makai Path

trajectory

20251013T042307 [CommandExec]:got command restart logs

20251013T042328 [NAL9602]:Failed to initiate SBD session. Error code: 2

20251013T042430 [NAL9602]:Failed to initiate SBD session. Error code: 2

20251013T042459 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20251013T042547 [NAL9602]:Failed to initiate SBD session. Error code: 2

20251013T042957 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20251013T043308 [CommandExec]:got command schedule asap "load Transport/transit.tl;set transit.MissionTimeout 45 min;set transit.NeedCommsTime 45 min;set transit.Latitude 36.797 degree;set transit.Longitude -121.847 degree;set transit.Depth 60 m;set transit.MaxDepth 80 m" 3tdym 1 2.000000

20251013T043308 [CommandExec]:Scheduling command #1 of 2 with id=3tdym

20251013T043308 [CommandExec]:Scheduled #63 (#1 of 2 with id='3tdym'): "load Transport/transit.tl;set transit.MissionTimeout 45 min;set transit.NeedCommsTime 45 min;set transit.Latitude 36.797 degree;set transit.Longitude -121.847 degree;set transit.Depth 60 m;set transit.MaxDepth 80 m", ASAP

20251013T043353 [CommandExec]:got command schedule asap "set transit:NeedComms.CommsTimeout 15 min;run" 3tdym 2 2.000000

20251013T043353 [CommandExec]:Scheduling command #2 of 2 with id=3tdym

20251013T043353 [CommandExec]:Scheduled #64 (#2 of 2 with id='3tdym'): "set transit:NeedComms.CommsTimeout 15 min;run", ASAP

20251013T043354 [CommandExec]:got command load ./Missions/Transport/transit.tl

20251013T043355 [CommandExec]:Loaded ./Missions/Transport/transit.tl id=transit

20251013T043416 [CommandExec]:got command set transit.MissionTimeout 45 minute

20251013T043416 [CommandExec]:got command set transit.NeedCommsTime 45 minute

20251013T043416 [CommandExec]:got command set transit.Latitude 36.797 degree

20251013T043416 [CommandExec]:got command set transit.Longitude -121.847 degree

20251013T043416 [CommandExec]:got command set transit.Depth 60 meter

20251013T043416 [CommandExec]:got command set transit.MaxDepth 80 meter

20251013T043422 [CommandExec]:got command set transit:NeedComms.CommsTimeout 15 minute

20251013T043422 [CommandExec]:got command run

20251013T043422 [CommandExec]:Running

20251013T043422 [MissionManager]:Started mission transit

20251013T043424 [transit:Transit:Wpt1.Waypoint]:Navigating to waypoint: 36.797001,-121.847000

20251013T043424 [transit:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20251013T043434 [NAL9602]:GPS failed to acquire within timeout.

20251013T043434 [CBIT]:Data Fault in component: NAL9602

20251013T043436 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20251013T043632 [CBIT]:Navigation error has exceeded threshold. navErrorCriticalReporting is enabled.

20251013T043633 [CommandExec]:Scheduling is paused

20251013T043634 [MissionManager]:Started mission Default

20251013T044139 [CommandExec]:got command configSet CBIT.runNavErrorCritical 0 bool persist

20251013T044326 [CommandExec]:got command load ./Missions/Transport/transit.tl

20251013T044328 [CommandExec]:Loaded ./Missions/Transport/transit.tl id=transit

20251013T044344 [CommandExec]:got command set transit.NeedCommsTime 45 minute

20251013T044344 [CommandExec]:got command set transit.Latitude 36.797 degree

20251013T044344 [CommandExec]:got command set transit.Longitude -121.847 degree

20251013T044344 [CommandExec]:got command set transit.Depth 60 meter

20251013T044344 [CommandExec]:got command set transit.MaxDepth 80 meter

20251013T044344 [CommandExec]:got command run

20251013T044344 [CommandExec]:Running

20251013T044345 [MissionManager]:Started mission transit

20251013T044345 [BPC1]:Failed to receive data from 8 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 1, 2, 3, 4, 5, 6, 7, 8.

20251013T044346 [transit:Transit:Wpt1.Waypoint]:Navigating to waypoint: 36.797001,-121.847000

20251013T044346 [transit:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20251013T050812 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20251013T051538 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20251013T052447 [BPC1]:Failed to receive data from 8 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 1, 2, 3, 4, 5, 6, 7, 8.

20251013T053505 [NAL9602]:Inadequate Iridium signal strength reported: 0

20251013T053531 [NAL9602]:Inadequate Iridium signal strength reported: 0

20251013T053534 [NAL9602]:Inadequate Iridium signal strength reported: 0

20251013T053648 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20251013T054345 [MissionManager]:Started mission Default

20251013T055040 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20251013T060014 [CommandExec]:got command schedule asap "load Science/sci2_flat_and_level.tl;set sci2_flat_and_level.MissionTimeout 9.5 h;set sci2_flat_and_level.NeedCommsTime 90 min;set sci2_flat_and_level.Depth1 60 m;set sci2_flat_and_level.Lat1 36.797 degree" 3thc9 1 4.000000

20251013T060014 [CommandExec]:Scheduling command #1 of 4 with id=3thc9

20251013T060014 [CommandExec]:Scheduled #65 (#1 of 4 with id='3thc9'): "load Science/sci2_flat_and_level.tl;set sci2_flat_and_level.MissionTimeout 9.5 h;set sci2_flat_and_level.NeedCommsTime 90 min;set sci2_flat_and_level.Depth1 60 m;set sci2_flat_and_level.Lat1 36.797 degree", ASAP

20251013T060549 [BPC1]:Failed to receive data from 8 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 1, 2, 3, 4, 5, 6, 7, 8.

20251013T060648 [CommandExec]:got command schedule asap "set sci2_flat_and_level.Lon1 -121.847 degree;set sci2_flat_and_level.ApproachDepth 5 m;set sci2_flat_and_level.ApproachSpeed 1 m/s;set sci2_flat_and_level.ApproachDepthRate NaN m/s" 3thc9 2 4.000000

20251013T060648 [CommandExec]:Scheduling command #2 of 4 with id=3thc9

20251013T060648 [CommandExec]:Scheduled #66 (#2 of 4 with id='3thc9'): "set sci2_flat_and_level.Lon1 -121.847 degree;set sci2_flat_and_level.ApproachDepth 5 m;set sci2_flat_and_level.ApproachSpeed 1 m/s;set sci2_flat_and_level.ApproachDepthRate NaN m/s", ASAP

20251013T060703 [CommandExec]:got command schedule asap "set sci2_flat_and_level.ApproachPitchLimit 30 degree;set sci2_flat_and_level.ApproachSettleTimePreDive 0.2 min;set sci2_flat_and_level.ApproachSettleTimePostDive 0.01 min;set sci2_flat_and_level.MaxDepth 80 m" 3thc9 3 4.000000

20251013T060703 [CommandExec]:Scheduling command #3 of 4 with id=3thc9

20251013T060703 [CommandExec]:Scheduled #67 (#3 of 4 with id='3thc9'): "set sci2_flat_and_level.ApproachPitchLimit 30 degree;set sci2_flat_and_level.ApproachSettleTimePreDive 0.2 min;set sci2_flat_and_level.ApproachSettleTimePostDive 0.01 min;set sci2_flat_and_level.MaxDepth 80 m", ASAP

20251013T060721 [CommandExec]:got command schedule asap "set sci2_flat_and_level:NeedComms.CommsTimeout 20 min;run" 3thc9 4 4.000000

20251013T060721 [CommandExec]:Scheduled #68 (#4 of 4 with id='3thc9'): "set sci2_flat_and_level:NeedComms.CommsTimeout 20 min;run", ASAP

20251013T060721 [CommandExec]:got command load ./Missions/Science/sci2_flat_and_level.tl

20251013T060738 [CommandExec]:Loaded ./Missions/Science/sci2_flat_and_level.tl id=sci2_flat_and_level

20251013T060807 [CommandExec]:got command set sci2_flat_and_level.MissionTimeout 9.5 hour

20251013T060807 [CommandExec]:got command set sci2_flat_and_level.NeedCommsTime 90 minute

20251013T060807 [CommandExec]:got command set sci2_flat_and_level.Depth1 60 meter

20251013T060807 [CommandExec]:got command set sci2_flat_and_level.Lat1 36.797 degree

20251013T060837 [CommandExec]:got command set sci2_flat_and_level.Lon1 -121.847 degree

20251013T060837 [CommandExec]:got command set sci2_flat_and_level.ApproachDepth 5 meter

20251013T060837 [CommandExec]:got command set sci2_flat_and_level.ApproachSpeed 1 meter_per_second

20251013T060837 [CommandExec]:got command set sci2_flat_and_level.ApproachDepthRate NaN meter_per_second

20251013T060914 [CommandExec]:got command set sci2_flat_and_level.ApproachPitchLimit 30 degree

20251013T060914 [CommandExec]:got command set sci2_flat_and_level.ApproachSettleTimePreDive 0.2 minute

20251013T060914 [CommandExec]:got command set sci2_flat_and_level.ApproachSettleTimePostDive 0.01 minute

20251013T060914 [CommandExec]:got command set sci2_flat_and_level.MaxDepth 80 meter

20251013T060925 [CommandExec]:got command set sci2_flat_and_level:NeedComms.CommsTimeout 20 minute

20251013T060925 [CommandExec]:got command run

20251013T060925 [CommandExec]:Running

20251013T060925 [MissionManager]:Started mission sci2_flat_and_level

20251013T060929 [CTD_Seabird]:Failed to parse device response: #

20251013T060951 [NAL9602]:GPS failed to acquire within timeout.

20251013T060951 [CBIT]:Data Fault in component: NAL9602

20251013T060957 [CTD_Seabird]:Failed to parse device response: 0501.44#

20251013T061127 [CBIT]:Navigation error has exceeded threshold.

20251013T064205 [CTD_Seabird]:Failed to parse device response: .55#

20251013T064749 [CTD_Seabird]:Failed to parse device response: .67#

20251013T070704 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20251013T075238 [CTD_Seabird]:Salinity reading out of range: 18.320494 psu

20251013T075239 [CTD_Seabird]:Salinity reading out of range: 20.294485 psu

20251013T075351 [CTD_Seabird]:Salinity reading out of range: 20.756863 psu

20251013T075740 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20251013T075812 [NAL9602]:Queried for signal strength and failed to receive proper response.

20251013T081019 [CTD_Seabird]:Failed to parse device response: -4339.73#

20251013T081741 [sci2_flat_and_level:NeedComms:D:A_Timeout:A]:Comms timed out after 20.000000 min minutes

20251013T084605 [ThrusterHE]:getSpeed error serial timeout

20251013T084605 [ThrusterHE]:Thruster uart error: serial timeout

20251013T084605 [ThrusterHE]:Communications Fault

20251013T084605 [CBIT]:Communications Fault in component: ThrusterHE

20251013T085653 [GFScanner]:Beginning ground fault scan

20251013T095554 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20251013T095630 [NAL9602]:Queried for signal strength and failed to receive proper response.

20251013T101600 [sci2_flat_and_level:NeedComms:D:A_Timeout:A]:Comms timed out after 20.000000 min minutes

20251013T110747 [CTD_Seabird]:Failed to parse device response: .49#

20251013T111104 [BPC1]:BPC1A: No match for serial number FFFF in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20251013T112932 [CTD_Seabird]:Failed to parse device response: 60.52,10.992.19#

20251013T113514 [CTD_Seabird]:Failed to parse device response: 7,3.76193,2682.76#

20251013T115457 [NAL9602]:Queried for signal strength and failed to receive proper response.

20251013T121426 [sci2_flat_and_level:NeedComms:D:A_Timeout:A]:Comms timed out after 20.000000 min minutes

20251013T130017 [CTD_Seabird]:Failed to parse device response: 9,3.75736,2480.66#

20251013T132903 [BPC1]:BPC1A: No match for serial number FFFF in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20251013T144046 [RudderServo]:getPosition uart error serial timeout

20251013T144046 [RudderServo]:Rudder uart error - getPosition..serial timeout

20251013T144046 [RudderServo]:Communications Fault

20251013T144046 [CBIT]:Communications Fault in component: RudderServo

20251013T145653 [GFScanner]:Beginning ground fault scan

20251013T145857 [CTD_Seabird]:Failed to parse device response: 84,2144.98#

20251013T150022 [CTD_Seabird]:Failed to parse device response: 83,2149.35#

20251013T152334 [CommandExec]:got command schedule asap "load Science/sci2.tl;set sci2.MissionTimeout 9 h;set sci2.NeedCommsTime 90 min;set sci2.Lat1 36.797 degree;set sci2.Lon1 -121.847 degree;set sci2.YoYoMinDepth 5 m;set sci2.YoYoMaxDepth 50 m;set sci2.MaxDepth 70 m" 3u7h6 1 2.000000

20251013T152334 [CommandExec]:Scheduling command #1 of 2 with id=3u7h6

20251013T152334 [CommandExec]:Scheduled #69 (#1 of 2 with id='3u7h6'): "load Science/sci2.tl;set sci2.MissionTimeout 9 h;set sci2.NeedCommsTime 90 min;set sci2.Lat1 36.797 degree;set sci2.Lon1 -121.847 degree;set sci2.YoYoMinDepth 5 m;set sci2.YoYoMaxDepth 50 m;set sci2.MaxDepth 70 m", ASAP

20251013T152348 [CommandExec]:got command schedule asap "set sci2:NeedComms.CommsTimeout 20 min;run" 3u7h6 2 2.000000

20251013T152348 [CommandExec]:Scheduling command #2 of 2 with id=3u7h6

20251013T152348 [CommandExec]:Scheduled #70 (#2 of 2 with id='3u7h6'): "set sci2:NeedComms.CommsTimeout 20 min;run", ASAP

20251013T152348 [CommandExec]:got command load ./Missions/Science/sci2.tl

20251013T152403 [CommandExec]:Loaded ./Missions/Science/sci2.tl id=sci2

20251013T152403 [MissionManager]:Started mission Default

20251013T152432 [CommandExec]:got command set sci2.MissionTimeout 9 hour

20251013T152432 [CommandExec]:got command set sci2.NeedCommsTime 90 minute

20251013T152432 [CommandExec]:got command set sci2.Lat1 36.797 degree

20251013T152432 [CommandExec]:got command set sci2.Lon1 -121.847 degree

20251013T152432 [CommandExec]:got command set sci2.YoYoMinDepth 5 meter

20251013T152432 [CommandExec]:got command set sci2.YoYoMaxDepth 50 meter

20251013T152432 [CommandExec]:got command set sci2.MaxDepth 70 meter

20251013T152439 [CommandExec]:got command set sci2:NeedComms.CommsTimeout 20 minute

20251013T152440 [MissionManager]:Started mission sci2

20251013T152441 [sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20251013T152443 [CTD_Seabird]:Failed to parse device response: #

20251013T152657 [sci2:DiveCmd:YoYoDive:dive:E.AltitudeEnvelope]:Altitude Measurement is not Active.

20251013T152816 [ThrusterHE]:Zero Speed Commanded.

20251013T165925 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20251013T165927 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20251013T170004 [CTD_Seabird]:Failed to parse device response: -0.03,15.968.00#

20251013T172725 [CTD_Seabird]:Failed to parse device response: 46.37.81#

20251013T173849 [CTD_Seabird]:Failed to parse device response: 80#

20251013T173914 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20251013T174220 [CTD_Seabird]:Failed to parse device response: 49.98.66#

20251013T185215 [CTD_Seabird]:Failed to parse device response: 4,3.85555,3142.07#

20251013T190123 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20251013T201916 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20251013T205653 [GFScanner]:Beginning ground fault scan

20251013T213205 [RudderServo]:Overload Error

20251013T213205 [RudderServo]:Hardware Fault

20251013T213205 [CBIT]:Hardware Fault in component: RudderServo

20251013T215112 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20251013T215306 [CommandExec]:got command schedule asap "load Science/sci2.tl;set sci2.MissionTimeout 9 h;set sci2.NeedCommsTime 90 min;set sci2.Lat1 36.797 degree;set sci2.Lon1 -121.847 degree;set sci2.YoYoMinDepth 5 m;set sci2.YoYoMaxDepth 50 m;set sci2.MaxDepth 70 m" 3umdc 1 2.000000

20251013T215306 [CommandExec]:Scheduling command #1 of 2 with id=3umdc

20251013T215306 [CommandExec]:Scheduled #71 (#1 of 2 with id='3umdc'): "load Science/sci2.tl;set sci2.MissionTimeout 9 h;set sci2.NeedCommsTime 90 min;set sci2.Lat1 36.797 degree;set sci2.Lon1 -121.847 degree;set sci2.YoYoMinDepth 5 m;set sci2.YoYoMaxDepth 50 m;set sci2.MaxDepth 70 m", ASAP

20251013T215315 [CommandExec]:got command schedule asap "set sci2:NeedComms.CommsTimeout 20 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run" 3umdc 2 2.000000

20251013T215315 [CommandExec]:Scheduling command #2 of 2 with id=3umdc

20251013T215315 [CommandExec]:Scheduled #72 (#2 of 2 with id='3umdc'): "set sci2:NeedComms.CommsTimeout 20 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run", ASAP

20251013T215315 [CommandExec]:got command load ./Missions/Science/sci2.tl

20251013T215328 [CommandExec]:Loaded ./Missions/Science/sci2.tl id=sci2

20251013T215359 [CommandExec]:got command set sci2.MissionTimeout 9 hour

20251013T215359 [CommandExec]:got command set sci2.NeedCommsTime 90 minute

20251013T215359 [CommandExec]:got command set sci2.Lat1 36.797 degree

20251013T215359 [CommandExec]:got command set sci2.Lon1 -121.847 degree

20251013T215359 [CommandExec]:got command set sci2.YoYoMinDepth 5 meter

20251013T215359 [CommandExec]:got command set sci2.YoYoMaxDepth 50 meter

20251013T215359 [CommandExec]:got command set sci2.MaxDepth 70 meter

20251013T215420 [CommandExec]:got command set sci2:NeedComms.CommsTimeout 20 minute

20251013T215420 [CommandExec]:got command set sci2:BackseatDriver.EnableBackseat 1 bool

20251013T215421 [MissionManager]:Started mission sci2

20251013T215422 [sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20251013T215424 [CTD_Seabird]:Failed to parse device response: #

20251013T215500 [BackseatComponent]:piscivore: running backseat_app backseat application.

20251013T215654 [sci2:DiveCmd:YoYoDive:dive:E.AltitudeEnvelope]:Altitude Measurement is not Active.

20251013T215722 [CommandExec]:got command schedule asap "load Science/sci2.tl;set sci2.MissionTimeout 9 h;set sci2.NeedCommsTime 90 min;set sci2.Lat1 36.797 degree;set sci2.Lon1 -121.847 degree;set sci2.YoYoMinDepth 5 m;set sci2.YoYoMaxDepth 50 m;set sci2.MaxDepth 70 m" 3udbq 1 2.000000

20251013T215722 [CommandExec]:Scheduling command #1 of 2 with id=3udbq

20251013T215722 [CommandExec]:Scheduled #73 (#1 of 2 with id='3udbq'): "load Science/sci2.tl;set sci2.MissionTimeout 9 h;set sci2.NeedCommsTime 90 min;set sci2.Lat1 36.797 degree;set sci2.Lon1 -121.847 degree;set sci2.YoYoMinDepth 5 m;set sci2.YoYoMaxDepth 50 m;set sci2.MaxDepth 70 m", ASAP

20251013T221304 [RudderServo]:getPosition uart error serial timeout

20251013T221304 [RudderServo]:Rudder uart error - getPosition..serial timeout

20251013T221304 [RudderServo]:Communications Fault

20251013T221304 [CBIT]:Communications Fault in component: RudderServo

20251013T233808 [RudderServo]:Overload Error

20251013T233808 [RudderServo]:Hardware Fault

20251013T233808 [CBIT]:Hardware Fault in component: RudderServo

20251014T010429 [CTD_Seabird]:Failed to parse device response: 24.04,6#

20251014T010625 [CommandExec]:got command schedule asap "set sci2:NeedComms.CommsTimeout 20 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run" 3udbq 2 2.000000

20251014T010625 [CommandExec]:Scheduling command #2 of 2 with id=3udbq

20251014T010625 [CommandExec]:Scheduled #74 (#2 of 2 with id='3udbq'): "set sci2:NeedComms.CommsTimeout 20 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run", ASAP

20251014T010626 [CommandExec]:got command load ./Missions/Science/sci2.tl

20251014T010639 [CommandExec]:Loaded ./Missions/Science/sci2.tl id=sci2

20251014T010708 [CommandExec]:got command set sci2.MissionTimeout 9 hour

20251014T010708 [CommandExec]:got command set sci2.NeedCommsTime 90 minute

20251014T010708 [CommandExec]:got command set sci2.Lat1 36.797 degree

20251014T010708 [CommandExec]:got command set sci2.Lon1 -121.847 degree

20251014T010708 [CommandExec]:got command set sci2.YoYoMinDepth 5 meter

20251014T010708 [CommandExec]:got command set sci2.YoYoMaxDepth 50 meter

20251014T010708 [CommandExec]:got command set sci2.MaxDepth 70 meter

20251014T010726 [CommandExec]:got command set sci2:NeedComms.CommsTimeout 20 minute

20251014T010726 [CommandExec]:got command set sci2:BackseatDriver.EnableBackseat 1 bool

20251014T010726 [MissionManager]:Started mission sci2

20251014T010730 [sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20251014T010748 [CommandExec]:got command schedule 20251014T133000 "configSet CBIT.runNavErrorCritical 1 bool persist;restart logs"

20251014T010748 [CommandExec]:Scheduled #75: "configSet CBIT.runNavErrorCritical 1 bool persist;restart logs", AT TIME: 2025-10-14T13:30:00Z

20251014T010748 [CommandExec]:Scheduling was paused by an error at 2025-10-13T04:36:32Z

20251014T010758 [CommandExec]:got command schedule clear

20251014T010758 [CommandExec]:Cleared 1 scheduled commands.

20251014T010758 [CommandExec]:got command schedule resume

20251014T010758 [CommandExec]:Scheduling is resumed

20251014T010805 [BackseatComponent]:piscivore: running backseat_app backseat application.

20251014T010810 [CommandExec]:got command schedule 20251014T133000 "configSet CBIT.runNavErrorCritical 1 bool persist;restart logs"

20251014T010810 [CommandExec]:Scheduled #76: "configSet CBIT.runNavErrorCritical 1 bool persist;restart logs", AT TIME: 2025-10-14T13:30:00Z

20251014T010820 [CommandExec]:got command schedule 20251014T021500 "configSet CBIT.runNavErrorCritical 0 bool persist;restart logs"

20251014T010820 [CommandExec]:Scheduled #77: "configSet CBIT.runNavErrorCritical 0 bool persist;restart logs", AT TIME: 2025-10-14T02:15:00Z

20251014T010837 [CommandExec]:got command schedule 20251014T021500 "load Transport/keepstation.tl;set keepstation.MissionTimeout 14 h;set keepstation.NeedCommsTime 60 min;set keepstation.Latitude 36.797 degree;set keepstation.Longitude -121.847 degree;set keepstation.Radius 300 m" 3uwxq 1 2.000000

20251014T010837 [CommandExec]:Scheduling command #1 of 2 with id=3uwxq

20251014T010837 [CommandExec]:Scheduled #78 (#1 of 2 with id='3uwxq'): "load Transport/keepstation.tl;set keepstation.MissionTimeout 14 h;set keepstation.NeedCommsTime 60 min;set keepstation.Latitude 36.797 degree;set keepstation.Longitude -121.847 degree;set keepstation.Radius 300 m", AT TIME: 2025-10-14T02:15:00Z

20251014T010855 [CommandExec]:got command schedule 20251014T021500 "set keepstation.MaxDepth 50 m;run" 3uwxq 2 2.000000

20251014T010855 [CommandExec]:Scheduling command #2 of 2 with id=3uwxq

20251014T010855 [CommandExec]:Scheduled #79 (#2 of 2 with id='3uwxq'): "set keepstation.MaxDepth 50 m;run", AT TIME: 2025-10-14T02:15:00Z

20251014T010906 [CommandExec]:got command schedule 20251014T133000 "load Science/profile_station.tl;set profile_station.MissionTimeout 16 h;set profile_station.NeedCommsTime 45 min;set profile_station.Lat 36.7948 degree;set profile_station.Lon -121.8726 degree" 3ux2s 1 3.000000

20251014T010906 [CommandExec]:Scheduling command #1 of 3 with id=3ux2s

20251014T010906 [CommandExec]:Scheduled #80 (#1 of 3 with id='3ux2s'): "load Science/profile_station.tl;set profile_station.MissionTimeout 16 h;set profile_station.NeedCommsTime 45 min;set profile_station.Lat 36.7948 degree;set profile_station.Lon -121.8726 degree", AT TIME: 2025-10-14T13:30:00Z

20251014T010914 [CommandExec]:got command schedule 20251014T133000 "set profile_station.Radius 3000 m;set profile_station.YoYoMinDepth 4 m;set profile_station.YoYoMaxDepth 40 m;set profile_station.Speed 1 m/s;set profile_station.SinkDepth 10 m;set profile_station.SinkDepthTimeout 10 min" 3ux2s 2 3.000000

20251014T010914 [CommandExec]:Scheduling command #2 of 3 with id=3ux2s

20251014T010914 [CommandExec]:Scheduled #81 (#2 of 3 with id='3ux2s'): "set profile_station.Radius 3000 m;set profile_station.YoYoMinDepth 4 m;set profile_station.YoYoMaxDepth 40 m;set profile_station.Speed 1 m/s;set profile_station.SinkDepth 10 m;set profile_station.SinkDepthTimeout 10 min", AT TIME: 2025-10-14T13:30:00Z

20251014T011046 [CommandExec]:got command schedule 20251014T133000 "set profile_station.MaxDepth 55 m;set profile_station:NeedComms.CommsTimeout 20 min;set profile_station:BackseatDriver.EnableBackseat 1 bool;run" 3ux2s 3 3.000000

20251014T011046 [CommandExec]:Scheduling command #3 of 3 with id=3ux2s

20251014T011046 [CommandExec]:Scheduled #82 (#3 of 3 with id='3ux2s'): "set profile_station.MaxDepth 55 m;set profile_station:NeedComms.CommsTimeout 20 min;set profile_station:BackseatDriver.EnableBackseat 1 bool;run", AT TIME: 2025-10-14T13:30:00Z

20251014T011726 [CommandExec]:got command schedule 20251014T133000 "set profile_station.MaxDepth 55 m;set profile_station:NeedComms.CommsTimeout 20 min;set profile_station:BackseatDriver.EnableBackseat 1 bool;run" 3ux2s 3 3.000000

20251014T011726 [CommandExec]:Failed to schedule command with id=3ux2s. Duplicate idIndex.

20251014T012331 [sci2:DiveCmd:YoYoDive:dive:E.AltitudeEnvelope]:Altitude Measurement is not Active.