2018-11-14T23:38:47.544Z,1542238727.544 [Supervisor](DEBUG): Initializing supervisor.
2018-11-14T23:38:47.547Z,1542238727.547 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2018-11-14T23:38:47.548Z,1542238727.548 [SyncHandler](INFO): Protected caller Thread ID is 1473
2018-11-14T23:38:47.548Z,1542238727.548 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2018-11-14T23:38:47.549Z,1542238727.549 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2018-11-14T23:38:47.549Z,1542238727.549 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 1474
2018-11-14T23:38:47.552Z,1542238727.552 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2018-11-14T23:38:47.565Z,1542238727.565 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2018-11-14T23:38:47.565Z,1542238727.565 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2018-11-14T23:38:47.566Z,1542238727.566 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 1475
2018-11-14T23:38:47.567Z,1542238727.567 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2018-11-14T23:38:47.568Z,1542238727.568 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2018-11-14T23:38:47.568Z,1542238727.568 [logger ThreadHandler](INFO): Protected caller Thread ID is 1476
2018-11-14T23:38:47.570Z,1542238727.570 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2018-11-14T23:38:47.570Z,1542238727.570 [Supervisor](INFO): Looking for Config files in directory: Config/
2018-11-14T23:38:47.572Z,1542238727.572 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2018-11-14T23:38:47.960Z,1542238727.960 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2018-11-14T23:38:47.960Z,1542238727.960 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2018-11-14T23:38:48.418Z,1542238728.418 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2018-11-14T23:38:48.419Z,1542238728.419 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2018-11-14T23:38:48.764Z,1542238728.764 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2018-11-14T23:38:48.765Z,1542238728.765 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2018-11-14T23:38:48.961Z,1542238728.961 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2018-11-14T23:38:48.961Z,1542238728.961 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2018-11-14T23:38:49.414Z,1542238729.414 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2018-11-14T23:38:49.415Z,1542238729.415 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2018-11-14T23:38:49.895Z,1542238729.895 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2018-11-14T23:38:49.895Z,1542238729.895 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2018-11-14T23:38:49.000Z,1542238730.000 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2018-11-14T23:38:50.001Z,1542238730.001 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2018-11-14T23:38:50.200Z,1542238730.200 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2018-11-14T23:38:50.200Z,1542238730.200 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2018-11-14T23:38:50.345Z,1542238730.345 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2018-11-14T23:38:50.345Z,1542238730.345 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2018-11-14T23:38:50.426Z,1542238730.426 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2018-11-14T23:38:50.645Z,1542238730.645 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2018-11-14T23:38:50.646Z,1542238730.646 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2018-11-14T23:38:50.746Z,1542238730.746 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2018-11-14T23:38:50.747Z,1542238730.747 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2018-11-14T23:38:50.843Z,1542238730.843 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2018-11-14T23:38:50.844Z,1542238730.844 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2018-11-14T23:38:50.994Z,1542238730.994 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2018-11-14T23:38:50.994Z,1542238730.994 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2018-11-14T23:38:51.311Z,1542238731.311 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2018-11-14T23:38:51.313Z,1542238731.313 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-whoidhs/
2018-11-14T23:38:51.314Z,1542238731.314 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Science.cfg
2018-11-14T23:38:51.447Z,1542238731.447 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Battery.cfg
2018-11-14T23:38:51.672Z,1542238731.672 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2018-11-14T23:38:51.672Z,1542238731.672 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Sensor.cfg
2018-11-14T23:38:51.853Z,1542238731.853 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Control.cfg
2018-11-14T23:38:51.957Z,1542238731.957 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/BIT.cfg
2018-11-14T23:38:52.058Z,1542238732.058 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/vehicle.cfg
2018-11-14T23:38:52.262Z,1542238732.262 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Simulator.cfg
2018-11-14T23:38:52.348Z,1542238732.348 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/logger.cfg
2018-11-14T23:38:52.450Z,1542238732.450 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Navigation.cfg
2018-11-14T23:38:52.545Z,1542238732.545 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/secure.cfg
2018-11-14T23:38:52.630Z,1542238732.630 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Servo.cfg
2018-11-14T23:38:52.743Z,1542238732.743 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-whoidhs/root/
2018-11-14T23:38:52.743Z,1542238732.743 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2018-11-14T23:38:52.745Z,1542238732.745 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2018-11-14T23:38:52.875Z,1542238732.875 [SBIT](DEBUG): Construct Startup Built In Test.
2018-11-14T23:38:52.905Z,1542238732.905 [SBIT] Loaded
2018-11-14T23:38:52.905Z,1542238732.905 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2018-11-14T23:38:52.906Z,1542238732.906 [IBIT](DEBUG): Construct Initiated Built In Test.
2018-11-14T23:38:52.933Z,1542238732.933 [IBIT] Loaded
2018-11-14T23:38:52.933Z,1542238732.933 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2018-11-14T23:38:52.936Z,1542238732.936 [CBIT](DEBUG): Construct Continuous Built In Test.
2018-11-14T23:38:53.090Z,1542238733.090 [CBIT] Loaded
2018-11-14T23:38:53.090Z,1542238733.090 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2018-11-14T23:38:53.090Z,1542238733.090 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2018-11-14T23:38:53.091Z,1542238733.091 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2018-11-14T23:38:53.446Z,1542238733.446 [BuoyancyServo] Loaded
2018-11-14T23:38:53.446Z,1542238733.446 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2018-11-14T23:38:53.472Z,1542238733.472 [ElevatorServo] Loaded
2018-11-14T23:38:53.472Z,1542238733.472 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2018-11-14T23:38:53.487Z,1542238733.487 [MassServo] Loaded
2018-11-14T23:38:53.487Z,1542238733.487 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2018-11-14T23:38:53.502Z,1542238733.502 [RudderServo] Loaded
2018-11-14T23:38:53.502Z,1542238733.502 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2018-11-14T23:38:53.580Z,1542238733.580 [ThrusterServo] Loaded
2018-11-14T23:38:53.580Z,1542238733.580 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2018-11-14T23:38:53.580Z,1542238733.580 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2018-11-14T23:38:53.581Z,1542238733.581 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2018-11-14T23:38:53.809Z,1542238733.809 [DeadReckonUsingMultipleVelocitySources] Loaded
2018-11-14T23:38:53.810Z,1542238733.810 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2018-11-14T23:38:53.867Z,1542238733.867 [DeadReckonUsingSpeedCalculator] Loaded
2018-11-14T23:38:53.867Z,1542238733.867 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2018-11-14T23:38:53.884Z,1542238733.884 [NavChart] Loaded
2018-11-14T23:38:53.884Z,1542238733.884 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2018-11-14T23:38:53.888Z,1542238733.888 [UniversalFixResidualReporter] Loaded
2018-11-14T23:38:53.888Z,1542238733.888 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2018-11-14T23:38:53.889Z,1542238733.889 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2018-11-14T23:38:53.889Z,1542238733.889 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2018-11-14T23:38:54.073Z,1542238734.073 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2018-11-14T23:38:54.074Z,1542238734.074 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2018-11-14T23:38:54.317Z,1542238734.317 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2018-11-14T23:38:54.318Z,1542238734.318 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2018-11-14T23:38:54.619Z,1542238734.619 [AHRS_M2] Loaded
2018-11-14T23:38:54.619Z,1542238734.619 [ComponentRegistry](DEBUG): SyncComponent "AHRS_M2" handled in the control thread.
2018-11-14T23:38:54.690Z,1542238734.690 [DataOverHttps] Loaded
2018-11-14T23:38:54.690Z,1542238734.690 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2018-11-14T23:38:54.703Z,1542238734.703 [Depth_Keller] Loaded
2018-11-14T23:38:54.703Z,1542238734.703 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2018-11-14T23:38:54.708Z,1542238734.708 [DropWeight] Loaded
2018-11-14T23:38:54.708Z,1542238734.708 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2018-11-14T23:38:54.798Z,1542238734.798 [NAL9602] Loaded
2018-11-14T23:38:54.798Z,1542238734.798 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2018-11-14T23:38:54.803Z,1542238734.803 [Onboard] Loaded
2018-11-14T23:38:54.803Z,1542238734.803 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2018-11-14T23:38:54.811Z,1542238734.811 [Radio_Surface] Loaded
2018-11-14T23:38:54.811Z,1542238734.811 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2018-11-14T23:38:54.812Z,1542238734.812 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 408364E0
2018-11-14T23:38:54.813Z,1542238734.813 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 1555
2018-11-14T23:38:54.841Z,1542238734.841 [RDI_Pathfinder] Loaded
2018-11-14T23:38:54.841Z,1542238734.841 [ComponentRegistry](DEBUG): SyncComponent "RDI_Pathfinder" handled in the control thread.
2018-11-14T23:38:54.863Z,1542238734.863 [RDI_PathfinderUp] Loaded
2018-11-14T23:38:54.864Z,1542238734.864 [ComponentRegistry](DEBUG): SyncComponent "RDI_PathfinderUp" handled in the control thread.
2018-11-14T23:38:54.870Z,1542238734.870 [SCPI] Loaded
2018-11-14T23:38:54.870Z,1542238734.870 [ComponentRegistry](DEBUG): SyncComponent "SCPI" handled in the control thread.
2018-11-14T23:38:56.639Z,1542238736.639 [BPC1] Loaded
2018-11-14T23:38:56.639Z,1542238736.639 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2018-11-14T23:38:56.640Z,1542238736.640 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2018-11-14T23:38:56.640Z,1542238736.640 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2018-11-14T23:38:56.710Z,1542238736.710 [VerticalControl](DEBUG): Construct VerticalControl.
2018-11-14T23:38:56.797Z,1542238736.797 [VerticalControl] Loaded
2018-11-14T23:38:56.797Z,1542238736.797 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2018-11-14T23:38:56.798Z,1542238736.798 [HorizontalControl](DEBUG): Construct HorizontalControl.
2018-11-14T23:38:56.857Z,1542238736.857 [HorizontalControl] Loaded
2018-11-14T23:38:56.857Z,1542238736.857 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2018-11-14T23:38:56.858Z,1542238736.858 [SpeedControl](DEBUG): Construct SpeedControl.
2018-11-14T23:38:56.860Z,1542238736.860 [SpeedControl] Loaded
2018-11-14T23:38:56.860Z,1542238736.860 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2018-11-14T23:38:56.861Z,1542238736.861 [LoopControl](DEBUG): Construct LoopControl.
2018-11-14T23:38:56.861Z,1542238736.861 [LoopControl] Loaded
2018-11-14T23:38:56.862Z,1542238736.862 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2018-11-14T23:38:56.862Z,1542238736.862 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2018-11-14T23:38:56.863Z,1542238736.863 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2018-11-14T23:38:56.962Z,1542238736.962 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2018-11-14T23:38:56.963Z,1542238736.963 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2018-11-14T23:38:57.121Z,1542238737.121 [Aanderaa_O2] Loaded
2018-11-14T23:38:57.121Z,1542238737.121 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2018-11-14T23:38:57.205Z,1542238737.205 [CTD_NeilBrown] Loaded
2018-11-14T23:38:57.206Z,1542238737.206 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2018-11-14T23:38:57.207Z,1542238737.207 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 409374E0
2018-11-14T23:38:57.207Z,1542238737.207 [CTD_NeilBrown ThreadHandler](INFO): Protected caller Thread ID is 1556
2018-11-14T23:38:57.252Z,1542238737.252 [WetLabsSeaOWL_UV_A] Loaded
2018-11-14T23:38:57.252Z,1542238737.252 [ComponentRegistry](DEBUG): Component "WetLabsSeaOWL_UV_A" handled in its own thread.
2018-11-14T23:38:57.253Z,1542238737.253 [WetLabsSeaOWL_UV_A ThreadHandler](DEBUG): Created PCaller Thread at 409674E0
2018-11-14T23:38:57.254Z,1542238737.254 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Protected caller Thread ID is 1557
2018-11-14T23:38:57.254Z,1542238737.254 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2018-11-14T23:38:57.255Z,1542238737.255 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2018-11-14T23:38:57.319Z,1542238737.319 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2018-11-14T23:38:57.319Z,1542238737.319 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2018-11-14T23:38:57.361Z,1542238737.361 [DepthRateCalculator] Loaded
2018-11-14T23:38:57.361Z,1542238737.361 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2018-11-14T23:38:57.366Z,1542238737.366 [PitchRateCalculator] Loaded
2018-11-14T23:38:57.367Z,1542238737.367 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2018-11-14T23:38:57.378Z,1542238737.378 [SpeedCalculator] Loaded
2018-11-14T23:38:57.379Z,1542238737.379 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2018-11-14T23:38:57.400Z,1542238737.400 [TempGradientCalculator] Loaded
2018-11-14T23:38:57.400Z,1542238737.400 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2018-11-14T23:38:57.405Z,1542238737.405 [YawRateCalculator] Loaded
2018-11-14T23:38:57.405Z,1542238737.405 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2018-11-14T23:38:57.435Z,1542238737.435 [ElevatorOffsetCalculator] Loaded
2018-11-14T23:38:57.436Z,1542238737.436 [ComponentRegistry](DEBUG): SyncComponent "ElevatorOffsetCalculator" handled in the control thread.
2018-11-14T23:38:57.436Z,1542238737.436 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2018-11-14T23:38:57.437Z,1542238737.437 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2018-11-14T23:38:57.462Z,1542238737.462 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2018-11-14T23:38:57.465Z,1542238737.465 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2018-11-14T23:38:57.466Z,1542238737.466 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2018-11-14T23:38:57.473Z,1542238737.473 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2018-11-14T23:38:57.474Z,1542238737.474 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A174E0
2018-11-14T23:38:57.474Z,1542238737.474 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 1558
2018-11-14T23:38:57.479Z,1542238737.479 [Supervisor](INFO): Main Thread ID is 797
2018-11-14T23:38:57.479Z,1542238737.479 [Supervisor](DEBUG): Running supervisor.
2018-11-14T23:38:57.480Z,1542238737.480 [CommandLine ThreadHandler](INFO): Handler Thread ID is 1559
2018-11-14T23:38:57.482Z,1542238737.482 [controlThread ThreadHandler](INFO): Handler Thread ID is 1560
2018-11-14T23:38:57.482Z,1542238737.482 [controlThread](DEBUG): Initializing ControlThread
2018-11-14T23:38:57.483Z,1542238737.483 [SBIT](INFO): Initialize SBIT Component.
2018-11-14T23:38:57.484Z,1542238737.484 [SBIT](IMPORTANT): git: 2018-11-05-2-g6a71760
2018-11-14T23:38:57.484Z,1542238737.484 [SBIT](INFO): git hash: 6a71760e9f7f683776be04bba2e56bc8c8a5e6e9
2018-11-14T23:38:57.484Z,1542238737.484 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-11-14T23:38:57.485Z,1542238737.485 [SBIT](IMPORTANT): Kernel Version:#2 PREEMPT Thu Jan 11 20:13:48 PST 2018
2018-11-14T23:38:57.486Z,1542238737.486 [SBIT](INFO): Beginning SBIT in 28.000000 seconds.
2018-11-14T23:38:57.486Z,1542238737.486 [IBIT](INFO): Initialize IBIT Component.
2018-11-14T23:38:57.487Z,1542238737.487 [CBIT](DEBUG): Initialize CBIT Component.
2018-11-14T23:38:57.487Z,1542238737.487 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2018-11-14T23:38:57.488Z,1542238737.488 [logger ThreadHandler](INFO): Handler Thread ID is 1561
2018-11-14T23:38:57.505Z,1542238737.505 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 1562
2018-11-14T23:38:57.511Z,1542238737.511 [Radio_Surface](INFO): Powering up
2018-11-14T23:38:57.517Z,1542238737.517 [CTD_NeilBrown ThreadHandler](INFO): Handler Thread ID is 1563
2018-11-14T23:38:57.518Z,1542238737.518 [CTD_NeilBrown](INFO): Powering down
2018-11-14T23:38:57.549Z,1542238737.549 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Handler Thread ID is 1564
2018-11-14T23:38:57.550Z,1542238737.550 [WetLabsSeaOWL_UV_A](INFO): Powering down
2018-11-14T23:38:57.581Z,1542238737.581 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 1565
2018-11-14T23:38:57.584Z,1542238737.584 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2018-11-14T23:38:57.585Z,1542238737.585 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2018-11-14T23:38:57.585Z,1542238737.585 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2018-11-14T23:38:57.585Z,1542238737.585 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2018-11-14T23:38:57.585Z,1542238737.585 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2018-11-14T23:38:57.585Z,1542238737.585 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2018-11-14T23:38:57.586Z,1542238737.586 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2018-11-14T23:38:57.586Z,1542238737.586 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2018-11-14T23:38:57.586Z,1542238737.586 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2018-11-14T23:38:57.586Z,1542238737.586 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2018-11-14T23:38:57.586Z,1542238737.586 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2018-11-14T23:38:57.587Z,1542238737.587 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2018-11-14T23:38:57.587Z,1542238737.587 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2018-11-14T23:38:57.587Z,1542238737.587 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2018-11-14T23:38:57.587Z,1542238737.587 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2018-11-14T23:38:57.587Z,1542238737.587 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2018-11-14T23:38:57.594Z,1542238737.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-14T23:38:57.595Z,1542238737.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:38:57.595Z,1542238737.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:38:57.596Z,1542238737.596 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-14T23:38:57.596Z,1542238737.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:38:57.596Z,1542238737.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:38:57.597Z,1542238737.597 [NavChart](DEBUG): Initialize NavChart Navigation.
2018-11-14T23:38:57.597Z,1542238737.597 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2018-11-14T23:38:57.604Z,1542238737.604 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2018-11-14T23:38:57.610Z,1542238737.610 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2018-11-14T23:38:57.611Z,1542238737.611 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2018-11-14T23:38:57.611Z,1542238737.611 [LoopControl](DEBUG): Initialize LoopControlComponent.
2018-11-14T23:38:57.612Z,1542238737.612 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-11-14T23:38:57.612Z,1542238737.612 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2018-11-14T23:38:57.612Z,1542238737.612 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2018-11-14T23:38:57.617Z,1542238737.617 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2018-11-14T23:38:57.618Z,1542238737.618 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2018-11-14T23:38:57.618Z,1542238737.618 [ElevatorOffsetCalculator](DEBUG): Initializing ElevatorOffsetCalculator.
2018-11-14T23:38:57.619Z,1542238737.619 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2018-11-14T23:38:57.651Z,1542238737.651 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2018-11-14T23:38:57.670Z,1542238737.670 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2018-11-14T23:38:57.671Z,1542238737.671 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2018-11-14T23:38:57.773Z,1542238737.773 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2018-11-14T23:38:57.774Z,1542238737.774 [Default:A.Wait](DEBUG): Construct Wait.
2018-11-14T23:38:57.776Z,1542238737.776 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-11-14T23:38:57.803Z,1542238737.803 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2018-11-14T23:38:57.822Z,1542238737.822 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2018-11-14T23:38:57.827Z,1542238737.827 [Default:E.Execute](DEBUG): Construct Execute.
2018-11-14T23:38:57.847Z,1542238737.847 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xmlns="Tethys"
         xmlns:Units="Tethys/Units"
         xmlns:Guidance="Tethys/Guidance"
         xmlns:Universal="Tethys/Universal"
         xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                             Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                             Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                             Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
         Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Sequence/>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn on</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2018-11-14T23:38:57.852Z,1542238737.852 [controlThread](DEBUG): Component order: CycleStarter,AHRS_M2,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,RDI_Pathfinder,RDI_PathfinderUp,SCPI,BPC1,Aanderaa_O2,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,YawRateCalculator,ElevatorOffsetCalculator,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-11-14T23:38:57.877Z,1542238737.877 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-14T23:38:57.933Z,1542238737.933 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2018-11-14T23:38:57.941Z,1542238737.941 [Depth_Keller](ERROR): Pressure reading out of range: 1913.424561 decibar
2018-11-14T23:38:58.193Z,1542238738.193 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-11-14T23:38:58.409Z,1542238738.409 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-11-14T23:38:58.417Z,1542238738.417 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-11-14T23:38:58.439Z,1542238738.439 [ElevatorServo](DEBUG): Initializing EZServoServo.
2018-11-14T23:38:58.445Z,1542238738.445 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2018-11-14T23:38:58.467Z,1542238738.467 [MassServo](DEBUG): Initializing EZServoServo.
2018-11-14T23:38:58.473Z,1542238738.473 [MassServo](DEBUG): Initializing MassServo.
2018-11-14T23:38:58.479Z,1542238738.479 [RudderServo](DEBUG): Initializing EZServoServo.
2018-11-14T23:38:58.485Z,1542238738.485 [RudderServo](DEBUG): Initializing RudderServo.
2018-11-14T23:38:58.514Z,1542238738.514 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-11-14T23:38:58.521Z,1542238738.521 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-11-14T23:38:58.677Z,1542238738.677 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-11-14T23:38:58.678Z,1542238738.678 [DropWeight] Hardware Fault, FailCount= 1
2018-11-14T23:38:58.678Z,1542238738.678 [DropWeight](ERROR): Hardware Fault
2018-11-14T23:38:58.781Z,1542238738.781 [RDI_PathfinderUp](INFO): Powering down
2018-11-14T23:38:58.848Z,1542238738.848 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-11-14T23:38:58.889Z,1542238738.889 [CommandLine](FAULT): Scheduling is paused
2018-11-14T23:38:58.889Z,1542238738.889 [CBIT](INFO): Critical error at 20181114T233858
2018-11-14T23:38:58.889Z,1542238738.889 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2018-11-14T23:38:58.892Z,1542238738.892 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-11-14T23:38:58.892Z,1542238738.892 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-11-14T23:38:59.017Z,1542238739.017 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-11-14T23:38:59.349Z,1542238739.349 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2018-11-14T23:38:59.349Z,1542238739.349 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2018-11-14T23:38:59.349Z,1542238739.349 [BuoyancyServo] Communications Fault, FailCount= 1
2018-11-14T23:38:59.349Z,1542238739.349 [BuoyancyServo](ERROR): Communications Fault
2018-11-14T23:38:59.555Z,1542238739.555 [CBIT](INFO): Critical error at 20181114T233858
2018-11-14T23:38:59.557Z,1542238739.557 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2018-11-14T23:39:01.493Z,1542238741.493 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:01.913Z,1542238741.913 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:01.994Z,1542238741.994 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2018-11-14T23:39:01.994Z,1542238741.994 [BuoyancyServo] No Fault, FailCount= 1
2018-11-14T23:39:02.333Z,1542238742.333 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:02.383Z,1542238742.383 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-11-14T23:39:02.502Z,1542238742.502 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-11-14T23:39:02.957Z,1542238742.957 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:03.565Z,1542238743.565 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:04.217Z,1542238744.217 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:04.625Z,1542238744.625 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:05.097Z,1542238745.097 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:05.517Z,1542238745.517 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:05.977Z,1542238745.977 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:06.401Z,1542238746.401 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:06.881Z,1542238746.881 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:07.333Z,1542238747.333 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:07.757Z,1542238747.757 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:07.854Z,1542238747.854 [CBIT](CRITICAL): Environmental Failure. Press:14.852731 PSI. Humidity:31%. Temp:25 C. ABORTING MISSION
2018-11-14T23:39:08.185Z,1542238748.185 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:08.185Z,1542238748.185 [AHRS_M2](FAULT): Failed to initialize within timeout.
2018-11-14T23:39:08.185Z,1542238748.185 [AHRS_M2] Communications Fault, FailCount= 1
2018-11-14T23:39:08.185Z,1542238748.185 [AHRS_M2](ERROR): Communications Fault
2018-11-14T23:39:08.212Z,1542238748.212 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:39:08.212Z,1542238748.212 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-14T23:39:08.212Z,1542238748.212 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:39:08.380Z,1542238748.380 [CBIT](INFO): Critical error at 20181114T233907
2018-11-14T23:39:08.382Z,1542238748.382 [CBIT](ERROR): Communications Fault in component: AHRS_M2
2018-11-14T23:39:08.382Z,1542238748.382 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:39:08.390Z,1542238748.390 [AHRS_M2](INFO): Powering down
2018-11-14T23:39:08.657Z,1542238748.657 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:39:09.410Z,1542238749.410 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:39:09.410Z,1542238749.410 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-14T23:39:11.380Z,1542238751.380 [RDI_Pathfinder](ERROR): Failed to parse:Pathfinder
2018-11-14T23:39:12.230Z,1542238752.230 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-14T23:39:12.230Z,1542238752.230 [AHRS_M2] No Fault, FailCount= 1
2018-11-14T23:39:12.549Z,1542238752.549 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-14T23:39:16.073Z,1542238756.073 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:16.481Z,1542238756.481 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:16.921Z,1542238756.921 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:17.381Z,1542238757.381 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:17.797Z,1542238757.797 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:18.205Z,1542238758.205 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:18.621Z,1542238758.621 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:19.037Z,1542238759.037 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:19.449Z,1542238759.449 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:19.857Z,1542238759.857 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:19.888Z,1542238759.888 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:39:19.888Z,1542238759.888 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-14T23:39:19.888Z,1542238759.888 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:39:19.928Z,1542238759.928 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:39:20.277Z,1542238760.277 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:20.417Z,1542238760.417 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:39:20.777Z,1542238760.777 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:21.249Z,1542238761.249 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:21.341Z,1542238761.341 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:39:21.341Z,1542238761.341 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-14T23:39:21.685Z,1542238761.685 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:22.125Z,1542238762.125 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:22.561Z,1542238762.561 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:22.561Z,1542238762.561 [AHRS_M2](FAULT): Failed to initialize within timeout.
2018-11-14T23:39:22.561Z,1542238762.561 [AHRS_M2] Communications Fault, FailCount= 2
2018-11-14T23:39:22.561Z,1542238762.561 [AHRS_M2](ERROR): Communications Fault
2018-11-14T23:39:22.660Z,1542238762.660 [CBIT](ERROR): Communications Fault in component: AHRS_M2
2018-11-14T23:39:22.683Z,1542238762.683 [AHRS_M2](INFO): Powering down
2018-11-14T23:39:25.082Z,1542238765.082 [NAL9602](INFO): Powering up NAL9602
2018-11-14T23:39:25.930Z,1542238765.930 [SBIT](IMPORTANT): Beginning Startup BIT
2018-11-14T23:39:25.942Z,1542238765.942 [CBIT](IMPORTANT): Beginning ground fault scan
2018-11-14T23:39:26.411Z,1542238766.411 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-14T23:39:26.411Z,1542238766.411 [AHRS_M2] No Fault, FailCount= 2
2018-11-14T23:39:26.678Z,1542238766.678 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-14T23:39:30.457Z,1542238770.457 [AHRS_M2](ERROR): Read RFS packet UART error: serial timeout
2018-11-14T23:39:32.053Z,1542238772.053 [AHRS_M2](ERROR): Read RFS packet UART error: serial timeout
2018-11-14T23:39:32.100Z,1542238772.100 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:39:32.100Z,1542238772.100 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-14T23:39:32.100Z,1542238772.100 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:39:32.213Z,1542238772.213 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:39:32.213Z,1542238772.213 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-14T23:39:32.553Z,1542238772.553 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:39:35.998Z,1542238775.998 [NAL9602](INFO): NAL9602 initialized
2018-11-14T23:39:36.898Z,1542238776.898 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): -0.019085
CHAN A1 (24V): 0.172616
CHAN A2 (12V): -0.007397
CHAN A3 (5V): -0.001809
CHAN B0 (3.3V): -0.000019
CHAN B1 (3.15aV): 0.000013
CHAN B2 (3.15bV): 0.000127
CHAN B3 (GND): 0.002292
OPEN: 0.004949
Full Scale Calc: 4.765 mA, -1.589 mA
2018-11-14T23:39:37.662Z,1542238777.662 [RDI_Pathfinder](ERROR): only read 1 of 5 data items
2018-11-14T23:39:37.662Z,1542238777.662 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-38,V
2018-11-14T23:39:40.393Z,1542238780.393 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-14T23:39:40.393Z,1542238780.393 [AHRS_M2] Data Fault, FailCount= 3
2018-11-14T23:39:40.393Z,1542238780.393 [AHRS_M2](ERROR): Data Fault
2018-11-14T23:39:40.498Z,1542238780.498 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-14T23:39:40.782Z,1542238780.782 [AHRS_M2](INFO): Powering down
2018-11-14T23:39:44.762Z,1542238784.762 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-14T23:39:44.762Z,1542238784.762 [AHRS_M2] No Fault, FailCount= 3
2018-11-14T23:39:44.994Z,1542238784.994 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-14T23:39:48.517Z,1542238788.517 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:49.025Z,1542238789.025 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:49.485Z,1542238789.485 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:49.949Z,1542238789.949 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:50.449Z,1542238790.449 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:50.937Z,1542238790.937 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:51.389Z,1542238791.389 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:51.861Z,1542238791.861 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:52.285Z,1542238792.285 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:52.745Z,1542238792.745 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:53.197Z,1542238793.197 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:53.645Z,1542238793.645 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:54.109Z,1542238794.109 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:54.597Z,1542238794.597 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:55.069Z,1542238795.069 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:39:55.069Z,1542238795.069 [AHRS_M2](FAULT): Failed to initialize within timeout.
2018-11-14T23:39:55.069Z,1542238795.069 [AHRS_M2] Communications Fault, FailCount= 4
2018-11-14T23:39:55.069Z,1542238795.069 [AHRS_M2](ERROR): Communications Fault
2018-11-14T23:39:55.211Z,1542238795.211 [CBIT](ERROR): Communications Fault in component: AHRS_M2
2018-11-14T23:39:55.217Z,1542238795.217 [AHRS_M2](INFO): Powering down
2018-11-14T23:39:58.931Z,1542238798.931 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-14T23:39:58.931Z,1542238798.931 [AHRS_M2] No Fault, FailCount= 4
2018-11-14T23:39:59.222Z,1542238799.222 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-14T23:40:02.745Z,1542238802.745 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:03.169Z,1542238803.169 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:03.605Z,1542238803.605 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:04.017Z,1542238804.017 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:04.425Z,1542238804.425 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:04.865Z,1542238804.865 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:05.285Z,1542238805.285 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:05.733Z,1542238805.733 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:06.141Z,1542238806.141 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:06.597Z,1542238806.597 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:07.049Z,1542238807.049 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:07.453Z,1542238807.453 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:07.869Z,1542238807.869 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:08.433Z,1542238808.433 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:09.273Z,1542238809.273 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:09.273Z,1542238809.273 [AHRS_M2](FAULT): Failed to initialize within timeout.
2018-11-14T23:40:09.273Z,1542238809.273 [AHRS_M2] Communications Fault, FailCount= 5
2018-11-14T23:40:09.273Z,1542238809.273 [AHRS_M2](ERROR): Communications Fault
2018-11-14T23:40:09.463Z,1542238809.463 [CBIT](ERROR): Communications Fault in component: AHRS_M2
2018-11-14T23:40:09.463Z,1542238809.463 [CBIT](CRITICAL): Communications Fault in component: AHRS_M2
2018-11-14T23:40:09.470Z,1542238809.470 [AHRS_M2](INFO): Powering down
2018-11-14T23:40:09.724Z,1542238809.724 [CBIT](INFO): Critical error at 20181114T234009
2018-11-14T23:40:19.967Z,1542238819.967 [SBIT](IMPORTANT): SBIT PASSED
2018-11-14T23:40:20.017Z,1542238820.017 [CommandLine](IMPORTANT): got command configSet list
2018-11-14T23:40:20.017Z,1542238820.017 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2018-11-14T23:40:20.018Z,1542238820.018 [CommandLine](IMPORTANT): 

2018-11-14T23:40:20.323Z,1542238820.323 [MissionManager](IMPORTANT): Started mission Startup
2018-11-14T23:40:20.323Z,1542238820.323 [Startup] Running Loop=1
2018-11-14T23:40:20.324Z,1542238820.324 [Startup](DEBUG): Aggregate::initialize Startup
2018-11-14T23:40:20.324Z,1542238820.324 [Startup:A.GoToSurface] Running Loop=1
2018-11-14T23:40:20.324Z,1542238820.324 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-11-14T23:40:20.325Z,1542238820.325 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-11-14T23:40:20.325Z,1542238820.325 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-11-14T23:40:20.326Z,1542238820.326 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-11-14T23:40:20.326Z,1542238820.326 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-11-14T23:40:20.326Z,1542238820.326 [Startup:A.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-11-14T23:40:20.332Z,1542238820.332 [Startup:StartupSatComms] Running Loop=1
2018-11-14T23:40:20.349Z,1542238820.349 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2018-11-14T23:40:20.349Z,1542238820.349 [Startup:StartupSatComms:A] Running Loop=1
2018-11-14T23:40:20.731Z,1542238820.731 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2018-11-14T23:40:27.264Z,1542238827.264 [CommandLine](IMPORTANT): got command failComponent
2018-11-14T23:40:27.265Z,1542238827.265 [CommandLine](IMPORTANT): Failed components:
2018-11-14T23:40:27.265Z,1542238827.265 [CommandLine](IMPORTANT): AHRS_M2: Communications Fault
2018-11-14T23:40:27.265Z,1542238827.265 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2018-11-14T23:40:27.265Z,1542238827.265 [CommandLine](IMPORTANT): Aanderaa_O2: Communications Fault
2018-11-14T23:40:35.191Z,1542238835.191 [CommandLine](IMPORTANT): got command failComponent none AHRS_M2
2018-11-14T23:40:35.191Z,1542238835.191 [AHRS_M2] No Fault, FailCount= 5
2018-11-14T23:40:35.192Z,1542238835.192 [CommandLine](IMPORTANT): AHRS_M2 failureMode is No Fault
2018-11-14T23:40:35.474Z,1542238835.474 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-14T23:40:38.986Z,1542238838.986 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:39.409Z,1542238839.409 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:39.809Z,1542238839.809 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:40.209Z,1542238840.209 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:40.633Z,1542238840.633 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:41.065Z,1542238841.065 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:41.481Z,1542238841.481 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:41.929Z,1542238841.929 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:42.329Z,1542238842.329 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:42.749Z,1542238842.749 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:43.149Z,1542238843.149 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:43.577Z,1542238843.577 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:43.965Z,1542238843.965 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:44.377Z,1542238844.377 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:44.793Z,1542238844.793 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:45.289Z,1542238845.289 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:45.773Z,1542238845.773 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-14T23:40:45.773Z,1542238845.773 [AHRS_M2](FAULT): Failed to initialize within timeout.
2018-11-14T23:40:45.773Z,1542238845.773 [AHRS_M2] Communications Fault, FailCount= 6
2018-11-14T23:40:45.773Z,1542238845.773 [AHRS_M2](ERROR): Communications Fault
2018-11-14T23:40:45.874Z,1542238845.874 [CBIT](ERROR): Communications Fault in component: AHRS_M2
2018-11-14T23:40:45.874Z,1542238845.874 [CBIT](CRITICAL): Communications Fault in component: AHRS_M2
2018-11-14T23:40:45.889Z,1542238845.889 [AHRS_M2](INFO): Powering down
2018-11-14T23:40:46.055Z,1542238846.055 [CBIT](INFO): Critical error at 20181114T234045
2018-11-14T23:40:57.598Z,1542238857.598 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-14T23:40:57.598Z,1542238857.598 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-11-14T23:40:57.598Z,1542238857.598 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-14T23:40:57.600Z,1542238857.600 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-14T23:40:57.600Z,1542238857.600 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-11-14T23:40:57.600Z,1542238857.600 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-14T23:40:57.613Z,1542238857.613 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-14T23:40:57.613Z,1542238857.613 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-14T23:40:57.937Z,1542238857.937 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-14T23:40:57.937Z,1542238857.937 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-11-14T23:40:57.938Z,1542238857.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-14T23:40:57.938Z,1542238857.938 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-11-14T23:40:58.406Z,1542238858.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-14T23:40:58.407Z,1542238858.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:40:58.407Z,1542238858.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:40:58.407Z,1542238858.407 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-14T23:40:58.408Z,1542238858.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:40:58.408Z,1542238858.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:41:22.348Z,1542238882.348 [Startup:StartupSatComms:A](INFO): Timed out from 2018-11-14T23:40:20.3Z
2018-11-14T23:41:22.348Z,1542238882.348 [Startup:StartupSatComms:A] Stopped
2018-11-14T23:41:22.348Z,1542238882.348 [Startup:StartupSatComms:B] Running Loop=1
2018-11-14T23:41:22.460Z,1542238882.460 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-11-14T23:41:23.180Z,1542238883.180 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.010395
2018-11-14T23:41:27.310Z,1542238887.310 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T183421/Courier0091.lzma
2018-11-14T23:41:28.111Z,1542238888.111 [DataOverHttps](INFO): Moved sent file to Logs/20181114T183421/Courier0091.lzma.bak
2018-11-14T23:41:28.111Z,1542238888.111 [DataOverHttps](INFO): SBD MOMSN=8876237
2018-11-14T23:41:36.991Z,1542238896.991 [DataOverHttps](INFO): Sending 249 bytes from file Logs/20181114T233847/Courier0000.lzma
2018-11-14T23:41:37.779Z,1542238897.779 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0000.lzma.bak
2018-11-14T23:41:37.779Z,1542238897.779 [DataOverHttps](INFO): SBD MOMSN=8876239
2018-11-14T23:41:46.804Z,1542238906.804 [DataOverHttps](INFO): Sending 272 bytes from file Logs/20181114T183421/Express0092.lzma
2018-11-14T23:41:47.603Z,1542238907.603 [DataOverHttps](INFO): Moved sent file to Logs/20181114T183421/Express0092.lzma.bak
2018-11-14T23:41:47.603Z,1542238907.603 [DataOverHttps](INFO): SBD MOMSN=8876247
2018-11-14T23:41:56.990Z,1542238916.990 [DataOverHttps](INFO): Sending 1044 bytes from file Logs/20181114T233847/Express0001.lzma
2018-11-14T23:41:57.787Z,1542238917.787 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0001.lzma.bak
2018-11-14T23:41:57.787Z,1542238917.787 [DataOverHttps](INFO): SBD MOMSN=8876260
2018-11-14T23:41:58.619Z,1542238918.619 [Startup:StartupSatComms:B] Stopped
2018-11-14T23:41:58.619Z,1542238918.619 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2018-11-14T23:41:58.619Z,1542238918.619 [Startup:StartupSatComms] Stopped
2018-11-14T23:41:58.620Z,1542238918.620 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2018-11-14T23:41:58.620Z,1542238918.620 [Startup](INFO): Completed Startup
2018-11-14T23:41:58.637Z,1542238918.637 [MissionManager](INFO): Startup is completed.
2018-11-14T23:41:58.637Z,1542238918.637 [MissionManager](INFO): Uninitializing Mission Startup
2018-11-14T23:41:58.637Z,1542238918.637 [Startup] Stopped
2018-11-14T23:41:58.637Z,1542238918.637 [Startup](DEBUG): Aggregate::uninitialize Startup
2018-11-14T23:41:58.637Z,1542238918.637 [Startup:A.GoToSurface] Stopped
2018-11-14T23:41:58.637Z,1542238918.637 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-11-14T23:41:58.727Z,1542238918.727 [MissionManager](IMPORTANT): Started mission Default
2018-11-14T23:41:58.727Z,1542238918.727 [Default] Running Loop=1
2018-11-14T23:41:58.727Z,1542238918.727 [Default](DEBUG): Aggregate::initialize Default
2018-11-14T23:41:58.728Z,1542238918.728 [Default:B.GoToSurface] Running Loop=1
2018-11-14T23:41:58.728Z,1542238918.728 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-11-14T23:41:58.728Z,1542238918.728 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-11-14T23:41:58.728Z,1542238918.728 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-11-14T23:41:58.733Z,1542238918.733 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-11-14T23:41:58.733Z,1542238918.733 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-11-14T23:41:58.734Z,1542238918.734 [Default:B.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-11-14T23:41:58.734Z,1542238918.734 [Default:A.Wait] Running Loop=1
2018-11-14T23:41:58.734Z,1542238918.734 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-11-14T23:42:02.420Z,1542238922.420 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:42:02.421Z,1542238922.421 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-14T23:42:12.000Z,1542238932.000 [Default:A.Wait](INFO): Done Waiting.
2018-11-14T23:42:12.000Z,1542238932.000 [Default:A.Wait] Stopped
2018-11-14T23:42:12.000Z,1542238932.000 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-11-14T23:42:12.421Z,1542238932.421 [Default:CheckIn] Running Loop=1
2018-11-14T23:42:12.421Z,1542238932.421 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-14T23:42:12.421Z,1542238932.421 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-14T23:42:12.780Z,1542238932.780 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-11-14T23:42:13.231Z,1542238933.231 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:42:13.231Z,1542238933.231 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-14T23:42:13.231Z,1542238933.231 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:42:13.305Z,1542238933.305 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:42:13.681Z,1542238933.681 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:42:14.404Z,1542238934.404 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:42:14.404Z,1542238934.404 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-14T23:42:25.179Z,1542238945.179 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:42:25.179Z,1542238945.179 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-14T23:42:25.179Z,1542238945.179 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:42:25.231Z,1542238945.231 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:42:25.685Z,1542238945.685 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:42:26.405Z,1542238946.405 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:42:26.405Z,1542238946.405 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-14T23:42:33.567Z,1542238953.567 [RDI_Pathfinder](ERROR): only read 2 of 5 data items
2018-11-14T23:42:33.568Z,1542238953.568 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768-32768,V
2018-11-14T23:42:38.161Z,1542238958.161 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:42:38.161Z,1542238958.161 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-14T23:42:38.161Z,1542238958.161 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:42:38.178Z,1542238958.178 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:42:38.179Z,1542238958.179 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-14T23:42:38.433Z,1542238958.433 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:42:58.635Z,1542238978.635 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-14T23:42:58.635Z,1542238978.635 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-11-14T23:42:58.636Z,1542238978.636 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-14T23:42:58.637Z,1542238978.637 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-14T23:42:58.637Z,1542238978.637 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-11-14T23:42:58.638Z,1542238978.638 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-14T23:42:58.662Z,1542238978.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-14T23:42:58.662Z,1542238978.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-14T23:42:59.044Z,1542238979.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-14T23:42:59.044Z,1542238979.044 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-11-14T23:42:59.044Z,1542238979.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-14T23:42:59.045Z,1542238979.045 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-11-14T23:42:59.432Z,1542238979.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-14T23:42:59.432Z,1542238979.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:42:59.433Z,1542238979.433 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:42:59.433Z,1542238979.433 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-14T23:42:59.434Z,1542238979.434 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:42:59.434Z,1542238979.434 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:43:55.937Z,1542239035.937 [CommandLine](IMPORTANT): got command 
2018-11-14T23:43:55.937Z,1542239035.937 [CommandLine](FAULT): Incomplete syntax. Try: help
2018-11-14T23:43:57.666Z,1542239037.666 [CommandLine](IMPORTANT): got command failComponent
2018-11-14T23:43:57.667Z,1542239037.667 [CommandLine](IMPORTANT): Failed components:
2018-11-14T23:43:57.667Z,1542239037.667 [CommandLine](IMPORTANT): AHRS_M2: Communications Fault
2018-11-14T23:43:57.667Z,1542239037.667 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2018-11-14T23:43:57.667Z,1542239037.667 [CommandLine](IMPORTANT): Aanderaa_O2: Communications Fault
2018-11-14T23:44:01.273Z,1542239041.273 [CommandLine](IMPORTANT): got command failComponent none AHRS_M2
2018-11-14T23:44:01.274Z,1542239041.274 [AHRS_M2] No Fault, FailCount= 6
2018-11-14T23:44:01.274Z,1542239041.274 [CommandLine](IMPORTANT): AHRS_M2 failureMode is No Fault
2018-11-14T23:44:01.466Z,1542239041.466 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-14T23:44:08.202Z,1542239048.202 [CommandLine](IMPORTANT): got command get platform_pitch_angle
2018-11-14T23:44:08.203Z,1542239048.203 [CommandLine](IMPORTANT): platform_pitch_angle -0.042319 rad
2018-11-14T23:44:13.998Z,1542239053.998 [CommandLine](IMPORTANT): got command show best platform_pitch_angle
2018-11-14T23:44:13.998Z,1542239053.998 [CommandLine](IMPORTANT): platform_pitch_angle best is AHRS_M2.platform_pitch_angle
2018-11-14T23:44:25.838Z,1542239065.838 [CommandLine](IMPORTANT): got command report touch platform_pitch_angle
2018-11-14T23:44:26.156Z,1542239066.156 [Reporter](INFO): platform_pitch_angle -0.042300 rad
2018-11-14T23:44:26.580Z,1542239066.580 [Reporter](INFO): platform_pitch_angle -0.042344 rad
2018-11-14T23:44:27.015Z,1542239067.015 [Reporter](INFO): platform_pitch_angle -0.042336 rad
2018-11-14T23:44:27.491Z,1542239067.491 [Reporter](INFO): platform_pitch_angle -0.042272 rad
2018-11-14T23:44:27.789Z,1542239067.789 [Reporter](INFO): platform_pitch_angle -0.042197 rad
2018-11-14T23:44:28.188Z,1542239068.188 [Reporter](INFO): platform_pitch_angle -0.042252 rad
2018-11-14T23:44:28.326Z,1542239068.326 [CommandLine](IMPORTANT): got command report clear
2018-11-14T23:44:36.758Z,1542239076.758 [CommandLine](IMPORTANT): got command show best platform_orientation
2018-11-14T23:44:36.759Z,1542239076.759 [CommandLine](IMPORTANT): platform_orientation best is AHRS_M2.platform_orientation
2018-11-14T23:44:38.906Z,1542239078.906 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-11-14T23:44:42.727Z,1542239082.727 [CommandLine](IMPORTANT): got command report touch platform_orientation
2018-11-14T23:44:42.968Z,1542239082.968 [Reporter](INFO): platform_orientation 4.313002 rad
2018-11-14T23:44:43.360Z,1542239083.360 [Reporter](INFO): platform_orientation 4.313196 rad
2018-11-14T23:44:43.768Z,1542239083.768 [Reporter](INFO): platform_orientation 4.312758 rad
2018-11-14T23:44:44.160Z,1542239084.160 [Reporter](INFO): platform_orientation 4.312930 rad
2018-11-14T23:44:44.593Z,1542239084.593 [Reporter](INFO): platform_orientation 4.312863 rad
2018-11-14T23:44:44.959Z,1542239084.959 [Reporter](INFO): platform_orientation 4.313067 rad
2018-11-14T23:44:45.175Z,1542239085.175 [CommandLine](IMPORTANT): got command report clear
2018-11-14T23:45:08.252Z,1542239108.252 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:45:08.252Z,1542239108.252 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-14T23:45:18.627Z,1542239118.627 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:45:18.627Z,1542239118.627 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-14T23:45:18.627Z,1542239118.627 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:45:18.663Z,1542239118.663 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:45:19.133Z,1542239119.133 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:45:19.847Z,1542239119.847 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:45:19.847Z,1542239119.847 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-14T23:45:30.221Z,1542239130.221 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:45:30.221Z,1542239130.221 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-14T23:45:30.222Z,1542239130.222 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:45:30.240Z,1542239130.240 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:45:33.555Z,1542239133.555 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:45:34.061Z,1542239134.061 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:45:34.061Z,1542239134.061 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-14T23:45:44.841Z,1542239144.841 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:45:44.841Z,1542239144.841 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-14T23:45:44.841Z,1542239144.841 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:45:44.860Z,1542239144.860 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:45:44.861Z,1542239144.861 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-14T23:45:45.361Z,1542239145.361 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:45:59.647Z,1542239159.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-14T23:45:59.647Z,1542239159.647 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-11-14T23:45:59.647Z,1542239159.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-14T23:45:59.653Z,1542239159.653 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-14T23:45:59.653Z,1542239159.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-11-14T23:45:59.653Z,1542239159.653 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-14T23:45:59.678Z,1542239159.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-14T23:45:59.678Z,1542239159.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-14T23:46:00.077Z,1542239160.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-14T23:46:00.077Z,1542239160.077 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-11-14T23:46:00.078Z,1542239160.078 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-14T23:46:00.078Z,1542239160.078 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-11-14T23:46:00.456Z,1542239160.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-14T23:46:00.457Z,1542239160.457 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:46:00.457Z,1542239160.457 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:46:00.458Z,1542239160.458 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-14T23:46:00.458Z,1542239160.458 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:46:00.459Z,1542239160.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:46:23.722Z,1542239183.722 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-11-14T23:47:12.612Z,1542239232.612 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-14T23:42:12.4Z
2018-11-14T23:47:12.612Z,1542239232.612 [Default:CheckIn:Read_GPS] Stopped
2018-11-14T23:47:12.612Z,1542239232.612 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-14T23:47:12.989Z,1542239232.989 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-11-14T23:47:17.058Z,1542239237.058 [DataOverHttps](INFO): Sending 188 bytes from file Logs/20181114T233847/Courier0004.lzma
2018-11-14T23:47:17.834Z,1542239237.834 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0004.lzma.bak
2018-11-14T23:47:17.834Z,1542239237.834 [DataOverHttps](INFO): SBD MOMSN=8876351
2018-11-14T23:47:26.906Z,1542239246.906 [DataOverHttps](INFO): Sending 635 bytes from file Logs/20181114T233847/Express0005.lzma
2018-11-14T23:47:27.686Z,1542239247.686 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0005.lzma.bak
2018-11-14T23:47:27.686Z,1542239247.686 [DataOverHttps](INFO): SBD MOMSN=8876353
2018-11-14T23:47:28.522Z,1542239248.522 [Default:CheckIn:Read_Iridium] Stopped
2018-11-14T23:47:28.522Z,1542239248.522 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-14T23:47:28.522Z,1542239248.522 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-14T23:48:15.266Z,1542239295.266 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:48:15.266Z,1542239295.266 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-14T23:48:25.978Z,1542239305.978 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:48:25.978Z,1542239305.978 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-14T23:48:25.978Z,1542239305.978 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:48:26.033Z,1542239306.033 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:48:26.501Z,1542239306.501 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:48:27.266Z,1542239307.266 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:48:27.267Z,1542239307.267 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-14T23:48:37.974Z,1542239317.974 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:48:37.974Z,1542239317.974 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-14T23:48:37.975Z,1542239317.975 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:48:38.027Z,1542239318.027 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:48:38.533Z,1542239318.533 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:48:39.235Z,1542239319.235 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:48:39.235Z,1542239319.235 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-14T23:48:49.850Z,1542239329.850 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:48:49.850Z,1542239329.850 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-14T23:48:49.850Z,1542239329.850 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:48:49.922Z,1542239329.922 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:48:49.922Z,1542239329.922 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-14T23:48:50.345Z,1542239330.345 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:49:00.626Z,1542239340.626 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-14T23:49:00.627Z,1542239340.627 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-11-14T23:49:00.627Z,1542239340.627 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-14T23:49:00.628Z,1542239340.628 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-14T23:49:00.629Z,1542239340.629 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-11-14T23:49:00.629Z,1542239340.629 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-14T23:49:00.666Z,1542239340.666 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-14T23:49:00.666Z,1542239340.666 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-14T23:49:01.050Z,1542239341.050 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-14T23:49:01.050Z,1542239341.050 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-11-14T23:49:01.051Z,1542239341.051 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-14T23:49:01.051Z,1542239341.051 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-11-14T23:49:01.441Z,1542239341.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-14T23:49:01.442Z,1542239341.442 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:49:01.442Z,1542239341.442 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:49:01.442Z,1542239341.442 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-14T23:49:01.443Z,1542239341.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:49:01.443Z,1542239341.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:49:38.266Z,1542239378.266 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-14T23:49:38.266Z,1542239378.266 [NAL9602] Data Fault, FailCount= 1
2018-11-14T23:49:38.266Z,1542239378.266 [NAL9602](ERROR): Data Fault
2018-11-14T23:49:38.374Z,1542239378.374 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-14T23:49:38.670Z,1542239378.670 [NAL9602](INFO): Powering down
2018-11-14T23:49:39.538Z,1542239379.538 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-14T23:49:39.538Z,1542239379.538 [NAL9602] No Fault, FailCount= 1
2018-11-14T23:50:08.742Z,1542239408.742 [NAL9602](INFO): Powering up NAL9602
2018-11-14T23:50:19.550Z,1542239419.550 [NAL9602](INFO): NAL9602 initialized
2018-11-14T23:50:29.645Z,1542239429.645 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,676.98
2018-11-14T23:51:10.556Z,1542239470.556 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-11-14T23:51:10.556Z,1542239470.556 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,         0.8
2018-11-14T23:51:20.174Z,1542239480.174 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:51:20.174Z,1542239480.174 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-14T23:51:30.936Z,1542239490.936 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:51:30.936Z,1542239490.936 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-14T23:51:30.936Z,1542239490.936 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:51:30.997Z,1542239490.997 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:51:31.471Z,1542239491.471 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:51:32.210Z,1542239492.210 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:51:32.210Z,1542239492.210 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-14T23:51:42.622Z,1542239502.622 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:51:42.622Z,1542239502.622 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-14T23:51:42.622Z,1542239502.622 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:51:42.675Z,1542239502.675 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:51:43.137Z,1542239503.137 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:51:43.866Z,1542239503.866 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:51:43.867Z,1542239503.867 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-14T23:51:54.622Z,1542239514.622 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:51:54.622Z,1542239514.622 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-14T23:51:54.622Z,1542239514.622 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:51:54.675Z,1542239514.675 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:51:54.676Z,1542239514.676 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-14T23:51:55.149Z,1542239515.149 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:52:01.446Z,1542239521.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-14T23:52:01.446Z,1542239521.446 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-11-14T23:52:01.446Z,1542239521.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-14T23:52:01.448Z,1542239521.448 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-14T23:52:01.448Z,1542239521.448 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-11-14T23:52:01.448Z,1542239521.448 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-14T23:52:01.477Z,1542239521.477 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-14T23:52:01.477Z,1542239521.477 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-14T23:52:01.877Z,1542239521.877 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-14T23:52:01.877Z,1542239521.877 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-11-14T23:52:01.878Z,1542239521.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-14T23:52:01.878Z,1542239521.878 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-11-14T23:52:02.258Z,1542239522.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-14T23:52:02.259Z,1542239522.259 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:52:02.259Z,1542239522.259 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:52:02.260Z,1542239522.260 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-14T23:52:02.260Z,1542239522.260 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:52:02.260Z,1542239522.260 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:52:28.695Z,1542239548.695 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-14T23:52:28.695Z,1542239548.695 [Default:CheckIn:C.Wait] Stopped
2018-11-14T23:52:28.695Z,1542239548.695 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-14T23:52:28.695Z,1542239548.695 [Default:CheckIn:D] Running Loop=1
2018-11-14T23:52:29.058Z,1542239549.058 [Default:CheckIn:D] Stopped
2018-11-14T23:52:29.058Z,1542239549.058 [Default:CheckIn:E] Running Loop=1
2018-11-14T23:52:29.457Z,1542239549.457 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.505482 min 
2018-11-14T23:52:29.459Z,1542239549.459 [Default:CheckIn:E] Stopped
2018-11-14T23:52:29.459Z,1542239549.459 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-14T23:52:29.459Z,1542239549.459 [Default:CheckIn] Stopped
2018-11-14T23:52:29.459Z,1542239549.459 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-14T23:52:29.459Z,1542239549.459 [Default:CheckIn](INFO): Running loop #2
2018-11-14T23:52:29.459Z,1542239549.459 [Default:CheckIn] Running Loop=2
2018-11-14T23:52:29.460Z,1542239549.460 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-14T23:52:29.460Z,1542239549.460 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-14T23:54:00.024Z,1542239640.024 [CBIT](INFO): Clearing failed state for component DropWeight
2018-11-14T23:54:00.024Z,1542239640.024 [DropWeight] No Fault, FailCount= 1
2018-11-14T23:54:24.894Z,1542239664.894 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:54:24.894Z,1542239664.894 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-14T23:54:35.313Z,1542239675.313 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:54:35.313Z,1542239675.313 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-14T23:54:35.313Z,1542239675.313 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:54:35.332Z,1542239675.332 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:54:35.559Z,1542239675.559 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:54:36.231Z,1542239676.231 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:54:36.231Z,1542239676.231 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-14T23:54:46.608Z,1542239686.608 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:54:46.608Z,1542239686.608 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-14T23:54:46.608Z,1542239686.608 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:54:46.627Z,1542239686.627 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:54:47.093Z,1542239687.093 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:54:47.798Z,1542239687.798 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:54:47.798Z,1542239687.798 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-14T23:54:58.184Z,1542239698.184 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:54:58.184Z,1542239698.184 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-14T23:54:58.184Z,1542239698.184 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:54:58.236Z,1542239698.236 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:54:58.236Z,1542239698.236 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-14T23:54:58.733Z,1542239698.733 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:55:02.586Z,1542239702.586 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-14T23:55:02.586Z,1542239702.586 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-11-14T23:55:02.587Z,1542239702.587 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-14T23:55:02.588Z,1542239702.588 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-14T23:55:02.588Z,1542239702.588 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-11-14T23:55:02.593Z,1542239702.593 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-14T23:55:02.622Z,1542239702.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-14T23:55:02.622Z,1542239702.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-14T23:55:03.004Z,1542239703.004 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-14T23:55:03.004Z,1542239703.004 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-11-14T23:55:03.005Z,1542239703.005 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-14T23:55:03.005Z,1542239703.005 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-11-14T23:55:03.405Z,1542239703.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-14T23:55:03.406Z,1542239703.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:55:03.406Z,1542239703.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:55:03.406Z,1542239703.406 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-14T23:55:03.407Z,1542239703.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:55:03.407Z,1542239703.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:57:28.517Z,1542239848.517 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:57:28.518Z,1542239848.518 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-14T23:57:31.701Z,1542239851.701 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-14T23:52:29.5Z
2018-11-14T23:57:31.701Z,1542239851.701 [Default:CheckIn:Read_GPS] Stopped
2018-11-14T23:57:31.701Z,1542239851.701 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-14T23:57:36.845Z,1542239856.845 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0007.lzma
2018-11-14T23:57:37.518Z,1542239857.518 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0007.lzma.bak
2018-11-14T23:57:37.518Z,1542239857.518 [DataOverHttps](INFO): SBD MOMSN=8876450
2018-11-14T23:57:41.764Z,1542239861.764 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:57:41.764Z,1542239861.764 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-14T23:57:41.764Z,1542239861.764 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:57:41.819Z,1542239861.819 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:57:42.313Z,1542239862.313 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:57:43.007Z,1542239863.007 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:57:43.013Z,1542239863.013 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-14T23:57:46.653Z,1542239866.653 [DataOverHttps](INFO): Sending 289 bytes from file Logs/20181114T233847/Express0008.lzma
2018-11-14T23:57:47.406Z,1542239867.406 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0008.lzma.bak
2018-11-14T23:57:47.406Z,1542239867.406 [DataOverHttps](INFO): SBD MOMSN=8876452
2018-11-14T23:57:48.244Z,1542239868.244 [Default:CheckIn:Read_Iridium] Stopped
2018-11-14T23:57:48.244Z,1542239868.244 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-14T23:57:48.244Z,1542239868.244 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-14T23:57:53.608Z,1542239873.608 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:57:53.609Z,1542239873.609 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-14T23:57:53.609Z,1542239873.609 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:57:53.652Z,1542239873.652 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:57:54.113Z,1542239874.113 [Aanderaa_O2](INFO): Powering down
2018-11-14T23:57:54.861Z,1542239874.861 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-14T23:57:54.861Z,1542239874.861 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-14T23:58:03.625Z,1542239883.625 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-14T23:58:03.626Z,1542239883.626 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-11-14T23:58:03.626Z,1542239883.626 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-14T23:58:03.627Z,1542239883.627 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-14T23:58:03.628Z,1542239883.628 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-11-14T23:58:03.628Z,1542239883.628 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-14T23:58:03.665Z,1542239883.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-14T23:58:03.665Z,1542239883.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-14T23:58:04.046Z,1542239884.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-14T23:58:04.046Z,1542239884.046 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-11-14T23:58:04.046Z,1542239884.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-14T23:58:04.046Z,1542239884.046 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-11-14T23:58:04.441Z,1542239884.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-14T23:58:04.441Z,1542239884.441 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:58:04.442Z,1542239884.442 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:58:04.442Z,1542239884.442 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-14T23:58:04.443Z,1542239884.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-14T23:58:04.443Z,1542239884.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-14T23:58:05.262Z,1542239885.262 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-14T23:58:05.262Z,1542239885.262 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-14T23:58:05.262Z,1542239885.262 [Aanderaa_O2](ERROR): Communications Fault
2018-11-14T23:58:05.351Z,1542239885.351 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-14T23:58:05.352Z,1542239885.352 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-14T23:58:05.709Z,1542239885.709 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:00:15.573Z,1542240015.573 [AHRS_M2](ERROR): Read RFS packet UART error: serial timeout
2018-11-15T00:00:20.731Z,1542240020.731 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T00:00:20.731Z,1542240020.731 [NAL9602] Data Fault, FailCount= 2
2018-11-15T00:00:20.731Z,1542240020.731 [NAL9602](ERROR): Data Fault
2018-11-15T00:00:20.826Z,1542240020.826 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T00:00:21.123Z,1542240021.123 [NAL9602](INFO): Powering down
2018-11-15T00:00:21.971Z,1542240021.971 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T00:00:21.971Z,1542240021.971 [NAL9602] No Fault, FailCount= 2
2018-11-15T00:00:24.721Z,1542240024.721 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-15T00:00:24.721Z,1542240024.721 [AHRS_M2] Data Fault, FailCount= 1
2018-11-15T00:00:24.721Z,1542240024.721 [AHRS_M2](ERROR): Data Fault
2018-11-15T00:00:24.796Z,1542240024.796 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-15T00:00:25.110Z,1542240025.110 [AHRS_M2](INFO): Powering down
2018-11-15T00:00:28.777Z,1542240028.777 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:00:28.777Z,1542240028.777 [AHRS_M2] No Fault, FailCount= 1
2018-11-15T00:00:29.110Z,1542240029.110 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:00:32.633Z,1542240032.633 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:33.057Z,1542240033.057 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:33.457Z,1542240033.457 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:33.865Z,1542240033.865 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:34.265Z,1542240034.265 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:34.665Z,1542240034.665 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:35.069Z,1542240035.069 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:35.474Z,1542240035.474 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:35.547Z,1542240035.547 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:00:35.547Z,1542240035.547 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-15T00:00:35.881Z,1542240035.881 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:36.293Z,1542240036.293 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:36.725Z,1542240036.725 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:37.129Z,1542240037.129 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:37.569Z,1542240037.569 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:37.977Z,1542240037.977 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:38.365Z,1542240038.365 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:38.933Z,1542240038.933 [AHRS_M2](ERROR): Read RFS packet UART error: serial timeout
2018-11-15T00:00:48.118Z,1542240048.118 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:00:48.119Z,1542240048.119 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-15T00:00:48.119Z,1542240048.119 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:00:48.177Z,1542240048.177 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:00:48.349Z,1542240048.349 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:00:48.597Z,1542240048.597 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-15T00:00:48.597Z,1542240048.597 [AHRS_M2] Data Fault, FailCount= 2
2018-11-15T00:00:48.597Z,1542240048.597 [AHRS_M2](ERROR): Data Fault
2018-11-15T00:00:48.678Z,1542240048.678 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-15T00:00:48.985Z,1542240048.985 [AHRS_M2](INFO): Powering down
2018-11-15T00:00:49.129Z,1542240049.129 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:00:49.129Z,1542240049.129 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-15T00:00:51.388Z,1542240051.388 [NAL9602](INFO): Powering up NAL9602
2018-11-15T00:00:52.646Z,1542240052.646 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:00:52.646Z,1542240052.646 [AHRS_M2] No Fault, FailCount= 2
2018-11-15T00:00:52.985Z,1542240052.985 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:00:56.509Z,1542240056.509 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:56.933Z,1542240056.933 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:57.329Z,1542240057.329 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:57.745Z,1542240057.745 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:58.157Z,1542240058.157 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:58.541Z,1542240058.541 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:58.957Z,1542240058.957 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:59.381Z,1542240059.381 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:59.781Z,1542240059.781 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:00:59.831Z,1542240059.831 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:00:59.831Z,1542240059.831 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-15T00:00:59.831Z,1542240059.831 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:00:59.889Z,1542240059.889 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:01:00.221Z,1542240060.221 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:00.365Z,1542240060.365 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:01:00.709Z,1542240060.709 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:01.105Z,1542240061.105 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:01.151Z,1542240061.151 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:01:01.152Z,1542240061.152 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-15T00:01:01.521Z,1542240061.521 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:01.949Z,1542240061.949 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:02.357Z,1542240062.357 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:02.375Z,1542240062.375 [NAL9602](INFO): NAL9602 initialized
2018-11-15T00:01:02.777Z,1542240062.777 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:03.189Z,1542240063.189 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:03.189Z,1542240063.189 [AHRS_M2](FAULT): Failed to initialize within timeout.
2018-11-15T00:01:03.189Z,1542240063.189 [AHRS_M2] Communications Fault, FailCount= 3
2018-11-15T00:01:03.189Z,1542240063.189 [AHRS_M2](ERROR): Communications Fault
2018-11-15T00:01:03.293Z,1542240063.293 [CBIT](ERROR): Communications Fault in component: AHRS_M2
2018-11-15T00:01:03.309Z,1542240063.309 [AHRS_M2](INFO): Powering down
2018-11-15T00:01:04.562Z,1542240064.562 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:01:04.562Z,1542240064.562 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-11-15T00:01:04.562Z,1542240064.562 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:01:04.564Z,1542240064.564 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:01:04.564Z,1542240064.564 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-11-15T00:01:04.564Z,1542240064.564 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:01:04.586Z,1542240064.586 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:01:04.586Z,1542240064.586 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:01:04.964Z,1542240064.964 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:01:04.964Z,1542240064.964 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-11-15T00:01:04.965Z,1542240064.965 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:01:04.965Z,1542240064.965 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-11-15T00:01:05.359Z,1542240065.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:01:05.360Z,1542240065.360 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:01:05.360Z,1542240065.360 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:01:05.361Z,1542240065.361 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:01:05.361Z,1542240065.361 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:01:05.362Z,1542240065.362 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:01:06.953Z,1542240066.953 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:01:06.953Z,1542240066.953 [AHRS_M2] No Fault, FailCount= 3
2018-11-15T00:01:07.302Z,1542240067.302 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:01:10.837Z,1542240070.837 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:11.245Z,1542240071.245 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:11.653Z,1542240071.653 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:11.692Z,1542240071.692 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:01:11.692Z,1542240071.692 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-15T00:01:11.692Z,1542240071.692 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:01:11.710Z,1542240071.710 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:01:11.710Z,1542240071.710 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-15T00:01:12.073Z,1542240072.073 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:12.231Z,1542240072.231 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:01:12.577Z,1542240072.577 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:12.985Z,1542240072.985 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:13.389Z,1542240073.389 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:13.809Z,1542240073.809 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:14.209Z,1542240074.209 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:14.613Z,1542240074.613 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:15.033Z,1542240075.033 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:15.469Z,1542240075.469 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:15.913Z,1542240075.913 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:16.321Z,1542240076.321 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:16.741Z,1542240076.741 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:17.153Z,1542240077.153 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:17.569Z,1542240077.569 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:17.569Z,1542240077.569 [AHRS_M2](FAULT): Failed to initialize within timeout.
2018-11-15T00:01:17.569Z,1542240077.569 [AHRS_M2] Communications Fault, FailCount= 4
2018-11-15T00:01:17.569Z,1542240077.569 [AHRS_M2](ERROR): Communications Fault
2018-11-15T00:01:17.682Z,1542240077.682 [CBIT](ERROR): Communications Fault in component: AHRS_M2
2018-11-15T00:01:17.692Z,1542240077.692 [AHRS_M2](INFO): Powering down
2018-11-15T00:01:23.767Z,1542240083.767 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:01:23.767Z,1542240083.767 [AHRS_M2] No Fault, FailCount= 4
2018-11-15T00:01:24.122Z,1542240084.122 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:01:27.645Z,1542240087.645 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:27.861Z,1542240087.861 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:28.469Z,1542240088.469 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:28.901Z,1542240088.901 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:29.301Z,1542240089.301 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:29.709Z,1542240089.709 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:30.129Z,1542240090.129 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:30.537Z,1542240090.537 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:30.961Z,1542240090.961 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:31.157Z,1542240091.157 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:01:41.853Z,1542240101.853 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-15T00:01:41.853Z,1542240101.853 [AHRS_M2] Data Fault, FailCount= 5
2018-11-15T00:01:41.853Z,1542240101.853 [AHRS_M2](ERROR): Data Fault
2018-11-15T00:01:41.938Z,1542240101.938 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-15T00:01:41.938Z,1542240101.938 [CBIT](CRITICAL): Data Fault in component: AHRS_M2
2018-11-15T00:01:42.242Z,1542240102.242 [AHRS_M2](INFO): Powering down
2018-11-15T00:01:42.364Z,1542240102.364 [CBIT](INFO): Critical error at 20181115T000141
2018-11-15T00:02:48.723Z,1542240168.723 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T00:02:48.723Z,1542240168.723 [Default:CheckIn:C.Wait] Stopped
2018-11-15T00:02:48.723Z,1542240168.723 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T00:02:48.723Z,1542240168.723 [Default:CheckIn:D] Running Loop=1
2018-11-15T00:02:49.111Z,1542240169.111 [Default:CheckIn:D] Stopped
2018-11-15T00:02:49.112Z,1542240169.112 [Default:CheckIn:E] Running Loop=1
2018-11-15T00:02:49.526Z,1542240169.526 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.839732 min 
2018-11-15T00:02:49.526Z,1542240169.526 [Default:CheckIn:E] Stopped
2018-11-15T00:02:49.526Z,1542240169.526 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T00:02:49.526Z,1542240169.526 [Default:CheckIn] Stopped
2018-11-15T00:02:49.527Z,1542240169.527 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T00:02:49.527Z,1542240169.527 [Default:CheckIn](INFO): Running loop #3
2018-11-15T00:02:49.527Z,1542240169.527 [Default:CheckIn] Running Loop=3
2018-11-15T00:02:49.527Z,1542240169.527 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T00:02:49.527Z,1542240169.527 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T00:03:44.260Z,1542240224.260 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:03:44.260Z,1542240224.260 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-11-15T00:03:44.260Z,1542240224.260 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:03:44.262Z,1542240224.262 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:03:44.262Z,1542240224.262 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-11-15T00:03:44.262Z,1542240224.262 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:03:44.274Z,1542240224.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:03:44.274Z,1542240224.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:03:44.275Z,1542240224.275 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:03:44.275Z,1542240224.275 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-15T00:03:44.429Z,1542240224.429 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:03:44.429Z,1542240224.429 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-11-15T00:03:44.429Z,1542240224.429 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:03:44.429Z,1542240224.429 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-11-15T00:03:44.748Z,1542240224.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:03:44.749Z,1542240224.749 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:03:44.749Z,1542240224.749 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:03:44.750Z,1542240224.750 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:03:44.750Z,1542240224.750 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:03:44.751Z,1542240224.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:03:54.713Z,1542240234.713 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:03:54.713Z,1542240234.713 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-15T00:03:54.713Z,1542240234.713 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:03:54.766Z,1542240234.766 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:03:55.233Z,1542240235.233 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:03:55.950Z,1542240235.950 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:03:55.950Z,1542240235.950 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-15T00:04:06.715Z,1542240246.715 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:04:06.715Z,1542240246.715 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-15T00:04:06.715Z,1542240246.715 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:04:06.738Z,1542240246.738 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:04:07.221Z,1542240247.221 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:04:07.945Z,1542240247.945 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:04:07.945Z,1542240247.945 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-15T00:04:19.460Z,1542240259.460 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:04:19.460Z,1542240259.460 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-15T00:04:19.460Z,1542240259.460 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:04:19.482Z,1542240259.482 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:04:19.482Z,1542240259.482 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-15T00:04:19.745Z,1542240259.745 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:05:45.140Z,1542240345.140 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:05:45.140Z,1542240345.140 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-11-15T00:05:45.140Z,1542240345.140 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:05:45.143Z,1542240345.143 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:05:45.143Z,1542240345.143 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-11-15T00:05:45.143Z,1542240345.143 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:05:45.194Z,1542240345.194 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:05:45.194Z,1542240345.194 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:05:45.559Z,1542240345.559 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:05:45.559Z,1542240345.559 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-11-15T00:05:45.560Z,1542240345.560 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:05:45.560Z,1542240345.560 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-11-15T00:05:45.944Z,1542240345.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:05:45.945Z,1542240345.945 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:05:45.945Z,1542240345.945 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:05:45.946Z,1542240345.946 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:05:45.946Z,1542240345.946 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:05:45.946Z,1542240345.946 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:06:41.930Z,1542240401.930 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:06:41.930Z,1542240401.930 [AHRS_M2] No Fault, FailCount= 5
2018-11-15T00:06:42.278Z,1542240402.278 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:06:45.949Z,1542240405.949 [AHRS_M2](ERROR): Read RFS packet UART error: serial timeout
2018-11-15T00:06:49.584Z,1542240409.584 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:06:49.585Z,1542240409.585 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-15T00:06:55.889Z,1542240415.889 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-15T00:06:55.889Z,1542240415.889 [AHRS_M2] Data Fault, FailCount= 1
2018-11-15T00:06:55.889Z,1542240415.889 [AHRS_M2](ERROR): Data Fault
2018-11-15T00:06:55.970Z,1542240415.970 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-15T00:06:56.278Z,1542240416.278 [AHRS_M2](INFO): Powering down
2018-11-15T00:06:59.964Z,1542240419.964 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:06:59.964Z,1542240419.964 [AHRS_M2] No Fault, FailCount= 1
2018-11-15T00:07:00.279Z,1542240420.279 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:07:00.307Z,1542240420.307 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:07:00.308Z,1542240420.308 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-15T00:07:00.308Z,1542240420.308 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:07:00.342Z,1542240420.342 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:07:00.841Z,1542240420.841 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:07:01.583Z,1542240421.583 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:07:01.583Z,1542240421.583 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-15T00:07:11.924Z,1542240431.924 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:07:11.924Z,1542240431.924 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-15T00:07:11.924Z,1542240431.924 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:07:11.943Z,1542240431.943 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:07:12.453Z,1542240432.453 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:07:17.065Z,1542240437.065 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-15T00:07:17.065Z,1542240437.065 [AHRS_M2] Data Fault, FailCount= 2
2018-11-15T00:07:17.065Z,1542240437.065 [AHRS_M2](ERROR): Data Fault
2018-11-15T00:07:17.139Z,1542240437.139 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-15T00:07:17.140Z,1542240437.140 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:07:17.140Z,1542240437.140 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-15T00:07:17.438Z,1542240437.438 [AHRS_M2](INFO): Powering down
2018-11-15T00:07:21.123Z,1542240441.123 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:07:21.123Z,1542240441.123 [AHRS_M2] No Fault, FailCount= 2
2018-11-15T00:07:21.438Z,1542240441.438 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:07:27.876Z,1542240447.876 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:07:27.876Z,1542240447.876 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-15T00:07:27.876Z,1542240447.876 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:07:27.898Z,1542240447.898 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:07:27.899Z,1542240447.899 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-15T00:07:28.401Z,1542240448.401 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:07:35.049Z,1542240455.049 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-15T00:07:35.049Z,1542240455.049 [AHRS_M2] Data Fault, FailCount= 3
2018-11-15T00:07:35.049Z,1542240455.049 [AHRS_M2](ERROR): Data Fault
2018-11-15T00:07:35.168Z,1542240455.168 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-15T00:07:35.438Z,1542240455.438 [AHRS_M2](INFO): Powering down
2018-11-15T00:07:39.101Z,1542240459.101 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:07:39.101Z,1542240459.101 [AHRS_M2] No Fault, FailCount= 3
2018-11-15T00:07:39.439Z,1542240459.439 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:07:43.099Z,1542240463.099 [AHRS_M2](ERROR): Read RFS packet UART error: serial timeout
2018-11-15T00:07:50.661Z,1542240470.661 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T00:02:49.5Z
2018-11-15T00:07:50.661Z,1542240470.661 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T00:07:50.661Z,1542240470.661 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T00:07:52.709Z,1542240472.709 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-15T00:07:52.709Z,1542240472.709 [AHRS_M2] Data Fault, FailCount= 4
2018-11-15T00:07:52.709Z,1542240472.709 [AHRS_M2](ERROR): Data Fault
2018-11-15T00:07:55.563Z,1542240475.563 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-15T00:07:55.574Z,1542240475.574 [AHRS_M2](INFO): Powering down
2018-11-15T00:07:55.649Z,1542240475.649 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181114T233847/Courier0010.lzma
2018-11-15T00:07:56.375Z,1542240476.375 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0010.lzma.bak
2018-11-15T00:07:56.376Z,1542240476.376 [DataOverHttps](INFO): SBD MOMSN=8876526
2018-11-15T00:08:00.882Z,1542240480.882 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:08:00.882Z,1542240480.882 [AHRS_M2] No Fault, FailCount= 4
2018-11-15T00:08:01.190Z,1542240481.190 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:08:05.254Z,1542240485.254 [DataOverHttps](INFO): Sending 436 bytes from file Logs/20181114T233847/Express0011.lzma
2018-11-15T00:08:05.674Z,1542240485.674 [AHRS_M2](ERROR): Read RFS packet UART error: serial timeout
2018-11-15T00:08:06.026Z,1542240486.026 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0011.lzma.bak
2018-11-15T00:08:06.026Z,1542240486.026 [DataOverHttps](INFO): SBD MOMSN=8876529
2018-11-15T00:08:06.824Z,1542240486.824 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T00:08:06.824Z,1542240486.824 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T00:08:06.824Z,1542240486.824 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T00:08:15.301Z,1542240495.301 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-15T00:08:15.301Z,1542240495.301 [AHRS_M2] Data Fault, FailCount= 5
2018-11-15T00:08:15.301Z,1542240495.301 [AHRS_M2](ERROR): Data Fault
2018-11-15T00:08:15.402Z,1542240495.402 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-15T00:08:15.403Z,1542240495.403 [CBIT](CRITICAL): Data Fault in component: AHRS_M2
2018-11-15T00:08:15.690Z,1542240495.690 [AHRS_M2](INFO): Powering down
2018-11-15T00:08:15.818Z,1542240495.818 [CBIT](INFO): Critical error at 20181115T000815
2018-11-15T00:08:46.148Z,1542240526.148 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:08:46.148Z,1542240526.148 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-11-15T00:08:46.148Z,1542240526.148 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:08:46.151Z,1542240526.151 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:08:46.151Z,1542240526.151 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-11-15T00:08:46.151Z,1542240526.151 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:08:46.209Z,1542240526.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:08:46.209Z,1542240526.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:08:46.604Z,1542240526.604 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:08:46.605Z,1542240526.605 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-11-15T00:08:46.605Z,1542240526.605 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:08:46.605Z,1542240526.605 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-11-15T00:08:46.940Z,1542240526.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:08:46.945Z,1542240526.945 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:08:46.945Z,1542240526.945 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:08:46.946Z,1542240526.946 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:08:46.946Z,1542240526.946 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:08:46.947Z,1542240526.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:09:58.160Z,1542240598.160 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:09:58.160Z,1542240598.160 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-15T00:10:08.932Z,1542240608.932 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:10:08.932Z,1542240608.932 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-15T00:10:08.932Z,1542240608.932 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:10:08.949Z,1542240608.949 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:10:09.453Z,1542240609.453 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:10:10.190Z,1542240610.190 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:10:10.190Z,1542240610.190 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-15T00:10:20.553Z,1542240620.553 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:10:20.553Z,1542240620.553 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-15T00:10:20.553Z,1542240620.553 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:10:20.572Z,1542240620.572 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:10:21.037Z,1542240621.037 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:10:21.771Z,1542240621.771 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:10:21.771Z,1542240621.771 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-15T00:10:32.211Z,1542240632.211 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:10:32.211Z,1542240632.211 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-15T00:10:32.211Z,1542240632.211 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:10:32.266Z,1542240632.266 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:10:32.266Z,1542240632.266 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-15T00:10:32.705Z,1542240632.705 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:10:46.989Z,1542240646.989 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:10:46.989Z,1542240646.989 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-11-15T00:10:46.989Z,1542240646.989 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:10:46.991Z,1542240646.991 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:10:46.991Z,1542240646.991 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-11-15T00:10:46.991Z,1542240646.991 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:10:47.004Z,1542240647.004 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:10:47.004Z,1542240647.004 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:10:47.434Z,1542240647.434 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:10:47.435Z,1542240647.435 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-11-15T00:10:47.435Z,1542240647.435 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:10:47.435Z,1542240647.435 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-11-15T00:10:47.796Z,1542240647.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:10:47.797Z,1542240647.797 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:10:47.797Z,1542240647.797 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:10:47.798Z,1542240647.798 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:10:47.798Z,1542240647.798 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:10:47.799Z,1542240647.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:11:06.970Z,1542240666.970 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T00:11:06.970Z,1542240666.970 [NAL9602] Data Fault, FailCount= 3
2018-11-15T00:11:06.970Z,1542240666.970 [NAL9602](ERROR): Data Fault
2018-11-15T00:11:07.004Z,1542240667.004 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T00:11:07.366Z,1542240667.366 [NAL9602](INFO): Powering down
2018-11-15T00:11:08.213Z,1542240668.213 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T00:11:08.213Z,1542240668.213 [NAL9602] No Fault, FailCount= 3
2018-11-15T00:11:37.762Z,1542240697.762 [NAL9602](INFO): Powering up NAL9602
2018-11-15T00:11:48.571Z,1542240708.571 [NAL9602](INFO): NAL9602 initialized
2018-11-15T00:12:48.187Z,1542240768.187 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:12:48.187Z,1542240768.187 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-11-15T00:12:48.187Z,1542240768.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:12:48.188Z,1542240768.188 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:12:48.188Z,1542240768.188 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-11-15T00:12:48.189Z,1542240768.189 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:12:48.201Z,1542240768.201 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:12:48.202Z,1542240768.202 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:12:48.616Z,1542240768.616 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:12:48.617Z,1542240768.617 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-11-15T00:12:48.617Z,1542240768.617 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:12:48.617Z,1542240768.617 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-11-15T00:12:48.992Z,1542240768.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:12:48.993Z,1542240768.993 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:12:48.993Z,1542240768.993 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:12:48.994Z,1542240768.994 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:12:48.994Z,1542240768.994 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:12:48.995Z,1542240768.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:13:02.345Z,1542240782.345 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:13:02.345Z,1542240782.345 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-15T00:13:07.103Z,1542240787.103 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T00:13:07.103Z,1542240787.103 [Default:CheckIn:C.Wait] Stopped
2018-11-15T00:13:07.103Z,1542240787.103 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T00:13:07.104Z,1542240787.104 [Default:CheckIn:D] Running Loop=1
2018-11-15T00:13:07.514Z,1542240787.514 [Default:CheckIn:D] Stopped
2018-11-15T00:13:07.514Z,1542240787.514 [Default:CheckIn:E] Running Loop=1
2018-11-15T00:13:07.903Z,1542240787.903 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.146434 min 
2018-11-15T00:13:07.904Z,1542240787.904 [Default:CheckIn:E] Stopped
2018-11-15T00:13:07.904Z,1542240787.904 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T00:13:07.904Z,1542240787.904 [Default:CheckIn] Stopped
2018-11-15T00:13:07.904Z,1542240787.904 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T00:13:07.904Z,1542240787.904 [Default:CheckIn](INFO): Running loop #4
2018-11-15T00:13:07.904Z,1542240787.904 [Default:CheckIn] Running Loop=4
2018-11-15T00:13:07.904Z,1542240787.904 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T00:13:07.904Z,1542240787.904 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T00:13:12.705Z,1542240792.705 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:13:12.705Z,1542240792.705 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-15T00:13:12.706Z,1542240792.706 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:13:12.758Z,1542240792.758 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:13:13.221Z,1542240793.221 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:13:13.934Z,1542240793.934 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:13:13.934Z,1542240793.934 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-15T00:13:15.546Z,1542240795.546 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:13:15.546Z,1542240795.546 [AHRS_M2] No Fault, FailCount= 5
2018-11-15T00:13:15.869Z,1542240795.869 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:13:24.323Z,1542240804.323 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:13:24.323Z,1542240804.323 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-15T00:13:24.323Z,1542240804.323 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:13:24.354Z,1542240804.354 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:13:27.637Z,1542240807.637 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:13:28.183Z,1542240808.183 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:13:28.183Z,1542240808.183 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-15T00:13:29.293Z,1542240809.293 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-15T00:13:29.293Z,1542240809.293 [AHRS_M2] Data Fault, FailCount= 1
2018-11-15T00:13:29.293Z,1542240809.293 [AHRS_M2](ERROR): Data Fault
2018-11-15T00:13:29.376Z,1542240809.376 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-15T00:13:29.682Z,1542240809.682 [AHRS_M2](INFO): Powering down
2018-11-15T00:13:33.371Z,1542240813.371 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:13:33.371Z,1542240813.371 [AHRS_M2] No Fault, FailCount= 1
2018-11-15T00:13:33.683Z,1542240813.683 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:13:38.543Z,1542240818.543 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:13:38.543Z,1542240818.543 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-15T00:13:38.543Z,1542240818.543 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:13:38.606Z,1542240818.606 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:13:38.607Z,1542240818.607 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-15T00:13:39.037Z,1542240819.037 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:13:47.293Z,1542240827.293 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-15T00:13:47.293Z,1542240827.293 [AHRS_M2] Data Fault, FailCount= 2
2018-11-15T00:13:47.293Z,1542240827.293 [AHRS_M2](ERROR): Data Fault
2018-11-15T00:13:47.398Z,1542240827.398 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-15T00:13:47.682Z,1542240827.682 [AHRS_M2](INFO): Powering down
2018-11-15T00:13:51.350Z,1542240831.350 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:13:51.350Z,1542240831.350 [AHRS_M2] No Fault, FailCount= 2
2018-11-15T00:13:51.681Z,1542240831.681 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:14:04.945Z,1542240844.945 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-15T00:14:04.945Z,1542240844.945 [AHRS_M2] Data Fault, FailCount= 3
2018-11-15T00:14:04.945Z,1542240844.945 [AHRS_M2](ERROR): Data Fault
2018-11-15T00:14:05.045Z,1542240845.045 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-15T00:14:05.333Z,1542240845.333 [AHRS_M2](INFO): Powering down
2018-11-15T00:14:08.981Z,1542240848.981 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:14:08.981Z,1542240848.981 [AHRS_M2] No Fault, FailCount= 3
2018-11-15T00:14:09.333Z,1542240849.333 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:14:13.005Z,1542240853.005 [AHRS_M2](ERROR): Read RFS packet UART error: serial timeout
2018-11-15T00:14:22.945Z,1542240862.945 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-15T00:14:22.945Z,1542240862.945 [AHRS_M2] Data Fault, FailCount= 4
2018-11-15T00:14:22.945Z,1542240862.945 [AHRS_M2](ERROR): Data Fault
2018-11-15T00:14:23.030Z,1542240863.030 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-15T00:14:23.333Z,1542240863.333 [AHRS_M2](INFO): Powering down
2018-11-15T00:14:27.004Z,1542240867.004 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:14:27.004Z,1542240867.004 [AHRS_M2] No Fault, FailCount= 4
2018-11-15T00:14:27.334Z,1542240867.334 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:14:30.997Z,1542240870.997 [AHRS_M2](ERROR): Read RFS packet UART error: serial timeout
2018-11-15T00:14:40.593Z,1542240880.593 [AHRS_M2](FAULT): Failed to acquire valid data within timeout.
2018-11-15T00:14:40.593Z,1542240880.593 [AHRS_M2] Data Fault, FailCount= 5
2018-11-15T00:14:40.593Z,1542240880.593 [AHRS_M2](ERROR): Data Fault
2018-11-15T00:14:40.688Z,1542240880.688 [CBIT](ERROR): Data Fault in component: AHRS_M2
2018-11-15T00:14:40.688Z,1542240880.688 [CBIT](CRITICAL): Data Fault in component: AHRS_M2
2018-11-15T00:14:40.982Z,1542240880.982 [AHRS_M2](INFO): Powering down
2018-11-15T00:14:41.098Z,1542240881.098 [CBIT](INFO): Critical error at 20181115T001440
2018-11-15T00:15:49.020Z,1542240949.020 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:15:49.020Z,1542240949.020 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-11-15T00:15:49.020Z,1542240949.020 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:15:49.022Z,1542240949.022 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:15:49.022Z,1542240949.022 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-11-15T00:15:49.022Z,1542240949.022 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:15:49.034Z,1542240949.034 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:15:49.034Z,1542240949.034 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:15:49.428Z,1542240949.428 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:15:49.428Z,1542240949.428 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-11-15T00:15:49.429Z,1542240949.429 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:15:49.429Z,1542240949.429 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-11-15T00:15:49.835Z,1542240949.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:15:49.835Z,1542240949.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:15:49.835Z,1542240949.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:15:49.836Z,1542240949.836 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:15:49.836Z,1542240949.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:15:49.837Z,1542240949.837 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:16:08.651Z,1542240968.651 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:16:08.651Z,1542240968.651 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-15T00:16:19.007Z,1542240979.007 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:16:19.007Z,1542240979.007 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-15T00:16:19.007Z,1542240979.007 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:16:19.029Z,1542240979.029 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:16:19.525Z,1542240979.525 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:16:20.234Z,1542240980.234 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:16:20.234Z,1542240980.234 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-15T00:16:33.433Z,1542240993.433 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:16:33.433Z,1542240993.433 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-15T00:16:33.433Z,1542240993.433 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:16:33.498Z,1542240993.498 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:16:33.949Z,1542240993.949 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:16:34.658Z,1542240994.658 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:16:34.658Z,1542240994.658 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-15T00:16:45.428Z,1542241005.428 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:16:45.428Z,1542241005.428 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-15T00:16:45.428Z,1542241005.428 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:16:45.494Z,1542241005.494 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:16:45.494Z,1542241005.494 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-15T00:16:45.953Z,1542241005.953 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:17:49.910Z,1542241069.910 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:17:49.910Z,1542241069.910 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-11-15T00:17:49.910Z,1542241069.910 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:17:49.913Z,1542241069.913 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:17:49.913Z,1542241069.913 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-11-15T00:17:49.913Z,1542241069.913 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:17:49.960Z,1542241069.960 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:17:49.960Z,1542241069.960 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:17:50.321Z,1542241070.321 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:17:50.321Z,1542241070.321 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-11-15T00:17:50.322Z,1542241070.322 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:17:50.322Z,1542241070.322 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-11-15T00:17:50.660Z,1542241070.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:17:50.665Z,1542241070.665 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:17:50.665Z,1542241070.665 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:17:50.666Z,1542241070.666 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:17:50.666Z,1542241070.666 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:17:50.667Z,1542241070.667 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:18:08.962Z,1542241088.962 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T00:13:07.9Z
2018-11-15T00:18:08.962Z,1542241088.962 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T00:18:08.962Z,1542241088.962 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T00:18:13.809Z,1542241093.809 [DataOverHttps](INFO): Sending 76 bytes from file Logs/20181114T233847/Courier0013.lzma
2018-11-15T00:18:14.591Z,1542241094.591 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0013.lzma.bak
2018-11-15T00:18:14.591Z,1542241094.591 [DataOverHttps](INFO): SBD MOMSN=8876626
2018-11-15T00:18:23.460Z,1542241103.460 [DataOverHttps](INFO): Sending 413 bytes from file Logs/20181114T233847/Express0014.lzma
2018-11-15T00:18:24.259Z,1542241104.259 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0014.lzma.bak
2018-11-15T00:18:24.259Z,1542241104.259 [DataOverHttps](INFO): SBD MOMSN=8876630
2018-11-15T00:18:25.131Z,1542241105.131 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T00:18:25.132Z,1542241105.132 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T00:18:25.132Z,1542241105.132 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T00:18:29.589Z,1542241109.589 [RDI_Pathfinder](ERROR): Failed to parse:

2018-11-15T00:19:15.626Z,1542241155.626 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:19:15.626Z,1542241155.626 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-15T00:19:26.417Z,1542241166.417 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:19:26.417Z,1542241166.417 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-15T00:19:26.417Z,1542241166.417 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:19:26.438Z,1542241166.438 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:19:26.913Z,1542241166.913 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:19:27.663Z,1542241167.663 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:19:27.663Z,1542241167.663 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-15T00:19:39.151Z,1542241179.151 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:19:39.151Z,1542241179.151 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-15T00:19:39.151Z,1542241179.151 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:19:39.169Z,1542241179.169 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:19:39.405Z,1542241179.405 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:19:40.046Z,1542241180.046 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:19:40.046Z,1542241180.046 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-15T00:19:40.870Z,1542241180.870 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:19:40.870Z,1542241180.870 [AHRS_M2] No Fault, FailCount= 5
2018-11-15T00:19:41.177Z,1542241181.177 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:19:44.693Z,1542241184.693 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:45.109Z,1542241185.109 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:45.541Z,1542241185.541 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:45.941Z,1542241185.941 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:46.373Z,1542241186.373 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:46.793Z,1542241186.793 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:47.205Z,1542241187.205 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:47.617Z,1542241187.617 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:48.029Z,1542241188.029 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:48.453Z,1542241188.453 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:48.877Z,1542241188.877 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:49.297Z,1542241189.297 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:49.701Z,1542241189.701 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:50.125Z,1542241190.125 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:50.529Z,1542241190.529 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:50.565Z,1542241190.565 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:19:50.565Z,1542241190.565 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-15T00:19:50.565Z,1542241190.565 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:19:50.608Z,1542241190.608 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:19:50.608Z,1542241190.608 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-15T00:19:50.957Z,1542241190.957 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:51.109Z,1542241191.109 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:19:51.116Z,1542241191.116 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:19:51.116Z,1542241191.116 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-11-15T00:19:51.116Z,1542241191.116 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:19:51.118Z,1542241191.118 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:19:51.118Z,1542241191.118 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-11-15T00:19:51.118Z,1542241191.118 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:19:51.159Z,1542241191.159 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:19:51.160Z,1542241191.160 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:19:51.494Z,1542241191.494 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:51.494Z,1542241191.494 [AHRS_M2](FAULT): Failed to initialize within timeout.
2018-11-15T00:19:51.494Z,1542241191.494 [AHRS_M2] Communications Fault, FailCount= 1
2018-11-15T00:19:51.494Z,1542241191.494 [AHRS_M2](ERROR): Communications Fault
2018-11-15T00:19:51.609Z,1542241191.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:19:51.609Z,1542241191.609 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-11-15T00:19:51.610Z,1542241191.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:19:51.610Z,1542241191.610 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-11-15T00:19:51.610Z,1542241191.610 [CBIT](ERROR): Communications Fault in component: AHRS_M2
2018-11-15T00:19:51.626Z,1542241191.626 [AHRS_M2](INFO): Powering down
2018-11-15T00:19:51.748Z,1542241191.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:19:51.765Z,1542241191.765 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:19:51.765Z,1542241191.765 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:19:51.766Z,1542241191.766 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:19:51.766Z,1542241191.766 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:19:51.767Z,1542241191.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:19:55.287Z,1542241195.287 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:19:55.287Z,1542241195.287 [AHRS_M2] No Fault, FailCount= 1
2018-11-15T00:19:55.617Z,1542241195.617 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:19:59.133Z,1542241199.133 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:59.549Z,1542241199.549 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:19:59.969Z,1542241199.969 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:00.385Z,1542241200.385 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:00.797Z,1542241200.797 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:01.217Z,1542241201.217 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:01.629Z,1542241201.629 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:02.041Z,1542241202.041 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:02.445Z,1542241202.445 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:02.857Z,1542241202.857 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:03.273Z,1542241203.273 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:03.697Z,1542241203.697 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:04.125Z,1542241204.125 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:04.557Z,1542241204.557 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:04.969Z,1542241204.969 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:05.381Z,1542241205.381 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:05.801Z,1542241205.801 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:05.801Z,1542241205.801 [AHRS_M2](FAULT): Failed to initialize within timeout.
2018-11-15T00:20:05.801Z,1542241205.801 [AHRS_M2] Communications Fault, FailCount= 2
2018-11-15T00:20:05.801Z,1542241205.801 [AHRS_M2](ERROR): Communications Fault
2018-11-15T00:20:05.899Z,1542241205.899 [CBIT](ERROR): Communications Fault in component: AHRS_M2
2018-11-15T00:20:05.915Z,1542241205.915 [AHRS_M2](INFO): Powering down
2018-11-15T00:20:09.594Z,1542241209.594 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:20:09.594Z,1542241209.594 [AHRS_M2] No Fault, FailCount= 2
2018-11-15T00:20:09.913Z,1542241209.913 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:20:14.653Z,1542241214.653 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:15.065Z,1542241215.065 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:15.489Z,1542241215.489 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:15.905Z,1542241215.905 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:16.325Z,1542241216.325 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:16.769Z,1542241216.769 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:17.167Z,1542241217.167 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:17.585Z,1542241217.585 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:17.989Z,1542241217.989 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:18.401Z,1542241218.401 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:18.805Z,1542241218.805 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:19.221Z,1542241219.221 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:19.625Z,1542241219.625 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:20.061Z,1542241220.061 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:20.061Z,1542241220.061 [AHRS_M2](FAULT): Failed to initialize within timeout.
2018-11-15T00:20:20.061Z,1542241220.061 [AHRS_M2] Communications Fault, FailCount= 3
2018-11-15T00:20:20.061Z,1542241220.061 [AHRS_M2](ERROR): Communications Fault
2018-11-15T00:20:20.154Z,1542241220.154 [CBIT](ERROR): Communications Fault in component: AHRS_M2
2018-11-15T00:20:20.161Z,1542241220.161 [AHRS_M2](INFO): Powering down
2018-11-15T00:20:23.812Z,1542241223.812 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:20:23.812Z,1542241223.812 [AHRS_M2] No Fault, FailCount= 3
2018-11-15T00:20:24.162Z,1542241224.162 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:20:27.685Z,1542241227.685 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:28.113Z,1542241228.113 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:28.521Z,1542241228.521 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:28.957Z,1542241228.957 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:29.361Z,1542241229.361 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:29.757Z,1542241229.757 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:30.193Z,1542241230.193 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:30.601Z,1542241230.601 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:31.025Z,1542241231.025 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:31.445Z,1542241231.445 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:31.857Z,1542241231.857 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:32.265Z,1542241232.265 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:32.665Z,1542241232.665 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:33.073Z,1542241233.073 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:33.497Z,1542241233.497 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:33.917Z,1542241233.917 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:34.341Z,1542241234.341 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:34.341Z,1542241234.341 [AHRS_M2](FAULT): Failed to initialize within timeout.
2018-11-15T00:20:34.341Z,1542241234.341 [AHRS_M2] Communications Fault, FailCount= 4
2018-11-15T00:20:34.341Z,1542241234.341 [AHRS_M2](ERROR): Communications Fault
2018-11-15T00:20:34.459Z,1542241234.459 [CBIT](ERROR): Communications Fault in component: AHRS_M2
2018-11-15T00:20:34.472Z,1542241234.472 [AHRS_M2](INFO): Powering down
2018-11-15T00:20:38.126Z,1542241238.126 [CBIT](INFO): Clearing failed state for component AHRS_M2
2018-11-15T00:20:38.126Z,1542241238.126 [AHRS_M2] No Fault, FailCount= 4
2018-11-15T00:20:38.473Z,1542241238.473 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:20:41.986Z,1542241241.986 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:42.397Z,1542241242.397 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:42.813Z,1542241242.813 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:43.213Z,1542241243.213 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:43.637Z,1542241243.637 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:44.045Z,1542241244.045 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:44.473Z,1542241244.473 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:44.877Z,1542241244.877 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:45.301Z,1542241245.301 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:45.713Z,1542241245.713 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:46.129Z,1542241246.129 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:46.541Z,1542241246.541 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:46.961Z,1542241246.961 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:50.141Z,1542241250.141 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:20:50.141Z,1542241250.141 [AHRS_M2](FAULT): Failed to initialize within timeout.
2018-11-15T00:20:50.141Z,1542241250.141 [AHRS_M2] Communications Fault, FailCount= 5
2018-11-15T00:20:50.141Z,1542241250.141 [AHRS_M2](ERROR): Communications Fault
2018-11-15T00:20:50.216Z,1542241250.216 [CBIT](ERROR): Communications Fault in component: AHRS_M2
2018-11-15T00:20:50.216Z,1542241250.216 [CBIT](CRITICAL): Communications Fault in component: AHRS_M2
2018-11-15T00:20:50.229Z,1542241250.229 [AHRS_M2](INFO): Powering down
2018-11-15T00:20:50.365Z,1542241250.365 [CBIT](INFO): Critical error at 20181115T002050
2018-11-15T00:21:49.454Z,1542241309.454 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T00:21:49.455Z,1542241309.455 [NAL9602] Data Fault, FailCount= 4
2018-11-15T00:21:49.455Z,1542241309.455 [NAL9602](ERROR): Data Fault
2018-11-15T00:21:49.554Z,1542241309.554 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T00:21:49.848Z,1542241309.848 [NAL9602](INFO): Powering down
2018-11-15T00:21:50.718Z,1542241310.718 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T00:21:50.718Z,1542241310.718 [NAL9602] No Fault, FailCount= 4
2018-11-15T00:21:51.879Z,1542241311.879 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:21:51.879Z,1542241311.879 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-11-15T00:21:51.879Z,1542241311.879 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:21:51.880Z,1542241311.880 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:21:51.881Z,1542241311.881 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-11-15T00:21:51.881Z,1542241311.881 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:21:51.894Z,1542241311.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:21:51.894Z,1542241311.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:21:52.299Z,1542241312.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:21:52.299Z,1542241312.299 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-11-15T00:21:52.299Z,1542241312.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:21:52.299Z,1542241312.299 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-11-15T00:21:52.687Z,1542241312.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:21:52.687Z,1542241312.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:21:52.688Z,1542241312.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:21:52.688Z,1542241312.688 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:21:52.688Z,1542241312.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:21:52.689Z,1542241312.689 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:22:20.242Z,1542241340.242 [NAL9602](INFO): Powering up NAL9602
2018-11-15T00:22:20.695Z,1542241340.695 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:22:20.695Z,1542241340.695 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-15T00:22:31.043Z,1542241351.043 [NAL9602](INFO): NAL9602 initialized
2018-11-15T00:22:31.064Z,1542241351.064 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:22:31.064Z,1542241351.064 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-15T00:22:31.065Z,1542241351.065 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:22:31.112Z,1542241351.112 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:22:31.593Z,1542241351.593 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:22:32.305Z,1542241352.305 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:22:32.305Z,1542241352.305 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-15T00:22:38.058Z,1542241358.058 [CommandLine](IMPORTANT): got command failComponent
2018-11-15T00:22:38.058Z,1542241358.058 [CommandLine](IMPORTANT): Failed components:
2018-11-15T00:22:38.059Z,1542241358.059 [CommandLine](IMPORTANT): AHRS_M2: Communications Fault
2018-11-15T00:22:45.492Z,1542241365.492 [RDI_Pathfinder](ERROR): DVL BIT error. See manual. Result code: 32768
2018-11-15T00:22:45.493Z,1542241365.493 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-11-15T00:22:45.495Z,1542241365.495 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:22:45.495Z,1542241365.495 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-15T00:22:45.495Z,1542241365.495 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:22:45.517Z,1542241365.517 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:22:45.993Z,1542241365.993 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:22:46.717Z,1542241366.717 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:22:46.717Z,1542241366.717 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-15T00:22:57.103Z,1542241377.103 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:22:57.104Z,1542241377.104 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-15T00:22:57.104Z,1542241377.104 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:22:57.126Z,1542241377.126 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:22:57.126Z,1542241377.126 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-15T00:22:57.629Z,1542241377.629 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:23:22.170Z,1542241402.170 [CommandLine](IMPORTANT): got command failComponent none AHRS_M2
2018-11-15T00:23:22.171Z,1542241402.171 [AHRS_M2] No Fault, FailCount= 5
2018-11-15T00:23:22.171Z,1542241402.171 [CommandLine](IMPORTANT): AHRS_M2 failureMode is No Fault
2018-11-15T00:23:22.342Z,1542241402.342 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:23:25.861Z,1542241405.861 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:25.901Z,1542241405.901 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T00:23:25.901Z,1542241405.901 [Default:CheckIn:C.Wait] Stopped
2018-11-15T00:23:25.901Z,1542241405.901 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T00:23:25.901Z,1542241405.901 [Default:CheckIn:D] Running Loop=1
2018-11-15T00:23:26.269Z,1542241406.269 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:26.361Z,1542241406.361 [Default:CheckIn:D] Stopped
2018-11-15T00:23:26.361Z,1542241406.361 [Default:CheckIn:E] Running Loop=1
2018-11-15T00:23:26.749Z,1542241406.749 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:26.819Z,1542241406.819 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.460563 min 
2018-11-15T00:23:26.820Z,1542241406.820 [Default:CheckIn:E] Stopped
2018-11-15T00:23:26.820Z,1542241406.820 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T00:23:26.820Z,1542241406.820 [Default:CheckIn] Stopped
2018-11-15T00:23:26.820Z,1542241406.820 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T00:23:26.820Z,1542241406.820 [Default:CheckIn](INFO): Running loop #5
2018-11-15T00:23:26.820Z,1542241406.820 [Default:CheckIn] Running Loop=5
2018-11-15T00:23:26.820Z,1542241406.820 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T00:23:26.857Z,1542241406.857 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T00:23:27.221Z,1542241407.221 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:27.677Z,1542241407.677 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:28.093Z,1542241408.093 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:28.509Z,1542241408.509 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:28.949Z,1542241408.949 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:29.377Z,1542241409.377 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:29.817Z,1542241409.817 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:30.265Z,1542241410.265 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:30.661Z,1542241410.661 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:31.097Z,1542241411.097 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:31.242Z,1542241411.242 [CommandLine](IMPORTANT): got command get platform_pitch_angle degree
2018-11-15T00:23:31.242Z,1542241411.242 [CommandLine](FAULT): Element has no value
2018-11-15T00:23:31.521Z,1542241411.521 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:31.929Z,1542241411.929 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:32.338Z,1542241412.338 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:32.765Z,1542241412.765 [AHRS_M2](ERROR): Start data-stream UART error: serial timeout
2018-11-15T00:23:32.765Z,1542241412.765 [AHRS_M2](FAULT): Failed to initialize within timeout.
2018-11-15T00:23:32.765Z,1542241412.765 [AHRS_M2] Communications Fault, FailCount= 6
2018-11-15T00:23:32.765Z,1542241412.765 [AHRS_M2](ERROR): Communications Fault
2018-11-15T00:23:32.846Z,1542241412.846 [CBIT](ERROR): Communications Fault in component: AHRS_M2
2018-11-15T00:23:32.847Z,1542241412.847 [CBIT](CRITICAL): Communications Fault in component: AHRS_M2
2018-11-15T00:23:32.858Z,1542241412.858 [AHRS_M2](INFO): Powering down
2018-11-15T00:23:32.988Z,1542241412.988 [CBIT](INFO): Critical error at 20181115T002332
2018-11-15T00:23:52.909Z,1542241432.909 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:23:52.909Z,1542241432.909 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-11-15T00:23:52.909Z,1542241432.909 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:23:52.910Z,1542241432.910 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.
2018-11-15T00:23:52.911Z,1542241432.911 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-11-15T00:23:52.911Z,1542241432.911 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:23:52.923Z,1542241432.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:23:52.923Z,1542241432.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:23:53.325Z,1542241433.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:23:53.325Z,1542241433.325 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-11-15T00:23:53.325Z,1542241433.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:23:53.325Z,1542241433.325 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-11-15T00:23:53.708Z,1542241433.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:23:53.709Z,1542241433.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:23:53.709Z,1542241433.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:23:53.710Z,1542241433.710 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:23:53.710Z,1542241433.710 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:23:53.710Z,1542241433.710 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:24:01.274Z,1542241441.274 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-11-15T00:24:01.274Z,1542241441.274 [DropWeight] Hardware Fault, FailCount= 1
2018-11-15T00:24:01.274Z,1542241441.274 [DropWeight](ERROR): Hardware Fault
2018-11-15T00:24:01.374Z,1542241441.374 [CBIT](INFO): Critical error at 20181115T002401
2018-11-15T00:24:01.377Z,1542241441.377 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-11-15T00:24:01.377Z,1542241441.377 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-11-15T00:24:01.425Z,1542241441.425 [CommandLine](IMPORTANT): got command failComponent
2018-11-15T00:24:01.426Z,1542241441.426 [CommandLine](IMPORTANT): Failed components:
2018-11-15T00:24:01.426Z,1542241441.426 [CommandLine](IMPORTANT): AHRS_M2: Communications Fault
2018-11-15T00:24:01.426Z,1542241441.426 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2018-11-15T00:24:01.426Z,1542241441.426 [CommandLine](IMPORTANT): Aanderaa_O2: Communications Fault
2018-11-15T00:24:01.727Z,1542241441.727 [CBIT](INFO): Critical error at 20181115T002401
2018-11-15T00:24:05.570Z,1542241445.570 [CommandLine](IMPORTANT): got command failComponent none AHRS_M2
2018-11-15T00:24:05.571Z,1542241445.571 [AHRS_M2] No Fault, FailCount= 6
2018-11-15T00:24:05.571Z,1542241445.571 [CommandLine](IMPORTANT): AHRS_M2 failureMode is No Fault
2018-11-15T00:24:05.670Z,1542241445.670 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-11-15T00:24:09.058Z,1542241449.058 [CommandLine](IMPORTANT): got command get platform_pitch_angle degree
2018-11-15T00:24:09.059Z,1542241449.059 [CommandLine](IMPORTANT): platform_pitch_angle -2.124127 arcdeg
2018-11-15T00:24:10.072Z,1542241450.072 [AHRS_M2](INFO): Failure count cleared after critical for AHRS_M2
2018-11-15T00:24:12.019Z,1542241452.019 [CommandLine](IMPORTANT): got command get platform_pitch_angle degree
2018-11-15T00:24:12.019Z,1542241452.019 [CommandLine](IMPORTANT): platform_pitch_angle -2.361413 arcdeg
2018-11-15T00:24:14.763Z,1542241454.763 [CommandLine](IMPORTANT): got command get platform_pitch_angle degree
2018-11-15T00:24:14.763Z,1542241454.763 [CommandLine](IMPORTANT): platform_pitch_angle -2.320486 arcdeg
2018-11-15T00:24:19.467Z,1542241459.467 [CommandLine](IMPORTANT): got command get platform_orientation degree
2018-11-15T00:24:19.468Z,1542241459.468 [CommandLine](IMPORTANT): platform_orientation 247.659681 arcdeg
2018-11-15T00:24:26.306Z,1542241466.306 [CommandLine](IMPORTANT): got command get platform_roll_angle degree
2018-11-15T00:24:26.307Z,1542241466.307 [CommandLine](IMPORTANT): platform_roll_angle 0.079409 arcdeg
2018-11-15T00:25:20.434Z,1542241520.434 [CommandLine](IMPORTANT): got command get platform_orientation degree
2018-11-15T00:25:20.435Z,1542241520.435 [CommandLine](IMPORTANT): platform_orientation 259.716823 arcdeg
2018-11-15T00:25:27.163Z,1542241527.163 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:25:27.163Z,1542241527.163 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-15T00:25:29.450Z,1542241529.450 [CommandLine](IMPORTANT): got command get platform_pitch_angle degree
2018-11-15T00:25:29.451Z,1542241529.451 [CommandLine](IMPORTANT): platform_pitch_angle -2.292584 arcdeg
2018-11-15T00:25:37.674Z,1542241537.674 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:25:37.674Z,1542241537.674 [Aanderaa_O2] Communications Fault, FailCount= 1
2018-11-15T00:25:37.674Z,1542241537.674 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:25:37.731Z,1542241537.731 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:25:38.193Z,1542241538.193 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:25:38.911Z,1542241538.911 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:25:38.911Z,1542241538.911 [Aanderaa_O2] No Fault, FailCount= 1
2018-11-15T00:25:49.279Z,1542241549.279 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:25:49.279Z,1542241549.279 [Aanderaa_O2] Communications Fault, FailCount= 2
2018-11-15T00:25:49.279Z,1542241549.279 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:25:49.326Z,1542241549.326 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:25:49.813Z,1542241549.813 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:25:50.516Z,1542241550.516 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:25:50.517Z,1542241550.517 [Aanderaa_O2] No Fault, FailCount= 2
2018-11-15T00:26:01.292Z,1542241561.292 [Aanderaa_O2](FAULT): Failed to initialize within timeout.
2018-11-15T00:26:01.292Z,1542241561.292 [Aanderaa_O2] Communications Fault, FailCount= 3
2018-11-15T00:26:01.292Z,1542241561.292 [Aanderaa_O2](ERROR): Communications Fault
2018-11-15T00:26:01.343Z,1542241561.343 [CBIT](ERROR): Communications Fault in component: Aanderaa_O2
2018-11-15T00:26:01.344Z,1542241561.344 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2018-11-15T00:26:01.797Z,1542241561.797 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:26:53.886Z,1542241613.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:26:53.887Z,1542241613.887 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-11-15T00:26:53.887Z,1542241613.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:26:53.888Z,1542241613.888 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:26:53.889Z,1542241613.889 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-11-15T00:26:53.889Z,1542241613.889 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:26:53.901Z,1542241613.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:26:53.901Z,1542241613.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:26:54.305Z,1542241614.305 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:26:54.305Z,1542241614.305 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-11-15T00:26:54.306Z,1542241614.306 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:26:54.306Z,1542241614.306 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-11-15T00:26:54.673Z,1542241614.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:26:54.674Z,1542241614.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:26:54.674Z,1542241614.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:26:54.676Z,1542241614.676 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:26:54.681Z,1542241614.681 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:26:54.682Z,1542241614.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:28:28.507Z,1542241708.507 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T00:23:26.9Z
2018-11-15T00:28:28.507Z,1542241708.507 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T00:28:28.507Z,1542241708.507 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T00:28:33.433Z,1542241713.433 [CBIT](INFO): Clearing failed state for component Aanderaa_O2
2018-11-15T00:28:33.433Z,1542241713.433 [Aanderaa_O2] No Fault, FailCount= 3
2018-11-15T00:28:33.479Z,1542241713.479 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20181114T233847/Courier0016.lzma
2018-11-15T00:28:34.246Z,1542241714.246 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0016.lzma.bak
2018-11-15T00:28:34.246Z,1542241714.246 [DataOverHttps](INFO): SBD MOMSN=8876719
2018-11-15T00:28:39.061Z,1542241719.061 [Aanderaa_O2](INFO): Powering down
2018-11-15T00:28:43.422Z,1542241723.422 [DataOverHttps](INFO): Sending 725 bytes from file Logs/20181114T233847/Express0017.lzma
2018-11-15T00:28:44.202Z,1542241724.202 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0017.lzma.bak
2018-11-15T00:28:44.202Z,1542241724.202 [DataOverHttps](INFO): SBD MOMSN=8876725
2018-11-15T00:28:45.004Z,1542241725.004 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T00:28:45.004Z,1542241725.004 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T00:28:45.004Z,1542241725.004 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T00:28:47.493Z,1542241727.493 [CommandLine](IMPORTANT): got command failComponent
2018-11-15T00:28:47.494Z,1542241727.494 [CommandLine](IMPORTANT): Failed components:
2018-11-15T00:28:47.494Z,1542241727.494 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2018-11-15T00:29:54.901Z,1542241794.901 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:29:54.901Z,1542241794.901 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-11-15T00:29:54.901Z,1542241794.901 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:29:54.903Z,1542241794.903 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:29:54.903Z,1542241794.903 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-11-15T00:29:54.903Z,1542241794.903 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:29:54.915Z,1542241794.915 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:29:54.915Z,1542241794.915 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:29:55.305Z,1542241795.305 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:29:55.305Z,1542241795.305 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-11-15T00:29:55.306Z,1542241795.306 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:29:55.306Z,1542241795.306 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-11-15T00:29:55.685Z,1542241795.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:29:55.686Z,1542241795.686 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:29:55.686Z,1542241795.686 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:29:55.686Z,1542241795.686 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:29:55.687Z,1542241795.687 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:29:55.687Z,1542241795.687 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:32:32.442Z,1542241952.442 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T00:32:32.442Z,1542241952.442 [NAL9602] Data Fault, FailCount= 5
2018-11-15T00:32:32.442Z,1542241952.442 [NAL9602](ERROR): Data Fault
2018-11-15T00:32:32.518Z,1542241952.518 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T00:32:32.519Z,1542241952.519 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-11-15T00:32:32.842Z,1542241952.842 [NAL9602](INFO): Powering down
2018-11-15T00:32:32.909Z,1542241952.909 [CBIT](INFO): Critical error at 20181115T003232
2018-11-15T00:32:55.779Z,1542241975.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:32:55.779Z,1542241975.779 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-11-15T00:32:55.779Z,1542241975.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:32:55.781Z,1542241975.781 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:32:55.782Z,1542241975.782 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-11-15T00:32:55.782Z,1542241975.782 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:32:55.805Z,1542241975.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:32:55.805Z,1542241975.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:32:56.181Z,1542241976.181 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:32:56.181Z,1542241976.181 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-11-15T00:32:56.182Z,1542241976.182 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:32:56.182Z,1542241976.182 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-11-15T00:32:56.540Z,1542241976.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:32:56.540Z,1542241976.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:32:56.541Z,1542241976.541 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:32:56.541Z,1542241976.541 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:32:56.542Z,1542241976.542 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:32:56.542Z,1542241976.542 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:33:45.161Z,1542242025.161 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T00:33:45.161Z,1542242025.161 [Default:CheckIn:C.Wait] Stopped
2018-11-15T00:33:45.161Z,1542242025.161 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T00:33:45.161Z,1542242025.161 [Default:CheckIn:D] Running Loop=1
2018-11-15T00:33:45.541Z,1542242025.541 [Default:CheckIn:D] Stopped
2018-11-15T00:33:45.541Z,1542242025.541 [Default:CheckIn:E] Running Loop=1
2018-11-15T00:33:45.945Z,1542242025.945 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 51.780229 min 
2018-11-15T00:33:45.945Z,1542242025.945 [Default:CheckIn:E] Stopped
2018-11-15T00:33:45.945Z,1542242025.945 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T00:33:45.945Z,1542242025.945 [Default:CheckIn] Stopped
2018-11-15T00:33:45.945Z,1542242025.945 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T00:33:45.946Z,1542242025.946 [Default:CheckIn](INFO): Running loop #6
2018-11-15T00:33:45.946Z,1542242025.946 [Default:CheckIn] Running Loop=6
2018-11-15T00:33:45.946Z,1542242025.946 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T00:33:45.946Z,1542242025.946 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T00:34:32.511Z,1542242072.511 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T00:34:32.511Z,1542242072.511 [NAL9602] No Fault, FailCount= 5
2018-11-15T00:34:32.834Z,1542242072.834 [NAL9602](INFO): Powering up NAL9602
2018-11-15T00:34:43.738Z,1542242083.738 [NAL9602](INFO): NAL9602 initialized
2018-11-15T00:35:56.922Z,1542242156.922 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:35:56.922Z,1542242156.922 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-11-15T00:35:56.922Z,1542242156.922 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:35:56.924Z,1542242156.924 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:35:56.924Z,1542242156.924 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-11-15T00:35:56.924Z,1542242156.924 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:35:56.937Z,1542242156.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:35:56.937Z,1542242156.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:35:57.341Z,1542242157.341 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:35:57.341Z,1542242157.341 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-11-15T00:35:57.342Z,1542242157.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:35:57.342Z,1542242157.342 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-11-15T00:35:57.696Z,1542242157.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:35:57.696Z,1542242157.696 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:35:57.697Z,1542242157.697 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:35:57.697Z,1542242157.697 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:35:57.698Z,1542242157.698 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:35:57.698Z,1542242157.698 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:38:48.219Z,1542242328.219 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T00:33:45.9Z
2018-11-15T00:38:48.219Z,1542242328.219 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T00:38:48.219Z,1542242328.219 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T00:38:53.324Z,1542242333.324 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181114T233847/Courier0019.lzma
2018-11-15T00:38:54.131Z,1542242334.131 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0019.lzma.bak
2018-11-15T00:38:54.131Z,1542242334.131 [DataOverHttps](INFO): SBD MOMSN=8876840
2018-11-15T00:38:58.324Z,1542242338.324 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:38:58.324Z,1542242338.324 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-11-15T00:38:58.324Z,1542242338.324 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:38:58.342Z,1542242338.342 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:38:58.342Z,1542242338.342 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-11-15T00:38:58.342Z,1542242338.342 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:38:58.367Z,1542242338.367 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:38:58.367Z,1542242338.367 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:38:58.477Z,1542242338.477 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:38:58.477Z,1542242338.477 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-11-15T00:38:58.478Z,1542242338.478 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:38:58.478Z,1542242338.478 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-11-15T00:38:58.826Z,1542242338.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:38:58.826Z,1542242338.826 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:38:58.827Z,1542242338.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:38:58.827Z,1542242338.827 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:38:58.827Z,1542242338.827 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:38:58.828Z,1542242338.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:39:03.422Z,1542242343.422 [CBIT](INFO): Clearing failed state for component DropWeight
2018-11-15T00:39:03.422Z,1542242343.422 [DropWeight] No Fault, FailCount= 1
2018-11-15T00:39:03.456Z,1542242343.456 [DataOverHttps](INFO): Sending 205 bytes from file Logs/20181114T233847/Express0020.lzma
2018-11-15T00:39:04.242Z,1542242344.242 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0020.lzma.bak
2018-11-15T00:39:04.242Z,1542242344.242 [DataOverHttps](INFO): SBD MOMSN=8876843
2018-11-15T00:39:05.052Z,1542242345.052 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T00:39:05.052Z,1542242345.052 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T00:39:05.052Z,1542242345.052 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T00:41:58.895Z,1542242518.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:41:58.895Z,1542242518.895 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-11-15T00:41:58.895Z,1542242518.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:41:58.897Z,1542242518.897 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:41:58.897Z,1542242518.897 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-11-15T00:41:58.898Z,1542242518.898 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:41:58.934Z,1542242518.934 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:41:58.934Z,1542242518.934 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:41:59.325Z,1542242519.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:41:59.325Z,1542242519.325 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-11-15T00:41:59.326Z,1542242519.326 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:41:59.326Z,1542242519.326 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-11-15T00:41:59.710Z,1542242519.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:41:59.710Z,1542242519.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:41:59.711Z,1542242519.711 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:41:59.711Z,1542242519.711 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:41:59.711Z,1542242519.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:41:59.712Z,1542242519.712 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:44:05.301Z,1542242645.301 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T00:44:05.301Z,1542242645.301 [Default:CheckIn:C.Wait] Stopped
2018-11-15T00:44:05.301Z,1542242645.301 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T00:44:05.302Z,1542242645.302 [Default:CheckIn:D] Running Loop=1
2018-11-15T00:44:05.673Z,1542242645.673 [Default:CheckIn:D] Stopped
2018-11-15T00:44:05.673Z,1542242645.673 [Default:CheckIn:E] Running Loop=1
2018-11-15T00:44:06.143Z,1542242646.143 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.115751 min 
2018-11-15T00:44:06.143Z,1542242646.143 [Default:CheckIn:E] Stopped
2018-11-15T00:44:06.143Z,1542242646.143 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T00:44:06.143Z,1542242646.143 [Default:CheckIn] Stopped
2018-11-15T00:44:06.143Z,1542242646.143 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T00:44:06.144Z,1542242646.144 [Default:CheckIn](INFO): Running loop #7
2018-11-15T00:44:06.144Z,1542242646.144 [Default:CheckIn] Running Loop=7
2018-11-15T00:44:06.144Z,1542242646.144 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T00:44:06.144Z,1542242646.144 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T00:44:47.039Z,1542242687.039 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T00:44:47.039Z,1542242687.039 [NAL9602] Data Fault, FailCount= 1
2018-11-15T00:44:47.039Z,1542242687.039 [NAL9602](ERROR): Data Fault
2018-11-15T00:44:47.111Z,1542242687.111 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T00:44:47.438Z,1542242687.438 [NAL9602](INFO): Powering down
2018-11-15T00:44:48.331Z,1542242688.331 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T00:44:48.331Z,1542242688.331 [NAL9602] No Fault, FailCount= 1
2018-11-15T00:45:01.588Z,1542242701.588 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:45:01.588Z,1542242701.588 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-11-15T00:45:01.588Z,1542242701.588 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:45:01.590Z,1542242701.590 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:45:01.590Z,1542242701.590 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-11-15T00:45:01.590Z,1542242701.590 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:45:01.602Z,1542242701.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:45:01.602Z,1542242701.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:45:01.729Z,1542242701.729 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:45:01.733Z,1542242701.733 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-11-15T00:45:01.733Z,1542242701.733 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:45:01.733Z,1542242701.733 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-11-15T00:45:02.053Z,1542242702.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:45:02.054Z,1542242702.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:45:02.054Z,1542242702.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:45:02.054Z,1542242702.054 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:45:02.055Z,1542242702.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:45:02.055Z,1542242702.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:45:17.618Z,1542242717.618 [NAL9602](INFO): Powering up NAL9602
2018-11-15T00:45:28.818Z,1542242728.818 [NAL9602](INFO): NAL9602 initialized
2018-11-15T00:48:02.412Z,1542242882.412 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:48:02.412Z,1542242882.412 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-11-15T00:48:02.412Z,1542242882.412 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:48:02.414Z,1542242882.414 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:48:02.414Z,1542242882.414 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-11-15T00:48:02.414Z,1542242882.414 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:48:02.451Z,1542242882.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:48:02.451Z,1542242882.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:48:02.818Z,1542242882.818 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:48:02.818Z,1542242882.818 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-11-15T00:48:02.818Z,1542242882.818 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:48:02.818Z,1542242882.818 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-11-15T00:48:03.223Z,1542242883.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:48:03.224Z,1542242883.224 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:48:03.224Z,1542242883.224 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:48:03.225Z,1542242883.225 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:48:03.225Z,1542242883.225 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:48:03.226Z,1542242883.226 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:49:08.347Z,1542242948.347 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T00:44:06.1Z
2018-11-15T00:49:08.347Z,1542242948.347 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T00:49:08.347Z,1542242948.347 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T00:49:13.452Z,1542242953.452 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0022.lzma
2018-11-15T00:49:14.214Z,1542242954.214 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0022.lzma.bak
2018-11-15T00:49:14.214Z,1542242954.214 [DataOverHttps](INFO): SBD MOMSN=8876917
2018-11-15T00:49:23.649Z,1542242963.649 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20181114T233847/Express0023.lzma
2018-11-15T00:49:24.443Z,1542242964.443 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0023.lzma.bak
2018-11-15T00:49:24.443Z,1542242964.443 [DataOverHttps](INFO): SBD MOMSN=8876919
2018-11-15T00:49:25.300Z,1542242965.300 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T00:49:25.300Z,1542242965.300 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T00:49:25.301Z,1542242965.301 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T00:51:03.338Z,1542243063.338 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:51:03.338Z,1542243063.338 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-11-15T00:51:03.338Z,1542243063.338 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:51:03.340Z,1542243063.340 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:51:03.340Z,1542243063.340 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-11-15T00:51:03.340Z,1542243063.340 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:51:03.365Z,1542243063.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:51:03.366Z,1542243063.366 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:51:03.719Z,1542243063.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:51:03.719Z,1542243063.719 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-11-15T00:51:03.719Z,1542243063.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:51:03.720Z,1542243063.720 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-11-15T00:51:04.155Z,1542243064.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:51:04.156Z,1542243064.156 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:51:04.156Z,1542243064.156 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:51:04.165Z,1542243064.165 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:51:04.165Z,1542243064.165 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:51:04.165Z,1542243064.165 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:52:16.148Z,1542243136.148 [BPC1](ERROR): BPC1B: No match for serial number FFFF in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).
2018-11-15T00:53:52.719Z,1542243232.719 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-11-15T00:54:04.330Z,1542243244.330 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:54:04.330Z,1542243244.330 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-11-15T00:54:04.330Z,1542243244.330 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:54:04.332Z,1542243244.332 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:54:04.332Z,1542243244.332 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-11-15T00:54:04.332Z,1542243244.332 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:54:04.344Z,1542243244.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:54:04.345Z,1542243244.345 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:54:04.745Z,1542243244.745 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:54:04.746Z,1542243244.746 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-11-15T00:54:04.746Z,1542243244.746 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:54:04.746Z,1542243244.746 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-11-15T00:54:05.148Z,1542243245.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:54:05.148Z,1542243245.148 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:54:05.149Z,1542243245.149 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:54:05.149Z,1542243245.149 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:54:05.150Z,1542243245.150 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:54:05.150Z,1542243245.150 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:54:25.711Z,1542243265.711 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T00:54:25.712Z,1542243265.712 [Default:CheckIn:C.Wait] Stopped
2018-11-15T00:54:25.712Z,1542243265.712 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T00:54:25.712Z,1542243265.712 [Default:CheckIn:D] Running Loop=1
2018-11-15T00:54:26.138Z,1542243266.138 [Default:CheckIn:D] Stopped
2018-11-15T00:54:26.138Z,1542243266.138 [Default:CheckIn:E] Running Loop=1
2018-11-15T00:54:26.522Z,1542243266.522 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.456844 min 
2018-11-15T00:54:26.522Z,1542243266.522 [Default:CheckIn:E] Stopped
2018-11-15T00:54:26.522Z,1542243266.522 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T00:54:26.522Z,1542243266.522 [Default:CheckIn] Stopped
2018-11-15T00:54:26.522Z,1542243266.522 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T00:54:26.523Z,1542243266.523 [Default:CheckIn](INFO): Running loop #8
2018-11-15T00:54:26.523Z,1542243266.523 [Default:CheckIn] Running Loop=8
2018-11-15T00:54:26.523Z,1542243266.523 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T00:54:26.523Z,1542243266.523 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T00:55:29.683Z,1542243329.683 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T00:55:29.683Z,1542243329.683 [NAL9602] Data Fault, FailCount= 2
2018-11-15T00:55:29.683Z,1542243329.683 [NAL9602](ERROR): Data Fault
2018-11-15T00:55:29.756Z,1542243329.756 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T00:55:30.086Z,1542243330.086 [NAL9602](INFO): Powering down
2018-11-15T00:55:30.947Z,1542243330.947 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T00:55:30.947Z,1542243330.947 [NAL9602] No Fault, FailCount= 2
2018-11-15T00:56:00.279Z,1542243360.279 [NAL9602](INFO): Powering up NAL9602
2018-11-15T00:56:11.116Z,1542243371.116 [NAL9602](INFO): NAL9602 initialized
2018-11-15T00:57:06.610Z,1542243426.610 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:57:06.610Z,1542243426.610 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-11-15T00:57:06.610Z,1542243426.610 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T00:57:06.612Z,1542243426.612 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T00:57:06.612Z,1542243426.612 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-11-15T00:57:06.612Z,1542243426.612 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T00:57:06.624Z,1542243426.624 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T00:57:06.641Z,1542243426.641 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T00:57:06.734Z,1542243426.734 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T00:57:06.734Z,1542243426.734 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-11-15T00:57:06.734Z,1542243426.734 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T00:57:06.734Z,1542243426.734 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-11-15T00:57:07.118Z,1542243427.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T00:57:07.119Z,1542243427.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:57:07.119Z,1542243427.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:57:07.119Z,1542243427.119 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T00:57:07.120Z,1542243427.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T00:57:07.120Z,1542243427.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T00:59:27.394Z,1542243567.394 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T00:54:26.5Z
2018-11-15T00:59:27.394Z,1542243567.394 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T00:59:27.394Z,1542243567.394 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T00:59:32.451Z,1542243572.451 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181114T233847/Courier0025.lzma
2018-11-15T00:59:33.230Z,1542243573.230 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0025.lzma.bak
2018-11-15T00:59:33.230Z,1542243573.230 [DataOverHttps](INFO): SBD MOMSN=8876981
2018-11-15T00:59:42.479Z,1542243582.479 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20181114T233847/Express0026.lzma
2018-11-15T00:59:43.262Z,1542243583.262 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0026.lzma.bak
2018-11-15T00:59:43.262Z,1542243583.262 [DataOverHttps](INFO): SBD MOMSN=8876983
2018-11-15T00:59:44.131Z,1542243584.131 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T00:59:44.131Z,1542243584.131 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T00:59:44.131Z,1542243584.131 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T01:00:07.207Z,1542243607.207 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:00:07.208Z,1542243607.208 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-11-15T01:00:07.208Z,1542243607.208 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:00:07.210Z,1542243607.210 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:00:07.210Z,1542243607.210 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-11-15T01:00:07.210Z,1542243607.210 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:00:07.222Z,1542243607.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:00:07.222Z,1542243607.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:00:07.621Z,1542243607.621 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:00:07.621Z,1542243607.621 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-11-15T01:00:07.622Z,1542243607.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:00:07.622Z,1542243607.622 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-11-15T01:00:08.004Z,1542243608.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:00:08.004Z,1542243608.004 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:00:08.005Z,1542243608.005 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:00:08.005Z,1542243608.005 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:00:08.006Z,1542243608.006 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:00:08.006Z,1542243608.006 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:03:08.078Z,1542243788.078 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:03:08.078Z,1542243788.078 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-11-15T01:03:08.079Z,1542243788.079 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:03:08.080Z,1542243788.080 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:03:08.080Z,1542243788.080 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-11-15T01:03:08.081Z,1542243788.081 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:03:08.105Z,1542243788.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:03:08.105Z,1542243788.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:03:08.490Z,1542243788.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:03:08.490Z,1542243788.490 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-11-15T01:03:08.490Z,1542243788.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:03:08.490Z,1542243788.490 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-11-15T01:03:08.875Z,1542243788.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:03:08.876Z,1542243788.876 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:03:08.876Z,1542243788.876 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:03:08.877Z,1542243788.877 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:03:08.877Z,1542243788.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:03:08.877Z,1542243788.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:04:44.271Z,1542243884.271 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T01:04:44.271Z,1542243884.271 [Default:CheckIn:C.Wait] Stopped
2018-11-15T01:04:44.272Z,1542243884.272 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T01:04:44.272Z,1542243884.272 [Default:CheckIn:D] Running Loop=1
2018-11-15T01:04:44.657Z,1542243884.657 [Default:CheckIn:D] Stopped
2018-11-15T01:04:44.657Z,1542243884.657 [Default:CheckIn:E] Running Loop=1
2018-11-15T01:04:45.090Z,1542243885.090 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 82.765422 min 
2018-11-15T01:04:45.091Z,1542243885.091 [Default:CheckIn:E] Stopped
2018-11-15T01:04:45.091Z,1542243885.091 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T01:04:45.091Z,1542243885.091 [Default:CheckIn] Stopped
2018-11-15T01:04:45.091Z,1542243885.091 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T01:04:45.091Z,1542243885.091 [Default:CheckIn](INFO): Running loop #9
2018-11-15T01:04:45.091Z,1542243885.091 [Default:CheckIn] Running Loop=9
2018-11-15T01:04:45.091Z,1542243885.091 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T01:04:45.091Z,1542243885.091 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T01:06:09.150Z,1542243969.150 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:06:09.150Z,1542243969.150 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-11-15T01:06:09.151Z,1542243969.151 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:06:09.152Z,1542243969.152 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:06:09.152Z,1542243969.152 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-11-15T01:06:09.157Z,1542243969.157 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:06:09.182Z,1542243969.182 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:06:09.182Z,1542243969.182 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:06:09.589Z,1542243969.589 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:06:09.589Z,1542243969.589 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-11-15T01:06:09.590Z,1542243969.590 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:06:09.590Z,1542243969.590 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-11-15T01:06:09.965Z,1542243969.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:06:09.965Z,1542243969.965 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:06:09.966Z,1542243969.966 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:06:09.966Z,1542243969.966 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:06:09.967Z,1542243969.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:06:09.967Z,1542243969.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:06:12.319Z,1542243972.319 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T01:06:12.319Z,1542243972.319 [NAL9602] Data Fault, FailCount= 3
2018-11-15T01:06:12.319Z,1542243972.319 [NAL9602](ERROR): Data Fault
2018-11-15T01:06:12.396Z,1542243972.396 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T01:06:15.496Z,1542243975.496 [NAL9602](INFO): Powering down
2018-11-15T01:06:16.091Z,1542243976.091 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T01:06:16.091Z,1542243976.091 [NAL9602] No Fault, FailCount= 3
2018-11-15T01:06:45.615Z,1542244005.615 [NAL9602](INFO): Powering up NAL9602
2018-11-15T01:06:56.730Z,1542244016.730 [NAL9602](INFO): NAL9602 initialized
2018-11-15T01:09:04.294Z,1542244144.294 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-11-15T01:09:04.294Z,1542244144.294 [DropWeight] Hardware Fault, FailCount= 1
2018-11-15T01:09:04.294Z,1542244144.294 [DropWeight](ERROR): Hardware Fault
2018-11-15T01:09:04.367Z,1542244144.367 [CBIT](INFO): Critical error at 20181115T010904
2018-11-15T01:09:04.374Z,1542244144.374 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-11-15T01:09:04.374Z,1542244144.374 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-11-15T01:09:04.753Z,1542244144.753 [CBIT](INFO): Critical error at 20181115T010904
2018-11-15T01:09:11.928Z,1542244151.928 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:09:11.928Z,1542244151.928 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-11-15T01:09:11.928Z,1542244151.928 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:09:11.930Z,1542244151.930 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:09:11.930Z,1542244151.930 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-11-15T01:09:11.930Z,1542244151.930 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:09:11.967Z,1542244151.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:09:11.967Z,1542244151.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:09:12.106Z,1542244152.106 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:09:12.106Z,1542244152.106 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-11-15T01:09:12.106Z,1542244152.106 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:09:12.106Z,1542244152.106 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-11-15T01:09:12.442Z,1542244152.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:09:12.443Z,1542244152.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:09:12.443Z,1542244152.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:09:12.443Z,1542244152.443 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:09:12.444Z,1542244152.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:09:12.444Z,1542244152.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:09:47.237Z,1542244187.237 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T01:04:45.1Z
2018-11-15T01:09:47.237Z,1542244187.237 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T01:09:47.237Z,1542244187.237 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T01:09:52.183Z,1542244192.183 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181114T233847/Courier0028.lzma
2018-11-15T01:09:52.962Z,1542244192.962 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0028.lzma.bak
2018-11-15T01:09:52.962Z,1542244192.962 [DataOverHttps](INFO): SBD MOMSN=8877050
2018-11-15T01:10:02.038Z,1542244202.038 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20181114T233847/Express0029.lzma
2018-11-15T01:10:02.802Z,1542244202.802 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0029.lzma.bak
2018-11-15T01:10:02.802Z,1542244202.802 [DataOverHttps](INFO): SBD MOMSN=8877054
2018-11-15T01:10:03.627Z,1542244203.627 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T01:10:03.627Z,1542244203.627 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T01:10:03.627Z,1542244203.627 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T01:10:08.426Z,1542244208.426 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-11-15T01:12:09.439Z,1542244329.439 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-11-15T01:12:09.439Z,1542244329.439 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +     +0.00,        +0.00,   0.00,5576.61
2018-11-15T01:12:12.677Z,1542244332.677 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:12:12.678Z,1542244332.678 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-11-15T01:12:12.678Z,1542244332.678 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:12:12.679Z,1542244332.679 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:12:12.680Z,1542244332.680 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-11-15T01:12:12.680Z,1542244332.680 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:12:12.733Z,1542244332.733 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:12:12.734Z,1542244332.734 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:12:13.051Z,1542244333.051 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:12:13.051Z,1542244333.051 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-11-15T01:12:13.052Z,1542244333.052 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:12:13.052Z,1542244333.052 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-11-15T01:12:13.431Z,1542244333.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:12:13.431Z,1542244333.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:12:13.431Z,1542244333.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:12:13.432Z,1542244333.432 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:12:13.432Z,1542244333.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:12:13.437Z,1542244333.437 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:14:15.323Z,1542244455.323 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-11-15T01:15:03.768Z,1542244503.768 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T01:15:03.768Z,1542244503.768 [Default:CheckIn:C.Wait] Stopped
2018-11-15T01:15:03.768Z,1542244503.768 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T01:15:03.768Z,1542244503.768 [Default:CheckIn:D] Running Loop=1
2018-11-15T01:15:04.184Z,1542244504.184 [Default:CheckIn:D] Stopped
2018-11-15T01:15:04.184Z,1542244504.184 [Default:CheckIn:E] Running Loop=1
2018-11-15T01:15:04.582Z,1542244504.582 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 93.090942 min 
2018-11-15T01:15:04.582Z,1542244504.582 [Default:CheckIn:E] Stopped
2018-11-15T01:15:04.582Z,1542244504.582 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T01:15:04.582Z,1542244504.582 [Default:CheckIn] Stopped
2018-11-15T01:15:04.582Z,1542244504.582 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T01:15:04.583Z,1542244504.583 [Default:CheckIn](INFO): Running loop #10
2018-11-15T01:15:04.583Z,1542244504.583 [Default:CheckIn] Running Loop=10
2018-11-15T01:15:04.583Z,1542244504.583 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T01:15:04.583Z,1542244504.583 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T01:15:13.790Z,1542244513.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:15:13.790Z,1542244513.790 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-11-15T01:15:13.790Z,1542244513.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:15:13.791Z,1542244513.791 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:15:13.792Z,1542244513.792 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-11-15T01:15:13.792Z,1542244513.792 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:15:13.804Z,1542244513.804 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:15:13.805Z,1542244513.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:15:14.231Z,1542244514.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:15:14.231Z,1542244514.231 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-11-15T01:15:14.231Z,1542244514.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:15:14.231Z,1542244514.231 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-11-15T01:15:14.579Z,1542244514.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:15:14.579Z,1542244514.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:15:14.579Z,1542244514.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:15:14.580Z,1542244514.580 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:15:14.580Z,1542244514.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:15:14.581Z,1542244514.581 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:16:57.554Z,1542244617.554 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T01:16:57.554Z,1542244617.554 [NAL9602] Data Fault, FailCount= 4
2018-11-15T01:16:57.554Z,1542244617.554 [NAL9602](ERROR): Data Fault
2018-11-15T01:16:57.616Z,1542244617.616 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T01:16:57.954Z,1542244617.954 [NAL9602](INFO): Powering down
2018-11-15T01:16:58.794Z,1542244618.794 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T01:16:58.795Z,1542244618.795 [NAL9602] No Fault, FailCount= 4
2018-11-15T01:17:27.970Z,1542244647.970 [NAL9602](INFO): Powering up NAL9602
2018-11-15T01:17:39.166Z,1542244659.166 [NAL9602](INFO): NAL9602 initialized
2018-11-15T01:18:14.886Z,1542244694.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:18:14.886Z,1542244694.886 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-11-15T01:18:14.886Z,1542244694.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:18:14.888Z,1542244694.888 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:18:14.888Z,1542244694.888 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-11-15T01:18:14.888Z,1542244694.888 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:18:14.900Z,1542244694.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:18:14.901Z,1542244694.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:18:15.334Z,1542244695.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:18:15.334Z,1542244695.334 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-11-15T01:18:15.334Z,1542244695.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:18:15.334Z,1542244695.334 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-11-15T01:18:15.693Z,1542244695.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:18:15.693Z,1542244695.693 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:18:15.694Z,1542244695.694 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:18:15.694Z,1542244695.694 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:18:15.695Z,1542244695.695 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:18:15.695Z,1542244695.695 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:19:50.817Z,1542244790.817 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.847,*-0.012,*0.000
2018-11-15T01:20:06.803Z,1542244806.803 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T01:15:04.6Z
2018-11-15T01:20:06.803Z,1542244806.803 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T01:20:06.803Z,1542244806.803 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T01:20:11.723Z,1542244811.723 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0031.lzma
2018-11-15T01:20:12.502Z,1542244812.502 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0031.lzma.bak
2018-11-15T01:20:12.502Z,1542244812.502 [DataOverHttps](INFO): SBD MOMSN=8877124
2018-11-15T01:20:21.551Z,1542244821.551 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20181114T233847/Express0032.lzma
2018-11-15T01:20:22.331Z,1542244822.331 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0032.lzma.bak
2018-11-15T01:20:22.331Z,1542244822.331 [DataOverHttps](INFO): SBD MOMSN=8877126
2018-11-15T01:20:23.167Z,1542244823.167 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T01:20:23.168Z,1542244823.168 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T01:20:23.168Z,1542244823.168 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T01:21:15.963Z,1542244875.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:21:15.963Z,1542244875.963 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-11-15T01:21:15.963Z,1542244875.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:21:15.965Z,1542244875.965 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:21:15.965Z,1542244875.965 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-11-15T01:21:15.965Z,1542244875.965 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:21:15.978Z,1542244875.978 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:21:15.978Z,1542244875.978 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:21:16.393Z,1542244876.393 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:21:16.393Z,1542244876.393 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-11-15T01:21:16.393Z,1542244876.393 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:21:16.393Z,1542244876.393 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-11-15T01:21:16.745Z,1542244876.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:21:16.746Z,1542244876.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:21:16.746Z,1542244876.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:21:16.746Z,1542244876.746 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:21:16.747Z,1542244876.747 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:21:16.747Z,1542244876.747 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:24:04.478Z,1542245044.478 [CBIT](INFO): Clearing failed state for component DropWeight
2018-11-15T01:24:04.478Z,1542245044.478 [DropWeight] No Fault, FailCount= 1
2018-11-15T01:24:16.865Z,1542245056.865 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:24:16.865Z,1542245056.865 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-11-15T01:24:16.866Z,1542245056.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:24:16.867Z,1542245056.867 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:24:16.867Z,1542245056.867 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-11-15T01:24:16.867Z,1542245056.867 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:24:16.884Z,1542245056.884 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:24:16.885Z,1542245056.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:24:17.283Z,1542245057.283 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:24:17.283Z,1542245057.283 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-11-15T01:24:17.283Z,1542245057.283 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:24:17.283Z,1542245057.283 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-11-15T01:24:17.638Z,1542245057.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:24:17.638Z,1542245057.638 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:24:17.639Z,1542245057.639 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:24:17.639Z,1542245057.639 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:24:17.639Z,1542245057.639 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:24:17.640Z,1542245057.640 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:25:23.406Z,1542245123.406 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T01:25:23.407Z,1542245123.407 [Default:CheckIn:C.Wait] Stopped
2018-11-15T01:25:23.407Z,1542245123.407 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T01:25:23.407Z,1542245123.407 [Default:CheckIn:D] Running Loop=1
2018-11-15T01:25:23.796Z,1542245123.796 [Default:CheckIn:D] Stopped
2018-11-15T01:25:23.796Z,1542245123.796 [Default:CheckIn:E] Running Loop=1
2018-11-15T01:25:24.204Z,1542245124.204 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.417806 min 
2018-11-15T01:25:24.204Z,1542245124.204 [Default:CheckIn:E] Stopped
2018-11-15T01:25:24.205Z,1542245124.205 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T01:25:24.206Z,1542245124.206 [Default:CheckIn] Stopped
2018-11-15T01:25:24.206Z,1542245124.206 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T01:25:24.206Z,1542245124.206 [Default:CheckIn](INFO): Running loop #11
2018-11-15T01:25:24.206Z,1542245124.206 [Default:CheckIn] Running Loop=11
2018-11-15T01:25:24.206Z,1542245124.206 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T01:25:24.206Z,1542245124.206 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T01:27:18.048Z,1542245238.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:27:18.048Z,1542245238.048 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-11-15T01:27:18.048Z,1542245238.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:27:18.054Z,1542245238.054 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:27:18.055Z,1542245238.055 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-11-15T01:27:18.055Z,1542245238.055 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:27:18.078Z,1542245238.078 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:27:18.078Z,1542245238.078 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:27:18.494Z,1542245238.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:27:18.494Z,1542245238.494 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-11-15T01:27:18.495Z,1542245238.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:27:18.495Z,1542245238.495 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-11-15T01:27:18.837Z,1542245238.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:27:18.838Z,1542245238.838 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:27:18.838Z,1542245238.838 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:27:18.838Z,1542245238.838 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:27:18.839Z,1542245238.839 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:27:18.839Z,1542245238.839 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:27:41.258Z,1542245261.258 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T01:27:41.259Z,1542245261.259 [NAL9602] Data Fault, FailCount= 5
2018-11-15T01:27:41.259Z,1542245261.259 [NAL9602](ERROR): Data Fault
2018-11-15T01:27:41.337Z,1542245261.337 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T01:27:41.337Z,1542245261.337 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-11-15T01:27:41.658Z,1542245261.658 [NAL9602](INFO): Powering down
2018-11-15T01:27:41.732Z,1542245261.732 [CBIT](INFO): Critical error at 20181115T012741
2018-11-15T01:28:29.745Z,1542245309.745 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-11-15T01:28:29.745Z,1542245309.745 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,
2018-11-15T01:29:41.503Z,1542245381.503 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T01:29:41.503Z,1542245381.503 [NAL9602] No Fault, FailCount= 5
2018-11-15T01:29:41.858Z,1542245381.858 [NAL9602](INFO): Powering up NAL9602
2018-11-15T01:29:52.735Z,1542245392.735 [NAL9602](INFO): NAL9602 initialized
2018-11-15T01:30:19.162Z,1542245419.162 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:30:19.162Z,1542245419.162 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-11-15T01:30:19.162Z,1542245419.162 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:30:19.164Z,1542245419.164 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:30:19.164Z,1542245419.164 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-11-15T01:30:19.164Z,1542245419.164 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:30:19.201Z,1542245419.201 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:30:19.201Z,1542245419.201 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:30:19.586Z,1542245419.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:30:19.586Z,1542245419.586 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-11-15T01:30:19.586Z,1542245419.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:30:19.586Z,1542245419.586 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-11-15T01:30:19.973Z,1542245419.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:30:19.973Z,1542245419.973 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:30:19.974Z,1542245419.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:30:19.974Z,1542245419.974 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:30:19.974Z,1542245419.974 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:30:19.975Z,1542245419.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:30:26.364Z,1542245426.364 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T01:25:24.2Z
2018-11-15T01:30:26.364Z,1542245426.364 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T01:30:26.364Z,1542245426.364 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T01:30:31.322Z,1542245431.322 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181114T233847/Courier0034.lzma
2018-11-15T01:30:32.090Z,1542245432.090 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0034.lzma.bak
2018-11-15T01:30:32.090Z,1542245432.090 [DataOverHttps](INFO): SBD MOMSN=8877191
2018-11-15T01:30:41.483Z,1542245441.483 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181114T233847/Express0035.lzma
2018-11-15T01:30:42.278Z,1542245442.278 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0035.lzma.bak
2018-11-15T01:30:42.278Z,1542245442.278 [DataOverHttps](INFO): SBD MOMSN=8877194
2018-11-15T01:30:43.178Z,1542245443.178 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T01:30:43.178Z,1542245443.178 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T01:30:43.178Z,1542245443.178 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T01:33:20.067Z,1542245600.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:33:20.068Z,1542245600.068 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-11-15T01:33:20.068Z,1542245600.068 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:33:20.070Z,1542245600.070 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:33:20.070Z,1542245600.070 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-11-15T01:33:20.070Z,1542245600.070 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:33:20.094Z,1542245600.094 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:33:20.094Z,1542245600.094 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:33:20.504Z,1542245600.504 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:33:20.504Z,1542245600.504 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-11-15T01:33:20.504Z,1542245600.504 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:33:20.513Z,1542245600.513 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-11-15T01:33:20.873Z,1542245600.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:33:20.874Z,1542245600.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:33:20.874Z,1542245600.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:33:20.874Z,1542245600.874 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:33:20.875Z,1542245600.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:33:20.875Z,1542245600.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:35:43.292Z,1542245743.292 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T01:35:43.292Z,1542245743.292 [Default:CheckIn:C.Wait] Stopped
2018-11-15T01:35:43.292Z,1542245743.292 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T01:35:43.292Z,1542245743.292 [Default:CheckIn:D] Running Loop=1
2018-11-15T01:35:43.677Z,1542245743.677 [Default:CheckIn:D] Stopped
2018-11-15T01:35:43.678Z,1542245743.678 [Default:CheckIn:E] Running Loop=1
2018-11-15T01:35:44.099Z,1542245744.099 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 113.749162 min 
2018-11-15T01:35:44.099Z,1542245744.099 [Default:CheckIn:E] Stopped
2018-11-15T01:35:44.099Z,1542245744.099 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T01:35:44.100Z,1542245744.100 [Default:CheckIn] Stopped
2018-11-15T01:35:44.100Z,1542245744.100 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T01:35:44.100Z,1542245744.100 [Default:CheckIn](INFO): Running loop #12
2018-11-15T01:35:44.100Z,1542245744.100 [Default:CheckIn] Running Loop=12
2018-11-15T01:35:44.100Z,1542245744.100 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T01:35:44.100Z,1542245744.100 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T01:36:20.934Z,1542245780.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:36:20.934Z,1542245780.934 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-11-15T01:36:20.934Z,1542245780.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:36:20.936Z,1542245780.936 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:36:20.936Z,1542245780.936 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-11-15T01:36:20.936Z,1542245780.936 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:36:20.960Z,1542245780.960 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:36:20.960Z,1542245780.960 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:36:21.345Z,1542245781.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:36:21.345Z,1542245781.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-11-15T01:36:21.346Z,1542245781.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:36:21.346Z,1542245781.346 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-11-15T01:36:21.721Z,1542245781.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:36:21.722Z,1542245781.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:36:21.722Z,1542245781.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:36:21.722Z,1542245781.722 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:36:21.723Z,1542245781.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:36:21.723Z,1542245781.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:39:22.092Z,1542245962.092 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:39:22.092Z,1542245962.092 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-11-15T01:39:22.092Z,1542245962.092 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:39:22.094Z,1542245962.094 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:39:22.094Z,1542245962.094 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-11-15T01:39:22.094Z,1542245962.094 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:39:22.130Z,1542245962.130 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:39:22.131Z,1542245962.131 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:39:22.498Z,1542245962.498 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:39:22.498Z,1542245962.498 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-11-15T01:39:22.498Z,1542245962.498 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:39:22.498Z,1542245962.498 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-11-15T01:39:22.873Z,1542245962.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:39:22.874Z,1542245962.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:39:22.874Z,1542245962.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:39:22.874Z,1542245962.874 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:39:22.875Z,1542245962.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:39:22.875Z,1542245962.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:39:56.146Z,1542245996.146 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T01:39:56.147Z,1542245996.147 [NAL9602] Data Fault, FailCount= 1
2018-11-15T01:39:56.147Z,1542245996.147 [NAL9602](ERROR): Data Fault
2018-11-15T01:39:56.235Z,1542245996.235 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T01:39:56.546Z,1542245996.546 [NAL9602](INFO): Powering down
2018-11-15T01:39:57.434Z,1542245997.434 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T01:39:57.434Z,1542245997.434 [NAL9602] No Fault, FailCount= 1
2018-11-15T01:40:26.651Z,1542246026.651 [NAL9602](INFO): Powering up NAL9602
2018-11-15T01:40:37.855Z,1542246037.855 [NAL9602](INFO): NAL9602 initialized
2018-11-15T01:40:46.692Z,1542246046.692 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T01:35:44.1Z
2018-11-15T01:40:46.692Z,1542246046.692 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T01:40:46.692Z,1542246046.692 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T01:40:51.622Z,1542246051.622 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0037.lzma
2018-11-15T01:40:52.402Z,1542246052.402 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0037.lzma.bak
2018-11-15T01:40:52.402Z,1542246052.402 [DataOverHttps](INFO): SBD MOMSN=8877266
2018-11-15T01:41:01.492Z,1542246061.492 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181114T233847/Express0038.lzma
2018-11-15T01:41:02.278Z,1542246062.278 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0038.lzma.bak
2018-11-15T01:41:02.278Z,1542246062.278 [DataOverHttps](INFO): SBD MOMSN=8877268
2018-11-15T01:41:03.119Z,1542246063.119 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T01:41:03.119Z,1542246063.119 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T01:41:03.119Z,1542246063.119 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T01:42:23.105Z,1542246143.105 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:42:23.105Z,1542246143.105 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-11-15T01:42:23.105Z,1542246143.105 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:42:23.107Z,1542246143.107 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:42:23.107Z,1542246143.107 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-11-15T01:42:23.107Z,1542246143.107 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:42:23.128Z,1542246143.128 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:42:23.133Z,1542246143.133 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:42:23.493Z,1542246143.493 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:42:23.493Z,1542246143.493 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-11-15T01:42:23.494Z,1542246143.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:42:23.494Z,1542246143.494 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-11-15T01:42:23.911Z,1542246143.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:42:23.912Z,1542246143.912 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:42:23.912Z,1542246143.912 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:42:23.912Z,1542246143.912 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:42:23.913Z,1542246143.913 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:42:23.913Z,1542246143.913 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:44:39.394Z,1542246279.394 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-11-15T01:44:39.394Z,1542246279.394 [RDI_Pathfinder](ERROR): Failed to parse:
:HMc,0ffd,*15.873,*-0.011,*0.000
2018-11-15T01:45:24.266Z,1542246324.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:45:24.266Z,1542246324.266 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-11-15T01:45:24.266Z,1542246324.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:45:24.268Z,1542246324.268 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:45:24.268Z,1542246324.268 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-11-15T01:45:24.268Z,1542246324.268 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:45:24.297Z,1542246324.297 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:45:24.297Z,1542246324.297 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:45:24.681Z,1542246324.681 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:45:24.681Z,1542246324.681 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-11-15T01:45:24.682Z,1542246324.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:45:24.682Z,1542246324.682 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-11-15T01:45:25.084Z,1542246325.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:45:25.084Z,1542246325.084 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:45:25.085Z,1542246325.085 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:45:25.085Z,1542246325.085 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:45:25.086Z,1542246325.086 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:45:25.086Z,1542246325.086 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:46:03.515Z,1542246363.515 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T01:46:03.515Z,1542246363.515 [Default:CheckIn:C.Wait] Stopped
2018-11-15T01:46:03.515Z,1542246363.515 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T01:46:03.515Z,1542246363.515 [Default:CheckIn:D] Running Loop=1
2018-11-15T01:46:03.938Z,1542246363.938 [Default:CheckIn:D] Stopped
2018-11-15T01:46:03.938Z,1542246363.938 [Default:CheckIn:E] Running Loop=1
2018-11-15T01:46:04.342Z,1542246364.342 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 124.086841 min 
2018-11-15T01:46:04.342Z,1542246364.342 [Default:CheckIn:E] Stopped
2018-11-15T01:46:04.342Z,1542246364.342 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T01:46:04.342Z,1542246364.342 [Default:CheckIn] Stopped
2018-11-15T01:46:04.342Z,1542246364.342 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T01:46:04.342Z,1542246364.342 [Default:CheckIn](INFO): Running loop #13
2018-11-15T01:46:04.342Z,1542246364.342 [Default:CheckIn] Running Loop=13
2018-11-15T01:46:04.343Z,1542246364.343 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T01:46:04.343Z,1542246364.343 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T01:48:25.397Z,1542246505.397 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:48:25.397Z,1542246505.397 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-11-15T01:48:25.397Z,1542246505.397 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:48:25.399Z,1542246505.399 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:48:25.399Z,1542246505.399 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-11-15T01:48:25.399Z,1542246505.399 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:48:25.411Z,1542246505.411 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:48:25.411Z,1542246505.411 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:48:25.811Z,1542246505.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:48:25.811Z,1542246505.811 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-11-15T01:48:25.812Z,1542246505.812 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:48:25.812Z,1542246505.812 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-11-15T01:48:26.200Z,1542246506.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:48:26.201Z,1542246506.201 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:48:26.201Z,1542246506.201 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:48:26.202Z,1542246506.202 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:48:26.202Z,1542246506.202 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:48:26.202Z,1542246506.202 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:49:07.464Z,1542246547.464 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-11-15T01:49:07.464Z,1542246547.464 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18111418492065,35.0, -0.1,   .9,  0
2018-11-15T01:50:38.838Z,1542246638.838 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T01:50:38.839Z,1542246638.839 [NAL9602] Data Fault, FailCount= 2
2018-11-15T01:50:38.839Z,1542246638.839 [NAL9602](ERROR): Data Fault
2018-11-15T01:50:38.915Z,1542246638.915 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T01:50:39.238Z,1542246639.238 [NAL9602](INFO): Powering down
2018-11-15T01:50:40.095Z,1542246640.095 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T01:50:40.095Z,1542246640.095 [NAL9602] No Fault, FailCount= 2
2018-11-15T01:51:06.470Z,1542246666.470 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T01:46:04.3Z
2018-11-15T01:51:06.470Z,1542246666.470 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T01:51:06.470Z,1542246666.470 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T01:51:11.288Z,1542246671.288 [NAL9602](INFO): Powering up NAL9602
2018-11-15T01:51:11.388Z,1542246671.388 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0040.lzma
2018-11-15T01:51:12.182Z,1542246672.182 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0040.lzma.bak
2018-11-15T01:51:12.183Z,1542246672.183 [DataOverHttps](INFO): SBD MOMSN=8877328
2018-11-15T01:51:21.178Z,1542246681.178 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181114T233847/Express0041.lzma
2018-11-15T01:51:21.955Z,1542246681.955 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0041.lzma.bak
2018-11-15T01:51:21.955Z,1542246681.955 [DataOverHttps](INFO): SBD MOMSN=8877330
2018-11-15T01:51:22.721Z,1542246682.721 [NAL9602](INFO): NAL9602 initialized
2018-11-15T01:51:22.755Z,1542246682.755 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T01:51:22.755Z,1542246682.755 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T01:51:22.755Z,1542246682.755 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T01:51:26.536Z,1542246686.536 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:51:26.536Z,1542246686.536 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-11-15T01:51:26.536Z,1542246686.536 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:51:26.538Z,1542246686.538 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:51:26.538Z,1542246686.538 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-11-15T01:51:26.538Z,1542246686.538 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:51:26.551Z,1542246686.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:51:26.551Z,1542246686.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:51:26.948Z,1542246686.948 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:51:26.948Z,1542246686.948 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-11-15T01:51:26.948Z,1542246686.948 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:51:26.948Z,1542246686.948 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-11-15T01:51:27.299Z,1542246687.299 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.847, -0.008, 0.000
2018-11-15T01:51:27.326Z,1542246687.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:51:27.327Z,1542246687.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:51:27.327Z,1542246687.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:51:27.327Z,1542246687.327 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:51:27.328Z,1542246687.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:51:27.328Z,1542246687.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:52:38.379Z,1542246758.379 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,8003.42
2018-11-15T01:52:54.398Z,1542246774.398 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-11-15T01:52:54.398Z,1542246774.398 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18111418530765,35.0, -0.1,   0.0, 0
2018-11-15T01:54:05.722Z,1542246845.722 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-11-15T01:54:05.722Z,1542246845.722 [DropWeight] Hardware Fault, FailCount= 1
2018-11-15T01:54:05.722Z,1542246845.722 [DropWeight](ERROR): Hardware Fault
2018-11-15T01:54:05.789Z,1542246845.789 [CBIT](INFO): Critical error at 20181115T015405
2018-11-15T01:54:05.791Z,1542246845.791 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-11-15T01:54:05.792Z,1542246845.792 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-11-15T01:54:06.178Z,1542246846.178 [CBIT](INFO): Critical error at 20181115T015405
2018-11-15T01:54:27.419Z,1542246867.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:54:27.419Z,1542246867.419 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-11-15T01:54:27.419Z,1542246867.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:54:27.425Z,1542246867.425 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:54:27.425Z,1542246867.425 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-11-15T01:54:27.425Z,1542246867.425 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:54:27.446Z,1542246867.446 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:54:27.446Z,1542246867.446 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:54:27.809Z,1542246867.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:54:27.809Z,1542246867.809 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-11-15T01:54:27.809Z,1542246867.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:54:27.809Z,1542246867.809 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-11-15T01:54:28.232Z,1542246868.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:54:28.232Z,1542246868.232 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:54:28.237Z,1542246868.237 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:54:28.237Z,1542246868.237 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:54:28.238Z,1542246868.238 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:54:28.238Z,1542246868.238 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:56:23.111Z,1542246983.111 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T01:56:23.111Z,1542246983.111 [Default:CheckIn:C.Wait] Stopped
2018-11-15T01:56:23.112Z,1542246983.112 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T01:56:23.112Z,1542246983.112 [Default:CheckIn:D] Running Loop=1
2018-11-15T01:56:23.459Z,1542246983.459 [Default:CheckIn:D] Stopped
2018-11-15T01:56:23.459Z,1542246983.459 [Default:CheckIn:E] Running Loop=1
2018-11-15T01:56:23.856Z,1542246983.856 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 134.412199 min 
2018-11-15T01:56:23.861Z,1542246983.861 [Default:CheckIn:E] Stopped
2018-11-15T01:56:23.861Z,1542246983.861 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T01:56:23.861Z,1542246983.861 [Default:CheckIn] Stopped
2018-11-15T01:56:23.861Z,1542246983.861 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T01:56:23.861Z,1542246983.861 [Default:CheckIn](INFO): Running loop #14
2018-11-15T01:56:23.861Z,1542246983.861 [Default:CheckIn] Running Loop=14
2018-11-15T01:56:23.861Z,1542246983.861 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T01:56:23.862Z,1542246983.862 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T01:57:28.434Z,1542247048.434 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:57:28.434Z,1542247048.434 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-11-15T01:57:28.434Z,1542247048.434 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T01:57:28.436Z,1542247048.436 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T01:57:28.436Z,1542247048.436 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-11-15T01:57:28.436Z,1542247048.436 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T01:57:28.469Z,1542247048.469 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T01:57:28.469Z,1542247048.469 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T01:57:28.843Z,1542247048.843 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T01:57:28.843Z,1542247048.843 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-11-15T01:57:28.848Z,1542247048.848 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T01:57:28.848Z,1542247048.848 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-11-15T01:57:29.225Z,1542247049.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T01:57:29.226Z,1542247049.226 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:57:29.226Z,1542247049.226 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:57:29.226Z,1542247049.226 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T01:57:29.227Z,1542247049.227 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T01:57:29.227Z,1542247049.227 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T01:59:06.267Z,1542247146.267 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-11-15T02:00:29.350Z,1542247229.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:00:29.350Z,1542247229.350 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-11-15T02:00:29.350Z,1542247229.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:00:29.354Z,1542247229.354 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:00:29.355Z,1542247229.355 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-11-15T02:00:29.355Z,1542247229.355 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:00:29.371Z,1542247229.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:00:29.371Z,1542247229.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:00:29.830Z,1542247229.830 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:00:29.830Z,1542247229.830 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-11-15T02:00:29.830Z,1542247229.830 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:00:29.830Z,1542247229.830 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-11-15T02:00:30.130Z,1542247230.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:00:30.131Z,1542247230.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:00:30.131Z,1542247230.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:00:30.131Z,1542247230.131 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:00:30.132Z,1542247230.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:00:30.132Z,1542247230.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:01:21.415Z,1542247281.415 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-11-15T02:01:26.132Z,1542247286.132 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T02:01:26.132Z,1542247286.132 [NAL9602] Data Fault, FailCount= 3
2018-11-15T02:01:26.132Z,1542247286.132 [NAL9602](ERROR): Data Fault
2018-11-15T02:01:26.210Z,1542247286.210 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T01:56:23.9Z
2018-11-15T02:01:26.210Z,1542247286.210 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T02:01:26.210Z,1542247286.210 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T02:01:26.221Z,1542247286.221 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T02:01:26.302Z,1542247286.302 [NAL9602](INFO): Powering down
2018-11-15T02:01:27.117Z,1542247287.117 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T02:01:27.117Z,1542247287.117 [NAL9602] No Fault, FailCount= 3
2018-11-15T02:01:31.160Z,1542247291.160 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20181114T233847/Courier0043.lzma
2018-11-15T02:01:31.938Z,1542247291.938 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0043.lzma.bak
2018-11-15T02:01:31.938Z,1542247291.938 [DataOverHttps](INFO): SBD MOMSN=8877395
2018-11-15T02:01:40.888Z,1542247300.888 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181114T233847/Express0044.lzma
2018-11-15T02:01:41.670Z,1542247301.670 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0044.lzma.bak
2018-11-15T02:01:41.671Z,1542247301.671 [DataOverHttps](INFO): SBD MOMSN=8877399
2018-11-15T02:01:42.474Z,1542247302.474 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T02:01:42.474Z,1542247302.474 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T02:01:42.475Z,1542247302.475 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T02:01:56.642Z,1542247316.642 [NAL9602](INFO): Powering up NAL9602
2018-11-15T02:02:07.446Z,1542247327.446 [NAL9602](INFO): NAL9602 initialized
2018-11-15T02:03:31.442Z,1542247411.442 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:03:31.442Z,1542247411.442 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-11-15T02:03:31.442Z,1542247411.442 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:03:31.444Z,1542247411.444 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:03:31.444Z,1542247411.444 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-11-15T02:03:31.444Z,1542247411.444 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:03:31.511Z,1542247411.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:03:31.511Z,1542247411.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:03:31.609Z,1542247411.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:03:31.609Z,1542247411.609 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-11-15T02:03:31.610Z,1542247411.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:03:31.610Z,1542247411.610 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-11-15T02:03:31.986Z,1542247411.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:03:31.987Z,1542247411.987 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:03:31.988Z,1542247411.988 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:03:31.994Z,1542247411.994 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:03:31.995Z,1542247411.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:03:31.995Z,1542247411.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:06:31.993Z,1542247591.993 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:06:31.994Z,1542247591.994 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-11-15T02:06:31.994Z,1542247591.994 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:06:32.001Z,1542247592.001 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:06:32.002Z,1542247592.002 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-11-15T02:06:32.002Z,1542247592.002 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:06:32.020Z,1542247592.020 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:06:32.020Z,1542247592.020 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:06:32.411Z,1542247592.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:06:32.411Z,1542247592.411 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-11-15T02:06:32.412Z,1542247592.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:06:32.412Z,1542247592.412 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-11-15T02:06:32.781Z,1542247592.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:06:32.781Z,1542247592.781 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:06:32.782Z,1542247592.782 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:06:32.782Z,1542247592.782 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:06:32.783Z,1542247592.783 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:06:32.783Z,1542247592.783 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:06:42.784Z,1542247602.784 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T02:06:42.784Z,1542247602.784 [Default:CheckIn:C.Wait] Stopped
2018-11-15T02:06:42.784Z,1542247602.784 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T02:06:42.784Z,1542247602.784 [Default:CheckIn:D] Running Loop=1
2018-11-15T02:06:43.228Z,1542247603.228 [Default:CheckIn:D] Stopped
2018-11-15T02:06:43.228Z,1542247603.228 [Default:CheckIn:E] Running Loop=1
2018-11-15T02:06:43.588Z,1542247603.588 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 144.741667 min 
2018-11-15T02:06:43.613Z,1542247603.613 [Default:CheckIn:E] Stopped
2018-11-15T02:06:43.613Z,1542247603.613 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T02:06:43.613Z,1542247603.613 [Default:CheckIn] Stopped
2018-11-15T02:06:43.613Z,1542247603.613 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T02:06:43.613Z,1542247603.613 [Default:CheckIn](INFO): Running loop #15
2018-11-15T02:06:43.613Z,1542247603.613 [Default:CheckIn] Running Loop=15
2018-11-15T02:06:43.614Z,1542247603.614 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T02:06:43.614Z,1542247603.614 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T02:09:05.994Z,1542247745.994 [CBIT](INFO): Clearing failed state for component DropWeight
2018-11-15T02:09:05.994Z,1542247745.994 [DropWeight] No Fault, FailCount= 1
2018-11-15T02:09:32.843Z,1542247772.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:09:32.843Z,1542247772.843 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-11-15T02:09:32.843Z,1542247772.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:09:32.845Z,1542247772.845 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:09:32.845Z,1542247772.845 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-11-15T02:09:32.845Z,1542247772.845 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:09:32.886Z,1542247772.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:09:32.886Z,1542247772.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:09:33.293Z,1542247773.293 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:09:33.293Z,1542247773.293 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-11-15T02:09:33.294Z,1542247773.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:09:33.294Z,1542247773.294 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-11-15T02:09:33.653Z,1542247773.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:09:33.654Z,1542247773.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:09:33.654Z,1542247773.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:09:33.655Z,1542247773.655 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:09:33.655Z,1542247773.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:09:33.655Z,1542247773.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:11:31.389Z,1542247891.389 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-11-15T02:11:31.389Z,1542247891.389 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18111419114465,35.0, -0.1,   0.0,144

2018-11-15T02:11:45.392Z,1542247905.392 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T02:06:43.6Z
2018-11-15T02:11:45.392Z,1542247905.392 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T02:11:45.392Z,1542247905.392 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T02:11:50.334Z,1542247910.334 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0046.lzma
2018-11-15T02:11:51.098Z,1542247911.098 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0046.lzma.bak
2018-11-15T02:11:51.098Z,1542247911.098 [DataOverHttps](INFO): SBD MOMSN=8877454
2018-11-15T02:12:00.553Z,1542247920.553 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20181114T233847/Express0047.lzma
2018-11-15T02:12:01.346Z,1542247921.346 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0047.lzma.bak
2018-11-15T02:12:01.347Z,1542247921.347 [DataOverHttps](INFO): SBD MOMSN=8877456
2018-11-15T02:12:02.205Z,1542247922.205 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T02:12:02.205Z,1542247922.205 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T02:12:02.205Z,1542247922.205 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T02:12:08.346Z,1542247928.346 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T02:12:08.346Z,1542247928.346 [NAL9602] Data Fault, FailCount= 4
2018-11-15T02:12:08.346Z,1542247928.346 [NAL9602](ERROR): Data Fault
2018-11-15T02:12:08.411Z,1542247928.411 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T02:12:08.734Z,1542247928.734 [NAL9602](INFO): Powering down
2018-11-15T02:12:09.596Z,1542247929.596 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T02:12:09.596Z,1542247929.596 [NAL9602] No Fault, FailCount= 4
2018-11-15T02:12:33.993Z,1542247953.993 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:12:33.993Z,1542247953.993 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-11-15T02:12:33.993Z,1542247953.993 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:12:34.006Z,1542247954.006 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:12:34.006Z,1542247954.006 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-11-15T02:12:34.006Z,1542247954.006 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:12:34.018Z,1542247954.018 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:12:34.019Z,1542247954.019 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:12:34.409Z,1542247954.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:12:34.409Z,1542247954.409 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-11-15T02:12:34.410Z,1542247954.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:12:34.410Z,1542247954.410 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-11-15T02:12:34.772Z,1542247954.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:12:34.773Z,1542247954.773 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:12:34.773Z,1542247954.773 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:12:34.774Z,1542247954.774 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:12:34.774Z,1542247954.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:12:34.774Z,1542247954.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:12:41.637Z,1542247961.637 [NAL9602](INFO): Powering up NAL9602
2018-11-15T02:12:52.538Z,1542247972.538 [NAL9602](INFO): NAL9602 initialized
2018-11-15T02:15:37.443Z,1542248137.443 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:15:37.443Z,1542248137.443 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-11-15T02:15:37.443Z,1542248137.443 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:15:37.445Z,1542248137.445 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:15:37.445Z,1542248137.445 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-11-15T02:15:37.445Z,1542248137.445 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:15:37.483Z,1542248137.483 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:15:37.483Z,1542248137.483 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:15:37.597Z,1542248137.597 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:15:37.601Z,1542248137.601 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-11-15T02:15:37.601Z,1542248137.601 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:15:37.601Z,1542248137.601 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-11-15T02:15:37.962Z,1542248137.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:15:37.962Z,1542248137.962 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:15:37.963Z,1542248137.963 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:15:37.963Z,1542248137.963 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:15:37.964Z,1542248137.964 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:15:37.964Z,1542248137.964 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:17:02.445Z,1542248222.445 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T02:17:02.445Z,1542248222.445 [Default:CheckIn:C.Wait] Stopped
2018-11-15T02:17:02.445Z,1542248222.445 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T02:17:02.445Z,1542248222.445 [Default:CheckIn:D] Running Loop=1
2018-11-15T02:17:02.884Z,1542248222.884 [Default:CheckIn:D] Stopped
2018-11-15T02:17:02.884Z,1542248222.884 [Default:CheckIn:E] Running Loop=1
2018-11-15T02:17:03.303Z,1542248223.303 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 155.069271 min 
2018-11-15T02:17:03.303Z,1542248223.303 [Default:CheckIn:E] Stopped
2018-11-15T02:17:03.303Z,1542248223.303 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T02:17:03.303Z,1542248223.303 [Default:CheckIn] Stopped
2018-11-15T02:17:03.304Z,1542248223.304 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T02:17:03.304Z,1542248223.304 [Default:CheckIn](INFO): Running loop #16
2018-11-15T02:17:03.304Z,1542248223.304 [Default:CheckIn] Running Loop=16
2018-11-15T02:17:03.304Z,1542248223.304 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T02:17:03.304Z,1542248223.304 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T02:18:38.359Z,1542248318.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:18:38.359Z,1542248318.359 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-11-15T02:18:38.359Z,1542248318.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:18:38.361Z,1542248318.361 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:18:38.362Z,1542248318.362 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-11-15T02:18:38.362Z,1542248318.362 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:18:38.390Z,1542248318.390 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:18:38.390Z,1542248318.390 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:18:38.768Z,1542248318.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:18:38.768Z,1542248318.768 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-11-15T02:18:38.768Z,1542248318.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:18:38.768Z,1542248318.768 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-11-15T02:18:39.149Z,1542248319.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:18:39.149Z,1542248319.149 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:18:39.150Z,1542248319.150 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:18:39.150Z,1542248319.150 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:18:39.151Z,1542248319.151 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:18:39.151Z,1542248319.151 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:20:56.227Z,1542248456.227 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-11-15T02:21:39.534Z,1542248499.534 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:21:39.534Z,1542248499.534 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-11-15T02:21:39.534Z,1542248499.534 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:21:39.536Z,1542248499.536 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:21:39.536Z,1542248499.536 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-11-15T02:21:39.536Z,1542248499.536 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:21:39.573Z,1542248499.573 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:21:39.573Z,1542248499.573 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:21:39.951Z,1542248499.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:21:39.951Z,1542248499.951 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-11-15T02:21:39.952Z,1542248499.952 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:21:39.952Z,1542248499.952 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-11-15T02:21:40.316Z,1542248500.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:21:40.325Z,1542248500.325 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:21:40.326Z,1542248500.326 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:21:40.326Z,1542248500.326 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:21:40.327Z,1542248500.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:21:40.327Z,1542248500.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:22:05.504Z,1542248525.504 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T02:17:03.3Z
2018-11-15T02:22:05.504Z,1542248525.504 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T02:22:05.504Z,1542248525.504 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T02:22:12.804Z,1542248532.804 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0049.lzma
2018-11-15T02:22:13.586Z,1542248533.586 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0049.lzma.bak
2018-11-15T02:22:13.586Z,1542248533.586 [DataOverHttps](INFO): SBD MOMSN=8877527
2018-11-15T02:22:23.728Z,1542248543.728 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181114T233847/Express0050.lzma
2018-11-15T02:22:24.514Z,1542248544.514 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0050.lzma.bak
2018-11-15T02:22:24.514Z,1542248544.514 [DataOverHttps](INFO): SBD MOMSN=8877529
2018-11-15T02:22:25.352Z,1542248545.352 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T02:22:25.352Z,1542248545.352 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T02:22:25.352Z,1542248545.352 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T02:22:55.883Z,1542248575.883 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T02:22:55.883Z,1542248575.883 [NAL9602] Data Fault, FailCount= 5
2018-11-15T02:22:55.883Z,1542248575.883 [NAL9602](ERROR): Data Fault
2018-11-15T02:22:55.973Z,1542248575.973 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T02:22:55.974Z,1542248575.974 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-11-15T02:22:56.282Z,1542248576.282 [NAL9602](INFO): Powering down
2018-11-15T02:22:56.355Z,1542248576.355 [CBIT](INFO): Critical error at 20181115T022255
2018-11-15T02:24:40.505Z,1542248680.505 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:24:40.505Z,1542248680.505 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-11-15T02:24:40.506Z,1542248680.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:24:40.507Z,1542248680.507 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:24:40.507Z,1542248680.507 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-11-15T02:24:40.507Z,1542248680.507 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:24:40.520Z,1542248680.520 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:24:40.520Z,1542248680.520 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:24:40.911Z,1542248680.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:24:40.911Z,1542248680.911 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-11-15T02:24:40.911Z,1542248680.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:24:40.911Z,1542248680.911 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-11-15T02:24:41.310Z,1542248681.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:24:41.311Z,1542248681.311 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:24:41.311Z,1542248681.311 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:24:41.312Z,1542248681.312 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:24:41.312Z,1542248681.312 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:24:41.312Z,1542248681.312 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:24:56.203Z,1542248696.203 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T02:24:56.203Z,1542248696.203 [NAL9602] No Fault, FailCount= 5
2018-11-15T02:24:56.526Z,1542248696.526 [NAL9602](INFO): Powering up NAL9602
2018-11-15T02:25:07.726Z,1542248707.726 [NAL9602](INFO): NAL9602 initialized
2018-11-15T02:27:25.496Z,1542248845.496 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T02:27:25.496Z,1542248845.496 [Default:CheckIn:C.Wait] Stopped
2018-11-15T02:27:25.496Z,1542248845.496 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T02:27:25.496Z,1542248845.496 [Default:CheckIn:D] Running Loop=1
2018-11-15T02:27:25.900Z,1542248845.900 [Default:CheckIn:D] Stopped
2018-11-15T02:27:25.900Z,1542248845.900 [Default:CheckIn:E] Running Loop=1
2018-11-15T02:27:26.308Z,1542248846.308 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 165.452865 min 
2018-11-15T02:27:26.308Z,1542248846.308 [Default:CheckIn:E] Stopped
2018-11-15T02:27:26.308Z,1542248846.308 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T02:27:26.308Z,1542248846.308 [Default:CheckIn] Stopped
2018-11-15T02:27:26.308Z,1542248846.308 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T02:27:26.308Z,1542248846.308 [Default:CheckIn](INFO): Running loop #17
2018-11-15T02:27:26.309Z,1542248846.309 [Default:CheckIn] Running Loop=17
2018-11-15T02:27:26.309Z,1542248846.309 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T02:27:26.309Z,1542248846.309 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T02:27:41.504Z,1542248861.504 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:27:41.504Z,1542248861.504 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-11-15T02:27:41.504Z,1542248861.504 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:27:41.506Z,1542248861.506 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:27:41.506Z,1542248861.506 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-11-15T02:27:41.506Z,1542248861.506 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:27:41.518Z,1542248861.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:27:41.518Z,1542248861.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:27:41.920Z,1542248861.920 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:27:41.920Z,1542248861.920 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-11-15T02:27:41.921Z,1542248861.921 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:27:41.921Z,1542248861.921 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-11-15T02:27:42.308Z,1542248862.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:27:42.309Z,1542248862.309 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:27:42.309Z,1542248862.309 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:27:42.310Z,1542248862.310 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:27:42.310Z,1542248862.310 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:27:42.311Z,1542248862.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:30:42.744Z,1542249042.744 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:30:42.744Z,1542249042.744 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-11-15T02:30:42.745Z,1542249042.745 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:30:42.746Z,1542249042.746 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:30:42.747Z,1542249042.747 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-11-15T02:30:42.747Z,1542249042.747 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:30:42.759Z,1542249042.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:30:42.760Z,1542249042.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:30:42.910Z,1542249042.910 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:30:42.911Z,1542249042.911 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-11-15T02:30:42.911Z,1542249042.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:30:42.912Z,1542249042.912 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-11-15T02:30:43.234Z,1542249043.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:30:43.235Z,1542249043.235 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:30:43.235Z,1542249043.235 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:30:43.236Z,1542249043.236 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:30:43.236Z,1542249043.236 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:30:43.236Z,1542249043.236 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:32:28.567Z,1542249148.567 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T02:27:26.3Z
2018-11-15T02:32:28.567Z,1542249148.567 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T02:32:28.567Z,1542249148.567 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T02:32:33.480Z,1542249153.480 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181114T233847/Courier0052.lzma
2018-11-15T02:32:34.260Z,1542249154.260 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0052.lzma.bak
2018-11-15T02:32:34.260Z,1542249154.260 [DataOverHttps](INFO): SBD MOMSN=8877596
2018-11-15T02:32:43.312Z,1542249163.312 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181114T233847/Express0053.lzma
2018-11-15T02:32:44.078Z,1542249164.078 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0053.lzma.bak
2018-11-15T02:32:44.078Z,1542249164.078 [DataOverHttps](INFO): SBD MOMSN=8877599
2018-11-15T02:32:44.913Z,1542249164.913 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T02:32:44.917Z,1542249164.917 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T02:32:44.917Z,1542249164.917 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T02:33:43.236Z,1542249223.236 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:33:43.236Z,1542249223.236 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-11-15T02:33:43.236Z,1542249223.236 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:33:43.242Z,1542249223.242 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:33:43.242Z,1542249223.242 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-11-15T02:33:43.242Z,1542249223.242 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:33:43.266Z,1542249223.266 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:33:43.266Z,1542249223.266 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:33:43.646Z,1542249223.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:33:43.646Z,1542249223.646 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-11-15T02:33:43.646Z,1542249223.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:33:43.646Z,1542249223.646 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-11-15T02:33:44.038Z,1542249224.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:33:44.038Z,1542249224.038 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:33:44.039Z,1542249224.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:33:44.039Z,1542249224.039 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:33:44.040Z,1542249224.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:33:44.040Z,1542249224.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:35:10.579Z,1542249310.579 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T02:35:10.579Z,1542249310.579 [NAL9602] Data Fault, FailCount= 1
2018-11-15T02:35:10.579Z,1542249310.579 [NAL9602](ERROR): Data Fault
2018-11-15T02:35:10.671Z,1542249310.671 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T02:35:10.990Z,1542249310.990 [NAL9602](INFO): Powering down
2018-11-15T02:35:11.826Z,1542249311.826 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T02:35:11.826Z,1542249311.826 [NAL9602] No Fault, FailCount= 1
2018-11-15T02:35:40.994Z,1542249340.994 [NAL9602](INFO): Powering up NAL9602
2018-11-15T02:35:51.891Z,1542249351.891 [NAL9602](INFO): NAL9602 initialized
2018-11-15T02:36:44.403Z,1542249404.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:36:44.403Z,1542249404.403 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-11-15T02:36:44.403Z,1542249404.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:36:44.405Z,1542249404.405 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:36:44.405Z,1542249404.405 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-11-15T02:36:44.405Z,1542249404.405 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:36:44.418Z,1542249404.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:36:44.418Z,1542249404.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:36:44.805Z,1542249404.805 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:36:44.805Z,1542249404.805 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-11-15T02:36:44.806Z,1542249404.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:36:44.806Z,1542249404.806 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-11-15T02:36:45.185Z,1542249405.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:36:45.186Z,1542249405.186 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:36:45.186Z,1542249405.186 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:36:45.186Z,1542249405.186 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:36:45.187Z,1542249405.187 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:36:45.187Z,1542249405.187 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:37:45.350Z,1542249465.350 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T02:37:45.350Z,1542249465.350 [Default:CheckIn:C.Wait] Stopped
2018-11-15T02:37:45.350Z,1542249465.350 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T02:37:45.350Z,1542249465.350 [Default:CheckIn:D] Running Loop=1
2018-11-15T02:37:45.736Z,1542249465.736 [Default:CheckIn:D] Stopped
2018-11-15T02:37:45.736Z,1542249465.736 [Default:CheckIn:E] Running Loop=1
2018-11-15T02:37:46.162Z,1542249466.162 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 175.783480 min 
2018-11-15T02:37:46.162Z,1542249466.162 [Default:CheckIn:E] Stopped
2018-11-15T02:37:46.162Z,1542249466.162 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T02:37:46.162Z,1542249466.162 [Default:CheckIn] Stopped
2018-11-15T02:37:46.162Z,1542249466.162 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T02:37:46.163Z,1542249466.163 [Default:CheckIn](INFO): Running loop #18
2018-11-15T02:37:46.163Z,1542249466.163 [Default:CheckIn] Running Loop=18
2018-11-15T02:37:46.163Z,1542249466.163 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T02:37:46.163Z,1542249466.163 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T02:39:07.526Z,1542249547.526 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-11-15T02:39:07.527Z,1542249547.527 [DropWeight] Hardware Fault, FailCount= 1
2018-11-15T02:39:07.527Z,1542249547.527 [DropWeight](ERROR): Hardware Fault
2018-11-15T02:39:07.581Z,1542249547.581 [CBIT](INFO): Critical error at 20181115T023907
2018-11-15T02:39:07.583Z,1542249547.583 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-11-15T02:39:07.584Z,1542249547.584 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-11-15T02:39:07.997Z,1542249547.997 [CBIT](INFO): Critical error at 20181115T023907
2018-11-15T02:39:45.250Z,1542249585.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:39:45.250Z,1542249585.250 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-11-15T02:39:45.250Z,1542249585.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:39:45.252Z,1542249585.252 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:39:45.252Z,1542249585.252 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-11-15T02:39:45.252Z,1542249585.252 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:39:45.281Z,1542249585.281 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:39:45.281Z,1542249585.281 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:39:45.661Z,1542249585.661 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:39:45.662Z,1542249585.662 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-11-15T02:39:45.662Z,1542249585.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:39:45.662Z,1542249585.662 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-11-15T02:39:46.057Z,1542249586.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:39:46.057Z,1542249586.057 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:39:46.058Z,1542249586.058 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:39:46.058Z,1542249586.058 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:39:46.058Z,1542249586.058 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:39:46.059Z,1542249586.059 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:42:48.055Z,1542249768.055 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:42:48.055Z,1542249768.055 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-11-15T02:42:48.055Z,1542249768.055 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:42:48.057Z,1542249768.057 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:42:48.057Z,1542249768.057 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-11-15T02:42:48.057Z,1542249768.057 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:42:48.059Z,1542249768.059 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T02:37:46.2Z
2018-11-15T02:42:48.060Z,1542249768.060 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T02:42:48.060Z,1542249768.060 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T02:42:48.074Z,1542249768.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:42:48.074Z,1542249768.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:42:48.224Z,1542249768.224 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:42:48.229Z,1542249768.229 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-11-15T02:42:48.229Z,1542249768.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:42:48.229Z,1542249768.229 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-11-15T02:42:48.730Z,1542249768.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:42:48.730Z,1542249768.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:42:48.731Z,1542249768.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:42:48.731Z,1542249768.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:42:48.731Z,1542249768.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:42:48.732Z,1542249768.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:42:53.032Z,1542249773.032 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181114T233847/Courier0055.lzma
2018-11-15T02:42:53.810Z,1542249773.810 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0055.lzma.bak
2018-11-15T02:42:53.810Z,1542249773.810 [DataOverHttps](INFO): SBD MOMSN=8877658
2018-11-15T02:43:02.798Z,1542249782.798 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181114T233847/Express0056.lzma
2018-11-15T02:43:03.562Z,1542249783.562 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0056.lzma.bak
2018-11-15T02:43:03.563Z,1542249783.563 [DataOverHttps](INFO): SBD MOMSN=8877662
2018-11-15T02:43:04.362Z,1542249784.362 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T02:43:04.362Z,1542249784.362 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T02:43:04.362Z,1542249784.362 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T02:44:19.376Z,1542249859.376 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-11-15T02:45:48.790Z,1542249948.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:45:48.790Z,1542249948.790 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-11-15T02:45:48.791Z,1542249948.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:45:48.792Z,1542249948.792 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:45:48.792Z,1542249948.792 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-11-15T02:45:48.797Z,1542249948.797 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:45:48.821Z,1542249948.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:45:48.822Z,1542249948.822 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:45:49.209Z,1542249949.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:45:49.209Z,1542249949.209 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-11-15T02:45:49.210Z,1542249949.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:45:49.210Z,1542249949.210 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-11-15T02:45:49.600Z,1542249949.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:45:49.605Z,1542249949.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:45:49.605Z,1542249949.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:45:49.606Z,1542249949.606 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:45:49.606Z,1542249949.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:45:49.606Z,1542249949.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:45:53.950Z,1542249953.950 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T02:45:53.950Z,1542249953.950 [NAL9602] Data Fault, FailCount= 2
2018-11-15T02:45:53.950Z,1542249953.950 [NAL9602](ERROR): Data Fault
2018-11-15T02:45:54.023Z,1542249954.023 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T02:45:54.346Z,1542249954.346 [NAL9602](INFO): Powering down
2018-11-15T02:45:55.211Z,1542249955.211 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T02:45:55.211Z,1542249955.211 [NAL9602] No Fault, FailCount= 2
2018-11-15T02:46:24.422Z,1542249984.422 [NAL9602](INFO): Powering up NAL9602
2018-11-15T02:46:35.626Z,1542249995.626 [NAL9602](INFO): NAL9602 initialized
2018-11-15T02:48:04.544Z,1542250084.544 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T02:48:04.544Z,1542250084.544 [Default:CheckIn:C.Wait] Stopped
2018-11-15T02:48:04.544Z,1542250084.544 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T02:48:04.544Z,1542250084.544 [Default:CheckIn:D] Running Loop=1
2018-11-15T02:48:04.952Z,1542250084.952 [Default:CheckIn:D] Stopped
2018-11-15T02:48:04.952Z,1542250084.952 [Default:CheckIn:E] Running Loop=1
2018-11-15T02:48:05.345Z,1542250085.345 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 186.103743 min 
2018-11-15T02:48:05.345Z,1542250085.345 [Default:CheckIn:E] Stopped
2018-11-15T02:48:05.346Z,1542250085.346 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T02:48:05.346Z,1542250085.346 [Default:CheckIn] Stopped
2018-11-15T02:48:05.346Z,1542250085.346 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T02:48:05.346Z,1542250085.346 [Default:CheckIn](INFO): Running loop #19
2018-11-15T02:48:05.346Z,1542250085.346 [Default:CheckIn] Running Loop=19
2018-11-15T02:48:05.346Z,1542250085.346 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T02:48:05.346Z,1542250085.346 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T02:48:49.886Z,1542250129.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:48:49.886Z,1542250129.886 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-11-15T02:48:49.886Z,1542250129.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:48:49.888Z,1542250129.888 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:48:49.888Z,1542250129.888 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-11-15T02:48:49.888Z,1542250129.888 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:48:49.900Z,1542250129.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:48:49.900Z,1542250129.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:48:50.325Z,1542250130.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:48:50.325Z,1542250130.325 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-11-15T02:48:50.326Z,1542250130.326 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:48:50.326Z,1542250130.326 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-11-15T02:48:50.713Z,1542250130.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:48:50.714Z,1542250130.714 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:48:50.714Z,1542250130.714 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:48:50.714Z,1542250130.714 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:48:50.715Z,1542250130.715 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:48:50.715Z,1542250130.715 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:49:01.171Z,1542250141.171 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-11-15T02:51:51.099Z,1542250311.099 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:51:51.100Z,1542250311.100 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-11-15T02:51:51.100Z,1542250311.100 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:51:51.106Z,1542250311.106 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:51:51.106Z,1542250311.106 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-11-15T02:51:51.106Z,1542250311.106 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:51:51.125Z,1542250311.125 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:51:51.125Z,1542250311.125 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:51:51.513Z,1542250311.513 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:51:51.513Z,1542250311.513 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-11-15T02:51:51.514Z,1542250311.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:51:51.514Z,1542250311.514 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-11-15T02:51:51.897Z,1542250311.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:51:51.898Z,1542250311.898 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:51:51.898Z,1542250311.898 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:51:51.898Z,1542250311.898 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:51:51.899Z,1542250311.899 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:51:51.900Z,1542250311.900 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:53:07.257Z,1542250387.257 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T02:48:05.3Z
2018-11-15T02:53:07.257Z,1542250387.257 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T02:53:07.257Z,1542250387.257 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T02:53:12.191Z,1542250392.191 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0058.lzma
2018-11-15T02:53:12.954Z,1542250392.954 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0058.lzma.bak
2018-11-15T02:53:12.954Z,1542250392.954 [DataOverHttps](INFO): SBD MOMSN=8877728
2018-11-15T02:53:22.391Z,1542250402.391 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181114T233847/Express0059.lzma
2018-11-15T02:53:23.174Z,1542250403.174 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0059.lzma.bak
2018-11-15T02:53:23.175Z,1542250403.175 [DataOverHttps](INFO): SBD MOMSN=8877730
2018-11-15T02:53:24.257Z,1542250404.257 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T02:53:24.257Z,1542250404.257 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T02:53:24.257Z,1542250404.257 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T02:54:07.778Z,1542250447.778 [CBIT](INFO): Clearing failed state for component DropWeight
2018-11-15T02:54:07.778Z,1542250447.778 [DropWeight] No Fault, FailCount= 1
2018-11-15T02:54:52.223Z,1542250492.223 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:54:52.223Z,1542250492.223 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-11-15T02:54:52.223Z,1542250492.223 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:54:52.229Z,1542250492.229 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:54:52.229Z,1542250492.229 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-11-15T02:54:52.229Z,1542250492.229 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:54:52.267Z,1542250492.267 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:54:52.268Z,1542250492.268 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:54:52.639Z,1542250492.639 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:54:52.639Z,1542250492.639 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-11-15T02:54:52.639Z,1542250492.639 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:54:52.639Z,1542250492.639 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-11-15T02:54:53.032Z,1542250493.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:54:53.032Z,1542250493.032 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:54:53.033Z,1542250493.033 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:54:53.033Z,1542250493.033 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:54:53.034Z,1542250493.034 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:54:53.034Z,1542250493.034 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:56:40.472Z,1542250600.472 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T02:56:40.472Z,1542250600.472 [NAL9602] Data Fault, FailCount= 3
2018-11-15T02:56:40.473Z,1542250600.473 [NAL9602](ERROR): Data Fault
2018-11-15T02:56:40.543Z,1542250600.543 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T02:56:40.874Z,1542250600.874 [NAL9602](INFO): Powering down
2018-11-15T02:56:41.715Z,1542250601.715 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T02:56:41.716Z,1542250601.716 [NAL9602] No Fault, FailCount= 3
2018-11-15T02:57:10.939Z,1542250630.939 [NAL9602](INFO): Powering up NAL9602
2018-11-15T02:57:21.739Z,1542250641.739 [NAL9602](INFO): NAL9602 initialized
2018-11-15T02:57:53.059Z,1542250673.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:57:53.059Z,1542250673.059 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-11-15T02:57:53.059Z,1542250673.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T02:57:53.061Z,1542250673.061 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T02:57:53.061Z,1542250673.061 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-11-15T02:57:53.061Z,1542250673.061 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T02:57:53.073Z,1542250673.073 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T02:57:53.073Z,1542250673.073 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T02:57:53.474Z,1542250673.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T02:57:53.474Z,1542250673.474 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-11-15T02:57:53.474Z,1542250673.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T02:57:53.474Z,1542250673.474 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-11-15T02:57:53.861Z,1542250673.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T02:57:53.862Z,1542250673.862 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:57:53.862Z,1542250673.862 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:57:53.862Z,1542250673.862 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T02:57:53.863Z,1542250673.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T02:57:53.863Z,1542250673.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T02:58:24.732Z,1542250704.732 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T02:58:24.732Z,1542250704.732 [Default:CheckIn:C.Wait] Stopped
2018-11-15T02:58:24.732Z,1542250704.732 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T02:58:24.732Z,1542250704.732 [Default:CheckIn:D] Running Loop=1
2018-11-15T02:58:25.145Z,1542250705.145 [Default:CheckIn:D] Stopped
2018-11-15T02:58:25.145Z,1542250705.145 [Default:CheckIn:E] Running Loop=1
2018-11-15T02:58:25.536Z,1542250705.536 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 196.440299 min 
2018-11-15T02:58:25.537Z,1542250705.537 [Default:CheckIn:E] Stopped
2018-11-15T02:58:25.537Z,1542250705.537 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T02:58:25.537Z,1542250705.537 [Default:CheckIn] Stopped
2018-11-15T02:58:25.537Z,1542250705.537 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T02:58:25.537Z,1542250705.537 [Default:CheckIn](INFO): Running loop #20
2018-11-15T02:58:25.538Z,1542250705.538 [Default:CheckIn] Running Loop=20
2018-11-15T02:58:25.538Z,1542250705.538 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T02:58:25.538Z,1542250705.538 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T03:00:54.278Z,1542250854.278 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:00:54.278Z,1542250854.278 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-11-15T03:00:54.278Z,1542250854.278 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:00:54.280Z,1542250854.280 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:00:54.280Z,1542250854.280 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-11-15T03:00:54.280Z,1542250854.280 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:00:54.305Z,1542250854.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:00:54.305Z,1542250854.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:00:54.677Z,1542250854.677 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:00:54.677Z,1542250854.677 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-11-15T03:00:54.678Z,1542250854.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:00:54.678Z,1542250854.678 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-11-15T03:00:55.071Z,1542250855.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:00:55.072Z,1542250855.072 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:00:55.072Z,1542250855.072 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:00:55.077Z,1542250855.077 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:00:55.077Z,1542250855.077 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:00:55.078Z,1542250855.078 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:03:27.369Z,1542251007.369 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T02:58:25.5Z
2018-11-15T03:03:27.370Z,1542251007.370 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T03:03:27.370Z,1542251007.370 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T03:03:32.324Z,1542251012.324 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0061.lzma
2018-11-15T03:03:33.102Z,1542251013.102 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0061.lzma.bak
2018-11-15T03:03:33.102Z,1542251013.102 [DataOverHttps](INFO): SBD MOMSN=8877797
2018-11-15T03:03:42.310Z,1542251022.310 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181114T233847/Express0062.lzma
2018-11-15T03:03:43.106Z,1542251023.106 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0062.lzma.bak
2018-11-15T03:03:43.106Z,1542251023.106 [DataOverHttps](INFO): SBD MOMSN=8877799
2018-11-15T03:03:43.948Z,1542251023.948 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T03:03:43.948Z,1542251023.948 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T03:03:43.949Z,1542251023.949 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T03:03:55.328Z,1542251035.328 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:03:55.328Z,1542251035.328 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-11-15T03:03:55.328Z,1542251035.328 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:03:55.331Z,1542251035.331 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:03:55.331Z,1542251035.331 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-11-15T03:03:55.331Z,1542251035.331 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:03:55.343Z,1542251035.343 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:03:55.343Z,1542251035.343 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:03:55.745Z,1542251035.745 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:03:55.745Z,1542251035.745 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-11-15T03:03:55.746Z,1542251035.746 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:03:55.746Z,1542251035.746 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-11-15T03:03:56.143Z,1542251036.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:03:56.144Z,1542251036.144 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:03:56.144Z,1542251036.144 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:03:56.144Z,1542251036.144 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:03:56.145Z,1542251036.145 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:03:56.146Z,1542251036.146 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:05:51.796Z,1542251151.796 [BPC1](ERROR): BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).
2018-11-15T03:06:56.362Z,1542251216.362 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:06:56.362Z,1542251216.362 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-11-15T03:06:56.362Z,1542251216.362 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:06:56.364Z,1542251216.364 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:06:56.364Z,1542251216.364 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-11-15T03:06:56.364Z,1542251216.364 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:06:56.405Z,1542251216.405 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:06:56.405Z,1542251216.405 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:06:56.773Z,1542251216.773 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:06:56.773Z,1542251216.773 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-11-15T03:06:56.774Z,1542251216.774 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:06:56.774Z,1542251216.774 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-11-15T03:06:57.172Z,1542251217.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:06:57.172Z,1542251217.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:06:57.177Z,1542251217.177 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:06:57.177Z,1542251217.177 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:06:57.178Z,1542251217.178 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:06:57.178Z,1542251217.178 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:07:24.035Z,1542251244.035 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T03:07:24.035Z,1542251244.035 [NAL9602] Data Fault, FailCount= 4
2018-11-15T03:07:24.035Z,1542251244.035 [NAL9602](ERROR): Data Fault
2018-11-15T03:07:24.131Z,1542251244.131 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T03:07:24.431Z,1542251244.431 [NAL9602](INFO): Powering down
2018-11-15T03:07:25.302Z,1542251245.302 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T03:07:25.313Z,1542251245.313 [NAL9602] No Fault, FailCount= 4
2018-11-15T03:07:54.538Z,1542251274.538 [NAL9602](INFO): Powering up NAL9602
2018-11-15T03:08:05.726Z,1542251285.726 [NAL9602](INFO): NAL9602 initialized
2018-11-15T03:08:44.224Z,1542251324.224 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T03:08:44.224Z,1542251324.224 [Default:CheckIn:C.Wait] Stopped
2018-11-15T03:08:44.224Z,1542251324.224 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T03:08:44.224Z,1542251324.224 [Default:CheckIn:D] Running Loop=1
2018-11-15T03:08:44.651Z,1542251324.651 [Default:CheckIn:D] Stopped
2018-11-15T03:08:44.651Z,1542251324.651 [Default:CheckIn:E] Running Loop=1
2018-11-15T03:08:45.048Z,1542251325.048 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 206.765397 min 
2018-11-15T03:08:45.048Z,1542251325.048 [Default:CheckIn:E] Stopped
2018-11-15T03:08:45.048Z,1542251325.048 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T03:08:45.048Z,1542251325.048 [Default:CheckIn] Stopped
2018-11-15T03:08:45.048Z,1542251325.048 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T03:08:45.048Z,1542251325.048 [Default:CheckIn](INFO): Running loop #21
2018-11-15T03:08:45.053Z,1542251325.053 [Default:CheckIn] Running Loop=21
2018-11-15T03:08:45.053Z,1542251325.053 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T03:08:45.053Z,1542251325.053 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T03:08:49.017Z,1542251329.017 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-11-15T03:09:56.336Z,1542251396.336 [RDI_Pathfinder](ERROR): Failed to parse:
:B  +0.00,        +0.00,        +0.00,   0.00,12637.99
2018-11-15T03:09:57.534Z,1542251397.534 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:09:57.534Z,1542251397.534 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-11-15T03:09:57.535Z,1542251397.535 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:09:57.536Z,1542251397.536 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:09:57.536Z,1542251397.536 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-11-15T03:09:57.541Z,1542251397.541 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:09:57.566Z,1542251397.566 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:09:57.567Z,1542251397.567 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:09:57.961Z,1542251397.961 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:09:57.961Z,1542251397.961 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-11-15T03:09:57.962Z,1542251397.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:09:57.962Z,1542251397.962 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-11-15T03:09:58.353Z,1542251398.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:09:58.354Z,1542251398.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:09:58.354Z,1542251398.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:09:58.354Z,1542251398.354 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:09:58.355Z,1542251398.355 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:09:58.355Z,1542251398.355 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:12:58.426Z,1542251578.426 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:12:58.426Z,1542251578.426 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-11-15T03:12:58.426Z,1542251578.426 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:12:58.428Z,1542251578.428 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:12:58.428Z,1542251578.428 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-11-15T03:12:58.428Z,1542251578.428 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:12:58.455Z,1542251578.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:12:58.456Z,1542251578.456 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:12:58.835Z,1542251578.835 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:12:58.835Z,1542251578.835 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-11-15T03:12:58.836Z,1542251578.836 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:12:58.836Z,1542251578.836 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-11-15T03:12:59.225Z,1542251579.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:12:59.226Z,1542251579.226 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:12:59.227Z,1542251579.227 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:12:59.227Z,1542251579.227 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:12:59.228Z,1542251579.228 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:12:59.229Z,1542251579.229 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:13:46.886Z,1542251626.886 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T03:08:45.1Z
2018-11-15T03:13:46.886Z,1542251626.886 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T03:13:46.886Z,1542251626.886 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T03:13:51.846Z,1542251631.846 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181114T233847/Courier0064.lzma
2018-11-15T03:13:52.627Z,1542251632.627 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0064.lzma.bak
2018-11-15T03:13:52.627Z,1542251632.627 [DataOverHttps](INFO): SBD MOMSN=8877871
2018-11-15T03:14:01.758Z,1542251641.758 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181114T233847/Express0065.lzma
2018-11-15T03:14:02.522Z,1542251642.522 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0065.lzma.bak
2018-11-15T03:14:02.523Z,1542251642.523 [DataOverHttps](INFO): SBD MOMSN=8877873
2018-11-15T03:14:03.341Z,1542251643.341 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T03:14:03.341Z,1542251643.341 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T03:14:03.341Z,1542251643.341 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T03:15:59.410Z,1542251759.410 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:15:59.410Z,1542251759.410 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-11-15T03:15:59.410Z,1542251759.410 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:15:59.412Z,1542251759.412 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:15:59.412Z,1542251759.412 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-11-15T03:15:59.412Z,1542251759.412 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:15:59.437Z,1542251759.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:15:59.437Z,1542251759.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:15:59.837Z,1542251759.837 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:15:59.837Z,1542251759.837 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-11-15T03:15:59.838Z,1542251759.838 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:15:59.838Z,1542251759.838 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-11-15T03:16:00.204Z,1542251760.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:16:00.205Z,1542251760.205 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:16:00.205Z,1542251760.205 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:16:00.206Z,1542251760.206 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:16:00.206Z,1542251760.206 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:16:00.206Z,1542251760.206 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:18:08.794Z,1542251888.794 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T03:18:08.795Z,1542251888.795 [NAL9602] Data Fault, FailCount= 5
2018-11-15T03:18:08.795Z,1542251888.795 [NAL9602](ERROR): Data Fault
2018-11-15T03:18:08.862Z,1542251888.862 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T03:18:08.863Z,1542251888.863 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-11-15T03:18:09.190Z,1542251889.190 [NAL9602](INFO): Powering down
2018-11-15T03:18:09.272Z,1542251889.272 [CBIT](INFO): Critical error at 20181115T031808
2018-11-15T03:19:00.548Z,1542251940.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:19:00.548Z,1542251940.548 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-11-15T03:19:00.548Z,1542251940.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:19:00.550Z,1542251940.550 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:19:00.550Z,1542251940.550 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-11-15T03:19:00.550Z,1542251940.550 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:19:00.579Z,1542251940.579 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:19:00.579Z,1542251940.579 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:19:00.975Z,1542251940.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:19:00.975Z,1542251940.975 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-11-15T03:19:00.975Z,1542251940.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:19:00.975Z,1542251940.975 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-11-15T03:19:01.345Z,1542251941.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:19:01.346Z,1542251941.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:19:01.346Z,1542251941.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:19:01.346Z,1542251941.346 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:19:01.347Z,1542251941.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:19:01.347Z,1542251941.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:19:03.744Z,1542251943.744 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T03:19:03.744Z,1542251943.744 [Default:CheckIn:C.Wait] Stopped
2018-11-15T03:19:03.744Z,1542251943.744 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T03:19:03.744Z,1542251943.744 [Default:CheckIn:D] Running Loop=1
2018-11-15T03:19:04.149Z,1542251944.149 [Default:CheckIn:D] Stopped
2018-11-15T03:19:04.149Z,1542251944.149 [Default:CheckIn:E] Running Loop=1
2018-11-15T03:19:04.540Z,1542251944.540 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 217.090348 min 
2018-11-15T03:19:04.545Z,1542251944.545 [Default:CheckIn:E] Stopped
2018-11-15T03:19:04.545Z,1542251944.545 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T03:19:04.545Z,1542251944.545 [Default:CheckIn] Stopped
2018-11-15T03:19:04.545Z,1542251944.545 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T03:19:04.545Z,1542251944.545 [Default:CheckIn](INFO): Running loop #22
2018-11-15T03:19:04.545Z,1542251944.545 [Default:CheckIn] Running Loop=22
2018-11-15T03:19:04.545Z,1542251944.545 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T03:19:04.546Z,1542251944.546 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T03:20:09.066Z,1542252009.066 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T03:20:09.066Z,1542252009.066 [NAL9602] No Fault, FailCount= 5
2018-11-15T03:20:09.427Z,1542252009.427 [NAL9602](INFO): Powering up NAL9602
2018-11-15T03:20:20.626Z,1542252020.626 [NAL9602](INFO): NAL9602 initialized
2018-11-15T03:22:01.694Z,1542252121.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:22:01.694Z,1542252121.694 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2018-11-15T03:22:01.694Z,1542252121.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:22:01.696Z,1542252121.696 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:22:01.696Z,1542252121.696 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2018-11-15T03:22:01.696Z,1542252121.696 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:22:01.725Z,1542252121.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:22:01.725Z,1542252121.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:22:02.141Z,1542252122.141 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:22:02.141Z,1542252122.141 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2018-11-15T03:22:02.141Z,1542252122.141 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:22:02.141Z,1542252122.141 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2018-11-15T03:22:02.526Z,1542252122.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:22:02.526Z,1542252122.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:22:02.527Z,1542252122.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:22:02.527Z,1542252122.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:22:02.527Z,1542252122.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:22:02.528Z,1542252122.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:24:06.774Z,1542252246.774 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T03:19:04.5Z
2018-11-15T03:24:06.774Z,1542252246.774 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T03:24:06.774Z,1542252246.774 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T03:24:11.702Z,1542252251.702 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181114T233847/Courier0067.lzma
2018-11-15T03:24:11.742Z,1542252251.742 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-11-15T03:24:11.742Z,1542252251.742 [DropWeight] Hardware Fault, FailCount= 1
2018-11-15T03:24:11.742Z,1542252251.742 [DropWeight](ERROR): Hardware Fault
2018-11-15T03:24:11.805Z,1542252251.805 [CBIT](INFO): Critical error at 20181115T032411
2018-11-15T03:24:11.808Z,1542252251.808 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-11-15T03:24:11.808Z,1542252251.808 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-11-15T03:24:12.169Z,1542252252.169 [CBIT](INFO): Critical error at 20181115T032411
2018-11-15T03:24:12.478Z,1542252252.478 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0067.lzma.bak
2018-11-15T03:24:12.479Z,1542252252.479 [DataOverHttps](INFO): SBD MOMSN=8877938
2018-11-15T03:24:21.594Z,1542252261.594 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181114T233847/Express0068.lzma
2018-11-15T03:24:22.374Z,1542252262.374 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0068.lzma.bak
2018-11-15T03:24:22.374Z,1542252262.374 [DataOverHttps](INFO): SBD MOMSN=8877941
2018-11-15T03:24:23.227Z,1542252263.227 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T03:24:23.227Z,1542252263.227 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T03:24:23.227Z,1542252263.227 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T03:25:02.710Z,1542252302.710 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:25:02.710Z,1542252302.710 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2018-11-15T03:25:02.711Z,1542252302.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:25:02.712Z,1542252302.712 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:25:02.712Z,1542252302.712 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2018-11-15T03:25:02.713Z,1542252302.713 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:25:02.725Z,1542252302.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:25:02.725Z,1542252302.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:25:03.121Z,1542252303.121 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:25:03.121Z,1542252303.121 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2018-11-15T03:25:03.122Z,1542252303.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:25:03.122Z,1542252303.122 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2018-11-15T03:25:03.485Z,1542252303.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:25:03.485Z,1542252303.485 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:25:03.486Z,1542252303.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:25:03.486Z,1542252303.486 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:25:03.487Z,1542252303.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:25:03.487Z,1542252303.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:28:03.554Z,1542252483.554 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:28:03.555Z,1542252483.555 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2018-11-15T03:28:03.555Z,1542252483.555 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:28:03.556Z,1542252483.556 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:28:03.561Z,1542252483.561 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2018-11-15T03:28:03.561Z,1542252483.561 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:28:03.590Z,1542252483.590 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:28:03.590Z,1542252483.590 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:28:03.997Z,1542252483.997 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:28:03.997Z,1542252483.997 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2018-11-15T03:28:03.998Z,1542252483.998 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:28:03.998Z,1542252483.998 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2018-11-15T03:28:04.358Z,1542252484.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:28:04.358Z,1542252484.358 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:28:04.359Z,1542252484.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:28:04.359Z,1542252484.359 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:28:04.360Z,1542252484.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:28:04.360Z,1542252484.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:29:10.535Z,1542252550.535 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.840,*-0.006,*0.000
2018-11-15T03:29:23.344Z,1542252563.344 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T03:29:23.344Z,1542252563.344 [Default:CheckIn:C.Wait] Stopped
2018-11-15T03:29:23.344Z,1542252563.344 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T03:29:23.344Z,1542252563.344 [Default:CheckIn:D] Running Loop=1
2018-11-15T03:29:23.732Z,1542252563.732 [Default:CheckIn:D] Stopped
2018-11-15T03:29:23.732Z,1542252563.732 [Default:CheckIn:E] Running Loop=1
2018-11-15T03:29:24.150Z,1542252564.150 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 227.416748 min 
2018-11-15T03:29:24.150Z,1542252564.150 [Default:CheckIn:E] Stopped
2018-11-15T03:29:24.151Z,1542252564.151 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T03:29:24.151Z,1542252564.151 [Default:CheckIn] Stopped
2018-11-15T03:29:24.151Z,1542252564.151 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T03:29:24.151Z,1542252564.151 [Default:CheckIn](INFO): Running loop #23
2018-11-15T03:29:24.151Z,1542252564.151 [Default:CheckIn] Running Loop=23
2018-11-15T03:29:24.151Z,1542252564.151 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T03:29:24.151Z,1542252564.151 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T03:30:22.631Z,1542252622.631 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T03:30:22.631Z,1542252622.631 [NAL9602] Data Fault, FailCount= 1
2018-11-15T03:30:22.631Z,1542252622.631 [NAL9602](ERROR): Data Fault
2018-11-15T03:30:22.698Z,1542252622.698 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T03:30:23.026Z,1542252623.026 [NAL9602](INFO): Powering down
2018-11-15T03:30:23.910Z,1542252623.910 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T03:30:23.910Z,1542252623.910 [NAL9602] No Fault, FailCount= 1
2018-11-15T03:30:55.010Z,1542252655.010 [NAL9602](INFO): Powering up NAL9602
2018-11-15T03:31:04.742Z,1542252664.742 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:31:04.742Z,1542252664.742 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2018-11-15T03:31:04.742Z,1542252664.742 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:31:04.746Z,1542252664.746 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:31:04.746Z,1542252664.746 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2018-11-15T03:31:04.747Z,1542252664.747 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:31:04.793Z,1542252664.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:31:04.794Z,1542252664.794 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:31:05.164Z,1542252665.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:31:05.181Z,1542252665.181 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2018-11-15T03:31:05.181Z,1542252665.181 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:31:05.181Z,1542252665.181 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2018-11-15T03:31:05.551Z,1542252665.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:31:05.551Z,1542252665.551 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:31:05.551Z,1542252665.551 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:31:05.552Z,1542252665.552 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:31:05.552Z,1542252665.552 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:31:05.557Z,1542252665.557 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:31:05.910Z,1542252665.910 [NAL9602](INFO): NAL9602 initialized
2018-11-15T03:34:05.648Z,1542252845.648 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:34:05.648Z,1542252845.648 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2018-11-15T03:34:05.648Z,1542252845.648 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:34:05.650Z,1542252845.650 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:34:05.650Z,1542252845.650 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2018-11-15T03:34:05.650Z,1542252845.650 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:34:05.663Z,1542252845.663 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:34:05.664Z,1542252845.664 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:34:06.070Z,1542252846.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:34:06.070Z,1542252846.070 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2018-11-15T03:34:06.070Z,1542252846.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:34:06.070Z,1542252846.070 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2018-11-15T03:34:06.433Z,1542252846.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:34:06.434Z,1542252846.434 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:34:06.434Z,1542252846.434 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:34:06.434Z,1542252846.434 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:34:06.435Z,1542252846.435 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:34:06.435Z,1542252846.435 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:34:26.815Z,1542252866.815 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T03:29:24.2Z
2018-11-15T03:34:26.815Z,1542252866.815 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T03:34:26.815Z,1542252866.815 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T03:34:31.748Z,1542252871.748 [DataOverHttps](INFO): Sending 104 bytes from file Logs/20181114T233847/Courier0070.lzma
2018-11-15T03:34:32.522Z,1542252872.522 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0070.lzma.bak
2018-11-15T03:34:32.522Z,1542252872.522 [DataOverHttps](INFO): SBD MOMSN=8878003
2018-11-15T03:34:41.588Z,1542252881.588 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181114T233847/Express0071.lzma
2018-11-15T03:34:42.374Z,1542252882.374 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0071.lzma.bak
2018-11-15T03:34:42.374Z,1542252882.374 [DataOverHttps](INFO): SBD MOMSN=8878007
2018-11-15T03:34:43.206Z,1542252883.206 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T03:34:43.206Z,1542252883.206 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T03:34:43.206Z,1542252883.206 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T03:35:23.160Z,1542252923.160 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-11-15T03:36:18.445Z,1542252978.445 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.867,*0.002,*65.535
2018-11-15T03:37:07.691Z,1542253027.691 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:37:07.691Z,1542253027.691 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2018-11-15T03:37:07.691Z,1542253027.691 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:37:07.693Z,1542253027.693 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:37:07.693Z,1542253027.693 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2018-11-15T03:37:07.693Z,1542253027.693 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:37:07.706Z,1542253027.706 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:37:07.706Z,1542253027.706 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:37:07.850Z,1542253027.850 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:37:07.850Z,1542253027.850 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2018-11-15T03:37:07.851Z,1542253027.851 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:37:07.851Z,1542253027.851 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2018-11-15T03:37:08.169Z,1542253028.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:37:08.169Z,1542253028.169 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:37:08.170Z,1542253028.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:37:08.170Z,1542253028.170 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:37:08.170Z,1542253028.170 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:37:08.171Z,1542253028.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:38:14.227Z,1542253094.227 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-11-15T03:38:14.227Z,1542253094.227 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-2768,-32768,V
2018-11-15T03:39:12.031Z,1542253152.031 [CBIT](INFO): Clearing failed state for component DropWeight
2018-11-15T03:39:12.031Z,1542253152.031 [DropWeight] No Fault, FailCount= 1
2018-11-15T03:39:43.656Z,1542253183.656 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T03:39:43.656Z,1542253183.656 [Default:CheckIn:C.Wait] Stopped
2018-11-15T03:39:43.656Z,1542253183.656 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T03:39:43.656Z,1542253183.656 [Default:CheckIn:D] Running Loop=1
2018-11-15T03:39:44.059Z,1542253184.059 [Default:CheckIn:D] Stopped
2018-11-15T03:39:44.059Z,1542253184.059 [Default:CheckIn:E] Running Loop=1
2018-11-15T03:39:44.444Z,1542253184.444 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 237.755518 min 
2018-11-15T03:39:44.444Z,1542253184.444 [Default:CheckIn:E] Stopped
2018-11-15T03:39:44.449Z,1542253184.449 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T03:39:44.449Z,1542253184.449 [Default:CheckIn] Stopped
2018-11-15T03:39:44.449Z,1542253184.449 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T03:39:44.449Z,1542253184.449 [Default:CheckIn](INFO): Running loop #24
2018-11-15T03:39:44.449Z,1542253184.449 [Default:CheckIn] Running Loop=24
2018-11-15T03:39:44.449Z,1542253184.449 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T03:39:44.450Z,1542253184.450 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T03:40:08.513Z,1542253208.513 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:40:08.513Z,1542253208.513 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2018-11-15T03:40:08.513Z,1542253208.513 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:40:08.515Z,1542253208.515 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:40:08.515Z,1542253208.515 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2018-11-15T03:40:08.515Z,1542253208.515 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:40:08.540Z,1542253208.540 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:40:08.540Z,1542253208.540 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:40:08.937Z,1542253208.937 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:40:08.937Z,1542253208.937 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2018-11-15T03:40:08.938Z,1542253208.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:40:08.938Z,1542253208.938 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2018-11-15T03:40:09.337Z,1542253209.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:40:09.338Z,1542253209.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:40:09.338Z,1542253209.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:40:09.338Z,1542253209.338 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:40:09.339Z,1542253209.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:40:09.339Z,1542253209.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:41:08.242Z,1542253268.242 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T03:41:08.242Z,1542253268.242 [NAL9602] Data Fault, FailCount= 2
2018-11-15T03:41:08.243Z,1542253268.243 [NAL9602](ERROR): Data Fault
2018-11-15T03:41:08.329Z,1542253268.329 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T03:41:08.638Z,1542253268.638 [NAL9602](INFO): Powering down
2018-11-15T03:41:09.525Z,1542253269.525 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T03:41:09.525Z,1542253269.525 [NAL9602] No Fault, FailCount= 2
2018-11-15T03:41:38.723Z,1542253298.723 [NAL9602](INFO): Powering up NAL9602
2018-11-15T03:41:50.379Z,1542253310.379 [NAL9602](INFO): NAL9602 initialized
2018-11-15T03:43:09.710Z,1542253389.710 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:43:09.711Z,1542253389.711 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2018-11-15T03:43:09.711Z,1542253389.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:43:09.712Z,1542253389.712 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:43:09.717Z,1542253389.717 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2018-11-15T03:43:09.719Z,1542253389.719 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:43:09.744Z,1542253389.744 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:43:09.744Z,1542253389.744 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:43:10.133Z,1542253390.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:43:10.133Z,1542253390.133 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2018-11-15T03:43:10.134Z,1542253390.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:43:10.134Z,1542253390.134 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2018-11-15T03:43:10.517Z,1542253390.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:43:10.517Z,1542253390.517 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:43:10.518Z,1542253390.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:43:10.518Z,1542253390.518 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:43:10.519Z,1542253390.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:43:10.519Z,1542253390.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:43:27.290Z,1542253407.290 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-11-15T03:44:46.278Z,1542253486.278 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T03:39:44.4Z
2018-11-15T03:44:46.278Z,1542253486.278 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T03:44:46.278Z,1542253486.278 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T03:44:51.208Z,1542253491.208 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0073.lzma
2018-11-15T03:44:51.978Z,1542253491.978 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0073.lzma.bak
2018-11-15T03:44:51.978Z,1542253491.978 [DataOverHttps](INFO): SBD MOMSN=8878078
2018-11-15T03:45:01.296Z,1542253501.296 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181114T233847/Express0074.lzma
2018-11-15T03:45:02.090Z,1542253502.090 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0074.lzma.bak
2018-11-15T03:45:02.090Z,1542253502.090 [DataOverHttps](INFO): SBD MOMSN=8878080
2018-11-15T03:45:02.943Z,1542253502.943 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T03:45:02.943Z,1542253502.943 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T03:45:02.943Z,1542253502.943 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T03:46:10.738Z,1542253570.738 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:46:10.738Z,1542253570.738 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2018-11-15T03:46:10.738Z,1542253570.738 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:46:10.740Z,1542253570.740 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:46:10.740Z,1542253570.740 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2018-11-15T03:46:10.740Z,1542253570.740 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:46:10.776Z,1542253570.776 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:46:10.776Z,1542253570.776 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:46:11.173Z,1542253571.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:46:11.173Z,1542253571.173 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2018-11-15T03:46:11.174Z,1542253571.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:46:11.174Z,1542253571.174 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2018-11-15T03:46:11.545Z,1542253571.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:46:11.546Z,1542253571.546 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:46:11.546Z,1542253571.546 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:46:11.546Z,1542253571.546 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:46:11.547Z,1542253571.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:46:11.547Z,1542253571.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:46:28.445Z,1542253588.445 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-11-15T03:46:28.446Z,1542253588.446 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-3278,-32768,V
2018-11-15T03:49:13.573Z,1542253753.573 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:49:13.574Z,1542253753.574 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2018-11-15T03:49:13.574Z,1542253753.574 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:49:13.575Z,1542253753.575 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:49:13.576Z,1542253753.576 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2018-11-15T03:49:13.576Z,1542253753.576 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:49:13.588Z,1542253753.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:49:13.588Z,1542253753.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:49:13.729Z,1542253753.729 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:49:13.729Z,1542253753.729 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2018-11-15T03:49:13.730Z,1542253753.730 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:49:13.730Z,1542253753.730 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2018-11-15T03:49:14.067Z,1542253754.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:49:14.068Z,1542253754.068 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:49:14.068Z,1542253754.068 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:49:14.069Z,1542253754.069 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:49:14.069Z,1542253754.069 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:49:14.070Z,1542253754.070 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:50:03.299Z,1542253803.299 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T03:50:03.300Z,1542253803.300 [Default:CheckIn:C.Wait] Stopped
2018-11-15T03:50:03.300Z,1542253803.300 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T03:50:03.300Z,1542253803.300 [Default:CheckIn:D] Running Loop=1
2018-11-15T03:50:03.708Z,1542253803.708 [Default:CheckIn:D] Stopped
2018-11-15T03:50:03.708Z,1542253803.708 [Default:CheckIn:E] Running Loop=1
2018-11-15T03:50:04.112Z,1542253804.112 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 248.083008 min 
2018-11-15T03:50:04.113Z,1542253804.113 [Default:CheckIn:E] Stopped
2018-11-15T03:50:04.113Z,1542253804.113 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T03:50:04.113Z,1542253804.113 [Default:CheckIn] Stopped
2018-11-15T03:50:04.113Z,1542253804.113 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T03:50:04.113Z,1542253804.113 [Default:CheckIn](INFO): Running loop #25
2018-11-15T03:50:04.113Z,1542253804.113 [Default:CheckIn] Running Loop=25
2018-11-15T03:50:04.114Z,1542253804.114 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T03:50:04.114Z,1542253804.114 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T03:51:51.899Z,1542253911.899 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T03:51:51.899Z,1542253911.899 [NAL9602] Data Fault, FailCount= 3
2018-11-15T03:51:51.899Z,1542253911.899 [NAL9602](ERROR): Data Fault
2018-11-15T03:51:51.987Z,1542253911.987 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T03:51:52.298Z,1542253912.298 [NAL9602](INFO): Powering down
2018-11-15T03:51:53.164Z,1542253913.164 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T03:51:53.164Z,1542253913.164 [NAL9602] No Fault, FailCount= 3
2018-11-15T03:52:14.362Z,1542253934.362 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:52:14.362Z,1542253934.362 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2018-11-15T03:52:14.362Z,1542253934.362 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:52:14.364Z,1542253934.364 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:52:14.364Z,1542253934.364 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2018-11-15T03:52:14.364Z,1542253934.364 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:52:14.421Z,1542253934.421 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:52:14.421Z,1542253934.421 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:52:14.788Z,1542253934.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:52:14.788Z,1542253934.788 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2018-11-15T03:52:14.788Z,1542253934.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:52:14.793Z,1542253934.793 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2018-11-15T03:52:15.228Z,1542253935.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:52:15.237Z,1542253935.237 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:52:15.237Z,1542253935.237 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:52:15.238Z,1542253935.238 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:52:15.238Z,1542253935.238 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:52:15.239Z,1542253935.239 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:52:22.334Z,1542253942.334 [NAL9602](INFO): Powering up NAL9602
2018-11-15T03:52:33.535Z,1542253953.535 [NAL9602](INFO): NAL9602 initialized
2018-11-15T03:55:06.316Z,1542254106.316 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T03:50:04.1Z
2018-11-15T03:55:06.316Z,1542254106.316 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T03:55:06.316Z,1542254106.316 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T03:55:11.243Z,1542254111.243 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0076.lzma
2018-11-15T03:55:12.014Z,1542254112.014 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0076.lzma.bak
2018-11-15T03:55:12.014Z,1542254112.014 [DataOverHttps](INFO): SBD MOMSN=8878149
2018-11-15T03:55:16.127Z,1542254116.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:55:16.127Z,1542254116.127 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2018-11-15T03:55:16.128Z,1542254116.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:55:16.129Z,1542254116.129 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:55:16.129Z,1542254116.129 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2018-11-15T03:55:16.130Z,1542254116.130 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:55:16.170Z,1542254116.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:55:16.170Z,1542254116.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:55:16.266Z,1542254116.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:55:16.266Z,1542254116.266 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2018-11-15T03:55:16.266Z,1542254116.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:55:16.266Z,1542254116.266 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2018-11-15T03:55:16.637Z,1542254116.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:55:16.638Z,1542254116.638 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:55:16.638Z,1542254116.638 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:55:16.639Z,1542254116.639 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:55:16.639Z,1542254116.639 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:55:16.639Z,1542254116.639 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:55:21.112Z,1542254121.112 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181114T233847/Express0077.lzma
2018-11-15T03:55:21.874Z,1542254121.874 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0077.lzma.bak
2018-11-15T03:55:21.874Z,1542254121.874 [DataOverHttps](INFO): SBD MOMSN=8878151
2018-11-15T03:55:22.692Z,1542254122.692 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T03:55:22.692Z,1542254122.692 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T03:55:22.692Z,1542254122.692 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T03:55:41.246Z,1542254141.246 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-11-15T03:55:41.246Z,1542254141.246 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-3278,-32768,V
2018-11-15T03:58:16.662Z,1542254296.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:58:16.662Z,1542254296.662 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2018-11-15T03:58:16.663Z,1542254296.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T03:58:16.664Z,1542254296.664 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T03:58:16.664Z,1542254296.664 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2018-11-15T03:58:16.669Z,1542254296.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T03:58:16.697Z,1542254296.697 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T03:58:16.697Z,1542254296.697 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T03:58:17.097Z,1542254297.097 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T03:58:17.097Z,1542254297.097 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2018-11-15T03:58:17.098Z,1542254297.098 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T03:58:17.098Z,1542254297.098 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2018-11-15T03:58:17.481Z,1542254297.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T03:58:17.482Z,1542254297.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:58:17.482Z,1542254297.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T03:58:17.483Z,1542254297.483 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T03:58:17.483Z,1542254297.483 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T03:58:17.483Z,1542254297.483 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:00:23.087Z,1542254423.087 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T04:00:23.087Z,1542254423.087 [Default:CheckIn:C.Wait] Stopped
2018-11-15T04:00:23.087Z,1542254423.087 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T04:00:23.087Z,1542254423.087 [Default:CheckIn:D] Running Loop=1
2018-11-15T04:00:23.469Z,1542254423.469 [Default:CheckIn:D] Stopped
2018-11-15T04:00:23.469Z,1542254423.469 [Default:CheckIn:E] Running Loop=1
2018-11-15T04:00:23.888Z,1542254423.888 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 258.412354 min 
2018-11-15T04:00:23.888Z,1542254423.888 [Default:CheckIn:E] Stopped
2018-11-15T04:00:23.888Z,1542254423.888 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T04:00:23.888Z,1542254423.888 [Default:CheckIn] Stopped
2018-11-15T04:00:23.888Z,1542254423.888 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T04:00:23.888Z,1542254423.888 [Default:CheckIn](INFO): Running loop #26
2018-11-15T04:00:23.888Z,1542254423.888 [Default:CheckIn] Running Loop=26
2018-11-15T04:00:23.889Z,1542254423.889 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T04:00:23.889Z,1542254423.889 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T04:01:19.114Z,1542254479.114 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:01:19.114Z,1542254479.114 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2018-11-15T04:01:19.114Z,1542254479.114 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T04:01:19.115Z,1542254479.115 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:01:19.116Z,1542254479.116 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2018-11-15T04:01:19.116Z,1542254479.116 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T04:01:19.128Z,1542254479.128 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:01:19.128Z,1542254479.128 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:01:19.312Z,1542254479.312 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T04:01:19.313Z,1542254479.313 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2018-11-15T04:01:19.313Z,1542254479.313 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T04:01:19.313Z,1542254479.313 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2018-11-15T04:01:19.626Z,1542254479.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T04:01:19.626Z,1542254479.626 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:01:19.627Z,1542254479.627 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:01:19.627Z,1542254479.627 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T04:01:19.627Z,1542254479.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:01:19.628Z,1542254479.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:02:35.319Z,1542254555.319 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T04:02:35.319Z,1542254555.319 [NAL9602] Data Fault, FailCount= 4
2018-11-15T04:02:35.319Z,1542254555.319 [NAL9602](ERROR): Data Fault
2018-11-15T04:02:35.390Z,1542254555.390 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T04:02:35.726Z,1542254555.726 [NAL9602](INFO): Powering down
2018-11-15T04:02:36.563Z,1542254556.563 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T04:02:36.563Z,1542254556.563 [NAL9602] No Fault, FailCount= 4
2018-11-15T04:03:05.815Z,1542254585.815 [NAL9602](INFO): Powering up NAL9602
2018-11-15T04:03:16.614Z,1542254596.614 [NAL9602](INFO): NAL9602 initialized
2018-11-15T04:04:19.647Z,1542254659.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:04:19.647Z,1542254659.647 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2018-11-15T04:04:19.647Z,1542254659.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T04:04:19.649Z,1542254659.649 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:04:19.650Z,1542254659.650 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2018-11-15T04:04:19.650Z,1542254659.650 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T04:04:19.662Z,1542254659.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:04:19.662Z,1542254659.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:04:20.061Z,1542254660.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T04:04:20.061Z,1542254660.061 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2018-11-15T04:04:20.062Z,1542254660.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T04:04:20.062Z,1542254660.062 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2018-11-15T04:04:20.461Z,1542254660.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T04:04:20.462Z,1542254660.462 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:04:20.462Z,1542254660.462 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:04:20.462Z,1542254660.462 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T04:04:20.463Z,1542254660.463 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:04:20.463Z,1542254660.463 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:04:52.124Z,1542254692.124 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,15929.77
2018-11-15T04:05:26.124Z,1542254726.124 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T04:00:23.9Z
2018-11-15T04:05:26.124Z,1542254726.124 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T04:05:26.125Z,1542254726.125 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T04:05:31.080Z,1542254731.080 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0079.lzma
2018-11-15T04:05:31.858Z,1542254731.858 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0079.lzma.bak
2018-11-15T04:05:31.859Z,1542254731.859 [DataOverHttps](INFO): SBD MOMSN=8878215
2018-11-15T04:05:40.904Z,1542254740.904 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181114T233847/Express0080.lzma
2018-11-15T04:05:41.690Z,1542254741.690 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0080.lzma.bak
2018-11-15T04:05:41.690Z,1542254741.690 [DataOverHttps](INFO): SBD MOMSN=8878217
2018-11-15T04:05:42.517Z,1542254742.517 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-11-15T04:05:42.528Z,1542254742.528 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T04:05:42.528Z,1542254742.528 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T04:05:42.549Z,1542254742.549 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T04:07:20.479Z,1542254840.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:07:20.479Z,1542254840.479 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2018-11-15T04:07:20.479Z,1542254840.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T04:07:20.493Z,1542254840.493 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:07:20.493Z,1542254840.493 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2018-11-15T04:07:20.493Z,1542254840.493 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T04:07:20.530Z,1542254840.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:07:20.531Z,1542254840.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:07:20.901Z,1542254840.901 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T04:07:20.901Z,1542254840.901 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2018-11-15T04:07:20.902Z,1542254840.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T04:07:20.902Z,1542254840.902 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2018-11-15T04:07:21.255Z,1542254841.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T04:07:21.256Z,1542254841.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:07:21.256Z,1542254841.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:07:21.256Z,1542254841.256 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T04:07:21.257Z,1542254841.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:07:21.257Z,1542254841.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:09:13.447Z,1542254953.447 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-11-15T04:09:13.447Z,1542254953.447 [DropWeight] Hardware Fault, FailCount= 1
2018-11-15T04:09:13.447Z,1542254953.447 [DropWeight](ERROR): Hardware Fault
2018-11-15T04:09:13.515Z,1542254953.515 [CBIT](INFO): Critical error at 20181115T040913
2018-11-15T04:09:13.521Z,1542254953.521 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-11-15T04:09:13.522Z,1542254953.522 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-11-15T04:09:13.928Z,1542254953.928 [CBIT](INFO): Critical error at 20181115T040913
2018-11-15T04:10:21.278Z,1542255021.278 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:10:21.278Z,1542255021.279 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2018-11-15T04:10:21.279Z,1542255021.279 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T04:10:21.280Z,1542255021.280 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:10:21.285Z,1542255021.285 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2018-11-15T04:10:21.285Z,1542255021.285 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T04:10:21.310Z,1542255021.310 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:10:21.310Z,1542255021.310 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:10:21.701Z,1542255021.701 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T04:10:21.701Z,1542255021.701 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2018-11-15T04:10:21.702Z,1542255021.702 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T04:10:21.702Z,1542255021.702 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2018-11-15T04:10:22.090Z,1542255022.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T04:10:22.090Z,1542255022.090 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:10:22.091Z,1542255022.091 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:10:22.091Z,1542255022.091 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T04:10:22.092Z,1542255022.092 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:10:22.092Z,1542255022.092 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:10:42.696Z,1542255042.696 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T04:10:42.696Z,1542255042.696 [Default:CheckIn:C.Wait] Stopped
2018-11-15T04:10:42.696Z,1542255042.696 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T04:10:42.696Z,1542255042.696 [Default:CheckIn:D] Running Loop=1
2018-11-15T04:10:43.075Z,1542255043.075 [Default:CheckIn:D] Stopped
2018-11-15T04:10:43.076Z,1542255043.076 [Default:CheckIn:E] Running Loop=1
2018-11-15T04:10:43.466Z,1542255043.466 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 268.739128 min 
2018-11-15T04:10:43.467Z,1542255043.467 [Default:CheckIn:E] Stopped
2018-11-15T04:10:43.467Z,1542255043.467 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T04:10:43.467Z,1542255043.467 [Default:CheckIn] Stopped
2018-11-15T04:10:43.467Z,1542255043.467 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T04:10:43.467Z,1542255043.467 [Default:CheckIn](INFO): Running loop #27
2018-11-15T04:10:43.467Z,1542255043.467 [Default:CheckIn] Running Loop=27
2018-11-15T04:10:43.467Z,1542255043.467 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T04:10:43.468Z,1542255043.468 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T04:13:17.466Z,1542255197.466 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T04:13:17.466Z,1542255197.466 [NAL9602] Data Fault, FailCount= 5
2018-11-15T04:13:17.466Z,1542255197.466 [NAL9602](ERROR): Data Fault
2018-11-15T04:13:17.526Z,1542255197.526 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T04:13:17.527Z,1542255197.527 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-11-15T04:13:17.878Z,1542255197.878 [NAL9602](INFO): Powering down
2018-11-15T04:13:17.933Z,1542255197.933 [CBIT](INFO): Critical error at 20181115T041317
2018-11-15T04:13:25.103Z,1542255205.103 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:13:25.103Z,1542255205.103 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2018-11-15T04:13:25.103Z,1542255205.103 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T04:13:25.105Z,1542255205.105 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:13:25.105Z,1542255205.105 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2018-11-15T04:13:25.105Z,1542255205.105 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T04:13:25.142Z,1542255205.142 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:13:25.142Z,1542255205.142 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:13:25.246Z,1542255205.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T04:13:25.246Z,1542255205.246 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2018-11-15T04:13:25.246Z,1542255205.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T04:13:25.246Z,1542255205.246 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2018-11-15T04:13:25.603Z,1542255205.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T04:13:25.604Z,1542255205.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:13:25.604Z,1542255205.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:13:25.604Z,1542255205.604 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T04:13:25.605Z,1542255205.605 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:13:25.605Z,1542255205.605 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:13:53.194Z,1542255233.194 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-11-15T04:13:53.194Z,1542255233.194 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768V
2018-11-15T04:15:17.584Z,1542255317.584 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T04:15:17.584Z,1542255317.584 [NAL9602] No Fault, FailCount= 5
2018-11-15T04:15:17.910Z,1542255317.910 [NAL9602](INFO): Powering up NAL9602
2018-11-15T04:15:28.710Z,1542255328.710 [NAL9602](INFO): NAL9602 initialized
2018-11-15T04:15:46.432Z,1542255346.432 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T04:10:43.5Z
2018-11-15T04:15:46.432Z,1542255346.432 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T04:15:46.432Z,1542255346.432 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T04:15:51.403Z,1542255351.403 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20181114T233847/Courier0082.lzma
2018-11-15T04:15:52.183Z,1542255352.183 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0082.lzma.bak
2018-11-15T04:15:52.183Z,1542255352.183 [DataOverHttps](INFO): SBD MOMSN=8878280
2018-11-15T04:16:01.374Z,1542255361.374 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181114T233847/Express0083.lzma
2018-11-15T04:16:02.151Z,1542255362.151 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0083.lzma.bak
2018-11-15T04:16:02.151Z,1542255362.151 [DataOverHttps](INFO): SBD MOMSN=8878285
2018-11-15T04:16:03.007Z,1542255363.007 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T04:16:03.007Z,1542255363.007 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T04:16:03.007Z,1542255363.007 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T04:16:14.760Z,1542255374.760 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-11-15T04:16:25.974Z,1542255385.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:16:25.974Z,1542255385.974 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2018-11-15T04:16:25.974Z,1542255385.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T04:16:25.976Z,1542255385.976 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:16:25.976Z,1542255385.976 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2018-11-15T04:16:25.976Z,1542255385.976 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T04:16:26.006Z,1542255386.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:16:26.006Z,1542255386.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:16:26.385Z,1542255386.385 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T04:16:26.385Z,1542255386.385 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2018-11-15T04:16:26.386Z,1542255386.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T04:16:26.386Z,1542255386.386 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2018-11-15T04:16:26.765Z,1542255386.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T04:16:26.766Z,1542255386.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:16:26.766Z,1542255386.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:16:26.767Z,1542255386.767 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T04:16:26.767Z,1542255386.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:16:26.767Z,1542255386.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:19:08.402Z,1542255548.402 [RDI_Pathfinder](ERROR): Failed to parse:
    +0.00,        +0.00,        +0.00,   0.00,16785.54
2018-11-15T04:19:26.790Z,1542255566.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:19:26.790Z,1542255566.790 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2018-11-15T04:19:26.790Z,1542255566.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T04:19:26.792Z,1542255566.792 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:19:26.792Z,1542255566.792 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2018-11-15T04:19:26.792Z,1542255566.792 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T04:19:26.804Z,1542255566.804 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:19:26.805Z,1542255566.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:19:27.216Z,1542255567.216 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T04:19:27.216Z,1542255567.216 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2018-11-15T04:19:27.221Z,1542255567.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T04:19:27.221Z,1542255567.221 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2018-11-15T04:19:27.589Z,1542255567.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T04:19:27.589Z,1542255567.589 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:19:27.590Z,1542255567.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:19:27.590Z,1542255567.590 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T04:19:27.591Z,1542255567.591 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:19:27.591Z,1542255567.591 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:21:03.343Z,1542255663.343 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T04:21:03.343Z,1542255663.343 [Default:CheckIn:C.Wait] Stopped
2018-11-15T04:21:03.343Z,1542255663.343 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T04:21:03.343Z,1542255663.343 [Default:CheckIn:D] Running Loop=1
2018-11-15T04:21:03.744Z,1542255663.744 [Default:CheckIn:D] Stopped
2018-11-15T04:21:03.744Z,1542255663.744 [Default:CheckIn:E] Running Loop=1
2018-11-15T04:21:04.162Z,1542255664.162 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 279.083594 min 
2018-11-15T04:21:04.162Z,1542255664.162 [Default:CheckIn:E] Stopped
2018-11-15T04:21:04.162Z,1542255664.162 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T04:21:04.162Z,1542255664.162 [Default:CheckIn] Stopped
2018-11-15T04:21:04.162Z,1542255664.162 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T04:21:04.163Z,1542255664.163 [Default:CheckIn](INFO): Running loop #28
2018-11-15T04:21:04.163Z,1542255664.163 [Default:CheckIn] Running Loop=28
2018-11-15T04:21:04.163Z,1542255664.163 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T04:21:04.163Z,1542255664.163 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T04:22:27.927Z,1542255747.927 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:22:27.928Z,1542255747.928 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2018-11-15T04:22:27.928Z,1542255747.928 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T04:22:27.932Z,1542255747.932 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:22:27.932Z,1542255747.932 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2018-11-15T04:22:27.932Z,1542255747.932 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T04:22:27.957Z,1542255747.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:22:27.958Z,1542255747.958 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:22:28.359Z,1542255748.359 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T04:22:28.359Z,1542255748.359 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2018-11-15T04:22:28.360Z,1542255748.360 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T04:22:28.360Z,1542255748.360 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2018-11-15T04:22:28.721Z,1542255748.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T04:22:28.722Z,1542255748.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:22:28.722Z,1542255748.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:22:28.722Z,1542255748.722 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T04:22:28.723Z,1542255748.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:22:28.723Z,1542255748.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:23:21.231Z,1542255801.231 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-11-15T04:23:21.232Z,1542255801.232 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,
2018-11-15T04:24:13.753Z,1542255853.753 [CBIT](INFO): Clearing failed state for component DropWeight
2018-11-15T04:24:13.753Z,1542255853.753 [DropWeight] No Fault, FailCount= 1
2018-11-15T04:25:31.164Z,1542255931.164 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T04:25:31.164Z,1542255931.164 [NAL9602] Data Fault, FailCount= 1
2018-11-15T04:25:31.164Z,1542255931.164 [NAL9602](ERROR): Data Fault
2018-11-15T04:25:31.235Z,1542255931.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:25:31.235Z,1542255931.235 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2018-11-15T04:25:31.235Z,1542255931.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T04:25:31.237Z,1542255931.237 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:25:31.237Z,1542255931.237 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2018-11-15T04:25:31.237Z,1542255931.237 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T04:25:31.262Z,1542255931.262 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:25:31.262Z,1542255931.262 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:25:31.262Z,1542255931.262 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T04:25:31.318Z,1542255931.318 [NAL9602](INFO): Powering down
2018-11-15T04:25:31.382Z,1542255931.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T04:25:31.382Z,1542255931.382 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2018-11-15T04:25:31.382Z,1542255931.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T04:25:31.382Z,1542255931.382 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2018-11-15T04:25:31.709Z,1542255931.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T04:25:31.710Z,1542255931.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:25:31.710Z,1542255931.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:25:31.710Z,1542255931.710 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T04:25:31.711Z,1542255931.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:25:31.711Z,1542255931.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:25:32.146Z,1542255932.146 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T04:25:32.146Z,1542255932.146 [NAL9602] No Fault, FailCount= 1
2018-11-15T04:26:01.682Z,1542255961.682 [NAL9602](INFO): Powering up NAL9602
2018-11-15T04:26:06.567Z,1542255966.567 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T04:21:04.2Z
2018-11-15T04:26:06.568Z,1542255966.568 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T04:26:06.568Z,1542255966.568 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T04:26:11.516Z,1542255971.516 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181114T233847/Courier0085.lzma
2018-11-15T04:26:12.298Z,1542255972.298 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0085.lzma.bak
2018-11-15T04:26:12.299Z,1542255972.299 [DataOverHttps](INFO): SBD MOMSN=8878353
2018-11-15T04:26:13.091Z,1542255973.091 [NAL9602](INFO): NAL9602 initialized
2018-11-15T04:26:21.350Z,1542255981.350 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181114T233847/Express0086.lzma
2018-11-15T04:26:22.115Z,1542255982.115 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0086.lzma.bak
2018-11-15T04:26:22.115Z,1542255982.115 [DataOverHttps](INFO): SBD MOMSN=8878355
2018-11-15T04:26:22.956Z,1542255982.956 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T04:26:22.956Z,1542255982.956 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T04:26:22.956Z,1542255982.956 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T04:28:31.895Z,1542256111.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:28:31.895Z,1542256111.895 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2018-11-15T04:28:31.895Z,1542256111.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T04:28:31.899Z,1542256111.899 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:28:31.900Z,1542256111.900 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2018-11-15T04:28:31.900Z,1542256111.900 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T04:28:31.925Z,1542256111.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:28:31.925Z,1542256111.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:28:32.302Z,1542256112.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T04:28:32.302Z,1542256112.302 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2018-11-15T04:28:32.302Z,1542256112.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T04:28:32.302Z,1542256112.302 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2018-11-15T04:28:32.686Z,1542256112.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T04:28:32.687Z,1542256112.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:28:32.687Z,1542256112.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:28:32.687Z,1542256112.687 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T04:28:32.688Z,1542256112.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:28:32.688Z,1542256112.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:31:23.444Z,1542256283.444 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T04:31:23.444Z,1542256283.444 [Default:CheckIn:C.Wait] Stopped
2018-11-15T04:31:23.444Z,1542256283.444 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T04:31:23.444Z,1542256283.444 [Default:CheckIn:D] Running Loop=1
2018-11-15T04:31:23.852Z,1542256283.852 [Default:CheckIn:D] Stopped
2018-11-15T04:31:23.852Z,1542256283.852 [Default:CheckIn:E] Running Loop=1
2018-11-15T04:31:24.240Z,1542256284.240 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 289.418750 min 
2018-11-15T04:31:24.241Z,1542256284.241 [Default:CheckIn:E] Stopped
2018-11-15T04:31:24.241Z,1542256284.241 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T04:31:24.241Z,1542256284.241 [Default:CheckIn] Stopped
2018-11-15T04:31:24.241Z,1542256284.241 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T04:31:24.241Z,1542256284.241 [Default:CheckIn](INFO): Running loop #29
2018-11-15T04:31:24.241Z,1542256284.241 [Default:CheckIn] Running Loop=29
2018-11-15T04:31:24.242Z,1542256284.242 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T04:31:24.242Z,1542256284.242 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T04:31:33.065Z,1542256293.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:31:33.065Z,1542256293.065 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2018-11-15T04:31:33.065Z,1542256293.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T04:31:33.067Z,1542256293.067 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:31:33.067Z,1542256293.067 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2018-11-15T04:31:33.067Z,1542256293.067 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T04:31:33.088Z,1542256293.088 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:31:33.088Z,1542256293.088 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:31:33.088Z,1542256293.088 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:31:33.093Z,1542256293.093 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:36:16.914Z,1542256576.914 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T04:36:16.915Z,1542256576.915 [NAL9602] Data Fault, FailCount= 2
2018-11-15T04:36:16.915Z,1542256576.915 [NAL9602](ERROR): Data Fault
2018-11-15T04:36:16.984Z,1542256576.984 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T04:36:17.306Z,1542256577.306 [NAL9602](INFO): Powering down
2018-11-15T04:36:18.185Z,1542256578.185 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T04:36:18.185Z,1542256578.185 [NAL9602] No Fault, FailCount= 2
2018-11-15T04:36:26.534Z,1542256586.534 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T04:31:24.2Z
2018-11-15T04:36:26.534Z,1542256586.534 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T04:36:26.534Z,1542256586.534 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T04:36:31.434Z,1542256591.434 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0088.lzma
2018-11-15T04:36:32.210Z,1542256592.210 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0088.lzma.bak
2018-11-15T04:36:32.210Z,1542256592.210 [DataOverHttps](INFO): SBD MOMSN=8878428
2018-11-15T04:36:41.242Z,1542256601.242 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20181114T233847/Express0089.lzma
2018-11-15T04:36:42.006Z,1542256602.006 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0089.lzma.bak
2018-11-15T04:36:42.007Z,1542256602.007 [DataOverHttps](INFO): SBD MOMSN=8878430
2018-11-15T04:36:42.847Z,1542256602.847 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T04:36:42.847Z,1542256602.847 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T04:36:42.847Z,1542256602.847 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T04:36:47.387Z,1542256607.387 [NAL9602](INFO): Powering up NAL9602
2018-11-15T04:36:58.187Z,1542256618.187 [NAL9602](INFO): NAL9602 initialized
2018-11-15T04:41:43.315Z,1542256903.315 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T04:41:43.315Z,1542256903.315 [Default:CheckIn:C.Wait] Stopped
2018-11-15T04:41:43.315Z,1542256903.315 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T04:41:43.315Z,1542256903.315 [Default:CheckIn:D] Running Loop=1
2018-11-15T04:41:43.686Z,1542256903.686 [Default:CheckIn:D] Stopped
2018-11-15T04:41:43.686Z,1542256903.686 [Default:CheckIn:E] Running Loop=1
2018-11-15T04:41:44.091Z,1542256904.091 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 299.749316 min 
2018-11-15T04:41:44.092Z,1542256904.092 [Default:CheckIn:E] Stopped
2018-11-15T04:41:44.092Z,1542256904.092 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T04:41:44.092Z,1542256904.092 [Default:CheckIn] Stopped
2018-11-15T04:41:44.092Z,1542256904.092 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T04:41:44.092Z,1542256904.092 [Default:CheckIn](INFO): Running loop #30
2018-11-15T04:41:44.092Z,1542256904.092 [Default:CheckIn] Running Loop=30
2018-11-15T04:41:44.092Z,1542256904.092 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T04:41:44.093Z,1542256904.093 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T04:46:33.096Z,1542257193.096 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T04:46:33.096Z,1542257193.096 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2018-11-15T04:46:33.097Z,1542257193.097 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T04:46:33.098Z,1542257193.098 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2018-11-15T04:46:33.485Z,1542257193.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T04:46:33.486Z,1542257193.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:46:33.486Z,1542257193.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:46:33.486Z,1542257193.486 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T04:46:33.487Z,1542257193.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:46:33.487Z,1542257193.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:46:46.282Z,1542257206.282 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-11-15T04:41:44.1Z
2018-11-15T04:46:46.282Z,1542257206.282 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T04:46:46.282Z,1542257206.282 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-11-15T04:46:51.198Z,1542257211.198 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181114T233847/Courier0091.lzma
2018-11-15T04:46:51.976Z,1542257211.976 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Courier0091.lzma.bak
2018-11-15T04:46:51.976Z,1542257211.976 [DataOverHttps](INFO): SBD MOMSN=8878499
2018-11-15T04:47:01.025Z,1542257221.025 [DataOverHttps](INFO): Sending 97 bytes from file Logs/20181114T233847/Express0092.lzma
2018-11-15T04:47:01.067Z,1542257221.067 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-11-15T04:47:01.067Z,1542257221.067 [NAL9602] Data Fault, FailCount= 3
2018-11-15T04:47:01.067Z,1542257221.067 [NAL9602](ERROR): Data Fault
2018-11-15T04:47:01.134Z,1542257221.134 [CBIT](ERROR): Data Fault in component: NAL9602
2018-11-15T04:47:01.406Z,1542257221.406 [NAL9602](INFO): Powering down
2018-11-15T04:47:01.798Z,1542257221.798 [DataOverHttps](INFO): Moved sent file to Logs/20181114T233847/Express0092.lzma.bak
2018-11-15T04:47:01.798Z,1542257221.798 [DataOverHttps](INFO): SBD MOMSN=8878501
2018-11-15T04:47:02.599Z,1542257222.599 [Default:CheckIn:Read_Iridium] Stopped
2018-11-15T04:47:02.599Z,1542257222.599 [Default:CheckIn:C.Wait] Running Loop=1
2018-11-15T04:47:02.599Z,1542257222.599 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-11-15T04:47:02.610Z,1542257222.610 [CBIT](INFO): Clearing failed state for component NAL9602
2018-11-15T04:47:02.610Z,1542257222.610 [NAL9602] No Fault, FailCount= 3
2018-11-15T04:47:31.810Z,1542257251.810 [NAL9602](INFO): Powering up NAL9602
2018-11-15T04:47:42.686Z,1542257262.686 [NAL9602](INFO): NAL9602 initialized
2018-11-15T04:49:33.823Z,1542257373.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:49:33.823Z,1542257373.823 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-11-15T04:49:33.823Z,1542257373.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T04:49:33.825Z,1542257373.825 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:49:33.825Z,1542257373.825 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-11-15T04:49:33.825Z,1542257373.825 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T04:49:33.838Z,1542257373.838 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:49:33.838Z,1542257373.838 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:49:34.221Z,1542257374.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T04:49:34.221Z,1542257374.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-11-15T04:49:34.222Z,1542257374.222 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T04:49:34.222Z,1542257374.222 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-11-15T04:49:34.602Z,1542257374.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T04:49:34.603Z,1542257374.603 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:49:34.603Z,1542257374.603 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:49:34.603Z,1542257374.603 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T04:49:34.604Z,1542257374.604 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:49:34.604Z,1542257374.604 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:51:34.038Z,1542257494.038 [CommandLine](IMPORTANT): got command failComponent
2018-11-15T04:51:34.038Z,1542257494.038 [CommandLine](IMPORTANT): Failed components:
2018-11-15T04:51:34.038Z,1542257494.038 [CommandLine](IMPORTANT): No failed Components.
2018-11-15T04:52:02.911Z,1542257522.911 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-11-15T04:52:02.911Z,1542257522.911 [Default:CheckIn:C.Wait] Stopped
2018-11-15T04:52:02.911Z,1542257522.911 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-11-15T04:52:02.912Z,1542257522.912 [Default:CheckIn:D] Running Loop=1
2018-11-15T04:52:03.289Z,1542257523.289 [Default:CheckIn:D] Stopped
2018-11-15T04:52:03.289Z,1542257523.289 [Default:CheckIn:E] Running Loop=1
2018-11-15T04:52:03.691Z,1542257523.691 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 310.076009 min 
2018-11-15T04:52:03.691Z,1542257523.691 [Default:CheckIn:E] Stopped
2018-11-15T04:52:03.691Z,1542257523.691 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-11-15T04:52:03.692Z,1542257523.692 [Default:CheckIn] Stopped
2018-11-15T04:52:03.692Z,1542257523.692 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T04:52:03.692Z,1542257523.692 [Default:CheckIn](INFO): Running loop #31
2018-11-15T04:52:03.692Z,1542257523.692 [Default:CheckIn] Running Loop=31
2018-11-15T04:52:03.692Z,1542257523.692 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-11-15T04:52:03.692Z,1542257523.692 [Default:CheckIn:Read_GPS] Running Loop=1
2018-11-15T04:52:15.610Z,1542257535.610 [CommandLine](IMPORTANT): got command show variable supervisor
2018-11-15T04:52:33.399Z,1542257553.399 [CommandLine](IMPORTANT): got command show variable contrtol
2018-11-15T04:52:34.986Z,1542257554.986 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:52:34.986Z,1542257554.986 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-11-15T04:52:34.986Z,1542257554.986 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-11-15T04:52:34.988Z,1542257554.988 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-11-15T04:52:34.988Z,1542257554.988 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-11-15T04:52:34.988Z,1542257554.988 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-11-15T04:52:35.017Z,1542257555.017 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-11-15T04:52:35.017Z,1542257555.017 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-11-15T04:52:35.406Z,1542257555.406 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-11-15T04:52:35.406Z,1542257555.406 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-11-15T04:52:35.407Z,1542257555.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-11-15T04:52:35.407Z,1542257555.407 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-11-15T04:52:35.799Z,1542257555.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-11-15T04:52:35.799Z,1542257555.799 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:52:35.799Z,1542257555.799 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:52:35.800Z,1542257555.800 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-11-15T04:52:35.800Z,1542257555.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-11-15T04:52:35.805Z,1542257555.805 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-11-15T04:52:47.655Z,1542257567.655 [CommandLine](IMPORTANT): got command show variable control
2018-11-15T04:52:47.671Z,1542257567.671 [CommandLine](IMPORTANT): DAT.powerLoadControl (none)
2018-11-15T04:52:47.692Z,1542257567.692 [CommandLine](IMPORTANT): HorizontalControl.loadAtStartup (bool)
2018-11-15T04:52:47.693Z,1542257567.693 [CommandLine](IMPORTANT): HorizontalControl.kdHeading (second)
2018-11-15T04:52:47.693Z,1542257567.693 [CommandLine](IMPORTANT): HorizontalControl.kiHeading (reciprocal_second)
2018-11-15T04:52:47.694Z,1542257567.694 [CommandLine](IMPORTANT): HorizontalControl.kiwpHeading (radian_per_second_per_meter)
2018-11-15T04:52:47.694Z,1542257567.694 [CommandLine](IMPORTANT): HorizontalControl.kpHeading (none)
2018-11-15T04:52:47.694Z,1542257567.694 [CommandLine](IMPORTANT): HorizontalControl.kwpHeading (radian_per_meter)
2018-11-15T04:52:47.695Z,1542257567.695 [CommandLine](IMPORTANT): HorizontalControl.maxHdgAccel (angular_degree_per_second_squared)
2018-11-15T04:52:47.695Z,1542257567.695 [CommandLine](IMPORTANT): HorizontalControl.maxHdgInt (radian)
2018-11-15T04:52:47.695Z,1542257567.695 [CommandLine](IMPORTANT): HorizontalControl.maxHdgRate (angular_degree_per_second)
2018-11-15T04:52:47.696Z,1542257567.696 [CommandLine](IMPORTANT): HorizontalControl.maxKxte (angular_degree)
2018-11-15T04:52:47.696Z,1542257567.696 [CommandLine](IMPORTANT): HorizontalControl.rudDeadband (angular_degree)
2018-11-15T04:52:47.697Z,1542257567.697 [CommandLine](IMPORTANT): HorizontalControl.rudLimit (angular_degree)
2018-11-15T04:52:47.697Z,1542257567.697 [CommandLine](IMPORTANT): LoopControl.loadAtStartup (bool)
2018-11-15T04:52:47.698Z,1542257567.698 [CommandLine](IMPORTANT): LoopControl.nominalDt (second)
2018-11-15T04:52:47.698Z,1542257567.698 [CommandLine](IMPORTANT): SpeedControl.loadAtStartup (bool)
2018-11-15T04:52:47.698Z,1542257567.698 [CommandLine](IMPORTANT): SpeedControl.propPitch (meter_per_radian)
2018-11-15T04:52:47.699Z,1542257567.699 [CommandLine](IMPORTANT): VerticalControl.loadAtStartup (bool)
2018-11-15T04:52:47.699Z,1542257567.699 [CommandLine](IMPORTANT): VerticalControl.buoyancyDefault (cubic_centimeter)
2018-11-15T04:52:47.700Z,1542257567.700 [CommandLine](IMPORTANT): VerticalControl.buoyancyLimitHiCC (cubic_centimeter)
2018-11-15T04:52:47.700Z,1542257567.700 [CommandLine](IMPORTANT): VerticalControl.buoyancyLimitLoCC (cubic_centimeter)
2018-11-15T04:52:47.700Z,1542257567.700 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral (cubic_centimeter)
2018-11-15T04:52:47.701Z,1542257567.701 [CommandLine](IMPORTANT): VerticalControl.buoyancyPumpDepth (meter)
2018-11-15T04:52:47.701Z,1542257567.701 [CommandLine](IMPORTANT): VerticalControl.depthDeadband (meter)
2018-11-15T04:52:47.702Z,1542257567.702 [CommandLine](IMPORTANT): VerticalControl.depthRateDeadband (meter_per_second)
2018-11-15T04:52:47.702Z,1542257567.702 [CommandLine](IMPORTANT): VerticalControl.depthRateSamples (count)
2018-11-15T04:52:47.703Z,1542257567.703 [CommandLine](IMPORTANT): VerticalControl.dropWtDepthExcursion (meter)
2018-11-15T04:52:47.703Z,1542257567.703 [CommandLine](IMPORTANT): VerticalControl.dropWtOverrideDelay (minute)
2018-11-15T04:52:47.703Z,1542257567.703 [CommandLine](IMPORTANT): VerticalControl.elevDeadband (angular_degree)
2018-11-15T04:52:47.704Z,1542257567.704 [CommandLine](IMPORTANT): VerticalControl.elevLimit (angular_degree)
2018-11-15T04:52:47.704Z,1542257567.704 [CommandLine](IMPORTANT): VerticalControl.elevTurnTime (second)
2018-11-15T04:52:47.705Z,1542257567.705 [CommandLine](IMPORTANT): VerticalControl.excursionDepthTimeout (second)
2018-11-15T04:52:47.705Z,1542257567.705 [CommandLine](IMPORTANT): VerticalControl.kdDepth (radian_second_per_meter)
2018-11-15T04:52:47.705Z,1542257567.705 [CommandLine](IMPORTANT): VerticalControl.kdDepthBuoy (second)
2018-11-15T04:52:47.706Z,1542257567.706 [CommandLine](IMPORTANT): VerticalControl.kdDepthRateBuoy (second)
2018-11-15T04:52:47.706Z,1542257567.706 [CommandLine](IMPORTANT): VerticalControl.kdPitchElevator (second)
2018-11-15T04:52:47.707Z,1542257567.707 [CommandLine](IMPORTANT): VerticalControl.kdPitchMass (second)
2018-11-15T04:52:47.707Z,1542257567.707 [CommandLine](IMPORTANT): VerticalControl.kiDepth (radian_per_second_per_meter)
2018-11-15T04:52:47.707Z,1542257567.707 [CommandLine](IMPORTANT): VerticalControl.kiDepthBuoy (reciprocal_second)
2018-11-15T04:52:47.708Z,1542257567.708 [CommandLine](IMPORTANT): VerticalControl.kiDepthOff (meter_per_second)
2018-11-15T04:52:47.708Z,1542257567.708 [CommandLine](IMPORTANT): VerticalControl.kiDepthRateBuoy (reciprocal_second)
2018-11-15T04:52:47.709Z,1542257567.709 [CommandLine](IMPORTANT): VerticalControl.kiPitchElevator (reciprocal_second)
2018-11-15T04:52:47.709Z,1542257567.709 [CommandLine](IMPORTANT): VerticalControl.kiPitchMass (reciprocal_second)
2018-11-15T04:52:47.710Z,1542257567.710 [CommandLine](IMPORTANT): VerticalControl.kpDepth (radian_per_meter)
2018-11-15T04:52:47.710Z,1542257567.710 [CommandLine](IMPORTANT): VerticalControl.kpDepthBuoy (ratio)
2018-11-15T04:52:47.710Z,1542257567.710 [CommandLine](IMPORTANT): VerticalControl.kpDepthRateBuoy (ratio)
2018-11-15T04:52:47.711Z,1542257567.711 [CommandLine](IMPORTANT): VerticalControl.kpPitchElevator (none)
2018-11-15T04:52:47.711Z,1542257567.711 [CommandLine](IMPORTANT): VerticalControl.kpPitchMass (none)
2018-11-15T04:52:47.712Z,1542257567.712 [CommandLine](IMPORTANT): VerticalControl.limitDepthTrajectory (bool)
2018-11-15T04:52:47.712Z,1542257567.712 [CommandLine](IMPORTANT): VerticalControl.massBackOnGoToSurface (bool)
2018-11-15T04:52:47.713Z,1542257567.713 [CommandLine](IMPORTANT): VerticalControl.massDeadband (millimeter)
2018-11-15T04:52:47.713Z,1542257567.713 [CommandLine](IMPORTANT): VerticalControl.massDefault (centimeter)
2018-11-15T04:52:47.713Z,1542257567.713 [CommandLine](IMPORTANT): VerticalControl.massFilterLimit (degree)
2018-11-15T04:52:47.714Z,1542257567.714 [CommandLine](IMPORTANT): VerticalControl.massFilterWidth (second)
2018-11-15T04:52:47.715Z,1542257567.715 [CommandLine](IMPORTANT): VerticalControl.massPositionLimitAft (millimeter)
2018-11-15T04:52:47.715Z,1542257567.715 [CommandLine](IMPORTANT): VerticalControl.massPositionLimitFwd (millimeter)
2018-11-15T04:52:47.716Z,1542257567.716 [CommandLine](IMPORTANT): VerticalControl.massTurnTime (second)
2018-11-15T04:52:47.716Z,1542257567.716 [CommandLine](IMPORTANT): VerticalControl.maxBuoyDiveAccel (meter_per_second_squared)
2018-11-15T04:52:47.716Z,1542257567.716 [CommandLine](IMPORTANT): VerticalControl.maxBuoyDiveRate (meter_per_second)
2018-11-15T04:52:47.717Z,1542257567.717 [CommandLine](IMPORTANT): VerticalControl.maxBuoyInt (cubic_centimeter)
2018-11-15T04:52:47.718Z,1542257567.718 [CommandLine](IMPORTANT): VerticalControl.maxDepthInt (angular_degree)
2018-11-15T04:52:47.718Z,1542257567.718 [CommandLine](IMPORTANT): VerticalControl.maxDiveAccel (meter_per_second_squared)
2018-11-15T04:52:47.719Z,1542257567.719 [CommandLine](IMPORTANT): VerticalControl.maxDiveRate (meter_per_second)
2018-11-15T04:52:47.719Z,1542257567.719 [CommandLine](IMPORTANT): VerticalControl.maxPitchElevatorInt (angular_degree)
2018-11-15T04:52:47.719Z,1542257567.719 [CommandLine](IMPORTANT): VerticalControl.maxPitchMassInt (millimeter)
2018-11-15T04:52:47.720Z,1542257567.720 [CommandLine](IMPORTANT): VerticalControl.maxPitchRate (angular_degree_per_second)
2018-11-15T04:52:47.721Z,1542257567.721 [CommandLine](IMPORTANT): VerticalControl.minAscendPitch (angular_degree)
2018-11-15T04:52:47.721Z,1542257567.721 [CommandLine](IMPORTANT): VerticalControl.minDepthExcursion (meter)
2018-11-15T04:52:47.722Z,1542257567.722 [CommandLine](IMPORTANT): VerticalControl.pitchLimit (angular_degree)
2018-11-15T04:52:47.722Z,1542257567.722 [CommandLine](IMPORTANT): VerticalControl.pitchTimeoutGoToSurface (second)
2018-11-15T04:52:47.723Z,1542257567.723 [CommandLine](IMPORTANT): VerticalControl.stopDepthExcursion (meter)
2018-11-15T04:52:47.723Z,1542257567.723 [CommandLine](IMPORTANT): VerticalControl.stopOverrideDelay (minute)
2018-11-15T04:52:47.724Z,1542257567.724 [CommandLine](IMPORTANT): VerticalControl.stopOverrideDelayBuoy (minute)
2018-11-15T04:52:47.724Z,1542257567.724 [CommandLine](IMPORTANT): VerticalControl.surfaceThreshold (meter)
2018-11-15T04:52:47.754Z,1542257567.754 [CommandLine](IMPORTANT): VerticalControl.useElevIntInDepthMode (bool)
2018-11-15T04:52:47.758Z,1542257567.758 [CommandLine](IMPORTANT): AHRS_3DMGX3.loadControl (none)
2018-11-15T04:52:47.758Z,1542257567.758 [CommandLine](IMPORTANT): AHRS_sp3003D.loadControl (none)
2018-11-15T04:52:47.759Z,1542257567.759 [CommandLine](IMPORTANT): AHRS_M2.loadControl (none)
2018-11-15T04:52:47.759Z,1542257567.759 [CommandLine](IMPORTANT): Aanderaa_O2.loadControl (none)
2018-11-15T04:52:47.759Z,1542257567.759 [CommandLine](IMPORTANT): AcousticModem_Benthos_ATM900.loadControl (none)
2018-11-15T04:52:47.779Z,1542257567.779 [CommandLine](IMPORTANT): BuoyancyServo.loadControl (none)
2018-11-15T04:52:47.793Z,1542257567.793 [CommandLine](IMPORTANT): CANONSampler.loadControl (none)
2018-11-15T04:52:47.795Z,1542257567.795 [CommandLine](IMPORTANT): CTD_NeilBrown.loadControl (none)
2018-11-15T04:52:47.795Z,1542257567.795 [CommandLine](IMPORTANT): CTD_Seabird.loadControl (none)
2018-11-15T04:52:47.796Z,1542257567.796 [CommandLine](IMPORTANT): DAT.loadControl (none)
2018-11-15T04:52:47.796Z,1542257567.796 [CommandLine](IMPORTANT): Depth_Keller.loadControl (none)
2018-11-15T04:52:47.805Z,1542257567.805 [CommandLine](IMPORTANT): DVL_micro.loadControl (none)
2018-11-15T04:52:47.806Z,1542257567.806 [CommandLine](IMPORTANT): ElevatorServo.loadControl (none)
2018-11-15T04:52:47.806Z,1542257567.806 [CommandLine](IMPORTANT): ESPComponent.loadControl (none)
2018-11-15T04:52:47.807Z,1542257567.807 [CommandLine](IMPORTANT): ESPComponent.secLoadControl (none)
2018-11-15T04:52:47.807Z,1542257567.807 [CommandLine](IMPORTANT): ISUS.loadControl (none)
2018-11-15T04:52:47.808Z,1542257567.808 [CommandLine](IMPORTANT): MassServo.loadControl (none)
2018-11-15T04:52:47.808Z,1542257567.808 [CommandLine](IMPORTANT): NAL9602.loadControl (none)
2018-11-15T04:52:47.817Z,1542257567.817 [CommandLine](IMPORTANT): PAR_Licor.loadControl (none)
2018-11-15T04:52:47.818Z,1542257567.818 [CommandLine](IMPORTANT): PNI_TCM.loadControl (none)
2018-11-15T04:52:47.818Z,1542257567.818 [CommandLine](IMPORTANT): Radio_Surface.loadControl (none)
2018-11-15T04:52:47.819Z,1542257567.819 [CommandLine](IMPORTANT): RDI_Pathfinder.loadControl (none)
2018-11-15T04:52:47.819Z,1542257567.819 [CommandLine](IMPORTANT): rhodamine.loadControl (none)
2018-11-15T04:52:47.819Z,1542257567.819 [CommandLine](IMPORTANT): Rowe_600.loadControl (none)
2018-11-15T04:52:47.820Z,1542257567.820 [CommandLine](IMPORTANT): Rowe_600LCM.loadControl (none)
2018-11-15T04:52:47.829Z,1542257567.829 [CommandLine](IMPORTANT): RudderServo.loadControl (none)
2018-11-15T04:52:47.830Z,1542257567.830 [CommandLine](IMPORTANT): SCPI.loadControl (none)
2018-11-15T04:52:47.830Z,1542257567.830 [CommandLine](IMPORTANT): ThrusterServo.loadControl (none)
2018-11-15T04:52:47.831Z,1542257567.831 [CommandLine](IMPORTANT): Turbulence_NPS.loadControl (none)
2018-11-15T04:52:47.831Z,1542257567.831 [CommandLine](IMPORTANT): VemcoVR2C.loadControl (none)
2018-11-15T04:52:47.832Z,1542257567.832 [CommandLine](IMPORTANT): WetLabsBB2FL.loadControl (none)
2018-11-15T04:52:47.832Z,1542257567.832 [CommandLine](IMPORTANT): WetLabsSeaOWL_UV_A.loadControl (none)
2018-11-15T04:52:47.907Z,1542257567.907 [CommandLine](IMPORTANT): VeritcalControl.buoyancyLimitHiCC (cubic_centimeter)
2018-11-15T04:52:47.908Z,1542257567.908 [CommandLine](IMPORTANT): RDI_PathfinderUp.loadControl (none)
2018-11-15T04:52:47.913Z,1542257567.913 [CommandLine](IMPORTANT): GobyModem.loadControl (none)
2018-11-15T04:52:47.914Z,1542257567.914 [CommandLine](IMPORTANT): VerticalControl.verticalMode (enum)
2018-11-15T04:52:47.915Z,1542257567.915 [CommandLine](IMPORTANT): VerticalControl.elevatorAngleCmd (radian)
2018-11-15T04:52:47.916Z,1542257567.916 [CommandLine](IMPORTANT): VerticalControl.massPositionCmd (meter)
2018-11-15T04:52:47.937Z,1542257567.937 [CommandLine](IMPORTANT): HorizontalControl.horizontalMode (enum)
2018-11-15T04:52:47.937Z,1542257567.937 [CommandLine](IMPORTANT): HorizontalControl.rudderAngleCmd (radian)
2018-11-15T04:52:47.939Z,1542257567.939 [CommandLine](IMPORTANT): SpeedControl.speedCmd (meter_per_second)
2018-11-15T04:52:47.947Z,1542257567.947 [CommandLine](IMPORTANT): VerticalControl.buoyancyAction (cubic_centimeter)
2018-11-15T04:52:47.947Z,1542257567.947 [CommandLine](IMPORTANT): VerticalControl.elevatorAngleAction (radian)
2018-11-15T04:52:47.947Z,1542257567.947 [CommandLine](IMPORTANT): VerticalControl.massPositionAction (meter)
2018-11-15T04:52:47.948Z,1542257567.948 [CommandLine](IMPORTANT): HorizontalControl.rudderAngleAction (radian)
2018-11-15T04:52:47.948Z,1542257567.948 [CommandLine](IMPORTANT): SpeedControl.propOmegaAction (radian_per_second)
2018-11-15T04:52:48.052Z,1542257568.052 [CommandLine](IMPORTANT): VerticalControl.depthRateCmd (meter_per_second)
2018-11-15T04:52:48.052Z,1542257568.052 [CommandLine](IMPORTANT): VerticalControl.pitchCmd (radian)
2018-11-15T04:52:48.057Z,1542257568.057 [CommandLine](IMPORTANT): VerticalControl.depth2buoyIntInternal (cubic_centimeter)
2018-11-15T04:52:48.058Z,1542257568.058 [CommandLine](IMPORTANT): VerticalControl.depthErrorInternal (meter)
2018-11-15T04:52:48.058Z,1542257568.058 [CommandLine](IMPORTANT): VerticalControl.depthIntegralInternal (radian)
2018-11-15T04:52:48.059Z,1542257568.059 [CommandLine](IMPORTANT): VerticalControl.dtInternal (second)
2018-11-15T04:52:48.059Z,1542257568.059 [CommandLine](IMPORTANT): VerticalControl.elevatorIntegralInternal (radian)
2018-11-15T04:52:48.059Z,1542257568.059 [CommandLine](IMPORTANT): VerticalControl.massIntegralInternal (meter)
2018-11-15T04:52:48.060Z,1542257568.060 [CommandLine](IMPORTANT): VerticalControl.massPitchErrorInternal (radian)
2018-11-15T04:52:48.060Z,1542257568.060 [CommandLine](IMPORTANT): VerticalControl.pitchInternal (radian)
2018-11-15T04:52:48.065Z,1542257568.065 [CommandLine](IMPORTANT): VerticalControl.smoothDepthInternal (meter)
2018-11-15T04:52:48.066Z,1542257568.066 [CommandLine](IMPORTANT): HorizontalControl.headingInternal (radian)
2018-11-15T04:52:48.067Z,1542257568.067 [CommandLine](IMPORTANT): HorizontalControl.smoothHeadingInternal (radian)
2018-11-15T04:52:48.067Z,1542257568.067 [CommandLine](IMPORTANT): HorizontalControl.headingIntegralInternal (radian)
2018-11-15T04:52:48.067Z,1542257568.067 [CommandLine](IMPORTANT): HorizontalControl.xteIntegralInternal (radian)
2018-11-15T04:52:48.068Z,1542257568.068 [CommandLine](IMPORTANT): HorizontalControl.xteInternal (meter)
2018-11-15T04:52:48.068Z,1542257568.068 [CommandLine](IMPORTANT): HorizontalControl.kxteInternal (radian)
2018-11-15T04:52:48.073Z,1542257568.073 [CommandLine](IMPORTANT): HorizontalControl.bearingInternal (radian)
2018-11-15T04:52:48.084Z,1542257568.084 [CommandLine](IMPORTANT): VerticalControl.durationOfLastRun (second)
2018-11-15T04:52:48.084Z,1542257568.084 [CommandLine](IMPORTANT): HorizontalControl.durationOfLastRun (second)
2018-11-15T04:52:48.089Z,1542257568.089 [CommandLine](IMPORTANT): SpeedControl.durationOfLastRun (second)
2018-11-15T04:52:48.089Z,1542257568.089 [CommandLine](IMPORTANT): LoopControl.durationOfLastRun (second)
2018-11-15T04:52:48.090Z,1542257568.090 [CommandLine](IMPORTANT): controlThread.durationOfLastRun (second)
2018-11-15T04:53:05.595Z,1542257585.595 [CommandLine](IMPORTANT): got command show variable sync
2018-11-15T04:53:05.649Z,1542257585.649 [CommandLine](IMPORTANT): AsyncPiEstimator.loadAtStartup (bool)
2018-11-15T04:53:13.778Z,1542257593.778 [CommandLine](IMPORTANT): got command failComponent
2018-11-15T04:53:13.778Z,1542257593.778 [CommandLine](IMPORTANT): Failed components:
2018-11-15T04:53:13.779Z,1542257593.779 [CommandLine](IMPORTANT): No failed Components.
2018-11-15T04:53:17.923Z,1542257597.923 [CommandLine](IMPORTANT): got command restart application
2018-11-15T04:53:18.928Z,1542257598.928 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2018-11-15T04:53:18.928Z,1542257598.928 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:19.073Z,1542257599.073 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2018-11-15T04:53:19.073Z,1542257599.073 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:19.074Z,1542257599.074 [CommandLine](INFO): Join timeout helper Thread ID is 1987
2018-11-15T04:53:19.089Z,1542257599.089 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2018-11-15T04:53:19.089Z,1542257599.089 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:19.090Z,1542257599.090 [NavChartDb](INFO): Join timeout helper Thread ID is 1988
2018-11-15T04:53:19.457Z,1542257599.457 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2018-11-15T04:53:19.457Z,1542257599.457 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:19.458Z,1542257599.458 [ComponentRegistry](INFO): Shutting down WetLabsSeaOWL_UV_A ThreadHandler
2018-11-15T04:53:19.458Z,1542257599.458 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:19.458Z,1542257599.458 [WetLabsSeaOWL_UV_A](INFO): Join timeout helper Thread ID is 1989
2018-11-15T04:53:19.489Z,1542257599.489 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Uninitializing protected caller thread.
2018-11-15T04:53:19.489Z,1542257599.489 [WetLabsSeaOWL_UV_A](INFO): Powering down
2018-11-15T04:53:19.490Z,1542257599.490 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:19.497Z,1542257599.497 [ComponentRegistry](INFO): Shutting down CTD_NeilBrown ThreadHandler
2018-11-15T04:53:19.497Z,1542257599.497 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:19.497Z,1542257599.497 [CTD_NeilBrown](INFO): Join timeout helper Thread ID is 1990
2018-11-15T04:53:19.677Z,1542257599.677 [CTD_NeilBrown ThreadHandler](INFO): Uninitializing protected caller thread.
2018-11-15T04:53:19.677Z,1542257599.677 [CTD_NeilBrown](INFO): Powering down
2018-11-15T04:53:19.689Z,1542257599.689 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:19.697Z,1542257599.697 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2018-11-15T04:53:19.697Z,1542257599.697 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:19.697Z,1542257599.697 [Radio_Surface](INFO): Join timeout helper Thread ID is 1991
2018-11-15T04:53:19.958Z,1542257599.958 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2018-11-15T04:53:19.958Z,1542257599.958 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:19.978Z,1542257599.978 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2018-11-15T04:53:19.978Z,1542257599.978 [logger ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:19.978Z,1542257599.978 [logger](INFO): Join timeout helper Thread ID is 1992
2018-11-15T04:53:20.005Z,1542257600.005 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2018-11-15T04:53:20.005Z,1542257600.005 [logger ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:20.017Z,1542257600.017 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2018-11-15T04:53:20.018Z,1542257600.018 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:20.018Z,1542257600.018 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2018-11-15T04:53:20.018Z,1542257600.018 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:20.018Z,1542257600.018 [controlThread](INFO): Join timeout helper Thread ID is 1993
2018-11-15T04:53:20.201Z,1542257600.201 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2018-11-15T04:53:20.201Z,1542257600.201 [controlThread](DEBUG): Uninitializing ControlThread
2018-11-15T04:53:20.201Z,1542257600.201 [AHRS_M2](INFO): Powering down
2018-11-15T04:53:20.274Z,1542257600.274 [NAL9602](INFO): Powering down
2018-11-15T04:53:20.345Z,1542257600.345 [RDI_Pathfinder](INFO): Powering down
2018-11-15T04:53:20.346Z,1542257600.346 [RDI_PathfinderUp](INFO): Powering down
2018-11-15T04:53:20.347Z,1542257600.347 [Aanderaa_O2](INFO): Powering down
2018-11-15T04:53:20.348Z,1542257600.348 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-11-15T04:53:20.349Z,1542257600.349 [ElevatorOffsetCalculator](DEBUG): Uninitializing ElevatorOffsetCalculator.
2018-11-15T04:53:20.350Z,1542257600.350 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2018-11-15T04:53:20.350Z,1542257600.350 [MissionManager](INFO): Uninitializing Mission Default
2018-11-15T04:53:20.350Z,1542257600.350 [Default] Stopped
2018-11-15T04:53:20.350Z,1542257600.350 [Default](DEBUG): Aggregate::uninitialize Default
2018-11-15T04:53:20.350Z,1542257600.350 [Default:B.GoToSurface] Stopped
2018-11-15T04:53:20.351Z,1542257600.351 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-11-15T04:53:20.351Z,1542257600.351 [Default:CheckIn] Stopped
2018-11-15T04:53:20.351Z,1542257600.351 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-11-15T04:53:20.351Z,1542257600.351 [Default:CheckIn:Read_GPS] Stopped
2018-11-15T04:53:20.354Z,1542257600.354 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2018-11-15T04:53:20.355Z,1542257600.355 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2018-11-15T04:53:20.355Z,1542257600.355 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2018-11-15T04:53:20.355Z,1542257600.355 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2018-11-15T04:53:20.355Z,1542257600.355 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-11-15T04:53:20.356Z,1542257600.356 [BuoyancyServo](INFO): Powering down
2018-11-15T04:53:20.369Z,1542257600.369 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2018-11-15T04:53:20.369Z,1542257600.369 [ElevatorServo](INFO): Powering down
2018-11-15T04:53:20.370Z,1542257600.370 [MassServo](DEBUG): Uninitialize Mass Servo.
2018-11-15T04:53:20.370Z,1542257600.370 [MassServo](INFO): Powering down
2018-11-15T04:53:20.371Z,1542257600.371 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2018-11-15T04:53:20.371Z,1542257600.371 [RudderServo](INFO): Powering down
2018-11-15T04:53:20.372Z,1542257600.372 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2018-11-15T04:53:20.372Z,1542257600.372 [ThrusterServo](INFO): Powering down
2018-11-15T04:53:20.373Z,1542257600.373 [SBIT](DEBUG): Uninitialize SBIT Component.
2018-11-15T04:53:20.373Z,1542257600.373 [IBIT](DEBUG): Uninitialize IBIT Component.
2018-11-15T04:53:20.373Z,1542257600.373 [CBIT](DEBUG): Uninitialize CBIT Component.
2018-11-15T04:53:20.374Z,1542257600.374 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:20.464Z,1542257600.464 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:20.506Z,1542257600.506 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:20.508Z,1542257600.508 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:20.530Z,1542257600.530 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-11-15T04:53:20.584Z,1542257600.584 [logger ThreadHandler](INFO): Thread cancelled.