2019-05-01T00:12:38.778Z,1556669558.778 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg 2019-05-01T00:12:43.905Z,1556669563.905 [SBIT](IMPORTANT): git: 2019-04-10-23-g672f59b 2019-05-01T00:12:43.905Z,1556669563.905 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2019-05-01T00:12:45.385Z,1556669565.385 [RudderServo](FAULT): Rudder failed to initialize 2019-05-01T00:13:24.981Z,1556669604.981 [CommandLine](IMPORTANT): got command failComponent 2019-05-01T00:13:24.982Z,1556669604.982 [CommandLine](IMPORTANT): Failed components: 2019-05-01T00:13:24.982Z,1556669604.982 [CommandLine](IMPORTANT): No failed Components. 2019-05-01T00:13:28.399Z,1556669608.399 [SBIT](IMPORTANT): Beginning Startup BIT 2019-05-01T00:13:28.408Z,1556669608.408 [CBIT](IMPORTANT): Beginning ground fault scan 2019-05-01T00:13:34.598Z,1556669614.598 [CommandLine](IMPORTANT): got command failComponent 2019-05-01T00:13:34.598Z,1556669614.598 [CommandLine](IMPORTANT): Failed components: 2019-05-01T00:13:34.598Z,1556669614.598 [CommandLine](IMPORTANT): No failed Components. 2019-05-01T00:13:39.174Z,1556669619.174 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.010980 CHAN A1 (24V): -0.027836 CHAN A2 (12V): -0.006549 CHAN A3 (5V): -0.002006 CHAN B0 (3.3V): 0.000687 CHAN B1 (3.15aV): 0.000437 CHAN B2 (3.15bV): -0.000073 CHAN B3 (GND): 0.001707 OPEN: 0.007231 Full Scale Calc: 4.765 mA, -1.589 mA 2019-05-01T00:14:22.537Z,1556669662.537 [SBIT](IMPORTANT): SBIT PASSED 2019-05-01T00:14:22.578Z,1556669662.578 [CommandLine](IMPORTANT): got command configSet list 2019-05-01T00:14:22.578Z,1556669662.578 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2019-05-01T00:14:22.579Z,1556669662.579 [CommandLine](IMPORTANT): BPC1.batterySamplingInterval=3 hour; 2019-05-01T00:14:22.579Z,1556669662.579 [CommandLine](IMPORTANT): BPC1.loadAtStartup=1 bool; 2019-05-01T00:14:22.579Z,1556669662.579 [CommandLine](IMPORTANT): DUSBL_Hydroid.detectionThreshold=10 count; 2019-05-01T00:14:22.579Z,1556669662.579 [CommandLine](IMPORTANT): Express linearApproximation DUSBL_Hydroid.range 2.000000 meter; 2019-05-01T00:14:22.579Z,1556669662.579 [CommandLine](IMPORTANT): Express linearApproximation DUSBL_Hydroid.xAngle 2.000000 angular_degree; 2019-05-01T00:14:22.579Z,1556669662.579 [CommandLine](IMPORTANT): Express linearApproximation RDI_Pathfinder.BottomVelocityFlag 0.000000 count; 2019-05-01T00:14:22.579Z,1556669662.579 [CommandLine](IMPORTANT): Express linearApproximation RDI_Pathfinder.height_above_sea_floor 2.000000 meter; 2019-05-01T00:14:22.580Z,1556669662.580 [CommandLine](IMPORTANT): Express none TrackAcousticContact.contact_latitude; 2019-05-01T00:14:22.580Z,1556669662.580 [CommandLine](IMPORTANT): Express none TrackAcousticContact.contact_longitude; 2019-05-01T00:14:22.580Z,1556669662.580 [CommandLine](IMPORTANT): Express linearApproximation acoustic_contact_range 1.000000 meter; 2019-05-01T00:14:22.580Z,1556669662.580 [CommandLine](IMPORTANT): NAL9602.fastGPSFix=1 bool; 2019-05-01T00:14:22.580Z,1556669662.580 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=190 cubic_centimeter; 2019-05-01T00:14:22.580Z,1556669662.580 [CommandLine](IMPORTANT): VerticalControl.massDefault=6 millimeter; 2019-05-01T00:14:22.899Z,1556669662.899 [MissionManager](IMPORTANT): Started mission Startup 2019-05-01T00:14:30.094Z,1556669670.094 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:14:30.095Z,1556669670.095 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:15:54.630Z,1556669754.630 [MissionManager](IMPORTANT): Started mission Default 2019-05-01T00:19:23.490Z,1556669963.490 [CommandLine](IMPORTANT): got command run ./Missions/Maintenance/DUSBL.xml 2019-05-01T00:19:23.706Z,1556669963.706 [CommandLine](IMPORTANT): Running ./Missions/Maintenance/DUSBL.xml 2019-05-01T00:19:23.964Z,1556669963.964 [MissionManager](IMPORTANT): Started mission DUSBL 2019-05-01T00:21:05.743Z,1556670065.743 [CommandLine](IMPORTANT): got command stop 2019-05-01T00:21:05.743Z,1556670065.743 [CommandLine](IMPORTANT): Scheduling is paused 2019-05-01T00:21:06.183Z,1556670066.183 [MissionManager](IMPORTANT): Started mission Default 2019-05-01T00:26:47.559Z,1556670407.559 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 5.682742 min 2019-05-01T00:31:59.617Z,1556670719.617 [CommandLine](IMPORTANT): got command failComponent 2019-05-01T00:31:59.617Z,1556670719.617 [CommandLine](IMPORTANT): Failed components: 2019-05-01T00:31:59.617Z,1556670719.617 [CommandLine](IMPORTANT): No failed Components. 2019-05-01T00:32:10.783Z,1556670730.783 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 11.069772 min 2019-05-01T00:33:01.766Z,1556670781.766 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:01.766Z,1556670781.766 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:02.494Z,1556670782.494 [Micromodem](FAULT): LCB 2 fault: Software Overcurrent. 2019-05-01T00:33:02.706Z,1556670782.706 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:02.706Z,1556670782.706 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:03.042Z,1556670783.042 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:03.042Z,1556670783.042 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:03.393Z,1556670783.393 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:03.394Z,1556670783.394 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:03.726Z,1556670783.726 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:03.726Z,1556670783.726 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:03.993Z,1556670783.993 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:03.994Z,1556670783.994 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:05.170Z,1556670785.170 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:05.170Z,1556670785.170 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:05.561Z,1556670785.561 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:05.562Z,1556670785.562 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:05.717Z,1556670785.717 [Micromodem](FAULT): LCB 2 fault: Software Overcurrent. 2019-05-01T00:33:05.835Z,1556670785.835 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:05.835Z,1556670785.835 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:06.057Z,1556670786.057 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:06.058Z,1556670786.058 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:06.305Z,1556670786.305 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:06.306Z,1556670786.306 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:06.586Z,1556670786.586 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:06.587Z,1556670786.587 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:08.551Z,1556670788.551 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:08.552Z,1556670788.552 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:08.592Z,1556670788.592 [CBIT](FAULT): Hardware Fault in component: Micromodem 2019-05-01T00:33:08.861Z,1556670788.861 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:08.862Z,1556670788.862 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:09.122Z,1556670789.122 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:09.122Z,1556670789.122 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:09.370Z,1556670789.370 [Micromodem](FAULT): LCB 2 fault: Software Overcurrent. 2019-05-01T00:33:09.378Z,1556670789.378 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:09.379Z,1556670789.379 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:09.613Z,1556670789.613 [CommandLine](IMPORTANT): got command failComponent hardware Micromodem 2019-05-01T00:33:09.614Z,1556670789.614 [CommandLine](IMPORTANT): Micromodem failureMode is Hardware Fault 2019-05-01T00:33:14.879Z,1556670794.879 [CommandLine](IMPORTANT): got command failComponent 2019-05-01T00:33:14.879Z,1556670794.879 [CommandLine](IMPORTANT): Failed components: 2019-05-01T00:33:14.880Z,1556670794.880 [CommandLine](IMPORTANT): Micromodem: Hardware Fault 2019-05-01T00:34:44.979Z,1556670884.979 [CommandLine](IMPORTANT): got command failComponent 2019-05-01T00:34:44.979Z,1556670884.979 [CommandLine](IMPORTANT): Failed components: 2019-05-01T00:34:44.979Z,1556670884.979 [CommandLine](IMPORTANT): Micromodem: Hardware Fault 2019-05-01T00:34:48.322Z,1556670888.322 [CommandLine](IMPORTANT): got command failComponent none Micromodem 2019-05-01T00:34:48.323Z,1556670888.323 [CommandLine](IMPORTANT): Micromodem failureMode is No Fault 2019-05-01T00:35:13.561Z,1556670913.561 [CommandLine](IMPORTANT): got command get Onboard.Humidity 2019-05-01T00:35:13.562Z,1556670913.562 [CommandLine](IMPORTANT): Onboard.Humidity 12.312294 % 2019-05-01T00:37:33.996Z,1556671053.996 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 16.457048 min 2019-05-01T00:42:37.782Z,1556671357.782 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2019-05-01T00:42:56.824Z,1556671376.824 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.837248 min 2019-05-01T00:46:09.810Z,1556671569.810 [CommandLine](IMPORTANT): got command run ./Missions/Maintenance/DUSBL.xml 2019-05-01T00:46:09.958Z,1556671569.958 [CommandLine](IMPORTANT): Running ./Missions/Maintenance/DUSBL.xml 2019-05-01T00:46:10.325Z,1556671570.325 [MissionManager](IMPORTANT): Started mission DUSBL 2019-05-01T00:47:55.359Z,1556671675.359 [MissionManager](IMPORTANT): Started mission Default 2019-05-01T00:48:41.869Z,1556671721.869 [NAL9602](FAULT): received: +CSQ:1 OK74, 2, 0, 0, 0 OK 2019-05-01T00:50:46.830Z,1556671846.830 [CommandLine](IMPORTANT): got command run ./Missions/Maintenance/DUSBL.xml 2019-05-01T00:50:46.932Z,1556671846.932 [CommandLine](IMPORTANT): Running ./Missions/Maintenance/DUSBL.xml 2019-05-01T00:50:47.065Z,1556671847.065 [MissionManager](IMPORTANT): Started mission DUSBL 2019-05-01T00:52:27.137Z,1556671947.137 [CommandLine](IMPORTANT): got command quit 2019-05-01T00:52:28.880Z,1556671948.880 [MissionManager](IMPORTANT): Started mission Default