galene Path

trajectory

20230414T191923 [CommandExec]:got command restart logs

20230414T192007 [CommandExec]:got command run ./Missions/Maintenance/ballast_and_trim.tl

20230414T192007 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Maintenance/ballast_and_trim.tx

20230414T192010 [CommandExec]:Running ./Missions/Maintenance/ballast_and_trim.tl

20230414T192010 [MissionManager]:Started mission ballast_and_trim

20230414T192511 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20230414T192517 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20230414T194655 completed. Estimation time: 10.01 minutes.

20230414T194655 persisted config values to: 344.974751 cc buoyancy neutral and 12.197443 mm mass default

20230414T195104 [MissionManager]:Started mission Default

20230414T195704 [Default:CheckIn:E]:Default mission has been running for 5.994247 min

20230414T200119 [CommandExec]:got command ! echo 1 > /dev/loadB4

20230414T200203 [CommandExec]:got command gfscan

20230414T200203 [CBIT]:Beginning ground fault scan

20230414T200206 [CBIT]:Error reading 24V bus power status. Assuming off for scan purposes.

20230414T200234 [Default:CheckIn:E]:Default mission has been running for 11.489445 min

20230414T200514 [CommandExec]:got command ! echo i > /dev/loadB4

20230414T200633 [CommandExec]:got command gfscan

20230414T200633 [CBIT]:Beginning ground fault scan

20230414T200636 [CBIT]:Error reading 24V bus power status. Assuming off for scan purposes.

20230414T200814 [Default:CheckIn:E]:Default mission has been running for 17.167440 min

20230414T200906 [NAL9602]:Failed to initiate SBD session. Error code: 2

20230414T201947 [CommandExec]:got command load ./Missions/Transport/keepstation.tl

20230414T201947 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Transport/keepstation.tx

20230414T201947 [CommandExec]:Loaded ./Missions/Transport/keepstation.tl

20230414T201950 [CommandExec]:got command set keepstation.NeedCommsTime 20 minute

20230414T201950 [CommandExec]:got command run

20230414T201950 [CommandExec]:Running

20230414T201950 [MissionManager]:Started mission keepstation

20230414T201951 [keepstation:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20230414T202020 [CommandExec]:got command stop

20230414T202020 [CommandExec]:Scheduling is paused

20230414T202021 [MissionManager]:Started mission Default

20230414T202733 [NAL9602]:Failed to initiate SBD session. Error code: 2

20230414T203122 [CommandExec]:got command schedule clear

20230414T203122 [CommandExec]:Cleared 0 scheduled commands.

20230414T203122 [CommandExec]:got command schedule resume

20230414T203122 [CommandExec]:Scheduling is resumed

20230414T203130 [CommandExec]:got command schedule asap "load Science/sci2.tl;set sci2.MissionTimeout 15 h;set sci2.NeedCommsTime 30 min;set sci2.Lat1 36.725 degree;set sci2.Lon1 -121.85 degree;set sci2.Lat2 36.58948 degree;set sci2.Lon2 -122.1403 degree;set sci2.Speed .8 m/s" 36jo9 1 2.000000

20230414T203130 [CommandExec]:Scheduling command #1 of 2 with id=36jo9

20230414T203130 [CommandExec]:Scheduled #1 (#1 of 2 with id='36jo9'): "load Science/sci2.tl;set sci2.MissionTimeout 15 h;set sci2.NeedCommsTime 30 min;set sci2.Lat1 36.725 degree;set sci2.Lon1 -121.85 degree;set sci2.Lat2 36.58948 degree;set sci2.Lon2 -122.1403 degree;set sci2.Speed .8 m/s", ASAP

20230414T203141 [CommandExec]:got command schedule asap "set sci2.YoYoMaxDepth 30 m;set sci2.MaxDepth 35 m;run" 36jo9 2 2.000000

20230414T203141 [CommandExec]:Scheduling command #2 of 2 with id=36jo9

20230414T203141 [CommandExec]:Scheduled #2 (#2 of 2 with id='36jo9'): "set sci2.YoYoMaxDepth 30 m;set sci2.MaxDepth 35 m;run", ASAP

20230414T203141 [CommandExec]:got command load ./Missions/Science/sci2.tl

20230414T203141 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Science/sci2.tx

20230414T203145 [CommandExec]:Loaded ./Missions/Science/sci2.tl

20230414T203153 [CommandExec]:got command set sci2.MissionTimeout 15 hour

20230414T203153 [CommandExec]:got command set sci2.NeedCommsTime 30 minute

20230414T203153 [CommandExec]:got command set sci2.Lat1 36.725 degree

20230414T203153 [CommandExec]:got command set sci2.Lon1 -121.85 degree

20230414T203153 [CommandExec]:got command set sci2.Lat2 36.58948 degree

20230414T203153 [CommandExec]:got command set sci2.Lon2 -122.1403 degree

20230414T203153 [CommandExec]:got command set sci2.Speed .8 meter_per_second

20230414T203156 [CommandExec]:got command set sci2.YoYoMaxDepth 30 meter

20230414T203156 [CommandExec]:got command set sci2.MaxDepth 35 meter

20230414T203156 [CommandExec]:got command run

20230414T203156 [CommandExec]:Running

20230414T203156 [MissionManager]:Started mission sci2

20230414T203158 [sci2:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20230414T203158 [sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20230414T203242 [ElevatorServo]:getPosition uart error serial timeout

20230414T203242 [ElevatorServo]:Elevator uart error - getPosition.serial timeout

20230414T203242 [ElevatorServo]:Communications Fault

20230414T203242 [CBIT]:Communications Fault in component: ElevatorServo

20230414T203252 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20230414T210424 [NAL9602]:Failed to initiate SBD session. Error code: 2

20230414T213649 [CTD_Seabird]:Failed to parse device response: 3,3.76970,3747.47#

20230414T214004 [CTD_Seabird]:Salinity reading out of range: 26.731060 psu

20230414T214343 [DataOverHttps]:Server acknowledged file Logs/20230414T191923/Courier0057.lzma, notLogs/20230414T191923/Express0058.lzma

20230414T221942 [RudderServo]:getPosition uart error serial timeout

20230414T221942 [RudderServo]:Rudder uart error - getPosition..serial timeout

20230414T221942 [RudderServo]:Communications Fault

20230414T221942 [CBIT]:Communications Fault in component: RudderServo

20230415T005911 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20230415T010257 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20230415T012012 [CTD_Seabird]:Failed to parse device response: 0.92.87#

20230415T013822 [ThrusterHE]:Could not get status:serial timeout

20230415T020644 [CBIT]:Beginning ground fault scan

20230415T020647 [CBIT]:Error reading 24V bus power status. Assuming off for scan purposes.

20230415T034943 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20230415T042245 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20230415T042411 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20230415T054242 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20230415T061655 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20230415T062143 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20230415T063046 [CTD_Seabird]:Failed to parse device response: #

20230415T065621 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20230415T065721 [CommandExec]:got command stop

20230415T065721 [CommandExec]:Scheduling is paused

20230415T065722 [MissionManager]:Started mission Default

20230415T065846 [CommandExec]:got command schedule asap "set sci2.YoYoMaxDepth 50 m;set sci2.MaxDepth 55 m;run" 377u0 2 2.000000

20230415T065846 [CommandExec]:Scheduling command #2 of 2 with id=377u0

20230415T065846 [CommandExec]:Scheduled #3 (#2 of 2 with id='377u0'): "set sci2.YoYoMaxDepth 50 m;set sci2.MaxDepth 55 m;run", ASAP

20230415T070555 [CommandExec]:got command schedule asap "load Science/sci2.tl;set sci2.MissionTimeout 18 h;set sci2.NeedCommsTime 60 min;set sci2.Lat1 36.58948 degree;set sci2.Lon1 -122.1403 degree;set sci2.Lat2 36.718 degree;set sci2.Lon2 -121.865 degree;set sci2.Speed .8 m/s" 377u0 1 2.000000

20230415T070555 [CommandExec]:Scheduling command #1 of 2 with id=377u0

20230415T070555 [CommandExec]:Scheduled #3 (#2 of 2 with id='377u0'): "set sci2.YoYoMaxDepth 50 m;set sci2.MaxDepth 55 m;run", ASAP

20230415T070555 [CommandExec]:got command load ./Missions/Science/sci2.tl

20230415T070555 [MissionManager]:Loading Compiled TethysL script from file ./Missions/Science/sci2.tx

20230415T070557 [CommandExec]:Loaded ./Missions/Science/sci2.tl

20230415T070605 [CommandExec]:got command set sci2.MissionTimeout 18 hour

20230415T070605 [CommandExec]:got command set sci2.NeedCommsTime 60 minute

20230415T070605 [CommandExec]:got command set sci2.Lat1 36.58948 degree

20230415T070605 [CommandExec]:got command set sci2.Lon1 -122.1403 degree

20230415T070605 [CommandExec]:got command set sci2.Speed .8 meter_per_second

20230415T070608 [CommandExec]:got command set sci2.YoYoMaxDepth 50 meter

20230415T070608 [CommandExec]:got command set sci2.MaxDepth 55 meter

20230415T070608 [CommandExec]:got command run

20230415T070608 [CommandExec]:Running

20230415T070608 [MissionManager]:Started mission sci2

20230415T070609 [sci2:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20230415T070609 [sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20230415T074435 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20230415T080959 [CTD_Seabird]:Failed to parse device response: 63,2988.72#

20230415T082502 [ThrusterHE]:Could not get status:serial timeout

20230415T103127 [CTD_Seabird]:Failed to parse device response: 0,3.67346,2367.26#

20230415T105652 [ElevatorServo]:getPosition uart error serial timeout

20230415T105652 [ElevatorServo]:Elevator uart error - getPosition.serial timeout

20230415T105652 [ElevatorServo]:Communications Fault

20230415T105652 [CBIT]:Communications Fault in component: ElevatorServo

20230415T115224 [ThrusterHE]:Could not get status:serial timeout

20230415T144640 [CTD_Seabird]:Salinity reading out of range: 22.012201 psu

20230415T153742 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20230415T155512 [CTD_Seabird]:Salinity reading out of range: 22.706356 psu