2016-06-30T21:49:43.529Z,1467323383.529 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2016-06-30T21:49:50.485Z,1467323390.485 [SBIT](IMPORTANT): git: 2015-11-13-11-g036008f
2016-06-30T21:49:50.486Z,1467323390.486 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2016-06-30T21:49:50.486Z,1467323390.486 [SBIT](IMPORTANT): Kernel Version:#639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
2016-06-30T21:49:50.488Z,1467323390.488 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2016-06-30T21:49:50.489Z,1467323390.489 [CBIT](CRITICAL): LAST REBOOT DUE TO WATCHDOG TIMER RESET.
2016-06-30T21:49:50.649Z,1467323390.649 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T21:49:51.802Z,1467323391.802 [CommandLine](FAULT): Scheduling is paused
2016-06-30T21:49:52.675Z,1467323392.675 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2016-06-30T21:50:03.323Z,1467323403.323 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T21:50:17.736Z,1467323417.736 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T21:50:31.754Z,1467323431.754 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T21:50:45.748Z,1467323445.748 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T21:50:54.183Z,1467323454.183 [SBIT](IMPORTANT): Beginning Startup BIT
2016-06-30T21:50:54.185Z,1467323454.185 [CBIT](IMPORTANT): Beginning GF scan
2016-06-30T21:51:10.024Z,1467323470.024 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-06-30T21:51:10.168Z,1467323470.168 [CBIT](CRITICAL): Data Fault in component: PNI_TCM
2016-06-30T21:51:20.872Z,1467323480.872 [CBIT](IMPORTANT): No ground fault detected
2016-06-30T21:51:48.385Z,1467323508.385 [SBIT](IMPORTANT): SBIT PASSED
2016-06-30T21:51:48.758Z,1467323508.758 [MissionManager](IMPORTANT): Started mission Startup
2016-06-30T21:51:50.763Z,1467323510.763 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T21:51:50.765Z,1467323510.765 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T21:51:50.988Z,1467323510.988 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T21:51:53.002Z,1467323513.002 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T21:53:26.146Z,1467323606.146 [MissionManager](IMPORTANT): Started mission Default
2016-06-30T21:53:51.803Z,1467323631.803 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T21:53:51.805Z,1467323631.805 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T21:53:53.349Z,1467323633.349 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T21:53:55.359Z,1467323635.359 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T21:55:06.973Z,1467323706.973 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-06-30T21:55:52.594Z,1467323752.594 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T21:55:52.595Z,1467323752.595 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T21:55:55.370Z,1467323755.370 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T21:55:57.381Z,1467323757.381 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T21:56:23.007Z,1467323783.007 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T21:56:37.386Z,1467323797.386 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T21:56:51.800Z,1467323811.800 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T21:57:06.183Z,1467323826.183 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T21:57:20.596Z,1467323840.596 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T21:57:20.614Z,1467323840.614 [CBIT](CRITICAL): Data Fault in component: PNI_TCM
2016-06-30T21:57:53.813Z,1467323873.813 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T21:57:53.815Z,1467323873.815 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T21:57:57.740Z,1467323877.740 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T21:57:59.751Z,1467323879.751 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T21:59:12.176Z,1467323952.176 [NAL9602](FAULT): Queried for signal strength and failed to receive proper response. no error
2016-06-30T21:59:54.686Z,1467323994.686 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T21:59:54.688Z,1467323994.688 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T21:59:59.774Z,1467323999.774 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T21:59:59.922Z,1467323999.922 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-06-30T22:00:05.090Z,1467324005.090 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-06-30T22:01:55.705Z,1467324115.705 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:01:55.706Z,1467324115.706 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:02:32.987Z,1467324152.987 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:02:47.840Z,1467324167.840 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:03:02.213Z,1467324182.213 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:03:15.912Z,1467324195.912 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:03:30.381Z,1467324210.381 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:03:30.399Z,1467324210.399 [CBIT](CRITICAL): Data Fault in component: PNI_TCM
2016-06-30T22:03:56.836Z,1467324236.836 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:03:56.859Z,1467324236.859 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:05:58.313Z,1467324358.313 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:05:58.314Z,1467324358.314 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:07:59.319Z,1467324479.319 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:07:59.322Z,1467324479.322 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:08:43.304Z,1467324523.304 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:08:57.696Z,1467324537.696 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:09:11.765Z,1467324551.765 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:09:26.129Z,1467324566.129 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:09:40.242Z,1467324580.242 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:09:40.260Z,1467324580.260 [CBIT](CRITICAL): Data Fault in component: PNI_TCM
2016-06-30T22:09:59.967Z,1467324599.967 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:10:00.331Z,1467324600.331 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:10:00.333Z,1467324600.333 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:10:22.431Z,1467324622.431 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-06-30T22:12:00.283Z,1467324720.283 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:12:01.513Z,1467324721.513 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:12:01.535Z,1467324721.535 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:12:02.301Z,1467324722.301 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:14:02.348Z,1467324842.348 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:14:02.437Z,1467324842.437 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:14:02.442Z,1467324842.442 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:14:04.361Z,1467324844.361 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:14:53.124Z,1467324893.124 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:15:07.261Z,1467324907.261 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:15:21.744Z,1467324921.744 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:15:35.392Z,1467324935.392 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:15:49.800Z,1467324949.800 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-06-30T22:15:49.834Z,1467324949.834 [CBIT](CRITICAL): Data Fault in component: PNI_TCM
2016-06-30T22:16:03.397Z,1467324963.397 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:16:03.399Z,1467324963.399 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:16:04.385Z,1467324964.385 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:16:06.395Z,1467324966.395 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:18:04.205Z,1467325084.205 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:18:04.207Z,1467325084.207 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:18:06.775Z,1467325086.775 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:18:08.784Z,1467325088.784 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:20:05.125Z,1467325205.125 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:20:05.127Z,1467325205.127 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2016-06-30T22:20:09.117Z,1467325209.117 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:20:09.139Z,1467325209.139 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-06-30T22:20:43.568Z,1467325243.568 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-06-30T22:21:03.595Z,1467325263.595 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-06-30T22:23:06.042Z,1467325386.042 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:23:06.044Z,1467325386.044 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:26:07.157Z,1467325567.157 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:26:07.179Z,1467325567.179 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:29:08.245Z,1467325748.245 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:29:08.269Z,1467325748.269 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:30:09.350Z,1467325809.350 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:31:02.369Z,1467325862.369 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-06-30T22:31:02.406Z,1467325862.406 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-06-30T22:32:09.196Z,1467325929.196 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:32:09.198Z,1467325929.198 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:32:09.710Z,1467325929.710 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:32:11.720Z,1467325931.720 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:34:12.055Z,1467326052.055 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:34:14.066Z,1467326054.066 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:35:10.257Z,1467326110.257 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:35:10.259Z,1467326110.259 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:36:14.441Z,1467326174.441 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:36:16.456Z,1467326176.456 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:38:11.408Z,1467326291.408 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:38:11.410Z,1467326291.410 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:38:16.482Z,1467326296.482 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:38:18.497Z,1467326298.497 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:40:18.512Z,1467326418.512 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:40:18.561Z,1467326418.561 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-06-30T22:41:12.713Z,1467326472.713 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:41:12.715Z,1467326472.715 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:43:14.648Z,1467326594.648 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-06-30T22:44:13.241Z,1467326653.241 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:44:13.243Z,1467326653.243 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:47:14.175Z,1467326834.175 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:47:14.177Z,1467326834.177 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:50:15.033Z,1467327015.033 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:50:15.051Z,1467327015.051 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:50:18.725Z,1467327018.725 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:52:19.104Z,1467327139.104 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:52:21.115Z,1467327141.115 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:53:16.709Z,1467327196.709 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:53:16.711Z,1467327196.711 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:53:32.911Z,1467327212.911 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-06-30T22:54:21.182Z,1467327261.182 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:54:23.193Z,1467327263.193 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:56:17.630Z,1467327377.630 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:56:17.632Z,1467327377.632 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:56:23.500Z,1467327383.500 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:56:25.510Z,1467327385.510 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:58:25.534Z,1467327505.534 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T22:58:27.543Z,1467327507.543 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T22:59:18.267Z,1467327558.267 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T22:59:18.269Z,1467327558.269 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:00:27.560Z,1467327627.560 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:00:27.766Z,1467327627.766 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-06-30T23:02:19.281Z,1467327739.281 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:02:19.283Z,1467327739.283 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:03:50.453Z,1467327830.453 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-06-30T23:05:20.477Z,1467327920.477 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:05:20.479Z,1467327920.479 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:08:21.494Z,1467328101.494 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:08:21.497Z,1467328101.497 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:10:28.172Z,1467328228.172 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:11:22.979Z,1467328282.979 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:11:22.981Z,1467328282.981 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:12:28.480Z,1467328348.480 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:12:30.495Z,1467328350.495 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:14:08.407Z,1467328448.407 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-06-30T23:14:23.631Z,1467328463.631 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:14:23.634Z,1467328463.634 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:14:30.516Z,1467328470.516 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:14:32.527Z,1467328472.527 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:16:32.862Z,1467328592.862 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:16:34.885Z,1467328594.885 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:17:24.757Z,1467328644.757 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:17:24.775Z,1467328644.775 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:18:35.276Z,1467328715.276 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:18:37.287Z,1467328717.287 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:20:26.310Z,1467328826.310 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:20:26.312Z,1467328826.312 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:20:37.618Z,1467328837.618 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:20:38.045Z,1467328838.045 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-06-30T23:23:27.124Z,1467329007.124 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:23:27.126Z,1467329007.126 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:24:26.155Z,1467329066.155 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-06-30T23:24:26.188Z,1467329066.188 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-06-30T23:26:28.230Z,1467329188.230 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:26:28.231Z,1467329188.231 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:29:29.487Z,1467329369.487 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:29:29.489Z,1467329369.489 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:30:38.228Z,1467329438.228 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:32:30.061Z,1467329550.061 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:32:30.063Z,1467329550.063 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:32:38.284Z,1467329558.284 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:32:40.298Z,1467329560.298 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:34:40.669Z,1467329680.669 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:34:42.679Z,1467329682.679 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:35:31.412Z,1467329731.412 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:35:31.414Z,1467329731.414 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:36:41.436Z,1467329801.436 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-06-30T23:36:43.042Z,1467329803.042 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:36:45.053Z,1467329805.053 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:38:31.962Z,1467329911.962 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:38:31.980Z,1467329911.980 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:38:45.060Z,1467329925.060 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:38:47.471Z,1467329927.471 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:40:47.510Z,1467330047.510 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:40:47.995Z,1467330047.995 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-06-30T23:41:33.244Z,1467330093.244 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:41:33.246Z,1467330093.246 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:44:34.341Z,1467330274.341 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:44:34.343Z,1467330274.343 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:46:59.295Z,1467330419.295 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-06-30T23:47:34.982Z,1467330454.982 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:47:34.984Z,1467330454.984 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:50:36.106Z,1467330636.106 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:50:36.109Z,1467330636.109 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:50:48.152Z,1467330648.152 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:52:48.219Z,1467330768.219 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:52:50.229Z,1467330770.229 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:53:36.794Z,1467330816.794 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:53:36.796Z,1467330816.796 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:54:50.253Z,1467330890.253 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:54:52.262Z,1467330892.262 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:56:37.499Z,1467330997.499 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:56:37.502Z,1467330997.502 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:56:52.646Z,1467331012.646 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:56:54.656Z,1467331014.656 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:57:18.867Z,1467331038.867 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-06-30T23:58:40.028Z,1467331120.028 [CommandLine](IMPORTANT): got command burn 300.000000
2016-06-30T23:58:40.108Z,1467331120.108 [Default:CheckIn:Read_Iridium:A_Timeout:B](CRITICAL): Dropped weight due to communications timeout.
2016-06-30T23:58:55.032Z,1467331135.032 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-06-30T23:58:57.046Z,1467331137.046 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-06-30T23:59:38.472Z,1467331178.472 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-06-30T23:59:38.474Z,1467331178.474 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:00:57.349Z,1467331257.349 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:00:57.687Z,1467331257.687 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T00:02:39.695Z,1467331359.695 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:02:39.697Z,1467331359.697 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:03:40.113Z,1467331420.113 [CommandLine](IMPORTANT): Deactivating dropweight wire
2016-07-01T00:03:41.668Z,1467331421.668 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 130.251978 min 
2016-07-01T00:05:40.534Z,1467331540.534 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:05:40.540Z,1467331540.540 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:07:36.840Z,1467331656.840 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T00:08:41.262Z,1467331721.262 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:08:41.272Z,1467331721.272 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:10:57.988Z,1467331857.988 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:11:42.430Z,1467331902.430 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:11:42.432Z,1467331902.432 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:12:58.051Z,1467331978.051 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:13:00.061Z,1467331980.061 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:14:43.023Z,1467332083.023 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:14:43.025Z,1467332083.025 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:15:00.092Z,1467332100.092 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:15:02.102Z,1467332102.102 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:17:02.439Z,1467332222.439 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:17:04.452Z,1467332224.452 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:17:44.191Z,1467332264.191 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:17:44.194Z,1467332264.194 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:17:56.225Z,1467332276.225 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T00:17:56.259Z,1467332276.259 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-07-01T00:19:04.787Z,1467332344.787 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:19:06.798Z,1467332346.798 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:20:45.279Z,1467332445.279 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:20:45.281Z,1467332445.281 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:21:07.162Z,1467332467.162 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:21:07.750Z,1467332467.750 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T00:23:46.348Z,1467332626.348 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:23:46.350Z,1467332626.350 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:26:47.854Z,1467332807.854 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:26:47.856Z,1467332807.856 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:29:48.445Z,1467332988.445 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:29:48.460Z,1467332988.460 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:30:08.469Z,1467333008.469 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T00:31:07.771Z,1467333067.771 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:32:49.381Z,1467333169.381 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:32:49.382Z,1467333169.382 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:33:07.819Z,1467333187.819 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:33:09.837Z,1467333189.837 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:35:09.868Z,1467333309.868 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:35:11.894Z,1467333311.894 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:35:49.995Z,1467333349.995 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:35:50.017Z,1467333350.017 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:37:12.210Z,1467333432.210 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:37:14.219Z,1467333434.219 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:38:50.915Z,1467333530.915 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:38:50.918Z,1467333530.918 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:39:14.620Z,1467333554.620 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:39:17.034Z,1467333557.034 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:40:27.696Z,1467333627.696 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T00:41:17.096Z,1467333677.096 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:41:17.105Z,1467333677.105 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T00:41:52.360Z,1467333712.360 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:41:52.362Z,1467333712.362 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:44:53.117Z,1467333893.117 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:44:53.135Z,1467333893.135 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:47:54.129Z,1467334074.129 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:47:54.132Z,1467334074.132 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:50:47.209Z,1467334247.209 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T00:50:55.243Z,1467334255.243 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:50:55.245Z,1467334255.245 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:51:17.723Z,1467334277.723 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:53:18.111Z,1467334398.111 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:53:20.121Z,1467334400.121 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:53:56.073Z,1467334436.073 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:53:56.075Z,1467334436.075 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:55:20.153Z,1467334520.153 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:55:22.166Z,1467334522.166 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:56:57.236Z,1467334617.236 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:56:57.238Z,1467334617.238 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:57:22.518Z,1467334642.518 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:57:24.528Z,1467334644.528 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:59:24.900Z,1467334764.900 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T00:59:26.909Z,1467334766.909 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T00:59:58.023Z,1467334798.023 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T00:59:58.025Z,1467334798.025 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:01:05.272Z,1467334865.272 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T01:01:27.246Z,1467334887.246 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:01:27.343Z,1467334887.343 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T01:02:59.169Z,1467334979.169 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:02:59.200Z,1467334979.200 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:06:00.313Z,1467335160.313 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:06:00.315Z,1467335160.315 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:09:01.406Z,1467335341.406 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:09:01.408Z,1467335341.408 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:11:24.560Z,1467335484.560 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T01:11:24.633Z,1467335484.633 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-07-01T01:11:27.507Z,1467335487.507 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:12:02.592Z,1467335522.592 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:12:02.594Z,1467335522.594 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:13:27.907Z,1467335607.907 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:13:29.916Z,1467335609.916 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:15:03.493Z,1467335703.493 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:15:03.495Z,1467335703.495 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:15:30.245Z,1467335730.245 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:15:32.255Z,1467335732.255 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:17:32.283Z,1467335852.283 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:17:34.300Z,1467335854.300 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:18:05.011Z,1467335885.011 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:18:05.013Z,1467335885.013 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:19:34.675Z,1467335974.675 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:19:36.685Z,1467335976.685 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:21:05.645Z,1467336065.645 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:21:05.648Z,1467336065.648 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:21:36.749Z,1467336096.749 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:21:37.343Z,1467336097.343 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T01:23:37.925Z,1467336217.925 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T01:24:06.787Z,1467336246.787 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:24:06.790Z,1467336246.790 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:27:07.937Z,1467336427.937 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:27:07.939Z,1467336427.939 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:30:09.106Z,1467336609.106 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:30:09.109Z,1467336609.109 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:31:36.970Z,1467336696.970 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:33:09.970Z,1467336789.970 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:33:09.972Z,1467336789.972 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:33:37.326Z,1467336817.326 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:33:39.336Z,1467336819.336 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:33:55.322Z,1467336835.322 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T01:35:39.679Z,1467336939.679 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:35:41.689Z,1467336941.689 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:36:10.775Z,1467336970.775 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:36:10.777Z,1467336970.777 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:37:41.721Z,1467337061.721 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:37:44.131Z,1467337064.131 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:39:11.958Z,1467337151.958 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:39:11.961Z,1467337151.961 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:39:44.234Z,1467337184.234 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:39:46.249Z,1467337186.249 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:41:46.606Z,1467337306.606 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:41:46.886Z,1467337306.886 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T01:42:13.315Z,1467337333.315 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:42:13.317Z,1467337333.317 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:44:13.112Z,1467337453.112 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T01:45:14.895Z,1467337514.895 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:45:14.897Z,1467337514.897 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:48:15.908Z,1467337695.908 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:48:15.911Z,1467337695.911 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:51:16.935Z,1467337876.935 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:51:16.937Z,1467337876.937 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:51:46.818Z,1467337906.818 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:53:46.873Z,1467338026.873 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:53:48.883Z,1467338028.883 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:54:18.086Z,1467338058.086 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:54:18.088Z,1467338058.088 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:54:32.545Z,1467338072.545 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T01:55:49.279Z,1467338149.279 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:55:51.289Z,1467338151.289 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:57:19.057Z,1467338239.057 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:57:19.059Z,1467338239.059 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T01:57:51.360Z,1467338271.360 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:57:53.378Z,1467338273.378 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T01:59:53.422Z,1467338393.422 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T01:59:55.836Z,1467338395.836 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:00:19.867Z,1467338419.867 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:00:19.869Z,1467338419.869 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:01:56.156Z,1467338516.156 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:01:56.713Z,1467338516.713 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T02:03:20.987Z,1467338600.987 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:03:20.990Z,1467338600.990 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:04:52.782Z,1467338692.782 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T02:04:52.857Z,1467338692.857 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-07-01T02:06:22.017Z,1467338782.017 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:06:22.019Z,1467338782.019 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:08:42.193Z,1467338922.193 [CommandLine](IMPORTANT): got command burn 300.000000
2016-07-01T02:08:42.444Z,1467338922.444 [Default:CheckIn:Read_Iridium:A_Timeout:B](CRITICAL): Dropped weight due to communications timeout.
2016-07-01T02:09:22.844Z,1467338962.844 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:09:22.847Z,1467338962.847 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:11:56.766Z,1467339116.766 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:12:23.654Z,1467339143.654 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:12:23.656Z,1467339143.656 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:13:42.265Z,1467339222.265 [CommandLine](IMPORTANT): Deactivating dropweight wire
2016-07-01T02:13:44.048Z,1467339224.048 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 260.291732 min 
2016-07-01T02:13:56.809Z,1467339236.809 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:13:58.827Z,1467339238.827 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:15:24.834Z,1467339324.834 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:15:24.837Z,1467339324.837 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:15:59.170Z,1467339359.170 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:16:01.180Z,1467339361.180 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:17:05.214Z,1467339425.214 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T02:18:01.207Z,1467339481.207 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:18:03.218Z,1467339483.218 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:18:26.062Z,1467339506.062 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:18:26.066Z,1467339506.066 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:20:03.229Z,1467339603.229 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:20:05.243Z,1467339605.243 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:21:27.212Z,1467339687.212 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:21:27.214Z,1467339687.214 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:22:05.551Z,1467339725.551 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:22:05.776Z,1467339725.776 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T02:24:28.345Z,1467339868.345 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:24:28.351Z,1467339868.351 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:27:25.712Z,1467340045.712 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T02:27:29.347Z,1467340049.347 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:27:29.349Z,1467340049.349 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:30:30.451Z,1467340230.451 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:30:30.453Z,1467340230.453 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:32:05.796Z,1467340325.796 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:33:31.967Z,1467340411.967 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:33:31.969Z,1467340411.969 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:34:06.180Z,1467340446.180 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:34:08.194Z,1467340448.194 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:36:08.506Z,1467340568.506 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:36:10.516Z,1467340570.516 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:36:32.906Z,1467340592.906 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:36:32.908Z,1467340592.908 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:36:32.948Z,1467340592.948 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-07-01T02:36:32.949Z,1467340592.949 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-07-01T02:37:45.152Z,1467340665.152 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T02:38:10.840Z,1467340690.840 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:38:12.853Z,1467340692.853 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:40:13.249Z,1467340813.249 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:40:15.259Z,1467340815.259 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:42:15.594Z,1467340935.594 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:42:15.687Z,1467340935.687 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T02:48:03.490Z,1467341283.490 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T02:52:16.249Z,1467341536.249 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:54:16.325Z,1467341656.325 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:54:18.338Z,1467341658.338 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:54:33.921Z,1467341673.921 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:54:33.923Z,1467341673.923 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:56:18.341Z,1467341778.341 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:56:20.351Z,1467341780.351 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T02:57:34.728Z,1467341854.728 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:57:34.734Z,1467341854.734 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T02:58:20.687Z,1467341900.687 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T02:58:21.815Z,1467341901.815 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T02:58:21.850Z,1467341901.850 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-07-01T02:58:22.697Z,1467341902.697 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:00:23.065Z,1467342023.065 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:00:25.079Z,1467342025.079 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:00:35.838Z,1467342035.838 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:00:35.840Z,1467342035.840 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:02:25.426Z,1467342145.426 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:02:25.543Z,1467342145.543 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T03:03:36.983Z,1467342216.983 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:03:36.985Z,1467342216.985 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:06:38.083Z,1467342398.083 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:06:38.085Z,1467342398.085 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:09:38.745Z,1467342578.745 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:09:38.748Z,1467342578.748 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:10:35.106Z,1467342635.106 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T03:12:26.100Z,1467342746.100 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:12:39.544Z,1467342759.544 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:12:39.550Z,1467342759.550 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:14:26.128Z,1467342866.128 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:14:28.138Z,1467342868.138 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:15:40.400Z,1467342940.400 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:15:40.407Z,1467342940.407 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:16:28.485Z,1467342988.485 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:16:30.496Z,1467342990.496 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:18:30.815Z,1467343110.815 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:18:32.829Z,1467343112.829 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:18:41.418Z,1467343121.418 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:18:41.420Z,1467343121.420 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:20:33.181Z,1467343233.181 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:20:35.190Z,1467343235.190 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:20:56.313Z,1467343256.313 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T03:21:42.457Z,1467343302.457 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:21:42.460Z,1467343302.460 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:22:35.526Z,1467343355.526 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:22:35.632Z,1467343355.632 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T03:24:43.315Z,1467343483.315 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:24:43.316Z,1467343483.316 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:27:44.255Z,1467343664.255 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:27:44.272Z,1467343664.272 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:30:45.225Z,1467343845.225 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:30:45.227Z,1467343845.227 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:31:13.862Z,1467343873.862 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T03:32:35.768Z,1467343955.768 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:33:45.813Z,1467344025.813 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:33:45.814Z,1467344025.814 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:34:35.775Z,1467344075.775 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:34:37.790Z,1467344077.790 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:36:38.104Z,1467344198.104 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:36:40.123Z,1467344200.123 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:36:47.267Z,1467344207.267 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:36:47.269Z,1467344207.269 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:38:40.466Z,1467344320.466 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:38:42.878Z,1467344322.878 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:39:48.331Z,1467344388.331 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:39:48.333Z,1467344388.333 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:40:43.188Z,1467344443.188 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:40:45.599Z,1467344445.599 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:41:31.416Z,1467344491.416 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T03:42:45.923Z,1467344565.923 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:42:46.221Z,1467344566.221 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T03:42:49.480Z,1467344569.480 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:42:49.481Z,1467344569.481 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:45:50.395Z,1467344750.395 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:45:50.397Z,1467344750.397 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:48:51.514Z,1467344931.514 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:48:51.517Z,1467344931.517 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:51:20.974Z,1467345080.974 [CBIT](IMPORTANT): Beginning GF scan
2016-07-01T03:51:49.326Z,1467345109.326 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T03:51:49.426Z,1467345109.426 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-07-01T03:51:52.548Z,1467345112.548 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:51:52.550Z,1467345112.550 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:52:46.505Z,1467345166.505 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:54:46.893Z,1467345286.893 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:54:49.303Z,1467345289.303 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:54:53.579Z,1467345293.579 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:54:53.581Z,1467345293.581 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:56:49.682Z,1467345409.682 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:56:51.693Z,1467345411.693 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T03:57:54.577Z,1467345474.577 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:57:54.579Z,1467345474.579 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T03:58:51.736Z,1467345531.736 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T03:58:53.746Z,1467345533.746 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:00:54.119Z,1467345654.119 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:00:55.466Z,1467345655.466 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:00:55.468Z,1467345655.468 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:00:56.132Z,1467345656.132 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:02:56.476Z,1467345776.476 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:02:56.737Z,1467345776.737 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T04:03:56.609Z,1467345836.609 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:03:56.612Z,1467345836.612 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:04:02.566Z,1467345842.566 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T04:06:58.142Z,1467346018.142 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:06:58.144Z,1467346018.144 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:09:59.007Z,1467346199.007 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:09:59.009Z,1467346199.009 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:12:57.082Z,1467346377.082 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:13:00.400Z,1467346380.400 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:13:00.402Z,1467346380.402 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:14:20.808Z,1467346460.808 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T04:14:57.485Z,1467346497.485 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:14:59.496Z,1467346499.496 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:16:01.089Z,1467346561.089 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:16:01.116Z,1467346561.116 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:16:59.840Z,1467346619.840 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:17:01.854Z,1467346621.854 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:18:44.392Z,1467346724.392 [CommandLine](IMPORTANT): got command burn 300.000000
2016-07-01T04:18:44.468Z,1467346724.468 [Default:CheckIn:Read_Iridium:A_Timeout:B](CRITICAL): Dropped weight due to communications timeout.
2016-07-01T04:19:01.886Z,1467346741.886 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:19:02.113Z,1467346742.113 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:19:02.115Z,1467346742.115 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:19:03.903Z,1467346743.903 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:21:04.306Z,1467346864.306 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:21:06.316Z,1467346866.316 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:22:02.887Z,1467346922.887 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:22:02.890Z,1467346922.890 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:23:06.705Z,1467346986.705 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:23:06.919Z,1467346986.919 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T04:23:44.489Z,1467347024.489 [CommandLine](IMPORTANT): Deactivating dropweight wire
2016-07-01T04:23:45.666Z,1467347025.666 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 390.319206 min 
2016-07-01T04:24:40.037Z,1467347080.037 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T04:25:03.667Z,1467347103.667 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:25:03.669Z,1467347103.669 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:28:04.466Z,1467347284.466 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:28:04.468Z,1467347284.468 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:31:05.803Z,1467347465.803 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:31:05.805Z,1467347465.805 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:33:07.338Z,1467347587.338 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:34:06.536Z,1467347646.536 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:34:06.538Z,1467347646.538 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:34:57.949Z,1467347697.949 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T04:35:07.357Z,1467347707.357 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:35:09.372Z,1467347709.372 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:37:07.420Z,1467347827.420 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:37:07.423Z,1467347827.423 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:37:09.703Z,1467347829.703 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:37:11.713Z,1467347831.713 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:39:11.717Z,1467347951.717 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:39:13.726Z,1467347953.726 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:40:08.408Z,1467348008.408 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:40:08.410Z,1467348008.410 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:41:14.039Z,1467348074.039 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:41:16.052Z,1467348076.052 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:43:09.481Z,1467348189.481 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:43:09.483Z,1467348189.483 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:43:16.420Z,1467348196.420 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:43:16.724Z,1467348196.724 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T04:45:16.386Z,1467348316.386 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T04:45:16.456Z,1467348316.456 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-07-01T04:46:10.814Z,1467348370.814 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:46:10.815Z,1467348370.815 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:49:12.140Z,1467348552.140 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:49:12.142Z,1467348552.142 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:52:12.795Z,1467348732.795 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:52:12.797Z,1467348732.797 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:53:17.046Z,1467348797.046 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:55:13.840Z,1467348913.840 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:55:13.842Z,1467348913.842 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:55:17.122Z,1467348917.122 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:55:19.135Z,1467348919.135 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:57:19.447Z,1467349039.447 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:57:21.457Z,1467349041.457 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T04:57:32.624Z,1467349052.624 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T04:58:14.826Z,1467349094.826 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:58:14.833Z,1467349094.833 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T04:59:21.833Z,1467349161.833 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T04:59:23.847Z,1467349163.847 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:01:15.682Z,1467349275.682 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:01:15.684Z,1467349275.684 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:01:24.178Z,1467349284.178 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:01:26.193Z,1467349286.193 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:03:26.564Z,1467349406.564 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:03:26.819Z,1467349406.819 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T05:04:16.653Z,1467349456.653 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:04:16.656Z,1467349456.656 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:07:17.815Z,1467349637.815 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:07:17.817Z,1467349637.817 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:07:51.023Z,1467349671.023 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T05:10:18.801Z,1467349818.801 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:10:18.803Z,1467349818.803 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:13:19.648Z,1467349999.648 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:13:19.650Z,1467349999.650 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:13:27.210Z,1467350007.210 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:15:27.282Z,1467350127.282 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:15:29.292Z,1467350129.292 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:16:20.528Z,1467350180.528 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:16:20.530Z,1467350180.530 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:17:29.607Z,1467350249.607 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:17:31.617Z,1467350251.617 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:18:09.241Z,1467350289.241 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T05:19:21.196Z,1467350361.196 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:19:21.198Z,1467350361.198 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:19:32.008Z,1467350372.008 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:19:34.018Z,1467350374.018 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:21:34.415Z,1467350494.415 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:21:36.428Z,1467350496.428 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:22:22.430Z,1467350542.430 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:22:22.432Z,1467350542.432 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:23:36.812Z,1467350616.812 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:23:36.959Z,1467350616.959 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T05:25:23.389Z,1467350723.389 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:25:23.391Z,1467350723.391 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:28:24.603Z,1467350904.603 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:28:24.622Z,1467350904.622 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:28:28.633Z,1467350908.633 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T05:31:25.746Z,1467351085.746 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:31:25.749Z,1467351085.749 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:33:37.455Z,1467351217.455 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:34:26.543Z,1467351266.543 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:34:26.545Z,1467351266.545 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:35:37.474Z,1467351337.474 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:35:39.483Z,1467351339.483 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:37:27.537Z,1467351447.537 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:37:27.539Z,1467351447.539 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:37:39.855Z,1467351459.855 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:37:41.865Z,1467351461.865 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:38:47.011Z,1467351527.011 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T05:38:47.078Z,1467351527.078 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-07-01T05:39:42.269Z,1467351582.269 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:39:44.280Z,1467351584.280 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:40:28.634Z,1467351628.634 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:40:28.636Z,1467351628.636 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:41:44.610Z,1467351704.610 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:41:47.022Z,1467351707.022 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:43:29.794Z,1467351809.794 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:43:29.796Z,1467351809.796 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:43:47.365Z,1467351827.365 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:43:47.486Z,1467351827.486 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T05:46:31.248Z,1467351991.248 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:46:31.250Z,1467351991.250 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:49:32.112Z,1467352172.112 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:49:32.114Z,1467352172.114 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:50:59.379Z,1467352259.379 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T05:52:32.914Z,1467352352.914 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:52:32.916Z,1467352352.916 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:53:47.983Z,1467352427.983 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:55:34.090Z,1467352534.090 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:55:34.092Z,1467352534.092 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:55:48.006Z,1467352548.006 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:55:50.016Z,1467352550.016 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:57:50.036Z,1467352670.036 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:57:52.046Z,1467352672.046 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T05:58:35.043Z,1467352715.043 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:58:35.045Z,1467352715.045 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T05:59:52.372Z,1467352792.372 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T05:59:54.387Z,1467352794.387 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:01:18.620Z,1467352878.620 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T06:01:35.851Z,1467352895.851 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:01:35.853Z,1467352895.853 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:01:54.719Z,1467352914.719 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:01:56.729Z,1467352916.729 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:03:57.129Z,1467353037.129 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:03:57.483Z,1467353037.483 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T06:04:36.883Z,1467353076.883 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:04:36.885Z,1467353076.885 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:07:38.123Z,1467353258.123 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:07:38.125Z,1467353258.125 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:10:39.449Z,1467353439.449 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:10:39.451Z,1467353439.451 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:11:39.374Z,1467353499.374 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T06:13:40.462Z,1467353620.462 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:13:40.464Z,1467353620.464 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:13:57.314Z,1467353637.314 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:15:57.690Z,1467353757.690 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:15:59.699Z,1467353759.699 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:16:41.230Z,1467353801.230 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:16:41.237Z,1467353801.237 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:17:59.756Z,1467353879.756 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:18:01.765Z,1467353881.765 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:19:42.379Z,1467353982.379 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:19:42.381Z,1467353982.381 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:20:02.085Z,1467354002.085 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:20:04.095Z,1467354004.095 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:21:58.906Z,1467354118.906 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T06:22:04.466Z,1467354124.466 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:22:06.476Z,1467354126.476 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:22:43.459Z,1467354163.459 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:22:43.461Z,1467354163.461 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:24:06.495Z,1467354246.495 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:24:06.516Z,1467354246.516 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T06:25:44.028Z,1467354344.028 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:25:44.030Z,1467354344.030 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:28:44.955Z,1467354524.955 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:28:44.985Z,1467354524.985 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:28:46.153Z,1467354526.153 [CommandLine](IMPORTANT): got command burn 300.000000
2016-07-01T06:28:46.544Z,1467354526.544 [Default:CheckIn:Read_Iridium:A_Timeout:B](CRITICAL): Dropped weight due to communications timeout.
2016-07-01T06:31:45.784Z,1467354705.784 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:31:45.786Z,1467354705.786 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:32:18.102Z,1467354738.102 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T06:32:18.176Z,1467354738.176 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-07-01T06:33:46.184Z,1467354826.184 [CommandLine](IMPORTANT): Deactivating dropweight wire
2016-07-01T06:33:48.125Z,1467354828.125 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 520.359701 min 
2016-07-01T06:34:06.737Z,1467354846.737 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:34:46.541Z,1467354886.541 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:34:46.544Z,1467354886.544 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:36:07.066Z,1467354967.066 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:36:09.079Z,1467354969.079 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:37:47.366Z,1467355067.366 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:37:47.368Z,1467355067.368 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:38:09.402Z,1467355089.402 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:38:11.413Z,1467355091.413 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:40:11.740Z,1467355211.740 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:40:13.759Z,1467355213.759 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:40:48.401Z,1467355248.401 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:40:48.424Z,1467355248.424 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:42:14.126Z,1467355334.126 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:42:16.140Z,1467355336.140 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:43:49.322Z,1467355429.322 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:43:49.324Z,1467355429.324 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:44:16.504Z,1467355456.504 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:44:16.979Z,1467355456.979 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T06:44:33.451Z,1467355473.451 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T06:46:50.341Z,1467355610.341 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:46:50.343Z,1467355610.343 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:49:51.684Z,1467355791.684 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:49:51.686Z,1467355791.686 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:52:52.692Z,1467355972.692 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:52:52.694Z,1467355972.694 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:54:16.717Z,1467356056.717 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:54:52.372Z,1467356092.372 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T06:55:53.890Z,1467356153.890 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:55:53.904Z,1467356153.904 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:56:17.056Z,1467356177.056 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:56:19.468Z,1467356179.468 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:58:19.579Z,1467356299.579 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T06:58:21.589Z,1467356301.589 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T06:58:55.338Z,1467356335.338 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T06:58:55.340Z,1467356335.340 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:00:21.956Z,1467356421.956 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:00:23.971Z,1467356423.971 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:01:56.360Z,1467356516.360 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:01:56.362Z,1467356516.362 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:02:24.371Z,1467356544.371 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:02:26.384Z,1467356546.384 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:04:26.467Z,1467356666.467 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:04:26.601Z,1467356666.601 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T07:04:57.384Z,1467356697.384 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:04:57.386Z,1467356697.386 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:05:13.924Z,1467356713.924 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T07:07:58.294Z,1467356878.294 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:07:58.296Z,1467356878.296 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:10:58.962Z,1467357058.962 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:10:58.964Z,1467357058.964 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:13:59.475Z,1467357239.475 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:13:59.477Z,1467357239.477 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:14:27.097Z,1467357267.097 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:15:31.517Z,1467357331.517 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T07:16:27.498Z,1467357387.498 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:16:29.508Z,1467357389.508 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:17:00.524Z,1467357420.524 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:17:00.526Z,1467357420.526 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:18:29.515Z,1467357509.515 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:18:31.524Z,1467357511.524 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:20:01.217Z,1467357601.217 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:20:01.218Z,1467357601.218 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:20:31.584Z,1467357631.584 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:20:33.594Z,1467357633.594 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:22:33.957Z,1467357753.957 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:22:35.968Z,1467357755.968 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:23:02.115Z,1467357782.115 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:23:02.148Z,1467357782.148 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:24:36.307Z,1467357876.307 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:24:36.785Z,1467357876.785 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T07:25:49.569Z,1467357949.569 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T07:25:49.603Z,1467357949.603 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-07-01T07:26:03.178Z,1467357963.178 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:26:03.180Z,1467357963.180 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:29:04.285Z,1467358144.285 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:29:04.287Z,1467358144.287 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:32:05.796Z,1467358325.796 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:32:05.798Z,1467358325.798 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:34:36.509Z,1467358476.509 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:35:06.933Z,1467358506.933 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:35:06.935Z,1467358506.935 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:36:36.839Z,1467358596.839 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:36:39.251Z,1467358599.251 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:38:05.918Z,1467358685.918 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T07:38:07.943Z,1467358687.943 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:38:07.945Z,1467358687.945 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:38:39.262Z,1467358719.262 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:38:41.681Z,1467358721.681 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:40:42.029Z,1467358842.029 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:40:44.043Z,1467358844.043 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:41:08.852Z,1467358868.852 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:41:08.854Z,1467358868.854 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:42:44.411Z,1467358964.411 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:42:46.420Z,1467358966.420 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:44:10.388Z,1467359050.388 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:44:10.390Z,1467359050.390 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:44:46.523Z,1467359086.523 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:44:47.117Z,1467359087.117 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T07:47:10.979Z,1467359230.979 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:47:10.980Z,1467359230.980 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:48:24.120Z,1467359304.120 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T07:50:12.048Z,1467359412.048 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:50:12.050Z,1467359412.050 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:53:13.206Z,1467359593.206 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:53:13.207Z,1467359593.207 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T07:53:13.219Z,1467359593.219 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-07-01T07:53:13.219Z,1467359593.219 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-07-01T07:54:46.721Z,1467359686.721 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:56:47.117Z,1467359807.117 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:56:49.127Z,1467359809.127 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T07:58:43.253Z,1467359923.253 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T07:58:49.170Z,1467359929.170 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T07:58:51.180Z,1467359931.180 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:00:51.219Z,1467360051.219 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:00:53.233Z,1467360053.233 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:02:53.589Z,1467360173.589 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:02:55.599Z,1467360175.599 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:04:55.987Z,1467360295.987 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:04:56.268Z,1467360296.268 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T08:09:02.553Z,1467360542.553 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T08:11:14.279Z,1467360674.279 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:11:14.281Z,1467360674.281 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:14:15.597Z,1467360855.597 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:14:15.599Z,1467360855.599 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:14:56.985Z,1467360896.985 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:16:57.004Z,1467361017.004 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:16:59.014Z,1467361019.014 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:17:16.250Z,1467361036.250 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:17:16.252Z,1467361036.252 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:18:59.038Z,1467361139.038 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:19:01.048Z,1467361141.048 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:19:21.065Z,1467361161.065 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T08:19:21.145Z,1467361161.145 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-07-01T08:20:17.097Z,1467361217.097 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:20:17.099Z,1467361217.099 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:21:01.372Z,1467361261.372 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:21:03.382Z,1467361263.382 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:23:03.389Z,1467361383.389 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:23:05.398Z,1467361385.398 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:23:18.227Z,1467361398.227 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:23:18.229Z,1467361398.229 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:25:05.729Z,1467361505.729 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:25:05.767Z,1467361505.767 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T08:26:19.079Z,1467361579.079 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:26:19.081Z,1467361579.081 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:29:20.610Z,1467361760.610 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:29:20.612Z,1467361760.612 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:31:33.231Z,1467361893.231 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T08:32:21.371Z,1467361941.371 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:32:21.373Z,1467361941.373 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:35:05.968Z,1467362105.968 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:35:22.339Z,1467362122.339 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:35:22.345Z,1467362122.345 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:37:06.011Z,1467362226.011 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:37:08.022Z,1467362228.022 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:38:23.182Z,1467362303.182 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:38:23.184Z,1467362303.184 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:38:48.524Z,1467362328.524 [CommandLine](IMPORTANT): got command burn 300.000000
2016-07-01T08:38:48.876Z,1467362328.876 [Default:CheckIn:Read_Iridium:A_Timeout:B](CRITICAL): Dropped weight due to communications timeout.
2016-07-01T08:39:08.056Z,1467362348.056 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:39:10.071Z,1467362350.071 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:41:10.390Z,1467362470.390 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:41:12.403Z,1467362472.403 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:41:24.091Z,1467362484.091 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:41:24.094Z,1467362484.094 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:41:50.817Z,1467362510.817 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T08:43:12.439Z,1467362592.439 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:43:14.454Z,1467362594.454 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:43:48.597Z,1467362628.597 [CommandLine](IMPORTANT): Deactivating dropweight wire
2016-07-01T08:43:50.060Z,1467362630.060 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 650.392578 min 
2016-07-01T08:44:25.243Z,1467362665.243 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:44:25.245Z,1467362665.245 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:45:14.815Z,1467362714.815 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:45:14.890Z,1467362714.890 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T08:47:26.059Z,1467362846.059 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:47:26.061Z,1467362846.061 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:50:27.190Z,1467363027.190 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:50:27.197Z,1467363027.197 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:52:10.269Z,1467363130.269 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T08:53:28.287Z,1467363208.287 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:53:28.289Z,1467363208.289 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:55:15.423Z,1467363315.423 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:56:29.315Z,1467363389.315 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:56:29.317Z,1467363389.317 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:57:15.515Z,1467363435.515 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:57:17.524Z,1467363437.524 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:59:17.588Z,1467363557.588 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T08:59:19.998Z,1467363559.998 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T08:59:30.328Z,1467363570.328 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T08:59:30.330Z,1467363570.330 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:01:20.034Z,1467363680.034 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:01:22.047Z,1467363682.047 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:02:31.224Z,1467363751.224 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:02:31.226Z,1467363751.226 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:02:31.549Z,1467363751.549 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T09:03:22.127Z,1467363802.127 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:03:24.542Z,1467363804.542 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:05:24.905Z,1467363924.905 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:05:25.239Z,1467363925.239 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T09:05:32.141Z,1467363932.141 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:05:32.147Z,1467363932.147 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:08:33.583Z,1467364113.583 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:08:33.585Z,1467364113.585 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:11:34.113Z,1467364294.113 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:11:34.115Z,1467364294.115 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:12:48.922Z,1467364368.922 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T09:12:49.005Z,1467364369.005 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-07-01T09:14:34.938Z,1467364474.938 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:14:34.940Z,1467364474.940 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:15:25.171Z,1467364525.171 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:17:25.514Z,1467364645.514 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:17:27.524Z,1467364647.524 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:17:36.171Z,1467364656.171 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:17:36.173Z,1467364656.173 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:19:27.884Z,1467364767.884 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:19:29.894Z,1467364769.894 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:20:36.783Z,1467364836.783 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:20:36.786Z,1467364836.786 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:21:30.282Z,1467364890.282 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:21:32.292Z,1467364892.292 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:23:32.307Z,1467365012.307 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:23:34.316Z,1467365014.316 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:23:37.969Z,1467365017.969 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:23:37.991Z,1467365017.991 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:25:03.204Z,1467365103.204 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T09:25:34.336Z,1467365134.336 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:25:34.555Z,1467365134.555 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T09:26:39.128Z,1467365199.128 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:26:39.130Z,1467365199.130 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:29:39.981Z,1467365379.981 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:29:39.983Z,1467365379.983 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:32:41.010Z,1467365561.010 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:32:41.012Z,1467365561.012 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:35:21.743Z,1467365721.743 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T09:35:34.982Z,1467365734.982 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:35:41.807Z,1467365741.807 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:35:41.810Z,1467365741.810 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:37:35.354Z,1467365855.354 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:37:37.368Z,1467365857.368 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:38:42.888Z,1467365922.888 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:38:42.890Z,1467365922.890 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:39:37.416Z,1467365977.416 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:39:39.429Z,1467365979.429 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:41:39.753Z,1467366099.753 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:41:41.763Z,1467366101.763 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:41:43.773Z,1467366103.773 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:41:43.775Z,1467366103.775 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:43:42.142Z,1467366222.142 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:43:44.153Z,1467366224.153 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:44:44.629Z,1467366284.629 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:44:44.631Z,1467366284.631 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:45:42.967Z,1467366342.967 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T09:45:44.520Z,1467366344.520 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:45:44.643Z,1467366344.643 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T09:47:45.548Z,1467366465.548 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:47:45.550Z,1467366465.550 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:50:46.656Z,1467366646.656 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:50:46.658Z,1467366646.658 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:51:47.707Z,1467366707.707 [CBIT](IMPORTANT): Beginning GF scan
2016-07-01T09:53:47.354Z,1467366827.354 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:53:47.357Z,1467366827.357 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:55:45.163Z,1467366945.163 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:56:03.224Z,1467366963.224 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T09:56:48.622Z,1467367008.622 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:56:48.624Z,1467367008.624 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:57:45.174Z,1467367065.174 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:57:47.183Z,1467367067.183 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T09:59:47.527Z,1467367187.527 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T09:59:49.265Z,1467367189.265 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:59:49.267Z,1467367189.267 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T09:59:49.542Z,1467367189.542 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:01:49.884Z,1467367309.884 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:01:51.895Z,1467367311.895 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:02:49.923Z,1467367369.923 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:02:49.924Z,1467367369.924 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:03:52.299Z,1467367432.299 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:03:54.309Z,1467367434.309 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:05:50.843Z,1467367550.843 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:05:50.844Z,1467367550.844 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:05:54.336Z,1467367554.336 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:05:54.468Z,1467367554.468 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T10:06:22.147Z,1467367582.147 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T10:06:22.220Z,1467367582.220 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-07-01T10:08:51.798Z,1467367731.798 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:08:51.800Z,1467367731.800 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:11:53.353Z,1467367913.353 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:11:53.355Z,1467367913.355 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:14:54.019Z,1467368094.019 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:14:54.022Z,1467368094.022 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:15:54.561Z,1467368154.561 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:17:54.630Z,1467368274.630 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:17:54.633Z,1467368274.633 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:17:54.901Z,1467368274.901 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:17:56.915Z,1467368276.915 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:18:38.151Z,1467368318.151 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T10:19:56.931Z,1467368396.931 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:19:58.952Z,1467368398.952 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:20:55.742Z,1467368455.742 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:20:55.744Z,1467368455.744 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:21:59.344Z,1467368519.344 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:22:01.354Z,1467368521.354 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:23:56.570Z,1467368636.570 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:23:56.573Z,1467368636.573 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:24:01.361Z,1467368641.361 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:24:03.376Z,1467368643.376 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:26:03.752Z,1467368763.752 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:26:03.868Z,1467368763.868 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T10:26:57.735Z,1467368817.735 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:26:57.738Z,1467368817.738 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:28:56.435Z,1467368936.435 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T10:29:59.197Z,1467368999.197 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:29:59.199Z,1467368999.199 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:33:00.285Z,1467369180.285 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:33:00.287Z,1467369180.287 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:36:01.318Z,1467369361.318 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:36:01.321Z,1467369361.321 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:36:04.333Z,1467369364.333 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:38:04.637Z,1467369484.637 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:38:06.654Z,1467369486.654 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:39:03.088Z,1467369543.088 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:39:03.090Z,1467369543.090 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:39:15.603Z,1467369555.603 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T10:40:06.993Z,1467369606.993 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:40:09.008Z,1467369609.008 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:42:03.663Z,1467369723.663 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:42:03.665Z,1467369723.665 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:42:09.036Z,1467369729.036 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:42:11.049Z,1467369731.049 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:44:11.406Z,1467369851.406 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:44:13.420Z,1467369853.420 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:45:04.625Z,1467369904.625 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:45:04.628Z,1467369904.628 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:46:13.447Z,1467369973.447 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:46:13.710Z,1467369973.710 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T10:48:05.779Z,1467370085.779 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:48:05.781Z,1467370085.781 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:48:50.393Z,1467370130.393 [CommandLine](IMPORTANT): got command burn 300.000000
2016-07-01T10:48:51.142Z,1467370131.142 [Default:CheckIn:Read_Iridium:A_Timeout:B](CRITICAL): Dropped weight due to communications timeout.
2016-07-01T10:49:34.371Z,1467370174.371 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T10:51:06.824Z,1467370266.824 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:51:06.826Z,1467370266.826 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:53:50.473Z,1467370430.473 [CommandLine](IMPORTANT): Deactivating dropweight wire
2016-07-01T10:53:52.414Z,1467370432.414 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 780.431576 min 
2016-07-01T10:54:07.603Z,1467370447.603 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:54:07.605Z,1467370447.605 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:56:14.049Z,1467370574.049 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:57:08.811Z,1467370628.811 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:57:08.815Z,1467370628.815 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T10:58:14.375Z,1467370694.375 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T10:58:16.386Z,1467370696.386 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T10:59:55.919Z,1467370795.919 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T10:59:55.975Z,1467370795.975 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-07-01T11:00:09.940Z,1467370809.940 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:00:09.942Z,1467370809.942 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:00:16.390Z,1467370816.390 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T11:00:18.399Z,1467370818.399 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T11:02:18.707Z,1467370938.707 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T11:02:20.741Z,1467370940.741 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T11:03:10.995Z,1467370990.995 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:03:10.997Z,1467370990.997 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:04:20.757Z,1467371060.757 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T11:04:22.766Z,1467371062.766 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T11:06:11.849Z,1467371171.849 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:06:11.852Z,1467371171.852 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:06:23.078Z,1467371183.078 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T11:06:23.788Z,1467371183.788 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T11:09:12.769Z,1467371352.769 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:09:12.771Z,1467371352.771 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:12:07.941Z,1467371527.941 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T11:12:13.587Z,1467371533.587 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:12:13.589Z,1467371533.589 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:15:14.708Z,1467371714.708 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:15:14.710Z,1467371714.710 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:16:23.688Z,1467371783.688 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T11:18:15.765Z,1467371895.765 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:18:15.767Z,1467371895.767 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:18:23.760Z,1467371903.760 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T11:18:25.773Z,1467371905.773 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T11:20:25.784Z,1467372025.784 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T11:20:27.799Z,1467372027.799 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T11:21:16.779Z,1467372076.779 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:21:16.781Z,1467372076.781 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:22:27.329Z,1467372147.329 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T11:22:28.117Z,1467372148.117 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T11:22:30.140Z,1467372150.140 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T11:24:17.943Z,1467372257.943 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:24:17.945Z,1467372257.945 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:24:30.152Z,1467372270.152 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T11:24:32.162Z,1467372272.162 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T11:26:32.509Z,1467372392.509 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T11:26:32.847Z,1467372392.847 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-07-01T11:27:19.089Z,1467372439.089 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:27:19.091Z,1467372439.091 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:30:20.261Z,1467372620.261 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:30:20.263Z,1467372620.263 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:32:45.295Z,1467372765.295 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-01T11:33:21.779Z,1467372801.779 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:33:21.781Z,1467372801.781 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:36:22.710Z,1467372982.710 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:36:22.712Z,1467372982.712 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:36:32.763Z,1467372992.763 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T11:38:33.134Z,1467373113.134 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T11:38:35.144Z,1467373115.144 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-07-01T11:39:24.038Z,1467373164.038 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:39:24.040Z,1467373164.040 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-01T11:40:35.508Z,1467373235.508 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-07-01T11:40:37.518Z,1467373237.518 [Rowe_600LCM](IMPORTANT): LCM not connected