makai Path

trajectory

20180727T232227 [MissionManager]:Started mission Default

20180727T232336 [CommandLine]:got command schedule asap "load Maintenance/sample.xml;set sample.MissionTimeout 4 hour;set sample.Depth 2 meter;set sample.NumberOfSamples 2 count;set sample.WaitBeforeSample 3 second;set sample:SampleAtDepth.TargetDepth 2 meter" 220ph 1 2.000000

20180727T232336 [CommandLine]:Scheduling command #1 of 2 with id=220ph

20180727T232336 [CommandLine]:Scheduled #1 (#1 of 2 with id='220ph'): "load Maintenance/sample.xml;set sample.MissionTimeout 4 hour;set sample.Depth 2 meter;set sample.NumberOfSamples 2 count;set sample.WaitBeforeSample 3 second;set sample:SampleAtDepth.TargetDepth 2 meter" ASAP

20180727T232341 [CommandLine]:got command schedule asap "set sample:SampleAtDepth.SettleTime 10 second;run " 220ph 2 2.000000

20180727T232341 [CommandLine]:Scheduling command #2 of 2 with id=220ph

20180727T232341 [CommandLine]:Scheduled #2 (#2 of 2 with id='220ph'): "set sample:SampleAtDepth.SettleTime 10 second;run " ASAP

20180727T232341 [CommandLine]:got command load ./Missions/Maintenance/sample.xml

20180727T232342 [MissionManager]:Slate does not contain CTD_NeilBrown.bin_mean_sea_water_temperature

20180727T232342 [MissionManager]:Slate does not contain celsius

20180727T232342 [CommandLine]:Loaded ./Missions/Maintenance/sample.xml

20180727T232350 [CommandLine]:got command set sample.MissionTimeout 4.000000 hour

20180727T232350 [CommandLine]:got command set sample.Depth 2.000000 meter

20180727T232350 [CommandLine]:got command set sample.NumberOfSamples 2.000000 count

20180727T232350 [CommandLine]:got command set sample.WaitBeforeSample 3.000000 second

20180727T232350 [CommandLine]:got command set sample:SampleAtDepth.TargetDepth 2.000000 meter

20180727T232353 [CommandLine]:got command set sample:SampleAtDepth.SettleTime 10.000000 second

20180727T232353 [CommandLine]:got command run

20180727T232353 [CommandLine]:Running

20180727T232353 [MissionManager]:Started mission sample

20180727T232401 [CommandLine]:got command maintain sensor Depth_Keller.depth 2.000000 meter

20180727T232407 [ESPComponent]:Error opening console port: cannot open serial port

20180727T232407 [ESPComponent]:Communications Fault

20180727T232408 [CBIT]:Communications Fault in component: ESPComponent

20180727T232408 [ESPComponent]:No ESP summary messages in queue.

20180727T232409 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20180727T232417 [CommandLine]:got command stop

20180727T232417 [CommandLine]:Scheduling is paused

20180727T232418 [MissionManager]:Started mission Default

20180727T232418 [ESPComponent]:No ESP summary messages in queue.

20180727T232419 [CommandLine]:got command maintain clear

20180727T232907 [NAL9602]:GPS failed to acquire within timeout.

20180727T232907 [CBIT]:Data Fault in component: NAL9602

20180727T233508 [Default:CheckIn:E]:Default mission has been running for 10.833867 min

20180727T234022 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20180727T234525 [Default:CheckIn:E]:Default mission has been running for 21.116884 min

20180727T234540 [NAL9602]:GPS failed to acquire within timeout.

20180727T234541 [CBIT]:Data Fault in component: NAL9602

20180727T235129 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20180727T235549 [Default:CheckIn:E]:Default mission has been running for 31.459953 min

20180727T235632 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20180727T235632 [CBIT]:Data Fault in component: NAL9602

20180727T235714 [NAL9602]:GPS failed to acquire within timeout.

20180728T000655 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20180728T001647 [CommandLine]:Scheduling is paused

20180728T002739 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20180728T023204 [NAL9602]:Failed to initiate SBD session. Error code: 2

20180728T023225 [NAL9602]:Failed to initiate SBD session. Error code: 2

20180728T030730 [NAL9602]:Failed to initiate SBD session. Error code: 2

20180728T051942 [CBIT]:Beginning ground fault scan

20180728T064133 [BPC1]:Failed to receive data from both battery packs

20180728T064133 [BPC1]:Communications Fault

20180728T064133 [CBIT]:Communications Fault in component: BPC1

20180728T111953 [CBIT]:Beginning ground fault scan

20180728T120420 [BPC1]:Failed to receive data from both battery packs

20180728T120420 [BPC1]:Communications Fault

20180728T120420 [CBIT]:Communications Fault in component: BPC1

20180728T172004 [CBIT]:Beginning ground fault scan

20180729T084127 [BPC1]:Failed to receive data from both battery packs

20180729T084127 [BPC1]:Communications Fault

20180729T084127 [CBIT]:Communications Fault in component: BPC1

20180729T141731 [BPC1]:Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks.

20180729T141731 [CBIT]:Data Fault in component: BPC1

20180729T141846 [BPC1]:Failed to parse Bank B battery data

20180730T010526 [Default:D]:Restarting logs and Default mission.