| Copyright 2001-2003 MBARI Kent Headley, Bob Herlien MBARI provides this documentation and code "as is", with no warranty, express or implied, of its quality or consistency. It is provided without support and without obligation on the part of the Monterey Bay Aquarium Research Institute to assist in its use, correction, modification, or enhancement. This information should not be published or distributed to third parties without specific written permission from MBARI. |
This document contains notes related to mooring deployments (M1-4, EQPAC, Drifters). It is intended to provide general information and practical guidelines required to configure and operate OASIS3 moorings.
This document was modified from Kent Headley's original OASIS
Mooring Guide, which in turn was compiled from a number of sources, including
the original system design and implementation team, the MBARI Observatory Support
Group, scientific data users, and personal notes.
Turn Around Existing OASIS3 Can
Configure an OASIS3 Can for Deployment
Prepare a New OASIS3 Can for OASIS3 Software
Shore-side Configuration Files
OASIS3 Command Reference
OASIS3 Memory Map
OASIS3 Limits
OASIS3 Reset Commands
OASIS3 Design RequirementsOASIS3 System Sources
Instrument Driver Sources
Compilation
OASIS3 Processing Scripts/Utilities
Configuration Files