2018-10-08T07:41:06.901Z,1538984466.901 [Default:E.Execute](INFO): Executing command restart logs 2018-10-08T07:41:06.903Z,1538984466.903 [Default:E.Execute] Stopped 2018-10-08T07:41:06.904Z,1538984466.904 [Default](INFO): Completed Default 2018-10-08T07:41:06.904Z,1538984466.904 [Default] Stopped 2018-10-08T07:41:06.904Z,1538984466.904 [Default](DEBUG): Aggregate::uninitialize Default 2018-10-08T07:41:06.904Z,1538984466.904 [Default:B.GoToSurface] Stopped 2018-10-08T07:41:06.904Z,1538984466.904 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent. 2018-10-08T07:41:06.906Z,1538984466.906 [CommandLine](IMPORTANT): got command restart logs 2018-10-08T07:41:07.268Z,1538984467.268 [MissionManager](IMPORTANT): Started mission Default 2018-10-08T07:41:07.268Z,1538984467.268 [Default] Running Loop=1 2018-10-08T07:41:07.269Z,1538984467.269 [Default](DEBUG): Aggregate::initialize Default 2018-10-08T07:41:07.269Z,1538984467.269 [Default:B.GoToSurface] Running Loop=1 2018-10-08T07:41:07.269Z,1538984467.269 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent. 2018-10-08T07:41:07.269Z,1538984467.269 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s. 2018-10-08T07:41:07.270Z,1538984467.270 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees. 2018-10-08T07:41:07.270Z,1538984467.270 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s. 2018-10-08T07:41:07.270Z,1538984467.270 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds. 2018-10-08T07:41:07.271Z,1538984467.271 [Default:B.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds. 2018-10-08T07:41:07.271Z,1538984467.271 [Default:A.Wait] Running Loop=1 2018-10-08T07:41:07.271Z,1538984467.271 [Default:A.Wait](DEBUG): Initialize Wait Component. 2018-10-08T07:41:20.493Z,1538984480.493 [Default:A.Wait](INFO): Done Waiting. 2018-10-08T07:41:20.494Z,1538984480.494 [Default:A.Wait] Stopped 2018-10-08T07:41:20.494Z,1538984480.494 [Default:A.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T07:41:20.898Z,1538984480.898 [Default:CheckIn] Running Loop=1 2018-10-08T07:41:20.898Z,1538984480.898 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T07:41:20.898Z,1538984480.898 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T07:42:06.027Z,1538984526.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T07:42:06.027Z,1538984526.027 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-10-08T07:42:06.027Z,1538984526.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T07:42:06.029Z,1538984526.029 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T07:42:06.029Z,1538984526.029 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-10-08T07:42:06.029Z,1538984526.029 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T07:42:06.043Z,1538984526.043 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T07:42:06.043Z,1538984526.043 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T07:42:06.410Z,1538984526.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T07:42:06.411Z,1538984526.411 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-10-08T07:42:06.411Z,1538984526.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T07:42:06.411Z,1538984526.411 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-10-08T07:42:06.810Z,1538984526.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T07:42:06.810Z,1538984526.810 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T07:42:06.810Z,1538984526.810 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T07:42:06.811Z,1538984526.811 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T07:42:06.811Z,1538984526.811 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T07:42:06.812Z,1538984526.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T07:43:08.439Z,1538984588.439 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T07:43:08.439Z,1538984588.439 [NAL9602] Data Fault, FailCount= 1 2018-10-08T07:43:08.439Z,1538984588.439 [NAL9602](ERROR): Data Fault 2018-10-08T07:43:08.528Z,1538984588.528 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T07:43:08.871Z,1538984588.871 [NAL9602](INFO): Powering down 2018-10-08T07:43:12.244Z,1538984592.244 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T07:43:12.244Z,1538984592.244 [NAL9602] No Fault, FailCount= 1 2018-10-08T07:43:25.806Z,1538984605.806 [RDI_Pathfinder](ERROR): Failed to parse: 2018-10-08T07:43:38.971Z,1538984618.971 [NAL9602](INFO): Powering up NAL9602 2018-10-08T07:43:49.827Z,1538984629.827 [NAL9602](INFO): NAL9602 initialized 2018-10-08T07:45:06.856Z,1538984706.856 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T07:45:06.856Z,1538984706.856 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-10-08T07:45:06.856Z,1538984706.856 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T07:45:06.858Z,1538984706.858 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T07:45:06.858Z,1538984706.858 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-10-08T07:45:06.858Z,1538984706.858 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T07:45:06.892Z,1538984706.892 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T07:45:06.892Z,1538984706.892 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T07:45:07.243Z,1538984707.243 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T07:45:07.243Z,1538984707.243 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-10-08T07:45:07.244Z,1538984707.244 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T07:45:07.244Z,1538984707.244 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-10-08T07:45:07.634Z,1538984707.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T07:45:07.634Z,1538984707.634 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T07:45:07.635Z,1538984707.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T07:45:07.635Z,1538984707.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T07:45:07.635Z,1538984707.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T07:45:07.636Z,1538984707.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T07:46:21.077Z,1538984781.077 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T07:41:20.9Z 2018-10-08T07:46:21.077Z,1538984781.077 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T07:46:21.077Z,1538984781.077 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T07:46:28.788Z,1538984788.788 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181006T055736/Courier0864.lzma 2018-10-08T07:46:29.592Z,1538984789.592 [DataOverHttps](INFO): Moved sent file to Logs/20181006T055736/Courier0864.lzma.bak 2018-10-08T07:46:29.592Z,1538984789.592 [DataOverHttps](INFO): SBD MOMSN=8613636 2018-10-08T07:46:41.137Z,1538984801.137 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0000.lzma 2018-10-08T07:46:41.912Z,1538984801.912 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0000.lzma.bak 2018-10-08T07:46:41.913Z,1538984801.913 [DataOverHttps](INFO): SBD MOMSN=8613638 2018-10-08T07:46:53.160Z,1538984813.160 [DataOverHttps](INFO): Sending 150 bytes from file Logs/20181006T055736/Express0865.lzma 2018-10-08T07:46:53.722Z,1538984813.722 [DataOverHttps](INFO): Moved sent file to Logs/20181006T055736/Express0865.lzma.bak 2018-10-08T07:46:53.723Z,1538984813.723 [DataOverHttps](INFO): SBD MOMSN=8613641 2018-10-08T07:47:02.996Z,1538984822.996 [DataOverHttps](INFO): Sending 273 bytes from file Logs/20181008T074106/Express0001.lzma 2018-10-08T07:47:03.768Z,1538984823.768 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0001.lzma.bak 2018-10-08T07:47:03.768Z,1538984823.768 [DataOverHttps](INFO): SBD MOMSN=8613643 2018-10-08T07:47:04.872Z,1538984824.872 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T07:47:04.872Z,1538984824.872 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T07:47:04.872Z,1538984824.872 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T07:48:08.033Z,1538984888.033 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T07:48:08.034Z,1538984888.034 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-10-08T07:48:08.034Z,1538984888.034 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T07:48:08.035Z,1538984888.035 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T07:48:08.036Z,1538984888.036 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-10-08T07:48:08.036Z,1538984888.036 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T07:48:08.066Z,1538984888.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T07:48:08.066Z,1538984888.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T07:48:08.437Z,1538984888.437 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T07:48:08.437Z,1538984888.437 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-10-08T07:48:08.438Z,1538984888.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T07:48:08.438Z,1538984888.438 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-10-08T07:48:08.820Z,1538984888.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T07:48:08.821Z,1538984888.821 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T07:48:08.821Z,1538984888.821 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T07:48:08.822Z,1538984888.822 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T07:48:08.822Z,1538984888.822 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T07:48:08.823Z,1538984888.823 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T07:51:08.965Z,1538985068.965 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T07:51:08.965Z,1538985068.965 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-10-08T07:51:08.966Z,1538985068.966 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T07:51:08.967Z,1538985068.967 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T07:51:08.967Z,1538985068.967 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-10-08T07:51:08.968Z,1538985068.968 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T07:51:08.994Z,1538985068.994 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T07:51:08.995Z,1538985068.995 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T07:51:09.349Z,1538985069.349 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T07:51:09.349Z,1538985069.349 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-10-08T07:51:09.350Z,1538985069.350 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T07:51:09.350Z,1538985069.350 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-10-08T07:51:09.723Z,1538985069.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T07:51:09.723Z,1538985069.723 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T07:51:09.724Z,1538985069.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T07:51:09.724Z,1538985069.724 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T07:51:09.724Z,1538985069.724 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T07:51:09.725Z,1538985069.725 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T07:52:05.133Z,1538985125.133 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T07:52:05.133Z,1538985125.133 [Default:CheckIn:C.Wait] Stopped 2018-10-08T07:52:05.134Z,1538985125.134 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T07:52:05.134Z,1538985125.134 [Default:CheckIn:D] Running Loop=1 2018-10-08T07:52:05.538Z,1538985125.538 [Default:CheckIn:D] Stopped 2018-10-08T07:52:05.538Z,1538985125.538 [Default:CheckIn:E] Running Loop=1 2018-10-08T07:52:05.946Z,1538985125.946 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.971155 min 2018-10-08T07:52:05.946Z,1538985125.946 [Default:CheckIn:E] Stopped 2018-10-08T07:52:05.946Z,1538985125.946 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T07:52:05.947Z,1538985125.947 [Default:CheckIn] Stopped 2018-10-08T07:52:05.947Z,1538985125.947 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T07:52:05.947Z,1538985125.947 [Default:CheckIn](INFO): Running loop #2 2018-10-08T07:52:05.947Z,1538985125.947 [Default:CheckIn] Running Loop=2 2018-10-08T07:52:05.947Z,1538985125.947 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T07:52:05.947Z,1538985125.947 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T07:53:03.004Z,1538985183.004 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T07:53:51.823Z,1538985231.823 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T07:53:51.823Z,1538985231.823 [NAL9602] Data Fault, FailCount= 2 2018-10-08T07:53:51.823Z,1538985231.823 [NAL9602](ERROR): Data Fault 2018-10-08T07:53:51.909Z,1538985231.909 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T07:53:52.223Z,1538985232.223 [NAL9602](INFO): Powering down 2018-10-08T07:53:53.101Z,1538985233.101 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T07:53:53.101Z,1538985233.101 [NAL9602] No Fault, FailCount= 2 2018-10-08T07:54:12.254Z,1538985252.254 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T07:54:12.254Z,1538985252.254 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-10-08T07:54:12.254Z,1538985252.254 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T07:54:12.256Z,1538985252.256 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T07:54:12.256Z,1538985252.256 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-10-08T07:54:12.256Z,1538985252.256 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T07:54:12.269Z,1538985252.269 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T07:54:12.270Z,1538985252.270 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T07:54:12.407Z,1538985252.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T07:54:12.407Z,1538985252.407 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-10-08T07:54:12.407Z,1538985252.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T07:54:12.407Z,1538985252.407 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-10-08T07:54:12.756Z,1538985252.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T07:54:12.757Z,1538985252.757 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T07:54:12.757Z,1538985252.757 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T07:54:12.769Z,1538985252.769 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T07:54:12.769Z,1538985252.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T07:54:12.770Z,1538985252.770 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T07:54:22.287Z,1538985262.287 [NAL9602](INFO): Powering up NAL9602 2018-10-08T07:54:33.099Z,1538985273.099 [NAL9602](INFO): NAL9602 initialized 2018-10-08T07:57:08.727Z,1538985428.727 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T07:52:05.9Z 2018-10-08T07:57:08.727Z,1538985428.727 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T07:57:08.727Z,1538985428.727 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T07:57:13.645Z,1538985433.645 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T07:57:13.645Z,1538985433.645 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-10-08T07:57:13.645Z,1538985433.645 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T07:57:13.648Z,1538985433.648 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T07:57:13.653Z,1538985433.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-10-08T07:57:13.653Z,1538985433.653 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T07:57:13.699Z,1538985433.699 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T07:57:13.699Z,1538985433.699 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T07:57:13.740Z,1538985433.740 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0003.lzma 2018-10-08T07:57:13.847Z,1538985433.847 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T07:57:13.847Z,1538985433.847 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-10-08T07:57:13.848Z,1538985433.848 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T07:57:13.848Z,1538985433.848 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-10-08T07:57:14.186Z,1538985434.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T07:57:14.186Z,1538985434.186 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T07:57:14.187Z,1538985434.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T07:57:14.187Z,1538985434.187 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T07:57:14.188Z,1538985434.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T07:57:14.188Z,1538985434.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T07:57:14.516Z,1538985434.516 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0003.lzma.bak 2018-10-08T07:57:14.516Z,1538985434.516 [DataOverHttps](INFO): SBD MOMSN=8613649 2018-10-08T07:57:20.141Z,1538985440.141 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T07:57:23.849Z,1538985443.849 [DataOverHttps](INFO): Sending 170 bytes from file Logs/20181008T074106/Express0004.lzma 2018-10-08T07:57:24.620Z,1538985444.620 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0004.lzma.bak 2018-10-08T07:57:24.620Z,1538985444.620 [DataOverHttps](INFO): SBD MOMSN=8613651 2018-10-08T07:57:25.774Z,1538985445.774 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T07:57:25.774Z,1538985445.774 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T07:57:25.774Z,1538985445.774 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T08:00:14.463Z,1538985614.463 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:00:14.463Z,1538985614.463 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-10-08T08:00:14.463Z,1538985614.463 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:00:14.469Z,1538985614.469 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:00:14.469Z,1538985614.469 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-10-08T08:00:14.470Z,1538985614.470 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:00:14.495Z,1538985614.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:00:14.495Z,1538985614.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:00:14.904Z,1538985614.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:00:14.904Z,1538985614.904 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-10-08T08:00:14.904Z,1538985614.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:00:14.904Z,1538985614.904 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-10-08T08:00:15.266Z,1538985615.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:00:15.266Z,1538985615.266 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:00:15.267Z,1538985615.267 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:00:15.267Z,1538985615.267 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:00:15.267Z,1538985615.267 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:00:15.268Z,1538985615.268 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:00:26.970Z,1538985626.970 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T08:01:57.072Z,1538985717.072 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error 2018-10-08T08:01:57.072Z,1538985717.072 [RDI_Pathfinder](ERROR): Failed to parse: :TS,18100801070051,35, 0.0,1448.9, 0 2018-10-08T08:02:02.705Z,1538985722.705 [RDI_Pathfinder](ERROR): only read 1 of 1 data item for altitude 2018-10-08T08:02:02.706Z,1538985722.706 [RDI_Pathfinder](ERROR): Failed to parse: :HM,G0ffe, 15.894, -0.002, 0.000 2018-10-08T08:02:25.992Z,1538985745.992 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T08:02:25.992Z,1538985745.992 [Default:CheckIn:C.Wait] Stopped 2018-10-08T08:02:25.992Z,1538985745.992 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T08:02:25.992Z,1538985745.992 [Default:CheckIn:D] Running Loop=1 2018-10-08T08:02:26.398Z,1538985746.398 [Default:CheckIn:D] Stopped 2018-10-08T08:02:26.398Z,1538985746.398 [Default:CheckIn:E] Running Loop=1 2018-10-08T08:02:26.784Z,1538985746.784 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.318817 min 2018-10-08T08:02:26.784Z,1538985746.784 [Default:CheckIn:E] Stopped 2018-10-08T08:02:26.784Z,1538985746.784 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T08:02:26.785Z,1538985746.785 [Default:CheckIn] Stopped 2018-10-08T08:02:26.789Z,1538985746.789 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T08:02:26.789Z,1538985746.789 [Default:CheckIn](INFO): Running loop #3 2018-10-08T08:02:26.789Z,1538985746.789 [Default:CheckIn] Running Loop=3 2018-10-08T08:02:26.789Z,1538985746.789 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T08:02:26.789Z,1538985746.789 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T08:03:15.279Z,1538985795.279 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:03:15.279Z,1538985795.279 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-10-08T08:03:15.279Z,1538985795.279 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:03:15.281Z,1538985795.281 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:03:15.281Z,1538985795.281 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-10-08T08:03:15.281Z,1538985795.281 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:03:15.295Z,1538985795.295 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:03:15.295Z,1538985795.295 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:03:15.730Z,1538985795.730 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:03:15.730Z,1538985795.730 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-10-08T08:03:15.730Z,1538985795.730 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:03:15.730Z,1538985795.730 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-10-08T08:03:16.087Z,1538985796.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:03:16.088Z,1538985796.088 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:03:16.088Z,1538985796.088 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:03:16.088Z,1538985796.088 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:03:16.093Z,1538985796.093 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:03:16.093Z,1538985796.093 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:04:33.964Z,1538985873.964 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T08:04:35.541Z,1538985875.541 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T08:04:35.542Z,1538985875.542 [NAL9602] Data Fault, FailCount= 3 2018-10-08T08:04:35.542Z,1538985875.542 [NAL9602](ERROR): Data Fault 2018-10-08T08:04:35.604Z,1538985875.604 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T08:04:35.927Z,1538985875.927 [NAL9602](INFO): Powering down 2018-10-08T08:04:36.793Z,1538985876.793 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T08:04:36.793Z,1538985876.793 [NAL9602] No Fault, FailCount= 3 2018-10-08T08:05:07.905Z,1538985907.905 [NAL9602](INFO): Powering up NAL9602 2018-10-08T08:05:18.813Z,1538985918.813 [NAL9602](INFO): NAL9602 initialized 2018-10-08T08:06:18.510Z,1538985978.510 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:06:18.510Z,1538985978.510 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-10-08T08:06:18.510Z,1538985978.510 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:06:18.514Z,1538985978.514 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:06:18.514Z,1538985978.514 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-10-08T08:06:18.514Z,1538985978.514 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:06:18.537Z,1538985978.537 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:06:18.538Z,1538985978.538 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:06:18.671Z,1538985978.671 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:06:18.671Z,1538985978.671 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-10-08T08:06:18.671Z,1538985978.671 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:06:18.671Z,1538985978.671 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-10-08T08:06:19.022Z,1538985979.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:06:19.022Z,1538985979.022 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:06:19.023Z,1538985979.023 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:06:19.023Z,1538985979.023 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:06:19.024Z,1538985979.024 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:06:19.024Z,1538985979.024 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:07:29.034Z,1538986049.034 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T08:02:26.8Z 2018-10-08T08:07:29.034Z,1538986049.034 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T08:07:29.034Z,1538986049.034 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T08:07:34.011Z,1538986054.011 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0006.lzma 2018-10-08T08:07:34.788Z,1538986054.788 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0006.lzma.bak 2018-10-08T08:07:34.789Z,1538986054.789 [DataOverHttps](INFO): SBD MOMSN=8613657 2018-10-08T08:07:44.118Z,1538986064.118 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181008T074106/Express0007.lzma 2018-10-08T08:07:44.872Z,1538986064.872 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0007.lzma.bak 2018-10-08T08:07:44.872Z,1538986064.872 [DataOverHttps](INFO): SBD MOMSN=8613659 2018-10-08T08:07:45.955Z,1538986065.955 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T08:07:45.955Z,1538986065.955 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T08:07:45.955Z,1538986065.955 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T08:09:19.120Z,1538986159.120 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:09:19.121Z,1538986159.121 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-10-08T08:09:19.137Z,1538986159.137 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:09:19.139Z,1538986159.139 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:09:19.139Z,1538986159.139 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-10-08T08:09:19.139Z,1538986159.139 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:09:19.164Z,1538986159.164 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:09:19.173Z,1538986159.173 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:09:19.534Z,1538986159.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:09:19.534Z,1538986159.534 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-10-08T08:09:19.535Z,1538986159.535 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:09:19.535Z,1538986159.535 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-10-08T08:09:19.909Z,1538986159.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:09:19.910Z,1538986159.910 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:09:19.910Z,1538986159.910 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:09:19.910Z,1538986159.910 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:09:19.911Z,1538986159.911 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:09:19.911Z,1538986159.911 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:12:20.057Z,1538986340.057 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:12:20.057Z,1538986340.057 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-10-08T08:12:20.057Z,1538986340.057 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:12:20.059Z,1538986340.059 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:12:20.059Z,1538986340.059 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-10-08T08:12:20.059Z,1538986340.059 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:12:20.093Z,1538986340.093 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:12:20.093Z,1538986340.093 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:12:20.455Z,1538986340.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:12:20.455Z,1538986340.455 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-10-08T08:12:20.456Z,1538986340.456 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:12:20.456Z,1538986340.456 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-10-08T08:12:20.810Z,1538986340.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:12:20.810Z,1538986340.810 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:12:20.811Z,1538986340.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:12:20.811Z,1538986340.811 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:12:20.812Z,1538986340.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:12:20.812Z,1538986340.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:12:46.161Z,1538986366.161 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T08:12:46.161Z,1538986366.161 [Default:CheckIn:C.Wait] Stopped 2018-10-08T08:12:46.161Z,1538986366.161 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T08:12:46.161Z,1538986366.161 [Default:CheckIn:D] Running Loop=1 2018-10-08T08:12:46.561Z,1538986366.561 [Default:CheckIn:D] Stopped 2018-10-08T08:12:46.561Z,1538986366.561 [Default:CheckIn:E] Running Loop=1 2018-10-08T08:12:46.965Z,1538986366.965 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.654867 min 2018-10-08T08:12:46.965Z,1538986366.965 [Default:CheckIn:E] Stopped 2018-10-08T08:12:46.965Z,1538986366.965 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T08:12:46.965Z,1538986366.965 [Default:CheckIn] Stopped 2018-10-08T08:12:46.966Z,1538986366.966 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T08:12:46.966Z,1538986366.966 [Default:CheckIn](INFO): Running loop #4 2018-10-08T08:12:46.966Z,1538986366.966 [Default:CheckIn] Running Loop=4 2018-10-08T08:12:46.966Z,1538986366.966 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T08:12:46.966Z,1538986366.966 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T08:15:20.955Z,1538986520.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:15:20.955Z,1538986520.955 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-10-08T08:15:20.955Z,1538986520.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:15:20.978Z,1538986520.978 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:15:20.978Z,1538986520.978 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-10-08T08:15:20.978Z,1538986520.978 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:15:21.018Z,1538986521.018 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:15:21.019Z,1538986521.019 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:15:21.409Z,1538986521.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:15:21.409Z,1538986521.409 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-10-08T08:15:21.409Z,1538986521.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:15:21.410Z,1538986521.410 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-10-08T08:15:21.727Z,1538986521.727 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T08:15:21.727Z,1538986521.727 [NAL9602] Data Fault, FailCount= 4 2018-10-08T08:15:21.727Z,1538986521.727 [NAL9602](ERROR): Data Fault 2018-10-08T08:15:21.774Z,1538986521.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:15:21.775Z,1538986521.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:15:21.775Z,1538986521.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:15:21.776Z,1538986521.776 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:15:21.776Z,1538986521.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:15:21.776Z,1538986521.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:15:21.805Z,1538986521.805 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T08:15:22.127Z,1538986522.127 [NAL9602](INFO): Powering down 2018-10-08T08:15:22.989Z,1538986522.989 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T08:15:22.989Z,1538986522.989 [NAL9602] No Fault, FailCount= 4 2018-10-08T08:15:52.211Z,1538986552.211 [NAL9602](INFO): Powering up NAL9602 2018-10-08T08:16:03.895Z,1538986563.895 [NAL9602](INFO): NAL9602 initialized 2018-10-08T08:17:49.298Z,1538986669.298 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T08:12:46.0Z 2018-10-08T08:17:49.298Z,1538986669.298 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T08:17:49.298Z,1538986669.298 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T08:17:54.294Z,1538986674.294 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0009.lzma 2018-10-08T08:17:55.052Z,1538986675.052 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0009.lzma.bak 2018-10-08T08:17:55.052Z,1538986675.052 [DataOverHttps](INFO): SBD MOMSN=8613665 2018-10-08T08:18:05.205Z,1538986685.205 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181008T074106/Express0010.lzma 2018-10-08T08:18:05.964Z,1538986685.964 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0010.lzma.bak 2018-10-08T08:18:05.964Z,1538986685.964 [DataOverHttps](INFO): SBD MOMSN=8613667 2018-10-08T08:18:07.057Z,1538986687.057 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T08:18:07.057Z,1538986687.057 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T08:18:07.057Z,1538986687.057 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T08:18:22.076Z,1538986702.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:18:22.076Z,1538986702.076 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-10-08T08:18:22.076Z,1538986702.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:18:22.078Z,1538986702.078 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:18:22.078Z,1538986702.078 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-10-08T08:18:22.078Z,1538986702.078 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:18:22.091Z,1538986702.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:18:22.091Z,1538986702.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:18:22.490Z,1538986702.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:18:22.490Z,1538986702.490 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-10-08T08:18:22.491Z,1538986702.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:18:22.491Z,1538986702.491 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-10-08T08:18:22.856Z,1538986702.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:18:22.861Z,1538986702.861 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:18:22.861Z,1538986702.861 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:18:22.862Z,1538986702.862 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:18:22.862Z,1538986702.862 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:18:22.862Z,1538986702.862 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:20:27.048Z,1538986827.048 [RDI_Pathfinder](ERROR): only read 3 of 5 data items 2018-10-08T08:20:27.048Z,1538986827.048 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-3768,V 2018-10-08T08:21:22.968Z,1538986882.968 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:21:22.968Z,1538986882.968 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-10-08T08:21:22.968Z,1538986882.968 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:21:22.978Z,1538986882.978 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:21:22.978Z,1538986882.978 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-10-08T08:21:22.978Z,1538986882.978 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:21:23.024Z,1538986883.024 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:21:23.024Z,1538986883.024 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:21:23.375Z,1538986883.375 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:21:23.375Z,1538986883.375 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-10-08T08:21:23.376Z,1538986883.376 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:21:23.376Z,1538986883.376 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-10-08T08:21:23.747Z,1538986883.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:21:23.747Z,1538986883.747 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:21:23.748Z,1538986883.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:21:23.748Z,1538986883.748 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:21:23.748Z,1538986883.748 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:21:23.749Z,1538986883.749 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:23:07.332Z,1538986987.332 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T08:23:07.332Z,1538986987.332 [Default:CheckIn:C.Wait] Stopped 2018-10-08T08:23:07.333Z,1538986987.333 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T08:23:07.333Z,1538986987.333 [Default:CheckIn:D] Running Loop=1 2018-10-08T08:23:07.769Z,1538986987.769 [Default:CheckIn:D] Stopped 2018-10-08T08:23:07.769Z,1538986987.769 [Default:CheckIn:E] Running Loop=1 2018-10-08T08:23:08.155Z,1538986988.155 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 42.008333 min 2018-10-08T08:23:08.155Z,1538986988.155 [Default:CheckIn:E] Stopped 2018-10-08T08:23:08.155Z,1538986988.155 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T08:23:08.155Z,1538986988.155 [Default:CheckIn] Stopped 2018-10-08T08:23:08.155Z,1538986988.155 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T08:23:08.155Z,1538986988.155 [Default:CheckIn](INFO): Running loop #5 2018-10-08T08:23:08.156Z,1538986988.156 [Default:CheckIn] Running Loop=5 2018-10-08T08:23:08.156Z,1538986988.156 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T08:23:08.156Z,1538986988.156 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T08:24:23.971Z,1538987063.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:24:23.972Z,1538987063.972 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-10-08T08:24:23.972Z,1538987063.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:24:23.978Z,1538987063.978 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:24:23.978Z,1538987063.978 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-10-08T08:24:23.978Z,1538987063.978 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:24:24.003Z,1538987064.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:24:24.004Z,1538987064.004 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:24:24.004Z,1538987064.004 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:24:24.004Z,1538987064.004 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:24:42.079Z,1538987082.079 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-10-08T08:26:06.251Z,1538987166.251 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T08:26:06.251Z,1538987166.251 [NAL9602] Data Fault, FailCount= 5 2018-10-08T08:26:06.251Z,1538987166.251 [NAL9602](ERROR): Data Fault 2018-10-08T08:26:06.327Z,1538987166.327 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T08:26:06.328Z,1538987166.328 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-10-08T08:26:06.670Z,1538987166.670 [NAL9602](INFO): Powering down 2018-10-08T08:26:06.742Z,1538987166.742 [CBIT](INFO): Critical error at 20181008T082606 2018-10-08T08:28:06.443Z,1538987286.443 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T08:28:06.443Z,1538987286.443 [NAL9602] No Fault, FailCount= 5 2018-10-08T08:28:06.775Z,1538987286.775 [NAL9602](INFO): Powering up NAL9602 2018-10-08T08:28:10.429Z,1538987290.429 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T08:23:08.2Z 2018-10-08T08:28:10.433Z,1538987290.433 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T08:28:10.433Z,1538987290.433 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T08:28:15.401Z,1538987295.401 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20181008T074106/Courier0012.lzma 2018-10-08T08:28:16.176Z,1538987296.176 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0012.lzma.bak 2018-10-08T08:28:16.176Z,1538987296.176 [DataOverHttps](INFO): SBD MOMSN=8613673 2018-10-08T08:28:20.499Z,1538987300.499 [NAL9602](INFO): NAL9602 initialized 2018-10-08T08:28:25.513Z,1538987305.513 [DataOverHttps](INFO): Sending 241 bytes from file Logs/20181008T074106/Express0013.lzma 2018-10-08T08:28:26.276Z,1538987306.276 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0013.lzma.bak 2018-10-08T08:28:26.276Z,1538987306.276 [DataOverHttps](INFO): SBD MOMSN=8613675 2018-10-08T08:28:27.343Z,1538987307.343 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T08:28:27.343Z,1538987307.343 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T08:28:27.343Z,1538987307.343 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T08:33:27.623Z,1538987607.623 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T08:33:27.623Z,1538987607.623 [Default:CheckIn:C.Wait] Stopped 2018-10-08T08:33:27.623Z,1538987607.623 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T08:33:27.623Z,1538987607.623 [Default:CheckIn:D] Running Loop=1 2018-10-08T08:33:28.019Z,1538987608.019 [Default:CheckIn:D] Stopped 2018-10-08T08:33:28.019Z,1538987608.019 [Default:CheckIn:E] Running Loop=1 2018-10-08T08:33:28.403Z,1538987608.403 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 52.345841 min 2018-10-08T08:33:28.403Z,1538987608.403 [Default:CheckIn:E] Stopped 2018-10-08T08:33:28.404Z,1538987608.404 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T08:33:28.404Z,1538987608.404 [Default:CheckIn] Stopped 2018-10-08T08:33:28.404Z,1538987608.404 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T08:33:28.404Z,1538987608.404 [Default:CheckIn](INFO): Running loop #6 2018-10-08T08:33:28.404Z,1538987608.404 [Default:CheckIn] Running Loop=6 2018-10-08T08:33:28.404Z,1538987608.404 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T08:33:28.404Z,1538987608.404 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T08:38:21.095Z,1538987901.095 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T08:38:21.095Z,1538987901.095 [NAL9602] Data Fault, FailCount= 1 2018-10-08T08:38:21.095Z,1538987901.095 [NAL9602](ERROR): Data Fault 2018-10-08T08:38:21.171Z,1538987901.171 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T08:38:21.495Z,1538987901.495 [NAL9602](INFO): Powering down 2018-10-08T08:38:22.339Z,1538987902.339 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T08:38:22.339Z,1538987902.339 [NAL9602] No Fault, FailCount= 1 2018-10-08T08:38:30.324Z,1538987910.324 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T08:33:28.4Z 2018-10-08T08:38:30.324Z,1538987910.324 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T08:38:30.324Z,1538987910.324 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T08:38:35.262Z,1538987915.262 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0015.lzma 2018-10-08T08:38:36.028Z,1538987916.028 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0015.lzma.bak 2018-10-08T08:38:36.028Z,1538987916.028 [DataOverHttps](INFO): SBD MOMSN=8613681 2018-10-08T08:38:45.320Z,1538987925.320 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20181008T074106/Express0016.lzma 2018-10-08T08:38:46.096Z,1538987926.096 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0016.lzma.bak 2018-10-08T08:38:46.096Z,1538987926.096 [DataOverHttps](INFO): SBD MOMSN=8613683 2018-10-08T08:38:47.196Z,1538987927.196 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T08:38:47.196Z,1538987927.196 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T08:38:47.197Z,1538987927.197 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T08:38:51.711Z,1538987931.711 [NAL9602](INFO): Powering up NAL9602 2018-10-08T08:39:02.911Z,1538987942.911 [NAL9602](INFO): NAL9602 initialized 2018-10-08T08:39:26.179Z,1538987966.179 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:39:26.179Z,1538987966.179 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-10-08T08:39:26.180Z,1538987966.180 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:39:26.180Z,1538987966.180 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-10-08T08:39:26.290Z,1538987966.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:39:26.290Z,1538987966.290 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:39:26.291Z,1538987966.291 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:39:26.291Z,1538987966.291 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:39:26.291Z,1538987966.291 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:39:26.292Z,1538987966.292 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:42:26.350Z,1538988146.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:42:26.350Z,1538988146.350 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-10-08T08:42:26.351Z,1538988146.351 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:42:26.352Z,1538988146.352 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:42:26.352Z,1538988146.352 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-10-08T08:42:26.353Z,1538988146.353 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:42:26.370Z,1538988146.370 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:42:26.371Z,1538988146.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:42:26.771Z,1538988146.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:42:26.771Z,1538988146.771 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-10-08T08:42:26.772Z,1538988146.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:42:26.772Z,1538988146.772 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-10-08T08:42:27.122Z,1538988147.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:42:27.122Z,1538988147.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:42:27.123Z,1538988147.123 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:42:27.123Z,1538988147.123 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:42:27.123Z,1538988147.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:42:27.124Z,1538988147.124 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:43:47.326Z,1538988227.326 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T08:43:47.327Z,1538988227.327 [Default:CheckIn:C.Wait] Stopped 2018-10-08T08:43:47.327Z,1538988227.327 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T08:43:47.327Z,1538988227.327 [Default:CheckIn:D] Running Loop=1 2018-10-08T08:43:47.766Z,1538988227.766 [Default:CheckIn:D] Stopped 2018-10-08T08:43:47.766Z,1538988227.766 [Default:CheckIn:E] Running Loop=1 2018-10-08T08:43:48.151Z,1538988228.151 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.674959 min 2018-10-08T08:43:48.151Z,1538988228.151 [Default:CheckIn:E] Stopped 2018-10-08T08:43:48.151Z,1538988228.151 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T08:43:48.151Z,1538988228.151 [Default:CheckIn] Stopped 2018-10-08T08:43:48.152Z,1538988228.152 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T08:43:48.152Z,1538988228.152 [Default:CheckIn](INFO): Running loop #7 2018-10-08T08:43:48.152Z,1538988228.152 [Default:CheckIn] Running Loop=7 2018-10-08T08:43:48.152Z,1538988228.152 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T08:43:48.152Z,1538988228.152 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T08:45:27.223Z,1538988327.223 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:45:27.223Z,1538988327.223 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-10-08T08:45:27.223Z,1538988327.223 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:45:27.229Z,1538988327.229 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:45:27.229Z,1538988327.229 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-10-08T08:45:27.229Z,1538988327.229 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:45:27.262Z,1538988327.262 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:45:27.262Z,1538988327.262 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:45:27.672Z,1538988327.672 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:45:27.672Z,1538988327.672 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-10-08T08:45:27.678Z,1538988327.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:45:27.678Z,1538988327.678 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-10-08T08:45:28.053Z,1538988328.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:45:28.054Z,1538988328.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:45:28.054Z,1538988328.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:45:28.054Z,1538988328.054 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:45:28.055Z,1538988328.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:45:28.055Z,1538988328.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:48:28.299Z,1538988508.299 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:48:28.299Z,1538988508.299 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-10-08T08:48:28.299Z,1538988508.299 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:48:28.305Z,1538988508.305 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:48:28.305Z,1538988508.305 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-10-08T08:48:28.305Z,1538988508.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:48:28.332Z,1538988508.332 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:48:28.332Z,1538988508.332 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:48:28.723Z,1538988508.723 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:48:28.724Z,1538988508.724 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-10-08T08:48:28.724Z,1538988508.724 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:48:28.724Z,1538988508.724 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-10-08T08:48:29.113Z,1538988509.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:48:29.114Z,1538988509.114 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:48:29.114Z,1538988509.114 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:48:29.114Z,1538988509.114 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:48:29.115Z,1538988509.115 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:48:29.115Z,1538988509.115 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:48:50.756Z,1538988530.756 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T08:43:48.2Z 2018-10-08T08:48:50.756Z,1538988530.756 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T08:48:50.756Z,1538988530.756 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T08:48:55.692Z,1538988535.692 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0018.lzma 2018-10-08T08:48:56.468Z,1538988536.468 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0018.lzma.bak 2018-10-08T08:48:56.468Z,1538988536.468 [DataOverHttps](INFO): SBD MOMSN=8613689 2018-10-08T08:49:08.704Z,1538988548.704 [DataOverHttps](INFO): Sending 97 bytes from file Logs/20181008T074106/Express0019.lzma 2018-10-08T08:49:08.915Z,1538988548.915 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T08:49:08.915Z,1538988548.915 [NAL9602] Data Fault, FailCount= 2 2018-10-08T08:49:08.915Z,1538988548.915 [NAL9602](ERROR): Data Fault 2018-10-08T08:49:08.977Z,1538988548.977 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T08:49:09.297Z,1538988549.297 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0019.lzma.bak 2018-10-08T08:49:09.298Z,1538988549.298 [DataOverHttps](INFO): SBD MOMSN=8613691 2018-10-08T08:49:09.337Z,1538988549.337 [NAL9602](INFO): Powering down 2018-10-08T08:49:10.346Z,1538988550.346 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T08:49:10.346Z,1538988550.346 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T08:49:10.346Z,1538988550.346 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T08:49:10.476Z,1538988550.476 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T08:49:10.476Z,1538988550.476 [NAL9602] No Fault, FailCount= 2 2018-10-08T08:49:39.679Z,1538988579.679 [NAL9602](INFO): Powering up NAL9602 2018-10-08T08:49:50.451Z,1538988590.451 [NAL9602](INFO): NAL9602 initialized 2018-10-08T08:50:32.998Z,1538988632.998 [RDI_Pathfinder](ERROR): only read 3 of 5 data items 2018-10-08T08:50:32.998Z,1538988632.998 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-3268,-32768,V 2018-10-08T08:51:29.123Z,1538988689.123 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:51:29.123Z,1538988689.123 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-10-08T08:51:29.123Z,1538988689.123 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:51:29.141Z,1538988689.141 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:51:29.141Z,1538988689.141 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-10-08T08:51:29.141Z,1538988689.141 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:51:29.165Z,1538988689.165 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:51:29.165Z,1538988689.165 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:51:29.539Z,1538988689.539 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:51:29.539Z,1538988689.539 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-10-08T08:51:29.540Z,1538988689.540 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:51:29.540Z,1538988689.540 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-10-08T08:51:29.919Z,1538988689.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:51:29.919Z,1538988689.919 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:51:29.920Z,1538988689.920 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:51:29.920Z,1538988689.920 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:51:29.920Z,1538988689.920 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:51:29.925Z,1538988689.925 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:52:19.167Z,1538988739.167 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error 2018-10-08T08:52:19.168Z,1538988739.168 [RDI_Pathfinder](ERROR): Failed to parse: :TS,18100801572251,35.0, -0.11448.9, 0 2018-10-08T08:52:46.896Z,1538988766.896 [RDI_Pathfinder](ERROR): Failed to parse: :BD, +0.00, +0.00, +0.00, 0.00,14645.02 2018-10-08T08:54:10.640Z,1538988850.640 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T08:54:10.645Z,1538988850.645 [Default:CheckIn:C.Wait] Stopped 2018-10-08T08:54:10.645Z,1538988850.645 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T08:54:10.645Z,1538988850.645 [Default:CheckIn:D] Running Loop=1 2018-10-08T08:54:11.063Z,1538988851.063 [Default:CheckIn:D] Stopped 2018-10-08T08:54:11.063Z,1538988851.063 [Default:CheckIn:E] Running Loop=1 2018-10-08T08:54:11.462Z,1538988851.462 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 73.063241 min 2018-10-08T08:54:11.463Z,1538988851.463 [Default:CheckIn:E] Stopped 2018-10-08T08:54:11.463Z,1538988851.463 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T08:54:11.463Z,1538988851.463 [Default:CheckIn] Stopped 2018-10-08T08:54:11.463Z,1538988851.463 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T08:54:11.463Z,1538988851.463 [Default:CheckIn](INFO): Running loop #8 2018-10-08T08:54:11.463Z,1538988851.463 [Default:CheckIn] Running Loop=8 2018-10-08T08:54:11.463Z,1538988851.463 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T08:54:11.463Z,1538988851.463 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T08:54:31.442Z,1538988871.442 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:54:31.442Z,1538988871.442 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-10-08T08:54:31.442Z,1538988871.442 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:54:31.444Z,1538988871.444 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:54:31.444Z,1538988871.444 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-10-08T08:54:31.444Z,1538988871.444 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:54:31.473Z,1538988871.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:54:31.474Z,1538988871.474 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:54:31.580Z,1538988871.580 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:54:31.580Z,1538988871.580 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-10-08T08:54:31.586Z,1538988871.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:54:31.586Z,1538988871.586 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-10-08T08:54:31.967Z,1538988871.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:54:31.967Z,1538988871.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:54:31.968Z,1538988871.968 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:54:31.968Z,1538988871.968 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:54:31.968Z,1538988871.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:54:31.969Z,1538988871.969 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:56:44.608Z,1538989004.608 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude 2018-10-08T08:56:44.608Z,1538989004.608 [RDI_Pathfinder](ERROR): Failed to parse: :BD, , +0.00, +0.00, 0.00,14883.79 2018-10-08T08:57:32.022Z,1538989052.022 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:57:32.022Z,1538989052.022 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-10-08T08:57:32.022Z,1538989052.022 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T08:57:32.024Z,1538989052.024 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T08:57:32.024Z,1538989052.024 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-10-08T08:57:32.024Z,1538989052.024 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T08:57:32.053Z,1538989052.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T08:57:32.054Z,1538989052.054 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T08:57:32.409Z,1538989052.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T08:57:32.409Z,1538989052.409 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-10-08T08:57:32.410Z,1538989052.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T08:57:32.410Z,1538989052.410 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-10-08T08:57:32.826Z,1538989052.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T08:57:32.826Z,1538989052.826 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:57:32.826Z,1538989052.826 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:57:32.827Z,1538989052.827 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T08:57:32.827Z,1538989052.827 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T08:57:32.828Z,1538989052.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T08:58:47.016Z,1538989127.016 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error 2018-10-08T08:58:47.016Z,1538989127.016 [RDI_Pathfinder](ERROR): Failed to parse: :TS,18100802035051,35.0, -0.1, 48.9, 0 2018-10-08T08:59:13.811Z,1538989153.811 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T08:54:11.5Z 2018-10-08T08:59:13.811Z,1538989153.811 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T08:59:13.811Z,1538989153.811 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T08:59:18.834Z,1538989158.834 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0021.lzma 2018-10-08T08:59:19.608Z,1538989159.608 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0021.lzma.bak 2018-10-08T08:59:19.609Z,1538989159.609 [DataOverHttps](INFO): SBD MOMSN=8613697 2018-10-08T08:59:28.952Z,1538989168.952 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181008T074106/Express0022.lzma 2018-10-08T08:59:29.708Z,1538989169.708 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0022.lzma.bak 2018-10-08T08:59:29.708Z,1538989169.708 [DataOverHttps](INFO): SBD MOMSN=8613699 2018-10-08T08:59:30.759Z,1538989170.759 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T08:59:30.759Z,1538989170.759 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T08:59:30.759Z,1538989170.759 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T08:59:52.927Z,1538989192.927 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T08:59:52.927Z,1538989192.927 [NAL9602] Data Fault, FailCount= 3 2018-10-08T08:59:52.927Z,1538989192.927 [NAL9602](ERROR): Data Fault 2018-10-08T08:59:53.019Z,1538989193.019 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T08:59:53.327Z,1538989193.327 [NAL9602](INFO): Powering down 2018-10-08T08:59:54.184Z,1538989194.184 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T08:59:54.184Z,1538989194.184 [NAL9602] No Fault, FailCount= 3 2018-10-08T09:00:23.431Z,1538989223.431 [NAL9602](INFO): Powering up NAL9602 2018-10-08T09:00:33.064Z,1538989233.064 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:00:33.064Z,1538989233.064 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-10-08T09:00:33.064Z,1538989233.064 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:00:33.070Z,1538989233.070 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:00:33.070Z,1538989233.070 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-10-08T09:00:33.070Z,1538989233.070 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:00:33.093Z,1538989233.093 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:00:33.097Z,1538989233.097 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:00:33.487Z,1538989233.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:00:33.488Z,1538989233.488 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-10-08T09:00:33.488Z,1538989233.488 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:00:33.488Z,1538989233.488 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-10-08T09:00:33.896Z,1538989233.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:00:33.901Z,1538989233.901 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:00:33.901Z,1538989233.901 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:00:33.902Z,1538989233.902 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:00:33.902Z,1538989233.902 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:00:33.903Z,1538989233.903 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:00:34.231Z,1538989234.231 [NAL9602](INFO): NAL9602 initialized 2018-10-08T09:03:16.991Z,1538989396.991 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error 2018-10-08T09:03:16.992Z,1538989396.992 [RDI_Pathfinder](ERROR): Failed to parse: :TS,18100802082051,35.0, -.0,1448.9, 0 2018-10-08T09:03:34.191Z,1538989414.191 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:03:34.191Z,1538989414.191 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-10-08T09:03:34.191Z,1538989414.191 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:03:34.193Z,1538989414.193 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:03:34.193Z,1538989414.193 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-10-08T09:03:34.193Z,1538989414.193 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:03:34.214Z,1538989414.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:03:34.215Z,1538989414.215 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:03:34.649Z,1538989414.649 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:03:34.649Z,1538989414.649 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-10-08T09:03:34.650Z,1538989414.650 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:03:34.650Z,1538989414.650 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-10-08T09:03:35.002Z,1538989415.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:03:35.002Z,1538989415.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:03:35.003Z,1538989415.003 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:03:35.003Z,1538989415.003 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:03:35.004Z,1538989415.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:03:35.004Z,1538989415.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:04:31.256Z,1538989471.256 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T09:04:31.256Z,1538989471.256 [Default:CheckIn:C.Wait] Stopped 2018-10-08T09:04:31.256Z,1538989471.256 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T09:04:31.256Z,1538989471.256 [Default:CheckIn:D] Running Loop=1 2018-10-08T09:04:31.667Z,1538989471.667 [Default:CheckIn:D] Stopped 2018-10-08T09:04:31.667Z,1538989471.667 [Default:CheckIn:E] Running Loop=1 2018-10-08T09:04:32.049Z,1538989472.049 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 83.406632 min 2018-10-08T09:04:32.050Z,1538989472.050 [Default:CheckIn:E] Stopped 2018-10-08T09:04:32.050Z,1538989472.050 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T09:04:32.050Z,1538989472.050 [Default:CheckIn] Stopped 2018-10-08T09:04:32.050Z,1538989472.050 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T09:04:32.050Z,1538989472.050 [Default:CheckIn](INFO): Running loop #9 2018-10-08T09:04:32.050Z,1538989472.050 [Default:CheckIn] Running Loop=9 2018-10-08T09:04:32.050Z,1538989472.050 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T09:04:32.051Z,1538989472.051 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T09:06:37.496Z,1538989597.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:06:37.496Z,1538989597.496 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-10-08T09:06:37.496Z,1538989597.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:06:37.498Z,1538989597.498 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:06:37.498Z,1538989597.498 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-10-08T09:06:37.498Z,1538989597.498 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:06:37.511Z,1538989597.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:06:37.511Z,1538989597.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:06:37.679Z,1538989597.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:06:37.679Z,1538989597.679 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-10-08T09:06:37.680Z,1538989597.680 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:06:37.680Z,1538989597.680 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-10-08T09:06:38.010Z,1538989598.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:06:38.011Z,1538989598.011 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:06:38.011Z,1538989598.011 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:06:38.011Z,1538989598.011 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:06:38.012Z,1538989598.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:06:38.012Z,1538989598.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:09:33.986Z,1538989773.986 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T09:04:32.1Z 2018-10-08T09:09:33.986Z,1538989773.986 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T09:09:33.986Z,1538989773.986 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T09:09:38.882Z,1538989778.882 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:09:38.882Z,1538989778.882 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-10-08T09:09:38.882Z,1538989778.882 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:09:38.884Z,1538989778.884 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:09:38.884Z,1538989778.884 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-10-08T09:09:38.884Z,1538989778.884 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:09:38.898Z,1538989778.898 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:09:38.898Z,1538989778.898 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:09:38.946Z,1538989778.946 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0024.lzma 2018-10-08T09:09:39.027Z,1538989779.027 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:09:39.028Z,1538989779.028 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-10-08T09:09:39.028Z,1538989779.028 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:09:39.028Z,1538989779.028 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-10-08T09:09:39.357Z,1538989779.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:09:39.357Z,1538989779.357 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:09:39.358Z,1538989779.358 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:09:39.358Z,1538989779.358 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:09:39.358Z,1538989779.358 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:09:39.359Z,1538989779.359 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:09:39.723Z,1538989779.723 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0024.lzma.bak 2018-10-08T09:09:39.723Z,1538989779.723 [DataOverHttps](INFO): SBD MOMSN=8613705 2018-10-08T09:09:49.009Z,1538989789.009 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181008T074106/Express0025.lzma 2018-10-08T09:09:49.764Z,1538989789.764 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0025.lzma.bak 2018-10-08T09:09:49.764Z,1538989789.764 [DataOverHttps](INFO): SBD MOMSN=8613707 2018-10-08T09:09:50.847Z,1538989790.847 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T09:09:50.847Z,1538989790.847 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T09:09:50.847Z,1538989790.847 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T09:10:35.125Z,1538989835.125 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T09:10:35.126Z,1538989835.126 [NAL9602] Data Fault, FailCount= 4 2018-10-08T09:10:35.126Z,1538989835.126 [NAL9602](ERROR): Data Fault 2018-10-08T09:10:35.218Z,1538989835.218 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T09:10:35.524Z,1538989835.524 [NAL9602](INFO): Powering down 2018-10-08T09:10:36.388Z,1538989836.388 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T09:10:36.388Z,1538989836.388 [NAL9602] No Fault, FailCount= 4 2018-10-08T09:11:05.624Z,1538989865.624 [NAL9602](INFO): Powering up NAL9602 2018-10-08T09:11:16.807Z,1538989876.807 [NAL9602](INFO): NAL9602 initialized 2018-10-08T09:12:11.325Z,1538989931.325 [RDI_Pathfinder](ERROR): only read 3 of 5 data items 2018-10-08T09:12:11.325Z,1538989931.325 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-3268,-32768,V 2018-10-08T09:12:39.434Z,1538989959.434 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:12:39.434Z,1538989959.434 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-10-08T09:12:39.434Z,1538989959.434 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:12:39.436Z,1538989959.436 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:12:39.436Z,1538989959.436 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-10-08T09:12:39.436Z,1538989959.436 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:12:39.458Z,1538989959.458 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:12:39.458Z,1538989959.458 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:12:39.849Z,1538989959.849 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:12:39.849Z,1538989959.849 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-10-08T09:12:39.850Z,1538989959.850 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:12:39.850Z,1538989959.850 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-10-08T09:12:40.251Z,1538989960.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:12:40.251Z,1538989960.251 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:12:40.252Z,1538989960.252 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:12:40.252Z,1538989960.252 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:12:40.253Z,1538989960.253 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:12:40.257Z,1538989960.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:14:51.044Z,1538990091.044 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T09:14:51.049Z,1538990091.049 [Default:CheckIn:C.Wait] Stopped 2018-10-08T09:14:51.049Z,1538990091.049 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T09:14:51.049Z,1538990091.049 [Default:CheckIn:D] Running Loop=1 2018-10-08T09:14:51.421Z,1538990091.421 [Default:CheckIn:D] Stopped 2018-10-08T09:14:51.421Z,1538990091.421 [Default:CheckIn:E] Running Loop=1 2018-10-08T09:14:51.849Z,1538990091.849 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 93.735872 min 2018-10-08T09:14:51.849Z,1538990091.849 [Default:CheckIn:E] Stopped 2018-10-08T09:14:51.849Z,1538990091.849 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T09:14:51.849Z,1538990091.849 [Default:CheckIn] Stopped 2018-10-08T09:14:51.849Z,1538990091.849 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T09:14:51.850Z,1538990091.850 [Default:CheckIn](INFO): Running loop #10 2018-10-08T09:14:51.850Z,1538990091.850 [Default:CheckIn] Running Loop=10 2018-10-08T09:14:51.850Z,1538990091.850 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T09:14:51.850Z,1538990091.850 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T09:15:40.342Z,1538990140.342 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:15:40.342Z,1538990140.342 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-10-08T09:15:40.343Z,1538990140.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:15:40.344Z,1538990140.344 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:15:40.344Z,1538990140.344 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-10-08T09:15:40.345Z,1538990140.345 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:15:40.374Z,1538990140.374 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:15:40.375Z,1538990140.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:15:40.770Z,1538990140.770 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:15:40.770Z,1538990140.770 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-10-08T09:15:40.771Z,1538990140.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:15:40.771Z,1538990140.771 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-10-08T09:15:41.157Z,1538990141.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:15:41.158Z,1538990141.158 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:15:41.158Z,1538990141.158 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:15:41.159Z,1538990141.159 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:15:41.159Z,1538990141.159 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:15:41.159Z,1538990141.159 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:18:43.652Z,1538990323.652 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:18:43.652Z,1538990323.652 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-10-08T09:18:43.652Z,1538990323.652 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:18:43.654Z,1538990323.654 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:18:43.654Z,1538990323.654 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-10-08T09:18:43.654Z,1538990323.654 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:18:43.668Z,1538990323.668 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:18:43.668Z,1538990323.668 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:18:43.819Z,1538990323.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:18:43.819Z,1538990323.819 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-10-08T09:18:43.820Z,1538990323.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:18:43.820Z,1538990323.820 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-10-08T09:18:44.134Z,1538990324.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:18:44.134Z,1538990324.134 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:18:44.135Z,1538990324.135 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:18:44.135Z,1538990324.135 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:18:44.136Z,1538990324.136 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:18:44.136Z,1538990324.136 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:19:54.237Z,1538990394.237 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T09:14:51.8Z 2018-10-08T09:19:54.265Z,1538990394.265 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T09:19:54.265Z,1538990394.265 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T09:19:59.232Z,1538990399.232 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0027.lzma 2018-10-08T09:20:00.012Z,1538990400.012 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0027.lzma.bak 2018-10-08T09:20:00.012Z,1538990400.012 [DataOverHttps](INFO): SBD MOMSN=8613713 2018-10-08T09:20:09.354Z,1538990409.354 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0028.lzma 2018-10-08T09:20:10.140Z,1538990410.140 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0028.lzma.bak 2018-10-08T09:20:10.140Z,1538990410.140 [DataOverHttps](INFO): SBD MOMSN=8613715 2018-10-08T09:20:11.214Z,1538990411.214 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T09:20:11.214Z,1538990411.214 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T09:20:11.214Z,1538990411.214 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T09:21:19.667Z,1538990479.667 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T09:21:19.667Z,1538990479.667 [NAL9602] Data Fault, FailCount= 5 2018-10-08T09:21:19.667Z,1538990479.667 [NAL9602](ERROR): Data Fault 2018-10-08T09:21:19.748Z,1538990479.748 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T09:21:19.757Z,1538990479.757 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-10-08T09:21:20.067Z,1538990480.067 [NAL9602](INFO): Powering down 2018-10-08T09:21:20.177Z,1538990480.177 [CBIT](INFO): Critical error at 20181008T092119 2018-10-08T09:21:44.165Z,1538990504.165 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:21:44.165Z,1538990504.165 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-10-08T09:21:44.165Z,1538990504.165 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:21:44.167Z,1538990504.167 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:21:44.167Z,1538990504.167 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-10-08T09:21:44.167Z,1538990504.167 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:21:44.189Z,1538990504.189 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:21:44.189Z,1538990504.189 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:21:44.610Z,1538990504.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:21:44.610Z,1538990504.610 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-10-08T09:21:44.611Z,1538990504.611 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:21:44.611Z,1538990504.611 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-10-08T09:21:44.978Z,1538990504.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:21:44.978Z,1538990504.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:21:44.978Z,1538990504.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:21:44.979Z,1538990504.979 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:21:44.979Z,1538990504.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:21:44.980Z,1538990504.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:23:19.694Z,1538990599.694 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T09:23:19.695Z,1538990599.695 [NAL9602] No Fault, FailCount= 5 2018-10-08T09:23:20.039Z,1538990600.039 [NAL9602](INFO): Powering up NAL9602 2018-10-08T09:23:31.235Z,1538990611.235 [NAL9602](INFO): NAL9602 initialized 2018-10-08T09:24:45.061Z,1538990685.061 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:24:45.061Z,1538990685.061 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-10-08T09:24:45.061Z,1538990685.061 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:24:45.063Z,1538990685.063 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:24:45.063Z,1538990685.063 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-10-08T09:24:45.063Z,1538990685.063 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:24:45.077Z,1538990685.077 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:24:45.077Z,1538990685.077 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:24:45.494Z,1538990685.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:24:45.494Z,1538990685.494 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-10-08T09:24:45.495Z,1538990685.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:24:45.495Z,1538990685.495 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-10-08T09:24:45.856Z,1538990685.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:24:45.857Z,1538990685.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:24:45.858Z,1538990685.858 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:24:45.858Z,1538990685.858 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:24:45.858Z,1538990685.858 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:24:45.859Z,1538990685.859 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:25:11.586Z,1538990711.586 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T09:25:11.587Z,1538990711.587 [Default:CheckIn:C.Wait] Stopped 2018-10-08T09:25:11.587Z,1538990711.587 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T09:25:11.587Z,1538990711.587 [Default:CheckIn:D] Running Loop=1 2018-10-08T09:25:11.973Z,1538990711.973 [Default:CheckIn:D] Stopped 2018-10-08T09:25:11.973Z,1538990711.973 [Default:CheckIn:E] Running Loop=1 2018-10-08T09:25:12.370Z,1538990712.370 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 104.078337 min 2018-10-08T09:25:12.370Z,1538990712.370 [Default:CheckIn:E] Stopped 2018-10-08T09:25:12.370Z,1538990712.370 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T09:25:12.370Z,1538990712.370 [Default:CheckIn] Stopped 2018-10-08T09:25:12.370Z,1538990712.370 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T09:25:12.371Z,1538990712.371 [Default:CheckIn](INFO): Running loop #11 2018-10-08T09:25:12.371Z,1538990712.371 [Default:CheckIn] Running Loop=11 2018-10-08T09:25:12.371Z,1538990712.371 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T09:25:12.371Z,1538990712.371 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T09:27:46.127Z,1538990866.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:27:46.127Z,1538990866.127 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-10-08T09:27:46.127Z,1538990866.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:27:46.145Z,1538990866.145 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:27:46.145Z,1538990866.145 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-10-08T09:27:46.146Z,1538990866.146 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:27:46.177Z,1538990866.177 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:27:46.178Z,1538990866.178 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:27:46.562Z,1538990866.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:27:46.562Z,1538990866.562 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-10-08T09:27:46.563Z,1538990866.563 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:27:46.563Z,1538990866.563 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-10-08T09:27:46.932Z,1538990866.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:27:46.933Z,1538990866.933 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:27:46.933Z,1538990866.933 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:27:46.934Z,1538990866.934 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:27:46.934Z,1538990866.934 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:27:46.934Z,1538990866.934 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:28:30.023Z,1538990910.023 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T09:30:14.670Z,1538991014.670 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T09:25:12.4Z 2018-10-08T09:30:14.670Z,1538991014.670 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T09:30:14.670Z,1538991014.670 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T09:30:19.689Z,1538991019.689 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181008T074106/Courier0030.lzma 2018-10-08T09:30:20.463Z,1538991020.463 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0030.lzma.bak 2018-10-08T09:30:20.464Z,1538991020.464 [DataOverHttps](INFO): SBD MOMSN=8613721 2018-10-08T09:30:24.855Z,1538991024.855 [RDI_Pathfinder](ERROR): Failed to parse: :BD, +0.00, +0.00, +0.00, 0.00,16898.32 2018-10-08T09:30:29.933Z,1538991029.933 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0031.lzma 2018-10-08T09:30:30.712Z,1538991030.712 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0031.lzma.bak 2018-10-08T09:30:30.712Z,1538991030.712 [DataOverHttps](INFO): SBD MOMSN=8613723 2018-10-08T09:30:31.799Z,1538991031.799 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T09:30:31.799Z,1538991031.799 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T09:30:31.799Z,1538991031.799 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T09:30:38.023Z,1538991038.023 [BPC1](ERROR): BPC1A: No match for stick with serial number:FFFF in the onboard configuration file. 2018-10-08T09:30:47.223Z,1538991047.223 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:30:47.223Z,1538991047.223 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-10-08T09:30:47.223Z,1538991047.223 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:30:47.225Z,1538991047.225 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:30:47.225Z,1538991047.225 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-10-08T09:30:47.225Z,1538991047.225 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:30:47.247Z,1538991047.247 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:30:47.247Z,1538991047.247 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:30:47.669Z,1538991047.669 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:30:47.669Z,1538991047.669 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-10-08T09:30:47.670Z,1538991047.670 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:30:47.670Z,1538991047.670 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-10-08T09:30:48.024Z,1538991048.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:30:48.025Z,1538991048.025 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:30:48.025Z,1538991048.025 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:30:48.026Z,1538991048.026 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:30:48.026Z,1538991048.026 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:30:48.026Z,1538991048.026 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:32:11.615Z,1538991131.615 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-10-08T09:33:33.451Z,1538991213.451 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T09:33:33.451Z,1538991213.451 [NAL9602] Data Fault, FailCount= 1 2018-10-08T09:33:33.451Z,1538991213.451 [NAL9602](ERROR): Data Fault 2018-10-08T09:33:33.554Z,1538991213.554 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T09:33:33.847Z,1538991213.847 [NAL9602](INFO): Powering down 2018-10-08T09:33:34.734Z,1538991214.734 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T09:33:34.735Z,1538991214.735 [NAL9602] No Fault, FailCount= 1 2018-10-08T09:33:48.288Z,1538991228.288 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:33:48.288Z,1538991228.288 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-10-08T09:33:48.288Z,1538991228.288 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:33:48.290Z,1538991228.290 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:33:48.290Z,1538991228.290 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-10-08T09:33:48.290Z,1538991228.290 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:33:48.304Z,1538991228.304 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:33:48.304Z,1538991228.304 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:33:48.732Z,1538991228.732 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:33:48.732Z,1538991228.732 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-10-08T09:33:48.737Z,1538991228.737 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:33:48.737Z,1538991228.737 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-10-08T09:33:49.106Z,1538991229.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:33:49.107Z,1538991229.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:33:49.107Z,1538991229.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:33:49.107Z,1538991229.107 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:33:49.108Z,1538991229.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:33:49.108Z,1538991229.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:34:06.616Z,1538991246.616 [NAL9602](INFO): Powering up NAL9602 2018-10-08T09:34:17.531Z,1538991257.531 [NAL9602](INFO): NAL9602 initialized 2018-10-08T09:35:32.160Z,1538991332.160 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T09:35:32.160Z,1538991332.160 [Default:CheckIn:C.Wait] Stopped 2018-10-08T09:35:32.160Z,1538991332.160 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T09:35:32.160Z,1538991332.160 [Default:CheckIn:D] Running Loop=1 2018-10-08T09:35:32.586Z,1538991332.586 [Default:CheckIn:D] Stopped 2018-10-08T09:35:32.587Z,1538991332.587 [Default:CheckIn:E] Running Loop=1 2018-10-08T09:35:32.965Z,1538991332.965 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 114.421965 min 2018-10-08T09:35:32.966Z,1538991332.966 [Default:CheckIn:E] Stopped 2018-10-08T09:35:32.966Z,1538991332.966 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T09:35:32.966Z,1538991332.966 [Default:CheckIn] Stopped 2018-10-08T09:35:32.966Z,1538991332.966 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T09:35:32.966Z,1538991332.966 [Default:CheckIn](INFO): Running loop #12 2018-10-08T09:35:32.966Z,1538991332.966 [Default:CheckIn] Running Loop=12 2018-10-08T09:35:32.967Z,1538991332.967 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T09:35:32.967Z,1538991332.967 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T09:36:49.271Z,1538991409.271 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:36:49.271Z,1538991409.271 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-10-08T09:36:49.271Z,1538991409.271 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:36:49.277Z,1538991409.277 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:36:49.277Z,1538991409.277 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-10-08T09:36:49.277Z,1538991409.277 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:36:49.299Z,1538991409.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:36:49.299Z,1538991409.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:36:49.726Z,1538991409.726 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:36:49.726Z,1538991409.726 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-10-08T09:36:49.727Z,1538991409.727 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:36:49.727Z,1538991409.727 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-10-08T09:36:50.102Z,1538991410.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:36:50.102Z,1538991410.102 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:36:50.103Z,1538991410.103 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:36:50.103Z,1538991410.103 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:36:50.103Z,1538991410.103 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:36:50.104Z,1538991410.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:38:14.836Z,1538991494.836 [RDI_Pathfinder](ERROR): Failed to parse: :HM,G,D,0e8c,0ffd, 15.900, -0.008, 0.000 2018-10-08T09:39:50.257Z,1538991590.257 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:39:50.257Z,1538991590.257 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-10-08T09:39:50.257Z,1538991590.257 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:39:50.259Z,1538991590.259 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:39:50.259Z,1538991590.259 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-10-08T09:39:50.259Z,1538991590.259 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:39:50.285Z,1538991590.285 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:39:50.289Z,1538991590.289 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:39:50.639Z,1538991590.639 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:39:50.639Z,1538991590.639 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-10-08T09:39:50.640Z,1538991590.640 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:39:50.640Z,1538991590.640 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-10-08T09:39:51.028Z,1538991591.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:39:51.033Z,1538991591.033 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:39:51.033Z,1538991591.033 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:39:51.034Z,1538991591.034 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:39:51.034Z,1538991591.034 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:39:51.035Z,1538991591.035 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:40:34.678Z,1538991634.678 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T09:35:32.0Z 2018-10-08T09:40:34.678Z,1538991634.678 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T09:40:34.678Z,1538991634.678 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T09:40:39.597Z,1538991639.597 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181008T074106/Courier0033.lzma 2018-10-08T09:40:40.372Z,1538991640.372 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0033.lzma.bak 2018-10-08T09:40:40.372Z,1538991640.372 [DataOverHttps](INFO): SBD MOMSN=8613729 2018-10-08T09:40:49.681Z,1538991649.681 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0034.lzma 2018-10-08T09:40:50.464Z,1538991650.464 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0034.lzma.bak 2018-10-08T09:40:50.464Z,1538991650.464 [DataOverHttps](INFO): SBD MOMSN=8613731 2018-10-08T09:40:51.567Z,1538991651.567 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T09:40:51.567Z,1538991651.567 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T09:40:51.567Z,1538991651.567 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T09:40:54.823Z,1538991654.823 [RDI_Pathfinder](ERROR): Failed to parse: :HM,G,D,0e8c,0ffd, 15.867, -0.001, 0.000 2018-10-08T09:41:36.952Z,1538991696.952 [RDI_Pathfinder](ERROR): Failed to parse: :HM,G,D,0e8c,0ffe, 15.880, -0.002, 0.000 2018-10-08T09:42:51.274Z,1538991771.274 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:42:51.274Z,1538991771.274 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-10-08T09:42:51.275Z,1538991771.275 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:42:51.276Z,1538991771.276 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:42:51.276Z,1538991771.276 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-10-08T09:42:51.277Z,1538991771.277 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:42:51.302Z,1538991771.302 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:42:51.302Z,1538991771.302 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:42:51.689Z,1538991771.689 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:42:51.693Z,1538991771.693 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-10-08T09:42:51.693Z,1538991771.693 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:42:51.693Z,1538991771.693 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-10-08T09:42:52.050Z,1538991772.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:42:52.050Z,1538991772.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:42:52.051Z,1538991772.051 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:42:52.051Z,1538991772.051 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:42:52.051Z,1538991772.051 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:42:52.052Z,1538991772.052 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:44:20.619Z,1538991860.619 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T09:44:20.619Z,1538991860.619 [NAL9602] Data Fault, FailCount= 2 2018-10-08T09:44:20.619Z,1538991860.619 [NAL9602](ERROR): Data Fault 2018-10-08T09:44:20.693Z,1538991860.693 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T09:44:21.019Z,1538991861.019 [NAL9602](INFO): Powering down 2018-10-08T09:44:21.899Z,1538991861.899 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T09:44:21.899Z,1538991861.899 [NAL9602] No Fault, FailCount= 2 2018-10-08T09:44:51.083Z,1538991891.083 [NAL9602](INFO): Powering up NAL9602 2018-10-08T09:45:02.763Z,1538991902.763 [NAL9602](INFO): NAL9602 initialized 2018-10-08T09:45:38.870Z,1538991938.870 [RDI_Pathfinder](ERROR): Failed to parse: :BE,-32768,-32768,-32768,V 2018-10-08T09:45:51.720Z,1538991951.720 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T09:45:51.720Z,1538991951.720 [Default:CheckIn:C.Wait] Stopped 2018-10-08T09:45:51.721Z,1538991951.721 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T09:45:51.721Z,1538991951.721 [Default:CheckIn:D] Running Loop=1 2018-10-08T09:45:52.082Z,1538991952.082 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:45:52.082Z,1538991952.082 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-10-08T09:45:52.082Z,1538991952.082 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:45:52.084Z,1538991952.084 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:45:52.084Z,1538991952.084 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-10-08T09:45:52.084Z,1538991952.084 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:45:52.095Z,1538991952.095 [Default:CheckIn:D] Stopped 2018-10-08T09:45:52.095Z,1538991952.095 [Default:CheckIn:E] Running Loop=1 2018-10-08T09:45:52.114Z,1538991952.114 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:45:52.115Z,1538991952.115 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:45:52.498Z,1538991952.498 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 124.747095 min 2018-10-08T09:45:52.498Z,1538991952.498 [Default:CheckIn:E] Stopped 2018-10-08T09:45:52.499Z,1538991952.499 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T09:45:52.499Z,1538991952.499 [Default:CheckIn] Stopped 2018-10-08T09:45:52.499Z,1538991952.499 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T09:45:52.500Z,1538991952.500 [Default:CheckIn](INFO): Running loop #13 2018-10-08T09:45:52.500Z,1538991952.500 [Default:CheckIn] Running Loop=13 2018-10-08T09:45:52.500Z,1538991952.500 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T09:45:52.500Z,1538991952.500 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T09:45:52.541Z,1538991952.541 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:45:52.541Z,1538991952.541 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-10-08T09:45:52.542Z,1538991952.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:45:52.542Z,1538991952.542 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-10-08T09:45:52.921Z,1538991952.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:45:52.922Z,1538991952.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:45:52.922Z,1538991952.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:45:52.922Z,1538991952.922 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:45:52.923Z,1538991952.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:45:52.923Z,1538991952.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:48:52.983Z,1538992132.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:48:52.983Z,1538992132.983 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-10-08T09:48:52.983Z,1538992132.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:48:52.989Z,1538992132.989 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:48:52.989Z,1538992132.989 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-10-08T09:48:52.989Z,1538992132.989 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:48:53.015Z,1538992133.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:48:53.015Z,1538992133.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:48:53.399Z,1538992133.399 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:48:53.399Z,1538992133.399 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-10-08T09:48:53.400Z,1538992133.400 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:48:53.400Z,1538992133.400 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-10-08T09:48:53.794Z,1538992133.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:48:53.795Z,1538992133.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:48:53.795Z,1538992133.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:48:53.795Z,1538992133.795 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:48:53.796Z,1538992133.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:48:53.796Z,1538992133.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:49:09.897Z,1538992149.897 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude 2018-10-08T09:49:09.897Z,1538992149.897 [RDI_Pathfinder](ERROR): Failed to parse: :BD, +0.00, +0.00, 024.12 2018-10-08T09:50:55.255Z,1538992255.255 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T09:45:52.5Z 2018-10-08T09:50:55.256Z,1538992255.256 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T09:50:55.256Z,1538992255.256 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T09:51:00.201Z,1538992260.201 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0036.lzma 2018-10-08T09:51:00.968Z,1538992260.968 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0036.lzma.bak 2018-10-08T09:51:00.968Z,1538992260.968 [DataOverHttps](INFO): SBD MOMSN=8613737 2018-10-08T09:51:10.317Z,1538992270.317 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0037.lzma 2018-10-08T09:51:11.096Z,1538992271.096 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0037.lzma.bak 2018-10-08T09:51:11.096Z,1538992271.096 [DataOverHttps](INFO): SBD MOMSN=8613739 2018-10-08T09:51:12.189Z,1538992272.189 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T09:51:12.190Z,1538992272.190 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T09:51:12.190Z,1538992272.190 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T09:51:54.025Z,1538992314.025 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:51:54.025Z,1538992314.025 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-10-08T09:51:54.025Z,1538992314.025 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:51:54.027Z,1538992314.027 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:51:54.027Z,1538992314.027 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-10-08T09:51:54.027Z,1538992314.027 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:51:54.065Z,1538992314.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:51:54.065Z,1538992314.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:51:54.454Z,1538992314.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:51:54.454Z,1538992314.454 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-10-08T09:51:54.454Z,1538992314.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:51:54.454Z,1538992314.454 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-10-08T09:51:54.853Z,1538992314.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:51:54.854Z,1538992314.854 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:51:54.854Z,1538992314.854 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:51:54.855Z,1538992314.855 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:51:54.855Z,1538992314.855 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:51:54.856Z,1538992314.856 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:53:41.941Z,1538992421.941 [RDI_Pathfinder](ERROR): only read 2 of 5 data items 2018-10-08T09:53:41.941Z,1538992421.941 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768-32768,V 2018-10-08T09:54:54.885Z,1538992494.885 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:54:54.885Z,1538992494.885 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-10-08T09:54:54.885Z,1538992494.885 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:54:54.887Z,1538992494.887 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:54:54.887Z,1538992494.887 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-10-08T09:54:54.887Z,1538992494.887 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:54:54.900Z,1538992494.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:54:54.901Z,1538992494.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:54:55.284Z,1538992495.284 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:54:55.284Z,1538992495.284 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-10-08T09:54:55.285Z,1538992495.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:54:55.285Z,1538992495.285 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-10-08T09:54:55.688Z,1538992495.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:54:55.688Z,1538992495.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:54:55.688Z,1538992495.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:54:55.697Z,1538992495.697 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:54:55.697Z,1538992495.697 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:54:55.698Z,1538992495.698 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:55:04.851Z,1538992504.851 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T09:55:04.851Z,1538992504.851 [NAL9602] Data Fault, FailCount= 3 2018-10-08T09:55:04.852Z,1538992504.852 [NAL9602](ERROR): Data Fault 2018-10-08T09:55:04.924Z,1538992504.924 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T09:55:05.239Z,1538992505.239 [NAL9602](INFO): Powering down 2018-10-08T09:55:06.091Z,1538992506.091 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T09:55:06.091Z,1538992506.091 [NAL9602] No Fault, FailCount= 3 2018-10-08T09:55:35.319Z,1538992535.319 [NAL9602](INFO): Powering up NAL9602 2018-10-08T09:55:36.547Z,1538992536.547 [RDI_Pathfinder](ERROR): only read 3 of 5 data items 2018-10-08T09:55:36.547Z,1538992536.547 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-3276,-32768,-32768,V 2018-10-08T09:55:46.521Z,1538992546.521 [NAL9602](INFO): NAL9602 initialized 2018-10-08T09:56:12.660Z,1538992572.660 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T09:56:12.660Z,1538992572.660 [Default:CheckIn:C.Wait] Stopped 2018-10-08T09:56:12.660Z,1538992572.660 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T09:56:12.660Z,1538992572.660 [Default:CheckIn:D] Running Loop=1 2018-10-08T09:56:13.046Z,1538992573.046 [Default:CheckIn:D] Stopped 2018-10-08T09:56:13.046Z,1538992573.046 [Default:CheckIn:E] Running Loop=1 2018-10-08T09:56:13.440Z,1538992573.440 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 135.096281 min 2018-10-08T09:56:13.441Z,1538992573.441 [Default:CheckIn:E] Stopped 2018-10-08T09:56:13.442Z,1538992573.442 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T09:56:13.442Z,1538992573.442 [Default:CheckIn] Stopped 2018-10-08T09:56:13.442Z,1538992573.442 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T09:56:13.442Z,1538992573.442 [Default:CheckIn](INFO): Running loop #14 2018-10-08T09:56:13.442Z,1538992573.442 [Default:CheckIn] Running Loop=14 2018-10-08T09:56:13.442Z,1538992573.442 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T09:56:13.442Z,1538992573.442 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T09:57:55.813Z,1538992675.813 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:57:55.813Z,1538992675.813 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-10-08T09:57:55.813Z,1538992675.813 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T09:57:55.815Z,1538992675.815 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T09:57:55.815Z,1538992675.815 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-10-08T09:57:55.815Z,1538992675.815 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T09:57:55.836Z,1538992675.836 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T09:57:55.841Z,1538992675.841 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T09:57:56.218Z,1538992676.218 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T09:57:56.219Z,1538992676.219 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-10-08T09:57:56.219Z,1538992676.219 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T09:57:56.219Z,1538992676.219 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-10-08T09:57:56.595Z,1538992676.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T09:57:56.595Z,1538992676.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:57:56.595Z,1538992676.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T09:57:56.596Z,1538992676.596 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T09:57:56.596Z,1538992676.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T09:57:56.601Z,1538992676.601 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:00:56.646Z,1538992856.646 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:00:56.647Z,1538992856.647 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-10-08T10:00:56.647Z,1538992856.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:00:56.648Z,1538992856.648 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:00:56.649Z,1538992856.649 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-10-08T10:00:56.649Z,1538992856.649 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:00:56.662Z,1538992856.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:00:56.662Z,1538992856.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:00:57.071Z,1538992857.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:00:57.071Z,1538992857.071 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-10-08T10:00:57.071Z,1538992857.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:00:57.071Z,1538992857.071 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-10-08T10:00:57.450Z,1538992857.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:00:57.451Z,1538992857.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:00:57.451Z,1538992857.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:00:57.451Z,1538992857.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:00:57.452Z,1538992857.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:00:57.452Z,1538992857.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:01:19.170Z,1538992879.170 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T09:56:13.4Z 2018-10-08T10:01:19.170Z,1538992879.170 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T10:01:19.171Z,1538992879.171 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T10:01:24.347Z,1538992884.347 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0039.lzma 2018-10-08T10:01:25.112Z,1538992885.112 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0039.lzma.bak 2018-10-08T10:01:25.112Z,1538992885.112 [DataOverHttps](INFO): SBD MOMSN=8613745 2018-10-08T10:01:38.114Z,1538992898.114 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0040.lzma 2018-10-08T10:01:38.884Z,1538992898.884 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0040.lzma.bak 2018-10-08T10:01:38.884Z,1538992898.884 [DataOverHttps](INFO): SBD MOMSN=8613747 2018-10-08T10:01:39.956Z,1538992899.956 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T10:01:39.956Z,1538992899.956 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T10:01:39.956Z,1538992899.956 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T10:03:57.629Z,1538993037.629 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:03:57.630Z,1538993037.630 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-10-08T10:03:57.630Z,1538993037.630 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:03:57.631Z,1538993037.631 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:03:57.632Z,1538993037.632 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-10-08T10:03:57.632Z,1538993037.632 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:03:57.645Z,1538993037.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:03:57.646Z,1538993037.646 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:03:58.022Z,1538993038.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:03:58.022Z,1538993038.022 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-10-08T10:03:58.023Z,1538993038.023 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:03:58.023Z,1538993038.023 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-10-08T10:03:58.406Z,1538993038.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:03:58.407Z,1538993038.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:03:58.407Z,1538993038.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:03:58.408Z,1538993038.408 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:03:58.408Z,1538993038.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:03:58.408Z,1538993038.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:05:51.435Z,1538993151.435 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T10:05:51.435Z,1538993151.435 [NAL9602] Data Fault, FailCount= 4 2018-10-08T10:05:51.435Z,1538993151.435 [NAL9602](ERROR): Data Fault 2018-10-08T10:05:51.520Z,1538993151.520 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T10:05:51.835Z,1538993151.835 [NAL9602](INFO): Powering down 2018-10-08T10:05:52.711Z,1538993152.711 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T10:05:52.711Z,1538993152.711 [NAL9602] No Fault, FailCount= 4 2018-10-08T10:06:21.847Z,1538993181.847 [NAL9602](INFO): Powering up NAL9602 2018-10-08T10:06:32.959Z,1538993192.959 [NAL9602](INFO): NAL9602 initialized 2018-10-08T10:06:40.211Z,1538993200.211 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T10:06:40.211Z,1538993200.211 [Default:CheckIn:C.Wait] Stopped 2018-10-08T10:06:40.211Z,1538993200.211 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T10:06:40.211Z,1538993200.211 [Default:CheckIn:D] Running Loop=1 2018-10-08T10:06:40.604Z,1538993200.604 [Default:CheckIn:D] Stopped 2018-10-08T10:06:40.604Z,1538993200.604 [Default:CheckIn:E] Running Loop=1 2018-10-08T10:06:41.010Z,1538993201.010 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 145.555599 min 2018-10-08T10:06:41.010Z,1538993201.010 [Default:CheckIn:E] Stopped 2018-10-08T10:06:41.010Z,1538993201.010 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T10:06:41.010Z,1538993201.010 [Default:CheckIn] Stopped 2018-10-08T10:06:41.010Z,1538993201.010 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T10:06:41.011Z,1538993201.011 [Default:CheckIn](INFO): Running loop #15 2018-10-08T10:06:41.011Z,1538993201.011 [Default:CheckIn] Running Loop=15 2018-10-08T10:06:41.011Z,1538993201.011 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T10:06:41.011Z,1538993201.011 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T10:07:00.920Z,1538993220.920 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:07:00.920Z,1538993220.920 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-10-08T10:07:00.921Z,1538993220.921 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:07:00.923Z,1538993220.923 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:07:00.923Z,1538993220.923 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-10-08T10:07:00.923Z,1538993220.923 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:07:00.975Z,1538993220.975 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:07:00.976Z,1538993220.976 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:07:01.074Z,1538993221.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:07:01.074Z,1538993221.074 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-10-08T10:07:01.075Z,1538993221.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:07:01.075Z,1538993221.075 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-10-08T10:07:01.442Z,1538993221.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:07:01.442Z,1538993221.442 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:07:01.443Z,1538993221.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:07:01.443Z,1538993221.443 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:07:01.443Z,1538993221.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:07:01.444Z,1538993221.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:07:01.833Z,1538993221.833 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T10:10:01.619Z,1538993401.619 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:10:01.619Z,1538993401.619 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-10-08T10:10:01.619Z,1538993401.619 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:10:01.626Z,1538993401.626 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:10:01.626Z,1538993401.626 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-10-08T10:10:01.627Z,1538993401.627 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:10:01.658Z,1538993401.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:10:01.658Z,1538993401.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:10:02.045Z,1538993402.045 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:10:02.045Z,1538993402.045 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-10-08T10:10:02.046Z,1538993402.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:10:02.046Z,1538993402.046 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-10-08T10:10:02.398Z,1538993402.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:10:02.398Z,1538993402.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:10:02.398Z,1538993402.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:10:02.399Z,1538993402.399 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:10:02.399Z,1538993402.399 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:10:02.400Z,1538993402.400 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:11:43.321Z,1538993503.321 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T10:06:41.0Z 2018-10-08T10:11:43.321Z,1538993503.321 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T10:11:43.321Z,1538993503.321 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T10:11:51.054Z,1538993511.054 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0042.lzma 2018-10-08T10:11:51.996Z,1538993511.996 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0042.lzma.bak 2018-10-08T10:11:51.996Z,1538993511.996 [DataOverHttps](INFO): SBD MOMSN=8613753 2018-10-08T10:12:01.125Z,1538993521.125 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20181008T074106/Express0043.lzma 2018-10-08T10:12:01.896Z,1538993521.896 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0043.lzma.bak 2018-10-08T10:12:01.896Z,1538993521.896 [DataOverHttps](INFO): SBD MOMSN=8613755 2018-10-08T10:12:02.976Z,1538993522.976 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T10:12:02.977Z,1538993522.977 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T10:12:02.977Z,1538993522.977 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T10:13:02.482Z,1538993582.482 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:13:02.482Z,1538993582.482 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-10-08T10:13:02.482Z,1538993582.482 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:13:02.490Z,1538993582.490 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:13:02.491Z,1538993582.491 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-10-08T10:13:02.491Z,1538993582.491 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:13:02.523Z,1538993582.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:13:02.524Z,1538993582.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:13:02.894Z,1538993582.894 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:13:02.894Z,1538993582.894 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-10-08T10:13:02.894Z,1538993582.894 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:13:02.894Z,1538993582.894 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-10-08T10:13:03.241Z,1538993583.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:13:03.242Z,1538993583.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:13:03.242Z,1538993583.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:13:03.243Z,1538993583.243 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:13:03.243Z,1538993583.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:13:03.243Z,1538993583.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:16:03.338Z,1538993763.338 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:16:03.338Z,1538993763.338 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-10-08T10:16:03.338Z,1538993763.338 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:16:03.340Z,1538993763.340 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:16:03.340Z,1538993763.340 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-10-08T10:16:03.341Z,1538993763.341 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:16:03.366Z,1538993763.366 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:16:03.366Z,1538993763.366 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:16:03.767Z,1538993763.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:16:03.767Z,1538993763.767 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-10-08T10:16:03.768Z,1538993763.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:16:03.768Z,1538993763.768 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-10-08T10:16:04.157Z,1538993764.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:16:04.158Z,1538993764.158 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:16:04.158Z,1538993764.158 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:16:04.159Z,1538993764.159 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:16:04.159Z,1538993764.159 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:16:04.159Z,1538993764.159 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:16:33.783Z,1538993793.783 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T10:16:33.783Z,1538993793.783 [NAL9602] Data Fault, FailCount= 5 2018-10-08T10:16:33.783Z,1538993793.783 [NAL9602](ERROR): Data Fault 2018-10-08T10:16:33.895Z,1538993793.895 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T10:16:33.895Z,1538993793.895 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-10-08T10:16:34.183Z,1538993794.183 [NAL9602](INFO): Powering down 2018-10-08T10:16:34.250Z,1538993794.250 [CBIT](INFO): Critical error at 20181008T101633 2018-10-08T10:17:03.108Z,1538993823.108 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T10:17:03.109Z,1538993823.109 [Default:CheckIn:C.Wait] Stopped 2018-10-08T10:17:03.109Z,1538993823.109 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T10:17:03.109Z,1538993823.109 [Default:CheckIn:D] Running Loop=1 2018-10-08T10:17:03.549Z,1538993823.549 [Default:CheckIn:D] Stopped 2018-10-08T10:17:03.549Z,1538993823.549 [Default:CheckIn:E] Running Loop=1 2018-10-08T10:17:03.908Z,1538993823.908 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 155.937939 min 2018-10-08T10:17:03.908Z,1538993823.908 [Default:CheckIn:E] Stopped 2018-10-08T10:17:03.908Z,1538993823.908 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T10:17:03.908Z,1538993823.908 [Default:CheckIn] Stopped 2018-10-08T10:17:03.909Z,1538993823.909 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T10:17:03.909Z,1538993823.909 [Default:CheckIn](INFO): Running loop #16 2018-10-08T10:17:03.909Z,1538993823.909 [Default:CheckIn] Running Loop=16 2018-10-08T10:17:03.909Z,1538993823.909 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T10:17:03.909Z,1538993823.909 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T10:17:19.519Z,1538993839.519 [CBIT](IMPORTANT): Beginning ground fault scan 2018-10-08T10:17:32.581Z,1538993852.581 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.127803 CHAN A1 (24V): 0.003545 CHAN A2 (12V): -0.007335 CHAN A3 (5V): -0.002107 CHAN B0 (3.3V): 0.000402 CHAN B1 (3.15aV): 0.000119 CHAN B2 (3.15bV): 0.000036 CHAN B3 (GND): 0.002289 OPEN: 0.005244 Full Scale Calc: 4.765 mA, -1.589 mA 2018-10-08T10:18:34.625Z,1538993914.625 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T10:18:34.625Z,1538993914.625 [NAL9602] No Fault, FailCount= 5 2018-10-08T10:18:34.664Z,1538993914.664 [NAL9602](INFO): Powering up NAL9602 2018-10-08T10:18:45.847Z,1538993925.847 [NAL9602](INFO): NAL9602 initialized 2018-10-08T10:19:01.883Z,1538993941.883 [RDI_Pathfinder](ERROR): only read 0 of 5 data items 2018-10-08T10:19:01.884Z,1538993941.884 [RDI_Pathfinder](ERROR): Failed to parse: :BI-32768,-32768,-32768,V 2018-10-08T10:19:04.291Z,1538993944.291 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:19:04.292Z,1538993944.292 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-10-08T10:19:04.292Z,1538993944.292 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:19:04.298Z,1538993944.298 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:19:04.298Z,1538993944.298 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-10-08T10:19:04.298Z,1538993944.298 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:19:04.327Z,1538993944.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:19:04.328Z,1538993944.328 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:19:04.748Z,1538993944.748 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:19:04.748Z,1538993944.748 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-10-08T10:19:04.753Z,1538993944.753 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:19:04.753Z,1538993944.753 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-10-08T10:19:05.100Z,1538993945.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:19:05.100Z,1538993945.100 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:19:05.101Z,1538993945.101 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:19:05.101Z,1538993945.101 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:19:05.102Z,1538993945.102 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:19:05.102Z,1538993945.102 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:20:12.498Z,1538994012.498 [RDI_Pathfinder](ERROR): only read 3 of 5 data items 2018-10-08T10:20:12.498Z,1538994012.498 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-3268,-32768,V 2018-10-08T10:22:06.128Z,1538994126.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:22:06.128Z,1538994126.128 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-10-08T10:22:06.128Z,1538994126.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:22:06.132Z,1538994126.132 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:22:06.132Z,1538994126.132 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-10-08T10:22:06.132Z,1538994126.132 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:22:06.135Z,1538994126.135 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T10:17:03.9Z 2018-10-08T10:22:06.135Z,1538994126.135 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T10:22:06.135Z,1538994126.135 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T10:22:06.147Z,1538994126.147 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:22:06.147Z,1538994126.147 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:22:06.279Z,1538994126.279 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:22:06.279Z,1538994126.279 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-10-08T10:22:06.279Z,1538994126.279 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:22:06.280Z,1538994126.280 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-10-08T10:22:06.947Z,1538994126.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:22:06.947Z,1538994126.947 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:22:06.948Z,1538994126.948 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:22:06.948Z,1538994126.948 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:22:06.949Z,1538994126.949 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:22:06.949Z,1538994126.949 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:22:13.517Z,1538994133.517 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181008T074106/Courier0045.lzma 2018-10-08T10:22:13.564Z,1538994133.564 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T10:22:14.045Z,1538994134.045 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0045.lzma.bak 2018-10-08T10:22:14.045Z,1538994134.045 [DataOverHttps](INFO): SBD MOMSN=8613761 2018-10-08T10:22:23.450Z,1538994143.450 [DataOverHttps](INFO): Sending 322 bytes from file Logs/20181008T074106/Express0046.lzma 2018-10-08T10:22:24.208Z,1538994144.208 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0046.lzma.bak 2018-10-08T10:22:24.209Z,1538994144.209 [DataOverHttps](INFO): SBD MOMSN=8613763 2018-10-08T10:22:25.263Z,1538994145.263 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T10:22:25.263Z,1538994145.263 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T10:22:25.263Z,1538994145.263 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T10:25:06.987Z,1538994306.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:25:06.987Z,1538994306.987 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-10-08T10:25:06.987Z,1538994306.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:25:06.989Z,1538994306.989 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:25:06.989Z,1538994306.989 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-10-08T10:25:06.989Z,1538994306.989 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:25:07.002Z,1538994307.002 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:25:07.003Z,1538994307.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:25:07.403Z,1538994307.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:25:07.403Z,1538994307.403 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-10-08T10:25:07.404Z,1538994307.404 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:25:07.404Z,1538994307.404 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-10-08T10:25:07.793Z,1538994307.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:25:07.793Z,1538994307.793 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:25:07.794Z,1538994307.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:25:07.794Z,1538994307.794 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:25:07.794Z,1538994307.794 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:25:07.795Z,1538994307.795 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:27:25.703Z,1538994445.703 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T10:27:25.703Z,1538994445.703 [Default:CheckIn:C.Wait] Stopped 2018-10-08T10:27:25.703Z,1538994445.703 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T10:27:25.703Z,1538994445.703 [Default:CheckIn:D] Running Loop=1 2018-10-08T10:27:26.095Z,1538994446.095 [Default:CheckIn:D] Stopped 2018-10-08T10:27:26.096Z,1538994446.096 [Default:CheckIn:E] Running Loop=1 2018-10-08T10:27:26.533Z,1538994446.533 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 166.313786 min 2018-10-08T10:27:26.533Z,1538994446.533 [Default:CheckIn:E] Stopped 2018-10-08T10:27:26.533Z,1538994446.533 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T10:27:26.533Z,1538994446.533 [Default:CheckIn] Stopped 2018-10-08T10:27:26.533Z,1538994446.533 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T10:27:26.534Z,1538994446.534 [Default:CheckIn](INFO): Running loop #17 2018-10-08T10:27:26.534Z,1538994446.534 [Default:CheckIn] Running Loop=17 2018-10-08T10:27:26.534Z,1538994446.534 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T10:27:26.534Z,1538994446.534 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T10:28:07.848Z,1538994487.848 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:28:07.848Z,1538994487.848 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-10-08T10:28:07.848Z,1538994487.848 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:28:07.850Z,1538994487.850 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:28:07.850Z,1538994487.850 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-10-08T10:28:07.850Z,1538994487.850 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:28:07.868Z,1538994487.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:28:07.868Z,1538994487.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:28:08.259Z,1538994488.259 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:28:08.259Z,1538994488.259 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-10-08T10:28:08.260Z,1538994488.260 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:28:08.260Z,1538994488.260 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-10-08T10:28:08.652Z,1538994488.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:28:08.653Z,1538994488.653 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:28:08.657Z,1538994488.657 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:28:08.658Z,1538994488.658 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:28:08.658Z,1538994488.658 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:28:08.658Z,1538994488.658 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:28:46.768Z,1538994526.768 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T10:28:46.768Z,1538994526.768 [NAL9602] Data Fault, FailCount= 1 2018-10-08T10:28:46.768Z,1538994526.768 [NAL9602](ERROR): Data Fault 2018-10-08T10:28:46.840Z,1538994526.840 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T10:28:47.167Z,1538994527.167 [NAL9602](INFO): Powering down 2018-10-08T10:28:48.007Z,1538994528.007 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T10:28:48.007Z,1538994528.007 [NAL9602] No Fault, FailCount= 1 2018-10-08T10:29:17.231Z,1538994557.231 [NAL9602](INFO): Powering up NAL9602 2018-10-08T10:29:28.431Z,1538994568.431 [NAL9602](INFO): NAL9602 initialized 2018-10-08T10:29:40.214Z,1538994580.214 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error 2018-10-08T10:29:40.215Z,1538994580.215 [RDI_Pathfinder](ERROR): Failed to parse: :TS,18100803344351,35.0, -0.1, 0.0,1448:BI,-32768,-32768,-32768,-32768,V 2018-10-08T10:31:08.800Z,1538994668.800 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:31:08.800Z,1538994668.800 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-10-08T10:31:08.800Z,1538994668.800 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:31:08.806Z,1538994668.806 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:31:08.806Z,1538994668.806 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-10-08T10:31:08.806Z,1538994668.806 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:31:08.832Z,1538994668.832 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:31:08.832Z,1538994668.832 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:31:09.224Z,1538994669.224 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:31:09.224Z,1538994669.224 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-10-08T10:31:09.225Z,1538994669.225 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:31:09.225Z,1538994669.225 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-10-08T10:31:09.605Z,1538994669.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:31:09.606Z,1538994669.606 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:31:09.606Z,1538994669.606 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:31:09.607Z,1538994669.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:31:09.607Z,1538994669.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:31:09.608Z,1538994669.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:31:21.865Z,1538994681.865 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error 2018-10-08T10:31:21.866Z,1538994681.866 [RDI_Pathfinder](ERROR): Failed to parse: :TS,18100803362551,35.0, -0.1, 0.0,1448.BI,-32768,-32768,-32768,-32768,V 2018-10-08T10:32:28.829Z,1538994748.829 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T10:27:26.5Z 2018-10-08T10:32:28.829Z,1538994748.829 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T10:32:28.829Z,1538994748.829 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T10:32:33.760Z,1538994753.760 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0048.lzma 2018-10-08T10:32:34.540Z,1538994754.540 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0048.lzma.bak 2018-10-08T10:32:34.540Z,1538994754.540 [DataOverHttps](INFO): SBD MOMSN=8613769 2018-10-08T10:32:43.864Z,1538994763.864 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T074106/Express0049.lzma 2018-10-08T10:32:47.554Z,1538994767.554 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0049.lzma.bak 2018-10-08T10:32:47.554Z,1538994767.554 [DataOverHttps](INFO): SBD MOMSN=8613771 2018-10-08T10:32:48.384Z,1538994768.384 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T10:32:48.385Z,1538994768.385 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T10:32:48.385Z,1538994768.385 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T10:34:09.763Z,1538994849.763 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:34:09.764Z,1538994849.764 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-10-08T10:34:09.764Z,1538994849.764 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:34:09.770Z,1538994849.770 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:34:09.770Z,1538994849.770 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-10-08T10:34:09.770Z,1538994849.770 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:34:09.820Z,1538994849.820 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:34:09.821Z,1538994849.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:34:10.206Z,1538994850.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:34:10.206Z,1538994850.206 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-10-08T10:34:10.207Z,1538994850.207 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:34:10.207Z,1538994850.207 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-10-08T10:34:10.574Z,1538994850.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:34:10.574Z,1538994850.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:34:10.575Z,1538994850.575 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:34:10.575Z,1538994850.575 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:34:10.575Z,1538994850.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:34:10.576Z,1538994850.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:34:42.673Z,1538994882.673 [BPC1](ERROR): BPC1B: No match for stick with serial number:1717 in the onboard configuration file. 2018-10-08T10:37:10.671Z,1538995030.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:37:10.672Z,1538995030.672 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-10-08T10:37:10.672Z,1538995030.672 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:37:10.678Z,1538995030.678 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:37:10.678Z,1538995030.678 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-10-08T10:37:10.678Z,1538995030.678 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:37:10.703Z,1538995030.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:37:10.704Z,1538995030.704 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:37:11.117Z,1538995031.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:37:11.117Z,1538995031.117 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-10-08T10:37:11.118Z,1538995031.118 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:37:11.118Z,1538995031.118 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-10-08T10:37:11.581Z,1538995031.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:37:11.582Z,1538995031.582 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:37:11.582Z,1538995031.582 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:37:11.583Z,1538995031.583 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:37:11.583Z,1538995031.583 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:37:11.583Z,1538995031.583 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:37:48.791Z,1538995068.791 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T10:37:48.792Z,1538995068.792 [Default:CheckIn:C.Wait] Stopped 2018-10-08T10:37:48.792Z,1538995068.792 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T10:37:48.792Z,1538995068.792 [Default:CheckIn:D] Running Loop=1 2018-10-08T10:37:49.178Z,1538995069.178 [Default:CheckIn:D] Stopped 2018-10-08T10:37:49.178Z,1538995069.178 [Default:CheckIn:E] Running Loop=1 2018-10-08T10:37:49.583Z,1538995069.583 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 176.698470 min 2018-10-08T10:37:49.584Z,1538995069.584 [Default:CheckIn:E] Stopped 2018-10-08T10:37:49.584Z,1538995069.584 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T10:37:49.584Z,1538995069.584 [Default:CheckIn] Stopped 2018-10-08T10:37:49.584Z,1538995069.584 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T10:37:49.584Z,1538995069.584 [Default:CheckIn](INFO): Running loop #18 2018-10-08T10:37:49.584Z,1538995069.584 [Default:CheckIn] Running Loop=18 2018-10-08T10:37:49.585Z,1538995069.585 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T10:37:49.585Z,1538995069.585 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T10:39:31.435Z,1538995171.435 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T10:39:31.435Z,1538995171.435 [NAL9602] Data Fault, FailCount= 2 2018-10-08T10:39:31.436Z,1538995171.436 [NAL9602](ERROR): Data Fault 2018-10-08T10:39:31.506Z,1538995171.506 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T10:39:31.835Z,1538995171.835 [NAL9602](INFO): Powering down 2018-10-08T10:39:32.700Z,1538995172.700 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T10:39:32.701Z,1538995172.701 [NAL9602] No Fault, FailCount= 2 2018-10-08T10:39:39.071Z,1538995179.071 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-10-08T10:40:01.963Z,1538995201.963 [NAL9602](INFO): Powering up NAL9602 2018-10-08T10:40:11.616Z,1538995211.616 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:40:11.616Z,1538995211.616 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-10-08T10:40:11.616Z,1538995211.616 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:40:11.618Z,1538995211.618 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:40:11.618Z,1538995211.618 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-10-08T10:40:11.618Z,1538995211.618 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:40:11.632Z,1538995211.632 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:40:11.633Z,1538995211.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:40:12.034Z,1538995212.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:40:12.034Z,1538995212.034 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-10-08T10:40:12.034Z,1538995212.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:40:12.035Z,1538995212.035 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-10-08T10:40:12.428Z,1538995212.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:40:12.429Z,1538995212.429 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:40:12.430Z,1538995212.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:40:12.431Z,1538995212.431 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:40:12.432Z,1538995212.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:40:12.434Z,1538995212.434 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:40:12.773Z,1538995212.773 [NAL9602](INFO): NAL9602 initialized 2018-10-08T10:42:51.224Z,1538995371.224 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T10:37:49.6Z 2018-10-08T10:42:51.225Z,1538995371.225 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T10:42:51.225Z,1538995371.225 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T10:42:56.203Z,1538995376.203 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181008T074106/Courier0051.lzma 2018-10-08T10:42:56.984Z,1538995376.984 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0051.lzma.bak 2018-10-08T10:42:56.984Z,1538995376.984 [DataOverHttps](INFO): SBD MOMSN=8613777 2018-10-08T10:43:06.318Z,1538995386.318 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0052.lzma 2018-10-08T10:43:07.076Z,1538995387.076 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0052.lzma.bak 2018-10-08T10:43:07.076Z,1538995387.076 [DataOverHttps](INFO): SBD MOMSN=8613779 2018-10-08T10:43:08.156Z,1538995388.156 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T10:43:08.156Z,1538995388.156 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T10:43:08.156Z,1538995388.156 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T10:43:12.751Z,1538995392.751 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T10:43:12.771Z,1538995392.771 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:43:12.771Z,1538995392.771 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-10-08T10:43:12.771Z,1538995392.771 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:43:12.781Z,1538995392.781 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:43:12.781Z,1538995392.781 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-10-08T10:43:12.781Z,1538995392.781 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:43:12.807Z,1538995392.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:43:12.808Z,1538995392.808 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:43:13.195Z,1538995393.195 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:43:13.195Z,1538995393.195 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-10-08T10:43:13.195Z,1538995393.195 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:43:13.195Z,1538995393.195 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-10-08T10:43:13.577Z,1538995393.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:43:13.577Z,1538995393.577 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:43:13.578Z,1538995393.578 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:43:13.578Z,1538995393.578 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:43:13.579Z,1538995393.579 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:43:13.579Z,1538995393.579 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:46:13.719Z,1538995573.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:46:13.719Z,1538995573.719 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-10-08T10:46:13.719Z,1538995573.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:46:13.725Z,1538995573.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:46:13.725Z,1538995573.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-10-08T10:46:13.725Z,1538995573.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:46:13.746Z,1538995573.746 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:46:13.747Z,1538995573.747 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:46:14.110Z,1538995574.110 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:46:14.110Z,1538995574.110 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-10-08T10:46:14.111Z,1538995574.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:46:14.111Z,1538995574.111 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-10-08T10:46:14.517Z,1538995574.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:46:14.518Z,1538995574.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:46:14.518Z,1538995574.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:46:14.519Z,1538995574.519 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:46:14.519Z,1538995574.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:46:14.519Z,1538995574.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:46:53.821Z,1538995613.821 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error 2018-10-08T10:46:53.821Z,1538995613.821 [RDI_Pathfinder](ERROR): Failed to parse: :TS,18100803515751,35.0, -0.1, 0.0,14 2018-10-08T10:47:19.905Z,1538995639.905 [RDI_Pathfinder](ERROR): Failed to parse: :BE,-32768,-32768,-32768,V 2018-10-08T10:48:08.416Z,1538995688.416 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T10:48:08.421Z,1538995688.421 [Default:CheckIn:C.Wait] Stopped 2018-10-08T10:48:08.421Z,1538995688.421 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T10:48:08.421Z,1538995688.421 [Default:CheckIn:D] Running Loop=1 2018-10-08T10:48:08.814Z,1538995688.814 [Default:CheckIn:D] Stopped 2018-10-08T10:48:08.814Z,1538995688.814 [Default:CheckIn:E] Running Loop=1 2018-10-08T10:48:09.205Z,1538995689.205 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 187.025749 min 2018-10-08T10:48:09.205Z,1538995689.205 [Default:CheckIn:E] Stopped 2018-10-08T10:48:09.205Z,1538995689.205 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T10:48:09.206Z,1538995689.206 [Default:CheckIn] Stopped 2018-10-08T10:48:09.206Z,1538995689.206 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T10:48:09.206Z,1538995689.206 [Default:CheckIn](INFO): Running loop #19 2018-10-08T10:48:09.206Z,1538995689.206 [Default:CheckIn] Running Loop=19 2018-10-08T10:48:09.206Z,1538995689.206 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T10:48:09.206Z,1538995689.206 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T10:49:14.628Z,1538995754.628 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:49:14.628Z,1538995754.628 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-10-08T10:49:14.628Z,1538995754.628 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:49:14.630Z,1538995754.630 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:49:14.630Z,1538995754.630 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-10-08T10:49:14.630Z,1538995754.630 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:49:14.643Z,1538995754.643 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:49:14.644Z,1538995754.644 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:49:15.033Z,1538995755.033 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:49:15.033Z,1538995755.033 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-10-08T10:49:15.034Z,1538995755.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:49:15.034Z,1538995755.034 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-10-08T10:49:15.442Z,1538995755.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:49:15.443Z,1538995755.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:49:15.444Z,1538995755.444 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:49:15.444Z,1538995755.444 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:49:15.449Z,1538995755.449 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:49:15.449Z,1538995755.449 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:49:41.074Z,1538995781.074 [RDI_Pathfinder](ERROR): Failed to parse: 2018-10-08T10:50:16.767Z,1538995816.767 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T10:50:16.767Z,1538995816.767 [NAL9602] Data Fault, FailCount= 3 2018-10-08T10:50:16.767Z,1538995816.767 [NAL9602](ERROR): Data Fault 2018-10-08T10:50:16.858Z,1538995816.858 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T10:50:17.163Z,1538995817.163 [NAL9602](INFO): Powering down 2018-10-08T10:50:18.024Z,1538995818.024 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T10:50:18.024Z,1538995818.024 [NAL9602] No Fault, FailCount= 3 2018-10-08T10:50:47.167Z,1538995847.167 [NAL9602](INFO): Powering up NAL9602 2018-10-08T10:50:58.051Z,1538995858.051 [NAL9602](INFO): NAL9602 initialized 2018-10-08T10:52:15.573Z,1538995935.573 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:52:15.573Z,1538995935.573 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-10-08T10:52:15.573Z,1538995935.573 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:52:15.575Z,1538995935.575 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:52:15.575Z,1538995935.575 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-10-08T10:52:15.575Z,1538995935.575 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:52:15.605Z,1538995935.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:52:15.605Z,1538995935.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:52:15.961Z,1538995935.961 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:52:15.962Z,1538995935.962 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-10-08T10:52:15.962Z,1538995935.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:52:15.962Z,1538995935.962 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-10-08T10:52:16.330Z,1538995936.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:52:16.331Z,1538995936.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:52:16.331Z,1538995936.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:52:16.331Z,1538995936.331 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:52:16.332Z,1538995936.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:52:16.332Z,1538995936.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:53:11.623Z,1538995991.623 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T10:48:09.2Z 2018-10-08T10:53:11.623Z,1538995991.623 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T10:53:11.623Z,1538995991.623 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T10:53:16.616Z,1538995996.616 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0054.lzma 2018-10-08T10:53:17.400Z,1538995997.400 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0054.lzma.bak 2018-10-08T10:53:17.401Z,1538995997.401 [DataOverHttps](INFO): SBD MOMSN=8613785 2018-10-08T10:53:26.710Z,1538996006.710 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T074106/Express0055.lzma 2018-10-08T10:53:27.506Z,1538996007.506 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0055.lzma.bak 2018-10-08T10:53:27.507Z,1538996007.507 [DataOverHttps](INFO): SBD MOMSN=8613787 2018-10-08T10:53:28.816Z,1538996008.816 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T10:53:28.816Z,1538996008.816 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T10:53:28.816Z,1538996008.816 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T10:55:17.976Z,1538996117.976 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:55:17.977Z,1538996117.977 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-10-08T10:55:17.977Z,1538996117.977 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:55:17.979Z,1538996117.979 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:55:17.979Z,1538996117.979 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-10-08T10:55:17.979Z,1538996117.979 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:55:17.992Z,1538996117.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:55:17.992Z,1538996117.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:55:18.142Z,1538996118.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:55:18.142Z,1538996118.142 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-10-08T10:55:18.143Z,1538996118.143 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:55:18.143Z,1538996118.143 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-10-08T10:55:18.474Z,1538996118.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:55:18.474Z,1538996118.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:55:18.475Z,1538996118.475 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:55:18.475Z,1538996118.475 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:55:18.476Z,1538996118.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:55:18.476Z,1538996118.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:58:10.183Z,1538996290.183 [RDI_Pathfinder](ERROR): only read 3 of 5 data items 2018-10-08T10:58:10.183Z,1538996290.183 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-3768,-32768,V 2018-10-08T10:58:18.690Z,1538996298.690 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:58:18.690Z,1538996298.690 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-10-08T10:58:18.690Z,1538996298.690 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T10:58:18.692Z,1538996298.692 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T10:58:18.692Z,1538996298.692 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-10-08T10:58:18.692Z,1538996298.692 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T10:58:18.722Z,1538996298.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T10:58:18.722Z,1538996298.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T10:58:19.104Z,1538996299.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T10:58:19.105Z,1538996299.105 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-10-08T10:58:19.105Z,1538996299.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T10:58:19.105Z,1538996299.105 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-10-08T10:58:19.490Z,1538996299.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T10:58:19.490Z,1538996299.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:58:19.491Z,1538996299.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:58:19.491Z,1538996299.491 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T10:58:19.492Z,1538996299.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T10:58:19.492Z,1538996299.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T10:58:29.076Z,1538996309.076 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T10:58:29.077Z,1538996309.077 [Default:CheckIn:C.Wait] Stopped 2018-10-08T10:58:29.077Z,1538996309.077 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T10:58:29.077Z,1538996309.077 [Default:CheckIn:D] Running Loop=1 2018-10-08T10:58:29.473Z,1538996309.473 [Default:CheckIn:D] Stopped 2018-10-08T10:58:29.473Z,1538996309.473 [Default:CheckIn:E] Running Loop=1 2018-10-08T10:58:29.883Z,1538996309.883 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 197.370085 min 2018-10-08T10:58:29.883Z,1538996309.883 [Default:CheckIn:E] Stopped 2018-10-08T10:58:29.883Z,1538996309.883 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T10:58:29.884Z,1538996309.884 [Default:CheckIn] Stopped 2018-10-08T10:58:29.884Z,1538996309.884 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T10:58:29.884Z,1538996309.884 [Default:CheckIn](INFO): Running loop #20 2018-10-08T10:58:29.884Z,1538996309.884 [Default:CheckIn] Running Loop=20 2018-10-08T10:58:29.884Z,1538996309.884 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T10:58:29.884Z,1538996309.884 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T11:00:59.415Z,1538996459.415 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T11:00:59.415Z,1538996459.415 [NAL9602] Data Fault, FailCount= 4 2018-10-08T11:00:59.415Z,1538996459.415 [NAL9602](ERROR): Data Fault 2018-10-08T11:00:59.487Z,1538996459.487 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T11:00:59.799Z,1538996459.799 [NAL9602](INFO): Powering down 2018-10-08T11:01:00.668Z,1538996460.668 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T11:01:00.668Z,1538996460.668 [NAL9602] No Fault, FailCount= 4 2018-10-08T11:01:19.560Z,1538996479.560 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:01:19.560Z,1538996479.560 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-10-08T11:01:19.560Z,1538996479.560 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:01:19.562Z,1538996479.562 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:01:19.562Z,1538996479.562 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-10-08T11:01:19.562Z,1538996479.562 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:01:19.584Z,1538996479.584 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:01:19.584Z,1538996479.584 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:01:19.991Z,1538996479.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:01:19.991Z,1538996479.991 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-10-08T11:01:19.992Z,1538996479.992 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:01:19.992Z,1538996479.992 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-10-08T11:01:20.337Z,1538996480.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:01:20.338Z,1538996480.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:01:20.338Z,1538996480.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:01:20.338Z,1538996480.338 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:01:20.339Z,1538996480.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:01:20.339Z,1538996480.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:01:29.898Z,1538996489.898 [NAL9602](INFO): Powering up NAL9602 2018-10-08T11:01:40.699Z,1538996500.699 [NAL9602](INFO): NAL9602 initialized 2018-10-08T11:03:32.273Z,1538996612.273 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T10:58:29.9Z 2018-10-08T11:03:32.273Z,1538996612.273 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T11:03:32.273Z,1538996612.273 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T11:03:37.229Z,1538996617.229 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0057.lzma 2018-10-08T11:03:38.008Z,1538996618.008 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0057.lzma.bak 2018-10-08T11:03:38.008Z,1538996618.008 [DataOverHttps](INFO): SBD MOMSN=8613793 2018-10-08T11:03:47.380Z,1538996627.380 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0058.lzma 2018-10-08T11:03:48.144Z,1538996628.144 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0058.lzma.bak 2018-10-08T11:03:48.144Z,1538996628.144 [DataOverHttps](INFO): SBD MOMSN=8613795 2018-10-08T11:03:49.233Z,1538996629.233 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T11:03:49.233Z,1538996629.233 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T11:03:49.233Z,1538996629.233 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T11:04:20.662Z,1538996660.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:04:20.662Z,1538996660.662 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-10-08T11:04:20.662Z,1538996660.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:04:20.664Z,1538996660.664 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:04:20.664Z,1538996660.664 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-10-08T11:04:20.664Z,1538996660.664 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:04:20.678Z,1538996660.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:04:20.678Z,1538996660.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:04:21.068Z,1538996661.068 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:04:21.068Z,1538996661.068 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-10-08T11:04:21.069Z,1538996661.069 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:04:21.069Z,1538996661.069 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-10-08T11:04:21.451Z,1538996661.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:04:21.452Z,1538996661.452 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:04:21.452Z,1538996661.452 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:04:21.452Z,1538996661.452 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:04:21.457Z,1538996661.457 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:04:21.457Z,1538996661.457 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:07:24.278Z,1538996844.278 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:07:24.278Z,1538996844.278 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-10-08T11:07:24.278Z,1538996844.278 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:07:24.280Z,1538996844.280 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:07:24.280Z,1538996844.280 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-10-08T11:07:24.280Z,1538996844.280 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:07:24.308Z,1538996844.308 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:07:24.313Z,1538996844.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:07:24.455Z,1538996844.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:07:24.455Z,1538996844.455 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-10-08T11:07:24.456Z,1538996844.456 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:07:24.456Z,1538996844.456 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-10-08T11:07:24.787Z,1538996844.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:07:24.788Z,1538996844.788 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:07:24.788Z,1538996844.788 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:07:24.788Z,1538996844.788 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:07:24.793Z,1538996844.793 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:07:24.793Z,1538996844.793 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:08:49.338Z,1538996929.338 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T11:08:49.339Z,1538996929.339 [Default:CheckIn:C.Wait] Stopped 2018-10-08T11:08:49.339Z,1538996929.339 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T11:08:49.339Z,1538996929.339 [Default:CheckIn:D] Running Loop=1 2018-10-08T11:08:49.762Z,1538996929.762 [Default:CheckIn:D] Stopped 2018-10-08T11:08:49.762Z,1538996929.762 [Default:CheckIn:E] Running Loop=1 2018-10-08T11:08:50.169Z,1538996930.169 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 207.708219 min 2018-10-08T11:08:50.170Z,1538996930.170 [Default:CheckIn:E] Stopped 2018-10-08T11:08:50.170Z,1538996930.170 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T11:08:50.170Z,1538996930.170 [Default:CheckIn] Stopped 2018-10-08T11:08:50.170Z,1538996930.170 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T11:08:50.170Z,1538996930.170 [Default:CheckIn](INFO): Running loop #21 2018-10-08T11:08:50.170Z,1538996930.170 [Default:CheckIn] Running Loop=21 2018-10-08T11:08:50.170Z,1538996930.170 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T11:08:50.171Z,1538996930.171 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T11:10:24.802Z,1538997024.802 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:10:24.802Z,1538997024.802 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-10-08T11:10:24.802Z,1538997024.802 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:10:24.804Z,1538997024.804 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:10:24.804Z,1538997024.804 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-10-08T11:10:24.804Z,1538997024.804 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:10:24.837Z,1538997024.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:10:24.838Z,1538997024.838 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:10:25.188Z,1538997025.188 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:10:25.188Z,1538997025.188 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-10-08T11:10:25.193Z,1538997025.193 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:10:25.193Z,1538997025.193 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-10-08T11:10:25.610Z,1538997025.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:10:25.610Z,1538997025.610 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:10:25.611Z,1538997025.611 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:10:25.611Z,1538997025.611 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:10:25.611Z,1538997025.611 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:10:25.612Z,1538997025.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:11:42.334Z,1538997102.334 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T11:11:42.334Z,1538997102.334 [NAL9602] Data Fault, FailCount= 5 2018-10-08T11:11:42.334Z,1538997102.334 [NAL9602](ERROR): Data Fault 2018-10-08T11:11:42.374Z,1538997102.374 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T11:11:42.375Z,1538997102.375 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-10-08T11:11:42.734Z,1538997102.734 [NAL9602](INFO): Powering down 2018-10-08T11:11:42.783Z,1538997102.783 [CBIT](INFO): Critical error at 20181008T111142 2018-10-08T11:11:51.175Z,1538997111.175 [RDI_Pathfinder](ERROR): Failed to parse: :HM,G,D,0e8c,0ffd,*15.927,*-0.005,*0.000 2018-10-08T11:12:07.706Z,1538997127.706 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T11:13:25.887Z,1538997205.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:13:25.887Z,1538997205.887 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-10-08T11:13:25.887Z,1538997205.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:13:25.893Z,1538997205.893 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:13:25.893Z,1538997205.893 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-10-08T11:13:25.893Z,1538997205.893 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:13:25.919Z,1538997205.919 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:13:25.919Z,1538997205.919 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:13:26.294Z,1538997206.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:13:26.294Z,1538997206.294 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-10-08T11:13:26.295Z,1538997206.295 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:13:26.295Z,1538997206.295 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-10-08T11:13:26.694Z,1538997206.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:13:26.694Z,1538997206.694 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:13:26.694Z,1538997206.694 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:13:26.695Z,1538997206.695 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:13:26.695Z,1538997206.695 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:13:26.696Z,1538997206.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:13:42.720Z,1538997222.720 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T11:13:42.720Z,1538997222.720 [NAL9602] No Fault, FailCount= 5 2018-10-08T11:13:43.054Z,1538997223.054 [NAL9602](INFO): Powering up NAL9602 2018-10-08T11:13:52.286Z,1538997232.286 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T11:08:50.2Z 2018-10-08T11:13:52.286Z,1538997232.286 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T11:13:52.287Z,1538997232.287 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T11:13:53.919Z,1538997233.919 [NAL9602](INFO): NAL9602 initialized 2018-10-08T11:13:57.209Z,1538997237.209 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181008T074106/Courier0060.lzma 2018-10-08T11:13:57.988Z,1538997237.988 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0060.lzma.bak 2018-10-08T11:13:57.988Z,1538997237.988 [DataOverHttps](INFO): SBD MOMSN=8613801 2018-10-08T11:14:07.271Z,1538997247.271 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T074106/Express0061.lzma 2018-10-08T11:14:08.044Z,1538997248.044 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0061.lzma.bak 2018-10-08T11:14:08.044Z,1538997248.044 [DataOverHttps](INFO): SBD MOMSN=8613803 2018-10-08T11:14:09.151Z,1538997249.151 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T11:14:09.151Z,1538997249.151 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T11:14:09.151Z,1538997249.151 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T11:16:26.779Z,1538997386.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:16:26.779Z,1538997386.779 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-10-08T11:16:26.779Z,1538997386.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:16:26.781Z,1538997386.781 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:16:26.782Z,1538997386.782 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-10-08T11:16:26.782Z,1538997386.782 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:16:26.795Z,1538997386.795 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:16:26.795Z,1538997386.795 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:16:27.166Z,1538997387.166 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:16:27.166Z,1538997387.166 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-10-08T11:16:27.167Z,1538997387.167 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:16:27.167Z,1538997387.167 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-10-08T11:16:27.586Z,1538997387.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:16:27.587Z,1538997387.587 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:16:27.587Z,1538997387.587 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:16:27.587Z,1538997387.587 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:16:27.588Z,1538997387.588 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:16:27.588Z,1538997387.588 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:17:09.843Z,1538997429.843 [RDI_Pathfinder](ERROR): Failed to parse: :HM,G,D,0e8d,0ffd,*15.887,*-0.008,*0.000 2018-10-08T11:19:09.293Z,1538997549.293 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T11:19:09.297Z,1538997549.297 [Default:CheckIn:C.Wait] Stopped 2018-10-08T11:19:09.297Z,1538997549.297 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T11:19:09.297Z,1538997549.297 [Default:CheckIn:D] Running Loop=1 2018-10-08T11:19:09.724Z,1538997549.724 [Default:CheckIn:D] Stopped 2018-10-08T11:19:09.724Z,1538997549.724 [Default:CheckIn:E] Running Loop=1 2018-10-08T11:19:10.115Z,1538997550.115 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 218.040918 min 2018-10-08T11:19:10.115Z,1538997550.115 [Default:CheckIn:E] Stopped 2018-10-08T11:19:10.115Z,1538997550.115 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T11:19:10.115Z,1538997550.115 [Default:CheckIn] Stopped 2018-10-08T11:19:10.115Z,1538997550.115 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T11:19:10.116Z,1538997550.115 [Default:CheckIn](INFO): Running loop #22 2018-10-08T11:19:10.116Z,1538997550.116 [Default:CheckIn] Running Loop=22 2018-10-08T11:19:10.116Z,1538997550.116 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T11:19:10.116Z,1538997550.116 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T11:19:29.700Z,1538997569.700 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:19:29.700Z,1538997569.700 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-10-08T11:19:29.700Z,1538997569.700 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:19:29.704Z,1538997569.704 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:19:29.704Z,1538997569.704 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-10-08T11:19:29.704Z,1538997569.704 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:19:29.718Z,1538997569.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:19:29.718Z,1538997569.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:19:29.870Z,1538997569.870 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:19:29.870Z,1538997569.870 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-10-08T11:19:29.870Z,1538997569.870 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:19:29.871Z,1538997569.871 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-10-08T11:19:30.186Z,1538997570.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:19:30.186Z,1538997570.186 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:19:30.187Z,1538997570.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:19:30.187Z,1538997570.187 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:19:30.187Z,1538997570.187 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:19:30.188Z,1538997570.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:21:10.779Z,1538997670.779 [RDI_Pathfinder](ERROR): Failed to parse: :BS,-32768,-32768,-32768,V 2018-10-08T11:22:30.319Z,1538997750.319 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:22:30.319Z,1538997750.319 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-10-08T11:22:30.319Z,1538997750.319 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:22:30.325Z,1538997750.325 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:22:30.325Z,1538997750.325 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-10-08T11:22:30.325Z,1538997750.325 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:22:30.355Z,1538997750.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:22:30.355Z,1538997750.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:22:30.764Z,1538997750.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:22:30.764Z,1538997750.764 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-10-08T11:22:30.765Z,1538997750.765 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:22:30.765Z,1538997750.765 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-10-08T11:22:31.134Z,1538997751.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:22:31.134Z,1538997751.134 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:22:31.135Z,1538997751.135 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:22:31.135Z,1538997751.135 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:22:31.136Z,1538997751.136 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:22:31.136Z,1538997751.136 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:23:57.249Z,1538997837.249 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T11:23:57.249Z,1538997837.249 [NAL9602] Data Fault, FailCount= 1 2018-10-08T11:23:57.250Z,1538997837.250 [NAL9602](ERROR): Data Fault 2018-10-08T11:23:57.321Z,1538997837.321 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T11:23:57.651Z,1538997837.651 [NAL9602](INFO): Powering down 2018-10-08T11:23:58.499Z,1538997838.499 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T11:23:58.499Z,1538997838.499 [NAL9602] No Fault, FailCount= 1 2018-10-08T11:24:12.092Z,1538997852.092 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T11:19:10.1Z 2018-10-08T11:24:12.092Z,1538997852.092 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T11:24:12.092Z,1538997852.092 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T11:24:17.045Z,1538997857.045 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0063.lzma 2018-10-08T11:24:17.844Z,1538997857.844 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0063.lzma.bak 2018-10-08T11:24:17.844Z,1538997857.844 [DataOverHttps](INFO): SBD MOMSN=8613809 2018-10-08T11:24:27.107Z,1538997867.107 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0064.lzma 2018-10-08T11:24:27.884Z,1538997867.884 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0064.lzma.bak 2018-10-08T11:24:27.884Z,1538997867.884 [DataOverHttps](INFO): SBD MOMSN=8613811 2018-10-08T11:24:27.895Z,1538997867.895 [NAL9602](INFO): Powering up NAL9602 2018-10-08T11:24:30.347Z,1538997870.347 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T11:24:30.347Z,1538997870.347 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T11:24:30.347Z,1538997870.347 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T11:24:38.947Z,1538997878.947 [NAL9602](INFO): NAL9602 initialized 2018-10-08T11:25:03.403Z,1538997903.403 [RDI_Pathfinder](ERROR): Failed to parse: +0.00, +0.00, +0.00, 0.00,23766.88 2018-10-08T11:25:31.289Z,1538997931.289 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:25:31.289Z,1538997931.289 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-10-08T11:25:31.289Z,1538997931.289 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:25:31.291Z,1538997931.291 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:25:31.291Z,1538997931.291 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-10-08T11:25:31.291Z,1538997931.291 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:25:31.305Z,1538997931.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:25:31.305Z,1538997931.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:25:31.742Z,1538997931.742 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:25:31.742Z,1538997931.742 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-10-08T11:25:31.743Z,1538997931.743 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:25:31.743Z,1538997931.743 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-10-08T11:25:32.105Z,1538997932.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:25:32.105Z,1538997932.105 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:25:32.106Z,1538997932.106 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:25:32.106Z,1538997932.106 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:25:32.107Z,1538997932.107 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:25:32.107Z,1538997932.107 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:28:32.308Z,1538998112.308 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:28:32.309Z,1538998112.309 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-10-08T11:28:32.310Z,1538998112.310 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:28:32.311Z,1538998112.311 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:28:32.311Z,1538998112.311 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-10-08T11:28:32.312Z,1538998112.312 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:28:32.337Z,1538998112.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:28:32.338Z,1538998112.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:28:32.733Z,1538998112.733 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:28:32.733Z,1538998112.733 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-10-08T11:28:32.734Z,1538998112.734 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:28:32.734Z,1538998112.734 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-10-08T11:28:33.086Z,1538998113.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:28:33.086Z,1538998113.086 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:28:33.087Z,1538998113.087 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:28:33.087Z,1538998113.087 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:28:33.087Z,1538998113.087 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:28:33.088Z,1538998113.088 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:29:30.503Z,1538998170.503 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T11:29:30.503Z,1538998170.503 [Default:CheckIn:C.Wait] Stopped 2018-10-08T11:29:30.503Z,1538998170.503 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T11:29:30.504Z,1538998170.504 [Default:CheckIn:D] Running Loop=1 2018-10-08T11:29:30.912Z,1538998170.912 [Default:CheckIn:D] Stopped 2018-10-08T11:29:30.912Z,1538998170.912 [Default:CheckIn:E] Running Loop=1 2018-10-08T11:29:31.308Z,1538998171.308 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 228.394059 min 2018-10-08T11:29:31.309Z,1538998171.309 [Default:CheckIn:E] Stopped 2018-10-08T11:29:31.309Z,1538998171.309 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T11:29:31.309Z,1538998171.309 [Default:CheckIn] Stopped 2018-10-08T11:29:31.309Z,1538998171.309 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T11:29:31.310Z,1538998171.310 [Default:CheckIn](INFO): Running loop #23 2018-10-08T11:29:31.310Z,1538998171.310 [Default:CheckIn] Running Loop=23 2018-10-08T11:29:31.310Z,1538998171.310 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T11:29:31.310Z,1538998171.310 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T11:31:33.153Z,1538998293.153 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:31:33.153Z,1538998293.153 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-10-08T11:31:33.153Z,1538998293.153 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:31:33.155Z,1538998293.155 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:31:33.155Z,1538998293.155 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-10-08T11:31:33.155Z,1538998293.155 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:31:33.169Z,1538998293.169 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:31:33.169Z,1538998293.169 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:31:36.337Z,1538998296.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:31:36.337Z,1538998296.337 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-10-08T11:31:36.338Z,1538998296.338 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:31:36.338Z,1538998296.338 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-10-08T11:31:36.486Z,1538998296.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:31:36.486Z,1538998296.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:31:36.487Z,1538998296.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:31:36.487Z,1538998296.487 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:31:36.487Z,1538998296.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:31:36.488Z,1538998296.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:31:56.791Z,1538998316.791 [RDI_Pathfinder](ERROR): only read 3 of 5 data items 2018-10-08T11:31:56.791Z,1538998316.791 [RDI_Pathfinder](ERROR): Failed to parse: :BI,32768,-32768,-32768,V 2018-10-08T11:32:07.599Z,1538998327.599 [RDI_Pathfinder](ERROR): Failed to parse: :H8c,0ffd, -0.006, 0.000 2018-10-08T11:32:28.899Z,1538998348.899 [RDI_Pathfinder](ERROR): Failed to parse: 2018-10-08T11:34:32.871Z,1538998472.871 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T11:29:31.3Z 2018-10-08T11:34:32.871Z,1538998472.871 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T11:34:32.871Z,1538998472.871 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T11:34:37.749Z,1538998477.749 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:34:37.749Z,1538998477.749 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-10-08T11:34:37.750Z,1538998477.750 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:34:37.751Z,1538998477.751 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:34:37.751Z,1538998477.751 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-10-08T11:34:37.752Z,1538998477.752 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:34:37.765Z,1538998477.765 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:34:37.765Z,1538998477.765 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:34:37.821Z,1538998477.821 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0066.lzma 2018-10-08T11:34:37.884Z,1538998477.884 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:34:37.884Z,1538998477.884 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-10-08T11:34:37.884Z,1538998477.884 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:34:37.884Z,1538998477.884 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-10-08T11:34:38.240Z,1538998478.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:34:38.240Z,1538998478.240 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:34:38.241Z,1538998478.241 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:34:38.241Z,1538998478.241 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:34:38.242Z,1538998478.242 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:34:38.242Z,1538998478.242 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:34:38.580Z,1538998478.580 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0066.lzma.bak 2018-10-08T11:34:38.580Z,1538998478.580 [DataOverHttps](INFO): SBD MOMSN=8613817 2018-10-08T11:34:42.966Z,1538998482.966 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T11:34:42.966Z,1538998482.966 [NAL9602] Data Fault, FailCount= 2 2018-10-08T11:34:42.966Z,1538998482.966 [NAL9602](ERROR): Data Fault 2018-10-08T11:34:43.016Z,1538998483.016 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T11:34:43.339Z,1538998483.339 [NAL9602](INFO): Powering down 2018-10-08T11:34:44.212Z,1538998484.212 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T11:34:44.212Z,1538998484.212 [NAL9602] No Fault, FailCount= 2 2018-10-08T11:34:47.825Z,1538998487.825 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20181008T074106/Express0067.lzma 2018-10-08T11:34:48.588Z,1538998488.588 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0067.lzma.bak 2018-10-08T11:34:48.588Z,1538998488.588 [DataOverHttps](INFO): SBD MOMSN=8613819 2018-10-08T11:34:49.622Z,1538998489.622 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T11:34:49.622Z,1538998489.622 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T11:34:49.623Z,1538998489.623 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T11:35:13.364Z,1538998513.364 [NAL9602](INFO): Powering up NAL9602 2018-10-08T11:35:24.159Z,1538998524.159 [NAL9602](INFO): NAL9602 initialized 2018-10-08T11:37:38.247Z,1538998658.247 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:37:38.247Z,1538998658.247 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-10-08T11:37:38.247Z,1538998658.247 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:37:38.253Z,1538998658.253 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:37:38.253Z,1538998658.253 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-10-08T11:37:38.253Z,1538998658.253 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:37:38.275Z,1538998658.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:37:38.275Z,1538998658.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:37:38.677Z,1538998658.677 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:37:38.677Z,1538998658.677 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-10-08T11:37:38.678Z,1538998658.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:37:38.678Z,1538998658.678 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-10-08T11:37:39.043Z,1538998659.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:37:39.043Z,1538998659.043 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:37:39.044Z,1538998659.044 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:37:39.044Z,1538998659.044 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:37:39.044Z,1538998659.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:37:39.045Z,1538998659.045 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:39:49.832Z,1538998789.832 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T11:39:49.832Z,1538998789.832 [Default:CheckIn:C.Wait] Stopped 2018-10-08T11:39:49.833Z,1538998789.833 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T11:39:49.833Z,1538998789.833 [Default:CheckIn:D] Running Loop=1 2018-10-08T11:39:50.233Z,1538998790.233 [Default:CheckIn:D] Stopped 2018-10-08T11:39:50.233Z,1538998790.233 [Default:CheckIn:E] Running Loop=1 2018-10-08T11:39:50.628Z,1538998790.628 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 238.715999 min 2018-10-08T11:39:50.628Z,1538998790.628 [Default:CheckIn:E] Stopped 2018-10-08T11:39:50.628Z,1538998790.628 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T11:39:50.628Z,1538998790.628 [Default:CheckIn] Stopped 2018-10-08T11:39:50.628Z,1538998790.628 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T11:39:50.629Z,1538998790.629 [Default:CheckIn](INFO): Running loop #24 2018-10-08T11:39:50.629Z,1538998790.629 [Default:CheckIn] Running Loop=24 2018-10-08T11:39:50.629Z,1538998790.629 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T11:39:50.629Z,1538998790.629 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T11:40:39.107Z,1538998839.107 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:40:39.107Z,1538998839.107 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-10-08T11:40:39.107Z,1538998839.107 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:40:39.113Z,1538998839.113 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:40:39.113Z,1538998839.113 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-10-08T11:40:39.113Z,1538998839.113 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:40:39.135Z,1538998839.135 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:40:39.135Z,1538998839.135 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:40:39.534Z,1538998839.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:40:39.534Z,1538998839.534 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-10-08T11:40:39.535Z,1538998839.535 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:40:39.535Z,1538998839.535 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-10-08T11:40:39.938Z,1538998839.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:40:39.938Z,1538998839.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:40:39.939Z,1538998839.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:40:39.939Z,1538998839.939 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:40:39.939Z,1538998839.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:40:39.940Z,1538998839.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:43:42.554Z,1538999022.554 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:43:42.554Z,1538999022.554 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-10-08T11:43:42.554Z,1538999022.554 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:43:42.556Z,1538999022.556 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:43:42.556Z,1538999022.556 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-10-08T11:43:42.556Z,1538999022.556 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:43:42.585Z,1538999022.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:43:42.586Z,1538999022.586 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:43:42.706Z,1538999022.706 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:43:42.706Z,1538999022.706 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-10-08T11:43:42.707Z,1538999022.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:43:42.707Z,1538999022.707 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-10-08T11:43:43.135Z,1538999023.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:43:43.135Z,1538999023.135 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:43:43.135Z,1538999023.135 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:43:43.136Z,1538999023.136 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:43:43.136Z,1538999023.136 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:43:43.164Z,1538999023.164 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:44:53.226Z,1538999093.226 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T11:39:50.6Z 2018-10-08T11:44:53.226Z,1538999093.226 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T11:44:53.226Z,1538999093.226 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T11:44:58.200Z,1538999098.200 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0069.lzma 2018-10-08T11:44:58.968Z,1538999098.968 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0069.lzma.bak 2018-10-08T11:44:58.969Z,1538999098.969 [DataOverHttps](INFO): SBD MOMSN=8613825 2018-10-08T11:45:04.319Z,1538999104.319 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T11:45:08.240Z,1538999108.240 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T11:45:08.356Z,1538999108.356 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0070.lzma 2018-10-08T11:45:09.152Z,1538999109.152 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0070.lzma.bak 2018-10-08T11:45:09.152Z,1538999109.152 [DataOverHttps](INFO): SBD MOMSN=8613827 2018-10-08T11:45:10.256Z,1538999110.256 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T11:45:10.256Z,1538999110.256 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T11:45:10.257Z,1538999110.257 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T11:45:25.239Z,1538999125.239 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T11:45:25.239Z,1538999125.239 [NAL9602] Data Fault, FailCount= 3 2018-10-08T11:45:25.239Z,1538999125.239 [NAL9602](ERROR): Data Fault 2018-10-08T11:45:25.276Z,1538999125.276 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T11:45:25.635Z,1538999125.635 [NAL9602](INFO): Powering down 2018-10-08T11:45:26.574Z,1538999126.574 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T11:45:26.574Z,1538999126.574 [NAL9602] No Fault, FailCount= 3 2018-10-08T11:45:55.847Z,1538999155.847 [NAL9602](INFO): Powering up NAL9602 2018-10-08T11:46:06.650Z,1538999166.650 [NAL9602](INFO): NAL9602 initialized 2018-10-08T11:46:43.527Z,1538999203.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:46:43.527Z,1538999203.527 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-10-08T11:46:43.527Z,1538999203.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:46:43.533Z,1538999203.533 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:46:43.534Z,1538999203.534 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-10-08T11:46:43.534Z,1538999203.534 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:46:43.561Z,1538999203.561 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:46:43.561Z,1538999203.561 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:46:43.949Z,1538999203.949 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:46:43.949Z,1538999203.949 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-10-08T11:46:43.950Z,1538999203.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:46:43.950Z,1538999203.950 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-10-08T11:46:44.314Z,1538999204.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:46:44.315Z,1538999204.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:46:44.315Z,1538999204.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:46:44.315Z,1538999204.315 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:46:44.316Z,1538999204.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:46:44.316Z,1538999204.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:47:07.088Z,1538999227.088 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-10-08T11:47:35.622Z,1538999255.622 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T11:49:44.354Z,1538999384.354 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:49:44.354Z,1538999384.354 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-10-08T11:49:44.354Z,1538999384.354 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:49:44.362Z,1538999384.362 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:49:44.362Z,1538999384.362 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-10-08T11:49:44.362Z,1538999384.362 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:49:44.384Z,1538999384.384 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:49:44.384Z,1538999384.384 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:49:44.779Z,1538999384.779 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:49:44.779Z,1538999384.779 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-10-08T11:49:44.779Z,1538999384.779 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:49:44.779Z,1538999384.779 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-10-08T11:49:45.138Z,1538999385.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:49:45.139Z,1538999385.139 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:49:45.139Z,1538999385.139 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:49:45.139Z,1538999385.139 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:49:45.140Z,1538999385.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:49:45.140Z,1538999385.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:50:10.432Z,1538999410.432 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T11:50:10.433Z,1538999410.433 [Default:CheckIn:C.Wait] Stopped 2018-10-08T11:50:10.433Z,1538999410.433 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T11:50:10.433Z,1538999410.433 [Default:CheckIn:D] Running Loop=1 2018-10-08T11:50:10.812Z,1538999410.812 [Default:CheckIn:D] Stopped 2018-10-08T11:50:10.812Z,1538999410.812 [Default:CheckIn:E] Running Loop=1 2018-10-08T11:50:11.209Z,1538999411.209 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 249.059049 min 2018-10-08T11:50:11.209Z,1538999411.209 [Default:CheckIn:E] Stopped 2018-10-08T11:50:11.210Z,1538999411.210 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T11:50:11.210Z,1538999411.210 [Default:CheckIn] Stopped 2018-10-08T11:50:11.210Z,1538999411.210 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T11:50:11.210Z,1538999411.210 [Default:CheckIn](INFO): Running loop #25 2018-10-08T11:50:11.210Z,1538999411.210 [Default:CheckIn] Running Loop=25 2018-10-08T11:50:11.210Z,1538999411.210 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T11:50:11.210Z,1538999411.210 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T11:52:45.218Z,1538999565.218 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:52:45.218Z,1538999565.218 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-10-08T11:52:45.218Z,1538999565.218 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:52:45.220Z,1538999565.220 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:52:45.220Z,1538999565.220 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-10-08T11:52:45.220Z,1538999565.220 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:52:45.234Z,1538999565.234 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:52:45.234Z,1538999565.234 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:52:45.669Z,1538999565.669 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:52:45.669Z,1538999565.669 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-10-08T11:52:45.670Z,1538999565.670 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:52:45.670Z,1538999565.670 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-10-08T11:52:46.034Z,1538999566.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:52:46.034Z,1538999566.034 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:52:46.035Z,1538999566.035 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:52:46.035Z,1538999566.035 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:52:46.035Z,1538999566.035 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:52:46.036Z,1538999566.036 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:55:13.110Z,1538999713.110 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T11:50:11.2Z 2018-10-08T11:55:13.110Z,1538999713.110 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T11:55:13.110Z,1538999713.110 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T11:55:18.084Z,1538999718.084 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181008T074106/Courier0072.lzma 2018-10-08T11:55:18.875Z,1538999718.875 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0072.lzma.bak 2018-10-08T11:55:18.875Z,1538999718.875 [DataOverHttps](INFO): SBD MOMSN=8613833 2018-10-08T11:55:28.605Z,1538999728.605 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0073.lzma 2018-10-08T11:55:29.364Z,1538999729.364 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0073.lzma.bak 2018-10-08T11:55:29.364Z,1538999729.364 [DataOverHttps](INFO): SBD MOMSN=8613835 2018-10-08T11:55:30.450Z,1538999730.450 [RDI_Pathfinder](ERROR): Failed to parse: :HM,G,D,0e8c,0ffd,*15.880,*-0.001,*0.000 2018-10-08T11:55:30.460Z,1538999730.460 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T11:55:30.460Z,1538999730.460 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T11:55:30.460Z,1538999730.460 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T11:55:46.259Z,1538999746.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:55:46.259Z,1538999746.259 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-10-08T11:55:46.259Z,1538999746.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:55:46.262Z,1538999746.262 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:55:46.262Z,1538999746.262 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-10-08T11:55:46.262Z,1538999746.262 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:55:46.287Z,1538999746.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:55:46.288Z,1538999746.288 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:55:46.720Z,1538999746.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:55:46.721Z,1538999746.721 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-10-08T11:55:46.721Z,1538999746.721 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:55:46.721Z,1538999746.721 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-10-08T11:55:47.066Z,1538999747.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:55:47.066Z,1538999747.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:55:47.067Z,1538999747.067 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:55:47.067Z,1538999747.067 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:55:47.067Z,1538999747.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:55:47.068Z,1538999747.068 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:56:09.907Z,1538999769.907 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T11:56:09.907Z,1538999769.907 [NAL9602] Data Fault, FailCount= 4 2018-10-08T11:56:09.907Z,1538999769.907 [NAL9602](ERROR): Data Fault 2018-10-08T11:56:09.977Z,1538999769.977 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T11:56:10.299Z,1538999770.299 [NAL9602](INFO): Powering down 2018-10-08T11:56:11.157Z,1538999771.157 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T11:56:11.157Z,1538999771.157 [NAL9602] No Fault, FailCount= 4 2018-10-08T11:56:40.718Z,1538999800.718 [NAL9602](INFO): Powering up NAL9602 2018-10-08T11:56:51.635Z,1538999811.635 [NAL9602](INFO): NAL9602 initialized 2018-10-08T11:58:47.245Z,1538999927.245 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:58:47.245Z,1538999927.245 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-10-08T11:58:47.245Z,1538999927.245 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T11:58:47.247Z,1538999927.247 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T11:58:47.247Z,1538999927.247 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-10-08T11:58:47.247Z,1538999927.247 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T11:58:47.261Z,1538999927.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T11:58:47.261Z,1538999927.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T11:58:47.681Z,1538999927.681 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T11:58:47.681Z,1538999927.681 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-10-08T11:58:47.682Z,1538999927.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T11:58:47.682Z,1538999927.682 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-10-08T11:58:48.038Z,1538999928.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T11:58:48.039Z,1538999928.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:58:48.039Z,1538999928.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:58:48.040Z,1538999928.040 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T11:58:48.040Z,1538999928.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T11:58:48.040Z,1538999928.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T11:59:42.650Z,1538999982.650 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T12:00:30.784Z,1539000030.784 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T12:00:30.789Z,1539000030.789 [Default:CheckIn:C.Wait] Stopped 2018-10-08T12:00:30.789Z,1539000030.789 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T12:00:30.789Z,1539000030.789 [Default:CheckIn:D] Running Loop=1 2018-10-08T12:00:31.181Z,1539000031.181 [Default:CheckIn:D] Stopped 2018-10-08T12:00:31.181Z,1539000031.181 [Default:CheckIn:E] Running Loop=1 2018-10-08T12:00:31.575Z,1539000031.575 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 259.398535 min 2018-10-08T12:00:31.575Z,1539000031.575 [Default:CheckIn:E] Stopped 2018-10-08T12:00:31.575Z,1539000031.575 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T12:00:31.575Z,1539000031.575 [Default:CheckIn] Stopped 2018-10-08T12:00:31.575Z,1539000031.575 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T12:00:31.576Z,1539000031.576 [Default:CheckIn](INFO): Running loop #26 2018-10-08T12:00:31.576Z,1539000031.576 [Default:CheckIn] Running Loop=26 2018-10-08T12:00:31.576Z,1539000031.576 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T12:00:31.576Z,1539000031.576 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T12:01:48.371Z,1539000108.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:01:48.371Z,1539000108.371 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-10-08T12:01:48.371Z,1539000108.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:01:48.373Z,1539000108.373 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:01:48.373Z,1539000108.373 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-10-08T12:01:48.373Z,1539000108.373 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:01:48.399Z,1539000108.399 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:01:48.399Z,1539000108.399 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:01:48.816Z,1539000108.816 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:01:48.816Z,1539000108.816 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-10-08T12:01:48.816Z,1539000108.816 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:01:48.816Z,1539000108.816 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-10-08T12:01:49.186Z,1539000109.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:01:49.186Z,1539000109.186 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:01:49.187Z,1539000109.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:01:49.187Z,1539000109.187 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:01:49.188Z,1539000109.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:01:49.188Z,1539000109.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:04:49.528Z,1539000289.528 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:04:49.528Z,1539000289.528 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-10-08T12:04:49.528Z,1539000289.528 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:04:49.530Z,1539000289.530 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:04:49.530Z,1539000289.530 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-10-08T12:04:49.531Z,1539000289.531 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:04:49.544Z,1539000289.544 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:04:49.545Z,1539000289.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:04:49.945Z,1539000289.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:04:49.945Z,1539000289.945 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-10-08T12:04:49.946Z,1539000289.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:04:49.946Z,1539000289.946 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-10-08T12:04:50.309Z,1539000290.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:04:50.310Z,1539000290.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:04:50.310Z,1539000290.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:04:50.311Z,1539000290.311 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:04:50.311Z,1539000290.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:04:50.311Z,1539000290.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:05:34.024Z,1539000334.024 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T12:00:31.6Z 2018-10-08T12:05:34.024Z,1539000334.024 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T12:05:34.024Z,1539000334.024 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T12:05:38.983Z,1539000338.983 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0075.lzma 2018-10-08T12:05:39.760Z,1539000339.760 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0075.lzma.bak 2018-10-08T12:05:39.761Z,1539000339.761 [DataOverHttps](INFO): SBD MOMSN=8613841 2018-10-08T12:05:49.951Z,1539000349.951 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0076.lzma 2018-10-08T12:05:50.448Z,1539000350.448 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0076.lzma.bak 2018-10-08T12:05:50.448Z,1539000350.448 [DataOverHttps](INFO): SBD MOMSN=8613843 2018-10-08T12:05:51.533Z,1539000351.533 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T12:05:51.534Z,1539000351.534 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T12:05:51.534Z,1539000351.534 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T12:06:54.507Z,1539000414.507 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T12:06:54.507Z,1539000414.507 [NAL9602] Data Fault, FailCount= 5 2018-10-08T12:06:54.507Z,1539000414.507 [NAL9602](ERROR): Data Fault 2018-10-08T12:06:54.593Z,1539000414.593 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T12:06:54.593Z,1539000414.593 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-10-08T12:06:54.907Z,1539000414.907 [NAL9602](INFO): Powering down 2018-10-08T12:06:54.978Z,1539000414.978 [CBIT](INFO): Critical error at 20181008T120654 2018-10-08T12:07:50.367Z,1539000470.367 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:07:50.367Z,1539000470.367 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-10-08T12:07:50.367Z,1539000470.367 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:07:50.369Z,1539000470.369 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:07:50.369Z,1539000470.369 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-10-08T12:07:50.369Z,1539000470.369 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:07:50.391Z,1539000470.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:07:50.391Z,1539000470.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:07:50.806Z,1539000470.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:07:50.806Z,1539000470.806 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-10-08T12:07:50.806Z,1539000470.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:07:50.806Z,1539000470.806 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-10-08T12:07:51.174Z,1539000471.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:07:51.174Z,1539000471.174 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:07:51.175Z,1539000471.175 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:07:51.175Z,1539000471.175 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:07:51.175Z,1539000471.175 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:07:51.176Z,1539000471.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:08:54.575Z,1539000534.575 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T12:08:54.575Z,1539000534.575 [NAL9602] No Fault, FailCount= 5 2018-10-08T12:08:54.911Z,1539000534.911 [NAL9602](INFO): Powering up NAL9602 2018-10-08T12:09:06.111Z,1539000546.111 [NAL9602](INFO): NAL9602 initialized 2018-10-08T12:10:51.211Z,1539000651.211 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:10:51.212Z,1539000651.212 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-10-08T12:10:51.212Z,1539000651.212 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:10:51.213Z,1539000651.213 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:10:51.214Z,1539000651.214 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-10-08T12:10:51.214Z,1539000651.214 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:10:51.227Z,1539000651.227 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:10:51.227Z,1539000651.227 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:10:51.654Z,1539000651.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:10:51.655Z,1539000651.655 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-10-08T12:10:51.655Z,1539000651.655 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:10:51.655Z,1539000651.655 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-10-08T12:10:52.022Z,1539000652.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:10:52.022Z,1539000652.022 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:10:52.023Z,1539000652.023 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:10:52.023Z,1539000652.023 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:10:52.023Z,1539000652.023 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:10:52.024Z,1539000652.024 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:10:52.030Z,1539000652.030 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T12:10:52.030Z,1539000652.030 [Default:CheckIn:C.Wait] Stopped 2018-10-08T12:10:52.030Z,1539000652.030 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T12:10:52.030Z,1539000652.030 [Default:CheckIn:D] Running Loop=1 2018-10-08T12:10:52.458Z,1539000652.458 [Default:CheckIn:D] Stopped 2018-10-08T12:10:52.458Z,1539000652.458 [Default:CheckIn:E] Running Loop=1 2018-10-08T12:10:52.825Z,1539000652.825 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 269.753158 min 2018-10-08T12:10:52.826Z,1539000652.826 [Default:CheckIn:E] Stopped 2018-10-08T12:10:52.826Z,1539000652.826 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T12:10:52.826Z,1539000652.826 [Default:CheckIn] Stopped 2018-10-08T12:10:52.826Z,1539000652.826 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T12:10:52.826Z,1539000652.826 [Default:CheckIn](INFO): Running loop #27 2018-10-08T12:10:52.826Z,1539000652.826 [Default:CheckIn] Running Loop=27 2018-10-08T12:10:52.827Z,1539000652.827 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T12:10:52.827Z,1539000652.827 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T12:13:52.091Z,1539000832.091 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:13:52.092Z,1539000832.092 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-10-08T12:13:52.092Z,1539000832.092 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:13:52.094Z,1539000832.094 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:13:52.094Z,1539000832.094 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-10-08T12:13:52.094Z,1539000832.094 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:13:52.115Z,1539000832.115 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:13:52.116Z,1539000832.116 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:13:52.546Z,1539000832.546 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:13:52.546Z,1539000832.546 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-10-08T12:13:52.547Z,1539000832.547 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:13:52.547Z,1539000832.547 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-10-08T12:13:52.902Z,1539000832.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:13:52.902Z,1539000832.902 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:13:52.903Z,1539000832.903 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:13:52.903Z,1539000832.903 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:13:52.904Z,1539000832.904 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:13:52.904Z,1539000832.904 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:15:55.166Z,1539000955.166 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T12:10:52.8Z 2018-10-08T12:15:55.166Z,1539000955.166 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T12:15:55.167Z,1539000955.167 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T12:16:00.116Z,1539000960.116 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181008T074106/Courier0078.lzma 2018-10-08T12:16:00.888Z,1539000960.888 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0078.lzma.bak 2018-10-08T12:16:00.888Z,1539000960.888 [DataOverHttps](INFO): SBD MOMSN=8613849 2018-10-08T12:16:10.184Z,1539000970.184 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0079.lzma 2018-10-08T12:16:10.916Z,1539000970.916 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0079.lzma.bak 2018-10-08T12:16:10.916Z,1539000970.916 [DataOverHttps](INFO): SBD MOMSN=8613851 2018-10-08T12:16:11.997Z,1539000971.997 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T12:16:11.997Z,1539000971.997 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T12:16:11.998Z,1539000971.998 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T12:16:53.019Z,1539001013.019 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:16:53.019Z,1539001013.019 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-10-08T12:16:53.019Z,1539001013.019 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:16:53.021Z,1539001013.021 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:16:53.021Z,1539001013.021 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-10-08T12:16:53.021Z,1539001013.021 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:16:53.045Z,1539001013.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:16:53.045Z,1539001013.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:16:53.461Z,1539001013.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:16:53.461Z,1539001013.461 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-10-08T12:16:53.461Z,1539001013.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:16:53.462Z,1539001013.462 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-10-08T12:16:53.822Z,1539001013.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:16:53.822Z,1539001013.822 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:16:53.823Z,1539001013.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:16:53.823Z,1539001013.823 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:16:53.824Z,1539001013.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:16:53.824Z,1539001013.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:19:08.863Z,1539001148.863 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T12:19:08.863Z,1539001148.863 [NAL9602] Data Fault, FailCount= 1 2018-10-08T12:19:08.863Z,1539001148.863 [NAL9602](ERROR): Data Fault 2018-10-08T12:19:08.928Z,1539001148.928 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T12:19:12.035Z,1539001152.035 [NAL9602](INFO): Powering down 2018-10-08T12:19:12.608Z,1539001152.608 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T12:19:12.608Z,1539001152.608 [NAL9602] No Fault, FailCount= 1 2018-10-08T12:19:42.127Z,1539001182.127 [NAL9602](INFO): Powering up NAL9602 2018-10-08T12:19:53.011Z,1539001193.011 [NAL9602](INFO): NAL9602 initialized 2018-10-08T12:19:53.859Z,1539001193.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:19:53.859Z,1539001193.859 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-10-08T12:19:53.859Z,1539001193.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:19:53.865Z,1539001193.865 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:19:53.865Z,1539001193.865 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-10-08T12:19:53.865Z,1539001193.865 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:19:53.891Z,1539001193.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:19:53.891Z,1539001193.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:19:54.310Z,1539001194.310 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:19:54.310Z,1539001194.310 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-10-08T12:19:54.311Z,1539001194.311 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:19:54.311Z,1539001194.311 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-10-08T12:19:54.679Z,1539001194.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:19:54.680Z,1539001194.680 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:19:54.680Z,1539001194.680 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:19:54.680Z,1539001194.680 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:19:54.685Z,1539001194.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:19:54.685Z,1539001194.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:21:12.496Z,1539001272.496 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T12:21:12.496Z,1539001272.496 [Default:CheckIn:C.Wait] Stopped 2018-10-08T12:21:12.496Z,1539001272.496 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T12:21:12.496Z,1539001272.496 [Default:CheckIn:D] Running Loop=1 2018-10-08T12:21:12.889Z,1539001272.889 [Default:CheckIn:D] Stopped 2018-10-08T12:21:12.889Z,1539001272.889 [Default:CheckIn:E] Running Loop=1 2018-10-08T12:21:13.306Z,1539001273.306 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 280.093652 min 2018-10-08T12:21:13.306Z,1539001273.306 [Default:CheckIn:E] Stopped 2018-10-08T12:21:13.306Z,1539001273.306 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T12:21:13.307Z,1539001273.307 [Default:CheckIn] Stopped 2018-10-08T12:21:13.307Z,1539001273.307 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T12:21:13.307Z,1539001273.307 [Default:CheckIn](INFO): Running loop #28 2018-10-08T12:21:13.307Z,1539001273.307 [Default:CheckIn] Running Loop=28 2018-10-08T12:21:13.308Z,1539001273.308 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T12:21:13.308Z,1539001273.308 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T12:22:55.007Z,1539001375.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:22:55.007Z,1539001375.007 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-10-08T12:22:55.007Z,1539001375.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:22:55.009Z,1539001375.009 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:22:55.009Z,1539001375.009 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-10-08T12:22:55.009Z,1539001375.009 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:22:55.042Z,1539001375.042 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:22:55.043Z,1539001375.043 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:22:55.441Z,1539001375.441 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:22:55.441Z,1539001375.441 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-10-08T12:22:55.442Z,1539001375.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:22:55.442Z,1539001375.442 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-10-08T12:22:55.810Z,1539001375.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:22:55.810Z,1539001375.810 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:22:55.811Z,1539001375.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:22:55.811Z,1539001375.811 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:22:55.812Z,1539001375.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:22:55.812Z,1539001375.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:25:55.875Z,1539001555.875 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:25:55.875Z,1539001555.875 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-10-08T12:25:55.875Z,1539001555.875 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:25:55.877Z,1539001555.877 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:25:55.877Z,1539001555.877 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-10-08T12:25:55.878Z,1539001555.878 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:25:55.907Z,1539001555.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:25:55.907Z,1539001555.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:25:56.316Z,1539001556.316 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:25:56.316Z,1539001556.316 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-10-08T12:25:56.317Z,1539001556.317 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:25:56.317Z,1539001556.317 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-10-08T12:25:56.688Z,1539001556.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:25:56.688Z,1539001556.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:25:56.688Z,1539001556.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:25:56.689Z,1539001556.689 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:25:56.690Z,1539001556.690 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:25:56.690Z,1539001556.690 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:26:15.477Z,1539001575.477 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T12:21:13.3Z 2018-10-08T12:26:15.478Z,1539001575.478 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T12:26:15.478Z,1539001575.478 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T12:26:20.467Z,1539001580.467 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0081.lzma 2018-10-08T12:26:21.244Z,1539001581.244 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0081.lzma.bak 2018-10-08T12:26:21.244Z,1539001581.244 [DataOverHttps](INFO): SBD MOMSN=8613857 2018-10-08T12:26:36.205Z,1539001596.205 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0082.lzma 2018-10-08T12:26:36.970Z,1539001596.970 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0082.lzma.bak 2018-10-08T12:26:36.970Z,1539001596.970 [DataOverHttps](INFO): SBD MOMSN=8613859 2018-10-08T12:26:39.037Z,1539001599.037 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T12:26:39.041Z,1539001599.041 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T12:26:39.041Z,1539001599.041 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T12:26:52.316Z,1539001612.316 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error 2018-10-08T12:26:52.316Z,1539001612.316 [RDI_Pathfinder](ERROR): Failed to parse: :TS, 0 2018-10-08T12:28:29.758Z,1539001709.758 [RDI_Pathfinder](ERROR): Failed to parse: :BD, +0.00, +0.00, +0.00, 0.00,27564.45 2018-10-08T12:28:56.965Z,1539001736.965 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:28:56.966Z,1539001736.966 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-10-08T12:28:56.966Z,1539001736.966 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:28:56.967Z,1539001736.967 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:28:56.968Z,1539001736.968 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-10-08T12:28:56.968Z,1539001736.968 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:28:56.981Z,1539001736.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:28:56.981Z,1539001736.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:28:57.400Z,1539001737.400 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:28:57.400Z,1539001737.400 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-10-08T12:28:57.405Z,1539001737.405 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:28:57.405Z,1539001737.405 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-10-08T12:28:57.776Z,1539001737.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:28:57.776Z,1539001737.776 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:28:57.777Z,1539001737.777 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:28:57.777Z,1539001737.777 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:28:57.778Z,1539001737.778 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:28:57.778Z,1539001737.778 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:29:54.301Z,1539001794.301 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T12:29:54.302Z,1539001794.302 [NAL9602] Data Fault, FailCount= 2 2018-10-08T12:29:54.302Z,1539001794.302 [NAL9602](ERROR): Data Fault 2018-10-08T12:29:54.388Z,1539001794.388 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T12:29:54.678Z,1539001794.678 [NAL9602](INFO): Powering down 2018-10-08T12:29:55.553Z,1539001795.553 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T12:29:55.553Z,1539001795.553 [NAL9602] No Fault, FailCount= 2 2018-10-08T12:30:15.598Z,1539001815.598 [RDI_Pathfinder](ERROR): Failed to parse: :HM,G,D,0e8c,0ffe, 15.941, -0.006, 0.000 2018-10-08T12:30:24.775Z,1539001824.775 [NAL9602](INFO): Powering up NAL9602 2018-10-08T12:30:35.575Z,1539001835.575 [NAL9602](INFO): NAL9602 initialized 2018-10-08T12:31:39.524Z,1539001899.524 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T12:31:39.529Z,1539001899.529 [Default:CheckIn:C.Wait] Stopped 2018-10-08T12:31:39.530Z,1539001899.530 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T12:31:39.530Z,1539001899.530 [Default:CheckIn:D] Running Loop=1 2018-10-08T12:31:39.920Z,1539001899.920 [Default:CheckIn:D] Stopped 2018-10-08T12:31:39.921Z,1539001899.921 [Default:CheckIn:E] Running Loop=1 2018-10-08T12:31:40.297Z,1539001900.297 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 290.544206 min 2018-10-08T12:31:40.297Z,1539001900.297 [Default:CheckIn:E] Stopped 2018-10-08T12:31:40.297Z,1539001900.297 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T12:31:40.297Z,1539001900.297 [Default:CheckIn] Stopped 2018-10-08T12:31:40.297Z,1539001900.297 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T12:31:40.298Z,1539001900.298 [Default:CheckIn](INFO): Running loop #29 2018-10-08T12:31:40.298Z,1539001900.298 [Default:CheckIn] Running Loop=29 2018-10-08T12:31:40.298Z,1539001900.298 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T12:31:40.298Z,1539001900.298 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T12:32:00.792Z,1539001920.792 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:32:00.792Z,1539001920.792 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-10-08T12:32:00.792Z,1539001920.792 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:32:00.814Z,1539001920.814 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:32:00.814Z,1539001920.814 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-10-08T12:32:00.814Z,1539001920.814 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:32:00.843Z,1539001920.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:32:00.844Z,1539001920.844 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:32:00.959Z,1539001920.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:32:00.959Z,1539001920.959 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-10-08T12:32:00.960Z,1539001920.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:32:00.960Z,1539001920.960 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-10-08T12:32:01.358Z,1539001921.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:32:01.359Z,1539001921.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:32:01.359Z,1539001921.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:32:01.360Z,1539001921.360 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:32:01.360Z,1539001921.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:32:01.360Z,1539001921.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:34:22.577Z,1539002062.577 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T12:35:01.503Z,1539002101.503 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:35:01.503Z,1539002101.503 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-10-08T12:35:01.503Z,1539002101.503 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:35:01.509Z,1539002101.509 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:35:01.509Z,1539002101.509 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-10-08T12:35:01.510Z,1539002101.510 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:35:01.532Z,1539002101.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:35:01.532Z,1539002101.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:35:01.891Z,1539002101.891 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:35:01.891Z,1539002101.891 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-10-08T12:35:01.892Z,1539002101.892 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:35:01.892Z,1539002101.892 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-10-08T12:35:02.295Z,1539002102.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:35:02.295Z,1539002102.295 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:35:02.296Z,1539002102.296 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:35:02.296Z,1539002102.296 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:35:02.302Z,1539002102.302 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:35:02.302Z,1539002102.302 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:36:20.002Z,1539002180.002 [RDI_Pathfinder](ERROR): Failed to parse: :B,-32768,-32768,-32768,V 2018-10-08T12:36:42.803Z,1539002202.803 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T12:31:40.3Z 2018-10-08T12:36:42.803Z,1539002202.803 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T12:36:42.803Z,1539002202.803 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T12:36:49.213Z,1539002209.213 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0084.lzma 2018-10-08T12:36:49.988Z,1539002209.988 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0084.lzma.bak 2018-10-08T12:36:49.988Z,1539002209.988 [DataOverHttps](INFO): SBD MOMSN=8613865 2018-10-08T12:36:59.289Z,1539002219.289 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0085.lzma 2018-10-08T12:37:00.072Z,1539002220.072 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0085.lzma.bak 2018-10-08T12:37:00.072Z,1539002220.072 [DataOverHttps](INFO): SBD MOMSN=8613867 2018-10-08T12:37:01.201Z,1539002221.201 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T12:37:01.201Z,1539002221.201 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T12:37:01.201Z,1539002221.201 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T12:38:02.303Z,1539002282.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:38:02.303Z,1539002282.303 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-10-08T12:38:02.303Z,1539002282.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:38:02.309Z,1539002282.309 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:38:02.309Z,1539002282.309 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-10-08T12:38:02.309Z,1539002282.309 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:38:02.331Z,1539002282.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:38:02.331Z,1539002282.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:38:02.715Z,1539002282.715 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:38:02.715Z,1539002282.715 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-10-08T12:38:02.716Z,1539002282.716 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:38:02.716Z,1539002282.716 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-10-08T12:38:03.080Z,1539002283.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:38:03.081Z,1539002283.081 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:38:03.082Z,1539002283.082 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:38:03.082Z,1539002283.082 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:38:03.082Z,1539002283.082 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:38:03.083Z,1539002283.083 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:40:37.143Z,1539002437.143 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T12:40:37.143Z,1539002437.143 [NAL9602] Data Fault, FailCount= 3 2018-10-08T12:40:37.143Z,1539002437.143 [NAL9602](ERROR): Data Fault 2018-10-08T12:40:37.201Z,1539002437.201 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T12:40:37.535Z,1539002437.535 [NAL9602](INFO): Powering down 2018-10-08T12:40:38.388Z,1539002438.388 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T12:40:38.388Z,1539002438.388 [NAL9602] No Fault, FailCount= 3 2018-10-08T12:41:03.167Z,1539002463.167 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:41:03.167Z,1539002463.167 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-10-08T12:41:03.167Z,1539002463.167 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:41:03.189Z,1539002463.189 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:41:03.189Z,1539002463.189 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-10-08T12:41:03.189Z,1539002463.189 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:41:03.219Z,1539002463.219 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:41:03.219Z,1539002463.219 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:41:03.632Z,1539002463.632 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:41:03.632Z,1539002463.632 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-10-08T12:41:03.637Z,1539002463.637 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:41:03.637Z,1539002463.637 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-10-08T12:41:03.967Z,1539002463.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:41:03.968Z,1539002463.968 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:41:03.968Z,1539002463.968 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:41:03.969Z,1539002463.969 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:41:03.969Z,1539002463.969 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:41:03.970Z,1539002463.970 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:41:07.935Z,1539002467.935 [NAL9602](INFO): Powering up NAL9602 2018-10-08T12:41:18.795Z,1539002478.795 [NAL9602](INFO): NAL9602 initialized 2018-10-08T12:42:01.603Z,1539002521.603 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T12:42:01.603Z,1539002521.603 [Default:CheckIn:C.Wait] Stopped 2018-10-08T12:42:01.603Z,1539002521.603 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T12:42:01.603Z,1539002521.603 [Default:CheckIn:D] Running Loop=1 2018-10-08T12:42:02.005Z,1539002522.005 [Default:CheckIn:D] Stopped 2018-10-08T12:42:02.005Z,1539002522.005 [Default:CheckIn:E] Running Loop=1 2018-10-08T12:42:02.413Z,1539002522.413 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 300.912272 min 2018-10-08T12:42:02.413Z,1539002522.413 [Default:CheckIn:E] Stopped 2018-10-08T12:42:02.413Z,1539002522.413 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T12:42:02.413Z,1539002522.413 [Default:CheckIn] Stopped 2018-10-08T12:42:02.414Z,1539002522.414 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T12:42:02.414Z,1539002522.414 [Default:CheckIn](INFO): Running loop #30 2018-10-08T12:42:02.414Z,1539002522.414 [Default:CheckIn] Running Loop=30 2018-10-08T12:42:02.414Z,1539002522.414 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T12:42:02.414Z,1539002522.414 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T12:44:04.220Z,1539002644.220 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:44:04.220Z,1539002644.220 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-10-08T12:44:04.221Z,1539002644.221 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:44:04.223Z,1539002644.223 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:44:04.223Z,1539002644.223 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-10-08T12:44:04.223Z,1539002644.223 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:44:04.252Z,1539002644.252 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:44:04.253Z,1539002644.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:44:04.662Z,1539002644.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:44:04.662Z,1539002644.662 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-10-08T12:44:04.663Z,1539002644.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:44:04.663Z,1539002644.663 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-10-08T12:44:05.034Z,1539002645.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:44:05.034Z,1539002645.034 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:44:05.035Z,1539002645.035 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:44:05.035Z,1539002645.035 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:44:05.035Z,1539002645.035 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:44:05.036Z,1539002645.036 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:47:04.462Z,1539002824.462 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T12:42:02.4Z 2018-10-08T12:47:04.462Z,1539002824.462 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T12:47:04.462Z,1539002824.462 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T12:47:05.240Z,1539002825.240 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:47:05.241Z,1539002825.241 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-10-08T12:47:05.241Z,1539002825.241 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:47:05.245Z,1539002825.245 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:47:05.245Z,1539002825.245 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-10-08T12:47:05.245Z,1539002825.245 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:47:05.307Z,1539002825.307 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:47:05.307Z,1539002825.307 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:47:05.430Z,1539002825.430 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:47:05.430Z,1539002825.430 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-10-08T12:47:05.431Z,1539002825.431 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:47:05.431Z,1539002825.431 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-10-08T12:47:05.770Z,1539002825.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:47:05.771Z,1539002825.771 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:47:05.771Z,1539002825.771 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:47:05.771Z,1539002825.771 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:47:05.772Z,1539002825.772 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:47:05.772Z,1539002825.772 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:47:09.418Z,1539002829.418 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0087.lzma 2018-10-08T12:47:10.188Z,1539002830.188 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0087.lzma.bak 2018-10-08T12:47:10.188Z,1539002830.188 [DataOverHttps](INFO): SBD MOMSN=8613873 2018-10-08T12:47:14.577Z,1539002834.577 [RDI_Pathfinder](ERROR): Failed to parse: :BE,-32768,-32768,-32768,V 2018-10-08T12:47:19.517Z,1539002839.517 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0088.lzma 2018-10-08T12:47:20.288Z,1539002840.288 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0088.lzma.bak 2018-10-08T12:47:20.288Z,1539002840.288 [DataOverHttps](INFO): SBD MOMSN=8613875 2018-10-08T12:47:21.374Z,1539002841.374 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T12:47:21.374Z,1539002841.374 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T12:47:21.374Z,1539002841.374 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T12:50:06.060Z,1539003006.060 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:50:06.060Z,1539003006.060 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-10-08T12:50:06.060Z,1539003006.060 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:50:06.070Z,1539003006.070 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:50:06.070Z,1539003006.070 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-10-08T12:50:06.070Z,1539003006.070 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:50:06.101Z,1539003006.101 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:50:06.102Z,1539003006.102 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:50:06.536Z,1539003006.536 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:50:06.536Z,1539003006.536 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-10-08T12:50:06.537Z,1539003006.537 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:50:06.537Z,1539003006.537 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-10-08T12:50:06.880Z,1539003006.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:50:06.881Z,1539003006.881 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:50:06.881Z,1539003006.881 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:50:06.882Z,1539003006.882 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:50:06.882Z,1539003006.882 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:50:06.883Z,1539003006.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:50:57.562Z,1539003057.562 [RDI_Pathfinder](ERROR): Failed to parse: 2018-10-08T12:51:19.939Z,1539003079.939 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T12:51:19.939Z,1539003079.939 [NAL9602] Data Fault, FailCount= 4 2018-10-08T12:51:19.939Z,1539003079.939 [NAL9602](ERROR): Data Fault 2018-10-08T12:51:20.067Z,1539003080.067 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T12:51:20.343Z,1539003080.343 [NAL9602](INFO): Powering down 2018-10-08T12:51:21.237Z,1539003081.237 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T12:51:21.238Z,1539003081.238 [NAL9602] No Fault, FailCount= 4 2018-10-08T12:51:40.884Z,1539003100.884 [BPC1](ERROR): BPC1B: No match for stick with serial number:1717 in the onboard configuration file. 2018-10-08T12:51:50.431Z,1539003110.431 [NAL9602](INFO): Powering up NAL9602 2018-10-08T12:52:01.631Z,1539003121.631 [NAL9602](INFO): NAL9602 initialized 2018-10-08T12:52:21.778Z,1539003141.778 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T12:52:21.778Z,1539003141.778 [Default:CheckIn:C.Wait] Stopped 2018-10-08T12:52:21.778Z,1539003141.778 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T12:52:21.778Z,1539003141.778 [Default:CheckIn:D] Running Loop=1 2018-10-08T12:52:22.178Z,1539003142.178 [Default:CheckIn:D] Stopped 2018-10-08T12:52:22.178Z,1539003142.178 [Default:CheckIn:E] Running Loop=1 2018-10-08T12:52:22.574Z,1539003142.574 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 311.248503 min 2018-10-08T12:52:22.574Z,1539003142.574 [Default:CheckIn:E] Stopped 2018-10-08T12:52:22.574Z,1539003142.574 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T12:52:22.574Z,1539003142.574 [Default:CheckIn] Stopped 2018-10-08T12:52:22.574Z,1539003142.574 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T12:52:22.574Z,1539003142.574 [Default:CheckIn](INFO): Running loop #31 2018-10-08T12:52:22.575Z,1539003142.575 [Default:CheckIn] Running Loop=31 2018-10-08T12:52:22.575Z,1539003142.575 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T12:52:22.575Z,1539003142.575 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T12:53:07.067Z,1539003187.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:53:07.067Z,1539003187.067 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-10-08T12:53:07.067Z,1539003187.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:53:07.073Z,1539003187.073 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:53:07.073Z,1539003187.073 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-10-08T12:53:07.073Z,1539003187.073 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:53:07.095Z,1539003187.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:53:07.095Z,1539003187.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:53:07.502Z,1539003187.502 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:53:07.502Z,1539003187.502 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-10-08T12:53:07.503Z,1539003187.503 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:53:07.503Z,1539003187.503 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-10-08T12:53:07.874Z,1539003187.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:53:07.874Z,1539003187.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:53:07.875Z,1539003187.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:53:07.875Z,1539003187.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:53:07.875Z,1539003187.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:53:07.876Z,1539003187.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:54:22.687Z,1539003262.687 [BPC1](ERROR): BPC1B failed to parse battery data due to unrecognized msg size. 2018-10-08T12:54:36.347Z,1539003276.347 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-10-08T12:56:08.080Z,1539003368.080 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:56:08.080Z,1539003368.080 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-10-08T12:56:08.080Z,1539003368.080 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:56:08.098Z,1539003368.098 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:56:08.098Z,1539003368.098 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-10-08T12:56:08.098Z,1539003368.098 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:56:08.120Z,1539003368.120 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:56:08.120Z,1539003368.120 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:56:08.545Z,1539003368.545 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:56:08.545Z,1539003368.545 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-10-08T12:56:08.546Z,1539003368.546 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:56:08.546Z,1539003368.546 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-10-08T12:56:08.898Z,1539003368.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:56:08.899Z,1539003368.899 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:56:08.899Z,1539003368.899 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:56:08.900Z,1539003368.900 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:56:08.900Z,1539003368.900 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:56:08.900Z,1539003368.900 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:57:24.339Z,1539003444.339 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T12:52:22.6Z 2018-10-08T12:57:24.339Z,1539003444.339 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T12:57:24.339Z,1539003444.339 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T12:57:29.276Z,1539003449.276 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181008T074106/Courier0090.lzma 2018-10-08T12:57:30.048Z,1539003450.048 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0090.lzma.bak 2018-10-08T12:57:30.048Z,1539003450.048 [DataOverHttps](INFO): SBD MOMSN=8613881 2018-10-08T12:57:39.373Z,1539003459.373 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0091.lzma 2018-10-08T12:57:40.132Z,1539003460.132 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0091.lzma.bak 2018-10-08T12:57:40.132Z,1539003460.132 [DataOverHttps](INFO): SBD MOMSN=8613883 2018-10-08T12:57:41.357Z,1539003461.357 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T12:57:41.357Z,1539003461.357 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T12:57:41.357Z,1539003461.357 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T12:59:09.263Z,1539003549.263 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:59:09.263Z,1539003549.263 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-10-08T12:59:09.263Z,1539003549.263 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T12:59:09.265Z,1539003549.265 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T12:59:09.265Z,1539003549.265 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-10-08T12:59:09.265Z,1539003549.265 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T12:59:09.278Z,1539003549.278 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T12:59:09.278Z,1539003549.278 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T12:59:09.719Z,1539003549.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T12:59:09.719Z,1539003549.719 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-10-08T12:59:09.719Z,1539003549.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T12:59:09.719Z,1539003549.719 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-10-08T12:59:10.070Z,1539003550.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T12:59:10.070Z,1539003550.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:59:10.071Z,1539003550.071 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T12:59:10.071Z,1539003550.071 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T12:59:10.071Z,1539003550.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T12:59:10.072Z,1539003550.072 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:02:03.295Z,1539003723.295 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T13:02:03.295Z,1539003723.295 [NAL9602] Data Fault, FailCount= 5 2018-10-08T13:02:03.295Z,1539003723.295 [NAL9602](ERROR): Data Fault 2018-10-08T13:02:03.377Z,1539003723.377 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T13:02:03.381Z,1539003723.381 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-10-08T13:02:03.691Z,1539003723.691 [NAL9602](INFO): Powering down 2018-10-08T13:02:03.751Z,1539003723.751 [CBIT](INFO): Critical error at 20181008T130203 2018-10-08T13:02:10.138Z,1539003730.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:02:10.138Z,1539003730.138 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-10-08T13:02:10.138Z,1539003730.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:02:10.140Z,1539003730.140 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:02:10.140Z,1539003730.140 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-10-08T13:02:10.140Z,1539003730.140 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:02:10.177Z,1539003730.177 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:02:10.177Z,1539003730.177 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:02:10.546Z,1539003730.546 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:02:10.546Z,1539003730.546 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-10-08T13:02:10.547Z,1539003730.547 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:02:10.547Z,1539003730.547 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-10-08T13:02:10.937Z,1539003730.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:02:10.938Z,1539003730.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:02:10.938Z,1539003730.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:02:10.938Z,1539003730.938 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:02:10.939Z,1539003730.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:02:10.939Z,1539003730.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:02:28.608Z,1539003748.608 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T13:02:41.812Z,1539003761.812 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T13:02:41.813Z,1539003761.813 [Default:CheckIn:C.Wait] Stopped 2018-10-08T13:02:41.813Z,1539003761.813 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T13:02:41.813Z,1539003761.813 [Default:CheckIn:D] Running Loop=1 2018-10-08T13:02:42.232Z,1539003762.232 [Default:CheckIn:D] Stopped 2018-10-08T13:02:42.237Z,1539003762.237 [Default:CheckIn:E] Running Loop=1 2018-10-08T13:02:42.641Z,1539003762.641 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 321.582715 min 2018-10-08T13:02:42.641Z,1539003762.641 [Default:CheckIn:E] Stopped 2018-10-08T13:02:42.641Z,1539003762.641 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T13:02:42.641Z,1539003762.641 [Default:CheckIn] Stopped 2018-10-08T13:02:42.641Z,1539003762.641 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T13:02:42.642Z,1539003762.642 [Default:CheckIn](INFO): Running loop #32 2018-10-08T13:02:42.642Z,1539003762.642 [Default:CheckIn] Running Loop=32 2018-10-08T13:02:42.642Z,1539003762.642 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T13:02:42.642Z,1539003762.642 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T13:04:03.611Z,1539003843.611 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T13:04:03.613Z,1539003843.613 [NAL9602] No Fault, FailCount= 5 2018-10-08T13:04:03.931Z,1539003843.931 [NAL9602](INFO): Powering up NAL9602 2018-10-08T13:04:14.803Z,1539003854.803 [NAL9602](INFO): NAL9602 initialized 2018-10-08T13:04:41.652Z,1539003881.652 [RDI_Pathfinder](ERROR): only read 1 of 5 data items 2018-10-08T13:04:41.652Z,1539003881.652 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-327V 2018-10-08T13:05:10.960Z,1539003910.960 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:05:10.961Z,1539003910.961 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-10-08T13:05:10.961Z,1539003910.961 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:05:10.963Z,1539003910.963 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:05:10.963Z,1539003910.963 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-10-08T13:05:10.963Z,1539003910.963 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:05:10.992Z,1539003910.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:05:10.992Z,1539003910.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:05:11.388Z,1539003911.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:05:11.388Z,1539003911.388 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-10-08T13:05:11.388Z,1539003911.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:05:11.388Z,1539003911.388 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-10-08T13:05:11.750Z,1539003911.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:05:11.750Z,1539003911.750 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:05:11.751Z,1539003911.751 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:05:11.751Z,1539003911.751 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:05:11.751Z,1539003911.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:05:11.752Z,1539003911.752 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:05:54.645Z,1539003954.645 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error 2018-10-08T13:05:54.645Z,1539003954.645 [RDI_Pathfinder](ERROR): Failed to parse: :TS,18100806105851,35.0, -0.1, 0.0, 0 2018-10-08T13:07:45.074Z,1539004065.074 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T13:02:42.6Z 2018-10-08T13:07:45.074Z,1539004065.074 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T13:07:45.074Z,1539004065.074 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T13:07:50.097Z,1539004070.097 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181008T074106/Courier0093.lzma 2018-10-08T13:07:50.891Z,1539004070.891 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0093.lzma.bak 2018-10-08T13:07:50.891Z,1539004070.891 [DataOverHttps](INFO): SBD MOMSN=8613889 2018-10-08T13:07:56.537Z,1539004076.537 [RDI_Pathfinder](ERROR): Failed to parse: :BE,-32768,-32768,-32768,V 2018-10-08T13:08:00.197Z,1539004080.197 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0094.lzma 2018-10-08T13:08:00.967Z,1539004080.967 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0094.lzma.bak 2018-10-08T13:08:00.967Z,1539004080.967 [DataOverHttps](INFO): SBD MOMSN=8613891 2018-10-08T13:08:02.006Z,1539004082.006 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T13:08:02.006Z,1539004082.006 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T13:08:02.007Z,1539004082.007 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T13:08:11.780Z,1539004091.780 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:08:11.780Z,1539004091.780 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-10-08T13:08:11.780Z,1539004091.780 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:08:11.782Z,1539004091.782 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:08:11.782Z,1539004091.782 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-10-08T13:08:11.782Z,1539004091.782 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:08:11.811Z,1539004091.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:08:11.811Z,1539004091.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:08:12.195Z,1539004092.195 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:08:12.195Z,1539004092.195 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-10-08T13:08:12.195Z,1539004092.195 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:08:12.195Z,1539004092.195 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-10-08T13:08:12.573Z,1539004092.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:08:12.574Z,1539004092.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:08:12.574Z,1539004092.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:08:12.574Z,1539004092.574 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:08:12.575Z,1539004092.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:08:12.575Z,1539004092.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:10:40.610Z,1539004240.610 [RDI_Pathfinder](ERROR): Failed to parse: 2018-10-08T13:11:12.732Z,1539004272.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:11:12.732Z,1539004272.732 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-10-08T13:11:12.732Z,1539004272.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:11:12.734Z,1539004272.734 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:11:12.734Z,1539004272.734 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-10-08T13:11:12.734Z,1539004272.734 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:11:12.751Z,1539004272.751 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:11:12.752Z,1539004272.752 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:11:13.155Z,1539004273.155 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:11:13.155Z,1539004273.155 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-10-08T13:11:13.156Z,1539004273.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:11:13.156Z,1539004273.156 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-10-08T13:11:13.562Z,1539004273.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:11:13.562Z,1539004273.562 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:11:13.563Z,1539004273.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:11:13.563Z,1539004273.563 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:11:13.564Z,1539004273.564 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:11:13.564Z,1539004273.564 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:13:02.280Z,1539004382.280 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T13:13:02.280Z,1539004382.280 [Default:CheckIn:C.Wait] Stopped 2018-10-08T13:13:02.280Z,1539004382.280 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T13:13:02.281Z,1539004382.281 [Default:CheckIn:D] Running Loop=1 2018-10-08T13:13:02.669Z,1539004382.669 [Default:CheckIn:D] Stopped 2018-10-08T13:13:02.670Z,1539004382.670 [Default:CheckIn:E] Running Loop=1 2018-10-08T13:13:03.053Z,1539004383.053 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 331.923340 min 2018-10-08T13:13:03.053Z,1539004383.053 [Default:CheckIn:E] Stopped 2018-10-08T13:13:03.054Z,1539004383.054 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T13:13:03.054Z,1539004383.054 [Default:CheckIn] Stopped 2018-10-08T13:13:03.054Z,1539004383.054 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T13:13:03.054Z,1539004383.054 [Default:CheckIn](INFO): Running loop #33 2018-10-08T13:13:03.054Z,1539004383.054 [Default:CheckIn] Running Loop=33 2018-10-08T13:13:03.054Z,1539004383.054 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T13:13:03.054Z,1539004383.054 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T13:14:13.668Z,1539004453.668 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:14:13.668Z,1539004453.668 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-10-08T13:14:13.668Z,1539004453.668 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:14:13.675Z,1539004453.675 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:14:13.675Z,1539004453.675 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-10-08T13:14:13.675Z,1539004453.675 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:14:13.696Z,1539004453.696 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:14:13.696Z,1539004453.696 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:14:14.054Z,1539004454.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:14:14.054Z,1539004454.054 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-10-08T13:14:14.055Z,1539004454.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:14:14.055Z,1539004454.055 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-10-08T13:14:14.425Z,1539004454.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:14:14.425Z,1539004454.425 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:14:14.426Z,1539004454.426 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:14:14.426Z,1539004454.426 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:14:14.427Z,1539004454.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:14:14.427Z,1539004454.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:14:16.803Z,1539004456.803 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T13:14:16.803Z,1539004456.803 [NAL9602] Data Fault, FailCount= 1 2018-10-08T13:14:16.803Z,1539004456.803 [NAL9602](ERROR): Data Fault 2018-10-08T13:14:16.860Z,1539004456.860 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T13:14:17.191Z,1539004457.191 [NAL9602](INFO): Powering down 2018-10-08T13:14:18.056Z,1539004458.056 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T13:14:18.056Z,1539004458.056 [NAL9602] No Fault, FailCount= 1 2018-10-08T13:14:47.332Z,1539004487.332 [NAL9602](INFO): Powering up NAL9602 2018-10-08T13:14:58.523Z,1539004498.523 [NAL9602](INFO): NAL9602 initialized 2018-10-08T13:17:14.515Z,1539004634.515 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:17:14.515Z,1539004634.515 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-10-08T13:17:14.515Z,1539004634.515 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:17:14.517Z,1539004634.517 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:17:14.518Z,1539004634.518 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-10-08T13:17:14.518Z,1539004634.518 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:17:14.543Z,1539004634.543 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:17:14.543Z,1539004634.543 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:17:14.934Z,1539004634.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:17:14.934Z,1539004634.934 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-10-08T13:17:14.935Z,1539004634.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:17:14.935Z,1539004634.935 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-10-08T13:17:15.328Z,1539004635.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:17:15.328Z,1539004635.328 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:17:15.329Z,1539004635.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:17:15.333Z,1539004635.333 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:17:15.334Z,1539004635.334 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:17:15.334Z,1539004635.334 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:18:05.827Z,1539004685.827 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T13:13:03.1Z 2018-10-08T13:18:05.828Z,1539004685.828 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T13:18:05.828Z,1539004685.828 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T13:18:10.780Z,1539004690.780 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0096.lzma 2018-10-08T13:18:11.561Z,1539004691.561 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0096.lzma.bak 2018-10-08T13:18:11.561Z,1539004691.561 [DataOverHttps](INFO): SBD MOMSN=8613897 2018-10-08T13:18:20.864Z,1539004700.864 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T074106/Express0097.lzma 2018-10-08T13:18:21.624Z,1539004701.624 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0097.lzma.bak 2018-10-08T13:18:21.624Z,1539004701.624 [DataOverHttps](INFO): SBD MOMSN=8613899 2018-10-08T13:18:22.708Z,1539004702.708 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T13:18:22.708Z,1539004702.708 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T13:18:22.708Z,1539004702.708 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T13:18:27.671Z,1539004707.671 [RDI_Pathfinder](ERROR): only read 2 of 5 data items 2018-10-08T13:18:27.671Z,1539004707.671 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768-32768,V 2018-10-08T13:20:15.671Z,1539004815.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:20:15.671Z,1539004815.671 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-10-08T13:20:15.671Z,1539004815.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:20:15.673Z,1539004815.673 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:20:15.673Z,1539004815.673 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-10-08T13:20:15.673Z,1539004815.673 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:20:15.686Z,1539004815.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:20:15.686Z,1539004815.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:20:16.091Z,1539004816.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:20:16.091Z,1539004816.091 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-10-08T13:20:16.092Z,1539004816.092 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:20:16.092Z,1539004816.092 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-10-08T13:20:16.480Z,1539004816.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:20:16.480Z,1539004816.480 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:20:16.481Z,1539004816.481 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:20:16.481Z,1539004816.481 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:20:16.482Z,1539004816.482 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:20:16.482Z,1539004816.482 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:23:16.805Z,1539004996.805 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:23:16.806Z,1539004996.806 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-10-08T13:23:16.806Z,1539004996.806 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:23:16.807Z,1539004996.807 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:23:16.808Z,1539004996.808 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-10-08T13:23:16.808Z,1539004996.808 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:23:16.843Z,1539004996.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:23:16.843Z,1539004996.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:23:17.230Z,1539004997.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:23:17.230Z,1539004997.230 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-10-08T13:23:17.231Z,1539004997.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:23:17.231Z,1539004997.231 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-10-08T13:23:17.640Z,1539004997.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:23:17.640Z,1539004997.640 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:23:17.640Z,1539004997.640 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:23:17.646Z,1539004997.646 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:23:17.646Z,1539004997.646 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:23:17.647Z,1539004997.647 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:23:23.232Z,1539005003.232 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T13:23:23.232Z,1539005003.232 [Default:CheckIn:C.Wait] Stopped 2018-10-08T13:23:23.232Z,1539005003.232 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T13:23:23.232Z,1539005003.232 [Default:CheckIn:D] Running Loop=1 2018-10-08T13:23:23.627Z,1539005003.627 [Default:CheckIn:D] Stopped 2018-10-08T13:23:23.627Z,1539005003.627 [Default:CheckIn:E] Running Loop=1 2018-10-08T13:23:24.025Z,1539005004.025 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 342.272624 min 2018-10-08T13:23:24.025Z,1539005004.025 [Default:CheckIn:E] Stopped 2018-10-08T13:23:24.025Z,1539005004.025 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T13:23:24.025Z,1539005004.025 [Default:CheckIn] Stopped 2018-10-08T13:23:24.025Z,1539005004.025 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T13:23:24.026Z,1539005004.026 [Default:CheckIn](INFO): Running loop #34 2018-10-08T13:23:24.026Z,1539005004.026 [Default:CheckIn] Running Loop=34 2018-10-08T13:23:24.026Z,1539005004.026 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T13:23:24.026Z,1539005004.026 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T13:25:00.279Z,1539005100.279 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T13:25:00.279Z,1539005100.279 [NAL9602] Data Fault, FailCount= 2 2018-10-08T13:25:00.279Z,1539005100.279 [NAL9602](ERROR): Data Fault 2018-10-08T13:25:00.354Z,1539005100.354 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T13:25:00.683Z,1539005100.683 [NAL9602](INFO): Powering down 2018-10-08T13:25:01.554Z,1539005101.554 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T13:25:01.554Z,1539005101.554 [NAL9602] No Fault, FailCount= 2 2018-10-08T13:25:30.760Z,1539005130.760 [NAL9602](INFO): Powering up NAL9602 2018-10-08T13:25:41.951Z,1539005141.951 [NAL9602](INFO): NAL9602 initialized 2018-10-08T13:26:06.519Z,1539005166.519 [RDI_Pathfinder](ERROR): Failed to parse: :BE,-32768,-32768,-32768,V 2018-10-08T13:26:17.725Z,1539005177.725 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:26:17.725Z,1539005177.725 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-10-08T13:26:17.726Z,1539005177.726 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:26:17.727Z,1539005177.727 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:26:17.728Z,1539005177.728 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-10-08T13:26:17.728Z,1539005177.728 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:26:17.745Z,1539005177.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:26:17.745Z,1539005177.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:26:18.167Z,1539005178.167 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:26:18.167Z,1539005178.167 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-10-08T13:26:18.168Z,1539005178.168 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:26:18.168Z,1539005178.168 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-10-08T13:26:18.553Z,1539005178.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:26:18.554Z,1539005178.554 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:26:18.554Z,1539005178.554 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:26:18.554Z,1539005178.554 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:26:18.555Z,1539005178.555 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:26:18.555Z,1539005178.555 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:28:26.431Z,1539005306.431 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T13:23:24.0Z 2018-10-08T13:28:26.431Z,1539005306.431 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T13:28:26.431Z,1539005306.431 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T13:28:31.405Z,1539005311.405 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0099.lzma 2018-10-08T13:28:32.179Z,1539005312.179 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0099.lzma.bak 2018-10-08T13:28:32.179Z,1539005312.179 [DataOverHttps](INFO): SBD MOMSN=8613905 2018-10-08T13:28:32.245Z,1539005312.245 [RDI_Pathfinder](ERROR): Failed to parse: :HM,G,D,0e8c,0ffe, 15.887, -0.005, 0.000 2018-10-08T13:28:41.512Z,1539005321.512 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T074106/Express0100.lzma 2018-10-08T13:28:42.296Z,1539005322.296 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0100.lzma.bak 2018-10-08T13:28:42.296Z,1539005322.296 [DataOverHttps](INFO): SBD MOMSN=8613907 2018-10-08T13:28:43.372Z,1539005323.372 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T13:28:43.372Z,1539005323.372 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T13:28:43.373Z,1539005323.373 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T13:29:18.809Z,1539005358.809 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error 2018-10-08T13:29:18.810Z,1539005358.810 [RDI_Pathfinder](ERROR): Failed to parse: :TS,18100806342251,35.0, -0.1, 0.0,1448.BI,-32768,-32768,-32768,-32768,V 2018-10-08T13:29:18.838Z,1539005358.838 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:29:18.839Z,1539005358.839 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-10-08T13:29:18.839Z,1539005358.839 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:29:18.840Z,1539005358.840 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:29:18.841Z,1539005358.841 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-10-08T13:29:18.841Z,1539005358.841 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:29:18.865Z,1539005358.865 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:29:18.865Z,1539005358.865 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:29:22.552Z,1539005362.552 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:29:22.552Z,1539005362.552 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-10-08T13:29:22.552Z,1539005362.552 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:29:22.552Z,1539005362.552 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-10-08T13:29:22.679Z,1539005362.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:29:22.679Z,1539005362.679 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:29:22.680Z,1539005362.680 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:29:22.680Z,1539005362.680 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:29:22.693Z,1539005362.693 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:29:22.693Z,1539005362.693 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:32:23.093Z,1539005543.093 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:32:23.093Z,1539005543.093 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-10-08T13:32:23.093Z,1539005543.093 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:32:23.095Z,1539005543.095 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:32:23.095Z,1539005543.095 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-10-08T13:32:23.095Z,1539005543.095 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:32:23.109Z,1539005543.109 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:32:23.109Z,1539005543.109 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:32:23.526Z,1539005543.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:32:23.526Z,1539005543.526 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-10-08T13:32:23.527Z,1539005543.527 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:32:23.527Z,1539005543.527 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-10-08T13:32:23.882Z,1539005543.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:32:23.882Z,1539005543.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:32:23.883Z,1539005543.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:32:23.883Z,1539005543.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:32:23.883Z,1539005543.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:32:23.884Z,1539005543.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:33:15.591Z,1539005595.591 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error 2018-10-08T13:33:15.591Z,1539005595.591 [RDI_Pathfinder](ERROR): Failed to parse: :TS,18100806381951,35.0, -0.1, 0.0,1448.9I,-32768,-32768,-32768,-32768,V 2018-10-08T13:33:43.748Z,1539005623.748 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T13:33:43.749Z,1539005623.749 [Default:CheckIn:C.Wait] Stopped 2018-10-08T13:33:43.749Z,1539005623.749 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T13:33:43.749Z,1539005623.749 [Default:CheckIn:D] Running Loop=1 2018-10-08T13:33:44.145Z,1539005624.145 [Default:CheckIn:D] Stopped 2018-10-08T13:33:44.145Z,1539005624.145 [Default:CheckIn:E] Running Loop=1 2018-10-08T13:33:44.554Z,1539005624.554 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 352.614616 min 2018-10-08T13:33:44.554Z,1539005624.554 [Default:CheckIn:E] Stopped 2018-10-08T13:33:44.554Z,1539005624.554 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T13:33:44.554Z,1539005624.554 [Default:CheckIn] Stopped 2018-10-08T13:33:44.555Z,1539005624.555 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T13:33:44.555Z,1539005624.555 [Default:CheckIn](INFO): Running loop #35 2018-10-08T13:33:44.555Z,1539005624.555 [Default:CheckIn] Running Loop=35 2018-10-08T13:33:44.555Z,1539005624.555 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T13:33:44.555Z,1539005624.555 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T13:35:24.027Z,1539005724.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:35:24.027Z,1539005724.027 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-10-08T13:35:24.027Z,1539005724.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:35:24.033Z,1539005724.033 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:35:24.033Z,1539005724.033 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-10-08T13:35:24.033Z,1539005724.033 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:35:24.059Z,1539005724.059 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:35:24.059Z,1539005724.059 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:35:24.458Z,1539005724.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:35:24.458Z,1539005724.458 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-10-08T13:35:24.459Z,1539005724.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:35:24.459Z,1539005724.459 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-10-08T13:35:24.826Z,1539005724.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:35:24.826Z,1539005724.826 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:35:24.827Z,1539005724.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:35:24.827Z,1539005724.827 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:35:24.827Z,1539005724.827 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:35:24.828Z,1539005724.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:35:44.767Z,1539005744.767 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T13:35:44.767Z,1539005744.767 [NAL9602] Data Fault, FailCount= 3 2018-10-08T13:35:44.767Z,1539005744.767 [NAL9602](ERROR): Data Fault 2018-10-08T13:35:44.840Z,1539005744.840 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T13:35:45.167Z,1539005745.167 [NAL9602](INFO): Powering down 2018-10-08T13:35:46.039Z,1539005746.039 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T13:35:46.039Z,1539005746.039 [NAL9602] No Fault, FailCount= 3 2018-10-08T13:36:15.227Z,1539005775.227 [NAL9602](INFO): Powering up NAL9602 2018-10-08T13:36:28.019Z,1539005788.019 [NAL9602](INFO): NAL9602 initialized 2018-10-08T13:38:25.207Z,1539005905.207 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:38:25.207Z,1539005905.207 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-10-08T13:38:25.207Z,1539005905.207 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:38:25.209Z,1539005905.209 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:38:25.209Z,1539005905.209 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-10-08T13:38:25.209Z,1539005905.209 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:38:25.233Z,1539005905.233 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:38:25.233Z,1539005905.233 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:38:25.607Z,1539005905.607 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:38:25.607Z,1539005905.607 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-10-08T13:38:25.607Z,1539005905.607 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:38:25.607Z,1539005905.607 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-10-08T13:38:25.974Z,1539005905.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:38:25.974Z,1539005905.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:38:25.975Z,1539005905.975 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:38:25.975Z,1539005905.975 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:38:25.975Z,1539005905.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:38:25.976Z,1539005905.976 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:38:46.388Z,1539005926.388 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T13:33:44.6Z 2018-10-08T13:38:46.388Z,1539005926.388 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T13:38:46.388Z,1539005926.388 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T13:38:51.290Z,1539005931.290 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0102.lzma 2018-10-08T13:38:52.084Z,1539005932.084 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0102.lzma.bak 2018-10-08T13:38:52.084Z,1539005932.084 [DataOverHttps](INFO): SBD MOMSN=8613913 2018-10-08T13:39:01.382Z,1539005941.382 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0103.lzma 2018-10-08T13:39:02.169Z,1539005942.169 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0103.lzma.bak 2018-10-08T13:39:02.170Z,1539005942.170 [DataOverHttps](INFO): SBD MOMSN=8613915 2018-10-08T13:39:03.242Z,1539005943.242 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T13:39:03.242Z,1539005943.242 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T13:39:03.242Z,1539005943.242 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T13:41:27.897Z,1539006087.897 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:41:27.897Z,1539006087.897 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-10-08T13:41:27.898Z,1539006087.898 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:41:27.899Z,1539006087.899 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:41:27.899Z,1539006087.899 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-10-08T13:41:27.900Z,1539006087.900 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:41:27.933Z,1539006087.933 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:41:27.937Z,1539006087.937 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:41:27.938Z,1539006087.938 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:41:27.938Z,1539006087.938 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:44:03.554Z,1539006243.554 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T13:44:03.555Z,1539006243.555 [Default:CheckIn:C.Wait] Stopped 2018-10-08T13:44:03.555Z,1539006243.555 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T13:44:03.555Z,1539006243.555 [Default:CheckIn:D] Running Loop=1 2018-10-08T13:44:03.932Z,1539006243.932 [Default:CheckIn:D] Stopped 2018-10-08T13:44:03.932Z,1539006243.932 [Default:CheckIn:E] Running Loop=1 2018-10-08T13:44:04.371Z,1539006244.371 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 362.944368 min 2018-10-08T13:44:04.371Z,1539006244.371 [Default:CheckIn:E] Stopped 2018-10-08T13:44:04.371Z,1539006244.371 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T13:44:04.371Z,1539006244.371 [Default:CheckIn] Stopped 2018-10-08T13:44:04.371Z,1539006244.371 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T13:44:04.372Z,1539006244.372 [Default:CheckIn](INFO): Running loop #36 2018-10-08T13:44:04.372Z,1539006244.372 [Default:CheckIn] Running Loop=36 2018-10-08T13:44:04.372Z,1539006244.372 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T13:44:04.372Z,1539006244.372 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T13:46:29.035Z,1539006389.035 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T13:46:29.035Z,1539006389.035 [NAL9602] Data Fault, FailCount= 4 2018-10-08T13:46:29.035Z,1539006389.035 [NAL9602](ERROR): Data Fault 2018-10-08T13:46:29.112Z,1539006389.112 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T13:46:29.431Z,1539006389.431 [NAL9602](INFO): Powering down 2018-10-08T13:46:30.334Z,1539006390.334 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T13:46:30.334Z,1539006390.334 [NAL9602] No Fault, FailCount= 4 2018-10-08T13:46:59.579Z,1539006419.579 [NAL9602](INFO): Powering up NAL9602 2018-10-08T13:47:10.383Z,1539006430.383 [NAL9602](INFO): NAL9602 initialized 2018-10-08T13:49:06.391Z,1539006546.391 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T13:44:04.4Z 2018-10-08T13:49:06.391Z,1539006546.391 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T13:49:06.392Z,1539006546.392 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T13:49:11.347Z,1539006551.347 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0105.lzma 2018-10-08T13:49:12.124Z,1539006552.124 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0105.lzma.bak 2018-10-08T13:49:12.124Z,1539006552.124 [DataOverHttps](INFO): SBD MOMSN=8613921 2018-10-08T13:49:16.467Z,1539006556.467 [RDI_Pathfinder](ERROR): Failed to parse: :BD, +0.00, +0.00, +0.00, 0.00,32399.98 2018-10-08T13:49:21.423Z,1539006561.423 [DataOverHttps](INFO): Sending 221 bytes from file Logs/20181008T074106/Express0106.lzma 2018-10-08T13:49:22.215Z,1539006562.215 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0106.lzma.bak 2018-10-08T13:49:22.215Z,1539006562.215 [DataOverHttps](INFO): SBD MOMSN=8613923 2018-10-08T13:49:23.320Z,1539006563.320 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T13:49:23.320Z,1539006563.320 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T13:49:23.320Z,1539006563.320 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T13:54:23.719Z,1539006863.719 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T13:54:23.719Z,1539006863.719 [Default:CheckIn:C.Wait] Stopped 2018-10-08T13:54:23.719Z,1539006863.719 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T13:54:23.719Z,1539006863.719 [Default:CheckIn:D] Running Loop=1 2018-10-08T13:54:24.123Z,1539006864.123 [Default:CheckIn:D] Stopped 2018-10-08T13:54:24.123Z,1539006864.123 [Default:CheckIn:E] Running Loop=1 2018-10-08T13:54:24.525Z,1539006864.525 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 373.280924 min 2018-10-08T13:54:24.525Z,1539006864.525 [Default:CheckIn:E] Stopped 2018-10-08T13:54:24.526Z,1539006864.526 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T13:54:24.526Z,1539006864.526 [Default:CheckIn] Stopped 2018-10-08T13:54:24.526Z,1539006864.526 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T13:54:24.526Z,1539006864.526 [Default:CheckIn](INFO): Running loop #37 2018-10-08T13:54:24.526Z,1539006864.526 [Default:CheckIn] Running Loop=37 2018-10-08T13:54:24.526Z,1539006864.526 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T13:54:24.526Z,1539006864.526 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T13:56:31.362Z,1539006991.362 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:56:31.363Z,1539006991.363 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-10-08T13:56:31.363Z,1539006991.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:56:31.363Z,1539006991.363 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-10-08T13:56:31.476Z,1539006991.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:56:31.476Z,1539006991.476 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:56:31.477Z,1539006991.477 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:56:31.477Z,1539006991.477 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:56:31.478Z,1539006991.478 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:56:31.478Z,1539006991.478 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:57:11.259Z,1539007031.259 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T13:57:11.259Z,1539007031.259 [NAL9602] Data Fault, FailCount= 5 2018-10-08T13:57:11.259Z,1539007031.259 [NAL9602](ERROR): Data Fault 2018-10-08T13:57:11.346Z,1539007031.346 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T13:57:11.346Z,1539007031.346 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-10-08T13:57:11.659Z,1539007031.659 [NAL9602](INFO): Powering down 2018-10-08T13:57:11.722Z,1539007031.722 [CBIT](INFO): Critical error at 20181008T135711 2018-10-08T13:59:11.275Z,1539007151.275 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T13:59:11.275Z,1539007151.275 [NAL9602] No Fault, FailCount= 5 2018-10-08T13:59:11.579Z,1539007151.579 [NAL9602](INFO): Powering up NAL9602 2018-10-08T13:59:22.383Z,1539007162.383 [NAL9602](INFO): NAL9602 initialized 2018-10-08T13:59:26.095Z,1539007166.095 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T13:54:24.5Z 2018-10-08T13:59:26.095Z,1539007166.095 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T13:59:26.095Z,1539007166.095 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T13:59:31.035Z,1539007171.035 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181008T074106/Courier0108.lzma 2018-10-08T13:59:31.851Z,1539007171.851 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0108.lzma.bak 2018-10-08T13:59:31.851Z,1539007171.851 [DataOverHttps](INFO): SBD MOMSN=8613929 2018-10-08T13:59:31.923Z,1539007171.923 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:59:31.923Z,1539007171.923 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-10-08T13:59:31.923Z,1539007171.923 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T13:59:31.930Z,1539007171.930 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T13:59:31.930Z,1539007171.930 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-10-08T13:59:31.930Z,1539007171.930 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T13:59:31.956Z,1539007171.956 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T13:59:31.956Z,1539007171.956 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T13:59:32.881Z,1539007172.881 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T13:59:32.881Z,1539007172.881 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-10-08T13:59:32.882Z,1539007172.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T13:59:32.882Z,1539007172.882 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-10-08T13:59:32.978Z,1539007172.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T13:59:32.978Z,1539007172.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:59:32.979Z,1539007172.979 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:59:32.979Z,1539007172.979 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T13:59:32.979Z,1539007172.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T13:59:32.980Z,1539007172.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T13:59:37.542Z,1539007177.542 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T13:59:41.314Z,1539007181.314 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0109.lzma 2018-10-08T13:59:42.072Z,1539007182.072 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0109.lzma.bak 2018-10-08T13:59:42.072Z,1539007182.072 [DataOverHttps](INFO): SBD MOMSN=8613931 2018-10-08T13:59:43.130Z,1539007183.130 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T13:59:43.130Z,1539007183.130 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T13:59:43.131Z,1539007183.131 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T14:00:23.131Z,1539007223.131 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T14:00:24.341Z,1539007224.341 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T14:01:50.215Z,1539007310.215 [BPC1](ERROR): BPC1B failed to parse battery data due to unrecognized msg size. 2018-10-08T14:02:04.578Z,1539007324.578 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-10-08T14:02:33.065Z,1539007353.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:02:33.065Z,1539007353.065 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-10-08T14:02:33.065Z,1539007353.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:02:33.067Z,1539007353.067 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:02:33.067Z,1539007353.067 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-10-08T14:02:33.067Z,1539007353.067 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:02:33.093Z,1539007353.093 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:02:33.097Z,1539007353.097 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:02:33.514Z,1539007353.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:02:33.514Z,1539007353.514 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-10-08T14:02:33.515Z,1539007353.515 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:02:33.515Z,1539007353.515 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-10-08T14:02:33.883Z,1539007353.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:02:33.884Z,1539007353.884 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:02:33.884Z,1539007353.884 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:02:33.884Z,1539007353.884 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:02:33.885Z,1539007353.885 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:02:33.886Z,1539007353.886 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:03:19.631Z,1539007399.631 [RDI_Pathfinder](ERROR): Failed to parse: :BE,-32768,-32768,-32768,V 2018-10-08T14:04:43.540Z,1539007483.540 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T14:04:43.540Z,1539007483.540 [Default:CheckIn:C.Wait] Stopped 2018-10-08T14:04:43.540Z,1539007483.540 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T14:04:43.541Z,1539007483.541 [Default:CheckIn:D] Running Loop=1 2018-10-08T14:04:43.921Z,1539007483.921 [Default:CheckIn:D] Stopped 2018-10-08T14:04:43.921Z,1539007483.921 [Default:CheckIn:E] Running Loop=1 2018-10-08T14:04:44.337Z,1539007484.337 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 383.610872 min 2018-10-08T14:04:44.337Z,1539007484.337 [Default:CheckIn:E] Stopped 2018-10-08T14:04:44.338Z,1539007484.338 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T14:04:44.338Z,1539007484.338 [Default:CheckIn] Stopped 2018-10-08T14:04:44.338Z,1539007484.338 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T14:04:44.338Z,1539007484.338 [Default:CheckIn](INFO): Running loop #38 2018-10-08T14:04:44.338Z,1539007484.338 [Default:CheckIn] Running Loop=38 2018-10-08T14:04:44.338Z,1539007484.338 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T14:04:44.338Z,1539007484.338 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T14:05:33.999Z,1539007533.999 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:05:33.999Z,1539007533.999 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-10-08T14:05:33.999Z,1539007533.999 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:05:34.005Z,1539007534.005 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:05:34.005Z,1539007534.005 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-10-08T14:05:34.005Z,1539007534.005 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:05:34.031Z,1539007534.031 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:05:34.031Z,1539007534.031 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:05:34.417Z,1539007534.417 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:05:34.417Z,1539007534.417 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-10-08T14:05:34.418Z,1539007534.418 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:05:34.418Z,1539007534.418 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-10-08T14:05:34.802Z,1539007534.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:05:34.803Z,1539007534.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:05:34.803Z,1539007534.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:05:34.803Z,1539007534.803 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:05:34.804Z,1539007534.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:05:34.804Z,1539007534.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:08:36.103Z,1539007716.103 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:08:36.104Z,1539007716.104 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-10-08T14:08:36.104Z,1539007716.104 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:08:36.106Z,1539007716.106 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:08:36.106Z,1539007716.106 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-10-08T14:08:36.106Z,1539007716.106 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:08:36.146Z,1539007716.146 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:08:36.146Z,1539007716.146 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:08:36.301Z,1539007716.301 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:08:36.301Z,1539007716.301 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-10-08T14:08:36.302Z,1539007716.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:08:36.302Z,1539007716.302 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-10-08T14:08:36.606Z,1539007716.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:08:36.606Z,1539007716.606 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:08:36.606Z,1539007716.606 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:08:36.607Z,1539007716.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:08:36.607Z,1539007716.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:08:36.608Z,1539007716.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:09:27.483Z,1539007767.483 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T14:09:27.483Z,1539007767.483 [NAL9602] Data Fault, FailCount= 1 2018-10-08T14:09:27.483Z,1539007767.483 [NAL9602](ERROR): Data Fault 2018-10-08T14:09:27.569Z,1539007767.569 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T14:09:27.887Z,1539007767.887 [NAL9602](INFO): Powering down 2018-10-08T14:09:28.754Z,1539007768.754 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T14:09:28.754Z,1539007768.754 [NAL9602] No Fault, FailCount= 1 2018-10-08T14:09:46.736Z,1539007786.736 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T14:04:44.3Z 2018-10-08T14:09:46.736Z,1539007786.736 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T14:09:46.736Z,1539007786.736 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T14:09:51.767Z,1539007791.767 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181008T074106/Courier0111.lzma 2018-10-08T14:09:52.545Z,1539007792.545 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0111.lzma.bak 2018-10-08T14:09:52.545Z,1539007792.545 [DataOverHttps](INFO): SBD MOMSN=8613937 2018-10-08T14:09:58.147Z,1539007798.147 [NAL9602](INFO): Powering up NAL9602 2018-10-08T14:10:01.847Z,1539007801.847 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T074106/Express0112.lzma 2018-10-08T14:10:02.612Z,1539007802.612 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0112.lzma.bak 2018-10-08T14:10:02.612Z,1539007802.612 [DataOverHttps](INFO): SBD MOMSN=8613939 2018-10-08T14:10:03.692Z,1539007803.692 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T14:10:03.692Z,1539007803.692 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T14:10:03.692Z,1539007803.692 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T14:10:08.995Z,1539007808.995 [NAL9602](INFO): NAL9602 initialized 2018-10-08T14:11:36.887Z,1539007896.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:11:36.887Z,1539007896.887 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-10-08T14:11:36.887Z,1539007896.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:11:36.889Z,1539007896.889 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:11:36.889Z,1539007896.889 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-10-08T14:11:36.889Z,1539007896.889 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:11:36.923Z,1539007896.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:11:36.923Z,1539007896.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:11:37.299Z,1539007897.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:11:37.299Z,1539007897.299 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-10-08T14:11:37.300Z,1539007897.300 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:11:37.300Z,1539007897.300 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-10-08T14:11:37.674Z,1539007897.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:11:37.674Z,1539007897.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:11:37.675Z,1539007897.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:11:37.675Z,1539007897.675 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:11:37.676Z,1539007897.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:11:37.676Z,1539007897.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:14:37.719Z,1539008077.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:14:37.719Z,1539008077.719 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-10-08T14:14:37.719Z,1539008077.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:14:37.721Z,1539008077.721 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:14:37.721Z,1539008077.721 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-10-08T14:14:37.721Z,1539008077.721 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:14:37.747Z,1539008077.747 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:14:37.747Z,1539008077.747 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:14:38.131Z,1539008078.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:14:38.132Z,1539008078.132 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-10-08T14:14:38.132Z,1539008078.132 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:14:38.132Z,1539008078.132 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-10-08T14:14:38.540Z,1539008078.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:14:38.540Z,1539008078.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:14:38.540Z,1539008078.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:14:38.549Z,1539008078.549 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:14:38.550Z,1539008078.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:14:38.550Z,1539008078.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:15:03.813Z,1539008103.813 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T14:15:03.817Z,1539008103.817 [Default:CheckIn:C.Wait] Stopped 2018-10-08T14:15:03.817Z,1539008103.817 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T14:15:03.817Z,1539008103.817 [Default:CheckIn:D] Running Loop=1 2018-10-08T14:15:04.234Z,1539008104.234 [Default:CheckIn:D] Stopped 2018-10-08T14:15:04.234Z,1539008104.234 [Default:CheckIn:E] Running Loop=1 2018-10-08T14:15:04.615Z,1539008104.615 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 393.949414 min 2018-10-08T14:15:04.616Z,1539008104.616 [Default:CheckIn:E] Stopped 2018-10-08T14:15:04.616Z,1539008104.616 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T14:15:04.616Z,1539008104.616 [Default:CheckIn] Stopped 2018-10-08T14:15:04.616Z,1539008104.616 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T14:15:04.616Z,1539008104.616 [Default:CheckIn](INFO): Running loop #39 2018-10-08T14:15:04.616Z,1539008104.616 [Default:CheckIn] Running Loop=39 2018-10-08T14:15:04.616Z,1539008104.616 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T14:15:04.617Z,1539008104.617 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T14:17:38.677Z,1539008258.677 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:17:38.677Z,1539008258.677 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-10-08T14:17:38.677Z,1539008258.677 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:17:38.679Z,1539008258.679 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:17:38.679Z,1539008258.679 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-10-08T14:17:38.679Z,1539008258.679 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:17:38.693Z,1539008258.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:17:38.694Z,1539008258.694 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:17:39.086Z,1539008259.086 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:17:39.086Z,1539008259.086 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-10-08T14:17:39.087Z,1539008259.087 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:17:39.087Z,1539008259.087 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-10-08T14:17:39.487Z,1539008259.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:17:39.488Z,1539008259.488 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:17:39.489Z,1539008259.489 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:17:39.490Z,1539008259.490 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:17:39.491Z,1539008259.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:17:39.491Z,1539008259.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:20:07.506Z,1539008407.506 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T14:15:04.6Z 2018-10-08T14:20:07.506Z,1539008407.506 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T14:20:07.506Z,1539008407.506 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T14:20:12.467Z,1539008412.467 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0114.lzma 2018-10-08T14:20:12.847Z,1539008412.847 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T14:20:12.847Z,1539008412.847 [NAL9602] Data Fault, FailCount= 2 2018-10-08T14:20:12.847Z,1539008412.847 [NAL9602](ERROR): Data Fault 2018-10-08T14:20:12.931Z,1539008412.931 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T14:20:13.238Z,1539008413.238 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0114.lzma.bak 2018-10-08T14:20:13.238Z,1539008413.238 [DataOverHttps](INFO): SBD MOMSN=8613945 2018-10-08T14:20:13.244Z,1539008413.244 [NAL9602](INFO): Powering down 2018-10-08T14:20:14.588Z,1539008414.588 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T14:20:14.588Z,1539008414.588 [NAL9602] No Fault, FailCount= 2 2018-10-08T14:20:22.683Z,1539008422.683 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20181008T074106/Express0115.lzma 2018-10-08T14:20:23.440Z,1539008423.440 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0115.lzma.bak 2018-10-08T14:20:23.440Z,1539008423.440 [DataOverHttps](INFO): SBD MOMSN=8613947 2018-10-08T14:20:24.522Z,1539008424.522 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T14:20:24.522Z,1539008424.522 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T14:20:24.523Z,1539008424.523 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T14:20:39.862Z,1539008439.862 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:20:39.862Z,1539008439.862 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-10-08T14:20:39.862Z,1539008439.862 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:20:39.864Z,1539008439.864 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:20:39.864Z,1539008439.864 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-10-08T14:20:39.864Z,1539008439.864 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:20:39.889Z,1539008439.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:20:39.890Z,1539008439.890 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:20:40.324Z,1539008440.324 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:20:40.324Z,1539008440.324 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-10-08T14:20:40.341Z,1539008440.341 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:20:40.341Z,1539008440.341 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-10-08T14:20:40.779Z,1539008440.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:20:40.801Z,1539008440.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:20:40.801Z,1539008440.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:20:40.802Z,1539008440.802 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:20:40.802Z,1539008440.802 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:20:40.803Z,1539008440.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:20:43.413Z,1539008443.413 [NAL9602](INFO): Powering up NAL9602 2018-10-08T14:20:54.223Z,1539008454.223 [NAL9602](INFO): NAL9602 initialized 2018-10-08T14:23:40.790Z,1539008620.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:23:40.791Z,1539008620.791 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-10-08T14:23:40.791Z,1539008620.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:23:40.817Z,1539008620.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:23:41.202Z,1539008621.202 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:23:41.202Z,1539008621.202 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-10-08T14:23:41.202Z,1539008621.202 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:23:41.216Z,1539008621.216 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:23:41.216Z,1539008621.216 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-10-08T14:23:41.216Z,1539008621.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:23:41.594Z,1539008621.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:23:41.594Z,1539008621.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:23:41.595Z,1539008621.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:23:41.608Z,1539008621.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:23:41.608Z,1539008621.608 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-10-08T14:23:41.983Z,1539008621.983 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:23:41.983Z,1539008621.983 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:23:41.983Z,1539008621.983 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:25:24.669Z,1539008724.669 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T14:25:24.669Z,1539008724.669 [Default:CheckIn:C.Wait] Stopped 2018-10-08T14:25:24.669Z,1539008724.669 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T14:25:24.669Z,1539008724.669 [Default:CheckIn:D] Running Loop=1 2018-10-08T14:25:25.073Z,1539008725.073 [Default:CheckIn:D] Stopped 2018-10-08T14:25:25.074Z,1539008725.074 [Default:CheckIn:E] Running Loop=1 2018-10-08T14:25:25.471Z,1539008725.471 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 404.296745 min 2018-10-08T14:25:25.472Z,1539008725.472 [Default:CheckIn:E] Stopped 2018-10-08T14:25:25.472Z,1539008725.472 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T14:25:25.472Z,1539008725.472 [Default:CheckIn] Stopped 2018-10-08T14:25:25.472Z,1539008725.472 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T14:25:25.472Z,1539008725.472 [Default:CheckIn](INFO): Running loop #40 2018-10-08T14:25:25.472Z,1539008725.472 [Default:CheckIn] Running Loop=40 2018-10-08T14:25:25.472Z,1539008725.472 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T14:25:25.473Z,1539008725.473 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T14:26:41.882Z,1539008801.882 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:26:41.882Z,1539008801.882 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-10-08T14:26:41.882Z,1539008801.882 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:26:41.911Z,1539008801.911 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:26:42.303Z,1539008802.303 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:26:42.303Z,1539008802.303 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-10-08T14:26:42.303Z,1539008802.303 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:26:42.316Z,1539008802.316 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:26:42.316Z,1539008802.316 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-10-08T14:26:42.317Z,1539008802.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:26:42.702Z,1539008802.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:26:42.702Z,1539008802.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:26:42.703Z,1539008802.703 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:26:42.723Z,1539008802.723 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:26:42.723Z,1539008802.723 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-10-08T14:26:43.101Z,1539008803.101 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:26:43.102Z,1539008803.102 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:26:43.103Z,1539008803.103 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:29:42.952Z,1539008982.952 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:29:42.952Z,1539008982.952 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-10-08T14:29:42.952Z,1539008982.952 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:29:42.990Z,1539008982.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:29:43.391Z,1539008983.391 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:29:43.391Z,1539008983.391 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-10-08T14:29:43.391Z,1539008983.391 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:29:43.404Z,1539008983.404 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:29:43.404Z,1539008983.404 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-10-08T14:29:43.405Z,1539008983.405 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:29:43.777Z,1539008983.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:29:43.778Z,1539008983.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:29:43.778Z,1539008983.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:29:43.803Z,1539008983.803 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:29:43.803Z,1539008983.803 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-10-08T14:29:44.198Z,1539008984.198 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:29:44.198Z,1539008984.198 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:29:44.198Z,1539008984.198 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:30:28.290Z,1539009028.290 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T14:25:25.5Z 2018-10-08T14:30:28.290Z,1539009028.290 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T14:30:28.290Z,1539009028.290 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T14:30:33.296Z,1539009033.296 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0117.lzma 2018-10-08T14:30:34.083Z,1539009034.083 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0117.lzma.bak 2018-10-08T14:30:34.083Z,1539009034.083 [DataOverHttps](INFO): SBD MOMSN=8613953 2018-10-08T14:30:43.578Z,1539009043.578 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T074106/Express0118.lzma 2018-10-08T14:30:44.216Z,1539009044.216 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0118.lzma.bak 2018-10-08T14:30:44.216Z,1539009044.216 [DataOverHttps](INFO): SBD MOMSN=8613955 2018-10-08T14:30:45.306Z,1539009045.306 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T14:30:45.306Z,1539009045.306 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T14:30:45.306Z,1539009045.306 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T14:30:57.447Z,1539009057.447 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T14:30:57.448Z,1539009057.448 [NAL9602] Data Fault, FailCount= 3 2018-10-08T14:30:57.448Z,1539009057.448 [NAL9602](ERROR): Data Fault 2018-10-08T14:30:57.525Z,1539009057.525 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T14:30:57.835Z,1539009057.835 [NAL9602](INFO): Powering down 2018-10-08T14:30:58.884Z,1539009058.884 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T14:30:58.884Z,1539009058.884 [NAL9602] No Fault, FailCount= 3 2018-10-08T14:31:25.501Z,1539009085.501 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error 2018-10-08T14:31:25.501Z,1539009085.501 [RDI_Pathfinder](ERROR): Failed to parse: :TS,18100807362951,31, 0.0,1448.9, 0 2018-10-08T14:31:27.875Z,1539009087.875 [NAL9602](INFO): Powering up NAL9602 2018-10-08T14:31:39.069Z,1539009099.069 [NAL9602](INFO): NAL9602 initialized 2018-10-08T14:32:00.784Z,1539009120.784 [RDI_Pathfinder](ERROR): Failed to parse: :BE,-32768,-32768,-32768,V 2018-10-08T14:32:44.106Z,1539009164.106 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:32:44.106Z,1539009164.106 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-10-08T14:32:44.107Z,1539009164.107 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:32:44.156Z,1539009164.156 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:32:44.492Z,1539009164.492 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:32:44.492Z,1539009164.492 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-10-08T14:32:44.492Z,1539009164.492 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:32:44.510Z,1539009164.510 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:32:44.510Z,1539009164.510 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-10-08T14:32:44.511Z,1539009164.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:32:44.891Z,1539009164.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:32:44.892Z,1539009164.892 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:32:44.892Z,1539009164.892 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:32:44.910Z,1539009164.910 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:32:44.910Z,1539009164.910 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-10-08T14:32:45.291Z,1539009165.291 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:32:45.291Z,1539009165.291 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:32:45.291Z,1539009165.291 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:35:44.902Z,1539009344.902 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:35:44.902Z,1539009344.902 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-10-08T14:35:44.902Z,1539009344.902 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:35:44.925Z,1539009344.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:35:45.312Z,1539009345.312 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:35:45.312Z,1539009345.312 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-10-08T14:35:45.312Z,1539009345.312 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:35:45.337Z,1539009345.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:35:45.337Z,1539009345.337 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-10-08T14:35:45.338Z,1539009345.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:35:45.702Z,1539009345.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:35:45.702Z,1539009345.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:35:45.703Z,1539009345.703 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:35:45.704Z,1539009345.704 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T14:35:45.704Z,1539009345.704 [Default:CheckIn:C.Wait] Stopped 2018-10-08T14:35:45.705Z,1539009345.705 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T14:35:45.709Z,1539009345.709 [Default:CheckIn:D] Running Loop=1 2018-10-08T14:35:45.729Z,1539009345.729 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:35:45.733Z,1539009345.733 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-10-08T14:35:46.119Z,1539009346.119 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:35:46.120Z,1539009346.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:35:46.121Z,1539009346.121 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:35:46.128Z,1539009346.128 [Default:CheckIn:D] Stopped 2018-10-08T14:35:46.128Z,1539009346.128 [Default:CheckIn:E] Running Loop=1 2018-10-08T14:35:46.534Z,1539009346.534 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 414.647656 min 2018-10-08T14:35:46.535Z,1539009346.535 [Default:CheckIn:E] Stopped 2018-10-08T14:35:46.535Z,1539009346.535 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T14:35:46.535Z,1539009346.535 [Default:CheckIn] Stopped 2018-10-08T14:35:46.535Z,1539009346.535 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T14:35:46.535Z,1539009346.535 [Default:CheckIn](INFO): Running loop #41 2018-10-08T14:35:46.535Z,1539009346.535 [Default:CheckIn] Running Loop=41 2018-10-08T14:35:46.536Z,1539009346.536 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T14:35:46.536Z,1539009346.536 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T14:38:45.727Z,1539009525.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:38:45.727Z,1539009525.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-10-08T14:38:45.727Z,1539009525.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:38:45.758Z,1539009525.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:38:46.148Z,1539009526.148 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:38:46.148Z,1539009526.148 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-10-08T14:38:46.148Z,1539009526.148 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:38:46.169Z,1539009526.169 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:38:46.169Z,1539009526.169 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-10-08T14:38:46.170Z,1539009526.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:38:46.551Z,1539009526.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:38:46.552Z,1539009526.552 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:38:46.552Z,1539009526.552 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:38:46.574Z,1539009526.574 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:38:46.574Z,1539009526.574 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-10-08T14:38:46.939Z,1539009526.939 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:38:46.939Z,1539009526.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:38:46.940Z,1539009526.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:40:48.804Z,1539009648.804 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T14:35:46.5Z 2018-10-08T14:40:48.804Z,1539009648.804 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T14:40:48.804Z,1539009648.804 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T14:40:53.800Z,1539009653.800 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0120.lzma 2018-10-08T14:40:54.580Z,1539009654.580 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0120.lzma.bak 2018-10-08T14:40:54.580Z,1539009654.580 [DataOverHttps](INFO): SBD MOMSN=8613961 2018-10-08T14:41:03.942Z,1539009663.942 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T074106/Express0121.lzma 2018-10-08T14:41:04.704Z,1539009664.704 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0121.lzma.bak 2018-10-08T14:41:04.704Z,1539009664.704 [DataOverHttps](INFO): SBD MOMSN=8613963 2018-10-08T14:41:05.803Z,1539009665.803 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T14:41:05.803Z,1539009665.803 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T14:41:05.803Z,1539009665.803 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T14:41:40.339Z,1539009700.339 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T14:41:40.339Z,1539009700.339 [NAL9602] Data Fault, FailCount= 4 2018-10-08T14:41:40.339Z,1539009700.339 [NAL9602](ERROR): Data Fault 2018-10-08T14:41:40.412Z,1539009700.412 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T14:41:40.751Z,1539009700.751 [NAL9602](INFO): Powering down 2018-10-08T14:41:44.407Z,1539009704.407 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T14:41:44.407Z,1539009704.407 [NAL9602] No Fault, FailCount= 4 2018-10-08T14:41:46.871Z,1539009706.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:41:46.871Z,1539009706.871 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-10-08T14:41:46.871Z,1539009706.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:41:46.898Z,1539009706.898 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:41:47.291Z,1539009707.291 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:41:47.291Z,1539009707.291 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-10-08T14:41:47.292Z,1539009707.292 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:41:47.316Z,1539009707.316 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:41:47.316Z,1539009707.316 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-10-08T14:41:47.317Z,1539009707.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:41:47.664Z,1539009707.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:41:47.664Z,1539009707.664 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:41:47.665Z,1539009707.665 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:41:47.690Z,1539009707.690 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:41:47.690Z,1539009707.690 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-10-08T14:41:48.079Z,1539009708.079 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:41:48.079Z,1539009708.079 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:41:48.079Z,1539009708.079 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:42:10.835Z,1539009730.835 [NAL9602](INFO): Powering up NAL9602 2018-10-08T14:42:21.703Z,1539009741.703 [NAL9602](INFO): NAL9602 initialized 2018-10-08T14:44:47.791Z,1539009887.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:44:47.791Z,1539009887.791 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-10-08T14:44:47.791Z,1539009887.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:44:47.805Z,1539009887.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:44:48.160Z,1539009888.160 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:44:48.160Z,1539009888.160 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-10-08T14:44:48.160Z,1539009888.160 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:44:48.185Z,1539009888.185 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:44:48.185Z,1539009888.185 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-10-08T14:44:48.186Z,1539009888.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:44:48.597Z,1539009888.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:44:48.598Z,1539009888.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:44:48.598Z,1539009888.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:44:48.623Z,1539009888.623 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:44:48.623Z,1539009888.623 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-10-08T14:44:48.967Z,1539009888.967 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:44:48.967Z,1539009888.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:44:48.967Z,1539009888.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:46:06.073Z,1539009966.073 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T14:46:06.073Z,1539009966.073 [Default:CheckIn:C.Wait] Stopped 2018-10-08T14:46:06.073Z,1539009966.073 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T14:46:06.073Z,1539009966.073 [Default:CheckIn:D] Running Loop=1 2018-10-08T14:46:06.498Z,1539009966.498 [Default:CheckIn:D] Stopped 2018-10-08T14:46:06.498Z,1539009966.498 [Default:CheckIn:E] Running Loop=1 2018-10-08T14:46:06.873Z,1539009966.873 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 424.987174 min 2018-10-08T14:46:06.873Z,1539009966.873 [Default:CheckIn:E] Stopped 2018-10-08T14:46:06.874Z,1539009966.874 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T14:46:06.874Z,1539009966.874 [Default:CheckIn] Stopped 2018-10-08T14:46:06.874Z,1539009966.874 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T14:46:06.874Z,1539009966.874 [Default:CheckIn](INFO): Running loop #42 2018-10-08T14:46:06.874Z,1539009966.874 [Default:CheckIn] Running Loop=42 2018-10-08T14:46:06.874Z,1539009966.874 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T14:46:06.874Z,1539009966.874 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T14:47:48.883Z,1539010068.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:47:48.883Z,1539010068.883 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-10-08T14:47:48.883Z,1539010068.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:47:48.930Z,1539010068.930 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:47:49.291Z,1539010069.291 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:47:49.291Z,1539010069.291 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-10-08T14:47:49.291Z,1539010069.291 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:47:49.310Z,1539010069.310 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:47:49.310Z,1539010069.310 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-10-08T14:47:49.311Z,1539010069.311 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:47:49.698Z,1539010069.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:47:49.698Z,1539010069.698 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:47:49.699Z,1539010069.699 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:47:49.731Z,1539010069.731 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:47:49.731Z,1539010069.731 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-10-08T14:47:50.091Z,1539010070.091 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:47:50.091Z,1539010070.091 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:47:50.091Z,1539010070.091 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:48:13.381Z,1539010093.381 [RDI_Pathfinder](ERROR): Failed to parse: 2018-10-08T14:50:49.790Z,1539010249.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:50:49.790Z,1539010249.790 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-10-08T14:50:49.791Z,1539010249.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:50:49.819Z,1539010249.819 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:50:50.171Z,1539010250.171 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:50:50.171Z,1539010250.171 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-10-08T14:50:50.171Z,1539010250.171 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:50:50.193Z,1539010250.193 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:50:50.193Z,1539010250.193 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-10-08T14:50:50.195Z,1539010250.195 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:50:50.574Z,1539010250.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:50:50.574Z,1539010250.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:50:50.575Z,1539010250.575 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:50:50.600Z,1539010250.600 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:50:50.600Z,1539010250.600 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-10-08T14:50:50.955Z,1539010250.955 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:50:50.955Z,1539010250.955 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:50:50.955Z,1539010250.955 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:51:08.561Z,1539010268.561 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T14:46:06.9Z 2018-10-08T14:51:08.561Z,1539010268.561 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T14:51:08.561Z,1539010268.561 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T14:51:13.499Z,1539010273.499 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0123.lzma 2018-10-08T14:51:14.276Z,1539010274.276 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0123.lzma.bak 2018-10-08T14:51:14.276Z,1539010274.276 [DataOverHttps](INFO): SBD MOMSN=8613969 2018-10-08T14:51:26.459Z,1539010286.459 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0124.lzma 2018-10-08T14:51:27.213Z,1539010287.213 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0124.lzma.bak 2018-10-08T14:51:27.213Z,1539010287.213 [DataOverHttps](INFO): SBD MOMSN=8613971 2018-10-08T14:51:28.630Z,1539010288.630 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T14:51:28.630Z,1539010288.630 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T14:51:28.630Z,1539010288.630 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T14:52:22.899Z,1539010342.899 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T14:52:22.899Z,1539010342.899 [NAL9602] Data Fault, FailCount= 5 2018-10-08T14:52:22.899Z,1539010342.899 [NAL9602](ERROR): Data Fault 2018-10-08T14:52:22.969Z,1539010342.969 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T14:52:22.969Z,1539010342.969 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-10-08T14:52:23.303Z,1539010343.303 [NAL9602](INFO): Powering down 2018-10-08T14:52:23.383Z,1539010343.383 [CBIT](INFO): Critical error at 20181008T145222 2018-10-08T14:53:53.159Z,1539010433.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:53:53.160Z,1539010433.160 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-10-08T14:53:53.160Z,1539010433.160 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:53:53.162Z,1539010433.162 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:53:53.162Z,1539010433.162 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-10-08T14:53:53.162Z,1539010433.162 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:53:53.175Z,1539010433.175 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:53:53.175Z,1539010433.175 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:53:53.307Z,1539010433.307 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:53:53.307Z,1539010433.307 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-10-08T14:53:53.308Z,1539010433.308 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:53:53.308Z,1539010433.308 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-10-08T14:53:53.640Z,1539010433.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:53:53.640Z,1539010433.640 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:53:53.641Z,1539010433.641 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:53:53.641Z,1539010433.641 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:53:53.642Z,1539010433.642 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:53:53.642Z,1539010433.642 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:54:23.272Z,1539010463.272 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T14:54:23.273Z,1539010463.273 [NAL9602] No Fault, FailCount= 5 2018-10-08T14:54:23.595Z,1539010463.595 [NAL9602](INFO): Powering up NAL9602 2018-10-08T14:54:34.467Z,1539010474.467 [NAL9602](INFO): NAL9602 initialized 2018-10-08T14:56:28.769Z,1539010588.769 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T14:56:28.793Z,1539010588.793 [Default:CheckIn:C.Wait] Stopped 2018-10-08T14:56:28.793Z,1539010588.793 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T14:56:28.793Z,1539010588.793 [Default:CheckIn:D] Running Loop=1 2018-10-08T14:56:29.177Z,1539010589.177 [Default:CheckIn:D] Stopped 2018-10-08T14:56:29.181Z,1539010589.181 [Default:CheckIn:E] Running Loop=1 2018-10-08T14:56:29.637Z,1539010589.637 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 435.365137 min 2018-10-08T14:56:29.638Z,1539010589.638 [Default:CheckIn:E] Stopped 2018-10-08T14:56:29.638Z,1539010589.638 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T14:56:29.638Z,1539010589.638 [Default:CheckIn] Stopped 2018-10-08T14:56:29.638Z,1539010589.638 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T14:56:29.638Z,1539010589.638 [Default:CheckIn](INFO): Running loop #43 2018-10-08T14:56:29.638Z,1539010589.638 [Default:CheckIn] Running Loop=43 2018-10-08T14:56:29.638Z,1539010589.638 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T14:56:29.639Z,1539010589.639 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T14:56:53.995Z,1539010613.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:56:53.995Z,1539010613.995 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-10-08T14:56:53.995Z,1539010613.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:56:53.997Z,1539010613.997 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:56:53.997Z,1539010613.997 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-10-08T14:56:53.997Z,1539010613.997 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:56:54.023Z,1539010614.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:56:54.023Z,1539010614.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:56:54.426Z,1539010614.426 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:56:54.426Z,1539010614.426 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-10-08T14:56:54.427Z,1539010614.427 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:56:54.427Z,1539010614.427 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-10-08T14:56:54.804Z,1539010614.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:56:54.805Z,1539010614.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:56:54.805Z,1539010614.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:56:54.806Z,1539010614.806 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:56:54.806Z,1539010614.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:56:54.807Z,1539010614.807 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:59:01.144Z,1539010741.144 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude 2018-10-08T14:59:01.144Z,1539010741.144 [RDI_Pathfinder](ERROR): Failed to parse: :BD, +0.00, +0.0 +0.00, 0.00,36572.34 2018-10-08T14:59:54.971Z,1539010794.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:59:54.971Z,1539010794.971 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-10-08T14:59:54.971Z,1539010794.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T14:59:54.977Z,1539010794.977 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T14:59:54.977Z,1539010794.977 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-10-08T14:59:54.977Z,1539010794.977 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T14:59:55.003Z,1539010795.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T14:59:55.003Z,1539010795.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T14:59:55.410Z,1539010795.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T14:59:55.410Z,1539010795.410 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-10-08T14:59:55.411Z,1539010795.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T14:59:55.411Z,1539010795.411 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-10-08T14:59:55.770Z,1539010795.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T14:59:55.770Z,1539010795.770 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:59:55.771Z,1539010795.771 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T14:59:55.771Z,1539010795.771 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T14:59:55.771Z,1539010795.771 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T14:59:55.772Z,1539010795.772 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:01:32.355Z,1539010892.355 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T14:56:29.6Z 2018-10-08T15:01:32.355Z,1539010892.355 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T15:01:32.355Z,1539010892.355 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T15:01:41.131Z,1539010901.131 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181008T074106/Courier0126.lzma 2018-10-08T15:01:41.850Z,1539010901.850 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0126.lzma.bak 2018-10-08T15:01:41.850Z,1539010901.850 [DataOverHttps](INFO): SBD MOMSN=8613977 2018-10-08T15:01:51.669Z,1539010911.669 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181008T074106/Express0127.lzma 2018-10-08T15:01:52.444Z,1539010912.444 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0127.lzma.bak 2018-10-08T15:01:52.444Z,1539010912.444 [DataOverHttps](INFO): SBD MOMSN=8613979 2018-10-08T15:01:53.535Z,1539010913.535 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T15:01:53.535Z,1539010913.535 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T15:01:53.536Z,1539010913.536 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T15:02:55.815Z,1539010975.815 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:02:55.815Z,1539010975.815 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-10-08T15:02:55.815Z,1539010975.815 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:02:55.821Z,1539010975.821 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:02:55.821Z,1539010975.821 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-10-08T15:02:55.821Z,1539010975.821 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:02:55.851Z,1539010975.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:02:55.851Z,1539010975.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:02:56.257Z,1539010976.257 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:02:56.257Z,1539010976.257 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-10-08T15:02:56.258Z,1539010976.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:02:56.258Z,1539010976.258 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-10-08T15:02:56.598Z,1539010976.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:02:56.598Z,1539010976.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:02:56.599Z,1539010976.599 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:02:56.599Z,1539010976.599 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:02:56.599Z,1539010976.599 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:02:56.600Z,1539010976.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:04:36.147Z,1539011076.147 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T15:04:36.147Z,1539011076.147 [NAL9602] Data Fault, FailCount= 1 2018-10-08T15:04:36.147Z,1539011076.147 [NAL9602](ERROR): Data Fault 2018-10-08T15:04:36.354Z,1539011076.354 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T15:04:36.543Z,1539011076.543 [NAL9602](INFO): Powering down 2018-10-08T15:04:37.440Z,1539011077.440 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T15:04:37.440Z,1539011077.440 [NAL9602] No Fault, FailCount= 1 2018-10-08T15:05:02.295Z,1539011102.295 [RDI_Pathfinder](ERROR): Failed to parse: 2018-10-08T15:05:06.655Z,1539011106.655 [NAL9602](INFO): Powering up NAL9602 2018-10-08T15:05:17.859Z,1539011117.859 [NAL9602](INFO): NAL9602 initialized 2018-10-08T15:05:56.795Z,1539011156.795 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:05:56.795Z,1539011156.795 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-10-08T15:05:56.795Z,1539011156.795 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:05:56.801Z,1539011156.801 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:05:56.802Z,1539011156.802 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-10-08T15:05:56.802Z,1539011156.802 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:05:56.825Z,1539011156.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:05:56.826Z,1539011156.826 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:05:57.252Z,1539011157.252 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:05:57.252Z,1539011157.252 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-10-08T15:05:57.252Z,1539011157.252 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:05:57.252Z,1539011157.252 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-10-08T15:05:57.670Z,1539011157.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:05:57.670Z,1539011157.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:05:57.671Z,1539011157.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:05:57.671Z,1539011157.671 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:05:57.671Z,1539011157.671 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:05:57.672Z,1539011157.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:06:53.678Z,1539011213.678 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T15:06:53.678Z,1539011213.678 [Default:CheckIn:C.Wait] Stopped 2018-10-08T15:06:53.678Z,1539011213.678 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T15:06:53.678Z,1539011213.678 [Default:CheckIn:D] Running Loop=1 2018-10-08T15:06:54.085Z,1539011214.085 [Default:CheckIn:D] Stopped 2018-10-08T15:06:54.085Z,1539011214.085 [Default:CheckIn:E] Running Loop=1 2018-10-08T15:06:54.466Z,1539011214.466 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 445.780273 min 2018-10-08T15:06:54.466Z,1539011214.466 [Default:CheckIn:E] Stopped 2018-10-08T15:06:54.467Z,1539011214.467 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T15:06:54.467Z,1539011214.467 [Default:CheckIn] Stopped 2018-10-08T15:06:54.467Z,1539011214.467 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T15:06:54.467Z,1539011214.467 [Default:CheckIn](INFO): Running loop #44 2018-10-08T15:06:54.467Z,1539011214.467 [Default:CheckIn] Running Loop=44 2018-10-08T15:06:54.467Z,1539011214.467 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T15:06:54.467Z,1539011214.467 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T15:09:00.507Z,1539011340.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:09:00.507Z,1539011340.507 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-10-08T15:09:00.507Z,1539011340.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:09:00.509Z,1539011340.509 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:09:00.510Z,1539011340.510 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-10-08T15:09:00.510Z,1539011340.510 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:09:00.522Z,1539011340.522 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:09:00.523Z,1539011340.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:09:00.646Z,1539011340.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:09:00.646Z,1539011340.646 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-10-08T15:09:00.647Z,1539011340.647 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:09:00.647Z,1539011340.647 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-10-08T15:09:00.982Z,1539011340.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:09:00.982Z,1539011340.982 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:09:00.983Z,1539011340.983 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:09:00.983Z,1539011340.983 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:09:00.983Z,1539011340.983 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:09:00.984Z,1539011340.984 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:09:31.783Z,1539011371.783 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-10-08T15:10:12.373Z,1539011412.373 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T15:11:57.382Z,1539011517.382 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T15:06:54.5Z 2018-10-08T15:11:57.382Z,1539011517.382 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T15:11:57.383Z,1539011517.383 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T15:12:02.283Z,1539011522.283 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:12:02.283Z,1539011522.283 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-10-08T15:12:02.283Z,1539011522.283 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:12:02.285Z,1539011522.285 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:12:02.285Z,1539011522.285 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-10-08T15:12:02.285Z,1539011522.285 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:12:02.318Z,1539011522.318 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:12:02.319Z,1539011522.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:12:02.358Z,1539011522.358 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181008T074106/Courier0129.lzma 2018-10-08T15:12:02.443Z,1539011522.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:12:02.443Z,1539011522.443 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-10-08T15:12:02.444Z,1539011522.444 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:12:02.444Z,1539011522.444 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-10-08T15:12:02.796Z,1539011522.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:12:02.801Z,1539011522.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:12:02.801Z,1539011522.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:12:02.802Z,1539011522.802 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:12:02.802Z,1539011522.802 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:12:02.802Z,1539011522.802 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:12:03.132Z,1539011523.132 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0129.lzma.bak 2018-10-08T15:12:03.133Z,1539011523.133 [DataOverHttps](INFO): SBD MOMSN=8613985 2018-10-08T15:12:12.665Z,1539011532.665 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0130.lzma 2018-10-08T15:12:13.412Z,1539011533.412 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0130.lzma.bak 2018-10-08T15:12:13.412Z,1539011533.412 [DataOverHttps](INFO): SBD MOMSN=8613987 2018-10-08T15:12:14.511Z,1539011534.511 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T15:12:14.511Z,1539011534.511 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T15:12:14.511Z,1539011534.511 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T15:14:54.480Z,1539011694.480 [RDI_Pathfinder](ERROR): only read 1 of 5 data items 2018-10-08T15:14:54.480Z,1539011694.480 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768-32768,-32768,V 2018-10-08T15:15:02.860Z,1539011702.860 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:15:02.860Z,1539011702.860 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-10-08T15:15:02.860Z,1539011702.860 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:15:02.862Z,1539011702.862 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:15:02.862Z,1539011702.862 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-10-08T15:15:02.863Z,1539011702.863 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:15:02.900Z,1539011702.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:15:02.900Z,1539011702.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:15:03.307Z,1539011703.307 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:15:03.307Z,1539011703.307 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-10-08T15:15:03.307Z,1539011703.307 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:15:03.308Z,1539011703.308 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-10-08T15:15:03.662Z,1539011703.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:15:03.662Z,1539011703.662 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:15:03.663Z,1539011703.663 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:15:03.663Z,1539011703.663 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:15:03.664Z,1539011703.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:15:03.664Z,1539011703.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:15:20.501Z,1539011720.501 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T15:15:20.501Z,1539011720.501 [NAL9602] Data Fault, FailCount= 2 2018-10-08T15:15:20.502Z,1539011720.502 [NAL9602](ERROR): Data Fault 2018-10-08T15:15:20.585Z,1539011720.585 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T15:15:20.919Z,1539011720.919 [NAL9602](INFO): Powering down 2018-10-08T15:15:21.765Z,1539011721.765 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T15:15:21.765Z,1539011721.765 [NAL9602] No Fault, FailCount= 2 2018-10-08T15:15:51.011Z,1539011751.011 [NAL9602](INFO): Powering up NAL9602 2018-10-08T15:16:01.811Z,1539011761.811 [NAL9602](INFO): NAL9602 initialized 2018-10-08T15:17:15.038Z,1539011835.038 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T15:17:15.038Z,1539011835.038 [Default:CheckIn:C.Wait] Stopped 2018-10-08T15:17:15.038Z,1539011835.038 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T15:17:15.039Z,1539011835.039 [Default:CheckIn:D] Running Loop=1 2018-10-08T15:17:15.425Z,1539011835.425 [Default:CheckIn:D] Stopped 2018-10-08T15:17:15.425Z,1539011835.425 [Default:CheckIn:E] Running Loop=1 2018-10-08T15:17:15.815Z,1539011835.815 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 456.135938 min 2018-10-08T15:17:15.815Z,1539011835.815 [Default:CheckIn:E] Stopped 2018-10-08T15:17:15.816Z,1539011835.816 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T15:17:15.816Z,1539011835.816 [Default:CheckIn] Stopped 2018-10-08T15:17:15.816Z,1539011835.816 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T15:17:15.816Z,1539011835.816 [Default:CheckIn](INFO): Running loop #45 2018-10-08T15:17:15.816Z,1539011835.816 [Default:CheckIn] Running Loop=45 2018-10-08T15:17:15.816Z,1539011835.816 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T15:17:15.816Z,1539011835.816 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T15:18:03.884Z,1539011883.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:18:03.884Z,1539011883.884 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-10-08T15:18:03.884Z,1539011883.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:18:03.886Z,1539011883.886 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:18:03.886Z,1539011883.886 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-10-08T15:18:03.886Z,1539011883.886 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:18:03.913Z,1539011883.913 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:18:03.914Z,1539011883.914 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:18:04.324Z,1539011884.324 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:18:04.324Z,1539011884.324 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-10-08T15:18:04.330Z,1539011884.330 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:18:04.330Z,1539011884.330 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-10-08T15:18:04.694Z,1539011884.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:18:04.694Z,1539011884.694 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:18:04.694Z,1539011884.694 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:18:04.695Z,1539011884.695 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:18:04.695Z,1539011884.695 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:18:04.696Z,1539011884.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:21:07.217Z,1539012067.217 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:21:07.217Z,1539012067.217 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-10-08T15:21:07.218Z,1539012067.218 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:21:07.219Z,1539012067.219 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:21:07.220Z,1539012067.220 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-10-08T15:21:07.220Z,1539012067.220 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:21:07.253Z,1539012067.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:21:07.253Z,1539012067.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:21:07.386Z,1539012067.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:21:07.386Z,1539012067.386 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-10-08T15:21:07.387Z,1539012067.387 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:21:07.387Z,1539012067.387 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-10-08T15:21:07.728Z,1539012067.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:21:07.728Z,1539012067.728 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:21:07.729Z,1539012067.729 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:21:07.729Z,1539012067.729 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:21:07.730Z,1539012067.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:21:07.730Z,1539012067.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:22:17.833Z,1539012137.833 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T15:17:15.8Z 2018-10-08T15:22:17.834Z,1539012137.834 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T15:22:17.834Z,1539012137.834 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T15:22:22.814Z,1539012142.814 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0132.lzma 2018-10-08T15:22:23.572Z,1539012143.572 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0132.lzma.bak 2018-10-08T15:22:23.572Z,1539012143.572 [DataOverHttps](INFO): SBD MOMSN=8613993 2018-10-08T15:22:32.853Z,1539012152.853 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0133.lzma 2018-10-08T15:22:40.101Z,1539012160.101 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0133.lzma.bak 2018-10-08T15:22:40.101Z,1539012160.101 [DataOverHttps](INFO): SBD MOMSN=8613995 2018-10-08T15:22:41.138Z,1539012161.138 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T15:22:41.138Z,1539012161.138 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T15:22:41.138Z,1539012161.138 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T15:24:07.874Z,1539012247.874 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:24:07.874Z,1539012247.874 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-10-08T15:24:07.875Z,1539012247.875 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:24:07.876Z,1539012247.876 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:24:07.876Z,1539012247.876 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-10-08T15:24:07.877Z,1539012247.877 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:24:07.907Z,1539012247.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:24:07.907Z,1539012247.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:24:08.328Z,1539012248.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:24:08.328Z,1539012248.328 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-10-08T15:24:08.328Z,1539012248.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:24:08.329Z,1539012248.329 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-10-08T15:24:08.674Z,1539012248.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:24:08.675Z,1539012248.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:24:08.675Z,1539012248.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:24:08.675Z,1539012248.675 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:24:08.676Z,1539012248.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:24:08.676Z,1539012248.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:26:04.539Z,1539012364.539 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T15:26:04.539Z,1539012364.539 [NAL9602] Data Fault, FailCount= 3 2018-10-08T15:26:04.539Z,1539012364.539 [NAL9602](ERROR): Data Fault 2018-10-08T15:26:04.611Z,1539012364.611 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T15:26:04.939Z,1539012364.939 [NAL9602](INFO): Powering down 2018-10-08T15:26:05.796Z,1539012365.796 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T15:26:05.796Z,1539012365.796 [NAL9602] No Fault, FailCount= 3 2018-10-08T15:26:19.425Z,1539012379.425 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error 2018-10-08T15:26:19.425Z,1539012379.425 [RDI_Pathfinder](ERROR): Failed to parse: :TS,18100808312351,35.0, -0.1, 0.0,144 2018-10-08T15:26:34.971Z,1539012394.971 [NAL9602](INFO): Powering up NAL9602 2018-10-08T15:26:46.171Z,1539012406.171 [NAL9602](INFO): NAL9602 initialized 2018-10-08T15:27:08.719Z,1539012428.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:27:08.719Z,1539012428.719 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-10-08T15:27:08.719Z,1539012428.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:27:08.725Z,1539012428.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:27:08.725Z,1539012428.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-10-08T15:27:08.725Z,1539012428.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:27:08.759Z,1539012428.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:27:08.759Z,1539012428.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:27:09.124Z,1539012429.124 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:27:09.124Z,1539012429.124 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-10-08T15:27:09.130Z,1539012429.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:27:09.130Z,1539012429.130 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-10-08T15:27:09.508Z,1539012429.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:27:09.509Z,1539012429.509 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:27:09.509Z,1539012429.509 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:27:09.510Z,1539012429.510 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:27:09.510Z,1539012429.510 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:27:09.510Z,1539012429.510 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:27:41.596Z,1539012461.596 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T15:27:41.597Z,1539012461.597 [Default:CheckIn:C.Wait] Stopped 2018-10-08T15:27:41.597Z,1539012461.597 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T15:27:41.598Z,1539012461.598 [Default:CheckIn:D] Running Loop=1 2018-10-08T15:27:41.997Z,1539012461.997 [Default:CheckIn:D] Stopped 2018-10-08T15:27:41.997Z,1539012461.997 [Default:CheckIn:E] Running Loop=1 2018-10-08T15:27:42.409Z,1539012462.409 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 466.578809 min 2018-10-08T15:27:42.417Z,1539012462.417 [Default:CheckIn:E] Stopped 2018-10-08T15:27:42.417Z,1539012462.417 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T15:27:42.417Z,1539012462.417 [Default:CheckIn] Stopped 2018-10-08T15:27:42.418Z,1539012462.418 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T15:27:42.418Z,1539012462.418 [Default:CheckIn](INFO): Running loop #46 2018-10-08T15:27:42.418Z,1539012462.418 [Default:CheckIn] Running Loop=46 2018-10-08T15:27:42.418Z,1539012462.418 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T15:27:42.418Z,1539012462.418 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T15:30:09.733Z,1539012609.733 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:30:09.733Z,1539012609.733 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-10-08T15:30:09.733Z,1539012609.733 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:30:09.735Z,1539012609.735 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:30:09.735Z,1539012609.735 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-10-08T15:30:09.735Z,1539012609.735 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:30:09.756Z,1539012609.756 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:30:09.756Z,1539012609.756 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:30:10.128Z,1539012610.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:30:10.128Z,1539012610.128 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-10-08T15:30:10.145Z,1539012610.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:30:10.145Z,1539012610.145 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-10-08T15:30:10.529Z,1539012610.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:30:10.529Z,1539012610.529 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:30:10.530Z,1539012610.530 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:30:10.530Z,1539012610.530 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:30:10.530Z,1539012610.530 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:30:10.531Z,1539012610.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:31:38.403Z,1539012698.403 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T15:32:44.523Z,1539012764.523 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T15:27:42.4Z 2018-10-08T15:32:44.523Z,1539012764.523 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T15:32:44.523Z,1539012764.523 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T15:32:49.503Z,1539012769.503 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0135.lzma 2018-10-08T15:32:50.284Z,1539012770.284 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0135.lzma.bak 2018-10-08T15:32:50.284Z,1539012770.284 [DataOverHttps](INFO): SBD MOMSN=8614001 2018-10-08T15:32:59.620Z,1539012779.620 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0136.lzma 2018-10-08T15:33:00.397Z,1539012780.397 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0136.lzma.bak 2018-10-08T15:33:00.398Z,1539012780.398 [DataOverHttps](INFO): SBD MOMSN=8614003 2018-10-08T15:33:01.490Z,1539012781.490 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T15:33:01.490Z,1539012781.490 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T15:33:01.490Z,1539012781.490 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T15:33:10.859Z,1539012790.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:33:10.859Z,1539012790.859 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-10-08T15:33:10.859Z,1539012790.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:33:10.865Z,1539012790.865 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:33:10.865Z,1539012790.865 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-10-08T15:33:10.865Z,1539012790.865 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:33:10.891Z,1539012790.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:33:10.891Z,1539012790.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:33:11.301Z,1539012791.301 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:33:11.301Z,1539012791.301 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-10-08T15:33:11.302Z,1539012791.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:33:11.302Z,1539012791.302 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-10-08T15:33:11.662Z,1539012791.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:33:11.662Z,1539012791.662 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:33:11.663Z,1539012791.663 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:33:11.663Z,1539012791.663 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:33:11.663Z,1539012791.663 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:33:11.664Z,1539012791.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:34:38.632Z,1539012878.632 [RDI_Pathfinder](ERROR): Failed to parse: :HM,G,D,0e8c,0ffd,*15.900,*-0.006,*0.000 2018-10-08T15:34:52.344Z,1539012892.344 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T15:36:11.759Z,1539012971.759 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:36:11.759Z,1539012971.759 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-10-08T15:36:11.759Z,1539012971.759 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:36:11.765Z,1539012971.765 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:36:11.765Z,1539012971.765 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-10-08T15:36:11.765Z,1539012971.765 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:36:11.799Z,1539012971.799 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:36:11.799Z,1539012971.799 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:36:12.200Z,1539012972.200 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:36:12.201Z,1539012972.201 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-10-08T15:36:12.201Z,1539012972.201 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:36:12.201Z,1539012972.201 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-10-08T15:36:12.561Z,1539012972.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:36:12.561Z,1539012972.561 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:36:12.562Z,1539012972.562 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:36:12.562Z,1539012972.562 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:36:12.562Z,1539012972.562 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:36:12.563Z,1539012972.563 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:36:49.415Z,1539013009.415 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T15:36:49.415Z,1539013009.415 [NAL9602] Data Fault, FailCount= 4 2018-10-08T15:36:49.415Z,1539013009.415 [NAL9602](ERROR): Data Fault 2018-10-08T15:36:49.489Z,1539013009.489 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T15:36:49.799Z,1539013009.799 [NAL9602](INFO): Powering down 2018-10-08T15:36:50.670Z,1539013010.670 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T15:36:50.670Z,1539013010.670 [NAL9602] No Fault, FailCount= 4 2018-10-08T15:37:19.871Z,1539013039.871 [NAL9602](INFO): Powering up NAL9602 2018-10-08T15:37:31.071Z,1539013051.071 [NAL9602](INFO): NAL9602 initialized 2018-10-08T15:38:01.631Z,1539013081.631 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T15:38:01.632Z,1539013081.632 [Default:CheckIn:C.Wait] Stopped 2018-10-08T15:38:01.632Z,1539013081.632 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T15:38:01.632Z,1539013081.632 [Default:CheckIn:D] Running Loop=1 2018-10-08T15:38:02.030Z,1539013082.030 [Default:CheckIn:D] Stopped 2018-10-08T15:38:02.030Z,1539013082.030 [Default:CheckIn:E] Running Loop=1 2018-10-08T15:38:02.423Z,1539013082.423 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 476.912598 min 2018-10-08T15:38:02.424Z,1539013082.424 [Default:CheckIn:E] Stopped 2018-10-08T15:38:02.424Z,1539013082.424 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T15:38:02.424Z,1539013082.424 [Default:CheckIn] Stopped 2018-10-08T15:38:02.424Z,1539013082.424 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T15:38:02.424Z,1539013082.424 [Default:CheckIn](INFO): Running loop #47 2018-10-08T15:38:02.424Z,1539013082.424 [Default:CheckIn] Running Loop=47 2018-10-08T15:38:02.424Z,1539013082.424 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T15:38:02.425Z,1539013082.425 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T15:39:12.943Z,1539013152.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:39:12.943Z,1539013152.943 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-10-08T15:39:12.943Z,1539013152.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:39:12.945Z,1539013152.945 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:39:12.945Z,1539013152.945 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-10-08T15:39:12.945Z,1539013152.945 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:39:12.958Z,1539013152.958 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:39:12.958Z,1539013152.958 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:39:13.384Z,1539013153.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:39:13.384Z,1539013153.384 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-10-08T15:39:13.389Z,1539013153.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:39:13.389Z,1539013153.389 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-10-08T15:39:13.758Z,1539013153.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:39:13.758Z,1539013153.758 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:39:13.759Z,1539013153.759 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:39:13.759Z,1539013153.759 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:39:13.760Z,1539013153.760 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:39:13.760Z,1539013153.760 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:39:38.607Z,1539013178.607 [RDI_Pathfinder](ERROR): only read 3 of 5 data items 2018-10-08T15:39:38.608Z,1539013178.608 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-3278,-32768,V 2018-10-08T15:42:13.769Z,1539013333.769 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:42:13.769Z,1539013333.769 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-10-08T15:42:13.770Z,1539013333.770 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:42:13.771Z,1539013333.771 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:42:13.772Z,1539013333.772 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-10-08T15:42:13.772Z,1539013333.772 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:42:13.793Z,1539013333.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:42:13.794Z,1539013333.794 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:42:14.195Z,1539013334.195 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:42:14.195Z,1539013334.195 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-10-08T15:42:14.196Z,1539013334.196 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:42:14.196Z,1539013334.196 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-10-08T15:42:14.554Z,1539013334.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:42:14.554Z,1539013334.554 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:42:14.554Z,1539013334.554 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:42:14.555Z,1539013334.555 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:42:14.555Z,1539013334.555 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:42:14.556Z,1539013334.556 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:43:05.139Z,1539013385.139 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T15:38:02.4Z 2018-10-08T15:43:05.139Z,1539013385.139 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T15:43:05.139Z,1539013385.139 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T15:43:10.114Z,1539013390.114 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0138.lzma 2018-10-08T15:43:10.880Z,1539013390.880 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0138.lzma.bak 2018-10-08T15:43:10.880Z,1539013390.880 [DataOverHttps](INFO): SBD MOMSN=8614014 2018-10-08T15:43:20.147Z,1539013400.147 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0139.lzma 2018-10-08T15:43:20.920Z,1539013400.920 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0139.lzma.bak 2018-10-08T15:43:20.920Z,1539013400.920 [DataOverHttps](INFO): SBD MOMSN=8614016 2018-10-08T15:43:21.991Z,1539013401.991 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T15:43:21.991Z,1539013401.991 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T15:43:21.991Z,1539013401.991 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T15:44:02.348Z,1539013442.348 [RDI_Pathfinder](ERROR): Failed to parse: :BD, +0.00, +0.00, +0.00, 0.00,39261.80 2018-10-08T15:44:42.431Z,1539013482.431 [RDI_Pathfinder](ERROR): only read 3 of 5 data items 2018-10-08T15:44:42.431Z,1539013482.431 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-3768,V 2018-10-08T15:45:14.627Z,1539013514.627 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:45:14.627Z,1539013514.627 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-10-08T15:45:14.627Z,1539013514.627 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:45:14.633Z,1539013514.633 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:45:14.633Z,1539013514.633 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-10-08T15:45:14.633Z,1539013514.633 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:45:14.655Z,1539013514.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:45:14.655Z,1539013514.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:45:15.048Z,1539013515.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:45:15.049Z,1539013515.049 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-10-08T15:45:15.050Z,1539013515.050 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:45:15.050Z,1539013515.050 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-10-08T15:45:15.429Z,1539013515.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:45:15.430Z,1539013515.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:45:15.430Z,1539013515.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:45:15.431Z,1539013515.431 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:45:15.431Z,1539013515.431 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:45:15.431Z,1539013515.431 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:47:32.270Z,1539013652.270 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T15:47:32.270Z,1539013652.270 [NAL9602] Data Fault, FailCount= 5 2018-10-08T15:47:32.271Z,1539013652.271 [NAL9602](ERROR): Data Fault 2018-10-08T15:47:32.362Z,1539013652.362 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T15:47:32.362Z,1539013652.362 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-10-08T15:47:32.431Z,1539013652.431 [NAL9602](INFO): Powering down 2018-10-08T15:47:32.484Z,1539013652.484 [CBIT](INFO): Critical error at 20181008T154732 2018-10-08T15:48:15.683Z,1539013695.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:48:15.683Z,1539013695.683 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-10-08T15:48:15.683Z,1539013695.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:48:15.685Z,1539013695.685 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:48:15.685Z,1539013695.685 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-10-08T15:48:15.685Z,1539013695.685 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:48:15.708Z,1539013695.708 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:48:15.708Z,1539013695.708 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:48:16.126Z,1539013696.126 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:48:16.126Z,1539013696.126 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-10-08T15:48:16.127Z,1539013696.127 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:48:16.127Z,1539013696.127 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-10-08T15:48:16.482Z,1539013696.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:48:16.482Z,1539013696.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:48:16.483Z,1539013696.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:48:16.483Z,1539013696.483 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:48:16.484Z,1539013696.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:48:16.484Z,1539013696.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:48:22.477Z,1539013702.477 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T15:48:22.481Z,1539013702.481 [Default:CheckIn:C.Wait] Stopped 2018-10-08T15:48:22.481Z,1539013702.481 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T15:48:22.481Z,1539013702.481 [Default:CheckIn:D] Running Loop=1 2018-10-08T15:48:22.886Z,1539013702.886 [Default:CheckIn:D] Stopped 2018-10-08T15:48:22.886Z,1539013702.886 [Default:CheckIn:E] Running Loop=1 2018-10-08T15:48:23.301Z,1539013703.301 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 487.260286 min 2018-10-08T15:48:23.309Z,1539013703.309 [Default:CheckIn:E] Stopped 2018-10-08T15:48:23.309Z,1539013703.309 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T15:48:23.309Z,1539013703.309 [Default:CheckIn] Stopped 2018-10-08T15:48:23.309Z,1539013703.309 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T15:48:23.310Z,1539013703.310 [Default:CheckIn](INFO): Running loop #48 2018-10-08T15:48:23.310Z,1539013703.310 [Default:CheckIn] Running Loop=48 2018-10-08T15:48:23.310Z,1539013703.310 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T15:48:23.310Z,1539013703.310 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T15:49:32.296Z,1539013772.296 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T15:49:32.296Z,1539013772.296 [NAL9602] No Fault, FailCount= 5 2018-10-08T15:49:32.631Z,1539013772.631 [NAL9602](INFO): Powering up NAL9602 2018-10-08T15:49:43.831Z,1539013783.831 [NAL9602](INFO): NAL9602 initialized 2018-10-08T15:51:16.559Z,1539013876.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:51:16.559Z,1539013876.559 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-10-08T15:51:16.559Z,1539013876.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:51:16.561Z,1539013876.561 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:51:16.561Z,1539013876.561 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-10-08T15:51:16.561Z,1539013876.561 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:51:16.574Z,1539013876.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:51:16.575Z,1539013876.575 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:51:16.977Z,1539013876.977 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:51:16.977Z,1539013876.977 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-10-08T15:51:16.978Z,1539013876.978 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:51:16.978Z,1539013876.978 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-10-08T15:51:17.371Z,1539013877.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:51:17.371Z,1539013877.371 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:51:17.372Z,1539013877.372 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:51:17.372Z,1539013877.372 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:51:17.372Z,1539013877.372 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:51:17.373Z,1539013877.373 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:53:25.235Z,1539014005.235 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T15:48:23.3Z 2018-10-08T15:53:25.235Z,1539014005.235 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T15:53:25.235Z,1539014005.235 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T15:53:30.156Z,1539014010.156 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181008T074106/Courier0141.lzma 2018-10-08T15:53:30.951Z,1539014010.951 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0141.lzma.bak 2018-10-08T15:53:30.951Z,1539014010.951 [DataOverHttps](INFO): SBD MOMSN=8614022 2018-10-08T15:53:35.294Z,1539014015.294 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T15:53:40.261Z,1539014020.261 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0142.lzma 2018-10-08T15:53:41.046Z,1539014021.046 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0142.lzma.bak 2018-10-08T15:53:41.046Z,1539014021.046 [DataOverHttps](INFO): SBD MOMSN=8614024 2018-10-08T15:53:42.150Z,1539014022.150 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T15:53:42.150Z,1539014022.150 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T15:53:42.150Z,1539014022.150 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T15:54:17.575Z,1539014057.575 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:54:17.575Z,1539014057.575 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-10-08T15:54:17.575Z,1539014057.575 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:54:17.577Z,1539014057.577 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:54:17.577Z,1539014057.577 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-10-08T15:54:17.577Z,1539014057.577 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:54:17.600Z,1539014057.600 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:54:17.600Z,1539014057.600 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:54:20.796Z,1539014060.796 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:54:20.796Z,1539014060.796 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-10-08T15:54:20.797Z,1539014060.797 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:54:20.797Z,1539014060.797 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-10-08T15:54:20.913Z,1539014060.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:54:20.914Z,1539014060.914 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:54:20.914Z,1539014060.914 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:54:20.914Z,1539014060.914 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:54:20.915Z,1539014060.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:54:20.915Z,1539014060.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:56:10.745Z,1539014170.745 [RDI_Pathfinder](ERROR): Failed to parse: :HM,G,D,0e8c,0ffd,*15.894,*-0.004,*0.000 2018-10-08T15:57:20.937Z,1539014240.937 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:57:20.938Z,1539014240.938 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-10-08T15:57:20.938Z,1539014240.938 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T15:57:20.939Z,1539014240.939 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T15:57:20.940Z,1539014240.940 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-10-08T15:57:20.940Z,1539014240.940 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T15:57:20.969Z,1539014240.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T15:57:20.970Z,1539014240.970 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T15:57:21.374Z,1539014241.374 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T15:57:21.374Z,1539014241.374 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-10-08T15:57:21.374Z,1539014241.374 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T15:57:21.374Z,1539014241.374 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-10-08T15:57:21.738Z,1539014241.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T15:57:21.738Z,1539014241.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:57:21.739Z,1539014241.739 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:57:21.739Z,1539014241.739 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T15:57:21.740Z,1539014241.740 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T15:57:21.740Z,1539014241.740 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T15:58:42.322Z,1539014322.322 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T15:58:42.323Z,1539014322.323 [Default:CheckIn:C.Wait] Stopped 2018-10-08T15:58:42.323Z,1539014322.323 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T15:58:42.323Z,1539014322.323 [Default:CheckIn:D] Running Loop=1 2018-10-08T15:58:42.717Z,1539014322.717 [Default:CheckIn:D] Stopped 2018-10-08T15:58:42.717Z,1539014322.717 [Default:CheckIn:E] Running Loop=1 2018-10-08T15:58:43.154Z,1539014323.154 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 497.590820 min 2018-10-08T15:58:43.154Z,1539014323.154 [Default:CheckIn:E] Stopped 2018-10-08T15:58:43.154Z,1539014323.154 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T15:58:43.154Z,1539014323.154 [Default:CheckIn] Stopped 2018-10-08T15:58:43.155Z,1539014323.155 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T15:58:43.155Z,1539014323.155 [Default:CheckIn](INFO): Running loop #49 2018-10-08T15:58:43.155Z,1539014323.155 [Default:CheckIn] Running Loop=49 2018-10-08T15:58:43.155Z,1539014323.155 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T15:58:43.155Z,1539014323.155 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T15:59:44.907Z,1539014384.907 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T15:59:44.907Z,1539014384.907 [NAL9602] Data Fault, FailCount= 1 2018-10-08T15:59:44.907Z,1539014384.907 [NAL9602](ERROR): Data Fault 2018-10-08T15:59:44.999Z,1539014384.999 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T15:59:45.307Z,1539014385.307 [NAL9602](INFO): Powering down 2018-10-08T15:59:46.193Z,1539014386.193 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T15:59:46.193Z,1539014386.193 [NAL9602] No Fault, FailCount= 1 2018-10-08T16:00:15.395Z,1539014415.395 [NAL9602](INFO): Powering up NAL9602 2018-10-08T16:00:21.844Z,1539014421.844 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:00:21.844Z,1539014421.844 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-10-08T16:00:21.844Z,1539014421.844 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T16:00:21.846Z,1539014421.846 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:00:21.846Z,1539014421.846 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-10-08T16:00:21.846Z,1539014421.846 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T16:00:21.868Z,1539014421.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T16:00:21.868Z,1539014421.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T16:00:22.265Z,1539014422.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T16:00:22.265Z,1539014422.265 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-10-08T16:00:22.266Z,1539014422.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T16:00:22.266Z,1539014422.266 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-10-08T16:00:22.621Z,1539014422.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T16:00:22.622Z,1539014422.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:00:22.622Z,1539014422.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:00:22.623Z,1539014422.623 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T16:00:22.623Z,1539014422.623 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:00:22.623Z,1539014422.623 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:00:26.595Z,1539014426.595 [NAL9602](INFO): NAL9602 initialized 2018-10-08T16:03:22.756Z,1539014602.756 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:03:22.757Z,1539014602.757 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-10-08T16:03:22.757Z,1539014602.757 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T16:03:22.759Z,1539014602.759 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:03:22.759Z,1539014602.759 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-10-08T16:03:22.759Z,1539014602.759 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T16:03:22.784Z,1539014602.784 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T16:03:22.789Z,1539014602.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T16:03:23.206Z,1539014603.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T16:03:23.206Z,1539014603.206 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-10-08T16:03:23.207Z,1539014603.207 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T16:03:23.207Z,1539014603.207 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-10-08T16:03:23.560Z,1539014603.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T16:03:23.560Z,1539014603.560 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:03:23.561Z,1539014603.561 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:03:23.561Z,1539014603.561 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T16:03:23.562Z,1539014603.562 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:03:23.562Z,1539014603.562 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:03:45.187Z,1539014625.187 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T15:58:43.2Z 2018-10-08T16:03:45.188Z,1539014625.188 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T16:03:45.188Z,1539014625.188 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T16:03:50.181Z,1539014630.181 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0144.lzma 2018-10-08T16:03:50.956Z,1539014630.956 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0144.lzma.bak 2018-10-08T16:03:50.956Z,1539014630.956 [DataOverHttps](INFO): SBD MOMSN=8614030 2018-10-08T16:04:00.285Z,1539014640.285 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T074106/Express0145.lzma 2018-10-08T16:04:01.064Z,1539014641.064 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0145.lzma.bak 2018-10-08T16:04:01.064Z,1539014641.064 [DataOverHttps](INFO): SBD MOMSN=8614032 2018-10-08T16:04:02.175Z,1539014642.175 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T16:04:02.175Z,1539014642.175 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T16:04:02.175Z,1539014642.175 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T16:06:23.871Z,1539014783.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:06:23.871Z,1539014783.871 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-10-08T16:06:23.871Z,1539014783.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T16:06:23.873Z,1539014783.873 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:06:23.873Z,1539014783.873 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-10-08T16:06:23.873Z,1539014783.873 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T16:06:23.946Z,1539014783.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T16:06:23.946Z,1539014783.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T16:06:30.299Z,1539014790.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T16:06:30.299Z,1539014790.299 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-10-08T16:06:30.300Z,1539014790.300 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T16:06:30.300Z,1539014790.300 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-10-08T16:06:30.537Z,1539014790.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T16:06:30.538Z,1539014790.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:06:30.538Z,1539014790.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:06:30.539Z,1539014790.539 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T16:06:30.539Z,1539014790.539 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:06:30.540Z,1539014790.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:09:02.328Z,1539014942.328 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T16:09:02.328Z,1539014942.328 [Default:CheckIn:C.Wait] Stopped 2018-10-08T16:09:02.329Z,1539014942.329 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T16:09:02.329Z,1539014942.329 [Default:CheckIn:D] Running Loop=1 2018-10-08T16:09:02.702Z,1539014942.702 [Default:CheckIn:D] Stopped 2018-10-08T16:09:02.702Z,1539014942.702 [Default:CheckIn:E] Running Loop=1 2018-10-08T16:09:03.123Z,1539014943.123 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 507.923861 min 2018-10-08T16:09:03.123Z,1539014943.123 [Default:CheckIn:E] Stopped 2018-10-08T16:09:03.124Z,1539014943.124 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T16:09:03.124Z,1539014943.124 [Default:CheckIn] Stopped 2018-10-08T16:09:03.124Z,1539014943.124 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T16:09:03.124Z,1539014943.124 [Default:CheckIn](INFO): Running loop #50 2018-10-08T16:09:03.124Z,1539014943.124 [Default:CheckIn] Running Loop=50 2018-10-08T16:09:03.124Z,1539014943.124 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T16:09:03.124Z,1539014943.124 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T16:09:30.783Z,1539014970.783 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:09:30.783Z,1539014970.783 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-10-08T16:09:30.783Z,1539014970.783 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T16:09:30.785Z,1539014970.785 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:09:30.785Z,1539014970.785 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-10-08T16:09:30.786Z,1539014970.786 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T16:09:30.819Z,1539014970.819 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T16:09:30.819Z,1539014970.819 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T16:09:31.227Z,1539014971.227 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T16:09:31.227Z,1539014971.227 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-10-08T16:09:31.228Z,1539014971.228 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T16:09:31.228Z,1539014971.228 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-10-08T16:09:31.584Z,1539014971.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T16:09:31.585Z,1539014971.585 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:09:31.586Z,1539014971.586 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:09:31.586Z,1539014971.586 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T16:09:31.586Z,1539014971.586 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:09:31.587Z,1539014971.587 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:10:28.463Z,1539015028.463 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T16:10:28.463Z,1539015028.463 [NAL9602] Data Fault, FailCount= 2 2018-10-08T16:10:28.463Z,1539015028.463 [NAL9602](ERROR): Data Fault 2018-10-08T16:10:28.536Z,1539015028.536 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T16:10:28.855Z,1539015028.855 [NAL9602](INFO): Powering down 2018-10-08T16:10:29.759Z,1539015029.759 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T16:10:29.759Z,1539015029.759 [NAL9602] No Fault, FailCount= 2 2018-10-08T16:10:36.206Z,1539015036.206 [BPC1](ERROR): BPC1A failed to parse battery data due to unrecognized msg size. 2018-10-08T16:10:58.955Z,1539015058.955 [NAL9602](INFO): Powering up NAL9602 2018-10-08T16:11:09.919Z,1539015069.919 [NAL9602](INFO): NAL9602 initialized 2018-10-08T16:12:31.903Z,1539015151.903 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:12:31.903Z,1539015151.903 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-10-08T16:12:31.903Z,1539015151.903 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T16:12:31.905Z,1539015151.905 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:12:31.905Z,1539015151.905 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-10-08T16:12:31.905Z,1539015151.905 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T16:12:31.940Z,1539015151.940 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T16:12:31.940Z,1539015151.940 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T16:12:32.348Z,1539015152.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T16:12:32.348Z,1539015152.348 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-10-08T16:12:32.348Z,1539015152.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T16:12:32.348Z,1539015152.348 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-10-08T16:12:32.792Z,1539015152.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T16:12:32.793Z,1539015152.793 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:12:32.793Z,1539015152.793 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:12:32.794Z,1539015152.794 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T16:12:32.794Z,1539015152.794 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:12:32.794Z,1539015152.794 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:13:54.994Z,1539015234.994 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude 2018-10-08T16:13:54.995Z,1539015234.995 [RDI_Pathfinder](ERROR): Failed to parse: :BD, +0.00, +0 +0.00, 0.00,41048.79 2018-10-08T16:14:05.479Z,1539015245.479 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T16:09:03.1Z 2018-10-08T16:14:05.479Z,1539015245.479 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T16:14:05.479Z,1539015245.479 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T16:14:10.668Z,1539015250.668 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T074106/Courier0147.lzma 2018-10-08T16:14:11.452Z,1539015251.452 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0147.lzma.bak 2018-10-08T16:14:11.453Z,1539015251.453 [DataOverHttps](INFO): SBD MOMSN=8614038 2018-10-08T16:14:20.970Z,1539015260.970 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T074106/Express0148.lzma 2018-10-08T16:14:21.728Z,1539015261.728 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0148.lzma.bak 2018-10-08T16:14:21.737Z,1539015261.737 [DataOverHttps](INFO): SBD MOMSN=8614040 2018-10-08T16:14:22.803Z,1539015262.803 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T16:14:22.803Z,1539015262.803 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T16:14:22.803Z,1539015262.803 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T16:15:32.876Z,1539015332.876 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:15:32.876Z,1539015332.876 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-10-08T16:15:32.876Z,1539015332.876 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T16:15:32.878Z,1539015332.878 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:15:32.878Z,1539015332.878 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-10-08T16:15:32.878Z,1539015332.878 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T16:15:32.908Z,1539015332.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T16:15:32.908Z,1539015332.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T16:15:33.320Z,1539015333.320 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T16:15:33.320Z,1539015333.320 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-10-08T16:15:33.320Z,1539015333.320 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T16:15:33.321Z,1539015333.321 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-10-08T16:15:33.686Z,1539015333.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T16:15:33.687Z,1539015333.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:15:33.687Z,1539015333.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:15:33.687Z,1539015333.687 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T16:15:33.688Z,1539015333.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:15:33.688Z,1539015333.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:16:57.975Z,1539015417.975 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-10-08T16:17:32.925Z,1539015452.925 [CBIT](IMPORTANT): Beginning ground fault scan 2018-10-08T16:17:43.752Z,1539015463.752 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.127362 CHAN A1 (24V): 0.003508 CHAN A2 (12V): -0.007351 CHAN A3 (5V): -0.002087 CHAN B0 (3.3V): 0.000184 CHAN B1 (3.15aV): -0.000049 CHAN B2 (3.15bV): 0.000217 CHAN B3 (GND): 0.002354 OPEN: 0.004756 Full Scale Calc: 4.765 mA, -1.589 mA 2018-10-08T16:17:59.420Z,1539015479.420 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T16:18:33.958Z,1539015513.958 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:18:33.959Z,1539015513.959 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-10-08T16:18:33.959Z,1539015513.959 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T16:18:33.971Z,1539015513.971 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:18:33.971Z,1539015513.971 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-10-08T16:18:33.971Z,1539015513.971 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T16:18:34.012Z,1539015514.012 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T16:18:34.012Z,1539015514.012 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T16:18:34.373Z,1539015514.373 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T16:18:34.374Z,1539015514.374 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-10-08T16:18:34.374Z,1539015514.374 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T16:18:34.374Z,1539015514.374 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-10-08T16:18:34.721Z,1539015514.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T16:18:34.722Z,1539015514.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:18:34.722Z,1539015514.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:18:34.723Z,1539015514.723 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T16:18:34.723Z,1539015514.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:18:34.723Z,1539015514.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:19:23.306Z,1539015563.306 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T16:19:23.306Z,1539015563.306 [Default:CheckIn:C.Wait] Stopped 2018-10-08T16:19:23.306Z,1539015563.306 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T16:19:23.306Z,1539015563.306 [Default:CheckIn:D] Running Loop=1 2018-10-08T16:19:23.669Z,1539015563.669 [Default:CheckIn:D] Stopped 2018-10-08T16:19:23.670Z,1539015563.670 [Default:CheckIn:E] Running Loop=1 2018-10-08T16:19:24.081Z,1539015564.081 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 518.273340 min 2018-10-08T16:19:24.081Z,1539015564.081 [Default:CheckIn:E] Stopped 2018-10-08T16:19:24.081Z,1539015564.081 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T16:19:24.081Z,1539015564.081 [Default:CheckIn] Stopped 2018-10-08T16:19:24.081Z,1539015564.081 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T16:19:24.082Z,1539015564.082 [Default:CheckIn](INFO): Running loop #51 2018-10-08T16:19:24.082Z,1539015564.082 [Default:CheckIn] Running Loop=51 2018-10-08T16:19:24.082Z,1539015564.082 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T16:19:24.082Z,1539015564.082 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T16:21:11.083Z,1539015671.083 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-10-08T16:21:11.083Z,1539015671.083 [NAL9602] Data Fault, FailCount= 3 2018-10-08T16:21:11.083Z,1539015671.083 [NAL9602](ERROR): Data Fault 2018-10-08T16:21:11.197Z,1539015671.197 [CBIT](ERROR): Data Fault in component: NAL9602 2018-10-08T16:21:11.475Z,1539015671.475 [NAL9602](INFO): Powering down 2018-10-08T16:21:12.371Z,1539015672.371 [CBIT](INFO): Clearing failed state for component NAL9602 2018-10-08T16:21:12.371Z,1539015672.371 [NAL9602] No Fault, FailCount= 3 2018-10-08T16:21:35.096Z,1539015695.096 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:21:35.096Z,1539015695.096 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-10-08T16:21:35.096Z,1539015695.096 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T16:21:35.098Z,1539015695.098 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:21:35.099Z,1539015695.099 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-10-08T16:21:35.099Z,1539015695.099 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T16:21:35.116Z,1539015695.116 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T16:21:35.116Z,1539015695.116 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T16:21:35.512Z,1539015695.512 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T16:21:35.512Z,1539015695.512 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-10-08T16:21:35.512Z,1539015695.512 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T16:21:35.512Z,1539015695.512 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-10-08T16:21:35.869Z,1539015695.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T16:21:35.870Z,1539015695.870 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:21:35.870Z,1539015695.870 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:21:35.871Z,1539015695.871 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T16:21:35.871Z,1539015695.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:21:35.871Z,1539015695.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:21:41.843Z,1539015701.843 [NAL9602](INFO): Powering up NAL9602 2018-10-08T16:21:53.043Z,1539015713.043 [NAL9602](INFO): NAL9602 initialized 2018-10-08T16:23:52.258Z,1539015832.258 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T16:24:26.282Z,1539015866.282 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T16:19:24.1Z 2018-10-08T16:24:26.282Z,1539015866.282 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T16:24:26.282Z,1539015866.282 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-10-08T16:24:31.268Z,1539015871.268 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181008T074106/Courier0150.lzma 2018-10-08T16:24:32.040Z,1539015872.040 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Courier0150.lzma.bak 2018-10-08T16:24:32.040Z,1539015872.040 [DataOverHttps](INFO): SBD MOMSN=8614046 2018-10-08T16:24:36.421Z,1539015876.421 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:24:36.421Z,1539015876.421 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-10-08T16:24:36.421Z,1539015876.421 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T16:24:36.423Z,1539015876.423 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:24:36.423Z,1539015876.423 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-10-08T16:24:36.423Z,1539015876.423 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T16:24:36.436Z,1539015876.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T16:24:36.437Z,1539015876.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T16:24:36.603Z,1539015876.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T16:24:36.603Z,1539015876.603 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-10-08T16:24:36.603Z,1539015876.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T16:24:36.603Z,1539015876.603 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-10-08T16:24:36.896Z,1539015876.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T16:24:36.896Z,1539015876.896 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:24:36.897Z,1539015876.897 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:24:36.897Z,1539015876.897 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T16:24:36.898Z,1539015876.898 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:24:36.898Z,1539015876.898 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:24:41.369Z,1539015881.369 [DataOverHttps](INFO): Sending 327 bytes from file Logs/20181008T074106/Express0151.lzma 2018-10-08T16:24:42.132Z,1539015882.132 [DataOverHttps](INFO): Moved sent file to Logs/20181008T074106/Express0151.lzma.bak 2018-10-08T16:24:42.132Z,1539015882.132 [DataOverHttps](INFO): SBD MOMSN=8614048 2018-10-08T16:24:43.214Z,1539015883.214 [Default:CheckIn:Read_Iridium] Stopped 2018-10-08T16:24:43.214Z,1539015883.214 [Default:CheckIn:C.Wait] Running Loop=1 2018-10-08T16:24:43.214Z,1539015883.214 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-10-08T16:27:37.187Z,1539016057.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:27:37.187Z,1539016057.187 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-10-08T16:27:37.188Z,1539016057.188 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-10-08T16:27:37.202Z,1539016057.202 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-10-08T16:27:37.202Z,1539016057.202 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-10-08T16:27:37.202Z,1539016057.202 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-10-08T16:27:37.253Z,1539016057.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-10-08T16:27:37.254Z,1539016057.254 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-10-08T16:27:37.562Z,1539016057.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-10-08T16:27:37.562Z,1539016057.562 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-10-08T16:27:37.563Z,1539016057.563 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-10-08T16:27:37.563Z,1539016057.563 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-10-08T16:27:37.942Z,1539016057.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-10-08T16:27:37.942Z,1539016057.942 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:27:37.943Z,1539016057.943 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:27:37.943Z,1539016057.943 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-10-08T16:27:37.944Z,1539016057.944 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-10-08T16:27:37.944Z,1539016057.944 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-10-08T16:27:49.889Z,1539016069.889 [RDI_Pathfinder](ERROR): No DVL communication! Re-initializing 2018-10-08T16:27:49.890Z,1539016069.889 [RDI_Pathfinder] Communications Fault, FailCount= 1 2018-10-08T16:27:49.890Z,1539016069.890 [RDI_Pathfinder](ERROR): Communications Fault 2018-10-08T16:27:49.965Z,1539016069.965 [CBIT](ERROR): Communications Fault in component: RDI_Pathfinder 2018-10-08T16:27:50.145Z,1539016070.145 [RDI_Pathfinder](INFO): Powering down 2018-10-08T16:27:50.876Z,1539016070.876 [CBIT](INFO): Clearing failed state for component RDI_Pathfinder 2018-10-08T16:27:50.876Z,1539016070.876 [RDI_Pathfinder] No Fault, FailCount= 1 2018-10-08T16:28:04.455Z,1539016084.455 [RDI_Pathfinder](ERROR): Failed to parse:Pathfinder 2018-10-08T16:29:03.503Z,1539016143.503 [RDI_Pathfinder](ERROR): Failed to parse: :HM,G,D,0e8c,0ffe,*15.880,*-0.006,*0.000 2018-10-08T16:29:30.424Z,1539016170.424 [RDI_Pathfinder](ERROR): Failed to parse: :BI,-32768,-32768,-32768,-32768,V 2018-10-08T16:29:43.673Z,1539016183.673 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-10-08T16:29:43.674Z,1539016183.674 [Default:CheckIn:C.Wait] Stopped 2018-10-08T16:29:43.674Z,1539016183.674 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-10-08T16:29:43.674Z,1539016183.674 [Default:CheckIn:D] Running Loop=1 2018-10-08T16:29:44.041Z,1539016184.041 [Default:CheckIn:D] Stopped 2018-10-08T16:29:44.041Z,1539016184.041 [Default:CheckIn:E] Running Loop=1 2018-10-08T16:29:44.535Z,1539016184.535 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 528.612793 min 2018-10-08T16:29:44.535Z,1539016184.535 [Default:CheckIn:E] Stopped 2018-10-08T16:29:44.535Z,1539016184.535 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-10-08T16:29:44.535Z,1539016184.535 [Default:CheckIn] Stopped 2018-10-08T16:29:44.536Z,1539016184.536 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T16:29:44.536Z,1539016184.536 [Default:CheckIn](INFO): Running loop #52 2018-10-08T16:29:44.536Z,1539016184.536 [Default:CheckIn] Running Loop=52 2018-10-08T16:29:44.536Z,1539016184.536 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-10-08T16:29:44.536Z,1539016184.536 [Default:CheckIn:Read_GPS] Running Loop=1 2018-10-08T16:30:00.719Z,1539016200.719 [CommandLine](IMPORTANT): got command restart application 2018-10-08T16:30:01.732Z,1539016201.732 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread. 2018-10-08T16:30:01.733Z,1539016201.733 [CommandLine ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:01.741Z,1539016201.741 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup. Bye! 2018-10-08T16:30:01.741Z,1539016201.741 [CommandLine ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:01.742Z,1539016201.742 [CommandLine](INFO): Join timeout helper Thread ID is 7509 2018-10-08T16:30:01.753Z,1539016201.753 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler 2018-10-08T16:30:01.753Z,1539016201.753 [NavChartDb ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:01.754Z,1539016201.754 [NavChartDb](INFO): Join timeout helper Thread ID is 7510 2018-10-08T16:30:01.929Z,1539016201.929 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread. 2018-10-08T16:30:01.929Z,1539016201.929 [NavChartDb ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:01.945Z,1539016201.945 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler 2018-10-08T16:30:01.945Z,1539016201.945 [Radio_Surface ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:01.945Z,1539016201.945 [Radio_Surface](INFO): Join timeout helper Thread ID is 7511 2018-10-08T16:30:02.025Z,1539016202.025 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread. 2018-10-08T16:30:02.025Z,1539016202.025 [Radio_Surface ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:02.037Z,1539016202.037 [ComponentRegistry](INFO): Shutting down WetLabsSeaOWL_UV_A ThreadHandler 2018-10-08T16:30:02.037Z,1539016202.037 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:02.037Z,1539016202.037 [WetLabsSeaOWL_UV_A](INFO): Join timeout helper Thread ID is 7512 2018-10-08T16:30:02.137Z,1539016202.137 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Uninitializing protected caller thread. 2018-10-08T16:30:02.137Z,1539016202.137 [WetLabsSeaOWL_UV_A](INFO): Powering down 2018-10-08T16:30:02.138Z,1539016202.138 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:02.157Z,1539016202.157 [ComponentRegistry](INFO): Shutting down CTD_NeilBrown ThreadHandler 2018-10-08T16:30:02.157Z,1539016202.157 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:02.157Z,1539016202.157 [CTD_NeilBrown](INFO): Join timeout helper Thread ID is 7513 2018-10-08T16:30:02.537Z,1539016202.537 [CTD_NeilBrown ThreadHandler](INFO): Uninitializing protected caller thread. 2018-10-08T16:30:02.537Z,1539016202.537 [CTD_NeilBrown](INFO): Powering down 2018-10-08T16:30:02.538Z,1539016202.538 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:02.542Z,1539016202.542 [ComponentRegistry](INFO): Shutting down logger ThreadHandler 2018-10-08T16:30:02.542Z,1539016202.542 [logger ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:02.543Z,1539016202.543 [logger](INFO): Join timeout helper Thread ID is 7514 2018-10-08T16:30:02.569Z,1539016202.569 [logger ThreadHandler](INFO): Uninitializing protected caller thread. 2018-10-08T16:30:02.569Z,1539016202.569 [logger ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:02.571Z,1539016202.571 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler 2018-10-08T16:30:02.571Z,1539016202.571 [CommandLine ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:02.571Z,1539016202.571 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler 2018-10-08T16:30:02.571Z,1539016202.571 [controlThread ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:02.571Z,1539016202.571 [controlThread](INFO): Join timeout helper Thread ID is 7515 2018-10-08T16:30:04.490Z,1539016204.490 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread. 2018-10-08T16:30:04.490Z,1539016204.490 [controlThread](DEBUG): Uninitializing ControlThread 2018-10-08T16:30:04.491Z,1539016204.491 [Aanderaa_O2](INFO): Powering down 2018-10-08T16:30:04.492Z,1539016204.492 [AHRS_M2](INFO): Powering down 2018-10-08T16:30:04.564Z,1539016204.564 [NAL9602](INFO): Powering down 2018-10-08T16:30:04.637Z,1539016204.637 [RDI_Pathfinder](INFO): Powering down 2018-10-08T16:30:04.638Z,1539016204.638 [RDI_PathfinderUp](INFO): Powering down 2018-10-08T16:30:04.640Z,1539016204.640 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator. 2018-10-08T16:30:04.640Z,1539016204.640 [ElevatorOffsetCalculator](DEBUG): Uninitializing ElevatorOffsetCalculator. 2018-10-08T16:30:04.641Z,1539016204.641 [NavChart](DEBUG): Uninitialize NavChart Navigation. 2018-10-08T16:30:04.642Z,1539016204.642 [MissionManager](INFO): Uninitializing Mission Default 2018-10-08T16:30:04.642Z,1539016204.642 [Default] Stopped 2018-10-08T16:30:04.642Z,1539016204.642 [Default](DEBUG): Aggregate::uninitialize Default 2018-10-08T16:30:04.642Z,1539016204.642 [Default:B.GoToSurface] Stopped 2018-10-08T16:30:04.642Z,1539016204.642 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent. 2018-10-08T16:30:04.642Z,1539016204.642 [Default:CheckIn] Stopped 2018-10-08T16:30:04.642Z,1539016204.642 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-10-08T16:30:04.643Z,1539016204.643 [Default:CheckIn:Read_GPS] Stopped 2018-10-08T16:30:04.646Z,1539016204.646 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent. 2018-10-08T16:30:04.647Z,1539016204.647 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent. 2018-10-08T16:30:04.647Z,1539016204.647 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent. 2018-10-08T16:30:04.647Z,1539016204.647 [LoopControl](DEBUG): Uninitialize LoopControlComponent. 2018-10-08T16:30:04.648Z,1539016204.648 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo. 2018-10-08T16:30:04.648Z,1539016204.648 [BuoyancyServo](INFO): Powering down 2018-10-08T16:30:04.661Z,1539016204.661 [ElevatorServo](DEBUG): Uninitialize Elevator Servo. 2018-10-08T16:30:04.661Z,1539016204.661 [ElevatorServo](INFO): Powering down 2018-10-08T16:30:04.662Z,1539016204.662 [MassServo](DEBUG): Uninitialize Mass Servo. 2018-10-08T16:30:04.662Z,1539016204.662 [MassServo](INFO): Powering down 2018-10-08T16:30:04.663Z,1539016204.663 [RudderServo](DEBUG): Uninitialize Rudder Servo. 2018-10-08T16:30:04.663Z,1539016204.663 [RudderServo](INFO): Powering down 2018-10-08T16:30:04.664Z,1539016204.664 [ThrusterServo](DEBUG): Uninitialize Thruster Servo. 2018-10-08T16:30:04.664Z,1539016204.664 [ThrusterServo](INFO): Powering down 2018-10-08T16:30:04.666Z,1539016204.666 [SBIT](DEBUG): Uninitialize SBIT Component. 2018-10-08T16:30:04.666Z,1539016204.666 [IBIT](DEBUG): Uninitialize IBIT Component. 2018-10-08T16:30:04.666Z,1539016204.666 [CBIT](DEBUG): Uninitialize CBIT Component. 2018-10-08T16:30:04.667Z,1539016204.667 [controlThread ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:04.737Z,1539016204.737 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:04.741Z,1539016204.741 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:04.803Z,1539016204.803 [Radio_Surface ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:04.852Z,1539016204.852 [NavChartDb ThreadHandler](INFO): Thread cancelled. 2018-10-08T16:30:04.911Z,1539016204.911 [logger ThreadHandler](INFO): Thread cancelled.