makai Path

trajectory

20250907T130146 [CommandExec]:got command restart logs

20250907T130150 [CTD_Seabird]:Failed to parse device response: #

20250907T130157 [CommandExec]:got command configSet CBIT.runNavErrorCritical 1 bool persist

20250907T130218 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250907T130225 [BackseatComponent]:piscivore: running backseat_app backseat application.

20250907T130718 [CTD_Seabird]:Failed to parse device response: 9#

20250907T130800 out while trying to reach target sink depth at current depth of 8.708343 m

20250907T131000 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250907T132924 [DVL_micro]:only read 0 of 4 data items for bottom velocity. Device response is::BI,+#

20250907T132924 [DVL_micro]:Failed to parse:#:BI,+#

20250907T132941 [CTD_Seabird]:Failed to parse device response: 99,2975.60#

20250907T134548 [DVL_micro]:only read 2 of 4 data items for beam range. Device response is::RD,+0000.30,+9999.99,+#

20250907T135118 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20250907T135225 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250907T135301 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250907T135717 out while trying to reach target sink depth at current depth of 8.057652 m

20250907T140652 [CTD_Seabird]:Failed to parse device response: 33.57,11.987.34#

20250907T140708 [BPC1]:Battery stick #2 (s/n: 0124) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250907T140708 [BPC1]:Battery stick #3 (s/n: 0162) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250907T140708 [BPC1]:Battery stick #4 (s/n: 017A) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.

20250907T140749 [DVL_micro]:DVL uart error: serial timeout

20250907T140749 [DVL_micro]:Communications Fault

20250907T140749 [DVL_micro]:Failed to parse:

20250907T140749 [CBIT]:Communications Fault in component: DVL_micro

20250907T141717 [DVL_micro]:DVL BIT error. See manual. Result code: 2336#Device respsone

20250907T144407 [CTD_Seabird]:Failed to parse device response: .38#

20250907T144552 [CTD_Seabird]:Failed to parse device response: #

20250907T144811 out while trying to reach target sink depth at current depth of 7.612041 m

20250907T150808 [DVL_micro]:only read 3 of 4 data items for beam range. Device response is::RD,+9999.99,+9999.99,+0109.70,+#

20250907T151321 [CTD_Seabird]:Failed to parse device response: 8,3.88200,3102.63#

20250907T151446 [BPC1]:Battery stick #2 (s/n: 0124) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250907T151446 [BPC1]:Battery stick #4 (s/n: 017A) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.

20250907T151710 [DVL_micro]:only read 2 of 4 data items for beam range. Device response is::RD,+9999.99,+9999.99,+#

20250907T151922 [CTD_Seabird]:Failed to parse device response: 21.59,12.260562#

20250907T153548 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250907T153723 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20250907T154155 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250907T154435 [DVL_micro]:DVL BIT error. See manual. Result code: 2370#Device respsone

20250907T155108 [DVL_micro]:only read 0 of 4 data items for beam range. Device response is::RD,,+9999.99,+0137.87,+9999.99#

20250907T160500 [CTD_Seabird]:Failed to parse device response: 14.09,3#

20250907T162224 [BPC1]:Battery stick #4 (s/n: 017A) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.

20250907T162245 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20250907T163426 [DVL_micro]:only read 2 of 4 data items for bottom velocity. Device response is::BI,-001,+00000,I#

20250907T165631 [CTD_Seabird]:Failed to parse device response: 31.04.00#

20250907T165957 [GFScanner]:Beginning ground fault scan

20250907T170459 [DVL_micro]:only read 3 of 4 data items for beam range. Device response is::RD,+9999.99,+9999.99,+0166.149#

20250907T171845 [CTD_Seabird]:Failed to parse device response: #

20250907T172154 [Radio_Surface]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown.

20250907T172154 [Radio_Surface]:Hardware Fault

20250907T172154 [CBIT]:Hardware Fault in component: Radio_Surface

20250907T172431 [DVL_micro]:only read 1 of 4 data items for beam range. Device response is::RD,+99#

20250907T172738 [CTD_Seabird]:Failed to parse device response: 80#

20250907T173117 [DVL_micro]:only read 2 of 4 data items for beam range. Device response is::RD,+9999.99,+999999.99#

20250907T174008 [CTD_Seabird]:Failed to parse device response: 5,4.18123,4633.54#

20250907T174650 [DVL_micro]:only read 0 of 1 data item for BIT error. Device response is::TS,0000000000+00159,+00000,I#

20250907T175213 [DVL_micro]:DVL BIT error. See manual. Result code: 1071#Device respsone

20250907T175453 [DVL_micro]:only read 3 of 4 data items for bottom velocity. Device response is::BI,-00004,+01182,+00089,+0000000.00#

20250907T183610 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250907T193005 [CTD_Seabird]:Failed to parse device response: 8,3.84870,2877.78#

20250907T194815 [DVL_micro]:only read 1 of 4 data items for beam range. Device response is::RD,+0080.47.83#

20250907T195145 [CTD_Seabird]:Failed to parse device response: 0.09,16.602.75#

20250907T203854 [DVL_micro]:DVL uart error: serial timeout

20250907T203854 [DVL_micro]:Communications Fault

20250907T203854 [DVL_micro]:Failed to parse:

20250907T203854 [CBIT]:Communications Fault in component: DVL_micro

20250907T204017 [DVL_micro]:No DVL communication! Re-initializing

20250907T204017 [DVL_micro]:Communications Fault

20250907T204017 [CBIT]:Communications Fault in component: DVL_micro

20250907T204142 [DataOverHttps]:Server acknowledged file Logs/20250907T130146/Express0028.lzma, not

20250907T204656 [CTD_Seabird]:Failed to parse device response: 14.57,3#

20250907T205625 [CTD_Seabird]:Failed to parse device response: 24.86,12.0287,#

20250907T210459 [DVL_micro]:DVL uart error: serial timeout

20250907T210459 [DVL_micro]:Failed to parse:

20250907T211205 [CTD_Seabird]:Failed to parse device response: 27.09.61#

20250907T214141 [RudderServo]:Overload Error

20250907T214141 [RudderServo]:Hardware Fault

20250907T214141 [CBIT]:Hardware Fault in component: RudderServo

20250907T214357 [DVL_micro]:only read 2 of 4 data items for bottom velocity. Device response is::BI,-00015,+000,A#

20250907T214651 [DVL_micro]:only read 2 of 4 data items for beam range. Device response is::RD,+9999.99,+9999.99,+#

20250907T214940 [DVL_micro]:only read 3 of 4 data items for beam range. Device response is::RD,+9999.99,+99999.99,+9999.99#

20250907T221951 [CTD_Seabird]:Salinity reading out of range: 26.741014 psu

20250907T225957 [GFScanner]:Beginning ground fault scan

20250907T231258 [CommandExec]:got command schedule 20250908T033000 "restart logs;configSet CBIT.runNavErrorCritical 0 bool persist"

20250907T231258 [CommandExec]:Scheduled #28: "restart logs;configSet CBIT.runNavErrorCritical 0 bool persist", AT TIME: 2025-09-08T03:30:00Z

20250907T231318 [CommandExec]:got command schedule 20250908T033000 "load Transport/keepstation.tl;set keepstation.MissionTimeout 11 h;set keepstation.NeedCommsTime 60 min;set keepstation.Depth 20 m;set keepstation.Speed 1 m/s;set keepstation.SinkOffSurface 1 bool" 204wi 1 2.000000

20250907T231318 [CommandExec]:Scheduling command #1 of 2 with id=204wi

20250907T231318 [CommandExec]:Scheduled #29 (#1 of 2 with id='204wi'): "load Transport/keepstation.tl;set keepstation.MissionTimeout 11 h;set keepstation.NeedCommsTime 60 min;set keepstation.Depth 20 m;set keepstation.Speed 1 m/s;set keepstation.SinkOffSurface 1 bool", AT TIME: 2025-09-08T03:30:00Z

20250907T231337 [CommandExec]:got command schedule 20250908T033000 "set keepstation.MaxDepth 45 m;set keepstation:NeedComms.SurfaceSpeed 1 m/s;set keepstation:NeedComms.CommsTimeout 10 min;run" 204wi 2 2.000000

20250907T231337 [CommandExec]:Scheduling command #2 of 2 with id=204wi

20250907T231337 [CommandExec]:Scheduled #30 (#2 of 2 with id='204wi'): "set keepstation.MaxDepth 45 m;set keepstation:NeedComms.SurfaceSpeed 1 m/s;set keepstation:NeedComms.CommsTimeout 10 min;run", AT TIME: 2025-09-08T03:30:00Z

20250907T231356 [CommandExec]:got command schedule 20250908T130000 "restart logs;configSet CBIT.runNavErrorCritical 1 bool persist"

20250907T231356 [CommandExec]:Scheduled #31: "restart logs;configSet CBIT.runNavErrorCritical 1 bool persist", AT TIME: 2025-09-08T13:00:00Z

20250907T231416 [CommandExec]:got command schedule 20250908T130000 "load Science/profile_station.tl;set profile_station.MissionTimeout 16 h;set profile_station.NeedCommsTime 45 min;set profile_station.Lat 36.7948 degree;set profile_station.Lon -121.8726 degree" 205jl 1 3.000000

20250907T231416 [CommandExec]:Scheduling command #1 of 3 with id=205jl

20250907T231416 [CommandExec]:Scheduled #32 (#1 of 3 with id='205jl'): "load Science/profile_station.tl;set profile_station.MissionTimeout 16 h;set profile_station.NeedCommsTime 45 min;set profile_station.Lat 36.7948 degree;set profile_station.Lon -121.8726 degree", AT TIME: 2025-09-08T13:00:00Z

20250907T231448 [CommandExec]:got command schedule 20250908T130000 "set profile_station.Radius 3000 m;set profile_station.YoYoMinDepth 4 m;set profile_station.YoYoMaxDepth 40 m;set profile_station.Speed 1 m/s;set profile_station.SinkOffSurface 1 bool;set profile_station.SinkDepth 10 m" 205jl 2 3.000000

20250907T231448 [CommandExec]:Scheduling command #2 of 3 with id=205jl

20250907T231448 [CommandExec]:Scheduled #33 (#2 of 3 with id='205jl'): "set profile_station.Radius 3000 m;set profile_station.YoYoMinDepth 4 m;set profile_station.YoYoMaxDepth 40 m;set profile_station.Speed 1 m/s;set profile_station.SinkOffSurface 1 bool;set profile_station.SinkDepth 10 m", AT TIME: 2025-09-08T13:00:00Z

20250907T231507 [CommandExec]:got command schedule 20250908T130000 "set profile_station.SinkDepthTimeout 3 min;set profile_station.MaxDepth 55 m;set profile_station:NeedComms.CommsTimeout 10 min;set profile_station:BackseatDriver.EnableBackseat 1 bool;run" 205jl 3 3.000000

20250907T231507 [CommandExec]:Scheduling command #3 of 3 with id=205jl

20250907T231507 [CommandExec]:Scheduled #34 (#3 of 3 with id='205jl'): "set profile_station.SinkDepthTimeout 3 min;set profile_station.MaxDepth 55 m;set profile_station:NeedComms.CommsTimeout 10 min;set profile_station:BackseatDriver.EnableBackseat 1 bool;run", AT TIME: 2025-09-08T13:00:00Z

20250907T232130 [profile_station:NeedComms:D:A_Timeout:A]:Comms timed out after 10.000000 min minutes

20250907T232215 [DVL_micro]:only read 1 of 4 data items for beam range. Device response is::RD,.99#

20250907T234912 [DVL_micro]:only read 0 of 1 data item for BIT error. Device response is::TS,0000000+00085,+00000,A#

20250908T001014 [DataOverHttps]:Server acknowledged file Logs/20250907T130146/Express0055.lzma, notLogs/20250907T130146/Express0058.lzma

20250908T001205 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250908T002055 [DVL_micro]:only read 3 of 4 data items for beam range. Device response is::RD,+0051.99,+0057.599,+0057.89#

20250908T003331 [DVL_micro]:only read 0 of 4 data items for bottom velocity. Device response is::BI,+,000.00#

20250908T005707 [CTD_Seabird]:Salinity reading out of range: 22.865875 psu

20250908T010208 [DVL_micro]:only read 3 of 4 data items for beam range. Device response is::RD,+0075.95,+0076.83,+9999.99,#

20250908T010819 [CTD_Seabird]:Failed to parse device response: 32.11,12.632.61#

20250908T012242 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250908T013822 [CTD_Seabird]:Failed to parse device response: 0#

20250908T014858 [CTD_Seabird]:Salinity reading out of range: 15.116830 psu

20250908T021747 [DVL_micro]:only read 3 of 4 data items for bottom velocity. Device response is::BI,+0015,-00055,+00000,A#

20250908T022550 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250908T022623 [CTD_Seabird]:Failed to parse device response: .86#

20250908T024005 [DVL_micro]:only read 0 of 1 data item for BIT error. Device response is::TS,000000000000000,I#