makai Path

trajectory

20190728T021824 [CommandLine]:got command restart logs

20190728T021827 [NAL9602]:parseGSV uart error: serial buffer full

20190728T022059 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190728T022140 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190728T022251 [NAL9602]:parseGSV uart error: serial buffer full

20190728T022330 [BPC1]:Battery stick #38 (s/n: 0139) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20190728T022330 [BPC1]:Battery stick #39 (s/n: 00F0) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20190728T025311 [NAL9602]:parseGSV uart error: serial buffer full

20190728T025335 [CommandLine]:got command schedule "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 12 hour;set esp_kiss.ESPCartridgeType_3 -9 count;set esp_kiss.ESPCartridgeType_4 -9 count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute" 9h43 1 2.000000

20190728T025335 [CommandLine]:Scheduling command #1 of 2 with id=9h43

20190728T025335 [CommandLine]:Scheduled #18 (#1 of 2 with id='9h43'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 12 hour;set esp_kiss.ESPCartridgeType_3 -9 count;set esp_kiss.ESPCartridgeType_4 -9 count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190728T025349 [CommandLine]:got command schedule "set esp_kiss.MaxDepth 15 meter;run " 9h43 2 2.000000

20190728T025349 [CommandLine]:Scheduling command #2 of 2 with id=9h43

20190728T025349 [CommandLine]:Scheduled #19 (#2 of 2 with id='9h43'): "set esp_kiss.MaxDepth 15 meter;run "

20190728T025415 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190728T032828 [CommandLine]:got command schedule "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.7833 degree;set sci2_flat_and_level.Lon1 -121.9 degree" 9hg7 1 2.000000

20190728T032828 [CommandLine]:Scheduling command #1 of 2 with id=9hg7

20190728T032828 [CommandLine]:Scheduled #20 (#1 of 2 with id='9hg7'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.7833 degree;set sci2_flat_and_level.Lon1 -121.9 degree"

20190728T032849 [CommandLine]:got command schedule "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run " 9hg7 2 2.000000

20190728T032849 [CommandLine]:Scheduling command #2 of 2 with id=9hg7

20190728T032849 [CommandLine]:Scheduled #21 (#2 of 2 with id='9hg7'): "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run "

20190728T033111 [BPC1]:Battery stick #38 (s/n: 0139) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20190728T033111 [BPC1]:Battery stick #39 (s/n: 00F0) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20190728T033300 [NAL9602]:Verify xmit timeout failure.

20190728T033300 [CBIT]:Data Fault in component: NAL9602

20190728T033915 [CTD_Seabird]:Failed to parse device response: .00#

20190728T035731 [CommandLine]:got command load ./Missions/Science/esp_kiss.xml

20190728T035732 [MissionManager]:Slate does not contain CTD_NeilBrown.bin_mean_sea_water_temperature

20190728T035732 [MissionManager]:Slate does not contain celsius

20190728T035733 [CommandLine]:Loaded ./Missions/Science/esp_kiss.xml

20190728T035733 [MissionManager]:Started mission Default

20190728T035753 [CommandLine]:got command set esp_kiss.MissionTimeout 12.000000 hour

20190728T035753 [CommandLine]:got command set esp_kiss.ESPCartridgeType_3 -9.000000 count

20190728T035753 [CommandLine]:got command set esp_kiss.ESPCartridgeType_4 -9.000000 count

20190728T035753 [CommandLine]:got command set esp_kiss.ApproachDepth 2.000000 meter

20190728T035753 [CommandLine]:got command set esp_kiss.ApproachSettleTimePreDive 3.000000 minute

20190728T035756 [CommandLine]:got command set esp_kiss.MaxDepth 15.000000 meter

20190728T035756 [CommandLine]:got command run

20190728T035756 [CommandLine]:Running

20190728T035756 [MissionManager]:Started mission esp_kiss

20190728T035757 [esp_kiss:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20190728T035759 [CTD_Seabird]:Failed to parse device response: #

20190728T040611 [esp_kiss:SampleESP:sample:A]:At 2.097222 m , settling for 3.000000 min

20190728T040912 [esp_kiss:SampleESP:sample:C]:Requesting ESP cartridge type: -4.000000 count

20190728T040914 [ESPComponent]:Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.5.2:10.89.5.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8

20190728T040914 [ESPComponent]:Waiting for ESP to connect (timeout=150.0000)

20190728T040950 [ESPComponent]:ESP has connected as client

20190728T040950 [ESPComponent]:[sample #6] Setting cartridge argument to -4

20190728T040950 [ESPComponent]:[sample #6] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT

20190728T040951 [esp_kiss:SampleESP:sample:F]:ESP sampling at 3.544023 m inwater with 2.683560 ug/l chlorophyll fluorescence.

20190728T040951 [ESPComponent]:[sample #6] ESP sampling state: S_PREPARING_SHOW_LOG

20190728T040952 [ESPComponent]:[sample #6] ESP sampling state: S_PREPARING_SHOW_STATUS

20190728T040954 [ESPComponent]:[sample #6] ESP sampling state: S_LOADING_CARTRIDGE

20190728T041032 [ESPComponent]:[sample #6] ESP sampling state: S_WAITING_FOR_PRIMING (@12,archiveHiBiomass_bac)

20190728T041034 [ESPComponent]:[sample #6] ESP sampling state: S_PRIMING (@100.0)

20190728T041034 [ESPComponent]:[sample #6] ESP sampling state: S_WAITING_FOR_FILTERING (@100.0)

20190728T041313 [ESPComponent]:[sample #6] ESP sampling state: S_FILTERING (@0.0)

20190728T041313 [ESPComponent]:[sample #6] ESP sampling state: S_WAITING_FOR_PAUSED (@0.0)

20190728T042733 [ESPComponent]:[sample #6] ESP sampling state: S_PAUSED (@242.682)

20190728T042733 [ESPComponent]:[sample #6] ESP sampling state: S_PROCESSING (@242.682)

20190728T042736 [ESPComponent]:[sample #6] ESP sampling state: S_WAITING_FOR_PROCESSED (@12,archiveHiBiomass_bac)

20190728T043851 [BPC1]:Battery stick #38 (s/n: 0139) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20190728T043851 [BPC1]:Battery stick #39 (s/n: 00F0) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20190728T044028 [ESPComponent]:[sample #6] ESP sampling state: S_STOPPING (@12,archiveHiBiomass_bac)

20190728T044055 [ESPComponent]:Syncing ESP logs with command: ! rsync -ruzq esp@esp:'/var/log/esp/real /var/log/esp/real.out /var/log/esp/real.slot /var/log/esp/*.spr' /LRAUV/ESPlogs/. &

20190728T044055 [CommandLine]:got command ! rsync -ruzq esp@esp:'/var/log/esp/real /var/log/esp/real.out /var/log/esp/real.slot /var/log/esp/*.spr' /LRAUV/ESPlogs/. &

20190728T044055 [ESPComponent]:[sample #6] ESP sampling state: S_STOPPED

20190728T044100 [CommandLine]:Command rsync -ruzq esp@esp:'/var/log/esp/real /var/log/esp/real.out /var/log/esp/real.slot /var/log/esp/*.spr' /LRAUV/ESPlogs/. & timed out

20190728T044555 [ESPComponent]:[sample #6] ESP sampling sequence completed normally.

20190728T044556 [ESPComponent]:[sample #6] ESP log summary report (D messages):#@21:10:04.38 Selecting Cartridge 12#@21:27:29.03 Cartridge::Sampler::Clogged in FILTERING -- Cartridge clogged#@21:27:29.23 Sampled 242.7ml#@21:27:51.06 Slide::Error in PROCESSING -- Archive Syringe (ArS) positionErr at 4ul (sensed 30ul)#@21:27:51.08 Retry #1 of 2#@21:27:51.95 Slide::Error in PROCESSING -- Archive Syringe (ArS) positionErr at 4ul (sensed 31ul)#@21:27:51.96 Retry #2 of 2#@21:27:52.82 Slide::Error in PROCESSING -- IGNORED Archive Syringe (ArS) positionErr at 3ul (sensed 31ul)#@21:39:29.79 Slide::Error in PROCESSING -- Archive Syringe (ArS) positionErr at 2ul (sensed 29ul)#@21:39:29.80 Retry #1 of 2#@21:39:30.64 Slide::Error in PROCESSING -- Archive Syringe (ArS) positionErr at 3ul (sensed 29ul)#@21:39:30.65 Retry #2 of 2#@21:39:31.52 Slide::Error in PROCESSING -- IGNORED Archive Syringe (ArS) positionErr at 3ul (sensed 29ul)#

20190728T044556 [esp_kiss:SampleESP:sample:A]:At 3.001474 m , settling for 3.000000 min

20190728T044857 [esp_kiss:SampleESP:sample:C]:Requesting ESP cartridge type: -9.000000 count

20190728T044859 [ESPComponent]:Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.5.2:10.89.5.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8

20190728T044900 [ESPComponent]:Waiting for ESP to connect (timeout=150.0000)

20190728T044932 [ESPComponent]:ESP has connected as client

20190728T044933 [ESPComponent]:[sample #7] Setting cartridge argument to -9

20190728T044933 [ESPComponent]:[sample #7] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT

20190728T044933 [esp_kiss:SampleESP:sample:F]:ESP sampling at 3.121293 m inwater with 2.154600 ug/l chlorophyll fluorescence.

20190728T044934 [ESPComponent]:[sample #7] ESP sampling state: S_PREPARING_SHOW_LOG

20190728T044934 [ESPComponent]:[sample #7] ESP sampling state: S_PREPARING_SHOW_STATUS

20190728T044936 [ESPComponent]:[sample #7] ESP sampling state: S_LOADING_CARTRIDGE

20190728T045015 [ESPComponent]:[sample #7] ESP sampling state: S_WAITING_FOR_PRIMING (@13,daSPR_phyto)

20190728T045016 [ESPComponent]:[sample #7] ESP sampling state: S_PRIMING (@100.0)

20190728T045017 [ESPComponent]:[sample #7] ESP sampling state: S_WAITING_FOR_FILTERING (@100.0)

20190728T045257 [ESPComponent]:[sample #7] ESP sampling state: S_FILTERING (@0.0)

20190728T045257 [ESPComponent]:[sample #7] ESP sampling state: S_WAITING_FOR_PAUSED (@0.0)

20190728T051313 [ESPComponent]:[sample #7] ESP sampling state: S_PAUSED (@352.823)

20190728T051313 [ESPComponent]:[sample #7] ESP sampling state: S_PROCESSING (@352.823)

20190728T051316 [ESPComponent]:[sample #7] ESP sampling state: S_WAITING_FOR_PROCESSED (@13,daSPR_phyto)

20190728T054121 [BuoyancyServo]:Reading outside of valid range:0.000000#

20190728T054121 [BuoyancyServo]:Buoyancy engine reporting null position

20190728T054121 [BuoyancyServo]:Hardware Fault

20190728T054121 [CBIT]:Hardware Fault in component: BuoyancyServo

20190728T054402 [BuoyancyServo]:Reading outside of valid range:0.000000#

20190728T054402 [BuoyancyServo]:Buoyancy engine reporting null position

20190728T054402 [BuoyancyServo]:Hardware Fault

20190728T054402 [CBIT]:Hardware Fault in component: BuoyancyServo

20190728T060906 [ESPComponent]:[sample #7] ESP sampling state: S_STOPPING (@13,daSPR_phyto)

20190728T060937 [ESPComponent]:Syncing ESP logs with command: ! rsync -ruzq esp@esp:'/var/log/esp/real /var/log/esp/real.out /var/log/esp/real.slot /var/log/esp/*.spr' /LRAUV/ESPlogs/. &

20190728T060937 [CommandLine]:got command ! rsync -ruzq esp@esp:'/var/log/esp/real /var/log/esp/real.out /var/log/esp/real.slot /var/log/esp/*.spr' /LRAUV/ESPlogs/. &

20190728T060938 [ESPComponent]:[sample #7] ESP sampling state: S_STOPPED

20190728T060942 [CommandLine]:Command rsync -ruzq esp@esp:'/var/log/esp/real /var/log/esp/real.out /var/log/esp/real.slot /var/log/esp/*.spr' /LRAUV/ESPlogs/. & timed out

20190728T061437 [ESPComponent]:[sample #7] ESP sampling sequence completed normally.

20190728T061438 [ESPComponent]:[sample #7] ESP log summary report (3 messages):#@21:49:46.52 Selecting Cartridge 13#@22:13:07.80 Cartridge::Sampler::Clogged in FILTERING -- Cartridge clogged#@22:13:08.38 Sampled 352.8ml#

20190728T061439 [esp_kiss:SampleESP:sample:A]:At 3.320990 m , settling for 3.000000 min

20190728T061608 [BuoyancyServo]:Reading outside of valid range:0.000000#

20190728T061608 [BuoyancyServo]:Buoyancy engine reporting null position

20190728T061608 [BuoyancyServo]:Hardware Fault

20190728T061608 [CBIT]:Hardware Fault in component: BuoyancyServo

20190728T061740 [esp_kiss:SampleESP:sample:C]:Requesting ESP cartridge type: -9.000000 count

20190728T061742 [ESPComponent]:Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.5.2:10.89.5.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8

20190728T061742 [ESPComponent]:Waiting for ESP to connect (timeout=150.0000)

20190728T061816 [ESPComponent]:ESP has connected as client

20190728T061817 [ESPComponent]:[sample #8] Setting cartridge argument to -9

20190728T061817 [ESPComponent]:[sample #8] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT

20190728T061817 [esp_kiss:SampleESP:sample:F]:ESP sampling at 2.804918 m inwater with 1.670100 ug/l chlorophyll fluorescence.

20190728T061818 [ESPComponent]:[sample #8] ESP sampling state: S_PREPARING_SHOW_LOG

20190728T061818 [ESPComponent]:[sample #8] ESP sampling state: S_PREPARING_SHOW_STATUS

20190728T061820 [ESPComponent]:[sample #8] ESP sampling state: S_LOADING_CARTRIDGE

20190728T061859 [ESPComponent]:[sample #8] ESP sampling state: S_WAITING_FOR_PRIMING (@11,daSPR_phyto)

20190728T061901 [ESPComponent]:[sample #8] ESP sampling state: S_PRIMING (@100.0)

20190728T061901 [ESPComponent]:[sample #8] ESP sampling state: S_WAITING_FOR_FILTERING (@100.0)

20190728T062142 [ESPComponent]:[sample #8] ESP sampling state: S_FILTERING (@0.0)

20190728T062143 [ESPComponent]:[sample #8] ESP sampling state: S_WAITING_FOR_PAUSED (@0.0)

20190728T062725 [CTD_Seabird]:Failed to parse device response: .00#

20190728T064802 [CBIT]:Beginning ground fault scan

20190728T065005 [ESPComponent]:[sample #8] ESP sampling state: S_PAUSED (@481.924)

20190728T065006 [ESPComponent]:[sample #8] ESP sampling state: S_PROCESSING (@481.924)

20190728T065008 [ESPComponent]:[sample #8] ESP sampling state: S_WAITING_FOR_PROCESSED (@11,daSPR_phyto)

20190728T065405 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20190728T065941 [CTD_Seabird]:Failed to parse device response: .2366,4.16432,0.00#

20190728T073458 [CTD_Seabird]:Failed to parse device response: 23047,4.16967,0.00#

20190728T074400 [ESPComponent]:[sample #8] ESP sampling state: S_STOPPING (@11,daSPR_phyto)

20190728T074431 [ESPComponent]:Syncing ESP logs with command: ! rsync -ruzq esp@esp:'/var/log/esp/real /var/log/esp/real.out /var/log/esp/real.slot /var/log/esp/*.spr' /LRAUV/ESPlogs/. &

20190728T074431 [CommandLine]:got command ! rsync -ruzq esp@esp:'/var/log/esp/real /var/log/esp/real.out /var/log/esp/real.slot /var/log/esp/*.spr' /LRAUV/ESPlogs/. &

20190728T074431 [ESPComponent]:[sample #8] ESP sampling state: S_STOPPED

20190728T074436 [CommandLine]:Command rsync -ruzq esp@esp:'/var/log/esp/real /var/log/esp/real.out /var/log/esp/real.slot /var/log/esp/*.spr' /LRAUV/ESPlogs/. & timed out

20190728T074634 [CTD_Seabird]:Failed to parse device response: .00#

20190728T074931 [ESPComponent]:[sample #8] ESP sampling sequence completed normally.

20190728T074931 [ESPComponent]:[sample #8] ESP log summary report (3 messages):#@23:18:30.91 Selecting Cartridge 11#@23:50:00.30 Cartridge::Sampler::Clogged in FILTERING -- Cartridge clogged#@23:50:00.50 Sampled 481.9ml#

20190728T075259 [CTD_Seabird]:Failed to parse device response: 9,4.16414,0.00#

20190728T075352 [ESPComponent]:[sample #9] ESP sampling state: S_WAITING_FOR_PRIMING (@10,daSPR_phyto)

20190728T082624 [ESPComponent]:[sample #9] ESP sampling state: S_WAITING_FOR_PROCESSED (@10,daSPR_phyto)

20190728T091907 [ESPComponent]:[sample #9] ESP sampling state: S_STOPPING (@10,daSPR_phyto)

20190728T092439 [ESPComponent]:[sample #9] ESP log summary report (3 messages):#@00:53:23.93 Selecting Cartridge 10#@01:26:16.08 Cartridge::Sampler::Clogged in FILTERING -- Cartridge clogged#@01:26:16.28 Sampled 519.3ml#

20190728T092439 [CommandLine]:got command load ./Missions/Science/sci2_flat_and_level.xml

20190728T092440 [Aanderaa_O2]:LCB fault: Software Overcurrent.

20190728T092440 [Aanderaa_O2]:Hardware Fault

20190728T092440 [CBIT]:Hardware Fault in component: Aanderaa_O2

20190728T092441 [CommandLine]:Loaded ./Missions/Science/sci2_flat_and_level.xml

20190728T092441 [MissionManager]:Started mission Default

20190728T092443 [ThrusterServo]:Thruster uart error: serial timeout

20190728T092443 [ThrusterServo]:Communications Fault

20190728T092443 [CBIT]:Communications Fault in component: ThrusterServo

20190728T092459 [CommandLine]:got command set sci2_flat_and_level.MissionTimeout 6.000000 hour

20190728T092459 [CommandLine]:got command set sci2_flat_and_level.NeedCommsTime 30.000000 minute

20190728T092459 [CommandLine]:got command set sci2_flat_and_level.Lat1 36.783298 degree

20190728T092459 [CommandLine]:got command set sci2_flat_and_level.Lon1 -121.900002 degree

20190728T092511 [CommandLine]:got command set sci2_flat_and_level.ApproachDepth 1.750000 meter

20190728T092511 [CommandLine]:got command set sci2_flat_and_level.ApproachSettleTimePreDive 3.000000 minute

20190728T092511 [CommandLine]:got command run

20190728T092511 [CommandLine]:Running

20190728T092511 [MissionManager]:Started mission sci2_flat_and_level

20190728T092514 [CTD_Seabird]:Failed to parse device response: #

20190728T092525 [CommandLine]:got command schedule "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute;set esp_kiss.MaxDepth 15 meter;run "

20190728T092525 [CommandLine]:Scheduled #22: "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute;set esp_kiss.MaxDepth 15 meter;run "

20190728T124813 [CBIT]:Beginning ground fault scan

20190728T125445 [CommandLine]:got command load ./Missions/Science/esp_kiss.xml

20190728T125446 [MissionManager]:Slate does not contain CTD_NeilBrown.bin_mean_sea_water_temperature

20190728T125446 [MissionManager]:Slate does not contain celsius

20190728T125447 [CommandLine]:Loaded ./Missions/Science/esp_kiss.xml

20190728T125447 [MissionManager]:Started mission Default

20190728T125506 [CommandLine]:got command set esp_kiss.MissionTimeout 6.000000 hour

20190728T125506 [CommandLine]:got command set esp_kiss.ESPCartridgeType_1 -9.000000 count

20190728T125506 [CommandLine]:got command set esp_kiss.ApproachDepth 2.000000 meter

20190728T125506 [CommandLine]:got command set esp_kiss.ApproachSettleTimePreDive 3.000000 minute

20190728T125506 [CommandLine]:got command set esp_kiss.MaxDepth 15.000000 meter

20190728T125506 [CommandLine]:got command run

20190728T125506 [CommandLine]:Running

20190728T125506 [MissionManager]:Started mission esp_kiss

20190728T125508 [esp_kiss:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20190728T125509 [CTD_Seabird]:Failed to parse device response: #

20190728T133023 [CTD_Seabird]:Failed to parse device response: 8,4.13732,0.00#

20190728T133234 [CTD_Seabird]:Failed to parse device response: 54,0.00#

20190728T140218 [BuoyancyServo]:getPosition uart error serial timeout

20190728T140218 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20190728T140218 [BuoyancyServo]:Communications Fault

20190728T140218 [CBIT]:Communications Fault in component: BuoyancyServo

20190728T150816 [ESPComponent]:[sample #10] ESP log summary report (2 messages):#@06:08:48.94 Selecting Cartridge 9#@07:05:58.91 Sampled 1000.0ml#

20190728T152751 [CTD_Seabird]:Failed to parse device response: 2.57,0#

20190728T162505 [CTD_Seabird]:Failed to parse device response: 2.90.00#

20190728T165846 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20190728T170247 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20190728T170911 [ESPComponent]:[sample #11] ESP log summary report (2 messages):#@08:12:08.16 Selecting Cartridge 8#@09:10:33.59 Sampled 1000.0ml#

20190728T170913 [Aanderaa_O2]:LCB fault: Software Overcurrent.

20190728T170913 [Aanderaa_O2]:Hardware Fault

20190728T170913 [CBIT]:Hardware Fault in component: Aanderaa_O2

20190728T171851 [CommandLine]:got command schedule clear

20190728T171851 [CommandLine]:#Cleared scheduled commands:0

20190728T171932 [Default:CheckIn:E]:Default mission has been running for 10.311427 min

20190728T171945 [CommandLine]:got command schedule resume

20190728T172256 [CommandLine]:got command schedule asap "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 8 hour;set sci2_flat_and_level.NeedCommsTime 45 minute;set sci2_flat_and_level.Lat1 36.803647 degree;set sci2_flat_and_level.Lon1 -121.961531 degree" aleu 1 2.000000

20190728T172256 [CommandLine]:Scheduling command #1 of 2 with id=aleu

20190728T172256 [CommandLine]:Scheduled #23 (#1 of 2 with id='aleu'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 8 hour;set sci2_flat_and_level.NeedCommsTime 45 minute;set sci2_flat_and_level.Lat1 36.803647 degree;set sci2_flat_and_level.Lon1 -121.961531 degree" ASAP

20190728T172311 [CommandLine]:got command schedule asap "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run " aleu 2 2.000000

20190728T172311 [CommandLine]:Scheduling command #2 of 2 with id=aleu

20190728T172311 [CommandLine]:Scheduled #24 (#2 of 2 with id='aleu'): "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run " ASAP

20190728T172311 [CommandLine]:got command load ./Missions/Science/sci2_flat_and_level.xml

20190728T172313 [CommandLine]:Loaded ./Missions/Science/sci2_flat_and_level.xml

20190728T172328 [CommandLine]:got command set sci2_flat_and_level.MissionTimeout 8.000000 hour

20190728T172328 [CommandLine]:got command set sci2_flat_and_level.NeedCommsTime 45.000000 minute

20190728T172328 [CommandLine]:got command set sci2_flat_and_level.Lat1 36.803646 degree

20190728T172328 [CommandLine]:got command set sci2_flat_and_level.Lon1 -121.961533 degree

20190728T172341 [CommandLine]:got command set sci2_flat_and_level.ApproachDepth 1.750000 meter

20190728T172341 [CommandLine]:got command set sci2_flat_and_level.ApproachSettleTimePreDive 3.000000 minute

20190728T172342 [MissionManager]:Started mission sci2_flat_and_level

20190728T172406 [CommandLine]:got command schedule "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute" alh8 1 2.000000

20190728T172406 [CommandLine]:Scheduling command #1 of 2 with id=alh8

20190728T172406 [CommandLine]:Scheduled #25 (#1 of 2 with id='alh8'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190728T172413 [CommandLine]:got command schedule "set esp_kiss.MaxDepth 15 meter;run " alh8 2 2.000000

20190728T172413 [CommandLine]:Scheduling command #2 of 2 with id=alh8

20190728T172413 [CommandLine]:Scheduled #26 (#2 of 2 with id='alh8'): "set esp_kiss.MaxDepth 15 meter;run "

20190728T172643 [ThrusterServo]:Thruster uart error: serial timeout

20190728T172643 [ThrusterServo]:Communications Fault

20190728T172643 [CBIT]:Communications Fault in component: ThrusterServo

20190728T172654 [CommandLine]:got command schedule "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.799650 degree;set sci2_flat_and_level.Lon1 -121.948723 degree" allu 1 2.000000

20190728T172654 [CommandLine]:Scheduling command #1 of 2 with id=allu

20190728T172654 [CommandLine]:Scheduled #27 (#1 of 2 with id='allu'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.799650 degree;set sci2_flat_and_level.Lon1 -121.948723 degree"

20190728T172701 [CommandLine]:got command schedule "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run " allu 2 2.000000

20190728T172701 [CommandLine]:Scheduling command #2 of 2 with id=allu

20190728T172701 [CommandLine]:Scheduled #28 (#2 of 2 with id='allu'): "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run "

20190728T172744 [CommandLine]:got command schedule "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute" almq 1 2.000000

20190728T172744 [CommandLine]:Scheduling command #1 of 2 with id=almq

20190728T172744 [CommandLine]:Scheduled #29 (#1 of 2 with id='almq'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190728T172751 [CommandLine]:got command schedule "set esp_kiss.MaxDepth 15 meter;run " almq 2 2.000000

20190728T172751 [CommandLine]:Scheduling command #2 of 2 with id=almq

20190728T172751 [CommandLine]:Scheduled #30 (#2 of 2 with id='almq'): "set esp_kiss.MaxDepth 15 meter;run "

20190728T180734 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20190728T181237 [CommandLine]:got command schedule "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.795838 degree;set sci2_flat_and_level.Lon1 -121.935496 degree" alpt 1 2.000000

20190728T181237 [CommandLine]:Scheduling command #1 of 2 with id=alpt

20190728T181237 [CommandLine]:Scheduled #31 (#1 of 2 with id='alpt'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.795838 degree;set sci2_flat_and_level.Lon1 -121.935496 degree"

20190728T181308 [CommandLine]:got command schedule "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run " alpt 2 2.000000

20190728T181308 [CommandLine]:Scheduling command #2 of 2 with id=alpt

20190728T181308 [CommandLine]:Scheduled #32 (#2 of 2 with id='alpt'): "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run "

20190728T181333 [CommandLine]:got command schedule "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute" alqh 1 2.000000

20190728T181333 [CommandLine]:Scheduling command #1 of 2 with id=alqh

20190728T181333 [CommandLine]:Scheduled #33 (#1 of 2 with id='alqh'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190728T181431 [CommandLine]:got command schedule "set esp_kiss.MaxDepth 15 meter;run " alqh 2 2.000000

20190728T181431 [CommandLine]:Scheduling command #2 of 2 with id=alqh

20190728T181431 [CommandLine]:Scheduled #34 (#2 of 2 with id='alqh'): "set esp_kiss.MaxDepth 15 meter;run "

20190728T181543 [NAL9602]:Verify xmit timeout failure.

20190728T181543 [CBIT]:Data Fault in component: NAL9602

20190728T181645 [CommandLine]:got command schedule "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.791389 degree;set sci2_flat_and_level.Lon1 -121.920738 degree" alrk 1 2.000000

20190728T181645 [CommandLine]:Scheduling command #1 of 2 with id=alrk

20190728T181645 [CommandLine]:Scheduled #35 (#1 of 2 with id='alrk'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.791389 degree;set sci2_flat_and_level.Lon1 -121.920738 degree"

20190728T181707 [CommandLine]:got command schedule "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run " alrk 2 2.000000

20190728T181707 [CommandLine]:Scheduling command #2 of 2 with id=alrk

20190728T181707 [CommandLine]:Scheduled #36 (#2 of 2 with id='alrk'): "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run "

20190728T181819 [NAL9602]:Verify xmit timeout failure.

20190728T181819 [CBIT]:Data Fault in component: NAL9602

20190728T181920 [CommandLine]:got command schedule "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute" als0 1 2.000000

20190728T181920 [CommandLine]:Scheduling command #1 of 2 with id=als0

20190728T181920 [CommandLine]:Scheduled #37 (#1 of 2 with id='als0'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190728T181936 [CommandLine]:got command schedule "set esp_kiss.MaxDepth 15 meter;run " als0 2 2.000000

20190728T181936 [CommandLine]:Scheduling command #2 of 2 with id=als0

20190728T181936 [CommandLine]:Scheduled #38 (#2 of 2 with id='als0'): "set esp_kiss.MaxDepth 15 meter;run "

20190728T181952 [CommandLine]:got command schedule "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.786479 degree;set sci2_flat_and_level.Lon1 -121.904203 degree" alsv 1 2.000000

20190728T181952 [CommandLine]:Scheduling command #1 of 2 with id=alsv

20190728T181952 [CommandLine]:Scheduled #39 (#1 of 2 with id='alsv'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.786479 degree;set sci2_flat_and_level.Lon1 -121.904203 degree"

20190728T182012 [CommandLine]:got command schedule "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run " alsv 2 2.000000

20190728T182012 [CommandLine]:Scheduling command #2 of 2 with id=alsv

20190728T182012 [CommandLine]:Scheduled #40 (#2 of 2 with id='alsv'): "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run "

20190728T182130 [NAL9602]:Inadequate Iridium signal strength reported: 0

20190728T182140 [NAL9602]:Inadequate Iridium signal strength reported: 0

20190728T182205 [CommandLine]:got command schedule "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute" altg 1 2.000000

20190728T182205 [CommandLine]:Scheduling command #1 of 2 with id=altg

20190728T182205 [CommandLine]:Scheduled #41 (#1 of 2 with id='altg'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190728T182215 [CommandLine]:got command schedule "set esp_kiss.MaxDepth 15 meter;run " altg 2 2.000000

20190728T182215 [CommandLine]:Scheduling command #2 of 2 with id=altg

20190728T182215 [CommandLine]:Scheduled #42 (#2 of 2 with id='altg'): "set esp_kiss.MaxDepth 15 meter;run "

20190728T184824 [CBIT]:Beginning ground fault scan

20190728T184858 [CTD_Seabird]:Failed to parse device response: 0.00#

20190728T192916 [CTD_Seabird]:Failed to parse device response: 2.74,15.3446,0.00#

20190728T195349 [CTD_Seabird]:Failed to parse device response: 2.91,00#

20190728T195817 [CommandLine]:got command schedule list

20190728T195817 [CommandLine]:Scheduled #25 (#1 of 2 with id='alh8'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190728T195817 [CommandLine]:Scheduled #26 (#2 of 2 with id='alh8'): "set esp_kiss.MaxDepth 15 meter;run "

20190728T195817 [CommandLine]:Scheduled #27 (#1 of 2 with id='allu'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.799650 degree;set sci2_flat_and_level.Lon1 -121.948723 degree"

20190728T195817 [CommandLine]:Scheduled #28 (#2 of 2 with id='allu'): "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run "

20190728T195817 [CommandLine]:Scheduled #29 (#1 of 2 with id='almq'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190728T195817 [CommandLine]:Scheduled #30 (#2 of 2 with id='almq'): "set esp_kiss.MaxDepth 15 meter;run "

20190728T195817 [CommandLine]:Scheduled #31 (#1 of 2 with id='alpt'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.795838 degree;set sci2_flat_and_level.Lon1 -121.935496 degree"

20190728T195817 [CommandLine]:Scheduled #32 (#2 of 2 with id='alpt'): "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run "

20190728T195817 [CommandLine]:Scheduled #33 (#1 of 2 with id='alqh'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190728T195817 [CommandLine]:Scheduled #34 (#2 of 2 with id='alqh'): "set esp_kiss.MaxDepth 15 meter;run "

20190728T195817 [CommandLine]:Scheduled #35 (#1 of 2 with id='alrk'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.791389 degree;set sci2_flat_and_level.Lon1 -121.920738 degree"

20190728T195817 [CommandLine]:Scheduled #36 (#2 of 2 with id='alrk'): "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run "

20190728T195817 [CommandLine]:Scheduled #37 (#1 of 2 with id='als0'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190728T195817 [CommandLine]:Scheduled #38 (#2 of 2 with id='als0'): "set esp_kiss.MaxDepth 15 meter;run "

20190728T195817 [CommandLine]:Scheduled #39 (#1 of 2 with id='alsv'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.786479 degree;set sci2_flat_and_level.Lon1 -121.904203 degree"

20190728T195817 [CommandLine]:Scheduled #40 (#2 of 2 with id='alsv'): "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run "

20190728T195817 [CommandLine]:Scheduled #41 (#1 of 2 with id='altg'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190728T195817 [CommandLine]:Scheduled #42 (#2 of 2 with id='altg'): "set esp_kiss.MaxDepth 15 meter;run "

20190728T203939 [ThrusterServo]:Overload Error

20190728T203939 [ThrusterServo]:Hardware Fault

20190728T203939 [CBIT]:Hardware Fault in component: ThrusterServo

20190728T210815 [CommandLine]:got command load ./Missions/Science/esp_kiss.xml

20190728T210816 [WetLabsBB2FL]:LCB fault: Software Overcurrent.

20190728T210816 [WetLabsBB2FL]:Hardware Fault

20190728T210816 [MissionManager]:Slate does not contain CTD_NeilBrown.bin_mean_sea_water_temperature

20190728T210816 [MissionManager]:Slate does not contain celsius

20190728T210816 [CBIT]:Hardware Fault in component: WetLabsBB2FL

20190728T210816 [Aanderaa_O2]:LCB fault: Software Overcurrent.

20190728T210816 [Aanderaa_O2]:Hardware Fault

20190728T210817 [CBIT]:Hardware Fault in component: Aanderaa_O2

20190728T210817 [CommandLine]:Loaded ./Missions/Science/esp_kiss.xml

20190728T210837 [CommandLine]:got command set esp_kiss.MissionTimeout 6.000000 hour

20190728T210837 [CommandLine]:got command set esp_kiss.ESPCartridgeType_2 nan count

20190728T210837 [CommandLine]:got command set esp_kiss.ApproachDepth 2.000000 meter

20190728T210837 [CommandLine]:got command set esp_kiss.ApproachSettleTimePreDive 3.000000 minute

20190728T210840 [CommandLine]:got command set esp_kiss.MaxDepth 15.000000 meter

20190728T210840 [MissionManager]:Started mission esp_kiss

20190728T210842 [esp_kiss:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20190728T224007 [CommandLine]:got command load ./Missions/Science/sci2_flat_and_level.xml

20190728T224009 [CommandLine]:Loaded ./Missions/Science/sci2_flat_and_level.xml

20190728T224010 [ThrusterServo]:Thruster uart error: serial timeout

20190728T224010 [ThrusterServo]:Communications Fault

20190728T224010 [CBIT]:Communications Fault in component: ThrusterServo

20190728T224026 [CommandLine]:got command set sci2_flat_and_level.MissionTimeout 6.000000 hour

20190728T224026 [CommandLine]:got command set sci2_flat_and_level.NeedCommsTime 30.000000 minute

20190728T224026 [CommandLine]:got command set sci2_flat_and_level.Lat1 36.799648 degree

20190728T224026 [CommandLine]:got command set sci2_flat_and_level.Lon1 -121.948723 degree

20190728T224038 [CommandLine]:got command set sci2_flat_and_level.ApproachDepth 1.750000 meter

20190728T224038 [CommandLine]:got command set sci2_flat_and_level.ApproachSettleTimePreDive 3.000000 minute

20190728T224038 [MissionManager]:Started mission sci2_flat_and_level

20190728T225059 [NAL9602]:Inadequate Iridium signal strength reported: 0

20190728T230017 [CTD_Seabird]:Failed to parse device response: 2.58,00#

20190728T230200 [CommandLine]:got command set esp_kiss.ESPCartridgeType_2 nan count

20190728T232054 [CTD_Seabird]:Failed to parse device response: 0.07.00#

20190728T235619 [ESPComponent]:[sample #13] ESP log summary report (4 messages):#@16:21:06.38 Selecting Cartridge 6#@16:42:47.46 Cartridge::Sampler::Clogged in FILTERING -- Cartridge clogged#@16:42:47.66 Sampled 325.0ml#@16:50:39.84 Syringe::Underpressure in PROCESSING -- Reached only 0.1 of 30.0psi after pumping 15575ul#

20190729T001814 [CommandLine]:got command set esp_kiss.ESPCartridgeType_2 nan count

20190729T003049 [CTD_Seabird]:Failed to parse device response: 3.06,15.6961,#

20190729T005520 [BuoyancyServo]:getPosition uart error serial timeout

20190729T005520 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20190729T005520 [BuoyancyServo]:Communications Fault

20190729T005520 [CBIT]:Communications Fault in component: BuoyancyServo

20190729T012224 [CTD_Seabird]:Failed to parse device response: 54,0.00#

20190729T020201 [BPC1]:BPC1A: No match for serial number FFFF in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20190729T020219 [WetLabsBB2FL]:LCB fault: Software Overcurrent.

20190729T020219 [WetLabsBB2FL]:Hardware Fault

20190729T020219 [CBIT]:Hardware Fault in component: WetLabsBB2FL

20190729T020320 [CommandLine]:got command schedule list

20190729T020320 [CommandLine]:Scheduled #37 (#1 of 2 with id='als0'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190729T020320 [CommandLine]:Scheduled #38 (#2 of 2 with id='als0'): "set esp_kiss.MaxDepth 15 meter;run "

20190729T020320 [CommandLine]:Scheduled #39 (#1 of 2 with id='alsv'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 6 hour;set sci2_flat_and_level.NeedCommsTime 30 minute;set sci2_flat_and_level.Lat1 36.786479 degree;set sci2_flat_and_level.Lon1 -121.904203 degree"

20190729T020320 [CommandLine]:Scheduled #40 (#2 of 2 with id='alsv'): "set sci2_flat_and_level.ApproachDepth 1.75 meter;set sci2_flat_and_level.ApproachSettleTimePreDive 3 minute;run "

20190729T020320 [CommandLine]:Scheduled #41 (#1 of 2 with id='altg'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 6 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190729T020320 [CommandLine]:Scheduled #42 (#2 of 2 with id='altg'): "set esp_kiss.MaxDepth 15 meter;run "

20190729T024408 [WetLabsBB2FL]:LCB fault: Software Overcurrent.

20190729T024408 [WetLabsBB2FL]:Hardware Fault

20190729T024408 [CBIT]:Hardware Fault in component: WetLabsBB2FL

20190729T033123 [BuoyancyServo]:getPosition uart error serial timeout

20190729T033123 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20190729T033123 [BuoyancyServo]:Communications Fault

20190729T033123 [CBIT]:Communications Fault in component: BuoyancyServo

20190729T040424 [CTD_Seabird]:Failed to parse device response: 2.69,15.40.00#

20190729T041542 [CTD_Seabird]:Failed to parse device response: 2.66,15.068.00#

20190729T045326 [CommandLine]:got command schedule clear

20190729T045326 [CommandLine]:#Cleared scheduled commands:2

20190729T052831 [CommandLine]:got command stop

20190729T052831 [CommandLine]:Scheduling is paused

20190729T052907 [CommandLine]:got command schedule resume

20190729T052907 [CommandLine]:Scheduling is resumed

20190729T052933 [CommandLine]:got command schedule "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 3 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute" bhrv 1 2.000000

20190729T052933 [CommandLine]:Scheduling command #1 of 2 with id=bhrv

20190729T052933 [CommandLine]:Scheduled #43 (#1 of 2 with id='bhrv'): "load Science/esp_kiss.xml;set esp_kiss.MissionTimeout 3 hour;set esp_kiss.ESPCartridgeType_1 -9 count;set esp_kiss.ESPCartridgeType_2 NaN count;set esp_kiss.ApproachDepth 2 meter;set esp_kiss.ApproachSettleTimePreDive 3 minute"

20190729T052956 [CommandLine]:got command schedule "set esp_kiss.MaxDepth 15 meter;run " bhrv 2 2.000000

20190729T052956 [CommandLine]:Scheduling command #2 of 2 with id=bhrv

20190729T052956 [CommandLine]:Scheduled #44 (#2 of 2 with id='bhrv'): "set esp_kiss.MaxDepth 15 meter;run "

20190729T053014 [CommandLine]:got command schedule

20190729T053014 [CommandLine]:Incomplete syntax. Try: help schedule

20190729T053049 [CommandLine]:got command schedule "set profile_station.YoYoMaxDepth 30 meter;set profile_station.MaxDepth 35 meter;run " bhuu 2 2.000000

20190729T053049 [CommandLine]:Scheduling command #2 of 2 with id=bhuu

20190729T053049 [CommandLine]:Scheduled #45 (#2 of 2 with id='bhuu'): "set profile_station.YoYoMaxDepth 30 meter;set profile_station.MaxDepth 35 meter;run "

20190729T053557 [CTD_Seabird]:Failed to parse device response: 0.11,15.59720,0.00#

20190729T062852 [CTD_Seabird]:Failed to parse device response: 49,0.00#

20190729T072137 [CommandLine]:got command schedule resume

20190729T073216 [Default:CheckIn:E]:Default mission has been running for 12.271945 min

20190729T073234 [CommandLine]:got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 6 hour;set profile_station.NeedCommsTime 30 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" boo2 1 2.000000

20190729T073234 [CommandLine]:Scheduling command #1 of 2 with id=boo2

20190729T073234 [CommandLine]:Scheduled #46 (#1 of 2 with id='boo2'): "load Science/profile_station.xml;set profile_station.MissionTimeout 6 hour;set profile_station.NeedCommsTime 30 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" ASAP

20190729T073252 [CommandLine]:got command schedule asap "set profile_station.YoYoMaxDepth 30 meter;set profile_station.MaxDepth 35 meter;run " boo2 2 2.000000

20190729T073252 [CommandLine]:Scheduling command #2 of 2 with id=boo2

20190729T073252 [CommandLine]:Scheduled #47 (#2 of 2 with id='boo2'): "set profile_station.YoYoMaxDepth 30 meter;set profile_station.MaxDepth 35 meter;run " ASAP

20190729T073252 [CommandLine]:got command load ./Missions/Science/profile_station.xml

20190729T073253 [CommandLine]:Loaded ./Missions/Science/profile_station.xml

20190729T073307 [CommandLine]:got command set profile_station.MissionTimeout 6.000000 hour

20190729T073307 [CommandLine]:got command set profile_station.NeedCommsTime 30.000000 minute

20190729T073307 [CommandLine]:got command set profile_station.Lat 36.797001 degree

20190729T073307 [CommandLine]:got command set profile_station.Lon -121.847000 degree

20190729T073314 [CommandLine]:got command set profile_station.YoYoMaxDepth 30.000000 meter

20190729T073314 [CommandLine]:got command set profile_station.MaxDepth 35.000000 meter

20190729T073315 [MissionManager]:Started mission profile_station

20190729T073316 [profile_station:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20190729T111547 [CTD_Seabird]:Failed to parse device response: 2.84,13.07015,0.00#

20190729T113447 [CTD_Seabird]:Failed to parse device response: 21.84,13.0.00#

20190729T121810 [ThrusterServo]:Invalid EZ Servo response:"#"

20190729T121811 [ThrusterServo]:LCB fault: Software Overcurrent.

20190729T121811 [ThrusterServo]:Hardware Fault

20190729T133259 [CommandLine]:got command stop

20190729T133259 [CommandLine]:Scheduling is paused for 1 commands

20190729T134110 [Default:CheckIn:E]:Default mission has been running for 8.161637 min