2016-06-11T01:30:07.094Z,1465608607.094 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg 2016-06-11T01:30:14.129Z,1465608614.129 [SBIT](IMPORTANT): git: 2015-11-13-11-g036008f 2016-06-11T01:30:14.130Z,1465608614.130 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2016-06-11T01:30:14.130Z,1465608614.130 [SBIT](IMPORTANT): Kernel Version:#639 PREEMPT Wed Mar 12 12:53:33 PDT 2014 2016-06-11T01:30:14.133Z,1465608614.133 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL. 2016-06-11T01:30:14.133Z,1465608614.133 [CBIT](CRITICAL): LAST REBOOT DUE TO WATCHDOG TIMER RESET. 2016-06-11T01:30:14.305Z,1465608614.305 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T01:30:15.558Z,1465608615.558 [CommandLine](FAULT): Scheduling is paused 2016-06-11T01:30:16.403Z,1465608616.403 [BuoyancyServo](FAULT): Buoyancy failed to initialize 2016-06-11T01:30:27.113Z,1465608627.113 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:30:41.124Z,1465608641.124 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:30:55.487Z,1465608655.487 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:31:09.509Z,1465608669.509 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:31:17.952Z,1465608677.952 [SBIT](IMPORTANT): Beginning Startup BIT 2016-06-11T01:31:17.955Z,1465608677.955 [CBIT](IMPORTANT): Beginning GF scan 2016-06-11T01:31:33.782Z,1465608693.782 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-11T01:31:33.920Z,1465608693.920 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T01:31:44.656Z,1465608704.656 [CBIT](IMPORTANT): No ground fault detected 2016-06-11T01:32:12.033Z,1465608732.033 [SBIT](IMPORTANT): SBIT PASSED 2016-06-11T01:32:12.426Z,1465608732.426 [MissionManager](IMPORTANT): Started mission Startup 2016-06-11T01:32:14.431Z,1465608734.431 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:32:14.433Z,1465608734.433 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:32:14.618Z,1465608734.618 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T01:32:16.630Z,1465608736.630 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T01:34:16.946Z,1465608856.946 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T01:34:18.323Z,1465608858.323 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:34:18.325Z,1465608858.325 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:34:18.505Z,1465608858.505 [MissionManager](IMPORTANT): Started mission Default 2016-06-11T01:34:18.964Z,1465608858.964 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T01:35:30.131Z,1465608930.131 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2016-06-11T01:36:18.962Z,1465608978.962 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:36:18.963Z,1465608978.963 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:36:19.183Z,1465608979.183 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T01:36:23.597Z,1465608983.597 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T01:36:46.623Z,1465609006.623 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:37:01.025Z,1465609021.025 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:37:15.429Z,1465609035.429 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:37:29.543Z,1465609049.543 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:37:43.961Z,1465609063.961 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:37:43.980Z,1465609063.980 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T01:38:19.973Z,1465609099.973 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:38:19.975Z,1465609099.975 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:38:23.900Z,1465609103.900 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T01:38:25.914Z,1465609105.914 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T01:40:25.712Z,1465609225.712 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:40:25.714Z,1465609225.714 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:40:25.934Z,1465609225.934 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T01:40:26.195Z,1465609226.195 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T01:40:31.093Z,1465609231.093 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T01:42:26.446Z,1465609346.446 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:42:26.449Z,1465609346.449 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:42:56.849Z,1465609376.849 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:43:11.241Z,1465609391.241 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:43:25.644Z,1465609405.644 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:43:42.135Z,1465609422.135 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:43:56.534Z,1465609436.534 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:43:56.582Z,1465609436.582 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T01:44:27.338Z,1465609467.338 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:44:27.340Z,1465609467.340 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:45:31.097Z,1465609531.097 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 11.155471 min 2016-06-11T01:46:31.245Z,1465609591.245 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:46:31.247Z,1465609591.247 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:48:31.822Z,1465609711.822 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:48:31.824Z,1465609711.824 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:49:09.415Z,1465609749.415 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:49:23.432Z,1465609763.432 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:49:37.494Z,1465609777.494 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:49:51.900Z,1465609791.900 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:50:06.296Z,1465609806.296 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:50:06.315Z,1465609806.315 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T01:50:26.146Z,1465609826.146 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T01:50:32.672Z,1465609832.672 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:50:32.675Z,1465609832.675 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:50:51.593Z,1465609851.593 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T01:52:26.186Z,1465609946.186 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T01:52:28.197Z,1465609948.197 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T01:52:33.806Z,1465609953.806 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:52:33.808Z,1465609953.808 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:54:28.564Z,1465610068.564 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T01:54:30.578Z,1465610070.578 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T01:54:34.892Z,1465610074.892 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:54:34.895Z,1465610074.895 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:55:19.051Z,1465610119.051 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:55:33.442Z,1465610133.442 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:55:47.841Z,1465610147.841 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:55:52.382Z,1465610152.382 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.509359 min 2016-06-11T01:56:04.830Z,1465610164.830 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:56:19.225Z,1465610179.225 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T01:56:19.245Z,1465610179.245 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T01:56:30.846Z,1465610190.846 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T01:56:33.256Z,1465610193.256 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T01:56:35.696Z,1465610195.696 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:56:35.698Z,1465610195.698 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:58:33.636Z,1465610313.636 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T01:58:35.646Z,1465610315.646 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T01:58:36.699Z,1465610316.699 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T01:58:36.701Z,1465610316.701 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T02:00:35.953Z,1465610435.953 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:00:36.166Z,1465610436.166 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T02:00:37.731Z,1465610437.731 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T02:00:37.733Z,1465610437.733 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T02:01:12.645Z,1465610472.645 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T02:01:33.154Z,1465610493.154 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-11T02:03:38.666Z,1465610618.666 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:03:38.669Z,1465610618.669 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:06:13.177Z,1465610773.177 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.858679 min 2016-06-11T02:06:39.676Z,1465610799.676 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:06:39.678Z,1465610799.678 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:09:40.931Z,1465610980.931 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:09:40.933Z,1465610980.933 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:10:36.559Z,1465611036.559 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:11:34.022Z,1465611094.022 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T02:12:36.594Z,1465611156.594 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:12:38.608Z,1465611158.608 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:12:41.852Z,1465611161.852 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:12:41.854Z,1465611161.854 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:14:38.652Z,1465611278.652 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:14:40.663Z,1465611280.663 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:15:43.077Z,1465611343.077 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:15:43.079Z,1465611343.079 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:16:34.304Z,1465611394.304 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 42.210116 min 2016-06-11T02:16:40.966Z,1465611400.966 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:16:42.976Z,1465611402.976 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:18:43.334Z,1465611523.334 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:18:44.269Z,1465611524.269 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:18:44.271Z,1465611524.271 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:18:45.345Z,1465611525.345 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:20:45.393Z,1465611645.393 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:20:45.450Z,1465611645.450 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T02:21:45.329Z,1465611705.329 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:21:45.331Z,1465611705.331 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:21:54.602Z,1465611714.602 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T02:21:54.657Z,1465611714.657 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T02:24:46.489Z,1465611886.489 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:24:46.492Z,1465611886.492 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:26:55.185Z,1465612015.185 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 52.556974 min 2016-06-11T02:27:47.635Z,1465612067.635 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:27:47.638Z,1465612067.638 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:30:45.642Z,1465612245.642 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:30:48.738Z,1465612248.738 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:30:48.740Z,1465612248.740 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:32:45.982Z,1465612365.982 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:32:47.992Z,1465612367.992 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:33:49.814Z,1465612429.814 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:33:49.816Z,1465612429.816 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:34:08.189Z,1465612448.189 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T02:34:48.039Z,1465612488.039 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:34:50.049Z,1465612490.049 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:36:50.369Z,1465612610.369 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:36:50.989Z,1465612610.989 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:36:50.991Z,1465612610.991 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:36:52.383Z,1465612612.383 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:37:16.270Z,1465612636.270 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.908887 min 2016-06-11T02:38:52.718Z,1465612732.718 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:38:54.728Z,1465612734.728 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:39:51.863Z,1465612791.863 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:39:51.865Z,1465612791.865 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:40:55.088Z,1465612855.088 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:40:55.261Z,1465612855.261 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T02:42:53.015Z,1465612973.015 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:42:53.016Z,1465612973.016 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:44:29.020Z,1465613069.020 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T02:45:54.058Z,1465613154.058 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:45:54.060Z,1465613154.060 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:47:36.985Z,1465613256.985 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 73.253760 min 2016-06-11T02:48:55.159Z,1465613335.159 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:48:55.161Z,1465613335.161 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:50:55.366Z,1465613455.366 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:51:56.326Z,1465613516.326 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:51:56.328Z,1465613516.328 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:52:55.644Z,1465613575.644 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:52:57.655Z,1465613577.655 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:54:50.696Z,1465613690.696 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T02:54:57.584Z,1465613697.584 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:54:57.586Z,1465613697.586 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:54:57.710Z,1465613697.710 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:54:59.721Z,1465613699.721 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:57:00.060Z,1465613820.060 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:57:02.071Z,1465613822.071 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T02:57:58.062Z,1465613878.062 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 83.604305 min 2016-06-11T02:57:58.200Z,1465613878.200 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:57:58.202Z,1465613878.202 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T02:59:02.406Z,1465613942.406 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T02:59:04.416Z,1465613944.416 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:00:59.304Z,1465614059.304 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:00:59.314Z,1465614059.314 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:01:04.720Z,1465614064.720 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:01:04.909Z,1465614064.909 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T03:04:00.462Z,1465614240.462 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:04:00.464Z,1465614240.464 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:05:10.842Z,1465614310.842 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T03:07:01.437Z,1465614421.437 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:07:01.439Z,1465614421.439 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:08:23.561Z,1465614503.561 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 94.030859 min 2016-06-11T03:10:02.577Z,1465614602.577 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:10:02.578Z,1465614602.578 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:11:05.301Z,1465614665.301 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:13:03.394Z,1465614783.394 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:13:03.396Z,1465614783.396 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:13:05.641Z,1465614785.641 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:13:07.664Z,1465614787.664 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:15:07.802Z,1465614907.802 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:15:09.813Z,1465614909.813 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:15:28.171Z,1465614928.171 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T03:15:28.247Z,1465614928.247 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T03:16:04.352Z,1465614964.352 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:16:04.354Z,1465614964.354 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:17:10.168Z,1465615030.168 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:17:12.178Z,1465615032.178 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:18:44.556Z,1465615124.556 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 104.380086 min 2016-06-11T03:19:05.427Z,1465615145.427 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:19:05.429Z,1465615145.429 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:19:12.546Z,1465615152.546 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:19:14.556Z,1465615154.556 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:21:14.955Z,1465615274.955 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:21:14.968Z,1465615274.968 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T03:22:06.593Z,1465615326.593 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:22:06.595Z,1465615326.595 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:25:07.613Z,1465615507.613 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:25:07.635Z,1465615507.635 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:27:40.971Z,1465615660.971 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T03:28:08.730Z,1465615688.730 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:28:08.736Z,1465615688.736 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:29:05.086Z,1465615745.086 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 114.722591 min 2016-06-11T03:31:09.852Z,1465615869.852 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:31:09.854Z,1465615869.854 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:31:15.169Z,1465615875.169 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:33:15.509Z,1465615995.509 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:33:17.527Z,1465615997.527 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:34:10.744Z,1465616050.744 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:34:10.746Z,1465616050.746 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:35:17.851Z,1465616117.851 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:35:19.861Z,1465616119.861 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:37:11.419Z,1465616231.419 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:37:11.424Z,1465616231.424 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:37:19.929Z,1465616239.929 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:37:21.946Z,1465616241.946 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:38:00.692Z,1465616280.692 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T03:39:22.309Z,1465616362.309 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:39:26.096Z,1465616366.096 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 125.074186 min 2016-06-11T03:39:26.323Z,1465616366.323 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:40:12.562Z,1465616412.562 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:40:12.564Z,1465616412.564 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:41:26.631Z,1465616486.631 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:41:26.850Z,1465616486.850 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T03:43:13.697Z,1465616593.697 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:43:13.699Z,1465616593.699 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:46:14.667Z,1465616774.667 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:46:14.669Z,1465616774.669 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:48:18.494Z,1465616898.494 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T03:49:15.877Z,1465616955.877 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:49:15.879Z,1465616955.879 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:49:46.676Z,1465616986.676 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 135.415706 min 2016-06-11T03:51:26.912Z,1465617086.912 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:52:16.896Z,1465617136.896 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:52:16.898Z,1465617136.898 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:53:27.267Z,1465617207.267 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:53:29.290Z,1465617209.290 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:55:17.796Z,1465617317.796 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:55:17.798Z,1465617317.798 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:55:29.681Z,1465617329.681 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:55:31.691Z,1465617331.691 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:57:31.731Z,1465617451.731 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:57:33.740Z,1465617453.740 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T03:58:18.929Z,1465617498.929 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:58:18.931Z,1465617498.931 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T03:58:37.300Z,1465617517.300 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T03:59:34.118Z,1465617574.118 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T03:59:36.134Z,1465617576.134 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:00:07.560Z,1465617607.560 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 145.762256 min 2016-06-11T04:01:20.138Z,1465617680.138 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:01:20.141Z,1465617680.141 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:01:36.170Z,1465617696.170 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:01:36.224Z,1465617696.224 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T04:04:21.011Z,1465617861.011 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:04:21.013Z,1465617861.013 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:07:21.975Z,1465618041.975 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:07:21.978Z,1465618041.978 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:08:56.204Z,1465618136.204 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T04:08:56.300Z,1465618136.300 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T04:10:23.152Z,1465618223.152 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:10:23.154Z,1465618223.154 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:10:28.425Z,1465618228.425 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 156.110938 min 2016-06-11T04:11:36.387Z,1465618296.387 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:13:24.003Z,1465618404.003 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:13:24.005Z,1465618404.005 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:13:36.698Z,1465618416.698 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:13:38.709Z,1465618418.709 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:15:39.065Z,1465618539.065 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:15:44.280Z,1465618544.280 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:16:25.129Z,1465618585.129 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:16:25.131Z,1465618585.131 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:17:44.310Z,1465618664.310 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:17:46.321Z,1465618666.321 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:19:26.011Z,1465618766.011 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:19:26.013Z,1465618766.013 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:19:46.652Z,1465618786.652 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:19:49.868Z,1465618789.868 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:20:46.460Z,1465618846.460 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 166.459945 min 2016-06-11T04:21:10.175Z,1465618870.175 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T04:21:50.196Z,1465618910.196 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:21:50.420Z,1465618910.420 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T04:22:27.144Z,1465618947.144 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:22:27.146Z,1465618947.146 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:25:28.226Z,1465619128.226 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:25:28.228Z,1465619128.228 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:28:29.196Z,1465619309.196 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:28:29.231Z,1465619309.231 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:31:02.708Z,1465619462.708 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 176.730680 min 2016-06-11T04:31:28.769Z,1465619488.769 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T04:31:29.996Z,1465619489.996 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:31:30.018Z,1465619490.018 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:31:50.418Z,1465619510.418 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:33:50.807Z,1465619630.807 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:33:52.819Z,1465619632.819 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:34:31.112Z,1465619671.112 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:34:31.114Z,1465619671.114 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:35:53.163Z,1465619753.163 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:35:55.184Z,1465619755.184 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:37:32.129Z,1465619852.129 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:37:32.130Z,1465619852.130 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:37:55.545Z,1465619875.545 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:37:57.554Z,1465619877.554 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:39:57.922Z,1465619997.922 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:39:59.932Z,1465619999.932 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:40:33.057Z,1465620033.057 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:40:33.059Z,1465620033.059 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:41:19.114Z,1465620079.114 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 187.002360 min 2016-06-11T04:41:49.123Z,1465620109.123 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T04:42:00.296Z,1465620120.296 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:42:00.386Z,1465620120.386 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T04:43:34.186Z,1465620214.186 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:43:34.188Z,1465620214.188 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:46:37.477Z,1465620397.477 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:46:37.479Z,1465620397.479 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:49:38.227Z,1465620578.227 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:49:38.229Z,1465620578.229 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:51:35.251Z,1465620695.251 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 197.272868 min 2016-06-11T04:52:00.890Z,1465620720.890 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:52:06.540Z,1465620726.540 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T04:52:38.741Z,1465620758.741 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:52:38.743Z,1465620758.743 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:54:00.932Z,1465620840.932 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:54:02.943Z,1465620842.943 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:55:39.567Z,1465620939.567 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:55:39.569Z,1465620939.569 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:56:03.335Z,1465620963.335 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:56:05.349Z,1465620965.349 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:58:05.705Z,1465621085.705 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T04:58:07.727Z,1465621087.727 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T04:58:40.691Z,1465621120.691 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T04:58:40.693Z,1465621120.693 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:00:07.934Z,1465621207.934 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:00:09.948Z,1465621209.948 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:01:41.500Z,1465621301.500 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:01:41.506Z,1465621301.506 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:01:54.700Z,1465621314.700 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 207.549674 min 2016-06-11T05:02:10.267Z,1465621330.267 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:02:10.428Z,1465621330.428 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T05:02:23.995Z,1465621343.995 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T05:02:24.029Z,1465621344.029 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T05:04:42.581Z,1465621482.581 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:04:42.599Z,1465621482.599 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:07:43.665Z,1465621663.665 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:07:43.667Z,1465621663.667 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:10:44.785Z,1465621844.785 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:10:44.786Z,1465621844.786 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:12:10.902Z,1465621930.902 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:12:15.597Z,1465621935.597 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 217.893229 min 2016-06-11T05:13:45.614Z,1465622025.614 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:13:45.616Z,1465622025.616 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:14:10.989Z,1465622050.989 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:14:15.804Z,1465622055.804 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:14:36.846Z,1465622076.846 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T05:16:16.171Z,1465622176.171 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:16:18.181Z,1465622178.181 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:16:46.807Z,1465622206.807 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:16:46.809Z,1465622206.809 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:18:18.526Z,1465622298.526 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:18:20.539Z,1465622300.539 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:19:47.721Z,1465622387.721 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:19:47.743Z,1465622387.743 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:20:20.603Z,1465622420.603 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:20:22.612Z,1465622422.612 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:22:22.956Z,1465622542.956 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:22:23.133Z,1465622543.133 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T05:22:36.321Z,1465622556.321 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 228.243587 min 2016-06-11T05:22:48.788Z,1465622568.788 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:22:48.791Z,1465622568.791 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:24:54.131Z,1465622694.131 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T05:25:49.860Z,1465622749.860 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:25:49.862Z,1465622749.862 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:28:50.741Z,1465622930.741 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:28:50.743Z,1465622930.743 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:31:51.869Z,1465623111.869 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:31:51.871Z,1465623111.871 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:32:23.579Z,1465623143.579 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:32:54.058Z,1465623174.058 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 238.585889 min 2016-06-11T05:34:23.954Z,1465623263.954 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:34:25.964Z,1465623265.964 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:34:52.738Z,1465623292.738 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:34:52.740Z,1465623292.740 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:35:13.169Z,1465623313.169 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T05:36:26.284Z,1465623386.284 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:36:28.294Z,1465623388.294 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:37:53.896Z,1465623473.896 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:37:53.898Z,1465623473.898 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:38:28.578Z,1465623508.578 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:38:30.587Z,1465623510.587 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:40:30.971Z,1465623630.971 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:40:32.985Z,1465623632.985 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:40:54.975Z,1465623654.975 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:40:54.977Z,1465623654.977 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:42:33.319Z,1465623753.319 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:42:33.338Z,1465623753.338 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T05:43:18.536Z,1465623798.536 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 248.946566 min 2016-06-11T05:43:55.793Z,1465623835.793 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:43:55.796Z,1465623835.796 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:45:30.741Z,1465623930.741 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T05:46:56.853Z,1465624016.853 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:46:56.855Z,1465624016.855 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:49:58.023Z,1465624198.023 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:49:58.025Z,1465624198.025 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:52:33.530Z,1465624353.530 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:52:59.024Z,1465624379.024 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:52:59.026Z,1465624379.026 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:53:39.439Z,1465624419.439 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 259.296029 min 2016-06-11T05:54:33.614Z,1465624473.614 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:54:35.624Z,1465624475.624 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:55:48.093Z,1465624548.093 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T05:55:48.162Z,1465624548.162 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T05:56:00.137Z,1465624560.137 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:56:00.139Z,1465624560.139 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:56:35.638Z,1465624595.638 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:56:40.056Z,1465624600.056 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:58:40.083Z,1465624720.083 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T05:58:44.898Z,1465624724.898 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T05:59:01.250Z,1465624741.250 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T05:59:01.252Z,1465624741.252 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:00:44.905Z,1465624844.905 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:00:46.914Z,1465624846.914 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:02:02.136Z,1465624922.136 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:02:02.138Z,1465624922.138 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:02:46.943Z,1465624966.943 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:02:47.305Z,1465624967.305 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T06:04:00.579Z,1465625040.579 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 269.647900 min 2016-06-11T06:05:03.240Z,1465625103.240 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:05:03.242Z,1465625103.242 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:08:01.390Z,1465625281.390 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T06:08:04.216Z,1465625284.216 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:08:04.218Z,1465625284.218 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:11:05.180Z,1465625465.180 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:11:05.182Z,1465625465.182 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:12:47.183Z,1465625567.183 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:14:06.328Z,1465625646.328 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:14:06.351Z,1465625646.351 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:14:21.183Z,1465625661.183 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 279.990332 min 2016-06-11T06:14:47.503Z,1465625687.503 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:14:49.513Z,1465625689.513 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:16:49.869Z,1465625809.869 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:16:51.880Z,1465625811.880 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:17:07.193Z,1465625827.193 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:17:07.196Z,1465625827.196 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:17:07.223Z,1465625827.223 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-06-11T06:17:07.224Z,1465625827.224 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-06-11T06:18:23.892Z,1465625903.892 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T06:18:51.939Z,1465625931.939 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:18:53.948Z,1465625933.948 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:20:54.252Z,1465626054.252 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:20:56.266Z,1465626056.266 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:22:56.666Z,1465626176.666 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:22:56.997Z,1465626176.997 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T06:24:42.407Z,1465626282.407 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 290.343717 min 2016-06-11T06:28:42.728Z,1465626522.728 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T06:32:56.887Z,1465626776.887 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:34:56.909Z,1465626896.909 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:34:58.929Z,1465626898.929 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:35:02.907Z,1465626902.907 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 300.686491 min 2016-06-11T06:35:08.231Z,1465626908.231 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:35:08.233Z,1465626908.233 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:36:58.987Z,1465627018.987 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:37:03.401Z,1465627023.401 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:38:09.058Z,1465627089.058 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:38:09.065Z,1465627089.065 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:39:03.753Z,1465627143.753 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:39:03.862Z,1465627143.862 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T06:39:05.767Z,1465627145.767 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:41:05.823Z,1465627265.823 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:41:07.833Z,1465627267.833 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:41:10.106Z,1465627270.106 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:41:10.110Z,1465627270.110 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:43:08.144Z,1465627388.144 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:43:08.539Z,1465627388.539 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T06:44:10.997Z,1465627450.997 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:44:10.000Z,1465627451.000 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:45:23.922Z,1465627523.922 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 311.036784 min 2016-06-11T06:47:12.074Z,1465627632.074 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:47:12.076Z,1465627632.076 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:49:24.716Z,1465627764.716 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T06:49:24.804Z,1465627764.804 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T06:50:13.139Z,1465627813.139 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:50:13.141Z,1465627813.141 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:53:08.361Z,1465627988.361 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:53:14.193Z,1465627994.193 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:53:14.196Z,1465627994.196 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:55:08.557Z,1465628108.557 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:55:10.972Z,1465628110.972 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:55:44.570Z,1465628144.570 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 321.380566 min 2016-06-11T06:56:15.024Z,1465628175.024 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:56:15.026Z,1465628175.026 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:57:11.301Z,1465628231.301 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:57:13.317Z,1465628233.317 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:59:13.685Z,1465628353.685 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T06:59:15.699Z,1465628355.699 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T06:59:15.903Z,1465628355.903 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T06:59:15.905Z,1465628355.905 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:01:16.062Z,1465628476.062 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:01:18.073Z,1465628478.073 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:01:38.202Z,1465628498.202 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T07:02:16.794Z,1465628536.794 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:02:16.797Z,1465628536.797 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:03:18.076Z,1465628598.076 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:03:18.186Z,1465628598.186 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T07:05:17.899Z,1465628717.899 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:05:17.901Z,1465628717.901 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:06:05.504Z,1465628765.504 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 331.730632 min 2016-06-11T07:08:19.043Z,1465628899.043 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:08:19.045Z,1465628899.045 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:11:20.739Z,1465629080.739 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:11:20.741Z,1465629080.741 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:11:56.091Z,1465629116.091 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T07:13:18.353Z,1465629198.353 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:14:21.582Z,1465629261.582 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:14:21.585Z,1465629261.585 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:15:18.689Z,1465629318.689 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:15:20.699Z,1465629320.699 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:16:26.255Z,1465629386.255 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 342.074447 min 2016-06-11T07:17:21.102Z,1465629441.102 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:17:22.718Z,1465629442.718 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:17:22.720Z,1465629442.720 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:17:23.113Z,1465629443.113 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:19:23.475Z,1465629563.475 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:19:26.688Z,1465629566.688 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:20:26.759Z,1465629626.759 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:20:26.761Z,1465629626.761 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:21:27.076Z,1465629687.076 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:21:31.899Z,1465629691.899 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:22:14.506Z,1465629734.506 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T07:23:27.496Z,1465629807.496 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:23:27.498Z,1465629807.498 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:23:31.937Z,1465629811.937 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:23:31.946Z,1465629811.946 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T07:26:28.697Z,1465629988.697 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:26:28.699Z,1465629988.699 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:26:47.586Z,1465630007.586 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 352.430111 min 2016-06-11T07:29:29.519Z,1465630169.519 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:29:29.521Z,1465630169.521 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:31:44.916Z,1465630304.916 [CBIT](IMPORTANT): Beginning GF scan 2016-06-11T07:32:30.294Z,1465630350.294 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:32:30.296Z,1465630350.296 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:32:34.257Z,1465630354.257 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T07:33:32.179Z,1465630412.179 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:35:31.445Z,1465630531.445 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:35:31.447Z,1465630531.447 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:35:32.535Z,1465630532.535 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:35:34.545Z,1465630534.545 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:37:08.540Z,1465630628.540 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 362.778776 min 2016-06-11T07:37:34.585Z,1465630654.585 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:37:36.594Z,1465630656.594 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:38:32.505Z,1465630712.505 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:38:32.507Z,1465630712.507 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:39:36.994Z,1465630776.994 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:39:39.004Z,1465630779.004 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:41:33.406Z,1465630893.406 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:41:33.408Z,1465630893.408 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:41:39.019Z,1465630899.019 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:41:41.030Z,1465630901.030 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:42:51.936Z,1465630971.936 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T07:42:52.008Z,1465630972.008 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T07:43:41.360Z,1465631021.360 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:43:41.372Z,1465631021.372 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T07:44:34.596Z,1465631074.596 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:44:34.598Z,1465631074.598 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:47:29.588Z,1465631249.588 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 373.131966 min 2016-06-11T07:47:35.644Z,1465631255.644 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:47:35.646Z,1465631255.646 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:50:36.856Z,1465631436.856 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:50:36.858Z,1465631436.858 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:53:37.862Z,1465631617.862 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:53:37.864Z,1465631617.864 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:53:41.579Z,1465631621.579 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:55:06.094Z,1465631706.094 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T07:55:41.926Z,1465631741.926 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:55:43.936Z,1465631743.936 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:56:38.952Z,1465631798.952 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:56:38.954Z,1465631798.954 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:57:43.999Z,1465631863.999 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:57:46.009Z,1465631866.009 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T07:57:50.657Z,1465631870.657 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 383.476335 min 2016-06-11T07:59:40.108Z,1465631980.108 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:59:40.111Z,1465631980.111 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T07:59:46.389Z,1465631986.389 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T07:59:50.807Z,1465631990.807 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:01:51.151Z,1465632111.151 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:01:53.161Z,1465632113.161 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:02:40.936Z,1465632160.936 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:02:40.939Z,1465632160.939 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:03:53.564Z,1465632233.564 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:03:53.762Z,1465632233.762 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T08:05:23.531Z,1465632323.531 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T08:05:41.957Z,1465632341.957 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:05:41.959Z,1465632341.959 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:08:09.505Z,1465632489.505 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 393.843327 min 2016-06-11T08:08:42.894Z,1465632522.894 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:08:42.921Z,1465632522.921 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:11:43.681Z,1465632703.681 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:11:43.683Z,1465632703.683 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:13:54.195Z,1465632834.195 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:14:44.939Z,1465632884.939 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:14:44.941Z,1465632884.941 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:15:42.131Z,1465632942.131 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T08:15:54.222Z,1465632954.222 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:15:56.231Z,1465632956.231 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:17:45.972Z,1465633065.972 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:17:45.974Z,1465633065.974 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:17:56.583Z,1465633076.583 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:17:58.593Z,1465633078.593 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:18:30.442Z,1465633110.442 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 404.144303 min 2016-06-11T08:19:58.925Z,1465633198.925 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:20:00.935Z,1465633200.935 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:20:46.820Z,1465633246.820 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:20:46.843Z,1465633246.843 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:22:01.339Z,1465633321.339 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:22:03.356Z,1465633323.356 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:23:47.673Z,1465633427.673 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:23:47.676Z,1465633427.676 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:24:03.757Z,1465633443.757 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:24:03.885Z,1465633443.885 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T08:26:00.085Z,1465633560.085 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T08:26:51.352Z,1465633611.352 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:26:51.354Z,1465633611.354 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:28:51.494Z,1465633731.494 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 414.496387 min 2016-06-11T08:29:52.132Z,1465633792.132 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:29:52.134Z,1465633792.134 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:32:53.106Z,1465633973.106 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:32:53.109Z,1465633973.109 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:34:06.763Z,1465634046.763 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:35:54.165Z,1465634154.165 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:35:54.167Z,1465634154.167 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:36:06.781Z,1465634166.781 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:36:08.792Z,1465634168.792 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:36:20.167Z,1465634180.167 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T08:36:20.263Z,1465634180.263 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T08:38:09.128Z,1465634289.128 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:38:15.564Z,1465634295.564 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:38:54.974Z,1465634334.974 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:38:54.976Z,1465634334.976 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:39:09.350Z,1465634349.350 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 424.840723 min 2016-06-11T08:40:15.901Z,1465634415.901 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:40:17.909Z,1465634417.909 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:41:56.075Z,1465634516.075 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:41:56.077Z,1465634516.077 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:42:18.310Z,1465634538.310 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:42:20.319Z,1465634540.319 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:44:20.719Z,1465634660.719 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:44:23.236Z,1465634663.236 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T08:44:57.045Z,1465634697.045 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:44:57.048Z,1465634697.048 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:47:58.156Z,1465634878.156 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:47:58.158Z,1465634878.158 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:48:34.140Z,1465634914.140 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T08:49:28.606Z,1465634968.606 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 435.114681 min 2016-06-11T08:50:59.162Z,1465635059.162 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:50:59.164Z,1465635059.164 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:54:00.319Z,1465635240.319 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:54:00.323Z,1465635240.323 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:54:20.908Z,1465635260.908 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:56:21.220Z,1465635381.220 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:56:23.230Z,1465635383.230 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:57:01.317Z,1465635421.317 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:57:01.319Z,1465635421.319 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T08:58:23.529Z,1465635503.529 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T08:58:25.540Z,1465635505.540 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T08:58:52.025Z,1465635532.025 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T08:59:46.451Z,1465635586.451 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 445.459831 min 2016-06-11T09:00:02.204Z,1465635602.204 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:00:02.206Z,1465635602.206 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:00:25.888Z,1465635625.888 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:00:27.902Z,1465635627.902 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:02:28.242Z,1465635748.242 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:02:30.259Z,1465635750.259 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:03:03.052Z,1465635783.052 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:03:03.054Z,1465635783.054 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:04:30.266Z,1465635870.266 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:04:30.380Z,1465635870.380 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T09:06:05.556Z,1465635965.556 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:06:05.558Z,1465635965.558 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:09:06.087Z,1465636146.087 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:09:06.089Z,1465636146.089 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:09:10.930Z,1465636150.930 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T09:10:02.954Z,1465636202.954 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 455.734115 min 2016-06-11T09:12:06.621Z,1465636326.621 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:12:06.623Z,1465636326.623 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:14:30.484Z,1465636470.484 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:15:07.690Z,1465636507.690 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:15:07.692Z,1465636507.692 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:16:30.796Z,1465636590.796 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:16:32.806Z,1465636592.806 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:18:08.819Z,1465636688.819 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:18:08.820Z,1465636688.820 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:18:33.121Z,1465636713.121 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:18:35.131Z,1465636715.131 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:19:29.393Z,1465636769.393 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T09:20:22.322Z,1465636822.322 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 466.008822 min 2016-06-11T09:20:35.207Z,1465636835.207 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:20:37.217Z,1465636837.217 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:21:09.616Z,1465636869.616 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:21:09.991Z,1465636869.991 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:22:37.527Z,1465636957.527 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:22:39.539Z,1465636959.539 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:24:10.554Z,1465637050.554 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:24:10.952Z,1465637050.952 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:24:39.906Z,1465637079.906 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:24:39.945Z,1465637079.945 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T09:27:11.437Z,1465637231.437 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:27:11.806Z,1465637231.806 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:29:47.748Z,1465637387.748 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T09:29:47.816Z,1465637387.816 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T09:30:12.579Z,1465637412.579 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:30:12.976Z,1465637412.976 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:30:43.473Z,1465637443.473 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 476.361393 min 2016-06-11T09:33:13.763Z,1465637593.763 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:33:14.200Z,1465637594.200 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:34:40.581Z,1465637680.581 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:36:14.764Z,1465637774.764 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:36:15.151Z,1465637775.151 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:36:40.940Z,1465637800.940 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:36:42.953Z,1465637802.953 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:38:43.301Z,1465637923.301 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:38:45.311Z,1465637925.311 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:39:15.593Z,1465637955.593 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:39:16.379Z,1465637956.379 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:40:45.343Z,1465638045.343 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:40:47.356Z,1465638047.356 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:41:04.599Z,1465638064.599 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 486.715137 min 2016-06-11T09:42:01.033Z,1465638121.033 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T09:42:16.428Z,1465638136.428 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:42:17.230Z,1465638137.230 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:42:47.709Z,1465638167.709 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:42:49.719Z,1465638169.719 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:44:50.046Z,1465638290.046 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:44:50.440Z,1465638290.440 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T09:45:17.313Z,1465638317.313 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:45:18.100Z,1465638318.100 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:48:18.398Z,1465638498.398 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:48:19.281Z,1465638499.281 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:51:19.499Z,1465638679.499 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:51:20.289Z,1465638680.289 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:51:25.580Z,1465638685.580 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 497.063346 min 2016-06-11T09:52:20.809Z,1465638740.809 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T09:54:20.315Z,1465638860.315 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:54:21.106Z,1465638861.106 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:54:50.284Z,1465638890.284 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:56:50.639Z,1465639010.639 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:56:52.657Z,1465639012.657 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T09:57:21.400Z,1465639041.400 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:57:22.222Z,1465639042.222 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T09:58:52.966Z,1465639132.966 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T09:58:54.975Z,1465639134.975 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:00:22.621Z,1465639222.621 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:00:23.030Z,1465639223.030 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:00:55.307Z,1465639255.307 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:00:57.325Z,1465639257.325 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:01:46.857Z,1465639306.857 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 507.418197 min 2016-06-11T10:02:40.886Z,1465639360.886 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T10:02:57.621Z,1465639377.621 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:02:59.634Z,1465639379.634 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:03:23.485Z,1465639403.485 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:03:23.892Z,1465639403.892 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:04:59.670Z,1465639499.670 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:04:59.803Z,1465639499.803 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T10:06:24.338Z,1465639584.338 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:06:24.711Z,1465639584.711 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:09:25.295Z,1465639765.295 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:09:25.699Z,1465639765.699 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:12:07.926Z,1465639927.926 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 517.769694 min 2016-06-11T10:12:26.412Z,1465639946.412 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:12:26.803Z,1465639946.803 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:12:58.753Z,1465639978.753 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T10:15:00.267Z,1465640100.267 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:15:27.370Z,1465640127.370 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:15:27.737Z,1465640127.737 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:17:00.291Z,1465640220.291 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:17:02.701Z,1465640222.701 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:18:29.005Z,1465640309.005 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:18:29.007Z,1465640309.007 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:19:03.080Z,1465640343.080 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:19:05.095Z,1465640345.095 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:21:05.395Z,1465640465.395 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:21:07.409Z,1465640467.409 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:21:29.664Z,1465640489.664 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:21:29.666Z,1465640489.666 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:22:29.685Z,1465640549.685 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 528.131576 min 2016-06-11T10:23:07.772Z,1465640587.772 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:23:09.786Z,1465640589.786 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:23:16.919Z,1465640596.919 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T10:23:16.981Z,1465640596.981 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T10:24:30.503Z,1465640670.503 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:24:30.505Z,1465640670.505 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:25:10.155Z,1465640710.155 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:25:10.468Z,1465640710.468 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T10:27:31.570Z,1465640851.570 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:27:31.572Z,1465640851.572 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:30:35.515Z,1465641035.515 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:30:35.517Z,1465641035.517 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:32:50.588Z,1465641170.588 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 538.480697 min 2016-06-11T10:33:36.644Z,1465641216.644 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:33:36.646Z,1465641216.646 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:35:10.768Z,1465641310.768 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:35:32.924Z,1465641332.924 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T10:36:37.549Z,1465641397.549 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:36:37.551Z,1465641397.551 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:37:11.092Z,1465641431.092 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:37:13.102Z,1465641433.102 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:39:13.454Z,1465641553.454 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:39:15.468Z,1465641555.468 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:39:38.398Z,1465641578.398 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:39:38.400Z,1465641578.400 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:41:15.503Z,1465641675.503 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:41:17.513Z,1465641677.513 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:42:39.296Z,1465641759.296 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:42:39.298Z,1465641759.298 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:43:08.895Z,1465641788.895 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 548.833073 min 2016-06-11T10:43:17.897Z,1465641797.897 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:43:19.906Z,1465641799.906 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:45:20.290Z,1465641920.290 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:45:20.622Z,1465641920.622 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T10:45:40.210Z,1465641940.210 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:45:40.213Z,1465641940.213 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:45:53.381Z,1465641953.381 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T10:48:41.262Z,1465642121.262 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:48:41.264Z,1465642121.264 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:51:42.408Z,1465642302.408 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:51:42.414Z,1465642302.414 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:53:32.678Z,1465642412.678 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 559.181445 min 2016-06-11T10:54:43.289Z,1465642483.289 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:54:43.291Z,1465642483.291 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:55:20.893Z,1465642520.893 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:56:14.197Z,1465642574.197 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T10:57:21.260Z,1465642641.260 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:57:23.279Z,1465642643.279 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T10:57:44.221Z,1465642664.221 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:57:44.223Z,1465642664.223 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T10:59:23.638Z,1465642763.638 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T10:59:25.648Z,1465642765.648 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:00:45.219Z,1465642845.219 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:00:45.221Z,1465642845.221 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:01:25.951Z,1465642885.951 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:01:27.966Z,1465642887.966 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:03:28.289Z,1465643008.289 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:03:30.299Z,1465643010.299 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:03:46.117Z,1465643026.117 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:03:46.119Z,1465643026.119 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:03:54.231Z,1465643034.231 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 569.540495 min 2016-06-11T11:05:30.627Z,1465643130.627 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:05:30.923Z,1465643130.923 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T11:06:34.177Z,1465643194.177 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T11:06:47.001Z,1465643207.001 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:06:47.004Z,1465643207.004 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:09:47.864Z,1465643387.864 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:09:47.866Z,1465643387.866 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:12:49.018Z,1465643569.018 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:12:49.020Z,1465643569.020 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:14:15.094Z,1465643655.094 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 579.890299 min 2016-06-11T11:15:30.933Z,1465643730.933 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:15:50.075Z,1465643750.075 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:15:50.077Z,1465643750.077 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:16:52.965Z,1465643812.965 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T11:16:53.038Z,1465643813.038 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T11:17:31.276Z,1465643851.276 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:17:33.286Z,1465643853.286 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:18:51.260Z,1465643931.260 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:18:51.261Z,1465643931.261 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:19:33.614Z,1465643973.614 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:19:35.628Z,1465643975.628 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:21:35.980Z,1465644095.980 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:21:37.989Z,1465644097.989 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:21:52.294Z,1465644112.294 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:21:52.296Z,1465644112.296 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:23:38.349Z,1465644218.349 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:23:40.359Z,1465644220.359 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:24:33.144Z,1465644273.144 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 590.237044 min 2016-06-11T11:24:53.228Z,1465644293.228 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:24:53.230Z,1465644293.230 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:25:40.711Z,1465644340.711 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:25:40.992Z,1465644340.992 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T11:27:54.376Z,1465644474.376 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:27:54.379Z,1465644474.379 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:29:06.847Z,1465644546.847 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T11:30:55.485Z,1465644655.485 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:30:55.487Z,1465644655.487 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:33:56.622Z,1465644836.622 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:33:56.638Z,1465644836.638 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:33:56.650Z,1465644836.650 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-06-11T11:33:56.651Z,1465644836.651 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-06-11T11:34:52.230Z,1465644892.230 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 600.508203 min 2016-06-11T11:35:40.904Z,1465644940.904 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:37:41.240Z,1465645061.240 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:37:43.250Z,1465645063.250 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:39:26.123Z,1465645166.123 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T11:39:43.634Z,1465645183.634 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:39:45.648Z,1465645185.648 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:41:46.048Z,1465645306.048 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:41:48.061Z,1465645308.061 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:43:48.424Z,1465645428.424 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:43:50.435Z,1465645430.435 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:45:13.741Z,1465645513.741 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 610.865625 min 2016-06-11T11:45:50.791Z,1465645550.791 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:45:51.018Z,1465645551.018 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T11:49:46.044Z,1465645786.044 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T11:51:57.225Z,1465645917.225 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:51:57.227Z,1465645917.227 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:54:58.383Z,1465646098.383 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:54:58.385Z,1465646098.385 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:55:34.824Z,1465646134.824 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 621.218164 min 2016-06-11T11:55:51.069Z,1465646151.069 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:57:51.397Z,1465646271.397 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:57:53.407Z,1465646273.407 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T11:57:59.196Z,1465646279.196 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:57:59.198Z,1465646279.198 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T11:59:53.758Z,1465646393.758 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T11:59:55.768Z,1465646395.768 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:00:03.914Z,1465646403.914 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T12:01:00.359Z,1465646460.359 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:01:00.361Z,1465646460.361 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:01:56.120Z,1465646516.120 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:01:58.130Z,1465646518.130 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:03:58.465Z,1465646638.465 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:04:00.475Z,1465646640.475 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:04:01.169Z,1465646641.169 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:04:01.171Z,1465646641.171 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:05:56.173Z,1465646756.173 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 631.573568 min 2016-06-11T12:06:00.815Z,1465646760.815 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:06:01.049Z,1465646761.049 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T12:07:01.967Z,1465646821.967 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:07:01.969Z,1465646821.969 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:10:03.044Z,1465647003.044 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:10:03.046Z,1465647003.046 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:10:21.816Z,1465647021.816 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T12:10:21.883Z,1465647021.883 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T12:13:04.224Z,1465647184.224 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:13:04.226Z,1465647184.226 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:16:01.421Z,1465647361.421 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:16:05.484Z,1465647365.484 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:16:05.486Z,1465647365.486 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:16:17.084Z,1465647377.084 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 641.922591 min 2016-06-11T12:18:01.440Z,1465647481.440 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:18:03.451Z,1465647483.451 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:19:06.494Z,1465647546.494 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:19:06.496Z,1465647546.496 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:20:03.613Z,1465647603.613 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:20:05.624Z,1465647605.624 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:22:05.939Z,1465647725.939 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:22:07.683Z,1465647727.683 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:22:07.686Z,1465647727.686 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:22:07.949Z,1465647727.949 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:22:37.699Z,1465647757.699 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T12:24:07.969Z,1465647847.969 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:24:09.987Z,1465647849.987 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:25:08.615Z,1465647908.615 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:25:08.622Z,1465647908.622 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:26:09.994Z,1465647969.994 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:26:10.347Z,1465647970.347 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T12:26:35.129Z,1465647995.129 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 652.270508 min 2016-06-11T12:27:26.813Z,1465648046.813 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-11T12:27:40.936Z,1465648060.936 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:27:55.346Z,1465648075.346 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:28:09.395Z,1465648089.395 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:28:09.408Z,1465648089.408 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:28:09.415Z,1465648089.415 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T12:28:23.724Z,1465648103.724 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:28:23.776Z,1465648103.776 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T12:30:10.436Z,1465648210.436 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:30:10.438Z,1465648210.438 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:32:11.466Z,1465648331.466 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:32:11.468Z,1465648331.468 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:32:55.985Z,1465648375.985 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T12:33:36.796Z,1465648416.796 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:33:54.014Z,1465648434.014 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:34:08.104Z,1465648448.104 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:34:12.537Z,1465648452.537 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:34:12.539Z,1465648452.539 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:34:22.522Z,1465648462.522 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:34:36.522Z,1465648476.522 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:34:36.543Z,1465648476.543 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T12:36:10.652Z,1465648570.652 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:36:13.564Z,1465648573.564 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:36:13.566Z,1465648573.566 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:36:54.472Z,1465648614.472 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 662.543750 min 2016-06-11T12:38:10.667Z,1465648690.667 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:38:12.681Z,1465648692.681 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:38:14.787Z,1465648694.787 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:38:14.806Z,1465648694.806 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:39:49.629Z,1465648789.629 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:40:06.208Z,1465648806.208 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:40:12.728Z,1465648812.728 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:40:14.738Z,1465648814.738 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:40:15.833Z,1465648815.833 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:40:15.835Z,1465648815.835 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:40:20.630Z,1465648820.630 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:40:35.013Z,1465648835.013 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:40:49.030Z,1465648849.030 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:40:49.051Z,1465648849.051 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T12:42:15.046Z,1465648935.046 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:42:16.648Z,1465648936.648 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:42:16.650Z,1465648936.650 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:42:17.060Z,1465648937.060 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:43:17.886Z,1465648997.886 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T12:44:17.388Z,1465649057.388 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:44:17.745Z,1465649057.745 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:44:17.748Z,1465649057.748 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:44:19.397Z,1465649059.397 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:46:01.839Z,1465649161.839 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:46:15.996Z,1465649175.996 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:46:18.847Z,1465649178.847 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:46:18.848Z,1465649178.848 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:46:19.697Z,1465649179.697 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:46:20.050Z,1465649180.050 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T12:46:30.387Z,1465649190.387 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:46:44.780Z,1465649204.780 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:46:59.188Z,1465649219.188 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:46:59.257Z,1465649219.257 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T12:47:15.670Z,1465649235.670 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 672.898503 min 2016-06-11T12:48:20.035Z,1465649300.035 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:48:20.037Z,1465649300.037 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:50:21.060Z,1465649421.060 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:50:21.062Z,1465649421.062 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:52:12.016Z,1465649532.016 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:52:21.882Z,1465649541.882 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:52:21.884Z,1465649541.884 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:52:31.627Z,1465649551.627 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:52:48.553Z,1465649568.553 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:53:02.968Z,1465649582.968 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:53:17.373Z,1465649597.373 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:53:17.453Z,1465649597.453 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T12:53:36.659Z,1465649616.659 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T12:54:23.082Z,1465649663.082 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:54:23.084Z,1465649663.084 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:56:20.311Z,1465649780.311 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:56:24.071Z,1465649784.071 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:56:24.073Z,1465649784.073 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:57:36.711Z,1465649856.711 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 683.250000 min 2016-06-11T12:58:20.699Z,1465649900.699 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T12:58:22.710Z,1465649902.710 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T12:58:25.188Z,1465649905.188 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:58:25.190Z,1465649905.190 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T12:58:30.377Z,1465649910.377 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:58:47.324Z,1465649927.324 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:59:01.343Z,1465649941.343 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:59:15.718Z,1465649955.718 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:59:30.122Z,1465649970.122 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T12:59:30.165Z,1465649970.165 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T13:00:23.088Z,1465650023.088 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:00:25.111Z,1465650025.111 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:00:26.319Z,1465650026.319 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:00:26.322Z,1465650026.322 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:02:25.503Z,1465650145.503 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:02:27.358Z,1465650147.358 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:02:27.386Z,1465650147.386 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:02:27.516Z,1465650147.516 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:03:57.565Z,1465650237.565 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T13:03:57.657Z,1465650237.657 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T13:04:27.812Z,1465650267.812 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:04:28.365Z,1465650268.365 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:04:28.367Z,1465650268.367 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:04:29.826Z,1465650269.826 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:04:43.165Z,1465650283.165 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:04:57.207Z,1465650297.207 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:05:11.249Z,1465650311.249 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:05:25.647Z,1465650325.647 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:05:40.049Z,1465650340.049 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:05:40.068Z,1465650340.068 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T13:06:29.401Z,1465650389.401 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:06:29.409Z,1465650389.409 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:06:30.202Z,1465650390.202 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:06:30.571Z,1465650390.571 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T13:07:57.557Z,1465650477.557 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 693.596615 min 2016-06-11T13:08:30.421Z,1465650510.421 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:08:30.423Z,1465650510.423 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:10:31.433Z,1465650631.433 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:10:31.436Z,1465650631.436 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:10:53.035Z,1465650653.035 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:11:09.965Z,1465650669.965 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:11:24.359Z,1465650684.359 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:11:38.733Z,1465650698.733 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:11:53.133Z,1465650713.133 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:11:53.153Z,1465650713.153 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T13:12:32.479Z,1465650752.479 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:12:32.481Z,1465650752.481 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:14:33.583Z,1465650873.583 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:14:33.585Z,1465650873.585 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:16:12.076Z,1465650972.076 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T13:16:30.961Z,1465650990.961 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:16:34.570Z,1465650994.570 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:16:34.572Z,1465650994.572 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:17:06.141Z,1465651026.141 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:17:22.597Z,1465651042.597 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:17:36.721Z,1465651056.721 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:17:51.125Z,1465651071.125 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:18:05.542Z,1465651085.542 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:18:05.589Z,1465651085.589 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T13:18:19.559Z,1465651099.559 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 704.010547 min 2016-06-11T13:18:31.352Z,1465651111.352 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:18:33.366Z,1465651113.366 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:18:35.727Z,1465651115.727 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:18:35.729Z,1465651115.729 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:20:33.762Z,1465651233.762 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:20:35.772Z,1465651235.772 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:20:36.822Z,1465651236.822 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:20:36.823Z,1465651236.823 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:22:36.112Z,1465651356.112 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:22:37.841Z,1465651357.841 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:22:37.843Z,1465651357.843 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:22:38.122Z,1465651358.122 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:23:18.602Z,1465651398.602 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:23:38.364Z,1465651418.364 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:23:52.421Z,1465651432.421 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:24:06.805Z,1465651446.805 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:24:21.208Z,1465651461.208 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:24:21.283Z,1465651461.283 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T13:24:38.513Z,1465651478.513 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:24:38.912Z,1465651478.912 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:24:38.914Z,1465651478.914 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:24:40.523Z,1465651480.523 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:26:31.829Z,1465651591.829 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T13:26:40.009Z,1465651600.009 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:26:40.011Z,1465651600.011 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:26:40.866Z,1465651600.866 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:26:41.281Z,1465651601.281 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T13:28:38.961Z,1465651718.961 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 714.287695 min 2016-06-11T13:28:41.045Z,1465651721.045 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:28:41.047Z,1465651721.047 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:29:34.194Z,1465651774.194 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:29:51.131Z,1465651791.131 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:30:05.554Z,1465651805.554 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:30:19.959Z,1465651819.959 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:30:34.352Z,1465651834.352 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:30:34.372Z,1465651834.372 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T13:30:42.013Z,1465651842.013 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:30:42.015Z,1465651842.015 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:32:14.496Z,1465651934.496 [CBIT](IMPORTANT): Beginning GF scan 2016-06-11T13:32:42.922Z,1465651962.922 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:32:42.932Z,1465651962.932 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:34:43.746Z,1465652083.746 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:34:43.748Z,1465652083.748 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:35:47.428Z,1465652147.428 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:36:01.568Z,1465652161.568 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:36:15.963Z,1465652175.963 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:36:30.370Z,1465652190.370 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:36:41.477Z,1465652201.477 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:36:44.392Z,1465652204.392 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:36:44.471Z,1465652204.471 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T13:36:44.858Z,1465652204.858 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:36:44.860Z,1465652204.860 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:36:51.546Z,1465652211.546 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T13:38:41.561Z,1465652321.561 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:38:43.570Z,1465652323.570 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:38:45.886Z,1465652325.886 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:38:45.888Z,1465652325.888 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:38:56.730Z,1465652336.730 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 724.629818 min 2016-06-11T13:40:43.912Z,1465652443.912 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:40:45.924Z,1465652445.924 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:40:47.022Z,1465652447.022 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:40:47.024Z,1465652447.024 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:42:00.356Z,1465652520.356 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:42:14.406Z,1465652534.406 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:42:28.421Z,1465652548.421 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:42:42.836Z,1465652562.836 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:42:46.275Z,1465652566.275 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:42:48.001Z,1465652568.001 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:42:48.003Z,1465652568.003 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:42:48.286Z,1465652568.286 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:42:57.211Z,1465652577.211 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:42:57.260Z,1465652577.260 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T13:44:48.289Z,1465652688.289 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:44:49.020Z,1465652689.020 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:44:49.023Z,1465652689.023 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:44:50.299Z,1465652690.299 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:46:50.073Z,1465652810.073 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:46:50.075Z,1465652810.075 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:46:50.642Z,1465652810.642 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:46:50.924Z,1465652810.924 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T13:47:11.676Z,1465652831.676 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T13:48:11.020Z,1465652891.020 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-11T13:48:29.481Z,1465652909.481 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:48:43.867Z,1465652923.867 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:48:58.286Z,1465652938.286 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:49:12.696Z,1465652952.696 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:49:12.743Z,1465652952.743 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T13:49:13.195Z,1465652953.195 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 734.903776 min 2016-06-11T13:49:51.190Z,1465652991.190 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T13:49:51.193Z,1465652991.193 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T13:51:52.234Z,1465653112.234 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:51:52.237Z,1465653112.237 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:53:53.228Z,1465653233.228 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:53:53.230Z,1465653233.230 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:54:28.079Z,1465653268.079 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:54:44.040Z,1465653284.040 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:54:58.455Z,1465653298.455 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:55:12.826Z,1465653312.826 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:55:27.231Z,1465653327.231 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T13:55:27.251Z,1465653327.251 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T13:55:54.140Z,1465653354.140 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:55:54.142Z,1465653354.142 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:56:51.232Z,1465653411.232 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:57:32.742Z,1465653452.742 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T13:57:32.791Z,1465653452.791 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T13:57:55.146Z,1465653475.146 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:57:55.148Z,1465653475.148 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:58:51.629Z,1465653531.629 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T13:58:53.638Z,1465653533.638 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T13:59:29.313Z,1465653569.313 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 745.173568 min 2016-06-11T13:59:56.268Z,1465653596.268 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T13:59:56.270Z,1465653596.270 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:00:42.778Z,1465653642.778 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:00:53.653Z,1465653653.653 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:00:55.668Z,1465653655.668 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:00:56.800Z,1465653656.800 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:01:11.190Z,1465653671.190 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:01:25.586Z,1465653685.586 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:01:39.692Z,1465653699.692 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:01:39.767Z,1465653699.767 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T14:01:57.311Z,1465653717.311 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:01:57.312Z,1465653717.312 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:02:55.983Z,1465653775.983 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:02:57.993Z,1465653777.993 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:03:58.298Z,1465653838.298 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:03:58.300Z,1465653838.300 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:04:58.337Z,1465653898.337 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:05:00.351Z,1465653900.351 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:05:59.411Z,1465653959.411 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:05:59.412Z,1465653959.412 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:06:52.276Z,1465654012.276 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:07:00.383Z,1465654020.383 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:07:00.702Z,1465654020.702 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T14:07:06.666Z,1465654026.666 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:07:20.698Z,1465654040.698 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:07:35.098Z,1465654055.098 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:07:49.129Z,1465654069.129 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:07:49.181Z,1465654069.181 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T14:08:00.323Z,1465654080.323 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:08:00.325Z,1465654080.325 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:09:48.449Z,1465654188.449 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 755.445247 min 2016-06-11T14:09:50.074Z,1465654190.074 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T14:10:01.346Z,1465654201.346 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:10:01.348Z,1465654201.348 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:12:02.265Z,1465654322.265 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:12:02.267Z,1465654322.267 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:13:01.933Z,1465654381.933 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:13:16.334Z,1465654396.334 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:13:30.718Z,1465654410.718 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:13:45.115Z,1465654425.115 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:14:01.609Z,1465654441.609 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:14:01.629Z,1465654441.629 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T14:14:03.219Z,1465654443.219 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:14:03.221Z,1465654443.221 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:16:04.402Z,1465654564.402 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:16:04.404Z,1465654564.404 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:17:00.620Z,1465654620.620 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:18:05.404Z,1465654685.404 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:18:05.407Z,1465654685.407 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:19:00.947Z,1465654740.947 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:19:02.957Z,1465654742.957 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:19:14.379Z,1465654754.379 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:19:28.776Z,1465654768.776 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:19:43.179Z,1465654783.179 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:19:57.592Z,1465654797.592 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:20:08.799Z,1465654808.799 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T14:20:08.858Z,1465654808.858 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 765.785938 min 2016-06-11T14:20:11.707Z,1465654811.707 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:20:11.726Z,1465654811.726 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T14:20:12.209Z,1465654812.209 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:20:12.211Z,1465654812.211 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:21:03.009Z,1465654863.009 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:21:05.018Z,1465654865.018 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:22:13.161Z,1465654933.161 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:22:13.163Z,1465654933.163 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:23:05.411Z,1465654985.411 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:23:13.037Z,1465654993.037 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:24:14.181Z,1465655054.181 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:24:14.183Z,1465655054.183 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:25:13.421Z,1465655113.421 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:25:15.431Z,1465655115.431 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:25:29.249Z,1465655129.249 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:25:43.607Z,1465655143.607 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:25:57.994Z,1465655157.994 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:26:12.396Z,1465655172.396 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:26:15.240Z,1465655175.240 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:26:15.242Z,1465655175.242 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:26:29.242Z,1465655189.242 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:26:29.288Z,1465655189.288 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T14:27:15.786Z,1465655235.786 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:27:16.168Z,1465655236.168 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T14:28:16.204Z,1465655296.204 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:28:16.206Z,1465655296.206 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:30:17.130Z,1465655417.130 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:30:17.132Z,1465655417.132 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:30:29.547Z,1465655429.547 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 776.130208 min 2016-06-11T14:30:29.972Z,1465655429.972 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T14:31:42.073Z,1465655502.073 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:31:56.094Z,1465655516.094 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:32:10.497Z,1465655530.497 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:32:18.079Z,1465655538.079 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:32:18.081Z,1465655538.081 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:32:24.881Z,1465655544.881 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:32:41.421Z,1465655561.421 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:32:41.471Z,1465655561.471 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T14:34:19.109Z,1465655659.109 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:34:19.111Z,1465655659.111 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:36:20.114Z,1465655780.114 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:36:20.116Z,1465655780.116 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:37:16.012Z,1465655836.012 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:37:54.243Z,1465655874.243 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:38:08.251Z,1465655888.251 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:38:21.040Z,1465655901.040 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:38:21.042Z,1465655901.042 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:38:22.620Z,1465655902.620 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:38:37.020Z,1465655917.020 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:38:51.124Z,1465655931.124 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:38:51.142Z,1465655931.142 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T14:39:16.390Z,1465655956.390 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:39:18.402Z,1465655958.402 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:40:22.096Z,1465656022.096 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:40:22.098Z,1465656022.098 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:40:47.339Z,1465656047.339 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 786.473568 min 2016-06-11T14:40:52.301Z,1465656052.301 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T14:41:18.729Z,1465656078.729 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:41:21.156Z,1465656081.156 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:42:23.274Z,1465656143.274 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:42:23.278Z,1465656143.278 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:43:21.516Z,1465656201.516 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:43:23.526Z,1465656203.526 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:44:03.894Z,1465656243.894 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:44:18.276Z,1465656258.276 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:44:24.322Z,1465656264.322 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:44:24.324Z,1465656264.324 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:44:32.306Z,1465656272.306 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:44:46.690Z,1465656286.690 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:45:03.211Z,1465656303.211 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:45:03.254Z,1465656303.254 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T14:45:23.897Z,1465656323.897 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:45:25.907Z,1465656325.907 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:46:25.424Z,1465656385.424 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:46:25.426Z,1465656385.426 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:47:26.311Z,1465656446.311 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:47:26.400Z,1465656446.400 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T14:48:26.409Z,1465656506.409 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:48:26.411Z,1465656506.411 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:50:18.957Z,1465656618.957 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:50:27.369Z,1465656627.369 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:50:27.371Z,1465656627.371 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:50:33.362Z,1465656633.362 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:50:47.776Z,1465656647.776 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:51:02.183Z,1465656662.183 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:51:06.668Z,1465656666.668 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 796.747721 min 2016-06-11T14:51:11.148Z,1465656671.148 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T14:51:11.172Z,1465656671.172 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T14:51:19.154Z,1465656679.154 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:51:19.173Z,1465656679.173 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T14:52:28.418Z,1465656748.418 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:52:28.420Z,1465656748.420 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:54:29.523Z,1465656869.523 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:54:29.525Z,1465656869.525 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:56:30.522Z,1465656990.522 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:56:30.524Z,1465656990.524 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:56:36.906Z,1465656996.906 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:56:50.921Z,1465657010.921 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:57:04.923Z,1465657024.923 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:57:19.293Z,1465657039.293 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:57:27.382Z,1465657047.382 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T14:57:33.378Z,1465657053.378 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T14:57:33.423Z,1465657053.423 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T14:58:31.589Z,1465657111.589 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:58:31.591Z,1465657111.591 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T14:59:27.385Z,1465657167.385 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T14:59:29.395Z,1465657169.395 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:00:32.569Z,1465657232.569 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:00:32.571Z,1465657232.571 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:01:24.612Z,1465657284.612 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 807.095052 min 2016-06-11T15:01:29.711Z,1465657289.711 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:01:31.721Z,1465657291.721 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:02:33.598Z,1465657353.598 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:02:33.600Z,1465657353.600 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:02:46.360Z,1465657366.360 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:02:47.188Z,1465657367.188 [PNI_TCM](FAULT): LCB fault: Current Limiter Activated. 2016-06-11T15:03:00.757Z,1465657380.757 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:03:15.164Z,1465657395.164 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:03:28.461Z,1465657408.461 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T15:03:29.272Z,1465657409.272 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:03:32.100Z,1465657412.100 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:03:34.115Z,1465657414.115 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:03:43.663Z,1465657423.663 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:03:43.712Z,1465657423.712 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T15:04:34.664Z,1465657474.664 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:04:34.666Z,1465657474.666 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:05:34.475Z,1465657534.475 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:05:36.488Z,1465657536.488 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:06:35.498Z,1465657595.498 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:06:35.500Z,1465657595.500 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:07:36.796Z,1465657656.796 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:07:36.923Z,1465657656.923 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T15:08:38.968Z,1465657718.968 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:08:38.969Z,1465657718.969 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:08:57.416Z,1465657737.416 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-11T15:09:11.812Z,1465657751.812 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:09:26.199Z,1465657766.199 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:09:40.637Z,1465657780.637 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:09:57.986Z,1465657797.986 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:09:58.006Z,1465657798.006 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T15:10:57.275Z,1465657857.275 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:10:57.276Z,1465657857.276 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:11:44.055Z,1465657904.055 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 817.373242 min 2016-06-11T15:12:58.239Z,1465657978.239 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:12:58.241Z,1465657978.241 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:13:47.086Z,1465658027.086 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T15:14:59.257Z,1465658099.257 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:14:59.259Z,1465658099.259 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:15:10.419Z,1465658110.419 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:15:24.835Z,1465658124.835 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:15:39.210Z,1465658139.210 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:15:55.699Z,1465658155.699 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:16:10.097Z,1465658170.097 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:16:10.117Z,1465658170.117 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T15:17:00.123Z,1465658220.123 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:17:00.125Z,1465658220.125 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:17:37.078Z,1465658257.078 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:19:01.212Z,1465658341.212 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:19:01.214Z,1465658341.214 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:19:37.433Z,1465658377.433 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:19:39.443Z,1465658379.443 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:21:05.074Z,1465658465.074 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:21:05.076Z,1465658465.076 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:21:23.108Z,1465658483.108 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:21:37.517Z,1465658497.517 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:21:39.771Z,1465658499.771 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:21:41.781Z,1465658501.781 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:21:51.939Z,1465658511.939 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:22:01.947Z,1465658521.947 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 827.717318 min 2016-06-11T15:22:06.035Z,1465658526.035 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:22:20.428Z,1465658540.428 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:22:20.447Z,1465658540.447 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T15:23:07.903Z,1465658587.903 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:23:07.904Z,1465658587.904 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:23:42.178Z,1465658622.178 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:23:44.186Z,1465658624.186 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:24:06.126Z,1465658646.126 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T15:25:08.737Z,1465658708.737 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:25:08.739Z,1465658708.739 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:25:08.752Z,1465658708.752 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-06-11T15:25:08.753Z,1465658708.753 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-06-11T15:25:44.526Z,1465658744.526 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:25:46.537Z,1465658746.537 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:27:33.400Z,1465658853.400 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:27:46.852Z,1465658866.852 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:27:47.035Z,1465658867.035 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T15:27:47.784Z,1465658867.784 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:28:02.185Z,1465658882.185 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:28:16.607Z,1465658896.607 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:28:33.125Z,1465658913.125 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:28:33.160Z,1465658913.160 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T15:32:21.458Z,1465659141.458 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 837.994987 min 2016-06-11T15:33:46.011Z,1465659226.011 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:34:00.044Z,1465659240.044 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:34:14.415Z,1465659254.415 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:34:24.897Z,1465659264.897 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T15:34:28.495Z,1465659268.495 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:34:42.910Z,1465659282.910 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:34:42.927Z,1465659282.927 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T15:37:47.446Z,1465659467.446 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:39:47.846Z,1465659587.846 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:39:49.860Z,1465659589.860 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:39:55.777Z,1465659595.777 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:40:10.182Z,1465659610.182 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:40:24.200Z,1465659624.200 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:40:24.980Z,1465659624.980 [PNI_TCM](FAULT): LCB fault: Current Limiter Activated. 2016-06-11T15:40:38.195Z,1465659638.195 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:40:54.688Z,1465659654.688 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:40:54.769Z,1465659654.769 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T15:41:50.248Z,1465659710.248 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:41:52.258Z,1465659712.258 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:42:09.648Z,1465659729.648 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:42:09.650Z,1465659729.650 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:42:42.067Z,1465659762.067 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 848.338737 min 2016-06-11T15:43:52.265Z,1465659832.265 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:43:54.274Z,1465659834.274 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:44:10.628Z,1465659850.628 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:44:10.630Z,1465659850.630 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:44:44.318Z,1465659884.318 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T15:44:44.378Z,1465659884.378 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T15:45:54.627Z,1465659954.627 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:45:56.637Z,1465659956.637 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:46:07.636Z,1465659967.636 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:46:11.667Z,1465659971.667 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:46:11.669Z,1465659971.669 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:46:22.034Z,1465659982.034 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:46:36.436Z,1465659996.436 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:46:53.336Z,1465660013.336 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:47:07.738Z,1465660027.738 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:47:07.758Z,1465660027.758 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T15:47:56.983Z,1465660076.983 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:47:57.485Z,1465660077.485 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T15:48:12.841Z,1465660092.841 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:48:12.843Z,1465660092.843 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:50:13.718Z,1465660213.718 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:50:13.720Z,1465660213.720 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:52:14.803Z,1465660334.803 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:52:14.805Z,1465660334.805 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:52:20.800Z,1465660340.800 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:52:35.183Z,1465660355.183 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:52:49.580Z,1465660369.580 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:52:59.990Z,1465660379.990 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 858.684896 min 2016-06-11T15:53:03.709Z,1465660383.709 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:53:18.119Z,1465660398.119 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:53:18.163Z,1465660398.163 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T15:54:15.862Z,1465660455.862 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:54:15.864Z,1465660455.864 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:56:16.943Z,1465660576.943 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:56:16.945Z,1465660576.945 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:56:58.910Z,1465660618.910 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T15:57:57.194Z,1465660677.194 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T15:58:20.478Z,1465660700.478 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:58:20.480Z,1465660700.480 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T15:58:35.993Z,1465660715.993 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:58:50.013Z,1465660730.013 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:59:04.389Z,1465660744.389 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:59:18.788Z,1465660758.788 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:59:35.800Z,1465660775.800 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T15:59:35.819Z,1465660775.819 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T15:59:57.218Z,1465660797.218 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T15:59:59.227Z,1465660799.227 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:00:21.002Z,1465660821.002 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:00:21.004Z,1465660821.004 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:01:59.566Z,1465660919.566 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:02:01.581Z,1465660921.581 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:02:22.088Z,1465660942.088 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:02:22.090Z,1465660942.090 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:03:23.081Z,1465661003.081 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 869.068815 min 2016-06-11T16:04:01.584Z,1465661041.584 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:04:03.594Z,1465661043.594 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:04:23.150Z,1465661063.150 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:04:23.168Z,1465661063.168 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:04:48.885Z,1465661088.885 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:05:03.293Z,1465661103.293 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:05:17.669Z,1465661117.669 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:05:31.753Z,1465661131.753 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:05:46.146Z,1465661146.146 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:05:46.195Z,1465661146.195 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T16:06:03.941Z,1465661163.941 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:06:05.951Z,1465661165.951 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:06:26.615Z,1465661186.615 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:06:26.617Z,1465661186.617 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:07:17.468Z,1465661237.468 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T16:08:06.255Z,1465661286.255 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:08:06.391Z,1465661286.391 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T16:08:27.379Z,1465661307.379 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:08:27.381Z,1465661307.381 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:10:28.496Z,1465661428.496 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:10:28.498Z,1465661428.498 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:10:59.012Z,1465661459.012 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:11:13.415Z,1465661473.415 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:11:27.828Z,1465661487.828 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:11:42.226Z,1465661502.226 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:11:55.907Z,1465661515.907 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:11:56.006Z,1465661516.006 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T16:12:29.521Z,1465661549.521 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:12:29.523Z,1465661549.523 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:13:39.141Z,1465661619.141 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 879.337240 min 2016-06-11T16:14:30.430Z,1465661670.430 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:14:30.432Z,1465661670.432 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:16:31.480Z,1465661791.480 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:16:31.482Z,1465661791.482 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:17:08.812Z,1465661828.812 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:17:23.196Z,1465661843.196 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:17:35.992Z,1465661855.992 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T16:17:37.598Z,1465661857.598 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:17:54.076Z,1465661874.076 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:18:06.941Z,1465661886.941 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:18:08.101Z,1465661888.101 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:18:08.162Z,1465661888.162 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T16:18:32.473Z,1465661912.473 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:18:32.474Z,1465661912.474 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:20:07.065Z,1465662007.065 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:20:09.075Z,1465662009.075 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:20:33.529Z,1465662033.529 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:20:33.530Z,1465662033.530 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:22:09.478Z,1465662129.478 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:22:11.488Z,1465662131.488 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:22:34.498Z,1465662154.498 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:22:34.499Z,1465662154.499 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:23:21.071Z,1465662201.071 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:23:35.461Z,1465662215.461 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:23:49.852Z,1465662229.852 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:23:55.545Z,1465662235.545 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 889.609896 min 2016-06-11T16:24:03.938Z,1465662243.938 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:24:11.804Z,1465662251.804 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:24:13.818Z,1465662253.818 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:24:17.973Z,1465662257.973 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:24:18.040Z,1465662258.040 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T16:24:35.559Z,1465662275.559 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:24:35.561Z,1465662275.561 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:26:14.202Z,1465662374.202 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:26:16.216Z,1465662376.216 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:26:36.605Z,1465662396.605 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:26:36.610Z,1465662396.610 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:27:55.050Z,1465662475.050 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T16:28:16.536Z,1465662496.536 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:28:16.888Z,1465662496.888 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T16:28:37.586Z,1465662517.586 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:28:37.587Z,1465662517.587 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:29:31.959Z,1465662571.959 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-11T16:29:46.348Z,1465662586.348 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:30:00.758Z,1465662600.758 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:30:14.840Z,1465662614.840 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:30:28.861Z,1465662628.861 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:30:28.902Z,1465662628.902 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T16:31:31.746Z,1465662691.746 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:31:31.749Z,1465662691.749 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:33:32.817Z,1465662812.817 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:33:32.819Z,1465662812.819 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:34:11.628Z,1465662851.628 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 899.878646 min 2016-06-11T16:35:33.853Z,1465662933.853 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:35:33.855Z,1465662933.855 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:35:41.466Z,1465662941.466 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:35:55.854Z,1465662955.854 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:36:10.256Z,1465662970.256 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:36:26.772Z,1465662986.772 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:36:41.154Z,1465663001.154 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:36:41.240Z,1465663001.240 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T16:37:34.800Z,1465663054.800 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:37:34.802Z,1465663054.802 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:38:18.253Z,1465663098.253 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T16:38:18.309Z,1465663098.309 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T16:38:18.368Z,1465663098.368 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:39:35.680Z,1465663175.680 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:39:35.682Z,1465663175.682 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:40:18.699Z,1465663218.699 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:40:20.709Z,1465663220.709 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:41:36.719Z,1465663296.719 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:41:36.721Z,1465663296.721 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:41:54.296Z,1465663314.296 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:42:08.707Z,1465663328.707 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:42:21.108Z,1465663341.108 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:42:22.721Z,1465663342.721 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:42:23.119Z,1465663343.119 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:42:36.891Z,1465663356.891 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:42:51.290Z,1465663371.290 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:42:51.308Z,1465663371.308 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T16:43:37.754Z,1465663417.754 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:43:37.771Z,1465663417.771 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:44:23.503Z,1465663463.503 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:44:25.517Z,1465663465.517 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:44:31.344Z,1465663471.344 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 910.154036 min 2016-06-11T16:45:38.775Z,1465663538.775 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:45:38.801Z,1465663538.801 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:46:25.556Z,1465663585.556 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:46:27.573Z,1465663587.573 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:47:39.823Z,1465663659.823 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:47:39.825Z,1465663659.825 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:48:04.230Z,1465663684.230 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:48:18.628Z,1465663698.628 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:48:27.629Z,1465663707.629 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T16:48:27.853Z,1465663707.853 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T16:48:32.682Z,1465663712.682 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:48:46.712Z,1465663726.712 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:49:01.109Z,1465663741.109 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:49:01.127Z,1465663741.127 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T16:49:41.355Z,1465663781.355 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:49:41.357Z,1465663781.357 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:50:31.989Z,1465663831.989 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T16:51:42.093Z,1465663902.093 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:51:42.095Z,1465663902.095 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:53:43.095Z,1465664023.095 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:53:43.097Z,1465664023.097 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:54:14.020Z,1465664054.020 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:54:28.426Z,1465664068.426 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:54:42.820Z,1465664082.820 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:54:51.634Z,1465664091.634 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 920.498958 min 2016-06-11T16:54:56.862Z,1465664096.862 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:55:11.276Z,1465664111.276 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T16:55:11.296Z,1465664111.296 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T16:55:44.110Z,1465664144.110 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:55:44.112Z,1465664144.112 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:57:45.045Z,1465664265.045 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:57:45.047Z,1465664265.047 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:58:28.223Z,1465664308.223 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T16:59:46.055Z,1465664386.055 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T16:59:46.057Z,1465664386.057 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:00:23.901Z,1465664423.901 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:00:28.587Z,1465664428.587 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:00:30.597Z,1465664430.597 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:00:38.307Z,1465664438.307 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:00:52.676Z,1465664452.676 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:00:53.071Z,1465664453.071 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T17:01:07.085Z,1465664467.085 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:01:24.063Z,1465664484.063 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:01:24.106Z,1465664484.106 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T17:01:46.872Z,1465664506.872 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:01:46.873Z,1465664506.873 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:02:30.969Z,1465664550.969 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:02:32.979Z,1465664552.979 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:03:47.934Z,1465664627.934 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:03:47.936Z,1465664627.936 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:04:33.006Z,1465664673.006 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:04:35.015Z,1465664675.015 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:05:12.449Z,1465664712.449 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 930.845378 min 2016-06-11T17:05:48.970Z,1465664748.970 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:05:48.972Z,1465664748.972 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:06:35.347Z,1465664795.347 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:06:36.556Z,1465664796.556 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2016-06-11T17:06:37.039Z,1465664797.039 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:06:37.361Z,1465664797.361 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:06:51.432Z,1465664811.432 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:07:05.835Z,1465664825.835 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:07:22.752Z,1465664842.752 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:07:37.155Z,1465664857.155 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:07:37.202Z,1465664857.202 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T17:07:49.983Z,1465664869.983 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:07:49.985Z,1465664869.985 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:08:37.413Z,1465664917.413 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:08:37.468Z,1465664917.468 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T17:09:51.160Z,1465664991.160 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:09:51.162Z,1465664991.162 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:11:14.140Z,1465665074.140 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T17:11:52.240Z,1465665112.240 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:11:52.242Z,1465665112.242 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:12:50.283Z,1465665170.283 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:13:04.705Z,1465665184.705 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:13:19.091Z,1465665199.091 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:13:33.103Z,1465665213.103 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:13:47.211Z,1465665227.211 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:13:47.261Z,1465665227.261 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T17:13:53.213Z,1465665233.213 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:13:53.215Z,1465665233.215 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:15:33.473Z,1465665333.473 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 941.194792 min 2016-06-11T17:15:54.337Z,1465665354.337 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:15:54.339Z,1465665354.339 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:17:55.365Z,1465665475.365 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:17:55.367Z,1465665475.367 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:18:37.678Z,1465665517.678 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:19:00.216Z,1465665540.216 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:19:14.638Z,1465665554.638 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:19:29.025Z,1465665569.025 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:19:46.311Z,1465665586.311 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:19:56.313Z,1465665596.313 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:19:56.315Z,1465665596.315 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:20:00.721Z,1465665600.721 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:20:00.773Z,1465665600.773 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T17:20:38.079Z,1465665638.079 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:20:40.088Z,1465665640.088 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:21:35.649Z,1465665695.649 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T17:21:57.340Z,1465665717.340 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:21:57.341Z,1465665717.341 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:22:40.447Z,1465665760.447 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:22:42.458Z,1465665762.458 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:23:58.403Z,1465665838.403 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:23:58.406Z,1465665838.406 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:24:42.510Z,1465665882.510 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:24:44.527Z,1465665884.527 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:25:13.738Z,1465665913.738 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:25:28.140Z,1465665928.140 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:25:42.536Z,1465665942.536 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:25:51.352Z,1465665951.352 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 951.540951 min 2016-06-11T17:25:56.638Z,1465665956.638 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:25:59.464Z,1465665959.464 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:25:59.466Z,1465665959.466 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:26:10.658Z,1465665970.658 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:26:10.679Z,1465665970.679 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T17:26:44.874Z,1465666004.874 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:26:46.885Z,1465666006.885 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:28:00.507Z,1465666080.507 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:28:00.509Z,1465666080.509 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:28:47.228Z,1465666127.228 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:28:47.321Z,1465666127.321 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T17:30:01.470Z,1465666201.470 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:30:01.472Z,1465666201.472 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:31:23.729Z,1465666283.729 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:31:38.136Z,1465666298.136 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:31:52.524Z,1465666312.524 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:31:56.924Z,1465666316.924 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T17:31:56.947Z,1465666316.947 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T17:32:02.581Z,1465666322.581 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:32:02.583Z,1465666322.583 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:32:06.940Z,1465666326.940 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:32:24.270Z,1465666344.270 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:32:24.317Z,1465666344.317 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T17:34:03.426Z,1465666443.426 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:34:03.427Z,1465666443.427 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:36:04.420Z,1465666564.420 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:36:04.421Z,1465666564.421 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:36:07.656Z,1465666567.656 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 961.812500 min 2016-06-11T17:37:37.452Z,1465666657.452 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:37:51.862Z,1465666671.862 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:38:05.475Z,1465666685.475 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:38:05.481Z,1465666685.481 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:38:06.263Z,1465666686.263 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:38:26.705Z,1465666706.705 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:38:41.106Z,1465666721.106 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:38:41.178Z,1465666721.178 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T17:38:47.843Z,1465666727.843 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:40:06.484Z,1465666806.484 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:40:06.486Z,1465666806.486 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:40:47.858Z,1465666847.858 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:40:49.867Z,1465666849.867 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:42:07.629Z,1465666927.629 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:42:07.631Z,1465666927.631 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:42:50.175Z,1465666970.175 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:42:52.185Z,1465666972.185 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:43:53.940Z,1465667033.940 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:44:07.955Z,1465667047.955 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:44:08.761Z,1465667048.761 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:44:08.763Z,1465667048.763 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:44:13.120Z,1465667053.120 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T17:44:22.336Z,1465667062.336 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:44:38.913Z,1465667078.913 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:44:52.557Z,1465667092.557 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:44:53.293Z,1465667093.293 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:44:53.312Z,1465667093.312 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T17:44:54.571Z,1465667094.571 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:46:09.928Z,1465667169.928 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:46:09.930Z,1465667169.930 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:46:23.893Z,1465667183.893 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 972.083073 min 2016-06-11T17:46:54.901Z,1465667214.901 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:46:57.322Z,1465667217.322 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:48:11.029Z,1465667291.029 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:48:11.031Z,1465667291.031 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:48:57.641Z,1465667337.641 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T17:48:57.974Z,1465667337.974 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T17:50:07.195Z,1465667407.195 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-11T17:50:21.194Z,1465667421.194 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:50:38.061Z,1465667438.061 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:50:52.469Z,1465667452.469 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:51:06.873Z,1465667466.873 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:51:06.893Z,1465667466.893 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T17:51:12.089Z,1465667472.089 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T17:51:12.091Z,1465667472.091 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T17:53:13.037Z,1465667593.037 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:53:13.038Z,1465667593.038 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:54:31.058Z,1465667671.058 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T17:55:13.918Z,1465667713.918 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:55:13.920Z,1465667713.920 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:56:19.620Z,1465667779.620 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:56:34.012Z,1465667794.012 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:56:42.877Z,1465667802.877 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 982.351953 min 2016-06-11T17:56:48.156Z,1465667808.156 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:57:02.554Z,1465667822.554 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:57:03.331Z,1465667823.331 [PNI_TCM](FAULT): LCB fault: Current Limiter Activated. 2016-06-11T17:57:14.968Z,1465667834.968 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:57:14.970Z,1465667834.970 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:57:16.948Z,1465667836.948 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T17:57:17.004Z,1465667837.004 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T17:58:58.291Z,1465667938.291 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T17:59:15.896Z,1465667955.896 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T17:59:15.897Z,1465667955.897 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:00:58.687Z,1465668058.687 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:01:00.697Z,1465668060.697 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:01:16.902Z,1465668076.902 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:01:16.904Z,1465668076.904 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:02:29.938Z,1465668149.938 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:02:44.344Z,1465668164.344 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:02:58.758Z,1465668178.758 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:03:01.001Z,1465668181.001 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:03:03.412Z,1465668183.412 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:03:15.288Z,1465668195.288 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:03:18.140Z,1465668198.140 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:03:18.142Z,1465668198.142 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:03:29.654Z,1465668209.654 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:03:29.675Z,1465668209.675 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T18:04:50.172Z,1465668290.172 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T18:05:03.423Z,1465668303.423 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:05:05.432Z,1465668305.432 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:05:19.091Z,1465668319.091 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:05:19.093Z,1465668319.093 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:07:03.675Z,1465668423.675 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 992.698828 min 2016-06-11T18:07:05.464Z,1465668425.464 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:07:07.474Z,1465668427.474 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:07:20.124Z,1465668440.124 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:07:20.126Z,1465668440.126 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:08:42.632Z,1465668522.632 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:08:57.042Z,1465668537.042 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:09:07.773Z,1465668547.773 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:09:08.035Z,1465668548.035 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T18:09:13.964Z,1465668553.964 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:09:21.206Z,1465668561.206 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:09:21.208Z,1465668561.208 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:09:28.368Z,1465668568.368 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:09:42.793Z,1465668582.793 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:09:42.833Z,1465668582.833 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T18:11:22.104Z,1465668682.104 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:11:22.105Z,1465668682.105 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:13:25.403Z,1465668805.403 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:13:25.406Z,1465668805.406 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:14:55.603Z,1465668895.603 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:15:07.988Z,1465668907.988 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T18:15:10.005Z,1465668910.005 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:15:24.122Z,1465668924.122 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:15:26.073Z,1465668926.073 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:15:26.075Z,1465668926.075 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:15:38.476Z,1465668938.476 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:15:52.866Z,1465668952.866 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:15:52.908Z,1465668952.908 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T18:17:24.194Z,1465669044.194 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1003.040820 min 2016-06-11T18:17:27.046Z,1465669047.046 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:17:27.048Z,1465669047.048 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:19:08.043Z,1465669148.043 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:19:28.033Z,1465669168.033 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:19:28.035Z,1465669168.035 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:21:05.712Z,1465669265.712 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:21:08.396Z,1465669268.396 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:21:10.409Z,1465669270.409 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:21:20.126Z,1465669280.126 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:21:29.103Z,1465669289.103 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:21:29.105Z,1465669289.105 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:21:37.092Z,1465669297.092 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:21:51.122Z,1465669311.122 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:22:05.520Z,1465669325.520 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:22:05.564Z,1465669325.564 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T18:23:10.413Z,1465669390.413 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:23:12.430Z,1465669392.430 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:23:30.164Z,1465669410.164 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:23:30.165Z,1465669410.165 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:25:12.626Z,1465669512.626 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:25:14.635Z,1465669514.635 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:25:26.484Z,1465669526.484 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T18:25:26.555Z,1465669526.555 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T18:25:31.300Z,1465669531.300 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:25:31.302Z,1465669531.302 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:27:14.943Z,1465669634.943 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:27:16.952Z,1465669636.952 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:27:18.333Z,1465669638.333 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:27:32.333Z,1465669652.333 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:27:32.335Z,1465669652.335 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:27:32.727Z,1465669652.727 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:27:41.953Z,1465669661.953 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1013.384049 min 2016-06-11T18:27:46.878Z,1465669666.878 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:28:00.899Z,1465669680.899 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:28:15.294Z,1465669695.294 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:28:15.375Z,1465669695.375 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T18:29:17.232Z,1465669757.232 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:29:17.440Z,1465669757.440 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T18:29:33.408Z,1465669773.408 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:29:33.421Z,1465669773.421 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:31:34.394Z,1465669894.394 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:31:34.423Z,1465669894.423 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:33:28.171Z,1465670008.171 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:33:35.399Z,1465670015.399 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:33:35.401Z,1465670015.401 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:33:42.555Z,1465670022.555 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:33:56.983Z,1465670036.983 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:34:13.945Z,1465670053.945 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:34:28.344Z,1465670068.344 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:34:28.364Z,1465670068.364 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T18:35:36.499Z,1465670136.499 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:35:36.501Z,1465670136.501 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:37:37.562Z,1465670257.562 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:37:37.564Z,1465670257.564 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:37:39.940Z,1465670259.940 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T18:37:58.370Z,1465670278.370 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1023.657747 min 2016-06-11T18:39:17.430Z,1465670357.430 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:39:38.505Z,1465670378.505 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:39:38.507Z,1465670378.507 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:39:41.306Z,1465670381.306 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:39:55.323Z,1465670395.323 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:40:12.210Z,1465670412.210 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:40:26.616Z,1465670426.616 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:40:41.009Z,1465670441.009 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:40:41.028Z,1465670441.028 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T18:41:17.773Z,1465670477.773 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:41:19.783Z,1465670479.783 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:41:39.544Z,1465670499.544 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:41:39.547Z,1465670499.547 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:43:20.207Z,1465670600.207 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:43:25.030Z,1465670605.030 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:43:40.558Z,1465670620.558 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:43:40.560Z,1465670620.560 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:45:25.349Z,1465670725.349 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:45:27.359Z,1465670727.359 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:45:41.658Z,1465670741.658 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:45:41.660Z,1465670741.660 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:45:54.063Z,1465670754.063 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:46:08.437Z,1465670768.437 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:46:23.703Z,1465670783.703 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:46:37.823Z,1465670797.823 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:46:52.231Z,1465670812.231 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:46:52.250Z,1465670812.250 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T18:47:27.643Z,1465670847.643 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:47:29.657Z,1465670849.657 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:47:42.780Z,1465670862.780 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:47:42.782Z,1465670862.782 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:47:58.748Z,1465670878.748 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T18:48:20.816Z,1465670900.816 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1034.031771 min 2016-06-11T18:49:30.025Z,1465670970.025 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T18:49:30.285Z,1465670970.285 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T18:49:43.845Z,1465670983.845 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:49:43.847Z,1465670983.847 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:51:44.861Z,1465671104.861 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:51:44.862Z,1465671104.862 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:52:05.257Z,1465671125.257 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:52:19.669Z,1465671139.669 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:52:36.555Z,1465671156.555 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:52:50.973Z,1465671170.973 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:53:04.971Z,1465671184.971 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:53:05.039Z,1465671185.039 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T18:53:45.808Z,1465671225.808 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:53:45.810Z,1465671225.810 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:55:46.823Z,1465671346.823 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:55:46.825Z,1465671346.825 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:57:47.878Z,1465671467.878 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:57:47.880Z,1465671467.880 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:58:17.897Z,1465671497.897 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:58:19.041Z,1465671499.041 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T18:58:32.251Z,1465671512.251 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:58:39.900Z,1465671519.900 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1044.303776 min 2016-06-11T18:58:46.360Z,1465671526.360 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:59:00.759Z,1465671540.759 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:59:15.169Z,1465671555.169 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T18:59:15.213Z,1465671555.213 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T18:59:30.606Z,1465671570.606 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T18:59:48.920Z,1465671588.920 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T18:59:48.921Z,1465671588.921 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:01:30.982Z,1465671690.982 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:01:32.992Z,1465671692.992 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:01:49.991Z,1465671709.991 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:01:49.993Z,1465671709.993 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:03:33.004Z,1465671813.004 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:03:35.022Z,1465671815.022 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:03:50.865Z,1465671830.865 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:03:50.867Z,1465671830.867 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:03:50.896Z,1465671830.896 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-06-11T19:03:50.897Z,1465671830.897 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-06-11T19:04:27.942Z,1465671867.942 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:04:42.335Z,1465671882.335 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:04:56.719Z,1465671896.719 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:05:13.666Z,1465671913.666 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:05:27.686Z,1465671927.686 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:05:27.737Z,1465671927.737 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T19:05:35.060Z,1465671935.060 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:05:37.071Z,1465671937.071 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:07:37.375Z,1465672057.375 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:07:39.384Z,1465672059.384 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:08:38.001Z,1465672118.001 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T19:09:01.321Z,1465672141.321 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1054.658854 min 2016-06-11T19:09:39.404Z,1465672179.404 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:09:39.791Z,1465672179.791 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T19:10:41.851Z,1465672241.851 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-11T19:10:57.452Z,1465672257.452 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-11T19:11:14.374Z,1465672274.374 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:11:28.771Z,1465672288.771 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:11:43.173Z,1465672303.173 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:11:43.190Z,1465672303.190 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T19:16:55.943Z,1465672615.943 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:17:10.341Z,1465672630.341 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:17:24.410Z,1465672644.410 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:17:38.816Z,1465672658.816 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:17:53.203Z,1465672673.203 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:17:53.220Z,1465672673.220 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T19:18:55.263Z,1465672735.263 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T19:18:55.287Z,1465672735.287 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T19:19:22.112Z,1465672762.112 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1065.006120 min 2016-06-11T19:19:40.030Z,1465672780.030 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:20:51.472Z,1465672851.472 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:20:51.474Z,1465672851.474 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:21:40.393Z,1465672900.393 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:21:42.427Z,1465672902.427 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:22:52.548Z,1465672972.548 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:22:52.550Z,1465672972.550 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:23:06.137Z,1465672986.137 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:23:22.563Z,1465673002.563 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:23:36.659Z,1465673016.659 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:23:42.771Z,1465673022.771 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:23:44.781Z,1465673024.781 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:23:51.073Z,1465673031.073 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:24:05.460Z,1465673045.460 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:24:05.538Z,1465673045.538 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T19:24:53.364Z,1465673093.364 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:24:53.365Z,1465673093.365 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:25:45.097Z,1465673145.097 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:25:47.106Z,1465673147.106 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:26:54.295Z,1465673214.295 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:26:54.297Z,1465673214.297 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:27:47.470Z,1465673267.470 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:27:49.480Z,1465673269.480 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:28:55.358Z,1465673335.358 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:28:55.360Z,1465673335.360 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:29:18.153Z,1465673358.153 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:29:32.543Z,1465673372.543 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:29:43.073Z,1465673383.073 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1075.354362 min 2016-06-11T19:29:46.754Z,1465673386.754 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:29:49.496Z,1465673389.496 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:29:49.599Z,1465673389.599 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T19:30:01.154Z,1465673401.154 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:30:15.521Z,1465673415.521 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:30:15.541Z,1465673415.541 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T19:30:56.417Z,1465673456.417 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:30:56.420Z,1465673456.420 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:31:08.795Z,1465673468.795 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T19:32:43.273Z,1465673563.273 [CBIT](IMPORTANT): Beginning GF scan 2016-06-11T19:32:57.326Z,1465673577.326 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:32:57.328Z,1465673577.328 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:34:58.212Z,1465673698.212 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:34:58.214Z,1465673698.214 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:35:28.254Z,1465673728.254 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:35:42.645Z,1465673742.645 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:35:56.665Z,1465673756.665 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:36:13.552Z,1465673773.552 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:36:27.924Z,1465673787.924 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:36:27.942Z,1465673787.942 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T19:36:59.173Z,1465673819.173 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:36:59.175Z,1465673819.175 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:39:00.205Z,1465673940.205 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:39:00.207Z,1465673940.207 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:39:49.693Z,1465673989.693 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:40:03.569Z,1465674003.569 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1085.696680 min 2016-06-11T19:41:03.746Z,1465674063.746 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:41:03.749Z,1465674063.749 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:41:26.577Z,1465674086.577 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T19:41:40.984Z,1465674100.984 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:41:50.001Z,1465674110.001 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:41:52.011Z,1465674112.011 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:41:55.415Z,1465674115.415 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:42:09.487Z,1465674129.487 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:42:23.886Z,1465674143.886 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:42:38.281Z,1465674158.281 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:42:38.334Z,1465674158.334 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T19:43:04.504Z,1465674184.504 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:43:04.506Z,1465674184.506 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:43:52.314Z,1465674232.314 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:43:54.325Z,1465674234.325 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:45:05.565Z,1465674305.565 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:45:05.567Z,1465674305.567 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:45:54.688Z,1465674354.688 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:45:56.698Z,1465674356.698 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:47:09.437Z,1465674429.437 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:47:09.469Z,1465674429.469 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:47:50.750Z,1465674470.750 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:47:57.074Z,1465674477.074 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:47:59.088Z,1465674479.088 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T19:48:05.143Z,1465674485.143 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:48:19.535Z,1465674499.535 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:48:36.880Z,1465674516.880 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:48:51.294Z,1465674531.294 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:48:51.313Z,1465674531.313 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T19:49:10.519Z,1465674550.519 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:49:10.521Z,1465674550.521 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:49:59.139Z,1465674599.139 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T19:49:59.499Z,1465674599.499 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T19:50:24.716Z,1465674624.716 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1096.049479 min 2016-06-11T19:51:11.561Z,1465674671.561 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:51:11.563Z,1465674671.563 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:51:46.009Z,1465674706.009 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T19:53:12.521Z,1465674792.521 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:53:12.523Z,1465674792.523 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:54:03.764Z,1465674843.764 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:54:18.159Z,1465674858.159 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:54:35.044Z,1465674875.044 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:54:49.468Z,1465674889.468 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:55:03.478Z,1465674903.478 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T19:55:03.547Z,1465674903.547 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T19:55:13.469Z,1465674913.469 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:55:13.471Z,1465674913.471 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:57:14.506Z,1465675034.506 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:57:14.508Z,1465675034.508 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:59:15.493Z,1465675155.493 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:59:15.495Z,1465675155.495 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T19:59:59.337Z,1465675199.337 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:00:16.437Z,1465675216.437 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:00:30.839Z,1465675230.839 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:00:42.515Z,1465675242.515 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1106.392057 min 2016-06-11T20:00:45.683Z,1465675245.683 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:00:59.809Z,1465675259.809 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:01:14.202Z,1465675274.202 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:01:14.221Z,1465675274.221 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T20:01:16.607Z,1465675276.607 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:01:16.609Z,1465675276.609 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:01:59.680Z,1465675319.680 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:02:01.690Z,1465675321.690 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:02:03.486Z,1465675323.486 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T20:03:17.650Z,1465675397.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:03:17.659Z,1465675397.659 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:04:02.030Z,1465675442.030 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:04:04.040Z,1465675444.040 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:05:18.668Z,1465675518.668 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:05:18.670Z,1465675518.670 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:06:04.076Z,1465675564.076 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:06:06.085Z,1465675566.085 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:06:27.177Z,1465675587.177 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:06:41.602Z,1465675601.602 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:06:55.980Z,1465675615.980 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:07:12.499Z,1465675632.499 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:07:19.712Z,1465675639.712 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:07:19.714Z,1465675639.714 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:07:26.896Z,1465675646.896 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:07:26.915Z,1465675646.915 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T20:08:06.425Z,1465675686.425 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:08:08.443Z,1465675688.443 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:09:20.811Z,1465675760.811 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:09:20.813Z,1465675760.813 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:10:08.686Z,1465675808.686 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:10:08.931Z,1465675808.931 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T20:11:01.756Z,1465675861.756 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1116.667448 min 2016-06-11T20:11:21.805Z,1465675881.805 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:11:21.807Z,1465675881.807 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:12:21.865Z,1465675941.865 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T20:12:21.913Z,1465675941.913 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T20:12:39.873Z,1465675959.873 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:12:54.275Z,1465675974.275 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:13:08.310Z,1465675988.310 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:13:22.703Z,1465676002.703 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:13:22.710Z,1465676002.710 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:13:22.712Z,1465676002.712 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:13:37.114Z,1465676017.114 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:13:37.133Z,1465676017.133 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T20:15:23.720Z,1465676123.720 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:15:23.722Z,1465676123.722 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:17:24.585Z,1465676244.585 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:17:24.587Z,1465676244.587 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:18:50.280Z,1465676330.280 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:19:04.657Z,1465676344.657 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:19:19.066Z,1465676359.066 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:19:25.627Z,1465676365.627 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:19:25.629Z,1465676365.629 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:19:36.416Z,1465676376.416 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:19:50.433Z,1465676390.433 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:19:50.482Z,1465676390.482 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T20:20:08.916Z,1465676408.916 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:21:19.374Z,1465676479.374 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1127.007812 min 2016-06-11T20:21:26.772Z,1465676486.772 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:21:26.774Z,1465676486.774 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:22:09.255Z,1465676529.255 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:22:11.269Z,1465676531.269 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:23:27.855Z,1465676607.855 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:23:27.857Z,1465676607.857 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:24:11.582Z,1465676651.582 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:24:13.595Z,1465676653.595 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:24:34.770Z,1465676674.770 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T20:25:03.585Z,1465676703.585 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:25:17.982Z,1465676717.982 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:25:28.992Z,1465676728.992 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:25:28.994Z,1465676728.994 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:25:34.583Z,1465676734.583 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:25:48.974Z,1465676748.974 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:26:03.364Z,1465676763.364 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-11T20:26:03.404Z,1465676763.404 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-11T20:26:13.935Z,1465676773.935 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:26:15.945Z,1465676775.945 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:27:29.968Z,1465676849.968 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:27:29.970Z,1465676849.970 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:28:16.261Z,1465676896.261 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:28:18.283Z,1465676898.283 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:29:30.775Z,1465676970.775 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:29:30.777Z,1465676970.777 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-11T20:30:18.627Z,1465677018.627 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:30:18.934Z,1465677018.934 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T20:31:17.041Z,1465677077.041 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-11T20:31:39.082Z,1465677099.082 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1137.289844 min 2016-06-11T20:32:31.586Z,1465677151.586 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:32:31.588Z,1465677151.588 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:34:55.007Z,1465677295.007 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T20:35:32.641Z,1465677332.641 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:35:32.643Z,1465677332.643 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:38:33.841Z,1465677513.841 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:38:33.843Z,1465677513.843 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:40:19.224Z,1465677619.224 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:41:34.980Z,1465677694.980 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:41:35.002Z,1465677695.002 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:41:59.826Z,1465677719.826 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1147.635286 min 2016-06-11T20:42:19.580Z,1465677739.580 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:42:21.594Z,1465677741.594 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:44:21.894Z,1465677861.894 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:44:23.904Z,1465677863.904 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:44:35.838Z,1465677875.838 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:44:35.840Z,1465677875.840 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:45:13.942Z,1465677913.942 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T20:46:24.240Z,1465677984.240 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:46:26.250Z,1465677986.250 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:47:36.755Z,1465678056.755 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:47:36.757Z,1465678056.757 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:48:26.622Z,1465678106.622 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:48:28.639Z,1465678108.639 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T20:50:29.010Z,1465678229.010 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T20:50:29.101Z,1465678229.101 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T20:50:37.908Z,1465678237.908 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:50:37.910Z,1465678237.910 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:52:20.810Z,1465678340.810 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1157.985286 min 2016-06-11T20:53:39.037Z,1465678419.037 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:53:39.039Z,1465678419.039 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:55:33.634Z,1465678533.634 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T20:56:40.207Z,1465678600.207 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:56:40.210Z,1465678600.210 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:59:41.302Z,1465678781.302 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T20:59:41.304Z,1465678781.304 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:00:29.649Z,1465678829.649 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:02:30.020Z,1465678950.020 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:02:32.031Z,1465678952.031 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:02:41.715Z,1465678961.715 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1168.333073 min 2016-06-11T21:02:41.846Z,1465678961.846 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:02:41.848Z,1465678961.848 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:04:32.415Z,1465679072.415 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:04:34.825Z,1465679074.825 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:05:43.013Z,1465679143.013 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:05:43.015Z,1465679143.015 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:05:53.388Z,1465679153.388 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T21:05:53.423Z,1465679153.423 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T21:06:35.133Z,1465679195.133 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:06:37.142Z,1465679197.142 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:08:37.535Z,1465679317.535 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:08:39.549Z,1465679319.549 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:08:44.089Z,1465679324.089 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:08:44.091Z,1465679324.091 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:10:39.575Z,1465679439.575 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:10:39.608Z,1465679439.608 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T21:11:45.346Z,1465679505.346 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:11:45.348Z,1465679505.348 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:13:04.732Z,1465679584.732 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1178.762240 min 2016-06-11T21:14:46.174Z,1465679686.174 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:14:46.176Z,1465679686.176 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:17:47.226Z,1465679867.226 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:17:47.228Z,1465679867.228 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:18:12.120Z,1465679892.120 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T21:20:39.839Z,1465680039.839 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:20:48.081Z,1465680048.081 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:20:48.087Z,1465680048.087 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:22:40.228Z,1465680160.228 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:22:42.239Z,1465680162.239 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:23:34.416Z,1465680214.416 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1189.211198 min 2016-06-11T21:23:48.899Z,1465680228.899 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:23:48.901Z,1465680228.901 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:24:42.295Z,1465680282.295 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:24:44.304Z,1465680284.304 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:26:44.648Z,1465680404.648 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:26:46.666Z,1465680406.666 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:26:49.748Z,1465680409.748 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:26:49.750Z,1465680409.750 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:28:35.588Z,1465680515.588 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T21:28:46.989Z,1465680526.989 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:28:50.202Z,1465680530.202 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:29:50.828Z,1465680590.828 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:29:50.830Z,1465680590.830 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:30:50.232Z,1465680650.232 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:30:50.285Z,1465680650.285 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T21:32:52.042Z,1465680772.042 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:32:52.044Z,1465680772.044 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:33:52.535Z,1465680832.535 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1199.560156 min 2016-06-11T21:35:55.954Z,1465680955.954 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:35:55.956Z,1465680955.956 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:38:56.544Z,1465681136.544 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:38:56.547Z,1465681136.547 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:38:56.888Z,1465681136.888 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T21:40:50.919Z,1465681250.919 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:41:57.569Z,1465681317.569 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:41:57.571Z,1465681317.571 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:42:51.314Z,1465681371.314 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:42:53.337Z,1465681373.337 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:44:08.740Z,1465681448.740 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1209.830469 min 2016-06-11T21:44:53.713Z,1465681493.713 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:44:56.143Z,1465681496.143 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:44:58.511Z,1465681498.511 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:44:58.513Z,1465681498.513 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:46:56.487Z,1465681616.487 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:46:58.497Z,1465681618.497 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:47:59.433Z,1465681679.433 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:47:59.436Z,1465681679.436 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:48:58.849Z,1465681738.849 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:49:00.858Z,1465681740.858 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T21:49:18.399Z,1465681758.399 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T21:51:00.546Z,1465681860.546 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:51:00.564Z,1465681860.564 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:51:01.239Z,1465681861.239 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T21:51:01.365Z,1465681861.365 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T21:54:01.599Z,1465682041.599 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:54:01.601Z,1465682041.601 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:54:28.406Z,1465682068.406 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1220.111328 min 2016-06-11T21:57:02.687Z,1465682222.687 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:57:02.690Z,1465682222.690 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T21:59:38.648Z,1465682378.648 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T21:59:38.709Z,1465682378.709 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T22:00:03.776Z,1465682403.776 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:00:03.778Z,1465682403.778 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:01:01.889Z,1465682461.889 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:03:02.268Z,1465682582.268 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:03:04.287Z,1465682584.287 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:03:04.603Z,1465682584.603 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:03:04.605Z,1465682584.605 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:04:46.261Z,1465682686.261 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1230.455859 min 2016-06-11T22:05:04.438Z,1465682704.438 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:05:06.447Z,1465682706.447 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:06:05.425Z,1465682765.425 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:06:05.427Z,1465682765.427 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:07:06.799Z,1465682826.799 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:07:08.818Z,1465682828.818 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:09:06.656Z,1465682946.656 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:09:06.658Z,1465682946.658 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:09:09.148Z,1465682949.148 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:09:11.159Z,1465682951.159 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:11:11.474Z,1465683071.474 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:11:11.791Z,1465683071.791 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T22:11:50.944Z,1465683110.944 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T22:12:07.473Z,1465683127.473 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:12:07.476Z,1465683127.476 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:15:05.667Z,1465683305.667 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1240.732812 min 2016-06-11T22:15:08.534Z,1465683308.534 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:15:08.536Z,1465683308.536 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:18:09.543Z,1465683489.543 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:18:09.550Z,1465683489.550 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:21:10.644Z,1465683670.644 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:21:10.663Z,1465683670.663 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:21:12.073Z,1465683672.073 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:22:08.694Z,1465683728.694 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T22:23:12.129Z,1465683792.129 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:23:14.151Z,1465683794.151 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:24:11.641Z,1465683851.641 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:24:11.643Z,1465683851.643 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:25:14.313Z,1465683914.313 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:25:16.324Z,1465683916.324 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:25:26.640Z,1465683926.640 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1251.081250 min 2016-06-11T22:27:12.574Z,1465684032.574 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:27:12.577Z,1465684032.577 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:27:16.714Z,1465684036.714 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:27:18.725Z,1465684038.725 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:29:19.093Z,1465684159.093 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:29:21.103Z,1465684161.103 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:30:13.475Z,1465684213.475 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:30:13.477Z,1465684213.477 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:31:21.178Z,1465684281.178 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:31:21.309Z,1465684281.309 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T22:32:28.162Z,1465684348.162 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T22:33:14.383Z,1465684394.383 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:33:14.385Z,1465684394.385 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:35:47.710Z,1465684547.710 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1261.433724 min 2016-06-11T22:36:15.387Z,1465684575.387 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:36:15.389Z,1465684575.389 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:39:16.608Z,1465684756.608 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:39:16.614Z,1465684756.614 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:41:21.764Z,1465684881.764 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:42:17.665Z,1465684937.665 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:42:17.667Z,1465684937.667 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:42:49.618Z,1465684969.618 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T22:43:21.779Z,1465685001.779 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:43:23.790Z,1465685003.790 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:45:18.525Z,1465685118.525 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:45:18.527Z,1465685118.527 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:45:24.177Z,1465685124.177 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:45:26.187Z,1465685126.187 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:46:08.561Z,1465685168.561 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1271.779818 min 2016-06-11T22:47:26.503Z,1465685246.503 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:47:28.517Z,1465685248.517 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:48:19.569Z,1465685299.569 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:48:19.592Z,1465685299.592 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:49:28.860Z,1465685368.860 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:49:30.870Z,1465685370.870 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T22:51:20.739Z,1465685480.739 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:51:20.741Z,1465685480.741 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:51:30.886Z,1465685490.886 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T22:51:31.065Z,1465685491.065 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T22:53:14.310Z,1465685594.310 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T22:53:14.409Z,1465685594.409 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T22:54:24.465Z,1465685664.465 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:54:24.467Z,1465685664.467 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:56:29.929Z,1465685789.929 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1282.137109 min 2016-06-11T22:57:25.655Z,1465685845.655 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T22:57:25.657Z,1465685845.657 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:00:26.656Z,1465686026.656 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:00:26.675Z,1465686026.675 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:01:31.131Z,1465686091.131 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:03:30.702Z,1465686210.702 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:03:30.709Z,1465686210.709 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:03:31.138Z,1465686211.138 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:03:33.148Z,1465686213.148 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:05:27.796Z,1465686327.796 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T23:05:33.524Z,1465686333.524 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:05:35.538Z,1465686335.538 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:06:31.667Z,1465686391.667 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:06:31.669Z,1465686391.669 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:06:48.071Z,1465686408.071 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1292.485938 min 2016-06-11T23:07:35.906Z,1465686455.906 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:07:37.915Z,1465686457.915 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:09:32.467Z,1465686572.467 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:09:32.474Z,1465686572.474 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:09:38.240Z,1465686578.240 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:09:40.250Z,1465686580.250 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:11:40.609Z,1465686700.609 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:11:40.706Z,1465686700.706 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T23:12:33.554Z,1465686753.554 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:12:33.556Z,1465686753.556 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:15:34.580Z,1465686934.580 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:15:34.582Z,1465686934.582 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:15:45.298Z,1465686945.298 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T23:17:04.272Z,1465687024.272 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1302.755469 min 2016-06-11T23:18:35.505Z,1465687115.505 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:18:35.511Z,1465687115.511 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:21:36.627Z,1465687296.627 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:21:36.629Z,1465687296.629 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:21:40.826Z,1465687300.826 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:23:41.151Z,1465687421.151 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:23:43.164Z,1465687423.164 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:24:37.771Z,1465687477.771 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:24:37.773Z,1465687477.773 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:25:43.556Z,1465687543.556 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:25:45.566Z,1465687545.566 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:26:03.808Z,1465687563.808 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T23:27:23.615Z,1465687643.615 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1313.031641 min 2016-06-11T23:27:38.923Z,1465687658.923 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:27:38.925Z,1465687658.925 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:27:45.901Z,1465687665.901 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:27:47.911Z,1465687667.911 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:29:48.275Z,1465687788.275 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:29:50.286Z,1465687790.286 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:30:39.944Z,1465687839.944 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:30:39.946Z,1465687839.946 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:31:50.605Z,1465687910.605 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:31:50.926Z,1465687910.926 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T23:33:41.048Z,1465688021.048 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:33:41.050Z,1465688021.050 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:36:25.351Z,1465688185.351 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T23:36:44.678Z,1465688204.678 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:36:44.684Z,1465688204.684 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:37:44.842Z,1465688264.842 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1323.384115 min 2016-06-11T23:39:45.482Z,1465688385.482 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:39:45.484Z,1465688385.484 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:41:50.883Z,1465688510.883 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:42:46.566Z,1465688566.566 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:42:46.569Z,1465688566.569 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:43:51.219Z,1465688631.219 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:43:53.245Z,1465688633.245 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:45:50.376Z,1465688750.376 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:45:50.378Z,1465688750.378 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-11T23:45:50.390Z,1465688750.390 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-06-11T23:45:50.390Z,1465688750.390 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-06-11T23:45:53.552Z,1465688753.552 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:45:55.578Z,1465688755.578 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:46:48.093Z,1465688808.093 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-11T23:46:48.183Z,1465688808.183 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-11T23:47:55.905Z,1465688875.905 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:47:57.915Z,1465688877.915 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:48:02.612Z,1465688882.612 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1333.729036 min 2016-06-11T23:49:57.920Z,1465688997.920 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:49:59.933Z,1465688999.933 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-11T23:51:59.992Z,1465689119.992 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-11T23:52:00.338Z,1465689120.338 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-11T23:58:31.736Z,1465689511.736 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1344.166667 min 2016-06-11T23:59:00.969Z,1465689540.969 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T00:02:00.194Z,1465689720.194 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:03:52.116Z,1465689832.116 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:03:52.118Z,1465689832.118 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:04:00.557Z,1465689840.557 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:04:02.580Z,1465689842.580 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:06:02.979Z,1465689962.979 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:06:04.989Z,1465689964.989 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:06:52.926Z,1465690012.926 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:06:52.928Z,1465690012.928 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:08:05.337Z,1465690085.337 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:08:07.355Z,1465690087.355 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:08:52.755Z,1465690132.755 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1354.515625 min 2016-06-12T00:09:18.792Z,1465690158.792 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T00:09:53.765Z,1465690193.765 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:09:53.767Z,1465690193.767 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:10:07.623Z,1465690207.623 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:10:09.636Z,1465690209.636 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:12:09.665Z,1465690329.665 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:12:09.691Z,1465690329.691 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T00:12:54.645Z,1465690374.645 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:12:54.647Z,1465690374.647 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:15:55.703Z,1465690555.703 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:15:55.706Z,1465690555.706 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:18:56.765Z,1465690736.765 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:18:56.767Z,1465690736.767 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:19:13.563Z,1465690753.563 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1364.864583 min 2016-06-12T00:19:36.821Z,1465690776.821 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T00:21:57.854Z,1465690917.854 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:21:57.856Z,1465690917.856 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:22:09.949Z,1465690929.949 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:24:09.996Z,1465691049.996 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:24:14.422Z,1465691054.422 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:24:58.907Z,1465691098.907 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:24:58.909Z,1465691098.909 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:26:14.474Z,1465691174.474 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:26:16.483Z,1465691176.483 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:27:59.851Z,1465691279.851 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:27:59.853Z,1465691279.853 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:28:16.523Z,1465691296.523 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:28:18.545Z,1465691298.545 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:29:41.607Z,1465691381.607 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1375.378255 min 2016-06-12T00:29:56.121Z,1465691396.121 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T00:30:18.588Z,1465691418.588 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:30:20.602Z,1465691420.602 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:31:00.817Z,1465691460.817 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:31:00.819Z,1465691460.819 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:32:20.901Z,1465691540.901 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:32:21.283Z,1465691541.283 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T00:34:01.870Z,1465691641.870 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:34:01.872Z,1465691641.872 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:37:02.864Z,1465691822.864 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:37:02.870Z,1465691822.870 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:40:00.706Z,1465692000.706 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1385.650391 min 2016-06-12T00:40:04.004Z,1465692004.004 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:40:04.006Z,1465692004.006 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:40:14.768Z,1465692014.768 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T00:40:14.865Z,1465692014.865 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T00:42:21.504Z,1465692141.504 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:43:04.860Z,1465692184.860 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:43:04.862Z,1465692184.862 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:44:21.895Z,1465692261.895 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:44:23.905Z,1465692263.905 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:46:05.966Z,1465692365.966 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:46:05.968Z,1465692365.968 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:46:24.209Z,1465692384.209 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:46:26.223Z,1465692386.223 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:48:26.550Z,1465692506.550 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:48:28.561Z,1465692508.561 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:49:07.157Z,1465692547.157 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:49:07.159Z,1465692547.159 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:50:21.736Z,1465692621.736 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1396.000391 min 2016-06-12T00:50:28.940Z,1465692628.940 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:50:30.950Z,1465692630.950 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T00:52:07.958Z,1465692727.958 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:52:07.961Z,1465692727.961 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:52:27.296Z,1465692747.296 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T00:52:30.962Z,1465692750.962 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T00:52:31.351Z,1465692751.351 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T00:55:09.135Z,1465692909.135 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:55:09.137Z,1465692909.137 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:58:10.246Z,1465693090.246 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T00:58:10.283Z,1465693090.283 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:00:42.446Z,1465693242.446 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1406.397266 min 2016-06-12T01:01:11.213Z,1465693271.213 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:01:11.215Z,1465693271.215 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:02:31.556Z,1465693351.556 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:02:45.827Z,1465693365.827 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T01:04:12.085Z,1465693452.085 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:04:12.087Z,1465693452.087 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:04:31.618Z,1465693471.618 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:04:33.633Z,1465693473.633 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:06:34.020Z,1465693594.020 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:06:36.035Z,1465693596.035 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:07:12.942Z,1465693632.942 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:07:12.945Z,1465693632.945 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:08:36.398Z,1465693716.398 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:08:38.409Z,1465693718.409 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:10:14.169Z,1465693814.169 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:10:14.171Z,1465693814.171 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:10:38.728Z,1465693838.728 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:10:40.738Z,1465693840.738 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:11:03.510Z,1465693863.510 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1416.694792 min 2016-06-12T01:12:41.045Z,1465693961.045 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:12:41.354Z,1465693961.354 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T01:13:04.181Z,1465693984.181 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T01:13:15.078Z,1465693995.078 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:13:15.080Z,1465693995.080 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:16:18.788Z,1465694178.788 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:16:18.806Z,1465694178.806 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:19:19.629Z,1465694359.629 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:19:19.631Z,1465694359.631 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:21:24.377Z,1465694484.377 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1427.043620 min 2016-06-12T01:22:20.483Z,1465694540.483 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:22:20.485Z,1465694540.485 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:22:41.695Z,1465694561.695 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:23:26.953Z,1465694606.953 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T01:24:42.091Z,1465694682.091 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:24:44.101Z,1465694684.101 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:25:21.500Z,1465694721.500 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:25:21.502Z,1465694721.502 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:26:44.511Z,1465694804.511 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:26:46.523Z,1465694806.523 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:28:25.221Z,1465694905.221 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:28:25.223Z,1465694905.223 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:28:46.571Z,1465694926.571 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:28:48.601Z,1465694928.601 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:30:48.948Z,1465695048.948 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:30:50.958Z,1465695050.958 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:31:26.038Z,1465695086.038 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:31:26.040Z,1465695086.040 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:31:45.302Z,1465695105.302 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1437.393359 min 2016-06-12T01:32:51.269Z,1465695171.269 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:32:51.584Z,1465695171.584 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T01:33:10.057Z,1465695190.057 [CBIT](IMPORTANT): Beginning GF scan 2016-06-12T01:33:46.003Z,1465695226.003 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T01:33:46.066Z,1465695226.066 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T01:34:27.221Z,1465695267.221 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:34:27.223Z,1465695267.223 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:37:28.317Z,1465695448.317 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:37:28.319Z,1465695448.319 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:40:29.332Z,1465695629.332 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:40:29.334Z,1465695629.334 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:42:03.076Z,1465695723.076 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1447.736198 min 2016-06-12T01:42:51.932Z,1465695771.932 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:43:30.135Z,1465695810.135 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:43:30.137Z,1465695810.137 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:44:51.993Z,1465695891.993 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:44:54.005Z,1465695894.005 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:45:59.993Z,1465695959.993 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T01:46:31.334Z,1465695991.334 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:46:31.336Z,1465695991.336 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:46:54.369Z,1465696014.369 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:46:56.379Z,1465696016.379 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:48:56.690Z,1465696136.690 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:48:58.700Z,1465696138.700 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:49:32.546Z,1465696172.546 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:49:32.548Z,1465696172.548 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:50:58.728Z,1465696258.728 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:51:00.738Z,1465696260.738 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T01:52:19.760Z,1465696339.760 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1458.013411 min 2016-06-12T01:52:33.411Z,1465696353.411 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:52:33.413Z,1465696353.413 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:53:00.741Z,1465696380.741 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T01:53:01.049Z,1465696381.049 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T01:55:34.347Z,1465696534.347 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:55:34.349Z,1465696534.349 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:56:23.540Z,1465696583.540 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T01:58:35.310Z,1465696715.310 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T01:58:35.312Z,1465696715.312 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:01:38.999Z,1465696898.999 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:01:39.001Z,1465696899.001 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:02:39.142Z,1465696959.142 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1468.289323 min 2016-06-12T02:03:01.010Z,1465696981.010 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:04:39.602Z,1465697079.602 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:04:39.604Z,1465697079.604 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:05:01.210Z,1465697101.210 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:05:03.220Z,1465697103.220 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:06:40.653Z,1465697200.653 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T02:07:03.556Z,1465697223.556 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:07:05.566Z,1465697225.566 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:07:40.479Z,1465697260.479 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:07:40.481Z,1465697260.481 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:09:05.861Z,1465697345.861 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:09:07.876Z,1465697347.876 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:10:41.237Z,1465697441.237 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:10:41.239Z,1465697441.239 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:11:08.275Z,1465697468.275 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:11:10.290Z,1465697470.290 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:13:00.450Z,1465697580.450 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1478.645833 min 2016-06-12T02:13:10.645Z,1465697590.645 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:13:11.037Z,1465697591.037 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T02:13:42.174Z,1465697622.174 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:13:42.180Z,1465697622.180 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:16:42.951Z,1465697802.951 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:16:42.953Z,1465697802.953 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:17:00.942Z,1465697820.942 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T02:19:43.862Z,1465697983.862 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:19:43.864Z,1465697983.864 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:22:44.659Z,1465698164.659 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:22:44.662Z,1465698164.662 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:23:10.862Z,1465698190.862 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:23:27.049Z,1465698207.049 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1489.136068 min 2016-06-12T02:25:11.030Z,1465698311.030 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:25:13.040Z,1465698313.040 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:25:45.471Z,1465698345.471 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:25:45.474Z,1465698345.474 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:27:13.384Z,1465698433.384 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:27:15.393Z,1465698435.393 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:27:17.967Z,1465698437.967 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T02:27:18.036Z,1465698438.036 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T02:28:46.295Z,1465698526.295 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:28:46.297Z,1465698526.297 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:29:15.745Z,1465698555.745 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:29:17.755Z,1465698557.755 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:31:17.807Z,1465698677.807 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:31:19.816Z,1465698679.816 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:31:47.176Z,1465698707.176 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:31:47.178Z,1465698707.178 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:33:20.136Z,1465698800.136 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:33:20.153Z,1465698800.153 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T02:33:46.505Z,1465698826.505 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1499.412891 min 2016-06-12T02:34:48.273Z,1465698888.273 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:34:48.276Z,1465698888.276 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:37:49.454Z,1465699069.454 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:37:49.457Z,1465699069.457 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:39:31.032Z,1465699171.032 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T02:40:50.453Z,1465699250.453 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:40:50.455Z,1465699250.455 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:43:20.406Z,1465699400.406 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:43:51.540Z,1465699431.540 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:43:51.546Z,1465699431.546 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:44:04.328Z,1465699444.328 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1509.757031 min 2016-06-12T02:45:20.750Z,1465699520.750 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:45:22.763Z,1465699522.763 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:46:52.342Z,1465699612.342 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:46:52.344Z,1465699612.344 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:47:23.127Z,1465699643.127 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:47:25.137Z,1465699645.137 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:49:25.493Z,1465699765.493 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:49:27.503Z,1465699767.503 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:49:49.053Z,1465699789.053 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T02:49:53.497Z,1465699793.497 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:49:53.500Z,1465699793.500 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:51:27.522Z,1465699887.522 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:51:29.531Z,1465699889.531 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T02:52:54.497Z,1465699974.497 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:52:54.499Z,1465699974.499 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:53:29.876Z,1465700009.876 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T02:53:30.117Z,1465700010.117 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T02:54:24.196Z,1465700064.196 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1520.040365 min 2016-06-12T02:55:55.603Z,1465700155.603 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:55:55.609Z,1465700155.609 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:58:56.775Z,1465700336.775 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T02:58:56.778Z,1465700336.778 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:00:08.101Z,1465700408.101 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T03:01:57.642Z,1465700517.642 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:01:57.644Z,1465700517.644 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:03:30.485Z,1465700610.485 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:04:45.121Z,1465700685.121 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1530.389714 min 2016-06-12T03:04:58.808Z,1465700698.808 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:04:58.810Z,1465700698.810 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:05:30.546Z,1465700730.546 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:05:32.555Z,1465700732.555 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:07:32.895Z,1465700852.895 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:07:34.908Z,1465700854.908 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:07:59.806Z,1465700879.806 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:07:59.808Z,1465700879.808 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:09:35.212Z,1465700975.212 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:09:37.226Z,1465700977.226 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:10:26.208Z,1465701026.208 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T03:11:00.646Z,1465701060.646 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:11:00.652Z,1465701060.652 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:11:37.582Z,1465701097.582 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:11:39.592Z,1465701099.592 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:13:39.944Z,1465701219.944 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:13:40.177Z,1465701220.177 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T03:14:01.750Z,1465701241.750 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:14:01.752Z,1465701241.752 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:15:06.239Z,1465701306.239 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1540.742188 min 2016-06-12T03:17:02.880Z,1465701422.880 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:17:02.897Z,1465701422.897 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:20:07.022Z,1465701607.022 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:20:07.024Z,1465701607.024 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:20:46.053Z,1465701646.053 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T03:20:46.148Z,1465701646.148 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T03:23:07.929Z,1465701787.929 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:23:07.935Z,1465701787.935 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:23:40.246Z,1465701820.246 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:25:32.155Z,1465701932.155 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1551.172917 min 2016-06-12T03:25:40.322Z,1465701940.322 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:25:42.331Z,1465701942.331 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:26:09.013Z,1465701969.013 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:26:09.014Z,1465701969.014 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:27:42.654Z,1465702062.654 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:27:44.669Z,1465702064.669 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:29:09.831Z,1465702149.831 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:29:09.834Z,1465702149.834 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:29:45.016Z,1465702185.016 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:29:47.026Z,1465702187.026 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:31:47.090Z,1465702307.090 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:31:49.099Z,1465702309.099 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:32:10.738Z,1465702330.738 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:32:10.757Z,1465702330.757 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:33:00.852Z,1465702380.852 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T03:33:49.151Z,1465702429.151 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:33:49.307Z,1465702429.307 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T03:35:11.898Z,1465702511.898 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:35:11.900Z,1465702511.900 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:35:53.141Z,1465702553.141 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1561.523828 min 2016-06-12T03:38:13.041Z,1465702693.041 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:38:13.048Z,1465702693.048 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:41:14.163Z,1465702874.163 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:41:14.165Z,1465702874.165 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:43:18.330Z,1465702998.330 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T03:43:49.348Z,1465703029.348 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:44:15.292Z,1465703055.292 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:44:15.294Z,1465703055.294 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:45:49.708Z,1465703149.708 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:45:51.718Z,1465703151.718 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:46:11.100Z,1465703171.100 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1571.869271 min 2016-06-12T03:47:16.282Z,1465703236.282 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:47:16.284Z,1465703236.284 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:47:51.744Z,1465703271.744 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:47:53.755Z,1465703273.755 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:49:53.794Z,1465703393.794 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:49:55.804Z,1465703395.804 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:50:17.189Z,1465703417.189 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:50:17.191Z,1465703417.191 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:51:55.884Z,1465703515.884 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:51:57.897Z,1465703517.897 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T03:53:18.089Z,1465703598.089 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:53:18.091Z,1465703598.091 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:53:35.719Z,1465703615.719 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T03:53:58.257Z,1465703638.257 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T03:53:58.566Z,1465703638.566 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T03:56:19.193Z,1465703779.193 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:56:19.195Z,1465703779.195 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:56:30.874Z,1465703790.874 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1582.151823 min 2016-06-12T03:59:20.019Z,1465703960.019 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T03:59:20.022Z,1465703960.022 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:02:21.202Z,1465704141.202 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:02:21.216Z,1465704141.216 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:03:53.773Z,1465704233.773 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T04:03:58.939Z,1465704238.939 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:05:22.331Z,1465704322.331 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:05:22.333Z,1465704322.333 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:05:58.978Z,1465704358.978 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:06:00.988Z,1465704360.988 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:06:48.887Z,1465704408.887 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1592.499089 min 2016-06-12T04:08:01.300Z,1465704481.300 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:08:03.310Z,1465704483.310 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:08:23.249Z,1465704503.249 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:08:23.251Z,1465704503.251 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:10:03.334Z,1465704603.334 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:10:05.343Z,1465704605.343 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:11:24.077Z,1465704684.077 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:11:24.079Z,1465704684.079 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:12:05.401Z,1465704725.401 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:12:08.222Z,1465704728.222 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:14:08.597Z,1465704848.597 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:14:08.793Z,1465704848.793 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T04:14:11.923Z,1465704851.923 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T04:14:11.956Z,1465704851.956 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T04:14:25.145Z,1465704865.145 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:14:25.147Z,1465704865.147 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:17:08.610Z,1465705028.610 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1602.782292 min 2016-06-12T04:17:26.281Z,1465705046.281 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:17:26.283Z,1465705046.283 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:20:27.486Z,1465705227.486 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:20:27.488Z,1465705227.488 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:23:28.574Z,1465705408.574 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:23:28.577Z,1465705408.577 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:24:08.867Z,1465705448.867 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:26:08.998Z,1465705568.998 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:26:11.016Z,1465705571.016 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:26:25.823Z,1465705585.823 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T04:26:29.449Z,1465705589.449 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:26:29.451Z,1465705589.451 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:27:31.561Z,1465705651.561 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1613.211458 min 2016-06-12T04:28:11.084Z,1465705691.084 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:28:13.102Z,1465705693.102 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:29:30.332Z,1465705770.332 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:29:30.334Z,1465705770.334 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:30:13.353Z,1465705813.353 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:30:15.364Z,1465705815.364 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:32:15.746Z,1465705935.746 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:32:17.757Z,1465705937.757 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:32:31.234Z,1465705951.234 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:32:31.237Z,1465705951.237 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:34:18.048Z,1465706058.048 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:34:18.369Z,1465706058.369 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T04:35:32.414Z,1465706132.414 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:35:32.416Z,1465706132.416 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:36:44.068Z,1465706204.068 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T04:37:51.007Z,1465706271.007 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1623.488411 min 2016-06-12T04:38:33.485Z,1465706313.485 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:38:33.487Z,1465706313.487 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:41:34.658Z,1465706494.658 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:41:34.665Z,1465706494.665 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:44:18.679Z,1465706658.679 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:44:35.593Z,1465706675.593 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:44:35.595Z,1465706675.595 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:46:18.702Z,1465706778.702 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:46:21.140Z,1465706781.140 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:47:02.676Z,1465706822.676 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T04:47:36.464Z,1465706856.464 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:47:36.466Z,1465706856.466 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:48:11.733Z,1465706891.733 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1633.880469 min 2016-06-12T04:48:21.452Z,1465706901.452 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:48:23.479Z,1465706903.479 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:50:23.697Z,1465707023.697 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:50:25.708Z,1465707025.708 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:50:37.433Z,1465707037.433 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:50:37.435Z,1465707037.435 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:52:25.731Z,1465707145.731 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:52:27.761Z,1465707147.761 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T04:53:38.433Z,1465707218.433 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:53:38.435Z,1465707218.435 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:54:28.153Z,1465707268.153 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T04:54:28.450Z,1465707268.450 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T04:56:39.249Z,1465707399.249 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:56:39.251Z,1465707399.251 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:57:22.010Z,1465707442.010 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T04:58:38.142Z,1465707518.142 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1644.274609 min 2016-06-12T04:59:40.385Z,1465707580.385 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T04:59:40.387Z,1465707580.387 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:02:41.461Z,1465707761.461 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:02:41.463Z,1465707761.463 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:02:41.475Z,1465707761.475 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-06-12T05:02:41.488Z,1465707761.488 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-06-12T05:04:28.827Z,1465707868.827 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:06:29.182Z,1465707989.182 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:06:31.193Z,1465707991.193 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:07:40.820Z,1465708060.820 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T05:07:40.852Z,1465708060.852 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T05:08:31.524Z,1465708111.524 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:08:33.535Z,1465708113.535 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:08:56.220Z,1465708136.220 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1654.621745 min 2016-06-12T05:10:33.902Z,1465708233.902 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:10:35.912Z,1465708235.912 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:12:36.244Z,1465708356.244 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:12:38.254Z,1465708358.254 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:14:38.308Z,1465708478.308 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:14:38.377Z,1465708478.377 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T05:19:15.500Z,1465708755.500 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1664.895833 min 2016-06-12T05:19:54.736Z,1465708794.736 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T05:20:42.568Z,1465708842.568 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:20:42.570Z,1465708842.570 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:23:43.389Z,1465709023.389 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:23:43.390Z,1465709023.390 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:24:38.566Z,1465709078.566 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:26:38.696Z,1465709198.696 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:26:41.109Z,1465709201.109 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:26:44.319Z,1465709204.319 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:26:44.326Z,1465709204.326 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:28:41.476Z,1465709321.476 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:28:43.486Z,1465709323.486 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:29:33.870Z,1465709373.870 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1675.249479 min 2016-06-12T05:29:45.126Z,1465709385.126 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:29:45.128Z,1465709385.128 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:30:13.090Z,1465709413.090 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T05:30:43.862Z,1465709443.862 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:30:45.872Z,1465709445.872 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:32:46.183Z,1465709566.183 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:32:46.186Z,1465709566.186 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:32:46.208Z,1465709566.208 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:32:48.218Z,1465709568.218 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:34:48.549Z,1465709688.549 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:34:48.835Z,1465709688.835 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T05:35:46.956Z,1465709746.956 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:35:46.958Z,1465709746.958 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:38:47.748Z,1465709927.748 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:38:47.750Z,1465709927.750 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:39:53.871Z,1465709993.871 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1685.535417 min 2016-06-12T05:40:30.303Z,1465710030.303 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T05:41:48.890Z,1465710108.890 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:41:48.892Z,1465710108.892 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:44:49.215Z,1465710289.215 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:44:50.073Z,1465710290.073 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:44:50.075Z,1465710290.075 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:46:49.504Z,1465710409.504 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:46:51.513Z,1465710411.513 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:47:51.213Z,1465710471.213 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:47:51.215Z,1465710471.215 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:48:51.849Z,1465710531.849 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:48:53.867Z,1465710533.867 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:50:12.882Z,1465710612.882 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1695.899609 min 2016-06-12T05:50:49.051Z,1465710649.051 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T05:50:52.272Z,1465710652.272 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:50:52.274Z,1465710652.274 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:50:54.246Z,1465710654.246 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:50:56.260Z,1465710656.260 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:52:56.665Z,1465710776.665 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:52:58.675Z,1465710778.675 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T05:53:53.329Z,1465710833.329 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:53:53.331Z,1465710833.331 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:54:58.778Z,1465710898.778 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T05:54:59.106Z,1465710899.106 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T05:56:54.481Z,1465711014.481 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:56:54.483Z,1465711014.483 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:59:55.675Z,1465711195.675 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T05:59:55.677Z,1465711195.677 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:00:32.477Z,1465711232.477 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1706.180208 min 2016-06-12T06:01:06.500Z,1465711266.500 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T06:01:06.555Z,1465711266.555 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T06:02:56.755Z,1465711376.755 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:02:56.774Z,1465711376.774 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:04:59.019Z,1465711499.019 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:05:57.783Z,1465711557.783 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:05:57.785Z,1465711557.785 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:06:59.391Z,1465711619.391 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:07:01.400Z,1465711621.400 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:08:58.416Z,1465711738.416 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:08:58.418Z,1465711738.418 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:09:01.736Z,1465711741.736 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:09:03.746Z,1465711743.746 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:10:55.460Z,1465711855.460 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1716.609245 min 2016-06-12T06:11:04.146Z,1465711864.146 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:11:06.161Z,1465711866.161 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:11:58.920Z,1465711918.920 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:11:58.922Z,1465711918.922 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:13:06.440Z,1465711986.440 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:13:08.450Z,1465711988.450 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:13:20.380Z,1465712000.380 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T06:14:59.442Z,1465712099.442 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:14:59.444Z,1465712099.444 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:15:08.561Z,1465712108.561 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:15:08.722Z,1465712108.722 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T06:18:00.181Z,1465712280.181 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:18:00.183Z,1465712280.183 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:21:01.159Z,1465712461.159 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:21:01.161Z,1465712461.161 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:21:11.982Z,1465712471.982 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1726.884115 min 2016-06-12T06:23:39.954Z,1465712619.954 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T06:24:02.027Z,1465712642.027 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:24:02.029Z,1465712642.029 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:25:08.803Z,1465712708.803 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:27:03.150Z,1465712823.150 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:27:03.152Z,1465712823.152 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:27:08.883Z,1465712828.883 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:27:10.892Z,1465712830.892 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:29:11.236Z,1465712951.236 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:29:13.246Z,1465712953.246 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:30:04.078Z,1465713004.078 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:30:04.081Z,1465713004.081 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:31:13.645Z,1465713073.645 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:31:15.655Z,1465713075.655 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:31:28.724Z,1465713088.724 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1737.163021 min 2016-06-12T06:33:05.090Z,1465713185.090 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:33:05.117Z,1465713185.117 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:33:16.003Z,1465713196.003 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:33:18.026Z,1465713198.026 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:33:57.980Z,1465713237.980 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T06:35:18.269Z,1465713318.269 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:35:18.621Z,1465713318.621 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T06:36:05.966Z,1465713365.966 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:36:05.968Z,1465713365.968 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:39:07.135Z,1465713547.135 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:39:07.137Z,1465713547.137 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:41:48.155Z,1465713708.155 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1747.440885 min 2016-06-12T06:42:08.244Z,1465713728.244 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:42:08.246Z,1465713728.246 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:44:16.836Z,1465713856.836 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T06:45:09.479Z,1465713909.479 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:45:09.481Z,1465713909.481 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:45:18.943Z,1465713918.943 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:47:18.968Z,1465714038.968 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:47:20.976Z,1465714040.976 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:48:11.824Z,1465714091.824 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:48:11.825Z,1465714091.825 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:49:20.988Z,1465714160.988 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:49:22.997Z,1465714162.997 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:51:12.546Z,1465714272.546 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:51:12.548Z,1465714272.548 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:51:23.334Z,1465714283.334 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:51:25.351Z,1465714285.351 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:52:06.553Z,1465714326.553 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1757.794010 min 2016-06-12T06:53:25.367Z,1465714405.367 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:53:27.376Z,1465714407.376 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T06:54:13.555Z,1465714453.555 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:54:13.573Z,1465714453.573 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:54:34.726Z,1465714474.726 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T06:54:34.801Z,1465714474.801 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T06:55:27.748Z,1465714527.748 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T06:55:28.154Z,1465714528.154 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T06:57:15.634Z,1465714635.634 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T06:57:15.636Z,1465714635.636 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:00:16.164Z,1465714816.164 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:00:16.166Z,1465714816.166 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:02:31.170Z,1465714951.170 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1768.157812 min 2016-06-12T07:03:17.344Z,1465714997.344 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:03:17.346Z,1465714997.346 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:05:27.978Z,1465715127.978 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:06:18.117Z,1465715178.117 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:06:18.119Z,1465715178.119 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:06:48.668Z,1465715208.668 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T07:07:28.053Z,1465715248.053 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:07:32.066Z,1465715252.066 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:09:19.184Z,1465715359.184 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:09:19.186Z,1465715359.186 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:09:32.117Z,1465715372.117 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:09:34.127Z,1465715374.127 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:11:34.490Z,1465715494.490 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:11:36.501Z,1465715496.501 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:12:20.047Z,1465715540.047 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:12:20.053Z,1465715540.053 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:12:57.719Z,1465715577.719 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1778.598828 min 2016-06-12T07:13:36.504Z,1465715616.504 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:13:38.514Z,1465715618.514 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:15:20.978Z,1465715720.978 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:15:20.980Z,1465715720.980 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:15:38.552Z,1465715738.552 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:15:38.643Z,1465715738.643 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T07:17:07.994Z,1465715827.994 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T07:18:27.967Z,1465715907.967 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:18:27.969Z,1465715907.969 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:21:28.765Z,1465716088.765 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:21:28.767Z,1465716088.767 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:23:25.254Z,1465716205.254 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1789.059115 min 2016-06-12T07:24:29.848Z,1465716269.848 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:24:29.850Z,1465716269.850 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:25:39.156Z,1465716339.156 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:27:25.725Z,1465716445.725 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T07:27:30.676Z,1465716450.676 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:27:30.678Z,1465716450.678 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:27:39.237Z,1465716459.237 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:27:41.253Z,1465716461.253 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:29:41.568Z,1465716581.568 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:29:43.586Z,1465716583.586 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:30:31.715Z,1465716631.715 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:30:31.717Z,1465716631.717 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:31:43.958Z,1465716703.958 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:31:45.972Z,1465716705.972 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:33:32.867Z,1465716812.867 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:33:32.873Z,1465716812.873 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:33:36.444Z,1465716816.444 [CBIT](IMPORTANT): Beginning GF scan 2016-06-12T07:33:45.998Z,1465716825.998 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:33:48.017Z,1465716828.017 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:33:51.638Z,1465716831.638 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1799.499479 min 2016-06-12T07:35:48.104Z,1465716948.104 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:35:48.269Z,1465716948.269 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T07:36:33.654Z,1465716993.654 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:36:33.656Z,1465716993.656 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:37:43.328Z,1465717063.328 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T07:39:34.773Z,1465717174.773 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:39:34.776Z,1465717174.776 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:42:35.849Z,1465717355.849 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:42:35.851Z,1465717355.851 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:44:12.470Z,1465717452.470 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1809.845573 min 2016-06-12T07:45:36.720Z,1465717536.720 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:45:36.722Z,1465717536.722 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:45:48.342Z,1465717548.342 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:47:48.366Z,1465717668.366 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:47:50.375Z,1465717670.375 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:48:00.925Z,1465717680.925 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T07:48:00.986Z,1465717680.986 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T07:48:37.872Z,1465717717.872 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:48:37.874Z,1465717717.874 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:49:50.423Z,1465717790.423 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:49:52.432Z,1465717792.432 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:51:38.718Z,1465717898.718 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:51:38.720Z,1465717898.720 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:51:52.820Z,1465717912.820 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:51:54.830Z,1465717914.830 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:53:55.174Z,1465718035.174 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:53:57.184Z,1465718037.184 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T07:54:30.627Z,1465718070.627 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1820.195312 min 2016-06-12T07:54:39.583Z,1465718079.583 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:54:39.585Z,1465718079.585 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:55:57.548Z,1465718157.548 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T07:55:57.703Z,1465718157.703 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T07:57:40.734Z,1465718260.734 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T07:57:40.736Z,1465718260.736 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:00:13.244Z,1465718413.244 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T08:00:41.657Z,1465718441.657 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:00:41.676Z,1465718441.676 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:03:42.810Z,1465718622.810 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:03:42.812Z,1465718622.812 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:04:46.955Z,1465718686.955 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1830.467578 min 2016-06-12T08:05:58.150Z,1465718758.150 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:06:43.878Z,1465718803.878 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:06:43.880Z,1465718803.880 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:07:58.184Z,1465718878.184 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:08:00.195Z,1465718880.195 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:09:44.720Z,1465718984.720 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:09:44.738Z,1465718984.738 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:10:00.269Z,1465719000.269 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:10:02.281Z,1465719002.281 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:10:32.765Z,1465719032.765 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T08:12:02.336Z,1465719122.336 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:12:06.348Z,1465719126.348 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:12:45.524Z,1465719165.524 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:12:45.526Z,1465719165.526 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:14:06.740Z,1465719246.740 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:14:08.751Z,1465719248.751 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:15:03.480Z,1465719303.480 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1840.743229 min 2016-06-12T08:15:46.411Z,1465719346.411 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:15:46.413Z,1465719346.413 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:16:09.122Z,1465719369.122 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:16:09.333Z,1465719369.333 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T08:18:47.484Z,1465719527.484 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:18:47.486Z,1465719527.486 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:20:51.667Z,1465719651.667 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T08:21:48.583Z,1465719708.583 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:21:48.585Z,1465719708.585 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:24:49.572Z,1465719889.572 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:24:49.574Z,1465719889.574 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:25:19.626Z,1465719919.626 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1851.011589 min 2016-06-12T08:26:09.328Z,1465719969.328 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:27:50.749Z,1465720070.749 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:27:50.751Z,1465720070.751 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:28:09.696Z,1465720089.696 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:28:11.714Z,1465720091.714 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:30:11.958Z,1465720211.958 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:30:13.971Z,1465720213.971 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:30:51.866Z,1465720251.866 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:30:51.868Z,1465720251.868 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:31:09.037Z,1465720269.037 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T08:32:14.031Z,1465720334.031 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:32:16.040Z,1465720336.040 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:33:53.024Z,1465720433.024 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:33:53.031Z,1465720433.031 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:34:16.389Z,1465720456.389 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:34:18.406Z,1465720458.406 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:35:39.171Z,1465720539.171 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1861.290365 min 2016-06-12T08:36:18.453Z,1465720578.453 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:36:18.458Z,1465720578.458 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T08:36:54.091Z,1465720614.091 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:36:54.093Z,1465720614.093 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:39:55.144Z,1465720795.144 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:39:55.146Z,1465720795.146 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:41:28.795Z,1465720888.795 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T08:41:28.827Z,1465720888.827 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T08:42:56.151Z,1465720976.151 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:42:56.153Z,1465720976.153 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:45:56.800Z,1465721156.800 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1871.631510 min 2016-06-12T08:46:00.054Z,1465721160.054 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:46:00.056Z,1465721160.056 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:46:18.682Z,1465721178.682 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:48:19.046Z,1465721299.046 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:48:21.069Z,1465721301.069 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:49:00.639Z,1465721340.639 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:49:00.641Z,1465721340.641 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:50:21.376Z,1465721421.376 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:50:23.386Z,1465721423.386 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:52:01.775Z,1465721521.775 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:52:01.777Z,1465721521.777 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:52:23.777Z,1465721543.777 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:52:25.792Z,1465721545.792 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:53:42.592Z,1465721622.592 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T08:54:26.155Z,1465721666.155 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:54:28.165Z,1465721668.165 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T08:55:02.756Z,1465721702.756 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:55:02.758Z,1465721702.758 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:56:13.351Z,1465721773.351 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1881.906641 min 2016-06-12T08:56:28.193Z,1465721788.193 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T08:56:28.222Z,1465721788.222 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T08:58:03.870Z,1465721883.870 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T08:58:03.872Z,1465721883.872 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:01:04.995Z,1465722064.995 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:01:04.997Z,1465722064.997 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:04:01.969Z,1465722241.969 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T09:04:05.990Z,1465722245.990 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:04:05.992Z,1465722245.992 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:06:28.394Z,1465722388.394 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:06:29.456Z,1465722389.456 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1892.175521 min 2016-06-12T09:07:07.063Z,1465722427.063 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:07:07.066Z,1465722427.066 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:08:28.480Z,1465722508.480 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:08:32.903Z,1465722512.903 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:10:07.888Z,1465722607.888 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:10:07.890Z,1465722607.890 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:10:32.966Z,1465722632.966 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:10:34.976Z,1465722634.976 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:12:35.280Z,1465722755.280 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:12:37.294Z,1465722757.294 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:13:08.920Z,1465722788.920 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:13:08.922Z,1465722788.922 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:14:20.586Z,1465722860.586 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T09:14:37.670Z,1465722877.670 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:14:39.680Z,1465722879.680 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:16:09.722Z,1465722969.722 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:16:09.724Z,1465722969.724 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:16:39.742Z,1465722999.742 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:16:40.130Z,1465723000.130 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T09:16:50.939Z,1465723010.939 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1902.533724 min 2016-06-12T09:19:10.857Z,1465723150.857 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:19:10.859Z,1465723150.859 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:22:14.369Z,1465723334.369 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:22:14.371Z,1465723334.371 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:24:38.297Z,1465723478.297 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T09:25:14.915Z,1465723514.915 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:25:14.918Z,1465723514.918 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:26:39.000Z,1465723600.000 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:27:15.051Z,1465723635.051 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1912.888542 min 2016-06-12T09:28:18.469Z,1465723698.469 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:28:18.471Z,1465723698.471 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:28:40.025Z,1465723720.025 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:28:42.034Z,1465723722.034 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:30:42.109Z,1465723842.109 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:30:44.123Z,1465723844.123 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:31:19.098Z,1465723879.098 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:31:19.117Z,1465723879.117 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:32:44.495Z,1465723964.495 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:32:46.509Z,1465723966.509 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:34:20.081Z,1465724060.081 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:34:20.083Z,1465724060.083 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:34:46.886Z,1465724086.886 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:34:48.894Z,1465724088.894 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:34:56.592Z,1465724096.592 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T09:34:56.680Z,1465724096.680 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T09:36:48.950Z,1465724208.950 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:36:49.306Z,1465724209.306 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T09:37:21.290Z,1465724241.290 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:37:21.292Z,1465724241.292 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:37:38.565Z,1465724258.565 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1923.326302 min 2016-06-12T09:40:22.426Z,1465724422.426 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:40:22.428Z,1465724422.428 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:43:23.561Z,1465724603.561 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:43:23.563Z,1465724603.563 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:46:24.658Z,1465724784.658 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:46:24.660Z,1465724784.660 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:46:49.183Z,1465724809.183 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:47:10.794Z,1465724830.794 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T09:47:54.845Z,1465724874.845 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1933.598958 min 2016-06-12T09:48:49.531Z,1465724929.531 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:48:51.541Z,1465724931.541 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:49:25.524Z,1465724965.524 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:49:25.526Z,1465724965.526 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:50:51.636Z,1465725051.636 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:50:53.646Z,1465725053.646 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:52:26.390Z,1465725146.390 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:52:26.392Z,1465725146.392 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:52:53.721Z,1465725173.721 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:52:55.731Z,1465725175.731 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:54:55.779Z,1465725295.779 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:54:57.788Z,1465725297.788 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T09:55:27.531Z,1465725327.531 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:55:27.534Z,1465725327.534 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:56:58.121Z,1465725418.121 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T09:56:58.499Z,1465725418.499 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T09:57:28.988Z,1465725448.988 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T09:58:16.279Z,1465725496.279 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1943.955859 min 2016-06-12T09:58:28.505Z,1465725508.505 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T09:58:28.507Z,1465725508.507 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:01:29.308Z,1465725689.308 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:01:29.310Z,1465725689.310 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:04:30.346Z,1465725870.346 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:04:30.373Z,1465725870.373 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:06:58.763Z,1465726018.763 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:07:31.206Z,1465726051.206 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:07:31.208Z,1465726051.208 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:07:48.930Z,1465726068.930 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T10:08:40.591Z,1465726120.591 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1954.360937 min 2016-06-12T10:08:59.101Z,1465726139.101 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:09:01.112Z,1465726141.112 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:10:32.093Z,1465726232.093 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:10:32.095Z,1465726232.095 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:11:01.500Z,1465726261.500 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:11:03.511Z,1465726263.511 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:13:03.853Z,1465726383.853 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:13:05.871Z,1465726385.871 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:13:32.929Z,1465726412.929 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:13:32.931Z,1465726412.931 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:15:06.135Z,1465726506.135 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:15:08.145Z,1465726508.145 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:16:33.819Z,1465726593.819 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:16:33.822Z,1465726593.822 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:17:08.472Z,1465726628.472 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:17:08.734Z,1465726628.734 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T10:18:07.560Z,1465726687.560 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T10:19:05.206Z,1465726745.206 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1964.725000 min 2016-06-12T10:19:34.886Z,1465726774.886 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:19:34.888Z,1465726774.888 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:19:34.900Z,1465726774.900 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-06-12T10:19:34.901Z,1465726774.901 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-06-12T10:27:08.702Z,1465727228.702 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:28:26.680Z,1465727306.680 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T10:28:26.774Z,1465727306.774 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T10:29:08.722Z,1465727348.722 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:29:10.735Z,1465727350.735 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:29:31.238Z,1465727371.238 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1975.157812 min 2016-06-12T10:31:11.139Z,1465727471.139 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:31:13.150Z,1465727473.150 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:33:13.418Z,1465727593.418 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:33:15.427Z,1465727595.427 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:35:15.550Z,1465727715.550 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:35:17.560Z,1465727717.560 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:37:17.928Z,1465727837.928 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:37:17.976Z,1465727837.976 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T10:37:37.142Z,1465727857.142 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:37:37.144Z,1465727857.144 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:39:52.684Z,1465727992.684 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1985.514844 min 2016-06-12T10:40:38.351Z,1465728038.351 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:40:38.357Z,1465728038.357 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:40:39.918Z,1465728039.918 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T10:43:39.242Z,1465728219.242 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:43:39.244Z,1465728219.244 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:46:40.069Z,1465728400.069 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:46:40.099Z,1465728400.099 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:47:18.558Z,1465728438.558 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:49:18.617Z,1465728558.617 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:49:20.628Z,1465728560.628 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:49:41.219Z,1465728581.219 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:49:41.221Z,1465728581.221 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:50:15.624Z,1465728615.624 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1995.945833 min 2016-06-12T10:50:58.897Z,1465728658.897 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T10:51:20.983Z,1465728680.983 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:51:22.997Z,1465728682.997 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:52:42.432Z,1465728762.432 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:52:42.434Z,1465728762.434 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:53:23.084Z,1465728803.084 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:53:25.094Z,1465728805.094 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:55:25.400Z,1465728925.400 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:55:30.220Z,1465728930.220 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T10:55:43.422Z,1465728943.422 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:55:43.456Z,1465728943.456 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:57:30.252Z,1465729050.252 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T10:57:30.368Z,1465729050.368 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T10:58:44.529Z,1465729124.529 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T10:58:44.531Z,1465729124.531 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:00:40.723Z,1465729240.723 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2006.316016 min 2016-06-12T11:01:18.389Z,1465729278.389 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T11:01:45.372Z,1465729305.372 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:01:45.374Z,1465729305.374 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:04:46.473Z,1465729486.473 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:04:46.475Z,1465729486.475 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:07:30.873Z,1465729650.873 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:07:47.601Z,1465729667.601 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:07:47.620Z,1465729667.620 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:09:31.269Z,1465729771.269 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:09:33.280Z,1465729773.280 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:10:48.602Z,1465729848.602 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:10:48.621Z,1465729848.621 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:10:58.644Z,1465729858.644 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2016.661589 min 2016-06-12T11:11:33.633Z,1465729893.633 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:11:35.649Z,1465729895.649 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:11:37.950Z,1465729897.950 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T11:13:35.948Z,1465730015.948 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:13:37.958Z,1465730017.958 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:13:49.512Z,1465730029.512 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:13:49.514Z,1465730029.514 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:15:38.327Z,1465730138.327 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:15:40.337Z,1465730140.337 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:16:50.511Z,1465730210.511 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:16:50.513Z,1465730210.513 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:17:40.676Z,1465730260.676 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:17:40.681Z,1465730260.681 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T11:19:51.604Z,1465730391.604 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:19:51.606Z,1465730391.606 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:21:15.796Z,1465730475.796 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2026.947526 min 2016-06-12T11:21:56.674Z,1465730516.674 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T11:21:56.734Z,1465730516.734 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T11:22:52.846Z,1465730572.846 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:22:52.848Z,1465730572.848 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:25:53.725Z,1465730753.725 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:25:53.743Z,1465730753.743 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:27:41.323Z,1465730861.323 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:28:54.702Z,1465730934.702 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:28:54.705Z,1465730934.705 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:29:41.374Z,1465730981.374 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:29:43.383Z,1465730983.383 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:31:40.324Z,1465731100.324 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2037.309766 min 2016-06-12T11:31:43.731Z,1465731103.731 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:31:45.741Z,1465731105.741 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:31:55.618Z,1465731115.618 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:31:55.622Z,1465731115.622 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:33:46.056Z,1465731226.056 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:33:48.067Z,1465731228.067 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:34:10.251Z,1465731250.251 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T11:34:56.559Z,1465731296.559 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:34:56.561Z,1465731296.561 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:35:48.442Z,1465731348.442 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:35:50.453Z,1465731350.453 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:37:50.776Z,1465731470.776 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:37:51.013Z,1465731471.013 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T11:37:57.415Z,1465731477.415 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:37:57.418Z,1465731477.418 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:41:01.465Z,1465731661.465 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:41:01.467Z,1465731661.467 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:42:01.657Z,1465731721.657 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2047.663932 min 2016-06-12T11:44:02.016Z,1465731842.016 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:44:02.023Z,1465731842.023 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:44:28.754Z,1465731868.754 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T11:47:03.088Z,1465732023.088 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:47:03.090Z,1465732023.090 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:47:51.050Z,1465732071.050 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:49:51.441Z,1465732191.441 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:49:53.452Z,1465732193.452 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:50:04.010Z,1465732204.010 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:50:04.012Z,1465732204.012 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:51:53.455Z,1465732313.455 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:51:55.465Z,1465732315.465 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:52:19.903Z,1465732339.903 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2058.016797 min 2016-06-12T11:53:04.910Z,1465732384.910 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:53:04.912Z,1465732384.912 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:53:55.860Z,1465732435.860 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:53:57.874Z,1465732437.874 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:54:47.433Z,1465732487.433 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T11:55:58.254Z,1465732558.254 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:56:00.264Z,1465732560.264 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T11:56:06.054Z,1465732566.054 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:56:06.057Z,1465732566.057 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:58:00.580Z,1465732680.580 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T11:58:00.803Z,1465732680.803 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T11:59:06.964Z,1465732746.964 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T11:59:06.966Z,1465732746.966 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:02:08.103Z,1465732928.103 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:02:08.105Z,1465732928.105 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:02:44.541Z,1465732964.541 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2068.380469 min 2016-06-12T12:05:05.203Z,1465733105.203 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T12:05:09.225Z,1465733109.225 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:05:09.227Z,1465733109.227 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:08:01.182Z,1465733281.182 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:08:17.336Z,1465733297.336 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:08:17.338Z,1465733297.338 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:10:01.550Z,1465733401.550 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:10:03.563Z,1465733403.563 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:11:18.008Z,1465733478.008 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:11:18.010Z,1465733478.010 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:12:03.614Z,1465733523.614 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:12:05.625Z,1465733525.625 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:13:08.091Z,1465733588.091 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2078.819922 min 2016-06-12T12:14:05.676Z,1465733645.676 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:14:07.690Z,1465733647.690 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:14:18.854Z,1465733658.854 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:14:18.857Z,1465733658.857 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:15:23.029Z,1465733723.029 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T12:15:23.095Z,1465733723.095 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T12:16:07.773Z,1465733767.773 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:16:12.187Z,1465733772.187 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:17:19.693Z,1465733839.693 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:17:19.695Z,1465733839.695 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:18:12.559Z,1465733892.559 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:18:16.241Z,1465733896.241 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T12:20:20.751Z,1465734020.751 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:20:20.754Z,1465734020.754 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:23:21.611Z,1465734201.611 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:23:21.613Z,1465734201.613 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:23:38.802Z,1465734218.802 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2089.284115 min 2016-06-12T12:26:22.716Z,1465734382.716 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:26:22.718Z,1465734382.718 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:27:39.746Z,1465734459.746 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T12:28:12.805Z,1465734492.805 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:29:23.907Z,1465734563.907 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:29:23.909Z,1465734563.909 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:30:13.100Z,1465734613.100 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:30:15.114Z,1465734615.114 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:32:15.141Z,1465734735.141 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:32:17.152Z,1465734737.152 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:32:24.819Z,1465734744.819 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:32:24.822Z,1465734744.822 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:34:01.994Z,1465734841.994 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2099.717448 min 2016-06-12T12:34:17.186Z,1465734857.186 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:34:19.197Z,1465734859.197 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:35:25.948Z,1465734925.948 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:35:25.950Z,1465734925.950 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:36:19.560Z,1465734979.560 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:36:21.579Z,1465734981.579 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:37:58.610Z,1465735078.610 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T12:38:21.594Z,1465735101.594 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:38:21.674Z,1465735101.674 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T12:38:26.817Z,1465735106.817 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:38:26.819Z,1465735106.819 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:41:27.667Z,1465735287.667 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:41:27.669Z,1465735287.669 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:44:23.347Z,1465735463.347 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2110.074870 min 2016-06-12T12:44:28.644Z,1465735468.644 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:44:28.646Z,1465735468.646 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:47:29.795Z,1465735649.795 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:47:29.797Z,1465735649.797 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:48:19.365Z,1465735699.365 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T12:48:22.223Z,1465735702.223 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:50:22.476Z,1465735822.476 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:50:24.485Z,1465735824.485 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:50:31.029Z,1465735831.029 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:50:31.032Z,1465735831.032 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:52:24.504Z,1465735944.504 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:52:26.514Z,1465735946.514 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:53:31.978Z,1465736011.978 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:53:31.996Z,1465736011.996 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:54:26.525Z,1465736066.525 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:54:28.536Z,1465736068.536 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:54:44.907Z,1465736084.907 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2120.433333 min 2016-06-12T12:56:28.915Z,1465736188.915 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:56:30.929Z,1465736190.929 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T12:56:33.179Z,1465736193.179 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:56:33.181Z,1465736193.181 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:58:31.274Z,1465736311.274 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T12:58:31.432Z,1465736311.432 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T12:58:43.746Z,1465736323.746 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T12:59:34.287Z,1465736374.287 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T12:59:34.289Z,1465736374.289 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:02:35.147Z,1465736555.147 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:02:35.150Z,1465736555.150 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:05:08.975Z,1465736708.975 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2130.786458 min 2016-06-12T13:05:36.232Z,1465736736.232 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:05:36.234Z,1465736736.234 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:08:31.863Z,1465736911.863 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:08:37.151Z,1465736917.151 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:08:37.153Z,1465736917.153 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:09:02.292Z,1465736942.292 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T13:09:02.344Z,1465736942.344 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T13:10:31.919Z,1465737031.919 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:10:34.729Z,1465737034.729 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:11:38.150Z,1465737098.150 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:11:38.152Z,1465737098.152 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:12:34.749Z,1465737154.749 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:12:36.767Z,1465737156.767 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:14:37.130Z,1465737277.130 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:14:38.970Z,1465737278.970 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:14:38.972Z,1465737278.972 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:14:39.144Z,1465737279.144 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:15:32.179Z,1465737332.179 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2141.221745 min 2016-06-12T13:16:39.487Z,1465737399.487 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:16:41.498Z,1465737401.498 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:17:39.797Z,1465737459.797 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:17:39.799Z,1465737459.799 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:18:41.882Z,1465737521.882 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:18:41.995Z,1465737521.995 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T13:20:41.024Z,1465737641.024 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:20:41.026Z,1465737641.026 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:21:16.565Z,1465737676.565 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T13:23:41.540Z,1465737821.540 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:23:41.542Z,1465737821.542 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:25:56.509Z,1465737956.509 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2151.579557 min 2016-06-12T13:26:42.569Z,1465738002.569 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:26:42.571Z,1465738002.571 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:28:42.108Z,1465738122.108 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:29:43.770Z,1465738183.770 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:29:43.772Z,1465738183.772 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:30:42.163Z,1465738242.163 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:30:44.172Z,1465738244.172 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:31:34.713Z,1465738294.713 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T13:32:44.572Z,1465738364.572 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:32:44.904Z,1465738364.904 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:32:44.906Z,1465738364.906 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:32:46.587Z,1465738366.587 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:34:03.342Z,1465738443.342 [CBIT](IMPORTANT): Beginning GF scan 2016-06-12T13:34:46.926Z,1465738486.926 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:34:48.936Z,1465738488.936 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:35:45.989Z,1465738545.989 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:35:45.991Z,1465738545.991 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:36:19.660Z,1465738579.660 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2162.011849 min 2016-06-12T13:36:48.995Z,1465738608.995 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:36:51.009Z,1465738611.009 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:38:47.028Z,1465738727.028 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:38:47.030Z,1465738727.030 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:38:51.341Z,1465738731.341 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:38:51.442Z,1465738731.442 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T13:41:48.240Z,1465738908.240 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:41:48.246Z,1465738908.246 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:41:52.585Z,1465738912.585 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T13:44:49.341Z,1465739089.341 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:44:49.343Z,1465739089.343 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:46:41.073Z,1465739201.073 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2172.368750 min 2016-06-12T13:47:50.477Z,1465739270.477 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:47:50.480Z,1465739270.480 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:48:51.514Z,1465739331.514 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:50:51.638Z,1465739451.638 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:50:51.640Z,1465739451.640 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:50:51.846Z,1465739451.846 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:50:53.856Z,1465739453.856 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:52:10.340Z,1465739530.340 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T13:52:54.252Z,1465739574.252 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:52:56.262Z,1465739576.262 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:53:52.550Z,1465739632.550 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:53:52.556Z,1465739632.556 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:54:56.341Z,1465739696.341 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:54:57.550Z,1465739697.550 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2016-06-12T13:54:58.355Z,1465739698.355 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:56:53.516Z,1465739813.516 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:56:53.534Z,1465739813.534 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:56:58.698Z,1465739818.698 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:57:00.713Z,1465739820.713 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T13:57:02.737Z,1465739822.737 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2182.731120 min 2016-06-12T13:59:00.784Z,1465739940.784 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T13:59:01.088Z,1465739941.088 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T13:59:54.379Z,1465739994.379 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T13:59:54.381Z,1465739994.381 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:02:29.079Z,1465740149.079 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T14:02:29.157Z,1465740149.157 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-12T14:02:55.502Z,1465740175.502 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:02:55.504Z,1465740175.504 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:05:56.514Z,1465740356.514 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:05:56.516Z,1465740356.516 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:07:24.205Z,1465740444.205 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2193.087760 min 2016-06-12T14:08:57.390Z,1465740537.390 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:08:57.392Z,1465740537.392 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:09:01.402Z,1465740541.402 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T14:11:01.429Z,1465740661.429 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T14:11:03.439Z,1465740663.439 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T14:11:58.270Z,1465740718.270 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:11:58.272Z,1465740718.272 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:13:03.767Z,1465740783.767 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T14:13:05.777Z,1465740785.777 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T14:14:42.560Z,1465740882.560 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T14:14:59.133Z,1465740899.133 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:14:59.135Z,1465740899.135 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:15:06.113Z,1465740906.113 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T14:15:08.127Z,1465740908.127 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T14:17:08.438Z,1465741028.438 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T14:17:10.449Z,1465741030.449 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T14:17:48.653Z,1465741068.653 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2203.448438 min 2016-06-12T14:18:00.315Z,1465741080.315 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:18:00.317Z,1465741080.317 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:19:10.484Z,1465741150.484 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T14:19:10.881Z,1465741150.881 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-12T14:21:01.428Z,1465741261.428 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:21:01.434Z,1465741261.434 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:24:02.563Z,1465741442.563 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:24:02.565Z,1465741442.565 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:25:00.181Z,1465741500.181 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-12T14:27:03.578Z,1465741623.578 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:27:03.580Z,1465741623.580 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:28:21.782Z,1465741701.782 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2213.945833 min 2016-06-12T14:29:10.733Z,1465741750.733 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T14:30:04.470Z,1465741804.470 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:30:04.472Z,1465741804.472 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:31:11.092Z,1465741871.092 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T14:31:13.102Z,1465741873.102 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-12T14:33:05.542Z,1465741985.542 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:33:05.544Z,1465741985.544 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-12T14:33:13.502Z,1465741993.502 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-12T14:33:15.513Z,1465741995.513 [Rowe_600LCM](IMPORTANT): LCM not connected