makai Path

trajectory

20190602T165521 [CommandLine]:got command restart logs

20190602T165525 [NAL9602]:parseGSV uart error: serial buffer full

20190602T165540 [CommandLine]:got command schedule "load Science/circle_acoustic_contact.xml;set circle_acoustic_contact.NeedCommsTime 30 minute;set circle_acoustic_contact.AcousticContactTimeout 20 minute;set circle_acoustic_contact.ContactLabel 1 count" 2k0iw 1 3.000000

20190602T165540 [CommandLine]:Scheduling command #1 of 3 with id=2k0iw

20190602T165540 [CommandLine]:Scheduled #66 (#1 of 3 with id='2k0iw'): "load Science/circle_acoustic_contact.xml;set circle_acoustic_contact.NeedCommsTime 30 minute;set circle_acoustic_contact.AcousticContactTimeout 20 minute;set circle_acoustic_contact.ContactLabel 1 count"

20190602T165540 [CommandLine]:Scheduling was paused by a command at 2019-06-02T16:05:37Z

20190602T165559 [CommandLine]:got command schedule "set circle_acoustic_contact.ContactDepth 0 meter;set circle_acoustic_contact.CenterLatitude 36.71211 degree;set circle_acoustic_contact.CenterLongitude -122.187028 degree;set circle_acoustic_contact.OuterCircleRadius 30 meter" 2k0iw 2 3.000000

20190602T165559 [CommandLine]:Scheduling command #2 of 3 with id=2k0iw

20190602T165559 [CommandLine]:Scheduled #67 (#2 of 3 with id='2k0iw'): "set circle_acoustic_contact.ContactDepth 0 meter;set circle_acoustic_contact.CenterLatitude 36.71211 degree;set circle_acoustic_contact.CenterLongitude -122.187028 degree;set circle_acoustic_contact.OuterCircleRadius 30 meter"

20190602T165559 [CommandLine]:Scheduling was paused by a command at 2019-06-02T16:05:37Z

20190602T165619 [CommandLine]:got command schedule "set circle_acoustic_contact.InnerCircleRadius 30 meter;set circle_acoustic_contact.TrackingUpdatePeriod 30 second;set circle_acoustic_contact.YoYoMaxDepth 50 meter;set circle_acoustic_contact.Speed 0.8 meter_per_second;run " 2k0iw 3 3.000000

20190602T165619 [CommandLine]:Scheduling command #3 of 3 with id=2k0iw

20190602T165619 [CommandLine]:Scheduled #68 (#3 of 3 with id='2k0iw'): "set circle_acoustic_contact.InnerCircleRadius 30 meter;set circle_acoustic_contact.TrackingUpdatePeriod 30 second;set circle_acoustic_contact.YoYoMaxDepth 50 meter;set circle_acoustic_contact.Speed 0.8 meter_per_second;run "

20190602T165619 [CommandLine]:Scheduling was paused by a command at 2019-06-02T16:05:37Z

20190602T165949 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190602T170017 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190602T170043 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190602T170140 [NAL9602]:Inadequate Iridium signal strength reported: 0

20190602T170735 [Default:CheckIn:E]:Default mission has been running for 13.684248 min

20190602T170739 [NAL9602]:parseGSV uart error: serial buffer full

20190602T170755 [CommandLine]:got command schedule resume

20190602T170755 [CommandLine]:Scheduling is resumed

20190602T170755 [CommandLine]:got command load ./Missions/Science/circle_acoustic_contact.xml

20190602T170756 [CommandLine]:Loaded ./Missions/Science/circle_acoustic_contact.xml

20190602T170817 [CommandLine]:got command set circle_acoustic_contact.NeedCommsTime 30.000000 minute

20190602T170817 [CommandLine]:got command set circle_acoustic_contact.AcousticContactTimeout 20.000000 minute

20190602T170817 [CommandLine]:got command set circle_acoustic_contact.ContactLabel 1.000000 count

20190602T170839 [CommandLine]:got command set circle_acoustic_contact.ContactDepth 0.000000 meter

20190602T170839 [CommandLine]:got command set circle_acoustic_contact.CenterLatitude 36.712109 degree

20190602T170839 [CommandLine]:got command set circle_acoustic_contact.CenterLongitude -122.187027 degree

20190602T170839 [CommandLine]:got command set circle_acoustic_contact.OuterCircleRadius 30.000000 meter

20190602T170900 [CommandLine]:got command set circle_acoustic_contact.InnerCircleRadius 30.000000 meter

20190602T170900 [CommandLine]:got command set circle_acoustic_contact.TrackingUpdatePeriod 30.000000 second

20190602T170900 [CommandLine]:got command set circle_acoustic_contact.YoYoMaxDepth 50.000000 meter

20190602T170900 [CommandLine]:got command set circle_acoustic_contact.Speed 0.800000 meter_per_second

20190602T170900 [CommandLine]:got command run

20190602T170900 [CommandLine]:Running

20190602T170900 [MissionManager]:Started mission circle_acoustic_contact

20190602T170900 [circle_acoustic_contact:AbortDrift:B.AbortDrift]:Acoustic timeout set to: 0.33 hours.

20190602T170902 [circle_acoustic_contact:YoYos:B.AltitudeEnvelope]:Altitude Measurement is not Active.

20190602T170904 [CTD_Seabird]:Failed to parse device response: #

20190602T171349 [DAT]:No response from remote modem.

20190602T171402 [DAT]:No response from remote modem.

20190602T172507 [CTD_Seabird]:Failed to parse device response: .00#

20190602T173448 [DAT]:Communications Fault

20190602T173448 [CBIT]:Communications Fault in component: DAT

20190602T173449 [DAT]:LCB fault: Software Overcurrent.

20190602T173449 [DAT]:Hardware Fault

20190602T173452 [CommandLine]:got command ! echo 1 > /dev/loadB2

20190602T174008 [CTD_Seabird]:Salinity reading out of range: 21.621130 psu

20190602T174038 [NAL9602]:parseGSV uart error: serial buffer full

20190602T174327 [Aanderaa_O2]:Faild to get valid response or reached max message skip count.

20190602T174402 [Aanderaa_O2]:Faild to get valid response or reached max message skip count.

20190602T174651 [DAT]:Communications Fault

20190602T174651 [CBIT]:Communications Fault in component: DAT

20190602T174655 [CommandLine]:got command ! echo 1 > /dev/loadB2

20190602T174721 [DAT]:Communications Fault

20190602T174721 [CBIT]:Communications Fault in component: DAT

20190602T174725 [CommandLine]:got command ! echo 1 > /dev/loadB2

20190602T175332 [CTD_Seabird]:Failed to parse device response: 3.73,13.23154,0.00#

20190602T175856 [CTD_Seabird]:Failed to parse device response: 04,0.00#

20190602T180924 [DAT]:unknown deviceResponse_: uisition stats SNR:-05.3 MPD:10.6 SPD:+11.3##

20190602T180924 [DAT]:unknown deviceResponse_: Header stats CRC:Fail PSNR:05.3 CCERR:003 Mod:MFSK##

20190602T181713 [DAT]:No response from remote modem.

20190602T181715 [CommandLine]:got command schedule asap "load Science/smear_yoyo_sampling.xml;set Smear.MissionTimeout 7 hour;set Smear.BeingInterrogatedTimeout 1 hour;set Smear.TrackAcousticTarget 1 bool;set Smear.AcousticTargetContactLabel 1 count;set Smear.AcousticTargetDepth 0 meter" 2k3rb 1 4.000000

20190602T181715 [CommandLine]:Scheduling command #1 of 4 with id=2k3rb

20190602T181715 [CommandLine]:Scheduled #69 (#1 of 4 with id='2k3rb'): "load Science/smear_yoyo_sampling.xml;set Smear.MissionTimeout 7 hour;set Smear.BeingInterrogatedTimeout 1 hour;set Smear.TrackAcousticTarget 1 bool;set Smear.AcousticTargetContactLabel 1 count;set Smear.AcousticTargetDepth 0 meter" ASAP

20190602T181739 [CommandLine]:got command schedule asap "set Smear.MaxWaitNoFiring 2.5 hour;set Smear.SpeedSampling 0.8 meter_per_second;set Smear.MaxDepth 295 meter;set Smear.CenterLatitude 36.71211 degree;set Smear.CenterLongitude -122.187028 degree" 2k3rb 2 4.000000

20190602T181739 [CommandLine]:Scheduling command #2 of 4 with id=2k3rb

20190602T181739 [CommandLine]:Scheduled #70 (#2 of 4 with id='2k3rb'): "set Smear.MaxWaitNoFiring 2.5 hour;set Smear.SpeedSampling 0.8 meter_per_second;set Smear.MaxDepth 295 meter;set Smear.CenterLatitude 36.71211 degree;set Smear.CenterLongitude -122.187028 degree" ASAP

20190602T181822 [CommandLine]:got command schedule asap "set Smear.ShallowBoundSmear1 55 meter;set Smear.ShallowBoundSmear2 115 meter;set Smear.ShallowBoundSmear3 250 meter;set Smear.ThicknessSmear1 5 meter;set Smear.ThicknessSmear2 5 meter;set Smear.ThicknessSmear3 5 meter" 2k3rb 3 4.000000

20190602T181822 [CommandLine]:Scheduling command #3 of 4 with id=2k3rb

20190602T181822 [CommandLine]:Scheduled #71 (#3 of 4 with id='2k3rb'): "set Smear.ShallowBoundSmear1 55 meter;set Smear.ShallowBoundSmear2 115 meter;set Smear.ShallowBoundSmear3 250 meter;set Smear.ThicknessSmear1 5 meter;set Smear.ThicknessSmear2 5 meter;set Smear.ThicknessSmear3 5 meter" ASAP

20190602T181916 [CommandLine]:got command schedule asap "set Smear.Wait1 30 minute;set Smear.Wait2 0 minute;set Smear.Wait3 0 minute;set Smear.TrackingUpdatePeriod 25 second;set Smear.NumberOfStartingFixesToIgnore 2 count;set Smear.CylinderCircleMaxError 50 meter;run " 2k3rb 4 4.000000

20190602T181916 [CommandLine]:Scheduled #72 (#4 of 4 with id='2k3rb'): "set Smear.Wait1 30 minute;set Smear.Wait2 0 minute;set Smear.Wait3 0 minute;set Smear.TrackingUpdatePeriod 25 second;set Smear.NumberOfStartingFixesToIgnore 2 count;set Smear.CylinderCircleMaxError 50 meter;run " ASAP

20190602T181916 [CommandLine]:got command load ./Missions/Science/smear_yoyo_sampling.xml

20190602T181925 [CommandLine]:Loaded ./Missions/Science/smear_yoyo_sampling.xml

20190602T181925 [MissionManager]:Started mission Default

20190602T181943 [CommandLine]:got command set Smear.MissionTimeout 7.000000 hour

20190602T181943 [CommandLine]:got command set Smear.BeingInterrogatedTimeout 1.000000 hour

20190602T181943 [CommandLine]:got command set Smear.TrackAcousticTarget 1.000000 bool

20190602T181943 [CommandLine]:got command set Smear.AcousticTargetContactLabel 1.000000 count

20190602T181943 [CommandLine]:got command set Smear.AcousticTargetDepth 0.000000 meter

20190602T181956 [CommandLine]:got command set Smear.MaxWaitNoFiring 2.500000 hour

20190602T181956 [CommandLine]:got command set Smear.SpeedSampling 0.800000 meter_per_second

20190602T181956 [CommandLine]:got command set Smear.MaxDepth 295.000000 meter

20190602T181956 [CommandLine]:got command set Smear.CenterLatitude 36.712109 degree

20190602T181956 [CommandLine]:got command set Smear.CenterLongitude -122.187027 degree

20190602T182018 [CommandLine]:got command set Smear.ShallowBoundSmear1 55.000000 meter

20190602T182018 [CommandLine]:got command set Smear.ShallowBoundSmear2 115.000000 meter

20190602T182018 [CommandLine]:got command set Smear.ShallowBoundSmear3 250.000000 meter

20190602T182018 [CommandLine]:got command set Smear.ThicknessSmear1 5.000000 meter

20190602T182018 [CommandLine]:got command set Smear.ThicknessSmear2 5.000000 meter

20190602T182018 [CommandLine]:got command set Smear.ThicknessSmear3 5.000000 meter

20190602T182036 [CommandLine]:got command set Smear.Wait1 30.000000 minute

20190602T182036 [CommandLine]:got command set Smear.Wait2 0.000000 minute

20190602T182036 [CommandLine]:got command set Smear.Wait3 0.000000 minute

20190602T182036 [CommandLine]:got command set Smear.TrackingUpdatePeriod 25.000000 second

20190602T182036 [CommandLine]:got command set Smear.NumberOfStartingFixesToIgnore 2.000000 count

20190602T182036 [CommandLine]:got command set Smear.CylinderCircleMaxError 50.000000 meter

20190602T182036 [CommandLine]:got command run

20190602T182036 [CommandLine]:Running

20190602T182036 [MissionManager]:Started mission Smear

20190602T182036 [Smear:AbortDrift:B.AbortDrift]:Acoustic timeout set to: 1.00 hours.

20190602T182039 [Smear:I.AltitudeEnvelope]:Altitude Measurement is not Active.

20190602T182039 [Smear:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20190602T182040 [CTD_Seabird]:Failed to parse device response: #

20190602T182539 [Aanderaa_O2]:Faild to get valid response or reached max message skip count.

20190602T182645 [Smear:Cylinder:CylinderYoYo:A]:Yoyo profile on a cylinder around location 36.712110 arcdeg , -122.187030 arcdeg , at radius = 20.000000 m .

20190602T183121 [CTD_Seabird]:Failed to parse device response: 24,0.00#

20190602T183146 [Smear:TakeSamples:Firing:B]:Taking ESP sample No. 1.000000 count .

20190602T183148 [Smear:InsertWait:A]:Wait 30.000000 min before firing sample.

20190602T185409 [DAT]:LCB fault: Software Overcurrent.

20190602T185409 [DAT]:Hardware Fault

20190602T185504 [CBIT]:Beginning ground fault scan

20190602T185924 [DAT]:LCB fault: Software Overcurrent.

20190602T185924 [DAT]:Hardware Fault

20190602T190150 [Smear:ESPSampling:TriggerESP:D]:Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 55.137833 m , 9.941888 degC , 0.125400 ug/l .

20190602T190152 [ESPComponent]:Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.5.2:10.89.5.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8

20190602T190152 [ESPComponent]:Waiting for ESP to connect (timeout=150.0000)

20190602T190226 [ESPComponent]:ESP has connected as client

20190602T190226 [ESPComponent]:[sample #10] Explicit cartridge argument not given

20190602T190226 [ESPComponent]:[sample #10] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT

20190602T190227 [Smear:ESPSampling:TriggerESP:F]:Wait for ESP sampling to complete.

20190602T190227 [ESPComponent]:[sample #10] ESP sampling state: S_PREPARING_SHOW_LOG

20190602T190228 [ESPComponent]:[sample #10] ESP sampling state: S_PREPARING_SHOW_STATUS

20190602T190230 [ESPComponent]:[sample #10] ESP sampling state: S_LOADING_CARTRIDGE

20190602T190302 [ESPComponent]:[sample #10] ESP sampling state: S_WAITING_FOR_PRIMING (@43)

20190602T190304 [ESPComponent]:[sample #10] ESP sampling state: S_PRIMING (@0.0)

20190602T190305 [ESPComponent]:[sample #10] ESP sampling state: S_WAITING_FOR_FILTERING (@0.0)

20190602T190544 [ESPComponent]:[sample #10] ESP sampling state: S_FILTERING (@0.0)

20190602T190544 [ESPComponent]:[sample #10] ESP sampling state: S_WAITING_FOR_PAUSED (@0.0)

20190602T190545 [DAT]:unknown deviceResponse_: tats SNR:22.3 MPD:08.3 SPD:+01.6##

20190602T190545 [DAT]:unknown deviceResponse_: Header stats CRC:Fail PSNR:03.5 CCERR:003 Mod:MFSK##

20190602T191256 [CTD_Seabird]:Failed to parse device response: 59.30,9.0.00#

20190602T192618 [DAT]:unknown deviceResponse_: Header stats CRC:Fail PSNR:04.9 CCERR:003 Mod:MFSK##

20190602T194609 [ESPComponent]:[sample #10] ESP sampling state: S_PAUSED (@1000.0)

20190602T194610 [ESPComponent]:[sample #10] ESP sampling state: S_PROCESSING (@1000.0)

20190602T194612 [ESPComponent]:[sample #10] ESP sampling state: S_WAITING_FOR_PROCESSED (@43)

20190602T195737 [ESPComponent]:[sample #10] ESP sampling state: S_STOPPING (@43)

20190602T195802 [ESPComponent]:[sample #10] ESP sampling sequence completed normally.

20190602T195802 [ESPComponent]:[sample #10] ESP log summary report (2 messages):#@12:02:39.45 Selecting Cartridge 43#@12:46:03.69 Sampled 1000.0ml#

20190602T195803 [Smear:TakeSamples:Firing:G]:ESP sample No. 1.000000 count completed.

20190602T200159 [BPC1]:Battery stick #38 (s/n: 0139) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20190602T200159 [BPC1]:Battery stick #39 (s/n: 00F0) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20190602T200253 [Smear:TakeSamples:Firing:B]:Taking ESP sample No. 2.000000 count .

20190602T200254 [Smear:InsertWait:A]:Wait 0.000000 min before firing sample.

20190602T200257 [Smear:ESPSampling:TriggerESP:D]:Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 115.489952 m , 9.045007 degC , 0.022800 ug/l .

20190602T200258 [ESPComponent]:Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.5.2:10.89.5.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8

20190602T200258 [ESPComponent]:Waiting for ESP to connect (timeout=150.0000)

20190602T200329 [ESPComponent]:ESP has connected as client

20190602T200330 [ESPComponent]:[sample #11] Explicit cartridge argument not given

20190602T200330 [ESPComponent]:[sample #11] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT

20190602T200331 [Smear:ESPSampling:TriggerESP:F]:Wait for ESP sampling to complete.

20190602T200331 [ESPComponent]:[sample #11] ESP sampling state: S_PREPARING_SHOW_LOG

20190602T200331 [ESPComponent]:[sample #11] ESP sampling state: S_PREPARING_SHOW_STATUS

20190602T200333 [ESPComponent]:[sample #11] ESP sampling state: S_LOADING_CARTRIDGE

20190602T200406 [ESPComponent]:[sample #11] ESP sampling state: S_WAITING_FOR_PRIMING (@42)

20190602T200408 [ESPComponent]:[sample #11] ESP sampling state: S_PRIMING (@0.0)

20190602T200409 [ESPComponent]:[sample #11] ESP sampling state: S_WAITING_FOR_FILTERING (@0.0)

20190602T200636 [ESPComponent]:[sample #11] ESP sampling state: S_FILTERING (@0.0)

20190602T200636 [ESPComponent]:[sample #11] ESP sampling state: S_WAITING_FOR_PAUSED (@0.0)

20190602T200739 [DAT]:unknown deviceResponse_: CRC:Fail PSNR:06.2 CCERR:004 Mod:MFSK##

20190602T201159 [DAT]:unknown deviceResponse_: ader stats CRC:Fail PSNR:04.1 CCERR:003 Mod:MFSK##

20190602T202109 [DAT]:LCB fault: LCB Watchdog Reset. Invalid Command. Hardware Overcurrent Shutdown. Software Overcurrent.

20190602T202659 [DAT]:unknown deviceResponse_: ats CRC:Fail PSNR:04.4 CCERR:002 Mod:MFSK##

20190602T203700 [DAT]:unknown deviceResponse_: 6##

20190602T203930 [DAT]:unknown deviceResponse_: SPD:-07.8##

20190602T204709 [ESPComponent]:[sample #11] ESP sampling state: S_PAUSED (@1000.0)

20190602T204710 [ESPComponent]:[sample #11] ESP sampling state: S_PROCESSING (@1000.0)

20190602T204712 [ESPComponent]:[sample #11] ESP sampling state: S_WAITING_FOR_PROCESSED (@42)

20190602T205837 [ESPComponent]:[sample #11] ESP sampling state: S_STOPPING (@42)

20190602T205902 [ESPComponent]:[sample #11] ESP sampling sequence completed normally.

20190602T205903 [ESPComponent]:[sample #11] ESP log summary report (2 messages):#@13:03:43.52 Selecting Cartridge 42#@13:47:03.75 Sampled 1000.0ml#

20190602T205903 [Smear:TakeSamples:Firing:G]:ESP sample No. 2.000000 count completed.

20190602T210418 [Aanderaa_O2]:No communication! Re-starting

20190602T210418 [Aanderaa_O2]:Communications Fault

20190602T210418 [CBIT]:Communications Fault in component: Aanderaa_O2

20190602T210434 [Aanderaa_O2]:No communication! Re-starting

20190602T210434 [Aanderaa_O2]:Communications Fault

20190602T210434 [CBIT]:Communications Fault in component: Aanderaa_O2

20190602T210450 [Aanderaa_O2]:No communication! Re-starting

20190602T210450 [Aanderaa_O2]:Communications Fault

20190602T210450 [CBIT]:Communications Fault in component: Aanderaa_O2

20190602T211030 [Smear:TakeSamples:Firing:B]:Taking ESP sample No. 3.000000 count .

20190602T211031 [Smear:InsertWait:A]:Wait 0.000000 min before firing sample.

20190602T211034 [Smear:ESPSampling:TriggerESP:D]:Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 250.588486 m , 7.658105 degC , 0.079800 ug/l .

20190602T211035 [ESPComponent]:Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.5.2:10.89.5.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8

20190602T211035 [ESPComponent]:Waiting for ESP to connect (timeout=150.0000)

20190602T211107 [ESPComponent]:ESP has connected as client

20190602T211107 [ESPComponent]:[sample #12] Explicit cartridge argument not given

20190602T211107 [ESPComponent]:[sample #12] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT

20190602T211108 [Smear:ESPSampling:TriggerESP:F]:Wait for ESP sampling to complete.

20190602T211108 [ESPComponent]:[sample #12] ESP sampling state: S_PREPARING_SHOW_LOG

20190602T211109 [ESPComponent]:[sample #12] ESP sampling state: S_PREPARING_SHOW_STATUS

20190602T211111 [ESPComponent]:[sample #12] ESP sampling state: S_LOADING_CARTRIDGE

20190602T211143 [ESPComponent]:[sample #12] ESP sampling state: S_WAITING_FOR_PRIMING (@41)

20190602T211145 [ESPComponent]:[sample #12] ESP sampling state: S_PRIMING (@0.0)

20190602T211146 [ESPComponent]:[sample #12] ESP sampling state: S_WAITING_FOR_FILTERING (@0.0)

20190602T211416 [ESPComponent]:[sample #12] ESP sampling state: S_FILTERING (@0.0)

20190602T211416 [ESPComponent]:[sample #12] ESP sampling state: S_WAITING_FOR_PAUSED (@0.0)

20190602T212440 [Aanderaa_O2]:LCB fault: Invalid Command.

20190602T212440 [Aanderaa_O2]:Hardware Fault

20190602T212705 [Aanderaa_O2]:LCB fault: Software Overcurrent.

20190602T212705 [Aanderaa_O2]:Hardware Fault

20190602T213333 [Aanderaa_O2]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20190602T213333 [Aanderaa_O2]:Hardware Fault

20190602T213421 [Aanderaa_O2]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20190602T214049 [Aanderaa_O2]:LCB fault: LCB Watchdog Reset. Invalid Command. Hardware Overcurrent Shutdown. Software Overcurrent.

20190602T215448 [DAT]:unknown deviceResponse_: Unsupported packet type received!##

20190602T215748 [DAT]:unknown deviceResponse_: Unsupported packet type received!##

20190602T215923 [ESPComponent]:[sample #12] ESP sampling state: S_PAUSED (@1000.0)

20190602T215923 [ESPComponent]:[sample #12] ESP sampling state: S_PROCESSING (@1000.0)

20190602T215925 [ESPComponent]:[sample #12] ESP sampling state: S_WAITING_FOR_PROCESSED (@41)