galene Path

trajectory

20250630T074503 [NAL9602]:Queried for signal strength and failed to receive proper response.

20250630T074605 [BPC1]:Failed to receive data from all battery packs.

20250630T074605 [BPC1]:Communications Fault

20250630T074605 [CBIT]:Communications Fault in component: BPC1

20250630T074830 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250630T075508 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250630T075529 [CommandExec]:got command load ./Missions/Transport/keepstation.tl

20250630T075532 [CommandExec]:Loaded ./Missions/Transport/keepstation.tl id=keepstation

20250630T075546 [CommandExec]:got command set keepstation.MissionTimeout 10 hour

20250630T075546 [CommandExec]:got command set keepstation.NeedCommsTime 60 minute

20250630T075546 [CommandExec]:got command set keepstation.Latitude 36.797 degree

20250630T075546 [CommandExec]:got command set keepstation.Longitude -121.847 degree

20250630T075546 [CommandExec]:got command set keepstation.Speed 0.8 meter_per_second

20250630T075546 [CommandExec]:got command run

20250630T075546 [CommandExec]:Running

20250630T075547 [MissionManager]:Started mission keepstation

20250630T075549 [keepstation:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20250630T075559 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250630T080324 [BPC1]:Failed to receive data from all battery packs.

20250630T080324 [BPC1]:Communications Fault

20250630T080324 [CBIT]:Communications Fault in component: BPC1

20250630T080340 [keepstation:TransitToStation:Wpt1.Waypoint]:Navigating to waypoint: 36.797001,-121.847000

20250630T080426 [BuoyancyServo]:getPosition uart error serial timeout

20250630T080426 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20250630T080426 [BuoyancyServo]:Communications Fault

20250630T080427 [CBIT]:Communications Fault in component: BuoyancyServo

20250630T080840 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250630T082040 [BPC1]:Failed to receive data from all battery packs.

20250630T082040 [BPC1]:Communications Fault

20250630T082040 [CBIT]:Communications Fault in component: BPC1

20250630T083850 [CBIT]:Main Battery Failure

20250630T090804 [NAL9602]:Inadequate Iridium signal strength reported: 0

20250630T090807 [NAL9602]:Inadequate Iridium signal strength reported: 0

20250630T090816 [NAL9602]:Inadequate Iridium signal strength reported: 0

20250630T093850 [CBIT]:Main Battery Failure

20250630T102140 [CommandExec]:Scheduling is paused

20250630T102140 [MissionManager]:Started mission Default

20250630T103038 [Default:CheckIn:E]:Default mission has been running for 8.948875 min

20250630T103638 [Default:CheckIn:E]:Default mission has been running for 14.948951 min

20250630T103850 [CBIT]:Main Battery Failure

20250630T104238 [Default:CheckIn:E]:Default mission has been running for 20.948806 min

20250630T112345 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250630T112514 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20250630T114201 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250630T114916 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20250630T120925 [CommandExec]:got command load ./Missions/Transport/keepstation.tl

20250630T120927 [CommandExec]:Loaded ./Missions/Transport/keepstation.tl id=keepstation

20250630T120942 [CommandExec]:got command set keepstation.MissionTimeout 10 hour

20250630T120942 [CommandExec]:got command set keepstation.NeedCommsTime 60 minute

20250630T120942 [CommandExec]:got command set keepstation.Latitude 36.797 degree

20250630T120942 [CommandExec]:got command set keepstation.Longitude -121.847 degree

20250630T120943 [CommandExec]:got command set keepstation.Speed 0.75 meter_per_second

20250630T120943 [CommandExec]:got command run

20250630T120943 [CommandExec]:Running

20250630T120943 [MissionManager]:Started mission keepstation

20250630T120944 [keepstation:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20250630T121046 [CommandExec]:got command set keepstation.Speed 0.8 meter_per_second

20250630T121233 [keepstation:TransitToStation:Wpt1.Waypoint]:Navigating to waypoint: 36.797001,-121.847000

20250630T125713 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250630T125724 [BPC1]:BPC1A got IPBS message with 4 sticks (min is 7).

20250630T125732 [BPC1]:BPC1A got IPBS message with 4 sticks (min is 7).

20250630T125741 [BPC1]:BPC1A got IPBS message with 4 sticks (min is 7).

20250630T130700 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20250630T131609 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250630T131638 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20250630T131752 [BuoyancyServo]:getPosition uart error serial timeout

20250630T131752 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20250630T131752 [BuoyancyServo]:Communications Fault

20250630T131752 [CBIT]:Communications Fault in component: BuoyancyServo

20250630T132054 [BPC1]:Battery stick #1 (s/n: 0226) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250630T132054 [BPC1]:Battery stick #3 (s/n: 0268) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250630T132054 [BPC1]:Battery stick #4 (s/n: 01F1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250630T132054 [BPC1]:Battery stick #7 (s/n: 0265) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250630T132054 [BPC1]:Battery stick #25 (s/n: 01EB) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250630T132054 [BPC1]:Battery stick #33 (s/n: 01B6) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250630T132054 [BPC1]:Battery stick #35 (s/n: 01F9) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250630T132054 [BPC1]:Battery stick #37 (s/n: 023C) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250630T132054 [BPC1]:Battery stick #56 (s/n: 01FB) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250630T132054 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20250630T133850 [GFScanner]:Beginning ground fault scan

20250630T144331 [ThrusterHE]:getSpeed error serial timeout

20250630T144331 [ThrusterHE]:Thruster uart error: serial timeout

20250630T144331 [ThrusterHE]:Communications Fault

20250630T144331 [CBIT]:Communications Fault in component: ThrusterHE

20250630T144337 [ThrusterHE]:Zero Speed Commanded.

20250630T144527 [MissionManager]:Started mission Default

20250630T144644 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20250630T144941 [DataOverHttps]:Server acknowledged file Logs/20250630T073837/Courier0088.lzma, notLogs/20250630T073837/Express0089.lzma

20250630T145234 [CommandExec]:got command configSet BPC1.loadAtStartup 0 bool persist

20250630T145234 [CommandExec]:configSet BPC1.loadAtStartup requires a restart to take effect.

20250630T145234 [CommandExec]:got command restart application