29T07:17:34.085Z,1469776654.085 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:17:34.087Z,1469776654.087 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:18:51.603Z,1469776731.603 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:20:35.181Z,1469776835.181 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:20:35.182Z,1469776835.182 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:20:53.736Z,1469776853.736 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:20:53.996Z,1469776853.996 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T07:22:24.482Z,1469776944.482 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T07:23:36.086Z,1469777016.086 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:23:36.088Z,1469777016.088 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:26:37.139Z,1469777197.139 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:26:37.141Z,1469777197.141 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:27:43.292Z,1469777263.292 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 578.220768 min 2016-07-29T07:29:38.288Z,1469777378.288 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:29:38.322Z,1469777378.322 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:32:39.249Z,1469777559.249 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:32:39.251Z,1469777559.251 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:32:43.232Z,1469777563.232 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T07:32:43.267Z,1469777563.267 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T07:32:54.073Z,1469777574.073 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:34:58.579Z,1469777698.579 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:35:40.265Z,1469777740.265 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:35:40.268Z,1469777740.268 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:37:00.840Z,1469777820.840 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:38:01.716Z,1469777881.716 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 588.528906 min 2016-07-29T07:38:41.415Z,1469777921.415 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:38:41.417Z,1469777921.417 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:39:05.377Z,1469777945.377 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:41:07.458Z,1469778067.458 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:41:07.732Z,1469778067.732 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T07:41:42.458Z,1469778102.458 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:41:42.460Z,1469778102.460 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:44:43.443Z,1469778283.443 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:44:43.445Z,1469778283.445 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:44:57.400Z,1469778297.400 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T07:47:44.440Z,1469778464.440 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:47:44.442Z,1469778464.442 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:48:19.861Z,1469778499.861 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 598.830469 min 2016-07-29T07:50:45.381Z,1469778645.381 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:50:45.383Z,1469778645.383 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:53:08.211Z,1469778788.211 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:53:46.243Z,1469778826.243 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:53:46.245Z,1469778826.245 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:55:10.281Z,1469778910.281 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:55:15.367Z,1469778915.367 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T07:56:47.241Z,1469779007.241 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:56:47.244Z,1469779007.244 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:57:12.638Z,1469779032.638 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:58:39.048Z,1469779119.048 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 609.151302 min 2016-07-29T07:59:14.683Z,1469779154.683 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T07:59:48.135Z,1469779188.135 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T07:59:48.173Z,1469779188.173 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:01:16.805Z,1469779276.805 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:01:16.979Z,1469779276.979 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T08:02:49.156Z,1469779369.156 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:02:49.158Z,1469779369.158 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:05:33.137Z,1469779533.137 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T08:05:49.974Z,1469779549.974 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:05:49.976Z,1469779549.976 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:08:51.153Z,1469779731.153 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:08:51.155Z,1469779731.155 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:08:57.211Z,1469779737.211 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 619.452214 min 2016-07-29T08:11:52.165Z,1469779912.165 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:11:52.171Z,1469779912.171 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:13:17.057Z,1469779997.057 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:14:53.241Z,1469780093.241 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:14:53.243Z,1469780093.243 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:15:19.179Z,1469780119.179 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:15:51.980Z,1469780151.980 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T08:17:21.689Z,1469780241.689 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:17:54.356Z,1469780274.356 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:17:54.358Z,1469780274.358 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:19:15.258Z,1469780355.258 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 629.754036 min 2016-07-29T08:19:24.471Z,1469780364.471 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:20:55.279Z,1469780455.279 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:20:55.281Z,1469780455.281 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:21:26.616Z,1469780486.616 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:21:26.631Z,1469780486.631 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T08:23:56.408Z,1469780636.408 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:23:56.411Z,1469780636.411 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:26:09.730Z,1469780769.730 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T08:26:09.802Z,1469780769.802 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T08:26:57.452Z,1469780817.452 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:26:57.455Z,1469780817.455 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:29:33.728Z,1469780973.728 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 640.061589 min 2016-07-29T08:29:58.609Z,1469780998.609 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:29:58.615Z,1469780998.615 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:32:59.767Z,1469781179.767 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:32:59.769Z,1469781179.769 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:33:26.922Z,1469781206.922 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:35:28.994Z,1469781328.994 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:36:00.912Z,1469781360.912 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:36:00.914Z,1469781360.914 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:37:31.104Z,1469781451.104 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:38:22.815Z,1469781502.815 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T08:39:01.770Z,1469781541.770 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:39:01.773Z,1469781541.773 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:39:33.150Z,1469781573.150 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:39:55.829Z,1469781595.829 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 650.431250 min 2016-07-29T08:41:35.199Z,1469781695.199 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:41:35.254Z,1469781695.254 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T08:42:02.569Z,1469781722.569 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:42:02.571Z,1469781722.571 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:45:03.560Z,1469781903.560 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:45:03.562Z,1469781903.562 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:48:05.523Z,1469782085.523 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:48:05.525Z,1469782085.525 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:48:40.795Z,1469782120.795 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T08:50:23.430Z,1469782223.430 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 660.890104 min 2016-07-29T08:51:06.689Z,1469782266.689 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:51:06.691Z,1469782266.691 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:53:35.687Z,1469782415.687 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:54:07.602Z,1469782447.602 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:54:07.604Z,1469782447.604 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:55:37.732Z,1469782537.732 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:57:08.620Z,1469782628.620 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:57:08.622Z,1469782628.622 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T08:57:40.555Z,1469782660.555 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T08:58:59.531Z,1469782739.531 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T08:59:45.065Z,1469782785.065 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:00:09.877Z,1469782809.877 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:00:09.879Z,1469782809.879 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:00:41.763Z,1469782841.763 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 671.195508 min 2016-07-29T09:01:47.822Z,1469782907.822 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:01:47.988Z,1469782907.988 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T09:03:10.879Z,1469782990.879 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:03:10.904Z,1469782990.904 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:06:11.882Z,1469783171.882 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:06:11.885Z,1469783171.885 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:09:13.053Z,1469783353.053 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:09:13.055Z,1469783353.055 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:09:19.417Z,1469783359.417 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T09:11:00.024Z,1469783460.024 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 681.499349 min 2016-07-29T09:12:13.872Z,1469783533.872 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:12:13.874Z,1469783533.874 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:13:48.615Z,1469783628.615 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:15:15.053Z,1469783715.053 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:15:15.076Z,1469783715.076 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:15:50.662Z,1469783750.662 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:17:53.091Z,1469783873.091 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:18:16.066Z,1469783896.066 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:18:16.068Z,1469783896.068 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:19:36.666Z,1469783976.666 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T09:19:36.742Z,1469783976.742 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T09:19:55.894Z,1469783995.894 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:21:17.038Z,1469784077.038 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:21:17.040Z,1469784077.040 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:21:17.051Z,1469784077.051 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-07-29T09:21:17.052Z,1469784077.052 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-07-29T09:21:18.215Z,1469784078.215 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 691.803125 min 2016-07-29T09:21:58.031Z,1469784118.031 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:21:58.382Z,1469784118.382 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T09:31:36.543Z,1469784696.543 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 702.108659 min 2016-07-29T09:31:51.442Z,1469784711.442 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T09:33:58.307Z,1469784838.307 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:36:01.105Z,1469784961.105 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:38:03.195Z,1469785083.195 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:39:17.758Z,1469785157.758 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:39:17.760Z,1469785157.760 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:40:05.276Z,1469785205.276 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:40:06.486Z,1469785206.486 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2016-07-29T09:41:55.059Z,1469785315.059 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 712.415755 min 2016-07-29T09:42:07.654Z,1469785327.654 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:42:07.943Z,1469785327.943 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T09:42:10.293Z,1469785330.293 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T09:42:18.707Z,1469785338.707 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:42:18.709Z,1469785338.709 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:45:19.574Z,1469785519.574 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:45:19.582Z,1469785519.582 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:47:49.198Z,1469785669.198 [CBIT](IMPORTANT): Beginning GF scan 2016-07-29T09:48:20.515Z,1469785700.515 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:48:20.517Z,1469785700.517 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:51:21.544Z,1469785881.544 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:51:21.546Z,1469785881.546 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:52:13.131Z,1469785933.131 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 722.718945 min 2016-07-29T09:52:28.070Z,1469785948.070 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T09:54:08.408Z,1469786048.408 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:54:22.652Z,1469786062.652 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:54:22.670Z,1469786062.670 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:56:10.537Z,1469786170.537 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T09:57:23.524Z,1469786243.524 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:57:23.531Z,1469786243.531 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T09:58:12.711Z,1469786292.711 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:00:14.756Z,1469786414.756 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:00:24.582Z,1469786424.582 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:00:24.584Z,1469786424.584 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:02:16.833Z,1469786536.833 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:02:16.972Z,1469786536.972 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T10:02:31.817Z,1469786551.817 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 733.028646 min 2016-07-29T10:02:46.962Z,1469786566.962 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T10:03:25.397Z,1469786605.397 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:03:25.399Z,1469786605.399 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:06:26.484Z,1469786786.484 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:06:26.486Z,1469786786.486 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:09:27.332Z,1469786967.332 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:09:27.334Z,1469786967.334 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:12:28.457Z,1469787148.457 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:12:28.459Z,1469787148.459 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:12:49.697Z,1469787169.697 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 743.327799 min 2016-07-29T10:13:04.883Z,1469787184.883 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T10:13:04.915Z,1469787184.915 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T10:14:17.133Z,1469787257.133 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:15:29.527Z,1469787329.527 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:15:29.530Z,1469787329.530 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:16:19.928Z,1469787379.928 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:18:22.041Z,1469787502.041 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:18:30.645Z,1469787510.645 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:18:30.647Z,1469787510.647 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:20:24.079Z,1469787624.079 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:21:31.817Z,1469787691.817 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:21:31.820Z,1469787691.820 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:22:26.124Z,1469787746.124 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:22:26.385Z,1469787746.385 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T10:23:07.993Z,1469787787.993 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 753.632747 min 2016-07-29T10:24:32.935Z,1469787872.935 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:24:32.937Z,1469787872.937 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:25:17.632Z,1469787917.632 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T10:27:33.895Z,1469788053.895 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:27:33.897Z,1469788053.897 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:30:34.730Z,1469788234.730 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:30:34.732Z,1469788234.732 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:33:26.260Z,1469788406.260 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 763.936654 min 2016-07-29T10:33:35.592Z,1469788415.592 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:33:35.595Z,1469788415.595 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:34:29.553Z,1469788469.553 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:35:35.527Z,1469788535.527 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T10:36:31.671Z,1469788591.671 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:36:36.558Z,1469788596.558 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:36:36.560Z,1469788596.560 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:38:33.800Z,1469788713.800 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:39:37.514Z,1469788777.514 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:39:37.516Z,1469788777.516 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:40:36.698Z,1469788836.698 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:42:38.474Z,1469788958.474 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:42:38.476Z,1469788958.476 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:42:38.735Z,1469788958.735 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:42:38.887Z,1469788958.887 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T10:43:45.020Z,1469789025.020 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 774.248958 min 2016-07-29T10:45:39.642Z,1469789139.642 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:45:39.644Z,1469789139.644 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:45:53.285Z,1469789153.285 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T10:48:40.766Z,1469789320.766 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:48:40.768Z,1469789320.768 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:51:41.899Z,1469789501.899 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:51:41.901Z,1469789501.901 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:54:03.338Z,1469789643.338 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 784.554818 min 2016-07-29T10:54:38.972Z,1469789678.972 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:54:43.094Z,1469789683.094 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:54:43.096Z,1469789683.096 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:56:12.359Z,1469789772.359 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T10:56:41.082Z,1469789801.082 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T10:57:44.123Z,1469789864.123 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:57:44.125Z,1469789864.125 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T10:58:43.215Z,1469789923.215 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:00:45.074Z,1469790045.074 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:00:45.076Z,1469790045.076 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:00:45.264Z,1469790045.264 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:02:47.349Z,1469790167.349 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:02:47.724Z,1469790167.724 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T11:03:45.855Z,1469790225.855 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:03:45.857Z,1469790225.857 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:04:21.463Z,1469790261.463 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 794.857227 min 2016-07-29T11:06:31.495Z,1469790391.495 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T11:06:31.559Z,1469790391.559 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T11:06:46.715Z,1469790406.715 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:06:46.717Z,1469790406.717 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:09:47.850Z,1469790587.850 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:09:47.852Z,1469790587.852 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:12:48.800Z,1469790768.800 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:12:48.802Z,1469790768.802 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:14:39.723Z,1469790879.723 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 805.161133 min 2016-07-29T11:14:47.638Z,1469790887.638 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:15:49.980Z,1469790949.980 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:15:49.982Z,1469790949.982 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:16:49.968Z,1469791009.968 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:18:43.909Z,1469791123.909 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T11:18:51.136Z,1469791131.136 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:18:51.138Z,1469791131.138 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:18:52.085Z,1469791132.085 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:20:54.876Z,1469791254.876 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:21:52.083Z,1469791312.083 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:21:52.085Z,1469791312.085 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:22:56.956Z,1469791376.956 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:22:57.342Z,1469791377.342 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T11:24:52.874Z,1469791492.874 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:24:52.877Z,1469791492.877 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:25:05.594Z,1469791505.594 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 815.592513 min 2016-07-29T11:27:53.627Z,1469791673.627 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:27:53.630Z,1469791673.630 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:29:02.894Z,1469791742.894 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T11:30:54.610Z,1469791854.610 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:30:54.614Z,1469791854.614 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:33:55.731Z,1469792035.731 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:33:55.733Z,1469792035.733 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:34:57.726Z,1469792097.726 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:35:32.264Z,1469792132.264 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 826.037174 min 2016-07-29T11:36:56.921Z,1469792216.921 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:36:56.922Z,1469792216.922 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:36:59.928Z,1469792219.928 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:39:02.013Z,1469792342.013 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:39:22.848Z,1469792362.848 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T11:39:57.847Z,1469792397.847 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:39:57.849Z,1469792397.849 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:41:04.098Z,1469792464.098 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:42:58.961Z,1469792578.961 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:42:58.963Z,1469792578.963 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:43:06.212Z,1469792586.212 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:43:06.275Z,1469792586.275 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T11:45:50.732Z,1469792750.732 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 836.344336 min 2016-07-29T11:45:59.989Z,1469792759.989 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:45:59.991Z,1469792759.991 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:49:01.159Z,1469792941.159 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:49:01.161Z,1469792941.161 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:49:40.726Z,1469792980.726 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T11:52:02.223Z,1469793122.223 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:52:02.225Z,1469793122.225 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:55:03.369Z,1469793303.369 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:55:03.371Z,1469793303.371 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:55:06.608Z,1469793306.608 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:56:09.256Z,1469793369.256 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 846.653711 min 2016-07-29T11:57:09.339Z,1469793429.339 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T11:58:04.423Z,1469793484.423 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:58:04.429Z,1469793484.429 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T11:59:13.739Z,1469793553.739 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:00:00.654Z,1469793600.654 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T12:00:00.687Z,1469793600.687 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T12:01:05.486Z,1469793665.486 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:01:05.488Z,1469793665.488 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:01:15.837Z,1469793675.837 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:03:19.597Z,1469793799.597 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:03:19.896Z,1469793799.896 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T12:04:06.375Z,1469793846.375 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:04:06.377Z,1469793846.377 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:06:27.882Z,1469793987.882 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 856.964714 min 2016-07-29T12:07:07.555Z,1469794027.555 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:07:07.557Z,1469794027.557 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:10:08.716Z,1469794208.716 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:10:08.718Z,1469794208.718 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:12:13.148Z,1469794333.148 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T12:13:09.740Z,1469794389.740 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:13:09.742Z,1469794389.742 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:15:19.898Z,1469794519.898 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:16:10.618Z,1469794570.618 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:16:10.621Z,1469794570.621 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:16:45.860Z,1469794605.860 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 867.263802 min 2016-07-29T12:17:21.967Z,1469794641.967 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:19:11.532Z,1469794751.532 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:19:11.535Z,1469794751.535 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:19:24.016Z,1469794764.016 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:21:26.807Z,1469794886.807 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:22:12.519Z,1469794932.519 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:22:12.555Z,1469794932.555 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:22:30.892Z,1469794950.892 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T12:23:28.823Z,1469795008.823 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:23:29.135Z,1469795009.135 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T12:25:13.453Z,1469795113.453 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:25:13.460Z,1469795113.460 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:27:04.813Z,1469795224.813 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 877.578971 min 2016-07-29T12:28:14.700Z,1469795294.700 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:28:14.702Z,1469795294.702 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:31:15.678Z,1469795475.678 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:31:15.680Z,1469795475.680 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:32:49.775Z,1469795569.775 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T12:34:16.734Z,1469795656.734 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:34:16.753Z,1469795656.753 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:35:29.613Z,1469795729.613 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:37:17.745Z,1469795837.745 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:37:17.748Z,1469795837.748 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:37:22.979Z,1469795842.979 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 887.882292 min 2016-07-29T12:37:31.690Z,1469795851.690 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:39:34.488Z,1469795974.488 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:40:18.584Z,1469796018.584 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:40:18.613Z,1469796018.613 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:41:36.602Z,1469796096.602 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:43:07.949Z,1469796187.949 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T12:43:19.582Z,1469796199.582 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:43:19.583Z,1469796199.583 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:43:38.615Z,1469796218.615 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:43:38.825Z,1469796218.825 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T12:46:20.425Z,1469796380.425 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:46:20.427Z,1469796380.427 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:47:41.675Z,1469796461.675 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 898.194010 min 2016-07-29T12:49:21.597Z,1469796561.597 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:49:21.599Z,1469796561.599 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:52:22.413Z,1469796742.413 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:52:22.415Z,1469796742.415 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:53:25.992Z,1469796805.992 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T12:53:26.027Z,1469796806.027 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T12:55:23.388Z,1469796923.388 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:55:23.390Z,1469796923.390 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:55:39.285Z,1469796939.285 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:57:41.390Z,1469797061.390 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T12:58:00.144Z,1469797080.144 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 908.500391 min 2016-07-29T12:58:24.217Z,1469797104.217 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:58:24.219Z,1469797104.219 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T12:59:44.172Z,1469797184.172 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:01:25.231Z,1469797285.231 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:01:25.238Z,1469797285.238 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:01:46.478Z,1469797306.478 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:03:48.519Z,1469797428.519 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:03:48.684Z,1469797428.684 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T13:04:26.393Z,1469797466.393 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:04:26.395Z,1469797466.395 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:05:38.668Z,1469797538.668 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T13:07:27.423Z,1469797647.423 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:07:27.425Z,1469797647.425 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:08:18.627Z,1469797698.627 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 918.810352 min 2016-07-29T13:10:28.313Z,1469797828.313 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:10:28.315Z,1469797828.315 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:13:29.480Z,1469798009.480 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:13:29.482Z,1469798009.482 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:15:49.228Z,1469798149.228 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:15:57.479Z,1469798157.479 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T13:16:30.326Z,1469798190.326 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:16:30.328Z,1469798190.328 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:17:52.031Z,1469798272.031 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:18:37.430Z,1469798317.430 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 929.122786 min 2016-07-29T13:19:31.157Z,1469798371.157 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:19:31.159Z,1469798371.159 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:19:54.096Z,1469798394.096 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:21:56.250Z,1469798516.250 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:22:32.072Z,1469798552.072 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:22:32.074Z,1469798552.074 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:23:58.314Z,1469798638.314 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:23:58.371Z,1469798638.371 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T13:25:33.083Z,1469798733.083 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:25:33.085Z,1469798733.085 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:26:15.236Z,1469798775.236 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T13:28:33.928Z,1469798913.928 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:28:33.930Z,1469798913.930 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:28:55.921Z,1469798935.921 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 939.431510 min 2016-07-29T13:31:34.762Z,1469799094.762 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:31:34.764Z,1469799094.764 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:34:35.844Z,1469799275.844 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:34:35.846Z,1469799275.846 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:36:01.167Z,1469799361.167 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:36:33.127Z,1469799393.127 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T13:37:36.880Z,1469799456.880 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:37:36.882Z,1469799456.882 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:38:03.261Z,1469799483.261 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:39:14.980Z,1469799554.980 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 949.749089 min 2016-07-29T13:40:05.302Z,1469799605.302 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:40:37.738Z,1469799637.738 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:40:37.739Z,1469799637.739 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:42:07.628Z,1469799727.628 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:43:38.525Z,1469799818.525 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:43:38.527Z,1469799818.527 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:44:09.689Z,1469799849.689 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:44:09.768Z,1469799849.768 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T13:46:39.493Z,1469799999.493 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:46:39.513Z,1469799999.513 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:46:50.621Z,1469800010.621 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T13:46:50.725Z,1469800010.725 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T13:49:33.707Z,1469800173.707 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 960.060547 min 2016-07-29T13:49:40.577Z,1469800180.577 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:49:40.579Z,1469800180.579 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:52:41.696Z,1469800361.696 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:52:41.698Z,1469800361.698 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:55:42.529Z,1469800542.529 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:55:42.532Z,1469800542.532 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:56:09.962Z,1469800569.962 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:58:11.983Z,1469800691.983 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T13:58:43.712Z,1469800723.712 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:58:43.714Z,1469800723.714 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T13:59:03.396Z,1469800743.396 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T13:59:55.482Z,1469800795.482 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 970.423958 min 2016-07-29T14:00:14.072Z,1469800814.072 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:01:44.574Z,1469800904.574 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:01:44.577Z,1469800904.577 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:02:16.410Z,1469800936.410 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:04:19.204Z,1469801059.204 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:04:19.485Z,1469801059.485 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T14:04:45.445Z,1469801085.445 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:04:45.447Z,1469801085.447 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:07:46.544Z,1469801266.544 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:07:46.546Z,1469801266.546 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:09:22.213Z,1469801362.213 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T14:10:23.553Z,1469801423.553 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 980.892187 min 2016-07-29T14:10:47.660Z,1469801447.660 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:10:47.662Z,1469801447.662 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:13:48.872Z,1469801628.872 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:13:48.874Z,1469801628.874 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:16:19.432Z,1469801779.432 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:16:49.950Z,1469801809.950 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:16:49.952Z,1469801809.952 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:18:22.239Z,1469801902.239 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:19:40.133Z,1469801980.133 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T14:19:50.756Z,1469801990.756 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:19:50.765Z,1469801990.765 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:20:24.300Z,1469802024.300 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:20:41.980Z,1469802041.980 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 991.198503 min 2016-07-29T14:22:26.374Z,1469802146.374 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:22:51.650Z,1469802171.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:22:51.652Z,1469802171.652 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:24:28.390Z,1469802268.390 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:24:28.654Z,1469802268.654 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T14:25:52.676Z,1469802352.676 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:25:52.678Z,1469802352.678 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:28:53.776Z,1469802533.776 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:28:53.778Z,1469802533.778 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:29:59.022Z,1469802599.022 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T14:31:00.411Z,1469802660.411 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1001.506250 min 2016-07-29T14:31:54.920Z,1469802714.920 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:31:54.922Z,1469802714.922 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:34:55.798Z,1469802895.798 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:34:55.804Z,1469802895.804 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:36:28.639Z,1469802988.639 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:37:56.830Z,1469803076.830 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:37:56.833Z,1469803076.833 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:37:56.844Z,1469803076.844 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-07-29T14:37:56.845Z,1469803076.845 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-07-29T14:38:30.700Z,1469803110.700 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:40:18.242Z,1469803218.242 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T14:40:18.354Z,1469803218.354 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T14:40:32.734Z,1469803232.734 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:41:18.604Z,1469803278.604 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1011.809440 min 2016-07-29T14:42:35.537Z,1469803355.537 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:44:37.605Z,1469803477.605 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:44:37.911Z,1469803477.911 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T14:51:37.317Z,1469803897.317 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1022.122135 min 2016-07-29T14:52:30.625Z,1469803950.625 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T14:55:57.524Z,1469804157.524 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:55:57.526Z,1469804157.526 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:56:37.910Z,1469804197.910 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:58:42.051Z,1469804322.051 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T14:58:58.957Z,1469804338.957 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T14:58:58.959Z,1469804338.959 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:00:44.176Z,1469804444.176 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:01:55.972Z,1469804515.972 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1032.431771 min 2016-07-29T15:01:59.580Z,1469804519.580 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:01:59.582Z,1469804519.582 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:02:46.209Z,1469804566.209 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:02:48.407Z,1469804568.407 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T15:04:49.004Z,1469804689.004 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:04:49.282Z,1469804689.282 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T15:05:01.333Z,1469804701.333 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:05:01.335Z,1469804701.335 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:08:02.133Z,1469804882.133 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:08:02.135Z,1469804882.135 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:11:02.975Z,1469805062.975 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:11:02.977Z,1469805062.977 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:12:14.643Z,1469805134.643 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1042.744076 min 2016-07-29T15:13:07.511Z,1469805187.511 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T15:14:04.087Z,1469805244.087 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:14:04.089Z,1469805244.089 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:16:49.677Z,1469805409.677 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:17:05.159Z,1469805425.159 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:17:05.161Z,1469805425.161 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:18:51.711Z,1469805531.711 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:20:06.297Z,1469805606.297 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:20:06.303Z,1469805606.303 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:20:53.752Z,1469805653.752 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:22:33.294Z,1469805753.294 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1053.054297 min 2016-07-29T15:22:55.833Z,1469805775.833 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:23:07.453Z,1469805787.453 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:23:07.455Z,1469805787.455 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:23:24.962Z,1469805804.962 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T15:24:58.631Z,1469805898.631 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:24:58.926Z,1469805898.926 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T15:26:08.271Z,1469805968.271 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:26:08.273Z,1469805968.273 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:29:09.288Z,1469806149.288 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:29:09.290Z,1469806149.290 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:32:10.503Z,1469806330.503 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:32:10.505Z,1469806330.505 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:32:51.674Z,1469806371.674 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1063.360612 min 2016-07-29T15:33:43.735Z,1469806423.735 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T15:33:43.817Z,1469806423.817 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T15:35:11.332Z,1469806511.332 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:35:11.334Z,1469806511.334 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:36:59.396Z,1469806619.396 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:38:12.309Z,1469806692.309 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:38:12.311Z,1469806692.311 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:39:01.518Z,1469806741.518 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:41:03.615Z,1469806863.615 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:41:13.347Z,1469806873.347 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:41:13.349Z,1469806873.349 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:43:05.684Z,1469806985.684 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:43:09.898Z,1469806989.898 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1073.664388 min 2016-07-29T15:44:13.940Z,1469807053.940 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:44:13.942Z,1469807053.942 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:45:07.774Z,1469807107.774 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:45:08.091Z,1469807108.091 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T15:45:58.730Z,1469807158.730 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T15:47:14.508Z,1469807234.508 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:47:14.539Z,1469807234.539 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:48:17.133Z,1469807297.133 [CBIT](IMPORTANT): Beginning GF scan 2016-07-29T15:50:15.101Z,1469807415.101 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:50:15.109Z,1469807415.109 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:53:16.136Z,1469807596.136 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:53:16.137Z,1469807596.137 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:53:28.559Z,1469807608.559 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1083.975260 min 2016-07-29T15:56:16.799Z,1469807776.799 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T15:56:17.269Z,1469807777.269 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:56:17.271Z,1469807777.271 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:57:08.367Z,1469807828.367 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:59:10.456Z,1469807950.456 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T15:59:18.180Z,1469807958.180 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T15:59:18.183Z,1469807958.183 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:01:12.582Z,1469808072.582 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:02:19.191Z,1469808139.191 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:02:19.194Z,1469808139.194 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:03:14.702Z,1469808194.702 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:03:47.008Z,1469808227.008 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1094.282292 min 2016-07-29T16:05:17.489Z,1469808317.489 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:05:17.538Z,1469808317.538 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T16:05:20.334Z,1469808320.334 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:05:20.336Z,1469808320.336 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:06:35.586Z,1469808395.586 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T16:08:21.417Z,1469808501.417 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:08:21.435Z,1469808501.435 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:11:22.441Z,1469808682.441 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:11:22.460Z,1469808682.460 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:14:05.109Z,1469808845.109 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1104.583984 min 2016-07-29T16:14:23.578Z,1469808863.578 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:14:23.610Z,1469808863.610 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:16:54.336Z,1469809014.336 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T16:17:18.323Z,1469809038.323 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:17:24.620Z,1469809044.620 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:17:24.627Z,1469809044.627 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:19:20.392Z,1469809160.392 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:20:25.555Z,1469809225.555 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:20:25.573Z,1469809225.573 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:21:25.326Z,1469809285.326 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:23:26.655Z,1469809406.655 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:23:26.657Z,1469809406.657 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:23:27.459Z,1469809407.459 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:24:31.611Z,1469809471.611 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1114.980208 min 2016-07-29T16:25:31.980Z,1469809531.980 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:25:32.167Z,1469809532.167 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T16:26:27.737Z,1469809587.737 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:26:27.739Z,1469809587.739 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:27:12.202Z,1469809632.202 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T16:27:12.279Z,1469809632.279 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T16:29:28.889Z,1469809768.889 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:29:28.892Z,1469809768.892 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:32:32.280Z,1469809952.280 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:32:32.282Z,1469809952.282 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:34:56.188Z,1469810096.188 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1125.435026 min 2016-07-29T16:35:33.257Z,1469810133.257 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:35:33.259Z,1469810133.259 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:37:32.445Z,1469810252.445 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:38:34.061Z,1469810314.061 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:38:34.063Z,1469810314.063 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:39:27.337Z,1469810367.337 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T16:39:35.244Z,1469810375.244 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:41:35.167Z,1469810495.167 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:41:35.169Z,1469810495.169 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:41:37.341Z,1469810497.341 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:43:39.418Z,1469810619.418 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:44:35.961Z,1469810675.961 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:44:35.978Z,1469810675.978 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:45:22.758Z,1469810722.758 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1135.879297 min 2016-07-29T16:45:41.483Z,1469810741.483 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:45:41.678Z,1469810741.678 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T16:47:37.039Z,1469810857.039 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:47:37.041Z,1469810857.041 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:49:46.409Z,1469810986.409 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T16:50:38.089Z,1469811038.089 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:50:38.108Z,1469811038.108 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:53:40.155Z,1469811220.155 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:53:40.157Z,1469811220.157 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:55:44.002Z,1469811344.002 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1146.185156 min 2016-07-29T16:56:44.106Z,1469811404.106 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:56:44.109Z,1469811404.109 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:57:44.231Z,1469811464.231 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T16:59:44.617Z,1469811584.617 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:59:44.620Z,1469811584.620 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T16:59:46.349Z,1469811586.349 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:00:03.749Z,1469811603.749 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T17:01:48.671Z,1469811708.671 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:02:45.441Z,1469811765.441 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:02:45.460Z,1469811765.460 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:03:50.756Z,1469811830.756 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:05:46.529Z,1469811946.529 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:05:46.548Z,1469811946.548 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:05:52.777Z,1469811952.777 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:05:52.974Z,1469811952.974 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T17:06:03.748Z,1469811963.748 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1156.561328 min 2016-07-29T17:08:47.314Z,1469812127.314 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:08:47.337Z,1469812127.337 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:10:21.732Z,1469812221.732 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T17:11:48.499Z,1469812308.499 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:11:48.521Z,1469812308.521 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:14:49.590Z,1469812489.590 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:14:49.592Z,1469812489.592 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:16:22.349Z,1469812582.349 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1166.871875 min 2016-07-29T17:17:50.671Z,1469812670.671 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:17:50.673Z,1469812670.673 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:17:53.583Z,1469812673.583 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:19:55.596Z,1469812795.596 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:20:39.866Z,1469812839.866 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T17:20:39.928Z,1469812839.928 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T17:20:51.490Z,1469812851.490 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:20:51.494Z,1469812851.494 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:21:57.785Z,1469812917.785 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:23:52.569Z,1469813032.569 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:23:52.598Z,1469813032.598 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:23:59.906Z,1469813039.906 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:26:02.689Z,1469813162.689 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:26:02.817Z,1469813162.817 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T17:26:40.824Z,1469813200.824 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1177.179297 min 2016-07-29T17:26:53.737Z,1469813213.737 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:26:53.739Z,1469813213.739 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:29:54.870Z,1469813394.870 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:29:54.872Z,1469813394.872 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:32:52.766Z,1469813572.766 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T17:32:55.608Z,1469813575.608 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:32:55.614Z,1469813575.614 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:35:56.724Z,1469813756.724 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:35:56.726Z,1469813756.726 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:36:58.792Z,1469813818.792 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1187.479948 min 2016-07-29T17:38:03.138Z,1469813883.138 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:38:57.793Z,1469813937.793 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:38:57.795Z,1469813937.795 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:40:05.925Z,1469814005.925 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:41:58.662Z,1469814118.662 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:41:58.664Z,1469814118.664 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:42:08.239Z,1469814128.239 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:43:10.609Z,1469814190.609 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T17:44:10.259Z,1469814250.259 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:44:59.678Z,1469814299.678 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:44:59.680Z,1469814299.680 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:46:12.373Z,1469814372.373 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T17:46:12.755Z,1469814372.755 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T17:47:17.287Z,1469814437.287 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1197.787630 min 2016-07-29T17:48:00.526Z,1469814480.526 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:48:00.528Z,1469814480.528 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:51:01.450Z,1469814661.450 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:51:01.452Z,1469814661.452 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:53:28.381Z,1469814808.381 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T17:54:02.556Z,1469814842.556 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:54:02.558Z,1469814842.558 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:57:03.721Z,1469815023.721 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:57:03.723Z,1469815023.723 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T17:57:35.719Z,1469815055.719 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1208.094792 min 2016-07-29T17:58:12.854Z,1469815092.854 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:00:04.883Z,1469815204.883 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:00:04.889Z,1469815204.889 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:00:14.951Z,1469815214.951 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:02:17.304Z,1469815337.304 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:03:05.897Z,1469815385.897 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:03:05.899Z,1469815385.899 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:03:46.276Z,1469815426.276 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T18:04:19.334Z,1469815459.334 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:06:06.989Z,1469815566.989 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:06:06.991Z,1469815566.991 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:06:21.347Z,1469815581.347 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:06:21.434Z,1469815581.434 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T18:07:53.927Z,1469815673.927 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1218.398177 min 2016-07-29T18:09:08.080Z,1469815748.080 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:09:08.082Z,1469815748.082 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:12:09.193Z,1469815929.193 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:12:09.211Z,1469815929.211 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:14:05.080Z,1469816045.080 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T18:14:05.151Z,1469816045.151 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T18:15:10.068Z,1469816110.068 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:15:10.070Z,1469816110.070 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:18:11.232Z,1469816291.232 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:18:11.234Z,1469816291.234 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:18:12.054Z,1469816292.054 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1228.699609 min 2016-07-29T18:18:21.724Z,1469816301.724 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:20:23.821Z,1469816423.821 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:21:12.294Z,1469816472.294 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:21:12.296Z,1469816472.296 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:22:25.938Z,1469816545.938 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:24:15.971Z,1469816655.971 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:24:15.973Z,1469816655.973 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:24:28.725Z,1469816668.725 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:26:17.328Z,1469816777.328 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T18:26:33.646Z,1469816793.646 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:26:33.922Z,1469816793.922 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T18:27:17.092Z,1469816837.092 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:27:17.111Z,1469816837.111 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:28:30.367Z,1469816910.367 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1239.005469 min 2016-07-29T18:30:18.227Z,1469817018.227 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:30:18.229Z,1469817018.229 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:33:19.106Z,1469817199.106 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:33:19.109Z,1469817199.109 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:36:20.121Z,1469817380.121 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:36:20.122Z,1469817380.122 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:36:36.075Z,1469817396.075 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T18:38:33.979Z,1469817513.979 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:38:48.714Z,1469817528.714 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1249.311979 min 2016-07-29T18:39:21.229Z,1469817561.229 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:39:21.231Z,1469817561.231 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:40:36.770Z,1469817636.770 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:42:22.251Z,1469817742.251 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:42:22.253Z,1469817742.253 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:42:38.903Z,1469817758.903 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:44:40.992Z,1469817880.992 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:45:23.200Z,1469817923.200 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:45:23.207Z,1469817923.207 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:46:43.185Z,1469818003.185 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:46:43.305Z,1469818003.305 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T18:46:54.020Z,1469818014.020 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T18:48:24.287Z,1469818104.287 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:48:24.289Z,1469818104.289 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:49:07.094Z,1469818147.094 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1259.617448 min 2016-07-29T18:51:25.278Z,1469818285.278 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:51:25.280Z,1469818285.280 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:54:27.593Z,1469818467.593 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:54:27.626Z,1469818467.626 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:57:11.768Z,1469818631.768 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T18:57:28.693Z,1469818648.693 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:57:28.699Z,1469818648.699 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T18:58:43.595Z,1469818723.595 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T18:59:25.279Z,1469818765.279 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1269.920833 min 2016-07-29T19:00:29.427Z,1469818829.427 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:00:29.429Z,1469818829.429 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:00:45.736Z,1469818845.736 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:02:47.853Z,1469818967.853 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:03:30.297Z,1469819010.297 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:03:30.300Z,1469819010.300 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:04:50.636Z,1469819090.636 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:06:31.384Z,1469819191.384 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:06:31.386Z,1469819191.386 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:06:52.933Z,1469819212.933 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:06:53.131Z,1469819213.131 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T19:07:31.867Z,1469819251.867 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T19:07:31.943Z,1469819251.943 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T19:09:32.532Z,1469819372.532 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:09:32.535Z,1469819372.535 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:09:43.743Z,1469819383.743 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1280.229687 min 2016-07-29T19:12:33.531Z,1469819553.531 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:12:33.535Z,1469819553.535 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:15:34.732Z,1469819734.732 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:15:34.734Z,1469819734.734 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:18:35.741Z,1469819915.741 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:18:35.743Z,1469819915.743 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:18:53.266Z,1469819933.266 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:19:49.419Z,1469819989.419 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T19:20:17.326Z,1469820017.326 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1290.684635 min 2016-07-29T19:20:55.387Z,1469820055.387 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:21:36.793Z,1469820096.793 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:21:36.795Z,1469820096.795 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:22:57.476Z,1469820177.476 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:24:37.893Z,1469820277.893 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:24:37.895Z,1469820277.895 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:24:59.489Z,1469820299.489 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:27:01.964Z,1469820421.964 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:27:02.127Z,1469820422.127 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T19:27:38.851Z,1469820458.851 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:27:38.853Z,1469820458.853 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:30:08.495Z,1469820608.495 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T19:30:39.764Z,1469820639.764 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:30:39.766Z,1469820639.766 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:30:42.932Z,1469820642.932 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1301.214844 min 2016-07-29T19:33:40.928Z,1469820820.928 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:33:40.930Z,1469820820.930 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:36:41.829Z,1469821001.829 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:36:41.836Z,1469821001.836 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:39:04.399Z,1469821144.399 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:39:42.658Z,1469821182.658 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:39:42.660Z,1469821182.660 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:40:27.415Z,1469821227.415 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T19:41:01.048Z,1469821261.048 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1311.517578 min 2016-07-29T19:41:06.421Z,1469821266.421 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:42:43.702Z,1469821363.702 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:42:43.705Z,1469821363.705 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:43:09.223Z,1469821389.223 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:45:11.309Z,1469821511.309 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:45:44.708Z,1469821544.708 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:45:44.711Z,1469821544.711 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:47:13.690Z,1469821633.690 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T19:47:13.979Z,1469821633.979 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T19:48:45.811Z,1469821725.811 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:48:45.813Z,1469821725.813 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:50:46.526Z,1469821846.526 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T19:51:19.391Z,1469821879.391 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1321.822135 min 2016-07-29T19:51:46.723Z,1469821906.723 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:51:46.725Z,1469821906.725 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:54:47.822Z,1469822087.822 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:54:47.824Z,1469822087.824 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T19:54:47.921Z,1469822087.921 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-07-29T19:54:47.922Z,1469822087.922 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-07-29T19:59:14.139Z,1469822354.139 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:01:06.341Z,1469822466.341 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T20:01:06.373Z,1469822466.373 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T20:01:16.197Z,1469822476.197 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:01:37.972Z,1469822497.972 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1332.132422 min 2016-07-29T20:03:18.358Z,1469822598.358 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:05:20.403Z,1469822720.403 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:07:22.753Z,1469822842.753 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:07:23.047Z,1469822843.047 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T20:11:56.198Z,1469823116.198 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1342.436068 min 2016-07-29T20:12:48.697Z,1469823168.697 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:12:48.699Z,1469823168.699 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:13:20.357Z,1469823200.357 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T20:15:49.805Z,1469823349.805 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:15:49.807Z,1469823349.807 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:18:50.857Z,1469823530.857 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:18:50.859Z,1469823530.859 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:19:23.446Z,1469823563.446 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:21:26.237Z,1469823686.237 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:21:51.941Z,1469823711.941 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:21:51.943Z,1469823711.943 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:22:14.337Z,1469823734.337 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1352.739193 min 2016-07-29T20:23:28.350Z,1469823808.350 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:23:40.138Z,1469823820.138 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T20:24:52.785Z,1469823892.785 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:24:52.788Z,1469823892.788 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:25:31.144Z,1469823931.144 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:27:33.269Z,1469824053.269 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:27:35.081Z,1469824055.081 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T20:27:53.940Z,1469824073.940 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:27:53.942Z,1469824073.942 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:30:54.772Z,1469824254.772 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:30:54.774Z,1469824254.774 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:32:32.897Z,1469824352.897 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1363.047656 min 2016-07-29T20:33:55.909Z,1469824435.909 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:33:55.911Z,1469824435.911 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:33:59.033Z,1469824439.033 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T20:36:56.996Z,1469824616.996 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:36:56.998Z,1469824616.998 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:39:33.522Z,1469824773.522 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:39:57.937Z,1469824797.937 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:39:57.939Z,1469824797.939 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:41:35.544Z,1469824895.544 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:42:51.158Z,1469824971.158 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1373.351953 min 2016-07-29T20:42:58.522Z,1469824978.522 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:42:58.524Z,1469824978.524 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:43:38.346Z,1469825018.346 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:44:17.817Z,1469825057.817 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T20:45:40.375Z,1469825140.375 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:45:59.671Z,1469825159.671 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:45:59.673Z,1469825159.673 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:47:42.392Z,1469825262.392 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T20:47:42.667Z,1469825262.667 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T20:49:00.739Z,1469825340.739 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:49:00.741Z,1469825340.741 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:52:01.854Z,1469825521.854 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:52:01.856Z,1469825521.856 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:53:09.637Z,1469825589.637 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1383.660286 min 2016-07-29T20:54:36.585Z,1469825676.585 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T20:54:36.648Z,1469825676.648 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T20:55:03.018Z,1469825703.018 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:55:03.020Z,1469825703.020 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:58:04.096Z,1469825884.096 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:58:04.098Z,1469825884.098 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T20:59:42.685Z,1469825982.685 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:01:05.270Z,1469826065.270 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:01:05.272Z,1469826065.272 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:01:44.891Z,1469826104.891 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:03:27.876Z,1469826207.876 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1393.965234 min 2016-07-29T21:03:47.011Z,1469826227.011 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:04:06.401Z,1469826246.401 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:04:06.403Z,1469826246.403 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:05:49.105Z,1469826349.105 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:06:48.793Z,1469826408.793 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T21:07:07.213Z,1469826427.213 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:07:07.215Z,1469826427.215 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:07:51.170Z,1469826471.170 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:07:51.333Z,1469826471.333 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T21:10:08.390Z,1469826608.390 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:10:08.396Z,1469826608.396 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:13:09.573Z,1469826789.573 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:13:09.575Z,1469826789.575 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:13:46.380Z,1469826826.380 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1404.273177 min 2016-07-29T21:16:10.478Z,1469826970.478 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:16:10.481Z,1469826970.481 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:17:06.906Z,1469827026.906 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T21:19:12.013Z,1469827152.013 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:19:12.015Z,1469827152.015 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:19:51.912Z,1469827191.912 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:21:54.133Z,1469827314.133 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:22:12.986Z,1469827332.986 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:22:12.988Z,1469827332.988 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:23:56.239Z,1469827436.239 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:24:09.600Z,1469827449.600 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1414.659375 min 2016-07-29T21:25:16.861Z,1469827516.861 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:25:16.863Z,1469827516.863 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:25:58.308Z,1469827558.308 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:27:24.825Z,1469827644.825 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T21:28:01.111Z,1469827681.111 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:28:01.267Z,1469827681.267 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T21:28:17.811Z,1469827697.811 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:28:17.813Z,1469827697.813 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:31:18.933Z,1469827878.933 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:31:18.935Z,1469827878.935 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:34:19.750Z,1469828059.750 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:34:19.752Z,1469828059.752 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:34:28.144Z,1469828068.144 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1424.969792 min 2016-07-29T21:37:20.801Z,1469828240.801 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:37:20.803Z,1469828240.803 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:37:43.634Z,1469828263.634 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T21:40:01.456Z,1469828401.456 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:40:21.740Z,1469828421.740 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:40:21.743Z,1469828421.743 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:42:03.788Z,1469828523.788 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:43:22.920Z,1469828602.920 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:43:22.922Z,1469828602.922 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:44:05.886Z,1469828645.886 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:44:47.069Z,1469828687.069 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1435.283984 min 2016-07-29T21:46:07.924Z,1469828767.924 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:46:24.028Z,1469828784.028 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:46:24.031Z,1469828784.031 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:48:00.973Z,1469828880.973 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T21:48:01.044Z,1469828881.044 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T21:48:10.052Z,1469828890.052 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T21:48:10.219Z,1469828890.219 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T21:48:47.016Z,1469828927.016 [CBIT](IMPORTANT): Beginning GF scan 2016-07-29T21:49:25.127Z,1469828965.127 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:49:25.129Z,1469828965.129 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:52:26.157Z,1469829146.157 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:52:26.179Z,1469829146.179 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:55:22.637Z,1469829322.637 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1445.773958 min 2016-07-29T21:55:27.191Z,1469829327.191 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:55:27.194Z,1469829327.194 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:58:28.347Z,1469829508.347 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T21:58:28.349Z,1469829508.349 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:00:10.414Z,1469829610.414 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:00:23.440Z,1469829623.440 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T22:01:29.432Z,1469829689.432 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:01:29.434Z,1469829689.434 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:02:12.746Z,1469829732.746 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:04:14.824Z,1469829854.824 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:04:30.626Z,1469829870.626 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:04:30.628Z,1469829870.628 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:05:45.376Z,1469829945.376 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1456.255859 min 2016-07-29T22:06:16.853Z,1469829976.853 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:07:31.627Z,1469830051.627 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:07:31.629Z,1469830051.629 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:08:18.951Z,1469830098.951 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:08:18.969Z,1469830098.969 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T22:10:32.493Z,1469830232.493 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:10:32.499Z,1469830232.499 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:10:44.867Z,1469830244.867 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T22:13:33.585Z,1469830413.585 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:13:33.587Z,1469830413.587 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:16:04.020Z,1469830564.020 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1466.566797 min 2016-07-29T22:16:34.524Z,1469830594.524 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:16:34.526Z,1469830594.526 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:19:35.503Z,1469830775.503 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:19:35.505Z,1469830775.505 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:20:19.408Z,1469830819.408 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:21:03.650Z,1469830863.650 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T22:22:21.729Z,1469830941.729 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:22:36.378Z,1469830956.378 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:22:36.380Z,1469830956.380 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:24:26.115Z,1469831066.115 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:25:37.477Z,1469831137.477 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:25:37.479Z,1469831137.479 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:26:22.310Z,1469831182.310 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1476.871224 min 2016-07-29T22:26:28.168Z,1469831188.168 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:28:30.180Z,1469831310.180 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:28:30.285Z,1469831310.285 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T22:28:38.292Z,1469831318.292 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:28:38.295Z,1469831318.295 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:31:26.872Z,1469831486.872 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T22:31:39.449Z,1469831499.449 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:31:39.455Z,1469831499.455 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:34:43.398Z,1469831683.398 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:34:43.400Z,1469831683.400 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:36:40.373Z,1469831800.373 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1487.172396 min 2016-07-29T22:37:44.113Z,1469831864.113 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:37:44.115Z,1469831864.115 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:40:30.963Z,1469832030.963 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:40:45.247Z,1469832045.247 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:40:45.265Z,1469832045.265 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:41:45.227Z,1469832105.227 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T22:41:45.284Z,1469832105.284 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T22:42:33.099Z,1469832153.099 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:43:46.231Z,1469832226.231 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:43:46.233Z,1469832226.233 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:44:35.161Z,1469832275.161 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:46:37.250Z,1469832397.250 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:46:47.148Z,1469832407.148 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:46:47.152Z,1469832407.152 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:46:58.780Z,1469832418.780 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1497.478385 min 2016-07-29T22:48:39.263Z,1469832519.263 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T22:48:39.396Z,1469832519.396 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T22:49:48.324Z,1469832588.324 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:49:48.326Z,1469832588.326 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:52:49.222Z,1469832769.222 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:52:49.228Z,1469832769.228 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:53:59.371Z,1469832839.371 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T22:55:50.250Z,1469832950.250 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:55:50.252Z,1469832950.252 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:57:17.187Z,1469833037.187 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1507.784896 min 2016-07-29T22:58:51.323Z,1469833131.323 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T22:58:51.326Z,1469833131.326 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:00:39.560Z,1469833239.560 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:01:52.290Z,1469833312.290 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:01:52.292Z,1469833312.292 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:02:41.674Z,1469833361.674 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:04:20.484Z,1469833460.484 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T23:04:44.460Z,1469833484.460 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:04:53.128Z,1469833493.128 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:04:53.138Z,1469833493.138 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:06:46.750Z,1469833606.750 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:07:35.701Z,1469833655.701 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1518.095443 min 2016-07-29T23:07:54.203Z,1469833674.203 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:07:54.205Z,1469833674.205 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:08:48.910Z,1469833728.910 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:08:49.154Z,1469833729.154 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T23:10:55.381Z,1469833855.381 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:10:55.383Z,1469833855.383 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:13:56.812Z,1469834036.812 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:13:56.814Z,1469834036.814 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:14:41.243Z,1469834081.243 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T23:16:57.314Z,1469834217.314 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:16:57.316Z,1469834217.316 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:17:54.251Z,1469834274.251 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1528.402865 min 2016-07-29T23:19:59.217Z,1469834399.217 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:19:59.219Z,1469834399.219 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:20:49.668Z,1469834449.668 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:22:51.825Z,1469834571.825 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:22:59.911Z,1469834579.911 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:22:59.915Z,1469834579.915 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:24:53.964Z,1469834693.964 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:25:01.400Z,1469834701.400 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T23:26:01.454Z,1469834761.454 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:26:01.460Z,1469834761.460 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:26:56.144Z,1469834816.144 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:28:12.896Z,1469834892.896 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1538.713672 min 2016-07-29T23:28:58.173Z,1469834938.173 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:28:58.244Z,1469834938.244 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T23:29:02.572Z,1469834942.572 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:29:02.574Z,1469834942.574 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:32:03.458Z,1469835123.458 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:32:03.460Z,1469835123.460 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:35:04.383Z,1469835304.383 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:35:04.386Z,1469835304.386 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:35:22.323Z,1469835322.323 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T23:35:22.471Z,1469835322.471 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-29T23:38:05.470Z,1469835485.470 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:38:05.472Z,1469835485.472 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:38:31.467Z,1469835511.467 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1549.023958 min 2016-07-29T23:40:58.963Z,1469835658.963 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:41:06.305Z,1469835666.305 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:41:06.307Z,1469835666.307 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:43:01.088Z,1469835781.088 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:44:07.262Z,1469835847.262 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:44:07.264Z,1469835847.264 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:45:03.879Z,1469835903.879 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:47:06.613Z,1469836026.613 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:47:08.447Z,1469836028.447 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:47:08.450Z,1469836028.450 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:47:36.406Z,1469836056.406 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T23:48:55.026Z,1469836135.026 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1559.416276 min 2016-07-29T23:49:08.674Z,1469836148.674 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-29T23:49:08.727Z,1469836148.727 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-29T23:50:09.505Z,1469836209.505 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:50:09.507Z,1469836209.507 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:53:10.539Z,1469836390.539 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:53:10.541Z,1469836390.541 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:56:11.596Z,1469836571.596 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:56:11.598Z,1469836571.598 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:57:54.165Z,1469836674.165 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-29T23:59:12.687Z,1469836752.687 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:59:12.689Z,1469836752.689 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-29T23:59:13.555Z,1469836753.555 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1569.725130 min 2016-07-30T00:01:09.135Z,1469836869.135 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:02:13.799Z,1469836933.799 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:02:13.801Z,1469836933.801 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:03:11.276Z,1469836991.276 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:05:13.402Z,1469837113.402 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:05:17.582Z,1469837117.582 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:05:17.584Z,1469837117.584 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:07:15.708Z,1469837235.708 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:08:11.949Z,1469837291.949 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T00:08:18.776Z,1469837298.776 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:08:18.778Z,1469837298.778 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:09:17.801Z,1469837357.801 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:09:18.148Z,1469837358.148 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T00:09:32.102Z,1469837372.102 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1580.035286 min 2016-07-30T00:11:19.900Z,1469837479.900 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:11:19.902Z,1469837479.902 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:14:21.018Z,1469837661.018 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:14:21.020Z,1469837661.020 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:17:22.088Z,1469837842.088 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:17:22.090Z,1469837842.090 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:18:29.734Z,1469837909.734 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T00:19:58.849Z,1469837998.849 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1590.386068 min 2016-07-30T00:20:22.968Z,1469838022.968 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:20:22.975Z,1469838022.975 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:21:18.038Z,1469838078.038 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:23:20.102Z,1469838200.102 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:23:23.995Z,1469838203.995 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:23:24.013Z,1469838204.013 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:25:22.881Z,1469838322.881 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:26:25.053Z,1469838385.053 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:26:25.056Z,1469838385.056 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:27:25.615Z,1469838445.615 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:28:46.949Z,1469838526.949 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T00:28:46.983Z,1469838526.983 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T00:29:26.177Z,1469838566.177 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:29:26.179Z,1469838566.179 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:29:27.725Z,1469838567.725 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:29:27.803Z,1469838567.803 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T00:30:32.703Z,1469838632.703 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1600.996875 min 2016-07-30T00:32:27.322Z,1469838747.322 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:32:27.328Z,1469838747.328 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:35:28.408Z,1469838928.408 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:35:28.437Z,1469838928.437 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:38:29.327Z,1469839109.327 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:38:29.345Z,1469839109.345 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:40:54.658Z,1469839254.658 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1611.409635 min 2016-07-30T00:41:00.696Z,1469839260.696 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T00:41:28.210Z,1469839288.210 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:41:29.420Z,1469839289.420 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2016-07-30T00:41:30.336Z,1469839290.336 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:41:30.343Z,1469839290.343 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:43:30.331Z,1469839410.331 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:44:31.436Z,1469839471.436 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:44:31.438Z,1469839471.438 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:45:33.126Z,1469839533.126 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:47:32.308Z,1469839652.308 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:47:32.310Z,1469839652.310 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:47:35.151Z,1469839655.151 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:49:37.937Z,1469839777.937 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T00:49:38.088Z,1469839778.088 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T00:50:33.466Z,1469839833.466 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:50:33.493Z,1469839833.493 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:51:13.042Z,1469839873.042 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1621.716927 min 2016-07-30T00:51:19.549Z,1469839879.549 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T00:53:34.270Z,1469840014.270 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:53:34.272Z,1469840014.272 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:56:35.178Z,1469840195.178 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:56:35.184Z,1469840195.184 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:59:35.954Z,1469840375.954 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T00:59:35.956Z,1469840375.956 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:01:31.640Z,1469840491.640 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1632.027344 min 2016-07-30T01:01:37.759Z,1469840497.759 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T01:01:38.482Z,1469840498.482 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:02:37.055Z,1469840557.055 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:02:37.057Z,1469840557.057 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:03:40.599Z,1469840620.599 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:05:38.198Z,1469840738.198 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:05:38.201Z,1469840738.201 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:05:42.705Z,1469840742.705 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:07:44.718Z,1469840864.718 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:08:39.224Z,1469840919.224 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:08:39.226Z,1469840919.226 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:09:46.855Z,1469840986.855 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:09:47.026Z,1469840987.026 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T01:11:40.124Z,1469841100.124 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:11:40.126Z,1469841100.126 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:11:40.138Z,1469841100.138 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-07-30T01:11:40.138Z,1469841100.138 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-07-30T01:11:50.134Z,1469841110.134 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1642.334635 min 2016-07-30T01:11:55.830Z,1469841115.830 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T01:21:48.082Z,1469841708.082 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:22:07.976Z,1469841727.976 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1652.632812 min 2016-07-30T01:22:14.872Z,1469841734.872 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T01:22:14.988Z,1469841734.988 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T01:23:50.098Z,1469841830.098 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:25:52.224Z,1469841952.224 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:27:54.374Z,1469842074.374 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:29:40.928Z,1469842180.928 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:29:40.930Z,1469842180.930 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:29:56.799Z,1469842196.799 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:29:56.938Z,1469842196.938 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T01:32:26.384Z,1469842346.384 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1662.939193 min 2016-07-30T01:32:41.754Z,1469842361.754 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:32:41.756Z,1469842361.756 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:34:29.845Z,1469842469.845 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T01:35:42.548Z,1469842542.548 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:35:42.550Z,1469842542.550 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:38:43.646Z,1469842723.646 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:38:43.647Z,1469842723.647 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:41:44.671Z,1469842904.671 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:41:44.673Z,1469842904.673 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:41:57.332Z,1469842917.332 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:42:44.758Z,1469842964.758 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1673.245312 min 2016-07-30T01:43:59.426Z,1469843039.426 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:44:51.156Z,1469843091.156 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:44:51.158Z,1469843091.158 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:44:52.850Z,1469843092.850 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T01:46:01.515Z,1469843161.515 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:47:51.712Z,1469843271.712 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:47:51.714Z,1469843271.714 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:48:03.540Z,1469843283.540 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:50:06.046Z,1469843406.046 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T01:50:10.205Z,1469843410.205 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T01:50:55.054Z,1469843455.054 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:50:55.055Z,1469843455.055 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:53:03.341Z,1469843583.341 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1683.554297 min 2016-07-30T01:53:56.182Z,1469843636.182 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:53:56.184Z,1469843636.184 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:55:11.617Z,1469843711.617 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T01:56:57.398Z,1469843817.398 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:56:57.401Z,1469843817.401 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:59:58.534Z,1469843998.534 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T01:59:58.536Z,1469843998.536 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:02:06.996Z,1469844126.996 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:02:59.534Z,1469844179.534 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:02:59.536Z,1469844179.536 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:03:21.540Z,1469844201.540 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1693.857943 min 2016-07-30T02:04:09.053Z,1469844249.053 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:05:31.459Z,1469844331.459 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T02:06:00.701Z,1469844360.701 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:06:00.703Z,1469844360.703 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:06:11.102Z,1469844371.102 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:08:13.127Z,1469844493.127 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:09:01.662Z,1469844541.662 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:09:01.664Z,1469844541.664 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:10:15.201Z,1469844615.201 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:10:15.435Z,1469844615.435 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T02:12:02.462Z,1469844722.462 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:12:02.465Z,1469844722.465 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:13:40.203Z,1469844820.203 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1704.170443 min 2016-07-30T02:15:03.630Z,1469844903.630 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:15:03.633Z,1469844903.633 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:15:49.303Z,1469844949.303 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T02:15:49.352Z,1469844949.352 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T02:18:04.721Z,1469845084.721 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:18:04.723Z,1469845084.723 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:21:06.249Z,1469845266.249 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:21:06.251Z,1469845266.251 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:22:15.978Z,1469845335.978 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:24:03.361Z,1469845443.361 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1714.555208 min 2016-07-30T02:24:07.055Z,1469845447.055 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:24:07.057Z,1469845447.057 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:24:18.083Z,1469845458.083 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:24:19.294Z,1469845459.294 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2016-07-30T02:26:20.148Z,1469845580.148 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:27:07.962Z,1469845627.962 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:27:07.964Z,1469845627.964 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:28:03.907Z,1469845683.907 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T02:28:22.238Z,1469845702.238 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:30:08.737Z,1469845808.737 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:30:08.748Z,1469845808.748 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:30:24.255Z,1469845824.255 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:30:28.025Z,1469845828.025 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T02:33:09.509Z,1469845989.509 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:33:09.511Z,1469845989.511 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:34:22.091Z,1469846062.091 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1724.867839 min 2016-07-30T02:36:10.457Z,1469846170.457 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:36:10.459Z,1469846170.459 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:38:25.804Z,1469846305.804 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T02:39:11.549Z,1469846351.549 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:39:11.566Z,1469846351.566 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:42:12.539Z,1469846532.539 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:42:12.545Z,1469846532.545 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:42:24.736Z,1469846544.736 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:44:26.854Z,1469846666.854 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:44:40.851Z,1469846680.851 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1735.179557 min 2016-07-30T02:45:13.455Z,1469846713.455 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:45:13.457Z,1469846713.457 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:46:28.870Z,1469846788.870 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:48:14.528Z,1469846894.528 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:48:14.530Z,1469846894.530 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:48:30.915Z,1469846910.915 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:48:46.608Z,1469846926.608 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T02:50:32.961Z,1469847032.961 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T02:50:33.308Z,1469847033.308 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T02:51:15.398Z,1469847075.398 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:51:15.400Z,1469847075.400 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:54:16.594Z,1469847256.594 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:54:16.596Z,1469847256.596 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:55:07.440Z,1469847307.440 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1745.623307 min 2016-07-30T02:57:17.803Z,1469847437.803 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:57:17.805Z,1469847437.805 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T02:59:06.636Z,1469847546.636 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T03:00:19.588Z,1469847619.588 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:00:19.590Z,1469847619.590 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:02:33.947Z,1469847753.947 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:03:26.459Z,1469847806.459 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:03:26.461Z,1469847806.461 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:04:36.465Z,1469847876.465 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:05:36.725Z,1469847936.725 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1756.110937 min 2016-07-30T03:06:27.624Z,1469847987.624 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:06:27.626Z,1469847987.626 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:06:40.557Z,1469848000.557 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:08:42.631Z,1469848122.631 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:09:24.774Z,1469848164.774 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T03:09:24.854Z,1469848164.854 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T03:09:28.420Z,1469848168.420 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:09:28.426Z,1469848168.426 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:10:44.655Z,1469848244.655 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:10:47.078Z,1469848247.078 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T03:12:29.280Z,1469848349.280 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:12:29.282Z,1469848349.282 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:15:30.376Z,1469848530.376 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:15:30.378Z,1469848530.378 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:15:55.168Z,1469848555.168 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1766.418880 min 2016-07-30T03:18:31.409Z,1469848711.409 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:18:31.411Z,1469848711.411 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:21:32.291Z,1469848892.291 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:21:32.293Z,1469848892.293 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:21:37.854Z,1469848897.854 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T03:22:45.121Z,1469848965.121 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:24:33.470Z,1469849073.470 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:24:33.472Z,1469849073.472 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:24:47.234Z,1469849087.234 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:26:18.938Z,1469849178.938 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1776.815755 min 2016-07-30T03:26:49.559Z,1469849209.559 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:27:34.468Z,1469849254.468 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:27:34.470Z,1469849254.470 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:28:51.601Z,1469849331.601 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:30:35.453Z,1469849435.453 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:30:35.455Z,1469849435.455 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:30:53.751Z,1469849453.751 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:30:53.860Z,1469849453.860 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T03:31:56.942Z,1469849516.942 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T03:33:36.293Z,1469849616.293 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:33:36.296Z,1469849616.296 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:36:37.421Z,1469849797.421 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:36:37.423Z,1469849797.423 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:36:37.426Z,1469849797.426 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1787.122917 min 2016-07-30T03:39:41.086Z,1469849981.086 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:39:41.089Z,1469849981.089 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:42:15.762Z,1469850135.762 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T03:42:41.785Z,1469850161.785 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:42:41.787Z,1469850161.787 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:42:54.575Z,1469850174.575 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:44:59.097Z,1469850299.097 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:45:42.767Z,1469850342.767 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:45:42.770Z,1469850342.770 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:46:58.920Z,1469850418.920 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1797.434245 min 2016-07-30T03:47:01.287Z,1469850421.287 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:48:43.579Z,1469850523.579 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:48:43.581Z,1469850523.581 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:49:03.403Z,1469850543.403 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:49:13.736Z,1469850553.736 [CBIT](IMPORTANT): Beginning GF scan 2016-07-30T03:51:05.444Z,1469850665.444 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T03:51:05.584Z,1469850665.584 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T03:51:44.394Z,1469850704.394 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:51:44.395Z,1469850704.395 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:52:33.102Z,1469850753.102 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T03:54:45.308Z,1469850885.308 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:54:45.310Z,1469850885.310 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:57:18.850Z,1469851038.850 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1807.813672 min 2016-07-30T03:57:46.199Z,1469851066.199 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T03:57:46.201Z,1469851066.201 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:00:47.032Z,1469851247.032 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:00:47.034Z,1469851247.034 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:02:50.892Z,1469851370.892 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T04:02:50.925Z,1469851370.925 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T04:03:06.335Z,1469851386.335 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:03:48.209Z,1469851428.209 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:03:48.211Z,1469851428.211 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:05:08.424Z,1469851508.424 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:06:49.062Z,1469851609.062 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:06:49.065Z,1469851609.065 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:07:10.750Z,1469851630.750 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:07:37.507Z,1469851657.507 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1818.123958 min 2016-07-30T04:09:12.770Z,1469851752.770 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:09:49.880Z,1469851789.880 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:09:49.886Z,1469851789.886 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:11:14.844Z,1469851874.844 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:11:15.163Z,1469851875.163 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T04:12:52.544Z,1469851972.544 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:12:52.546Z,1469851972.546 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:15:04.410Z,1469852104.410 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T04:15:53.262Z,1469852153.262 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:15:53.264Z,1469852153.264 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:17:56.036Z,1469852276.036 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1828.432422 min 2016-07-30T04:18:54.089Z,1469852334.089 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:18:54.091Z,1469852334.091 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:21:55.157Z,1469852515.157 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:21:55.159Z,1469852515.159 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:23:15.645Z,1469852595.645 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:24:56.174Z,1469852696.174 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:24:56.177Z,1469852696.177 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:25:18.436Z,1469852718.436 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:25:24.431Z,1469852724.431 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T04:27:21.186Z,1469852841.186 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:27:57.180Z,1469852877.180 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:27:57.183Z,1469852877.183 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:28:14.411Z,1469852894.411 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1838.740495 min 2016-07-30T04:29:23.244Z,1469852963.244 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:30:58.150Z,1469853058.150 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:30:58.152Z,1469853058.152 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:31:25.377Z,1469853085.377 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:31:25.523Z,1469853085.523 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T04:33:59.132Z,1469853239.132 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:33:59.134Z,1469853239.134 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:35:42.201Z,1469853342.201 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T04:36:59.974Z,1469853419.974 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:36:59.976Z,1469853419.976 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:38:33.316Z,1469853513.316 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1849.054036 min 2016-07-30T04:40:01.093Z,1469853601.093 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:40:01.095Z,1469853601.095 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:43:01.949Z,1469853781.949 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:43:01.951Z,1469853781.951 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:43:25.790Z,1469853805.790 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:45:27.903Z,1469853927.903 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:46:01.224Z,1469853961.224 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T04:46:02.844Z,1469853962.844 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:46:02.846Z,1469853962.846 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:47:29.968Z,1469854049.968 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:48:51.959Z,1469854131.959 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1859.365365 min 2016-07-30T04:49:03.665Z,1469854143.665 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:49:03.667Z,1469854143.667 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:49:32.767Z,1469854172.767 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:51:34.908Z,1469854294.908 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T04:51:35.262Z,1469854295.262 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T04:52:04.588Z,1469854324.588 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:52:04.590Z,1469854324.590 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:55:05.477Z,1469854505.477 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:55:05.479Z,1469854505.479 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:56:19.295Z,1469854579.295 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T04:56:19.355Z,1469854579.355 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T04:58:06.209Z,1469854686.209 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:58:06.211Z,1469854686.211 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T04:59:10.701Z,1469854750.701 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1869.677604 min 2016-07-30T05:01:07.146Z,1469854867.146 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:01:07.148Z,1469854867.148 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:03:35.369Z,1469855015.369 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:04:07.993Z,1469855047.993 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:04:07.995Z,1469855047.995 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:05:38.171Z,1469855138.171 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:07:08.965Z,1469855228.965 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:07:08.967Z,1469855228.967 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:07:40.289Z,1469855260.289 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:08:32.806Z,1469855312.806 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T05:09:29.225Z,1469855369.225 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1879.985807 min 2016-07-30T05:09:42.313Z,1469855382.313 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:10:09.821Z,1469855409.821 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:10:09.823Z,1469855409.823 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:11:44.659Z,1469855504.659 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:11:44.887Z,1469855504.887 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T05:13:10.587Z,1469855590.587 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:13:10.589Z,1469855590.589 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:16:11.647Z,1469855771.647 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:16:11.650Z,1469855771.650 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:18:53.566Z,1469855933.566 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T05:19:12.828Z,1469855952.828 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:19:12.835Z,1469855952.835 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:19:48.877Z,1469855988.877 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1890.313802 min 2016-07-30T05:22:13.923Z,1469856133.923 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:22:13.929Z,1469856133.929 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:23:45.569Z,1469856225.569 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:25:14.754Z,1469856314.754 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:25:14.760Z,1469856314.760 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:25:47.686Z,1469856347.686 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:27:49.735Z,1469856469.735 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:28:17.882Z,1469856497.882 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:28:17.884Z,1469856497.884 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:29:13.596Z,1469856553.596 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T05:29:51.845Z,1469856591.845 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:30:18.600Z,1469856618.600 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1900.810156 min 2016-07-30T05:31:18.768Z,1469856678.768 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:31:18.770Z,1469856678.770 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:31:54.219Z,1469856714.219 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:31:54.423Z,1469856714.423 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T05:34:22.744Z,1469856862.744 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:34:22.746Z,1469856862.746 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:37:23.344Z,1469857043.344 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:37:23.346Z,1469857043.346 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:39:35.527Z,1469857175.527 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T05:40:24.369Z,1469857224.369 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:40:24.371Z,1469857224.371 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:40:42.276Z,1469857242.276 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1911.204167 min 2016-07-30T05:43:25.361Z,1469857405.361 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:43:25.364Z,1469857405.364 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:43:54.563Z,1469857434.563 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:45:56.660Z,1469857556.660 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:46:26.519Z,1469857586.519 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:46:26.521Z,1469857586.521 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:47:58.826Z,1469857678.826 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:49:27.655Z,1469857767.655 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:49:27.657Z,1469857767.657 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:49:53.628Z,1469857793.628 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T05:49:53.662Z,1469857793.662 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T05:50:01.604Z,1469857801.604 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:51:01.006Z,1469857861.006 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1921.516276 min 2016-07-30T05:52:04.471Z,1469857924.471 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T05:52:04.556Z,1469857924.556 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T05:52:28.871Z,1469857948.871 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:52:28.873Z,1469857948.873 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:55:29.805Z,1469858129.805 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:55:29.812Z,1469858129.812 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:58:30.652Z,1469858310.652 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T05:58:30.654Z,1469858310.654 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:01:19.712Z,1469858479.712 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1931.827995 min 2016-07-30T06:01:31.821Z,1469858491.821 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:01:31.823Z,1469858491.823 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:02:07.782Z,1469858527.782 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T06:04:04.836Z,1469858644.836 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:04:32.998Z,1469858672.998 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:04:33.016Z,1469858673.016 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:06:06.922Z,1469858766.922 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:07:33.979Z,1469858853.979 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:07:33.981Z,1469858853.981 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:08:08.954Z,1469858888.954 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:10:11.388Z,1469859011.388 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:10:34.840Z,1469859034.840 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:10:34.843Z,1469859034.843 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:11:38.624Z,1469859098.624 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1942.142318 min 2016-07-30T06:12:13.778Z,1469859133.778 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:12:13.972Z,1469859133.972 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T06:12:25.847Z,1469859145.847 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T06:13:35.650Z,1469859215.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:13:35.652Z,1469859215.652 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:16:36.753Z,1469859396.753 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:16:36.755Z,1469859396.755 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:19:37.969Z,1469859577.969 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:19:37.971Z,1469859577.971 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:22:02.050Z,1469859722.050 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1952.532812 min 2016-07-30T06:22:38.920Z,1469859758.920 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:22:38.923Z,1469859758.923 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:22:43.272Z,1469859763.272 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T06:24:14.651Z,1469859854.651 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:25:39.782Z,1469859939.782 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:25:39.784Z,1469859939.784 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:26:16.729Z,1469859976.729 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:28:18.778Z,1469860098.778 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:28:40.830Z,1469860120.830 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:28:40.833Z,1469860120.833 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:28:40.845Z,1469860120.845 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-07-30T06:28:40.845Z,1469860120.845 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-07-30T06:30:23.688Z,1469860223.688 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:32:20.643Z,1469860340.643 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1962.844141 min 2016-07-30T06:32:27.347Z,1469860347.347 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:32:27.614Z,1469860347.614 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T06:33:03.154Z,1469860383.154 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T06:42:39.348Z,1469860959.348 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1973.154948 min 2016-07-30T06:43:22.161Z,1469861002.161 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T06:43:22.228Z,1469861002.228 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T06:44:28.153Z,1469861068.153 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:46:30.214Z,1469861190.214 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:46:43.061Z,1469861203.061 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:46:43.063Z,1469861203.063 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:48:32.259Z,1469861312.259 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:49:43.686Z,1469861383.686 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:49:43.688Z,1469861383.688 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:50:34.333Z,1469861434.333 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:52:36.378Z,1469861556.378 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T06:52:36.636Z,1469861556.636 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T06:52:44.622Z,1469861564.622 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:52:44.625Z,1469861564.625 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:52:57.853Z,1469861577.853 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1983.463932 min 2016-07-30T06:55:35.983Z,1469861735.983 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T06:55:45.590Z,1469861745.590 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:55:45.592Z,1469861745.592 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:58:46.631Z,1469861926.631 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T06:58:46.634Z,1469861926.634 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:01:47.539Z,1469862107.539 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:01:47.541Z,1469862107.541 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:03:16.811Z,1469862196.811 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1993.778646 min 2016-07-30T07:04:37.227Z,1469862277.227 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:04:48.644Z,1469862288.644 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:04:48.651Z,1469862288.651 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:05:54.718Z,1469862354.718 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T07:06:39.349Z,1469862399.349 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:07:49.480Z,1469862469.480 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:07:49.482Z,1469862469.482 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:08:41.398Z,1469862521.398 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:10:44.201Z,1469862644.201 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:10:50.672Z,1469862650.672 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:10:50.674Z,1469862650.674 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:12:46.242Z,1469862766.242 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:12:46.458Z,1469862766.458 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T07:13:35.258Z,1469862815.258 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2004.086849 min 2016-07-30T07:13:51.699Z,1469862831.699 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:13:51.701Z,1469862831.701 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:16:13.521Z,1469862973.521 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T07:16:52.887Z,1469863012.887 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:16:52.889Z,1469863012.889 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:19:54.022Z,1469863194.022 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:19:54.024Z,1469863194.024 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:22:55.056Z,1469863375.056 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:22:55.058Z,1469863375.058 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:23:58.781Z,1469863438.781 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2014.479036 min 2016-07-30T07:24:46.698Z,1469863486.698 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:25:55.887Z,1469863555.887 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:25:55.889Z,1469863555.889 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:26:31.611Z,1469863591.611 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T07:26:49.048Z,1469863609.048 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:28:51.122Z,1469863731.122 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:28:56.762Z,1469863736.762 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:28:56.768Z,1469863736.768 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:30:53.203Z,1469863853.203 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:30:54.413Z,1469863854.413 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2016-07-30T07:31:57.601Z,1469863917.601 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:31:57.603Z,1469863917.603 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:32:55.325Z,1469863975.325 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:32:55.411Z,1469863975.411 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T07:34:22.248Z,1469864062.248 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2024.870182 min 2016-07-30T07:34:58.819Z,1469864098.819 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:34:58.829Z,1469864098.829 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:36:49.135Z,1469864209.135 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T07:36:49.168Z,1469864209.168 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T07:37:59.670Z,1469864279.670 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:37:59.672Z,1469864279.672 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:41:00.680Z,1469864460.680 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:41:00.682Z,1469864460.682 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:44:01.820Z,1469864641.820 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:44:01.823Z,1469864641.823 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:44:41.095Z,1469864681.095 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2035.183073 min 2016-07-30T07:44:56.150Z,1469864696.150 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:46:58.328Z,1469864818.328 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:47:03.020Z,1469864823.020 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:47:03.024Z,1469864823.024 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:49:01.130Z,1469864941.130 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:49:02.125Z,1469864942.125 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T07:50:05.044Z,1469865005.044 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:50:05.046Z,1469865005.046 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:51:03.163Z,1469865063.163 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:53:05.300Z,1469865185.300 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T07:53:05.453Z,1469865185.453 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T07:53:05.835Z,1469865185.835 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:53:05.837Z,1469865185.837 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:55:08.886Z,1469865308.886 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2045.647135 min 2016-07-30T07:56:06.739Z,1469865366.739 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:56:06.741Z,1469865366.741 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:59:07.891Z,1469865547.891 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:59:07.893Z,1469865547.893 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T07:59:21.156Z,1469865561.156 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T08:02:09.028Z,1469865729.028 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:02:09.030Z,1469865729.030 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:05:05.689Z,1469865905.689 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:05:10.223Z,1469865910.223 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:05:10.225Z,1469865910.225 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:05:39.406Z,1469865939.406 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2056.156120 min 2016-07-30T08:07:08.119Z,1469866028.119 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:08:11.376Z,1469866091.376 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:08:11.378Z,1469866091.378 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:09:10.140Z,1469866150.140 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:09:43.109Z,1469866183.109 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T08:11:12.189Z,1469866272.189 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:11:12.382Z,1469866272.382 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:11:12.384Z,1469866272.384 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:13:14.303Z,1469866394.303 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:13:14.342Z,1469866394.342 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T08:14:13.225Z,1469866453.225 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:14:13.227Z,1469866453.227 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:15:58.269Z,1469866558.269 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2066.469661 min 2016-07-30T08:17:14.366Z,1469866634.366 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:17:14.372Z,1469866634.372 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:20:02.176Z,1469866802.176 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T08:20:15.190Z,1469866815.190 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:20:15.197Z,1469866815.197 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:23:16.045Z,1469866996.045 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:23:16.048Z,1469866996.048 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:25:14.848Z,1469867114.848 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:26:17.159Z,1469867177.159 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:26:17.162Z,1469867177.162 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:26:21.561Z,1469867181.561 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2076.858594 min 2016-07-30T08:27:17.250Z,1469867237.250 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:29:17.930Z,1469867357.930 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:29:18.304Z,1469867358.304 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:29:19.367Z,1469867359.367 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:30:22.058Z,1469867422.058 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T08:30:22.174Z,1469867422.174 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T08:31:22.162Z,1469867482.162 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:32:18.925Z,1469867538.925 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:32:19.324Z,1469867539.324 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:33:26.310Z,1469867606.310 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:33:26.366Z,1469867606.366 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T08:35:19.885Z,1469867719.885 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:35:20.262Z,1469867720.262 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:36:55.925Z,1469867815.925 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2087.431641 min 2016-07-30T08:38:20.922Z,1469867900.922 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:38:21.321Z,1469867901.321 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:41:21.743Z,1469868081.743 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:41:22.143Z,1469868082.143 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:42:36.663Z,1469868156.663 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T08:44:22.868Z,1469868262.868 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:44:23.267Z,1469868263.267 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:45:26.827Z,1469868326.827 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:47:14.520Z,1469868434.520 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2097.740755 min 2016-07-30T08:47:23.785Z,1469868443.785 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:47:24.189Z,1469868444.189 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:47:29.165Z,1469868449.165 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:49:31.963Z,1469868571.963 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:50:24.818Z,1469868624.818 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:50:25.157Z,1469868625.157 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:51:34.104Z,1469868694.104 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:52:55.969Z,1469868775.969 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T08:53:25.612Z,1469868805.612 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:53:26.006Z,1469868806.006 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:53:36.526Z,1469868816.526 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T08:53:36.657Z,1469868816.657 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T08:56:26.790Z,1469868986.790 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:56:27.237Z,1469868987.237 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:57:33.245Z,1469869053.245 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2108.054167 min 2016-07-30T08:59:27.888Z,1469869167.888 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T08:59:28.295Z,1469869168.295 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:02:28.991Z,1469869348.991 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:02:29.399Z,1469869349.399 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:03:13.887Z,1469869393.887 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T09:05:30.189Z,1469869530.189 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:05:30.635Z,1469869530.635 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:05:36.955Z,1469869536.955 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:07:39.052Z,1469869659.052 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:07:56.559Z,1469869676.559 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2118.441276 min 2016-07-30T09:08:31.055Z,1469869711.055 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:08:31.416Z,1469869711.416 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:09:41.839Z,1469869781.839 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:11:32.255Z,1469869892.255 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:11:32.257Z,1469869892.257 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:11:44.245Z,1469869904.245 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:13:32.669Z,1469870012.669 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T09:13:46.269Z,1469870026.269 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:13:46.318Z,1469870026.318 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T09:14:33.258Z,1469870073.258 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:14:33.260Z,1469870073.260 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:17:34.169Z,1469870254.169 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:17:34.171Z,1469870254.171 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:18:15.383Z,1469870295.383 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2128.755599 min 2016-07-30T09:20:35.008Z,1469870435.008 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:20:35.010Z,1469870435.010 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:23:36.042Z,1469870616.042 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:23:36.045Z,1469870616.045 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:23:49.931Z,1469870629.931 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T09:23:49.964Z,1469870629.964 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T09:25:46.786Z,1469870746.786 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:26:38.153Z,1469870798.153 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:26:38.156Z,1469870798.156 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:27:48.912Z,1469870868.912 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:28:38.902Z,1469870918.902 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2139.147656 min 2016-07-30T09:29:42.200Z,1469870982.200 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:29:42.202Z,1469870982.202 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:29:51.694Z,1469870991.694 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:31:53.976Z,1469871113.976 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:32:42.771Z,1469871162.771 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:32:42.773Z,1469871162.773 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:33:56.045Z,1469871236.045 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:33:59.033Z,1469871239.033 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T09:35:43.676Z,1469871343.676 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:35:43.678Z,1469871343.678 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:36:05.740Z,1469871365.740 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T09:38:44.782Z,1469871524.782 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:38:44.784Z,1469871524.784 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:39:02.393Z,1469871542.393 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2149.539453 min 2016-07-30T09:41:45.914Z,1469871705.914 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:41:45.915Z,1469871705.915 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:44:47.099Z,1469871887.099 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:44:47.104Z,1469871887.104 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:45:56.478Z,1469871956.478 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:46:24.668Z,1469871984.668 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T09:47:48.040Z,1469872068.040 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:47:48.042Z,1469872068.042 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:47:58.607Z,1469872078.607 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:49:21.043Z,1469872161.043 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2159.849349 min 2016-07-30T09:49:40.362Z,1469872180.362 [CBIT](IMPORTANT): Beginning GF scan 2016-07-30T09:50:00.629Z,1469872200.629 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:50:49.047Z,1469872249.047 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:50:49.054Z,1469872249.054 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:52:03.155Z,1469872323.155 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:53:50.156Z,1469872430.156 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:53:50.158Z,1469872430.158 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:54:05.204Z,1469872445.204 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T09:54:05.436Z,1469872445.436 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T09:56:42.642Z,1469872602.642 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T09:56:51.183Z,1469872611.183 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:56:51.185Z,1469872611.185 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:59:39.737Z,1469872779.737 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2170.161328 min 2016-07-30T09:59:52.273Z,1469872792.273 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T09:59:52.275Z,1469872792.275 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:02:53.397Z,1469872973.397 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:02:53.399Z,1469872973.399 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:05:54.574Z,1469873154.574 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:05:54.577Z,1469873154.577 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:06:06.078Z,1469873166.078 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:07:02.243Z,1469873222.243 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T10:08:09.325Z,1469873289.325 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:08:55.418Z,1469873335.418 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:08:55.420Z,1469873335.420 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:10:06.425Z,1469873406.425 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2180.606380 min 2016-07-30T10:10:11.422Z,1469873411.422 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:11:56.427Z,1469873516.427 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:11:56.429Z,1469873516.429 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:12:13.720Z,1469873533.720 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:14:15.777Z,1469873655.777 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:14:16.102Z,1469873656.102 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T10:14:57.313Z,1469873697.313 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:14:57.315Z,1469873697.315 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:17:22.581Z,1469873842.581 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T10:17:22.637Z,1469873842.637 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T10:17:58.301Z,1469873878.301 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:17:58.304Z,1469873878.304 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:20:42.249Z,1469874042.249 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2191.155208 min 2016-07-30T10:20:59.553Z,1469874059.553 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:20:59.555Z,1469874059.555 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:24:00.641Z,1469874240.641 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:24:00.644Z,1469874240.644 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:26:16.254Z,1469874376.254 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:27:01.614Z,1469874421.614 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:27:01.617Z,1469874421.617 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:28:18.355Z,1469874498.355 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:29:36.411Z,1469874576.411 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T10:30:02.435Z,1469874602.435 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:30:02.437Z,1469874602.437 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:30:20.373Z,1469874620.373 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:31:07.338Z,1469874667.338 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2201.621615 min 2016-07-30T10:32:22.701Z,1469874742.701 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:33:03.662Z,1469874783.662 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:33:03.665Z,1469874783.665 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:34:24.787Z,1469874864.787 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:34:25.216Z,1469874865.216 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T10:36:04.601Z,1469874964.601 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:36:04.603Z,1469874964.603 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:39:05.554Z,1469875145.554 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:39:05.556Z,1469875145.556 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:39:53.687Z,1469875193.687 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T10:41:25.896Z,1469875285.896 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2211.930990 min 2016-07-30T10:42:06.437Z,1469875326.437 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:42:06.439Z,1469875326.439 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:45:07.342Z,1469875507.342 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:45:07.345Z,1469875507.345 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:46:25.788Z,1469875585.788 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:48:08.289Z,1469875688.289 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:48:08.291Z,1469875688.291 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:48:27.874Z,1469875707.874 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:50:11.477Z,1469875811.477 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T10:50:29.924Z,1469875829.924 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:51:09.251Z,1469875869.251 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:51:09.254Z,1469875869.254 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:51:44.851Z,1469875904.851 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2222.247135 min 2016-07-30T10:52:31.965Z,1469875951.965 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:54:10.157Z,1469876050.157 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:54:10.159Z,1469876050.159 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:54:34.755Z,1469876074.755 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T10:54:34.953Z,1469876074.953 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T10:57:11.184Z,1469876231.184 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T10:57:11.186Z,1469876231.186 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:00:12.045Z,1469876412.045 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:00:12.051Z,1469876412.051 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:00:30.337Z,1469876430.337 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T11:02:03.706Z,1469876523.706 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2232.561458 min 2016-07-30T11:03:13.157Z,1469876593.157 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:03:13.160Z,1469876593.160 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:06:14.101Z,1469876774.101 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:06:14.120Z,1469876774.120 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:06:35.176Z,1469876795.176 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:08:37.297Z,1469876917.297 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:09:14.898Z,1469876954.898 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:09:14.916Z,1469876954.916 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:10:39.335Z,1469877039.335 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:10:50.138Z,1469877050.138 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T11:10:50.211Z,1469877050.211 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T11:12:15.861Z,1469877135.861 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:12:15.863Z,1469877135.863 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:12:27.452Z,1469877147.452 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2242.957031 min 2016-07-30T11:12:41.412Z,1469877161.412 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:14:43.469Z,1469877283.469 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:14:43.867Z,1469877283.867 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T11:15:16.669Z,1469877316.669 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:15:16.671Z,1469877316.671 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:18:17.603Z,1469877497.603 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:18:17.622Z,1469877497.622 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:21:18.648Z,1469877678.648 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:21:18.667Z,1469877678.667 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:22:51.178Z,1469877771.178 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2253.352344 min 2016-07-30T11:23:03.226Z,1469877783.226 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T11:24:19.765Z,1469877859.765 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:24:19.767Z,1469877859.767 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:26:44.859Z,1469878004.859 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:27:20.601Z,1469878040.601 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:27:20.603Z,1469878040.603 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:28:46.885Z,1469878126.885 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:30:21.722Z,1469878221.722 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:30:21.723Z,1469878221.723 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:30:48.998Z,1469878248.998 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:32:51.035Z,1469878371.035 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:33:09.901Z,1469878389.901 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2263.664323 min 2016-07-30T11:33:21.253Z,1469878401.253 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T11:33:22.867Z,1469878402.867 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:33:22.869Z,1469878402.869 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:34:53.125Z,1469878493.125 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:34:53.514Z,1469878493.514 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T11:36:23.796Z,1469878583.796 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:36:23.798Z,1469878583.798 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:39:24.628Z,1469878764.628 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:39:24.630Z,1469878764.630 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:42:25.765Z,1469878945.765 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:42:25.783Z,1469878945.783 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:43:28.715Z,1469879008.715 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2273.978125 min 2016-07-30T11:43:41.170Z,1469879021.170 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T11:45:26.928Z,1469879126.928 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:45:26.930Z,1469879126.930 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T11:45:26.971Z,1469879126.971 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-07-30T11:45:26.972Z,1469879126.972 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-07-30T11:46:54.082Z,1469879214.082 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:48:56.095Z,1469879336.095 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:50:58.132Z,1469879458.132 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:53:00.258Z,1469879580.258 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:53:47.310Z,1469879627.310 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2284.288021 min 2016-07-30T11:54:00.982Z,1469879640.982 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T11:55:03.056Z,1469879703.056 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T11:55:03.152Z,1469879703.152 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T12:03:27.705Z,1469880207.705 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T12:03:27.727Z,1469880207.727 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T12:04:06.111Z,1469880246.111 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2294.601042 min 2016-07-30T12:04:19.818Z,1469880259.818 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T12:04:19.893Z,1469880259.893 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-07-30T12:06:28.780Z,1469880388.780 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T12:06:28.781Z,1469880388.781 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T12:07:04.054Z,1469880424.054 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T12:09:06.196Z,1469880546.196 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T12:09:32.440Z,1469880572.440 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T12:09:32.442Z,1469880572.442 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T12:11:08.337Z,1469880668.337 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T12:12:33.244Z,1469880753.244 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T12:12:33.246Z,1469880753.246 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T12:13:10.350Z,1469880790.350 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T12:14:30.251Z,1469880870.251 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2305.003385 min 2016-07-30T12:15:12.420Z,1469880912.420 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-07-30T12:15:12.453Z,1469880912.453 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-07-30T12:15:33.876Z,1469880933.876 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T12:15:33.878Z,1469880933.878 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T12:16:34.078Z,1469880994.078 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-07-30T12:18:34.442Z,1469881114.442 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T12:18:34.445Z,1469881114.445 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T12:21:35.286Z,1469881295.286 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-07-30T12:21:35.288Z,1469881295.288 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan