galene Path

trajectory

20211109T222659 [CommandExec]:got command restart logs

20211109T222858 [CommandExec]:got command get DropWeight.loadAtStartup

20211109T222858 [CommandExec]:DropWeight.loadAtStartup 1 bool

20211109T222939 [CommandExec]:got command get DropWeight.simulateHardware

20211109T222939 [CommandExec]:DropWeight.simulateHardware 0 bool

20211109T222959 [Default:CheckIn:E]:Default mission has been running for 5.691411 min

20211109T223209 [CommandExec]:got command load ./Missions/Maintenance/calibrate_sparton_compass.xml

20211109T223212 [CommandExec]:Loaded ./Missions/Maintenance/calibrate_sparton_compass.xml

20211109T223222 [CommandExec]:got command set SpartonCompassCal.YoYoMaxDepth 25.000000 meter

20211109T223222 [CommandExec]:got command set SpartonCompassCal.RudderAngle 9.000000 degree

20211109T223222 [CommandExec]:got command set SpartonCompassCal.MaxDepth 35.000000 meter

20211109T223222 [CommandExec]:got command run

20211109T223222 [CommandExec]:Running

20211109T223222 [MissionManager]:Started mission SpartonCompassCal

20211109T223224 [SpartonCompassCal:L.AltitudeEnvelope]:Altitude Measurement is not Active.

20211109T223224 [CTD_Seabird]:Pressure reading out of range: -10.980000 decibar

20211109T223404 [NAL9602]:Failed to initiate SBD session. Error code: 2

20211109T223833 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20211109T230730 [CTD_Seabird]:Failed to parse device response: 22.79,11.9839,8#

20211109T233223 [AHRS_M2]:Acquired 10 calibration points.

20211109T233223 [MissionManager]:Started mission Default

20211109T233223 [WetLabsBB2FL]:LCB fault: Software Overcurrent.

20211109T233223 [WetLabsBB2FL]:Hardware Fault

20211109T233223 [AHRS_M2]:Magnetic calibration quality (0[best] to 10000) is 0.000207.

20211109T233224 [CBIT]:Hardware Fault in component: WetLabsBB2FL

20211109T233349 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20211109T233446 [NAL9602]:Failed to initiate SBD session. Error code: 2

20211109T234107 [Default:CheckIn:E]:Default mission has been running for 8.741640 min

20211109T234638 [Default:CheckIn:E]:Default mission has been running for 14.243528 min

20211109T234721 [CommandExec]:got command load ./Missions/Maintenance/ballast_and_trim.xml

20211109T234724 [CommandExec]:Loaded ./Missions/Maintenance/ballast_and_trim.xml

20211109T234735 [CommandExec]:got command set ballast_and_trim.MissionTimeout 60.000000 minute

20211109T234735 [CommandExec]:got command set ballast_and_trim.Depth1 25.000000 meter

20211109T234735 [CommandExec]:got command set ballast_and_trim.MaxDepth 35.000000 meter

20211109T234735 [CommandExec]:got command set ballast_and_trim.MinOffshore 1.000000 kilometer

20211109T234735 [CommandExec]:got command run

20211109T234735 [CommandExec]:Running

20211109T234735 [MissionManager]:Started mission ballast_and_trim

20211109T234737 [CTD_Seabird]:Pressure reading out of range: -10.980000 decibar

20211109T234738 [CTD_Seabird]:Salinity reading out of range: 60.594166 psu

20211110T001345 completed. Estimation time: 10.01 minutes.

20211110T001345 persisted config values to: 80.130883 cc buoyancy neutral and -4.425218 mm mass default

20211110T001647 [NAL9602]:Failed to initiate SBD session. Error code: 2

20211110T001822 [NAL9602]:Inadequate Iridium signal strength reported: 0

20211110T001909 [MissionManager]:Started mission Default

20211110T010933 [CommandExec]:got command schedule asap "load Engineering/profile_station_backseat.xml;set profile_station_backseat.MissionTimeout 2 h;set profile_station_backseat.NeedCommsTime 45 min;set profile_station_backseat.Lat 36.797 degree" 240jm 1 2.000000

20211110T010933 [CommandExec]:Scheduling command #1 of 2 with id=240jm

20211110T010933 [CommandExec]:Scheduled #1 (#1 of 2 with id='240jm'): "load Engineering/profile_station_backseat.xml;set profile_station_backseat.MissionTimeout 2 h;set profile_station_backseat.NeedCommsTime 45 min;set profile_station_backseat.Lat 36.797 degree", ASAP

20211110T010942 [CommandExec]:got command schedule asap "set profile_station_backseat.Lon -121.847 degree;set profile_station_backseat:StandardEnvelopes.MaxDepth 50 m;run" 240jm 2 2.000000

20211110T010942 [CommandExec]:Scheduling command #2 of 2 with id=240jm

20211110T010942 [CommandExec]:Scheduled #2 (#2 of 2 with id='240jm'): "set profile_station_backseat.Lon -121.847 degree;set profile_station_backseat:StandardEnvelopes.MaxDepth 50 m;run", ASAP

20211110T010942 [CommandExec]:got command load ./Missions/Engineering/profile_station_backseat.xml

20211110T010945 [CommandExec]:Loaded ./Missions/Engineering/profile_station_backseat.xml

20211110T011014 [CommandExec]:got command set profile_station_backseat.MissionTimeout 2.000000 hour

20211110T011014 [CommandExec]:got command set profile_station_backseat.NeedCommsTime 45.000000 minute

20211110T011014 [CommandExec]:got command set profile_station_backseat.Lat 36.797001 degree

20211110T011027 [CommandExec]:got command set profile_station_backseat.Lon -121.847000 degree

20211110T011027 [CommandExec]:got command set profile_station_backseat:StandardEnvelopes.MaxDepth 50.000000 meter

20211110T011027 [CommandExec]:got command run

20211110T011027 [CommandExec]:Running

20211110T011027 [MissionManager]:Started mission profile_station_backseat

20211110T011029 [CTD_Seabird]:Pressure reading out of range: -10.950000 decibar

20211110T011101 [Depth_Keller]:Failed to copy Depth_Keller.enableBroadcast's data value to LCM message.

20211110T011307 [BuoyancyServo]:getPosition uart error serial timeout

20211110T011307 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20211110T011307 [BuoyancyServo]:Communications Fault

20211110T011307 [CBIT]:Communications Fault in component: BuoyancyServo

20211110T020341 [BuoyancyServo]:getPosition uart error serial timeout

20211110T020341 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20211110T020341 [BuoyancyServo]:Communications Fault

20211110T020341 [CBIT]:Communications Fault in component: BuoyancyServo

20211110T025641 [CBIT]:Beginning ground fault scan

20211110T031028 [MissionManager]:Started mission Default

20211110T031028 [WetLabsBB2FL]:LCB fault: Software Overcurrent.

20211110T031028 [WetLabsBB2FL]:Hardware Fault

20211110T031028 [CBIT]:Hardware Fault in component: WetLabsBB2FL

20211110T031831 [CommandExec]:got command run ./Missions/Maintenance/run_backseat_on_surface.xml

20211110T031832 [CommandExec]:Running ./Missions/Maintenance/run_backseat_on_surface.xml

20211110T031832 [MissionManager]:Started mission run_backseat_on_surface

20211110T032222 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20211110T032348 [BackseatComponent]:Failed to receive device response within the specified timeout.

20211110T032348 [BackseatComponent]:Communications Fault

20211110T032348 [CBIT]:Communications Fault in component: BackseatComponent

20211110T032421 [run_backseat_on_surface:CheckIn:E]:run_backseat_on_surface mission has been running for 5.804999 min

20211110T032920 [BackseatComponent]:Failed to receive device response within the specified timeout.

20211110T032920 [BackseatComponent]:Communications Fault

20211110T032920 [CBIT]:Communications Fault in component: BackseatComponent

20211110T032952 [run_backseat_on_surface:CheckIn:E]:run_backseat_on_surface mission has been running for 11.328293 min

20211110T033452 [BackseatComponent]:Failed to receive device response within the specified timeout.

20211110T033452 [BackseatComponent]:Communications Fault

20211110T033452 [CBIT]:Communications Fault in component: BackseatComponent

20211110T033525 [run_backseat_on_surface:CheckIn:E]:run_backseat_on_surface mission has been running for 16.862968 min

20211110T034548 [BackseatComponent]:LCB fault: Software Overcurrent.

20211110T034548 [BackseatComponent]:Hardware Fault

20211110T034548 [CBIT]:Hardware Fault in component: BackseatComponent

20211110T034604 [BackseatComponent]:LCB fault: Software Overcurrent.

20211110T042615 [CommandExec]:got command load ./Missions/Maintenance/ballast_and_trim.xml

20211110T042615 [WetLabsBB2FL]:LCB fault: Software Overcurrent.

20211110T042615 [WetLabsBB2FL]:Hardware Fault

20211110T042616 [CBIT]:Hardware Fault in component: WetLabsBB2FL

20211110T042617 [CommandExec]:Loaded ./Missions/Maintenance/ballast_and_trim.xml

20211110T042628 [CommandExec]:got command set ballast_and_trim.MissionTimeout 60.000000 minute

20211110T042628 [CommandExec]:got command set ballast_and_trim.Depth1 50.000000 meter

20211110T042628 [CommandExec]:got command set ballast_and_trim:StandardEnvelopes.MaxDepth 60.000000 meter

20211110T042628 [MissionManager]:Started mission ballast_and_trim

20211110T045706 completed. Estimation time: 12.97 minutes.

20211110T045706 persisted config values to: 126.383040 cc buoyancy neutral and -5.157439 mm mass default

20211110T050619 [CommandExec]:got command show stack

20211110T050619 [CommandExec]:Behavior Stack:#

20211110T050619 [Default]:Priority 0: Default:B.GoToSurface

20211110T050619 [Default:CheckIn]:Priority 1: Default:CheckIn:C.Wait

20211110T055841 [CommandExec]:got command run ./Missions/Maintenance/run_backseat_on_surface.xml

20211110T055843 [CommandExec]:Running ./Missions/Maintenance/run_backseat_on_surface.xml

20211110T055843 [MissionManager]:Started mission run_backseat_on_surface

20211110T055951 [BackseatComponent]:calanus: Running eyeris backseat app. Logging to: 20211110T055947

20211110T060019 [Depth_Keller]:Failed to copy Depth_Keller.enableBroadcast's data value to LCM message.

20211110T060225 [CommandExec]:got command failComponent

20211110T060225 [CommandExec]:Failed components:

20211110T060225 [CommandExec]:No failed Components.

20211110T060712 [CommandExec]:got command stop

20211110T060904 [CommandExec]:got command schedule clear

20211110T060904 [CommandExec]:Cleared 0 scheduled commands.

20211110T060904 [CommandExec]:got command schedule resume

20211110T060904 [CommandExec]:Scheduling is resumed

20211110T061332 [CommandExec]:got command schedule asap "load Engineering/profile_station_backseat.xml;set profile_station_backseat.MissionTimeout 1 h;set profile_station_backseat.Lat 36.797 degree;set profile_station_backseat.Lon -121.847 degree" 24em8 1 2.000000

20211110T061332 [CommandExec]:Scheduling command #1 of 2 with id=24em8

20211110T061332 [CommandExec]:Scheduled #3 (#1 of 2 with id='24em8'): "load Engineering/profile_station_backseat.xml;set profile_station_backseat.MissionTimeout 1 h;set profile_station_backseat.Lat 36.797 degree;set profile_station_backseat.Lon -121.847 degree", ASAP

20211110T061341 [CommandExec]:got command schedule asap "set profile_station_backseat.Speed 0.75 m/s;set profile_station_backseat.MaxDepth 50 m;set profile_station_backseat:StandardEnvelopes.MaxDepth 65 m;run" 24em8 2 2.000000

20211110T061341 [CommandExec]:Scheduling command #2 of 2 with id=24em8

20211110T061341 [CommandExec]:Scheduled #4 (#2 of 2 with id='24em8'): "set profile_station_backseat.Speed 0.75 m/s;set profile_station_backseat.MaxDepth 50 m;set profile_station_backseat:StandardEnvelopes.MaxDepth 65 m;run", ASAP

20211110T061341 [CommandExec]:got command load ./Missions/Engineering/profile_station_backseat.xml

20211110T061344 [CommandExec]:Loaded ./Missions/Engineering/profile_station_backseat.xml

20211110T061354 [CommandExec]:got command set profile_station_backseat.MissionTimeout 1.000000 hour

20211110T061354 [CommandExec]:got command set profile_station_backseat.Lat 36.797001 degree

20211110T061354 [CommandExec]:got command set profile_station_backseat.Lon -121.847000 degree

20211110T061407 [CommandExec]:got command set profile_station_backseat.Speed 0.750000 meter_per_second

20211110T061407 [CommandExec]:got command set profile_station_backseat.MaxDepth 50.000000 meter

20211110T061407 [CommandExec]:got command set profile_station_backseat:StandardEnvelopes.MaxDepth 65.000000 meter

20211110T061408 [MissionManager]:Started mission profile_station_backseat

20211110T061411 [CTD_Seabird]:Salinity reading out of range: 74.433754 psu

20211110T061649 [Radio_Surface]:LCB fault: Software Overcurrent.

20211110T061649 [Radio_Surface]:Hardware Fault

20211110T061650 [CBIT]:Hardware Fault in component: Radio_Surface

20211110T062016 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20211110T072135 [CommandExec]:got command run ./Missions/Maintenance/run_backseat_on_surface.xml

20211110T072136 [CommandExec]:Running ./Missions/Maintenance/run_backseat_on_surface.xml

20211110T072136 [MissionManager]:Started mission run_backseat_on_surface

20211110T073413 [Depth_Keller]:Failed to copy Depth_Keller.enableBroadcast's data value to LCM message.

20211110T073622 [BackseatComponent]:eyeris test

20211110T074635 [BackseatComponent]:LCB fault: Software Overcurrent.

20211110T074635 [BackseatComponent]:Hardware Fault

20211110T074636 [CBIT]:Hardware Fault in component: BackseatComponent

20211110T080530 [BackseatComponent]:calanus: Running eyeris backseat app. Logging to: 20211110T080525

20211110T082744 [BackseatComponent]:Hardware Fault

20211110T082745 [CBIT]:Hardware Fault in component: BackseatComponent

20211110T082942 [CommandExec]:got command schedule asap "load Engineering/profile_station_backseat.xml;set profile_station_backseat.MissionTimeout 6 h;set profile_station_backseat.Lat 36.797 degree;set profile_station_backseat.Lon -121.847 degree" 24kx5 1 2.000000

20211110T082942 [CommandExec]:Scheduling command #1 of 2 with id=24kx5

20211110T082942 [CommandExec]:Scheduled #5 (#1 of 2 with id='24kx5'): "load Engineering/profile_station_backseat.xml;set profile_station_backseat.MissionTimeout 6 h;set profile_station_backseat.Lat 36.797 degree;set profile_station_backseat.Lon -121.847 degree", ASAP

20211110T082955 [CommandExec]:got command schedule asap "set profile_station_backseat.Speed 0.85 m/s;set profile_station_backseat.MaxDepth 90 m;set profile_station_backseat:StandardEnvelopes.MaxDepth 105 m;run" 24kx5 2 2.000000

20211110T082955 [CommandExec]:Scheduling command #2 of 2 with id=24kx5

20211110T082955 [CommandExec]:Scheduled #6 (#2 of 2 with id='24kx5'): "set profile_station_backseat.Speed 0.85 m/s;set profile_station_backseat.MaxDepth 90 m;set profile_station_backseat:StandardEnvelopes.MaxDepth 105 m;run", ASAP

20211110T082955 [CommandExec]:got command load ./Missions/Engineering/profile_station_backseat.xml

20211110T082958 [CommandExec]:Loaded ./Missions/Engineering/profile_station_backseat.xml

20211110T083014 [CommandExec]:got command set profile_station_backseat.MissionTimeout 6.000000 hour

20211110T083014 [CommandExec]:got command set profile_station_backseat.Lat 36.797001 degree

20211110T083014 [CommandExec]:got command set profile_station_backseat.Lon -121.847000 degree

20211110T083033 [CommandExec]:got command set profile_station_backseat.Speed 0.850000 meter_per_second

20211110T083033 [CommandExec]:got command set profile_station_backseat.MaxDepth 90.000000 meter

20211110T083033 [CommandExec]:got command set profile_station_backseat:StandardEnvelopes.MaxDepth 105.000000 meter

20211110T083034 [MissionManager]:Started mission profile_station_backseat

20211110T083142 [BackseatComponent]:calanus: Running eyeris backseat app. Logging to: 20211110T083137

20211110T083706 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20211110T085652 [CBIT]:Beginning ground fault scan

20211110T093320 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20211110T093342 [CTD_Seabird]:Salinity reading out of range: 27.811028 psu

20211110T101325 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20211110T110805 [CTD_Seabird]:Failed to parse device response: 19#

20211110T122438 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20211110T133555 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20211110T143332 [NAL9602]:Inadequate Iridium signal strength reported: 0

20211110T145703 [CBIT]:Beginning ground fault scan

20211110T153555 [CommandExec]:got command schedule asap "load Engineering/profile_station_backseat.xml;set profile_station_backseat.Lat 36.797 degree;set profile_station_backseat.Lon -121.847 degree;set profile_station_backseat.YoYoMaxDepth 90 m" 254nb 1 2.000000

20211110T153555 [CommandExec]:Scheduling command #1 of 2 with id=254nb

20211110T153555 [CommandExec]:Scheduled #7 (#1 of 2 with id='254nb'): "load Engineering/profile_station_backseat.xml;set profile_station_backseat.Lat 36.797 degree;set profile_station_backseat.Lon -121.847 degree;set profile_station_backseat.YoYoMaxDepth 90 m", ASAP

20211110T153603 [CommandExec]:got command schedule asap "set profile_station_backseat.MaxDepth 100 m;set profile_station_backseat:StandardEnvelopes.MaxDepth 100 m;run" 254nb 2 2.000000

20211110T153603 [CommandExec]:Scheduling command #2 of 2 with id=254nb

20211110T153603 [CommandExec]:Scheduled #8 (#2 of 2 with id='254nb'): "set profile_station_backseat.MaxDepth 100 m;set profile_station_backseat:StandardEnvelopes.MaxDepth 100 m;run", ASAP

20211110T153616 [CommandExec]:got command set profile_station_backseat.YoYoMaxDepth 90.000000 meter

20211110T153629 [CommandExec]:got command set profile_station_backseat.MaxDepth 100.000000 meter

20211110T153747 [BuoyancyServo]:getPosition uart error serial timeout

20211110T153747 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20211110T153747 [BuoyancyServo]:Communications Fault

20211110T153747 [CBIT]:Communications Fault in component: BuoyancyServo

20211110T165823 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20211110T174748 [CommandExec]:got command stop

20211110T174748 [CommandExec]:Scheduling is paused

20211110T175326 [CommandExec]:got command gfscan

20211110T175734 [CommandExec]:got command gfscan

20211110T175934 [CommandExec]:got command gfscan

20211110T181748 [CommandExec]:got command get PowerOnly.loadAtStartup

20211110T181748 [CommandExec]:PowerOnly.loadAtStartup 0 bool

20211110T181914 [CommandExec]:got command get BackseatComponent.simulateHardware

20211110T181914 [CommandExec]:BackseatComponent.simulateHardware 0 bool

20211110T185108 [CommandExec]:got command schedule asap "load Engineering/profile_station_backseat.xml;set profile_station_backseat.Lat 36.797 degree;set profile_station_backseat.Lon -121.847 degree;set profile_station_backseat.YoYoMaxDepth 90 m" 25doh 1 2.000000

20211110T185108 [CommandExec]:Scheduling command #1 of 2 with id=25doh

20211110T185108 [CommandExec]:Scheduled #9 (#1 of 2 with id='25doh'): "load Engineering/profile_station_backseat.xml;set profile_station_backseat.Lat 36.797 degree;set profile_station_backseat.Lon -121.847 degree;set profile_station_backseat.YoYoMaxDepth 90 m", ASAP

20211110T185116 [CommandExec]:got command schedule asap "set profile_station_backseat.MaxDepth 100 m;set profile_station_backseat:StandardEnvelopes.MaxDepth 100 m;run" 25doh 2 2.000000

20211110T185116 [CommandExec]:Scheduling command #2 of 2 with id=25doh

20211110T185116 [CommandExec]:Scheduled #10 (#2 of 2 with id='25doh'): "set profile_station_backseat.MaxDepth 100 m;set profile_station_backseat:StandardEnvelopes.MaxDepth 100 m;run", ASAP

20211110T185130 [CommandExec]:got command set profile_station_backseat.YoYoMaxDepth 90.000000 meter

20211110T200033 [CommandExec]:got command stop

20211110T200034 [WetLabsBB2FL]:LCB fault: LCB Watchdog Reset. Invalid Command. Hardware Overcurrent Shutdown. Software Overcurrent.

20211110T212345 [BPC1]:BPC1B: No match for serial number FFFF in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20211110T215116 [CommandExec]:got command schedule asap "load Engineering/profile_station_backseat.xml;set profile_station_backseat.Lat 36.797 degree;set profile_station_backseat.Lon -121.847 degree;set profile_station_backseat.YoYoMaxDepth 90 m" 25m0p 1 2.000000

20211110T215116 [CommandExec]:Scheduling command #1 of 2 with id=25m0p

20211110T215116 [CommandExec]:Scheduled #11 (#1 of 2 with id='25m0p'): "load Engineering/profile_station_backseat.xml;set profile_station_backseat.Lat 36.797 degree;set profile_station_backseat.Lon -121.847 degree;set profile_station_backseat.YoYoMaxDepth 90 m", ASAP

20211110T215125 [CommandExec]:got command schedule asap "set profile_station_backseat.MaxDepth 100 m;set profile_station_backseat:StandardEnvelopes.MaxDepth 100 m;run" 25m0p 2 2.000000

20211110T215125 [CommandExec]:Scheduling command #2 of 2 with id=25m0p

20211110T215125 [CommandExec]:Scheduled #12 (#2 of 2 with id='25m0p'): "set profile_station_backseat.MaxDepth 100 m;set profile_station_backseat:StandardEnvelopes.MaxDepth 100 m;run", ASAP

20211110T215141 [CommandExec]:got command set profile_station_backseat.YoYoMaxDepth 90.000000 meter

20211110T215529 [Radio_Surface]:LCB fault: Software Overcurrent.

20211110T215529 [Radio_Surface]:Hardware Fault

20211110T215529 [CBIT]:Hardware Fault in component: Radio_Surface

20211111T001046 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20211111T004756 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20211111T020254 [CommandExec]:got command schedule asap "load Engineering/profile_station_backseat.xml;set profile_station_backseat.Lat 36.797 degree;set profile_station_backseat.Lon -121.847 degree;set profile_station_backseat.YoYoMaxDepth 90 m" 25xok 1 2.000000

20211111T020254 [CommandExec]:Scheduling command #1 of 2 with id=25xok

20211111T020254 [CommandExec]:Scheduled #13 (#1 of 2 with id='25xok'): "load Engineering/profile_station_backseat.xml;set profile_station_backseat.Lat 36.797 degree;set profile_station_backseat.Lon -121.847 degree;set profile_station_backseat.YoYoMaxDepth 90 m", ASAP

20211111T020303 [CommandExec]:got command schedule asap "set profile_station_backseat.MaxDepth 100 m;set profile_station_backseat:StandardEnvelopes.MaxDepth 100 m;run" 25xok 2 2.000000

20211111T020303 [CommandExec]:Scheduling command #2 of 2 with id=25xok

20211111T020303 [CommandExec]:Scheduled #14 (#2 of 2 with id='25xok'): "set profile_station_backseat.MaxDepth 100 m;set profile_station_backseat:StandardEnvelopes.MaxDepth 100 m;run", ASAP

20211111T030203 [CTD_Seabird]:Failed to parse device response: 9,3.85965,3067.14#

20211111T045042 [CommandExec]:got command load ./Missions/Transport/transit.xml

20211111T045043 [CommandExec]:Loaded ./Missions/Transport/transit.xml

20211111T045050 [CommandExec]:got command set transit.NeedCommsTime 15.000000 minute

20211111T045050 [CommandExec]:got command set transit.Latitude 36.797001 degree

20211111T045050 [CommandExec]:got command set transit.Longitude -121.847000 degree

20211111T045050 [MissionManager]:Started mission transit

20211111T045052 [transit:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20211111T045339 [Radio_Surface]:LCB fault: Software Overcurrent.

20211111T045339 [Radio_Surface]:Hardware Fault

20211111T045340 [CBIT]:Hardware Fault in component: Radio_Surface

20211111T051220 [CommandExec]:got command schedule asap "load Science/sci2_backseat.xml;set sci2_backseat.NeedCommsTime 30 min;set sci2_backseat.Lat1 36.797 degree;set sci2_backseat.Lon1 -121.847 degree;set sci2_backseat.Lat2 36.79815 degree;set sci2_backseat.Lon2 -121.88919 degree" 266g5 1 3.000000

20211111T051220 [CommandExec]:Scheduling command #1 of 3 with id=266g5

20211111T051220 [CommandExec]:Scheduled #15 (#1 of 3 with id='266g5'): "load Science/sci2_backseat.xml;set sci2_backseat.NeedCommsTime 30 min;set sci2_backseat.Lat1 36.797 degree;set sci2_backseat.Lon1 -121.847 degree;set sci2_backseat.Lat2 36.79815 degree;set sci2_backseat.Lon2 -121.88919 degree", ASAP

20211111T051229 [CommandExec]:got command schedule asap "set sci2_backseat.Lat3 36.797 degree;set sci2_backseat.Lon3 -121.847 degree;set sci2_backseat.YoYoMaxDepth 150 m;set sci2_backseat.YoYoUpPitch 10 degree;set sci2_backseat.YoYoDownPitch -10 degree;set sci2_backseat.MaxDepth 200 m" 266g5 2 3.000000

20211111T051229 [CommandExec]:Scheduling command #2 of 3 with id=266g5

20211111T051229 [CommandExec]:Scheduled #16 (#2 of 3 with id='266g5'): "set sci2_backseat.Lat3 36.797 degree;set sci2_backseat.Lon3 -121.847 degree;set sci2_backseat.YoYoMaxDepth 150 m;set sci2_backseat.YoYoUpPitch 10 degree;set sci2_backseat.YoYoDownPitch -10 degree;set sci2_backseat.MaxDepth 200 m", ASAP

20211111T051237 [CommandExec]:got command schedule asap "run" 266g5 3 3.000000

20211111T051237 [CommandExec]:Scheduling command #3 of 3 with id=266g5

20211111T051237 [CommandExec]:Scheduled #17 (#3 of 3 with id='266g5'): "run", ASAP

20211111T051238 [CommandExec]:got command load ./Missions/Science/sci2_backseat.xml

20211111T051240 [CommandExec]:Loaded ./Missions/Science/sci2_backseat.xml

20211111T051255 [CommandExec]:got command set sci2_backseat.NeedCommsTime 30.000000 minute

20211111T051255 [CommandExec]:got command set sci2_backseat.Lat1 36.797001 degree

20211111T051255 [CommandExec]:got command set sci2_backseat.Lon1 -121.847000 degree

20211111T051255 [CommandExec]:got command set sci2_backseat.Lat2 36.798149 degree

20211111T051255 [CommandExec]:got command set sci2_backseat.Lon2 -121.889191 degree

20211111T051317 [CommandExec]:got command set sci2_backseat.Lat3 36.797001 degree

20211111T051317 [CommandExec]:got command set sci2_backseat.Lon3 -121.847000 degree

20211111T051317 [CommandExec]:got command set sci2_backseat.YoYoMaxDepth 150.000000 meter

20211111T051317 [CommandExec]:got command set sci2_backseat.YoYoUpPitch 10.000000 degree

20211111T051317 [CommandExec]:got command set sci2_backseat.YoYoDownPitch -10.000000 degree

20211111T051317 [CommandExec]:got command set sci2_backseat.MaxDepth 200.000000 meter

20211111T051317 [MissionManager]:Started mission sci2_backseat

20211111T051319 [sci2_backseat:P.AltitudeEnvelope]:Altitude Measurement is not Active.