2016-05-13T00:19:18.606Z,1463098758.606 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2016-05-13T00:19:20.318Z,1463098760.318 [ESPComponent](CRITICAL): No configuration setting for: ESPComponent.espSimulator
2016-05-13T00:19:20.326Z,1463098760.326 [ESPComponent](CRITICAL): No configuration setting for: ESPComponent.stopCompleteTimeout
2016-05-13T00:19:25.638Z,1463098765.638 [SBIT](IMPORTANT): git: 2015-11-13-11-g036008f
2016-05-13T00:19:25.639Z,1463098765.639 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2016-05-13T00:19:25.639Z,1463098765.639 [SBIT](IMPORTANT): Kernel Version:#639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
2016-05-13T00:19:25.802Z,1463098765.802 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T00:19:27.167Z,1463098767.167 [CommandLine](FAULT): Scheduling is paused
2016-05-13T00:19:27.988Z,1463098767.988 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2016-05-13T00:20:29.300Z,1463098829.300 [SBIT](IMPORTANT): Beginning Startup BIT
2016-05-13T00:20:29.335Z,1463098829.335 [CBIT](IMPORTANT): Beginning GF scan
2016-05-13T00:20:55.674Z,1463098855.674 [CBIT](IMPORTANT): No ground fault detected
2016-05-13T00:21:23.152Z,1463098883.152 [SBIT](IMPORTANT): SBIT PASSED
2016-05-13T00:21:23.605Z,1463098883.605 [MissionManager](IMPORTANT): Started mission Startup
2016-05-13T00:21:26.088Z,1463098886.088 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T00:21:28.106Z,1463098888.106 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T00:22:19.128Z,1463098939.128 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T00:22:28.658Z,1463098948.658 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:22:28.673Z,1463098948.673 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:23:25.249Z,1463099005.249 [MissionManager](IMPORTANT): Started mission Default
2016-05-13T00:23:28.325Z,1463099008.325 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T00:23:31.162Z,1463099011.162 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T00:24:14.742Z,1463099054.742 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T00:24:42.221Z,1463099082.221 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-05-13T00:25:31.311Z,1463099131.311 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T00:25:32.219Z,1463099132.219 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:25:32.222Z,1463099132.222 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:25:33.331Z,1463099133.331 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T00:27:33.441Z,1463099253.441 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T00:27:35.878Z,1463099255.878 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T00:28:41.705Z,1463099321.705 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:28:41.711Z,1463099321.711 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:29:36.153Z,1463099376.153 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T00:29:37.381Z,1463099377.381 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T00:29:42.759Z,1463099382.759 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T00:31:46.148Z,1463099506.148 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:31:46.151Z,1463099506.151 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:34:49.567Z,1463099689.567 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:34:49.569Z,1463099689.569 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:37:51.274Z,1463099871.274 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:37:51.276Z,1463099871.276 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:39:36.759Z,1463099976.759 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T00:40:11.536Z,1463100011.536 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T00:41:01.877Z,1463100061.877 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:41:01.879Z,1463100061.879 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:41:37.063Z,1463100097.063 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T00:41:39.112Z,1463100099.112 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T00:43:39.263Z,1463100219.263 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T00:43:41.690Z,1463100221.690 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T00:44:03.546Z,1463100243.546 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:44:03.682Z,1463100243.682 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:45:41.774Z,1463100341.774 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T00:45:45.401Z,1463100345.401 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T00:47:18.174Z,1463100438.174 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:47:18.176Z,1463100438.176 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:47:45.436Z,1463100465.436 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T00:47:49.061Z,1463100469.061 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T00:49:49.276Z,1463100589.276 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T00:49:50.477Z,1463100590.477 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T00:50:20.170Z,1463100620.170 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:50:20.172Z,1463100620.172 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:50:40.043Z,1463100640.043 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T00:53:23.117Z,1463100803.117 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:53:23.120Z,1463100803.120 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:56:26.110Z,1463100986.110 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:56:26.112Z,1463100986.112 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:59:29.120Z,1463101169.120 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:59:29.122Z,1463101169.122 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T00:59:49.935Z,1463101189.935 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:01:03.025Z,1463101263.025 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T01:01:50.024Z,1463101310.024 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:01:52.052Z,1463101312.052 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:02:29.669Z,1463101349.669 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:02:29.671Z,1463101349.671 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:03:52.180Z,1463101432.180 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:03:54.202Z,1463101434.202 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:05:34.339Z,1463101534.339 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:05:34.357Z,1463101534.357 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:05:47.994Z,1463101547.994 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T01:05:54.392Z,1463101554.392 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:05:56.852Z,1463101556.852 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:07:57.163Z,1463101677.163 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:08:00.384Z,1463101680.384 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:08:41.225Z,1463101721.225 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:08:41.227Z,1463101721.227 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:10:00.658Z,1463101800.658 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:10:00.972Z,1463101800.972 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T01:11:30.463Z,1463101890.463 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T01:11:30.552Z,1463101890.552 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T01:11:44.782Z,1463101904.782 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:11:44.816Z,1463101904.816 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:14:45.995Z,1463102085.995 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:14:46.009Z,1463102086.009 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:17:46.778Z,1463102266.778 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:17:46.780Z,1463102266.780 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:20:00.881Z,1463102400.881 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:20:52.182Z,1463102452.182 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:20:52.201Z,1463102452.201 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:22:01.019Z,1463102521.019 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:22:03.042Z,1463102523.042 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:23:54.505Z,1463102634.505 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:23:54.507Z,1463102634.507 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:23:54.889Z,1463102634.889 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T01:24:03.057Z,1463102643.057 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:24:05.087Z,1463102645.087 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:26:05.144Z,1463102765.144 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:26:08.775Z,1463102768.775 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:27:01.054Z,1463102821.054 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:27:01.060Z,1463102821.060 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:28:09.102Z,1463102889.102 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:28:13.673Z,1463102893.673 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:29:16.217Z,1463102956.217 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T01:30:08.649Z,1463103008.649 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:30:08.668Z,1463103008.668 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:30:13.761Z,1463103013.761 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:30:16.702Z,1463103016.702 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T01:33:10.673Z,1463103190.673 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:33:10.675Z,1463103190.675 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:34:21.212Z,1463103261.212 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T01:36:11.203Z,1463103371.203 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:36:11.221Z,1463103371.221 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:39:15.195Z,1463103555.195 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:39:15.197Z,1463103555.197 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:40:14.005Z,1463103614.005 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:42:14.108Z,1463103734.108 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:42:17.325Z,1463103737.325 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:42:18.962Z,1463103738.962 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:42:18.964Z,1463103738.964 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:44:17.713Z,1463103857.713 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:44:19.762Z,1463103859.762 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:44:53.480Z,1463103893.480 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T01:45:26.552Z,1463103926.552 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:45:26.565Z,1463103926.565 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:46:19.865Z,1463103979.865 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:46:24.292Z,1463103984.292 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:48:24.578Z,1463104104.578 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:48:26.997Z,1463104106.997 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T01:48:30.106Z,1463104110.106 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:48:30.109Z,1463104110.109 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:50:27.079Z,1463104227.079 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T01:50:28.255Z,1463104228.255 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T01:51:33.036Z,1463104293.036 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:51:33.038Z,1463104293.038 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:54:34.278Z,1463104474.278 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:54:34.280Z,1463104474.280 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:55:29.887Z,1463104529.887 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T01:57:34.855Z,1463104654.855 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T01:57:34.857Z,1463104654.857 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:00:31.272Z,1463104831.272 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:00:36.454Z,1463104836.454 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:00:36.456Z,1463104836.456 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:02:31.376Z,1463104951.376 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:02:36.208Z,1463104956.208 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:03:40.410Z,1463105020.410 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:03:40.412Z,1463105020.412 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:04:36.623Z,1463105076.623 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:04:39.489Z,1463105079.489 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:05:58.857Z,1463105158.857 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T02:05:59.651Z,1463105159.651 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T02:06:39.848Z,1463105199.848 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:06:43.496Z,1463105203.496 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:06:43.498Z,1463105203.498 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:06:43.923Z,1463105203.923 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:08:43.946Z,1463105323.946 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:08:47.967Z,1463105327.967 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:09:45.311Z,1463105385.311 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:09:45.328Z,1463105385.328 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:10:48.321Z,1463105448.321 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:10:49.733Z,1463105449.733 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T02:12:59.758Z,1463105579.758 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:12:59.760Z,1463105579.760 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:16:01.111Z,1463105761.111 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:16:01.113Z,1463105761.113 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:18:19.899Z,1463105899.899 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T02:19:04.293Z,1463105944.293 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:19:04.295Z,1463105944.295 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:20:47.364Z,1463106047.364 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T02:20:48.956Z,1463106048.956 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:22:09.426Z,1463106129.426 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:22:09.433Z,1463106129.433 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:22:49.342Z,1463106169.342 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:22:53.361Z,1463106173.361 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:23:28.044Z,1463106208.044 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T02:24:53.482Z,1463106293.482 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:24:55.567Z,1463106295.567 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:25:10.169Z,1463106310.169 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:25:10.769Z,1463106310.769 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:26:55.878Z,1463106415.878 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:26:57.896Z,1463106417.896 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:28:19.743Z,1463106499.743 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:28:19.745Z,1463106499.745 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:28:46.515Z,1463106526.515 [CommandLine](IMPORTANT): got command burn 300.000000
2016-05-13T02:28:47.365Z,1463106527.365 [Default:CheckIn:Read_Iridium:A_Timeout:B](CRITICAL): Dropped weight due to communications timeout.
2016-05-13T02:28:47.583Z,1463106527.583 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T02:28:48.662Z,1463106528.662 [NAL9602](FAULT): LCB fault:  Invalid Command. Hardware Overcurrent Shutdown. Software Overcurrent.
2016-05-13T02:28:58.263Z,1463106538.263 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:29:00.328Z,1463106540.328 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:31:00.378Z,1463106660.378 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:31:00.560Z,1463106660.560 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T02:31:20.638Z,1463106680.638 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:31:20.640Z,1463106680.640 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:33:46.598Z,1463106826.598 [CommandLine](IMPORTANT): Deactivating dropweight wire
2016-05-13T02:33:48.883Z,1463106828.883 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 130.387280 min 
2016-05-13T02:34:21.443Z,1463106861.443 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:34:21.445Z,1463106861.445 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:37:22.409Z,1463107042.409 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:37:22.411Z,1463107042.411 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:39:14.183Z,1463107154.183 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T02:40:23.442Z,1463107223.442 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:40:23.444Z,1463107223.444 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:41:02.598Z,1463107262.598 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:43:02.705Z,1463107382.705 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:43:04.723Z,1463107384.723 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:43:40.136Z,1463107420.136 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:43:40.138Z,1463107420.138 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:44:31.743Z,1463107471.743 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T02:45:04.879Z,1463107504.879 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:45:07.298Z,1463107507.298 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:46:40.984Z,1463107600.984 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:46:41.152Z,1463107601.152 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:47:07.545Z,1463107627.545 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:47:09.607Z,1463107629.607 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:49:09.614Z,1463107749.614 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:49:11.632Z,1463107751.632 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T02:49:45.943Z,1463107785.943 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:49:45.945Z,1463107785.945 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:49:46.525Z,1463107786.525 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T02:51:11.920Z,1463107871.920 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T02:51:13.781Z,1463107873.781 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T02:52:47.089Z,1463107967.089 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:52:47.091Z,1463107967.091 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:55:48.301Z,1463108148.301 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:55:48.303Z,1463108148.303 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:58:48.782Z,1463108328.782 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T02:58:48.793Z,1463108328.793 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:00:17.593Z,1463108417.593 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T03:00:17.627Z,1463108417.627 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T03:01:14.586Z,1463108474.586 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:01:52.605Z,1463108512.605 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:01:52.781Z,1463108512.781 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:03:14.695Z,1463108594.695 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:03:19.170Z,1463108599.170 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:04:56.459Z,1463108696.459 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:04:56.464Z,1463108696.464 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:05:19.586Z,1463108719.586 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:05:22.022Z,1463108722.022 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:07:22.099Z,1463108842.099 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:07:24.528Z,1463108844.528 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:08:02.712Z,1463108882.712 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:08:02.794Z,1463108882.794 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:09:24.853Z,1463108964.853 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:09:28.475Z,1463108968.475 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:11:12.915Z,1463109072.915 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:11:12.919Z,1463109072.919 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:11:28.767Z,1463109088.767 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:11:29.214Z,1463109089.214 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T03:12:37.417Z,1463109157.417 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T03:14:16.629Z,1463109256.629 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:14:16.631Z,1463109256.631 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:17:18.688Z,1463109438.688 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:17:18.690Z,1463109438.690 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:20:19.528Z,1463109619.528 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:20:19.530Z,1463109619.530 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:21:29.385Z,1463109689.385 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:22:58.711Z,1463109778.711 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T03:23:23.639Z,1463109803.639 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:23:23.641Z,1463109803.641 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:23:29.732Z,1463109809.732 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:23:32.147Z,1463109812.147 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:25:32.306Z,1463109932.306 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:25:34.325Z,1463109934.325 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:26:33.956Z,1463109993.956 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:26:33.959Z,1463109993.959 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:27:34.449Z,1463110054.449 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:27:37.279Z,1463110057.279 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:29:37.652Z,1463110177.652 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:29:38.964Z,1463110178.964 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:29:38.966Z,1463110178.966 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:29:39.669Z,1463110179.669 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:31:39.864Z,1463110299.864 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:31:40.337Z,1463110300.337 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T03:32:40.778Z,1463110360.778 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:32:40.780Z,1463110360.780 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:33:26.189Z,1463110406.189 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T03:35:41.791Z,1463110541.791 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:35:41.793Z,1463110541.793 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:38:42.300Z,1463110722.300 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:38:42.318Z,1463110722.318 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:41:41.336Z,1463110901.336 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:41:46.450Z,1463110906.450 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:41:46.453Z,1463110906.453 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:43:41.684Z,1463111021.684 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:43:44.907Z,1463111024.907 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:43:50.311Z,1463111030.311 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T03:44:48.628Z,1463111088.628 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:44:48.652Z,1463111088.652 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:45:45.196Z,1463111145.196 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:45:48.811Z,1463111148.811 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:47:49.087Z,1463111269.087 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:47:52.478Z,1463111272.478 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:47:52.480Z,1463111272.480 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:47:52.703Z,1463111272.703 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:49:52.914Z,1463111392.914 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:49:56.155Z,1463111396.155 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T03:50:53.516Z,1463111453.516 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:50:53.518Z,1463111453.518 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:51:56.371Z,1463111516.371 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T03:51:57.288Z,1463111517.288 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T03:53:57.025Z,1463111637.025 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:53:57.027Z,1463111637.027 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:54:17.321Z,1463111657.321 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T03:54:17.410Z,1463111657.410 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T03:57:00.422Z,1463111820.422 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T03:57:00.424Z,1463111820.424 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:00:02.987Z,1463112002.987 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:00:02.989Z,1463112002.989 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:01:58.218Z,1463112118.218 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:03:05.184Z,1463112185.184 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:03:05.186Z,1463112185.186 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:03:58.495Z,1463112238.495 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:04:00.531Z,1463112240.531 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:06:00.654Z,1463112360.654 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:06:03.876Z,1463112363.876 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:06:08.817Z,1463112368.817 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:06:08.819Z,1463112368.819 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:06:42.140Z,1463112402.140 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T04:08:04.168Z,1463112484.168 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:08:07.793Z,1463112487.793 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:09:14.196Z,1463112554.196 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:09:14.198Z,1463112554.198 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:10:08.024Z,1463112608.024 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:10:12.044Z,1463112612.044 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:12:12.390Z,1463112732.390 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:12:12.773Z,1463112732.773 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T04:12:15.893Z,1463112735.893 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:12:15.896Z,1463112735.896 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:15:18.663Z,1463112918.663 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:15:18.665Z,1463112918.665 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:17:14.512Z,1463113034.512 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T04:18:20.896Z,1463113100.896 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:18:20.899Z,1463113100.899 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:21:21.564Z,1463113281.564 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:21:21.568Z,1463113281.568 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:22:15.426Z,1463113335.426 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:24:15.435Z,1463113455.435 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:24:19.057Z,1463113459.057 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:24:24.020Z,1463113464.020 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:24:24.023Z,1463113464.023 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:26:19.294Z,1463113579.294 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:26:21.719Z,1463113581.719 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:27:25.013Z,1463113645.013 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:27:25.015Z,1463113645.015 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:27:50.286Z,1463113670.286 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T04:28:06.773Z,1463113686.773 [MassServo](FAULT): Mass Shifter uart error: serial timeout
2016-05-13T04:28:21.738Z,1463113701.738 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:28:25.211Z,1463113705.211 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:30:25.706Z,1463113825.706 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:30:29.184Z,1463113829.184 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:30:29.186Z,1463113829.186 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:30:29.331Z,1463113829.331 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:32:29.447Z,1463113949.447 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:32:29.817Z,1463113949.817 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T04:33:29.697Z,1463114009.697 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:33:29.699Z,1463114009.699 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:36:34.229Z,1463114194.229 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:36:34.231Z,1463114194.231 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:38:19.005Z,1463114299.005 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T04:38:49.243Z,1463114329.243 [CommandLine](IMPORTANT): got command burn 300.000000
2016-05-13T04:38:49.660Z,1463114329.660 [Default:CheckIn:Read_Iridium:A_Timeout:B](CRITICAL): Dropped weight due to communications timeout.
2016-05-13T04:39:34.994Z,1463114374.994 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:39:34.996Z,1463114374.996 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:42:29.680Z,1463114549.680 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:42:35.999Z,1463114555.999 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:42:36.001Z,1463114556.001 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:43:49.263Z,1463114629.263 [CommandLine](IMPORTANT): Deactivating dropweight wire
2016-05-13T04:43:50.825Z,1463114630.825 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 260.417904 min 
2016-05-13T04:44:29.972Z,1463114669.972 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:44:32.038Z,1463114672.038 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:45:36.806Z,1463114736.806 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:45:36.808Z,1463114736.808 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:46:32.366Z,1463114792.366 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:46:34.391Z,1463114794.391 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:48:34.582Z,1463114914.582 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:48:36.601Z,1463114916.601 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:48:39.102Z,1463114919.102 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:48:39.122Z,1463114919.122 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:48:40.284Z,1463114920.284 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T04:48:40.343Z,1463114920.343 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T04:50:36.930Z,1463115036.930 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:50:38.946Z,1463115038.946 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T04:51:42.522Z,1463115102.522 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:51:42.535Z,1463115102.535 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:52:39.359Z,1463115159.359 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T04:52:39.389Z,1463115159.389 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T04:54:44.005Z,1463115284.005 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:54:44.007Z,1463115284.007 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:57:46.783Z,1463115466.783 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T04:57:46.785Z,1463115466.785 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:00:47.428Z,1463115647.428 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:00:47.453Z,1463115647.453 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:01:07.621Z,1463115667.621 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T05:02:39.600Z,1463115759.600 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:03:56.843Z,1463115836.843 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:03:56.872Z,1463115836.872 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:04:39.908Z,1463115879.908 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:04:41.934Z,1463115881.934 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:06:42.118Z,1463116002.118 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:06:44.196Z,1463116004.196 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:06:57.603Z,1463116017.603 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:06:57.713Z,1463116017.713 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:08:44.247Z,1463116124.247 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:08:47.870Z,1463116127.870 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:10:09.394Z,1463116209.394 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:10:09.396Z,1463116209.396 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:10:48.052Z,1463116248.052 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:10:50.080Z,1463116250.080 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:11:28.335Z,1463116288.335 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T05:12:50.303Z,1463116370.303 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:12:53.552Z,1463116373.552 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T05:13:10.288Z,1463116390.288 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:13:10.290Z,1463116390.290 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:16:16.383Z,1463116576.383 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:16:16.385Z,1463116576.385 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:19:17.079Z,1463116757.079 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:19:17.081Z,1463116757.081 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:22:07.436Z,1463116927.436 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T05:22:22.659Z,1463116942.659 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:22:22.662Z,1463116942.662 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:22:52.997Z,1463116972.997 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:24:14.814Z,1463117054.814 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T05:24:53.341Z,1463117093.341 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:24:58.575Z,1463117098.575 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:25:27.935Z,1463117127.935 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:25:27.945Z,1463117127.945 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:25:28.080Z,1463117128.080 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-05-13T05:25:28.119Z,1463117128.119 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-05-13T05:26:58.782Z,1463117218.782 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:27:01.210Z,1463117221.210 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:29:01.520Z,1463117341.520 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:29:03.936Z,1463117343.936 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:31:04.119Z,1463117464.119 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:31:06.133Z,1463117466.133 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:32:37.834Z,1463117557.834 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T05:33:06.529Z,1463117586.529 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:33:06.882Z,1463117586.882 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T05:37:49.613Z,1463117869.613 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T05:37:54.473Z,1463117874.473 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 314.479622 min 
2016-05-13T05:43:08.751Z,1463118188.751 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T05:43:08.783Z,1463118188.783 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T05:43:09.178Z,1463118189.178 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:43:29.453Z,1463118209.453 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:43:29.484Z,1463118209.484 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:45:09.242Z,1463118309.242 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:45:11.275Z,1463118311.275 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:46:31.322Z,1463118391.322 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:46:31.324Z,1463118391.324 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:47:11.324Z,1463118431.324 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:47:15.744Z,1463118435.744 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:48:11.846Z,1463118491.846 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 324.769759 min 
2016-05-13T05:49:15.861Z,1463118555.861 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:49:17.069Z,1463118557.069 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-05-13T05:49:17.879Z,1463118557.879 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:49:32.251Z,1463118572.251 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:49:32.256Z,1463118572.256 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:51:17.919Z,1463118677.919 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:51:19.944Z,1463118679.944 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T05:52:33.393Z,1463118753.393 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:52:33.395Z,1463118753.395 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:53:20.324Z,1463118800.324 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T05:53:22.150Z,1463118802.150 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T05:55:22.537Z,1463118922.537 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T05:55:34.349Z,1463118934.349 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:55:34.351Z,1463118934.351 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:58:30.195Z,1463119110.195 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 335.075846 min 
2016-05-13T05:58:35.501Z,1463119115.501 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T05:58:35.504Z,1463119115.504 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:01:36.412Z,1463119296.412 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:01:36.414Z,1463119296.414 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:03:20.549Z,1463119400.549 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:04:40.330Z,1463119480.330 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:04:40.337Z,1463119480.337 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:05:20.878Z,1463119520.878 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:05:23.695Z,1463119523.695 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:05:39.998Z,1463119539.998 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T06:07:24.284Z,1463119644.284 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:07:26.718Z,1463119646.718 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:07:42.095Z,1463119662.095 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:07:42.102Z,1463119662.102 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:09:18.821Z,1463119758.821 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 345.877083 min 
2016-05-13T06:09:26.967Z,1463119766.967 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:09:28.996Z,1463119768.996 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:10:43.286Z,1463119843.286 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:10:43.288Z,1463119843.288 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:11:29.424Z,1463119889.424 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:11:31.494Z,1463119891.494 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:13:31.736Z,1463120011.736 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:13:35.665Z,1463120015.665 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T06:13:44.914Z,1463120024.914 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:13:44.916Z,1463120024.916 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:15:58.249Z,1463120158.249 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T06:16:46.038Z,1463120206.038 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:16:46.040Z,1463120206.040 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:17:35.618Z,1463120255.618 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T06:19:36.671Z,1463120376.671 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 356.184277 min 
2016-05-13T06:19:46.892Z,1463120386.892 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:19:46.894Z,1463120386.894 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:20:55.927Z,1463120455.927 [CBIT](IMPORTANT): Beginning GF scan
2016-05-13T06:22:47.914Z,1463120567.914 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:22:47.916Z,1463120567.916 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:23:31.983Z,1463120611.983 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:25:32.102Z,1463120732.102 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:25:36.532Z,1463120736.532 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:25:49.253Z,1463120749.253 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:25:49.255Z,1463120749.255 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:26:16.717Z,1463120776.717 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T06:27:36.784Z,1463120856.784 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:27:39.599Z,1463120859.599 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:28:50.591Z,1463120930.591 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:28:50.593Z,1463120930.593 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:29:39.610Z,1463120979.610 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:29:42.025Z,1463120982.025 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:30:34.197Z,1463121034.197 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 367.137012 min 
2016-05-13T06:31:42.272Z,1463121102.272 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:31:44.306Z,1463121104.306 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:31:52.141Z,1463121112.141 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:31:52.143Z,1463121112.143 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:33:44.410Z,1463121224.410 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:33:45.400Z,1463121225.400 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T06:34:53.203Z,1463121293.203 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:34:53.205Z,1463121293.205 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:36:45.031Z,1463121405.031 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T06:36:45.104Z,1463121405.104 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T06:37:54.856Z,1463121474.856 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:37:54.858Z,1463121474.858 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:40:52.038Z,1463121652.038 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 377.439714 min 
2016-05-13T06:40:55.365Z,1463121655.365 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:40:55.368Z,1463121655.368 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:43:44.691Z,1463121824.691 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:44:00.978Z,1463121840.978 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:44:00.980Z,1463121840.980 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:45:21.868Z,1463121921.868 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T06:45:45.048Z,1463121945.048 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:45:47.141Z,1463121947.141 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:47:02.057Z,1463122022.057 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:47:02.059Z,1463122022.059 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:47:17.868Z,1463122037.868 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T06:47:47.492Z,1463122067.492 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:47:49.511Z,1463122069.511 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:48:58.841Z,1463122138.841 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T06:49:49.895Z,1463122189.895 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:49:52.329Z,1463122192.329 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:50:03.894Z,1463122203.894 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:50:03.900Z,1463122203.900 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:51:32.613Z,1463122292.613 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 388.111556 min 
2016-05-13T06:51:52.684Z,1463122312.684 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:51:54.715Z,1463122314.715 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T06:53:04.665Z,1463122384.665 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:53:04.695Z,1463122384.695 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:53:54.949Z,1463122434.949 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T06:53:55.125Z,1463122435.125 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T06:56:05.725Z,1463122565.725 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:56:05.727Z,1463122565.727 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:59:06.584Z,1463122746.584 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:59:06.586Z,1463122746.586 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T06:59:17.765Z,1463122757.765 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T07:01:50.609Z,1463122910.609 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 398.417188 min 
2016-05-13T07:02:07.578Z,1463122927.578 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:02:07.581Z,1463122927.581 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:03:55.224Z,1463123035.224 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:05:08.411Z,1463123108.411 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:05:08.414Z,1463123108.414 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:05:55.308Z,1463123155.308 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:06:01.764Z,1463123161.764 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:08:01.914Z,1463123281.914 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:08:03.934Z,1463123283.934 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:08:09.465Z,1463123289.465 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:08:09.467Z,1463123289.467 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:09:37.058Z,1463123377.058 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T07:10:04.330Z,1463123404.330 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:10:06.364Z,1463123406.364 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:11:10.655Z,1463123470.655 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:11:10.657Z,1463123470.657 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:12:06.470Z,1463123526.470 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:12:08.497Z,1463123528.497 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:12:38.900Z,1463123558.900 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 409.220736 min 
2016-05-13T07:14:08.868Z,1463123648.868 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:14:09.004Z,1463123649.004 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T07:14:11.767Z,1463123651.767 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:14:11.769Z,1463123651.769 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:17:12.672Z,1463123832.672 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:17:12.674Z,1463123832.674 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:20:01.290Z,1463124001.290 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T07:20:13.861Z,1463124013.861 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:20:13.863Z,1463124013.863 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:23:01.477Z,1463124181.477 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 419.597461 min 
2016-05-13T07:23:14.831Z,1463124194.831 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:23:14.834Z,1463124194.834 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:24:09.074Z,1463124249.074 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:26:02.009Z,1463124362.009 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T07:26:09.309Z,1463124369.309 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:26:11.335Z,1463124371.335 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:26:15.744Z,1463124375.744 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:26:15.748Z,1463124375.748 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:28:11.406Z,1463124491.406 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:28:13.449Z,1463124493.449 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:29:17.024Z,1463124557.024 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:29:17.092Z,1463124557.092 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:30:13.724Z,1463124613.724 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:30:15.759Z,1463124615.759 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:30:21.757Z,1463124621.757 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T07:30:21.887Z,1463124621.887 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T07:32:16.086Z,1463124736.086 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:32:18.150Z,1463124738.150 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:32:18.630Z,1463124738.630 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:32:18.633Z,1463124738.633 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:33:51.627Z,1463124831.627 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 430.285482 min 
2016-05-13T07:34:18.477Z,1463124858.477 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:34:18.814Z,1463124858.814 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T07:35:19.874Z,1463124919.874 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:35:19.877Z,1463124919.877 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:38:20.843Z,1463125100.843 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:38:20.845Z,1463125100.845 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:41:21.726Z,1463125281.726 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:41:21.728Z,1463125281.728 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:42:35.902Z,1463125355.902 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T07:44:09.728Z,1463125449.728 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 440.733757 min 
2016-05-13T07:44:18.761Z,1463125458.761 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:44:22.616Z,1463125462.616 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:44:22.618Z,1463125462.618 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:46:18.808Z,1463125578.808 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:46:21.259Z,1463125581.259 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:47:31.731Z,1463125651.731 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:47:31.758Z,1463125651.758 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:48:21.672Z,1463125701.672 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:48:23.697Z,1463125703.697 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:50:23.745Z,1463125823.745 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:50:26.969Z,1463125826.969 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:50:34.266Z,1463125834.266 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:50:34.286Z,1463125834.286 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:52:27.059Z,1463125947.059 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:52:30.291Z,1463125950.291 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T07:52:53.694Z,1463125973.694 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T07:53:35.080Z,1463126015.080 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:53:35.766Z,1463126015.766 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:54:30.299Z,1463126070.299 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T07:54:31.528Z,1463126071.528 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T07:55:21.989Z,1463126121.989 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 451.939095 min 
2016-05-13T07:56:36.652Z,1463126196.652 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:56:37.051Z,1463126197.051 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:59:37.504Z,1463126377.504 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T07:59:37.901Z,1463126377.901 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:02:38.323Z,1463126558.323 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:02:38.753Z,1463126558.753 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:03:12.834Z,1463126592.834 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T08:04:30.992Z,1463126670.992 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:05:39.133Z,1463126739.133 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:05:40.589Z,1463126740.589 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 462.251530 min 
2016-05-13T08:05:59.571Z,1463126759.571 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:06:31.367Z,1463126791.367 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:06:33.390Z,1463126793.390 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:08:33.406Z,1463126913.406 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:08:35.425Z,1463126915.425 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:08:40.896Z,1463126920.896 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:09:01.164Z,1463126941.164 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:10:35.595Z,1463127035.595 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:10:37.617Z,1463127037.617 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:11:45.157Z,1463127105.157 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:12:01.862Z,1463127121.862 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:12:38.043Z,1463127158.043 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:12:40.062Z,1463127160.062 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:13:31.198Z,1463127211.198 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T08:14:40.190Z,1463127280.190 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:14:40.227Z,1463127280.227 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T08:14:46.761Z,1463127286.761 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:15:03.134Z,1463127303.134 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:16:19.062Z,1463127379.062 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 472.894531 min 
2016-05-13T08:17:47.925Z,1463127467.925 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:18:04.340Z,1463127484.340 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:20:48.929Z,1463127648.929 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:21:05.301Z,1463127665.301 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:23:49.847Z,1463127829.847 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T08:23:49.897Z,1463127829.897 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:23:49.920Z,1463127829.920 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T08:24:06.284Z,1463127846.284 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:24:40.868Z,1463127880.868 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:26:37.993Z,1463127997.993 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 483.205176 min 
2016-05-13T08:26:41.177Z,1463128001.177 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:26:44.003Z,1463128004.003 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:26:50.806Z,1463128010.806 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:27:07.221Z,1463128027.221 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:28:44.050Z,1463128124.050 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:28:45.863Z,1463128125.863 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T08:28:46.081Z,1463128126.081 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:29:52.007Z,1463128192.007 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:30:08.056Z,1463128208.056 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:30:46.351Z,1463128246.351 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:30:50.377Z,1463128250.377 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:31:03.718Z,1463128263.718 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T08:32:50.413Z,1463128370.413 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:32:52.463Z,1463128372.463 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:32:53.234Z,1463128373.234 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:33:09.583Z,1463128389.583 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:34:52.745Z,1463128492.745 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:34:53.217Z,1463128493.217 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T08:35:54.238Z,1463128554.238 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:36:02.586Z,1463128562.586 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T08:36:11.052Z,1463128571.052 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:37:20.782Z,1463128640.782 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 493.918490 min 
2016-05-13T08:38:55.213Z,1463128735.213 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:39:11.991Z,1463128751.991 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:41:55.987Z,1463128915.987 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:42:12.801Z,1463128932.801 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:44:53.421Z,1463129093.421 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:44:57.165Z,1463129097.165 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:45:13.998Z,1463129113.998 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:46:21.874Z,1463129181.874 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T08:46:53.639Z,1463129213.639 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:46:55.662Z,1463129215.662 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:47:39.186Z,1463129259.186 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 504.222949 min 
2016-05-13T08:47:58.206Z,1463129278.206 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:48:15.810Z,1463129295.810 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:48:55.900Z,1463129335.900 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:48:57.964Z,1463129337.964 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:50:57.989Z,1463129457.989 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:50:59.133Z,1463129459.133 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:51:00.012Z,1463129460.012 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:51:16.811Z,1463129476.811 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:53:00.417Z,1463129580.417 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:53:03.236Z,1463129583.236 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T08:53:59.671Z,1463129639.671 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:54:21.652Z,1463129661.652 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:55:03.378Z,1463129703.378 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T08:55:03.836Z,1463129703.836 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T08:56:49.281Z,1463129809.281 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T08:57:00.950Z,1463129820.950 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:57:23.059Z,1463129843.059 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T08:58:11.088Z,1463129891.088 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 514.757259 min 
2016-05-13T09:00:01.909Z,1463130001.909 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:00:24.119Z,1463130024.119 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:03:02.843Z,1463130182.843 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:03:25.466Z,1463130205.466 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:05:03.608Z,1463130303.608 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:06:04.154Z,1463130364.154 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:06:26.650Z,1463130386.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:07:03.965Z,1463130423.965 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:07:05.986Z,1463130425.986 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:07:07.611Z,1463130427.611 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T09:08:28.944Z,1463130508.944 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 525.050098 min 
2016-05-13T09:09:06.039Z,1463130546.039 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:09:06.241Z,1463130546.241 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:09:08.073Z,1463130548.073 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:09:28.156Z,1463130568.156 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:11:08.279Z,1463130668.279 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:11:10.309Z,1463130670.309 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:12:07.164Z,1463130727.164 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:12:29.685Z,1463130749.685 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:13:10.469Z,1463130790.469 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:13:12.526Z,1463130792.526 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:15:08.808Z,1463130908.808 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:15:12.673Z,1463130912.673 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:15:13.106Z,1463130913.106 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T09:15:33.227Z,1463130933.227 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:17:24.631Z,1463131044.631 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T09:17:25.801Z,1463131045.801 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T09:17:25.825Z,1463131045.825 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T09:18:09.968Z,1463131089.968 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:18:33.701Z,1463131113.701 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:19:33.803Z,1463131173.803 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 536.089160 min 
2016-05-13T09:21:10.799Z,1463131270.799 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:21:34.506Z,1463131294.506 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:24:11.730Z,1463131451.730 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:24:35.482Z,1463131475.482 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:25:12.891Z,1463131512.891 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:27:12.676Z,1463131632.676 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:27:13.050Z,1463131633.050 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:27:15.069Z,1463131635.069 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:27:36.684Z,1463131656.684 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:29:15.457Z,1463131755.457 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:29:17.486Z,1463131757.486 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:29:39.502Z,1463131779.502 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T09:29:53.028Z,1463131793.028 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 546.454883 min 
2016-05-13T09:30:13.613Z,1463131813.613 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:30:38.415Z,1463131838.415 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:31:17.653Z,1463131877.653 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:31:19.672Z,1463131879.672 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:33:14.896Z,1463131994.896 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:33:19.693Z,1463131999.693 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:33:21.714Z,1463132001.714 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:33:39.857Z,1463132019.857 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:34:14.733Z,1463132054.733 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T09:35:21.906Z,1463132121.906 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:35:22.739Z,1463132122.739 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T09:36:16.655Z,1463132176.655 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:36:40.709Z,1463132200.709 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:38:57.435Z,1463132337.435 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T09:39:17.435Z,1463132357.435 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:39:41.638Z,1463132381.638 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:40:06.803Z,1463132406.803 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T09:40:30.888Z,1463132430.888 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 557.086979 min 
2016-05-13T09:41:55.497Z,1463132515.497 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T09:42:18.301Z,1463132538.301 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:42:42.577Z,1463132562.577 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:45:19.201Z,1463132719.201 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:45:22.186Z,1463132722.186 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:45:44.517Z,1463132744.517 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:47:22.202Z,1463132842.202 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:47:24.220Z,1463132844.220 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:48:27.142Z,1463132907.142 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:48:46.102Z,1463132926.102 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:49:24.575Z,1463132964.575 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:49:26.593Z,1463132966.593 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:50:26.426Z,1463133026.426 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T09:51:16.682Z,1463133076.682 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 567.854818 min 
2016-05-13T09:51:26.596Z,1463133086.596 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:51:28.144Z,1463133088.144 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:51:28.615Z,1463133088.615 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:51:47.278Z,1463133107.278 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:53:28.698Z,1463133208.698 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:53:30.740Z,1463133210.740 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T09:54:29.498Z,1463133269.498 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:54:48.458Z,1463133288.458 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:55:30.823Z,1463133330.823 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T09:55:33.231Z,1463133333.231 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T09:57:30.420Z,1463133450.420 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T09:57:49.771Z,1463133469.771 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:00:31.294Z,1463133631.294 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:00:45.033Z,1463133645.033 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T10:00:50.666Z,1463133650.666 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:01:34.676Z,1463133694.676 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 578.150977 min 
2016-05-13T10:03:32.145Z,1463133812.145 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:03:51.503Z,1463133831.503 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:05:31.085Z,1463133931.085 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:06:33.052Z,1463133993.052 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:07:02.469Z,1463134022.469 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:07:31.453Z,1463134051.453 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:07:33.471Z,1463134053.471 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:09:33.549Z,1463134173.549 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:09:33.961Z,1463134173.961 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:09:35.563Z,1463134175.563 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:10:04.243Z,1463134204.243 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:11:03.569Z,1463134263.569 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T10:11:03.656Z,1463134263.656 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T10:11:35.934Z,1463134295.934 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:11:37.966Z,1463134297.966 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:12:18.727Z,1463134338.727 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 588.883984 min 
2016-05-13T10:12:34.459Z,1463134354.459 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:13:05.243Z,1463134385.243 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:13:38.357Z,1463134418.357 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:13:40.375Z,1463134420.375 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:15:35.421Z,1463134535.421 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:15:40.755Z,1463134540.755 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:15:41.032Z,1463134541.032 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T10:16:06.217Z,1463134566.217 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:18:39.177Z,1463134719.177 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:19:07.238Z,1463134747.238 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:21:39.670Z,1463134899.670 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:22:08.428Z,1463134928.428 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:22:36.455Z,1463134956.455 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 599.179492 min 
2016-05-13T10:23:17.768Z,1463134997.768 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T10:24:40.530Z,1463135080.530 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:25:09.310Z,1463135109.310 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:25:43.397Z,1463135143.397 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:27:43.732Z,1463135263.732 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:27:46.048Z,1463135266.048 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:27:46.151Z,1463135266.151 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:28:11.395Z,1463135291.395 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:29:46.265Z,1463135386.265 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:29:48.312Z,1463135388.312 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:30:46.780Z,1463135446.780 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:31:12.916Z,1463135472.916 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:31:48.431Z,1463135508.431 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:31:50.513Z,1463135510.513 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:33:18.055Z,1463135598.055 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 609.866146 min 
2016-05-13T10:33:36.755Z,1463135616.755 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T10:33:47.757Z,1463135627.757 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:33:50.520Z,1463135630.520 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:33:52.539Z,1463135632.539 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:34:14.148Z,1463135654.148 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:35:52.706Z,1463135752.706 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:35:52.896Z,1463135752.896 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T10:36:48.706Z,1463135808.706 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:37:15.513Z,1463135835.513 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:39:49.587Z,1463135989.587 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:40:16.408Z,1463136016.408 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:42:50.468Z,1463136170.468 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:42:50.480Z,1463136170.480 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-05-13T10:43:17.273Z,1463136197.273 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T10:43:17.286Z,1463136197.286 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-05-13T10:43:35.253Z,1463136215.253 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 620.160612 min 
2016-05-13T10:43:56.560Z,1463136236.560 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T10:45:52.951Z,1463136352.951 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:47:17.733Z,1463136437.733 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T10:47:52.954Z,1463136472.954 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:47:54.988Z,1463136474.988 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:49:55.384Z,1463136595.384 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:49:57.398Z,1463136597.398 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:51:57.578Z,1463136717.578 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:51:59.612Z,1463136719.612 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:53:59.912Z,1463136839.912 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:54:01.934Z,1463136841.934 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T10:54:17.278Z,1463136857.278 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T10:54:56.387Z,1463136896.387 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 631.504753 min 
2016-05-13T10:56:02.160Z,1463136962.160 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T10:56:02.696Z,1463136962.696 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T11:00:51.142Z,1463137251.142 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:01:18.086Z,1463137278.086 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:03:07.453Z,1463137387.453 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T11:03:52.007Z,1463137432.007 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:04:18.910Z,1463137458.910 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:04:38.081Z,1463137478.081 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T11:04:38.135Z,1463137478.135 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T11:05:14.529Z,1463137514.529 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 641.814518 min 
2016-05-13T11:06:02.431Z,1463137562.431 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:06:53.315Z,1463137613.315 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:07:25.600Z,1463137645.600 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:08:02.726Z,1463137682.726 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:08:04.757Z,1463137684.757 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:09:54.920Z,1463137794.920 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:10:05.041Z,1463137805.041 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:10:07.058Z,1463137807.058 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:10:27.087Z,1463137827.087 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:12:07.198Z,1463137927.198 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:12:09.215Z,1463137929.215 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:12:55.501Z,1463137975.501 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:13:29.351Z,1463138009.351 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:14:09.604Z,1463138049.604 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:14:13.237Z,1463138053.237 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:15:57.007Z,1463138157.007 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:16:00.562Z,1463138160.562 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 652.585677 min 
2016-05-13T11:16:13.394Z,1463138173.394 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:16:15.526Z,1463138175.526 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T11:16:30.402Z,1463138190.402 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:16:53.156Z,1463138213.156 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T11:18:58.088Z,1463138338.088 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:19:31.452Z,1463138371.452 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:21:59.140Z,1463138519.140 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:22:32.464Z,1463138552.464 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:25:00.094Z,1463138700.094 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:25:33.470Z,1463138733.470 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:26:13.640Z,1463138773.640 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:26:17.984Z,1463138777.984 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 662.869857 min 
2016-05-13T11:27:12.738Z,1463138832.738 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T11:28:00.989Z,1463138880.989 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:28:13.867Z,1463138893.867 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:28:15.894Z,1463138895.894 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:28:34.583Z,1463138914.583 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:30:16.153Z,1463139016.153 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:30:18.172Z,1463139018.172 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:31:02.524Z,1463139062.524 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:31:35.651Z,1463139095.651 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:32:18.270Z,1463139138.270 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:32:20.293Z,1463139140.293 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:34:11.700Z,1463139251.700 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:34:20.613Z,1463139260.613 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:34:22.643Z,1463139262.643 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:34:46.577Z,1463139286.577 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:36:22.787Z,1463139382.787 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:36:23.172Z,1463139383.172 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T11:37:02.881Z,1463139422.881 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 673.620182 min 
2016-05-13T11:37:13.380Z,1463139433.380 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:37:32.144Z,1463139452.144 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T11:37:48.175Z,1463139468.175 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:40:14.318Z,1463139614.318 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:40:49.183Z,1463139649.183 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:43:15.402Z,1463139795.402 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:43:50.308Z,1463139830.308 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:46:16.541Z,1463139976.541 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:46:23.472Z,1463139983.472 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:46:51.252Z,1463140011.252 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:47:20.763Z,1463140040.763 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 683.916146 min 
2016-05-13T11:47:49.702Z,1463140069.702 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T11:48:23.675Z,1463140103.675 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:48:26.495Z,1463140106.495 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:49:17.925Z,1463140157.925 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:49:53.397Z,1463140193.397 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:50:26.826Z,1463140226.826 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:50:32.050Z,1463140232.050 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:52:18.946Z,1463140338.946 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:52:32.440Z,1463140352.440 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:52:34.567Z,1463140354.567 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:52:58.554Z,1463140378.554 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:54:34.947Z,1463140474.947 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:54:37.057Z,1463140477.057 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T11:55:20.179Z,1463140520.179 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:55:59.912Z,1463140559.912 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:56:37.068Z,1463140597.068 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T11:56:37.167Z,1463140597.167 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T11:57:48.610Z,1463140668.610 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 694.382487 min 
2016-05-13T11:58:09.577Z,1463140689.577 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T11:58:09.647Z,1463140689.647 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T11:58:21.680Z,1463140701.680 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T11:59:01.350Z,1463140741.350 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:01:22.536Z,1463140882.536 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:02:02.308Z,1463140922.308 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:04:23.421Z,1463141063.421 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:04:32.168Z,1463141072.168 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T12:05:03.387Z,1463141103.387 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:06:37.742Z,1463141197.742 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:07:24.284Z,1463141244.284 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:08:04.386Z,1463141284.386 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:08:06.262Z,1463141286.262 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 704.681445 min 
2016-05-13T12:08:38.101Z,1463141318.101 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:08:40.121Z,1463141320.121 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:10:29.781Z,1463141429.781 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T12:10:30.238Z,1463141430.238 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:10:40.529Z,1463141440.529 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:10:42.567Z,1463141442.567 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:11:06.621Z,1463141466.621 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:12:42.722Z,1463141562.722 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:12:44.748Z,1463141564.748 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:13:33.458Z,1463141613.458 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:14:10.515Z,1463141650.515 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:14:44.958Z,1463141684.958 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:14:46.977Z,1463141686.977 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:16:34.289Z,1463141794.289 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:16:47.220Z,1463141807.220 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:16:47.669Z,1463141807.669 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T12:17:31.840Z,1463141851.840 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:19:11.610Z,1463141951.610 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 715.766797 min 
2016-05-13T12:19:35.416Z,1463141975.416 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:20:32.770Z,1463142032.770 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:20:47.534Z,1463142047.534 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T12:21:22.497Z,1463142082.497 [CBIT](IMPORTANT): Beginning GF scan
2016-05-13T12:22:36.256Z,1463142156.256 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:23:33.596Z,1463142213.596 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:25:37.219Z,1463142337.219 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:26:34.548Z,1463142394.548 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:26:47.462Z,1463142407.462 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:28:44.094Z,1463142524.094 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:28:47.754Z,1463142527.754 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:28:49.787Z,1463142529.787 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:29:28.768Z,1463142568.768 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 726.046224 min 
2016-05-13T12:29:39.395Z,1463142579.395 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:30:49.806Z,1463142649.806 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:30:51.825Z,1463142651.825 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:31:06.572Z,1463142666.572 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T12:31:45.344Z,1463142705.344 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:32:48.037Z,1463142768.037 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:32:52.096Z,1463142772.096 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:32:54.111Z,1463142774.111 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:34:46.980Z,1463142886.980 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:34:54.530Z,1463142894.530 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:34:56.593Z,1463142896.593 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:35:49.569Z,1463142949.569 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:36:56.701Z,1463143016.701 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:36:57.193Z,1463143017.193 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T12:37:55.853Z,1463143075.853 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:38:50.461Z,1463143130.461 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:40:03.849Z,1463143203.849 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 736.635872 min 
2016-05-13T12:40:56.688Z,1463143256.688 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:41:24.419Z,1463143284.419 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T12:41:51.250Z,1463143311.250 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:43:57.550Z,1463143437.550 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:44:52.080Z,1463143492.080 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:46:57.046Z,1463143617.046 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:46:58.502Z,1463143618.502 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:47:53.114Z,1463143673.114 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:48:57.049Z,1463143737.049 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:48:59.063Z,1463143739.063 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:49:59.686Z,1463143799.686 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:50:21.626Z,1463143821.626 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 746.926367 min 
2016-05-13T12:50:55.181Z,1463143855.181 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:50:59.259Z,1463143859.259 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:51:01.276Z,1463143861.276 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:51:41.868Z,1463143901.868 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T12:51:41.947Z,1463143901.947 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T12:53:01.307Z,1463143981.307 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:53:01.513Z,1463143981.513 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:53:03.542Z,1463143983.542 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:53:56.470Z,1463144036.470 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:55:03.924Z,1463144103.924 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:55:05.968Z,1463144105.968 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T12:56:02.441Z,1463144162.441 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:56:58.422Z,1463144218.422 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:57:06.116Z,1463144226.116 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T12:57:06.566Z,1463144226.566 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T12:59:03.739Z,1463144343.739 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T12:59:59.520Z,1463144399.520 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:01:07.304Z,1463144467.304 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 757.694857 min 
2016-05-13T13:02:04.625Z,1463144524.625 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:03:00.388Z,1463144580.388 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:03:54.885Z,1463144634.885 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T13:05:05.474Z,1463144705.474 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:06:01.263Z,1463144761.263 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:07:06.765Z,1463144826.765 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:08:06.860Z,1463144886.860 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:09:03.201Z,1463144943.201 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:09:06.783Z,1463144946.783 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:09:08.803Z,1463144948.803 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:11:08.327Z,1463145068.327 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:11:09.187Z,1463145069.187 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:11:11.237Z,1463145071.237 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:11:25.783Z,1463145085.783 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 768.001237 min 
2016-05-13T13:12:04.672Z,1463145124.672 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:13:11.372Z,1463145191.372 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:13:13.389Z,1463145193.389 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:14:10.131Z,1463145250.131 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:14:12.386Z,1463145252.386 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T13:14:38.335Z,1463145278.335 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T13:15:06.267Z,1463145306.267 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:15:13.652Z,1463145313.652 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:15:15.667Z,1463145315.667 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:17:16.076Z,1463145436.076 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:17:18.176Z,1463145438.176 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:17:18.217Z,1463145438.217 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T13:18:07.099Z,1463145487.099 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:20:18.884Z,1463145618.884 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:21:08.102Z,1463145668.102 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:22:11.478Z,1463145731.478 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 778.763802 min 
2016-05-13T13:23:19.850Z,1463145799.850 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:24:09.077Z,1463145849.077 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:24:40.019Z,1463145880.019 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T13:26:20.839Z,1463145980.839 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:27:10.053Z,1463146030.053 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:27:16.316Z,1463146036.316 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:29:16.643Z,1463146156.643 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:29:18.674Z,1463146158.674 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:29:21.907Z,1463146161.907 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:30:11.459Z,1463146211.459 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:31:18.987Z,1463146278.987 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:31:21.019Z,1463146281.019 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:32:23.127Z,1463146343.127 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:32:45.545Z,1463146365.545 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 789.329232 min 
2016-05-13T13:33:12.727Z,1463146392.727 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:33:21.160Z,1463146401.160 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:33:23.181Z,1463146403.181 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:34:58.365Z,1463146498.365 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T13:35:23.388Z,1463146523.388 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:35:23.841Z,1463146523.841 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:35:25.407Z,1463146525.407 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:36:14.972Z,1463146574.972 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:37:25.502Z,1463146645.502 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:37:25.775Z,1463146645.775 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T13:38:24.681Z,1463146704.681 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:39:16.228Z,1463146756.228 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:41:25.817Z,1463146885.817 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:42:17.397Z,1463146937.397 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:43:03.564Z,1463146983.564 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 799.631836 min 
2016-05-13T13:44:26.597Z,1463147066.597 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:45:16.745Z,1463147116.745 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T13:45:16.778Z,1463147116.778 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T13:45:17.971Z,1463147117.971 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:47:25.787Z,1463147245.787 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:47:27.408Z,1463147247.408 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:48:19.505Z,1463147299.505 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:49:26.151Z,1463147366.151 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:49:28.165Z,1463147368.165 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:50:28.555Z,1463147428.555 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:51:28.254Z,1463147488.254 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:51:30.274Z,1463147490.274 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:51:30.423Z,1463147490.423 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:53:30.532Z,1463147610.532 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:53:30.667Z,1463147610.667 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:53:32.709Z,1463147612.709 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:53:46.098Z,1463147626.098 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 810.336654 min 
2016-05-13T13:54:31.313Z,1463147671.313 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:55:32.841Z,1463147732.841 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:55:34.858Z,1463147734.858 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T13:56:32.232Z,1463147792.232 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:57:32.161Z,1463147852.161 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T13:57:32.347Z,1463147852.347 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T13:57:35.094Z,1463147855.094 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T13:57:35.555Z,1463147855.555 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T13:59:33.795Z,1463147973.795 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:00:33.161Z,1463148033.161 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:02:34.795Z,1463148154.795 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:03:34.102Z,1463148214.102 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:04:04.540Z,1463148244.540 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 820.647721 min 
2016-05-13T14:05:35.724Z,1463148335.724 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:06:34.983Z,1463148394.983 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:07:35.323Z,1463148455.323 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:07:56.452Z,1463148476.452 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T14:08:36.525Z,1463148516.525 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:09:35.715Z,1463148575.715 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:09:38.467Z,1463148578.467 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:09:38.534Z,1463148578.534 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:11:38.212Z,1463148698.212 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:11:38.621Z,1463148698.621 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:11:40.635Z,1463148700.635 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:12:39.123Z,1463148759.123 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:13:40.751Z,1463148820.751 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:13:48.397Z,1463148828.397 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:14:39.211Z,1463148879.211 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:14:41.289Z,1463148881.289 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 831.256576 min 
2016-05-13T14:15:39.831Z,1463148939.831 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:15:48.517Z,1463148948.517 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:15:50.535Z,1463148950.535 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:17:40.684Z,1463149060.684 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:17:50.710Z,1463149070.710 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:17:55.631Z,1463149075.631 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T14:18:30.860Z,1463149110.860 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T14:18:41.701Z,1463149121.701 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:20:41.554Z,1463149241.554 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:21:42.550Z,1463149302.550 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:23:42.438Z,1463149422.438 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:24:43.757Z,1463149483.757 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:24:59.384Z,1463149499.384 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 841.561654 min 
2016-05-13T14:26:43.642Z,1463149603.642 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:27:44.608Z,1463149664.608 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:27:51.332Z,1463149671.332 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:28:50.303Z,1463149730.303 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T14:29:44.600Z,1463149784.600 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:29:51.504Z,1463149791.504 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:29:53.525Z,1463149793.525 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:30:46.417Z,1463149846.417 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:31:53.597Z,1463149913.597 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:31:55.614Z,1463149915.614 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:32:47.559Z,1463149967.559 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:33:55.858Z,1463150035.858 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:33:56.759Z,1463150036.759 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:33:57.992Z,1463150037.992 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:35:37.125Z,1463150137.125 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 852.191797 min 
2016-05-13T14:35:48.488Z,1463150148.488 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:35:58.056Z,1463150158.056 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:36:00.074Z,1463150160.074 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:36:57.450Z,1463150217.450 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:38:00.458Z,1463150280.458 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:38:00.610Z,1463150280.610 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T14:38:49.530Z,1463150329.530 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:39:21.099Z,1463150361.099 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T14:39:21.171Z,1463150361.171 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T14:39:58.498Z,1463150398.498 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:41:50.616Z,1463150510.616 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:42:59.579Z,1463150579.579 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:44:51.480Z,1463150691.480 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:46:00.078Z,1463150760.078 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 862.573763 min 
2016-05-13T14:46:03.269Z,1463150763.269 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:47:52.564Z,1463150872.564 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:48:03.496Z,1463150883.496 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:49:11.046Z,1463150951.046 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:50:03.862Z,1463151003.862 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:50:06.682Z,1463151006.682 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:50:53.475Z,1463151053.475 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:51:39.722Z,1463151099.722 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T14:52:04.178Z,1463151124.178 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T14:52:04.952Z,1463151124.952 [PNI_TCM](FAULT): LCB fault: LCB Watchdog Reset. Invalid Command.
2016-05-13T14:52:06.971Z,1463151126.971 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:52:09.004Z,1463151129.004 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:52:11.846Z,1463151131.846 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:54:05.105Z,1463151245.105 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:54:09.145Z,1463151249.145 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:54:11.189Z,1463151251.189 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:55:12.763Z,1463151312.763 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:56:11.508Z,1463151371.508 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:56:13.527Z,1463151373.527 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T14:56:44.416Z,1463151404.416 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 873.311654 min 
2016-05-13T14:57:06.285Z,1463151426.285 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:58:13.565Z,1463151493.565 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T14:58:13.586Z,1463151493.586 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T14:58:13.936Z,1463151493.936 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T15:00:07.477Z,1463151607.477 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:01:14.801Z,1463151674.801 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:02:05.522Z,1463151725.522 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T15:03:08.502Z,1463151788.502 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:04:15.925Z,1463151855.925 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:06:09.377Z,1463151969.377 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:07:02.592Z,1463152022.592 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 883.615625 min 
2016-05-13T15:07:17.100Z,1463152037.100 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:08:13.828Z,1463152093.828 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:09:13.593Z,1463152153.593 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:10:13.954Z,1463152213.954 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:10:15.974Z,1463152215.974 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:10:18.016Z,1463152218.016 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:12:06.010Z,1463152326.010 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T15:12:16.341Z,1463152336.341 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:12:17.010Z,1463152337.010 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:12:19.180Z,1463152339.180 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:12:23.086Z,1463152343.086 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T15:13:18.925Z,1463152398.925 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:14:19.300Z,1463152459.300 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:14:21.322Z,1463152461.322 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:15:17.746Z,1463152517.746 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:16:19.804Z,1463152579.804 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:16:21.388Z,1463152581.388 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:16:23.407Z,1463152583.407 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:17:44.876Z,1463152664.876 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 894.323958 min 
2016-05-13T15:18:19.443Z,1463152699.443 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:18:23.655Z,1463152703.655 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:18:23.912Z,1463152703.912 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T15:19:20.702Z,1463152760.702 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:21:21.409Z,1463152881.409 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:22:21.532Z,1463152941.532 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:23:09.388Z,1463152989.388 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T15:24:22.500Z,1463153062.500 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:25:22.617Z,1463153122.617 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:27:23.338Z,1463153243.338 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:28:06.928Z,1463153286.928 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 904.688086 min 
2016-05-13T15:28:23.494Z,1463153303.494 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:28:23.900Z,1463153303.900 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:30:24.282Z,1463153424.282 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:30:24.296Z,1463153424.296 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:30:26.322Z,1463153426.322 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:31:24.442Z,1463153484.442 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:32:26.420Z,1463153546.420 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:32:28.459Z,1463153548.459 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:33:34.914Z,1463153614.914 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T15:33:35.045Z,1463153615.045 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:33:35.120Z,1463153615.120 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T15:34:25.674Z,1463153665.674 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:34:28.849Z,1463153668.849 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:34:30.872Z,1463153670.872 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:36:30.984Z,1463153790.984 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:36:33.003Z,1463153793.003 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:36:36.228Z,1463153796.228 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:37:26.859Z,1463153846.859 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:38:33.162Z,1463153913.162 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:38:33.668Z,1463153913.668 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T15:39:06.172Z,1463153946.172 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 915.674805 min 
2016-05-13T15:39:37.081Z,1463153977.081 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:40:28.416Z,1463154028.416 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:42:37.991Z,1463154157.991 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:43:29.352Z,1463154209.352 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:45:39.181Z,1463154339.181 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:45:48.741Z,1463154348.741 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T15:46:31.700Z,1463154391.700 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:48:33.467Z,1463154513.467 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:48:40.125Z,1463154520.125 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:49:29.188Z,1463154569.188 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 926.063086 min 
2016-05-13T15:49:50.944Z,1463154590.944 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:50:33.475Z,1463154633.475 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:50:35.918Z,1463154635.918 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:51:41.531Z,1463154701.531 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:52:36.114Z,1463154756.114 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:52:41.749Z,1463154761.749 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:52:52.436Z,1463154772.436 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:54:41.795Z,1463154881.795 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:54:42.509Z,1463154882.509 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:54:43.817Z,1463154883.817 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:55:54.016Z,1463154954.016 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:56:06.954Z,1463154966.954 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T15:56:43.818Z,1463155003.818 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:56:45.839Z,1463155005.839 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T15:57:43.673Z,1463155063.673 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T15:58:46.232Z,1463155126.232 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T15:58:46.648Z,1463155126.648 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T15:58:55.133Z,1463155135.133 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:00:11.664Z,1463155211.664 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 936.766927 min 
2016-05-13T16:00:44.623Z,1463155244.623 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:00:44.635Z,1463155244.635 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-05-13T16:01:55.970Z,1463155315.970 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:01:55.983Z,1463155315.983 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-05-13T16:06:33.904Z,1463155593.904 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T16:08:46.941Z,1463155726.941 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:10:29.420Z,1463155829.420 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 947.062240 min 
2016-05-13T16:10:47.240Z,1463155847.240 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:10:49.254Z,1463155849.254 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:12:49.297Z,1463155969.297 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:12:51.315Z,1463155971.315 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:14:51.438Z,1463156091.438 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:14:53.461Z,1463156093.461 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:16:53.816Z,1463156213.816 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:16:54.153Z,1463156214.153 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T16:16:55.830Z,1463156215.830 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:18:46.409Z,1463156326.409 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:18:56.045Z,1463156336.045 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:18:56.549Z,1463156336.549 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T16:19:56.777Z,1463156396.777 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:21:15.670Z,1463156475.670 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 957.833333 min 
2016-05-13T16:21:47.768Z,1463156507.768 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:22:57.562Z,1463156577.562 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:24:48.770Z,1463156688.770 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:25:58.476Z,1463156758.476 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:27:12.504Z,1463156832.504 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T16:27:12.564Z,1463156832.564 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T16:27:49.888Z,1463156869.888 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:28:56.688Z,1463156936.688 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:28:59.577Z,1463156939.577 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:30:50.688Z,1463157050.688 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:30:56.787Z,1463157056.787 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:30:58.807Z,1463157058.807 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:31:38.911Z,1463157098.911 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 968.214388 min 
2016-05-13T16:32:00.757Z,1463157120.757 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:32:58.872Z,1463157178.872 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:33:00.907Z,1463157180.907 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:33:52.368Z,1463157232.368 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:35:01.061Z,1463157301.061 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:35:01.531Z,1463157301.531 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:35:03.088Z,1463157303.088 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:36:14.348Z,1463157374.348 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T16:36:54.696Z,1463157414.696 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:37:03.385Z,1463157423.385 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:37:05.410Z,1463157425.410 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:38:02.790Z,1463157482.790 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:39:05.853Z,1463157545.853 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:39:06.208Z,1463157546.208 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T16:39:26.382Z,1463157566.382 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T16:40:04.823Z,1463157604.823 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:41:04.527Z,1463157664.527 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:41:26.681Z,1463157686.681 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T16:42:12.697Z,1463157732.697 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 978.783984 min 
2016-05-13T16:43:05.722Z,1463157785.722 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:44:05.466Z,1463157845.466 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:46:06.604Z,1463157966.604 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:47:06.370Z,1463158026.370 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:49:06.167Z,1463158146.167 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:49:07.659Z,1463158147.659 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:49:48.804Z,1463158188.804 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T16:50:07.316Z,1463158207.316 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:51:06.407Z,1463158266.407 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:51:08.485Z,1463158268.485 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:52:08.956Z,1463158328.956 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:52:39.407Z,1463158359.407 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 989.233073 min 
2016-05-13T16:53:08.762Z,1463158388.762 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:53:09.211Z,1463158389.211 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:53:10.783Z,1463158390.783 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:55:08.295Z,1463158508.295 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T16:55:10.357Z,1463158510.357 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:55:11.024Z,1463158511.024 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:55:13.060Z,1463158513.060 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:56:10.646Z,1463158570.646 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:57:13.236Z,1463158633.236 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:57:15.258Z,1463158635.258 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T16:58:14.300Z,1463158694.300 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:59:12.319Z,1463158752.319 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T16:59:15.600Z,1463158755.600 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T16:59:15.652Z,1463158755.652 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T17:00:06.999Z,1463158806.999 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T17:01:35.944Z,1463158895.944 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:02:13.357Z,1463158933.357 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:03:56.052Z,1463159036.052 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1000.511263 min 
2016-05-13T17:04:36.829Z,1463159076.829 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:05:14.176Z,1463159114.176 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:07:26.459Z,1463159246.459 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T17:07:37.683Z,1463159257.683 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:08:15.195Z,1463159295.195 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:09:17.060Z,1463159357.060 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:10:28.659Z,1463159428.659 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T17:10:38.593Z,1463159438.593 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:11:16.592Z,1463159476.592 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:11:17.412Z,1463159477.412 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:11:19.451Z,1463159479.451 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:13:19.590Z,1463159599.590 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:13:27.629Z,1463159607.629 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:13:39.728Z,1463159619.728 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:14:18.201Z,1463159658.201 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:14:20.244Z,1463159660.244 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1010.909115 min 
2016-05-13T17:15:27.676Z,1463159727.676 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:15:29.702Z,1463159729.702 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:16:41.245Z,1463159801.245 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:17:19.929Z,1463159839.929 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:17:30.217Z,1463159850.217 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:17:35.066Z,1463159855.066 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:19:35.311Z,1463159975.311 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:19:35.466Z,1463159975.466 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T17:19:44.788Z,1463159984.788 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:20:20.871Z,1463160020.871 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:20:46.779Z,1463160046.779 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T17:20:46.838Z,1463160046.838 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T17:22:45.538Z,1463160165.538 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:23:21.723Z,1463160201.723 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:24:47.885Z,1463160287.885 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1021.369727 min 
2016-05-13T17:25:46.371Z,1463160346.371 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:26:22.575Z,1463160382.575 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:28:47.397Z,1463160527.397 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:29:23.473Z,1463160563.473 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:29:35.566Z,1463160575.566 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:31:35.712Z,1463160695.712 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:31:39.334Z,1463160699.334 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:31:48.401Z,1463160708.401 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:32:24.751Z,1463160744.751 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:33:00.255Z,1463160780.255 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T17:33:39.450Z,1463160819.450 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:33:45.882Z,1463160825.882 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:34:49.895Z,1463160889.895 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:35:26.270Z,1463160926.270 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:35:36.456Z,1463160936.456 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1032.178971 min 
2016-05-13T17:35:46.089Z,1463160946.089 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:35:48.108Z,1463160948.108 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:37:48.239Z,1463161068.239 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:37:52.438Z,1463161072.438 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:37:52.665Z,1463161072.665 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:38:27.946Z,1463161107.946 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:39:52.721Z,1463161192.721 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:39:52.978Z,1463161192.978 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T17:40:53.007Z,1463161253.007 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:41:29.911Z,1463161289.911 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:43:18.981Z,1463161398.981 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T17:43:56.633Z,1463161436.633 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:44:30.771Z,1463161470.771 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:45:58.959Z,1463161558.959 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1042.555143 min 
2016-05-13T17:46:57.559Z,1463161617.559 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:47:31.744Z,1463161651.744 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:49:52.966Z,1463161792.966 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:49:58.440Z,1463161798.440 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:50:32.784Z,1463161832.784 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:51:41.324Z,1463161901.324 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T17:51:53.015Z,1463161913.015 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:51:55.058Z,1463161915.058 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:52:54.500Z,1463161974.500 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T17:52:59.360Z,1463161979.360 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:53:33.666Z,1463162013.666 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:53:37.106Z,1463162017.106 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T17:53:55.091Z,1463162035.091 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:53:57.117Z,1463162037.117 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:55:57.355Z,1463162157.355 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:55:58.840Z,1463162158.840 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T17:55:59.374Z,1463162159.374 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:56:00.466Z,1463162160.466 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:56:35.207Z,1463162195.207 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:56:44.768Z,1463162204.768 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1053.317188 min 
2016-05-13T17:57:59.657Z,1463162279.657 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T17:58:01.676Z,1463162281.676 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T17:59:06.512Z,1463162346.512 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T17:59:36.537Z,1463162376.537 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:00:01.982Z,1463162401.982 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:00:02.091Z,1463162402.091 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T18:02:07.951Z,1463162527.951 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:02:37.257Z,1463162557.257 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:03:58.445Z,1463162638.445 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T18:05:08.796Z,1463162708.796 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:05:37.999Z,1463162737.999 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:07:02.964Z,1463162822.964 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1063.622005 min 
2016-05-13T18:08:09.649Z,1463162889.649 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:08:38.885Z,1463162918.885 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:10:02.252Z,1463163002.252 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:11:13.488Z,1463163073.488 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:11:40.335Z,1463163100.335 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:11:46.063Z,1463163106.063 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T18:12:02.555Z,1463163122.555 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:12:04.586Z,1463163124.586 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:12:07.611Z,1463163127.611 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T18:14:04.846Z,1463163244.846 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:14:06.928Z,1463163246.928 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:14:14.690Z,1463163254.690 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:14:18.040Z,1463163258.040 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T18:14:18.361Z,1463163258.361 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T18:14:48.286Z,1463163288.286 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:16:07.111Z,1463163367.111 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:16:09.141Z,1463163369.141 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:17:15.687Z,1463163435.687 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:17:56.970Z,1463163476.970 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:17:57.721Z,1463163477.721 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1074.528776 min 
2016-05-13T18:18:09.208Z,1463163489.208 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:18:11.230Z,1463163491.230 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:20:11.474Z,1463163611.474 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:20:11.489Z,1463163611.489 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T18:20:16.830Z,1463163616.830 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:20:59.303Z,1463163659.303 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:21:49.090Z,1463163709.090 [CBIT](IMPORTANT): Beginning GF scan
2016-05-13T18:23:17.924Z,1463163797.924 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:24:00.414Z,1463163840.414 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:26:18.856Z,1463163978.856 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:26:32.494Z,1463163992.494 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T18:27:01.325Z,1463164021.325 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:28:15.944Z,1463164095.944 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1084.837370 min 
2016-05-13T18:29:19.366Z,1463164159.366 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:30:02.248Z,1463164202.248 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:30:12.096Z,1463164212.096 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:32:12.483Z,1463164332.483 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:32:14.506Z,1463164334.506 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:32:20.155Z,1463164340.155 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:33:03.186Z,1463164383.186 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:34:14.780Z,1463164454.780 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:34:16.807Z,1463164456.807 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:35:21.112Z,1463164521.112 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:36:08.390Z,1463164568.390 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:36:16.994Z,1463164576.994 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:36:19.012Z,1463164579.012 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:36:50.807Z,1463164610.807 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T18:38:19.135Z,1463164699.135 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:38:21.159Z,1463164701.159 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:38:22.958Z,1463164702.958 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:38:59.330Z,1463164739.330 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1095.557682 min 
2016-05-13T18:39:10.428Z,1463164750.428 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:40:21.404Z,1463164821.404 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:40:21.815Z,1463164821.815 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T18:41:24.047Z,1463164884.047 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:42:11.334Z,1463164931.334 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:44:25.077Z,1463165065.077 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:45:12.252Z,1463165112.252 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:47:12.581Z,1463165232.581 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T18:47:25.975Z,1463165245.975 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:48:13.156Z,1463165293.156 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:49:16.935Z,1463165356.935 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1105.854818 min 
2016-05-13T18:50:21.679Z,1463165421.679 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:50:26.842Z,1463165426.842 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:51:14.062Z,1463165474.062 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:52:22.011Z,1463165542.011 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:52:24.429Z,1463165544.429 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:53:28.004Z,1463165608.004 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:53:47.393Z,1463165627.393 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T18:54:15.575Z,1463165655.575 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:54:24.553Z,1463165664.553 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:54:26.991Z,1463165666.991 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:56:27.206Z,1463165787.206 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:56:29.225Z,1463165789.225 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:56:29.311Z,1463165789.311 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:57:17.460Z,1463165837.460 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:57:32.268Z,1463165852.268 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T18:58:29.236Z,1463165909.236 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T18:58:31.262Z,1463165911.262 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T18:59:30.528Z,1463165970.528 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T18:59:45.577Z,1463165985.577 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1116.326042 min 
2016-05-13T19:00:18.369Z,1463166018.369 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:00:31.381Z,1463166031.381 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:00:31.835Z,1463166031.835 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T19:02:31.811Z,1463166151.811 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:03:19.194Z,1463166199.194 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:05:33.011Z,1463166333.011 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:06:19.955Z,1463166379.955 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:08:08.592Z,1463166488.592 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T19:08:08.712Z,1463166488.712 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T19:08:33.968Z,1463166513.968 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:09:20.956Z,1463166560.956 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:10:02.966Z,1463166602.966 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1126.622005 min 
2016-05-13T19:10:31.635Z,1463166631.635 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:11:35.173Z,1463166695.173 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:12:21.820Z,1463166741.820 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:12:32.051Z,1463166752.051 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:12:34.074Z,1463166754.074 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:14:34.472Z,1463166874.472 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:14:36.374Z,1463166876.374 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:14:36.492Z,1463166876.492 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:15:32.647Z,1463166932.647 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:16:36.530Z,1463166996.530 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:16:38.557Z,1463166998.557 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:17:37.326Z,1463167057.326 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:18:34.080Z,1463167114.080 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:18:38.907Z,1463167118.907 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:18:40.942Z,1463167120.942 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:20:22.113Z,1463167222.113 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T19:20:38.246Z,1463167238.246 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:20:41.333Z,1463167241.333 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:20:41.790Z,1463167241.790 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T19:20:51.865Z,1463167251.865 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1137.436849 min 
2016-05-13T19:21:35.979Z,1463167295.979 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:23:39.707Z,1463167419.707 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:24:37.108Z,1463167477.108 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:26:40.880Z,1463167600.880 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:27:37.929Z,1463167657.929 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:29:29.339Z,1463167769.339 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T19:29:41.751Z,1463167781.751 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:30:38.740Z,1463167838.740 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:30:41.955Z,1463167841.955 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:30:42.326Z,1463167842.326 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T19:31:10.245Z,1463167870.245 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1147.735286 min 
2016-05-13T19:32:35.899Z,1463167955.899 [CBIT](CRITICAL): Data Fault in component: PAR_Licor
2016-05-13T19:32:42.310Z,1463167962.310 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:32:42.700Z,1463167962.700 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:32:44.326Z,1463167964.326 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:33:39.711Z,1463168019.711 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:34:44.585Z,1463168084.585 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:34:46.614Z,1463168086.614 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:35:43.687Z,1463168143.687 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:36:40.679Z,1463168200.679 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:36:46.988Z,1463168206.988 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:36:49.001Z,1463168209.001 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:38:44.861Z,1463168324.861 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:38:49.301Z,1463168329.301 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:38:51.323Z,1463168331.323 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:39:42.502Z,1463168382.502 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:40:51.698Z,1463168451.698 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:40:52.029Z,1463168452.029 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T19:41:01.826Z,1463168461.826 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T19:41:47.071Z,1463168507.071 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:41:51.485Z,1463168511.485 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1158.430208 min 
2016-05-13T19:42:44.030Z,1463168564.030 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:44:47.930Z,1463168687.930 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:45:45.237Z,1463168745.237 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:47:33.843Z,1463168853.843 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T19:47:48.753Z,1463168868.753 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:48:46.027Z,1463168926.027 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:50:49.843Z,1463169049.843 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:50:51.932Z,1463169051.932 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:51:19.283Z,1463169079.283 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T19:51:47.091Z,1463169107.091 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:52:09.436Z,1463169129.436 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1168.728906 min 
2016-05-13T19:52:52.030Z,1463169172.030 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:52:54.053Z,1463169174.053 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:53:50.836Z,1463169230.836 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:54:48.629Z,1463169288.629 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:54:54.300Z,1463169294.300 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:54:56.343Z,1463169296.343 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:56:51.908Z,1463169411.908 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:56:56.609Z,1463169416.609 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:56:58.624Z,1463169418.624 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:58:09.355Z,1463169489.355 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T19:58:58.703Z,1463169538.703 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T19:59:00.729Z,1463169540.729 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T19:59:53.626Z,1463169593.626 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:01:00.756Z,1463169660.756 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:01:00.971Z,1463169660.971 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T20:01:11.490Z,1463169671.490 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:01:37.569Z,1463169697.569 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T20:01:37.632Z,1463169697.632 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T20:02:54.918Z,1463169774.918 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:03:16.565Z,1463169796.565 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1179.847656 min 
2016-05-13T20:04:12.662Z,1463169852.662 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:05:55.802Z,1463169955.802 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:07:13.584Z,1463170033.584 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:08:56.841Z,1463170136.841 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:10:14.562Z,1463170214.562 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:11:01.486Z,1463170261.486 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:11:58.529Z,1463170318.529 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:13:01.873Z,1463170381.873 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:13:03.893Z,1463170383.893 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:13:15.785Z,1463170395.785 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:13:34.189Z,1463170414.189 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1190.147396 min 
2016-05-13T20:13:45.938Z,1463170425.938 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T20:13:51.131Z,1463170431.131 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T20:15:00.020Z,1463170500.020 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:15:04.063Z,1463170504.063 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:15:06.086Z,1463170506.086 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:16:16.861Z,1463170576.861 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:17:06.272Z,1463170626.272 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:17:08.292Z,1463170628.292 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:18:01.757Z,1463170681.757 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:19:08.474Z,1463170748.474 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:19:14.511Z,1463170754.511 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:19:19.636Z,1463170759.636 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:21:03.287Z,1463170863.287 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:21:14.874Z,1463170874.874 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:21:15.356Z,1463170875.356 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T20:22:20.317Z,1463170940.317 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:24:04.614Z,1463171044.614 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:24:09.382Z,1463171049.382 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T20:24:22.649Z,1463171062.649 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1200.949609 min 
2016-05-13T20:25:21.158Z,1463171121.158 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:27:05.477Z,1463171225.477 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:28:22.211Z,1463171302.211 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:30:06.284Z,1463171406.284 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:31:15.153Z,1463171475.153 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:31:23.163Z,1463171483.163 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:33:07.212Z,1463171587.212 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:33:15.423Z,1463171595.423 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:33:17.442Z,1463171597.442 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:34:24.142Z,1463171664.142 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:34:28.983Z,1463171668.983 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T20:34:41.137Z,1463171681.137 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1211.251172 min 
2016-05-13T20:35:17.590Z,1463171717.590 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:35:19.615Z,1463171719.615 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:36:09.142Z,1463171769.142 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:37:19.852Z,1463171839.852 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:37:21.873Z,1463171841.873 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:37:25.541Z,1463171845.541 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:39:10.699Z,1463171950.699 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:39:22.049Z,1463171962.049 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:39:24.068Z,1463171964.068 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:40:35.163Z,1463172035.163 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:41:05.751Z,1463172065.751 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T20:41:24.150Z,1463172084.150 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:41:24.211Z,1463172084.211 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T20:42:12.530Z,1463172132.530 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:43:36.279Z,1463172216.279 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:44:52.725Z,1463172292.725 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T20:45:13.573Z,1463172313.573 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:45:25.180Z,1463172325.180 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1221.992188 min 
2016-05-13T20:46:37.434Z,1463172397.434 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:48:14.620Z,1463172494.620 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:49:38.484Z,1463172578.484 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:51:15.440Z,1463172675.440 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:51:24.371Z,1463172684.371 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:52:39.595Z,1463172759.595 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:53:24.374Z,1463172804.374 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:53:26.396Z,1463172806.396 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:54:16.697Z,1463172856.697 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:55:10.402Z,1463172910.402 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T20:55:11.017Z,1463172911.017 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T20:55:26.519Z,1463172926.519 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:55:28.554Z,1463172928.554 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:55:41.724Z,1463172941.724 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:55:43.514Z,1463172943.514 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1232.295703 min 
2016-05-13T20:57:18.172Z,1463173038.172 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:57:28.680Z,1463173048.680 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:57:30.716Z,1463173050.716 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T20:58:43.593Z,1463173123.593 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T20:59:31.022Z,1463173171.022 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T20:59:33.049Z,1463173173.049 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:00:19.109Z,1463173219.109 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:01:33.200Z,1463173293.200 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:01:35.346Z,1463173295.346 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T21:02:03.390Z,1463173323.390 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:03:20.754Z,1463173400.754 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:05:04.315Z,1463173504.315 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:06:21.657Z,1463173581.657 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:06:28.916Z,1463173588.916 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1243.053255 min 
2016-05-13T21:07:23.328Z,1463173643.328 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T21:08:05.499Z,1463173685.499 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:09:22.497Z,1463173762.497 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:11:06.376Z,1463173866.376 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:11:33.498Z,1463173893.498 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:12:23.329Z,1463173943.329 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:13:29.130Z,1463174009.130 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T21:13:33.604Z,1463174013.604 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:13:35.624Z,1463174015.624 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:14:07.812Z,1463174047.812 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:15:25.319Z,1463174125.319 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:15:35.781Z,1463174135.781 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:15:37.805Z,1463174137.805 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:16:55.020Z,1463174215.020 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1253.487630 min 
2016-05-13T21:17:09.082Z,1463174229.082 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:17:38.011Z,1463174258.011 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:17:40.034Z,1463174260.034 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:17:41.642Z,1463174261.642 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T21:18:27.234Z,1463174307.234 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:18:27.545Z,1463174307.545 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-05-13T21:19:40.144Z,1463174380.144 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:19:42.164Z,1463174382.164 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:20:10.475Z,1463174410.475 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:20:10.545Z,1463174410.545 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-05-13T21:21:42.250Z,1463174502.250 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:21:42.297Z,1463174502.297 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T21:27:17.700Z,1463174837.700 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1263.866927 min 
2016-05-13T21:28:10.938Z,1463174890.938 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T21:31:42.616Z,1463175102.616 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:33:42.671Z,1463175222.671 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:33:44.697Z,1463175224.697 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:35:44.816Z,1463175344.816 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:35:46.831Z,1463175346.831 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:36:28.780Z,1463175388.780 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:37:47.119Z,1463175467.119 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:37:49.141Z,1463175469.141 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:38:03.181Z,1463175483.181 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1274.607161 min 
2016-05-13T21:38:19.103Z,1463175499.103 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:38:30.313Z,1463175510.313 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T21:39:30.876Z,1463175570.876 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:39:49.401Z,1463175589.401 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:39:51.895Z,1463175591.895 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:41:19.966Z,1463175679.966 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:41:51.981Z,1463175711.981 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:41:52.360Z,1463175712.360 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T21:42:32.214Z,1463175752.214 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:44:23.485Z,1463175863.485 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:45:33.267Z,1463175933.267 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:47:26.908Z,1463176046.908 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:48:20.628Z,1463176100.628 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1284.917057 min 
2016-05-13T21:48:34.368Z,1463176114.368 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:48:51.501Z,1463176131.501 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T21:48:51.553Z,1463176131.553 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T21:50:27.434Z,1463176227.434 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:51:35.189Z,1463176295.189 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:51:52.297Z,1463176312.297 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:53:33.233Z,1463176413.233 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:53:52.591Z,1463176432.591 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:53:55.415Z,1463176435.415 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:54:36.737Z,1463176476.737 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:55:55.774Z,1463176555.774 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:55:57.793Z,1463176557.793 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:56:34.803Z,1463176594.803 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:57:38.193Z,1463176658.193 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T21:57:57.840Z,1463176677.840 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T21:58:04.685Z,1463176684.685 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T21:58:59.391Z,1463176739.391 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1295.545703 min 
2016-05-13T21:59:36.553Z,1463176776.553 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:00:04.825Z,1463176804.825 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:00:06.847Z,1463176806.847 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:00:39.568Z,1463176839.568 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:01:09.714Z,1463176869.714 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T22:02:07.061Z,1463176927.061 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:02:08.360Z,1463176928.360 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T22:02:37.613Z,1463176957.613 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:03:40.997Z,1463177020.997 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:05:38.496Z,1463177138.496 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:06:41.880Z,1463177201.880 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:08:39.391Z,1463177319.391 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:09:16.558Z,1463177356.558 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1305.848438 min 
2016-05-13T22:09:42.745Z,1463177382.745 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:11:28.974Z,1463177488.974 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T22:11:40.593Z,1463177500.593 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:12:07.740Z,1463177527.740 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:12:43.724Z,1463177563.724 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:14:07.843Z,1463177647.843 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:14:09.898Z,1463177649.898 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:14:51.772Z,1463177691.772 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:15:45.245Z,1463177745.245 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:16:09.967Z,1463177769.967 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:16:13.597Z,1463177773.597 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:17:53.238Z,1463177873.238 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:18:13.968Z,1463177893.968 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:18:16.801Z,1463177896.801 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:18:46.477Z,1463177926.477 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:20:10.901Z,1463178010.901 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1316.753516 min 
2016-05-13T22:20:16.976Z,1463178016.976 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:20:19.415Z,1463178019.415 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:20:54.119Z,1463178054.119 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:21:47.137Z,1463178107.137 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:21:48.460Z,1463178108.460 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T22:22:19.514Z,1463178139.514 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:22:21.000Z,1463178141.000 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T22:23:55.630Z,1463178235.630 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:24:48.238Z,1463178288.238 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:26:56.595Z,1463178416.595 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:27:49.180Z,1463178469.180 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:29:57.507Z,1463178597.507 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:30:33.486Z,1463178633.486 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1327.130599 min 
2016-05-13T22:30:50.050Z,1463178650.050 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:32:07.022Z,1463178727.022 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T22:32:20.176Z,1463178740.176 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:32:59.223Z,1463178779.223 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:33:52.639Z,1463178832.639 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:34:20.212Z,1463178860.212 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:34:22.229Z,1463178862.229 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:35:34.070Z,1463178934.070 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T22:36:05.715Z,1463178965.715 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2016-05-13T22:36:05.755Z,1463178965.755 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:36:22.350Z,1463178982.350 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:36:25.985Z,1463178985.985 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:36:54.657Z,1463179014.657 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:38:26.309Z,1463179106.309 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:38:32.334Z,1463179112.334 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:39:07.240Z,1463179147.240 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:39:56.206Z,1463179196.206 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:40:32.548Z,1463179232.548 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:40:34.566Z,1463179234.566 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:41:22.183Z,1463179282.183 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1337.940755 min 
2016-05-13T22:42:08.626Z,1463179328.626 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:42:34.920Z,1463179354.920 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:42:38.381Z,1463179358.381 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T22:42:38.558Z,1463179358.558 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T22:42:38.567Z,1463179358.567 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T22:42:57.887Z,1463179377.887 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:45:09.723Z,1463179509.723 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:45:58.669Z,1463179558.669 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:48:10.681Z,1463179690.681 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:48:59.684Z,1463179739.684 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:51:11.638Z,1463179871.638 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:51:44.412Z,1463179904.412 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1348.312760 min 
2016-05-13T22:52:00.587Z,1463179920.587 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:52:35.227Z,1463179955.227 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:54:13.272Z,1463180053.272 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:54:35.287Z,1463180075.287 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:54:37.314Z,1463180077.314 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:54:56.774Z,1463180096.774 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T22:55:01.525Z,1463180101.525 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:55:55.479Z,1463180155.479 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-13T22:56:37.713Z,1463180197.713 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:56:39.735Z,1463180199.735 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T22:57:18.183Z,1463180238.183 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:58:02.966Z,1463180282.966 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T22:58:39.982Z,1463180319.982 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T22:58:42.426Z,1463180322.426 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:00:19.387Z,1463180419.387 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:00:42.504Z,1463180442.504 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:00:44.518Z,1463180444.518 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:01:04.945Z,1463180464.945 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:02:44.634Z,1463180564.634 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:02:45.651Z,1463180565.651 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1358.980599 min 
2016-05-13T23:02:45.679Z,1463180565.679 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T23:03:20.532Z,1463180600.532 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:04:06.695Z,1463180646.695 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:05:16.467Z,1463180716.467 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T23:06:21.456Z,1463180781.456 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:07:07.566Z,1463180827.566 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:09:22.319Z,1463180962.319 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:10:11.196Z,1463181011.196 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:12:23.548Z,1463181143.548 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:12:44.920Z,1463181164.920 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:13:08.551Z,1463181188.551 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1369.710417 min 
2016-05-13T23:13:27.715Z,1463181207.715 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:14:44.991Z,1463181284.991 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:14:47.012Z,1463181287.012 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:15:24.962Z,1463181324.962 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:15:34.575Z,1463181334.575 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T23:16:29.325Z,1463181389.325 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:16:47.360Z,1463181407.360 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:16:49.375Z,1463181409.375 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:18:32.628Z,1463181512.628 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:18:49.642Z,1463181529.642 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:18:53.663Z,1463181533.663 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:19:29.907Z,1463181569.907 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:20:53.839Z,1463181653.839 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:20:55.852Z,1463181655.852 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:21:35.147Z,1463181695.147 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:22:31.570Z,1463181751.570 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:22:55.916Z,1463181775.916 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:22:56.395Z,1463181776.395 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T23:24:04.186Z,1463181844.186 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1380.642578 min 
2016-05-13T23:24:36.383Z,1463181876.383 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:25:32.548Z,1463181932.548 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:25:53.708Z,1463181953.708 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T23:27:37.551Z,1463182057.551 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:28:33.689Z,1463182113.689 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:30:38.708Z,1463182238.708 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:31:34.515Z,1463182294.515 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:32:56.558Z,1463182376.558 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:33:40.187Z,1463182420.187 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:34:22.412Z,1463182462.412 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1390.940234 min 
2016-05-13T23:34:35.739Z,1463182475.739 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:34:56.845Z,1463182496.845 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:34:58.863Z,1463182498.863 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:36:11.401Z,1463182571.401 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T23:36:11.807Z,1463182571.807 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-13T23:36:41.851Z,1463182601.851 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:36:59.126Z,1463182619.126 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:37:01.150Z,1463182621.150 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:37:45.631Z,1463182665.631 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:39:01.540Z,1463182741.540 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:39:03.568Z,1463182743.568 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:39:51.401Z,1463182791.401 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:40:46.519Z,1463182846.519 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:41:03.937Z,1463182863.937 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:41:05.961Z,1463182865.961 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:42:52.556Z,1463182972.556 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:43:06.042Z,1463182986.042 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:43:06.532Z,1463182986.532 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-13T23:43:47.669Z,1463183027.669 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:45:07.848Z,1463183107.848 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1401.702734 min 
2016-05-13T23:45:53.564Z,1463183153.564 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:46:48.567Z,1463183208.567 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:48:50.824Z,1463183330.824 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T23:48:54.488Z,1463183334.488 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:49:49.379Z,1463183389.379 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:51:55.322Z,1463183515.322 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:52:50.261Z,1463183570.261 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:53:06.326Z,1463183586.326 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:54:56.594Z,1463183696.594 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:55:06.674Z,1463183706.674 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:55:08.696Z,1463183708.696 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:55:31.582Z,1463183731.582 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1412.097656 min 
2016-05-13T23:55:51.367Z,1463183751.367 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:57:08.891Z,1463183828.891 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:57:10.908Z,1463183830.908 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-13T23:57:57.855Z,1463183877.855 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:58:53.962Z,1463183933.962 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-13T23:59:08.523Z,1463183948.523 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-13T23:59:09.352Z,1463183949.352 [NAL9602](FAULT): LCB fault: LCB Watchdog Reset. Invalid Command.
2016-05-13T23:59:11.240Z,1463183951.240 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-13T23:59:13.262Z,1463183953.262 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:00:59.245Z,1463184059.245 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:01:13.547Z,1463184073.547 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:01:18.376Z,1463184078.376 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:01:54.987Z,1463184114.987 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:03:18.467Z,1463184198.467 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:03:21.059Z,1463184201.059 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T00:04:00.714Z,1463184240.714 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:04:56.042Z,1463184296.042 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:06:15.746Z,1463184375.746 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1422.834896 min 
2016-05-14T00:07:01.940Z,1463184421.940 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:07:56.902Z,1463184476.902 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:09:27.497Z,1463184567.497 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T00:10:02.731Z,1463184602.731 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:10:58.084Z,1463184658.084 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:13:03.575Z,1463184783.575 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:13:19.110Z,1463184799.110 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:13:59.256Z,1463184839.256 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:15:19.329Z,1463184919.329 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:15:21.352Z,1463184921.352 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:16:04.821Z,1463184964.821 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:16:13.488Z,1463184973.488 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T00:16:38.361Z,1463184998.361 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1433.216536 min 
2016-05-14T00:17:00.135Z,1463185020.135 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:17:21.598Z,1463185041.598 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:17:23.623Z,1463185043.623 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:19:05.765Z,1463185145.765 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:19:24.026Z,1463185164.026 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:19:26.127Z,1463185166.127 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:19:50.994Z,1463185190.994 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T00:20:01.220Z,1463185201.220 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:21:26.529Z,1463185286.529 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:21:28.556Z,1463185288.556 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:22:07.051Z,1463185327.051 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:22:18.241Z,1463185338.241 [CBIT](IMPORTANT): Beginning GF scan
2016-05-14T00:23:02.825Z,1463185382.825 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:23:28.761Z,1463185408.761 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:23:30.205Z,1463185410.205 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T00:25:08.078Z,1463185508.078 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:26:04.603Z,1463185564.603 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:27:28.765Z,1463185648.765 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1443.966927 min 
2016-05-14T00:28:09.238Z,1463185689.238 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:29:05.808Z,1463185745.808 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:29:55.159Z,1463185795.159 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T00:30:11.144Z,1463185811.144 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T00:30:11.217Z,1463185811.217 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T00:31:10.129Z,1463185870.129 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:32:06.636Z,1463185926.636 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:33:29.455Z,1463186009.455 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:34:11.514Z,1463186051.514 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:34:26.842Z,1463186066.842 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T00:35:08.109Z,1463186108.109 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:35:29.610Z,1463186129.610 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:35:31.632Z,1463186131.632 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:37:13.108Z,1463186233.108 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:37:31.813Z,1463186251.813 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:37:33.845Z,1463186253.845 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:37:47.371Z,1463186267.371 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1454.356771 min 
2016-05-14T00:38:12.082Z,1463186292.082 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:39:33.994Z,1463186373.994 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:39:36.043Z,1463186376.043 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:40:14.673Z,1463186414.673 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:41:13.221Z,1463186473.221 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:41:36.442Z,1463186496.442 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:41:38.472Z,1463186498.472 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:42:26.019Z,1463186546.019 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T00:43:18.520Z,1463186598.520 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:43:38.819Z,1463186618.819 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:43:39.806Z,1463186619.806 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T00:43:39.901Z,1463186619.901 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T00:44:14.700Z,1463186654.700 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:46:40.137Z,1463186800.137 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:47:15.507Z,1463186835.507 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:48:51.354Z,1463186931.354 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1465.428125 min 
2016-05-14T00:49:41.081Z,1463186981.081 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:50:16.485Z,1463187016.485 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:52:42.049Z,1463187162.049 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:52:45.196Z,1463187165.196 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T00:53:17.332Z,1463187197.332 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:53:39.045Z,1463187219.045 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:55:39.285Z,1463187339.285 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:55:42.549Z,1463187342.549 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:55:42.900Z,1463187342.900 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:56:18.657Z,1463187378.657 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:57:42.752Z,1463187462.752 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:57:48.784Z,1463187468.784 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T00:58:59.802Z,1463187539.802 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:59:19.919Z,1463187559.919 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T00:59:38.867Z,1463187578.867 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1476.219271 min 
2016-05-14T00:59:49.024Z,1463187589.024 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T00:59:51.058Z,1463187591.058 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:01:51.145Z,1463187711.145 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:01:53.168Z,1463187713.168 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:02:01.140Z,1463187721.140 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:02:21.874Z,1463187741.874 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:03:04.475Z,1463187784.475 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T01:03:53.508Z,1463187833.508 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:03:54.741Z,1463187834.741 [Rowe_600LCM](FAULT): LCB fault:  Current Limiter Activated.
2016-05-14T01:04:02.035Z,1463187842.035 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2016-05-14T01:05:07.341Z,1463187907.341 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:05:32.847Z,1463187932.847 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:08:08.208Z,1463188088.208 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:08:42.701Z,1463188122.701 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:10:24.012Z,1463188224.012 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1486.971875 min 
2016-05-14T01:11:10.023Z,1463188270.023 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:11:43.437Z,1463188303.437 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:12:46.398Z,1463188366.398 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T01:13:38.169Z,1463188418.169 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T01:13:53.637Z,1463188433.637 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:14:11.253Z,1463188451.253 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:14:44.650Z,1463188484.650 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:15:53.877Z,1463188553.877 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:15:55.894Z,1463188555.894 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:17:12.579Z,1463188632.579 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:17:46.896Z,1463188666.896 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:17:56.166Z,1463188676.166 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:17:58.204Z,1463188678.204 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:19:58.212Z,1463188798.212 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:20:00.229Z,1463188800.229 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:20:13.377Z,1463188813.377 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:20:48.081Z,1463188848.081 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:21:20.936Z,1463188880.936 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1497.924609 min 
2016-05-14T01:22:00.333Z,1463188920.333 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:22:02.350Z,1463188922.350 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:23:15.011Z,1463188995.011 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:23:48.931Z,1463189028.931 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:23:51.824Z,1463189031.824 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T01:23:59.380Z,1463189039.380 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T01:23:59.442Z,1463189039.442 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T01:24:02.668Z,1463189042.668 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:24:02.799Z,1463189042.799 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T01:26:15.980Z,1463189175.980 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:26:50.204Z,1463189210.204 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:29:16.918Z,1463189356.918 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:29:51.106Z,1463189391.106 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:31:44.085Z,1463189504.085 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1508.307292 min 
2016-05-14T01:32:17.796Z,1463189537.796 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:32:51.954Z,1463189571.954 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:33:19.126Z,1463189599.126 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T01:34:02.920Z,1463189642.920 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:35:19.369Z,1463189719.369 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:36:03.059Z,1463189763.059 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:36:04.798Z,1463189764.798 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:36:05.081Z,1463189765.081 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:36:12.034Z,1463189772.034 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T01:38:05.121Z,1463189885.121 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:38:07.146Z,1463189887.146 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:38:20.425Z,1463189900.425 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:39:05.557Z,1463189945.557 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:40:07.502Z,1463190007.502 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:40:09.520Z,1463190009.520 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:41:22.158Z,1463190082.158 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:42:06.859Z,1463190126.859 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:42:09.860Z,1463190129.860 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:42:11.878Z,1463190131.878 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:42:31.433Z,1463190151.433 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1519.092969 min 
2016-05-14T01:43:54.606Z,1463190234.606 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T01:44:12.136Z,1463190252.136 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:44:12.601Z,1463190252.601 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T01:44:23.454Z,1463190263.454 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:45:08.001Z,1463190308.001 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:46:30.124Z,1463190390.124 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T01:47:24.307Z,1463190444.307 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:48:09.098Z,1463190489.098 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:50:25.346Z,1463190625.346 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:51:09.906Z,1463190669.906 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:53:00.436Z,1463190780.436 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1529.579557 min 
2016-05-14T01:53:26.419Z,1463190806.419 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:54:10.829Z,1463190850.829 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:54:12.827Z,1463190852.827 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:55:11.812Z,1463190911.812 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T01:55:33.646Z,1463190933.646 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T01:56:12.943Z,1463190972.943 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:56:14.956Z,1463190974.956 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:56:27.270Z,1463190987.270 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:56:47.902Z,1463191007.902 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T01:57:28.992Z,1463191048.992 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T01:58:14.989Z,1463191094.989 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T01:58:18.224Z,1463191098.224 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T01:59:29.800Z,1463191169.800 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:00:18.238Z,1463191218.238 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:00:20.262Z,1463191220.262 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:00:30.413Z,1463191230.413 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:02:20.492Z,1463191340.492 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:02:22.515Z,1463191342.515 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:02:30.817Z,1463191350.817 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:03:31.551Z,1463191411.551 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:03:59.142Z,1463191439.142 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1540.552995 min 
2016-05-14T02:04:22.773Z,1463191462.773 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:04:23.245Z,1463191463.245 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T02:05:31.634Z,1463191531.634 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:06:32.992Z,1463191592.992 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:07:41.735Z,1463191661.735 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T02:08:32.726Z,1463191712.726 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:09:33.856Z,1463191773.856 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:09:50.249Z,1463191790.249 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T02:11:33.771Z,1463191893.771 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:12:34.726Z,1463191954.726 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:14:22.991Z,1463192062.991 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:14:26.941Z,1463192066.941 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1551.020964 min 
2016-05-14T02:14:34.779Z,1463192074.779 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:15:37.451Z,1463192137.451 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:16:23.175Z,1463192183.175 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:16:25.229Z,1463192185.229 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:17:43.328Z,1463192263.328 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:18:00.454Z,1463192280.454 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T02:18:00.910Z,1463192280.910 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T02:18:01.439Z,1463192281.439 [NAL9602](FAULT): LCB fault: LCB Watchdog Reset. Invalid Command. Hardware Overcurrent Shutdown.
2016-05-14T02:18:25.444Z,1463192305.444 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:18:27.495Z,1463192307.495 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:18:38.793Z,1463192318.793 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:20:27.802Z,1463192427.802 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:20:29.841Z,1463192429.841 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:20:44.609Z,1463192444.609 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:21:39.851Z,1463192499.851 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:21:43.948Z,1463192503.948 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T02:22:29.939Z,1463192549.939 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:22:31.966Z,1463192551.966 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:23:46.333Z,1463192626.333 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:24:32.317Z,1463192672.317 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:24:33.074Z,1463192673.074 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T02:24:41.126Z,1463192681.126 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:25:12.744Z,1463192712.744 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1561.784896 min 
2016-05-14T02:26:47.477Z,1463192807.477 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:27:42.026Z,1463192862.026 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:29:48.622Z,1463192988.622 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:30:32.433Z,1463193032.433 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T02:30:43.200Z,1463193043.200 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:32:49.617Z,1463193169.617 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:33:44.076Z,1463193224.076 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:34:32.551Z,1463193272.551 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:35:35.542Z,1463193335.542 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1572.168880 min 
2016-05-14T02:35:50.435Z,1463193350.435 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:36:32.844Z,1463193392.844 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:36:34.889Z,1463193394.889 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:36:45.518Z,1463193405.518 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:36:45.809Z,1463193405.809 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-05-14T02:38:35.039Z,1463193515.039 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:38:43.087Z,1463193523.087 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:38:51.446Z,1463193531.446 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:38:51.488Z,1463193531.488 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-05-14T02:40:43.376Z,1463193643.376 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:40:45.802Z,1463193645.802 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:40:51.062Z,1463193651.062 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T02:42:46.177Z,1463193766.177 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:42:48.207Z,1463193768.207 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:44:48.706Z,1463193888.706 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:44:48.781Z,1463193888.781 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T02:46:22.913Z,1463193982.913 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1582.906901 min 
2016-05-14T02:51:20.023Z,1463194280.023 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T02:54:45.942Z,1463194485.942 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:54:50.279Z,1463194490.279 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:56:47.164Z,1463194607.164 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1593.358203 min 
2016-05-14T02:56:50.431Z,1463194610.431 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:56:53.088Z,1463194613.088 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:56:53.246Z,1463194613.246 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:57:47.077Z,1463194667.077 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T02:58:53.514Z,1463194733.514 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T02:58:55.531Z,1463194735.531 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T02:59:58.687Z,1463194798.687 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:00:55.571Z,1463194855.571 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:00:57.588Z,1463194857.588 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:00:57.743Z,1463194857.743 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:01:41.701Z,1463194901.701 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T03:02:57.964Z,1463194977.964 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:02:59.731Z,1463194979.731 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:02:59.986Z,1463194979.986 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:03:58.899Z,1463195038.899 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:05:00.180Z,1463195100.180 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:05:00.429Z,1463195100.429 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T03:06:00.667Z,1463195160.667 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:07:00.042Z,1463195220.042 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:07:36.591Z,1463195256.591 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1604.182943 min 
2016-05-14T03:09:01.594Z,1463195341.594 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:10:01.177Z,1463195401.177 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:12:02.754Z,1463195522.754 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:12:07.036Z,1463195527.036 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T03:12:07.135Z,1463195527.135 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T03:13:02.383Z,1463195582.383 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:15:03.284Z,1463195703.284 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:15:03.561Z,1463195703.561 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:16:10.905Z,1463195770.905 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:17:03.503Z,1463195823.503 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:17:06.338Z,1463195826.338 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:18:00.108Z,1463195880.108 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1614.568620 min 
2016-05-14T03:18:10.551Z,1463195890.551 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:19:06.547Z,1463195946.547 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:19:08.564Z,1463195948.564 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:19:12.128Z,1463195952.128 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:21:08.728Z,1463196068.728 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:21:10.753Z,1463196070.753 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:21:12.226Z,1463196072.226 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:22:13.539Z,1463196133.539 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:23:10.949Z,1463196190.949 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:23:16.973Z,1463196196.973 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:24:13.143Z,1463196253.143 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:24:19.929Z,1463196259.929 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T03:25:14.597Z,1463196314.597 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:25:17.211Z,1463196317.211 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:25:17.403Z,1463196317.403 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T03:27:14.276Z,1463196434.276 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:28:15.244Z,1463196495.244 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:28:46.044Z,1463196526.044 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1625.339974 min 
2016-05-14T03:30:15.203Z,1463196615.203 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:31:16.234Z,1463196676.234 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:33:16.117Z,1463196796.117 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:34:17.116Z,1463196857.116 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:34:39.500Z,1463196879.500 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T03:35:17.522Z,1463196917.522 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:36:19.801Z,1463196979.801 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:37:17.853Z,1463197037.853 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:37:18.657Z,1463197038.657 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:37:19.920Z,1463197039.920 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:39:10.040Z,1463197150.040 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1635.733333 min 
2016-05-14T03:39:20.159Z,1463197160.159 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:39:21.003Z,1463197161.003 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:39:22.177Z,1463197162.177 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:40:20.830Z,1463197220.830 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:41:22.329Z,1463197282.329 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:41:24.362Z,1463197284.362 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:42:20.972Z,1463197340.972 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T03:42:21.874Z,1463197341.874 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:43:21.941Z,1463197401.941 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:43:24.530Z,1463197404.530 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:43:26.557Z,1463197406.557 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:43:51.901Z,1463197431.901 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T03:45:14.063Z,1463197514.063 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T03:45:23.723Z,1463197523.723 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:45:26.795Z,1463197526.795 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:45:27.315Z,1463197527.315 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T03:46:23.111Z,1463197583.111 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:48:25.205Z,1463197705.205 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:49:24.137Z,1463197764.137 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:50:04.137Z,1463197804.137 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1646.641406 min 
2016-05-14T03:51:26.031Z,1463197886.031 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:52:25.120Z,1463197945.120 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:54:27.069Z,1463198067.069 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:55:28.908Z,1463198128.908 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:55:29.073Z,1463198129.073 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:55:32.544Z,1463198132.544 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T03:57:29.251Z,1463198249.251 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:57:31.888Z,1463198251.888 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:57:32.103Z,1463198252.103 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T03:58:36.152Z,1463198316.152 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T03:58:56.974Z,1463198336.974 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T03:59:32.439Z,1463198372.439 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T03:59:34.473Z,1463198374.473 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:00:27.360Z,1463198427.360 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1657.021745 min 
2016-05-14T04:00:42.016Z,1463198442.016 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:01:34.509Z,1463198494.509 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:01:36.530Z,1463198496.530 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:01:37.565Z,1463198497.565 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:03:36.709Z,1463198616.709 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:03:41.560Z,1463198621.560 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:03:43.054Z,1463198623.054 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:04:38.894Z,1463198678.894 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:05:41.847Z,1463198741.847 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:05:42.891Z,1463198742.891 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T04:05:51.157Z,1463198751.157 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T04:05:51.218Z,1463198751.218 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T04:06:44.166Z,1463198804.166 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:07:40.659Z,1463198860.659 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:09:45.352Z,1463198985.352 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:10:41.518Z,1463199041.518 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:10:59.091Z,1463199059.091 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1667.558203 min 
2016-05-14T04:12:46.514Z,1463199166.514 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:13:42.643Z,1463199222.643 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:15:42.489Z,1463199342.489 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:15:47.319Z,1463199347.319 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:16:43.455Z,1463199403.455 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:17:42.805Z,1463199462.805 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:17:47.227Z,1463199467.227 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:18:04.426Z,1463199484.426 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T04:18:57.940Z,1463199537.940 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:19:47.306Z,1463199587.306 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:19:50.126Z,1463199590.126 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:19:54.430Z,1463199594.430 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:21:44.296Z,1463199704.296 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1678.306901 min 
2016-05-14T04:21:50.417Z,1463199710.417 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:21:56.101Z,1463199716.101 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:21:58.725Z,1463199718.725 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:22:55.827Z,1463199775.827 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:23:56.458Z,1463199836.458 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:23:58.478Z,1463199838.478 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:24:20.718Z,1463199860.718 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T04:24:59.665Z,1463199899.665 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:25:21.172Z,1463199921.172 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T04:25:56.843Z,1463199956.843 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:25:58.695Z,1463199958.695 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:25:58.790Z,1463199958.790 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T04:28:01.367Z,1463200081.367 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:28:25.114Z,1463200105.114 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T04:28:57.593Z,1463200137.593 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:31:02.309Z,1463200262.309 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:31:58.527Z,1463200318.527 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:32:04.547Z,1463200324.547 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1688.648177 min 
2016-05-14T04:34:03.231Z,1463200443.231 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:34:59.413Z,1463200499.413 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:35:58.951Z,1463200558.951 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:37:04.215Z,1463200624.215 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:37:59.279Z,1463200679.279 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:38:00.518Z,1463200680.518 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:38:01.317Z,1463200681.317 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:38:43.305Z,1463200723.305 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T04:40:01.464Z,1463200801.464 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:40:03.483Z,1463200803.483 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:40:10.614Z,1463200810.614 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:41:01.400Z,1463200861.400 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:42:03.673Z,1463200923.673 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:42:07.295Z,1463200927.295 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:43:03.541Z,1463200983.541 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1699.630208 min 
2016-05-14T04:43:14.816Z,1463200994.816 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:44:03.217Z,1463201043.217 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:44:07.435Z,1463201047.435 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:44:09.839Z,1463201049.839 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T04:44:10.257Z,1463201050.257 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:44:38.485Z,1463201078.485 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T04:46:10.297Z,1463201170.297 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:46:12.003Z,1463201172.003 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T04:46:16.056Z,1463201176.056 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:47:08.724Z,1463201228.724 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:49:03.314Z,1463201343.314 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T04:49:16.963Z,1463201356.963 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:50:09.450Z,1463201409.450 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:50:49.209Z,1463201449.209 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T04:52:17.808Z,1463201537.808 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:53:10.401Z,1463201590.401 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:53:26.012Z,1463201606.012 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1710.005339 min 
2016-05-14T04:55:18.650Z,1463201718.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:56:10.562Z,1463201770.562 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:56:11.218Z,1463201771.218 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:58:10.861Z,1463201890.861 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T04:58:12.907Z,1463201892.907 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T04:58:19.481Z,1463201899.481 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:59:12.486Z,1463201952.486 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T04:59:22.969Z,1463201962.969 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T04:59:23.379Z,1463201963.379 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T05:00:12.994Z,1463202012.994 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:00:16.624Z,1463202016.624 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:01:26.360Z,1463202086.360 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:02:16.891Z,1463202136.891 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:02:19.711Z,1463202139.711 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:02:23.992Z,1463202143.992 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:04:13.778Z,1463202253.778 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1720.798437 min 
2016-05-14T05:04:19.749Z,1463202259.749 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:04:25.794Z,1463202265.794 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:04:27.492Z,1463202267.492 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:05:25.577Z,1463202325.577 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:06:25.846Z,1463202385.846 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:06:26.222Z,1463202386.222 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T05:07:28.534Z,1463202448.534 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:08:26.732Z,1463202506.732 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:10:29.668Z,1463202629.668 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:11:27.857Z,1463202687.857 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:11:39.965Z,1463202699.965 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T05:13:30.577Z,1463202810.577 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:14:28.695Z,1463202868.695 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:14:36.679Z,1463202876.679 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1731.184245 min 
2016-05-14T05:16:26.138Z,1463202986.138 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:16:31.430Z,1463202991.430 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:17:29.808Z,1463203049.808 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:18:26.432Z,1463203106.432 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:18:28.497Z,1463203108.497 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:19:32.373Z,1463203172.373 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:20:28.805Z,1463203228.805 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:20:30.822Z,1463203230.822 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:20:31.624Z,1463203231.624 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:21:57.484Z,1463203317.484 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T05:22:31.042Z,1463203351.042 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:22:33.059Z,1463203353.059 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:22:33.686Z,1463203353.686 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:22:52.275Z,1463203372.275 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T05:23:32.575Z,1463203412.575 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:24:33.083Z,1463203473.083 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:24:35.117Z,1463203475.117 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:25:31.134Z,1463203531.134 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1741.950521 min 
2016-05-14T05:25:34.450Z,1463203534.450 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:26:34.015Z,1463203594.015 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:26:35.304Z,1463203595.304 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:26:35.724Z,1463203595.724 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T05:28:35.626Z,1463203715.626 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:29:35.341Z,1463203775.341 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:31:36.516Z,1463203896.516 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:32:15.820Z,1463203935.820 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T05:32:36.269Z,1463203956.269 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:34:37.340Z,1463204077.340 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:35:37.082Z,1463204137.082 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:35:54.309Z,1463204154.309 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1752.477214 min 
2016-05-14T05:36:35.653Z,1463204195.653 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:37:38.158Z,1463204258.158 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:38:35.901Z,1463204315.901 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:38:37.916Z,1463204317.916 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:38:38.074Z,1463204318.074 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:40:38.218Z,1463204438.218 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:40:39.081Z,1463204439.081 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:40:40.245Z,1463204440.245 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:41:39.139Z,1463204499.139 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:42:34.892Z,1463204554.892 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T05:42:40.630Z,1463204560.630 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:42:42.647Z,1463204562.647 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:43:39.904Z,1463204619.904 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:44:40.099Z,1463204680.099 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:44:43.023Z,1463204683.023 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:44:45.041Z,1463204685.041 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:46:17.094Z,1463204777.094 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1762.858333 min 
2016-05-14T05:46:40.914Z,1463204800.914 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:46:45.404Z,1463204805.404 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:46:45.732Z,1463204805.732 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T05:47:41.049Z,1463204861.049 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:49:41.759Z,1463204981.759 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:50:41.925Z,1463205041.925 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:52:42.669Z,1463205162.669 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:52:53.503Z,1463205173.503 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T05:52:53.554Z,1463205173.554 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T05:53:42.817Z,1463205222.817 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:55:43.219Z,1463205343.219 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:56:40.029Z,1463205400.029 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1773.239974 min 
2016-05-14T05:56:43.393Z,1463205403.393 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:56:46.062Z,1463205406.062 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:58:46.556Z,1463205526.556 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T05:58:48.288Z,1463205528.288 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T05:58:48.572Z,1463205528.572 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T05:59:51.517Z,1463205591.517 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T05:59:51.577Z,1463205591.577 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:00:48.779Z,1463205648.779 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:00:50.798Z,1463205650.798 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:01:53.170Z,1463205713.170 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:02:51.017Z,1463205771.017 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:02:52.713Z,1463205772.713 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:02:53.036Z,1463205773.036 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:03:43.887Z,1463205823.887 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T06:04:23.167Z,1463205863.167 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T06:04:53.196Z,1463205893.196 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:04:55.327Z,1463205895.327 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:04:55.630Z,1463205895.630 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:05:08.196Z,1463205908.196 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T06:05:59.517Z,1463205959.517 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:06:55.872Z,1463206015.872 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:06:56.383Z,1463206016.383 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T06:07:45.248Z,1463206065.248 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1784.326693 min 
2016-05-14T06:07:55.868Z,1463206075.868 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:09:00.347Z,1463206140.347 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:10:56.668Z,1463206256.668 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:12:01.219Z,1463206321.219 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:13:57.682Z,1463206437.682 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:15:02.245Z,1463206502.245 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:15:28.808Z,1463206528.808 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T06:16:56.531Z,1463206616.531 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:16:58.607Z,1463206618.607 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:17:24.578Z,1463206644.578 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T06:18:03.425Z,1463206683.425 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:18:14.373Z,1463206694.373 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1794.811849 min 
2016-05-14T06:18:56.790Z,1463206736.790 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:18:58.805Z,1463206738.805 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:20:00.519Z,1463206800.519 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:20:59.125Z,1463206859.125 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:21:01.146Z,1463206861.146 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:21:04.404Z,1463206864.404 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:22:53.788Z,1463206973.788 [CBIT](IMPORTANT): Beginning GF scan
2016-05-14T06:23:01.362Z,1463206981.362 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:23:01.431Z,1463206981.431 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:23:03.384Z,1463206983.384 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:24:11.003Z,1463207051.003 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:25:03.757Z,1463207103.757 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:25:05.777Z,1463207105.777 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:25:46.550Z,1463207146.550 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T06:26:02.896Z,1463207162.896 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:27:06.161Z,1463207226.161 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:27:06.191Z,1463207226.191 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T06:27:12.700Z,1463207232.700 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:29:04.152Z,1463207344.152 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:29:15.748Z,1463207355.748 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1805.835938 min 
2016-05-14T06:30:13.526Z,1463207413.526 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:32:05.338Z,1463207525.338 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:32:53.068Z,1463207573.068 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T06:33:14.669Z,1463207594.669 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:35:06.591Z,1463207706.591 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:36:04.718Z,1463207764.718 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T06:36:15.541Z,1463207775.541 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:37:06.787Z,1463207826.787 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:38:07.532Z,1463207887.532 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:39:06.991Z,1463207946.991 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:39:09.017Z,1463207949.017 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:39:16.353Z,1463207956.353 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:39:38.340Z,1463207978.340 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1816.211068 min 
2016-05-14T06:41:08.980Z,1463208068.980 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:41:09.380Z,1463208069.380 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:41:11.398Z,1463208071.398 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:42:17.429Z,1463208137.429 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:43:11.731Z,1463208191.731 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:43:13.753Z,1463208193.753 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:44:09.670Z,1463208249.670 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:45:14.112Z,1463208314.112 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:45:16.948Z,1463208316.948 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:45:18.441Z,1463208318.441 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:46:23.423Z,1463208383.423 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T06:46:23.831Z,1463208383.831 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T06:47:11.346Z,1463208431.346 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:47:17.282Z,1463208437.282 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:47:17.726Z,1463208437.726 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T06:48:26.408Z,1463208506.408 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:50:12.331Z,1463208612.331 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:50:33.932Z,1463208633.932 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1827.137500 min 
2016-05-14T06:51:27.669Z,1463208687.669 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:53:13.254Z,1463208793.254 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:54:28.566Z,1463208868.566 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:56:14.373Z,1463208974.373 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:57:17.553Z,1463209037.553 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T06:57:29.906Z,1463209049.906 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:58:44.251Z,1463209124.251 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T06:59:15.273Z,1463209155.273 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T06:59:17.656Z,1463209157.656 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T06:59:19.678Z,1463209159.678 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:00:31.289Z,1463209231.289 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:00:56.027Z,1463209256.027 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1837.511198 min 
2016-05-14T07:01:19.754Z,1463209279.754 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:01:21.767Z,1463209281.767 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:02:16.691Z,1463209336.691 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:03:21.906Z,1463209401.906 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:03:23.925Z,1463209403.925 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:03:32.442Z,1463209412.442 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:05:18.079Z,1463209518.079 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:05:24.128Z,1463209524.128 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:05:26.155Z,1463209526.155 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:06:36.232Z,1463209596.232 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:07:26.485Z,1463209646.485 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:07:26.904Z,1463209646.904 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T07:08:19.582Z,1463209699.582 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:09:10.027Z,1463209750.027 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T07:09:37.262Z,1463209777.262 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:11:20.384Z,1463209880.384 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:11:44.835Z,1463209904.835 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1848.272005 min 
2016-05-14T07:12:38.143Z,1463209958.143 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:14:21.594Z,1463210061.594 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:15:39.319Z,1463210139.319 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:17:22.373Z,1463210242.373 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:17:27.112Z,1463210247.112 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:18:40.671Z,1463210320.671 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:19:27.299Z,1463210367.299 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:19:29.322Z,1463210369.322 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:19:29.407Z,1463210369.407 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T07:20:23.465Z,1463210423.465 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:21:29.660Z,1463210489.660 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:21:31.703Z,1463210491.703 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:21:42.434Z,1463210502.434 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:22:08.713Z,1463210528.713 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1858.719141 min 
2016-05-14T07:23:24.633Z,1463210604.633 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:23:31.946Z,1463210611.946 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:23:33.973Z,1463210613.973 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:24:43.171Z,1463210683.171 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:25:34.060Z,1463210734.060 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:25:36.078Z,1463210736.078 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:26:25.596Z,1463210785.596 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:27:36.166Z,1463210856.166 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:27:36.426Z,1463210856.426 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T07:27:44.017Z,1463210864.017 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:29:26.535Z,1463210966.535 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:29:47.026Z,1463210987.026 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T07:30:44.846Z,1463211044.846 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:32:27.406Z,1463211147.406 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:32:31.474Z,1463211151.474 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1869.095964 min 
2016-05-14T07:33:46.048Z,1463211226.048 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:35:28.222Z,1463211328.222 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:36:47.296Z,1463211407.296 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:37:36.442Z,1463211456.442 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:38:17.172Z,1463211497.172 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T07:38:29.940Z,1463211509.940 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:39:36.598Z,1463211576.598 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:39:38.633Z,1463211578.633 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:39:48.471Z,1463211588.471 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:40:05.183Z,1463211605.183 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T07:40:05.602Z,1463211605.602 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T07:41:31.456Z,1463211691.456 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:41:38.873Z,1463211698.873 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:41:40.890Z,1463211700.890 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:42:50.587Z,1463211770.587 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:43:08.057Z,1463211788.057 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1879.706380 min 
2016-05-14T07:43:41.132Z,1463211821.132 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:43:43.153Z,1463211823.153 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:44:33.479Z,1463211873.479 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:45:43.210Z,1463211943.210 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:45:45.232Z,1463211945.232 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:45:52.100Z,1463211952.100 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:47:35.754Z,1463212055.754 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:47:45.625Z,1463212065.625 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:47:46.065Z,1463212066.065 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T07:48:53.248Z,1463212133.248 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:50:36.842Z,1463212236.842 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:51:54.188Z,1463212314.188 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:52:25.783Z,1463212345.783 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T07:53:21.982Z,1463212401.982 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T07:53:30.827Z,1463212410.827 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1890.085547 min 
2016-05-14T07:53:37.757Z,1463212417.757 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:54:55.109Z,1463212495.109 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:54:55.137Z,1463212495.137 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-05-14T07:56:38.933Z,1463212598.933 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T07:56:38.945Z,1463212598.945 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-05-14T07:57:45.902Z,1463212665.902 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T07:58:27.344Z,1463212707.344 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T07:59:46.197Z,1463212786.197 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T07:59:48.216Z,1463212788.216 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:01:48.420Z,1463212908.420 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:01:50.446Z,1463212910.446 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:02:48.598Z,1463212968.598 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T08:03:50.495Z,1463213030.495 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:03:52.540Z,1463213032.540 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:04:15.528Z,1463213055.528 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1900.827474 min 
2016-05-14T08:05:52.970Z,1463213152.970 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:05:55.012Z,1463213155.012 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:07:55.227Z,1463213275.227 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:07:55.556Z,1463213275.556 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T08:12:56.112Z,1463213576.112 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:13:07.585Z,1463213587.585 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T08:14:37.782Z,1463213677.782 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1911.202344 min 
2016-05-14T08:14:41.423Z,1463213681.423 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:15:56.861Z,1463213756.861 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:17:42.027Z,1463213862.027 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:17:55.942Z,1463213875.942 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:18:58.049Z,1463213938.049 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:19:56.172Z,1463213996.172 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:19:59.389Z,1463213999.389 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:20:43.395Z,1463214043.395 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:21:59.256Z,1463214119.256 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:21:59.621Z,1463214119.621 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:22:01.659Z,1463214121.659 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:23:26.309Z,1463214206.309 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T08:23:44.531Z,1463214224.531 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:24:01.966Z,1463214241.966 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:24:04.008Z,1463214244.008 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:24:13.931Z,1463214253.931 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T08:25:00.527Z,1463214300.527 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:25:07.165Z,1463214307.165 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1921.695964 min 
2016-05-14T08:26:04.299Z,1463214364.299 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:26:06.318Z,1463214366.318 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:26:45.865Z,1463214405.865 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:28:01.726Z,1463214481.726 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:28:06.399Z,1463214486.399 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:28:06.833Z,1463214486.833 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T08:29:47.209Z,1463214587.209 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:30:48.094Z,1463214648.094 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T08:31:03.323Z,1463214663.323 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:32:48.185Z,1463214768.185 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:33:45.861Z,1463214825.861 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T08:33:45.894Z,1463214825.894 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T08:34:04.287Z,1463214844.287 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:35:29.647Z,1463214929.647 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1932.066667 min 
2016-05-14T08:35:49.408Z,1463214949.408 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:36:26.963Z,1463214986.963 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T08:37:05.156Z,1463215025.156 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:38:06.711Z,1463215086.711 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:38:55.472Z,1463215135.472 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:40:06.177Z,1463215206.177 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:40:06.990Z,1463215206.990 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:40:09.012Z,1463215209.012 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:41:56.773Z,1463215316.773 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:42:09.051Z,1463215329.051 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:42:11.078Z,1463215331.078 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:43:07.604Z,1463215387.604 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:44:11.185Z,1463215451.185 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:44:13.208Z,1463215453.208 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:44:58.627Z,1463215498.627 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:45:58.919Z,1463215558.919 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T08:46:09.146Z,1463215569.146 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:46:13.711Z,1463215573.711 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:46:17.734Z,1463215577.734 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1942.820443 min 
2016-05-14T08:46:18.148Z,1463215578.148 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T08:46:43.872Z,1463215603.872 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T08:47:13.820Z,1463215633.820 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T08:47:59.720Z,1463215679.720 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:48:18.369Z,1463215698.369 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T08:48:20.852Z,1463215700.852 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T08:49:10.516Z,1463215750.516 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:51:00.881Z,1463215860.881 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T08:51:01.330Z,1463215861.330 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:52:11.638Z,1463215931.638 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:54:02.327Z,1463216042.327 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:55:12.486Z,1463216112.486 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:56:20.284Z,1463216180.284 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T08:56:41.923Z,1463216201.923 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1953.271484 min 
2016-05-14T08:57:03.388Z,1463216223.388 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:58:13.532Z,1463216293.532 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T08:58:19.039Z,1463216299.039 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:00:04.570Z,1463216404.570 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:00:19.389Z,1463216419.389 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:00:21.413Z,1463216421.413 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:01:14.686Z,1463216474.686 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:02:21.611Z,1463216541.611 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:02:24.439Z,1463216544.439 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:03:05.923Z,1463216585.923 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:04:16.259Z,1463216656.259 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:04:24.494Z,1463216664.494 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:04:28.961Z,1463216668.961 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:06:07.435Z,1463216767.435 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:06:28.964Z,1463216788.964 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:06:31.791Z,1463216791.791 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:06:38.058Z,1463216798.058 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T09:07:18.153Z,1463216838.153 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:07:26.237Z,1463216846.237 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1964.003516 min 
2016-05-14T09:08:31.964Z,1463216911.964 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:08:37.569Z,1463216917.569 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T09:09:08.416Z,1463216948.416 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:10:19.434Z,1463217019.434 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:12:09.332Z,1463217129.332 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:13:20.239Z,1463217200.239 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:15:10.456Z,1463217310.456 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:16:21.388Z,1463217381.388 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:16:57.506Z,1463217417.506 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T09:17:48.788Z,1463217468.788 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1974.385026 min 
2016-05-14T09:18:11.660Z,1463217491.660 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:18:32.223Z,1463217512.223 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:19:22.583Z,1463217562.583 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:20:32.495Z,1463217632.495 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:20:34.535Z,1463217634.535 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:21:13.007Z,1463217673.007 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:22:24.374Z,1463217744.374 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:22:34.861Z,1463217754.861 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:22:36.892Z,1463217756.892 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:24:14.827Z,1463217854.827 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:24:37.155Z,1463217877.155 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:24:39.197Z,1463217879.197 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:25:25.746Z,1463217925.746 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:26:39.565Z,1463217999.565 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:26:41.583Z,1463218001.583 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:27:14.906Z,1463218034.906 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T09:27:14.941Z,1463218034.941 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T09:27:15.721Z,1463218035.721 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:28:27.374Z,1463218107.374 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:28:31.473Z,1463218111.473 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1985.095833 min 
2016-05-14T09:28:41.729Z,1463218121.729 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:28:42.288Z,1463218122.288 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T09:30:17.263Z,1463218217.263 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:31:28.229Z,1463218288.229 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:33:18.108Z,1463218398.108 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:34:29.106Z,1463218469.106 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:36:19.044Z,1463218579.044 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:37:30.062Z,1463218650.062 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:38:41.987Z,1463218721.987 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:38:57.650Z,1463218737.650 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1995.531510 min 
2016-05-14T09:39:20.261Z,1463218760.261 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:39:28.272Z,1463218768.272 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T09:40:31.586Z,1463218831.586 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:40:42.048Z,1463218842.048 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:40:44.077Z,1463218844.077 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:42:21.685Z,1463218941.685 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:42:44.381Z,1463218964.381 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:42:46.398Z,1463218966.398 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:43:32.725Z,1463219012.725 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:44:46.542Z,1463219086.542 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:44:48.959Z,1463219088.959 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:45:23.578Z,1463219123.578 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:46:34.095Z,1463219194.095 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:46:49.123Z,1463219209.123 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:46:51.137Z,1463219211.137 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T09:48:24.948Z,1463219304.948 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:48:51.338Z,1463219331.338 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T09:48:56.535Z,1463219336.535 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T09:49:35.381Z,1463219375.381 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:49:42.584Z,1463219382.584 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2006.282292 min 
2016-05-14T09:49:48.250Z,1463219388.250 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T09:51:26.402Z,1463219486.402 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:52:36.489Z,1463219556.489 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:54:27.195Z,1463219667.195 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:55:37.505Z,1463219737.505 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:57:28.067Z,1463219848.067 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:58:38.605Z,1463219918.605 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T09:58:51.587Z,1463219931.587 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:00:05.321Z,1463220005.321 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2016.660286 min 
2016-05-14T10:00:16.939Z,1463220016.939 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T10:00:29.154Z,1463220029.154 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:00:51.807Z,1463220051.807 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:00:53.837Z,1463220053.837 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:01:39.542Z,1463220099.542 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:02:54.127Z,1463220174.127 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:02:56.150Z,1463220176.150 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:03:30.581Z,1463220210.581 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:04:40.689Z,1463220280.689 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:04:56.457Z,1463220296.457 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:04:58.483Z,1463220298.483 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:06:31.968Z,1463220391.968 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:06:58.903Z,1463220418.903 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:07:00.957Z,1463220420.957 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:07:42.896Z,1463220462.896 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:09:01.103Z,1463220541.103 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:09:01.501Z,1463220541.501 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T10:09:32.757Z,1463220572.757 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:10:36.825Z,1463220636.825 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T10:10:44.050Z,1463220644.050 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:10:46.051Z,1463220646.051 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2027.340104 min 
2016-05-14T10:12:33.834Z,1463220753.834 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:13:45.175Z,1463220825.175 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:15:34.912Z,1463220934.912 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:16:46.274Z,1463221006.274 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:18:35.781Z,1463221115.781 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:19:01.759Z,1463221141.759 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:19:47.456Z,1463221187.456 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:20:54.203Z,1463221254.203 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T10:20:54.626Z,1463221254.626 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T10:21:01.930Z,1463221261.930 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:21:03.952Z,1463221263.952 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:21:08.162Z,1463221268.162 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2037.706901 min 
2016-05-14T10:21:37.094Z,1463221297.094 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:22:48.893Z,1463221368.893 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:23:04.336Z,1463221384.336 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:23:06.358Z,1463221386.358 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:24:37.958Z,1463221477.958 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:25:06.751Z,1463221506.751 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:25:08.772Z,1463221508.772 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:25:50.786Z,1463221550.786 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:27:08.970Z,1463221628.970 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:27:10.989Z,1463221630.989 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:27:39.084Z,1463221659.084 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:28:52.250Z,1463221732.250 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:29:11.239Z,1463221751.239 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:29:11.732Z,1463221751.732 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T10:30:40.721Z,1463221840.721 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:31:53.623Z,1463221913.623 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:31:54.065Z,1463221914.065 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2048.472917 min 
2016-05-14T10:33:06.134Z,1463221986.134 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T10:33:41.761Z,1463222021.761 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:34:54.623Z,1463222094.623 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:36:42.957Z,1463222202.957 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:37:57.995Z,1463222277.995 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:39:11.562Z,1463222351.562 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:39:44.244Z,1463222384.244 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:40:59.348Z,1463222459.348 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:41:11.733Z,1463222471.733 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:41:13.780Z,1463222473.780 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:42:16.505Z,1463222536.505 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2058.847135 min 
2016-05-14T10:42:45.299Z,1463222565.299 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:43:13.807Z,1463222593.807 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:43:15.837Z,1463222595.837 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:43:23.963Z,1463222603.963 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T10:44:01.566Z,1463222641.566 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:45:16.110Z,1463222716.110 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:45:20.931Z,1463222720.931 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:45:47.029Z,1463222747.029 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:47:03.450Z,1463222823.450 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:47:21.323Z,1463222841.323 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:47:27.756Z,1463222847.756 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T10:48:48.070Z,1463222928.070 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:49:27.908Z,1463222967.908 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T10:49:28.308Z,1463222968.308 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T10:50:04.526Z,1463223004.526 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:51:49.447Z,1463223109.447 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:52:59.191Z,1463223179.191 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2069.559115 min 
2016-05-14T10:53:05.656Z,1463223185.656 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:53:44.433Z,1463223224.433 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T10:54:50.542Z,1463223290.542 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:56:06.715Z,1463223366.715 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:57:51.646Z,1463223471.646 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:59:07.716Z,1463223547.716 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T10:59:28.257Z,1463223568.257 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:00:52.849Z,1463223652.849 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:01:28.340Z,1463223688.340 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:01:30.382Z,1463223690.382 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:02:08.966Z,1463223728.966 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:03:21.904Z,1463223801.904 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2079.932292 min 
2016-05-14T11:03:30.628Z,1463223810.628 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:03:32.655Z,1463223812.655 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:03:53.802Z,1463223833.802 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:04:07.239Z,1463223847.239 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T11:05:10.700Z,1463223910.700 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:05:32.888Z,1463223932.888 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:05:34.918Z,1463223934.918 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:06:54.911Z,1463224014.911 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:07:35.053Z,1463224055.053 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:07:37.071Z,1463224057.071 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:08:11.539Z,1463224091.539 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:09:37.075Z,1463224177.075 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:09:37.570Z,1463224177.570 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T11:09:56.436Z,1463224196.436 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:11:12.792Z,1463224272.792 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:12:57.393Z,1463224377.393 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:14:06.387Z,1463224446.387 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2090.679688 min 
2016-05-14T11:14:13.728Z,1463224453.728 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:14:36.883Z,1463224476.883 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T11:14:36.943Z,1463224476.943 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T11:15:58.569Z,1463224558.569 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:17:14.784Z,1463224634.784 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:18:59.719Z,1463224739.719 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:19:37.368Z,1463224777.368 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:20:15.973Z,1463224815.973 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:21:37.479Z,1463224897.479 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:21:39.501Z,1463224899.501 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:22:00.915Z,1463224920.915 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:23:18.025Z,1463224998.025 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:23:39.889Z,1463225019.889 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:23:41.906Z,1463225021.906 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:24:29.041Z,1463225069.041 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2101.052083 min 
2016-05-14T11:25:02.095Z,1463225102.095 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:25:42.259Z,1463225142.259 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:25:45.883Z,1463225145.883 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:26:19.280Z,1463225179.280 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:26:50.309Z,1463225210.309 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T11:27:46.063Z,1463225266.063 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:27:48.084Z,1463225268.084 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:28:03.301Z,1463225283.301 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:29:20.025Z,1463225360.025 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:29:48.327Z,1463225388.327 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:29:54.584Z,1463225394.584 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T11:31:04.343Z,1463225464.343 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:32:21.991Z,1463225541.991 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:34:05.231Z,1463225645.231 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:35:16.019Z,1463225716.019 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2111.840234 min 
2016-05-14T11:35:22.928Z,1463225722.928 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:37:06.280Z,1463225826.280 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:37:11.010Z,1463225831.010 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T11:38:24.012Z,1463225904.012 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:39:48.622Z,1463225988.622 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:40:07.315Z,1463226007.315 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:41:25.673Z,1463226085.673 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:41:48.878Z,1463226108.878 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:41:50.895Z,1463226110.895 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:43:08.653Z,1463226188.653 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:43:50.963Z,1463226230.963 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:43:52.992Z,1463226232.992 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:44:27.600Z,1463226267.600 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:45:53.014Z,1463226353.014 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:45:58.239Z,1463226358.239 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:46:09.526Z,1463226369.526 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:46:33.656Z,1463226393.656 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2123.137500 min 
2016-05-14T11:47:29.225Z,1463226449.225 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:47:31.088Z,1463226451.088 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T11:47:58.382Z,1463226478.382 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:48:00.400Z,1463226480.400 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T11:49:11.068Z,1463226551.068 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:50:00.471Z,1463226600.471 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T11:50:01.026Z,1463226601.026 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T11:50:31.125Z,1463226631.125 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:52:12.267Z,1463226732.267 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:53:32.294Z,1463226812.294 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:55:13.314Z,1463226913.314 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:56:33.451Z,1463226993.451 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:57:02.255Z,1463227022.255 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2133.609896 min 
2016-05-14T11:58:13.977Z,1463227093.977 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T11:58:14.490Z,1463227094.490 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T11:59:34.354Z,1463227174.354 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:00:01.137Z,1463227201.137 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T12:01:23.299Z,1463227283.299 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:02:01.228Z,1463227321.228 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T12:02:03.247Z,1463227323.247 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T12:02:35.410Z,1463227355.410 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:04:03.397Z,1463227443.397 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T12:04:10.648Z,1463227450.648 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T12:04:24.575Z,1463227464.575 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:05:37.758Z,1463227537.758 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:06:10.998Z,1463227570.998 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T12:06:16.624Z,1463227576.624 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T12:07:34.654Z,1463227654.654 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:08:04.793Z,1463227684.793 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2144.654557 min 
2016-05-14T12:08:16.998Z,1463227696.998 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T12:08:21.838Z,1463227701.838 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T12:08:31.189Z,1463227711.189 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T12:08:31.291Z,1463227711.291 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-05-14T12:08:39.788Z,1463227719.788 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:10:21.880Z,1463227821.880 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T12:10:26.536Z,1463227826.536 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T12:10:35.806Z,1463227835.806 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:11:41.275Z,1463227901.275 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:13:37.344Z,1463228017.344 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:14:46.439Z,1463228086.439 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:16:38.126Z,1463228198.126 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:17:51.198Z,1463228271.198 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:18:40.906Z,1463228320.906 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2155.254427 min 
2016-05-14T12:19:39.217Z,1463228379.217 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:20:22.159Z,1463228422.159 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T12:21:00.814Z,1463228460.814 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:21:02.200Z,1463228462.200 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T12:22:22.542Z,1463228542.542 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T12:22:24.560Z,1463228544.560 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T12:22:40.409Z,1463228560.409 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:23:41.780Z,1463228621.780 [CBIT](IMPORTANT): Beginning GF scan
2016-05-14T12:24:19.465Z,1463228659.465 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:24:24.948Z,1463228664.948 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T12:24:34.578Z,1463228674.578 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T12:25:14.252Z,1463228714.252 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T12:25:41.317Z,1463228741.317 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:26:34.977Z,1463228794.977 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T12:26:37.396Z,1463228797.396 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T12:27:22.080Z,1463228842.080 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:28:37.467Z,1463228917.467 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T12:28:39.494Z,1463228919.494 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T12:28:42.360Z,1463228922.360 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:30:22.263Z,1463229022.263 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2166.940755 min 
2016-05-14T12:30:39.556Z,1463229039.556 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T12:30:42.085Z,1463229042.085 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-05-14T12:30:52.000Z,1463229053.000 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:31:22.115Z,1463229082.115 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T12:31:43.372Z,1463229103.372 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:33:54.108Z,1463229234.108 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:34:20.079Z,1463229260.079 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T12:34:44.449Z,1463229284.449 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:36:55.173Z,1463229415.173 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:37:45.350Z,1463229465.350 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:39:56.147Z,1463229596.147 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:40:39.934Z,1463229639.934 [Rowe_600LCM](IMPORTANT): LCM not connected
2016-05-14T12:40:45.669Z,1463229645.669 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-05-14T12:40:46.523Z,1463229646.523 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-05-14T12:40:57.173Z,1463229657.173 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2177.520052 min 
2016-05-14T12:41:43.819Z,1463229703.819 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-05-14T12:42:40.154Z,1463229760.154 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-05-14T12:42:42.172Z,1463229762.172 [Rowe_600LCM](IMPORTANT): LCM not connected