makai Path

trajectory

20150521T031929 [BPC1]:Failed to receive battery data

20150521T031929 [BPC1]:Communications Fault

20150521T031930 [CBIT]:Communications Fault in component: BPC1

20150521T031951 [BPC1]:Failed to receive battery data

20150521T031951 [BPC1]:Communications Fault

20150521T031952 [CBIT]:Communications Fault in component: BPC1

20150521T032005 [Rowe_600]:first preamble found after 6599 bytes, which is more than sizeof( deviceResponse_ ) 4116

20150521T032008 [Rowe_600]:Ensemble number mismatch: 854 in header, 870 in ensemble data matrix.

20150521T032020 [Rowe_600]:Ensemble number mismatch: 877 in header, 889 in ensemble data matrix.

20150521T032047 [BPC1]:Failed to receive battery data

20150521T032047 [BPC1]:Communications Fault

20150521T032047 [CBIT]:Communications Fault in component: BPC1

20150521T032138 [PNI_TCM]:CRC does not match. Expected:0x16536 got:0x6463

20150521T032138 [PNI_TCM]:CRC does not match. Expected:0x34611 got:0x6465

20150521T032138 [PNI_TCM]:CRC does not match. Expected:0x7409 got:0x6465

20150521T032148 [PNI_TCM]:Failed to acquire valid data within timeout.

20150521T032148 [CBIT]:Data Fault in component: PNI_TCM

20150521T032208 [Rowe_600]:Ensemble number mismatch: 1003 in header, 1012 in ensemble data matrix.

20150521T032355 [Rowe_600]:first preamble found after 4212 bytes, which is more than sizeof( deviceResponse_ ) 4116

20150521T032524 [Rowe_600]:Different number of beams (65540) than expected (4).

20150521T032529 [Rowe_600]:first preamble found after 6360 bytes, which is more than sizeof( deviceResponse_ ) 4116

20150521T032644 [Rowe_600]:Only MATLAB type 10 (float32) matrices are supported, got MATLAB type 47

20150521T032701 [NAL9602]:Failed to initiate SBD session. Error code: 2

20150521T032748 [CommandLine]:got command load ./Missions/Science/drift_at_isotherm.xml

20150521T032752 [CommandLine]:Loaded ./Missions/Science/drift_at_isotherm.xml

20150521T032759 [CommandLine]:got command set drift_at_isotherm.AcousticTimeout 4.000000 hour

20150521T032759 [CommandLine]:got command run

20150521T032759 [CommandLine]:Running

20150521T032759 [MissionManager]:Started mission drift_at_isotherm

20150521T032800 [CTD_NeilBrown]:Could not get real or simulated CTD data. startTime.elapsed() = 0.426966

20150521T032800 [CTD_NeilBrown]:Could not get real or simulated CTD data. startTime.elapsed() = 0.837402

20150521T032801 [CTD_NeilBrown]:Could not get real or simulated CTD data. startTime.elapsed() = 0.000200

20150521T032805 [drift_at_isotherm:TempHolding:A:G]:Go down from depth 0.248679 m , at temp 11.501245 degC

20150521T032825 [Aanderaa_O2]:No communication! Re-starting

20150521T032825 [Aanderaa_O2]:Communications Fault

20150521T032825 [CBIT]:Communications Fault in component: Aanderaa_O2

20150521T032826 [Rowe_600]:Only MATLAB type 10 (float32) matrices are supported, got MATLAB type 0

20150521T032831 [Rowe_600]:Different number of beams (1) than expected (4).

20150521T032831 [CTD_NeilBrown]:Salinity reading out of range: 53.019402 psu

20150521T032832 [CTD_NeilBrown]:Salinity reading out of range: 56.640701 psu

20150521T032840 [Aanderaa_O2]:No communication! Re-starting

20150521T032840 [Aanderaa_O2]:Communications Fault

20150521T032841 [CTD_NeilBrown]:Bad response: -0.73

20150521T032841 [CBIT]:Communications Fault in component: Aanderaa_O2

20150521T032856 [Aanderaa_O2]:No communication! Re-starting

20150521T032856 [Aanderaa_O2]:Communications Fault

20150521T032856 [CBIT]:Communications Fault in component: Aanderaa_O2

20150521T032901 [Rowe_600]:Different number of beams (1) than expected (4).

20150521T032929 [Rowe_600]:Only MATLAB type 10 (float32) matrices are supported, got MATLAB type 0

20150521T032931 [Rowe_600]:unknown matrix type0

20150521T033004 [Rowe_600]:unknown matrix type0

20150521T033034 [Rowe_600]:unknown matrix type0

20150521T033150 [CTD_NeilBrown]:Bad response: -0.71

20150521T033157 [CTD_NeilBrown]:Salinity reading out of range: 0.037800 psu

20150521T033158 [CTD_NeilBrown]:Pressure reading out of range: -17.559999 decibar

20150521T033203 [CTD_NeilBrown]:Bad response: *10#

20150521T033300 [PNI_TCM]:Failed to acquire valid data within timeout.

20150521T033300 [CBIT]:Data Fault in component: PNI_TCM

20150521T033306 [CTD_NeilBrown]:Pressure reading out of range: -18.699999 decibar

20150521T033341 [CTD_NeilBrown]:Bad response: *11#

20150521T033402 [CTD_NeilBrown]:Bad response: -0.63

20150521T033417 [CTD_NeilBrown]:Bad response: *16#

20150521T033427 [PNI_TCM]:Failed to acquire valid data within timeout.

20150521T033427 [CBIT]:Data Fault in component: PNI_TCM

20150521T033532 [CTD_NeilBrown]:Pressure reading out of range: -10.370000 decibar

20150521T033546 [CTD_NeilBrown]:Bad response: 4.55

20150521T033550 [drift_at_isotherm:TempHolding:E:F]:TempTarget= 11.000000 degC , TempLowNarrow= 10.950000 degC , TempHighNarrow= 11.050000 degC . Set target depth to 0.332597 m , at temp 10.604150 degC

20150521T033850 [CTD_NeilBrown]:Bad response: 5.38

20150521T034337 [CTD_NeilBrown]:Bad response: 0.59

20150521T034517 [BPC1]:Failed to parse bank A battery data

20150521T034517 [CBIT]:Data Fault in component: BPC1

20150521T034556 [drift_at_isotherm:TempHolding:A:G]:Go down from depth 0.222651 m , at temp 11.456262 degC

20150521T035613 [drift_at_isotherm:TempHolding:E:F]:TempTarget= 11.000000 degC , TempLowNarrow= 10.950000 degC , TempHighNarrow= 11.050000 degC . Set target depth to 0.354586 m , at temp 11.379144 degC

20150521T035621 [BPC1]:Failed to parse bank B battery data

20150521T035621 [CBIT]:Data Fault in component: BPC1

20150521T035720 [BPC1]:Failed to parse message.

20150521T035720 [BPC1]:Failed to parse bank A battery data

20150521T035720 [CBIT]:Data Fault in component: BPC1

20150521T040152 [Rowe_600]:Different number of bins (1) than expected (30).

20150521T040236 [BPC1]:Failed to parse bank A battery data

20150521T040619 [drift_at_isotherm:TempHolding:C:G]:Go up from depth 0.226241 m , at temp 11.492548 degC

20150521T040636 [drift_at_isotherm:TempHolding:E:F]:TempTarget= 11.000000 degC , TempLowNarrow= 10.950000 degC , TempHighNarrow= 11.050000 degC . Set target depth to 0.253166 m , at temp 11.394922 degC

20150521T040717 [Rowe_600]:Different number of bins (1) than expected (30).

20150521T040808 [PNI_TCM]:LCB fault: LCB Watchdog Reset. Invalid Command.

20150521T040808 [PNI_TCM]:Hardware Fault

20150521T040931 [CTD_NeilBrown]:Bad response: 486

20150521T041453 [CTD_NeilBrown]:Bad response: 4772

20150521T041641 [drift_at_isotherm:TempHolding:A:G]:Go down from depth 0.224895 m , at temp 11.437738 degC

20150521T041940 [Rowe_600]:Different number of bins (1) than expected (30).

20150521T042849 [drift_at_isotherm:TempHolding:C:G]:Go up from depth 0.215919 m , at temp 11.030786 degC

20150521T043743 [BPC1]:Failed to parse message.

20150521T043743 [BPC1]:Failed to parse bank B battery data

20150521T043756 [BPC1]:Failed to parse message.

20150521T043756 [BPC1]:Failed to parse bank B battery data

20150521T043856 [drift_at_isotherm:TempHolding:C:G]:Go up from depth 0.277400 m , at temp 10.728754 degC

20150521T044555 [CTD_NeilBrown]:Bad response: 35004

20150521T044950 [RudderServo]:getPosition uart error serial timeout

20150521T044950 [RudderServo]:Rudder uart error - getPosition..serial timeout

20150521T044950 [RudderServo]:Communications Fault

20150521T044950 [CBIT]:Communications Fault in component: RudderServo

20150521T045059 [RudderServo]:Invalid EZ Servo response:"#"

20150521T045059 [RudderServo]:Communications Fault

20150521T045059 [RudderServo]:Rudder reporting null position

20150521T045059 [CBIT]:Communications Fault in component: RudderServo

20150521T045358 [Rowe_600]:payload size is too large: 1049948825 -- attempting to continue using maximum payload size: 4080