galene Path

trajectory

20230517T193719 [CommandExec]:got command ! echo i > /dev/loadB4

20230517T193800 [CommandExec]:got command gfscan

20230517T193800 [CBIT]:Beginning ground fault scan

20230517T194052 [Default:CheckIn:E]:Default mission has been running for 7.206875 min

20230517T194155 [CommandExec]:got command gfscan

20230517T194155 [CBIT]:Beginning ground fault scan

20230517T194158 [CBIT]:Error reading 24V bus power status. Assuming off for scan purposes.

20230517T194638 [Default:CheckIn:E]:Default mission has been running for 12.979403 min

20230517T194930 [CommandExec]:got command run ./Missions/Maintenance/ballast_and_trim.tl

20230517T194930 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Maintenance/ballast_and_trim.tx

20230517T194932 [CommandExec]:Running ./Missions/Maintenance/ballast_and_trim.tl

20230517T194933 [MissionManager]:Started mission ballast_and_trim

20230517T201603 completed. Estimation time: 10.01 minutes.

20230517T201603 persisted config values to: 284.635244 cc buoyancy neutral and 14.174119 mm mass default

20230517T201837 [NAL9602]:Failed to initiate SBD session. Error code: 2

20230517T201920 [NAL9602]:Failed to initiate SBD session. Error code: 2

20230517T202108 [MissionManager]:Started mission Default

20230517T202239 [CommandExec]:got command gfscan

20230517T202239 [CBIT]:Beginning ground fault scan

20230517T202242 [CBIT]:Error reading 24V bus power status. Assuming off for scan purposes.

20230517T202650 [Default:CheckIn:E]:Default mission has been running for 5.709384 min

20230517T202920 [CommandExec]:got command run ./Missions/Maintenance/calibrate_sparton_compass.tl

20230517T202920 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Maintenance/calibrate_sparton_compass.tx

20230517T202923 [CommandExec]:Running ./Missions/Maintenance/calibrate_sparton_compass.tl

20230517T202923 [MissionManager]:Started mission calibrate_sparton_compass

20230517T202924 [calibrate_sparton_compass:L.AltitudeEnvelope]:Altitude Measurement is not Active.

20230517T212923 [AHRS_M2]:Acquired 10 calibration points.

20230517T212923 [MissionManager]:Started mission Default

20230517T212924 [AHRS_M2]:Magnetic calibration quality (0[best] to 10000) is 0.003412.

20230517T213035 [CommandExec]:got command schedule asap "configSet Express none CTD_Seabird.bin_median_sea_water_salinity persist;configSet Express none persist" 4vnvp 1 2.000000

20230517T213035 [CommandExec]:Scheduling command #1 of 2 with id=4vnvp

20230517T213035 [CommandExec]:Scheduled #1 (#1 of 2 with id='4vnvp'): "configSet Express none CTD_Seabird.bin_median_sea_water_salinity persist;configSet Express none persist", ASAP

20230517T213100 [CommandExec]:got command schedule asap "configSet Express none CTD_Seabird.bin_median_sea_water_temperature persist;configSet Express none persist" 4vnvp 2 2.000000

20230517T213100 [CommandExec]:Scheduling command #2 of 2 with id=4vnvp

20230517T213100 [CommandExec]:Scheduled #2 (#2 of 2 with id='4vnvp'): "configSet Express none CTD_Seabird.bin_median_sea_water_temperature persist;configSet Express none persist", ASAP

20230517T213105 [CommandExec]:got command configSet Express none CTD_Seabird.bin_median_sea_water_salinity persist

20230517T213105 [CommandExec]:got command configSet Express none persist

20230517T213110 [CommandExec]:got command configSet Express none CTD_Seabird.bin_median_sea_water_temperature persist

20230517T213110 [CommandExec]:got command configSet Express none persist

20230517T215004 [CommandExec]:got command load ./Missions/Transport/transit.tl

20230517T215004 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Transport/transit.tx

20230517T215004 [CommandExec]:Loaded ./Missions/Transport/transit.tl

20230517T215012 [CommandExec]:got command set transit.MissionTimeout 60 hour

20230517T215012 [CommandExec]:got command set transit.Latitude 36.712468 degree

20230517T215012 [CommandExec]:got command set transit.Longitude -122.186898 degree

20230517T215012 [CommandExec]:got command set transit.Speed 0.8 meter_per_second

20230517T215012 [CommandExec]:got command run

20230517T215012 [CommandExec]:Running

20230517T215012 [MissionManager]:Started mission transit

20230517T215014 [transit:Transit:Wpt1.Waypoint]:Navigating to waypoint: 36.712467,-122.186897

20230517T215014 [transit:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20230517T225842 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20230517T225935 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20230517T235826 [BuoyancyServo]:getPosition uart error serial timeout

20230517T235826 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20230517T235826 [BuoyancyServo]:Communications Fault

20230517T235826 [CBIT]:Communications Fault in component: BuoyancyServo

20230518T000257 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20230518T010336 [NAL9602]:Failed to initiate SBD session. Error code: 2

20230518T011012 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20230518T022253 [CBIT]:Error reading 24V bus power status. Assuming off for scan purposes.

20230518T032335 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20230518T043846 [ThrusterHE]:Could not get status:serial timeout

20230518T045621 [RudderServo]:getPosition uart error serial timeout

20230518T045621 [RudderServo]:Rudder uart error - getPosition..serial timeout

20230518T045621 [RudderServo]:Communications Fault

20230518T045621 [CBIT]:Communications Fault in component: RudderServo

20230518T050904 [ThrusterHE]:Could not get status:serial timeout

20230518T065157 [BPC1]:Battery stick #49 (s/n: 0283) reported OVER_TEMP_ALARM. Status code: 0x1717.

20230518T082137 [ElevatorServo]:getPosition uart error serial timeout

20230518T082137 [ElevatorServo]:Elevator uart error - getPosition.serial timeout

20230518T082137 [ElevatorServo]:Communications Fault

20230518T082137 [CBIT]:Communications Fault in component: ElevatorServo

20230518T082258 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20230518T101918 [MissionManager]:Started mission Default

20230518T104114 [CommandExec]:got command load ./Missions/Transport/keepstation.tl

20230518T104114 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Transport/keepstation.tx

20230518T104114 [CommandExec]:Loaded ./Missions/Transport/keepstation.tl

20230518T104124 [CommandExec]:got command set keepstation.MissionTimeout 5 hour

20230518T104124 [CommandExec]:got command set keepstation.NeedCommsTime 60 minute

20230518T104124 [CommandExec]:got command set keepstation.Latitude 36.712468 degree

20230518T104124 [CommandExec]:got command set keepstation.Longitude -122.186898 degree

20230518T104124 [CommandExec]:got command run

20230518T104124 [CommandExec]:Running

20230518T104124 [MissionManager]:Started mission keepstation

20230518T104125 [keepstation:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20230518T104332 [keepstation:TransitToStation:Wpt1.Waypoint]:Navigating to waypoint: 36.712467,-122.186897

20230518T104811 [keepstation:TransitToStation:Wpt1.Waypoint]:Reached waypoint: 36.712467,-122.186897

20230518T154247 [CommandExec]:got command load ./Missions/Transport/keepstation.tl

20230518T154247 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Transport/keepstation.tx

20230518T154247 [CommandExec]:Loaded ./Missions/Transport/keepstation.tl

20230518T154257 [CommandExec]:got command set keepstation.MissionTimeout 20 hour

20230518T154257 [CommandExec]:got command set keepstation.NeedCommsTime 60 minute

20230518T154257 [CommandExec]:got command set keepstation.Latitude 36.7305 degree

20230518T154257 [CommandExec]:got command set keepstation.Longitude -122.1869 degree

20230518T154257 [CommandExec]:got command run

20230518T154257 [CommandExec]:Running

20230518T154257 [MissionManager]:Started mission keepstation

20230518T154259 [keepstation:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20230518T154539 [keepstation:TransitToStation:Wpt1.Waypoint]:Navigating to waypoint: 36.730499,-122.186897

20230518T162100 [keepstation:TransitToStation:Wpt1.Waypoint]:Reached waypoint: 36.730499,-122.186897

20230518T162310 [CommandExec]:got command schedule asap "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 7 h;set sci2_flat_and_level.Depth 100 m;set sci2_flat_and_level.Repeat 12 count;set sci2_flat_and_level.Lat1 36.7215 degree" 4x6lw 1 2.000000

20230518T162310 [CommandExec]:Scheduling command #1 of 2 with id=4x6lw

20230518T162310 [CommandExec]:Scheduled #3 (#1 of 2 with id='4x6lw'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 7 h;set sci2_flat_and_level.Depth 100 m;set sci2_flat_and_level.Repeat 12 count;set sci2_flat_and_level.Lat1 36.7215 degree", ASAP

20230518T162402 [CommandExec]:got command schedule asap "set sci2_flat_and_level.Lon1 -122.1869 degree;set sci2_flat_and_level.Lat2 36.7305 degree;set sci2_flat_and_level.Lon2 -122.1869 degree;set sci2_flat_and_level.Speed .8 m/s;set sci2_flat_and_level.MaxDepth 110 m;run" 4x6lw 2 2.000000

20230518T162402 [CommandExec]:Scheduling command #2 of 2 with id=4x6lw

20230518T162402 [CommandExec]:Scheduled #4 (#2 of 2 with id='4x6lw'): "set sci2_flat_and_level.Lon1 -122.1869 degree;set sci2_flat_and_level.Lat2 36.7305 degree;set sci2_flat_and_level.Lon2 -122.1869 degree;set sci2_flat_and_level.Speed .8 m/s;set sci2_flat_and_level.MaxDepth 110 m;run", ASAP

20230518T162402 [CommandExec]:got command load ./Missions/Science/sci2_flat_and_level.xml

20230518T162405 [CommandExec]:Loaded ./Missions/Science/sci2_flat_and_level.xml

20230518T162419 [CommandExec]:got command set sci2_flat_and_level.MissionTimeout 7 hour

20230518T162419 [CommandExec]:got command set sci2_flat_and_level.Depth 100 meter

20230518T162419 [CommandExec]:got command set sci2_flat_and_level.Repeat 12 count

20230518T162419 [CommandExec]:got command set sci2_flat_and_level.Lat1 36.7215 degree

20230518T162433 [CommandExec]:got command set sci2_flat_and_level.Lon1 -122.1869 degree

20230518T162433 [CommandExec]:got command set sci2_flat_and_level.Lat2 36.7305 degree

20230518T162433 [CommandExec]:got command set sci2_flat_and_level.Lon2 -122.1869 degree

20230518T162433 [CommandExec]:got command set sci2_flat_and_level.Speed .8 meter_per_second

20230518T162433 [CommandExec]:got command set sci2_flat_and_level.MaxDepth 110 meter

20230518T162433 [MissionManager]:Started mission sci2_flat_and_level

20230518T162436 [CTD_Seabird]:Salinity reading out of range: 27.087870 psu

20230518T162837 [sci2_flat_and_level:Lap:Wpt1:A.Waypoint]:Navigating to waypoint: 36.721500,-122.186897

20230518T165551 [sci2_flat_and_level:Lap:Wpt2:A.Waypoint]:Navigating to waypoint: 36.730499,-122.186897

20230518T172123 [sci2_flat_and_level:Lap:Wpt1:A.Waypoint]:Navigating to waypoint: 36.721500,-122.186897

20230518T173307 [CTD_Seabird]:Failed to parse device response: .07#

20230518T173517 [CommandExec]:got command configSet Express none _.ayeris_particle_slope persist

20230518T173534 [CommandExec]:got command configSet Express none _.ayeris_particle_shape persist

20230518T173548 [CommandExec]:got command schedule asap "load Engineering/sci2_flat_and_level_backseat.xml;set sci2_flat_and_level_backseat.MissionTimeout 1 h;set sci2_flat_and_level_backseat.Depth 100 m;set sci2_flat_and_level_backseat.Lat1 36.7305 degree" 4x9iy 1 3.000000

20230518T173548 [CommandExec]:Scheduling command #1 of 3 with id=4x9iy

20230518T173548 [CommandExec]:Scheduled #5 (#1 of 3 with id='4x9iy'): "load Engineering/sci2_flat_and_level_backseat.xml;set sci2_flat_and_level_backseat.MissionTimeout 1 h;set sci2_flat_and_level_backseat.Depth 100 m;set sci2_flat_and_level_backseat.Lat1 36.7305 degree", ASAP

20230518T173610 [CommandExec]:got command schedule asap "set sci2_flat_and_level_backseat.Lon1 -122.1869 degree;set sci2_flat_and_level_backseat.Lat2 36.7215 degree;set sci2_flat_and_level_backseat.Lon2 -122.1869 degree;set sci2_flat_and_level_backseat.Lat3 36.7305 degree" 4x9iy 2 3.000000

20230518T173610 [CommandExec]:Scheduling command #2 of 3 with id=4x9iy

20230518T173610 [CommandExec]:Scheduled #6 (#2 of 3 with id='4x9iy'): "set sci2_flat_and_level_backseat.Lon1 -122.1869 degree;set sci2_flat_and_level_backseat.Lat2 36.7215 degree;set sci2_flat_and_level_backseat.Lon2 -122.1869 degree;set sci2_flat_and_level_backseat.Lat3 36.7305 degree", ASAP

20230518T173620 [CommandExec]:got command schedule asap "set sci2_flat_and_level_backseat.Lon3 -122.1869 degree;set sci2_flat_and_level_backseat.MaxDepth 110 m;run" 4x9iy 3 3.000000

20230518T173620 [CommandExec]:Scheduling command #3 of 3 with id=4x9iy

20230518T173620 [CommandExec]:Scheduled #7 (#3 of 3 with id='4x9iy'): "set sci2_flat_and_level_backseat.Lon3 -122.1869 degree;set sci2_flat_and_level_backseat.MaxDepth 110 m;run", ASAP

20230518T173620 [CommandExec]:got command load ./Missions/Engineering/sci2_flat_and_level_backseat.xml

20230518T173625 [CommandExec]:Loaded ./Missions/Engineering/sci2_flat_and_level_backseat.xml

20230518T173638 [CommandExec]:got command set sci2_flat_and_level_backseat.MissionTimeout 1 hour

20230518T173638 [CommandExec]:got command set sci2_flat_and_level_backseat.Depth 100 meter

20230518T173638 [CommandExec]:got command set sci2_flat_and_level_backseat.Lat1 36.7305 degree

20230518T173653 [CommandExec]:got command set sci2_flat_and_level_backseat.Lon1 -122.1869 degree

20230518T173653 [CommandExec]:got command set sci2_flat_and_level_backseat.Lat2 36.7215 degree

20230518T173653 [CommandExec]:got command set sci2_flat_and_level_backseat.Lon2 -122.1869 degree

20230518T173653 [CommandExec]:got command set sci2_flat_and_level_backseat.Lat3 36.7305 degree

20230518T173702 [CommandExec]:got command set sci2_flat_and_level_backseat.Lon3 -122.1869 degree

20230518T173702 [CommandExec]:got command set sci2_flat_and_level_backseat.MaxDepth 110 meter

20230518T173702 [MissionManager]:Started mission sci2_flat_and_level_backseat

20230518T173705 [CTD_Seabird]:Salinity reading out of range: 57.043964 psu

20230518T173812 [BackseatComponent]:calanus: Running AyeRIS backseat app. Logging to: 20230518T173807

20230518T173841 [Depth_Keller]:Failed to copy Depth_Keller.enableBroadcast's data value to LCM message.

20230518T175019 [sci2_flat_and_level_backseat:Lap:Wpt1:A.Waypoint]:Reached waypoint: 36.730499,-122.186897

20230518T180742 [sci2_flat_and_level_backseat:Lap:Wpt2:A.Waypoint]:Reached waypoint: 36.721500,-122.186897

20230518T181409 [CTD_Seabird]:Failed to parse device response: 100.00,6#

20230518T182526 [sci2_flat_and_level_backseat:Lap:Wpt3:A.Waypoint]:Reached waypoint: 36.730499,-122.186897

20230518T184522 [CommandExec]:got command schedule asap "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 20.25 h;set sci2_flat_and_level.Depth 100 m;set sci2_flat_and_level.Repeat 40 count;set sci2_flat_and_level.Lat1 36.7215 degree" 4xdc7 1 2.000000

20230518T184522 [CommandExec]:Scheduling command #1 of 2 with id=4xdc7

20230518T184522 [CommandExec]:Scheduled #8 (#1 of 2 with id='4xdc7'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 20.25 h;set sci2_flat_and_level.Depth 100 m;set sci2_flat_and_level.Repeat 40 count;set sci2_flat_and_level.Lat1 36.7215 degree", ASAP

20230518T184622 [CommandExec]:got command schedule asap "set sci2_flat_and_level.Lon1 -122.1869 degree;set sci2_flat_and_level.Lat2 36.7305 degree;set sci2_flat_and_level.Lon2 -122.1869 degree;set sci2_flat_and_level.Speed .8 m/s;set sci2_flat_and_level.MaxDepth 110 m;run" 4xdc7 2 2.000000

20230518T184622 [CommandExec]:Scheduling command #2 of 2 with id=4xdc7

20230518T184622 [CommandExec]:Scheduled #9 (#2 of 2 with id='4xdc7'): "set sci2_flat_and_level.Lon1 -122.1869 degree;set sci2_flat_and_level.Lat2 36.7305 degree;set sci2_flat_and_level.Lon2 -122.1869 degree;set sci2_flat_and_level.Speed .8 m/s;set sci2_flat_and_level.MaxDepth 110 m;run", ASAP

20230518T184622 [CommandExec]:got command load ./Missions/Science/sci2_flat_and_level.xml

20230518T184625 [CommandExec]:Loaded ./Missions/Science/sci2_flat_and_level.xml

20230518T184638 [CommandExec]:got command set sci2_flat_and_level.MissionTimeout 20.25 hour

20230518T184638 [CommandExec]:got command set sci2_flat_and_level.Depth 100 meter

20230518T184638 [CommandExec]:got command set sci2_flat_and_level.Repeat 40 count

20230518T184638 [CommandExec]:got command set sci2_flat_and_level.Lat1 36.7215 degree

20230518T184653 [CommandExec]:got command set sci2_flat_and_level.Lon1 -122.1869 degree

20230518T184653 [CommandExec]:got command set sci2_flat_and_level.Speed .8 meter_per_second

20230518T184653 [CommandExec]:got command set sci2_flat_and_level.MaxDepth 110 meter

20230518T184653 [MissionManager]:Started mission sci2_flat_and_level

20230518T184656 [CTD_Seabird]:Pressure reading out of range: -147.210007 decibar

20230518T192540 [CTD_Seabird]:Failed to parse device response: .52#

20230518T221338 [CTD_Seabird]:Salinity reading out of range: 21.772495 psu

20230518T223401 [CTD_Seabird]:Failed to parse device response: 98.98,9.4504,#

20230519T003037 [CTD_Seabird]:Failed to parse device response: .00#

20230519T011258 [CTD_Seabird]:Failed to parse device response: 98.38,6#

20230519T011357 [CTD_Seabird]:Failed to parse device response: 8,3.65654,1998.19#

20230519T013925 [NAL9602]:Inadequate Iridium signal strength reported: 0

20230519T021229 [CTD_Seabird]:Failed to parse device response: 3,3.62644,1929.41#

20230519T035952 [CommandExec]:got command stop

20230519T035952 [CommandExec]:Scheduling is paused

20230519T041028 [CommandExec]:got command ! echo i > /dev/loadC3

20230519T041055 [NAL9602]:Inadequate Iridium signal strength reported: 0

20230519T041103 [NAL9602]:Inadequate Iridium signal strength reported: 0

20230519T043452 [CommandExec]:got command schedule asap "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 20.25 h;set sci2_flat_and_level.Depth 100 m;set sci2_flat_and_level.Repeat 40 count;set sci2_flat_and_level.Lat1 36.7215 degree" 4y4bc 1 2.000000

20230519T043452 [CommandExec]:Scheduling command #1 of 2 with id=4y4bc

20230519T043452 [CommandExec]:Scheduled #10 (#1 of 2 with id='4y4bc'): "load Science/sci2_flat_and_level.xml;set sci2_flat_and_level.MissionTimeout 20.25 h;set sci2_flat_and_level.Depth 100 m;set sci2_flat_and_level.Repeat 40 count;set sci2_flat_and_level.Lat1 36.7215 degree", ASAP

20230519T043514 [CommandExec]:got command schedule asap "set sci2_flat_and_level.Lon1 -122.1869 degree;set sci2_flat_and_level.Lat2 36.7305 degree;set sci2_flat_and_level.Lon2 -122.1869 degree;set sci2_flat_and_level.Speed .8 m/s;set sci2_flat_and_level.MaxDepth 110 m;run" 4y4bc 2 2.000000

20230519T043514 [CommandExec]:Scheduling command #2 of 2 with id=4y4bc

20230519T043514 [CommandExec]:Scheduled #11 (#2 of 2 with id='4y4bc'): "set sci2_flat_and_level.Lon1 -122.1869 degree;set sci2_flat_and_level.Lat2 36.7305 degree;set sci2_flat_and_level.Lon2 -122.1869 degree;set sci2_flat_and_level.Speed .8 m/s;set sci2_flat_and_level.MaxDepth 110 m;run", ASAP

20230519T043515 [CommandExec]:got command load ./Missions/Science/sci2_flat_and_level.xml

20230519T043517 [CommandExec]:Loaded ./Missions/Science/sci2_flat_and_level.xml

20230519T043530 [CommandExec]:got command set sci2_flat_and_level.MissionTimeout 20.25 hour

20230519T043530 [CommandExec]:got command set sci2_flat_and_level.Depth 100 meter

20230519T043530 [CommandExec]:got command set sci2_flat_and_level.Repeat 40 count

20230519T043546 [CommandExec]:got command set sci2_flat_and_level.Speed .8 meter_per_second

20230519T043546 [CommandExec]:got command set sci2_flat_and_level.MaxDepth 110 meter

20230519T043547 [MissionManager]:Started mission sci2_flat_and_level

20230519T043549 [CTD_Seabird]:Pressure reading out of range: -56.169998 decibar

20230519T073514 [CTD_Seabird]:Failed to parse device response: 8,3.62613,1940.47#

20230519T075934 [ThrusterHE]:Could not get status:serial timeout

20230519T091712 [CTD_Seabird]:Failed to parse device response: 03,2215.10#

20230519T141333 [CTD_Seabird]:Failed to parse device response: 40,1931.69#

20230519T155600 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20230519T155636 [NAL9602]:Queried for signal strength and failed to receive proper response.

20230519T160232 [CommandExec]:got command configSet CBIT.gfScanTimeout 1.0 hour persist

20230519T160820 [CommandExec]:got command schedule asap "load Engineering/sci2_flat_and_level_backseat.xml;set sci2_flat_and_level_backseat.MissionTimeout 8 h;set sci2_flat_and_level_backseat.Depth 100 m;set sci2_flat_and_level_backseat.Repeat 12 count" 4yxpy 1 3.000000

20230519T160820 [CommandExec]:Scheduling command #1 of 3 with id=4yxpy

20230519T160820 [CommandExec]:Scheduled #12 (#1 of 3 with id='4yxpy'): "load Engineering/sci2_flat_and_level_backseat.xml;set sci2_flat_and_level_backseat.MissionTimeout 8 h;set sci2_flat_and_level_backseat.Depth 100 m;set sci2_flat_and_level_backseat.Repeat 12 count", ASAP

20230519T160935 [CommandExec]:got command schedule asap "set sci2_flat_and_level_backseat.Lat1 36.7305 degree;set sci2_flat_and_level_backseat.Lon1 -122.1869 degree;set sci2_flat_and_level_backseat.Lat2 36.7215 degree;set sci2_flat_and_level_backseat.Lon2 -122.1869 degree" 4yxpy 2 3.000000

20230519T160935 [CommandExec]:Scheduling command #2 of 3 with id=4yxpy

20230519T160935 [CommandExec]:Scheduled #13 (#2 of 3 with id='4yxpy'): "set sci2_flat_and_level_backseat.Lat1 36.7305 degree;set sci2_flat_and_level_backseat.Lon1 -122.1869 degree;set sci2_flat_and_level_backseat.Lat2 36.7215 degree;set sci2_flat_and_level_backseat.Lon2 -122.1869 degree", ASAP

20230519T161144 [CommandExec]:got command schedule asap "set sci2_flat_and_level_backseat.Lat3 36.7305 degree;set sci2_flat_and_level_backseat.Lon3 -122.1869 degree;set sci2_flat_and_level_backseat.Speed 0.8 m/s;set sci2_flat_and_level_backseat.MaxDepth 110 m;run" 4yxpy 3 3.000000

20230519T161144 [CommandExec]:Scheduling command #3 of 3 with id=4yxpy

20230519T161144 [CommandExec]:Scheduled #14 (#3 of 3 with id='4yxpy'): "set sci2_flat_and_level_backseat.Lat3 36.7305 degree;set sci2_flat_and_level_backseat.Lon3 -122.1869 degree;set sci2_flat_and_level_backseat.Speed 0.8 m/s;set sci2_flat_and_level_backseat.MaxDepth 110 m;run", ASAP

20230519T161144 [CommandExec]:got command load ./Missions/Engineering/sci2_flat_and_level_backseat.xml

20230519T161147 [CommandExec]:Loaded ./Missions/Engineering/sci2_flat_and_level_backseat.xml

20230519T161159 [CommandExec]:got command set sci2_flat_and_level_backseat.MissionTimeout 8 hour

20230519T161159 [CommandExec]:got command set sci2_flat_and_level_backseat.Depth 100 meter

20230519T161159 [CommandExec]:got command set sci2_flat_and_level_backseat.Repeat 12 count

20230519T161232 [CommandExec]:got command set sci2_flat_and_level_backseat.Speed 0.8 meter_per_second

20230519T161232 [CommandExec]:got command set sci2_flat_and_level_backseat.MaxDepth 110 meter

20230519T161233 [MissionManager]:Started mission sci2_flat_and_level_backseat

20230519T161235 [CTD_Seabird]:Pressure reading out of range: -10.310000 decibar

20230519T161426 [BackseatComponent]:calanus: Running AyeRIS backseat app. Logging to: 20230519T161423

20230519T161457 [Depth_Keller]:Failed to copy Depth_Keller.enableBroadcast's data value to LCM message.

20230519T180401 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20230519T191447 [CTD_Seabird]:Failed to parse device response: 1#

20230519T201035 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20230519T201115 [NAL9602]:Queried for signal strength and failed to receive proper response.

20230519T201125 [CTD_Seabird]:Failed to parse device response: 0.19.56#

20230519T224956 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20230519T225028 [NAL9602]:Queried for signal strength and failed to receive proper response.

20230519T225112 [CommandExec]:got command schedule asap "configSet CTD_Seabird.loadAtStartup 0 bool persist; configSet DAT.loadAtStartup 0 bool persist; " 4zhs5 1 2.000000

20230519T225112 [CommandExec]:Scheduling command #1 of 2 with id=4zhs5

20230519T225112 [CommandExec]:Scheduled #15 (#1 of 2 with id='4zhs5'): "configSet CTD_Seabird.loadAtStartup 0 bool persist; configSet DAT.loadAtStartup 0 bool persist; ", ASAP

20230519T225125 [CommandExec]:got command schedule asap "Sonardyne_Nano.loadAtStartup 0 bool persist; restart app" 4zhs5 2 2.000000

20230519T225125 [CommandExec]:Scheduling command #2 of 2 with id=4zhs5

20230519T225125 [CommandExec]:Scheduled #16 (#2 of 2 with id='4zhs5'): "Sonardyne_Nano.loadAtStartup 0 bool persist; restart app", ASAP

20230519T225127 [CommandExec]:got command configSet CTD_Seabird.loadAtStartup 0 bool persist

20230519T225127 [CommandExec]:configSet CTD_Seabird.loadAtStartup requires a restart to take effect.

20230519T225127 [CommandExec]:got command configSet DAT.loadAtStartup 0 bool persist

20230519T225127 [CommandExec]:configSet DAT.loadAtStartup requires a restart to take effect.

20230519T225127 [CommandExec]:got command

20230519T225127 [CommandExec]:Syntax error. Try: help

20230519T225132 [CommandExec]:got command send

20230519T225132 [CommandExec]:Incomplete syntax. Try: help send

20230520T002113 [CommandExec]:got command configSet Sonardyne_Nano.loadAtStartup 0 bool persist

20230520T002113 [CommandExec]:configSet Sonardyne_Nano.loadAtStartup requires a restart to take effect.

20230520T002113 [CommandExec]:got command restart application