*JS re-processed this data set 1/12/2017. For some reason the previous QC files were only two days of data, should be 7+.

BOG Line, CCE BIN and BED status. Cloudy conditions throughout most of deployment, powered down Eco-Puck after first couple of days. MET only on for one data point.

Two negative spikes in O2 were removed. O2 were within 5 umol/kg of nearby M1 (WG lower than M1), very good.

pH-vs-T relationship was generally linear with some spread but no obvious outliers. pH was VERY high (+0.05 to 0.07) compared to that predicted by pCO2w, and VERY high (+0.10) compared to nearby M1. Something is going on with the pH sensor. All pH data were removed.

--

veh = 'wgTiny'
dep = '20151209'
# calibration/config
CCUname = 'TinyToo'
CCUnum = '1531399927' #Tiny = '794595959'; TinyToo = '1531399927'
CTDserNum = '0118'
O2serNum = '0212'
O2calDate = '5/21/2014'
O2cal = [2.9681e-4, -787.66, 1.56, -2.7123e-3, 2.0315e-4, -3.8309e-6, 0.036]
EPserNum = 'BB2FLMBA-1133'
EPcalDate = '12/4/2013'
EPcal = [[1.08E-05, 47], [3.95E-06, 46], [0.0121, 49]] #EcoPuck factory cal
pHconfig = ['N/A', 'N/A', 'N/A'] #cap adapter, electrode, housing
pHcalDate = '4/20/2015'
pHbatch = '136'
pHcal = [-0.397897, 293.12]
CO2id = 'WG1'
CO2calDate = '5/5/2014'
CO2stnd = 406.46
CO2cal = [-30.27890, 0.43639, 1.09200, -0.00243]
CO2cal_v2 = [-5.4872e-05, +3.0826e-02, -1.7203e+00, -9.9368e-08, +6.2298e-05, 
             -5.8365e-02, +5.2634e-06, -2.0836e-03, +1.7030e+00, -6.1803e-05, 
             +1.0173e+00, -1.1505e+01]

tBeg = datetime.datetime(2015, 12, 10, 1, 5, 0, 0, timezone('UTC'))
tEnd = datetime.datetime(2015, 12, 17, 19, 25, 0, 0, timezone('UTC'))