makai Path

trajectory

20180823T171022 [SBIT]:Beginning Startup BIT

20180823T171022 [CBIT]:Beginning ground fault scan

20180823T171116 [CommandLine]:got command configSet list

20180823T171116 [CommandLine]:Listing configuration overrides from Data/persisted.cfg

20180823T171116 [CommandLine]:AcousticModem_Benthos_ATM900.loadAtStartup=0 bool;#

20180823T171116 [CommandLine]:CTD_Seabird.minSalinityBound=0.1 practical_salinity_unit;#

20180823T171116 [CommandLine]:Depth_Keller.offset=-0.56 decibar;#

20180823T171116 [CommandLine]:Express linearApproximation mass_concentration_of_chlorophyll_in_sea_water 1.000000 microgram_per_liter;#

20180823T171116 [CommandLine]:IBIT.batteryHibernationTimeout=1 minute;#

20180823T171116 [CommandLine]:IBIT.batteryMissingStickThreshold=12 count;#

20180823T171116 [CommandLine]:VerticalControl.buoyancyNeutral=200 cubic_centimeter;#

20180823T171116 [CommandLine]:VerticalControl.massDefault=-1 centimeter;#

20180823T171116 [MissionManager]:Started mission Startup

20180823T171154 [NAL9602]:Failed to initiate SBD session. Error code: 2

20180823T171311 [MissionManager]:Started mission Default

20180823T171426 [CommandLine]:got command configSet list

20180823T171426 [CommandLine]:Listing configuration overrides from Data/persisted.cfg

20180823T171426 [CommandLine]:AcousticModem_Benthos_ATM900.loadAtStartup=0 bool;#

20180823T171426 [CommandLine]:CTD_Seabird.minSalinityBound=0.1 practical_salinity_unit;#

20180823T171426 [CommandLine]:Depth_Keller.offset=-0.56 decibar;#

20180823T171426 [CommandLine]:Express linearApproximation mass_concentration_of_chlorophyll_in_sea_water 1.000000 microgram_per_liter;#

20180823T171426 [CommandLine]:IBIT.batteryHibernationTimeout=1 minute;#

20180823T171426 [CommandLine]:IBIT.batteryMissingStickThreshold=12 count;#

20180823T171426 [CommandLine]:VerticalControl.buoyancyNeutral=200 cubic_centimeter;#

20180823T171426 [CommandLine]:VerticalControl.massDefault=-1 centimeter;#

20180823T171436 [CommandLine]:got command report touch height_above_sea_floor

20180823T171502 [CommandLine]:got command report clear

20180823T171504 [CommandLine]:got command get depth

20180823T171511 [CommandLine]:got command get Depth_Keller.offset

20180823T171511 [CommandLine]:Depth_Keller.offset -0.560000 db

20180823T171852 [BPC1]:Bank A: No match for stick 5 serial number:1717 in the onboard configuration file.

20180823T171852 [BPC1]:Failed to parse Bank A battery data

20180823T171909 [Default:CheckIn:E]:Default mission has been running for 5.969812 min

20180823T172222 [CommandLine]:got command configSet VerticalControl.buoyancyNeutral 380.000000 cubic_centimeter persist

20180823T172228 [CommandLine]:got command ibit

20180823T172228 [IBIT]:Beginning Initiated BIT

20180823T172228 [IBIT]:Beginning control surface checks.

20180823T172228 [CBIT]:Beginning ground fault scan

20180823T172237 [CommandLine]:got command report touch height_above_sea_floor

20180823T172301 [NAL9602]:Failed to initiate SBD session. Error code: 2

20180823T172319 [NAL9602]:Failed to initiate SBD session. Error code: 2

20180823T172419 [IBIT]:Error acquiring IBIT communications status. Timeout expired.

20180823T172420 [IBIT]:Warning: Battery Data not active. Expected only when running primaries. Threshold checking not active.

20180823T172420 [IBIT]:bitPressureThreshold: 0.750000 psi

20180823T172510 [CommandLine]:got command report clear

20180823T172512 [Default:CheckIn:E]:Default mission has been running for 12.014939 min

20180823T172521 [CommandLine]:got command ibit

20180823T172521 [IBIT]:Beginning Initiated BIT

20180823T172521 [IBIT]:Beginning control surface checks.

20180823T172521 [CBIT]:Beginning ground fault scan

20180823T172607 [IBIT]:Communications Status:#Fix Status: 1#Iridium Signal Strength: 3#Latitude: 41.827312 Longitude: -83.413078

20180823T172607 [IBIT]:Warning: Battery Data not active. Expected only when running primaries. Threshold checking not active.

20180823T172608 [IBIT]:bitPressureThreshold: 0.750000 psi

20180823T173007 [BPC1]:Bank A: No match for stick 2 serial number:1717 in the onboard configuration file.

20180823T173007 [BPC1]:Failed to parse Bank A battery data

20180823T173023 [BPC1]:Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks.

20180823T173023 [CBIT]:Data Fault in component: BPC1

20180823T173203 [Default:CheckIn:E]:Default mission has been running for 18.861251 min

20180823T174020 [BPC1]:Bank A: No match for stick 0 serial number:1717 in the onboard configuration file.

20180823T174020 [BPC1]:Failed to parse Bank A battery data

20180823T174257 [Rowe_600LCM]:Did not receive valid device response within the specified allowable sample time.

20180823T174257 [Rowe_600LCM]:Communications Fault

20180823T174258 [CBIT]:Communications Fault in component: Rowe_600LCM

20180823T174500 [Rowe_600LCM]:Did not receive valid device response within the specified allowable sample time.

20180823T174500 [Rowe_600LCM]:Communications Fault

20180823T174500 [CBIT]:Communications Fault in component: Rowe_600LCM

20180823T174639 [BPC1]:Failed to receive data from both battery packs

20180823T174639 [BPC1]:Communications Fault

20180823T174639 [CBIT]:Communications Fault in component: BPC1

20180823T174703 [Rowe_600LCM]:Did not receive valid device response within the specified allowable sample time.

20180823T174703 [Rowe_600LCM]:Communications Fault

20180823T174703 [CBIT]:Communications Fault in component: Rowe_600LCM

20180823T181324 [BPC1]:Failed to receive data from both battery packs

20180823T181324 [BPC1]:Communications Fault

20180823T181324 [CBIT]:Communications Fault in component: BPC1

20180823T184219 [PNI_TCM]:Failed to acquire valid data within timeout.

20180823T184219 [CBIT]:Data Fault in component: PNI_TCM

20180823T190348 [CommandLine]:got command configSet Express linearApproximation height_above_sea_floor 2.000000 meter persist

20180823T190731 [BPC1]:Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks.

20180823T190731 [CBIT]:Data Fault in component: BPC1

20180823T192046 [PNI_TCM]:Failed to acquire valid data within timeout.

20180823T192046 [CBIT]:Data Fault in component: PNI_TCM

20180823T192047 [PNI_TCM]:LCB fault: Software Overcurrent.

20180823T192047 [PNI_TCM]:Hardware Fault

20180823T192834 [BPC1]:Failed to receive data from all sticks prior to timeout. Missing data from 15 sticks.

20180823T192834 [CBIT]:Data Fault in component: BPC1