2019-05-29T22:19:41.359Z,1559168381.359 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg 2019-05-29T22:19:47.141Z,1559168387.141 [SBIT](IMPORTANT): git: 2019-05-29 2019-05-29T22:19:47.142Z,1559168387.142 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2019-05-29T22:19:48.675Z,1559168388.675 [RudderServo](FAULT): Rudder failed to initialize 2019-05-29T22:20:26.824Z,1559168426.824 [SBIT](IMPORTANT): Beginning Startup BIT 2019-05-29T22:20:26.834Z,1559168426.834 [CBIT](IMPORTANT): Beginning ground fault scan 2019-05-29T22:20:37.591Z,1559168437.591 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.012008 CHAN A1 (24V): -0.025898 CHAN A2 (12V): -0.007497 CHAN A3 (5V): -0.003040 CHAN B0 (3.3V): -0.000143 CHAN B1 (3.15aV): -0.000293 CHAN B2 (3.15bV): 0.000217 CHAN B3 (GND): 0.001480 OPEN: 0.005686 Full Scale Calc: 4.765 mA, -1.589 mA 2019-05-29T22:21:20.321Z,1559168480.321 [SBIT](IMPORTANT): SBIT PASSED 2019-05-29T22:21:20.383Z,1559168480.383 [CommandLine](IMPORTANT): got command configSet list 2019-05-29T22:21:20.384Z,1559168480.384 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2019-05-29T22:21:20.384Z,1559168480.384 [CommandLine](IMPORTANT): BPC1.batterySamplingInterval=3 hour; 2019-05-29T22:21:20.385Z,1559168480.385 [CommandLine](IMPORTANT): BPC1.loadAtStartup=1 bool; 2019-05-29T22:21:20.385Z,1559168480.385 [CommandLine](IMPORTANT): DUSBL_Hydroid.detectionThreshold=40 count; 2019-05-29T22:21:20.385Z,1559168480.385 [CommandLine](IMPORTANT): Express linearApproximation DUSBL_Hydroid.range 2.000000 meter; 2019-05-29T22:21:20.385Z,1559168480.385 [CommandLine](IMPORTANT): Express linearApproximation DUSBL_Hydroid.xAngle 2.000000 angular_degree; 2019-05-29T22:21:20.385Z,1559168480.385 [CommandLine](IMPORTANT): Express linearApproximation RDI_Pathfinder.BottomVelocityFlag 0.000000 count; 2019-05-29T22:21:20.385Z,1559168480.385 [CommandLine](IMPORTANT): Express linearApproximation RDI_Pathfinder.height_above_sea_floor 2.000000 meter; 2019-05-29T22:21:20.385Z,1559168480.385 [CommandLine](IMPORTANT): Express none TrackAcousticContact.contact_latitude; 2019-05-29T22:21:20.385Z,1559168480.385 [CommandLine](IMPORTANT): Express none TrackAcousticContact.contact_longitude; 2019-05-29T22:21:20.386Z,1559168480.386 [CommandLine](IMPORTANT): Express linearApproximation acoustic_contact_range 1.000000 meter; 2019-05-29T22:21:20.386Z,1559168480.386 [CommandLine](IMPORTANT): Express linearApproximation mass_concentration_of_chlorophyll_in_sea_water 5.000000 microgram_per_liter; 2019-05-29T22:21:20.386Z,1559168480.386 [CommandLine](IMPORTANT): Express none mass_concentration_of_oxygen_in_sea_water; 2019-05-29T22:21:20.386Z,1559168480.386 [CommandLine](IMPORTANT): NAL9602.fastGPSFix=1 bool; 2019-05-29T22:21:20.386Z,1559168480.386 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=190 cubic_centimeter; 2019-05-29T22:21:20.386Z,1559168480.386 [CommandLine](IMPORTANT): VerticalControl.massDefault=5 millimeter; 2019-05-29T22:21:20.712Z,1559168480.712 [MissionManager](IMPORTANT): Started mission Startup 2019-05-29T22:23:21.527Z,1559168601.527 [MissionManager](IMPORTANT): Started mission Default 2019-05-29T22:33:28.519Z,1559169208.519 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.110198 min 2019-05-29T22:38:32.846Z,1559169512.846 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2019-05-29T22:38:52.654Z,1559169532.654 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 15.512095 min 2019-05-29T22:44:17.502Z,1559169857.502 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.926229 min 2019-05-29T22:44:50.287Z,1559169890.287 [NAL9602](FAULT): received: +CSQ:0 OK42, 0, 0, 0, 0 OK 2019-05-29T22:44:51.020Z,1559169891.020 [NAL9602](FAULT): LCB fault: LCB Watchdog Reset. Hardware Overcurrent Shutdown. 2019-05-29T22:45:29.451Z,1559169929.451 [CommandLine](IMPORTANT): got command failComponent 2019-05-29T22:45:29.452Z,1559169929.452 [CommandLine](IMPORTANT): Failed components: 2019-05-29T22:45:29.452Z,1559169929.452 [CommandLine](IMPORTANT): No failed Components. 2019-05-29T22:49:41.942Z,1559170181.942 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 26.333429 min 2019-05-29T22:49:45.600Z,1559170185.600 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2019-05-29T22:53:17.229Z,1559170397.229 [CommandLine](IMPORTANT): got command restart application 2019-05-29T22:53:48.539Z,1559170428.539 [](CRITICAL): SIGSEGV: address not mapped to object 2019-05-29T22:53:48.539Z,1559170428.539 [](CRITICAL): Bad address: 0x20 2019-05-29T22:53:48.539Z,1559170428.539 [](CRITICAL): Backtrace: ./bin/LRAUV(_ZN7PCaller20DefaultSignalHandlerEiP7siginfoPv+0x20) [0x179b5c] ./bin/LRAUV(_ZN9Component7executeEv+0x1f8) [0xd6e60] ./bin/LRAUV(_ZN7PCaller10PThreadRunEPv+0xbc) [0x1796f8] 2019-05-29T22:53:48.553Z,1559170428.553 [](CRITICAL): SIGSEGV: address not mapped to object 2019-05-29T22:53:48.553Z,1559170428.553 [](CRITICAL): Bad address: 0x0 2019-05-29T22:53:48.553Z,1559170428.553 [](CRITICAL): Backtrace: ./bin/LRAUV(_ZN7PCaller20DefaultSignalHandlerEiP7siginfoPv+0x20) [0x179b5c] ./bin/LRAUV(_ZN20UniversalDataElement16notifyChangeDoneEP10DataWriter+0x60) [0x106eb0] ./bin/LRAUV(_ZN11DataElement18registerChangeDoneEv+0x1c) [0xe000c] ./bin/LRAUV(_ZN7PCaller20DefaultSignalHandlerEiP7siginfoPv+0x110) [0x179c4c] [(nil)] 2019-05-29T22:53:48.578Z,1559170428.578 [](CRITICAL): SIGSEGV: address not mapped to object 2019-05-29T22:53:48.578Z,1559170428.578 [](CRITICAL): Bad address: 0x0 2019-05-29T22:53:48.579Z,1559170428.579 [](CRITICAL): Backtrace: ./bin/LRAUV(_ZN7PCaller20DefaultSignalHandlerEiP7siginfoPv+0x20) [0x179b5c] Modules/Sensor.so(_ZN7AHRS_M210readConfigEv+0x28) [0x40514508] ./bin/LRAUV(_ZN9Component7executeEv+0x31c) [0xd6f84] ./bin/LRAUV(_ZN7PCaller10PThreadRunEPv+0xbc) [0x1796f8] 2019-05-29T22:53:48.586Z,1559170428.586 [](CRITICAL): SIGSEGV: address not mapped to object 2019-05-29T22:53:48.586Z,1559170428.586 [](CRITICAL): Bad address: 0x6E676A23 2019-05-29T22:53:48.586Z,1559170428.586 [](CRITICAL): Backtrace: ./bin/LRAUV(_ZN7PCaller20DefaultSignalHandlerEiP7siginfoPv+0x20) [0x179b5c] ./bin/LRAUV(_ZN11DataElement18registerChangeDoneEv+0x1c) [0xe000c] ./bin/LRAUV(_ZN7PCaller20DefaultSignalHandlerEiP7siginfoPv+0x110) [0x179c4c] [(nil)] 2019-05-29T22:53:48.603Z,1559170428.603 [](CRITICAL): SIGSEGV: address not mapped to object 2019-05-29T22:53:48.604Z,1559170428.604 [](CRITICAL): Bad address: 0x0 2019-05-29T22:53:48.604Z,1559170428.604 [](CRITICAL): Backtrace: ./bin/LRAUV(_ZN7PCaller20DefaultSignalHandlerEiP7siginfoPv+0x20) [0x179b5c] Modules/Sensor.so(_ZN12Depth_Keller10readConfigEv+0x28) [0x40535d3c] ./bin/LRAUV(_ZN9Component7executeEv+0x1f8) [0xd6e60] ./bin/LRAUV(_ZN7PCaller10PThreadRunEPv+0xbc) [0x1796f8] 2019-05-29T22:53:48.631Z,1559170428.631 [](CRITICAL): SIGSEGV: address not mapped to object 2019-05-29T22:53:48.631Z,1559170428.631 [](CRITICAL): Bad address: 0x0 2019-05-29T22:53:48.632Z,1559170428.632 [](CRITICAL): Backtrace: ./bin/LRAUV(_ZN7PCaller20DefaultSignalHandlerEiP7siginfoPv+0x20) [0x179b5c] Modules/Sensor.so(_ZN10Micromodem8runnableEv+0x90) [0x40544310] ./bin/LRAUV(_ZN9Component7executeEv+0x31c) [0xd6f84] ./bin/LRAUV(_ZN7PCaller10PThreadRunEPv+0xbc) [0x1796f8] 2019-05-29T22:53:48.651Z,1559170428.651 [NAL9602](CRITICAL): SIGSEGV: address not mapped to object 2019-05-29T22:53:48.651Z,1559170428.651 [NAL9602](CRITICAL): Bad address: 0x0 2019-05-29T22:53:48.652Z,1559170428.652 [NAL9602](CRITICAL): Backtrace: ./bin/LRAUV(_ZN7PCaller20DefaultSignalHandlerEiP7siginfoPv+0x20) [0x179b5c] ./bin/LRAUV(_ZN9Component7executeEv+0x31c) [0xd6f84] ./bin/LRAUV(_ZN7PCaller10PThreadRunEPv+0xbc) [0x1796f8]