2018-10-04T04:13:05.248Z,1538626385.248 [Supervisor](DEBUG): Initializing supervisor.
2018-10-04T04:13:05.251Z,1538626385.251 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2018-10-04T04:13:05.251Z,1538626385.251 [SyncHandler](INFO): Protected caller Thread ID is 800
2018-10-04T04:13:05.252Z,1538626385.252 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2018-10-04T04:13:05.252Z,1538626385.252 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2018-10-04T04:13:05.253Z,1538626385.253 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 801
2018-10-04T04:13:05.255Z,1538626385.255 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2018-10-04T04:13:05.267Z,1538626385.267 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2018-10-04T04:13:05.268Z,1538626385.268 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2018-10-04T04:13:05.268Z,1538626385.268 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 802
2018-10-04T04:13:05.269Z,1538626385.269 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2018-10-04T04:13:05.270Z,1538626385.270 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2018-10-04T04:13:05.270Z,1538626385.270 [logger ThreadHandler](INFO): Protected caller Thread ID is 803
2018-10-04T04:13:05.272Z,1538626385.272 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2018-10-04T04:13:05.273Z,1538626385.273 [Supervisor](INFO): Looking for Config files in directory: Config/
2018-10-04T04:13:05.276Z,1538626385.276 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2018-10-04T04:13:05.464Z,1538626385.464 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2018-10-04T04:13:05.465Z,1538626385.465 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2018-10-04T04:13:05.609Z,1538626385.609 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2018-10-04T04:13:05.610Z,1538626385.610 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2018-10-04T04:13:05.956Z,1538626385.956 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2018-10-04T04:13:05.959Z,1538626385.959 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2018-10-04T04:13:06.098Z,1538626386.098 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2018-10-04T04:13:06.100Z,1538626386.100 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2018-10-04T04:13:06.181Z,1538626386.181 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2018-10-04T04:13:06.383Z,1538626386.383 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2018-10-04T04:13:06.386Z,1538626386.386 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2018-10-04T04:13:06.485Z,1538626386.485 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2018-10-04T04:13:06.487Z,1538626386.487 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2018-10-04T04:13:06.832Z,1538626386.832 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2018-10-04T04:13:06.832Z,1538626386.832 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2018-10-04T04:13:07.290Z,1538626387.290 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2018-10-04T04:13:07.291Z,1538626387.291 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2018-10-04T04:13:07.605Z,1538626387.605 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2018-10-04T04:13:07.606Z,1538626387.606 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2018-10-04T04:13:08.109Z,1538626388.109 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2018-10-04T04:13:08.110Z,1538626388.110 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2018-10-04T04:13:08.318Z,1538626388.318 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2018-10-04T04:13:08.320Z,1538626388.320 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2018-10-04T04:13:08.419Z,1538626388.419 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2018-10-04T04:13:08.420Z,1538626388.420 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2018-10-04T04:13:08.917Z,1538626388.917 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2018-10-04T04:13:08.918Z,1538626388.918 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2018-10-04T04:13:10.718Z,1538626390.718 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2018-10-04T04:13:10.720Z,1538626390.720 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-whoidhs/
2018-10-04T04:13:10.725Z,1538626390.725 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Battery.cfg
2018-10-04T04:13:10.955Z,1538626390.955 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2018-10-04T04:13:10.955Z,1538626390.955 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/BIT.cfg
2018-10-04T04:13:11.055Z,1538626391.055 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Navigation.cfg
2018-10-04T04:13:11.150Z,1538626391.150 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Control.cfg
2018-10-04T04:13:11.253Z,1538626391.253 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Simulator.cfg
2018-10-04T04:13:11.340Z,1538626391.340 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Science.cfg
2018-10-04T04:13:11.475Z,1538626391.475 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Sensor.cfg
2018-10-04T04:13:11.643Z,1538626391.643 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/Servo.cfg
2018-10-04T04:13:11.755Z,1538626391.755 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/logger.cfg
2018-10-04T04:13:11.855Z,1538626391.855 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/secure.cfg
2018-10-04T04:13:11.939Z,1538626391.939 [Supervisor](INFO): Opening Config file at: Config/lrauv-whoidhs/vehicle.cfg
2018-10-04T04:13:12.134Z,1538626392.134 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2018-10-04T04:13:12.139Z,1538626392.139 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2018-10-04T04:13:12.293Z,1538626392.293 [SBIT](DEBUG): Construct Startup Built In Test.
2018-10-04T04:13:12.323Z,1538626392.323 [SBIT] Loaded
2018-10-04T04:13:12.323Z,1538626392.323 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2018-10-04T04:13:12.324Z,1538626392.324 [IBIT](DEBUG): Construct Initiated Built In Test.
2018-10-04T04:13:12.351Z,1538626392.351 [IBIT] Loaded
2018-10-04T04:13:12.352Z,1538626392.352 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2018-10-04T04:13:12.355Z,1538626392.355 [CBIT](DEBUG): Construct Continuous Built In Test.
2018-10-04T04:13:12.510Z,1538626392.510 [CBIT] Loaded
2018-10-04T04:13:12.511Z,1538626392.511 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2018-10-04T04:13:12.511Z,1538626392.511 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2018-10-04T04:13:12.512Z,1538626392.512 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2018-10-04T04:13:12.600Z,1538626392.600 [VerticalControl](DEBUG): Construct VerticalControl.
2018-10-04T04:13:12.700Z,1538626392.700 [VerticalControl] Loaded
2018-10-04T04:13:12.700Z,1538626392.700 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2018-10-04T04:13:12.701Z,1538626392.701 [HorizontalControl](DEBUG): Construct HorizontalControl.
2018-10-04T04:13:12.762Z,1538626392.762 [HorizontalControl] Loaded
2018-10-04T04:13:12.762Z,1538626392.762 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2018-10-04T04:13:12.763Z,1538626392.763 [SpeedControl](DEBUG): Construct SpeedControl.
2018-10-04T04:13:12.768Z,1538626392.768 [SpeedControl] Loaded
2018-10-04T04:13:12.769Z,1538626392.769 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2018-10-04T04:13:12.769Z,1538626392.769 [LoopControl](DEBUG): Construct LoopControl.
2018-10-04T04:13:12.770Z,1538626392.770 [LoopControl] Loaded
2018-10-04T04:13:12.770Z,1538626392.770 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2018-10-04T04:13:12.771Z,1538626392.771 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2018-10-04T04:13:12.771Z,1538626392.771 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2018-10-04T04:13:12.827Z,1538626392.827 [DepthRateCalculator] Loaded
2018-10-04T04:13:12.827Z,1538626392.827 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2018-10-04T04:13:12.833Z,1538626392.833 [PitchRateCalculator] Loaded
2018-10-04T04:13:12.833Z,1538626392.833 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2018-10-04T04:13:12.849Z,1538626392.849 [SpeedCalculator] Loaded
2018-10-04T04:13:12.849Z,1538626392.849 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2018-10-04T04:13:12.870Z,1538626392.870 [TempGradientCalculator] Loaded
2018-10-04T04:13:12.871Z,1538626392.871 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2018-10-04T04:13:12.876Z,1538626392.876 [YawRateCalculator] Loaded
2018-10-04T04:13:12.876Z,1538626392.876 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2018-10-04T04:13:12.905Z,1538626392.905 [ElevatorOffsetCalculator] Loaded
2018-10-04T04:13:12.905Z,1538626392.905 [ComponentRegistry](DEBUG): SyncComponent "ElevatorOffsetCalculator" handled in the control thread.
2018-10-04T04:13:12.906Z,1538626392.906 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2018-10-04T04:13:12.908Z,1538626392.908 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2018-10-04T04:13:13.012Z,1538626393.012 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2018-10-04T04:13:13.013Z,1538626393.013 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2018-10-04T04:13:13.296Z,1538626393.296 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2018-10-04T04:13:13.297Z,1538626393.297 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2018-10-04T04:13:13.410Z,1538626393.410 [DeadReckonUsingMultipleVelocitySources] Loaded
2018-10-04T04:13:13.410Z,1538626393.410 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2018-10-04T04:13:13.464Z,1538626393.464 [DeadReckonUsingSpeedCalculator] Loaded
2018-10-04T04:13:13.465Z,1538626393.465 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2018-10-04T04:13:13.481Z,1538626393.481 [NavChart] Loaded
2018-10-04T04:13:13.481Z,1538626393.481 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2018-10-04T04:13:13.485Z,1538626393.485 [UniversalFixResidualReporter] Loaded
2018-10-04T04:13:13.486Z,1538626393.486 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2018-10-04T04:13:13.486Z,1538626393.486 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2018-10-04T04:13:13.487Z,1538626393.487 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2018-10-04T04:13:13.511Z,1538626393.511 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2018-10-04T04:13:13.512Z,1538626393.512 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2018-10-04T04:13:13.728Z,1538626393.728 [Aanderaa_O2] Loaded
2018-10-04T04:13:13.728Z,1538626393.728 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2018-10-04T04:13:13.806Z,1538626393.806 [CTD_NeilBrown] Loaded
2018-10-04T04:13:13.807Z,1538626393.807 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2018-10-04T04:13:13.808Z,1538626393.808 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 406DB4E0
2018-10-04T04:13:13.808Z,1538626393.808 [CTD_NeilBrown ThreadHandler](INFO): Protected caller Thread ID is 882
2018-10-04T04:13:13.853Z,1538626393.853 [WetLabsSeaOWL_UV_A] Loaded
2018-10-04T04:13:13.853Z,1538626393.853 [ComponentRegistry](DEBUG): Component "WetLabsSeaOWL_UV_A" handled in its own thread.
2018-10-04T04:13:13.854Z,1538626393.854 [WetLabsSeaOWL_UV_A ThreadHandler](DEBUG): Created PCaller Thread at 4070B4E0
2018-10-04T04:13:13.855Z,1538626393.855 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Protected caller Thread ID is 883
2018-10-04T04:13:13.855Z,1538626393.855 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2018-10-04T04:13:13.856Z,1538626393.856 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2018-10-04T04:13:14.522Z,1538626394.522 [AHRS_M2] Loaded
2018-10-04T04:13:14.522Z,1538626394.522 [ComponentRegistry](DEBUG): SyncComponent "AHRS_M2" handled in the control thread.
2018-10-04T04:13:14.659Z,1538626394.659 [DataOverHttps] Loaded
2018-10-04T04:13:14.659Z,1538626394.659 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2018-10-04T04:13:14.673Z,1538626394.673 [Depth_Keller] Loaded
2018-10-04T04:13:14.673Z,1538626394.673 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2018-10-04T04:13:14.678Z,1538626394.678 [DropWeight] Loaded
2018-10-04T04:13:14.678Z,1538626394.678 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2018-10-04T04:13:14.769Z,1538626394.769 [NAL9602] Loaded
2018-10-04T04:13:14.770Z,1538626394.770 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2018-10-04T04:13:14.775Z,1538626394.775 [Onboard] Loaded
2018-10-04T04:13:14.775Z,1538626394.775 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2018-10-04T04:13:14.782Z,1538626394.782 [Radio_Surface] Loaded
2018-10-04T04:13:14.783Z,1538626394.783 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2018-10-04T04:13:14.784Z,1538626394.784 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 4096C4E0
2018-10-04T04:13:14.784Z,1538626394.784 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 884
2018-10-04T04:13:14.812Z,1538626394.812 [RDI_Pathfinder] Loaded
2018-10-04T04:13:14.812Z,1538626394.812 [ComponentRegistry](DEBUG): SyncComponent "RDI_Pathfinder" handled in the control thread.
2018-10-04T04:13:14.834Z,1538626394.834 [RDI_PathfinderUp] Loaded
2018-10-04T04:13:14.835Z,1538626394.835 [ComponentRegistry](DEBUG): SyncComponent "RDI_PathfinderUp" handled in the control thread.
2018-10-04T04:13:14.841Z,1538626394.841 [SCPI] Loaded
2018-10-04T04:13:14.841Z,1538626394.841 [ComponentRegistry](DEBUG): SyncComponent "SCPI" handled in the control thread.
2018-10-04T04:13:16.956Z,1538626396.956 [BPC1] Loaded
2018-10-04T04:13:16.956Z,1538626396.956 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2018-10-04T04:13:16.957Z,1538626396.957 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2018-10-04T04:13:16.957Z,1538626396.957 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2018-10-04T04:13:17.610Z,1538626397.610 [BuoyancyServo] Loaded
2018-10-04T04:13:17.610Z,1538626397.610 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2018-10-04T04:13:17.622Z,1538626397.622 [ElevatorServo] Loaded
2018-10-04T04:13:17.622Z,1538626397.622 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2018-10-04T04:13:17.633Z,1538626397.633 [MassServo] Loaded
2018-10-04T04:13:17.633Z,1538626397.633 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2018-10-04T04:13:17.645Z,1538626397.645 [RudderServo] Loaded
2018-10-04T04:13:17.645Z,1538626397.645 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2018-10-04T04:13:17.656Z,1538626397.656 [ThrusterServo] Loaded
2018-10-04T04:13:17.656Z,1538626397.656 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2018-10-04T04:13:17.657Z,1538626397.657 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2018-10-04T04:13:17.658Z,1538626397.658 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2018-10-04T04:13:17.785Z,1538626397.785 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2018-10-04T04:13:17.786Z,1538626397.786 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2018-10-04T04:13:17.823Z,1538626397.823 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2018-10-04T04:13:17.826Z,1538626397.826 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2018-10-04T04:13:17.827Z,1538626397.827 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2018-10-04T04:13:17.834Z,1538626397.834 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2018-10-04T04:13:17.835Z,1538626397.835 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A154E0
2018-10-04T04:13:17.835Z,1538626397.835 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 885
2018-10-04T04:13:17.840Z,1538626397.840 [Supervisor](INFO): Main Thread ID is 796
2018-10-04T04:13:17.840Z,1538626397.840 [Supervisor](DEBUG): Running supervisor.
2018-10-04T04:13:17.841Z,1538626397.841 [CommandLine ThreadHandler](INFO): Handler Thread ID is 886
2018-10-04T04:13:17.843Z,1538626397.843 [controlThread ThreadHandler](INFO): Handler Thread ID is 887
2018-10-04T04:13:17.843Z,1538626397.843 [controlThread](DEBUG): Initializing ControlThread
2018-10-04T04:13:17.844Z,1538626397.844 [SBIT](INFO): Initialize SBIT Component.
2018-10-04T04:13:17.845Z,1538626397.845 [SBIT](IMPORTANT): git: 2018-09-26
2018-10-04T04:13:17.845Z,1538626397.845 [SBIT](INFO): git hash: 31af399f83a51421f0a6b1f0220f032bde3a1f81
2018-10-04T04:13:17.845Z,1538626397.845 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-10-04T04:13:17.846Z,1538626397.846 [SBIT](IMPORTANT): Kernel Version:#2 PREEMPT Thu Jan 11 20:13:48 PST 2018
2018-10-04T04:13:17.847Z,1538626397.847 [SBIT](INFO): Beginning SBIT in 28.000000 seconds.
2018-10-04T04:13:17.847Z,1538626397.847 [IBIT](INFO): Initialize IBIT Component.
2018-10-04T04:13:17.848Z,1538626397.848 [CBIT](DEBUG): Initialize CBIT Component.
2018-10-04T04:13:17.848Z,1538626397.848 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2018-10-04T04:13:17.849Z,1538626397.849 [CBIT](CRITICAL): LAST REBOOT DUE TO WATCHDOG TIMER RESET.
2018-10-04T04:13:17.849Z,1538626397.849 [logger ThreadHandler](INFO): Handler Thread ID is 888
2018-10-04T04:13:17.877Z,1538626397.877 [CTD_NeilBrown ThreadHandler](INFO): Handler Thread ID is 889
2018-10-04T04:13:17.878Z,1538626397.878 [CTD_NeilBrown](INFO): Powering down
2018-10-04T04:13:17.913Z,1538626397.913 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Handler Thread ID is 890
2018-10-04T04:13:17.914Z,1538626397.914 [WetLabsSeaOWL_UV_A](INFO): Powering down
2018-10-04T04:13:17.953Z,1538626397.953 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 891
2018-10-04T04:13:17.957Z,1538626397.957 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2018-10-04T04:13:17.959Z,1538626397.959 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2018-10-04T04:13:17.960Z,1538626397.960 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2018-10-04T04:13:17.960Z,1538626397.960 [LoopControl](DEBUG): Initialize LoopControlComponent.
2018-10-04T04:13:17.961Z,1538626397.961 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-10-04T04:13:17.961Z,1538626397.961 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2018-10-04T04:13:17.961Z,1538626397.961 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2018-10-04T04:13:17.962Z,1538626397.962 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2018-10-04T04:13:17.962Z,1538626397.962 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2018-10-04T04:13:17.962Z,1538626397.962 [ElevatorOffsetCalculator](DEBUG): Initializing ElevatorOffsetCalculator.
2018-10-04T04:13:17.963Z,1538626397.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:13:17.964Z,1538626397.964 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:13:17.964Z,1538626397.964 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:13:17.965Z,1538626397.965 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:13:17.965Z,1538626397.965 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:13:17.965Z,1538626397.965 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:13:17.966Z,1538626397.966 [NavChart](DEBUG): Initialize NavChart Navigation.
2018-10-04T04:13:17.966Z,1538626397.966 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2018-10-04T04:13:17.976Z,1538626397.976 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2018-10-04T04:13:17.977Z,1538626397.977 [Radio_Surface](INFO): Powering up
2018-10-04T04:13:17.990Z,1538626397.990 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 892
2018-10-04T04:13:18.007Z,1538626398.007 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2018-10-04T04:13:18.007Z,1538626398.007 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2018-10-04T04:13:18.008Z,1538626398.008 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2018-10-04T04:13:18.008Z,1538626398.008 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2018-10-04T04:13:18.008Z,1538626398.008 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2018-10-04T04:13:18.008Z,1538626398.008 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2018-10-04T04:13:18.008Z,1538626398.008 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2018-10-04T04:13:18.008Z,1538626398.008 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2018-10-04T04:13:18.009Z,1538626398.009 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2018-10-04T04:13:18.009Z,1538626398.009 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2018-10-04T04:13:18.009Z,1538626398.009 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2018-10-04T04:13:18.009Z,1538626398.009 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2018-10-04T04:13:18.010Z,1538626398.010 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2018-10-04T04:13:18.010Z,1538626398.010 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2018-10-04T04:13:18.010Z,1538626398.010 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2018-10-04T04:13:18.010Z,1538626398.010 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2018-10-04T04:13:18.027Z,1538626398.027 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2018-10-04T04:13:18.071Z,1538626398.071 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2018-10-04T04:13:18.071Z,1538626398.071 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2018-10-04T04:13:18.128Z,1538626398.128 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2018-10-04T04:13:18.142Z,1538626398.142 [Default:A.Wait](DEBUG): Construct Wait.
2018-10-04T04:13:18.144Z,1538626398.144 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-10-04T04:13:18.171Z,1538626398.171 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2018-10-04T04:13:18.189Z,1538626398.189 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2018-10-04T04:13:18.195Z,1538626398.195 [Default:E.Execute](DEBUG): Construct Execute.
2018-10-04T04:13:18.215Z,1538626398.215 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xmlns="Tethys"
         xmlns:Units="Tethys/Units"
         xmlns:Guidance="Tethys/Guidance"
         xmlns:Universal="Tethys/Universal"
         xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                             Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                             Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                             Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
         Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Sequence/>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn on</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2018-10-04T04:13:18.220Z,1538626398.220 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,AHRS_M2,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,RDI_Pathfinder,RDI_PathfinderUp,SCPI,BPC1,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,YawRateCalculator,ElevatorOffsetCalculator,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-10-04T04:13:18.287Z,1538626398.287 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2018-10-04T04:13:18.418Z,1538626398.418 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2018-10-04T04:13:18.817Z,1538626398.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:18.839Z,1538626398.839 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:18.969Z,1538626398.969 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-10-04T04:13:18.977Z,1538626398.977 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-10-04T04:13:18.984Z,1538626398.984 [ElevatorServo](DEBUG): Initializing EZServoServo.
2018-10-04T04:13:18.989Z,1538626398.989 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2018-10-04T04:13:19.003Z,1538626399.003 [MassServo](DEBUG): Initializing EZServoServo.
2018-10-04T04:13:19.009Z,1538626399.009 [MassServo](DEBUG): Initializing MassServo.
2018-10-04T04:13:19.019Z,1538626399.019 [RudderServo](DEBUG): Initializing EZServoServo.
2018-10-04T04:13:19.025Z,1538626399.025 [RudderServo](DEBUG): Initializing RudderServo.
2018-10-04T04:13:19.031Z,1538626399.031 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-10-04T04:13:19.037Z,1538626399.037 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-10-04T04:13:19.074Z,1538626399.074 [CommandLine](FAULT): Scheduling is paused
2018-10-04T04:13:19.075Z,1538626399.075 [CBIT](INFO): Critical error at 20181004T041317
2018-10-04T04:13:19.075Z,1538626399.075 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2018-10-04T04:13:19.325Z,1538626399.325 [RDI_PathfinderUp](INFO): Powering down
2018-10-04T04:13:19.385Z,1538626399.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:19.393Z,1538626399.393 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:19.566Z,1538626399.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:19.568Z,1538626399.568 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:19.933Z,1538626399.933 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2018-10-04T04:13:19.933Z,1538626399.933 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2018-10-04T04:13:19.933Z,1538626399.933 [BuoyancyServo] Communications Fault, FailCount= 1
2018-10-04T04:13:19.933Z,1538626399.933 [BuoyancyServo](ERROR): Communications Fault
2018-10-04T04:13:20.141Z,1538626400.141 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2018-10-04T04:13:20.184Z,1538626400.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:20.201Z,1538626400.201 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:20.207Z,1538626400.207 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-10-04T04:13:20.208Z,1538626400.208 [BuoyancyServo](INFO): Powering down
2018-10-04T04:13:20.580Z,1538626400.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:20.581Z,1538626400.581 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:20.976Z,1538626400.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:20.977Z,1538626400.977 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:21.469Z,1538626401.469 [Aanderaa_O2](INFO): Powering down
2018-10-04T04:13:21.584Z,1538626401.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:21.585Z,1538626401.585 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:21.813Z,1538626401.813 [AHRS_M2](ERROR): Read RFS packet UART error: serial timeout
2018-10-04T04:13:21.856Z,1538626401.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:21.862Z,1538626401.862 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-04T04:13:22.234Z,1538626402.234 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2018-10-04T04:13:22.234Z,1538626402.234 [BuoyancyServo] No Fault, FailCount= 1
2018-10-04T04:13:22.619Z,1538626402.619 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-10-04T04:13:22.740Z,1538626402.740 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-10-04T04:13:32.186Z,1538626412.186 [RDI_Pathfinder](ERROR): Failed to parse:Pathfinder
2018-10-04T04:13:44.959Z,1538626424.959 [NAL9602](INFO): Powering up NAL9602
2018-10-04T04:13:46.255Z,1538626426.255 [SBIT](IMPORTANT): Beginning Startup BIT
2018-10-04T04:13:46.260Z,1538626426.260 [CBIT](IMPORTANT): Beginning ground fault scan
2018-10-04T04:13:55.911Z,1538626435.911 [NAL9602](INFO): NAL9602 initialized
2018-10-04T04:13:57.267Z,1538626437.267 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.009207
CHAN A1 (24V): 0.003420
CHAN A2 (12V): -0.007308
CHAN A3 (5V): -0.001895
CHAN B0 (3.3V): 0.000400
CHAN B1 (3.15aV): 0.000022
CHAN B2 (3.15bV): 0.000246
CHAN B3 (GND): 0.002289
OPEN: 0.005017
Full Scale Calc: 4.765 mA, -1.589 mA
2018-10-04T04:14:31.048Z,1538626471.048 [NAL9602](INFO): SBD MO Status=2, MOMSN=1987, MT Status=2, MTMSN=0
2018-10-04T04:14:31.049Z,1538626471.049 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-10-04T04:14:38.286Z,1538626478.286 [RDI_Pathfinder](ERROR): Failed to parse:
:8,-32768,-32768,-32768,V
2018-10-04T04:14:39.940Z,1538626479.940 [SBIT](IMPORTANT): SBIT PASSED
2018-10-04T04:14:39.990Z,1538626479.990 [CommandLine](IMPORTANT): got command configSet list
2018-10-04T04:14:39.990Z,1538626479.990 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2018-10-04T04:14:39.993Z,1538626479.993 [CommandLine](IMPORTANT): BPC1.batterySamplingInterval=1 hour;

2018-10-04T04:14:39.993Z,1538626479.993 [CommandLine](IMPORTANT): CTD_NeilBrown.minSalinityBound=-10 practical_salinity_unit;

2018-10-04T04:14:39.994Z,1538626479.994 [CommandLine](IMPORTANT): Express linearApproximation concentration_of_colored_dissolved_organic_matter_in_sea_water_expressed_as_equivalent_mass_fraction_of_quinine_sulfate_dihydrate 1.000000 part_per_billion;

2018-10-04T04:14:39.994Z,1538626479.994 [CommandLine](IMPORTANT): IBIT.batteryVoltageThreshold=13.7 volt;

2018-10-04T04:14:39.994Z,1538626479.994 [CommandLine](IMPORTANT): NAL9602.gpsFailTimeout=10 minute;

2018-10-04T04:14:39.994Z,1538626479.994 [CommandLine](IMPORTANT): RDI_PathfinderUp.loadAtStartup=0 bool;

2018-10-04T04:14:39.994Z,1538626479.994 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=200 cubic_centimeter;

2018-10-04T04:14:39.994Z,1538626479.994 [CommandLine](IMPORTANT): VerticalControl.massDefault=2 millimeter;

2018-10-04T04:14:40.348Z,1538626480.348 [MissionManager](IMPORTANT): Started mission Startup
2018-10-04T04:14:40.349Z,1538626480.349 [Startup] Running Loop=1
2018-10-04T04:14:40.349Z,1538626480.349 [Startup](DEBUG): Aggregate::initialize Startup
2018-10-04T04:14:40.349Z,1538626480.349 [Startup:A.GoToSurface] Running Loop=1
2018-10-04T04:14:40.349Z,1538626480.349 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-10-04T04:14:40.350Z,1538626480.350 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-10-04T04:14:40.350Z,1538626480.350 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-10-04T04:14:40.351Z,1538626480.351 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-10-04T04:14:40.351Z,1538626480.351 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-10-04T04:14:40.352Z,1538626480.352 [Startup:A.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-10-04T04:14:40.358Z,1538626480.358 [Startup:StartupSatComms] Running Loop=1
2018-10-04T04:14:40.358Z,1538626480.358 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2018-10-04T04:14:40.358Z,1538626480.358 [Startup:StartupSatComms:A] Running Loop=1
2018-10-04T04:14:40.711Z,1538626480.711 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2018-10-04T04:15:40.701Z,1538626540.701 [Startup:StartupSatComms:A](INFO): Timed out from 2018-10-04T04:14:40.4Z
2018-10-04T04:15:40.701Z,1538626540.701 [Startup:StartupSatComms:A] Stopped
2018-10-04T04:15:40.701Z,1538626540.701 [Startup:StartupSatComms:B] Running Loop=1
2018-10-04T04:15:41.095Z,1538626541.095 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-10-04T04:15:46.068Z,1538626546.068 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.004342
2018-10-04T04:15:50.661Z,1538626550.661 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20181003T231749/Courier0060.lzma
2018-10-04T04:15:51.448Z,1538626551.448 [DataOverHttps](INFO): Moved sent file to Logs/20181003T231749/Courier0060.lzma.bak
2018-10-04T04:15:51.448Z,1538626551.448 [DataOverHttps](INFO): SBD MOMSN=8610517
2018-10-04T04:16:00.481Z,1538626560.481 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20181004T041305/Courier0000.lzma
2018-10-04T04:16:01.251Z,1538626561.251 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0000.lzma.bak
2018-10-04T04:16:01.252Z,1538626561.252 [DataOverHttps](INFO): SBD MOMSN=8610519
2018-10-04T04:16:13.985Z,1538626573.985 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20181003T231749/Express0061.lzma
2018-10-04T04:16:14.521Z,1538626574.521 [DataOverHttps](INFO): Moved sent file to Logs/20181003T231749/Express0061.lzma.bak
2018-10-04T04:16:14.521Z,1538626574.521 [DataOverHttps](INFO): SBD MOMSN=8610523
2018-10-04T04:16:19.022Z,1538626579.022 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:16:19.022Z,1538626579.022 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-10-04T04:16:19.022Z,1538626579.022 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:16:19.024Z,1538626579.024 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:16:19.024Z,1538626579.024 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-04T04:16:19.024Z,1538626579.024 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:16:19.037Z,1538626579.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:16:19.038Z,1538626579.038 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:16:19.235Z,1538626579.235 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:16:19.236Z,1538626579.236 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-10-04T04:16:19.236Z,1538626579.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:16:19.236Z,1538626579.236 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-04T04:16:19.534Z,1538626579.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:16:19.535Z,1538626579.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:16:19.535Z,1538626579.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:16:19.535Z,1538626579.535 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:16:19.536Z,1538626579.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:16:19.536Z,1538626579.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:16:25.048Z,1538626585.048 [DataOverHttps](INFO): Sending 1036 bytes from file Logs/20181004T041305/Express0001.lzma
2018-10-04T04:16:25.827Z,1538626585.827 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0001.lzma.bak
2018-10-04T04:16:25.827Z,1538626585.827 [DataOverHttps](INFO): SBD MOMSN=8610525
2018-10-04T04:16:27.551Z,1538626587.551 [Startup:StartupSatComms:B] Stopped
2018-10-04T04:16:27.551Z,1538626587.551 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2018-10-04T04:16:27.551Z,1538626587.551 [Startup:StartupSatComms] Stopped
2018-10-04T04:16:27.552Z,1538626587.552 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2018-10-04T04:16:27.557Z,1538626587.557 [Startup](INFO): Completed Startup
2018-10-04T04:16:27.557Z,1538626587.557 [MissionManager](INFO): Startup is completed.
2018-10-04T04:16:27.558Z,1538626587.558 [MissionManager](INFO): Uninitializing Mission Startup
2018-10-04T04:16:27.558Z,1538626587.558 [Startup] Stopped
2018-10-04T04:16:27.558Z,1538626587.558 [Startup](DEBUG): Aggregate::uninitialize Startup
2018-10-04T04:16:27.558Z,1538626587.558 [Startup:A.GoToSurface] Stopped
2018-10-04T04:16:27.558Z,1538626587.558 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-10-04T04:16:27.768Z,1538626587.768 [MissionManager](IMPORTANT): Started mission Default
2018-10-04T04:16:27.768Z,1538626587.768 [Default] Running Loop=1
2018-10-04T04:16:27.768Z,1538626587.768 [Default](DEBUG): Aggregate::initialize Default
2018-10-04T04:16:27.768Z,1538626587.768 [Default:B.GoToSurface] Running Loop=1
2018-10-04T04:16:27.768Z,1538626587.768 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-10-04T04:16:27.768Z,1538626587.768 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-10-04T04:16:27.776Z,1538626587.776 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-10-04T04:16:27.779Z,1538626587.779 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-10-04T04:16:27.779Z,1538626587.779 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-10-04T04:16:27.780Z,1538626587.780 [Default:B.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-10-04T04:16:27.780Z,1538626587.780 [Default:A.Wait] Running Loop=1
2018-10-04T04:16:27.780Z,1538626587.780 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-10-04T04:16:41.090Z,1538626601.090 [Default:A.Wait](INFO): Done Waiting.
2018-10-04T04:16:41.090Z,1538626601.090 [Default:A.Wait] Stopped
2018-10-04T04:16:41.090Z,1538626601.090 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T04:16:41.498Z,1538626601.498 [Default:CheckIn] Running Loop=1
2018-10-04T04:16:41.498Z,1538626601.498 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T04:16:41.498Z,1538626601.498 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T04:16:41.913Z,1538626601.913 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-10-04T04:18:58.871Z,1538626738.871 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-10-04T04:19:19.710Z,1538626759.710 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:19:19.711Z,1538626759.711 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-10-04T04:19:19.711Z,1538626759.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:19:19.712Z,1538626759.712 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:19:19.725Z,1538626759.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-04T04:19:19.725Z,1538626759.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:19:19.750Z,1538626759.750 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:19:19.751Z,1538626759.751 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:19:20.148Z,1538626760.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:19:20.148Z,1538626760.148 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-10-04T04:19:20.150Z,1538626760.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:19:20.151Z,1538626760.151 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-04T04:19:20.544Z,1538626760.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:19:20.545Z,1538626760.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:19:20.545Z,1538626760.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:19:20.546Z,1538626760.546 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:19:20.546Z,1538626760.546 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:19:20.546Z,1538626760.546 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:19:34.299Z,1538626774.299 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T04:21:41.853Z,1538626901.853 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T04:16:41.5Z
2018-10-04T04:21:41.853Z,1538626901.853 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T04:21:41.853Z,1538626901.853 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T04:21:42.243Z,1538626902.243 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-10-04T04:21:46.292Z,1538626906.292 [DataOverHttps](INFO): Sending 190 bytes from file Logs/20181004T041305/Courier0004.lzma
2018-10-04T04:21:47.056Z,1538626907.056 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0004.lzma.bak
2018-10-04T04:21:47.056Z,1538626907.056 [DataOverHttps](INFO): SBD MOMSN=8610549
2018-10-04T04:21:56.424Z,1538626916.424 [DataOverHttps](INFO): Sending 176 bytes from file Logs/20181004T041305/Express0005.lzma
2018-10-04T04:21:57.180Z,1538626917.180 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0005.lzma.bak
2018-10-04T04:21:57.180Z,1538626917.180 [DataOverHttps](INFO): SBD MOMSN=8610551
2018-10-04T04:21:58.254Z,1538626918.254 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T04:21:58.254Z,1538626918.254 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T04:21:58.254Z,1538626918.254 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T04:22:20.795Z,1538626940.795 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:22:20.795Z,1538626940.795 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-10-04T04:22:20.795Z,1538626940.795 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:22:20.801Z,1538626940.801 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:22:20.801Z,1538626940.801 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-04T04:22:20.802Z,1538626940.802 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:22:20.831Z,1538626940.831 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:22:20.831Z,1538626940.831 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:22:21.236Z,1538626941.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:22:21.236Z,1538626941.236 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-10-04T04:22:21.238Z,1538626941.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:22:21.238Z,1538626941.238 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-04T04:22:21.606Z,1538626941.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:22:21.606Z,1538626941.606 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:22:21.607Z,1538626941.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:22:21.607Z,1538626941.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:22:21.607Z,1538626941.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:22:21.608Z,1538626941.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:23:57.883Z,1538627037.883 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T04:23:57.883Z,1538627037.883 [NAL9602] Data Fault, FailCount= 1
2018-10-04T04:23:57.883Z,1538627037.883 [NAL9602](ERROR): Data Fault
2018-10-04T04:23:57.966Z,1538627037.966 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T04:23:58.259Z,1538627038.259 [NAL9602](INFO): Powering down
2018-10-04T04:23:59.133Z,1538627039.133 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T04:23:59.137Z,1538627039.137 [NAL9602] No Fault, FailCount= 1
2018-10-04T04:24:28.363Z,1538627068.363 [NAL9602](INFO): Powering up NAL9602
2018-10-04T04:24:39.563Z,1538627079.563 [NAL9602](INFO): NAL9602 initialized
2018-10-04T04:25:21.683Z,1538627121.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:25:21.683Z,1538627121.683 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-10-04T04:25:21.683Z,1538627121.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:25:21.689Z,1538627121.689 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:25:21.689Z,1538627121.689 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-04T04:25:21.689Z,1538627121.689 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:25:21.715Z,1538627121.715 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:25:21.715Z,1538627121.715 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:25:22.107Z,1538627122.107 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:25:22.107Z,1538627122.107 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-10-04T04:25:22.108Z,1538627122.108 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:25:22.108Z,1538627122.108 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-04T04:25:22.469Z,1538627122.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:25:22.477Z,1538627122.477 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:25:22.478Z,1538627122.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:25:22.478Z,1538627122.478 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:25:22.478Z,1538627122.478 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:25:22.479Z,1538627122.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:26:58.754Z,1538627218.754 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T04:26:58.755Z,1538627218.755 [Default:CheckIn:C.Wait] Stopped
2018-10-04T04:26:58.755Z,1538627218.755 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T04:26:58.755Z,1538627218.755 [Default:CheckIn:D] Running Loop=1
2018-10-04T04:26:59.186Z,1538627219.186 [Default:CheckIn:D] Stopped
2018-10-04T04:26:59.186Z,1538627219.186 [Default:CheckIn:E] Running Loop=1
2018-10-04T04:26:59.583Z,1538627219.583 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.523264 min 
2018-10-04T04:26:59.585Z,1538627219.585 [Default:CheckIn:E] Stopped
2018-10-04T04:26:59.585Z,1538627219.585 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T04:26:59.586Z,1538627219.586 [Default:CheckIn] Stopped
2018-10-04T04:26:59.586Z,1538627219.586 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T04:26:59.586Z,1538627219.586 [Default:CheckIn](INFO): Running loop #2
2018-10-04T04:26:59.586Z,1538627219.586 [Default:CheckIn] Running Loop=2
2018-10-04T04:26:59.586Z,1538627219.586 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T04:26:59.586Z,1538627219.586 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T04:28:22.579Z,1538627302.579 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:28:22.579Z,1538627302.579 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-10-04T04:28:22.579Z,1538627302.579 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:28:22.586Z,1538627302.586 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:28:22.586Z,1538627302.586 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-04T04:28:22.586Z,1538627302.586 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:28:22.608Z,1538627302.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:28:22.608Z,1538627302.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:28:23.022Z,1538627303.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:28:23.022Z,1538627303.022 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-10-04T04:28:23.023Z,1538627303.023 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:28:23.023Z,1538627303.023 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-04T04:28:23.366Z,1538627303.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:28:23.367Z,1538627303.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:28:23.367Z,1538627303.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:28:23.368Z,1538627303.368 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:28:23.368Z,1538627303.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:28:23.368Z,1538627303.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:31:23.552Z,1538627483.552 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:31:23.552Z,1538627483.552 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-10-04T04:31:23.552Z,1538627483.552 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:31:23.554Z,1538627483.554 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:31:23.554Z,1538627483.554 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-04T04:31:23.555Z,1538627483.555 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:31:23.568Z,1538627483.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:31:23.568Z,1538627483.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:31:27.148Z,1538627487.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:31:27.149Z,1538627487.149 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-10-04T04:31:27.149Z,1538627487.149 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:31:27.149Z,1538627487.149 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-04T04:31:27.276Z,1538627487.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:31:27.277Z,1538627487.277 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:31:27.278Z,1538627487.278 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:31:27.278Z,1538627487.278 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:31:27.278Z,1538627487.278 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:31:27.279Z,1538627487.279 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:32:02.016Z,1538627522.016 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T04:26:59.6Z
2018-10-04T04:32:02.016Z,1538627522.016 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T04:32:02.016Z,1538627522.016 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T04:32:06.983Z,1538627526.983 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0007.lzma
2018-10-04T04:32:07.848Z,1538627527.848 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0007.lzma.bak
2018-10-04T04:32:07.848Z,1538627527.848 [DataOverHttps](INFO): SBD MOMSN=8610555
2018-10-04T04:32:16.925Z,1538627536.925 [DataOverHttps](INFO): Sending 171 bytes from file Logs/20181004T041305/Express0008.lzma
2018-10-04T04:32:17.680Z,1538627537.680 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0008.lzma.bak
2018-10-04T04:32:17.680Z,1538627537.680 [DataOverHttps](INFO): SBD MOMSN=8610557
2018-10-04T04:32:18.699Z,1538627538.699 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T04:32:18.699Z,1538627538.699 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T04:32:18.700Z,1538627538.700 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T04:34:27.675Z,1538627667.675 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:34:27.675Z,1538627667.675 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-10-04T04:34:27.675Z,1538627667.675 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:34:27.677Z,1538627667.677 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:34:27.678Z,1538627667.678 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-04T04:34:27.678Z,1538627667.678 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:34:27.691Z,1538627667.691 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:34:27.691Z,1538627667.691 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:34:28.103Z,1538627668.103 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:34:28.104Z,1538627668.104 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-10-04T04:34:28.104Z,1538627668.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:34:28.104Z,1538627668.104 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-04T04:34:28.454Z,1538627668.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:34:28.454Z,1538627668.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:34:28.455Z,1538627668.455 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:34:28.455Z,1538627668.455 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:34:28.455Z,1538627668.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:34:28.456Z,1538627668.456 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:34:43.722Z,1538627683.722 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T04:34:43.723Z,1538627683.723 [NAL9602] Data Fault, FailCount= 2
2018-10-04T04:34:43.723Z,1538627683.723 [NAL9602](ERROR): Data Fault
2018-10-04T04:34:43.805Z,1538627683.805 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T04:34:44.099Z,1538627684.099 [NAL9602](INFO): Powering down
2018-10-04T04:34:44.965Z,1538627684.965 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T04:34:44.965Z,1538627684.965 [NAL9602] No Fault, FailCount= 2
2018-10-04T04:35:14.495Z,1538627714.495 [NAL9602](INFO): Powering up NAL9602
2018-10-04T04:35:25.387Z,1538627725.387 [NAL9602](INFO): NAL9602 initialized
2018-10-04T04:37:19.140Z,1538627839.140 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T04:37:19.141Z,1538627839.141 [Default:CheckIn:C.Wait] Stopped
2018-10-04T04:37:19.149Z,1538627839.149 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T04:37:19.149Z,1538627839.149 [Default:CheckIn:D] Running Loop=1
2018-10-04T04:37:19.530Z,1538627839.530 [Default:CheckIn:D] Stopped
2018-10-04T04:37:19.530Z,1538627839.530 [Default:CheckIn:E] Running Loop=1
2018-10-04T04:37:19.925Z,1538627839.925 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.862612 min 
2018-10-04T04:37:19.925Z,1538627839.925 [Default:CheckIn:E] Stopped
2018-10-04T04:37:19.925Z,1538627839.925 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T04:37:19.925Z,1538627839.925 [Default:CheckIn] Stopped
2018-10-04T04:37:19.926Z,1538627839.926 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T04:37:19.926Z,1538627839.926 [Default:CheckIn](INFO): Running loop #3
2018-10-04T04:37:19.926Z,1538627839.926 [Default:CheckIn] Running Loop=3
2018-10-04T04:37:19.926Z,1538627839.926 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T04:37:19.926Z,1538627839.926 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T04:37:28.723Z,1538627848.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:37:28.723Z,1538627848.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-10-04T04:37:28.723Z,1538627848.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:37:28.725Z,1538627848.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:37:28.726Z,1538627848.726 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-04T04:37:28.726Z,1538627848.726 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:37:28.740Z,1538627848.740 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:37:28.740Z,1538627848.740 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:37:29.157Z,1538627849.157 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:37:29.157Z,1538627849.157 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-10-04T04:37:29.158Z,1538627849.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:37:29.158Z,1538627849.158 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-04T04:37:29.522Z,1538627849.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:37:29.522Z,1538627849.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:37:29.523Z,1538627849.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:37:29.523Z,1538627849.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:37:29.523Z,1538627849.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:37:29.524Z,1538627849.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:40:29.647Z,1538628029.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:40:29.647Z,1538628029.647 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-10-04T04:40:29.647Z,1538628029.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:40:29.653Z,1538628029.653 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:40:29.653Z,1538628029.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-04T04:40:29.654Z,1538628029.654 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:40:29.675Z,1538628029.675 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:40:29.675Z,1538628029.675 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:40:30.071Z,1538628030.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:40:30.071Z,1538628030.071 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-10-04T04:40:30.072Z,1538628030.072 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:40:30.072Z,1538628030.072 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-04T04:40:30.486Z,1538628030.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:40:30.487Z,1538628030.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:40:30.487Z,1538628030.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:40:30.487Z,1538628030.487 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:40:30.488Z,1538628030.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:40:30.488Z,1538628030.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:42:22.268Z,1538628142.268 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T04:37:19.9Z
2018-10-04T04:42:22.268Z,1538628142.268 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T04:42:22.268Z,1538628142.268 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T04:42:27.286Z,1538628147.286 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0010.lzma
2018-10-04T04:42:28.064Z,1538628148.064 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0010.lzma.bak
2018-10-04T04:42:28.064Z,1538628148.064 [DataOverHttps](INFO): SBD MOMSN=8610561
2018-10-04T04:42:37.349Z,1538628157.349 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0011.lzma
2018-10-04T04:42:38.108Z,1538628158.108 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0011.lzma.bak
2018-10-04T04:42:38.108Z,1538628158.108 [DataOverHttps](INFO): SBD MOMSN=8610563
2018-10-04T04:42:39.068Z,1538628159.068 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T04:42:39.068Z,1538628159.068 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T04:42:39.068Z,1538628159.068 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T04:43:30.547Z,1538628210.547 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:43:30.547Z,1538628210.547 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-10-04T04:43:30.548Z,1538628210.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:43:30.550Z,1538628210.550 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:43:30.550Z,1538628210.550 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-04T04:43:30.550Z,1538628210.550 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:43:30.563Z,1538628210.563 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:43:30.563Z,1538628210.563 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:43:30.954Z,1538628210.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:43:30.954Z,1538628210.954 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-10-04T04:43:30.954Z,1538628210.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:43:30.955Z,1538628210.955 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-04T04:43:31.323Z,1538628211.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:43:31.324Z,1538628211.324 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:43:31.324Z,1538628211.324 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:43:31.324Z,1538628211.324 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:43:31.333Z,1538628211.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:43:31.333Z,1538628211.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:45:26.379Z,1538628326.379 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T04:45:26.379Z,1538628326.379 [NAL9602] Data Fault, FailCount= 3
2018-10-04T04:45:26.379Z,1538628326.379 [NAL9602](ERROR): Data Fault
2018-10-04T04:45:26.467Z,1538628326.467 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T04:45:26.786Z,1538628326.786 [NAL9602](INFO): Powering down
2018-10-04T04:45:27.650Z,1538628327.650 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T04:45:27.650Z,1538628327.650 [NAL9602] No Fault, FailCount= 3
2018-10-04T04:45:56.931Z,1538628356.931 [NAL9602](INFO): Powering up NAL9602
2018-10-04T04:46:07.731Z,1538628367.731 [NAL9602](INFO): NAL9602 initialized
2018-10-04T04:46:31.571Z,1538628391.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:46:31.571Z,1538628391.571 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-10-04T04:46:31.571Z,1538628391.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:46:31.582Z,1538628391.582 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:46:31.582Z,1538628391.582 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-04T04:46:31.582Z,1538628391.582 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:46:31.656Z,1538628391.656 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:46:31.656Z,1538628391.656 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:46:31.946Z,1538628391.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:46:31.946Z,1538628391.946 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-10-04T04:46:31.947Z,1538628391.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:46:31.947Z,1538628391.947 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-04T04:46:32.302Z,1538628392.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:46:32.302Z,1538628392.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:46:32.303Z,1538628392.303 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:46:32.303Z,1538628392.303 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:46:32.304Z,1538628392.304 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:46:32.304Z,1538628392.304 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:47:39.377Z,1538628459.377 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T04:47:39.378Z,1538628459.378 [Default:CheckIn:C.Wait] Stopped
2018-10-04T04:47:39.378Z,1538628459.378 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T04:47:39.378Z,1538628459.378 [Default:CheckIn:D] Running Loop=1
2018-10-04T04:47:39.753Z,1538628459.753 [Default:CheckIn:D] Stopped
2018-10-04T04:47:39.753Z,1538628459.753 [Default:CheckIn:E] Running Loop=1
2018-10-04T04:47:40.187Z,1538628460.187 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.199683 min 
2018-10-04T04:47:40.187Z,1538628460.187 [Default:CheckIn:E] Stopped
2018-10-04T04:47:40.187Z,1538628460.187 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T04:47:40.187Z,1538628460.187 [Default:CheckIn] Stopped
2018-10-04T04:47:40.187Z,1538628460.187 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T04:47:40.188Z,1538628460.188 [Default:CheckIn](INFO): Running loop #4
2018-10-04T04:47:40.188Z,1538628460.188 [Default:CheckIn] Running Loop=4
2018-10-04T04:47:40.188Z,1538628460.188 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T04:47:40.188Z,1538628460.188 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T04:49:32.419Z,1538628572.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:49:32.419Z,1538628572.419 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-10-04T04:49:32.419Z,1538628572.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:49:32.421Z,1538628572.421 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:49:32.421Z,1538628572.421 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-04T04:49:32.421Z,1538628572.421 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:49:32.439Z,1538628572.439 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:49:32.440Z,1538628572.440 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:49:32.869Z,1538628572.869 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:49:32.872Z,1538628572.872 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-10-04T04:49:32.872Z,1538628572.872 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:49:32.873Z,1538628572.873 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-04T04:49:33.218Z,1538628573.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:49:33.218Z,1538628573.218 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:49:33.219Z,1538628573.219 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:49:33.219Z,1538628573.219 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:49:33.219Z,1538628573.219 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:49:33.220Z,1538628573.220 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:52:33.539Z,1538628753.539 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:52:33.540Z,1538628753.540 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-10-04T04:52:33.540Z,1538628753.540 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:52:33.542Z,1538628753.542 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:52:33.542Z,1538628753.542 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-04T04:52:33.542Z,1538628753.542 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:52:33.568Z,1538628753.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:52:33.568Z,1538628753.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:52:33.987Z,1538628753.987 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:52:33.987Z,1538628753.987 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-10-04T04:52:33.988Z,1538628753.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:52:33.988Z,1538628753.988 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-04T04:52:34.343Z,1538628754.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:52:34.343Z,1538628754.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:52:34.343Z,1538628754.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:52:34.344Z,1538628754.344 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:52:34.344Z,1538628754.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:52:34.345Z,1538628754.345 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:52:42.772Z,1538628762.772 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T04:47:40.2Z
2018-10-04T04:52:42.772Z,1538628762.772 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T04:52:42.772Z,1538628762.772 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T04:52:44.073Z,1538628764.073 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T04:52:47.854Z,1538628767.854 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0013.lzma
2018-10-04T04:52:48.615Z,1538628768.615 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0013.lzma.bak
2018-10-04T04:52:48.616Z,1538628768.616 [DataOverHttps](INFO): SBD MOMSN=8610567
2018-10-04T04:52:57.785Z,1538628777.785 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0014.lzma
2018-10-04T04:52:58.568Z,1538628778.568 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0014.lzma.bak
2018-10-04T04:52:58.568Z,1538628778.568 [DataOverHttps](INFO): SBD MOMSN=8610569
2018-10-04T04:52:59.531Z,1538628779.531 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T04:52:59.531Z,1538628779.531 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T04:52:59.531Z,1538628779.531 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T04:55:34.499Z,1538628934.499 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:55:34.499Z,1538628934.499 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-10-04T04:55:34.499Z,1538628934.499 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:55:34.521Z,1538628934.521 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:55:34.521Z,1538628934.521 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-04T04:55:34.521Z,1538628934.521 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:55:34.542Z,1538628934.542 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:55:34.543Z,1538628934.543 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:55:34.932Z,1538628934.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:55:34.932Z,1538628934.932 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-10-04T04:55:34.933Z,1538628934.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:55:34.933Z,1538628934.933 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-04T04:55:35.310Z,1538628935.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:55:35.310Z,1538628935.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:55:35.311Z,1538628935.311 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:55:35.311Z,1538628935.311 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:55:35.311Z,1538628935.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:55:35.312Z,1538628935.312 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:56:10.143Z,1538628970.143 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T04:56:10.143Z,1538628970.143 [NAL9602] Data Fault, FailCount= 4
2018-10-04T04:56:10.143Z,1538628970.143 [NAL9602](ERROR): Data Fault
2018-10-04T04:56:10.243Z,1538628970.243 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T04:56:10.545Z,1538628970.545 [NAL9602](INFO): Powering down
2018-10-04T04:56:11.409Z,1538628971.409 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T04:56:11.409Z,1538628971.409 [NAL9602] No Fault, FailCount= 4
2018-10-04T04:56:40.887Z,1538629000.887 [NAL9602](INFO): Powering up NAL9602
2018-10-04T04:56:51.695Z,1538629011.695 [NAL9602](INFO): NAL9602 initialized
2018-10-04T04:57:59.968Z,1538629079.968 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T04:57:59.968Z,1538629079.968 [Default:CheckIn:C.Wait] Stopped
2018-10-04T04:57:59.968Z,1538629079.968 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T04:57:59.969Z,1538629079.969 [Default:CheckIn:D] Running Loop=1
2018-10-04T04:58:00.372Z,1538629080.372 [Default:CheckIn:D] Stopped
2018-10-04T04:58:00.373Z,1538629080.373 [Default:CheckIn:E] Running Loop=1
2018-10-04T04:58:00.777Z,1538629080.777 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.543408 min 
2018-10-04T04:58:00.778Z,1538629080.778 [Default:CheckIn:E] Stopped
2018-10-04T04:58:00.778Z,1538629080.778 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T04:58:00.778Z,1538629080.778 [Default:CheckIn] Stopped
2018-10-04T04:58:00.778Z,1538629080.778 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T04:58:00.778Z,1538629080.778 [Default:CheckIn](INFO): Running loop #5
2018-10-04T04:58:00.778Z,1538629080.778 [Default:CheckIn] Running Loop=5
2018-10-04T04:58:00.778Z,1538629080.778 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T04:58:00.779Z,1538629080.779 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T04:58:35.667Z,1538629115.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:58:35.667Z,1538629115.667 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-10-04T04:58:35.667Z,1538629115.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T04:58:35.674Z,1538629115.674 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T04:58:35.674Z,1538629115.674 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-04T04:58:35.674Z,1538629115.674 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T04:58:35.721Z,1538629115.721 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T04:58:35.722Z,1538629115.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T04:58:36.092Z,1538629116.092 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T04:58:36.092Z,1538629116.092 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-10-04T04:58:36.093Z,1538629116.093 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T04:58:36.093Z,1538629116.093 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-04T04:58:36.478Z,1538629116.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T04:58:36.478Z,1538629116.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:58:36.479Z,1538629116.479 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:58:36.479Z,1538629116.479 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T04:58:36.479Z,1538629116.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T04:58:36.480Z,1538629116.480 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T04:59:02.165Z,1538629142.165 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T04:59:02.166Z,1538629142.166 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100322035729,35.0, -.0,1448.9,  0
2018-10-04T05:01:36.872Z,1538629296.872 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:01:36.872Z,1538629296.872 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-10-04T05:01:36.872Z,1538629296.872 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:01:36.874Z,1538629296.874 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:01:36.874Z,1538629296.874 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-04T05:01:36.874Z,1538629296.874 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:01:36.912Z,1538629296.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:01:36.912Z,1538629296.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:01:37.299Z,1538629297.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:01:37.299Z,1538629297.299 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-10-04T05:01:37.300Z,1538629297.300 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:01:37.300Z,1538629297.300 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-04T05:01:37.666Z,1538629297.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:01:37.666Z,1538629297.666 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:01:37.667Z,1538629297.667 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:01:37.667Z,1538629297.667 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:01:37.667Z,1538629297.667 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:01:37.668Z,1538629297.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:03:03.004Z,1538629383.004 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T04:58:00.8Z
2018-10-04T05:03:03.004Z,1538629383.004 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T05:03:03.004Z,1538629383.004 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T05:03:07.932Z,1538629387.932 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0016.lzma
2018-10-04T05:03:08.728Z,1538629388.728 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0016.lzma.bak
2018-10-04T05:03:08.728Z,1538629388.728 [DataOverHttps](INFO): SBD MOMSN=8610573
2018-10-04T05:03:17.905Z,1538629397.905 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0017.lzma
2018-10-04T05:03:18.687Z,1538629398.687 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0017.lzma.bak
2018-10-04T05:03:18.688Z,1538629398.688 [DataOverHttps](INFO): SBD MOMSN=8610575
2018-10-04T05:03:19.572Z,1538629399.572 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-04T05:03:19.604Z,1538629399.604 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T05:03:19.605Z,1538629399.605 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T05:03:19.605Z,1538629399.605 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T05:04:38.058Z,1538629478.058 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:04:38.058Z,1538629478.058 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-10-04T05:04:38.058Z,1538629478.058 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:04:38.060Z,1538629478.060 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:04:38.060Z,1538629478.060 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-04T05:04:38.060Z,1538629478.060 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:04:38.093Z,1538629478.093 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:04:38.093Z,1538629478.093 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:04:38.450Z,1538629478.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:04:38.450Z,1538629478.450 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-10-04T05:04:38.451Z,1538629478.451 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:04:38.451Z,1538629478.451 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-04T05:04:38.829Z,1538629478.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:04:38.830Z,1538629478.830 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:04:38.830Z,1538629478.830 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:04:38.830Z,1538629478.830 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:04:38.831Z,1538629478.831 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:04:38.831Z,1538629478.831 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:06:45.412Z,1538629605.412 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=60.411716
2018-10-04T05:06:53.028Z,1538629613.028 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T05:06:53.028Z,1538629613.028 [NAL9602] Data Fault, FailCount= 5
2018-10-04T05:06:53.028Z,1538629613.028 [NAL9602](ERROR): Data Fault
2018-10-04T05:06:53.100Z,1538629613.100 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T05:06:53.100Z,1538629613.100 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T05:06:53.403Z,1538629613.403 [NAL9602](INFO): Powering down
2018-10-04T05:06:53.466Z,1538629613.466 [CBIT](INFO): Critical error at 20181004T050653
2018-10-04T05:07:20.999Z,1538629640.999 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-10-04T05:07:39.036Z,1538629659.036 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:07:39.036Z,1538629659.036 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-10-04T05:07:39.036Z,1538629659.036 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:07:39.063Z,1538629659.063 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:07:39.063Z,1538629659.063 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-04T05:07:39.063Z,1538629659.063 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:07:39.088Z,1538629659.088 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:07:39.088Z,1538629659.088 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:07:39.466Z,1538629659.466 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:07:39.466Z,1538629659.466 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-10-04T05:07:39.467Z,1538629659.467 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:07:39.467Z,1538629659.467 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-04T05:07:39.838Z,1538629659.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:07:39.838Z,1538629659.838 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:07:39.839Z,1538629659.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:07:39.839Z,1538629659.839 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:07:39.839Z,1538629659.839 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:07:39.840Z,1538629659.840 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:07:56.199Z,1538629676.199 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-10-04T05:08:19.836Z,1538629699.836 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T05:08:19.836Z,1538629699.836 [Default:CheckIn:C.Wait] Stopped
2018-10-04T05:08:19.836Z,1538629699.836 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T05:08:19.837Z,1538629699.837 [Default:CheckIn:D] Running Loop=1
2018-10-04T05:08:20.256Z,1538629700.256 [Default:CheckIn:D] Stopped
2018-10-04T05:08:20.256Z,1538629700.256 [Default:CheckIn:E] Running Loop=1
2018-10-04T05:08:20.645Z,1538629700.645 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 51.874805 min 
2018-10-04T05:08:20.646Z,1538629700.646 [Default:CheckIn:E] Stopped
2018-10-04T05:08:20.646Z,1538629700.646 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T05:08:20.646Z,1538629700.646 [Default:CheckIn] Stopped
2018-10-04T05:08:20.646Z,1538629700.646 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T05:08:20.646Z,1538629700.646 [Default:CheckIn](INFO): Running loop #6
2018-10-04T05:08:20.646Z,1538629700.646 [Default:CheckIn] Running Loop=6
2018-10-04T05:08:20.646Z,1538629700.646 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T05:08:20.646Z,1538629700.646 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T05:08:31.399Z,1538629711.399 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-10-04T05:08:53.081Z,1538629733.081 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T05:08:53.081Z,1538629733.081 [NAL9602] No Fault, FailCount= 5
2018-10-04T05:08:53.407Z,1538629733.407 [NAL9602](INFO): Powering up NAL9602
2018-10-04T05:09:04.211Z,1538629744.211 [NAL9602](INFO): NAL9602 initialized
2018-10-04T05:09:06.602Z,1538629746.602 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-10-04T05:09:41.799Z,1538629781.799 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-10-04T05:10:16.999Z,1538629816.999 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-10-04T05:10:39.847Z,1538629839.847 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:10:39.847Z,1538629839.847 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-10-04T05:10:39.848Z,1538629839.848 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:10:39.854Z,1538629839.854 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:10:39.854Z,1538629839.854 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-04T05:10:39.854Z,1538629839.854 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:10:39.876Z,1538629839.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:10:39.876Z,1538629839.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:10:40.286Z,1538629840.286 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:10:40.286Z,1538629840.286 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-10-04T05:10:40.287Z,1538629840.287 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:10:40.287Z,1538629840.287 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-04T05:10:40.654Z,1538629840.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:10:40.655Z,1538629840.655 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:10:40.655Z,1538629840.655 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:10:40.655Z,1538629840.655 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:10:40.656Z,1538629840.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:10:40.656Z,1538629840.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:10:52.198Z,1538629852.198 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-10-04T05:11:27.399Z,1538629887.399 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-10-04T05:12:02.999Z,1538629922.999 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-10-04T05:12:21.114Z,1538629941.114 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.017207
2018-10-04T05:13:26.135Z,1538630006.135 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T05:08:20.6Z
2018-10-04T05:13:26.135Z,1538630006.135 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T05:13:26.135Z,1538630006.135 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T05:13:35.906Z,1538630015.906 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0019.lzma
2018-10-04T05:13:36.670Z,1538630016.670 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0019.lzma.bak
2018-10-04T05:13:36.670Z,1538630016.670 [DataOverHttps](INFO): SBD MOMSN=8610579
2018-10-04T05:13:45.611Z,1538630025.611 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:13:45.611Z,1538630025.611 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-10-04T05:13:45.611Z,1538630025.611 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:13:45.622Z,1538630025.622 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:13:45.622Z,1538630025.622 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-04T05:13:45.622Z,1538630025.622 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:13:45.669Z,1538630025.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:13:45.677Z,1538630025.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:13:45.891Z,1538630025.891 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:13:45.891Z,1538630025.891 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-10-04T05:13:45.892Z,1538630025.892 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:13:45.892Z,1538630025.892 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-04T05:13:46.170Z,1538630026.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:13:46.170Z,1538630026.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:13:46.171Z,1538630026.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:13:46.171Z,1538630026.171 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:13:46.172Z,1538630026.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:13:46.172Z,1538630026.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:13:53.386Z,1538630033.386 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0020.lzma
2018-10-04T05:13:54.556Z,1538630034.556 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0020.lzma.bak
2018-10-04T05:13:54.556Z,1538630034.556 [DataOverHttps](INFO): SBD MOMSN=8610582
2018-10-04T05:13:56.245Z,1538630036.245 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T05:13:56.245Z,1538630036.245 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T05:13:56.245Z,1538630036.245 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T05:16:46.311Z,1538630206.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:16:46.311Z,1538630206.311 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-10-04T05:16:46.311Z,1538630206.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:16:46.313Z,1538630206.313 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:16:46.314Z,1538630206.314 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-10-04T05:16:46.314Z,1538630206.314 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:16:46.327Z,1538630206.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:16:46.327Z,1538630206.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:16:46.698Z,1538630206.698 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:16:46.698Z,1538630206.698 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-10-04T05:16:46.699Z,1538630206.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:16:46.699Z,1538630206.699 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-10-04T05:16:47.098Z,1538630207.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:16:47.098Z,1538630207.098 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:16:47.099Z,1538630207.099 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:16:47.099Z,1538630207.099 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:16:47.099Z,1538630207.099 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:16:47.100Z,1538630207.100 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:18:36.958Z,1538630316.958 [RDI_Pathfinder](ERROR): Failed to parse:
:H8c,0ffd, 15.894, -0.002, 0.000
2018-10-04T05:18:43.033Z,1538630323.033 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T05:18:56.656Z,1538630336.656 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T05:18:56.657Z,1538630336.657 [Default:CheckIn:C.Wait] Stopped
2018-10-04T05:18:56.657Z,1538630336.657 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T05:18:56.657Z,1538630336.657 [Default:CheckIn:D] Running Loop=1
2018-10-04T05:18:57.067Z,1538630337.067 [Default:CheckIn:D] Stopped
2018-10-04T05:18:57.067Z,1538630337.067 [Default:CheckIn:E] Running Loop=1
2018-10-04T05:18:57.465Z,1538630337.465 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.488322 min 
2018-10-04T05:18:57.466Z,1538630337.466 [Default:CheckIn:E] Stopped
2018-10-04T05:18:57.466Z,1538630337.466 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T05:18:57.466Z,1538630337.466 [Default:CheckIn] Stopped
2018-10-04T05:18:57.466Z,1538630337.466 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T05:18:57.466Z,1538630337.466 [Default:CheckIn](INFO): Running loop #7
2018-10-04T05:18:57.466Z,1538630337.466 [Default:CheckIn] Running Loop=7
2018-10-04T05:18:57.466Z,1538630337.466 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T05:18:57.467Z,1538630337.467 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T05:19:06.605Z,1538630346.605 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T05:19:06.605Z,1538630346.605 [NAL9602] Data Fault, FailCount= 1
2018-10-04T05:19:06.605Z,1538630346.605 [NAL9602](ERROR): Data Fault
2018-10-04T05:19:06.682Z,1538630346.682 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T05:19:07.026Z,1538630347.026 [NAL9602](INFO): Powering down
2018-10-04T05:19:07.883Z,1538630347.883 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T05:19:07.883Z,1538630347.883 [NAL9602] No Fault, FailCount= 1
2018-10-04T05:19:37.108Z,1538630377.108 [NAL9602](INFO): Powering up NAL9602
2018-10-04T05:19:43.135Z,1538630383.135 [RDI_Pathfinder](ERROR): only read 2 of 5 data items
2018-10-04T05:19:43.135Z,1538630383.135 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-768,V
2018-10-04T05:19:47.144Z,1538630387.144 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:19:47.144Z,1538630387.144 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-10-04T05:19:47.144Z,1538630387.144 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:19:47.155Z,1538630387.155 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:19:47.155Z,1538630387.155 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-10-04T05:19:47.155Z,1538630387.155 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:19:47.177Z,1538630387.177 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:19:47.177Z,1538630387.177 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:19:47.559Z,1538630387.559 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:19:47.559Z,1538630387.559 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-10-04T05:19:47.559Z,1538630387.559 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:19:47.559Z,1538630387.559 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-10-04T05:19:47.966Z,1538630387.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:19:47.967Z,1538630387.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:19:47.967Z,1538630387.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:19:47.968Z,1538630387.968 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:19:47.968Z,1538630387.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:19:47.968Z,1538630387.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:19:48.291Z,1538630388.291 [NAL9602](INFO): NAL9602 initialized
2018-10-04T05:20:55.286Z,1538630455.286 [BPC1](ERROR): BPC1A: No match for stick with serial number:1717 in the onboard configuration file.
2018-10-04T05:22:48.852Z,1538630568.852 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:22:48.852Z,1538630568.852 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-10-04T05:22:48.853Z,1538630568.853 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:22:48.855Z,1538630568.855 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:22:48.855Z,1538630568.855 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-10-04T05:22:48.855Z,1538630568.855 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:22:48.871Z,1538630568.871 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:22:48.872Z,1538630568.872 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:22:49.039Z,1538630569.039 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:22:49.040Z,1538630569.040 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-10-04T05:22:49.040Z,1538630569.040 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:22:49.040Z,1538630569.040 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-10-04T05:22:49.366Z,1538630569.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:22:49.366Z,1538630569.366 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:22:49.366Z,1538630569.366 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:22:49.367Z,1538630569.367 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:22:49.367Z,1538630569.367 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:22:49.368Z,1538630569.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:23:59.180Z,1538630639.180 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T05:18:57.5Z
2018-10-04T05:23:59.180Z,1538630639.180 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T05:23:59.180Z,1538630639.180 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T05:24:04.210Z,1538630644.210 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0022.lzma
2018-10-04T05:24:04.976Z,1538630644.976 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0022.lzma.bak
2018-10-04T05:24:04.976Z,1538630644.976 [DataOverHttps](INFO): SBD MOMSN=8610586
2018-10-04T05:24:14.290Z,1538630654.290 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20181004T041305/Express0023.lzma
2018-10-04T05:24:15.044Z,1538630655.044 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0023.lzma.bak
2018-10-04T05:24:15.044Z,1538630655.044 [DataOverHttps](INFO): SBD MOMSN=8610588
2018-10-04T05:24:16.001Z,1538630656.001 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T05:24:16.001Z,1538630656.001 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T05:24:16.001Z,1538630656.001 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T05:25:49.686Z,1538630749.686 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:25:49.687Z,1538630749.687 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-10-04T05:25:49.687Z,1538630749.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:25:49.688Z,1538630749.688 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:25:49.689Z,1538630749.689 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-10-04T05:25:49.689Z,1538630749.689 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:25:49.702Z,1538630749.702 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:25:49.702Z,1538630749.702 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:25:50.125Z,1538630750.125 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:25:50.125Z,1538630750.125 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-10-04T05:25:50.126Z,1538630750.126 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:25:50.126Z,1538630750.126 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-10-04T05:25:50.504Z,1538630750.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:25:50.504Z,1538630750.504 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:25:50.504Z,1538630750.504 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:25:50.505Z,1538630750.505 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:25:50.505Z,1538630750.505 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:25:50.506Z,1538630750.506 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:27:01.476Z,1538630821.476 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T05:28:50.835Z,1538630930.835 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:28:50.835Z,1538630930.835 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-10-04T05:28:50.835Z,1538630930.835 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:28:50.837Z,1538630930.837 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:28:50.837Z,1538630930.837 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-10-04T05:28:50.837Z,1538630930.837 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:28:50.851Z,1538630930.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:28:50.851Z,1538630930.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:28:51.247Z,1538630931.247 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:28:51.247Z,1538630931.247 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-10-04T05:28:51.248Z,1538630931.248 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:28:51.248Z,1538630931.248 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-10-04T05:28:51.610Z,1538630931.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:28:51.611Z,1538630931.611 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:28:51.611Z,1538630931.611 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:28:51.611Z,1538630931.611 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:28:51.612Z,1538630931.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:28:51.612Z,1538630931.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:29:16.136Z,1538630956.136 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T05:29:16.136Z,1538630956.136 [Default:CheckIn:C.Wait] Stopped
2018-10-04T05:29:16.136Z,1538630956.136 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T05:29:16.136Z,1538630956.136 [Default:CheckIn:D] Running Loop=1
2018-10-04T05:29:16.503Z,1538630956.503 [Default:CheckIn:D] Stopped
2018-10-04T05:29:16.503Z,1538630956.503 [Default:CheckIn:E] Running Loop=1
2018-10-04T05:29:16.928Z,1538630956.928 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.812248 min 
2018-10-04T05:29:16.928Z,1538630956.928 [Default:CheckIn:E] Stopped
2018-10-04T05:29:16.928Z,1538630956.928 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T05:29:16.928Z,1538630956.928 [Default:CheckIn] Stopped
2018-10-04T05:29:16.929Z,1538630956.929 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T05:29:16.929Z,1538630956.929 [Default:CheckIn](INFO): Running loop #8
2018-10-04T05:29:16.929Z,1538630956.929 [Default:CheckIn] Running Loop=8
2018-10-04T05:29:16.929Z,1538630956.929 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T05:29:16.930Z,1538630956.930 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T05:29:49.355Z,1538630989.355 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T05:29:49.355Z,1538630989.355 [NAL9602] Data Fault, FailCount= 2
2018-10-04T05:29:49.355Z,1538630989.355 [NAL9602](ERROR): Data Fault
2018-10-04T05:29:49.408Z,1538630989.408 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T05:29:49.755Z,1538630989.755 [NAL9602](INFO): Powering down
2018-10-04T05:29:50.647Z,1538630990.647 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T05:29:50.647Z,1538630990.647 [NAL9602] No Fault, FailCount= 2
2018-10-04T05:30:19.827Z,1538631019.827 [NAL9602](INFO): Powering up NAL9602
2018-10-04T05:30:31.023Z,1538631031.023 [NAL9602](INFO): NAL9602 initialized
2018-10-04T05:31:51.843Z,1538631111.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:31:51.843Z,1538631111.843 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-10-04T05:31:51.843Z,1538631111.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:31:51.845Z,1538631111.845 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:31:51.845Z,1538631111.845 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-10-04T05:31:51.845Z,1538631111.845 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:31:51.876Z,1538631111.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:31:51.876Z,1538631111.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:31:52.241Z,1538631112.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:31:52.241Z,1538631112.241 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-10-04T05:31:52.242Z,1538631112.242 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:31:52.242Z,1538631112.242 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-10-04T05:31:52.630Z,1538631112.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:31:52.631Z,1538631112.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:31:52.631Z,1538631112.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:31:52.631Z,1538631112.631 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:31:52.632Z,1538631112.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:31:52.632Z,1538631112.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:34:18.617Z,1538631258.617 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T05:29:16.9Z
2018-10-04T05:34:18.617Z,1538631258.617 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T05:34:18.617Z,1538631258.617 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T05:34:23.569Z,1538631263.569 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0025.lzma
2018-10-04T05:34:24.328Z,1538631264.328 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0025.lzma.bak
2018-10-04T05:34:24.328Z,1538631264.328 [DataOverHttps](INFO): SBD MOMSN=8610592
2018-10-04T05:34:33.508Z,1538631273.508 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20181004T041305/Express0026.lzma
2018-10-04T05:34:34.272Z,1538631274.272 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0026.lzma.bak
2018-10-04T05:34:34.272Z,1538631274.272 [DataOverHttps](INFO): SBD MOMSN=8610594
2018-10-04T05:34:35.213Z,1538631275.213 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T05:34:35.213Z,1538631275.213 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T05:34:35.213Z,1538631275.213 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T05:34:53.052Z,1538631293.052 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:34:53.053Z,1538631293.053 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-10-04T05:34:53.053Z,1538631293.053 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:34:53.055Z,1538631293.055 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:34:53.055Z,1538631293.055 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-10-04T05:34:53.055Z,1538631293.055 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:34:53.084Z,1538631293.084 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:34:53.084Z,1538631293.084 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:34:53.462Z,1538631293.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:34:53.462Z,1538631293.462 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-10-04T05:34:53.463Z,1538631293.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:34:53.463Z,1538631293.463 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-10-04T05:34:53.843Z,1538631293.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:34:53.844Z,1538631293.844 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:34:53.844Z,1538631293.844 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:34:53.845Z,1538631293.845 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:34:53.845Z,1538631293.845 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:34:53.846Z,1538631293.846 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:37:54.163Z,1538631474.163 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:37:54.163Z,1538631474.163 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-10-04T05:37:54.163Z,1538631474.163 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:37:54.169Z,1538631474.169 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:37:54.169Z,1538631474.169 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-10-04T05:37:54.169Z,1538631474.169 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:37:54.191Z,1538631474.191 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:37:54.191Z,1538631474.191 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:37:54.586Z,1538631474.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:37:54.586Z,1538631474.586 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-10-04T05:37:54.587Z,1538631474.587 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:37:54.587Z,1538631474.587 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-10-04T05:37:54.986Z,1538631474.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:37:54.986Z,1538631474.986 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:37:54.987Z,1538631474.987 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:37:54.987Z,1538631474.987 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:37:54.987Z,1538631474.987 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:37:54.988Z,1538631474.988 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:38:41.448Z,1538631521.448 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T05:38:41.448Z,1538631521.448 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-3268,-32768,-32768,V
2018-10-04T05:39:35.704Z,1538631575.704 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T05:39:35.704Z,1538631575.704 [Default:CheckIn:C.Wait] Stopped
2018-10-04T05:39:35.705Z,1538631575.705 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T05:39:35.705Z,1538631575.705 [Default:CheckIn:D] Running Loop=1
2018-10-04T05:39:36.098Z,1538631576.098 [Default:CheckIn:D] Stopped
2018-10-04T05:39:36.098Z,1538631576.098 [Default:CheckIn:E] Running Loop=1
2018-10-04T05:39:36.487Z,1538631576.487 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 83.138826 min 
2018-10-04T05:39:36.487Z,1538631576.487 [Default:CheckIn:E] Stopped
2018-10-04T05:39:36.487Z,1538631576.487 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T05:39:36.488Z,1538631576.488 [Default:CheckIn] Stopped
2018-10-04T05:39:36.488Z,1538631576.488 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T05:39:36.488Z,1538631576.488 [Default:CheckIn](INFO): Running loop #9
2018-10-04T05:39:36.488Z,1538631576.488 [Default:CheckIn] Running Loop=9
2018-10-04T05:39:36.488Z,1538631576.488 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T05:39:36.488Z,1538631576.488 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T05:40:33.793Z,1538631633.793 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T05:40:33.794Z,1538631633.794 [NAL9602] Data Fault, FailCount= 3
2018-10-04T05:40:33.794Z,1538631633.794 [NAL9602](ERROR): Data Fault
2018-10-04T05:40:33.875Z,1538631633.875 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T05:40:34.195Z,1538631634.195 [NAL9602](INFO): Powering down
2018-10-04T05:40:35.079Z,1538631635.079 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T05:40:35.079Z,1538631635.079 [NAL9602] No Fault, FailCount= 3
2018-10-04T05:40:55.063Z,1538631655.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:40:55.063Z,1538631655.063 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-10-04T05:40:55.063Z,1538631655.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:40:55.065Z,1538631655.065 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:40:55.065Z,1538631655.065 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-10-04T05:40:55.065Z,1538631655.065 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:40:55.097Z,1538631655.097 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:40:55.098Z,1538631655.098 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:40:55.462Z,1538631655.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:40:55.462Z,1538631655.462 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-10-04T05:40:55.463Z,1538631655.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:40:55.463Z,1538631655.463 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-10-04T05:40:55.846Z,1538631655.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:40:55.846Z,1538631655.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:40:55.847Z,1538631655.847 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:40:55.847Z,1538631655.847 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:40:55.847Z,1538631655.847 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:40:55.848Z,1538631655.848 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:41:06.550Z,1538631666.550 [NAL9602](INFO): Powering up NAL9602
2018-10-04T05:41:17.471Z,1538631677.471 [NAL9602](INFO): NAL9602 initialized
2018-10-04T05:41:46.004Z,1538631706.004 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T05:43:55.917Z,1538631835.917 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:43:55.917Z,1538631835.917 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-10-04T05:43:55.918Z,1538631835.918 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:43:55.922Z,1538631835.922 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:43:55.922Z,1538631835.922 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-10-04T05:43:55.922Z,1538631835.922 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:43:55.944Z,1538631835.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:43:55.944Z,1538631835.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:43:56.304Z,1538631836.304 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:43:56.304Z,1538631836.304 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-10-04T05:43:56.317Z,1538631836.317 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:43:56.317Z,1538631836.317 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-10-04T05:43:56.684Z,1538631836.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:43:56.685Z,1538631836.685 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:43:56.689Z,1538631836.689 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:43:56.690Z,1538631836.690 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:43:56.690Z,1538631836.690 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:43:56.691Z,1538631836.691 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:44:38.405Z,1538631878.405 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T05:39:36.5Z
2018-10-04T05:44:38.405Z,1538631878.405 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T05:44:38.405Z,1538631878.405 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T05:44:43.347Z,1538631883.347 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0028.lzma
2018-10-04T05:44:44.140Z,1538631884.140 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0028.lzma.bak
2018-10-04T05:44:44.140Z,1538631884.140 [DataOverHttps](INFO): SBD MOMSN=8610598
2018-10-04T05:44:55.092Z,1538631895.092 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20181004T041305/Express0029.lzma
2018-10-04T05:44:55.597Z,1538631895.597 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0029.lzma.bak
2018-10-04T05:44:55.598Z,1538631895.598 [DataOverHttps](INFO): SBD MOMSN=8610600
2018-10-04T05:44:56.504Z,1538631896.504 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T05:44:56.504Z,1538631896.504 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T05:44:56.504Z,1538631896.504 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T05:46:56.901Z,1538632016.901 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:46:56.901Z,1538632016.901 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-10-04T05:46:56.901Z,1538632016.901 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:46:56.903Z,1538632016.903 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:46:56.903Z,1538632016.903 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-10-04T05:46:56.903Z,1538632016.903 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:46:56.916Z,1538632016.916 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:46:56.916Z,1538632016.916 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:46:57.308Z,1538632017.308 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:46:57.308Z,1538632017.308 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-10-04T05:46:57.308Z,1538632017.308 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:46:57.308Z,1538632017.308 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-10-04T05:46:57.698Z,1538632017.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:46:57.699Z,1538632017.699 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:46:57.699Z,1538632017.699 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:46:57.700Z,1538632017.700 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:46:57.700Z,1538632017.700 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:46:57.700Z,1538632017.700 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:48:57.092Z,1538632137.092 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T05:48:57.093Z,1538632137.093 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100322535, -0.1,   0.0,1448.9,  0
2018-10-04T05:49:56.933Z,1538632196.933 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T05:49:56.934Z,1538632196.934 [Default:CheckIn:C.Wait] Stopped
2018-10-04T05:49:56.934Z,1538632196.934 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T05:49:56.934Z,1538632196.934 [Default:CheckIn:D] Running Loop=1
2018-10-04T05:49:57.313Z,1538632197.313 [Default:CheckIn:D] Stopped
2018-10-04T05:49:57.313Z,1538632197.313 [Default:CheckIn:E] Running Loop=1
2018-10-04T05:49:57.723Z,1538632197.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:49:57.723Z,1538632197.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-10-04T05:49:57.723Z,1538632197.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:49:57.725Z,1538632197.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:49:57.725Z,1538632197.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-10-04T05:49:57.725Z,1538632197.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:49:57.728Z,1538632197.728 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 93.492415 min 
2018-10-04T05:49:57.728Z,1538632197.728 [Default:CheckIn:E] Stopped
2018-10-04T05:49:57.728Z,1538632197.728 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T05:49:57.728Z,1538632197.728 [Default:CheckIn] Stopped
2018-10-04T05:49:57.728Z,1538632197.728 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T05:49:57.728Z,1538632197.728 [Default:CheckIn](INFO): Running loop #10
2018-10-04T05:49:57.729Z,1538632197.729 [Default:CheckIn] Running Loop=10
2018-10-04T05:49:57.729Z,1538632197.729 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T05:49:57.729Z,1538632197.729 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T05:49:57.787Z,1538632197.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:49:57.787Z,1538632197.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:49:58.161Z,1538632198.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:49:58.161Z,1538632198.161 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-10-04T05:49:58.162Z,1538632198.162 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:49:58.162Z,1538632198.162 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-10-04T05:49:58.530Z,1538632198.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:49:58.530Z,1538632198.530 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:49:58.531Z,1538632198.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:49:58.531Z,1538632198.531 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:49:58.531Z,1538632198.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:49:58.532Z,1538632198.532 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:51:18.687Z,1538632278.687 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T05:51:18.687Z,1538632278.687 [NAL9602] Data Fault, FailCount= 4
2018-10-04T05:51:18.687Z,1538632278.687 [NAL9602](ERROR): Data Fault
2018-10-04T05:51:18.756Z,1538632278.756 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T05:51:19.091Z,1538632279.091 [NAL9602](INFO): Powering down
2018-10-04T05:51:19.981Z,1538632279.981 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T05:51:19.981Z,1538632279.981 [NAL9602] No Fault, FailCount= 4
2018-10-04T05:51:49.149Z,1538632309.149 [NAL9602](INFO): Powering up NAL9602
2018-10-04T05:52:00.339Z,1538632320.339 [NAL9602](INFO): NAL9602 initialized
2018-10-04T05:52:40.153Z,1538632360.153 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T05:52:58.573Z,1538632378.573 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:52:58.573Z,1538632378.573 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-10-04T05:52:58.574Z,1538632378.574 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:52:58.575Z,1538632378.575 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:52:58.576Z,1538632378.576 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-10-04T05:52:58.576Z,1538632378.576 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:52:58.588Z,1538632378.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:52:58.589Z,1538632378.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:52:58.000Z,1538632379.000 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:52:59.000Z,1538632379.000 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-10-04T05:52:59.001Z,1538632379.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:52:59.005Z,1538632379.005 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-10-04T05:52:59.390Z,1538632379.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:52:59.390Z,1538632379.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:52:59.391Z,1538632379.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:52:59.391Z,1538632379.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:52:59.391Z,1538632379.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:52:59.392Z,1538632379.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:55:00.107Z,1538632500.107 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T05:49:57.7Z
2018-10-04T05:55:00.107Z,1538632500.107 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T05:55:00.107Z,1538632500.107 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T05:55:05.047Z,1538632505.047 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0031.lzma
2018-10-04T05:55:06.507Z,1538632506.507 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0031.lzma.bak
2018-10-04T05:55:06.507Z,1538632506.507 [DataOverHttps](INFO): SBD MOMSN=8610604
2018-10-04T05:55:15.468Z,1538632515.468 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0032.lzma
2018-10-04T05:55:16.224Z,1538632516.224 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0032.lzma.bak
2018-10-04T05:55:16.224Z,1538632516.224 [DataOverHttps](INFO): SBD MOMSN=8610606
2018-10-04T05:55:17.162Z,1538632517.162 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T05:55:17.162Z,1538632517.162 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T05:55:17.162Z,1538632517.162 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T05:55:59.469Z,1538632559.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:55:59.469Z,1538632559.469 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-10-04T05:55:59.469Z,1538632559.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:55:59.471Z,1538632559.471 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:55:59.471Z,1538632559.471 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-10-04T05:55:59.471Z,1538632559.471 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:55:59.484Z,1538632559.484 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:55:59.485Z,1538632559.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:55:59.862Z,1538632559.862 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:55:59.863Z,1538632559.863 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-10-04T05:55:59.863Z,1538632559.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:55:59.863Z,1538632559.863 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-10-04T05:56:00.252Z,1538632560.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:56:00.269Z,1538632560.269 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:56:00.269Z,1538632560.269 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:56:00.270Z,1538632560.270 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:56:00.270Z,1538632560.270 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:56:00.271Z,1538632560.271 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:57:19.247Z,1538632639.247 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T05:57:19.248Z,1538632639.248 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768V
2018-10-04T05:59:00.328Z,1538632740.328 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:59:00.328Z,1538632740.328 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-10-04T05:59:00.328Z,1538632740.328 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T05:59:00.331Z,1538632740.331 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T05:59:00.331Z,1538632740.331 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-10-04T05:59:00.331Z,1538632740.331 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T05:59:00.345Z,1538632740.345 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T05:59:00.346Z,1538632740.346 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T05:59:00.740Z,1538632740.740 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T05:59:00.740Z,1538632740.740 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-10-04T05:59:00.745Z,1538632740.745 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T05:59:00.745Z,1538632740.745 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-10-04T05:59:01.138Z,1538632741.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T05:59:01.138Z,1538632741.138 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:59:01.139Z,1538632741.139 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T05:59:01.139Z,1538632741.139 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T05:59:01.140Z,1538632741.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T05:59:01.140Z,1538632741.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:00:17.673Z,1538632817.673 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T06:00:17.673Z,1538632817.673 [Default:CheckIn:C.Wait] Stopped
2018-10-04T06:00:17.673Z,1538632817.673 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T06:00:17.673Z,1538632817.673 [Default:CheckIn:D] Running Loop=1
2018-10-04T06:00:18.080Z,1538632818.080 [Default:CheckIn:D] Stopped
2018-10-04T06:00:18.080Z,1538632818.080 [Default:CheckIn:E] Running Loop=1
2018-10-04T06:00:18.462Z,1538632818.462 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.838534 min 
2018-10-04T06:00:18.462Z,1538632818.462 [Default:CheckIn:E] Stopped
2018-10-04T06:00:18.462Z,1538632818.462 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T06:00:18.462Z,1538632818.462 [Default:CheckIn] Stopped
2018-10-04T06:00:18.462Z,1538632818.462 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T06:00:18.463Z,1538632818.463 [Default:CheckIn](INFO): Running loop #11
2018-10-04T06:00:18.463Z,1538632818.463 [Default:CheckIn] Running Loop=11
2018-10-04T06:00:18.463Z,1538632818.463 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T06:00:18.463Z,1538632818.463 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T06:02:01.258Z,1538632921.258 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:02:01.259Z,1538632921.259 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-10-04T06:02:01.259Z,1538632921.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:02:01.261Z,1538632921.261 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:02:01.265Z,1538632921.265 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-10-04T06:02:01.265Z,1538632921.265 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:02:01.297Z,1538632921.297 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:02:01.298Z,1538632921.298 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:02:01.638Z,1538632921.638 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:02:01.638Z,1538632921.638 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-10-04T06:02:01.638Z,1538632921.638 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:02:01.638Z,1538632921.638 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-10-04T06:02:02.002Z,1538632922.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:02:02.002Z,1538632922.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:02:02.003Z,1538632922.003 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:02:02.003Z,1538632922.003 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:02:02.004Z,1538632922.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:02:02.004Z,1538632922.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:02:03.955Z,1538632923.955 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T06:02:03.955Z,1538632923.955 [NAL9602] Data Fault, FailCount= 5
2018-10-04T06:02:03.955Z,1538632923.955 [NAL9602](ERROR): Data Fault
2018-10-04T06:02:04.043Z,1538632924.043 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T06:02:04.044Z,1538632924.044 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T06:02:04.351Z,1538632924.351 [NAL9602](INFO): Powering down
2018-10-04T06:02:04.419Z,1538632924.419 [CBIT](INFO): Critical error at 20181004T060204
2018-10-04T06:04:04.208Z,1538633044.208 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T06:04:04.208Z,1538633044.208 [NAL9602] No Fault, FailCount= 5
2018-10-04T06:04:04.555Z,1538633044.555 [NAL9602](INFO): Powering up NAL9602
2018-10-04T06:04:15.479Z,1538633055.479 [NAL9602](INFO): NAL9602 initialized
2018-10-04T06:05:02.006Z,1538633102.006 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:05:02.006Z,1538633102.006 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-10-04T06:05:02.006Z,1538633102.006 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:05:02.008Z,1538633102.008 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:05:02.008Z,1538633102.008 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-10-04T06:05:02.008Z,1538633102.008 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:05:02.041Z,1538633102.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:05:02.042Z,1538633102.042 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:05:02.411Z,1538633102.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:05:02.411Z,1538633102.411 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-10-04T06:05:02.412Z,1538633102.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:05:02.412Z,1538633102.412 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-10-04T06:05:02.817Z,1538633102.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:05:02.818Z,1538633102.818 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:05:02.818Z,1538633102.818 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:05:02.819Z,1538633102.819 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:05:02.819Z,1538633102.819 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:05:02.819Z,1538633102.819 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:05:20.804Z,1538633120.804 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T06:00:18.5Z
2018-10-04T06:05:20.804Z,1538633120.804 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T06:05:20.804Z,1538633120.804 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T06:05:25.743Z,1538633125.743 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0034.lzma
2018-10-04T06:05:26.509Z,1538633126.509 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0034.lzma.bak
2018-10-04T06:05:26.509Z,1538633126.509 [DataOverHttps](INFO): SBD MOMSN=8610610
2018-10-04T06:05:27.419Z,1538633127.419 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe, 15.887, -0.003, 0.000
2018-10-04T06:05:35.689Z,1538633135.689 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0035.lzma
2018-10-04T06:05:36.448Z,1538633136.448 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0035.lzma.bak
2018-10-04T06:05:36.448Z,1538633136.448 [DataOverHttps](INFO): SBD MOMSN=8610613
2018-10-04T06:05:37.361Z,1538633137.361 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T06:05:37.377Z,1538633137.377 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T06:05:37.377Z,1538633137.377 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T06:08:02.998Z,1538633282.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:08:02.998Z,1538633282.998 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-10-04T06:08:02.998Z,1538633282.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:08:03.000Z,1538633283.000 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:08:03.000Z,1538633283.000 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-10-04T06:08:03.000Z,1538633283.000 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:08:03.040Z,1538633283.040 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:08:03.040Z,1538633283.040 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:08:03.388Z,1538633283.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:08:03.388Z,1538633283.388 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-10-04T06:08:03.393Z,1538633283.393 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:08:03.393Z,1538633283.393 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-10-04T06:08:03.772Z,1538633283.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:08:03.777Z,1538633283.777 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:08:03.777Z,1538633283.777 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:08:03.778Z,1538633283.778 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:08:03.778Z,1538633283.778 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:08:03.779Z,1538633283.779 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:09:13.969Z,1538633353.969 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,6938.94
2018-10-04T06:10:37.818Z,1538633437.818 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T06:10:37.818Z,1538633437.818 [Default:CheckIn:C.Wait] Stopped
2018-10-04T06:10:37.818Z,1538633437.818 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T06:10:37.818Z,1538633437.818 [Default:CheckIn:D] Running Loop=1
2018-10-04T06:10:38.205Z,1538633438.205 [Default:CheckIn:D] Stopped
2018-10-04T06:10:38.205Z,1538633438.205 [Default:CheckIn:E] Running Loop=1
2018-10-04T06:10:38.601Z,1538633438.601 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 114.173942 min 
2018-10-04T06:10:38.601Z,1538633438.601 [Default:CheckIn:E] Stopped
2018-10-04T06:10:38.601Z,1538633438.601 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T06:10:38.602Z,1538633438.602 [Default:CheckIn] Stopped
2018-10-04T06:10:38.602Z,1538633438.602 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T06:10:38.602Z,1538633438.602 [Default:CheckIn](INFO): Running loop #12
2018-10-04T06:10:38.602Z,1538633438.602 [Default:CheckIn] Running Loop=12
2018-10-04T06:10:38.602Z,1538633438.602 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T06:10:38.602Z,1538633438.602 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T06:11:03.890Z,1538633463.890 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:11:03.891Z,1538633463.891 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-10-04T06:11:03.891Z,1538633463.891 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:11:03.913Z,1538633463.913 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:11:03.913Z,1538633463.913 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-10-04T06:11:03.913Z,1538633463.913 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:11:03.947Z,1538633463.947 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:11:03.947Z,1538633463.947 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:11:04.298Z,1538633464.298 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:11:04.298Z,1538633464.298 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-10-04T06:11:04.299Z,1538633464.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:11:04.299Z,1538633464.299 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-10-04T06:11:04.710Z,1538633464.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:11:04.710Z,1538633464.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:11:04.711Z,1538633464.711 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:11:04.711Z,1538633464.711 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:11:04.712Z,1538633464.712 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:11:04.712Z,1538633464.712 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:14:04.737Z,1538633644.737 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:14:04.737Z,1538633644.737 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-10-04T06:14:04.737Z,1538633644.737 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:14:04.739Z,1538633644.739 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:14:04.739Z,1538633644.739 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-10-04T06:14:04.739Z,1538633644.739 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:14:04.771Z,1538633644.771 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:14:04.773Z,1538633644.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:14:05.106Z,1538633645.106 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:14:05.106Z,1538633645.106 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-10-04T06:14:05.107Z,1538633645.107 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:14:05.107Z,1538633645.107 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-10-04T06:14:05.496Z,1538633645.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:14:05.496Z,1538633645.496 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:14:05.497Z,1538633645.497 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:14:05.497Z,1538633645.497 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:14:05.498Z,1538633645.498 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:14:05.498Z,1538633645.498 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:14:17.439Z,1538633657.439 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T06:14:17.439Z,1538633657.439 [NAL9602] Data Fault, FailCount= 1
2018-10-04T06:14:17.439Z,1538633657.439 [NAL9602](ERROR): Data Fault
2018-10-04T06:14:17.514Z,1538633657.514 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T06:14:17.839Z,1538633657.839 [NAL9602](INFO): Powering down
2018-10-04T06:14:18.733Z,1538633658.733 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T06:14:18.733Z,1538633658.733 [NAL9602] No Fault, FailCount= 1
2018-10-04T06:14:47.896Z,1538633687.896 [NAL9602](INFO): Powering up NAL9602
2018-10-04T06:14:59.095Z,1538633699.095 [NAL9602](INFO): NAL9602 initialized
2018-10-04T06:15:40.828Z,1538633740.828 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T06:10:38.6Z
2018-10-04T06:15:40.828Z,1538633740.828 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T06:15:40.828Z,1538633740.828 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T06:15:45.810Z,1538633745.810 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0037.lzma
2018-10-04T06:15:46.581Z,1538633746.581 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0037.lzma.bak
2018-10-04T06:15:46.582Z,1538633746.582 [DataOverHttps](INFO): SBD MOMSN=8610617
2018-10-04T06:15:55.747Z,1538633755.747 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0038.lzma
2018-10-04T06:15:56.500Z,1538633756.500 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0038.lzma.bak
2018-10-04T06:15:56.500Z,1538633756.500 [DataOverHttps](INFO): SBD MOMSN=8610619
2018-10-04T06:15:57.421Z,1538633757.421 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T06:15:57.437Z,1538633757.437 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T06:15:57.437Z,1538633757.437 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T06:15:57.437Z,1538633757.437 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T06:17:05.856Z,1538633825.856 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:17:05.857Z,1538633825.857 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-10-04T06:17:05.857Z,1538633825.857 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:17:05.859Z,1538633825.859 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:17:05.859Z,1538633825.859 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-10-04T06:17:05.859Z,1538633825.859 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:17:05.885Z,1538633825.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:17:05.885Z,1538633825.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:17:06.245Z,1538633826.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:17:06.249Z,1538633826.249 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-10-04T06:17:06.249Z,1538633826.249 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:17:06.249Z,1538633826.249 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-10-04T06:17:06.647Z,1538633826.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:17:06.648Z,1538633826.648 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:17:06.648Z,1538633826.648 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:17:06.654Z,1538633826.654 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:17:06.655Z,1538633826.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:17:06.655Z,1538633826.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:17:47.985Z,1538633867.985 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.880, 0.005, 65.535
2018-10-04T06:20:07.823Z,1538634007.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:20:07.823Z,1538634007.823 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-10-04T06:20:07.823Z,1538634007.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:20:07.825Z,1538634007.825 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:20:07.825Z,1538634007.825 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-10-04T06:20:07.825Z,1538634007.825 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:20:07.838Z,1538634007.838 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:20:07.839Z,1538634007.839 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:20:07.979Z,1538634007.979 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:20:07.979Z,1538634007.979 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-10-04T06:20:07.979Z,1538634007.979 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:20:07.979Z,1538634007.979 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-10-04T06:20:08.294Z,1538634008.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:20:08.294Z,1538634008.294 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:20:08.295Z,1538634008.295 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:20:08.295Z,1538634008.295 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:20:08.295Z,1538634008.295 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:20:08.296Z,1538634008.296 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:20:57.589Z,1538634057.589 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T06:20:57.593Z,1538634057.593 [Default:CheckIn:C.Wait] Stopped
2018-10-04T06:20:57.593Z,1538634057.593 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T06:20:57.593Z,1538634057.593 [Default:CheckIn:D] Running Loop=1
2018-10-04T06:20:57.987Z,1538634057.987 [Default:CheckIn:D] Stopped
2018-10-04T06:20:57.987Z,1538634057.987 [Default:CheckIn:E] Running Loop=1
2018-10-04T06:20:58.381Z,1538634058.381 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 124.503646 min 
2018-10-04T06:20:58.381Z,1538634058.381 [Default:CheckIn:E] Stopped
2018-10-04T06:20:58.382Z,1538634058.382 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T06:20:58.382Z,1538634058.382 [Default:CheckIn] Stopped
2018-10-04T06:20:58.382Z,1538634058.382 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T06:20:58.382Z,1538634058.382 [Default:CheckIn](INFO): Running loop #13
2018-10-04T06:20:58.382Z,1538634058.382 [Default:CheckIn] Running Loop=13
2018-10-04T06:20:58.382Z,1538634058.382 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T06:20:58.382Z,1538634058.382 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T06:23:08.455Z,1538634188.455 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:23:08.455Z,1538634188.455 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-10-04T06:23:08.455Z,1538634188.455 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:23:08.461Z,1538634188.461 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:23:08.461Z,1538634188.461 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-10-04T06:23:08.461Z,1538634188.461 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:23:08.491Z,1538634188.491 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:23:08.491Z,1538634188.491 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:23:08.887Z,1538634188.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:23:08.887Z,1538634188.887 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-10-04T06:23:08.887Z,1538634188.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:23:08.887Z,1538634188.887 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-10-04T06:23:09.240Z,1538634189.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:23:09.241Z,1538634189.241 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:23:09.241Z,1538634189.241 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:23:09.242Z,1538634189.242 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:23:09.242Z,1538634189.242 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:23:09.243Z,1538634189.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:25:00.755Z,1538634300.755 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T06:25:00.755Z,1538634300.755 [NAL9602] Data Fault, FailCount= 2
2018-10-04T06:25:00.755Z,1538634300.755 [NAL9602](ERROR): Data Fault
2018-10-04T06:25:00.828Z,1538634300.828 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T06:25:01.155Z,1538634301.155 [NAL9602](INFO): Powering down
2018-10-04T06:25:02.042Z,1538634302.042 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T06:25:02.042Z,1538634302.042 [NAL9602] No Fault, FailCount= 2
2018-10-04T06:25:31.243Z,1538634331.243 [NAL9602](INFO): Powering up NAL9602
2018-10-04T06:25:42.035Z,1538634342.035 [NAL9602](INFO): NAL9602 initialized
2018-10-04T06:26:00.853Z,1538634360.853 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T06:20:58.4Z
2018-10-04T06:26:00.854Z,1538634360.854 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T06:26:00.854Z,1538634360.854 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T06:26:05.831Z,1538634365.831 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0040.lzma
2018-10-04T06:26:06.608Z,1538634366.608 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0040.lzma.bak
2018-10-04T06:26:06.608Z,1538634366.608 [DataOverHttps](INFO): SBD MOMSN=8610623
2018-10-04T06:26:10.774Z,1538634370.774 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:26:10.774Z,1538634370.774 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-10-04T06:26:10.774Z,1538634370.774 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:26:10.776Z,1538634370.776 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:26:10.776Z,1538634370.776 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-10-04T06:26:10.776Z,1538634370.776 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:26:10.828Z,1538634370.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:26:10.828Z,1538634370.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:26:10.934Z,1538634370.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:26:10.934Z,1538634370.934 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-10-04T06:26:10.935Z,1538634370.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:26:10.935Z,1538634370.935 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-10-04T06:26:11.299Z,1538634371.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:26:11.300Z,1538634371.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:26:11.300Z,1538634371.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:26:11.301Z,1538634371.301 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:26:11.301Z,1538634371.301 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:26:11.302Z,1538634371.302 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:26:21.366Z,1538634381.366 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0041.lzma
2018-10-04T06:26:22.925Z,1538634382.925 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0041.lzma.bak
2018-10-04T06:26:22.925Z,1538634382.925 [DataOverHttps](INFO): SBD MOMSN=8610625
2018-10-04T06:26:23.696Z,1538634383.696 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T06:26:23.696Z,1538634383.696 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T06:26:23.696Z,1538634383.696 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T06:29:11.399Z,1538634551.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:29:11.399Z,1538634551.399 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-10-04T06:29:11.399Z,1538634551.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:29:11.405Z,1538634551.405 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:29:11.405Z,1538634551.405 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-10-04T06:29:11.405Z,1538634551.405 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:29:11.427Z,1538634551.427 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:29:11.427Z,1538634551.427 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:29:11.843Z,1538634551.843 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:29:11.843Z,1538634551.843 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-10-04T06:29:11.844Z,1538634551.844 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:29:11.844Z,1538634551.844 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-10-04T06:29:12.206Z,1538634552.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:29:12.207Z,1538634552.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:29:12.207Z,1538634552.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:29:12.208Z,1538634552.208 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:29:12.208Z,1538634552.208 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:29:12.209Z,1538634552.209 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:31:24.108Z,1538634684.108 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T06:31:24.109Z,1538634684.109 [Default:CheckIn:C.Wait] Stopped
2018-10-04T06:31:24.109Z,1538634684.109 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T06:31:24.109Z,1538634684.109 [Default:CheckIn:D] Running Loop=1
2018-10-04T06:31:24.488Z,1538634684.488 [Default:CheckIn:D] Stopped
2018-10-04T06:31:24.488Z,1538634684.488 [Default:CheckIn:E] Running Loop=1
2018-10-04T06:31:24.883Z,1538634684.883 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 134.945337 min 
2018-10-04T06:31:24.884Z,1538634684.884 [Default:CheckIn:E] Stopped
2018-10-04T06:31:24.884Z,1538634684.884 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T06:31:24.884Z,1538634684.884 [Default:CheckIn] Stopped
2018-10-04T06:31:24.884Z,1538634684.884 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T06:31:24.884Z,1538634684.884 [Default:CheckIn](INFO): Running loop #14
2018-10-04T06:31:24.884Z,1538634684.884 [Default:CheckIn] Running Loop=14
2018-10-04T06:31:24.884Z,1538634684.884 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T06:31:24.884Z,1538634684.884 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T06:32:12.575Z,1538634732.575 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:32:12.575Z,1538634732.575 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-10-04T06:32:12.575Z,1538634732.575 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:32:12.581Z,1538634732.581 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:32:12.582Z,1538634732.582 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-10-04T06:32:12.582Z,1538634732.582 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:32:12.604Z,1538634732.604 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:32:12.604Z,1538634732.604 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:32:13.038Z,1538634733.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:32:13.038Z,1538634733.038 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-10-04T06:32:13.038Z,1538634733.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:32:13.039Z,1538634733.039 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-10-04T06:32:13.402Z,1538634733.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:32:13.402Z,1538634733.402 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:32:13.403Z,1538634733.403 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:32:13.403Z,1538634733.403 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:32:13.403Z,1538634733.403 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:32:13.404Z,1538634733.404 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:34:31.953Z,1538634871.953 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T06:34:43.993Z,1538634883.993 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T06:35:16.013Z,1538634916.013 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:35:16.013Z,1538634916.013 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-10-04T06:35:16.013Z,1538634916.013 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:35:16.015Z,1538634916.015 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:35:16.015Z,1538634916.015 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-10-04T06:35:16.015Z,1538634916.015 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:35:16.029Z,1538634916.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:35:16.029Z,1538634916.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:35:16.143Z,1538634916.143 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:35:16.143Z,1538634916.143 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-10-04T06:35:16.144Z,1538634916.144 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:35:16.144Z,1538634916.144 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-10-04T06:35:16.481Z,1538634916.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:35:16.482Z,1538634916.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:35:16.482Z,1538634916.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:35:16.483Z,1538634916.483 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:35:16.483Z,1538634916.483 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:35:16.484Z,1538634916.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:35:44.855Z,1538634944.855 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T06:35:44.855Z,1538634944.855 [NAL9602] Data Fault, FailCount= 3
2018-10-04T06:35:44.855Z,1538634944.855 [NAL9602](ERROR): Data Fault
2018-10-04T06:35:44.940Z,1538634944.940 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T06:35:45.251Z,1538634945.251 [NAL9602](INFO): Powering down
2018-10-04T06:35:46.113Z,1538634946.113 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T06:35:46.113Z,1538634946.113 [NAL9602] No Fault, FailCount= 3
2018-10-04T06:36:15.343Z,1538634975.343 [NAL9602](INFO): Powering up NAL9602
2018-10-04T06:36:26.839Z,1538634986.839 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T06:31:24.9Z
2018-10-04T06:36:26.839Z,1538634986.839 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T06:36:26.839Z,1538634986.839 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T06:36:27.972Z,1538634987.972 [NAL9602](INFO): NAL9602 initialized
2018-10-04T06:36:33.222Z,1538634993.222 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0043.lzma
2018-10-04T06:36:33.000Z,1538634994.000 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0043.lzma.bak
2018-10-04T06:36:33.000Z,1538634994.000 [DataOverHttps](INFO): SBD MOMSN=8610629
2018-10-04T06:36:43.226Z,1538635003.226 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0044.lzma
2018-10-04T06:36:43.996Z,1538635003.996 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0044.lzma.bak
2018-10-04T06:36:43.996Z,1538635003.996 [DataOverHttps](INFO): SBD MOMSN=8610631
2018-10-04T06:36:44.935Z,1538635004.935 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T06:36:44.935Z,1538635004.935 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T06:36:44.936Z,1538635004.936 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T06:38:16.900Z,1538635096.900 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:38:16.900Z,1538635096.900 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-10-04T06:38:16.900Z,1538635096.900 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:38:16.902Z,1538635096.902 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:38:16.902Z,1538635096.902 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-10-04T06:38:16.902Z,1538635096.902 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:38:16.928Z,1538635096.928 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:38:16.928Z,1538635096.928 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:38:17.320Z,1538635097.320 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:38:17.320Z,1538635097.320 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-10-04T06:38:17.321Z,1538635097.321 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:38:17.321Z,1538635097.321 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-10-04T06:38:17.713Z,1538635097.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:38:17.714Z,1538635097.714 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:38:17.714Z,1538635097.714 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:38:17.714Z,1538635097.714 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:38:17.715Z,1538635097.715 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:38:17.715Z,1538635097.715 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:41:17.843Z,1538635277.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:41:17.843Z,1538635277.843 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-10-04T06:41:17.843Z,1538635277.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:41:17.853Z,1538635277.853 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:41:17.854Z,1538635277.854 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-10-04T06:41:17.854Z,1538635277.854 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:41:17.884Z,1538635277.884 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:41:17.884Z,1538635277.884 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:41:18.269Z,1538635278.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:41:18.270Z,1538635278.270 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-10-04T06:41:18.270Z,1538635278.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:41:18.270Z,1538635278.270 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-10-04T06:41:18.634Z,1538635278.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:41:18.635Z,1538635278.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:41:18.635Z,1538635278.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:41:18.635Z,1538635278.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:41:18.636Z,1538635278.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:41:18.636Z,1538635278.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:41:45.349Z,1538635305.349 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T06:41:45.353Z,1538635305.353 [Default:CheckIn:C.Wait] Stopped
2018-10-04T06:41:45.353Z,1538635305.353 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T06:41:45.353Z,1538635305.353 [Default:CheckIn:D] Running Loop=1
2018-10-04T06:41:45.753Z,1538635305.753 [Default:CheckIn:D] Stopped
2018-10-04T06:41:45.753Z,1538635305.753 [Default:CheckIn:E] Running Loop=1
2018-10-04T06:41:46.144Z,1538635306.144 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 145.299756 min 
2018-10-04T06:41:46.144Z,1538635306.144 [Default:CheckIn:E] Stopped
2018-10-04T06:41:46.145Z,1538635306.145 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T06:41:46.145Z,1538635306.145 [Default:CheckIn] Stopped
2018-10-04T06:41:46.145Z,1538635306.145 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T06:41:46.145Z,1538635306.145 [Default:CheckIn](INFO): Running loop #15
2018-10-04T06:41:46.145Z,1538635306.145 [Default:CheckIn] Running Loop=15
2018-10-04T06:41:46.145Z,1538635306.145 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T06:41:46.146Z,1538635306.146 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T06:44:18.951Z,1538635458.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:44:18.951Z,1538635458.951 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-10-04T06:44:18.951Z,1538635458.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:44:18.957Z,1538635458.957 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:44:18.957Z,1538635458.957 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-10-04T06:44:18.958Z,1538635458.958 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:44:18.980Z,1538635458.980 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:44:18.981Z,1538635458.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:44:19.344Z,1538635459.344 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:44:19.344Z,1538635459.344 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-10-04T06:44:19.345Z,1538635459.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:44:19.345Z,1538635459.345 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-10-04T06:44:19.714Z,1538635459.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:44:19.714Z,1538635459.714 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:44:19.715Z,1538635459.715 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:44:19.715Z,1538635459.715 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:44:19.715Z,1538635459.715 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:44:19.716Z,1538635459.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:45:03.898Z,1538635503.898 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8b,0ffd, 15.880, -0.001, 0.000
2018-10-04T06:46:28.839Z,1538635588.839 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T06:46:28.839Z,1538635588.839 [NAL9602] Data Fault, FailCount= 4
2018-10-04T06:46:28.839Z,1538635588.839 [NAL9602](ERROR): Data Fault
2018-10-04T06:46:28.950Z,1538635588.950 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T06:46:29.256Z,1538635589.256 [NAL9602](INFO): Powering down
2018-10-04T06:46:30.110Z,1538635590.110 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T06:46:30.111Z,1538635590.111 [NAL9602] No Fault, FailCount= 4
2018-10-04T06:46:48.461Z,1538635608.461 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T06:41:46.1Z
2018-10-04T06:46:48.461Z,1538635608.461 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T06:46:48.461Z,1538635608.461 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T06:46:53.451Z,1538635613.451 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0046.lzma
2018-10-04T06:46:54.212Z,1538635614.212 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0046.lzma.bak
2018-10-04T06:46:54.212Z,1538635614.212 [DataOverHttps](INFO): SBD MOMSN=8610635
2018-10-04T06:46:59.419Z,1538635619.419 [NAL9602](INFO): Powering up NAL9602
2018-10-04T06:47:03.880Z,1538635623.880 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0047.lzma
2018-10-04T06:47:04.676Z,1538635624.676 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0047.lzma.bak
2018-10-04T06:47:04.676Z,1538635624.676 [DataOverHttps](INFO): SBD MOMSN=8610637
2018-10-04T06:47:05.687Z,1538635625.687 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T06:47:05.687Z,1538635625.687 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T06:47:05.687Z,1538635625.687 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T06:47:10.219Z,1538635630.219 [NAL9602](INFO): NAL9602 initialized
2018-10-04T06:47:19.867Z,1538635639.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:47:19.867Z,1538635639.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-10-04T06:47:19.867Z,1538635639.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:47:19.873Z,1538635639.873 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:47:19.873Z,1538635639.873 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-10-04T06:47:19.873Z,1538635639.873 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:47:19.895Z,1538635639.895 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:47:19.895Z,1538635639.895 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:47:20.308Z,1538635640.308 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:47:20.309Z,1538635640.309 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-10-04T06:47:20.313Z,1538635640.313 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:47:20.313Z,1538635640.313 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-10-04T06:47:20.675Z,1538635640.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:47:20.676Z,1538635640.676 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:47:20.676Z,1538635640.676 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:47:20.676Z,1538635640.676 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:47:20.677Z,1538635640.677 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:47:20.677Z,1538635640.677 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:50:20.791Z,1538635820.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:50:20.791Z,1538635820.791 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-10-04T06:50:20.791Z,1538635820.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:50:20.797Z,1538635820.797 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:50:20.797Z,1538635820.797 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-10-04T06:50:20.797Z,1538635820.797 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:50:20.815Z,1538635820.815 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:50:20.815Z,1538635820.815 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:50:21.235Z,1538635821.235 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:50:21.235Z,1538635821.235 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-10-04T06:50:21.236Z,1538635821.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:50:21.236Z,1538635821.236 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-10-04T06:50:21.588Z,1538635821.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:50:21.588Z,1538635821.588 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:50:21.593Z,1538635821.593 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:50:21.593Z,1538635821.593 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:50:21.594Z,1538635821.594 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:50:21.595Z,1538635821.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:52:05.907Z,1538635925.907 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T06:52:05.907Z,1538635925.907 [Default:CheckIn:C.Wait] Stopped
2018-10-04T06:52:05.907Z,1538635925.907 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T06:52:05.907Z,1538635925.907 [Default:CheckIn:D] Running Loop=1
2018-10-04T06:52:06.309Z,1538635926.309 [Default:CheckIn:D] Stopped
2018-10-04T06:52:06.309Z,1538635926.309 [Default:CheckIn:E] Running Loop=1
2018-10-04T06:52:06.731Z,1538635926.731 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 155.642285 min 
2018-10-04T06:52:06.731Z,1538635926.731 [Default:CheckIn:E] Stopped
2018-10-04T06:52:06.731Z,1538635926.731 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T06:52:06.732Z,1538635926.732 [Default:CheckIn] Stopped
2018-10-04T06:52:06.732Z,1538635926.732 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T06:52:06.732Z,1538635926.732 [Default:CheckIn](INFO): Running loop #16
2018-10-04T06:52:06.732Z,1538635926.732 [Default:CheckIn] Running Loop=16
2018-10-04T06:52:06.732Z,1538635926.732 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T06:52:06.732Z,1538635926.732 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T06:53:21.712Z,1538636001.712 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:53:21.712Z,1538636001.712 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-10-04T06:53:21.712Z,1538636001.712 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:53:21.718Z,1538636001.718 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:53:21.719Z,1538636001.719 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-10-04T06:53:21.719Z,1538636001.719 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:53:21.744Z,1538636001.744 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:53:21.749Z,1538636001.749 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:53:22.103Z,1538636002.103 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:53:22.103Z,1538636002.103 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-10-04T06:53:22.104Z,1538636002.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:53:22.104Z,1538636002.104 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-10-04T06:53:22.478Z,1538636002.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:53:22.478Z,1538636002.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:53:22.478Z,1538636002.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:53:22.479Z,1538636002.479 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:53:22.479Z,1538636002.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:53:22.480Z,1538636002.480 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:56:22.727Z,1538636182.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:56:22.727Z,1538636182.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-10-04T06:56:22.727Z,1538636182.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:56:22.733Z,1538636182.733 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:56:22.733Z,1538636182.733 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-10-04T06:56:22.734Z,1538636182.734 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:56:22.779Z,1538636182.779 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:56:22.779Z,1538636182.779 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:56:23.135Z,1538636183.135 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:56:23.135Z,1538636183.135 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-10-04T06:56:23.136Z,1538636183.136 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:56:23.136Z,1538636183.136 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-10-04T06:56:23.494Z,1538636183.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:56:23.494Z,1538636183.494 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:56:23.495Z,1538636183.495 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:56:23.495Z,1538636183.495 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:56:23.495Z,1538636183.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:56:23.496Z,1538636183.496 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:57:09.523Z,1538636229.523 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T06:52:06.7Z
2018-10-04T06:57:09.523Z,1538636229.523 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T06:57:09.523Z,1538636229.523 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T06:57:14.464Z,1538636234.464 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0049.lzma
2018-10-04T06:57:14.869Z,1538636234.869 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T06:57:14.870Z,1538636234.870 [NAL9602] Data Fault, FailCount= 5
2018-10-04T06:57:14.870Z,1538636234.870 [NAL9602](ERROR): Data Fault
2018-10-04T06:57:14.972Z,1538636234.972 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T06:57:14.973Z,1538636234.973 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T06:57:15.244Z,1538636235.244 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0049.lzma.bak
2018-10-04T06:57:15.244Z,1538636235.244 [DataOverHttps](INFO): SBD MOMSN=8610641
2018-10-04T06:57:15.251Z,1538636235.251 [NAL9602](INFO): Powering down
2018-10-04T06:57:15.315Z,1538636235.315 [CBIT](INFO): Critical error at 20181004T065714
2018-10-04T06:57:24.390Z,1538636244.390 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20181004T041305/Express0050.lzma
2018-10-04T06:57:25.164Z,1538636245.164 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0050.lzma.bak
2018-10-04T06:57:25.164Z,1538636245.164 [DataOverHttps](INFO): SBD MOMSN=8610643
2018-10-04T06:57:26.104Z,1538636246.104 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T06:57:26.104Z,1538636246.104 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T06:57:26.104Z,1538636246.104 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T06:58:35.975Z,1538636315.975 [RDI_Pathfinder](ERROR): Failed to parse:
68,-32768,-32768,-32768,V
2018-10-04T06:59:15.715Z,1538636355.715 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T06:59:15.715Z,1538636355.715 [NAL9602] No Fault, FailCount= 5
2018-10-04T06:59:15.773Z,1538636355.773 [NAL9602](INFO): Powering up NAL9602
2018-10-04T06:59:23.787Z,1538636363.787 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:59:23.787Z,1538636363.787 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-10-04T06:59:23.787Z,1538636363.787 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T06:59:23.801Z,1538636363.801 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T06:59:23.801Z,1538636363.801 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-10-04T06:59:23.801Z,1538636363.801 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T06:59:23.829Z,1538636363.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T06:59:23.829Z,1538636363.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T06:59:24.190Z,1538636364.190 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T06:59:24.190Z,1538636364.190 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-10-04T06:59:24.191Z,1538636364.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T06:59:24.191Z,1538636364.191 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-10-04T06:59:24.595Z,1538636364.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T06:59:24.596Z,1538636364.596 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:59:24.596Z,1538636364.596 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:59:24.601Z,1538636364.601 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T06:59:24.602Z,1538636364.602 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T06:59:24.603Z,1538636364.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T06:59:26.939Z,1538636366.939 [NAL9602](INFO): NAL9602 initialized
2018-10-04T06:59:51.851Z,1538636391.851 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T07:00:30.356Z,1538636430.356 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T07:00:30.356Z,1538636430.356 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100400050, -0.1,   0.0,1448.9,  0
2018-10-04T07:02:24.741Z,1538636544.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:02:24.742Z,1538636544.742 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-10-04T07:02:24.742Z,1538636544.742 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:02:24.744Z,1538636544.744 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:02:24.744Z,1538636544.744 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-10-04T07:02:24.744Z,1538636544.744 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:02:24.769Z,1538636544.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:02:24.770Z,1538636544.770 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:02:25.111Z,1538636545.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:02:25.112Z,1538636545.112 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-10-04T07:02:25.112Z,1538636545.112 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:02:25.112Z,1538636545.112 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-10-04T07:02:25.510Z,1538636545.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:02:25.510Z,1538636545.510 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:02:25.511Z,1538636545.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:02:25.511Z,1538636545.511 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:02:25.511Z,1538636545.511 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:02:25.512Z,1538636545.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:02:26.300Z,1538636546.300 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T07:02:26.305Z,1538636546.305 [Default:CheckIn:C.Wait] Stopped
2018-10-04T07:02:26.305Z,1538636546.305 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T07:02:26.305Z,1538636546.305 [Default:CheckIn:D] Running Loop=1
2018-10-04T07:02:26.722Z,1538636546.722 [Default:CheckIn:D] Stopped
2018-10-04T07:02:26.723Z,1538636546.723 [Default:CheckIn:E] Running Loop=1
2018-10-04T07:02:27.108Z,1538636547.108 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 165.982568 min 
2018-10-04T07:02:27.109Z,1538636547.109 [Default:CheckIn:E] Stopped
2018-10-04T07:02:27.109Z,1538636547.109 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T07:02:27.109Z,1538636547.109 [Default:CheckIn] Stopped
2018-10-04T07:02:27.109Z,1538636547.109 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T07:02:27.109Z,1538636547.109 [Default:CheckIn](INFO): Running loop #17
2018-10-04T07:02:27.110Z,1538636547.110 [Default:CheckIn] Running Loop=17
2018-10-04T07:02:27.110Z,1538636547.110 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T07:02:27.110Z,1538636547.110 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T07:05:25.609Z,1538636725.609 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:05:25.609Z,1538636725.609 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-10-04T07:05:25.610Z,1538636725.610 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:05:25.611Z,1538636725.611 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:05:25.612Z,1538636725.612 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-10-04T07:05:25.612Z,1538636725.612 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:05:25.625Z,1538636725.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:05:25.626Z,1538636725.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:05:26.008Z,1538636726.008 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:05:26.008Z,1538636726.008 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-10-04T07:05:26.009Z,1538636726.009 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:05:26.009Z,1538636726.009 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-10-04T07:05:26.380Z,1538636726.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:05:26.380Z,1538636726.380 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:05:26.380Z,1538636726.380 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:05:26.381Z,1538636726.381 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:05:26.381Z,1538636726.381 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:05:26.382Z,1538636726.382 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:07:29.992Z,1538636849.992 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T07:02:27.1Z
2018-10-04T07:07:29.992Z,1538636849.992 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T07:07:29.992Z,1538636849.992 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T07:07:34.932Z,1538636854.932 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0052.lzma
2018-10-04T07:07:35.712Z,1538636855.712 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0052.lzma.bak
2018-10-04T07:07:35.713Z,1538636855.713 [DataOverHttps](INFO): SBD MOMSN=8610646
2018-10-04T07:07:45.013Z,1538636865.013 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0053.lzma
2018-10-04T07:07:45.779Z,1538636865.779 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0053.lzma.bak
2018-10-04T07:07:45.780Z,1538636865.780 [DataOverHttps](INFO): SBD MOMSN=8610649
2018-10-04T07:07:46.714Z,1538636866.714 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T07:07:46.714Z,1538636866.714 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T07:07:46.714Z,1538636866.714 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T07:08:26.651Z,1538636906.651 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:08:26.651Z,1538636906.651 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-10-04T07:08:26.651Z,1538636906.651 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:08:26.653Z,1538636906.653 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:08:26.653Z,1538636906.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-10-04T07:08:26.653Z,1538636906.653 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:08:26.667Z,1538636906.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:08:26.668Z,1538636906.668 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:08:27.039Z,1538636907.039 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:08:27.039Z,1538636907.039 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-10-04T07:08:27.039Z,1538636907.039 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:08:27.039Z,1538636907.039 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-10-04T07:08:27.418Z,1538636907.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:08:27.418Z,1538636907.418 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:08:27.419Z,1538636907.419 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:08:27.419Z,1538636907.419 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:08:27.419Z,1538636907.419 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:08:27.420Z,1538636907.420 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:09:27.907Z,1538636967.907 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T07:09:27.907Z,1538636967.907 [NAL9602] Data Fault, FailCount= 1
2018-10-04T07:09:27.907Z,1538636967.907 [NAL9602](ERROR): Data Fault
2018-10-04T07:09:27.992Z,1538636967.992 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T07:09:28.307Z,1538636968.307 [NAL9602](INFO): Powering down
2018-10-04T07:09:29.204Z,1538636969.204 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T07:09:29.204Z,1538636969.204 [NAL9602] No Fault, FailCount= 1
2018-10-04T07:09:58.395Z,1538636998.395 [NAL9602](INFO): Powering up NAL9602
2018-10-04T07:10:12.088Z,1538637012.088 [NAL9602](INFO): NAL9602 initialized
2018-10-04T07:11:27.653Z,1538637087.653 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:11:27.654Z,1538637087.654 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-10-04T07:11:27.654Z,1538637087.654 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:11:27.662Z,1538637087.662 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:11:27.662Z,1538637087.662 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-10-04T07:11:27.662Z,1538637087.662 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:11:27.719Z,1538637087.719 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:11:27.719Z,1538637087.719 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:11:28.029Z,1538637088.029 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T07:11:28.029Z,1538637088.029 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100400162329,35.0, -0.1,   0.0,14
2018-10-04T07:11:28.096Z,1538637088.096 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:11:28.096Z,1538637088.096 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-10-04T07:11:28.102Z,1538637088.102 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:11:28.102Z,1538637088.102 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-10-04T07:11:28.442Z,1538637088.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:11:28.442Z,1538637088.442 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:11:28.443Z,1538637088.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:11:28.443Z,1538637088.443 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:11:28.443Z,1538637088.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:11:28.444Z,1538637088.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:12:47.185Z,1538637167.185 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T07:12:47.193Z,1538637167.193 [Default:CheckIn:C.Wait] Stopped
2018-10-04T07:12:47.193Z,1538637167.193 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T07:12:47.193Z,1538637167.193 [Default:CheckIn:D] Running Loop=1
2018-10-04T07:12:47.589Z,1538637167.589 [Default:CheckIn:D] Stopped
2018-10-04T07:12:47.609Z,1538637167.609 [Default:CheckIn:E] Running Loop=1
2018-10-04T07:12:48.023Z,1538637168.023 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 176.330339 min 
2018-10-04T07:12:48.023Z,1538637168.023 [Default:CheckIn:E] Stopped
2018-10-04T07:12:48.023Z,1538637168.023 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T07:12:48.023Z,1538637168.023 [Default:CheckIn] Stopped
2018-10-04T07:12:48.023Z,1538637168.023 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T07:12:48.024Z,1538637168.024 [Default:CheckIn](INFO): Running loop #18
2018-10-04T07:12:48.024Z,1538637168.024 [Default:CheckIn] Running Loop=18
2018-10-04T07:12:48.024Z,1538637168.024 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T07:12:48.024Z,1538637168.024 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T07:14:28.580Z,1538637268.580 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:14:28.580Z,1538637268.580 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-10-04T07:14:28.580Z,1538637268.580 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:14:28.582Z,1538637268.582 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:14:28.582Z,1538637268.582 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-10-04T07:14:28.582Z,1538637268.582 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:14:28.596Z,1538637268.596 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:14:28.597Z,1538637268.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:14:29.010Z,1538637269.010 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:14:29.010Z,1538637269.010 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-10-04T07:14:29.011Z,1538637269.011 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:14:29.011Z,1538637269.011 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-10-04T07:14:29.377Z,1538637269.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:14:29.378Z,1538637269.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:14:29.378Z,1538637269.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:14:29.379Z,1538637269.379 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:14:29.379Z,1538637269.379 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:14:29.380Z,1538637269.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:17:29.475Z,1538637449.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:17:29.475Z,1538637449.475 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-10-04T07:17:29.475Z,1538637449.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:17:29.477Z,1538637449.477 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:17:29.477Z,1538637449.477 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-10-04T07:17:29.477Z,1538637449.477 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:17:29.504Z,1538637449.504 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:17:29.505Z,1538637449.505 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:17:29.890Z,1538637449.890 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:17:29.891Z,1538637449.891 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-10-04T07:17:29.892Z,1538637449.892 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:17:29.892Z,1538637449.892 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-10-04T07:17:30.263Z,1538637450.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:17:30.264Z,1538637450.264 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:17:30.264Z,1538637450.264 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:17:30.265Z,1538637450.265 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:17:30.269Z,1538637450.269 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:17:30.270Z,1538637450.270 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:17:49.880Z,1538637469.880 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T07:12:48.0Z
2018-10-04T07:17:49.880Z,1538637469.880 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T07:17:49.880Z,1538637469.880 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T07:17:54.840Z,1538637474.840 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0055.lzma
2018-10-04T07:17:55.616Z,1538637475.616 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0055.lzma.bak
2018-10-04T07:17:55.618Z,1538637475.618 [DataOverHttps](INFO): SBD MOMSN=8610653
2018-10-04T07:18:04.773Z,1538637484.773 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0056.lzma
2018-10-04T07:18:05.549Z,1538637485.549 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0056.lzma.bak
2018-10-04T07:18:05.550Z,1538637485.550 [DataOverHttps](INFO): SBD MOMSN=8610655
2018-10-04T07:18:06.454Z,1538637486.454 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T07:18:06.454Z,1538637486.454 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T07:18:06.454Z,1538637486.454 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T07:20:12.927Z,1538637612.927 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T07:20:12.927Z,1538637612.927 [NAL9602] Data Fault, FailCount= 2
2018-10-04T07:20:12.927Z,1538637612.927 [NAL9602](ERROR): Data Fault
2018-10-04T07:20:13.023Z,1538637613.023 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T07:20:13.327Z,1538637613.327 [NAL9602](INFO): Powering down
2018-10-04T07:20:14.175Z,1538637614.175 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T07:20:14.176Z,1538637614.175 [NAL9602] No Fault, FailCount= 2
2018-10-04T07:20:31.365Z,1538637631.365 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:20:31.365Z,1538637631.365 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-10-04T07:20:31.366Z,1538637631.366 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:20:31.367Z,1538637631.367 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:20:31.368Z,1538637631.368 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-10-04T07:20:31.368Z,1538637631.368 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:20:31.393Z,1538637631.393 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:20:31.394Z,1538637631.394 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:20:31.500Z,1538637631.500 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:20:31.500Z,1538637631.500 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-10-04T07:20:31.500Z,1538637631.500 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:20:31.500Z,1538637631.500 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-10-04T07:20:31.864Z,1538637631.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:20:31.869Z,1538637631.869 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:20:31.870Z,1538637631.870 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:20:31.870Z,1538637631.870 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:20:31.871Z,1538637631.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:20:31.871Z,1538637631.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:20:43.411Z,1538637643.411 [NAL9602](INFO): Powering up NAL9602
2018-10-04T07:20:54.611Z,1538637654.611 [NAL9602](INFO): NAL9602 initialized
2018-10-04T07:22:53.866Z,1538637773.866 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T07:23:06.677Z,1538637786.677 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T07:23:06.677Z,1538637786.677 [Default:CheckIn:C.Wait] Stopped
2018-10-04T07:23:06.677Z,1538637786.677 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T07:23:06.678Z,1538637786.678 [Default:CheckIn:D] Running Loop=1
2018-10-04T07:23:07.069Z,1538637787.069 [Default:CheckIn:D] Stopped
2018-10-04T07:23:07.069Z,1538637787.069 [Default:CheckIn:E] Running Loop=1
2018-10-04T07:23:07.473Z,1538637787.473 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 186.655013 min 
2018-10-04T07:23:07.473Z,1538637787.473 [Default:CheckIn:E] Stopped
2018-10-04T07:23:07.473Z,1538637787.473 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T07:23:07.473Z,1538637787.473 [Default:CheckIn] Stopped
2018-10-04T07:23:07.473Z,1538637787.473 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T07:23:07.474Z,1538637787.474 [Default:CheckIn](INFO): Running loop #19
2018-10-04T07:23:07.474Z,1538637787.474 [Default:CheckIn] Running Loop=19
2018-10-04T07:23:07.474Z,1538637787.474 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T07:23:07.474Z,1538637787.474 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T07:23:31.963Z,1538637811.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:23:31.963Z,1538637811.963 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-10-04T07:23:31.963Z,1538637811.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:23:31.969Z,1538637811.969 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:23:31.970Z,1538637811.970 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-10-04T07:23:31.970Z,1538637811.970 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:23:31.995Z,1538637811.995 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:23:31.995Z,1538637811.995 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:23:32.371Z,1538637812.371 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:23:32.371Z,1538637812.371 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-10-04T07:23:32.372Z,1538637812.372 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:23:32.372Z,1538637812.372 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-10-04T07:23:32.768Z,1538637812.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:23:32.768Z,1538637812.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:23:32.773Z,1538637812.773 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:23:32.773Z,1538637812.773 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:23:32.774Z,1538637812.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:23:32.774Z,1538637812.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:23:44.767Z,1538637824.767 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100400284029,35.0, -0.1,   0.0,1448.9,  0
2018-10-04T07:26:32.823Z,1538637992.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:26:32.823Z,1538637992.823 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-10-04T07:26:32.823Z,1538637992.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:26:32.829Z,1538637992.829 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:26:32.829Z,1538637992.829 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-10-04T07:26:32.829Z,1538637992.829 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:26:32.855Z,1538637992.855 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:26:32.855Z,1538637992.855 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:26:33.226Z,1538637993.226 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:26:33.226Z,1538637993.226 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-10-04T07:26:33.227Z,1538637993.227 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:26:33.227Z,1538637993.227 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-10-04T07:26:33.640Z,1538637993.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:26:33.641Z,1538637993.641 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:26:33.641Z,1538637993.641 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:26:33.642Z,1538637993.642 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:26:33.642Z,1538637993.642 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:26:33.643Z,1538637993.643 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:28:10.203Z,1538638090.203 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T07:23:07.5Z
2018-10-04T07:28:10.203Z,1538638090.203 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T07:28:10.204Z,1538638090.204 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T07:28:15.133Z,1538638095.133 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0058.lzma
2018-10-04T07:28:15.908Z,1538638095.908 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0058.lzma.bak
2018-10-04T07:28:15.908Z,1538638095.908 [DataOverHttps](INFO): SBD MOMSN=8610659
2018-10-04T07:28:25.091Z,1538638105.091 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0059.lzma
2018-10-04T07:28:25.848Z,1538638105.848 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0059.lzma.bak
2018-10-04T07:28:25.848Z,1538638105.848 [DataOverHttps](INFO): SBD MOMSN=8610661
2018-10-04T07:28:26.793Z,1538638106.793 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T07:28:26.793Z,1538638106.793 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T07:28:26.793Z,1538638106.793 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T07:29:33.931Z,1538638173.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:29:33.931Z,1538638173.931 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-10-04T07:29:33.931Z,1538638173.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:29:33.933Z,1538638173.933 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:29:33.933Z,1538638173.933 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-10-04T07:29:33.934Z,1538638173.934 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:29:33.954Z,1538638173.954 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:29:33.954Z,1538638173.954 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:29:34.319Z,1538638174.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:29:34.319Z,1538638174.319 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-10-04T07:29:34.320Z,1538638174.320 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:29:34.320Z,1538638174.320 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-10-04T07:29:34.749Z,1538638174.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:29:34.750Z,1538638174.750 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:29:34.750Z,1538638174.750 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:29:34.751Z,1538638174.751 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:29:34.751Z,1538638174.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:29:34.752Z,1538638174.752 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:30:55.751Z,1538638255.751 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T07:30:55.751Z,1538638255.751 [NAL9602] Data Fault, FailCount= 3
2018-10-04T07:30:55.751Z,1538638255.751 [NAL9602](ERROR): Data Fault
2018-10-04T07:30:55.836Z,1538638255.836 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T07:30:56.155Z,1538638256.155 [NAL9602](INFO): Powering down
2018-10-04T07:30:56.000Z,1538638257.000 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T07:30:56.000Z,1538638257.000 [NAL9602] No Fault, FailCount= 3
2018-10-04T07:31:27.451Z,1538638287.451 [NAL9602](INFO): Powering up NAL9602
2018-10-04T07:31:38.455Z,1538638298.455 [NAL9602](INFO): NAL9602 initialized
2018-10-04T07:32:36.996Z,1538638356.996 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:32:36.997Z,1538638356.997 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-10-04T07:32:36.997Z,1538638356.997 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:32:36.999Z,1538638356.999 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:32:36.999Z,1538638356.999 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-10-04T07:32:36.999Z,1538638356.999 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:32:37.012Z,1538638357.012 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:32:37.012Z,1538638357.012 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:32:37.124Z,1538638357.124 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:32:37.124Z,1538638357.124 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-10-04T07:32:37.124Z,1538638357.124 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:32:37.124Z,1538638357.124 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-10-04T07:32:37.488Z,1538638357.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:32:37.488Z,1538638357.488 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:32:37.488Z,1538638357.488 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:32:37.489Z,1538638357.489 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:32:37.490Z,1538638357.490 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:32:37.490Z,1538638357.490 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:33:27.168Z,1538638407.168 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T07:33:27.168Z,1538638407.168 [Default:CheckIn:C.Wait] Stopped
2018-10-04T07:33:27.168Z,1538638407.168 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T07:33:27.168Z,1538638407.168 [Default:CheckIn:D] Running Loop=1
2018-10-04T07:33:27.561Z,1538638407.561 [Default:CheckIn:D] Stopped
2018-10-04T07:33:27.561Z,1538638407.561 [Default:CheckIn:E] Running Loop=1
2018-10-04T07:33:27.974Z,1538638407.974 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 196.996484 min 
2018-10-04T07:33:27.974Z,1538638407.974 [Default:CheckIn:E] Stopped
2018-10-04T07:33:27.974Z,1538638407.974 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T07:33:27.974Z,1538638407.974 [Default:CheckIn] Stopped
2018-10-04T07:33:27.975Z,1538638407.975 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T07:33:27.975Z,1538638407.975 [Default:CheckIn](INFO): Running loop #20
2018-10-04T07:33:27.975Z,1538638407.975 [Default:CheckIn] Running Loop=20
2018-10-04T07:33:27.975Z,1538638407.975 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T07:33:27.975Z,1538638407.975 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T07:34:31.313Z,1538638471.313 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-04T07:34:31.314Z,1538638471.314 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00 +0.00,        +0.00,   0.00,12052.56
2018-10-04T07:35:37.491Z,1538638537.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:35:37.491Z,1538638537.491 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-10-04T07:35:37.491Z,1538638537.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:35:37.509Z,1538638537.509 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:35:37.509Z,1538638537.509 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-10-04T07:35:37.509Z,1538638537.509 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:35:37.535Z,1538638537.535 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:35:37.535Z,1538638537.535 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:35:37.950Z,1538638537.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:35:37.950Z,1538638537.950 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-10-04T07:35:37.951Z,1538638537.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:35:37.951Z,1538638537.951 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-10-04T07:35:38.298Z,1538638538.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:35:38.299Z,1538638538.299 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:35:38.299Z,1538638538.299 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:35:38.299Z,1538638538.299 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:35:38.300Z,1538638538.300 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:35:38.300Z,1538638538.300 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:36:10.145Z,1538638570.145 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T07:38:29.340Z,1538638709.340 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T07:33:27.0Z
2018-10-04T07:38:29.340Z,1538638709.340 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T07:38:29.340Z,1538638709.340 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T07:38:34.266Z,1538638714.266 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0061.lzma
2018-10-04T07:38:35.040Z,1538638715.040 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0061.lzma.bak
2018-10-04T07:38:35.040Z,1538638715.040 [DataOverHttps](INFO): SBD MOMSN=8610665
2018-10-04T07:38:39.314Z,1538638719.314 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:38:39.314Z,1538638719.314 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-10-04T07:38:39.315Z,1538638719.315 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:38:39.316Z,1538638719.316 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:38:39.316Z,1538638719.316 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-10-04T07:38:39.317Z,1538638719.317 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:38:39.330Z,1538638719.330 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:38:39.330Z,1538638719.330 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:38:39.467Z,1538638719.467 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:38:39.467Z,1538638719.467 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-10-04T07:38:39.467Z,1538638719.467 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:38:39.467Z,1538638719.467 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-10-04T07:38:39.798Z,1538638719.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:38:39.798Z,1538638719.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:38:39.798Z,1538638719.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:38:39.799Z,1538638719.799 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:38:39.799Z,1538638719.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:38:39.800Z,1538638719.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:38:44.367Z,1538638724.367 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0062.lzma
2018-10-04T07:38:45.164Z,1538638725.164 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0062.lzma.bak
2018-10-04T07:38:45.164Z,1538638725.164 [DataOverHttps](INFO): SBD MOMSN=8610667
2018-10-04T07:38:46.091Z,1538638726.091 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T07:38:46.091Z,1538638726.091 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T07:38:46.091Z,1538638726.091 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T07:40:01.174Z,1538638801.174 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T07:41:39.857Z,1538638899.857 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:41:39.857Z,1538638899.857 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-10-04T07:41:39.857Z,1538638899.857 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:41:39.859Z,1538638899.859 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:41:39.859Z,1538638899.859 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-10-04T07:41:39.859Z,1538638899.859 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:41:39.908Z,1538638899.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:41:39.909Z,1538638899.909 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:41:40.290Z,1538638900.290 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:41:40.290Z,1538638900.290 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-10-04T07:41:40.291Z,1538638900.291 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:41:40.291Z,1538638900.291 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-10-04T07:41:40.611Z,1538638900.611 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T07:41:40.611Z,1538638900.611 [NAL9602] Data Fault, FailCount= 4
2018-10-04T07:41:40.611Z,1538638900.611 [NAL9602](ERROR): Data Fault
2018-10-04T07:41:40.664Z,1538638900.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:41:40.664Z,1538638900.664 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:41:40.673Z,1538638900.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:41:40.673Z,1538638900.673 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:41:40.674Z,1538638900.674 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:41:40.674Z,1538638900.674 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:41:40.691Z,1538638900.691 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T07:41:41.007Z,1538638901.007 [NAL9602](INFO): Powering down
2018-10-04T07:41:41.986Z,1538638901.986 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T07:41:41.986Z,1538638901.986 [NAL9602] No Fault, FailCount= 4
2018-10-04T07:41:57.937Z,1538638917.937 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T07:42:11.115Z,1538638931.115 [NAL9602](INFO): Powering up NAL9602
2018-10-04T07:42:13.947Z,1538638933.947 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T07:42:13.947Z,1538638933.947 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-3768,V
2018-10-04T07:42:21.979Z,1538638941.979 [NAL9602](INFO): NAL9602 initialized
2018-10-04T07:43:46.600Z,1538639026.600 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T07:43:46.600Z,1538639026.600 [Default:CheckIn:C.Wait] Stopped
2018-10-04T07:43:46.600Z,1538639026.600 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T07:43:46.600Z,1538639026.600 [Default:CheckIn:D] Running Loop=1
2018-10-04T07:43:46.989Z,1538639026.989 [Default:CheckIn:D] Stopped
2018-10-04T07:43:46.989Z,1538639026.989 [Default:CheckIn:E] Running Loop=1
2018-10-04T07:43:47.357Z,1538639027.357 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 207.320345 min 
2018-10-04T07:43:47.357Z,1538639027.357 [Default:CheckIn:E] Stopped
2018-10-04T07:43:47.357Z,1538639027.357 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T07:43:47.358Z,1538639027.358 [Default:CheckIn] Stopped
2018-10-04T07:43:47.358Z,1538639027.358 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T07:43:47.358Z,1538639027.358 [Default:CheckIn](INFO): Running loop #21
2018-10-04T07:43:47.358Z,1538639027.358 [Default:CheckIn] Running Loop=21
2018-10-04T07:43:47.358Z,1538639027.358 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T07:43:47.358Z,1538639027.358 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T07:44:42.241Z,1538639082.241 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:44:42.241Z,1538639082.241 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-10-04T07:44:42.241Z,1538639082.241 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:44:42.243Z,1538639082.243 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:44:42.243Z,1538639082.243 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-10-04T07:44:42.243Z,1538639082.243 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:44:42.257Z,1538639082.257 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:44:42.257Z,1538639082.257 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:44:42.395Z,1538639082.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:44:42.395Z,1538639082.395 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-10-04T07:44:42.395Z,1538639082.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:44:42.395Z,1538639082.395 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-10-04T07:44:42.734Z,1538639082.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:44:42.734Z,1538639082.734 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:44:42.735Z,1538639082.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:44:42.735Z,1538639082.735 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:44:42.735Z,1538639082.735 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:44:42.736Z,1538639082.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:47:42.912Z,1538639262.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:47:42.912Z,1538639262.912 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-10-04T07:47:42.912Z,1538639262.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:47:42.918Z,1538639262.918 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:47:42.918Z,1538639262.918 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-10-04T07:47:42.918Z,1538639262.918 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:47:42.944Z,1538639262.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:47:42.944Z,1538639262.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:47:43.314Z,1538639263.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:47:43.314Z,1538639263.314 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-10-04T07:47:43.315Z,1538639263.315 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:47:43.315Z,1538639263.315 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-10-04T07:47:43.703Z,1538639263.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:47:43.704Z,1538639263.704 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:47:43.704Z,1538639263.704 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:47:43.705Z,1538639263.705 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:47:43.713Z,1538639263.713 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:47:43.714Z,1538639263.714 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:48:49.019Z,1538639329.019 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T07:43:47.4Z
2018-10-04T07:48:49.019Z,1538639329.019 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T07:48:49.019Z,1538639329.019 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T07:48:53.941Z,1538639333.941 [DataOverHttps](INFO): Sending 44 bytes from file Logs/20181004T041305/Courier0064.lzma
2018-10-04T07:48:54.750Z,1538639334.750 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0064.lzma.bak
2018-10-04T07:48:54.750Z,1538639334.750 [DataOverHttps](INFO): SBD MOMSN=8610671
2018-10-04T07:49:03.913Z,1538639343.913 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0065.lzma
2018-10-04T07:49:04.700Z,1538639344.700 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0065.lzma.bak
2018-10-04T07:49:04.700Z,1538639344.700 [DataOverHttps](INFO): SBD MOMSN=8610673
2018-10-04T07:49:05.691Z,1538639345.691 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T07:49:05.691Z,1538639345.691 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T07:49:05.691Z,1538639345.691 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T07:49:57.998Z,1538639397.998 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T07:49:57.998Z,1538639397.998 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-3276,-32768,V
2018-10-04T07:50:44.067Z,1538639444.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:50:44.067Z,1538639444.067 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-10-04T07:50:44.067Z,1538639444.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:50:44.073Z,1538639444.073 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:50:44.073Z,1538639444.073 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-10-04T07:50:44.073Z,1538639444.073 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:50:44.105Z,1538639444.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:50:44.109Z,1538639444.109 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:50:44.498Z,1538639444.498 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:50:44.498Z,1538639444.498 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-10-04T07:50:44.499Z,1538639444.499 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:50:44.499Z,1538639444.499 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-10-04T07:50:44.874Z,1538639444.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:50:44.874Z,1538639444.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:50:44.874Z,1538639444.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:50:44.875Z,1538639444.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:50:44.875Z,1538639444.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:50:44.876Z,1538639444.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:51:49.100Z,1538639509.100 [RDI_Pathfinder](ERROR): only read 2 of 5 data items
2018-10-04T07:51:49.101Z,1538639509.101 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768-32768,V
2018-10-04T07:52:24.551Z,1538639544.551 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T07:52:24.551Z,1538639544.551 [NAL9602] Data Fault, FailCount= 5
2018-10-04T07:52:24.551Z,1538639544.551 [NAL9602](ERROR): Data Fault
2018-10-04T07:52:24.656Z,1538639544.656 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T07:52:24.661Z,1538639544.661 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T07:52:24.951Z,1538639544.951 [NAL9602](INFO): Powering down
2018-10-04T07:52:25.015Z,1538639545.015 [CBIT](INFO): Critical error at 20181004T075224
2018-10-04T07:53:45.235Z,1538639625.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:53:45.235Z,1538639625.235 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-10-04T07:53:45.235Z,1538639625.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:53:45.241Z,1538639625.241 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:53:45.241Z,1538639625.241 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-10-04T07:53:45.241Z,1538639625.241 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:53:45.263Z,1538639625.263 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:53:45.263Z,1538639625.263 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:53:45.668Z,1538639625.668 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:53:45.669Z,1538639625.669 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-10-04T07:53:45.669Z,1538639625.669 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:53:45.669Z,1538639625.669 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-10-04T07:53:46.013Z,1538639626.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:53:46.014Z,1538639626.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:53:46.014Z,1538639626.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:53:46.014Z,1538639626.014 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:53:46.015Z,1538639626.015 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:53:46.015Z,1538639626.015 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:54:06.116Z,1538639646.116 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T07:54:06.116Z,1538639646.116 [Default:CheckIn:C.Wait] Stopped
2018-10-04T07:54:06.116Z,1538639646.116 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T07:54:06.117Z,1538639646.117 [Default:CheckIn:D] Running Loop=1
2018-10-04T07:54:06.543Z,1538639646.543 [Default:CheckIn:D] Stopped
2018-10-04T07:54:06.543Z,1538639646.543 [Default:CheckIn:E] Running Loop=1
2018-10-04T07:54:06.947Z,1538639646.947 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 217.646240 min 
2018-10-04T07:54:06.947Z,1538639646.947 [Default:CheckIn:E] Stopped
2018-10-04T07:54:06.947Z,1538639646.947 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T07:54:06.947Z,1538639646.947 [Default:CheckIn] Stopped
2018-10-04T07:54:06.947Z,1538639646.947 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T07:54:06.948Z,1538639646.948 [Default:CheckIn](INFO): Running loop #22
2018-10-04T07:54:06.948Z,1538639646.948 [Default:CheckIn] Running Loop=22
2018-10-04T07:54:06.948Z,1538639646.948 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T07:54:06.948Z,1538639646.948 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T07:54:26.953Z,1538639666.953 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T07:54:26.953Z,1538639666.953 [NAL9602] No Fault, FailCount= 5
2018-10-04T07:54:27.001Z,1538639667.001 [NAL9602](INFO): Powering up NAL9602
2018-10-04T07:54:38.175Z,1538639678.175 [NAL9602](INFO): NAL9602 initialized
2018-10-04T07:56:48.091Z,1538639808.091 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:56:48.091Z,1538639808.091 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-10-04T07:56:48.092Z,1538639808.092 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:56:48.094Z,1538639808.094 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:56:48.094Z,1538639808.094 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-10-04T07:56:48.094Z,1538639808.094 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:56:48.107Z,1538639808.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:56:48.107Z,1538639808.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:56:48.187Z,1538639808.187 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:56:48.187Z,1538639808.187 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-10-04T07:56:48.187Z,1538639808.187 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:56:48.187Z,1538639808.187 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-10-04T07:56:48.574Z,1538639808.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:56:48.574Z,1538639808.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:56:48.575Z,1538639808.575 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:56:48.575Z,1538639808.575 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:56:48.576Z,1538639808.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:56:48.576Z,1538639808.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:59:09.364Z,1538639949.364 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T07:54:06.9Z
2018-10-04T07:59:09.364Z,1538639949.364 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T07:59:09.364Z,1538639949.364 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T07:59:14.325Z,1538639954.325 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0067.lzma
2018-10-04T07:59:15.084Z,1538639955.084 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0067.lzma.bak
2018-10-04T07:59:15.084Z,1538639955.084 [DataOverHttps](INFO): SBD MOMSN=8610677
2018-10-04T07:59:24.298Z,1538639964.298 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0068.lzma
2018-10-04T07:59:25.068Z,1538639965.068 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0068.lzma.bak
2018-10-04T07:59:25.068Z,1538639965.068 [DataOverHttps](INFO): SBD MOMSN=8610680
2018-10-04T07:59:26.016Z,1538639966.016 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T07:59:26.016Z,1538639966.016 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T07:59:26.016Z,1538639966.016 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T07:59:48.635Z,1538639988.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:59:48.635Z,1538639988.635 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-10-04T07:59:48.635Z,1538639988.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T07:59:48.642Z,1538639988.642 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T07:59:48.642Z,1538639988.642 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-10-04T07:59:48.642Z,1538639988.642 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T07:59:48.676Z,1538639988.676 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T07:59:48.676Z,1538639988.676 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T07:59:49.072Z,1538639989.072 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T07:59:49.072Z,1538639989.072 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-10-04T07:59:49.077Z,1538639989.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T07:59:49.077Z,1538639989.077 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-10-04T07:59:49.446Z,1538639989.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T07:59:49.447Z,1538639989.447 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:59:49.447Z,1538639989.447 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T07:59:49.448Z,1538639989.448 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T07:59:49.448Z,1538639989.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T07:59:49.448Z,1538639989.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:02:49.739Z,1538640169.739 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:02:49.740Z,1538640169.740 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-10-04T08:02:49.740Z,1538640169.740 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:02:49.746Z,1538640169.746 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:02:49.746Z,1538640169.746 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-10-04T08:02:49.746Z,1538640169.746 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:02:49.772Z,1538640169.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:02:49.772Z,1538640169.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:02:50.159Z,1538640170.159 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:02:50.159Z,1538640170.159 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-10-04T08:02:50.160Z,1538640170.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:02:50.160Z,1538640170.160 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-10-04T08:02:50.514Z,1538640170.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:02:50.515Z,1538640170.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:02:50.515Z,1538640170.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:02:50.516Z,1538640170.516 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:02:50.516Z,1538640170.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:02:50.516Z,1538640170.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:04:12.788Z,1538640252.788 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T08:04:26.404Z,1538640266.404 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T08:04:26.405Z,1538640266.405 [Default:CheckIn:C.Wait] Stopped
2018-10-04T08:04:26.405Z,1538640266.405 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T08:04:26.406Z,1538640266.406 [Default:CheckIn:D] Running Loop=1
2018-10-04T08:04:26.819Z,1538640266.819 [Default:CheckIn:D] Stopped
2018-10-04T08:04:26.819Z,1538640266.819 [Default:CheckIn:E] Running Loop=1
2018-10-04T08:04:27.213Z,1538640267.213 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 227.984180 min 
2018-10-04T08:04:27.213Z,1538640267.213 [Default:CheckIn:E] Stopped
2018-10-04T08:04:27.214Z,1538640267.214 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T08:04:27.214Z,1538640267.214 [Default:CheckIn] Stopped
2018-10-04T08:04:27.214Z,1538640267.214 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T08:04:27.214Z,1538640267.214 [Default:CheckIn](INFO): Running loop #23
2018-10-04T08:04:27.214Z,1538640267.214 [Default:CheckIn] Running Loop=23
2018-10-04T08:04:27.214Z,1538640267.214 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T08:04:27.214Z,1538640267.214 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T08:04:39.959Z,1538640279.959 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T08:04:39.959Z,1538640279.959 [NAL9602] Data Fault, FailCount= 1
2018-10-04T08:04:39.959Z,1538640279.959 [NAL9602](ERROR): Data Fault
2018-10-04T08:04:40.053Z,1538640280.053 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T08:04:40.380Z,1538640280.380 [NAL9602](INFO): Powering down
2018-10-04T08:04:41.244Z,1538640281.244 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T08:04:41.244Z,1538640281.244 [NAL9602] No Fault, FailCount= 1
2018-10-04T08:05:10.463Z,1538640310.463 [NAL9602](INFO): Powering up NAL9602
2018-10-04T08:05:22.531Z,1538640322.531 [NAL9602](INFO): NAL9602 initialized
2018-10-04T08:05:50.574Z,1538640350.574 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:05:50.574Z,1538640350.574 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2018-10-04T08:05:50.575Z,1538640350.575 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:05:50.576Z,1538640350.576 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:05:50.576Z,1538640350.576 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2018-10-04T08:05:50.577Z,1538640350.577 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:05:50.602Z,1538640350.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:05:50.602Z,1538640350.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:05:50.988Z,1538640350.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:05:50.988Z,1538640350.988 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2018-10-04T08:05:50.989Z,1538640350.989 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:05:50.989Z,1538640350.989 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2018-10-04T08:05:51.378Z,1538640351.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:05:51.378Z,1538640351.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:05:51.378Z,1538640351.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:05:51.379Z,1538640351.379 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:05:51.379Z,1538640351.379 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:05:51.380Z,1538640351.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:08:53.883Z,1538640533.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:08:53.883Z,1538640533.883 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2018-10-04T08:08:53.884Z,1538640533.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:08:53.886Z,1538640533.886 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:08:53.886Z,1538640533.886 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2018-10-04T08:08:53.886Z,1538640533.886 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:08:53.932Z,1538640533.932 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:08:53.932Z,1538640533.932 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:08:54.039Z,1538640534.039 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:08:54.039Z,1538640534.039 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2018-10-04T08:08:54.040Z,1538640534.040 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:08:54.040Z,1538640534.040 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2018-10-04T08:08:54.423Z,1538640534.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:08:54.424Z,1538640534.424 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:08:54.424Z,1538640534.424 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:08:54.424Z,1538640534.424 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:08:54.425Z,1538640534.425 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:08:54.425Z,1538640534.425 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:09:29.215Z,1538640569.215 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T08:04:27.2Z
2018-10-04T08:09:29.215Z,1538640569.215 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T08:09:29.215Z,1538640569.215 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T08:09:34.193Z,1538640574.193 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0070.lzma
2018-10-04T08:09:34.964Z,1538640574.964 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0070.lzma.bak
2018-10-04T08:09:34.964Z,1538640574.964 [DataOverHttps](INFO): SBD MOMSN=8610684
2018-10-04T08:09:44.176Z,1538640584.176 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0071.lzma
2018-10-04T08:09:44.944Z,1538640584.944 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0071.lzma.bak
2018-10-04T08:09:44.944Z,1538640584.944 [DataOverHttps](INFO): SBD MOMSN=8610686
2018-10-04T08:09:45.892Z,1538640585.892 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T08:09:45.892Z,1538640585.892 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T08:09:45.893Z,1538640585.893 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T08:11:21.087Z,1538640681.087 [RDI_Pathfinder](ERROR): Failed to parse:
:e*15.880,*-0.004,*0.000
2018-10-04T08:11:51.913Z,1538640711.913 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T08:11:51.914Z,1538640711.914 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-3276,-32768,-32768,V
2018-10-04T08:11:54.737Z,1538640714.737 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:11:54.737Z,1538640714.737 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2018-10-04T08:11:54.737Z,1538640714.737 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:11:54.739Z,1538640714.739 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:11:54.739Z,1538640714.739 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2018-10-04T08:11:54.739Z,1538640714.739 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:11:54.780Z,1538640714.780 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:11:54.780Z,1538640714.780 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:11:55.130Z,1538640715.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:11:55.131Z,1538640715.131 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2018-10-04T08:11:55.131Z,1538640715.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:11:55.131Z,1538640715.131 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2018-10-04T08:11:55.653Z,1538640715.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:11:55.653Z,1538640715.653 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:11:55.654Z,1538640715.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:11:55.654Z,1538640715.654 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:11:55.655Z,1538640715.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:11:55.655Z,1538640715.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:14:46.400Z,1538640886.400 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T08:14:46.401Z,1538640886.401 [Default:CheckIn:C.Wait] Stopped
2018-10-04T08:14:46.401Z,1538640886.401 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T08:14:46.401Z,1538640886.401 [Default:CheckIn:D] Running Loop=1
2018-10-04T08:14:46.805Z,1538640886.805 [Default:CheckIn:D] Stopped
2018-10-04T08:14:46.805Z,1538640886.805 [Default:CheckIn:E] Running Loop=1
2018-10-04T08:14:47.178Z,1538640887.178 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 238.317285 min 
2018-10-04T08:14:47.178Z,1538640887.178 [Default:CheckIn:E] Stopped
2018-10-04T08:14:47.178Z,1538640887.178 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T08:14:47.178Z,1538640887.178 [Default:CheckIn] Stopped
2018-10-04T08:14:47.178Z,1538640887.178 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T08:14:47.179Z,1538640887.179 [Default:CheckIn](INFO): Running loop #24
2018-10-04T08:14:47.179Z,1538640887.179 [Default:CheckIn] Running Loop=24
2018-10-04T08:14:47.179Z,1538640887.179 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T08:14:47.179Z,1538640887.179 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T08:14:55.990Z,1538640895.990 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:14:55.990Z,1538640895.990 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2018-10-04T08:14:55.990Z,1538640895.990 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:14:55.992Z,1538640895.992 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:14:55.992Z,1538640895.992 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2018-10-04T08:14:55.992Z,1538640895.992 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:14:56.005Z,1538640896.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:14:56.005Z,1538640896.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:14:56.414Z,1538640896.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:14:56.414Z,1538640896.414 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2018-10-04T08:14:56.415Z,1538640896.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:14:56.415Z,1538640896.415 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2018-10-04T08:14:56.797Z,1538640896.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:14:56.798Z,1538640896.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:14:56.798Z,1538640896.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:14:56.799Z,1538640896.799 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:14:56.799Z,1538640896.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:14:56.799Z,1538640896.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:15:23.619Z,1538640923.619 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T08:15:23.619Z,1538640923.619 [NAL9602] Data Fault, FailCount= 2
2018-10-04T08:15:23.619Z,1538640923.619 [NAL9602](ERROR): Data Fault
2018-10-04T08:15:23.701Z,1538640923.701 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T08:15:24.023Z,1538640924.023 [NAL9602](INFO): Powering down
2018-10-04T08:15:24.897Z,1538640924.897 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T08:15:24.897Z,1538640924.897 [NAL9602] No Fault, FailCount= 2
2018-10-04T08:15:54.083Z,1538640954.083 [NAL9602](INFO): Powering up NAL9602
2018-10-04T08:16:05.279Z,1538640965.279 [NAL9602](INFO): NAL9602 initialized
2018-10-04T08:17:56.984Z,1538641076.984 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:17:56.984Z,1538641076.984 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2018-10-04T08:17:56.984Z,1538641076.984 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:17:56.986Z,1538641076.986 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:17:56.986Z,1538641076.986 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2018-10-04T08:17:56.986Z,1538641076.986 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:17:57.025Z,1538641077.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:17:57.025Z,1538641077.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:17:57.403Z,1538641077.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:17:57.403Z,1538641077.403 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2018-10-04T08:17:57.404Z,1538641077.404 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:17:57.404Z,1538641077.404 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2018-10-04T08:17:57.792Z,1538641077.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:17:57.793Z,1538641077.793 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:17:57.793Z,1538641077.793 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:17:57.794Z,1538641077.794 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:17:57.794Z,1538641077.794 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:17:57.794Z,1538641077.794 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:19:48.923Z,1538641188.923 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T08:14:47.2Z
2018-10-04T08:19:48.923Z,1538641188.923 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T08:19:48.923Z,1538641188.923 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T08:19:53.896Z,1538641193.896 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0073.lzma
2018-10-04T08:19:54.678Z,1538641194.678 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0073.lzma.bak
2018-10-04T08:19:54.678Z,1538641194.678 [DataOverHttps](INFO): SBD MOMSN=8610690
2018-10-04T08:20:03.904Z,1538641203.904 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0074.lzma
2018-10-04T08:20:04.664Z,1538641204.664 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0074.lzma.bak
2018-10-04T08:20:04.664Z,1538641204.664 [DataOverHttps](INFO): SBD MOMSN=8610692
2018-10-04T08:20:05.614Z,1538641205.614 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T08:20:05.614Z,1538641205.614 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T08:20:05.614Z,1538641205.614 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T08:20:57.893Z,1538641257.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:20:57.893Z,1538641257.893 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2018-10-04T08:20:57.893Z,1538641257.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:20:57.895Z,1538641257.895 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:20:57.895Z,1538641257.895 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2018-10-04T08:20:57.895Z,1538641257.895 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:20:57.920Z,1538641257.920 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:20:57.921Z,1538641257.921 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:20:58.315Z,1538641258.315 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:20:58.315Z,1538641258.315 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2018-10-04T08:20:58.315Z,1538641258.315 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:20:58.315Z,1538641258.315 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2018-10-04T08:20:58.746Z,1538641258.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:20:58.746Z,1538641258.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:20:58.746Z,1538641258.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:20:58.747Z,1538641258.747 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:20:58.747Z,1538641258.747 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:20:58.748Z,1538641258.748 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:21:11.887Z,1538641271.887 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T08:21:11.888Z,1538641271.888 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,181004012607 -0.1,   0.0,1448.9,  0
2018-10-04T08:23:58.959Z,1538641438.959 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:23:58.959Z,1538641438.959 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2018-10-04T08:23:58.959Z,1538641438.959 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:23:58.965Z,1538641438.965 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:23:58.965Z,1538641438.965 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2018-10-04T08:23:58.965Z,1538641438.965 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:23:58.991Z,1538641438.991 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:23:58.991Z,1538641438.991 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:23:59.341Z,1538641439.341 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:23:59.342Z,1538641439.342 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2018-10-04T08:23:59.342Z,1538641439.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:23:59.342Z,1538641439.342 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2018-10-04T08:23:59.730Z,1538641439.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:23:59.730Z,1538641439.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:23:59.730Z,1538641439.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:23:59.731Z,1538641439.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:23:59.731Z,1538641439.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:23:59.732Z,1538641439.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:25:05.928Z,1538641505.928 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T08:25:05.929Z,1538641505.929 [Default:CheckIn:C.Wait] Stopped
2018-10-04T08:25:05.930Z,1538641505.930 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T08:25:05.930Z,1538641505.930 [Default:CheckIn:D] Running Loop=1
2018-10-04T08:25:06.317Z,1538641506.317 [Default:CheckIn:D] Stopped
2018-10-04T08:25:06.317Z,1538641506.317 [Default:CheckIn:E] Running Loop=1
2018-10-04T08:25:06.742Z,1538641506.742 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 248.642415 min 
2018-10-04T08:25:06.743Z,1538641506.743 [Default:CheckIn:E] Stopped
2018-10-04T08:25:06.743Z,1538641506.743 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T08:25:06.743Z,1538641506.743 [Default:CheckIn] Stopped
2018-10-04T08:25:06.743Z,1538641506.743 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T08:25:06.743Z,1538641506.743 [Default:CheckIn](INFO): Running loop #25
2018-10-04T08:25:06.743Z,1538641506.743 [Default:CheckIn] Running Loop=25
2018-10-04T08:25:06.743Z,1538641506.743 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T08:25:06.743Z,1538641506.743 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T08:26:08.051Z,1538641568.051 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T08:26:08.051Z,1538641568.051 [NAL9602] Data Fault, FailCount= 3
2018-10-04T08:26:08.051Z,1538641568.051 [NAL9602](ERROR): Data Fault
2018-10-04T08:26:08.109Z,1538641568.109 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T08:26:08.455Z,1538641568.455 [NAL9602](INFO): Powering down
2018-10-04T08:26:09.307Z,1538641569.307 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T08:26:09.307Z,1538641569.307 [NAL9602] No Fault, FailCount= 3
2018-10-04T08:26:38.535Z,1538641598.535 [NAL9602](INFO): Powering up NAL9602
2018-10-04T08:26:49.735Z,1538641609.735 [NAL9602](INFO): NAL9602 initialized
2018-10-04T08:26:59.798Z,1538641619.798 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:26:59.798Z,1538641619.798 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2018-10-04T08:26:59.798Z,1538641619.798 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:26:59.802Z,1538641619.802 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:26:59.802Z,1538641619.802 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2018-10-04T08:26:59.802Z,1538641619.802 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:26:59.828Z,1538641619.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:26:59.830Z,1538641619.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:27:00.212Z,1538641620.212 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:27:00.212Z,1538641620.212 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2018-10-04T08:27:00.212Z,1538641620.212 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:27:00.212Z,1538641620.212 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2018-10-04T08:27:00.574Z,1538641620.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:27:00.574Z,1538641620.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:27:00.575Z,1538641620.575 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:27:00.575Z,1538641620.575 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:27:00.575Z,1538641620.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:27:00.576Z,1538641620.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:30:00.635Z,1538641800.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:30:00.635Z,1538641800.635 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2018-10-04T08:30:00.635Z,1538641800.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:30:00.641Z,1538641800.641 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:30:00.642Z,1538641800.642 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2018-10-04T08:30:00.642Z,1538641800.642 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:30:00.667Z,1538641800.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:30:00.668Z,1538641800.668 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:30:01.077Z,1538641801.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:30:01.077Z,1538641801.077 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2018-10-04T08:30:01.077Z,1538641801.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:30:01.077Z,1538641801.077 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2018-10-04T08:30:01.434Z,1538641801.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:30:01.435Z,1538641801.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:30:01.435Z,1538641801.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:30:01.435Z,1538641801.435 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:30:01.436Z,1538641801.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:30:01.436Z,1538641801.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:30:09.426Z,1538641809.426 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T08:25:06.7Z
2018-10-04T08:30:09.426Z,1538641809.426 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T08:30:09.426Z,1538641809.426 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T08:30:14.378Z,1538641814.378 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0076.lzma
2018-10-04T08:30:15.152Z,1538641815.152 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0076.lzma.bak
2018-10-04T08:30:15.152Z,1538641815.152 [DataOverHttps](INFO): SBD MOMSN=8610696
2018-10-04T08:30:24.278Z,1538641824.278 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0077.lzma
2018-10-04T08:30:25.040Z,1538641825.040 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0077.lzma.bak
2018-10-04T08:30:25.040Z,1538641825.040 [DataOverHttps](INFO): SBD MOMSN=8610698
2018-10-04T08:30:26.024Z,1538641826.024 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T08:30:26.024Z,1538641826.024 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T08:30:26.024Z,1538641826.024 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T08:33:01.448Z,1538641981.448 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:33:01.448Z,1538641981.448 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2018-10-04T08:33:01.448Z,1538641981.448 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:33:01.450Z,1538641981.450 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:33:01.450Z,1538641981.450 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2018-10-04T08:33:01.450Z,1538641981.450 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:33:01.496Z,1538641981.496 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:33:01.497Z,1538641981.497 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:33:01.883Z,1538641981.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:33:01.883Z,1538641981.883 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2018-10-04T08:33:01.883Z,1538641981.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:33:01.883Z,1538641981.883 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2018-10-04T08:33:02.238Z,1538641982.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:33:02.238Z,1538641982.238 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:33:02.239Z,1538641982.239 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:33:02.239Z,1538641982.239 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:33:02.239Z,1538641982.239 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:33:02.240Z,1538641982.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:35:26.249Z,1538642126.249 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T08:35:26.253Z,1538642126.253 [Default:CheckIn:C.Wait] Stopped
2018-10-04T08:35:26.253Z,1538642126.253 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T08:35:26.253Z,1538642126.253 [Default:CheckIn:D] Running Loop=1
2018-10-04T08:35:26.661Z,1538642126.661 [Default:CheckIn:D] Stopped
2018-10-04T08:35:26.661Z,1538642126.661 [Default:CheckIn:E] Running Loop=1
2018-10-04T08:35:27.053Z,1538642127.053 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 258.981543 min 
2018-10-04T08:35:27.053Z,1538642127.053 [Default:CheckIn:E] Stopped
2018-10-04T08:35:27.054Z,1538642127.054 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T08:35:27.054Z,1538642127.054 [Default:CheckIn] Stopped
2018-10-04T08:35:27.054Z,1538642127.054 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T08:35:27.054Z,1538642127.054 [Default:CheckIn](INFO): Running loop #26
2018-10-04T08:35:27.054Z,1538642127.054 [Default:CheckIn] Running Loop=26
2018-10-04T08:35:27.054Z,1538642127.054 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T08:35:27.054Z,1538642127.054 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T08:36:02.271Z,1538642162.271 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:36:02.271Z,1538642162.271 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2018-10-04T08:36:02.271Z,1538642162.271 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:36:02.273Z,1538642162.273 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:36:02.273Z,1538642162.273 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2018-10-04T08:36:02.273Z,1538642162.273 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:36:02.313Z,1538642162.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:36:02.313Z,1538642162.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:36:02.726Z,1538642162.726 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:36:02.726Z,1538642162.726 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2018-10-04T08:36:02.727Z,1538642162.727 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:36:02.727Z,1538642162.727 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2018-10-04T08:36:03.114Z,1538642163.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:36:03.114Z,1538642163.114 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:36:03.115Z,1538642163.115 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:36:03.115Z,1538642163.115 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:36:03.115Z,1538642163.115 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:36:03.116Z,1538642163.116 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:36:50.801Z,1538642210.801 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T08:36:50.802Z,1538642210.802 [NAL9602] Data Fault, FailCount= 4
2018-10-04T08:36:50.802Z,1538642210.802 [NAL9602](ERROR): Data Fault
2018-10-04T08:36:50.887Z,1538642210.887 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T08:36:51.195Z,1538642211.195 [NAL9602](INFO): Powering down
2018-10-04T08:36:52.051Z,1538642212.051 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T08:36:52.052Z,1538642212.052 [NAL9602] No Fault, FailCount= 4
2018-10-04T08:37:21.477Z,1538642241.477 [NAL9602](INFO): Powering up NAL9602
2018-10-04T08:37:33.595Z,1538642253.595 [NAL9602](INFO): NAL9602 initialized
2018-10-04T08:39:03.119Z,1538642343.119 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:39:03.119Z,1538642343.119 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2018-10-04T08:39:03.119Z,1538642343.119 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:39:03.121Z,1538642343.121 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:39:03.121Z,1538642343.121 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2018-10-04T08:39:03.121Z,1538642343.121 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:39:03.140Z,1538642343.140 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:39:03.140Z,1538642343.140 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:39:03.578Z,1538642343.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:39:03.578Z,1538642343.578 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2018-10-04T08:39:03.579Z,1538642343.579 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:39:03.579Z,1538642343.579 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2018-10-04T08:39:03.921Z,1538642343.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:39:03.922Z,1538642343.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:39:03.922Z,1538642343.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:39:03.923Z,1538642343.923 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:39:03.923Z,1538642343.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:39:03.923Z,1538642343.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:40:29.658Z,1538642429.658 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T08:35:27.1Z
2018-10-04T08:40:29.658Z,1538642429.658 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T08:40:29.658Z,1538642429.658 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T08:40:34.598Z,1538642434.598 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0079.lzma
2018-10-04T08:40:35.365Z,1538642435.365 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0079.lzma.bak
2018-10-04T08:40:35.365Z,1538642435.365 [DataOverHttps](INFO): SBD MOMSN=8610702
2018-10-04T08:40:44.641Z,1538642444.641 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0080.lzma
2018-10-04T08:40:46.599Z,1538642446.599 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0080.lzma.bak
2018-10-04T08:40:46.599Z,1538642446.599 [DataOverHttps](INFO): SBD MOMSN=8610704
2018-10-04T08:40:47.279Z,1538642447.279 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T08:40:47.280Z,1538642447.280 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T08:40:47.280Z,1538642447.280 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T08:42:04.211Z,1538642524.211 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:42:04.211Z,1538642524.211 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2018-10-04T08:42:04.211Z,1538642524.211 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:42:04.217Z,1538642524.217 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:42:04.218Z,1538642524.218 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2018-10-04T08:42:04.218Z,1538642524.218 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:42:04.243Z,1538642524.243 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:42:04.243Z,1538642524.243 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:42:04.650Z,1538642524.650 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:42:04.650Z,1538642524.650 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2018-10-04T08:42:04.651Z,1538642524.651 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:42:04.651Z,1538642524.651 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2018-10-04T08:42:05.015Z,1538642525.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:42:05.016Z,1538642525.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:42:05.016Z,1538642525.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:42:05.016Z,1538642525.016 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:42:05.017Z,1538642525.017 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:42:05.017Z,1538642525.017 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:45:05.171Z,1538642705.171 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:45:05.171Z,1538642705.171 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2018-10-04T08:45:05.171Z,1538642705.171 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:45:05.173Z,1538642705.173 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:45:05.173Z,1538642705.173 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2018-10-04T08:45:05.173Z,1538642705.173 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:45:05.199Z,1538642705.199 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:45:05.199Z,1538642705.199 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:45:05.627Z,1538642705.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:45:05.627Z,1538642705.627 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2018-10-04T08:45:05.628Z,1538642705.628 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:45:05.628Z,1538642705.628 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2018-10-04T08:45:05.990Z,1538642705.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:45:05.990Z,1538642705.990 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:45:05.991Z,1538642705.991 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:45:05.991Z,1538642705.991 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:45:05.992Z,1538642705.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:45:05.992Z,1538642705.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:45:47.714Z,1538642747.714 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T08:45:47.715Z,1538642747.715 [Default:CheckIn:C.Wait] Stopped
2018-10-04T08:45:47.715Z,1538642747.715 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T08:45:47.715Z,1538642747.715 [Default:CheckIn:D] Running Loop=1
2018-10-04T08:45:48.110Z,1538642748.110 [Default:CheckIn:D] Stopped
2018-10-04T08:45:48.110Z,1538642748.110 [Default:CheckIn:E] Running Loop=1
2018-10-04T08:45:48.514Z,1538642748.514 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 269.339030 min 
2018-10-04T08:45:48.514Z,1538642748.514 [Default:CheckIn:E] Stopped
2018-10-04T08:45:48.514Z,1538642748.514 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T08:45:48.514Z,1538642748.514 [Default:CheckIn] Stopped
2018-10-04T08:45:48.514Z,1538642748.514 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T08:45:48.514Z,1538642748.514 [Default:CheckIn](INFO): Running loop #27
2018-10-04T08:45:48.515Z,1538642748.515 [Default:CheckIn] Running Loop=27
2018-10-04T08:45:48.515Z,1538642748.515 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T08:45:48.515Z,1538642748.515 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T08:47:36.495Z,1538642856.495 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T08:47:36.495Z,1538642856.495 [NAL9602] Data Fault, FailCount= 5
2018-10-04T08:47:36.495Z,1538642856.495 [NAL9602](ERROR): Data Fault
2018-10-04T08:47:36.588Z,1538642856.588 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T08:47:36.593Z,1538642856.593 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T08:47:36.903Z,1538642856.903 [NAL9602](INFO): Powering down
2018-10-04T08:47:36.954Z,1538642856.954 [CBIT](INFO): Critical error at 20181004T084736
2018-10-04T08:48:06.291Z,1538642886.291 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:48:06.291Z,1538642886.291 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2018-10-04T08:48:06.291Z,1538642886.291 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:48:06.317Z,1538642886.317 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:48:06.317Z,1538642886.317 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2018-10-04T08:48:06.317Z,1538642886.317 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:48:06.347Z,1538642886.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:48:06.347Z,1538642886.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:48:06.736Z,1538642886.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:48:06.736Z,1538642886.736 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2018-10-04T08:48:06.736Z,1538642886.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:48:06.736Z,1538642886.736 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2018-10-04T08:48:07.086Z,1538642887.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:48:07.086Z,1538642887.086 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:48:07.086Z,1538642887.086 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:48:07.087Z,1538642887.087 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:48:07.087Z,1538642887.087 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:48:07.088Z,1538642887.088 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:49:30.567Z,1538642970.567 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T08:49:36.613Z,1538642976.613 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T08:49:36.614Z,1538642976.614 [NAL9602] No Fault, FailCount= 5
2018-10-04T08:49:39.678Z,1538642979.678 [NAL9602](INFO): Powering up NAL9602
2018-10-04T08:49:50.611Z,1538642990.611 [NAL9602](INFO): NAL9602 initialized
2018-10-04T08:50:50.316Z,1538643050.316 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T08:50:50.316Z,1538643050.316 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100401554329,35.048.9,  0
2018-10-04T08:50:50.358Z,1538643050.358 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T08:45:48.5Z
2018-10-04T08:50:50.358Z,1538643050.358 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T08:50:50.358Z,1538643050.358 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T08:50:55.312Z,1538643055.312 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20181004T041305/Courier0082.lzma
2018-10-04T08:50:56.088Z,1538643056.088 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0082.lzma.bak
2018-10-04T08:50:56.089Z,1538643056.089 [DataOverHttps](INFO): SBD MOMSN=8610708
2018-10-04T08:51:05.297Z,1538643065.297 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0083.lzma
2018-10-04T08:51:06.044Z,1538643066.044 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0083.lzma.bak
2018-10-04T08:51:06.044Z,1538643066.044 [DataOverHttps](INFO): SBD MOMSN=8610711
2018-10-04T08:51:06.976Z,1538643066.976 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T08:51:06.976Z,1538643066.976 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T08:51:06.976Z,1538643066.976 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T08:51:07.099Z,1538643067.099 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:51:07.099Z,1538643067.099 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2018-10-04T08:51:07.099Z,1538643067.099 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:51:07.105Z,1538643067.105 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:51:07.105Z,1538643067.105 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2018-10-04T08:51:07.106Z,1538643067.106 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:51:07.123Z,1538643067.123 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:51:07.123Z,1538643067.123 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:51:10.296Z,1538643070.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:51:10.297Z,1538643070.297 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2018-10-04T08:51:10.297Z,1538643070.297 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:51:10.297Z,1538643070.297 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2018-10-04T08:51:10.414Z,1538643070.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:51:10.414Z,1538643070.414 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:51:10.415Z,1538643070.415 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:51:10.415Z,1538643070.415 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:51:10.416Z,1538643070.416 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:51:10.416Z,1538643070.416 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:53:18.979Z,1538643198.979 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe,*15.894,*-0.000,*0.000
2018-10-04T08:54:10.803Z,1538643250.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:54:10.804Z,1538643250.804 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2018-10-04T08:54:10.804Z,1538643250.804 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:54:10.810Z,1538643250.810 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:54:10.810Z,1538643250.810 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2018-10-04T08:54:10.810Z,1538643250.810 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:54:10.842Z,1538643250.842 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:54:10.842Z,1538643250.842 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:54:11.226Z,1538643251.226 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:54:11.227Z,1538643251.227 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2018-10-04T08:54:11.227Z,1538643251.227 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:54:11.227Z,1538643251.227 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2018-10-04T08:54:11.608Z,1538643251.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:54:11.608Z,1538643251.608 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:54:11.609Z,1538643251.609 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:54:11.609Z,1538643251.609 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:54:11.610Z,1538643251.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:54:11.610Z,1538643251.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:56:07.165Z,1538643367.165 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T08:56:07.165Z,1538643367.165 [Default:CheckIn:C.Wait] Stopped
2018-10-04T08:56:07.165Z,1538643367.165 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T08:56:07.166Z,1538643367.166 [Default:CheckIn:D] Running Loop=1
2018-10-04T08:56:07.579Z,1538643367.579 [Default:CheckIn:D] Stopped
2018-10-04T08:56:07.579Z,1538643367.579 [Default:CheckIn:E] Running Loop=1
2018-10-04T08:56:07.963Z,1538643367.963 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 279.663509 min 
2018-10-04T08:56:07.963Z,1538643367.963 [Default:CheckIn:E] Stopped
2018-10-04T08:56:07.963Z,1538643367.963 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T08:56:07.963Z,1538643367.963 [Default:CheckIn] Stopped
2018-10-04T08:56:07.963Z,1538643367.963 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T08:56:07.964Z,1538643367.964 [Default:CheckIn](INFO): Running loop #28
2018-10-04T08:56:07.964Z,1538643367.964 [Default:CheckIn] Running Loop=28
2018-10-04T08:56:07.964Z,1538643367.964 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T08:56:07.964Z,1538643367.964 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T08:57:08.985Z,1538643428.985 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T08:57:08.985Z,1538643428.985 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100402020429,35.0, -0.1,   0.0,1448.9,,-32768,-32768,-32768,-32768,V
2018-10-04T08:57:11.819Z,1538643431.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:57:11.819Z,1538643431.819 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2018-10-04T08:57:11.819Z,1538643431.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T08:57:11.825Z,1538643431.825 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T08:57:11.826Z,1538643431.826 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2018-10-04T08:57:11.826Z,1538643431.826 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T08:57:11.847Z,1538643431.847 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T08:57:11.847Z,1538643431.847 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T08:57:12.226Z,1538643432.226 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T08:57:12.226Z,1538643432.226 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2018-10-04T08:57:12.226Z,1538643432.226 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T08:57:12.226Z,1538643432.226 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2018-10-04T08:57:12.634Z,1538643432.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T08:57:12.634Z,1538643432.634 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:57:12.635Z,1538643432.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:57:12.635Z,1538643432.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T08:57:12.635Z,1538643432.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T08:57:12.636Z,1538643432.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T08:59:50.957Z,1538643590.957 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-04T08:59:53.715Z,1538643593.715 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T08:59:53.715Z,1538643593.715 [NAL9602] Data Fault, FailCount= 1
2018-10-04T08:59:53.715Z,1538643593.715 [NAL9602](ERROR): Data Fault
2018-10-04T08:59:53.797Z,1538643593.797 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T08:59:54.119Z,1538643594.119 [NAL9602](INFO): Powering down
2018-10-04T08:59:54.976Z,1538643594.976 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T08:59:54.976Z,1538643594.976 [NAL9602] No Fault, FailCount= 1
2018-10-04T09:00:13.011Z,1538643613.011 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:00:13.011Z,1538643613.011 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2018-10-04T09:00:13.011Z,1538643613.011 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:00:13.014Z,1538643613.014 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:00:13.014Z,1538643613.014 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2018-10-04T09:00:13.014Z,1538643613.014 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:00:13.070Z,1538643613.070 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:00:13.070Z,1538643613.070 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:00:13.450Z,1538643613.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:00:13.450Z,1538643613.450 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2018-10-04T09:00:13.451Z,1538643613.451 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:00:13.451Z,1538643613.451 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2018-10-04T09:00:13.834Z,1538643613.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:00:13.835Z,1538643613.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:00:13.835Z,1538643613.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:00:13.835Z,1538643613.835 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:00:13.836Z,1538643613.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:00:13.836Z,1538643613.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:00:24.169Z,1538643624.169 [NAL9602](INFO): Powering up NAL9602
2018-10-04T09:00:35.899Z,1538643635.899 [NAL9602](INFO): NAL9602 initialized
2018-10-04T09:01:10.703Z,1538643670.703 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T08:56:07.0Z
2018-10-04T09:01:10.703Z,1538643670.703 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T09:01:10.703Z,1538643670.703 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T09:01:15.724Z,1538643675.724 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0085.lzma
2018-10-04T09:01:16.500Z,1538643676.500 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0085.lzma.bak
2018-10-04T09:01:16.500Z,1538643676.500 [DataOverHttps](INFO): SBD MOMSN=8610715
2018-10-04T09:01:28.480Z,1538643688.480 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0086.lzma
2018-10-04T09:01:29.280Z,1538643689.280 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0086.lzma.bak
2018-10-04T09:01:29.281Z,1538643689.281 [DataOverHttps](INFO): SBD MOMSN=8610717
2018-10-04T09:01:30.326Z,1538643690.326 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T09:01:30.326Z,1538643690.326 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T09:01:30.326Z,1538643690.326 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T09:03:13.981Z,1538643793.981 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:03:13.981Z,1538643793.981 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2018-10-04T09:03:13.981Z,1538643793.981 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:03:13.983Z,1538643793.983 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:03:13.983Z,1538643793.983 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2018-10-04T09:03:13.983Z,1538643793.983 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:03:13.996Z,1538643793.996 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:03:13.997Z,1538643793.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:03:14.412Z,1538643794.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:03:14.412Z,1538643794.412 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2018-10-04T09:03:14.418Z,1538643794.418 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:03:14.418Z,1538643794.418 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2018-10-04T09:03:14.794Z,1538643794.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:03:14.795Z,1538643794.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:03:14.795Z,1538643794.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:03:14.796Z,1538643794.796 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:03:14.796Z,1538643794.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:03:14.796Z,1538643794.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:06:16.166Z,1538643976.166 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:06:16.166Z,1538643976.166 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2018-10-04T09:06:16.166Z,1538643976.166 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:06:16.168Z,1538643976.168 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:06:16.168Z,1538643976.168 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2018-10-04T09:06:16.168Z,1538643976.168 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:06:16.181Z,1538643976.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:06:16.181Z,1538643976.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:06:16.319Z,1538643976.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:06:16.319Z,1538643976.319 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2018-10-04T09:06:16.320Z,1538643976.320 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:06:16.320Z,1538643976.320 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2018-10-04T09:06:16.651Z,1538643976.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:06:16.651Z,1538643976.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:06:16.652Z,1538643976.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:06:16.652Z,1538643976.652 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:06:16.653Z,1538643976.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:06:16.661Z,1538643976.661 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:06:30.666Z,1538643990.666 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T09:06:30.666Z,1538643990.666 [Default:CheckIn:C.Wait] Stopped
2018-10-04T09:06:30.666Z,1538643990.666 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T09:06:30.666Z,1538643990.666 [Default:CheckIn:D] Running Loop=1
2018-10-04T09:06:31.077Z,1538643991.077 [Default:CheckIn:D] Stopped
2018-10-04T09:06:31.077Z,1538643991.077 [Default:CheckIn:E] Running Loop=1
2018-10-04T09:06:31.486Z,1538643991.486 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 290.055078 min 
2018-10-04T09:06:31.486Z,1538643991.486 [Default:CheckIn:E] Stopped
2018-10-04T09:06:31.486Z,1538643991.486 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T09:06:31.487Z,1538643991.487 [Default:CheckIn] Stopped
2018-10-04T09:06:31.487Z,1538643991.487 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T09:06:31.487Z,1538643991.487 [Default:CheckIn](INFO): Running loop #29
2018-10-04T09:06:31.487Z,1538643991.487 [Default:CheckIn] Running Loop=29
2018-10-04T09:06:31.487Z,1538643991.487 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T09:06:31.487Z,1538643991.487 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T09:09:16.958Z,1538644156.958 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:09:16.958Z,1538644156.958 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2018-10-04T09:09:16.958Z,1538644156.958 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:09:16.960Z,1538644156.960 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:09:16.960Z,1538644156.960 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2018-10-04T09:09:16.960Z,1538644156.960 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:09:16.992Z,1538644156.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:09:16.992Z,1538644156.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:09:17.386Z,1538644157.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:09:17.386Z,1538644157.386 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2018-10-04T09:09:17.387Z,1538644157.387 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:09:17.387Z,1538644157.387 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2018-10-04T09:09:17.775Z,1538644157.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:09:17.775Z,1538644157.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:09:17.776Z,1538644157.776 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:09:17.776Z,1538644157.776 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:09:17.785Z,1538644157.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:09:17.785Z,1538644157.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:10:17.879Z,1538644217.879 [RDI_Pathfinder](ERROR): only read 2 of 5 data items
2018-10-04T09:10:17.879Z,1538644217.879 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,3278,-32768,V
2018-10-04T09:10:38.755Z,1538644238.755 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T09:10:38.755Z,1538644238.755 [NAL9602] Data Fault, FailCount= 2
2018-10-04T09:10:38.755Z,1538644238.755 [NAL9602](ERROR): Data Fault
2018-10-04T09:10:38.843Z,1538644238.843 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T09:10:39.155Z,1538644239.155 [NAL9602](INFO): Powering down
2018-10-04T09:10:40.044Z,1538644240.044 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T09:10:40.044Z,1538644240.044 [NAL9602] No Fault, FailCount= 2
2018-10-04T09:11:09.267Z,1538644269.267 [NAL9602](INFO): Powering up NAL9602
2018-10-04T09:11:20.080Z,1538644280.080 [NAL9602](INFO): NAL9602 initialized
2018-10-04T09:11:34.046Z,1538644294.046 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T09:06:31.5Z
2018-10-04T09:11:34.046Z,1538644294.046 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T09:11:34.046Z,1538644294.046 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T09:11:39.005Z,1538644299.005 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0088.lzma
2018-10-04T09:11:39.784Z,1538644299.784 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0088.lzma.bak
2018-10-04T09:11:39.784Z,1538644299.784 [DataOverHttps](INFO): SBD MOMSN=8610721
2018-10-04T09:11:48.986Z,1538644308.986 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0089.lzma
2018-10-04T09:11:49.737Z,1538644309.737 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0089.lzma.bak
2018-10-04T09:11:49.737Z,1538644309.737 [DataOverHttps](INFO): SBD MOMSN=8610723
2018-10-04T09:11:50.658Z,1538644310.658 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T09:11:50.659Z,1538644310.659 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T09:11:50.659Z,1538644310.659 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T09:11:56.620Z,1538644316.620 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-04T09:11:56.621Z,1538644316.621 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,.535
2018-10-04T09:12:17.834Z,1538644337.834 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:12:17.837Z,1538644337.837 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2018-10-04T09:12:17.837Z,1538644337.837 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:12:17.839Z,1538644337.839 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:12:17.839Z,1538644337.839 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2018-10-04T09:12:17.839Z,1538644337.839 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:12:17.861Z,1538644337.861 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:12:17.861Z,1538644337.861 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:12:18.231Z,1538644338.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:12:18.231Z,1538644338.231 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2018-10-04T09:12:18.231Z,1538644338.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:12:18.231Z,1538644338.231 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2018-10-04T09:12:18.624Z,1538644338.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:12:18.629Z,1538644338.629 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:12:18.629Z,1538644338.629 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:12:18.630Z,1538644338.630 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:12:18.630Z,1538644338.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:12:18.630Z,1538644338.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:15:18.999Z,1538644518.999 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:15:18.999Z,1538644518.999 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2018-10-04T09:15:18.000Z,1538644519.000 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:15:19.002Z,1538644519.002 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:15:19.002Z,1538644519.002 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2018-10-04T09:15:19.002Z,1538644519.002 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:15:19.031Z,1538644519.031 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:15:19.032Z,1538644519.032 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:15:19.032Z,1538644519.032 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:15:19.032Z,1538644519.032 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:15:37.500Z,1538644537.500 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.887, -0.007, 0.000
2018-10-04T09:16:51.159Z,1538644611.159 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T09:16:51.159Z,1538644611.159 [Default:CheckIn:C.Wait] Stopped
2018-10-04T09:16:51.159Z,1538644611.159 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T09:16:51.159Z,1538644611.159 [Default:CheckIn:D] Running Loop=1
2018-10-04T09:16:51.579Z,1538644611.579 [Default:CheckIn:D] Stopped
2018-10-04T09:16:51.579Z,1538644611.579 [Default:CheckIn:E] Running Loop=1
2018-10-04T09:16:51.958Z,1538644611.958 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 300.396842 min 
2018-10-04T09:16:51.959Z,1538644611.959 [Default:CheckIn:E] Stopped
2018-10-04T09:16:51.959Z,1538644611.959 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T09:16:51.959Z,1538644611.959 [Default:CheckIn] Stopped
2018-10-04T09:16:51.959Z,1538644611.959 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T09:16:51.959Z,1538644611.959 [Default:CheckIn](INFO): Running loop #30
2018-10-04T09:16:51.959Z,1538644611.959 [Default:CheckIn] Running Loop=30
2018-10-04T09:16:51.959Z,1538644611.959 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T09:16:51.960Z,1538644611.960 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T09:21:21.567Z,1538644881.567 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T09:21:21.567Z,1538644881.567 [NAL9602] Data Fault, FailCount= 3
2018-10-04T09:21:21.567Z,1538644881.567 [NAL9602](ERROR): Data Fault
2018-10-04T09:21:21.693Z,1538644881.693 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T09:21:21.959Z,1538644881.959 [NAL9602](INFO): Powering down
2018-10-04T09:21:22.884Z,1538644882.884 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T09:21:22.884Z,1538644882.884 [NAL9602] No Fault, FailCount= 3
2018-10-04T09:21:53.935Z,1538644913.935 [NAL9602](INFO): Powering up NAL9602
2018-10-04T09:21:54.019Z,1538644914.019 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T09:16:51.0Z
2018-10-04T09:21:54.019Z,1538644914.019 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T09:21:54.019Z,1538644914.019 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T09:21:59.145Z,1538644919.145 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0091.lzma
2018-10-04T09:21:59.921Z,1538644919.921 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0091.lzma.bak
2018-10-04T09:21:59.921Z,1538644919.921 [DataOverHttps](INFO): SBD MOMSN=8610727
2018-10-04T09:22:05.203Z,1538644925.203 [NAL9602](INFO): NAL9602 initialized
2018-10-04T09:22:09.686Z,1538644929.686 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20181004T041305/Express0092.lzma
2018-10-04T09:22:10.464Z,1538644930.464 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0092.lzma.bak
2018-10-04T09:22:10.464Z,1538644930.464 [DataOverHttps](INFO): SBD MOMSN=8610729
2018-10-04T09:22:11.423Z,1538644931.423 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T09:22:11.423Z,1538644931.423 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T09:22:11.423Z,1538644931.423 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T09:22:14.685Z,1538644934.685 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,18505.17
2018-10-04T09:24:26.786Z,1538645066.786 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T09:27:11.823Z,1538645231.823 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T09:27:11.824Z,1538645231.824 [Default:CheckIn:C.Wait] Stopped
2018-10-04T09:27:11.824Z,1538645231.824 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T09:27:11.824Z,1538645231.824 [Default:CheckIn:D] Running Loop=1
2018-10-04T09:27:12.221Z,1538645232.221 [Default:CheckIn:D] Stopped
2018-10-04T09:27:12.221Z,1538645232.221 [Default:CheckIn:E] Running Loop=1
2018-10-04T09:27:12.643Z,1538645232.643 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 310.740885 min 
2018-10-04T09:27:12.644Z,1538645232.644 [Default:CheckIn:E] Stopped
2018-10-04T09:27:12.644Z,1538645232.644 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T09:27:12.644Z,1538645232.644 [Default:CheckIn] Stopped
2018-10-04T09:27:12.644Z,1538645232.644 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T09:27:12.644Z,1538645232.644 [Default:CheckIn](INFO): Running loop #31
2018-10-04T09:27:12.644Z,1538645232.644 [Default:CheckIn] Running Loop=31
2018-10-04T09:27:12.644Z,1538645232.644 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T09:27:12.644Z,1538645232.644 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T09:30:19.226Z,1538645419.226 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:30:19.226Z,1538645419.226 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2018-10-04T09:30:19.227Z,1538645419.227 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:30:19.227Z,1538645419.227 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2018-10-04T09:30:19.602Z,1538645419.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:30:19.602Z,1538645419.602 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:30:19.603Z,1538645419.603 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:30:19.603Z,1538645419.603 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:30:19.603Z,1538645419.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:30:19.604Z,1538645419.604 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:32:06.067Z,1538645526.067 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T09:32:06.067Z,1538645526.067 [NAL9602] Data Fault, FailCount= 4
2018-10-04T09:32:06.067Z,1538645526.067 [NAL9602](ERROR): Data Fault
2018-10-04T09:32:06.132Z,1538645526.132 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T09:32:06.459Z,1538645526.459 [NAL9602](INFO): Powering down
2018-10-04T09:32:07.320Z,1538645527.320 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T09:32:07.320Z,1538645527.320 [NAL9602] No Fault, FailCount= 4
2018-10-04T09:32:14.105Z,1538645534.105 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T09:27:12.6Z
2018-10-04T09:32:14.105Z,1538645534.105 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T09:32:14.105Z,1538645534.105 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T09:32:19.162Z,1538645539.162 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0094.lzma
2018-10-04T09:32:19.928Z,1538645539.928 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0094.lzma.bak
2018-10-04T09:32:19.928Z,1538645539.928 [DataOverHttps](INFO): SBD MOMSN=8610735
2018-10-04T09:32:29.093Z,1538645549.093 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0095.lzma
2018-10-04T09:32:29.872Z,1538645549.872 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0095.lzma.bak
2018-10-04T09:32:29.872Z,1538645549.872 [DataOverHttps](INFO): SBD MOMSN=8610737
2018-10-04T09:32:30.813Z,1538645550.813 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T09:32:30.813Z,1538645550.813 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T09:32:30.813Z,1538645550.813 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T09:32:36.531Z,1538645556.531 [NAL9602](INFO): Powering up NAL9602
2018-10-04T09:32:47.731Z,1538645567.731 [NAL9602](INFO): NAL9602 initialized
2018-10-04T09:33:19.855Z,1538645599.855 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:33:19.855Z,1538645599.855 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-10-04T09:33:19.855Z,1538645599.855 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:33:19.861Z,1538645599.861 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:33:19.861Z,1538645599.861 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-04T09:33:19.861Z,1538645599.861 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:33:19.883Z,1538645599.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:33:19.883Z,1538645599.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:33:20.260Z,1538645600.260 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:33:20.260Z,1538645600.260 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-10-04T09:33:20.260Z,1538645600.260 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:33:20.260Z,1538645600.260 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-04T09:33:20.643Z,1538645600.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:33:20.643Z,1538645600.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:33:20.643Z,1538645600.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:33:20.644Z,1538645600.644 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:33:20.644Z,1538645600.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:33:20.649Z,1538645600.649 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:36:20.738Z,1538645780.738 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:36:20.738Z,1538645780.738 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-10-04T09:36:20.739Z,1538645780.739 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:36:20.750Z,1538645780.750 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:36:20.750Z,1538645780.750 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-04T09:36:20.750Z,1538645780.750 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:36:20.800Z,1538645780.800 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:36:20.800Z,1538645780.800 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:36:21.178Z,1538645781.178 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:36:21.178Z,1538645781.178 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-10-04T09:36:21.179Z,1538645781.179 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:36:21.179Z,1538645781.179 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-04T09:36:21.538Z,1538645781.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:36:21.539Z,1538645781.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:36:21.539Z,1538645781.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:36:21.539Z,1538645781.539 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:36:21.540Z,1538645781.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:36:21.540Z,1538645781.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:37:30.983Z,1538645850.983 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T09:37:30.983Z,1538645850.983 [Default:CheckIn:C.Wait] Stopped
2018-10-04T09:37:30.983Z,1538645850.983 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T09:37:30.983Z,1538645850.983 [Default:CheckIn:D] Running Loop=1
2018-10-04T09:37:31.356Z,1538645851.356 [Default:CheckIn:D] Stopped
2018-10-04T09:37:31.356Z,1538645851.356 [Default:CheckIn:E] Running Loop=1
2018-10-04T09:37:31.771Z,1538645851.771 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 321.059798 min 
2018-10-04T09:37:31.771Z,1538645851.771 [Default:CheckIn:E] Stopped
2018-10-04T09:37:31.771Z,1538645851.771 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T09:37:31.771Z,1538645851.771 [Default:CheckIn] Stopped
2018-10-04T09:37:31.771Z,1538645851.771 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T09:37:31.771Z,1538645851.771 [Default:CheckIn](INFO): Running loop #32
2018-10-04T09:37:31.772Z,1538645851.772 [Default:CheckIn] Running Loop=32
2018-10-04T09:37:31.772Z,1538645851.772 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T09:37:31.772Z,1538645851.772 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T09:39:21.627Z,1538645961.627 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:39:21.627Z,1538645961.627 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-10-04T09:39:21.627Z,1538645961.627 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:39:21.629Z,1538645961.629 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:39:21.629Z,1538645961.629 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-04T09:39:21.630Z,1538645961.630 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:39:21.655Z,1538645961.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:39:21.655Z,1538645961.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:39:22.004Z,1538645962.004 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:39:22.004Z,1538645962.004 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-10-04T09:39:22.005Z,1538645962.005 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:39:22.009Z,1538645962.009 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-04T09:39:22.396Z,1538645962.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:39:22.401Z,1538645962.401 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:39:22.401Z,1538645962.401 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:39:22.402Z,1538645962.402 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:39:22.402Z,1538645962.402 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:39:22.402Z,1538645962.402 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:42:22.423Z,1538646142.423 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:42:22.423Z,1538646142.423 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-10-04T09:42:22.423Z,1538646142.423 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:42:22.425Z,1538646142.425 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:42:22.425Z,1538646142.425 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-04T09:42:22.425Z,1538646142.425 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:42:22.438Z,1538646142.438 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:42:22.439Z,1538646142.439 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:42:22.806Z,1538646142.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:42:22.806Z,1538646142.806 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-10-04T09:42:22.807Z,1538646142.807 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:42:22.807Z,1538646142.807 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-04T09:42:23.194Z,1538646143.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:42:23.194Z,1538646143.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:42:23.195Z,1538646143.195 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:42:23.195Z,1538646143.195 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:42:23.196Z,1538646143.196 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:42:23.196Z,1538646143.196 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:42:34.442Z,1538646154.442 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T09:37:31.8Z
2018-10-04T09:42:34.442Z,1538646154.442 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T09:42:34.442Z,1538646154.442 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T09:42:39.422Z,1538646159.422 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0097.lzma
2018-10-04T09:42:40.200Z,1538646160.200 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0097.lzma.bak
2018-10-04T09:42:40.200Z,1538646160.200 [DataOverHttps](INFO): SBD MOMSN=8610741
2018-10-04T09:42:49.365Z,1538646169.365 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20181004T041305/Express0098.lzma
2018-10-04T09:42:49.749Z,1538646169.749 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T09:42:49.749Z,1538646169.749 [NAL9602] Data Fault, FailCount= 5
2018-10-04T09:42:49.749Z,1538646169.749 [NAL9602](ERROR): Data Fault
2018-10-04T09:42:49.823Z,1538646169.823 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T09:42:49.823Z,1538646169.823 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T09:42:50.128Z,1538646170.128 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0098.lzma.bak
2018-10-04T09:42:50.128Z,1538646170.128 [DataOverHttps](INFO): SBD MOMSN=8610743
2018-10-04T09:42:50.157Z,1538646170.157 [NAL9602](INFO): Powering down
2018-10-04T09:42:50.210Z,1538646170.210 [CBIT](INFO): Critical error at 20181004T094249
2018-10-04T09:42:51.234Z,1538646171.234 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T09:42:51.234Z,1538646171.234 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T09:42:51.234Z,1538646171.234 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T09:44:50.135Z,1538646290.135 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T09:44:50.135Z,1538646290.135 [NAL9602] No Fault, FailCount= 5
2018-10-04T09:44:50.463Z,1538646290.463 [NAL9602](INFO): Powering up NAL9602
2018-10-04T09:45:01.659Z,1538646301.659 [NAL9602](INFO): NAL9602 initialized
2018-10-04T09:45:23.403Z,1538646323.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:45:23.403Z,1538646323.403 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-10-04T09:45:23.403Z,1538646323.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:45:23.409Z,1538646323.409 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:45:23.409Z,1538646323.409 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-04T09:45:23.409Z,1538646323.409 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:45:23.435Z,1538646323.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:45:23.435Z,1538646323.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:45:23.791Z,1538646323.791 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:45:23.791Z,1538646323.791 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-10-04T09:45:23.792Z,1538646323.792 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:45:23.792Z,1538646323.792 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-04T09:45:24.178Z,1538646324.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:45:24.178Z,1538646324.178 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:45:24.179Z,1538646324.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:45:24.179Z,1538646324.179 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:45:24.179Z,1538646324.179 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:45:24.180Z,1538646324.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:45:52.670Z,1538646352.670 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T09:46:28.793Z,1538646388.793 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T09:47:51.729Z,1538646471.729 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T09:47:51.729Z,1538646471.729 [Default:CheckIn:C.Wait] Stopped
2018-10-04T09:47:51.729Z,1538646471.729 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T09:47:51.730Z,1538646471.730 [Default:CheckIn:D] Running Loop=1
2018-10-04T09:47:52.119Z,1538646472.119 [Default:CheckIn:D] Stopped
2018-10-04T09:47:52.119Z,1538646472.119 [Default:CheckIn:E] Running Loop=1
2018-10-04T09:47:52.539Z,1538646472.539 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 331.405859 min 
2018-10-04T09:47:52.539Z,1538646472.539 [Default:CheckIn:E] Stopped
2018-10-04T09:47:52.539Z,1538646472.539 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T09:47:52.539Z,1538646472.539 [Default:CheckIn] Stopped
2018-10-04T09:47:52.539Z,1538646472.539 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T09:47:52.540Z,1538646472.540 [Default:CheckIn](INFO): Running loop #33
2018-10-04T09:47:52.540Z,1538646472.540 [Default:CheckIn] Running Loop=33
2018-10-04T09:47:52.540Z,1538646472.540 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T09:47:52.540Z,1538646472.540 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T09:48:24.215Z,1538646504.215 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:48:24.215Z,1538646504.215 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-10-04T09:48:24.215Z,1538646504.215 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:48:24.217Z,1538646504.217 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:48:24.217Z,1538646504.217 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-04T09:48:24.217Z,1538646504.217 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:48:24.230Z,1538646504.230 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:48:24.230Z,1538646504.230 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:48:24.652Z,1538646504.652 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:48:24.653Z,1538646504.653 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-10-04T09:48:24.657Z,1538646504.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:48:24.657Z,1538646504.657 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-04T09:48:25.026Z,1538646505.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:48:25.026Z,1538646505.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:48:25.027Z,1538646505.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:48:25.027Z,1538646505.027 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:48:25.027Z,1538646505.027 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:48:25.028Z,1538646505.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:50:35.779Z,1538646635.779 [BPC1](ERROR): BPC1B failed to parse battery data due to unrecognized msg size.
2018-10-04T09:50:41.367Z,1538646641.367 [BPC1](ERROR): BPC1B failed to parse battery data due to unrecognized msg size.
2018-10-04T09:51:25.251Z,1538646685.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:51:25.251Z,1538646685.251 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-10-04T09:51:25.251Z,1538646685.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:51:25.253Z,1538646685.253 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:51:25.253Z,1538646685.253 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-04T09:51:25.253Z,1538646685.253 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:51:25.290Z,1538646685.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:51:25.291Z,1538646685.291 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:51:25.694Z,1538646685.694 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:51:25.694Z,1538646685.694 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-10-04T09:51:25.695Z,1538646685.695 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:51:25.695Z,1538646685.695 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-04T09:51:26.042Z,1538646686.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:51:26.042Z,1538646686.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:51:26.043Z,1538646686.043 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:51:26.043Z,1538646686.043 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:51:26.043Z,1538646686.043 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:51:26.044Z,1538646686.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:51:45.646Z,1538646705.646 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T09:52:54.616Z,1538646774.616 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T09:47:52.5Z
2018-10-04T09:52:54.616Z,1538646774.616 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T09:52:54.616Z,1538646774.616 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T09:52:59.861Z,1538646779.861 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0100.lzma
2018-10-04T09:53:00.640Z,1538646780.640 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0100.lzma.bak
2018-10-04T09:53:00.640Z,1538646780.640 [DataOverHttps](INFO): SBD MOMSN=8610746
2018-10-04T09:53:09.898Z,1538646789.898 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0101.lzma
2018-10-04T09:53:10.662Z,1538646790.662 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0101.lzma.bak
2018-10-04T09:53:10.662Z,1538646790.662 [DataOverHttps](INFO): SBD MOMSN=8610749
2018-10-04T09:53:11.618Z,1538646791.618 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T09:53:11.618Z,1538646791.618 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T09:53:11.618Z,1538646791.618 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T09:54:26.146Z,1538646866.146 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:54:26.146Z,1538646866.146 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-10-04T09:54:26.146Z,1538646866.146 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:54:26.148Z,1538646866.148 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:54:26.148Z,1538646866.148 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-04T09:54:26.148Z,1538646866.148 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:54:26.185Z,1538646866.185 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:54:26.186Z,1538646866.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:54:26.591Z,1538646866.591 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:54:26.591Z,1538646866.591 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-10-04T09:54:26.591Z,1538646866.591 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:54:26.591Z,1538646866.591 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-04T09:54:26.938Z,1538646866.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:54:26.938Z,1538646866.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:54:26.939Z,1538646866.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:54:26.939Z,1538646866.939 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:54:26.940Z,1538646866.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:54:26.940Z,1538646866.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:55:02.635Z,1538646902.635 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T09:55:02.636Z,1538646902.636 [NAL9602] Data Fault, FailCount= 1
2018-10-04T09:55:02.636Z,1538646902.636 [NAL9602](ERROR): Data Fault
2018-10-04T09:55:02.726Z,1538646902.726 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T09:55:03.027Z,1538646903.027 [NAL9602](INFO): Powering down
2018-10-04T09:55:03.884Z,1538646903.884 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T09:55:03.884Z,1538646903.884 [NAL9602] No Fault, FailCount= 1
2018-10-04T09:55:33.060Z,1538646933.060 [NAL9602](INFO): Powering up NAL9602
2018-10-04T09:55:43.903Z,1538646943.903 [NAL9602](INFO): NAL9602 initialized
2018-10-04T09:56:58.197Z,1538647018.197 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T09:57:27.091Z,1538647047.091 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:57:27.091Z,1538647047.091 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-10-04T09:57:27.091Z,1538647047.091 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T09:57:27.109Z,1538647047.109 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T09:57:27.109Z,1538647047.109 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-04T09:57:27.109Z,1538647047.109 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T09:57:27.136Z,1538647047.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T09:57:27.136Z,1538647047.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T09:57:27.528Z,1538647047.528 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T09:57:27.528Z,1538647047.528 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-10-04T09:57:27.528Z,1538647047.528 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T09:57:27.529Z,1538647047.529 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-04T09:57:27.870Z,1538647047.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T09:57:27.870Z,1538647047.870 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:57:27.871Z,1538647047.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:57:27.871Z,1538647047.871 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T09:57:27.871Z,1538647047.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T09:57:27.872Z,1538647047.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T09:58:12.010Z,1538647092.010 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T09:58:12.010Z,1538647092.010 [Default:CheckIn:C.Wait] Stopped
2018-10-04T09:58:12.010Z,1538647092.010 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T09:58:12.010Z,1538647092.010 [Default:CheckIn:D] Running Loop=1
2018-10-04T09:58:12.450Z,1538647092.450 [Default:CheckIn:D] Stopped
2018-10-04T09:58:12.450Z,1538647092.450 [Default:CheckIn:E] Running Loop=1
2018-10-04T09:58:12.823Z,1538647092.823 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 341.744694 min 
2018-10-04T09:58:12.823Z,1538647092.823 [Default:CheckIn:E] Stopped
2018-10-04T09:58:12.823Z,1538647092.823 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T09:58:12.823Z,1538647092.823 [Default:CheckIn] Stopped
2018-10-04T09:58:12.824Z,1538647092.824 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T09:58:12.824Z,1538647092.824 [Default:CheckIn](INFO): Running loop #34
2018-10-04T09:58:12.824Z,1538647092.824 [Default:CheckIn] Running Loop=34
2018-10-04T09:58:12.824Z,1538647092.824 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T09:58:12.824Z,1538647092.824 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T10:00:27.976Z,1538647227.976 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:00:27.976Z,1538647227.976 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-10-04T10:00:27.977Z,1538647227.977 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:00:27.978Z,1538647227.978 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:00:27.979Z,1538647227.979 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-04T10:00:27.979Z,1538647227.979 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:00:28.011Z,1538647228.011 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:00:28.011Z,1538647228.011 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:00:28.391Z,1538647228.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:00:28.391Z,1538647228.391 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-10-04T10:00:28.392Z,1538647228.392 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:00:28.392Z,1538647228.392 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-04T10:00:28.784Z,1538647228.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:00:28.789Z,1538647228.789 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:00:28.789Z,1538647228.789 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:00:28.790Z,1538647228.790 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:00:28.790Z,1538647228.790 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:00:28.791Z,1538647228.791 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:03:15.035Z,1538647395.035 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T09:58:12.8Z
2018-10-04T10:03:15.035Z,1538647395.035 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T10:03:15.035Z,1538647395.035 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T10:03:19.956Z,1538647399.956 [DataOverHttps](INFO): Sending 44 bytes from file Logs/20181004T041305/Courier0103.lzma
2018-10-04T10:03:20.808Z,1538647400.808 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0103.lzma.bak
2018-10-04T10:03:20.808Z,1538647400.808 [DataOverHttps](INFO): SBD MOMSN=8610753
2018-10-04T10:03:29.854Z,1538647409.854 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:03:29.854Z,1538647409.854 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-10-04T10:03:29.854Z,1538647409.854 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:03:29.856Z,1538647409.856 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:03:29.856Z,1538647409.856 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-04T10:03:29.856Z,1538647409.856 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:03:29.869Z,1538647409.869 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:03:29.869Z,1538647409.869 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:03:29.949Z,1538647409.949 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0104.lzma
2018-10-04T10:03:30.033Z,1538647410.033 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:03:30.033Z,1538647410.033 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-10-04T10:03:30.034Z,1538647410.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:03:30.034Z,1538647410.034 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-04T10:03:30.346Z,1538647410.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:03:30.346Z,1538647410.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:03:30.347Z,1538647410.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:03:30.347Z,1538647410.347 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:03:30.348Z,1538647410.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:03:30.348Z,1538647410.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:03:30.701Z,1538647410.701 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0104.lzma.bak
2018-10-04T10:03:30.705Z,1538647410.705 [DataOverHttps](INFO): SBD MOMSN=8610755
2018-10-04T10:03:31.631Z,1538647411.631 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T10:03:31.631Z,1538647411.631 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T10:03:31.631Z,1538647411.631 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T10:05:44.799Z,1538647544.799 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T10:05:44.799Z,1538647544.799 [NAL9602] Data Fault, FailCount= 2
2018-10-04T10:05:44.799Z,1538647544.799 [NAL9602](ERROR): Data Fault
2018-10-04T10:05:44.878Z,1538647544.878 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T10:05:45.199Z,1538647545.199 [NAL9602](INFO): Powering down
2018-10-04T10:05:46.063Z,1538647546.063 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T10:05:46.063Z,1538647546.063 [NAL9602] No Fault, FailCount= 2
2018-10-04T10:06:15.333Z,1538647575.333 [NAL9602](INFO): Powering up NAL9602
2018-10-04T10:06:26.515Z,1538647586.515 [NAL9602](INFO): NAL9602 initialized
2018-10-04T10:06:33.789Z,1538647593.789 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:06:33.789Z,1538647593.789 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-10-04T10:06:33.789Z,1538647593.789 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:06:33.791Z,1538647593.791 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:06:33.791Z,1538647593.791 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-04T10:06:33.791Z,1538647593.791 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:06:33.804Z,1538647593.804 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:06:33.805Z,1538647593.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:06:33.959Z,1538647593.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:06:33.959Z,1538647593.959 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-10-04T10:06:33.960Z,1538647593.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:06:33.960Z,1538647593.960 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-04T10:06:34.272Z,1538647594.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:06:34.273Z,1538647594.273 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:06:34.274Z,1538647594.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:06:34.274Z,1538647594.274 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:06:34.274Z,1538647594.274 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:06:34.275Z,1538647594.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:08:31.880Z,1538647711.880 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T10:08:31.890Z,1538647711.890 [Default:CheckIn:C.Wait] Stopped
2018-10-04T10:08:31.890Z,1538647711.890 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T10:08:31.890Z,1538647711.890 [Default:CheckIn:D] Running Loop=1
2018-10-04T10:08:32.285Z,1538647712.285 [Default:CheckIn:D] Stopped
2018-10-04T10:08:32.285Z,1538647712.285 [Default:CheckIn:E] Running Loop=1
2018-10-04T10:08:32.726Z,1538647712.726 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 352.075293 min 
2018-10-04T10:08:32.727Z,1538647712.727 [Default:CheckIn:E] Stopped
2018-10-04T10:08:32.727Z,1538647712.727 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T10:08:32.727Z,1538647712.727 [Default:CheckIn] Stopped
2018-10-04T10:08:32.727Z,1538647712.727 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T10:08:32.727Z,1538647712.727 [Default:CheckIn](INFO): Running loop #35
2018-10-04T10:08:32.727Z,1538647712.727 [Default:CheckIn] Running Loop=35
2018-10-04T10:08:32.727Z,1538647712.727 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T10:08:32.728Z,1538647712.728 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T10:09:34.465Z,1538647774.465 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:09:34.465Z,1538647774.465 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-10-04T10:09:34.465Z,1538647774.465 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:09:34.467Z,1538647774.467 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:09:34.467Z,1538647774.467 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-04T10:09:34.467Z,1538647774.467 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:09:34.501Z,1538647774.501 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:09:34.501Z,1538647774.501 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:09:34.858Z,1538647774.858 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:09:34.858Z,1538647774.858 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-10-04T10:09:34.858Z,1538647774.858 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:09:34.859Z,1538647774.859 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-04T10:09:35.242Z,1538647775.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:09:35.242Z,1538647775.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:09:35.243Z,1538647775.243 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:09:35.243Z,1538647775.243 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:09:35.243Z,1538647775.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:09:35.244Z,1538647775.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:12:35.373Z,1538647955.373 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:12:35.373Z,1538647955.373 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-10-04T10:12:35.373Z,1538647955.373 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:12:35.375Z,1538647955.375 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:12:35.375Z,1538647955.375 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-04T10:12:35.375Z,1538647955.375 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:12:35.397Z,1538647955.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:12:35.397Z,1538647955.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:12:35.766Z,1538647955.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:12:35.766Z,1538647955.766 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-10-04T10:12:35.767Z,1538647955.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:12:35.767Z,1538647955.767 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-04T10:12:36.138Z,1538647956.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:12:36.138Z,1538647956.138 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:12:36.139Z,1538647956.139 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:12:36.139Z,1538647956.139 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:12:36.139Z,1538647956.139 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:12:36.140Z,1538647956.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:13:35.482Z,1538648015.482 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T10:08:32.7Z
2018-10-04T10:13:35.482Z,1538648015.482 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T10:13:35.482Z,1538648015.482 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T10:13:40.405Z,1538648020.405 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0106.lzma
2018-10-04T10:13:41.180Z,1538648021.180 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0106.lzma.bak
2018-10-04T10:13:41.180Z,1538648021.180 [DataOverHttps](INFO): SBD MOMSN=8610759
2018-10-04T10:13:50.288Z,1538648030.288 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0107.lzma
2018-10-04T10:13:51.052Z,1538648031.052 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0107.lzma.bak
2018-10-04T10:13:51.052Z,1538648031.052 [DataOverHttps](INFO): SBD MOMSN=8610761
2018-10-04T10:13:51.991Z,1538648031.991 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T10:13:51.991Z,1538648031.991 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T10:13:51.991Z,1538648031.991 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T10:13:57.516Z,1538648037.516 [CBIT](IMPORTANT): Beginning ground fault scan
2018-10-04T10:14:06.889Z,1538648046.889 [CBIT](INFO): A/D timeout, 5 tries over 173 ms

2018-10-04T10:14:08.311Z,1538648048.311 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.127951
CHAN A1 (24V): 0.003133
CHAN A2 (12V): -0.007212
CHAN A3 (5V): -0.002195
CHAN B0 (3.3V): 0.000040
CHAN B1 (3.15aV): 0.000255
CHAN B2 (3.15bV): nan
CHAN B3 (GND): 0.025322
OPEN: 0.005009
Full Scale Calc: 4.765 mA, -1.589 mA
2018-10-04T10:15:36.435Z,1538648136.435 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:15:36.435Z,1538648136.435 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-10-04T10:15:36.435Z,1538648136.435 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:15:36.453Z,1538648136.453 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:15:36.453Z,1538648136.453 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-04T10:15:36.453Z,1538648136.453 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:15:36.479Z,1538648136.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:15:36.480Z,1538648136.480 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:15:36.854Z,1538648136.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:15:36.854Z,1538648136.854 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-10-04T10:15:36.854Z,1538648136.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:15:36.854Z,1538648136.854 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-04T10:15:37.230Z,1538648137.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:15:37.230Z,1538648137.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:15:37.231Z,1538648137.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:15:37.231Z,1538648137.231 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:15:37.231Z,1538648137.231 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:15:37.232Z,1538648137.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:16:27.803Z,1538648187.803 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T10:16:27.803Z,1538648187.803 [NAL9602] Data Fault, FailCount= 3
2018-10-04T10:16:27.803Z,1538648187.803 [NAL9602](ERROR): Data Fault
2018-10-04T10:16:27.896Z,1538648187.896 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T10:16:28.202Z,1538648188.202 [NAL9602](INFO): Powering down
2018-10-04T10:16:29.083Z,1538648189.083 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T10:16:29.083Z,1538648189.083 [NAL9602] No Fault, FailCount= 3
2018-10-04T10:16:58.283Z,1538648218.283 [NAL9602](INFO): Powering up NAL9602
2018-10-04T10:17:09.492Z,1538648229.492 [NAL9602](INFO): NAL9602 initialized
2018-10-04T10:18:37.772Z,1538648317.772 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:18:37.772Z,1538648317.772 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-10-04T10:18:37.772Z,1538648317.772 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:18:37.774Z,1538648317.774 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:18:37.774Z,1538648317.774 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-04T10:18:37.774Z,1538648317.774 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:18:37.788Z,1538648317.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:18:37.788Z,1538648317.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:18:37.921Z,1538648317.921 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:18:37.921Z,1538648317.921 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-10-04T10:18:37.922Z,1538648317.922 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:18:37.922Z,1538648317.922 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-04T10:18:38.254Z,1538648318.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:18:38.254Z,1538648318.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:18:38.255Z,1538648318.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:18:38.255Z,1538648318.255 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:18:38.256Z,1538648318.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:18:38.256Z,1538648318.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:18:52.257Z,1538648332.257 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T10:18:52.257Z,1538648332.257 [Default:CheckIn:C.Wait] Stopped
2018-10-04T10:18:52.257Z,1538648332.257 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T10:18:52.257Z,1538648332.257 [Default:CheckIn:D] Running Loop=1
2018-10-04T10:18:52.676Z,1538648332.676 [Default:CheckIn:D] Stopped
2018-10-04T10:18:52.676Z,1538648332.676 [Default:CheckIn:E] Running Loop=1
2018-10-04T10:18:53.066Z,1538648333.066 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 362.415137 min 
2018-10-04T10:18:53.066Z,1538648333.066 [Default:CheckIn:E] Stopped
2018-10-04T10:18:53.066Z,1538648333.066 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T10:18:53.066Z,1538648333.066 [Default:CheckIn] Stopped
2018-10-04T10:18:53.066Z,1538648333.066 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T10:18:53.066Z,1538648333.066 [Default:CheckIn](INFO): Running loop #36
2018-10-04T10:18:53.067Z,1538648333.067 [Default:CheckIn] Running Loop=36
2018-10-04T10:18:53.067Z,1538648333.067 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T10:18:53.067Z,1538648333.067 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T10:19:01.041Z,1538648341.041 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T10:19:01.041Z,1538648341.041 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100403235629,35.0, -00,1448.9,  0
2018-10-04T10:21:38.437Z,1538648498.437 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:21:38.437Z,1538648498.437 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-10-04T10:21:38.437Z,1538648498.437 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:21:38.439Z,1538648498.439 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:21:38.439Z,1538648498.439 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-04T10:21:38.439Z,1538648498.439 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:21:38.455Z,1538648498.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:21:38.456Z,1538648498.456 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:21:38.858Z,1538648498.858 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:21:38.858Z,1538648498.858 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-10-04T10:21:38.858Z,1538648498.858 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:21:38.858Z,1538648498.858 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-04T10:21:39.214Z,1538648499.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:21:39.214Z,1538648499.214 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:21:39.215Z,1538648499.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:21:39.215Z,1538648499.215 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:21:39.216Z,1538648499.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:21:39.216Z,1538648499.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:23:54.826Z,1538648634.826 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T10:18:53.1Z
2018-10-04T10:23:54.826Z,1538648634.826 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T10:23:54.826Z,1538648634.826 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T10:23:59.898Z,1538648639.898 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0109.lzma
2018-10-04T10:24:00.685Z,1538648640.685 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0109.lzma.bak
2018-10-04T10:24:00.685Z,1538648640.685 [DataOverHttps](INFO): SBD MOMSN=8610765
2018-10-04T10:24:09.902Z,1538648649.902 [DataOverHttps](INFO): Sending 327 bytes from file Logs/20181004T041305/Express0110.lzma
2018-10-04T10:24:10.685Z,1538648650.685 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0110.lzma.bak
2018-10-04T10:24:10.685Z,1538648650.685 [DataOverHttps](INFO): SBD MOMSN=8610767
2018-10-04T10:24:11.630Z,1538648651.630 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T10:24:11.630Z,1538648651.630 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T10:24:11.630Z,1538648651.630 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T10:24:39.476Z,1538648679.476 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:24:39.476Z,1538648679.476 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-10-04T10:24:39.476Z,1538648679.476 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:24:39.478Z,1538648679.478 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:24:39.478Z,1538648679.478 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-04T10:24:39.478Z,1538648679.478 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:24:39.503Z,1538648679.503 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:24:39.504Z,1538648679.504 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:24:39.927Z,1538648679.927 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:24:39.927Z,1538648679.927 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-10-04T10:24:39.927Z,1538648679.927 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:24:39.927Z,1538648679.927 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-04T10:24:40.290Z,1538648680.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:24:40.290Z,1538648680.290 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:24:40.291Z,1538648680.291 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:24:40.291Z,1538648680.291 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:24:40.291Z,1538648680.291 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:24:40.292Z,1538648680.292 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:27:11.909Z,1538648831.909 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T10:27:11.910Z,1538648831.910 [NAL9602] Data Fault, FailCount= 4
2018-10-04T10:27:11.910Z,1538648831.910 [NAL9602](ERROR): Data Fault
2018-10-04T10:27:11.969Z,1538648831.969 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T10:27:12.312Z,1538648832.312 [NAL9602](INFO): Powering down
2018-10-04T10:27:13.148Z,1538648833.148 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T10:27:13.149Z,1538648833.149 [NAL9602] No Fault, FailCount= 4
2018-10-04T10:27:40.331Z,1538648860.331 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:27:40.332Z,1538648860.332 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-10-04T10:27:40.332Z,1538648860.332 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:27:40.338Z,1538648860.338 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:27:40.338Z,1538648860.338 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-04T10:27:40.338Z,1538648860.338 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:27:40.363Z,1538648860.363 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:27:40.364Z,1538648860.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:27:40.769Z,1538648860.769 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:27:40.769Z,1538648860.769 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-10-04T10:27:40.770Z,1538648860.770 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:27:40.770Z,1538648860.770 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-04T10:27:41.130Z,1538648861.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:27:41.131Z,1538648861.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:27:41.131Z,1538648861.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:27:41.132Z,1538648861.132 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:27:41.132Z,1538648861.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:27:41.132Z,1538648861.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:27:42.691Z,1538648862.691 [NAL9602](INFO): Powering up NAL9602
2018-10-04T10:27:53.731Z,1538648873.731 [NAL9602](INFO): NAL9602 initialized
2018-10-04T10:29:11.961Z,1538648951.961 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T10:29:11.961Z,1538648951.961 [Default:CheckIn:C.Wait] Stopped
2018-10-04T10:29:11.961Z,1538648951.961 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T10:29:11.961Z,1538648951.961 [Default:CheckIn:D] Running Loop=1
2018-10-04T10:29:12.393Z,1538648952.393 [Default:CheckIn:D] Stopped
2018-10-04T10:29:12.393Z,1538648952.393 [Default:CheckIn:E] Running Loop=1
2018-10-04T10:29:12.749Z,1538648952.749 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 372.743750 min 
2018-10-04T10:29:12.749Z,1538648952.749 [Default:CheckIn:E] Stopped
2018-10-04T10:29:12.750Z,1538648952.750 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T10:29:12.750Z,1538648952.750 [Default:CheckIn] Stopped
2018-10-04T10:29:12.750Z,1538648952.750 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T10:29:12.750Z,1538648952.750 [Default:CheckIn](INFO): Running loop #37
2018-10-04T10:29:12.750Z,1538648952.750 [Default:CheckIn] Running Loop=37
2018-10-04T10:29:12.750Z,1538648952.750 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T10:29:12.750Z,1538648952.750 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T10:30:42.998Z,1538649042.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:30:42.998Z,1538649042.998 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-10-04T10:30:42.998Z,1538649042.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:30:42.000Z,1538649043.000 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:30:42.000Z,1538649043.000 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-04T10:30:42.000Z,1538649043.000 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:30:43.059Z,1538649043.059 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:30:43.059Z,1538649043.059 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:30:43.162Z,1538649043.162 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:30:43.162Z,1538649043.162 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-10-04T10:30:43.163Z,1538649043.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:30:43.163Z,1538649043.163 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-04T10:30:43.544Z,1538649043.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:30:43.544Z,1538649043.544 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:30:43.545Z,1538649043.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:30:43.545Z,1538649043.545 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:30:43.546Z,1538649043.546 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:30:43.546Z,1538649043.546 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:33:43.763Z,1538649223.763 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:33:43.763Z,1538649223.763 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-10-04T10:33:43.763Z,1538649223.763 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:33:43.769Z,1538649223.769 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:33:43.769Z,1538649223.769 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-10-04T10:33:43.770Z,1538649223.770 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:33:43.807Z,1538649223.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:33:43.807Z,1538649223.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:33:44.186Z,1538649224.186 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:33:44.186Z,1538649224.186 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-10-04T10:33:44.187Z,1538649224.187 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:33:44.187Z,1538649224.187 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-10-04T10:33:44.578Z,1538649224.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:33:44.578Z,1538649224.578 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:33:44.579Z,1538649224.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:33:44.579Z,1538649224.579 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:33:44.579Z,1538649224.579 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:33:44.580Z,1538649224.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:34:14.590Z,1538649254.590 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T10:29:12.8Z
2018-10-04T10:34:14.590Z,1538649254.590 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T10:34:14.590Z,1538649254.590 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T10:34:19.511Z,1538649259.511 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0112.lzma
2018-10-04T10:34:20.285Z,1538649260.285 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0112.lzma.bak
2018-10-04T10:34:20.285Z,1538649260.285 [DataOverHttps](INFO): SBD MOMSN=8610773
2018-10-04T10:34:29.430Z,1538649269.430 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0113.lzma
2018-10-04T10:34:30.192Z,1538649270.192 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0113.lzma.bak
2018-10-04T10:34:30.193Z,1538649270.193 [DataOverHttps](INFO): SBD MOMSN=8610775
2018-10-04T10:34:31.144Z,1538649271.144 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T10:34:31.144Z,1538649271.144 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T10:34:31.144Z,1538649271.144 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T10:36:24.654Z,1538649384.654 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T10:36:44.686Z,1538649404.686 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:36:44.687Z,1538649404.687 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-10-04T10:36:44.687Z,1538649404.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:36:44.689Z,1538649404.689 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:36:44.693Z,1538649404.693 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-10-04T10:36:44.693Z,1538649404.693 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:36:44.718Z,1538649404.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:36:44.719Z,1538649404.719 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:36:45.090Z,1538649405.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:36:45.090Z,1538649405.090 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-10-04T10:36:45.091Z,1538649405.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:36:45.091Z,1538649405.091 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-10-04T10:36:45.502Z,1538649405.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:36:45.502Z,1538649405.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:36:45.503Z,1538649405.503 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:36:45.503Z,1538649405.503 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:36:45.503Z,1538649405.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:36:45.504Z,1538649405.504 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:37:54.819Z,1538649474.819 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T10:37:54.819Z,1538649474.819 [NAL9602] Data Fault, FailCount= 5
2018-10-04T10:37:54.819Z,1538649474.819 [NAL9602](ERROR): Data Fault
2018-10-04T10:37:54.888Z,1538649474.888 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T10:37:54.889Z,1538649474.889 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T10:37:55.219Z,1538649475.219 [NAL9602](INFO): Powering down
2018-10-04T10:37:55.321Z,1538649475.321 [CBIT](INFO): Critical error at 20181004T103754
2018-10-04T10:39:31.498Z,1538649571.498 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T10:39:31.499Z,1538649571.499 [Default:CheckIn:C.Wait] Stopped
2018-10-04T10:39:31.499Z,1538649571.499 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T10:39:31.499Z,1538649571.499 [Default:CheckIn:D] Running Loop=1
2018-10-04T10:39:31.897Z,1538649571.897 [Default:CheckIn:D] Stopped
2018-10-04T10:39:31.897Z,1538649571.897 [Default:CheckIn:E] Running Loop=1
2018-10-04T10:39:32.318Z,1538649572.318 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 383.068815 min 
2018-10-04T10:39:32.319Z,1538649572.319 [Default:CheckIn:E] Stopped
2018-10-04T10:39:32.319Z,1538649572.319 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T10:39:32.319Z,1538649572.319 [Default:CheckIn] Stopped
2018-10-04T10:39:32.319Z,1538649572.319 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T10:39:32.319Z,1538649572.319 [Default:CheckIn](INFO): Running loop #38
2018-10-04T10:39:32.319Z,1538649572.319 [Default:CheckIn] Running Loop=38
2018-10-04T10:39:32.319Z,1538649572.319 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T10:39:32.320Z,1538649572.320 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T10:39:45.512Z,1538649585.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:39:45.512Z,1538649585.512 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-10-04T10:39:45.512Z,1538649585.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:39:45.514Z,1538649585.514 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:39:45.514Z,1538649585.514 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-10-04T10:39:45.515Z,1538649585.515 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:39:45.552Z,1538649585.552 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:39:45.552Z,1538649585.552 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:39:45.914Z,1538649585.914 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:39:45.914Z,1538649585.914 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-10-04T10:39:45.915Z,1538649585.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:39:45.915Z,1538649585.915 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-10-04T10:39:46.314Z,1538649586.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:39:46.315Z,1538649586.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:39:46.315Z,1538649586.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:39:46.316Z,1538649586.316 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:39:46.321Z,1538649586.321 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:39:46.322Z,1538649586.322 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:39:53.591Z,1538649593.591 [RDI_Pathfinder](ERROR): Failed to parse:
:SA,   +0.00,   +0.00,  0.00
2018-10-04T10:39:54.840Z,1538649594.840 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T10:39:54.840Z,1538649594.840 [NAL9602] No Fault, FailCount= 5
2018-10-04T10:39:55.175Z,1538649595.175 [NAL9602](INFO): Powering up NAL9602
2018-10-04T10:40:05.979Z,1538649605.979 [NAL9602](INFO): NAL9602 initialized
2018-10-04T10:42:48.883Z,1538649768.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:42:48.883Z,1538649768.883 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-10-04T10:42:48.883Z,1538649768.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:42:48.913Z,1538649768.913 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:42:48.913Z,1538649768.913 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-10-04T10:42:48.913Z,1538649768.913 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:42:48.948Z,1538649768.948 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:42:48.949Z,1538649768.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:42:49.069Z,1538649769.069 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:42:49.069Z,1538649769.069 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-10-04T10:42:49.069Z,1538649769.069 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:42:49.069Z,1538649769.069 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-10-04T10:42:49.434Z,1538649769.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:42:49.434Z,1538649769.434 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:42:49.435Z,1538649769.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:42:49.435Z,1538649769.435 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:42:49.435Z,1538649769.435 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:42:49.436Z,1538649769.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:43:25.571Z,1538649805.571 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T10:44:34.959Z,1538649874.959 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T10:39:32.3Z
2018-10-04T10:44:34.960Z,1538649874.960 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T10:44:34.960Z,1538649874.960 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T10:44:39.922Z,1538649879.922 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0115.lzma
2018-10-04T10:44:40.705Z,1538649880.705 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0115.lzma.bak
2018-10-04T10:44:40.705Z,1538649880.705 [DataOverHttps](INFO): SBD MOMSN=8610779
2018-10-04T10:44:49.891Z,1538649889.891 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0116.lzma
2018-10-04T10:44:50.676Z,1538649890.676 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0116.lzma.bak
2018-10-04T10:44:50.677Z,1538649890.677 [DataOverHttps](INFO): SBD MOMSN=8610782
2018-10-04T10:44:51.611Z,1538649891.611 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T10:44:51.611Z,1538649891.611 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T10:44:51.611Z,1538649891.611 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T10:45:49.469Z,1538649949.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:45:49.469Z,1538649949.469 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-10-04T10:45:49.469Z,1538649949.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:45:49.471Z,1538649949.471 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:45:49.471Z,1538649949.471 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-10-04T10:45:49.472Z,1538649949.472 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:45:49.484Z,1538649949.484 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:45:49.485Z,1538649949.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:45:49.898Z,1538649949.898 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:45:49.898Z,1538649949.898 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-10-04T10:45:49.899Z,1538649949.899 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:45:49.899Z,1538649949.899 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-10-04T10:45:50.252Z,1538649950.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:45:50.252Z,1538649950.252 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:45:50.265Z,1538649950.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:45:50.265Z,1538649950.265 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:45:50.266Z,1538649950.266 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:45:50.266Z,1538649950.266 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:48:50.427Z,1538650130.427 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:48:50.427Z,1538650130.427 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-10-04T10:48:50.427Z,1538650130.427 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:48:50.433Z,1538650130.433 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:48:50.433Z,1538650130.433 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-10-04T10:48:50.433Z,1538650130.433 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:48:50.455Z,1538650130.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:48:50.455Z,1538650130.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:48:50.862Z,1538650130.862 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:48:50.862Z,1538650130.862 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-10-04T10:48:50.863Z,1538650130.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:48:50.863Z,1538650130.863 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-10-04T10:48:51.214Z,1538650131.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:48:51.214Z,1538650131.214 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:48:51.215Z,1538650131.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:48:51.215Z,1538650131.215 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:48:51.216Z,1538650131.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:48:51.216Z,1538650131.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:49:51.835Z,1538650191.835 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T10:49:51.835Z,1538650191.835 [Default:CheckIn:C.Wait] Stopped
2018-10-04T10:49:51.835Z,1538650191.835 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T10:49:51.835Z,1538650191.835 [Default:CheckIn:D] Running Loop=1
2018-10-04T10:49:52.233Z,1538650192.233 [Default:CheckIn:D] Stopped
2018-10-04T10:49:52.233Z,1538650192.233 [Default:CheckIn:E] Running Loop=1
2018-10-04T10:49:52.646Z,1538650192.646 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 393.407747 min 
2018-10-04T10:49:52.647Z,1538650192.647 [Default:CheckIn:E] Stopped
2018-10-04T10:49:52.647Z,1538650192.647 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T10:49:52.647Z,1538650192.647 [Default:CheckIn] Stopped
2018-10-04T10:49:52.647Z,1538650192.647 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T10:49:52.647Z,1538650192.647 [Default:CheckIn](INFO): Running loop #39
2018-10-04T10:49:52.647Z,1538650192.647 [Default:CheckIn] Running Loop=39
2018-10-04T10:49:52.648Z,1538650192.648 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T10:49:52.648Z,1538650192.648 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T10:50:06.991Z,1538650206.991 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T10:50:06.991Z,1538650206.991 [NAL9602] Data Fault, FailCount= 1
2018-10-04T10:50:06.991Z,1538650206.991 [NAL9602](ERROR): Data Fault
2018-10-04T10:50:07.048Z,1538650207.048 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T10:50:07.391Z,1538650207.391 [NAL9602](INFO): Powering down
2018-10-04T10:50:08.252Z,1538650208.252 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T10:50:08.253Z,1538650208.253 [NAL9602] No Fault, FailCount= 1
2018-10-04T10:50:37.459Z,1538650237.459 [NAL9602](INFO): Powering up NAL9602
2018-10-04T10:50:48.755Z,1538650248.755 [NAL9602](INFO): NAL9602 initialized
2018-10-04T10:51:51.479Z,1538650311.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:51:51.479Z,1538650311.479 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-10-04T10:51:51.479Z,1538650311.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:51:51.481Z,1538650311.481 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:51:51.481Z,1538650311.481 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-10-04T10:51:51.481Z,1538650311.481 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:51:51.510Z,1538650311.510 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:51:51.511Z,1538650311.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:51:51.886Z,1538650311.886 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:51:51.886Z,1538650311.886 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-10-04T10:51:51.887Z,1538650311.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:51:51.887Z,1538650311.887 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-10-04T10:51:52.292Z,1538650312.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:51:52.292Z,1538650312.292 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:51:52.293Z,1538650312.293 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:51:52.293Z,1538650312.293 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:51:52.293Z,1538650312.293 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:51:52.294Z,1538650312.294 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:52:48.557Z,1538650368.557 [RDI_Pathfinder](ERROR): Failed to parse:
:H8c,0ffd, 15.887, -0.008, 0.000
2018-10-04T10:53:11.003Z,1538650391.003 [RDI_Pathfinder](ERROR): only read 4 of 5 data items
2018-10-04T10:53:11.003Z,1538650391.003 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-327S,-32768,-32768,-32768,V
2018-10-04T10:54:55.187Z,1538650495.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:54:55.187Z,1538650495.187 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-10-04T10:54:55.187Z,1538650495.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:54:55.209Z,1538650495.209 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:54:55.209Z,1538650495.209 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-10-04T10:54:55.209Z,1538650495.209 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:54:55.212Z,1538650495.212 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T10:49:52.6Z
2018-10-04T10:54:55.212Z,1538650495.212 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T10:54:55.212Z,1538650495.212 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T10:54:55.261Z,1538650495.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:54:55.262Z,1538650495.262 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:54:55.406Z,1538650495.406 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:54:55.406Z,1538650495.406 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-10-04T10:54:55.406Z,1538650495.406 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:54:55.406Z,1538650495.406 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-10-04T10:54:55.985Z,1538650495.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:54:55.985Z,1538650495.985 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:54:55.986Z,1538650495.986 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:54:55.986Z,1538650495.986 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:54:55.986Z,1538650495.986 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:54:55.987Z,1538650495.987 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:55:00.197Z,1538650500.197 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0118.lzma
2018-10-04T10:55:00.972Z,1538650500.972 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0118.lzma.bak
2018-10-04T10:55:00.972Z,1538650500.972 [DataOverHttps](INFO): SBD MOMSN=8610786
2018-10-04T10:55:10.137Z,1538650510.137 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0119.lzma
2018-10-04T10:55:10.924Z,1538650510.924 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0119.lzma.bak
2018-10-04T10:55:10.924Z,1538650510.924 [DataOverHttps](INFO): SBD MOMSN=8610788
2018-10-04T10:55:11.849Z,1538650511.849 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T10:55:11.849Z,1538650511.849 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T10:55:11.849Z,1538650511.849 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T10:55:30.036Z,1538650530.036 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.873,*-0.007,*0.000
2018-10-04T10:57:02.575Z,1538650622.575 [RDI_Pathfinder](ERROR): Failed to parse:
:BE,-32768,-32768,-32768,V
2018-10-04T10:57:56.305Z,1538650676.305 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:57:56.305Z,1538650676.305 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-10-04T10:57:56.305Z,1538650676.305 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T10:57:56.307Z,1538650676.307 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T10:57:56.307Z,1538650676.307 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-10-04T10:57:56.308Z,1538650676.308 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T10:57:56.340Z,1538650676.340 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T10:57:56.340Z,1538650676.340 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T10:57:56.730Z,1538650676.730 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T10:57:56.730Z,1538650676.730 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-10-04T10:57:56.730Z,1538650676.730 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T10:57:56.730Z,1538650676.730 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-10-04T10:57:57.086Z,1538650677.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T10:57:57.086Z,1538650677.086 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:57:57.087Z,1538650677.087 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T10:57:57.087Z,1538650677.087 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T10:57:57.087Z,1538650677.087 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T10:57:57.088Z,1538650677.088 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:00:12.083Z,1538650812.083 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T11:00:12.083Z,1538650812.083 [Default:CheckIn:C.Wait] Stopped
2018-10-04T11:00:12.083Z,1538650812.083 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T11:00:12.083Z,1538650812.083 [Default:CheckIn:D] Running Loop=1
2018-10-04T11:00:12.487Z,1538650812.487 [Default:CheckIn:D] Stopped
2018-10-04T11:00:12.487Z,1538650812.487 [Default:CheckIn:E] Running Loop=1
2018-10-04T11:00:12.853Z,1538650812.853 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 403.745313 min 
2018-10-04T11:00:12.857Z,1538650812.857 [Default:CheckIn:E] Stopped
2018-10-04T11:00:12.857Z,1538650812.857 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T11:00:12.857Z,1538650812.857 [Default:CheckIn] Stopped
2018-10-04T11:00:12.857Z,1538650812.857 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T11:00:12.858Z,1538650812.858 [Default:CheckIn](INFO): Running loop #40
2018-10-04T11:00:12.858Z,1538650812.858 [Default:CheckIn] Running Loop=40
2018-10-04T11:00:12.858Z,1538650812.858 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T11:00:12.858Z,1538650812.858 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T11:00:49.715Z,1538650849.715 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T11:00:49.715Z,1538650849.715 [NAL9602] Data Fault, FailCount= 2
2018-10-04T11:00:49.715Z,1538650849.715 [NAL9602](ERROR): Data Fault
2018-10-04T11:00:49.794Z,1538650849.794 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T11:00:50.119Z,1538650850.119 [NAL9602](INFO): Powering down
2018-10-04T11:00:51.055Z,1538650851.055 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T11:00:51.055Z,1538650851.055 [NAL9602] No Fault, FailCount= 2
2018-10-04T11:00:57.389Z,1538650857.389 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:00:57.389Z,1538650857.389 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-10-04T11:00:57.390Z,1538650857.390 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:00:57.394Z,1538650857.394 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:00:57.394Z,1538650857.394 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-10-04T11:00:57.394Z,1538650857.394 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:00:57.416Z,1538650857.416 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:00:57.416Z,1538650857.416 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:00:57.761Z,1538650857.761 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:00:57.761Z,1538650857.761 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-10-04T11:00:57.762Z,1538650857.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:00:57.762Z,1538650857.762 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-10-04T11:00:58.154Z,1538650858.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:00:58.154Z,1538650858.154 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:00:58.155Z,1538650858.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:00:58.155Z,1538650858.155 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:00:58.155Z,1538650858.155 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:00:58.156Z,1538650858.156 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:01:20.267Z,1538650880.267 [NAL9602](INFO): Powering up NAL9602
2018-10-04T11:01:31.463Z,1538650891.463 [NAL9602](INFO): NAL9602 initialized
2018-10-04T11:03:33.633Z,1538651013.633 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T11:03:33.633Z,1538651013.633 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100404082929,35.0, -0.1, 48.9,  0
2018-10-04T11:03:58.459Z,1538651038.459 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:03:58.459Z,1538651038.459 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-10-04T11:03:58.459Z,1538651038.459 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:03:58.461Z,1538651038.461 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:03:58.461Z,1538651038.461 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-10-04T11:03:58.462Z,1538651038.462 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:03:58.475Z,1538651038.475 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:03:58.475Z,1538651038.475 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:03:58.834Z,1538651038.834 [RDI_Pathfinder](ERROR): Failed to parse:
:   +0.00,        +0.00,        +0.00,   0.00,24600.25
2018-10-04T11:03:58.854Z,1538651038.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:03:58.854Z,1538651038.854 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-10-04T11:03:58.855Z,1538651038.855 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:03:58.855Z,1538651038.855 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-10-04T11:03:59.250Z,1538651039.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:03:59.250Z,1538651039.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:03:59.251Z,1538651039.251 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:03:59.251Z,1538651039.251 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:03:59.251Z,1538651039.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:03:59.252Z,1538651039.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:04:29.888Z,1538651069.888 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T11:05:14.830Z,1538651114.830 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T11:00:12.9Z
2018-10-04T11:05:14.830Z,1538651114.830 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T11:05:14.830Z,1538651114.830 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T11:05:19.792Z,1538651119.792 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0121.lzma
2018-10-04T11:05:20.571Z,1538651120.571 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0121.lzma.bak
2018-10-04T11:05:20.571Z,1538651120.571 [DataOverHttps](INFO): SBD MOMSN=8610792
2018-10-04T11:05:29.797Z,1538651129.797 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0122.lzma
2018-10-04T11:05:30.556Z,1538651130.556 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0122.lzma.bak
2018-10-04T11:05:30.556Z,1538651130.556 [DataOverHttps](INFO): SBD MOMSN=8610794
2018-10-04T11:05:31.507Z,1538651131.507 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T11:05:31.507Z,1538651131.507 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T11:05:31.507Z,1538651131.507 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T11:06:59.569Z,1538651219.569 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:06:59.569Z,1538651219.569 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-10-04T11:06:59.569Z,1538651219.569 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:06:59.571Z,1538651219.571 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:06:59.571Z,1538651219.571 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-10-04T11:06:59.571Z,1538651219.571 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:06:59.621Z,1538651219.621 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:06:59.621Z,1538651219.621 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:07:00.008Z,1538651220.008 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:07:00.008Z,1538651220.008 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-10-04T11:07:00.008Z,1538651220.008 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:07:00.008Z,1538651220.008 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-10-04T11:07:00.386Z,1538651220.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:07:00.386Z,1538651220.386 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:07:00.387Z,1538651220.387 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:07:00.387Z,1538651220.387 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:07:00.387Z,1538651220.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:07:00.388Z,1538651220.388 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:10:00.487Z,1538651400.487 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:10:00.487Z,1538651400.487 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-10-04T11:10:00.487Z,1538651400.487 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:10:00.489Z,1538651400.489 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:10:00.490Z,1538651400.490 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-10-04T11:10:00.490Z,1538651400.490 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:10:00.503Z,1538651400.503 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:10:00.503Z,1538651400.503 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:10:00.895Z,1538651400.895 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:10:00.895Z,1538651400.895 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-10-04T11:10:00.896Z,1538651400.896 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:10:00.896Z,1538651400.896 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-10-04T11:10:01.311Z,1538651401.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:10:01.311Z,1538651401.311 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:10:01.312Z,1538651401.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:10:01.312Z,1538651401.312 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:10:01.313Z,1538651401.313 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:10:01.317Z,1538651401.317 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:10:31.766Z,1538651431.766 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T11:10:31.766Z,1538651431.766 [Default:CheckIn:C.Wait] Stopped
2018-10-04T11:10:31.766Z,1538651431.766 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T11:10:31.766Z,1538651431.766 [Default:CheckIn:D] Running Loop=1
2018-10-04T11:10:32.168Z,1538651432.168 [Default:CheckIn:D] Stopped
2018-10-04T11:10:32.168Z,1538651432.168 [Default:CheckIn:E] Running Loop=1
2018-10-04T11:10:32.587Z,1538651432.587 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 414.073340 min 
2018-10-04T11:10:32.587Z,1538651432.587 [Default:CheckIn:E] Stopped
2018-10-04T11:10:32.587Z,1538651432.587 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T11:10:32.587Z,1538651432.587 [Default:CheckIn] Stopped
2018-10-04T11:10:32.587Z,1538651432.587 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T11:10:32.587Z,1538651432.587 [Default:CheckIn](INFO): Running loop #41
2018-10-04T11:10:32.588Z,1538651432.588 [Default:CheckIn] Running Loop=41
2018-10-04T11:10:32.588Z,1538651432.588 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T11:10:32.588Z,1538651432.588 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T11:11:32.599Z,1538651492.599 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T11:11:32.599Z,1538651492.599 [NAL9602] Data Fault, FailCount= 3
2018-10-04T11:11:32.599Z,1538651492.599 [NAL9602](ERROR): Data Fault
2018-10-04T11:11:32.719Z,1538651492.719 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T11:11:32.998Z,1538651492.998 [NAL9602](INFO): Powering down
2018-10-04T11:11:33.889Z,1538651493.889 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T11:11:33.889Z,1538651493.889 [NAL9602] No Fault, FailCount= 3
2018-10-04T11:12:03.025Z,1538651523.025 [NAL9602](INFO): Powering up NAL9602
2018-10-04T11:12:14.172Z,1538651534.172 [NAL9602](INFO): NAL9602 initialized
2018-10-04T11:13:01.490Z,1538651581.490 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:13:01.490Z,1538651581.490 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-10-04T11:13:01.490Z,1538651581.490 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:13:01.492Z,1538651581.492 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:13:01.492Z,1538651581.492 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-10-04T11:13:01.492Z,1538651581.492 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:13:01.517Z,1538651581.517 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:13:01.518Z,1538651581.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:13:01.924Z,1538651581.924 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:13:01.925Z,1538651581.925 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-10-04T11:13:01.930Z,1538651581.930 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:13:01.930Z,1538651581.930 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-10-04T11:13:02.311Z,1538651582.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:13:02.311Z,1538651582.311 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:13:02.311Z,1538651582.311 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:13:02.312Z,1538651582.312 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:13:02.312Z,1538651582.312 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:13:02.317Z,1538651582.317 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:15:32.817Z,1538651732.817 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T11:10:32.6Z
2018-10-04T11:15:32.817Z,1538651732.817 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T11:15:32.817Z,1538651732.817 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T11:15:36.553Z,1538651736.553 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0124.lzma
2018-10-04T11:15:37.096Z,1538651737.096 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0124.lzma.bak
2018-10-04T11:15:37.096Z,1538651737.096 [DataOverHttps](INFO): SBD MOMSN=8610798
2018-10-04T11:15:46.325Z,1538651746.325 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0125.lzma
2018-10-04T11:15:47.113Z,1538651747.113 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0125.lzma.bak
2018-10-04T11:15:47.114Z,1538651747.114 [DataOverHttps](INFO): SBD MOMSN=8610800
2018-10-04T11:15:48.023Z,1538651748.023 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T11:15:48.038Z,1538651748.038 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T11:15:48.038Z,1538651748.038 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T11:15:48.040Z,1538651748.040 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T11:16:02.626Z,1538651762.626 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:16:02.626Z,1538651762.626 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-10-04T11:16:02.626Z,1538651762.626 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:16:02.628Z,1538651762.628 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:16:02.628Z,1538651762.628 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-10-04T11:16:02.629Z,1538651762.629 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:16:02.657Z,1538651762.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:16:02.658Z,1538651762.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:16:03.035Z,1538651763.035 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:16:03.035Z,1538651763.035 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-10-04T11:16:03.036Z,1538651763.036 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:16:03.036Z,1538651763.036 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-10-04T11:16:03.427Z,1538651763.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:16:03.427Z,1538651763.427 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:16:03.428Z,1538651763.428 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:16:03.428Z,1538651763.428 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:16:03.433Z,1538651763.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:16:03.433Z,1538651763.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:19:03.667Z,1538651943.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:19:03.667Z,1538651943.667 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-10-04T11:19:03.667Z,1538651943.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:19:03.673Z,1538651943.673 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:19:03.673Z,1538651943.673 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-10-04T11:19:03.673Z,1538651943.673 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:19:03.695Z,1538651943.695 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:19:03.695Z,1538651943.695 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:19:04.091Z,1538651944.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:19:04.091Z,1538651944.091 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-10-04T11:19:04.091Z,1538651944.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:19:04.091Z,1538651944.091 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-10-04T11:19:04.477Z,1538651944.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:19:04.478Z,1538651944.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:19:04.478Z,1538651944.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:19:04.479Z,1538651944.479 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:19:04.479Z,1538651944.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:19:04.479Z,1538651944.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:20:48.479Z,1538652048.479 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T11:20:48.480Z,1538652048.480 [Default:CheckIn:C.Wait] Stopped
2018-10-04T11:20:48.480Z,1538652048.480 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T11:20:48.480Z,1538652048.480 [Default:CheckIn:D] Running Loop=1
2018-10-04T11:20:48.849Z,1538652048.849 [Default:CheckIn:D] Stopped
2018-10-04T11:20:48.849Z,1538652048.849 [Default:CheckIn:E] Running Loop=1
2018-10-04T11:20:49.261Z,1538652049.261 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 424.351270 min 
2018-10-04T11:20:49.262Z,1538652049.262 [Default:CheckIn:E] Stopped
2018-10-04T11:20:49.262Z,1538652049.262 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T11:20:49.262Z,1538652049.262 [Default:CheckIn] Stopped
2018-10-04T11:20:49.262Z,1538652049.262 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T11:20:49.262Z,1538652049.262 [Default:CheckIn](INFO): Running loop #42
2018-10-04T11:20:49.262Z,1538652049.262 [Default:CheckIn] Running Loop=42
2018-10-04T11:20:49.262Z,1538652049.262 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T11:20:49.263Z,1538652049.263 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T11:22:04.785Z,1538652124.785 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:22:04.785Z,1538652124.785 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-10-04T11:22:04.785Z,1538652124.785 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:22:04.787Z,1538652124.787 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:22:04.787Z,1538652124.787 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-10-04T11:22:04.787Z,1538652124.787 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:22:04.800Z,1538652124.800 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:22:04.800Z,1538652124.800 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:22:05.228Z,1538652125.228 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:22:05.233Z,1538652125.233 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-10-04T11:22:05.234Z,1538652125.234 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:22:05.234Z,1538652125.234 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-10-04T11:22:05.607Z,1538652125.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:22:05.608Z,1538652125.608 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:22:05.608Z,1538652125.608 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:22:05.608Z,1538652125.608 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:22:05.613Z,1538652125.613 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:22:05.613Z,1538652125.613 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:22:19.655Z,1538652139.655 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T11:22:19.655Z,1538652139.655 [NAL9602] Data Fault, FailCount= 4
2018-10-04T11:22:19.655Z,1538652139.655 [NAL9602](ERROR): Data Fault
2018-10-04T11:22:19.705Z,1538652139.705 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T11:22:20.003Z,1538652140.003 [NAL9602](INFO): Powering down
2018-10-04T11:22:20.877Z,1538652140.877 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T11:22:20.878Z,1538652140.878 [NAL9602] No Fault, FailCount= 4
2018-10-04T11:22:50.395Z,1538652170.395 [NAL9602](INFO): Powering up NAL9602
2018-10-04T11:23:01.275Z,1538652181.275 [NAL9602](INFO): NAL9602 initialized
2018-10-04T11:25:05.611Z,1538652305.611 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:25:05.612Z,1538652305.612 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-10-04T11:25:05.612Z,1538652305.612 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:25:05.614Z,1538652305.614 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:25:05.614Z,1538652305.614 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-10-04T11:25:05.614Z,1538652305.614 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:25:05.639Z,1538652305.639 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:25:05.639Z,1538652305.639 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:25:06.007Z,1538652306.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:25:06.007Z,1538652306.007 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-10-04T11:25:06.007Z,1538652306.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:25:06.007Z,1538652306.007 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-10-04T11:25:06.399Z,1538652306.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:25:06.400Z,1538652306.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:25:06.400Z,1538652306.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:25:06.401Z,1538652306.401 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:25:06.401Z,1538652306.401 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:25:06.402Z,1538652306.402 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:25:51.334Z,1538652351.334 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T11:20:49.3Z
2018-10-04T11:25:51.334Z,1538652351.334 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T11:25:51.334Z,1538652351.334 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T11:25:56.270Z,1538652356.270 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0127.lzma
2018-10-04T11:25:57.028Z,1538652357.028 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0127.lzma.bak
2018-10-04T11:25:57.028Z,1538652357.028 [DataOverHttps](INFO): SBD MOMSN=8610804
2018-10-04T11:26:02.540Z,1538652362.540 [RDI_Pathfinder](ERROR): Failed to parse:
:BE,-32768,-32768,-32768,V
2018-10-04T11:26:06.189Z,1538652366.189 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0128.lzma
2018-10-04T11:26:06.972Z,1538652366.972 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0128.lzma.bak
2018-10-04T11:26:06.972Z,1538652366.972 [DataOverHttps](INFO): SBD MOMSN=8610806
2018-10-04T11:26:07.910Z,1538652367.910 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T11:26:07.910Z,1538652367.910 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T11:26:07.910Z,1538652367.910 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T11:28:06.682Z,1538652486.682 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:28:06.682Z,1538652486.682 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-10-04T11:28:06.683Z,1538652486.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:28:06.684Z,1538652486.684 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:28:06.684Z,1538652486.684 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-10-04T11:28:06.685Z,1538652486.685 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:28:06.714Z,1538652486.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:28:06.715Z,1538652486.715 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:28:07.088Z,1538652487.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:28:07.088Z,1538652487.088 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-10-04T11:28:07.088Z,1538652487.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:28:07.088Z,1538652487.088 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-10-04T11:28:07.489Z,1538652487.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:28:07.490Z,1538652487.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:28:07.490Z,1538652487.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:28:07.491Z,1538652487.491 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:28:07.491Z,1538652487.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:28:07.491Z,1538652487.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:31:07.558Z,1538652667.558 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:31:07.558Z,1538652667.558 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-10-04T11:31:07.558Z,1538652667.558 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:31:07.560Z,1538652667.560 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:31:07.560Z,1538652667.560 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-10-04T11:31:07.560Z,1538652667.560 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:31:07.601Z,1538652667.601 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:31:07.602Z,1538652667.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:31:07.968Z,1538652667.968 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:31:07.968Z,1538652667.968 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-10-04T11:31:07.973Z,1538652667.973 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:31:07.973Z,1538652667.973 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-10-04T11:31:08.349Z,1538652668.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:31:08.349Z,1538652668.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:31:08.350Z,1538652668.350 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:31:08.350Z,1538652668.350 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:31:08.351Z,1538652668.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:31:08.351Z,1538652668.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:31:08.352Z,1538652668.352 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T11:31:08.353Z,1538652668.353 [Default:CheckIn:C.Wait] Stopped
2018-10-04T11:31:08.353Z,1538652668.353 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T11:31:08.353Z,1538652668.353 [Default:CheckIn:D] Running Loop=1
2018-10-04T11:31:08.741Z,1538652668.741 [Default:CheckIn:D] Stopped
2018-10-04T11:31:08.741Z,1538652668.741 [Default:CheckIn:E] Running Loop=1
2018-10-04T11:31:09.130Z,1538652669.130 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 434.682813 min 
2018-10-04T11:31:09.130Z,1538652669.130 [Default:CheckIn:E] Stopped
2018-10-04T11:31:09.130Z,1538652669.130 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T11:31:09.130Z,1538652669.130 [Default:CheckIn] Stopped
2018-10-04T11:31:09.130Z,1538652669.130 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T11:31:09.131Z,1538652669.131 [Default:CheckIn](INFO): Running loop #43
2018-10-04T11:31:09.131Z,1538652669.131 [Default:CheckIn] Running Loop=43
2018-10-04T11:31:09.131Z,1538652669.131 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T11:31:09.131Z,1538652669.131 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T11:33:04.415Z,1538652784.415 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T11:33:04.415Z,1538652784.415 [NAL9602] Data Fault, FailCount= 5
2018-10-04T11:33:04.415Z,1538652784.415 [NAL9602](ERROR): Data Fault
2018-10-04T11:33:04.502Z,1538652784.502 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T11:33:04.503Z,1538652784.503 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T11:33:04.811Z,1538652784.811 [NAL9602](INFO): Powering down
2018-10-04T11:33:04.890Z,1538652784.890 [CBIT](INFO): Critical error at 20181004T113304
2018-10-04T11:34:08.595Z,1538652848.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:34:08.595Z,1538652848.595 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-10-04T11:34:08.596Z,1538652848.596 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:34:08.598Z,1538652848.598 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:34:08.598Z,1538652848.598 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-10-04T11:34:08.598Z,1538652848.598 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:34:08.611Z,1538652848.611 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:34:08.611Z,1538652848.611 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:34:09.010Z,1538652849.010 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:34:09.010Z,1538652849.010 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-10-04T11:34:09.011Z,1538652849.011 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:34:09.011Z,1538652849.011 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-10-04T11:34:09.370Z,1538652849.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:34:09.370Z,1538652849.370 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:34:09.371Z,1538652849.371 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:34:09.371Z,1538652849.371 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:34:09.371Z,1538652849.371 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:34:09.372Z,1538652849.372 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:35:04.762Z,1538652904.762 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T11:35:04.762Z,1538652904.762 [NAL9602] No Fault, FailCount= 5
2018-10-04T11:35:05.095Z,1538652905.095 [NAL9602](INFO): Powering up NAL9602
2018-10-04T11:35:16.291Z,1538652916.291 [NAL9602](INFO): NAL9602 initialized
2018-10-04T11:36:10.836Z,1538652970.836 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T11:31:09.1Z
2018-10-04T11:36:10.836Z,1538652970.836 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T11:36:10.836Z,1538652970.836 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T11:36:19.217Z,1538652979.217 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0130.lzma
2018-10-04T11:36:19.973Z,1538652979.973 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0130.lzma.bak
2018-10-04T11:36:19.974Z,1538652979.974 [DataOverHttps](INFO): SBD MOMSN=8610810
2018-10-04T11:36:30.833Z,1538652990.833 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0131.lzma
2018-10-04T11:36:31.591Z,1538652991.591 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0131.lzma.bak
2018-10-04T11:36:31.591Z,1538652991.591 [DataOverHttps](INFO): SBD MOMSN=8610813
2018-10-04T11:36:32.568Z,1538652992.568 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T11:36:32.568Z,1538652992.568 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T11:36:32.569Z,1538652992.569 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T11:37:11.547Z,1538653031.547 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:37:11.547Z,1538653031.547 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-10-04T11:37:11.548Z,1538653031.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:37:11.549Z,1538653031.549 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:37:11.550Z,1538653031.550 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-10-04T11:37:11.550Z,1538653031.550 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:37:11.562Z,1538653031.562 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:37:11.563Z,1538653031.563 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:37:11.714Z,1538653031.714 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:37:11.714Z,1538653031.714 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-10-04T11:37:11.714Z,1538653031.714 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:37:11.715Z,1538653031.715 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-10-04T11:37:12.025Z,1538653032.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:37:12.026Z,1538653032.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:37:12.026Z,1538653032.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:37:12.027Z,1538653032.027 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:37:12.027Z,1538653032.027 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:37:12.027Z,1538653032.027 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:40:12.065Z,1538653212.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:40:12.065Z,1538653212.065 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-10-04T11:40:12.066Z,1538653212.066 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:40:12.067Z,1538653212.067 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:40:12.067Z,1538653212.067 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-10-04T11:40:12.068Z,1538653212.068 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:40:12.081Z,1538653212.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:40:12.081Z,1538653212.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:40:12.486Z,1538653212.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:40:12.486Z,1538653212.486 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-10-04T11:40:12.487Z,1538653212.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:40:12.487Z,1538653212.487 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-10-04T11:40:12.846Z,1538653212.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:40:12.846Z,1538653212.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:40:12.847Z,1538653212.847 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:40:12.847Z,1538653212.847 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:40:12.847Z,1538653212.847 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:40:12.848Z,1538653212.848 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:41:20.885Z,1538653280.885 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-04T11:41:32.886Z,1538653292.886 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T11:41:32.887Z,1538653292.887 [Default:CheckIn:C.Wait] Stopped
2018-10-04T11:41:32.887Z,1538653292.887 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T11:41:32.887Z,1538653292.887 [Default:CheckIn:D] Running Loop=1
2018-10-04T11:41:33.307Z,1538653293.307 [Default:CheckIn:D] Stopped
2018-10-04T11:41:33.307Z,1538653293.307 [Default:CheckIn:E] Running Loop=1
2018-10-04T11:41:33.713Z,1538653293.713 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 445.092318 min 
2018-10-04T11:41:33.714Z,1538653293.714 [Default:CheckIn:E] Stopped
2018-10-04T11:41:33.714Z,1538653293.714 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T11:41:33.714Z,1538653293.714 [Default:CheckIn] Stopped
2018-10-04T11:41:33.714Z,1538653293.714 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T11:41:33.714Z,1538653293.714 [Default:CheckIn](INFO): Running loop #44
2018-10-04T11:41:33.714Z,1538653293.714 [Default:CheckIn] Running Loop=44
2018-10-04T11:41:33.715Z,1538653293.714 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T11:41:33.715Z,1538653293.715 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T11:43:13.266Z,1538653393.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:43:13.266Z,1538653393.266 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-10-04T11:43:13.266Z,1538653393.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:43:13.268Z,1538653393.268 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:43:13.268Z,1538653393.268 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-10-04T11:43:13.268Z,1538653393.268 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:43:13.294Z,1538653393.294 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:43:13.294Z,1538653393.294 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:43:13.662Z,1538653393.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:43:13.662Z,1538653393.662 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-10-04T11:43:13.663Z,1538653393.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:43:13.663Z,1538653393.663 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-10-04T11:43:14.050Z,1538653394.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:43:14.050Z,1538653394.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:43:14.051Z,1538653394.051 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:43:14.051Z,1538653394.051 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:43:14.051Z,1538653394.051 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:43:14.052Z,1538653394.052 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:45:18.299Z,1538653518.299 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T11:45:18.299Z,1538653518.299 [NAL9602] Data Fault, FailCount= 1
2018-10-04T11:45:18.299Z,1538653518.299 [NAL9602](ERROR): Data Fault
2018-10-04T11:45:18.387Z,1538653518.387 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T11:45:18.699Z,1538653518.699 [NAL9602](INFO): Powering down
2018-10-04T11:45:19.581Z,1538653519.581 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T11:45:19.581Z,1538653519.581 [NAL9602] No Fault, FailCount= 1
2018-10-04T11:45:48.787Z,1538653548.787 [NAL9602](INFO): Powering up NAL9602
2018-10-04T11:46:01.273Z,1538653561.273 [NAL9602](INFO): NAL9602 initialized
2018-10-04T11:46:14.087Z,1538653574.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:46:14.087Z,1538653574.087 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-10-04T11:46:14.087Z,1538653574.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:46:14.089Z,1538653574.089 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:46:14.089Z,1538653574.089 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-10-04T11:46:14.089Z,1538653574.089 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:46:14.161Z,1538653574.161 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:46:14.162Z,1538653574.162 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:46:14.554Z,1538653574.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:46:14.554Z,1538653574.554 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-10-04T11:46:14.555Z,1538653574.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:46:14.555Z,1538653574.555 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-10-04T11:46:14.930Z,1538653574.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:46:14.931Z,1538653574.931 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:46:14.931Z,1538653574.931 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:46:14.931Z,1538653574.931 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:46:14.932Z,1538653574.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:46:14.932Z,1538653574.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:46:36.095Z,1538653596.095 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T11:41:33.7Z
2018-10-04T11:46:36.095Z,1538653596.095 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T11:46:36.095Z,1538653596.095 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T11:46:41.025Z,1538653601.025 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0133.lzma
2018-10-04T11:46:41.796Z,1538653601.796 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0133.lzma.bak
2018-10-04T11:46:41.796Z,1538653601.796 [DataOverHttps](INFO): SBD MOMSN=8610817
2018-10-04T11:46:50.978Z,1538653610.978 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0134.lzma
2018-10-04T11:46:51.736Z,1538653611.736 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0134.lzma.bak
2018-10-04T11:46:51.736Z,1538653611.736 [DataOverHttps](INFO): SBD MOMSN=8610819
2018-10-04T11:46:52.684Z,1538653612.684 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T11:46:52.684Z,1538653612.684 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T11:46:52.684Z,1538653612.684 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T11:48:43.469Z,1538653723.469 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T11:49:17.482Z,1538653757.482 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:49:17.483Z,1538653757.483 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-10-04T11:49:17.483Z,1538653757.483 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:49:17.484Z,1538653757.484 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:49:17.486Z,1538653757.486 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-10-04T11:49:17.486Z,1538653757.486 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:49:17.499Z,1538653757.499 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:49:17.499Z,1538653757.499 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:49:17.654Z,1538653757.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:49:17.654Z,1538653757.654 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-10-04T11:49:17.655Z,1538653757.655 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:49:17.655Z,1538653757.655 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-10-04T11:49:18.002Z,1538653758.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:49:18.002Z,1538653758.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:49:18.003Z,1538653758.003 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:49:18.003Z,1538653758.003 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:49:18.003Z,1538653758.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:49:18.004Z,1538653758.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:51:52.812Z,1538653912.812 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T11:51:52.829Z,1538653912.829 [Default:CheckIn:C.Wait] Stopped
2018-10-04T11:51:52.829Z,1538653912.829 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T11:51:52.829Z,1538653912.829 [Default:CheckIn:D] Running Loop=1
2018-10-04T11:51:53.254Z,1538653913.254 [Default:CheckIn:D] Stopped
2018-10-04T11:51:53.255Z,1538653913.255 [Default:CheckIn:E] Running Loop=1
2018-10-04T11:51:53.625Z,1538653913.625 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 455.424772 min 
2018-10-04T11:51:53.625Z,1538653913.625 [Default:CheckIn:E] Stopped
2018-10-04T11:51:53.625Z,1538653913.625 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T11:51:53.626Z,1538653913.626 [Default:CheckIn] Stopped
2018-10-04T11:51:53.626Z,1538653913.626 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T11:51:53.626Z,1538653913.626 [Default:CheckIn](INFO): Running loop #45
2018-10-04T11:51:53.626Z,1538653913.626 [Default:CheckIn] Running Loop=45
2018-10-04T11:51:53.626Z,1538653913.626 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T11:51:53.626Z,1538653913.626 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T11:52:18.099Z,1538653938.099 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:52:18.100Z,1538653938.100 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-10-04T11:52:18.100Z,1538653938.100 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:52:18.106Z,1538653938.106 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:52:18.106Z,1538653938.106 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-10-04T11:52:18.106Z,1538653938.106 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:52:18.136Z,1538653938.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:52:18.136Z,1538653938.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:52:18.519Z,1538653938.519 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:52:18.519Z,1538653938.519 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-10-04T11:52:18.519Z,1538653938.519 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:52:18.520Z,1538653938.520 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-10-04T11:52:18.906Z,1538653938.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:52:18.907Z,1538653938.907 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:52:18.907Z,1538653938.907 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:52:18.908Z,1538653938.908 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:52:18.908Z,1538653938.908 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:52:18.908Z,1538653938.908 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:55:19.155Z,1538654119.155 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:55:19.155Z,1538654119.155 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-10-04T11:55:19.155Z,1538654119.155 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:55:19.157Z,1538654119.157 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:55:19.158Z,1538654119.158 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-10-04T11:55:19.158Z,1538654119.158 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:55:19.191Z,1538654119.191 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:55:19.191Z,1538654119.191 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:55:19.632Z,1538654119.632 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:55:19.633Z,1538654119.633 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-10-04T11:55:19.645Z,1538654119.645 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:55:19.645Z,1538654119.645 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-10-04T11:55:19.966Z,1538654119.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:55:19.967Z,1538654119.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:55:19.967Z,1538654119.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:55:19.967Z,1538654119.967 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:55:19.968Z,1538654119.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:55:19.968Z,1538654119.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:56:03.619Z,1538654163.619 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T11:56:03.619Z,1538654163.619 [NAL9602] Data Fault, FailCount= 2
2018-10-04T11:56:03.619Z,1538654163.619 [NAL9602](ERROR): Data Fault
2018-10-04T11:56:03.681Z,1538654163.681 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T11:56:04.019Z,1538654164.019 [NAL9602](INFO): Powering down
2018-10-04T11:56:04.877Z,1538654164.877 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T11:56:04.877Z,1538654164.877 [NAL9602] No Fault, FailCount= 2
2018-10-04T11:56:34.295Z,1538654194.295 [NAL9602](INFO): Powering up NAL9602
2018-10-04T11:56:45.099Z,1538654205.099 [NAL9602](INFO): NAL9602 initialized
2018-10-04T11:56:55.934Z,1538654215.934 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T11:51:53.6Z
2018-10-04T11:56:55.934Z,1538654215.934 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T11:56:55.934Z,1538654215.934 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T11:57:00.000Z,1538654221.000 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0136.lzma
2018-10-04T11:57:01.780Z,1538654221.780 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0136.lzma.bak
2018-10-04T11:57:01.780Z,1538654221.780 [DataOverHttps](INFO): SBD MOMSN=8610823
2018-10-04T11:57:11.382Z,1538654231.382 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0137.lzma
2018-10-04T11:57:12.132Z,1538654232.132 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0137.lzma.bak
2018-10-04T11:57:12.132Z,1538654232.132 [DataOverHttps](INFO): SBD MOMSN=8610825
2018-10-04T11:57:13.057Z,1538654233.057 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T11:57:13.057Z,1538654233.057 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T11:57:13.057Z,1538654233.057 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T11:58:20.091Z,1538654300.091 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:58:20.091Z,1538654300.091 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-10-04T11:58:20.091Z,1538654300.091 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T11:58:20.097Z,1538654300.097 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T11:58:20.097Z,1538654300.097 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-10-04T11:58:20.097Z,1538654300.097 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T11:58:20.127Z,1538654300.127 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T11:58:20.128Z,1538654300.128 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T11:58:20.544Z,1538654300.544 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T11:58:20.544Z,1538654300.544 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-10-04T11:58:20.546Z,1538654300.546 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T11:58:20.546Z,1538654300.546 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-10-04T11:58:20.902Z,1538654300.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T11:58:20.902Z,1538654300.902 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:58:20.903Z,1538654300.903 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T11:58:20.903Z,1538654300.903 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T11:58:20.904Z,1538654300.904 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T11:58:20.904Z,1538654300.904 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:00:14.468Z,1538654414.468 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-04T12:01:26.021Z,1538654486.021 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:01:26.021Z,1538654486.021 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-10-04T12:01:26.022Z,1538654486.022 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:01:26.034Z,1538654486.034 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:01:26.034Z,1538654486.034 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-10-04T12:01:26.034Z,1538654486.034 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:01:26.098Z,1538654486.098 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:01:26.099Z,1538654486.099 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:01:26.309Z,1538654486.309 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:01:26.309Z,1538654486.309 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-10-04T12:01:26.309Z,1538654486.309 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:01:26.310Z,1538654486.310 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-10-04T12:01:26.572Z,1538654486.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:01:26.573Z,1538654486.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:01:26.574Z,1538654486.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:01:26.574Z,1538654486.574 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:01:26.574Z,1538654486.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:01:26.575Z,1538654486.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:02:04.576Z,1538654524.576 [RDI_Pathfinder](ERROR): Failed to parse:
    +0.00,        +0.00,        +0.00,   0.00,28079.44
2018-10-04T12:02:13.369Z,1538654533.369 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T12:02:13.369Z,1538654533.369 [Default:CheckIn:C.Wait] Stopped
2018-10-04T12:02:13.369Z,1538654533.369 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T12:02:13.369Z,1538654533.369 [Default:CheckIn:D] Running Loop=1
2018-10-04T12:02:13.765Z,1538654533.765 [Default:CheckIn:D] Stopped
2018-10-04T12:02:13.765Z,1538654533.765 [Default:CheckIn:E] Running Loop=1
2018-10-04T12:02:14.189Z,1538654534.189 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 465.766276 min 
2018-10-04T12:02:14.189Z,1538654534.189 [Default:CheckIn:E] Stopped
2018-10-04T12:02:14.189Z,1538654534.189 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T12:02:14.189Z,1538654534.189 [Default:CheckIn] Stopped
2018-10-04T12:02:14.189Z,1538654534.189 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T12:02:14.190Z,1538654534.190 [Default:CheckIn](INFO): Running loop #46
2018-10-04T12:02:14.190Z,1538654534.190 [Default:CheckIn] Running Loop=46
2018-10-04T12:02:14.190Z,1538654534.190 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T12:02:14.190Z,1538654534.190 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T12:02:35.472Z,1538654555.472 [RDI_Pathfinder](ERROR): Failed to parse::SA,   +0.00,   +0.00,  0.00
2018-10-04T12:04:10.923Z,1538654650.923 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T12:04:10.923Z,1538654650.923 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,
2018-10-04T12:04:26.607Z,1538654666.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:04:26.607Z,1538654666.607 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-10-04T12:04:26.607Z,1538654666.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:04:26.613Z,1538654666.613 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:04:26.614Z,1538654666.614 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-10-04T12:04:26.614Z,1538654666.614 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:04:26.639Z,1538654666.639 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:04:26.640Z,1538654666.640 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:04:27.046Z,1538654667.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:04:27.046Z,1538654667.046 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-10-04T12:04:27.047Z,1538654667.047 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:04:27.047Z,1538654667.047 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-10-04T12:04:27.423Z,1538654667.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:04:27.424Z,1538654667.424 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:04:27.424Z,1538654667.424 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:04:27.429Z,1538654667.429 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:04:27.429Z,1538654667.429 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:04:27.430Z,1538654667.430 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:06:48.251Z,1538654808.251 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T12:06:48.251Z,1538654808.251 [NAL9602] Data Fault, FailCount= 3
2018-10-04T12:06:48.251Z,1538654808.251 [NAL9602](ERROR): Data Fault
2018-10-04T12:06:48.362Z,1538654808.362 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T12:06:48.651Z,1538654808.651 [NAL9602](INFO): Powering down
2018-10-04T12:06:49.543Z,1538654809.543 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T12:06:49.543Z,1538654809.543 [NAL9602] No Fault, FailCount= 3
2018-10-04T12:07:16.374Z,1538654836.374 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T12:02:14.2Z
2018-10-04T12:07:16.374Z,1538654836.374 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T12:07:16.374Z,1538654836.374 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T12:07:21.183Z,1538654841.183 [NAL9602](INFO): Powering up NAL9602
2018-10-04T12:07:21.289Z,1538654841.289 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0139.lzma
2018-10-04T12:07:22.099Z,1538654842.099 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0139.lzma.bak
2018-10-04T12:07:22.099Z,1538654842.099 [DataOverHttps](INFO): SBD MOMSN=8610829
2018-10-04T12:07:27.615Z,1538654847.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:07:27.615Z,1538654847.615 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-10-04T12:07:27.616Z,1538654847.616 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:07:27.627Z,1538654847.627 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:07:27.627Z,1538654847.627 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-10-04T12:07:27.627Z,1538654847.627 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:07:27.678Z,1538654847.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:07:27.679Z,1538654847.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:07:28.011Z,1538654848.011 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:07:28.011Z,1538654848.011 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-10-04T12:07:28.012Z,1538654848.012 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:07:28.012Z,1538654848.012 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-10-04T12:07:31.325Z,1538654851.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:07:31.326Z,1538654851.326 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:07:31.326Z,1538654851.326 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:07:31.327Z,1538654851.327 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:07:31.327Z,1538654851.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:07:31.328Z,1538654851.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:07:31.360Z,1538654851.360 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0140.lzma
2018-10-04T12:07:32.166Z,1538654852.166 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0140.lzma.bak
2018-10-04T12:07:32.167Z,1538654852.167 [DataOverHttps](INFO): SBD MOMSN=8610831
2018-10-04T12:07:32.193Z,1538654852.193 [NAL9602](INFO): NAL9602 initialized
2018-10-04T12:07:32.220Z,1538654852.220 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.880, -0.002, 0.000
2018-10-04T12:07:33.066Z,1538654853.066 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T12:07:33.066Z,1538654853.066 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T12:07:33.066Z,1538654853.066 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T12:07:46.220Z,1538654866.220 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-04T12:07:46.220Z,1538654866.220 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0    +0.00,        +0.00,   0.00,28420.77
2018-10-04T12:10:32.895Z,1538655032.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:10:32.895Z,1538655032.895 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-10-04T12:10:32.895Z,1538655032.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:10:32.897Z,1538655032.897 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:10:32.897Z,1538655032.897 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-10-04T12:10:32.897Z,1538655032.897 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:10:32.943Z,1538655032.943 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:10:32.943Z,1538655032.943 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:10:33.047Z,1538655033.047 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:10:33.047Z,1538655033.047 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-10-04T12:10:33.048Z,1538655033.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:10:33.048Z,1538655033.048 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-10-04T12:10:33.426Z,1538655033.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:10:33.427Z,1538655033.427 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:10:33.427Z,1538655033.427 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:10:33.428Z,1538655033.428 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:10:33.428Z,1538655033.428 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:10:33.429Z,1538655033.429 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:12:01.288Z,1538655121.288 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T12:12:33.438Z,1538655153.438 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T12:12:33.438Z,1538655153.438 [Default:CheckIn:C.Wait] Stopped
2018-10-04T12:12:33.438Z,1538655153.438 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T12:12:33.438Z,1538655153.438 [Default:CheckIn:D] Running Loop=1
2018-10-04T12:12:33.828Z,1538655153.828 [Default:CheckIn:D] Stopped
2018-10-04T12:12:33.829Z,1538655153.829 [Default:CheckIn:E] Running Loop=1
2018-10-04T12:12:34.229Z,1538655154.229 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 476.101009 min 
2018-10-04T12:12:34.229Z,1538655154.229 [Default:CheckIn:E] Stopped
2018-10-04T12:12:34.229Z,1538655154.229 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T12:12:34.229Z,1538655154.229 [Default:CheckIn] Stopped
2018-10-04T12:12:34.230Z,1538655154.230 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T12:12:34.230Z,1538655154.230 [Default:CheckIn](INFO): Running loop #47
2018-10-04T12:12:34.230Z,1538655154.230 [Default:CheckIn] Running Loop=47
2018-10-04T12:12:34.230Z,1538655154.230 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T12:12:34.230Z,1538655154.230 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T12:13:30.789Z,1538655210.789 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T12:13:33.607Z,1538655213.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:13:33.607Z,1538655213.607 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-10-04T12:13:33.607Z,1538655213.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:13:33.613Z,1538655213.613 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:13:33.613Z,1538655213.613 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-10-04T12:13:33.613Z,1538655213.613 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:13:33.640Z,1538655213.640 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:13:33.640Z,1538655213.640 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:13:34.031Z,1538655214.031 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:13:34.032Z,1538655214.032 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-10-04T12:13:34.032Z,1538655214.032 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:13:34.032Z,1538655214.032 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-10-04T12:13:34.425Z,1538655214.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:13:34.426Z,1538655214.426 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:13:34.428Z,1538655214.428 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:13:34.430Z,1538655214.430 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:13:34.431Z,1538655214.431 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:13:34.431Z,1538655214.431 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:16:34.639Z,1538655394.639 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:16:34.639Z,1538655394.639 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-10-04T12:16:34.639Z,1538655394.639 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:16:34.645Z,1538655394.645 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:16:34.645Z,1538655394.645 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-10-04T12:16:34.645Z,1538655394.645 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:16:34.663Z,1538655394.663 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:16:34.663Z,1538655394.663 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:16:35.063Z,1538655395.063 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:16:35.063Z,1538655395.063 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-10-04T12:16:35.064Z,1538655395.064 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:16:35.064Z,1538655395.064 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-10-04T12:16:35.451Z,1538655395.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:16:35.452Z,1538655395.452 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:16:35.452Z,1538655395.452 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:16:35.452Z,1538655395.452 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:16:35.457Z,1538655395.457 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:16:35.458Z,1538655395.458 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:17:36.317Z,1538655456.317 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T12:12:34.2Z
2018-10-04T12:17:36.317Z,1538655456.317 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T12:17:36.317Z,1538655456.317 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T12:17:36.989Z,1538655456.989 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T12:17:36.989Z,1538655456.989 [NAL9602] Data Fault, FailCount= 4
2018-10-04T12:17:36.989Z,1538655456.989 [NAL9602](ERROR): Data Fault
2018-10-04T12:17:37.076Z,1538655457.076 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T12:17:37.158Z,1538655457.158 [NAL9602](INFO): Powering down
2018-10-04T12:17:37.000Z,1538655458.000 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T12:17:37.000Z,1538655458.000 [NAL9602] No Fault, FailCount= 4
2018-10-04T12:17:41.362Z,1538655461.362 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0142.lzma
2018-10-04T12:17:42.122Z,1538655462.122 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0142.lzma.bak
2018-10-04T12:17:42.123Z,1538655462.123 [DataOverHttps](INFO): SBD MOMSN=8610835
2018-10-04T12:17:51.259Z,1538655471.259 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20181004T041305/Express0143.lzma
2018-10-04T12:17:52.016Z,1538655472.016 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0143.lzma.bak
2018-10-04T12:17:52.016Z,1538655472.016 [DataOverHttps](INFO): SBD MOMSN=8610837
2018-10-04T12:17:52.962Z,1538655472.962 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T12:17:52.962Z,1538655472.962 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T12:17:52.962Z,1538655472.962 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T12:18:07.213Z,1538655487.213 [NAL9602](INFO): Powering up NAL9602
2018-10-04T12:18:18.011Z,1538655498.011 [NAL9602](INFO): NAL9602 initialized
2018-10-04T12:19:35.475Z,1538655575.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:19:35.475Z,1538655575.475 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-10-04T12:19:35.475Z,1538655575.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:19:35.481Z,1538655575.481 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:19:35.481Z,1538655575.481 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-10-04T12:19:35.481Z,1538655575.481 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:19:35.516Z,1538655575.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:19:35.516Z,1538655575.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:19:35.866Z,1538655575.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:19:35.866Z,1538655575.866 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-10-04T12:19:35.867Z,1538655575.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:19:35.867Z,1538655575.867 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-10-04T12:19:36.255Z,1538655576.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:19:36.255Z,1538655576.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:19:36.256Z,1538655576.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:19:36.256Z,1538655576.256 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:19:36.256Z,1538655576.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:19:36.261Z,1538655576.261 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:22:38.814Z,1538655758.814 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:22:38.814Z,1538655758.814 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-10-04T12:22:38.814Z,1538655758.814 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:22:38.816Z,1538655758.816 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:22:38.816Z,1538655758.816 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-10-04T12:22:38.816Z,1538655758.816 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:22:38.861Z,1538655758.861 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:22:38.862Z,1538655758.862 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:22:38.982Z,1538655758.982 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:22:38.982Z,1538655758.982 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-10-04T12:22:38.983Z,1538655758.983 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:22:38.983Z,1538655758.983 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-10-04T12:22:39.334Z,1538655759.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:22:39.335Z,1538655759.335 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:22:39.335Z,1538655759.335 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:22:39.335Z,1538655759.335 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:22:39.336Z,1538655759.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:22:39.336Z,1538655759.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:22:53.339Z,1538655773.339 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T12:22:53.339Z,1538655773.339 [Default:CheckIn:C.Wait] Stopped
2018-10-04T12:22:53.339Z,1538655773.339 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T12:22:53.339Z,1538655773.339 [Default:CheckIn:D] Running Loop=1
2018-10-04T12:22:53.741Z,1538655773.741 [Default:CheckIn:D] Stopped
2018-10-04T12:22:53.741Z,1538655773.741 [Default:CheckIn:E] Running Loop=1
2018-10-04T12:22:54.159Z,1538655774.159 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 486.432813 min 
2018-10-04T12:22:54.160Z,1538655774.160 [Default:CheckIn:E] Stopped
2018-10-04T12:22:54.160Z,1538655774.160 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T12:22:54.160Z,1538655774.160 [Default:CheckIn] Stopped
2018-10-04T12:22:54.160Z,1538655774.160 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T12:22:54.160Z,1538655774.160 [Default:CheckIn](INFO): Running loop #48
2018-10-04T12:22:54.160Z,1538655774.160 [Default:CheckIn] Running Loop=48
2018-10-04T12:22:54.160Z,1538655774.160 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T12:22:54.160Z,1538655774.160 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T12:25:39.395Z,1538655939.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:25:39.395Z,1538655939.395 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-10-04T12:25:39.395Z,1538655939.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:25:39.401Z,1538655939.401 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:25:39.401Z,1538655939.401 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-10-04T12:25:39.402Z,1538655939.402 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:25:39.426Z,1538655939.426 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:25:39.427Z,1538655939.427 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:25:39.833Z,1538655939.833 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:25:39.833Z,1538655939.833 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-10-04T12:25:39.834Z,1538655939.834 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:25:39.834Z,1538655939.834 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-10-04T12:25:40.214Z,1538655940.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:25:40.215Z,1538655940.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:25:40.215Z,1538655940.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:25:40.215Z,1538655940.215 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:25:40.216Z,1538655940.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:25:40.216Z,1538655940.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:27:56.527Z,1538656076.527 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T12:22:54.2Z
2018-10-04T12:27:56.527Z,1538656076.527 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T12:27:56.527Z,1538656076.527 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T12:28:01.492Z,1538656081.492 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0145.lzma
2018-10-04T12:28:02.273Z,1538656082.273 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0145.lzma.bak
2018-10-04T12:28:02.273Z,1538656082.273 [DataOverHttps](INFO): SBD MOMSN=8610840
2018-10-04T12:28:11.462Z,1538656091.462 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0146.lzma
2018-10-04T12:28:12.236Z,1538656092.236 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0146.lzma.bak
2018-10-04T12:28:12.236Z,1538656092.236 [DataOverHttps](INFO): SBD MOMSN=8610842
2018-10-04T12:28:13.178Z,1538656093.178 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T12:28:13.179Z,1538656093.179 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T12:28:13.179Z,1538656093.179 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T12:28:19.303Z,1538656099.303 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T12:28:19.303Z,1538656099.303 [NAL9602] Data Fault, FailCount= 5
2018-10-04T12:28:19.303Z,1538656099.303 [NAL9602](ERROR): Data Fault
2018-10-04T12:28:19.380Z,1538656099.380 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T12:28:19.385Z,1538656099.385 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T12:28:19.699Z,1538656099.699 [NAL9602](INFO): Powering down
2018-10-04T12:28:19.785Z,1538656099.785 [CBIT](INFO): Critical error at 20181004T122819
2018-10-04T12:28:40.543Z,1538656120.543 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:28:40.543Z,1538656120.543 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-10-04T12:28:40.543Z,1538656120.543 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:28:40.561Z,1538656120.561 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:28:40.561Z,1538656120.561 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-10-04T12:28:40.561Z,1538656120.561 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:28:40.587Z,1538656120.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:28:40.587Z,1538656120.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:28:40.963Z,1538656120.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:28:40.963Z,1538656120.963 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-10-04T12:28:40.963Z,1538656120.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:28:40.963Z,1538656120.963 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-10-04T12:28:41.342Z,1538656121.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:28:41.343Z,1538656121.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:28:41.343Z,1538656121.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:28:41.344Z,1538656121.344 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:28:41.344Z,1538656121.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:28:41.344Z,1538656121.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:28:53.450Z,1538656133.450 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.920, 0.003, 65.535
2018-10-04T12:30:19.660Z,1538656219.660 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T12:30:19.660Z,1538656219.660 [NAL9602] No Fault, FailCount= 5
2018-10-04T12:30:19.975Z,1538656219.975 [NAL9602](INFO): Powering up NAL9602
2018-10-04T12:30:30.779Z,1538656230.779 [NAL9602](INFO): NAL9602 initialized
2018-10-04T12:31:41.440Z,1538656301.440 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:31:41.440Z,1538656301.440 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-10-04T12:31:41.440Z,1538656301.440 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:31:41.446Z,1538656301.446 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:31:41.446Z,1538656301.446 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-10-04T12:31:41.446Z,1538656301.446 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:31:41.463Z,1538656301.463 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:31:41.464Z,1538656301.464 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:31:41.834Z,1538656301.834 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:31:41.835Z,1538656301.835 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-10-04T12:31:41.835Z,1538656301.835 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:31:41.835Z,1538656301.835 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-10-04T12:31:42.257Z,1538656302.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:31:42.257Z,1538656302.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:31:42.258Z,1538656302.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:31:42.258Z,1538656302.258 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:31:42.259Z,1538656302.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:31:42.259Z,1538656302.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:33:13.421Z,1538656393.421 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T12:33:13.421Z,1538656393.421 [Default:CheckIn:C.Wait] Stopped
2018-10-04T12:33:13.422Z,1538656393.422 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T12:33:13.422Z,1538656393.422 [Default:CheckIn:D] Running Loop=1
2018-10-04T12:33:13.812Z,1538656393.812 [Default:CheckIn:D] Stopped
2018-10-04T12:33:13.813Z,1538656393.813 [Default:CheckIn:E] Running Loop=1
2018-10-04T12:33:14.225Z,1538656394.225 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 496.767415 min 
2018-10-04T12:33:14.225Z,1538656394.225 [Default:CheckIn:E] Stopped
2018-10-04T12:33:14.225Z,1538656394.225 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T12:33:14.226Z,1538656394.226 [Default:CheckIn] Stopped
2018-10-04T12:33:14.226Z,1538656394.226 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T12:33:14.226Z,1538656394.226 [Default:CheckIn](INFO): Running loop #49
2018-10-04T12:33:14.226Z,1538656394.226 [Default:CheckIn] Running Loop=49
2018-10-04T12:33:14.226Z,1538656394.226 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T12:33:14.226Z,1538656394.226 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T12:33:49.876Z,1538656429.876 [RDI_Pathfinder](ERROR): only read 4 of 5 data items
2018-10-04T12:33:49.877Z,1538656429.877 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32BS,-32768,-32768,-32768,V
2018-10-04T12:34:45.228Z,1538656485.228 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:34:45.228Z,1538656485.228 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-10-04T12:34:45.228Z,1538656485.228 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:34:45.230Z,1538656485.230 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:34:45.231Z,1538656485.231 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-10-04T12:34:45.231Z,1538656485.231 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:34:45.244Z,1538656485.244 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:34:45.244Z,1538656485.244 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:34:45.370Z,1538656485.370 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:34:45.370Z,1538656485.370 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-10-04T12:34:45.371Z,1538656485.371 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:34:45.371Z,1538656485.371 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-10-04T12:34:45.724Z,1538656485.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:34:45.724Z,1538656485.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:34:45.725Z,1538656485.725 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:34:45.725Z,1538656485.725 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:34:45.726Z,1538656485.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:34:45.726Z,1538656485.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:35:21.414Z,1538656521.414 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.887,*-0.010,*0.000
2018-10-04T12:36:34.442Z,1538656594.442 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T12:37:45.896Z,1538656665.896 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:37:45.896Z,1538656665.896 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-10-04T12:37:45.896Z,1538656665.896 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:37:45.898Z,1538656665.898 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:37:45.898Z,1538656665.898 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-10-04T12:37:45.898Z,1538656665.898 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:37:45.923Z,1538656665.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:37:45.923Z,1538656665.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:37:46.334Z,1538656666.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:37:46.334Z,1538656666.334 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-10-04T12:37:46.335Z,1538656666.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:37:46.335Z,1538656666.335 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-10-04T12:37:46.702Z,1538656666.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:37:46.702Z,1538656666.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:37:46.703Z,1538656666.703 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:37:46.703Z,1538656666.703 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:37:46.704Z,1538656666.704 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:37:46.704Z,1538656666.704 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:38:17.093Z,1538656697.093 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T12:33:14.2Z
2018-10-04T12:38:17.093Z,1538656697.093 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T12:38:17.093Z,1538656697.093 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T12:38:22.022Z,1538656702.022 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0148.lzma
2018-10-04T12:38:22.792Z,1538656702.792 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0148.lzma.bak
2018-10-04T12:38:22.792Z,1538656702.792 [DataOverHttps](INFO): SBD MOMSN=8610846
2018-10-04T12:38:31.959Z,1538656711.959 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0149.lzma
2018-10-04T12:38:32.743Z,1538656712.743 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0149.lzma.bak
2018-10-04T12:38:32.743Z,1538656712.743 [DataOverHttps](INFO): SBD MOMSN=8610849
2018-10-04T12:38:33.674Z,1538656713.674 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T12:38:33.674Z,1538656713.674 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T12:38:33.675Z,1538656713.675 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T12:40:31.747Z,1538656831.747 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T12:40:31.747Z,1538656831.747 [NAL9602] Data Fault, FailCount= 1
2018-10-04T12:40:31.747Z,1538656831.747 [NAL9602](ERROR): Data Fault
2018-10-04T12:40:31.821Z,1538656831.821 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T12:40:32.151Z,1538656832.151 [NAL9602](INFO): Powering down
2018-10-04T12:40:33.014Z,1538656833.014 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T12:40:33.014Z,1538656833.014 [NAL9602] No Fault, FailCount= 1
2018-10-04T12:40:46.983Z,1538656846.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:40:46.983Z,1538656846.983 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-10-04T12:40:46.983Z,1538656846.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:40:46.985Z,1538656846.985 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:40:46.985Z,1538656846.985 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-10-04T12:40:46.985Z,1538656846.985 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:40:47.020Z,1538656847.020 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:40:47.020Z,1538656847.020 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:40:47.426Z,1538656847.426 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:40:47.426Z,1538656847.426 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-10-04T12:40:47.427Z,1538656847.427 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:40:47.427Z,1538656847.427 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-10-04T12:40:47.786Z,1538656847.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:40:47.786Z,1538656847.786 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:40:47.787Z,1538656847.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:40:47.787Z,1538656847.787 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:40:47.787Z,1538656847.787 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:40:47.788Z,1538656847.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:41:02.223Z,1538656862.223 [NAL9602](INFO): Powering up NAL9602
2018-10-04T12:41:13.427Z,1538656873.427 [NAL9602](INFO): NAL9602 initialized
2018-10-04T12:42:57.210Z,1538656977.210 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-04T12:42:57.210Z,1538656977.210 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.0  +0.00,   0.00,30527.65
2018-10-04T12:43:26.527Z,1538657006.527 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T12:43:26.527Z,1538657006.527 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-3268,V
2018-10-04T12:43:34.161Z,1538657014.161 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T12:43:34.161Z,1538657014.161 [Default:CheckIn:C.Wait] Stopped
2018-10-04T12:43:34.162Z,1538657014.162 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T12:43:34.162Z,1538657014.162 [Default:CheckIn:D] Running Loop=1
2018-10-04T12:43:34.533Z,1538657014.533 [Default:CheckIn:D] Stopped
2018-10-04T12:43:34.533Z,1538657014.533 [Default:CheckIn:E] Running Loop=1
2018-10-04T12:43:34.921Z,1538657014.921 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 507.112695 min 
2018-10-04T12:43:34.922Z,1538657014.922 [Default:CheckIn:E] Stopped
2018-10-04T12:43:34.922Z,1538657014.922 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T12:43:34.922Z,1538657014.922 [Default:CheckIn] Stopped
2018-10-04T12:43:34.922Z,1538657014.922 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T12:43:34.922Z,1538657014.922 [Default:CheckIn](INFO): Running loop #50
2018-10-04T12:43:34.922Z,1538657014.922 [Default:CheckIn] Running Loop=50
2018-10-04T12:43:34.922Z,1538657014.922 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T12:43:34.923Z,1538657014.923 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T12:43:48.127Z,1538657028.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:43:48.127Z,1538657028.127 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-10-04T12:43:48.127Z,1538657028.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:43:48.129Z,1538657028.129 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:43:48.129Z,1538657028.129 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-10-04T12:43:48.129Z,1538657028.129 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:43:48.142Z,1538657028.142 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:43:48.142Z,1538657028.142 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:43:48.578Z,1538657028.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:43:48.578Z,1538657028.578 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-10-04T12:43:48.579Z,1538657028.579 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:43:48.579Z,1538657028.579 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-10-04T12:43:48.938Z,1538657028.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:43:48.939Z,1538657028.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:43:48.939Z,1538657028.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:43:48.939Z,1538657028.939 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:43:48.940Z,1538657028.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:43:48.940Z,1538657028.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:44:41.548Z,1538657081.548 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe, 15.873, -0.009, 0.000
2018-10-04T12:46:51.548Z,1538657211.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:46:51.548Z,1538657211.548 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-10-04T12:46:51.548Z,1538657211.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:46:51.583Z,1538657211.583 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:46:51.583Z,1538657211.583 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-10-04T12:46:51.583Z,1538657211.583 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:46:51.620Z,1538657211.620 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:46:51.620Z,1538657211.620 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:46:51.708Z,1538657211.708 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:46:51.709Z,1538657211.709 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-10-04T12:46:51.713Z,1538657211.713 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:46:51.713Z,1538657211.713 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-10-04T12:46:52.104Z,1538657212.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:46:52.105Z,1538657212.105 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:46:52.106Z,1538657212.106 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:46:52.106Z,1538657212.106 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:46:52.107Z,1538657212.107 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:46:52.108Z,1538657212.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:48:37.496Z,1538657317.496 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T12:43:34.9Z
2018-10-04T12:48:37.496Z,1538657317.496 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T12:48:37.496Z,1538657317.496 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T12:48:42.461Z,1538657322.461 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0151.lzma
2018-10-04T12:48:43.216Z,1538657323.216 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0151.lzma.bak
2018-10-04T12:48:43.217Z,1538657323.217 [DataOverHttps](INFO): SBD MOMSN=8610853
2018-10-04T12:48:52.412Z,1538657332.412 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0152.lzma
2018-10-04T12:48:53.184Z,1538657333.184 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0152.lzma.bak
2018-10-04T12:48:53.184Z,1538657333.184 [DataOverHttps](INFO): SBD MOMSN=8610855
2018-10-04T12:48:54.122Z,1538657334.122 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T12:48:54.122Z,1538657334.122 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T12:48:54.122Z,1538657334.122 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T12:49:52.447Z,1538657392.447 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:49:52.447Z,1538657392.447 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-10-04T12:49:52.447Z,1538657392.447 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:49:52.449Z,1538657392.449 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:49:52.449Z,1538657392.449 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-10-04T12:49:52.449Z,1538657392.449 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:49:52.478Z,1538657392.478 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:49:52.479Z,1538657392.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:49:52.858Z,1538657392.858 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:49:52.858Z,1538657392.858 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-10-04T12:49:52.859Z,1538657392.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:49:52.859Z,1538657392.859 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-10-04T12:49:53.260Z,1538657393.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:49:53.260Z,1538657393.260 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:49:53.261Z,1538657393.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:49:53.261Z,1538657393.261 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:49:53.262Z,1538657393.262 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:49:53.262Z,1538657393.262 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:51:14.615Z,1538657474.615 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T12:51:14.615Z,1538657474.615 [NAL9602] Data Fault, FailCount= 2
2018-10-04T12:51:14.615Z,1538657474.615 [NAL9602](ERROR): Data Fault
2018-10-04T12:51:14.678Z,1538657474.678 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T12:51:15.019Z,1538657475.019 [NAL9602](INFO): Powering down
2018-10-04T12:51:15.875Z,1538657475.875 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T12:51:15.875Z,1538657475.875 [NAL9602] No Fault, FailCount= 2
2018-10-04T12:51:45.247Z,1538657505.247 [NAL9602](INFO): Powering up NAL9602
2018-10-04T12:51:56.171Z,1538657516.171 [NAL9602](INFO): NAL9602 initialized
2018-10-04T12:52:30.716Z,1538657550.716 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T12:52:53.542Z,1538657573.542 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:52:53.542Z,1538657573.542 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-10-04T12:52:53.542Z,1538657573.542 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:52:53.544Z,1538657573.544 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:52:53.544Z,1538657573.544 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-10-04T12:52:53.544Z,1538657573.544 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:52:53.558Z,1538657573.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:52:53.558Z,1538657573.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:52:53.961Z,1538657573.961 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:52:53.961Z,1538657573.961 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-10-04T12:52:53.961Z,1538657573.961 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:52:53.961Z,1538657573.961 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-10-04T12:52:54.331Z,1538657574.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:52:54.331Z,1538657574.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:52:54.331Z,1538657574.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:52:54.332Z,1538657574.332 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:52:54.332Z,1538657574.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:52:54.349Z,1538657574.349 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:53:54.544Z,1538657634.544 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T12:53:54.561Z,1538657634.561 [Default:CheckIn:C.Wait] Stopped
2018-10-04T12:53:54.561Z,1538657634.561 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T12:53:54.561Z,1538657634.561 [Default:CheckIn:D] Running Loop=1
2018-10-04T12:53:54.936Z,1538657634.936 [Default:CheckIn:D] Stopped
2018-10-04T12:53:54.936Z,1538657634.936 [Default:CheckIn:E] Running Loop=1
2018-10-04T12:53:55.344Z,1538657635.344 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 517.452799 min 
2018-10-04T12:53:55.344Z,1538657635.344 [Default:CheckIn:E] Stopped
2018-10-04T12:53:55.345Z,1538657635.345 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T12:53:55.345Z,1538657635.345 [Default:CheckIn] Stopped
2018-10-04T12:53:55.345Z,1538657635.345 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T12:53:55.345Z,1538657635.345 [Default:CheckIn](INFO): Running loop #51
2018-10-04T12:53:55.345Z,1538657635.345 [Default:CheckIn] Running Loop=51
2018-10-04T12:53:55.345Z,1538657635.345 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T12:53:55.346Z,1538657635.346 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T12:55:54.457Z,1538657754.457 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:55:54.457Z,1538657754.457 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-10-04T12:55:54.457Z,1538657754.457 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:55:54.459Z,1538657754.459 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:55:54.459Z,1538657754.459 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-10-04T12:55:54.459Z,1538657754.459 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:55:54.493Z,1538657754.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:55:54.494Z,1538657754.494 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:55:54.859Z,1538657754.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:55:54.859Z,1538657754.859 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-10-04T12:55:54.860Z,1538657754.860 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:55:54.860Z,1538657754.860 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-10-04T12:55:55.254Z,1538657755.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:55:55.255Z,1538657755.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:55:55.255Z,1538657755.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:55:55.256Z,1538657755.256 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:55:55.256Z,1538657755.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:55:55.256Z,1538657755.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:58:57.492Z,1538657937.492 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:58:57.492Z,1538657937.492 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-10-04T12:58:57.493Z,1538657937.493 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T12:58:57.495Z,1538657937.495 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T12:58:57.495Z,1538657937.495 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-10-04T12:58:57.495Z,1538657937.495 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T12:58:57.497Z,1538657937.497 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T12:53:55.3Z
2018-10-04T12:58:57.497Z,1538657937.497 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T12:58:57.497Z,1538657937.497 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T12:58:57.533Z,1538657937.533 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T12:58:57.533Z,1538657937.533 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T12:58:57.639Z,1538657937.639 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T12:58:57.639Z,1538657937.639 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-10-04T12:58:57.640Z,1538657937.640 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T12:58:57.640Z,1538657937.640 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-10-04T12:58:58.319Z,1538657938.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T12:58:58.319Z,1538657938.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:58:58.319Z,1538657938.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:58:58.320Z,1538657938.320 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T12:58:58.320Z,1538657938.320 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T12:58:58.321Z,1538657938.321 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T12:59:02.469Z,1538657942.469 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0154.lzma
2018-10-04T12:59:07.973Z,1538657947.973 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0154.lzma.bak
2018-10-04T12:59:07.973Z,1538657947.973 [DataOverHttps](INFO): SBD MOMSN=8610859
2018-10-04T12:59:13.379Z,1538657953.379 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T12:59:17.032Z,1538657957.032 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0155.lzma
2018-10-04T12:59:17.816Z,1538657957.816 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0155.lzma.bak
2018-10-04T12:59:17.816Z,1538657957.816 [DataOverHttps](INFO): SBD MOMSN=8610861
2018-10-04T12:59:18.814Z,1538657958.814 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T12:59:18.815Z,1538657958.815 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T12:59:18.815Z,1538657958.815 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T13:01:58.093Z,1538658118.093 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T13:01:58.093Z,1538658118.093 [NAL9602] Data Fault, FailCount= 3
2018-10-04T13:01:58.093Z,1538658118.093 [NAL9602](ERROR): Data Fault
2018-10-04T13:01:58.156Z,1538658118.156 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T13:01:58.499Z,1538658118.499 [NAL9602](INFO): Powering down
2018-10-04T13:01:58.555Z,1538658118.555 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:01:58.555Z,1538658118.555 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-10-04T13:01:58.556Z,1538658118.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:01:58.562Z,1538658118.562 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:01:58.562Z,1538658118.562 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-10-04T13:01:58.562Z,1538658118.562 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:01:58.579Z,1538658118.579 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:01:58.580Z,1538658118.580 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:01:58.948Z,1538658118.948 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:01:58.948Z,1538658118.948 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-10-04T13:01:58.949Z,1538658118.949 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:01:58.949Z,1538658118.949 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-10-04T13:01:59.334Z,1538658119.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:01:59.334Z,1538658119.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:01:59.335Z,1538658119.335 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:01:59.335Z,1538658119.335 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:01:59.335Z,1538658119.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:01:59.336Z,1538658119.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:01:59.369Z,1538658119.369 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T13:01:59.369Z,1538658119.369 [NAL9602] No Fault, FailCount= 3
2018-10-04T13:02:28.687Z,1538658148.687 [NAL9602](INFO): Powering up NAL9602
2018-10-04T13:02:39.491Z,1538658159.491 [NAL9602](INFO): NAL9602 initialized
2018-10-04T13:04:09.844Z,1538658249.844 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T13:04:09.844Z,1538658249.844 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100406090529,35.0, 0.0,1448.9,  0
2018-10-04T13:04:19.035Z,1538658259.035 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T13:04:19.035Z,1538658259.035 [Default:CheckIn:C.Wait] Stopped
2018-10-04T13:04:19.036Z,1538658259.036 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T13:04:19.036Z,1538658259.036 [Default:CheckIn:D] Running Loop=1
2018-10-04T13:04:19.459Z,1538658259.459 [Default:CheckIn:D] Stopped
2018-10-04T13:04:19.459Z,1538658259.459 [Default:CheckIn:E] Running Loop=1
2018-10-04T13:04:19.851Z,1538658259.851 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 527.861523 min 
2018-10-04T13:04:19.852Z,1538658259.852 [Default:CheckIn:E] Stopped
2018-10-04T13:04:19.852Z,1538658259.852 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T13:04:19.852Z,1538658259.852 [Default:CheckIn] Stopped
2018-10-04T13:04:19.852Z,1538658259.852 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T13:04:19.852Z,1538658259.852 [Default:CheckIn](INFO): Running loop #52
2018-10-04T13:04:19.852Z,1538658259.852 [Default:CheckIn] Running Loop=52
2018-10-04T13:04:19.852Z,1538658259.852 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T13:04:19.852Z,1538658259.852 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T13:04:59.528Z,1538658299.528 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:04:59.529Z,1538658299.529 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-10-04T13:04:59.529Z,1538658299.529 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:04:59.531Z,1538658299.531 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:04:59.531Z,1538658299.531 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-10-04T13:04:59.531Z,1538658299.531 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:04:59.545Z,1538658299.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:04:59.546Z,1538658299.546 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:04:59.942Z,1538658299.942 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:04:59.942Z,1538658299.942 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-10-04T13:04:59.942Z,1538658299.942 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:04:59.942Z,1538658299.942 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-10-04T13:05:00.316Z,1538658300.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:05:00.325Z,1538658300.325 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:05:00.325Z,1538658300.325 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:05:00.326Z,1538658300.326 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:05:00.326Z,1538658300.326 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:05:00.327Z,1538658300.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:08:00.331Z,1538658480.331 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:08:00.332Z,1538658480.332 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-10-04T13:08:00.332Z,1538658480.332 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:08:00.338Z,1538658480.338 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:08:00.338Z,1538658480.338 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-10-04T13:08:00.338Z,1538658480.338 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:08:00.364Z,1538658480.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:08:00.364Z,1538658480.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:08:00.760Z,1538658480.760 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:08:00.760Z,1538658480.760 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-10-04T13:08:00.760Z,1538658480.760 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:08:00.760Z,1538658480.760 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-10-04T13:08:01.162Z,1538658481.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:08:01.162Z,1538658481.162 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:08:01.163Z,1538658481.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:08:01.163Z,1538658481.163 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:08:01.163Z,1538658481.163 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:08:01.164Z,1538658481.164 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:09:22.066Z,1538658562.066 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T13:04:19.9Z
2018-10-04T13:09:22.066Z,1538658562.066 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T13:09:22.066Z,1538658562.066 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T13:09:27.013Z,1538658567.013 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0157.lzma
2018-10-04T13:09:27.768Z,1538658567.768 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0157.lzma.bak
2018-10-04T13:09:27.768Z,1538658567.768 [DataOverHttps](INFO): SBD MOMSN=8610865
2018-10-04T13:09:36.953Z,1538658576.953 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0158.lzma
2018-10-04T13:09:37.716Z,1538658577.716 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0158.lzma.bak
2018-10-04T13:09:37.716Z,1538658577.716 [DataOverHttps](INFO): SBD MOMSN=8610867
2018-10-04T13:09:38.667Z,1538658578.667 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T13:09:38.667Z,1538658578.667 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T13:09:38.667Z,1538658578.667 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T13:11:01.491Z,1538658661.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:11:01.491Z,1538658661.491 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-10-04T13:11:01.491Z,1538658661.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:11:01.493Z,1538658661.493 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:11:01.493Z,1538658661.493 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-10-04T13:11:01.493Z,1538658661.493 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:11:01.523Z,1538658661.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:11:01.523Z,1538658661.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:11:01.914Z,1538658661.914 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:11:01.914Z,1538658661.914 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-10-04T13:11:01.915Z,1538658661.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:11:01.915Z,1538658661.915 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-10-04T13:11:02.312Z,1538658662.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:11:02.312Z,1538658662.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:11:02.317Z,1538658662.317 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:11:02.321Z,1538658662.321 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:11:02.322Z,1538658662.322 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:11:02.322Z,1538658662.322 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:12:41.299Z,1538658761.299 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T13:12:41.299Z,1538658761.299 [NAL9602] Data Fault, FailCount= 4
2018-10-04T13:12:41.299Z,1538658761.299 [NAL9602](ERROR): Data Fault
2018-10-04T13:12:41.387Z,1538658761.387 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T13:12:41.695Z,1538658761.695 [NAL9602](INFO): Powering down
2018-10-04T13:12:42.564Z,1538658762.564 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T13:12:42.564Z,1538658762.564 [NAL9602] No Fault, FailCount= 4
2018-10-04T13:13:14.074Z,1538658794.074 [NAL9602](INFO): Powering up NAL9602
2018-10-04T13:13:25.029Z,1538658805.029 [NAL9602](INFO): NAL9602 initialized
2018-10-04T13:14:02.403Z,1538658842.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:14:02.403Z,1538658842.403 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-10-04T13:14:02.403Z,1538658842.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:14:02.409Z,1538658842.409 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:14:02.409Z,1538658842.409 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-10-04T13:14:02.409Z,1538658842.409 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:14:02.427Z,1538658842.427 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:14:02.427Z,1538658842.427 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:14:02.799Z,1538658842.799 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:14:02.799Z,1538658842.799 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-10-04T13:14:02.799Z,1538658842.799 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:14:02.800Z,1538658842.800 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-10-04T13:14:03.187Z,1538658843.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:14:03.188Z,1538658843.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:14:03.188Z,1538658843.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:14:03.201Z,1538658843.201 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:14:03.201Z,1538658843.201 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:14:03.202Z,1538658843.202 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:14:38.905Z,1538658878.905 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T13:14:38.905Z,1538658878.905 [Default:CheckIn:C.Wait] Stopped
2018-10-04T13:14:38.905Z,1538658878.905 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T13:14:38.905Z,1538658878.905 [Default:CheckIn:D] Running Loop=1
2018-10-04T13:14:39.293Z,1538658879.293 [Default:CheckIn:D] Stopped
2018-10-04T13:14:39.293Z,1538658879.293 [Default:CheckIn:E] Running Loop=1
2018-10-04T13:14:39.718Z,1538658879.718 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 538.192090 min 
2018-10-04T13:14:39.718Z,1538658879.718 [Default:CheckIn:E] Stopped
2018-10-04T13:14:39.719Z,1538658879.719 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T13:14:39.719Z,1538658879.719 [Default:CheckIn] Stopped
2018-10-04T13:14:39.719Z,1538658879.719 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T13:14:39.719Z,1538658879.719 [Default:CheckIn](INFO): Running loop #53
2018-10-04T13:14:39.719Z,1538658879.719 [Default:CheckIn] Running Loop=53
2018-10-04T13:14:39.719Z,1538658879.719 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T13:14:39.719Z,1538658879.719 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T13:17:03.451Z,1538659023.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:17:03.451Z,1538659023.451 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-10-04T13:17:03.451Z,1538659023.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:17:03.457Z,1538659023.457 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:17:03.458Z,1538659023.458 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-10-04T13:17:03.458Z,1538659023.458 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:17:03.479Z,1538659023.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:17:03.480Z,1538659023.480 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:17:03.867Z,1538659023.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:17:03.867Z,1538659023.867 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-10-04T13:17:03.867Z,1538659023.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:17:03.867Z,1538659023.867 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-10-04T13:17:04.250Z,1538659024.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:17:04.250Z,1538659024.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:17:04.251Z,1538659024.251 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:17:04.251Z,1538659024.251 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:17:04.251Z,1538659024.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:17:04.252Z,1538659024.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:18:49.822Z,1538659129.822 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T13:18:49.823Z,1538659129.823 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,181004035.0, -0.1,   0.0,1448.9,  0
2018-10-04T13:19:31.160Z,1538659171.160 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T13:19:41.940Z,1538659181.940 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T13:14:39.7Z
2018-10-04T13:19:41.940Z,1538659181.940 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T13:19:41.940Z,1538659181.940 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T13:19:46.880Z,1538659186.880 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0160.lzma
2018-10-04T13:19:47.656Z,1538659187.656 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0160.lzma.bak
2018-10-04T13:19:47.657Z,1538659187.657 [DataOverHttps](INFO): SBD MOMSN=8610871
2018-10-04T13:19:56.832Z,1538659196.832 [DataOverHttps](INFO): Sending 148 bytes from file Logs/20181004T041305/Express0161.lzma
2018-10-04T13:19:57.604Z,1538659197.604 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0161.lzma.bak
2018-10-04T13:19:57.604Z,1538659197.604 [DataOverHttps](INFO): SBD MOMSN=8610873
2018-10-04T13:19:58.554Z,1538659198.554 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T13:19:58.554Z,1538659198.554 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T13:19:58.554Z,1538659198.554 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T13:20:04.591Z,1538659204.591 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:20:04.591Z,1538659204.591 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-10-04T13:20:04.591Z,1538659204.591 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:20:04.593Z,1538659204.593 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:20:04.594Z,1538659204.594 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-10-04T13:20:04.594Z,1538659204.594 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:20:04.608Z,1538659204.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:20:04.609Z,1538659204.609 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:20:05.025Z,1538659205.025 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:20:05.025Z,1538659205.025 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-10-04T13:20:05.026Z,1538659205.026 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:20:05.026Z,1538659205.026 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-10-04T13:20:05.360Z,1538659205.360 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.860, -0.004, 0.000
2018-10-04T13:20:05.370Z,1538659205.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:20:05.370Z,1538659205.370 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:20:05.371Z,1538659205.371 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:20:05.371Z,1538659205.371 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:20:05.372Z,1538659205.372 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:20:05.372Z,1538659205.372 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:23:05.491Z,1538659385.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:23:05.491Z,1538659385.491 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2018-10-04T13:23:05.491Z,1538659385.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:23:05.493Z,1538659385.493 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:23:05.520Z,1538659385.520 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2018-10-04T13:23:05.521Z,1538659385.521 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:23:05.560Z,1538659385.560 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:23:05.560Z,1538659385.560 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:23:05.922Z,1538659385.922 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:23:05.922Z,1538659385.922 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2018-10-04T13:23:05.923Z,1538659385.923 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:23:05.923Z,1538659385.923 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2018-10-04T13:23:06.299Z,1538659386.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:23:06.300Z,1538659386.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:23:06.300Z,1538659386.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:23:06.301Z,1538659386.301 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:23:06.305Z,1538659386.305 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:23:06.306Z,1538659386.306 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:23:28.259Z,1538659408.259 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T13:23:28.259Z,1538659408.259 [NAL9602] Data Fault, FailCount= 5
2018-10-04T13:23:28.259Z,1538659408.259 [NAL9602](ERROR): Data Fault
2018-10-04T13:23:28.349Z,1538659408.349 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T13:23:28.350Z,1538659408.350 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T13:23:28.651Z,1538659408.651 [NAL9602](INFO): Powering down
2018-10-04T13:23:28.718Z,1538659408.718 [CBIT](INFO): Critical error at 20181004T132328
2018-10-04T13:24:58.932Z,1538659498.932 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T13:24:58.934Z,1538659498.934 [Default:CheckIn:C.Wait] Stopped
2018-10-04T13:24:58.934Z,1538659498.934 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T13:24:58.934Z,1538659498.934 [Default:CheckIn:D] Running Loop=1
2018-10-04T13:24:59.344Z,1538659499.344 [Default:CheckIn:D] Stopped
2018-10-04T13:24:59.344Z,1538659499.344 [Default:CheckIn:E] Running Loop=1
2018-10-04T13:24:59.749Z,1538659499.749 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 548.526237 min 
2018-10-04T13:24:59.749Z,1538659499.749 [Default:CheckIn:E] Stopped
2018-10-04T13:24:59.750Z,1538659499.750 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T13:24:59.750Z,1538659499.750 [Default:CheckIn] Stopped
2018-10-04T13:24:59.750Z,1538659499.750 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T13:24:59.750Z,1538659499.750 [Default:CheckIn](INFO): Running loop #54
2018-10-04T13:24:59.750Z,1538659499.750 [Default:CheckIn] Running Loop=54
2018-10-04T13:24:59.750Z,1538659499.750 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T13:24:59.750Z,1538659499.750 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T13:25:28.309Z,1538659528.309 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T13:25:28.309Z,1538659528.309 [NAL9602] No Fault, FailCount= 5
2018-10-04T13:25:28.611Z,1538659528.611 [NAL9602](INFO): Powering up NAL9602
2018-10-04T13:25:39.819Z,1538659539.819 [NAL9602](INFO): NAL9602 initialized
2018-10-04T13:25:56.319Z,1538659556.319 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T13:26:06.343Z,1538659566.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:26:06.343Z,1538659566.343 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2018-10-04T13:26:06.343Z,1538659566.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:26:06.345Z,1538659566.345 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:26:06.345Z,1538659566.345 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2018-10-04T13:26:06.345Z,1538659566.345 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:26:06.378Z,1538659566.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:26:06.379Z,1538659566.379 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:26:06.763Z,1538659566.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:26:06.763Z,1538659566.763 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2018-10-04T13:26:06.764Z,1538659566.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:26:06.764Z,1538659566.764 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2018-10-04T13:26:07.165Z,1538659567.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:26:07.166Z,1538659567.166 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:26:07.166Z,1538659567.166 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:26:07.166Z,1538659567.166 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:26:07.167Z,1538659567.167 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:26:07.167Z,1538659567.167 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:29:07.180Z,1538659747.180 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:29:07.180Z,1538659747.180 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2018-10-04T13:29:07.180Z,1538659747.180 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:29:07.182Z,1538659747.182 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:29:07.182Z,1538659747.182 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2018-10-04T13:29:07.183Z,1538659747.183 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:29:07.212Z,1538659747.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:29:07.212Z,1538659747.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:29:07.594Z,1538659747.594 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:29:07.595Z,1538659747.595 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2018-10-04T13:29:07.595Z,1538659747.595 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:29:07.595Z,1538659747.595 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2018-10-04T13:29:07.950Z,1538659747.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:29:07.950Z,1538659747.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:29:07.950Z,1538659747.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:29:07.951Z,1538659747.951 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:29:07.951Z,1538659747.951 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:29:07.952Z,1538659747.952 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:30:02.116Z,1538659802.116 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T13:24:59.8Z
2018-10-04T13:30:02.116Z,1538659802.116 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T13:30:02.116Z,1538659802.116 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T13:30:07.864Z,1538659807.864 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0163.lzma
2018-10-04T13:30:08.636Z,1538659808.636 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0163.lzma.bak
2018-10-04T13:30:08.636Z,1538659808.636 [DataOverHttps](INFO): SBD MOMSN=8610877
2018-10-04T13:30:17.793Z,1538659817.793 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0164.lzma
2018-10-04T13:30:18.556Z,1538659818.556 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0164.lzma.bak
2018-10-04T13:30:18.556Z,1538659818.556 [DataOverHttps](INFO): SBD MOMSN=8610880
2018-10-04T13:30:19.504Z,1538659819.504 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T13:30:19.504Z,1538659819.504 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T13:30:19.504Z,1538659819.504 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T13:32:08.553Z,1538659928.553 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:32:08.553Z,1538659928.553 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2018-10-04T13:32:08.553Z,1538659928.553 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:32:08.555Z,1538659928.555 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:32:08.555Z,1538659928.555 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2018-10-04T13:32:08.555Z,1538659928.555 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:32:08.569Z,1538659928.569 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:32:08.589Z,1538659928.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:32:08.695Z,1538659928.695 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:32:08.695Z,1538659928.695 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2018-10-04T13:32:08.696Z,1538659928.696 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:32:08.696Z,1538659928.696 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2018-10-04T13:32:09.058Z,1538659929.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:32:09.058Z,1538659929.058 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:32:09.059Z,1538659929.059 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:32:09.059Z,1538659929.059 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:32:09.060Z,1538659929.060 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:32:09.060Z,1538659929.060 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:32:23.436Z,1538659943.436 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T13:32:23.436Z,1538659943.436 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-3276,-32768,-32768,V
2018-10-04T13:35:09.471Z,1538660109.471 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:35:09.471Z,1538660109.471 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2018-10-04T13:35:09.471Z,1538660109.471 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:35:09.477Z,1538660109.477 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:35:09.477Z,1538660109.477 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2018-10-04T13:35:09.477Z,1538660109.477 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:35:09.499Z,1538660109.499 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:35:09.499Z,1538660109.499 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:35:09.862Z,1538660109.862 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:35:09.862Z,1538660109.862 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2018-10-04T13:35:09.863Z,1538660109.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:35:09.863Z,1538660109.863 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2018-10-04T13:35:10.230Z,1538660110.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:35:10.230Z,1538660110.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:35:10.231Z,1538660110.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:35:10.231Z,1538660110.231 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:35:10.231Z,1538660110.231 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:35:10.232Z,1538660110.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:35:19.841Z,1538660119.841 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T13:35:19.845Z,1538660119.845 [Default:CheckIn:C.Wait] Stopped
2018-10-04T13:35:19.845Z,1538660119.845 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T13:35:19.845Z,1538660119.845 [Default:CheckIn:D] Running Loop=1
2018-10-04T13:35:20.241Z,1538660120.241 [Default:CheckIn:D] Stopped
2018-10-04T13:35:20.241Z,1538660120.241 [Default:CheckIn:E] Running Loop=1
2018-10-04T13:35:20.661Z,1538660120.661 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 558.874544 min 
2018-10-04T13:35:20.662Z,1538660120.662 [Default:CheckIn:E] Stopped
2018-10-04T13:35:20.662Z,1538660120.662 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T13:35:20.662Z,1538660120.662 [Default:CheckIn] Stopped
2018-10-04T13:35:20.662Z,1538660120.662 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T13:35:20.662Z,1538660120.662 [Default:CheckIn](INFO): Running loop #55
2018-10-04T13:35:20.662Z,1538660120.662 [Default:CheckIn] Running Loop=55
2018-10-04T13:35:20.662Z,1538660120.662 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T13:35:20.663Z,1538660120.663 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T13:35:23.429Z,1538660123.429 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T13:35:23.430Z,1538660123.430 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-3278,-32768,-32768,V
2018-10-04T13:35:40.672Z,1538660140.672 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T13:35:40.672Z,1538660140.672 [NAL9602] Data Fault, FailCount= 1
2018-10-04T13:35:40.673Z,1538660140.673 [NAL9602](ERROR): Data Fault
2018-10-04T13:35:40.772Z,1538660140.772 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T13:35:41.073Z,1538660141.073 [NAL9602](INFO): Powering down
2018-10-04T13:35:41.932Z,1538660141.932 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T13:35:41.932Z,1538660141.932 [NAL9602] No Fault, FailCount= 1
2018-10-04T13:36:11.459Z,1538660171.459 [NAL9602](INFO): Powering up NAL9602
2018-10-04T13:36:22.479Z,1538660182.479 [NAL9602](INFO): NAL9602 initialized
2018-10-04T13:38:10.481Z,1538660290.481 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:38:10.481Z,1538660290.481 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2018-10-04T13:38:10.481Z,1538660290.481 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:38:10.483Z,1538660290.483 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:38:10.483Z,1538660290.483 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2018-10-04T13:38:10.483Z,1538660290.483 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:38:10.524Z,1538660290.524 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:38:10.525Z,1538660290.525 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:38:10.870Z,1538660290.870 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:38:10.870Z,1538660290.870 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2018-10-04T13:38:10.871Z,1538660290.871 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:38:10.871Z,1538660290.871 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2018-10-04T13:38:11.262Z,1538660291.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:38:11.262Z,1538660291.262 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:38:11.263Z,1538660291.263 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:38:11.263Z,1538660291.263 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:38:11.263Z,1538660291.263 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:38:11.264Z,1538660291.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:40:22.280Z,1538660422.280 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T13:35:20.7Z
2018-10-04T13:40:22.281Z,1538660422.281 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T13:40:22.311Z,1538660422.311 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T13:40:27.257Z,1538660427.257 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0166.lzma
2018-10-04T13:40:28.033Z,1538660428.033 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0166.lzma.bak
2018-10-04T13:40:28.034Z,1538660428.034 [DataOverHttps](INFO): SBD MOMSN=8610884
2018-10-04T13:40:37.299Z,1538660437.299 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0167.lzma
2018-10-04T13:40:38.056Z,1538660438.056 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0167.lzma.bak
2018-10-04T13:40:38.056Z,1538660438.056 [DataOverHttps](INFO): SBD MOMSN=8610886
2018-10-04T13:40:38.985Z,1538660438.985 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T13:40:38.985Z,1538660438.985 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T13:40:38.985Z,1538660438.985 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T13:41:11.599Z,1538660471.599 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:41:11.599Z,1538660471.599 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2018-10-04T13:41:11.599Z,1538660471.599 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:41:11.605Z,1538660471.605 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:41:11.605Z,1538660471.605 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2018-10-04T13:41:11.605Z,1538660471.605 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:41:11.635Z,1538660471.635 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:41:11.636Z,1538660471.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:41:12.004Z,1538660472.004 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:41:12.004Z,1538660472.004 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2018-10-04T13:41:12.004Z,1538660472.004 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:41:12.004Z,1538660472.004 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2018-10-04T13:41:12.415Z,1538660472.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:41:12.416Z,1538660472.416 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:41:12.416Z,1538660472.416 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:41:12.416Z,1538660472.416 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:41:12.421Z,1538660472.421 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:41:12.421Z,1538660472.421 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:44:14.039Z,1538660654.039 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:44:14.039Z,1538660654.039 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2018-10-04T13:44:14.039Z,1538660654.039 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:44:14.042Z,1538660654.042 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:44:14.042Z,1538660654.042 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2018-10-04T13:44:14.042Z,1538660654.042 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:44:14.071Z,1538660654.071 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:44:14.071Z,1538660654.071 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:44:14.179Z,1538660654.179 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:44:14.179Z,1538660654.179 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2018-10-04T13:44:14.180Z,1538660654.180 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:44:14.180Z,1538660654.180 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2018-10-04T13:44:14.542Z,1538660654.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:44:14.542Z,1538660654.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:44:14.543Z,1538660654.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:44:14.543Z,1538660654.543 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:44:14.543Z,1538660654.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:44:14.544Z,1538660654.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:44:15.311Z,1538660655.311 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,34194.67
2018-10-04T13:45:39.140Z,1538660739.140 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T13:45:39.141Z,1538660739.141 [Default:CheckIn:C.Wait] Stopped
2018-10-04T13:45:39.142Z,1538660739.142 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T13:45:39.142Z,1538660739.142 [Default:CheckIn:D] Running Loop=1
2018-10-04T13:45:39.531Z,1538660739.531 [Default:CheckIn:D] Stopped
2018-10-04T13:45:39.531Z,1538660739.531 [Default:CheckIn:E] Running Loop=1
2018-10-04T13:45:39.917Z,1538660739.917 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 569.196029 min 
2018-10-04T13:45:39.917Z,1538660739.917 [Default:CheckIn:E] Stopped
2018-10-04T13:45:39.918Z,1538660739.918 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T13:45:39.918Z,1538660739.918 [Default:CheckIn] Stopped
2018-10-04T13:45:39.918Z,1538660739.918 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T13:45:39.918Z,1538660739.918 [Default:CheckIn](INFO): Running loop #56
2018-10-04T13:45:39.918Z,1538660739.918 [Default:CheckIn] Running Loop=56
2018-10-04T13:45:39.918Z,1538660739.918 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T13:45:39.918Z,1538660739.918 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T13:46:25.591Z,1538660785.591 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T13:46:25.591Z,1538660785.591 [NAL9602] Data Fault, FailCount= 2
2018-10-04T13:46:25.591Z,1538660785.591 [NAL9602](ERROR): Data Fault
2018-10-04T13:46:25.664Z,1538660785.664 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T13:46:25.987Z,1538660785.987 [NAL9602](INFO): Powering down
2018-10-04T13:46:26.840Z,1538660786.840 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T13:46:26.840Z,1538660786.840 [NAL9602] No Fault, FailCount= 2
2018-10-04T13:46:56.339Z,1538660816.339 [NAL9602](INFO): Powering up NAL9602
2018-10-04T13:47:10.319Z,1538660830.319 [NAL9602](INFO): NAL9602 initialized
2018-10-04T13:47:11.267Z,1538660831.267 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T13:47:14.856Z,1538660834.856 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:47:14.856Z,1538660834.856 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2018-10-04T13:47:14.856Z,1538660834.856 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:47:14.858Z,1538660834.858 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:47:14.858Z,1538660834.858 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2018-10-04T13:47:14.858Z,1538660834.858 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:47:14.892Z,1538660834.892 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:47:14.892Z,1538660834.892 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:47:15.310Z,1538660835.310 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:47:15.310Z,1538660835.310 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2018-10-04T13:47:15.311Z,1538660835.311 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:47:15.311Z,1538660835.311 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2018-10-04T13:47:15.660Z,1538660835.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:47:15.660Z,1538660835.660 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:47:15.660Z,1538660835.660 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:47:15.661Z,1538660835.661 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:47:15.661Z,1538660835.661 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:47:15.662Z,1538660835.662 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:48:22.296Z,1538660902.296 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T13:50:15.723Z,1538661015.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:50:15.723Z,1538661015.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2018-10-04T13:50:15.723Z,1538661015.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:50:15.730Z,1538661015.730 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:50:15.730Z,1538661015.730 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2018-10-04T13:50:15.730Z,1538661015.730 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:50:15.755Z,1538661015.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:50:15.756Z,1538661015.756 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:50:16.163Z,1538661016.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:50:16.163Z,1538661016.163 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2018-10-04T13:50:16.163Z,1538661016.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:50:16.164Z,1538661016.164 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2018-10-04T13:50:16.526Z,1538661016.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:50:16.526Z,1538661016.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:50:16.527Z,1538661016.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:50:16.527Z,1538661016.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:50:16.527Z,1538661016.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:50:16.528Z,1538661016.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:50:42.155Z,1538661042.155 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T13:45:39.9Z
2018-10-04T13:50:42.156Z,1538661042.156 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T13:50:42.156Z,1538661042.156 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T13:50:47.136Z,1538661047.136 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0169.lzma
2018-10-04T13:50:47.912Z,1538661047.912 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0169.lzma.bak
2018-10-04T13:50:47.912Z,1538661047.912 [DataOverHttps](INFO): SBD MOMSN=8610890
2018-10-04T13:50:57.056Z,1538661057.056 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0170.lzma
2018-10-04T13:50:57.820Z,1538661057.820 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0170.lzma.bak
2018-10-04T13:50:57.825Z,1538661057.825 [DataOverHttps](INFO): SBD MOMSN=8610892
2018-10-04T13:50:59.843Z,1538661059.843 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T13:50:59.844Z,1538661059.844 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T13:50:59.844Z,1538661059.844 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T13:53:16.863Z,1538661196.863 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:53:16.864Z,1538661196.864 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2018-10-04T13:53:16.864Z,1538661196.864 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:53:16.882Z,1538661196.882 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:53:16.882Z,1538661196.882 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2018-10-04T13:53:16.882Z,1538661196.882 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:53:16.903Z,1538661196.903 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:53:16.904Z,1538661196.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:53:17.308Z,1538661197.308 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:53:17.309Z,1538661197.309 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2018-10-04T13:53:17.313Z,1538661197.313 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:53:17.313Z,1538661197.313 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2018-10-04T13:53:17.687Z,1538661197.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:53:17.688Z,1538661197.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:53:17.688Z,1538661197.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:53:17.689Z,1538661197.689 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:53:17.689Z,1538661197.689 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:53:17.690Z,1538661197.690 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:56:00.104Z,1538661360.104 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T13:56:00.105Z,1538661360.105 [Default:CheckIn:C.Wait] Stopped
2018-10-04T13:56:00.105Z,1538661360.105 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T13:56:00.105Z,1538661360.105 [Default:CheckIn:D] Running Loop=1
2018-10-04T13:56:00.518Z,1538661360.518 [Default:CheckIn:D] Stopped
2018-10-04T13:56:00.519Z,1538661360.519 [Default:CheckIn:E] Running Loop=1
2018-10-04T13:56:00.913Z,1538661360.913 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 579.545833 min 
2018-10-04T13:56:00.913Z,1538661360.913 [Default:CheckIn:E] Stopped
2018-10-04T13:56:00.914Z,1538661360.914 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T13:56:00.914Z,1538661360.914 [Default:CheckIn] Stopped
2018-10-04T13:56:00.914Z,1538661360.914 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T13:56:00.914Z,1538661360.914 [Default:CheckIn](INFO): Running loop #57
2018-10-04T13:56:00.914Z,1538661360.914 [Default:CheckIn] Running Loop=57
2018-10-04T13:56:00.914Z,1538661360.914 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T13:56:00.914Z,1538661360.914 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T13:56:17.736Z,1538661377.736 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:56:17.737Z,1538661377.737 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2018-10-04T13:56:17.745Z,1538661377.745 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:56:17.747Z,1538661377.747 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:56:17.747Z,1538661377.747 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2018-10-04T13:56:17.747Z,1538661377.747 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:56:17.798Z,1538661377.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:56:17.798Z,1538661377.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:56:22.869Z,1538661382.869 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:56:22.869Z,1538661382.869 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2018-10-04T13:56:22.870Z,1538661382.870 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:56:22.870Z,1538661382.870 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2018-10-04T13:56:22.954Z,1538661382.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:56:22.954Z,1538661382.954 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:56:22.955Z,1538661382.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:56:22.955Z,1538661382.955 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:56:22.956Z,1538661382.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:56:22.956Z,1538661382.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:57:13.455Z,1538661433.455 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T13:57:13.455Z,1538661433.455 [NAL9602] Data Fault, FailCount= 3
2018-10-04T13:57:13.455Z,1538661433.455 [NAL9602](ERROR): Data Fault
2018-10-04T13:57:13.516Z,1538661433.516 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T13:57:13.851Z,1538661433.851 [NAL9602](INFO): Powering down
2018-10-04T13:57:14.724Z,1538661434.724 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T13:57:14.724Z,1538661434.724 [NAL9602] No Fault, FailCount= 3
2018-10-04T13:57:43.964Z,1538661463.964 [NAL9602](INFO): Powering up NAL9602
2018-10-04T13:57:54.763Z,1538661474.763 [NAL9602](INFO): NAL9602 initialized
2018-10-04T13:59:23.207Z,1538661563.207 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:59:23.207Z,1538661563.207 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2018-10-04T13:59:23.207Z,1538661563.207 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T13:59:23.209Z,1538661563.209 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T13:59:23.209Z,1538661563.209 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2018-10-04T13:59:23.209Z,1538661563.209 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T13:59:23.240Z,1538661563.240 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T13:59:23.241Z,1538661563.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T13:59:23.599Z,1538661563.599 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T13:59:23.599Z,1538661563.599 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2018-10-04T13:59:23.600Z,1538661563.600 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T13:59:23.600Z,1538661563.600 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2018-10-04T13:59:23.975Z,1538661563.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T13:59:23.976Z,1538661563.976 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:59:23.976Z,1538661563.976 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T13:59:23.981Z,1538661563.981 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T13:59:23.982Z,1538661563.982 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T13:59:23.983Z,1538661563.983 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:01:03.370Z,1538661663.370 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T13:56:00.9Z
2018-10-04T14:01:03.370Z,1538661663.370 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T14:01:03.370Z,1538661663.370 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T14:01:08.271Z,1538661668.271 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0172.lzma
2018-10-04T14:01:09.067Z,1538661669.067 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0172.lzma.bak
2018-10-04T14:01:09.067Z,1538661669.067 [DataOverHttps](INFO): SBD MOMSN=8610896
2018-10-04T14:01:18.303Z,1538661678.303 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0173.lzma
2018-10-04T14:01:19.065Z,1538661679.065 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0173.lzma.bak
2018-10-04T14:01:19.065Z,1538661679.065 [DataOverHttps](INFO): SBD MOMSN=8610898
2018-10-04T14:01:20.654Z,1538661680.654 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T14:01:20.654Z,1538661680.654 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T14:01:20.655Z,1538661680.655 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T14:02:24.086Z,1538661744.086 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:02:24.086Z,1538661744.086 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2018-10-04T14:02:24.086Z,1538661744.086 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:02:24.088Z,1538661744.088 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:02:24.088Z,1538661744.088 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2018-10-04T14:02:24.088Z,1538661744.088 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:02:24.119Z,1538661744.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:02:24.119Z,1538661744.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:02:24.486Z,1538661744.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:02:24.486Z,1538661744.486 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2018-10-04T14:02:24.487Z,1538661744.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:02:24.487Z,1538661744.487 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2018-10-04T14:02:24.874Z,1538661744.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:02:24.874Z,1538661744.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:02:24.875Z,1538661744.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:02:24.875Z,1538661744.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:02:24.875Z,1538661744.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:02:24.876Z,1538661744.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:05:25.254Z,1538661925.254 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:05:25.254Z,1538661925.254 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2018-10-04T14:05:25.254Z,1538661925.254 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:05:25.266Z,1538661925.266 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:05:25.266Z,1538661925.266 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2018-10-04T14:05:25.266Z,1538661925.266 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:05:25.279Z,1538661925.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:05:25.279Z,1538661925.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:05:25.658Z,1538661925.658 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:05:25.658Z,1538661925.658 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2018-10-04T14:05:25.659Z,1538661925.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:05:25.659Z,1538661925.659 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2018-10-04T14:05:26.064Z,1538661926.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:05:26.064Z,1538661926.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:05:26.064Z,1538661926.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:05:26.065Z,1538661926.065 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:05:26.066Z,1538661926.066 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:05:26.066Z,1538661926.066 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:06:21.024Z,1538661981.024 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T14:06:21.029Z,1538661981.029 [Default:CheckIn:C.Wait] Stopped
2018-10-04T14:06:21.029Z,1538661981.029 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T14:06:21.029Z,1538661981.029 [Default:CheckIn:D] Running Loop=1
2018-10-04T14:06:21.401Z,1538661981.401 [Default:CheckIn:D] Stopped
2018-10-04T14:06:21.402Z,1538661981.402 [Default:CheckIn:E] Running Loop=1
2018-10-04T14:06:21.813Z,1538661981.813 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 589.893880 min 
2018-10-04T14:06:21.813Z,1538661981.813 [Default:CheckIn:E] Stopped
2018-10-04T14:06:21.814Z,1538661981.814 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T14:06:21.814Z,1538661981.814 [Default:CheckIn] Stopped
2018-10-04T14:06:21.814Z,1538661981.814 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T14:06:21.814Z,1538661981.814 [Default:CheckIn](INFO): Running loop #58
2018-10-04T14:06:21.814Z,1538661981.814 [Default:CheckIn] Running Loop=58
2018-10-04T14:06:21.814Z,1538661981.814 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T14:06:21.814Z,1538661981.814 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T14:07:55.615Z,1538662075.615 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T14:07:55.615Z,1538662075.615 [NAL9602] Data Fault, FailCount= 4
2018-10-04T14:07:55.615Z,1538662075.615 [NAL9602](ERROR): Data Fault
2018-10-04T14:07:55.696Z,1538662075.696 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T14:07:56.041Z,1538662076.041 [NAL9602](INFO): Powering down
2018-10-04T14:07:56.872Z,1538662076.872 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T14:07:56.872Z,1538662076.872 [NAL9602] No Fault, FailCount= 4
2018-10-04T14:08:27.583Z,1538662107.583 [NAL9602](INFO): Powering up NAL9602
2018-10-04T14:08:27.645Z,1538662107.645 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:08:27.645Z,1538662107.645 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2018-10-04T14:08:27.645Z,1538662107.645 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:08:27.647Z,1538662107.647 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:08:27.647Z,1538662107.647 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2018-10-04T14:08:27.647Z,1538662107.647 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:08:27.660Z,1538662107.660 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:08:27.661Z,1538662107.661 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:08:27.783Z,1538662107.783 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:08:27.783Z,1538662107.783 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2018-10-04T14:08:27.784Z,1538662107.784 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:08:27.784Z,1538662107.784 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2018-10-04T14:08:28.147Z,1538662108.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:08:28.148Z,1538662108.148 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:08:28.153Z,1538662108.153 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:08:28.154Z,1538662108.154 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:08:28.155Z,1538662108.155 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:08:28.156Z,1538662108.156 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:08:38.499Z,1538662118.499 [NAL9602](INFO): NAL9602 initialized
2018-10-04T14:11:25.460Z,1538662285.460 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T14:06:21.8Z
2018-10-04T14:11:25.460Z,1538662285.460 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T14:11:25.460Z,1538662285.460 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T14:11:33.379Z,1538662293.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:11:33.380Z,1538662293.380 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2018-10-04T14:11:33.380Z,1538662293.380 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:11:33.386Z,1538662293.386 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:11:33.386Z,1538662293.386 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2018-10-04T14:11:33.386Z,1538662293.386 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:11:33.424Z,1538662293.424 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:11:33.424Z,1538662293.424 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:11:33.493Z,1538662293.493 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0175.lzma
2018-10-04T14:11:33.632Z,1538662293.632 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:11:33.632Z,1538662293.632 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2018-10-04T14:11:33.633Z,1538662293.633 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:11:33.641Z,1538662293.641 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2018-10-04T14:11:33.898Z,1538662293.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:11:33.898Z,1538662293.898 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:11:33.899Z,1538662293.899 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:11:33.899Z,1538662293.899 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:11:33.899Z,1538662293.899 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:11:33.900Z,1538662293.900 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:11:34.249Z,1538662294.249 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0175.lzma.bak
2018-10-04T14:11:34.249Z,1538662294.249 [DataOverHttps](INFO): SBD MOMSN=8610902
2018-10-04T14:11:43.648Z,1538662303.648 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0176.lzma
2018-10-04T14:11:44.409Z,1538662304.409 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0176.lzma.bak
2018-10-04T14:11:44.409Z,1538662304.409 [DataOverHttps](INFO): SBD MOMSN=8610904
2018-10-04T14:11:45.363Z,1538662305.363 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T14:11:45.363Z,1538662305.363 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T14:11:45.364Z,1538662305.364 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T14:13:36.262Z,1538662416.262 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.847, -0.006, 0.000
2018-10-04T14:14:33.931Z,1538662473.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:14:33.932Z,1538662473.931 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2018-10-04T14:14:33.932Z,1538662473.932 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:14:33.954Z,1538662473.954 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:14:33.954Z,1538662473.954 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2018-10-04T14:14:33.954Z,1538662473.954 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:14:33.999Z,1538662473.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:14:33.999Z,1538662473.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:14:34.362Z,1538662474.362 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:14:34.362Z,1538662474.362 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2018-10-04T14:14:34.363Z,1538662474.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:14:34.363Z,1538662474.363 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2018-10-04T14:14:34.723Z,1538662474.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:14:34.724Z,1538662474.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:14:34.724Z,1538662474.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:14:34.725Z,1538662474.725 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:14:34.725Z,1538662474.725 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:14:34.725Z,1538662474.725 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:15:25.376Z,1538662525.376 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T14:15:25.376Z,1538662525.376 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-3278,V
2018-10-04T14:16:45.820Z,1538662605.820 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T14:16:45.820Z,1538662605.820 [Default:CheckIn:C.Wait] Stopped
2018-10-04T14:16:45.820Z,1538662605.820 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T14:16:45.820Z,1538662605.820 [Default:CheckIn:D] Running Loop=1
2018-10-04T14:16:46.241Z,1538662606.241 [Default:CheckIn:D] Stopped
2018-10-04T14:16:46.241Z,1538662606.241 [Default:CheckIn:E] Running Loop=1
2018-10-04T14:16:46.598Z,1538662606.598 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 600.307812 min 
2018-10-04T14:16:46.598Z,1538662606.598 [Default:CheckIn:E] Stopped
2018-10-04T14:16:46.598Z,1538662606.598 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T14:16:46.599Z,1538662606.599 [Default:CheckIn] Stopped
2018-10-04T14:16:46.599Z,1538662606.599 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T14:16:46.599Z,1538662606.599 [Default:CheckIn](INFO): Running loop #59
2018-10-04T14:16:46.599Z,1538662606.599 [Default:CheckIn] Running Loop=59
2018-10-04T14:16:46.599Z,1538662606.599 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T14:16:46.599Z,1538662606.599 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T14:17:35.138Z,1538662655.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:17:35.139Z,1538662655.139 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2018-10-04T14:17:35.139Z,1538662655.139 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:17:35.140Z,1538662655.140 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:17:35.141Z,1538662655.141 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2018-10-04T14:17:35.141Z,1538662655.141 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:17:35.170Z,1538662655.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:17:35.170Z,1538662655.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:17:35.555Z,1538662655.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:17:35.556Z,1538662655.556 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2018-10-04T14:17:35.556Z,1538662655.556 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:17:35.556Z,1538662655.556 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2018-10-04T14:17:35.935Z,1538662655.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:17:35.935Z,1538662655.935 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:17:35.935Z,1538662655.935 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:17:35.936Z,1538662655.936 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:17:35.936Z,1538662655.936 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:17:35.937Z,1538662655.937 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:18:01.398Z,1538662681.398 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.894, -0.013, 0.000
2018-10-04T14:18:40.199Z,1538662720.199 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T14:18:40.199Z,1538662720.199 [NAL9602] Data Fault, FailCount= 5
2018-10-04T14:18:40.199Z,1538662720.199 [NAL9602](ERROR): Data Fault
2018-10-04T14:18:40.276Z,1538662720.276 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T14:18:40.276Z,1538662720.276 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T14:18:40.599Z,1538662720.599 [NAL9602](INFO): Powering down
2018-10-04T14:18:40.684Z,1538662720.684 [CBIT](INFO): Critical error at 20181004T141840
2018-10-04T14:20:38.087Z,1538662838.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:20:38.088Z,1538662838.088 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2018-10-04T14:20:38.088Z,1538662838.088 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:20:38.089Z,1538662838.089 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:20:38.090Z,1538662838.090 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2018-10-04T14:20:38.090Z,1538662838.090 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:20:38.103Z,1538662838.103 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:20:38.103Z,1538662838.103 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:20:38.341Z,1538662838.341 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:20:38.345Z,1538662838.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2018-10-04T14:20:38.345Z,1538662838.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:20:38.345Z,1538662838.345 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2018-10-04T14:20:38.598Z,1538662838.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:20:38.599Z,1538662838.599 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:20:38.599Z,1538662838.599 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:20:38.600Z,1538662838.600 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:20:38.600Z,1538662838.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:20:38.600Z,1538662838.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:20:40.600Z,1538662840.600 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T14:20:40.600Z,1538662840.600 [NAL9602] No Fault, FailCount= 5
2018-10-04T14:20:40.923Z,1538662840.923 [NAL9602](INFO): Powering up NAL9602
2018-10-04T14:20:52.123Z,1538662852.123 [NAL9602](INFO): NAL9602 initialized
2018-10-04T14:21:48.692Z,1538662908.692 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T14:16:46.6Z
2018-10-04T14:21:48.692Z,1538662908.692 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T14:21:48.692Z,1538662908.692 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T14:21:53.629Z,1538662913.629 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0178.lzma
2018-10-04T14:21:54.400Z,1538662914.400 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0178.lzma.bak
2018-10-04T14:21:54.400Z,1538662914.400 [DataOverHttps](INFO): SBD MOMSN=8610908
2018-10-04T14:22:05.710Z,1538662925.710 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0179.lzma
2018-10-04T14:22:07.370Z,1538662927.370 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0179.lzma.bak
2018-10-04T14:22:07.370Z,1538662927.370 [DataOverHttps](INFO): SBD MOMSN=8610911
2018-10-04T14:22:08.080Z,1538662928.080 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T14:22:08.081Z,1538662928.081 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T14:22:08.081Z,1538662928.081 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T14:23:38.631Z,1538663018.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:23:38.631Z,1538663018.631 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2018-10-04T14:23:38.631Z,1538663018.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:23:38.633Z,1538663018.633 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:23:38.633Z,1538663018.633 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2018-10-04T14:23:38.633Z,1538663018.633 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:23:38.682Z,1538663018.682 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:23:38.682Z,1538663018.682 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:23:39.043Z,1538663019.043 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:23:39.043Z,1538663019.043 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2018-10-04T14:23:39.044Z,1538663019.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:23:39.044Z,1538663019.044 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2018-10-04T14:23:39.428Z,1538663019.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:23:39.428Z,1538663019.428 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:23:39.429Z,1538663019.429 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:23:39.429Z,1538663019.429 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:23:39.430Z,1538663019.430 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:23:39.430Z,1538663019.430 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:26:39.658Z,1538663199.658 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:26:39.658Z,1538663199.658 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2018-10-04T14:26:39.658Z,1538663199.658 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:26:39.660Z,1538663199.660 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:26:39.660Z,1538663199.660 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2018-10-04T14:26:39.660Z,1538663199.660 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:26:39.674Z,1538663199.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:26:39.674Z,1538663199.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:26:40.075Z,1538663200.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:26:40.075Z,1538663200.075 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2018-10-04T14:26:40.076Z,1538663200.076 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:26:40.076Z,1538663200.076 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2018-10-04T14:26:40.529Z,1538663200.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:26:40.530Z,1538663200.530 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:26:40.530Z,1538663200.530 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:26:40.531Z,1538663200.531 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:26:40.531Z,1538663200.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:26:40.531Z,1538663200.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:27:01.835Z,1538663221.835 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T14:27:08.275Z,1538663228.275 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T14:27:08.275Z,1538663228.275 [Default:CheckIn:C.Wait] Stopped
2018-10-04T14:27:08.275Z,1538663228.275 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T14:27:08.275Z,1538663228.275 [Default:CheckIn:D] Running Loop=1
2018-10-04T14:27:08.661Z,1538663228.661 [Default:CheckIn:D] Stopped
2018-10-04T14:27:08.661Z,1538663228.661 [Default:CheckIn:E] Running Loop=1
2018-10-04T14:27:09.053Z,1538663229.053 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 610.681380 min 
2018-10-04T14:27:09.053Z,1538663229.053 [Default:CheckIn:E] Stopped
2018-10-04T14:27:09.053Z,1538663229.053 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T14:27:09.054Z,1538663229.054 [Default:CheckIn] Stopped
2018-10-04T14:27:09.054Z,1538663229.054 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T14:27:09.054Z,1538663229.054 [Default:CheckIn](INFO): Running loop #60
2018-10-04T14:27:09.054Z,1538663229.054 [Default:CheckIn] Running Loop=60
2018-10-04T14:27:09.054Z,1538663229.054 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T14:27:09.054Z,1538663229.054 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T14:29:40.663Z,1538663380.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:29:40.663Z,1538663380.663 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2018-10-04T14:29:40.663Z,1538663380.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:29:40.665Z,1538663380.665 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:29:40.666Z,1538663380.666 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2018-10-04T14:29:40.666Z,1538663380.666 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:29:40.691Z,1538663380.691 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:29:40.691Z,1538663380.691 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:29:41.093Z,1538663381.093 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:29:41.093Z,1538663381.093 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2018-10-04T14:29:41.094Z,1538663381.094 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:29:41.094Z,1538663381.094 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2018-10-04T14:29:41.455Z,1538663381.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:29:41.456Z,1538663381.456 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:29:41.456Z,1538663381.456 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:29:41.456Z,1538663381.456 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:29:41.457Z,1538663381.457 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:29:41.457Z,1538663381.457 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:30:54.351Z,1538663454.351 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T14:30:54.351Z,1538663454.351 [NAL9602] Data Fault, FailCount= 1
2018-10-04T14:30:54.351Z,1538663454.351 [NAL9602](ERROR): Data Fault
2018-10-04T14:30:54.412Z,1538663454.412 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T14:30:54.743Z,1538663454.743 [NAL9602](INFO): Powering down
2018-10-04T14:30:55.612Z,1538663455.612 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T14:30:55.612Z,1538663455.612 [NAL9602] No Fault, FailCount= 1
2018-10-04T14:31:24.827Z,1538663484.827 [NAL9602](INFO): Powering up NAL9602
2018-10-04T14:31:37.203Z,1538663497.203 [NAL9602](INFO): NAL9602 initialized
2018-10-04T14:32:11.603Z,1538663531.603 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T14:27:09.1Z
2018-10-04T14:32:11.603Z,1538663531.603 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T14:32:11.603Z,1538663531.603 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T14:32:16.544Z,1538663536.544 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0181.lzma
2018-10-04T14:32:17.324Z,1538663537.324 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0181.lzma.bak
2018-10-04T14:32:17.324Z,1538663537.324 [DataOverHttps](INFO): SBD MOMSN=8610915
2018-10-04T14:32:26.538Z,1538663546.538 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0182.lzma
2018-10-04T14:32:27.284Z,1538663547.284 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0182.lzma.bak
2018-10-04T14:32:27.284Z,1538663547.284 [DataOverHttps](INFO): SBD MOMSN=8610917
2018-10-04T14:32:28.251Z,1538663548.251 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T14:32:28.251Z,1538663548.251 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T14:32:28.251Z,1538663548.251 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T14:32:41.647Z,1538663561.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:32:41.647Z,1538663561.647 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2018-10-04T14:32:41.647Z,1538663561.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:32:41.653Z,1538663561.653 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:32:41.653Z,1538663561.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2018-10-04T14:32:41.654Z,1538663561.654 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:32:41.683Z,1538663561.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:32:41.684Z,1538663561.684 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:32:41.684Z,1538663561.684 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:32:41.684Z,1538663561.684 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:37:28.521Z,1538663848.521 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T14:37:28.521Z,1538663848.521 [Default:CheckIn:C.Wait] Stopped
2018-10-04T14:37:28.521Z,1538663848.521 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T14:37:28.521Z,1538663848.521 [Default:CheckIn:D] Running Loop=1
2018-10-04T14:37:28.911Z,1538663848.911 [Default:CheckIn:D] Stopped
2018-10-04T14:37:28.911Z,1538663848.911 [Default:CheckIn:E] Running Loop=1
2018-10-04T14:37:29.338Z,1538663849.338 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 621.019076 min 
2018-10-04T14:37:29.338Z,1538663849.338 [Default:CheckIn:E] Stopped
2018-10-04T14:37:29.338Z,1538663849.338 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T14:37:29.339Z,1538663849.339 [Default:CheckIn] Stopped
2018-10-04T14:37:29.339Z,1538663849.339 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T14:37:29.339Z,1538663849.339 [Default:CheckIn](INFO): Running loop #61
2018-10-04T14:37:29.339Z,1538663849.339 [Default:CheckIn] Running Loop=61
2018-10-04T14:37:29.339Z,1538663849.339 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T14:37:29.339Z,1538663849.339 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T14:41:39.611Z,1538664099.611 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T14:41:39.611Z,1538664099.611 [NAL9602] Data Fault, FailCount= 2
2018-10-04T14:41:39.611Z,1538664099.611 [NAL9602](ERROR): Data Fault
2018-10-04T14:41:39.703Z,1538664099.703 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T14:41:40.007Z,1538664100.007 [NAL9602](INFO): Powering down
2018-10-04T14:41:40.869Z,1538664100.869 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T14:41:40.869Z,1538664100.869 [NAL9602] No Fault, FailCount= 2
2018-10-04T14:42:10.123Z,1538664130.123 [NAL9602](INFO): Powering up NAL9602
2018-10-04T14:42:21.327Z,1538664141.327 [NAL9602](INFO): NAL9602 initialized
2018-10-04T14:42:30.982Z,1538664150.982 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T14:37:29.3Z
2018-10-04T14:42:30.982Z,1538664150.982 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T14:42:30.982Z,1538664150.982 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T14:42:32.237Z,1538664152.237 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.847, -0.015, 0.000
2018-10-04T14:42:35.889Z,1538664155.889 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0184.lzma
2018-10-04T14:42:36.673Z,1538664156.673 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0184.lzma.bak
2018-10-04T14:42:36.674Z,1538664156.674 [DataOverHttps](INFO): SBD MOMSN=8610921
2018-10-04T14:42:45.886Z,1538664165.886 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20181004T041305/Express0185.lzma
2018-10-04T14:42:46.660Z,1538664166.660 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0185.lzma.bak
2018-10-04T14:42:46.660Z,1538664166.660 [DataOverHttps](INFO): SBD MOMSN=8610923
2018-10-04T14:42:47.589Z,1538664167.589 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T14:42:47.590Z,1538664167.590 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T14:42:47.590Z,1538664167.590 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T14:47:41.650Z,1538664461.650 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:47:41.650Z,1538664461.650 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2018-10-04T14:47:42.039Z,1538664462.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:47:42.040Z,1538664462.040 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:47:42.040Z,1538664462.040 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:47:42.066Z,1538664462.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:47:42.066Z,1538664462.066 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2018-10-04T14:47:42.423Z,1538664462.423 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:47:42.424Z,1538664462.424 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:47:42.424Z,1538664462.424 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:47:48.037Z,1538664468.037 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T14:47:48.037Z,1538664468.037 [Default:CheckIn:C.Wait] Stopped
2018-10-04T14:47:48.037Z,1538664468.037 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T14:47:48.037Z,1538664468.037 [Default:CheckIn:D] Running Loop=1
2018-10-04T14:47:48.444Z,1538664468.444 [Default:CheckIn:D] Stopped
2018-10-04T14:47:48.445Z,1538664468.445 [Default:CheckIn:E] Running Loop=1
2018-10-04T14:47:48.819Z,1538664468.819 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 631.344596 min 
2018-10-04T14:47:48.819Z,1538664468.819 [Default:CheckIn:E] Stopped
2018-10-04T14:47:48.819Z,1538664468.819 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T14:47:48.820Z,1538664468.820 [Default:CheckIn] Stopped
2018-10-04T14:47:48.820Z,1538664468.820 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T14:47:48.820Z,1538664468.820 [Default:CheckIn](INFO): Running loop #62
2018-10-04T14:47:48.820Z,1538664468.820 [Default:CheckIn] Running Loop=62
2018-10-04T14:47:48.820Z,1538664468.820 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T14:47:48.820Z,1538664468.820 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T14:50:42.233Z,1538664642.233 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:50:42.233Z,1538664642.233 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-10-04T14:50:42.233Z,1538664642.233 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:50:42.252Z,1538664642.252 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:50:42.611Z,1538664642.611 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:50:42.611Z,1538664642.611 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-04T14:50:42.611Z,1538664642.611 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:50:42.637Z,1538664642.637 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:50:42.641Z,1538664642.641 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-10-04T14:50:42.642Z,1538664642.642 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:50:43.025Z,1538664643.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:50:43.026Z,1538664643.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:50:43.026Z,1538664643.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:50:43.058Z,1538664643.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:50:43.058Z,1538664643.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-04T14:50:43.403Z,1538664643.403 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:50:43.403Z,1538664643.403 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:50:43.404Z,1538664643.404 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:52:24.467Z,1538664744.467 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T14:52:24.467Z,1538664744.467 [NAL9602] Data Fault, FailCount= 3
2018-10-04T14:52:24.467Z,1538664744.467 [NAL9602](ERROR): Data Fault
2018-10-04T14:52:24.549Z,1538664744.549 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T14:52:24.863Z,1538664744.863 [NAL9602](INFO): Powering down
2018-10-04T14:52:25.724Z,1538664745.724 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T14:52:25.724Z,1538664745.724 [NAL9602] No Fault, FailCount= 3
2018-10-04T14:52:51.303Z,1538664771.303 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T14:47:48.8Z
2018-10-04T14:52:51.303Z,1538664771.303 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T14:52:51.303Z,1538664771.303 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T14:52:56.131Z,1538664776.131 [NAL9602](INFO): Powering up NAL9602
2018-10-04T14:52:56.285Z,1538664776.285 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0187.lzma
2018-10-04T14:52:57.052Z,1538664777.052 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0187.lzma.bak
2018-10-04T14:52:57.052Z,1538664777.052 [DataOverHttps](INFO): SBD MOMSN=8610929
2018-10-04T14:53:10.224Z,1538664790.224 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0188.lzma
2018-10-04T14:53:10.455Z,1538664790.455 [NAL9602](INFO): NAL9602 initialized
2018-10-04T14:53:10.817Z,1538664790.817 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0188.lzma.bak
2018-10-04T14:53:10.817Z,1538664790.817 [DataOverHttps](INFO): SBD MOMSN=8610931
2018-10-04T14:53:11.758Z,1538664791.758 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T14:53:11.759Z,1538664791.759 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T14:53:11.759Z,1538664791.759 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T14:53:43.224Z,1538664823.224 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:53:43.224Z,1538664823.224 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-10-04T14:53:43.224Z,1538664823.224 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:53:43.333Z,1538664823.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:53:43.535Z,1538664823.535 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:53:43.535Z,1538664823.535 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-04T14:53:43.535Z,1538664823.535 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:53:43.603Z,1538664823.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:53:43.603Z,1538664823.603 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-10-04T14:53:43.603Z,1538664823.603 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:53:43.960Z,1538664823.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:53:43.960Z,1538664823.960 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:53:43.961Z,1538664823.961 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:53:43.974Z,1538664823.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:53:43.974Z,1538664823.974 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-04T14:53:44.355Z,1538664824.355 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:53:44.355Z,1538664824.355 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:53:44.356Z,1538664824.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:56:47.498Z,1538665007.498 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:56:47.499Z,1538665007.499 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-10-04T14:56:47.499Z,1538665007.499 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:56:47.500Z,1538665007.500 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:56:47.501Z,1538665007.501 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-04T14:56:47.501Z,1538665007.501 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:56:47.514Z,1538665007.514 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:56:47.514Z,1538665007.514 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:56:47.666Z,1538665007.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:56:47.666Z,1538665007.666 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-10-04T14:56:47.667Z,1538665007.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:56:47.667Z,1538665007.667 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-04T14:56:47.978Z,1538665007.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:56:47.978Z,1538665007.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:56:47.979Z,1538665007.979 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:56:47.979Z,1538665007.979 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:56:47.979Z,1538665007.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:56:47.980Z,1538665007.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:58:12.196Z,1538665092.196 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T14:58:12.196Z,1538665092.196 [Default:CheckIn:C.Wait] Stopped
2018-10-04T14:58:12.196Z,1538665092.196 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T14:58:12.197Z,1538665092.197 [Default:CheckIn:D] Running Loop=1
2018-10-04T14:58:12.589Z,1538665092.589 [Default:CheckIn:D] Stopped
2018-10-04T14:58:12.589Z,1538665092.589 [Default:CheckIn:E] Running Loop=1
2018-10-04T14:58:13.011Z,1538665093.011 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 641.747005 min 
2018-10-04T14:58:13.011Z,1538665093.011 [Default:CheckIn:E] Stopped
2018-10-04T14:58:13.012Z,1538665093.012 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T14:58:13.012Z,1538665093.012 [Default:CheckIn] Stopped
2018-10-04T14:58:13.012Z,1538665093.012 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T14:58:13.012Z,1538665093.012 [Default:CheckIn](INFO): Running loop #63
2018-10-04T14:58:13.012Z,1538665093.012 [Default:CheckIn] Running Loop=63
2018-10-04T14:58:13.012Z,1538665093.012 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T14:58:13.012Z,1538665093.012 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T14:59:48.039Z,1538665188.039 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:59:48.039Z,1538665188.039 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-10-04T14:59:48.039Z,1538665188.039 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T14:59:48.045Z,1538665188.045 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T14:59:48.045Z,1538665188.045 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-04T14:59:48.045Z,1538665188.045 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T14:59:48.098Z,1538665188.098 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T14:59:48.098Z,1538665188.098 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T14:59:48.487Z,1538665188.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T14:59:48.487Z,1538665188.487 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-10-04T14:59:48.488Z,1538665188.488 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T14:59:48.488Z,1538665188.488 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-04T14:59:48.842Z,1538665188.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T14:59:48.842Z,1538665188.842 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:59:48.843Z,1538665188.843 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T14:59:48.843Z,1538665188.843 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T14:59:48.843Z,1538665188.843 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T14:59:48.844Z,1538665188.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:02:48.866Z,1538665368.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:02:48.866Z,1538665368.866 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-10-04T15:02:48.866Z,1538665368.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:02:48.868Z,1538665368.868 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:02:48.868Z,1538665368.868 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-04T15:02:48.868Z,1538665368.868 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:02:48.896Z,1538665368.896 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:02:48.897Z,1538665368.897 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:02:49.302Z,1538665369.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:02:49.302Z,1538665369.302 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-10-04T15:02:49.303Z,1538665369.303 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:02:49.303Z,1538665369.303 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-04T15:02:49.680Z,1538665369.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:02:49.685Z,1538665369.685 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:02:49.686Z,1538665369.686 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:02:49.686Z,1538665369.686 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:02:49.686Z,1538665369.686 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:02:49.687Z,1538665369.687 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:03:14.793Z,1538665394.793 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T15:03:14.793Z,1538665394.793 [NAL9602] Data Fault, FailCount= 4
2018-10-04T15:03:14.793Z,1538665394.793 [NAL9602](ERROR): Data Fault
2018-10-04T15:03:14.860Z,1538665394.860 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T14:58:13.0Z
2018-10-04T15:03:14.860Z,1538665394.860 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T15:03:14.861Z,1538665394.861 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T15:03:14.885Z,1538665394.885 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T15:03:14.955Z,1538665394.955 [NAL9602](INFO): Powering down
2018-10-04T15:03:15.756Z,1538665395.756 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T15:03:15.756Z,1538665395.756 [NAL9602] No Fault, FailCount= 4
2018-10-04T15:03:19.768Z,1538665399.768 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0190.lzma
2018-10-04T15:03:20.564Z,1538665400.564 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0190.lzma.bak
2018-10-04T15:03:20.565Z,1538665400.565 [DataOverHttps](INFO): SBD MOMSN=8610935
2018-10-04T15:03:30.916Z,1538665410.916 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0191.lzma
2018-10-04T15:03:32.403Z,1538665412.403 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0191.lzma.bak
2018-10-04T15:03:32.403Z,1538665412.403 [DataOverHttps](INFO): SBD MOMSN=8610937
2018-10-04T15:03:33.354Z,1538665413.354 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T15:03:33.354Z,1538665413.354 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T15:03:33.354Z,1538665413.354 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T15:03:45.081Z,1538665425.081 [NAL9602](INFO): Powering up NAL9602
2018-10-04T15:03:55.883Z,1538665435.883 [NAL9602](INFO): NAL9602 initialized
2018-10-04T15:05:50.067Z,1538665550.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:05:50.067Z,1538665550.067 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-10-04T15:05:50.067Z,1538665550.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:05:50.069Z,1538665550.069 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:05:50.069Z,1538665550.069 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-04T15:05:50.069Z,1538665550.069 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:05:50.083Z,1538665550.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:05:50.083Z,1538665550.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:05:50.486Z,1538665550.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:05:50.486Z,1538665550.486 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-10-04T15:05:50.487Z,1538665550.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:05:50.487Z,1538665550.487 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-04T15:05:50.851Z,1538665550.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:05:50.851Z,1538665550.851 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:05:50.852Z,1538665550.852 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:05:50.852Z,1538665550.852 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:05:50.852Z,1538665550.852 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:05:50.853Z,1538665550.853 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:05:59.383Z,1538665559.383 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,39079.51
2018-10-04T15:08:33.832Z,1538665713.832 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T15:08:33.837Z,1538665713.837 [Default:CheckIn:C.Wait] Stopped
2018-10-04T15:08:33.837Z,1538665713.837 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T15:08:33.837Z,1538665713.837 [Default:CheckIn:D] Running Loop=1
2018-10-04T15:08:34.253Z,1538665714.253 [Default:CheckIn:D] Stopped
2018-10-04T15:08:34.253Z,1538665714.253 [Default:CheckIn:E] Running Loop=1
2018-10-04T15:08:34.637Z,1538665714.637 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 652.108073 min 
2018-10-04T15:08:34.637Z,1538665714.637 [Default:CheckIn:E] Stopped
2018-10-04T15:08:34.637Z,1538665714.637 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T15:08:34.637Z,1538665714.637 [Default:CheckIn] Stopped
2018-10-04T15:08:34.637Z,1538665714.637 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T15:08:34.638Z,1538665714.638 [Default:CheckIn](INFO): Running loop #64
2018-10-04T15:08:34.638Z,1538665714.638 [Default:CheckIn] Running Loop=64
2018-10-04T15:08:34.638Z,1538665714.638 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T15:08:34.638Z,1538665714.638 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T15:08:51.038Z,1538665731.038 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:08:51.038Z,1538665731.038 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-10-04T15:08:51.039Z,1538665731.039 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:08:51.040Z,1538665731.040 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:08:51.041Z,1538665731.041 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-04T15:08:51.045Z,1538665731.045 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:08:51.074Z,1538665731.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:08:51.075Z,1538665731.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:08:51.436Z,1538665731.436 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:08:51.436Z,1538665731.436 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-10-04T15:08:51.436Z,1538665731.436 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:08:51.436Z,1538665731.436 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-04T15:08:54.677Z,1538665734.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:08:54.678Z,1538665734.678 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:08:54.678Z,1538665734.678 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:08:54.678Z,1538665734.678 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:08:54.679Z,1538665734.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:08:54.679Z,1538665734.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:09:58.433Z,1538665798.433 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T15:09:58.433Z,1538665798.433 [RDI_Pathfinder](ERROR): Failed to parse:
:TS

2018-10-04T15:11:55.079Z,1538665915.079 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:11:55.079Z,1538665915.079 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-10-04T15:11:55.079Z,1538665915.079 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:11:55.085Z,1538665915.085 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:11:55.086Z,1538665915.086 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-04T15:11:55.086Z,1538665915.086 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:11:55.119Z,1538665915.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:11:55.120Z,1538665915.120 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:11:55.463Z,1538665915.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:11:55.463Z,1538665915.463 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-10-04T15:11:55.464Z,1538665915.464 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:11:55.464Z,1538665915.464 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-04T15:11:55.858Z,1538665915.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:11:55.858Z,1538665915.858 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:11:55.858Z,1538665915.858 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:11:55.859Z,1538665915.859 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:11:55.859Z,1538665915.859 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:11:55.860Z,1538665915.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:13:36.863Z,1538666016.863 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T15:08:34.6Z
2018-10-04T15:13:36.863Z,1538666016.863 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T15:13:36.863Z,1538666016.863 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T15:13:41.794Z,1538666021.794 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0193.lzma
2018-10-04T15:13:42.564Z,1538666022.564 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0193.lzma.bak
2018-10-04T15:13:42.564Z,1538666022.564 [DataOverHttps](INFO): SBD MOMSN=8610941
2018-10-04T15:13:51.710Z,1538666031.710 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20181004T041305/Express0194.lzma
2018-10-04T15:13:52.504Z,1538666032.504 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0194.lzma.bak
2018-10-04T15:13:52.504Z,1538666032.504 [DataOverHttps](INFO): SBD MOMSN=8610943
2018-10-04T15:13:53.492Z,1538666033.492 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T15:13:53.492Z,1538666033.492 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T15:13:53.492Z,1538666033.492 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T15:13:58.399Z,1538666038.399 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T15:13:58.399Z,1538666038.399 [NAL9602] Data Fault, FailCount= 5
2018-10-04T15:13:58.399Z,1538666038.399 [NAL9602](ERROR): Data Fault
2018-10-04T15:13:58.495Z,1538666038.495 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T15:13:58.495Z,1538666038.495 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T15:13:58.799Z,1538666038.799 [NAL9602](INFO): Powering down
2018-10-04T15:13:58.863Z,1538666038.863 [CBIT](INFO): Critical error at 20181004T151358
2018-10-04T15:14:55.972Z,1538666095.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:14:55.972Z,1538666095.972 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-10-04T15:14:55.972Z,1538666095.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:14:55.974Z,1538666095.974 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:14:55.975Z,1538666095.975 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-04T15:14:55.975Z,1538666095.975 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:14:56.000Z,1538666096.000 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:14:56.001Z,1538666096.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:14:56.346Z,1538666096.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:14:56.346Z,1538666096.346 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-10-04T15:14:56.347Z,1538666096.347 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:14:56.347Z,1538666096.347 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-04T15:14:56.737Z,1538666096.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:14:56.738Z,1538666096.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:14:56.738Z,1538666096.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:14:56.739Z,1538666096.739 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:14:56.739Z,1538666096.739 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:14:56.739Z,1538666096.739 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:15:58.503Z,1538666158.503 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T15:15:58.503Z,1538666158.503 [NAL9602] No Fault, FailCount= 5
2018-10-04T15:15:58.827Z,1538666158.827 [NAL9602](INFO): Powering up NAL9602
2018-10-04T15:16:09.629Z,1538666169.629 [NAL9602](INFO): NAL9602 initialized
2018-10-04T15:16:21.925Z,1538666181.925 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-04T15:16:21.925Z,1538666181.925 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,     ,   0.00,39701.07
2018-10-04T15:17:56.940Z,1538666276.940 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:17:56.941Z,1538666276.941 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-10-04T15:17:56.941Z,1538666276.941 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:17:56.957Z,1538666276.957 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:17:56.957Z,1538666276.957 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-04T15:17:56.958Z,1538666276.958 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:17:56.993Z,1538666276.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:17:57.001Z,1538666277.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:17:57.386Z,1538666277.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:17:57.386Z,1538666277.386 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-10-04T15:17:57.387Z,1538666277.387 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:17:57.387Z,1538666277.387 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-04T15:17:57.741Z,1538666277.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:17:57.741Z,1538666277.741 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:17:57.742Z,1538666277.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:17:57.742Z,1538666277.742 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:17:57.742Z,1538666277.742 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:17:57.743Z,1538666277.743 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:18:53.957Z,1538666333.957 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T15:18:53.957Z,1538666333.957 [Default:CheckIn:C.Wait] Stopped
2018-10-04T15:18:53.957Z,1538666333.957 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T15:18:53.957Z,1538666333.957 [Default:CheckIn:D] Running Loop=1
2018-10-04T15:18:54.354Z,1538666334.354 [Default:CheckIn:D] Stopped
2018-10-04T15:18:54.354Z,1538666334.354 [Default:CheckIn:E] Running Loop=1
2018-10-04T15:18:54.761Z,1538666334.761 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 662.443099 min 
2018-10-04T15:18:54.761Z,1538666334.761 [Default:CheckIn:E] Stopped
2018-10-04T15:18:54.761Z,1538666334.761 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T15:18:54.762Z,1538666334.762 [Default:CheckIn] Stopped
2018-10-04T15:18:54.762Z,1538666334.762 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T15:18:54.762Z,1538666334.762 [Default:CheckIn](INFO): Running loop #65
2018-10-04T15:18:54.762Z,1538666334.762 [Default:CheckIn] Running Loop=65
2018-10-04T15:18:54.762Z,1538666334.762 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T15:18:54.762Z,1538666334.762 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T15:21:00.232Z,1538666460.232 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:21:00.232Z,1538666460.232 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-10-04T15:21:00.232Z,1538666460.232 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:21:00.236Z,1538666460.236 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:21:00.236Z,1538666460.236 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-04T15:21:00.236Z,1538666460.236 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:21:00.279Z,1538666460.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:21:00.279Z,1538666460.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:21:00.395Z,1538666460.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:21:00.395Z,1538666460.395 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-10-04T15:21:00.395Z,1538666460.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:21:00.396Z,1538666460.396 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-04T15:21:00.742Z,1538666460.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:21:00.742Z,1538666460.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:21:00.743Z,1538666460.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:21:00.743Z,1538666460.743 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:21:00.744Z,1538666460.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:21:00.744Z,1538666460.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:21:01.144Z,1538666461.144 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T15:23:56.705Z,1538666636.705 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T15:18:54.8Z
2018-10-04T15:23:56.705Z,1538666636.705 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T15:23:56.705Z,1538666636.705 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T15:24:01.621Z,1538666641.621 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:24:01.622Z,1538666641.622 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-10-04T15:24:01.622Z,1538666641.622 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:24:01.624Z,1538666641.624 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:24:01.624Z,1538666641.624 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-04T15:24:01.624Z,1538666641.624 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:24:01.653Z,1538666641.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:24:01.654Z,1538666641.654 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:24:01.695Z,1538666641.695 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0196.lzma
2018-10-04T15:24:01.767Z,1538666641.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:24:01.767Z,1538666641.767 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-10-04T15:24:01.767Z,1538666641.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:24:01.768Z,1538666641.768 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-04T15:24:02.148Z,1538666642.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:24:02.149Z,1538666642.149 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:24:02.149Z,1538666642.149 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:24:02.150Z,1538666642.150 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:24:02.150Z,1538666642.150 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:24:02.151Z,1538666642.151 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:24:02.468Z,1538666642.468 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0196.lzma.bak
2018-10-04T15:24:02.469Z,1538666642.469 [DataOverHttps](INFO): SBD MOMSN=8610946
2018-10-04T15:24:11.665Z,1538666651.665 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0197.lzma
2018-10-04T15:24:12.428Z,1538666652.428 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0197.lzma.bak
2018-10-04T15:24:12.428Z,1538666652.428 [DataOverHttps](INFO): SBD MOMSN=8610949
2018-10-04T15:24:13.411Z,1538666653.411 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T15:24:13.411Z,1538666653.411 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T15:24:13.411Z,1538666653.411 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T15:26:12.341Z,1538666772.341 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T15:26:12.341Z,1538666772.341 [NAL9602] Data Fault, FailCount= 1
2018-10-04T15:26:12.341Z,1538666772.341 [NAL9602](ERROR): Data Fault
2018-10-04T15:26:12.404Z,1538666772.404 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T15:26:12.727Z,1538666772.727 [NAL9602](INFO): Powering down
2018-10-04T15:26:13.588Z,1538666773.588 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T15:26:13.588Z,1538666773.588 [NAL9602] No Fault, FailCount= 1
2018-10-04T15:26:42.820Z,1538666802.820 [NAL9602](INFO): Powering up NAL9602
2018-10-04T15:26:54.015Z,1538666814.015 [NAL9602](INFO): NAL9602 initialized
2018-10-04T15:27:02.475Z,1538666822.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:27:02.475Z,1538666822.475 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-10-04T15:27:02.475Z,1538666822.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:27:02.485Z,1538666822.485 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:27:02.485Z,1538666822.485 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-04T15:27:02.486Z,1538666822.486 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:27:02.511Z,1538666822.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:27:02.512Z,1538666822.512 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:27:02.905Z,1538666822.905 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:27:02.905Z,1538666822.905 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-10-04T15:27:02.905Z,1538666822.905 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:27:02.906Z,1538666822.906 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-04T15:27:03.266Z,1538666823.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:27:03.266Z,1538666823.266 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:27:03.267Z,1538666823.267 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:27:03.267Z,1538666823.267 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:27:03.268Z,1538666823.268 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:27:03.268Z,1538666823.268 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:28:24.155Z,1538666904.155 [BPC1](ERROR): BPC1A: No match for stick with serial number:1717 in the onboard configuration file.
2018-10-04T15:28:24.930Z,1538666904.930 [RDI_Pathfinder](ERROR): Failed to parse:
:BE,-32768,-32768,-32768,V
2018-10-04T15:29:13.845Z,1538666953.845 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T15:29:13.846Z,1538666953.846 [Default:CheckIn:C.Wait] Stopped
2018-10-04T15:29:13.846Z,1538666953.846 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T15:29:13.846Z,1538666953.846 [Default:CheckIn:D] Running Loop=1
2018-10-04T15:29:14.245Z,1538666954.245 [Default:CheckIn:D] Stopped
2018-10-04T15:29:14.245Z,1538666954.245 [Default:CheckIn:E] Running Loop=1
2018-10-04T15:29:14.641Z,1538666954.641 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 672.774609 min 
2018-10-04T15:29:14.641Z,1538666954.641 [Default:CheckIn:E] Stopped
2018-10-04T15:29:14.642Z,1538666954.642 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T15:29:14.642Z,1538666954.642 [Default:CheckIn] Stopped
2018-10-04T15:29:14.642Z,1538666954.642 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T15:29:14.642Z,1538666954.642 [Default:CheckIn](INFO): Running loop #66
2018-10-04T15:29:14.642Z,1538666954.642 [Default:CheckIn] Running Loop=66
2018-10-04T15:29:14.642Z,1538666954.642 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T15:29:14.642Z,1538666954.642 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T15:30:03.639Z,1538667003.639 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:30:03.639Z,1538667003.639 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-10-04T15:30:03.639Z,1538667003.639 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:30:03.645Z,1538667003.645 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:30:03.646Z,1538667003.646 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-04T15:30:03.646Z,1538667003.646 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:30:03.671Z,1538667003.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:30:03.671Z,1538667003.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:30:04.071Z,1538667004.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:30:04.071Z,1538667004.071 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-10-04T15:30:04.072Z,1538667004.072 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:30:04.072Z,1538667004.072 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-04T15:30:04.426Z,1538667004.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:30:04.426Z,1538667004.426 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:30:04.427Z,1538667004.427 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:30:04.427Z,1538667004.427 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:30:04.427Z,1538667004.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:30:04.428Z,1538667004.428 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:33:05.914Z,1538667185.914 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:33:05.914Z,1538667185.914 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-10-04T15:33:05.914Z,1538667185.914 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:33:05.916Z,1538667185.916 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:33:05.916Z,1538667185.916 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-04T15:33:05.916Z,1538667185.916 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:33:05.941Z,1538667185.941 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:33:05.942Z,1538667185.942 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:33:06.074Z,1538667186.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:33:06.074Z,1538667186.074 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-10-04T15:33:06.075Z,1538667186.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:33:06.075Z,1538667186.075 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-04T15:33:06.422Z,1538667186.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:33:06.422Z,1538667186.422 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:33:06.423Z,1538667186.423 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:33:06.423Z,1538667186.423 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:33:06.423Z,1538667186.423 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:33:06.424Z,1538667186.424 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:33:07.207Z,1538667187.207 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T15:33:54.623Z,1538667234.623 [BPC1](ERROR): BPC1B: No match for stick with serial number:1717 in the onboard configuration file.
2018-10-04T15:34:16.227Z,1538667256.227 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T15:29:14.6Z
2018-10-04T15:34:16.227Z,1538667256.227 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T15:34:16.227Z,1538667256.227 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T15:34:21.323Z,1538667261.323 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0199.lzma
2018-10-04T15:34:22.105Z,1538667262.105 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0199.lzma.bak
2018-10-04T15:34:22.105Z,1538667262.105 [DataOverHttps](INFO): SBD MOMSN=8610953
2018-10-04T15:34:27.706Z,1538667267.706 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T15:34:31.361Z,1538667271.361 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0200.lzma
2018-10-04T15:34:32.144Z,1538667272.144 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0200.lzma.bak
2018-10-04T15:34:32.144Z,1538667272.144 [DataOverHttps](INFO): SBD MOMSN=8610955
2018-10-04T15:34:33.094Z,1538667273.094 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T15:34:33.094Z,1538667273.094 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T15:34:33.094Z,1538667273.094 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T15:35:52.259Z,1538667352.259 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T15:35:52.259Z,1538667352.259 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-3768,-32768,-32768,V
2018-10-04T15:36:06.683Z,1538667366.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:36:06.683Z,1538667366.683 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-10-04T15:36:06.683Z,1538667366.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:36:06.689Z,1538667366.689 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:36:06.691Z,1538667366.691 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-04T15:36:06.691Z,1538667366.691 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:36:06.725Z,1538667366.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:36:06.726Z,1538667366.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:36:07.127Z,1538667367.127 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:36:07.127Z,1538667367.127 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-10-04T15:36:07.127Z,1538667367.127 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:36:07.127Z,1538667367.127 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-04T15:36:07.478Z,1538667367.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:36:07.478Z,1538667367.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:36:07.479Z,1538667367.479 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:36:07.479Z,1538667367.479 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:36:07.479Z,1538667367.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:36:07.480Z,1538667367.480 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:36:59.995Z,1538667419.995 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T15:36:59.995Z,1538667419.995 [NAL9602] Data Fault, FailCount= 2
2018-10-04T15:36:59.995Z,1538667419.995 [NAL9602](ERROR): Data Fault
2018-10-04T15:37:00.064Z,1538667420.064 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T15:37:00.391Z,1538667420.391 [NAL9602](INFO): Powering down
2018-10-04T15:37:01.257Z,1538667421.257 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T15:37:01.257Z,1538667421.257 [NAL9602] No Fault, FailCount= 2
2018-10-04T15:37:32.363Z,1538667452.363 [NAL9602](INFO): Powering up NAL9602
2018-10-04T15:37:43.263Z,1538667463.263 [NAL9602](INFO): NAL9602 initialized
2018-10-04T15:39:07.491Z,1538667547.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:39:07.491Z,1538667547.491 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-10-04T15:39:07.491Z,1538667547.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:39:07.497Z,1538667547.497 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:39:07.498Z,1538667547.498 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-04T15:39:07.498Z,1538667547.498 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:39:07.523Z,1538667547.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:39:07.524Z,1538667547.524 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:39:07.931Z,1538667547.931 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:39:07.931Z,1538667547.931 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-10-04T15:39:07.931Z,1538667547.931 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:39:07.931Z,1538667547.931 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-04T15:39:08.319Z,1538667548.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:39:08.319Z,1538667548.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:39:08.319Z,1538667548.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:39:08.320Z,1538667548.320 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:39:08.320Z,1538667548.320 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:39:08.325Z,1538667548.325 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:39:33.208Z,1538667573.208 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T15:39:33.208Z,1538667573.208 [Default:CheckIn:C.Wait] Stopped
2018-10-04T15:39:33.208Z,1538667573.208 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T15:39:33.208Z,1538667573.208 [Default:CheckIn:D] Running Loop=1
2018-10-04T15:39:33.581Z,1538667573.581 [Default:CheckIn:D] Stopped
2018-10-04T15:39:33.581Z,1538667573.581 [Default:CheckIn:E] Running Loop=1
2018-10-04T15:39:34.003Z,1538667574.003 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 683.096875 min 
2018-10-04T15:39:34.003Z,1538667574.003 [Default:CheckIn:E] Stopped
2018-10-04T15:39:34.003Z,1538667574.003 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T15:39:34.003Z,1538667574.003 [Default:CheckIn] Stopped
2018-10-04T15:39:34.003Z,1538667574.003 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T15:39:34.004Z,1538667574.004 [Default:CheckIn](INFO): Running loop #67
2018-10-04T15:39:34.004Z,1538667574.004 [Default:CheckIn] Running Loop=67
2018-10-04T15:39:34.004Z,1538667574.004 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T15:39:34.004Z,1538667574.004 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T15:42:08.647Z,1538667728.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:42:08.648Z,1538667728.648 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-10-04T15:42:08.648Z,1538667728.648 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:42:08.654Z,1538667728.654 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:42:08.654Z,1538667728.654 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-04T15:42:08.654Z,1538667728.654 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:42:08.672Z,1538667728.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:42:08.672Z,1538667728.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:42:09.058Z,1538667729.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:42:09.058Z,1538667729.058 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-10-04T15:42:09.058Z,1538667729.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:42:09.058Z,1538667729.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-04T15:42:09.435Z,1538667729.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:42:09.435Z,1538667729.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:42:09.436Z,1538667729.436 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:42:09.436Z,1538667729.436 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:42:09.437Z,1538667729.437 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:42:09.441Z,1538667729.441 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:44:35.809Z,1538667875.809 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T15:39:34.0Z
2018-10-04T15:44:35.810Z,1538667875.810 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T15:44:35.810Z,1538667875.810 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T15:44:40.801Z,1538667880.801 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0202.lzma
2018-10-04T15:44:41.572Z,1538667881.572 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0202.lzma.bak
2018-10-04T15:44:41.572Z,1538667881.572 [DataOverHttps](INFO): SBD MOMSN=8610959
2018-10-04T15:44:50.725Z,1538667890.725 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0203.lzma
2018-10-04T15:44:51.499Z,1538667891.499 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0203.lzma.bak
2018-10-04T15:44:51.499Z,1538667891.499 [DataOverHttps](INFO): SBD MOMSN=8610961
2018-10-04T15:44:52.428Z,1538667892.428 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T15:44:52.428Z,1538667892.428 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T15:44:52.428Z,1538667892.428 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T15:45:09.800Z,1538667909.800 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:45:09.800Z,1538667909.800 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-10-04T15:45:09.800Z,1538667909.800 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:45:09.802Z,1538667909.802 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:45:09.802Z,1538667909.802 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-04T15:45:09.802Z,1538667909.802 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:45:09.816Z,1538667909.816 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:45:09.816Z,1538667909.816 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:45:10.244Z,1538667910.244 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:45:10.244Z,1538667910.244 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-10-04T15:45:10.249Z,1538667910.249 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:45:10.249Z,1538667910.249 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-04T15:45:10.614Z,1538667910.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:45:10.614Z,1538667910.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:45:10.615Z,1538667910.615 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:45:10.615Z,1538667910.615 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:45:10.615Z,1538667910.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:45:10.616Z,1538667910.616 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:47:44.371Z,1538668064.371 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T15:47:44.371Z,1538668064.371 [NAL9602] Data Fault, FailCount= 3
2018-10-04T15:47:44.371Z,1538668064.371 [NAL9602](ERROR): Data Fault
2018-10-04T15:47:44.445Z,1538668064.445 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T15:47:44.777Z,1538668064.777 [NAL9602](INFO): Powering down
2018-10-04T15:47:45.634Z,1538668065.634 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T15:47:45.634Z,1538668065.634 [NAL9602] No Fault, FailCount= 3
2018-10-04T15:48:10.982Z,1538668090.982 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:48:10.983Z,1538668090.983 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-10-04T15:48:10.983Z,1538668090.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:48:10.985Z,1538668090.985 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:48:10.985Z,1538668090.985 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-04T15:48:10.985Z,1538668090.985 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:48:10.998Z,1538668090.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:48:10.998Z,1538668090.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:48:11.363Z,1538668091.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:48:11.363Z,1538668091.363 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-10-04T15:48:11.363Z,1538668091.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:48:11.363Z,1538668091.363 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-04T15:48:11.750Z,1538668091.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:48:11.750Z,1538668091.750 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:48:11.751Z,1538668091.751 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:48:11.751Z,1538668091.751 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:48:11.751Z,1538668091.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:48:11.752Z,1538668091.752 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:48:14.915Z,1538668094.915 [NAL9602](INFO): Powering up NAL9602
2018-10-04T15:48:28.203Z,1538668108.203 [NAL9602](INFO): NAL9602 initialized
2018-10-04T15:49:52.937Z,1538668192.937 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T15:49:52.937Z,1538668192.937 [Default:CheckIn:C.Wait] Stopped
2018-10-04T15:49:52.937Z,1538668192.937 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T15:49:52.937Z,1538668192.937 [Default:CheckIn:D] Running Loop=1
2018-10-04T15:49:53.313Z,1538668193.313 [Default:CheckIn:D] Stopped
2018-10-04T15:49:53.313Z,1538668193.313 [Default:CheckIn:E] Running Loop=1
2018-10-04T15:49:53.709Z,1538668193.709 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 693.425716 min 
2018-10-04T15:49:53.709Z,1538668193.709 [Default:CheckIn:E] Stopped
2018-10-04T15:49:53.710Z,1538668193.710 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T15:49:53.710Z,1538668193.710 [Default:CheckIn] Stopped
2018-10-04T15:49:53.710Z,1538668193.710 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T15:49:53.710Z,1538668193.710 [Default:CheckIn](INFO): Running loop #68
2018-10-04T15:49:53.710Z,1538668193.710 [Default:CheckIn] Running Loop=68
2018-10-04T15:49:53.710Z,1538668193.710 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T15:49:53.710Z,1538668193.710 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T15:51:11.874Z,1538668271.874 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:51:11.874Z,1538668271.874 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-10-04T15:51:11.874Z,1538668271.874 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:51:11.876Z,1538668271.876 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:51:11.876Z,1538668271.876 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-10-04T15:51:11.876Z,1538668271.876 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:51:11.902Z,1538668271.902 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:51:11.902Z,1538668271.902 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:51:12.314Z,1538668272.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:51:12.314Z,1538668272.314 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-10-04T15:51:12.315Z,1538668272.315 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:51:12.315Z,1538668272.315 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-10-04T15:51:12.674Z,1538668272.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:51:12.674Z,1538668272.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:51:12.675Z,1538668272.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:51:12.675Z,1538668272.675 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:51:12.676Z,1538668272.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:51:12.676Z,1538668272.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:54:12.798Z,1538668452.798 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:54:12.798Z,1538668452.798 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-10-04T15:54:12.798Z,1538668452.798 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:54:12.800Z,1538668452.800 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:54:12.800Z,1538668452.800 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-10-04T15:54:12.800Z,1538668452.800 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:54:12.846Z,1538668452.846 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:54:12.846Z,1538668452.846 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:54:13.238Z,1538668453.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:54:13.238Z,1538668453.238 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-10-04T15:54:13.239Z,1538668453.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:54:13.239Z,1538668453.239 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-10-04T15:54:13.602Z,1538668453.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:54:13.602Z,1538668453.602 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:54:13.603Z,1538668453.603 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:54:13.603Z,1538668453.603 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:54:13.603Z,1538668453.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:54:13.604Z,1538668453.604 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:54:56.131Z,1538668496.131 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T15:49:53.7Z
2018-10-04T15:54:56.131Z,1538668496.131 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T15:54:56.131Z,1538668496.131 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T15:55:01.082Z,1538668501.082 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0205.lzma
2018-10-04T15:55:01.871Z,1538668501.871 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0205.lzma.bak
2018-10-04T15:55:01.871Z,1538668501.871 [DataOverHttps](INFO): SBD MOMSN=8610965
2018-10-04T15:55:11.130Z,1538668511.130 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0206.lzma
2018-10-04T15:55:11.893Z,1538668511.893 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0206.lzma.bak
2018-10-04T15:55:11.893Z,1538668511.893 [DataOverHttps](INFO): SBD MOMSN=8610967
2018-10-04T15:55:12.850Z,1538668512.850 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T15:55:12.850Z,1538668512.850 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T15:55:12.850Z,1538668512.850 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T15:57:13.754Z,1538668633.754 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:57:13.754Z,1538668633.754 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-10-04T15:57:13.754Z,1538668633.754 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T15:57:13.756Z,1538668633.756 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T15:57:13.756Z,1538668633.756 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-10-04T15:57:13.756Z,1538668633.756 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T15:57:13.776Z,1538668633.776 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T15:57:13.777Z,1538668633.777 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T15:57:14.179Z,1538668634.179 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T15:57:14.179Z,1538668634.179 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-10-04T15:57:14.180Z,1538668634.180 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T15:57:14.180Z,1538668634.180 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-10-04T15:57:14.538Z,1538668634.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T15:57:14.538Z,1538668634.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:57:14.539Z,1538668634.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:57:14.539Z,1538668634.539 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T15:57:14.539Z,1538668634.539 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T15:57:14.540Z,1538668634.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T15:58:29.883Z,1538668709.883 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T15:58:29.883Z,1538668709.883 [NAL9602] Data Fault, FailCount= 4
2018-10-04T15:58:29.883Z,1538668709.883 [NAL9602](ERROR): Data Fault
2018-10-04T15:58:29.946Z,1538668709.946 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T15:58:30.283Z,1538668710.283 [NAL9602](INFO): Powering down
2018-10-04T15:58:31.152Z,1538668711.152 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T15:58:31.152Z,1538668711.152 [NAL9602] No Fault, FailCount= 4
2018-10-04T15:59:00.347Z,1538668740.347 [NAL9602](INFO): Powering up NAL9602
2018-10-04T15:59:11.543Z,1538668751.543 [NAL9602](INFO): NAL9602 initialized
2018-10-04T16:00:12.968Z,1538668812.968 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T16:00:12.973Z,1538668812.973 [Default:CheckIn:C.Wait] Stopped
2018-10-04T16:00:12.973Z,1538668812.973 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T16:00:12.973Z,1538668812.973 [Default:CheckIn:D] Running Loop=1
2018-10-04T16:00:13.362Z,1538668813.362 [Default:CheckIn:D] Stopped
2018-10-04T16:00:13.362Z,1538668813.362 [Default:CheckIn:E] Running Loop=1
2018-10-04T16:00:13.732Z,1538668813.732 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 703.759896 min 
2018-10-04T16:00:13.732Z,1538668813.732 [Default:CheckIn:E] Stopped
2018-10-04T16:00:13.732Z,1538668813.732 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T16:00:13.732Z,1538668813.732 [Default:CheckIn] Stopped
2018-10-04T16:00:13.733Z,1538668813.733 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T16:00:13.733Z,1538668813.733 [Default:CheckIn](INFO): Running loop #69
2018-10-04T16:00:13.733Z,1538668813.733 [Default:CheckIn] Running Loop=69
2018-10-04T16:00:13.733Z,1538668813.733 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T16:00:13.733Z,1538668813.733 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T16:00:14.944Z,1538668814.944 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:00:14.944Z,1538668814.944 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-10-04T16:00:14.944Z,1538668814.944 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:00:14.946Z,1538668814.946 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:00:14.947Z,1538668814.947 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-10-04T16:00:14.947Z,1538668814.947 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:00:14.977Z,1538668814.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:00:14.977Z,1538668814.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:00:15.363Z,1538668815.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:00:15.364Z,1538668815.364 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-10-04T16:00:15.364Z,1538668815.364 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:00:15.364Z,1538668815.364 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-10-04T16:00:15.742Z,1538668815.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:00:15.743Z,1538668815.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:00:15.743Z,1538668815.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:00:15.743Z,1538668815.743 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:00:15.744Z,1538668815.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:00:15.744Z,1538668815.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:03:15.895Z,1538668995.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:03:15.895Z,1538668995.895 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-10-04T16:03:15.895Z,1538668995.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:03:15.901Z,1538668995.901 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:03:15.901Z,1538668995.901 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-10-04T16:03:15.902Z,1538668995.902 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:03:15.923Z,1538668995.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:03:15.923Z,1538668995.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:03:16.290Z,1538668996.290 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:03:16.290Z,1538668996.290 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-10-04T16:03:16.291Z,1538668996.291 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:03:16.291Z,1538668996.291 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-10-04T16:03:16.662Z,1538668996.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:03:16.662Z,1538668996.662 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:03:16.663Z,1538668996.663 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:03:16.663Z,1538668996.663 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:03:16.663Z,1538668996.663 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:03:16.664Z,1538668996.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:04:12.852Z,1538669052.852 [RDI_Pathfinder](ERROR): only read 4 of 5 data items
2018-10-04T16:04:12.852Z,1538669052.852 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32BS,-32768,-32768,-32768,V
2018-10-04T16:05:15.791Z,1538669115.791 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T16:00:13.7Z
2018-10-04T16:05:15.791Z,1538669115.791 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T16:05:15.791Z,1538669115.791 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T16:05:20.728Z,1538669120.728 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0208.lzma
2018-10-04T16:05:21.508Z,1538669121.508 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0208.lzma.bak
2018-10-04T16:05:21.510Z,1538669121.510 [DataOverHttps](INFO): SBD MOMSN=8610971
2018-10-04T16:05:30.698Z,1538669130.698 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0209.lzma
2018-10-04T16:05:31.436Z,1538669131.436 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0209.lzma.bak
2018-10-04T16:05:31.436Z,1538669131.436 [DataOverHttps](INFO): SBD MOMSN=8610973
2018-10-04T16:05:32.379Z,1538669132.379 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T16:05:32.379Z,1538669132.379 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T16:05:32.379Z,1538669132.379 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T16:06:17.059Z,1538669177.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:06:17.059Z,1538669177.059 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-10-04T16:06:17.059Z,1538669177.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:06:17.061Z,1538669177.061 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:06:17.061Z,1538669177.061 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-10-04T16:06:17.061Z,1538669177.061 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:06:17.074Z,1538669177.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:06:17.074Z,1538669177.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:06:17.447Z,1538669177.447 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:06:17.447Z,1538669177.447 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-10-04T16:06:17.447Z,1538669177.447 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:06:17.447Z,1538669177.447 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-10-04T16:06:17.822Z,1538669177.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:06:17.822Z,1538669177.822 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:06:17.823Z,1538669177.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:06:17.823Z,1538669177.823 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:06:17.823Z,1538669177.823 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:06:17.824Z,1538669177.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:09:13.513Z,1538669353.513 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T16:09:13.514Z,1538669353.514 [NAL9602] Data Fault, FailCount= 5
2018-10-04T16:09:13.514Z,1538669353.514 [NAL9602](ERROR): Data Fault
2018-10-04T16:09:13.585Z,1538669353.585 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T16:09:13.586Z,1538669353.586 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T16:09:13.915Z,1538669353.915 [NAL9602](INFO): Powering down
2018-10-04T16:09:13.991Z,1538669353.991 [CBIT](INFO): Critical error at 20181004T160913
2018-10-04T16:09:17.951Z,1538669357.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:09:17.951Z,1538669357.951 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-10-04T16:09:17.951Z,1538669357.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:09:17.953Z,1538669357.953 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:09:17.953Z,1538669357.953 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-10-04T16:09:17.953Z,1538669357.953 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:09:17.996Z,1538669357.996 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:09:17.997Z,1538669357.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:09:18.388Z,1538669358.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:09:18.388Z,1538669358.388 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-10-04T16:09:18.388Z,1538669358.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:09:18.388Z,1538669358.388 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-10-04T16:09:18.746Z,1538669358.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:09:18.746Z,1538669358.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:09:18.747Z,1538669358.747 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:09:18.747Z,1538669358.747 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:09:18.747Z,1538669358.747 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:09:18.748Z,1538669358.748 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:10:32.540Z,1538669432.540 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T16:10:32.541Z,1538669432.541 [Default:CheckIn:C.Wait] Stopped
2018-10-04T16:10:32.541Z,1538669432.541 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T16:10:32.541Z,1538669432.541 [Default:CheckIn:D] Running Loop=1
2018-10-04T16:10:32.976Z,1538669432.976 [Default:CheckIn:D] Stopped
2018-10-04T16:10:32.976Z,1538669432.976 [Default:CheckIn:E] Running Loop=1
2018-10-04T16:10:33.353Z,1538669433.353 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 714.086784 min 
2018-10-04T16:10:33.353Z,1538669433.353 [Default:CheckIn:E] Stopped
2018-10-04T16:10:33.353Z,1538669433.353 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T16:10:33.353Z,1538669433.353 [Default:CheckIn] Stopped
2018-10-04T16:10:33.353Z,1538669433.353 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T16:10:33.354Z,1538669433.354 [Default:CheckIn](INFO): Running loop #70
2018-10-04T16:10:33.354Z,1538669433.354 [Default:CheckIn] Running Loop=70
2018-10-04T16:10:33.354Z,1538669433.354 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T16:10:33.354Z,1538669433.354 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T16:11:13.896Z,1538669473.896 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T16:11:13.896Z,1538669473.896 [NAL9602] No Fault, FailCount= 5
2018-10-04T16:11:14.199Z,1538669474.199 [NAL9602](INFO): Powering up NAL9602
2018-10-04T16:11:25.015Z,1538669485.015 [NAL9602](INFO): NAL9602 initialized
2018-10-04T16:12:19.063Z,1538669539.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:12:19.063Z,1538669539.063 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-10-04T16:12:19.063Z,1538669539.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:12:19.069Z,1538669539.069 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:12:19.069Z,1538669539.069 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-10-04T16:12:19.069Z,1538669539.069 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:12:19.105Z,1538669539.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:12:19.106Z,1538669539.106 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:12:19.486Z,1538669539.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:12:19.486Z,1538669539.486 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-10-04T16:12:19.487Z,1538669539.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:12:19.487Z,1538669539.487 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-10-04T16:12:19.846Z,1538669539.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:12:19.846Z,1538669539.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:12:19.847Z,1538669539.847 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:12:19.847Z,1538669539.847 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:12:19.847Z,1538669539.847 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:12:19.848Z,1538669539.848 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:12:23.857Z,1538669543.857 [RDI_Pathfinder](ERROR): Unknown system health message
2018-10-04T16:12:23.858Z,1538669543.858 [RDI_Pathfinder] Hardware Fault, FailCount= 1
2018-10-04T16:12:23.858Z,1538669543.858 [RDI_Pathfinder](ERROR): Hardware Fault
2018-10-04T16:12:23.904Z,1538669543.904 [CBIT](ERROR): Hardware Fault in component: RDI_Pathfinder
2018-10-04T16:12:24.317Z,1538669544.317 [RDI_Pathfinder](INFO): Powering down
2018-10-04T16:12:25.080Z,1538669545.080 [CBIT](INFO): Clearing failed state for component RDI_Pathfinder
2018-10-04T16:12:25.080Z,1538669545.080 [RDI_Pathfinder] No Fault, FailCount= 0
2018-10-04T16:12:39.527Z,1538669559.527 [RDI_Pathfinder](ERROR): Failed to parse:Pathfinder
2018-10-04T16:14:08.547Z,1538669648.547 [CBIT](IMPORTANT): Beginning ground fault scan
2018-10-04T16:14:19.382Z,1538669659.382 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.126840
CHAN A1 (24V): 0.003351
CHAN A2 (12V): -0.007156
CHAN A3 (5V): -0.002227
CHAN B0 (3.3V): 0.000363
CHAN B1 (3.15aV): 0.000180
CHAN B2 (3.15bV): 0.000149
CHAN B3 (GND): 0.002160
OPEN: 0.004788
Full Scale Calc: 4.765 mA, -1.589 mA
2018-10-04T16:15:19.895Z,1538669719.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:15:19.895Z,1538669719.895 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-10-04T16:15:19.895Z,1538669719.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:15:19.897Z,1538669719.897 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:15:19.897Z,1538669719.897 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-10-04T16:15:19.897Z,1538669719.897 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:15:19.919Z,1538669719.919 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:15:19.919Z,1538669719.919 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:15:20.337Z,1538669720.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:15:20.341Z,1538669720.341 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-10-04T16:15:20.341Z,1538669720.341 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:15:20.341Z,1538669720.341 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-10-04T16:15:20.703Z,1538669720.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:15:20.704Z,1538669720.704 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:15:20.704Z,1538669720.704 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:15:20.704Z,1538669720.704 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:15:20.705Z,1538669720.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:15:20.705Z,1538669720.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:15:35.914Z,1538669735.914 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T16:10:33.4Z
2018-10-04T16:15:35.914Z,1538669735.914 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T16:15:35.914Z,1538669735.914 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T16:15:40.845Z,1538669740.845 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0211.lzma
2018-10-04T16:15:41.616Z,1538669741.616 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0211.lzma.bak
2018-10-04T16:15:41.616Z,1538669741.616 [DataOverHttps](INFO): SBD MOMSN=8610977
2018-10-04T16:15:51.623Z,1538669751.623 [DataOverHttps](INFO): Sending 322 bytes from file Logs/20181004T041305/Express0212.lzma
2018-10-04T16:15:52.388Z,1538669752.388 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0212.lzma.bak
2018-10-04T16:15:52.388Z,1538669752.388 [DataOverHttps](INFO): SBD MOMSN=8610980
2018-10-04T16:15:53.326Z,1538669753.326 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T16:15:53.326Z,1538669753.326 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T16:15:53.326Z,1538669753.326 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T16:18:20.762Z,1538669900.762 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:18:20.762Z,1538669900.762 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-10-04T16:18:20.762Z,1538669900.762 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:18:20.764Z,1538669900.764 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:18:20.764Z,1538669900.764 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-10-04T16:18:20.764Z,1538669900.764 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:18:20.777Z,1538669900.777 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:18:20.778Z,1538669900.778 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:18:21.181Z,1538669901.181 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:18:21.181Z,1538669901.181 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-10-04T16:18:21.182Z,1538669901.182 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:18:21.182Z,1538669901.182 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-10-04T16:18:21.558Z,1538669901.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:18:21.558Z,1538669901.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:18:21.559Z,1538669901.559 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:18:21.559Z,1538669901.559 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:18:21.560Z,1538669901.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:18:21.560Z,1538669901.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:20:53.675Z,1538670053.675 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T16:20:53.675Z,1538670053.675 [Default:CheckIn:C.Wait] Stopped
2018-10-04T16:20:53.675Z,1538670053.675 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T16:20:53.675Z,1538670053.675 [Default:CheckIn:D] Running Loop=1
2018-10-04T16:20:54.066Z,1538670054.066 [Default:CheckIn:D] Stopped
2018-10-04T16:20:54.066Z,1538670054.066 [Default:CheckIn:E] Running Loop=1
2018-10-04T16:20:54.469Z,1538670054.469 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 724.438281 min 
2018-10-04T16:20:54.469Z,1538670054.469 [Default:CheckIn:E] Stopped
2018-10-04T16:20:54.470Z,1538670054.470 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T16:20:54.470Z,1538670054.470 [Default:CheckIn] Stopped
2018-10-04T16:20:54.470Z,1538670054.470 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T16:20:54.470Z,1538670054.470 [Default:CheckIn](INFO): Running loop #71
2018-10-04T16:20:54.470Z,1538670054.470 [Default:CheckIn] Running Loop=71
2018-10-04T16:20:54.470Z,1538670054.470 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T16:20:54.470Z,1538670054.470 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T16:21:21.731Z,1538670081.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:21:21.731Z,1538670081.731 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-10-04T16:21:21.731Z,1538670081.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:21:21.753Z,1538670081.753 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:21:21.753Z,1538670081.753 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-10-04T16:21:21.754Z,1538670081.754 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:21:21.798Z,1538670081.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:21:21.798Z,1538670081.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:21:22.195Z,1538670082.195 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:21:22.195Z,1538670082.195 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-10-04T16:21:22.196Z,1538670082.196 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:21:22.196Z,1538670082.196 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-10-04T16:21:22.559Z,1538670082.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:21:22.560Z,1538670082.560 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:21:22.560Z,1538670082.560 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:21:22.561Z,1538670082.561 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:21:22.561Z,1538670082.561 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:21:22.562Z,1538670082.562 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:21:26.103Z,1538670086.103 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T16:21:26.103Z,1538670086.103 [NAL9602] Data Fault, FailCount= 1
2018-10-04T16:21:26.103Z,1538670086.103 [NAL9602](ERROR): Data Fault
2018-10-04T16:21:26.169Z,1538670086.169 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T16:21:26.503Z,1538670086.503 [NAL9602](INFO): Powering down
2018-10-04T16:21:27.360Z,1538670087.360 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T16:21:27.360Z,1538670087.360 [NAL9602] No Fault, FailCount= 1
2018-10-04T16:21:50.702Z,1538670110.702 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T16:21:50.702Z,1538670110.702 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100409264679,35.0, 0.0,1448.9,  0
2018-10-04T16:21:56.663Z,1538670116.663 [NAL9602](INFO): Powering up NAL9602
2018-10-04T16:22:07.462Z,1538670127.462 [NAL9602](INFO): NAL9602 initialized
2018-10-04T16:24:22.790Z,1538670262.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:24:22.790Z,1538670262.790 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-10-04T16:24:22.790Z,1538670262.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:24:22.792Z,1538670262.792 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:24:22.792Z,1538670262.792 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-10-04T16:24:22.792Z,1538670262.792 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:24:22.818Z,1538670262.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:24:22.818Z,1538670262.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:24:23.222Z,1538670263.222 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:24:23.222Z,1538670263.222 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-10-04T16:24:23.223Z,1538670263.223 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:24:23.223Z,1538670263.223 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-10-04T16:24:23.611Z,1538670263.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:24:23.612Z,1538670263.612 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:24:23.612Z,1538670263.612 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:24:23.613Z,1538670263.613 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:24:23.617Z,1538670263.617 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:24:23.618Z,1538670263.618 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:25:56.957Z,1538670356.957 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T16:20:54.5Z
2018-10-04T16:25:56.957Z,1538670356.957 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T16:25:56.957Z,1538670356.957 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T16:26:01.892Z,1538670361.892 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0214.lzma
2018-10-04T16:26:02.691Z,1538670362.691 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0214.lzma.bak
2018-10-04T16:26:02.691Z,1538670362.691 [DataOverHttps](INFO): SBD MOMSN=8610986
2018-10-04T16:26:11.937Z,1538670371.937 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0215.lzma
2018-10-04T16:26:12.680Z,1538670372.680 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0215.lzma.bak
2018-10-04T16:26:12.681Z,1538670372.681 [DataOverHttps](INFO): SBD MOMSN=8610988
2018-10-04T16:26:13.626Z,1538670373.626 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T16:26:13.626Z,1538670373.626 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T16:26:13.626Z,1538670373.626 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T16:27:23.875Z,1538670443.875 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:27:23.875Z,1538670443.875 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-10-04T16:27:23.875Z,1538670443.875 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:27:23.881Z,1538670443.881 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:27:23.882Z,1538670443.882 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-10-04T16:27:23.882Z,1538670443.882 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:27:23.907Z,1538670443.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:27:23.907Z,1538670443.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:27:24.294Z,1538670444.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:27:24.294Z,1538670444.294 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-10-04T16:27:24.295Z,1538670444.295 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:27:24.295Z,1538670444.295 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-10-04T16:27:24.689Z,1538670444.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:27:24.689Z,1538670444.689 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:27:24.690Z,1538670444.690 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:27:24.690Z,1538670444.690 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:27:24.691Z,1538670444.691 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:27:24.691Z,1538670444.691 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:28:18.054Z,1538670498.054 [RDI_Pathfinder](ERROR): only read 2 of 5 data items
2018-10-04T16:28:18.056Z,1538670498.056 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768-32768,V
2018-10-04T16:30:24.899Z,1538670624.899 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:30:24.899Z,1538670624.899 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-10-04T16:30:24.899Z,1538670624.899 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:30:24.901Z,1538670624.901 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:30:24.901Z,1538670624.901 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-10-04T16:30:24.901Z,1538670624.901 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:30:24.922Z,1538670624.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:30:24.923Z,1538670624.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:30:25.338Z,1538670625.338 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:30:25.338Z,1538670625.338 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-10-04T16:30:25.339Z,1538670625.339 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:30:25.339Z,1538670625.339 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-10-04T16:30:25.718Z,1538670625.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:30:25.718Z,1538670625.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:30:25.719Z,1538670625.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:30:25.719Z,1538670625.719 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:30:25.719Z,1538670625.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:30:25.720Z,1538670625.720 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:31:13.792Z,1538670673.792 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T16:31:13.794Z,1538670673.794 [Default:CheckIn:C.Wait] Stopped
2018-10-04T16:31:13.794Z,1538670673.794 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T16:31:13.794Z,1538670673.794 [Default:CheckIn:D] Running Loop=1
2018-10-04T16:31:14.197Z,1538670674.197 [Default:CheckIn:D] Stopped
2018-10-04T16:31:14.197Z,1538670674.197 [Default:CheckIn:E] Running Loop=1
2018-10-04T16:31:14.622Z,1538670674.622 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 734.773763 min 
2018-10-04T16:31:14.622Z,1538670674.622 [Default:CheckIn:E] Stopped
2018-10-04T16:31:14.622Z,1538670674.622 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T16:31:14.622Z,1538670674.622 [Default:CheckIn] Stopped
2018-10-04T16:31:14.622Z,1538670674.622 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T16:31:14.623Z,1538670674.623 [Default:CheckIn](INFO): Running loop #72
2018-10-04T16:31:14.623Z,1538670674.623 [Default:CheckIn] Running Loop=72
2018-10-04T16:31:14.623Z,1538670674.623 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T16:31:14.623Z,1538670674.623 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T16:32:10.419Z,1538670730.419 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T16:32:10.419Z,1538670730.419 [NAL9602] Data Fault, FailCount= 2
2018-10-04T16:32:10.419Z,1538670730.419 [NAL9602](ERROR): Data Fault
2018-10-04T16:32:10.488Z,1538670730.488 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T16:32:10.803Z,1538670730.803 [NAL9602](INFO): Powering down
2018-10-04T16:32:11.669Z,1538670731.669 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T16:32:11.670Z,1538670731.670 [NAL9602] No Fault, FailCount= 2
2018-10-04T16:32:41.195Z,1538670761.195 [NAL9602](INFO): Powering up NAL9602
2018-10-04T16:32:52.123Z,1538670772.123 [NAL9602](INFO): NAL9602 initialized
2018-10-04T16:33:25.897Z,1538670805.897 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:33:25.901Z,1538670805.901 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-10-04T16:33:25.901Z,1538670805.901 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:33:25.903Z,1538670805.903 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:33:25.903Z,1538670805.903 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-10-04T16:33:25.903Z,1538670805.903 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:33:25.932Z,1538670805.932 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:33:25.932Z,1538670805.932 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:33:26.310Z,1538670806.310 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:33:26.310Z,1538670806.310 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-10-04T16:33:26.311Z,1538670806.311 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:33:26.311Z,1538670806.311 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-10-04T16:33:26.730Z,1538670806.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:33:26.731Z,1538670806.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:33:26.731Z,1538670806.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:33:26.731Z,1538670806.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:33:26.732Z,1538670806.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:33:26.732Z,1538670806.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:36:19.768Z,1538670979.768 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T16:31:14.6Z
2018-10-04T16:36:19.768Z,1538670979.768 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T16:36:19.768Z,1538670979.768 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T16:36:27.774Z,1538670987.774 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:36:27.774Z,1538670987.774 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-10-04T16:36:27.774Z,1538670987.774 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:36:27.776Z,1538670987.776 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:36:27.776Z,1538670987.776 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-10-04T16:36:27.776Z,1538670987.776 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:36:27.834Z,1538670987.834 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:36:27.835Z,1538670987.835 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:36:27.909Z,1538670987.909 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0217.lzma
2018-10-04T16:36:28.056Z,1538670988.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:36:28.056Z,1538670988.056 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-10-04T16:36:28.056Z,1538670988.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:36:28.056Z,1538670988.056 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-10-04T16:36:28.383Z,1538670988.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:36:28.383Z,1538670988.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:36:28.384Z,1538670988.384 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:36:28.384Z,1538670988.384 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:36:28.384Z,1538670988.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:36:28.397Z,1538670988.397 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:36:28.654Z,1538670988.654 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0217.lzma.bak
2018-10-04T16:36:28.654Z,1538670988.654 [DataOverHttps](INFO): SBD MOMSN=8610992
2018-10-04T16:36:38.225Z,1538670998.225 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0218.lzma
2018-10-04T16:36:39.008Z,1538670999.008 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0218.lzma.bak
2018-10-04T16:36:39.009Z,1538670999.009 [DataOverHttps](INFO): SBD MOMSN=8610994
2018-10-04T16:36:39.931Z,1538670999.931 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T16:36:39.931Z,1538670999.931 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T16:36:39.931Z,1538670999.931 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T16:39:28.695Z,1538671168.695 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:39:28.695Z,1538671168.695 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-10-04T16:39:28.695Z,1538671168.695 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:39:28.697Z,1538671168.697 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:39:28.697Z,1538671168.697 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-10-04T16:39:28.697Z,1538671168.697 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:39:28.722Z,1538671168.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:39:28.723Z,1538671168.723 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:39:29.090Z,1538671169.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:39:29.090Z,1538671169.090 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-10-04T16:39:29.091Z,1538671169.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:39:29.091Z,1538671169.091 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-10-04T16:39:29.560Z,1538671169.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:39:29.560Z,1538671169.560 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:39:29.561Z,1538671169.561 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:39:29.562Z,1538671169.562 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:39:29.562Z,1538671169.562 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:39:29.563Z,1538671169.563 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:40:19.316Z,1538671219.316 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-04T16:40:19.317Z,1538671219.317 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,     ,        +0.00,        +0.00,   0.00,1660.88
2018-10-04T16:41:40.217Z,1538671300.217 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T16:41:40.217Z,1538671300.217 [Default:CheckIn:C.Wait] Stopped
2018-10-04T16:41:40.217Z,1538671300.217 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T16:41:40.217Z,1538671300.217 [Default:CheckIn:D] Running Loop=1
2018-10-04T16:41:40.613Z,1538671300.613 [Default:CheckIn:D] Stopped
2018-10-04T16:41:40.613Z,1538671300.613 [Default:CheckIn:E] Running Loop=1
2018-10-04T16:41:41.013Z,1538671301.013 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 745.214062 min 
2018-10-04T16:41:41.013Z,1538671301.013 [Default:CheckIn:E] Stopped
2018-10-04T16:41:41.013Z,1538671301.013 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T16:41:41.014Z,1538671301.014 [Default:CheckIn] Stopped
2018-10-04T16:41:41.014Z,1538671301.014 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T16:41:41.014Z,1538671301.014 [Default:CheckIn](INFO): Running loop #73
2018-10-04T16:41:41.014Z,1538671301.014 [Default:CheckIn] Running Loop=73
2018-10-04T16:41:41.014Z,1538671301.014 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T16:41:41.014Z,1538671301.014 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T16:41:55.380Z,1538671315.380 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T16:42:29.885Z,1538671349.885 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:42:29.885Z,1538671349.885 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-10-04T16:42:29.885Z,1538671349.885 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:42:29.887Z,1538671349.887 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:42:29.887Z,1538671349.887 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-10-04T16:42:29.888Z,1538671349.888 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:42:29.900Z,1538671349.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:42:29.901Z,1538671349.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:42:30.300Z,1538671350.300 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-04T16:42:30.301Z,1538671350.301 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +     +0.00,        +0.00,   0.00,1791.86
2018-10-04T16:42:30.345Z,1538671350.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:42:30.345Z,1538671350.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-10-04T16:42:30.346Z,1538671350.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:42:30.346Z,1538671350.346 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-10-04T16:42:30.698Z,1538671350.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:42:30.698Z,1538671350.698 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:42:30.699Z,1538671350.699 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:42:30.699Z,1538671350.699 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:42:30.699Z,1538671350.699 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:42:30.700Z,1538671350.700 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:42:53.203Z,1538671373.203 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T16:42:53.203Z,1538671373.203 [NAL9602] Data Fault, FailCount= 3
2018-10-04T16:42:53.203Z,1538671373.203 [NAL9602](ERROR): Data Fault
2018-10-04T16:42:53.290Z,1538671373.290 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T16:42:53.599Z,1538671373.599 [NAL9602](INFO): Powering down
2018-10-04T16:42:54.464Z,1538671374.464 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T16:42:54.464Z,1538671374.464 [NAL9602] No Fault, FailCount= 3
2018-10-04T16:43:12.568Z,1538671392.568 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T16:43:23.740Z,1538671403.740 [NAL9602](INFO): Powering up NAL9602
2018-10-04T16:43:34.939Z,1538671414.939 [NAL9602](INFO): NAL9602 initialized
2018-10-04T16:45:32.435Z,1538671532.435 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:45:32.436Z,1538671532.436 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-10-04T16:45:32.436Z,1538671532.436 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:45:32.438Z,1538671532.438 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:45:32.438Z,1538671532.438 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-10-04T16:45:32.438Z,1538671532.438 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:45:32.451Z,1538671532.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:45:32.451Z,1538671532.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:45:32.586Z,1538671532.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:45:32.586Z,1538671532.586 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-10-04T16:45:32.587Z,1538671532.587 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:45:32.587Z,1538671532.587 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-10-04T16:45:32.944Z,1538671532.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:45:32.944Z,1538671532.944 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:45:32.949Z,1538671532.949 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:45:32.949Z,1538671532.949 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:45:32.950Z,1538671532.950 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:45:32.950Z,1538671532.950 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:46:43.078Z,1538671603.078 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T16:41:41.0Z
2018-10-04T16:46:43.078Z,1538671603.078 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T16:46:43.078Z,1538671603.078 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T16:46:48.005Z,1538671608.005 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0220.lzma
2018-10-04T16:46:48.856Z,1538671608.856 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0220.lzma.bak
2018-10-04T16:46:48.856Z,1538671608.856 [DataOverHttps](INFO): SBD MOMSN=8610998
2018-10-04T16:46:58.024Z,1538671618.024 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0221.lzma
2018-10-04T16:47:01.533Z,1538671621.533 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0221.lzma.bak
2018-10-04T16:47:01.533Z,1538671621.533 [DataOverHttps](INFO): SBD MOMSN=8611000
2018-10-04T16:47:02.306Z,1538671622.306 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T16:47:02.306Z,1538671622.306 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T16:47:02.306Z,1538671622.306 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T16:48:33.195Z,1538671713.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:48:33.195Z,1538671713.195 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-10-04T16:48:33.195Z,1538671713.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:48:33.197Z,1538671713.197 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:48:33.197Z,1538671713.197 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-10-04T16:48:33.197Z,1538671713.197 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:48:33.239Z,1538671713.239 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:48:33.239Z,1538671713.239 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:48:33.662Z,1538671713.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:48:33.662Z,1538671713.662 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-10-04T16:48:33.663Z,1538671713.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:48:33.663Z,1538671713.663 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-10-04T16:48:34.030Z,1538671714.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:48:34.031Z,1538671714.031 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:48:34.031Z,1538671714.031 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:48:34.031Z,1538671714.031 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:48:34.032Z,1538671714.032 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:48:34.032Z,1538671714.032 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:51:34.035Z,1538671894.035 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:51:34.035Z,1538671894.035 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-10-04T16:51:34.035Z,1538671894.035 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:51:34.061Z,1538671894.061 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:51:34.061Z,1538671894.061 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-10-04T16:51:34.062Z,1538671894.062 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:51:34.111Z,1538671894.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:51:34.111Z,1538671894.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:51:34.526Z,1538671894.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:51:34.526Z,1538671894.526 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-10-04T16:51:34.526Z,1538671894.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:51:34.527Z,1538671894.527 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-10-04T16:51:34.842Z,1538671894.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:51:34.842Z,1538671894.842 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:51:34.843Z,1538671894.843 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:51:34.843Z,1538671894.843 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:51:34.843Z,1538671894.843 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:51:34.844Z,1538671894.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:52:02.563Z,1538671922.563 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T16:52:02.563Z,1538671922.563 [Default:CheckIn:C.Wait] Stopped
2018-10-04T16:52:02.563Z,1538671922.563 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T16:52:02.564Z,1538671922.564 [Default:CheckIn:D] Running Loop=1
2018-10-04T16:52:02.969Z,1538671922.969 [Default:CheckIn:D] Stopped
2018-10-04T16:52:02.969Z,1538671922.969 [Default:CheckIn:E] Running Loop=1
2018-10-04T16:52:03.370Z,1538671923.370 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 755.586654 min 
2018-10-04T16:52:03.371Z,1538671923.371 [Default:CheckIn:E] Stopped
2018-10-04T16:52:03.371Z,1538671923.371 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T16:52:03.371Z,1538671923.371 [Default:CheckIn] Stopped
2018-10-04T16:52:03.371Z,1538671923.371 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T16:52:03.371Z,1538671923.371 [Default:CheckIn](INFO): Running loop #74
2018-10-04T16:52:03.371Z,1538671923.371 [Default:CheckIn] Running Loop=74
2018-10-04T16:52:03.372Z,1538671923.372 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T16:52:03.372Z,1538671923.372 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T16:52:59.573Z,1538671979.573 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T16:53:36.027Z,1538672016.027 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T16:53:36.027Z,1538672016.027 [NAL9602] Data Fault, FailCount= 4
2018-10-04T16:53:36.027Z,1538672016.027 [NAL9602](ERROR): Data Fault
2018-10-04T16:53:36.089Z,1538672016.089 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T16:53:36.427Z,1538672016.427 [NAL9602](INFO): Powering down
2018-10-04T16:53:37.303Z,1538672017.303 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T16:53:37.303Z,1538672017.303 [NAL9602] No Fault, FailCount= 4
2018-10-04T16:54:08.805Z,1538672048.805 [NAL9602](INFO): Powering up NAL9602
2018-10-04T16:54:19.719Z,1538672059.719 [NAL9602](INFO): NAL9602 initialized
2018-10-04T16:54:34.983Z,1538672074.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:54:34.983Z,1538672074.983 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-10-04T16:54:34.983Z,1538672074.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:54:34.985Z,1538672074.985 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:54:34.985Z,1538672074.985 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-10-04T16:54:34.985Z,1538672074.985 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:54:35.042Z,1538672075.042 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:54:35.042Z,1538672075.042 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:54:35.399Z,1538672075.399 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:54:35.400Z,1538672075.400 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-10-04T16:54:35.400Z,1538672075.400 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:54:35.400Z,1538672075.400 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-10-04T16:54:35.795Z,1538672075.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:54:35.796Z,1538672075.796 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:54:35.796Z,1538672075.796 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:54:35.797Z,1538672075.797 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:54:35.797Z,1538672075.797 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:54:35.798Z,1538672075.798 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:56:03.675Z,1538672163.675 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T16:56:03.675Z,1538672163.675 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,
2018-10-04T16:57:05.383Z,1538672225.383 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T16:52:03.4Z
2018-10-04T16:57:05.383Z,1538672225.383 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T16:57:05.383Z,1538672225.383 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T16:57:10.360Z,1538672230.360 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0223.lzma
2018-10-04T16:57:11.128Z,1538672231.128 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0223.lzma.bak
2018-10-04T16:57:11.129Z,1538672231.129 [DataOverHttps](INFO): SBD MOMSN=8611004
2018-10-04T16:57:20.389Z,1538672240.389 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0224.lzma
2018-10-04T16:57:21.148Z,1538672241.148 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0224.lzma.bak
2018-10-04T16:57:21.148Z,1538672241.148 [DataOverHttps](INFO): SBD MOMSN=8611006
2018-10-04T16:57:22.089Z,1538672242.089 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T16:57:22.089Z,1538672242.089 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T16:57:22.090Z,1538672242.090 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T16:57:35.867Z,1538672255.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:57:35.867Z,1538672255.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-10-04T16:57:35.867Z,1538672255.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T16:57:35.869Z,1538672255.869 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T16:57:35.869Z,1538672255.869 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-10-04T16:57:35.869Z,1538672255.869 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T16:57:35.911Z,1538672255.911 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T16:57:35.911Z,1538672255.911 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T16:57:36.275Z,1538672256.275 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T16:57:36.275Z,1538672256.275 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-10-04T16:57:36.276Z,1538672256.276 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T16:57:36.276Z,1538672256.276 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-10-04T16:57:36.672Z,1538672256.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T16:57:36.673Z,1538672256.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:57:36.673Z,1538672256.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T16:57:36.674Z,1538672256.674 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T16:57:36.674Z,1538672256.674 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T16:57:36.674Z,1538672256.674 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:00:23.551Z,1538672423.551 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T17:00:36.767Z,1538672436.767 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:00:36.767Z,1538672436.767 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-10-04T17:00:36.767Z,1538672436.767 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:00:36.773Z,1538672436.773 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:00:36.773Z,1538672436.773 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-10-04T17:00:36.773Z,1538672436.773 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:00:36.800Z,1538672436.800 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:00:36.800Z,1538672436.800 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:00:37.175Z,1538672437.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:00:37.175Z,1538672437.175 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-10-04T17:00:37.176Z,1538672437.176 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:00:37.176Z,1538672437.176 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-10-04T17:00:37.545Z,1538672437.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:00:37.546Z,1538672437.546 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:00:37.546Z,1538672437.546 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:00:37.547Z,1538672437.547 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:00:37.547Z,1538672437.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:00:37.548Z,1538672437.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:02:22.511Z,1538672542.511 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T17:02:22.511Z,1538672542.511 [Default:CheckIn:C.Wait] Stopped
2018-10-04T17:02:22.511Z,1538672542.511 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T17:02:22.511Z,1538672542.511 [Default:CheckIn:D] Running Loop=1
2018-10-04T17:02:22.883Z,1538672542.883 [Default:CheckIn:D] Stopped
2018-10-04T17:02:22.883Z,1538672542.883 [Default:CheckIn:E] Running Loop=1
2018-10-04T17:02:23.292Z,1538672543.292 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 765.918555 min 
2018-10-04T17:02:23.292Z,1538672543.292 [Default:CheckIn:E] Stopped
2018-10-04T17:02:23.292Z,1538672543.292 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T17:02:23.293Z,1538672543.293 [Default:CheckIn] Stopped
2018-10-04T17:02:23.297Z,1538672543.297 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T17:02:23.297Z,1538672543.297 [Default:CheckIn](INFO): Running loop #75
2018-10-04T17:02:23.297Z,1538672543.297 [Default:CheckIn] Running Loop=75
2018-10-04T17:02:23.297Z,1538672543.297 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T17:02:23.297Z,1538672543.297 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T17:02:44.571Z,1538672564.571 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-04T17:03:37.902Z,1538672617.902 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:03:37.902Z,1538672617.902 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-10-04T17:03:37.902Z,1538672617.902 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:03:37.904Z,1538672617.904 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:03:37.904Z,1538672617.904 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-10-04T17:03:37.904Z,1538672617.904 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:03:37.934Z,1538672617.934 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:03:37.934Z,1538672617.934 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:03:38.352Z,1538672618.352 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:03:38.353Z,1538672618.353 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-10-04T17:03:38.357Z,1538672618.357 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:03:38.357Z,1538672618.357 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-10-04T17:03:38.709Z,1538672618.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:03:38.709Z,1538672618.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:03:38.710Z,1538672618.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:03:38.710Z,1538672618.710 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:03:38.710Z,1538672618.710 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:03:38.711Z,1538672618.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:04:20.763Z,1538672660.763 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T17:04:20.763Z,1538672660.763 [NAL9602] Data Fault, FailCount= 5
2018-10-04T17:04:20.763Z,1538672660.763 [NAL9602](ERROR): Data Fault
2018-10-04T17:04:20.840Z,1538672660.840 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T17:04:20.845Z,1538672660.845 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T17:04:21.163Z,1538672661.163 [NAL9602](INFO): Powering down
2018-10-04T17:04:21.253Z,1538672661.253 [CBIT](INFO): Critical error at 20181004T170420
2018-10-04T17:06:20.802Z,1538672780.802 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T17:06:20.803Z,1538672780.803 [NAL9602] No Fault, FailCount= 5
2018-10-04T17:06:21.145Z,1538672781.145 [NAL9602](INFO): Powering up NAL9602
2018-10-04T17:06:31.951Z,1538672791.951 [NAL9602](INFO): NAL9602 initialized
2018-10-04T17:06:38.802Z,1538672798.802 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:06:38.802Z,1538672798.802 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-10-04T17:06:38.802Z,1538672798.802 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:06:38.804Z,1538672798.804 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:06:38.804Z,1538672798.804 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-10-04T17:06:38.804Z,1538672798.804 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:06:38.830Z,1538672798.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:06:38.830Z,1538672798.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:06:39.224Z,1538672799.224 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:06:39.224Z,1538672799.224 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-10-04T17:06:39.229Z,1538672799.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:06:39.230Z,1538672799.230 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-10-04T17:06:39.608Z,1538672799.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:06:39.609Z,1538672799.609 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:06:39.610Z,1538672799.610 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:06:39.610Z,1538672799.610 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:06:39.611Z,1538672799.611 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:06:39.611Z,1538672799.611 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:07:25.776Z,1538672845.776 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T17:02:23.3Z
2018-10-04T17:07:25.776Z,1538672845.776 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T17:07:25.776Z,1538672845.776 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T17:07:26.462Z,1538672846.462 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0226.lzma
2018-10-04T17:07:27.404Z,1538672847.404 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0226.lzma.bak
2018-10-04T17:07:27.405Z,1538672847.405 [DataOverHttps](INFO): SBD MOMSN=8611010
2018-10-04T17:07:40.297Z,1538672860.297 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0227.lzma
2018-10-04T17:07:41.485Z,1538672861.485 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0227.lzma.bak
2018-10-04T17:07:41.485Z,1538672861.485 [DataOverHttps](INFO): SBD MOMSN=8611013
2018-10-04T17:07:42.450Z,1538672862.450 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T17:07:42.450Z,1538672862.450 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T17:07:42.450Z,1538672862.450 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T17:09:39.727Z,1538672979.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:09:39.727Z,1538672979.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-10-04T17:09:39.728Z,1538672979.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:09:39.730Z,1538672979.730 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:09:39.730Z,1538672979.730 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-10-04T17:09:39.730Z,1538672979.730 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:09:39.771Z,1538672979.771 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:09:39.771Z,1538672979.771 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:09:40.156Z,1538672980.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:09:40.156Z,1538672980.156 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-10-04T17:09:40.157Z,1538672980.157 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:09:40.157Z,1538672980.157 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-10-04T17:09:40.557Z,1538672980.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:09:40.558Z,1538672980.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:09:40.558Z,1538672980.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:09:40.559Z,1538672980.559 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:09:40.559Z,1538672980.559 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:09:40.559Z,1538672980.559 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:12:29.567Z,1538673149.567 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T17:12:40.773Z,1538673160.773 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:12:40.773Z,1538673160.773 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-10-04T17:12:40.773Z,1538673160.773 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:12:40.775Z,1538673160.775 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:12:40.775Z,1538673160.775 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-10-04T17:12:40.775Z,1538673160.775 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:12:40.788Z,1538673160.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:12:40.788Z,1538673160.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:12:41.196Z,1538673161.196 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:12:41.196Z,1538673161.196 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-10-04T17:12:41.196Z,1538673161.196 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:12:41.197Z,1538673161.197 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-10-04T17:12:41.580Z,1538673161.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:12:41.581Z,1538673161.581 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:12:41.581Z,1538673161.581 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:12:41.582Z,1538673161.582 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:12:41.582Z,1538673161.582 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:12:41.583Z,1538673161.583 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:12:42.788Z,1538673162.788 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T17:12:42.789Z,1538673162.789 [Default:CheckIn:C.Wait] Stopped
2018-10-04T17:12:42.789Z,1538673162.789 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T17:12:42.789Z,1538673162.789 [Default:CheckIn:D] Running Loop=1
2018-10-04T17:12:43.187Z,1538673163.187 [Default:CheckIn:D] Stopped
2018-10-04T17:12:43.187Z,1538673163.187 [Default:CheckIn:E] Running Loop=1
2018-10-04T17:12:43.585Z,1538673163.585 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 776.256966 min 
2018-10-04T17:12:43.585Z,1538673163.585 [Default:CheckIn:E] Stopped
2018-10-04T17:12:43.585Z,1538673163.585 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T17:12:43.585Z,1538673163.585 [Default:CheckIn] Stopped
2018-10-04T17:12:43.586Z,1538673163.586 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T17:12:43.586Z,1538673163.586 [Default:CheckIn](INFO): Running loop #76
2018-10-04T17:12:43.586Z,1538673163.586 [Default:CheckIn] Running Loop=76
2018-10-04T17:12:43.586Z,1538673163.586 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T17:12:43.586Z,1538673163.586 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T17:15:41.759Z,1538673341.759 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:15:41.759Z,1538673341.759 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-10-04T17:15:41.759Z,1538673341.759 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:15:41.765Z,1538673341.765 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:15:41.765Z,1538673341.765 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-10-04T17:15:41.766Z,1538673341.766 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:15:41.797Z,1538673341.797 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:15:41.797Z,1538673341.797 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:15:42.183Z,1538673342.183 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:15:42.183Z,1538673342.183 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-10-04T17:15:42.183Z,1538673342.183 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:15:42.183Z,1538673342.183 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-10-04T17:15:42.590Z,1538673342.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:15:42.590Z,1538673342.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:15:42.590Z,1538673342.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:15:42.591Z,1538673342.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:15:42.591Z,1538673342.591 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:15:42.592Z,1538673342.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:16:35.455Z,1538673395.455 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T17:16:35.455Z,1538673395.455 [NAL9602] Data Fault, FailCount= 1
2018-10-04T17:16:35.455Z,1538673395.455 [NAL9602](ERROR): Data Fault
2018-10-04T17:16:35.536Z,1538673395.536 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T17:16:35.613Z,1538673395.613 [NAL9602](INFO): Powering down
2018-10-04T17:16:36.436Z,1538673396.436 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T17:16:36.436Z,1538673396.436 [NAL9602] No Fault, FailCount= 1
2018-10-04T17:17:05.959Z,1538673425.959 [NAL9602](INFO): Powering up NAL9602
2018-10-04T17:17:16.843Z,1538673436.843 [NAL9602](INFO): NAL9602 initialized
2018-10-04T17:17:46.082Z,1538673466.082 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T17:12:43.6Z
2018-10-04T17:17:46.082Z,1538673466.082 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T17:17:46.082Z,1538673466.082 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T17:17:51.488Z,1538673471.488 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0229.lzma
2018-10-04T17:17:52.268Z,1538673472.268 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0229.lzma.bak
2018-10-04T17:17:52.269Z,1538673472.269 [DataOverHttps](INFO): SBD MOMSN=8611017
2018-10-04T17:18:02.124Z,1538673482.124 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0230.lzma
2018-10-04T17:18:02.873Z,1538673482.873 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0230.lzma.bak
2018-10-04T17:18:02.873Z,1538673482.873 [DataOverHttps](INFO): SBD MOMSN=8611019
2018-10-04T17:18:03.854Z,1538673483.854 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T17:18:03.854Z,1538673483.854 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T17:18:03.854Z,1538673483.854 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T17:18:42.849Z,1538673522.849 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:18:42.849Z,1538673522.849 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-10-04T17:18:42.849Z,1538673522.849 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:18:42.851Z,1538673522.851 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:18:42.851Z,1538673522.851 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-10-04T17:18:42.851Z,1538673522.851 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:18:42.864Z,1538673522.864 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:18:42.864Z,1538673522.864 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:18:42.988Z,1538673522.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:18:42.989Z,1538673522.989 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-10-04T17:18:42.993Z,1538673522.993 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:18:42.993Z,1538673522.993 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-10-04T17:18:43.343Z,1538673523.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:18:43.344Z,1538673523.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:18:43.344Z,1538673523.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:18:43.345Z,1538673523.345 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:18:43.345Z,1538673523.345 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:18:43.346Z,1538673523.346 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:21:43.539Z,1538673703.539 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:21:43.539Z,1538673703.539 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-10-04T17:21:43.539Z,1538673703.539 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:21:43.557Z,1538673703.557 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:21:43.557Z,1538673703.557 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-10-04T17:21:43.557Z,1538673703.557 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:21:43.579Z,1538673703.579 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:21:43.579Z,1538673703.579 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:21:43.978Z,1538673703.978 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:21:43.978Z,1538673703.978 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-10-04T17:21:43.978Z,1538673703.978 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:21:43.978Z,1538673703.978 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-10-04T17:21:44.375Z,1538673704.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:21:44.376Z,1538673704.376 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:21:44.376Z,1538673704.376 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:21:44.376Z,1538673704.376 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:21:44.377Z,1538673704.377 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:21:44.377Z,1538673704.377 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:23:04.163Z,1538673784.163 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T17:23:04.163Z,1538673784.163 [Default:CheckIn:C.Wait] Stopped
2018-10-04T17:23:04.163Z,1538673784.163 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T17:23:04.164Z,1538673784.164 [Default:CheckIn:D] Running Loop=1
2018-10-04T17:23:04.587Z,1538673784.587 [Default:CheckIn:D] Stopped
2018-10-04T17:23:04.587Z,1538673784.587 [Default:CheckIn:E] Running Loop=1
2018-10-04T17:23:04.965Z,1538673784.965 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 786.613672 min 
2018-10-04T17:23:04.966Z,1538673784.966 [Default:CheckIn:E] Stopped
2018-10-04T17:23:04.966Z,1538673784.966 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T17:23:04.966Z,1538673784.966 [Default:CheckIn] Stopped
2018-10-04T17:23:04.966Z,1538673784.966 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T17:23:04.966Z,1538673784.966 [Default:CheckIn](INFO): Running loop #77
2018-10-04T17:23:04.966Z,1538673784.966 [Default:CheckIn] Running Loop=77
2018-10-04T17:23:04.966Z,1538673784.966 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T17:23:04.966Z,1538673784.966 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T17:24:44.553Z,1538673884.553 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:24:44.553Z,1538673884.553 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-10-04T17:24:44.553Z,1538673884.553 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:24:44.555Z,1538673884.555 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:24:44.555Z,1538673884.555 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-10-04T17:24:44.555Z,1538673884.555 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:24:44.584Z,1538673884.584 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:24:44.585Z,1538673884.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:24:44.954Z,1538673884.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:24:44.954Z,1538673884.954 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-10-04T17:24:44.955Z,1538673884.955 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:24:44.955Z,1538673884.955 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-10-04T17:24:45.334Z,1538673885.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:24:45.334Z,1538673885.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:24:45.335Z,1538673885.335 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:24:45.335Z,1538673885.335 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:24:45.335Z,1538673885.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:24:45.336Z,1538673885.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:27:18.243Z,1538674038.243 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T17:27:18.243Z,1538674038.243 [NAL9602] Data Fault, FailCount= 2
2018-10-04T17:27:18.243Z,1538674038.243 [NAL9602](ERROR): Data Fault
2018-10-04T17:27:18.337Z,1538674038.337 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T17:27:18.635Z,1538674038.635 [NAL9602](INFO): Powering down
2018-10-04T17:27:19.542Z,1538674039.542 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T17:27:19.542Z,1538674039.542 [NAL9602] No Fault, FailCount= 2
2018-10-04T17:27:45.546Z,1538674065.546 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:27:45.546Z,1538674065.546 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-10-04T17:27:45.546Z,1538674065.546 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:27:45.548Z,1538674065.548 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:27:45.548Z,1538674065.548 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-10-04T17:27:45.548Z,1538674065.548 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:27:45.577Z,1538674065.577 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:27:45.578Z,1538674065.578 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:27:45.951Z,1538674065.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:27:45.952Z,1538674065.952 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-10-04T17:27:45.952Z,1538674065.952 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:27:45.952Z,1538674065.952 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-10-04T17:27:46.346Z,1538674066.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:27:46.346Z,1538674066.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:27:46.347Z,1538674066.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:27:46.347Z,1538674066.347 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:27:46.347Z,1538674066.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:27:46.348Z,1538674066.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:27:48.703Z,1538674068.703 [NAL9602](INFO): Powering up NAL9602
2018-10-04T17:27:59.503Z,1538674079.503 [NAL9602](INFO): NAL9602 initialized
2018-10-04T17:28:07.136Z,1538674087.136 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T17:23:04.0Z
2018-10-04T17:28:07.136Z,1538674087.136 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T17:28:07.136Z,1538674087.136 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T17:28:12.062Z,1538674092.062 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0232.lzma
2018-10-04T17:28:12.837Z,1538674092.837 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0232.lzma.bak
2018-10-04T17:28:12.837Z,1538674092.837 [DataOverHttps](INFO): SBD MOMSN=8611023
2018-10-04T17:28:22.010Z,1538674102.010 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0233.lzma
2018-10-04T17:28:22.788Z,1538674102.788 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0233.lzma.bak
2018-10-04T17:28:22.788Z,1538674102.788 [DataOverHttps](INFO): SBD MOMSN=8611025
2018-10-04T17:28:23.744Z,1538674103.744 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T17:28:23.744Z,1538674103.744 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T17:28:23.744Z,1538674103.744 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T17:30:48.560Z,1538674248.560 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:30:48.560Z,1538674248.560 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-10-04T17:30:48.561Z,1538674248.561 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:30:48.563Z,1538674248.563 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:30:48.563Z,1538674248.563 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-10-04T17:30:48.563Z,1538674248.563 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:30:48.576Z,1538674248.576 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:30:48.576Z,1538674248.576 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:30:48.709Z,1538674248.709 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:30:48.709Z,1538674248.709 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-10-04T17:30:48.710Z,1538674248.710 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:30:48.710Z,1538674248.710 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-10-04T17:30:49.060Z,1538674249.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:30:49.061Z,1538674249.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:30:49.061Z,1538674249.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:30:49.062Z,1538674249.062 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:30:49.062Z,1538674249.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:30:49.062Z,1538674249.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:33:24.056Z,1538674404.056 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T17:33:24.056Z,1538674404.056 [Default:CheckIn:C.Wait] Stopped
2018-10-04T17:33:24.057Z,1538674404.057 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T17:33:24.057Z,1538674404.057 [Default:CheckIn:D] Running Loop=1
2018-10-04T17:33:24.465Z,1538674404.465 [Default:CheckIn:D] Stopped
2018-10-04T17:33:24.465Z,1538674404.465 [Default:CheckIn:E] Running Loop=1
2018-10-04T17:33:24.842Z,1538674404.842 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 796.944922 min 
2018-10-04T17:33:24.842Z,1538674404.842 [Default:CheckIn:E] Stopped
2018-10-04T17:33:24.842Z,1538674404.842 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T17:33:24.842Z,1538674404.842 [Default:CheckIn] Stopped
2018-10-04T17:33:24.842Z,1538674404.842 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T17:33:24.843Z,1538674404.843 [Default:CheckIn](INFO): Running loop #78
2018-10-04T17:33:24.843Z,1538674404.843 [Default:CheckIn] Running Loop=78
2018-10-04T17:33:24.843Z,1538674404.843 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T17:33:24.843Z,1538674404.843 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T17:33:49.363Z,1538674429.363 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:33:49.363Z,1538674429.363 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-10-04T17:33:49.363Z,1538674429.363 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:33:49.365Z,1538674429.365 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:33:49.365Z,1538674429.365 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-10-04T17:33:49.366Z,1538674429.366 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:33:49.395Z,1538674429.395 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:33:49.395Z,1538674429.395 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:33:49.777Z,1538674429.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:33:49.777Z,1538674429.777 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-10-04T17:33:49.778Z,1538674429.778 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:33:49.778Z,1538674429.778 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-10-04T17:33:50.171Z,1538674430.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:33:50.171Z,1538674430.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:33:50.172Z,1538674430.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:33:50.172Z,1538674430.172 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:33:50.172Z,1538674430.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:33:50.173Z,1538674430.173 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:36:50.305Z,1538674610.305 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:36:50.306Z,1538674610.306 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-10-04T17:36:50.306Z,1538674610.306 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:36:50.308Z,1538674610.308 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:36:50.308Z,1538674610.308 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-10-04T17:36:50.308Z,1538674610.308 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:36:50.337Z,1538674610.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:36:50.337Z,1538674610.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:36:50.708Z,1538674610.708 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:36:50.708Z,1538674610.708 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-10-04T17:36:50.709Z,1538674610.709 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:36:50.709Z,1538674610.709 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-10-04T17:36:51.078Z,1538674611.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:36:51.079Z,1538674611.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:36:51.079Z,1538674611.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:36:51.079Z,1538674611.079 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:36:51.080Z,1538674611.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:36:51.080Z,1538674611.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:38:00.855Z,1538674680.855 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T17:38:00.855Z,1538674680.855 [NAL9602] Data Fault, FailCount= 3
2018-10-04T17:38:00.855Z,1538674680.855 [NAL9602](ERROR): Data Fault
2018-10-04T17:38:00.936Z,1538674680.936 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T17:38:01.255Z,1538674681.255 [NAL9602](INFO): Powering down
2018-10-04T17:38:02.113Z,1538674682.113 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T17:38:02.113Z,1538674682.113 [NAL9602] No Fault, FailCount= 3
2018-10-04T17:38:27.276Z,1538674707.276 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T17:33:24.8Z
2018-10-04T17:38:27.276Z,1538674707.276 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T17:38:27.277Z,1538674707.277 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T17:38:32.063Z,1538674712.063 [NAL9602](INFO): Powering up NAL9602
2018-10-04T17:38:32.220Z,1538674712.220 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0235.lzma
2018-10-04T17:38:32.980Z,1538674712.980 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0235.lzma.bak
2018-10-04T17:38:32.980Z,1538674712.980 [DataOverHttps](INFO): SBD MOMSN=8611029
2018-10-04T17:38:42.137Z,1538674722.137 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0236.lzma
2018-10-04T17:38:42.924Z,1538674722.924 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0236.lzma.bak
2018-10-04T17:38:42.929Z,1538674722.929 [DataOverHttps](INFO): SBD MOMSN=8611031
2018-10-04T17:38:42.951Z,1538674722.951 [NAL9602](INFO): NAL9602 initialized
2018-10-04T17:38:43.863Z,1538674723.863 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T17:38:43.863Z,1538674723.863 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T17:38:43.863Z,1538674723.863 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T17:39:37.762Z,1538674777.762 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-04T17:39:51.352Z,1538674791.352 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:39:51.352Z,1538674791.352 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-10-04T17:39:51.352Z,1538674791.352 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:39:51.354Z,1538674791.354 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:39:51.354Z,1538674791.354 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-10-04T17:39:51.354Z,1538674791.354 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:39:51.392Z,1538674791.392 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:39:51.392Z,1538674791.392 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:39:51.772Z,1538674791.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:39:51.774Z,1538674791.774 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-10-04T17:39:51.774Z,1538674791.774 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:39:51.774Z,1538674791.774 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-10-04T17:39:52.127Z,1538674792.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:39:52.128Z,1538674792.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:39:52.128Z,1538674792.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:39:52.129Z,1538674792.129 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:39:52.129Z,1538674792.129 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:39:52.130Z,1538674792.130 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:42:54.730Z,1538674974.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:42:54.730Z,1538674974.730 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-10-04T17:42:54.730Z,1538674974.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:42:54.732Z,1538674974.732 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:42:54.732Z,1538674974.732 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-10-04T17:42:54.732Z,1538674974.732 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:42:54.757Z,1538674974.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:42:54.758Z,1538674974.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:42:54.859Z,1538674974.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:42:54.859Z,1538674974.859 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-10-04T17:42:54.860Z,1538674974.860 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:42:54.860Z,1538674974.860 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-10-04T17:42:55.226Z,1538674975.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:42:55.226Z,1538674975.226 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:42:55.226Z,1538674975.226 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:42:55.227Z,1538674975.227 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:42:55.227Z,1538674975.227 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:42:55.228Z,1538674975.228 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:43:43.976Z,1538675023.976 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T17:43:43.977Z,1538675023.977 [Default:CheckIn:C.Wait] Stopped
2018-10-04T17:43:43.977Z,1538675023.977 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T17:43:43.977Z,1538675023.977 [Default:CheckIn:D] Running Loop=1
2018-10-04T17:43:44.350Z,1538675024.350 [Default:CheckIn:D] Stopped
2018-10-04T17:43:44.350Z,1538675024.350 [Default:CheckIn:E] Running Loop=1
2018-10-04T17:43:44.725Z,1538675024.725 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 807.276367 min 
2018-10-04T17:43:44.726Z,1538675024.726 [Default:CheckIn:E] Stopped
2018-10-04T17:43:44.726Z,1538675024.726 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T17:43:44.726Z,1538675024.726 [Default:CheckIn] Stopped
2018-10-04T17:43:44.726Z,1538675024.726 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T17:43:44.726Z,1538675024.726 [Default:CheckIn](INFO): Running loop #79
2018-10-04T17:43:44.726Z,1538675024.726 [Default:CheckIn] Running Loop=79
2018-10-04T17:43:44.726Z,1538675024.726 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T17:43:44.726Z,1538675024.726 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T17:44:19.572Z,1538675059.572 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T17:44:19.572Z,1538675059.572 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100410491579,35.0
2018-10-04T17:45:16.643Z,1538675116.643 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T17:45:55.606Z,1538675155.606 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:45:55.606Z,1538675155.606 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-10-04T17:45:55.606Z,1538675155.606 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:45:55.608Z,1538675155.608 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:45:55.608Z,1538675155.608 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-10-04T17:45:55.608Z,1538675155.608 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:45:55.621Z,1538675155.621 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:45:55.622Z,1538675155.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:45:56.013Z,1538675156.013 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:45:56.013Z,1538675156.013 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-10-04T17:45:56.013Z,1538675156.013 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:45:56.013Z,1538675156.013 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-10-04T17:45:56.394Z,1538675156.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:45:56.394Z,1538675156.394 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:45:56.395Z,1538675156.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:45:56.395Z,1538675156.395 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:45:56.395Z,1538675156.395 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:45:56.396Z,1538675156.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:48:31.609Z,1538675311.609 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-04T17:48:31.609Z,1538675311.609 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,     ,        +0.00,        +0.00,   0.00,5751.52
2018-10-04T17:48:46.743Z,1538675326.743 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T17:48:46.743Z,1538675326.743 [NAL9602] Data Fault, FailCount= 4
2018-10-04T17:48:46.743Z,1538675326.743 [NAL9602](ERROR): Data Fault
2018-10-04T17:48:46.837Z,1538675326.837 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T17:43:44.7Z
2018-10-04T17:48:46.837Z,1538675326.837 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T17:48:46.837Z,1538675326.837 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T17:48:46.848Z,1538675326.848 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T17:48:46.903Z,1538675326.903 [NAL9602](INFO): Powering down
2018-10-04T17:48:47.723Z,1538675327.723 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T17:48:47.723Z,1538675327.723 [NAL9602] No Fault, FailCount= 4
2018-10-04T17:48:51.774Z,1538675331.774 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0238.lzma
2018-10-04T17:48:52.540Z,1538675332.540 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0238.lzma.bak
2018-10-04T17:48:52.556Z,1538675332.556 [DataOverHttps](INFO): SBD MOMSN=8611035
2018-10-04T17:48:56.940Z,1538675336.940 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:48:56.941Z,1538675336.941 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-10-04T17:48:56.941Z,1538675336.941 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:48:56.942Z,1538675336.942 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:48:56.943Z,1538675336.943 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-10-04T17:48:56.943Z,1538675336.943 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:48:56.956Z,1538675336.956 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:48:56.956Z,1538675336.956 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:48:57.119Z,1538675337.119 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:48:57.120Z,1538675337.120 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-10-04T17:48:57.120Z,1538675337.120 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:48:57.120Z,1538675337.120 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-10-04T17:48:57.438Z,1538675337.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:48:57.439Z,1538675337.439 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:48:57.439Z,1538675337.439 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:48:57.440Z,1538675337.440 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:48:57.440Z,1538675337.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:48:57.440Z,1538675337.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:49:01.886Z,1538675341.886 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0239.lzma
2018-10-04T17:49:02.668Z,1538675342.668 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0239.lzma.bak
2018-10-04T17:49:02.669Z,1538675342.669 [DataOverHttps](INFO): SBD MOMSN=8611037
2018-10-04T17:49:03.619Z,1538675343.619 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T17:49:03.619Z,1538675343.619 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T17:49:03.619Z,1538675343.619 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T17:49:16.963Z,1538675356.963 [NAL9602](INFO): Powering up NAL9602
2018-10-04T17:49:22.588Z,1538675362.588 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T17:49:28.161Z,1538675368.161 [NAL9602](INFO): NAL9602 initialized
2018-10-04T17:51:57.600Z,1538675517.600 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:51:57.600Z,1538675517.600 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-10-04T17:51:57.600Z,1538675517.600 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:51:57.602Z,1538675517.602 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:51:57.602Z,1538675517.602 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-10-04T17:51:57.602Z,1538675517.602 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:51:57.636Z,1538675517.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:51:57.636Z,1538675517.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:51:57.986Z,1538675517.986 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:51:57.986Z,1538675517.986 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-10-04T17:51:57.987Z,1538675517.987 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:51:57.987Z,1538675517.987 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-10-04T17:51:58.374Z,1538675518.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:51:58.375Z,1538675518.375 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:51:58.375Z,1538675518.375 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:51:58.375Z,1538675518.375 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:51:58.376Z,1538675518.376 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:51:58.376Z,1538675518.376 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:54:04.009Z,1538675644.009 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T17:54:04.009Z,1538675644.009 [Default:CheckIn:C.Wait] Stopped
2018-10-04T17:54:04.009Z,1538675644.009 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T17:54:04.009Z,1538675644.009 [Default:CheckIn:D] Running Loop=1
2018-10-04T17:54:04.417Z,1538675644.417 [Default:CheckIn:D] Stopped
2018-10-04T17:54:04.417Z,1538675644.417 [Default:CheckIn:E] Running Loop=1
2018-10-04T17:54:04.793Z,1538675644.793 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 817.610742 min 
2018-10-04T17:54:04.793Z,1538675644.793 [Default:CheckIn:E] Stopped
2018-10-04T17:54:04.794Z,1538675644.794 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T17:54:04.794Z,1538675644.794 [Default:CheckIn] Stopped
2018-10-04T17:54:04.794Z,1538675644.794 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T17:54:04.794Z,1538675644.794 [Default:CheckIn](INFO): Running loop #80
2018-10-04T17:54:04.794Z,1538675644.794 [Default:CheckIn] Running Loop=80
2018-10-04T17:54:04.794Z,1538675644.794 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T17:54:04.794Z,1538675644.794 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T17:55:00.117Z,1538675700.117 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:55:00.117Z,1538675700.117 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-10-04T17:55:00.118Z,1538675700.118 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:55:00.119Z,1538675700.119 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:55:00.120Z,1538675700.120 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-10-04T17:55:00.120Z,1538675700.120 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:55:00.146Z,1538675700.146 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:55:00.147Z,1538675700.147 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:55:00.308Z,1538675700.308 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:55:00.308Z,1538675700.308 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-10-04T17:55:00.308Z,1538675700.308 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:55:00.309Z,1538675700.309 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-10-04T17:55:00.630Z,1538675700.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:55:00.630Z,1538675700.630 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:55:00.631Z,1538675700.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:55:00.631Z,1538675700.631 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:55:00.631Z,1538675700.631 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:55:00.632Z,1538675700.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:56:46.944Z,1538675806.944 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.853,*0.004,*65.535
2018-10-04T17:58:00.683Z,1538675880.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:58:00.683Z,1538675880.683 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-10-04T17:58:00.683Z,1538675880.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T17:58:00.689Z,1538675880.689 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T17:58:00.689Z,1538675880.689 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-10-04T17:58:00.690Z,1538675880.690 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T17:58:00.713Z,1538675880.713 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T17:58:00.714Z,1538675880.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T17:58:01.091Z,1538675881.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T17:58:01.091Z,1538675881.091 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-10-04T17:58:01.092Z,1538675881.092 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T17:58:01.092Z,1538675881.092 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-10-04T17:58:01.502Z,1538675881.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T17:58:01.502Z,1538675881.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:58:01.502Z,1538675881.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:58:01.503Z,1538675881.503 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T17:58:01.503Z,1538675881.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T17:58:01.504Z,1538675881.504 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T17:59:07.193Z,1538675947.193 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T17:54:04.8Z
2018-10-04T17:59:07.193Z,1538675947.193 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T17:59:07.193Z,1538675947.193 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T17:59:07.903Z,1538675947.903 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0241.lzma
2018-10-04T17:59:08.844Z,1538675948.844 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0241.lzma.bak
2018-10-04T17:59:08.845Z,1538675948.845 [DataOverHttps](INFO): SBD MOMSN=8611041
2018-10-04T17:59:17.988Z,1538675957.988 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20181004T041305/Express0242.lzma
2018-10-04T17:59:18.760Z,1538675958.760 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0242.lzma.bak
2018-10-04T17:59:18.761Z,1538675958.761 [DataOverHttps](INFO): SBD MOMSN=8611043
2018-10-04T17:59:19.707Z,1538675959.707 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T17:59:19.707Z,1538675959.707 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T17:59:19.707Z,1538675959.707 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T17:59:30.231Z,1538675970.231 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T17:59:30.231Z,1538675970.231 [NAL9602] Data Fault, FailCount= 5
2018-10-04T17:59:30.231Z,1538675970.231 [NAL9602](ERROR): Data Fault
2018-10-04T17:59:30.324Z,1538675970.324 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T17:59:30.325Z,1538675970.325 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T17:59:30.631Z,1538675970.631 [NAL9602](INFO): Powering down
2018-10-04T17:59:30.684Z,1538675970.684 [CBIT](INFO): Critical error at 20181004T175930
2018-10-04T18:01:01.671Z,1538676061.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:01:01.671Z,1538676061.671 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-10-04T18:01:01.671Z,1538676061.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:01:01.693Z,1538676061.693 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:01:01.693Z,1538676061.693 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-10-04T18:01:01.693Z,1538676061.693 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:01:01.723Z,1538676061.723 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:01:01.723Z,1538676061.723 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:01:02.107Z,1538676062.107 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:01:02.107Z,1538676062.107 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-10-04T18:01:02.107Z,1538676062.107 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:01:02.107Z,1538676062.107 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-10-04T18:01:02.493Z,1538676062.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:01:02.494Z,1538676062.494 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:01:02.494Z,1538676062.494 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:01:02.495Z,1538676062.495 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:01:02.495Z,1538676062.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:01:02.495Z,1538676062.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:01:30.256Z,1538676090.256 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T18:01:30.256Z,1538676090.256 [NAL9602] No Fault, FailCount= 5
2018-10-04T18:01:30.579Z,1538676090.579 [NAL9602](INFO): Powering up NAL9602
2018-10-04T18:01:44.548Z,1538676104.548 [NAL9602](INFO): NAL9602 initialized
2018-10-04T18:04:02.567Z,1538676242.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:04:02.567Z,1538676242.567 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-10-04T18:04:02.567Z,1538676242.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:04:02.571Z,1538676242.571 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:04:02.572Z,1538676242.572 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-10-04T18:04:02.572Z,1538676242.572 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:04:02.598Z,1538676242.598 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:04:02.598Z,1538676242.598 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:04:05.788Z,1538676245.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:04:05.788Z,1538676245.788 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-10-04T18:04:05.789Z,1538676245.789 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:04:05.789Z,1538676245.789 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-10-04T18:04:05.898Z,1538676245.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:04:05.898Z,1538676245.898 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:04:05.899Z,1538676245.899 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:04:05.899Z,1538676245.899 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:04:05.900Z,1538676245.900 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:04:05.900Z,1538676245.900 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:04:19.866Z,1538676259.866 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T18:04:19.866Z,1538676259.866 [Default:CheckIn:C.Wait] Stopped
2018-10-04T18:04:19.867Z,1538676259.867 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T18:04:19.867Z,1538676259.867 [Default:CheckIn:D] Running Loop=1
2018-10-04T18:04:20.273Z,1538676260.273 [Default:CheckIn:D] Stopped
2018-10-04T18:04:20.273Z,1538676260.273 [Default:CheckIn:E] Running Loop=1
2018-10-04T18:04:20.643Z,1538676260.643 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 827.875065 min 
2018-10-04T18:04:20.643Z,1538676260.643 [Default:CheckIn:E] Stopped
2018-10-04T18:04:20.643Z,1538676260.643 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T18:04:20.643Z,1538676260.643 [Default:CheckIn] Stopped
2018-10-04T18:04:20.643Z,1538676260.643 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T18:04:20.644Z,1538676260.644 [Default:CheckIn](INFO): Running loop #81
2018-10-04T18:04:20.644Z,1538676260.644 [Default:CheckIn] Running Loop=81
2018-10-04T18:04:20.644Z,1538676260.644 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T18:04:20.644Z,1538676260.644 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T18:06:29.504Z,1538676389.504 [RDI_Pathfinder](ERROR): Failed to parse:
:BE,-32768,-32768,-32768,V
2018-10-04T18:07:06.016Z,1538676426.016 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:07:06.016Z,1538676426.016 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-10-04T18:07:06.016Z,1538676426.016 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:07:06.026Z,1538676426.026 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:07:06.026Z,1538676426.026 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-10-04T18:07:06.027Z,1538676426.027 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:07:06.062Z,1538676426.062 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:07:06.062Z,1538676426.062 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:07:06.411Z,1538676426.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:07:06.411Z,1538676426.411 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-10-04T18:07:06.412Z,1538676426.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:07:06.412Z,1538676426.412 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-10-04T18:07:06.814Z,1538676426.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:07:06.814Z,1538676426.814 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:07:06.815Z,1538676426.815 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:07:06.815Z,1538676426.815 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:07:06.816Z,1538676426.816 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:07:06.816Z,1538676426.816 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:09:23.493Z,1538676563.493 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T18:04:20.6Z
2018-10-04T18:09:23.493Z,1538676563.493 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T18:09:23.493Z,1538676563.493 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T18:09:28.448Z,1538676568.448 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0244.lzma
2018-10-04T18:09:29.228Z,1538676569.228 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0244.lzma.bak
2018-10-04T18:09:29.228Z,1538676569.228 [DataOverHttps](INFO): SBD MOMSN=8611046
2018-10-04T18:09:41.026Z,1538676581.026 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0245.lzma
2018-10-04T18:09:41.622Z,1538676581.622 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0245.lzma.bak
2018-10-04T18:09:41.622Z,1538676581.622 [DataOverHttps](INFO): SBD MOMSN=8611049
2018-10-04T18:09:42.553Z,1538676582.553 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T18:09:42.553Z,1538676582.553 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T18:09:42.553Z,1538676582.553 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T18:10:07.151Z,1538676607.151 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:10:07.151Z,1538676607.151 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-10-04T18:10:07.151Z,1538676607.151 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:10:07.154Z,1538676607.154 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:10:07.154Z,1538676607.154 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-10-04T18:10:07.154Z,1538676607.154 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:10:07.179Z,1538676607.179 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:10:07.179Z,1538676607.179 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:10:07.588Z,1538676607.588 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:10:07.588Z,1538676607.588 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-10-04T18:10:07.593Z,1538676607.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:10:07.593Z,1538676607.593 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-10-04T18:10:07.938Z,1538676607.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:10:07.939Z,1538676607.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:10:07.939Z,1538676607.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:10:07.940Z,1538676607.940 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:10:07.940Z,1538676607.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:10:07.940Z,1538676607.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:11:24.593Z,1538676684.593 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T18:11:45.951Z,1538676705.951 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T18:11:45.951Z,1538676705.951 [NAL9602] Data Fault, FailCount= 1
2018-10-04T18:11:45.951Z,1538676705.951 [NAL9602](ERROR): Data Fault
2018-10-04T18:11:46.015Z,1538676706.015 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T18:11:46.355Z,1538676706.355 [NAL9602](INFO): Powering down
2018-10-04T18:11:47.218Z,1538676707.218 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T18:11:47.218Z,1538676707.218 [NAL9602] No Fault, FailCount= 1
2018-10-04T18:12:16.555Z,1538676736.555 [NAL9602](INFO): Powering up NAL9602
2018-10-04T18:12:27.355Z,1538676747.355 [NAL9602](INFO): NAL9602 initialized
2018-10-04T18:13:08.281Z,1538676788.281 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:13:08.281Z,1538676788.281 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-10-04T18:13:08.281Z,1538676788.281 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:13:08.283Z,1538676788.283 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:13:08.283Z,1538676788.283 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-10-04T18:13:08.283Z,1538676788.283 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:13:08.301Z,1538676788.301 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:13:08.305Z,1538676788.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:13:08.695Z,1538676788.695 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:13:08.695Z,1538676788.695 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-10-04T18:13:08.695Z,1538676788.695 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:13:08.695Z,1538676788.695 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-10-04T18:13:09.065Z,1538676789.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:13:09.066Z,1538676789.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:13:09.066Z,1538676789.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:13:09.067Z,1538676789.067 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:13:09.067Z,1538676789.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:13:09.067Z,1538676789.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:14:42.932Z,1538676882.932 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T18:14:42.933Z,1538676882.933 [Default:CheckIn:C.Wait] Stopped
2018-10-04T18:14:42.933Z,1538676882.933 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T18:14:42.933Z,1538676882.933 [Default:CheckIn:D] Running Loop=1
2018-10-04T18:14:43.330Z,1538676883.330 [Default:CheckIn:D] Stopped
2018-10-04T18:14:43.330Z,1538676883.330 [Default:CheckIn:E] Running Loop=1
2018-10-04T18:14:43.724Z,1538676883.724 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 838.259375 min 
2018-10-04T18:14:43.725Z,1538676883.725 [Default:CheckIn:E] Stopped
2018-10-04T18:14:43.725Z,1538676883.725 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T18:14:43.725Z,1538676883.725 [Default:CheckIn] Stopped
2018-10-04T18:14:43.725Z,1538676883.725 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T18:14:43.726Z,1538676883.726 [Default:CheckIn](INFO): Running loop #82
2018-10-04T18:14:43.726Z,1538676883.726 [Default:CheckIn] Running Loop=82
2018-10-04T18:14:43.726Z,1538676883.726 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T18:14:43.726Z,1538676883.726 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T18:16:09.173Z,1538676969.173 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:16:09.173Z,1538676969.173 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-10-04T18:16:09.173Z,1538676969.173 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:16:09.178Z,1538676969.178 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:16:09.178Z,1538676969.178 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-10-04T18:16:09.178Z,1538676969.178 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:16:09.212Z,1538676969.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:16:09.212Z,1538676969.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:16:09.610Z,1538676969.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:16:09.610Z,1538676969.610 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-10-04T18:16:09.611Z,1538676969.611 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:16:09.611Z,1538676969.611 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-10-04T18:16:09.969Z,1538676969.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:16:09.969Z,1538676969.969 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:16:09.970Z,1538676969.970 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:16:09.970Z,1538676969.970 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:16:09.971Z,1538676969.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:16:09.971Z,1538676969.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:19:10.298Z,1538677150.298 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:19:10.299Z,1538677150.299 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-10-04T18:19:10.299Z,1538677150.299 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:19:10.300Z,1538677150.300 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:19:10.301Z,1538677150.301 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-10-04T18:19:10.301Z,1538677150.301 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:19:10.330Z,1538677150.330 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:19:10.330Z,1538677150.330 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:19:10.433Z,1538677150.433 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:19:10.437Z,1538677150.437 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-10-04T18:19:10.437Z,1538677150.437 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:19:10.437Z,1538677150.437 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-10-04T18:19:10.798Z,1538677150.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:19:10.798Z,1538677150.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:19:10.799Z,1538677150.799 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:19:10.799Z,1538677150.799 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:19:10.800Z,1538677150.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:19:10.800Z,1538677150.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:19:45.604Z,1538677185.604 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T18:14:43.7Z
2018-10-04T18:19:45.604Z,1538677185.604 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T18:19:45.604Z,1538677185.604 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T18:19:50.568Z,1538677190.568 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0247.lzma
2018-10-04T18:19:51.349Z,1538677191.349 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0247.lzma.bak
2018-10-04T18:19:51.349Z,1538677191.349 [DataOverHttps](INFO): SBD MOMSN=8611053
2018-10-04T18:20:03.201Z,1538677203.201 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0248.lzma
2018-10-04T18:20:04.618Z,1538677204.618 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0248.lzma.bak
2018-10-04T18:20:04.618Z,1538677204.618 [DataOverHttps](INFO): SBD MOMSN=8611055
2018-10-04T18:20:05.309Z,1538677205.309 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T18:20:05.310Z,1538677205.310 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T18:20:05.310Z,1538677205.310 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T18:22:10.951Z,1538677330.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:22:10.951Z,1538677330.951 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-10-04T18:22:10.951Z,1538677330.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:22:10.953Z,1538677330.953 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:22:10.953Z,1538677330.953 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-10-04T18:22:10.953Z,1538677330.953 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:22:10.979Z,1538677330.979 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:22:10.979Z,1538677330.979 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:22:11.382Z,1538677331.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:22:11.382Z,1538677331.382 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-10-04T18:22:11.383Z,1538677331.383 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:22:11.383Z,1538677331.383 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-10-04T18:22:11.731Z,1538677331.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:22:11.731Z,1538677331.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:22:11.732Z,1538677331.732 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:22:11.732Z,1538677331.732 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:22:11.733Z,1538677331.733 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:22:11.733Z,1538677331.733 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:22:30.134Z,1538677350.134 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T18:22:30.134Z,1538677350.134 [NAL9602] Data Fault, FailCount= 2
2018-10-04T18:22:30.134Z,1538677350.134 [NAL9602](ERROR): Data Fault
2018-10-04T18:22:30.224Z,1538677350.224 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T18:22:30.287Z,1538677350.287 [NAL9602](INFO): Powering down
2018-10-04T18:22:31.160Z,1538677351.160 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T18:22:31.160Z,1538677351.160 [NAL9602] No Fault, FailCount= 2
2018-10-04T18:23:00.659Z,1538677380.659 [NAL9602](INFO): Powering up NAL9602
2018-10-04T18:23:11.555Z,1538677391.555 [NAL9602](INFO): NAL9602 initialized
2018-10-04T18:25:05.488Z,1538677505.488 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T18:25:05.488Z,1538677505.488 [Default:CheckIn:C.Wait] Stopped
2018-10-04T18:25:05.489Z,1538677505.489 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T18:25:05.489Z,1538677505.489 [Default:CheckIn:D] Running Loop=1
2018-10-04T18:25:05.884Z,1538677505.884 [Default:CheckIn:D] Stopped
2018-10-04T18:25:05.884Z,1538677505.884 [Default:CheckIn:E] Running Loop=1
2018-10-04T18:25:06.272Z,1538677506.272 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 848.635286 min 
2018-10-04T18:25:06.272Z,1538677506.272 [Default:CheckIn:E] Stopped
2018-10-04T18:25:06.272Z,1538677506.272 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T18:25:06.272Z,1538677506.272 [Default:CheckIn] Stopped
2018-10-04T18:25:06.272Z,1538677506.272 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T18:25:06.273Z,1538677506.273 [Default:CheckIn](INFO): Running loop #83
2018-10-04T18:25:06.281Z,1538677506.281 [Default:CheckIn] Running Loop=83
2018-10-04T18:25:06.281Z,1538677506.281 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T18:25:06.281Z,1538677506.281 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T18:25:11.871Z,1538677511.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:25:11.871Z,1538677511.871 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-10-04T18:25:11.871Z,1538677511.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:25:11.873Z,1538677511.873 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:25:11.874Z,1538677511.874 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-10-04T18:25:11.874Z,1538677511.874 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:25:11.899Z,1538677511.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:25:11.899Z,1538677511.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:25:12.324Z,1538677512.324 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:25:12.324Z,1538677512.324 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-10-04T18:25:12.324Z,1538677512.324 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:25:12.325Z,1538677512.325 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-10-04T18:25:12.683Z,1538677512.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:25:12.684Z,1538677512.684 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:25:12.684Z,1538677512.684 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:25:12.684Z,1538677512.684 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:25:12.685Z,1538677512.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:25:12.685Z,1538677512.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:26:38.368Z,1538677598.368 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8b,0ffd,*15.867,*-0.001,*0.000
2018-10-04T18:28:12.951Z,1538677692.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:28:12.951Z,1538677692.951 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-10-04T18:28:12.951Z,1538677692.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:28:12.953Z,1538677692.953 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:28:12.953Z,1538677692.953 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-10-04T18:28:12.953Z,1538677692.953 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:28:12.979Z,1538677692.979 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:28:12.979Z,1538677692.979 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:28:13.397Z,1538677693.397 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:28:13.397Z,1538677693.397 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-10-04T18:28:13.398Z,1538677693.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:28:13.398Z,1538677693.398 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-10-04T18:28:13.748Z,1538677693.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:28:13.748Z,1538677693.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:28:13.749Z,1538677693.749 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:28:13.750Z,1538677693.750 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:28:13.750Z,1538677693.750 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:28:13.751Z,1538677693.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:30:08.856Z,1538677808.856 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T18:25:06.3Z
2018-10-04T18:30:08.856Z,1538677808.856 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T18:30:08.856Z,1538677808.856 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T18:30:13.819Z,1538677813.819 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0250.lzma
2018-10-04T18:30:14.592Z,1538677814.592 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0250.lzma.bak
2018-10-04T18:30:14.593Z,1538677814.593 [DataOverHttps](INFO): SBD MOMSN=8611059
2018-10-04T18:30:24.645Z,1538677824.645 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0251.lzma
2018-10-04T18:30:25.408Z,1538677825.408 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0251.lzma.bak
2018-10-04T18:30:25.409Z,1538677825.409 [DataOverHttps](INFO): SBD MOMSN=8611061
2018-10-04T18:30:26.331Z,1538677826.331 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T18:30:26.331Z,1538677826.331 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T18:30:26.331Z,1538677826.331 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T18:31:13.827Z,1538677873.827 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:31:13.827Z,1538677873.827 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-10-04T18:31:13.827Z,1538677873.827 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:31:13.833Z,1538677873.833 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:31:13.837Z,1538677873.837 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-10-04T18:31:13.837Z,1538677873.837 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:31:13.855Z,1538677873.855 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:31:13.855Z,1538677873.855 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:31:14.281Z,1538677874.281 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:31:14.281Z,1538677874.281 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-10-04T18:31:14.282Z,1538677874.282 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:31:14.282Z,1538677874.282 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-10-04T18:31:14.616Z,1538677874.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:31:14.617Z,1538677874.617 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:31:14.617Z,1538677874.617 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:31:14.617Z,1538677874.617 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:31:14.618Z,1538677874.618 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:31:14.618Z,1538677874.618 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:33:12.515Z,1538677992.515 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T18:33:12.515Z,1538677992.515 [NAL9602] Data Fault, FailCount= 3
2018-10-04T18:33:12.515Z,1538677992.515 [NAL9602](ERROR): Data Fault
2018-10-04T18:33:12.574Z,1538677992.574 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T18:33:12.919Z,1538677992.919 [NAL9602](INFO): Powering down
2018-10-04T18:33:13.764Z,1538677993.764 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T18:33:13.765Z,1538677993.765 [NAL9602] No Fault, FailCount= 3
2018-10-04T18:33:43.003Z,1538678023.003 [NAL9602](INFO): Powering up NAL9602
2018-10-04T18:33:53.803Z,1538678033.803 [NAL9602](INFO): NAL9602 initialized
2018-10-04T18:34:14.732Z,1538678054.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:34:14.732Z,1538678054.732 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-10-04T18:34:14.732Z,1538678054.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:34:14.734Z,1538678054.734 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:34:14.734Z,1538678054.734 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-10-04T18:34:14.734Z,1538678054.734 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:34:14.760Z,1538678054.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:34:14.761Z,1538678054.761 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:34:15.128Z,1538678055.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:34:15.128Z,1538678055.128 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-10-04T18:34:15.133Z,1538678055.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:34:15.133Z,1538678055.133 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-10-04T18:34:15.530Z,1538678055.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:34:15.531Z,1538678055.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:34:15.531Z,1538678055.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:34:15.531Z,1538678055.531 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:34:15.532Z,1538678055.532 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:34:15.532Z,1538678055.532 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:35:26.538Z,1538678126.538 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T18:35:26.539Z,1538678126.539 [Default:CheckIn:C.Wait] Stopped
2018-10-04T18:35:26.539Z,1538678126.539 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T18:35:26.539Z,1538678126.539 [Default:CheckIn:D] Running Loop=1
2018-10-04T18:35:26.901Z,1538678126.901 [Default:CheckIn:D] Stopped
2018-10-04T18:35:26.901Z,1538678126.901 [Default:CheckIn:E] Running Loop=1
2018-10-04T18:35:27.313Z,1538678127.313 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 858.985547 min 
2018-10-04T18:35:27.313Z,1538678127.313 [Default:CheckIn:E] Stopped
2018-10-04T18:35:27.313Z,1538678127.313 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T18:35:27.313Z,1538678127.313 [Default:CheckIn] Stopped
2018-10-04T18:35:27.313Z,1538678127.313 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T18:35:27.314Z,1538678127.314 [Default:CheckIn](INFO): Running loop #84
2018-10-04T18:35:27.314Z,1538678127.314 [Default:CheckIn] Running Loop=84
2018-10-04T18:35:27.314Z,1538678127.314 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T18:35:27.314Z,1538678127.314 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T18:37:15.732Z,1538678235.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:37:15.732Z,1538678235.732 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-10-04T18:37:15.732Z,1538678235.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:37:15.738Z,1538678235.738 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:37:15.739Z,1538678235.739 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-10-04T18:37:15.739Z,1538678235.739 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:37:15.760Z,1538678235.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:37:15.760Z,1538678235.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:37:16.147Z,1538678236.147 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:37:16.147Z,1538678236.147 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-10-04T18:37:16.148Z,1538678236.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:37:16.148Z,1538678236.148 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-10-04T18:37:16.542Z,1538678236.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:37:16.542Z,1538678236.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:37:16.543Z,1538678236.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:37:16.543Z,1538678236.543 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:37:16.543Z,1538678236.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:37:16.544Z,1538678236.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:38:31.491Z,1538678311.491 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T18:40:16.550Z,1538678416.550 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:40:16.550Z,1538678416.550 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2018-10-04T18:40:16.550Z,1538678416.550 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:40:16.552Z,1538678416.552 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:40:16.552Z,1538678416.552 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2018-10-04T18:40:16.552Z,1538678416.552 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:40:16.582Z,1538678416.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:40:16.582Z,1538678416.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:40:16.966Z,1538678416.966 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:40:16.966Z,1538678416.966 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2018-10-04T18:40:16.967Z,1538678416.967 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:40:16.967Z,1538678416.967 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2018-10-04T18:40:17.350Z,1538678417.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:40:17.350Z,1538678417.350 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:40:17.351Z,1538678417.351 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:40:17.351Z,1538678417.351 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:40:17.351Z,1538678417.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:40:17.352Z,1538678417.352 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:40:29.358Z,1538678429.358 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T18:35:27.3Z
2018-10-04T18:40:29.358Z,1538678429.358 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T18:40:29.359Z,1538678429.359 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T18:40:34.320Z,1538678434.320 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0253.lzma
2018-10-04T18:40:35.101Z,1538678435.101 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0253.lzma.bak
2018-10-04T18:40:35.101Z,1538678435.101 [DataOverHttps](INFO): SBD MOMSN=8611065
2018-10-04T18:40:44.285Z,1538678444.285 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0254.lzma
2018-10-04T18:40:45.044Z,1538678445.044 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0254.lzma.bak
2018-10-04T18:40:45.045Z,1538678445.045 [DataOverHttps](INFO): SBD MOMSN=8611067
2018-10-04T18:40:45.985Z,1538678445.985 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T18:40:45.985Z,1538678445.985 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T18:40:45.985Z,1538678445.985 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T18:42:14.366Z,1538678534.366 [RDI_Pathfinder](ERROR): Failed to parse:
:e8c,0ffd, 15.894, -0.000, 0.000
2018-10-04T18:43:17.745Z,1538678597.745 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:43:17.745Z,1538678597.745 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2018-10-04T18:43:17.745Z,1538678597.745 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:43:17.747Z,1538678597.747 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:43:17.747Z,1538678597.747 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2018-10-04T18:43:17.747Z,1538678597.747 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:43:17.777Z,1538678597.777 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:43:17.777Z,1538678597.777 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:43:18.189Z,1538678598.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:43:18.189Z,1538678598.189 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2018-10-04T18:43:18.190Z,1538678598.190 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:43:18.190Z,1538678598.190 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2018-10-04T18:43:18.562Z,1538678598.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:43:18.563Z,1538678598.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:43:18.563Z,1538678598.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:43:18.563Z,1538678598.563 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:43:18.564Z,1538678598.564 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:43:18.564Z,1538678598.564 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:43:56.216Z,1538678636.216 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T18:43:56.216Z,1538678636.216 [NAL9602] Data Fault, FailCount= 4
2018-10-04T18:43:56.216Z,1538678636.216 [NAL9602](ERROR): Data Fault
2018-10-04T18:43:56.295Z,1538678636.295 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T18:43:56.611Z,1538678636.611 [NAL9602](INFO): Powering down
2018-10-04T18:43:57.502Z,1538678637.502 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T18:43:57.502Z,1538678637.502 [NAL9602] No Fault, FailCount= 4
2018-10-04T18:44:26.655Z,1538678666.655 [NAL9602](INFO): Powering up NAL9602
2018-10-04T18:44:37.855Z,1538678677.855 [NAL9602](INFO): NAL9602 initialized
2018-10-04T18:45:46.457Z,1538678746.457 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T18:45:46.458Z,1538678746.458 [Default:CheckIn:C.Wait] Stopped
2018-10-04T18:45:46.458Z,1538678746.458 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T18:45:46.458Z,1538678746.458 [Default:CheckIn:D] Running Loop=1
2018-10-04T18:45:46.869Z,1538678746.869 [Default:CheckIn:D] Stopped
2018-10-04T18:45:46.869Z,1538678746.869 [Default:CheckIn:E] Running Loop=1
2018-10-04T18:45:47.256Z,1538678747.256 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 869.318294 min 
2018-10-04T18:45:47.257Z,1538678747.257 [Default:CheckIn:E] Stopped
2018-10-04T18:45:47.257Z,1538678747.257 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T18:45:47.257Z,1538678747.257 [Default:CheckIn] Stopped
2018-10-04T18:45:47.257Z,1538678747.257 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T18:45:47.257Z,1538678747.257 [Default:CheckIn](INFO): Running loop #85
2018-10-04T18:45:47.257Z,1538678747.257 [Default:CheckIn] Running Loop=85
2018-10-04T18:45:47.258Z,1538678747.258 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T18:45:47.258Z,1538678747.258 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T18:46:18.927Z,1538678778.927 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:46:18.927Z,1538678778.927 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2018-10-04T18:46:18.927Z,1538678778.927 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:46:18.944Z,1538678778.944 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:46:18.944Z,1538678778.944 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2018-10-04T18:46:18.944Z,1538678778.944 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:46:18.990Z,1538678778.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:46:18.991Z,1538678778.991 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:46:19.420Z,1538678779.420 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:46:19.420Z,1538678779.420 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2018-10-04T18:46:19.421Z,1538678779.421 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:46:19.429Z,1538678779.429 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2018-10-04T18:46:19.726Z,1538678779.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:46:19.727Z,1538678779.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:46:19.727Z,1538678779.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:46:19.728Z,1538678779.728 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:46:19.728Z,1538678779.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:46:19.728Z,1538678779.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:47:18.392Z,1538678838.392 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T18:48:29.424Z,1538678909.424 [RDI_Pathfinder](ERROR): Failed to parse:
:SA,   +0.00,   +0.00,  0.00
2018-10-04T18:49:19.936Z,1538678959.936 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:49:19.936Z,1538678959.936 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2018-10-04T18:49:19.936Z,1538678959.936 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:49:19.938Z,1538678959.938 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:49:19.938Z,1538678959.938 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2018-10-04T18:49:19.938Z,1538678959.938 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:49:19.964Z,1538678959.964 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:49:19.969Z,1538678959.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:49:20.377Z,1538678960.377 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:49:20.377Z,1538678960.377 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2018-10-04T18:49:20.378Z,1538678960.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:49:20.378Z,1538678960.378 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2018-10-04T18:49:20.748Z,1538678960.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:49:20.749Z,1538678960.749 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:49:20.749Z,1538678960.749 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:49:20.750Z,1538678960.750 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:49:20.750Z,1538678960.750 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:49:20.750Z,1538678960.750 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:50:20.513Z,1538679020.513 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-04T18:50:20.513Z,1538679020.513 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0    +0.00,   0.00,9458.09
2018-10-04T18:50:22.508Z,1538679022.508 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T18:50:22.508Z,1538679022.508 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100411551, -0.1,   0.0,1448.9,  0
2018-10-04T18:50:49.336Z,1538679049.336 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T18:45:47.3Z
2018-10-04T18:50:49.336Z,1538679049.336 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T18:50:49.336Z,1538679049.336 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T18:50:54.328Z,1538679054.328 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0256.lzma
2018-10-04T18:50:55.109Z,1538679055.109 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0256.lzma.bak
2018-10-04T18:50:55.109Z,1538679055.109 [DataOverHttps](INFO): SBD MOMSN=8611071
2018-10-04T18:51:04.853Z,1538679064.853 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0257.lzma
2018-10-04T18:51:05.613Z,1538679065.613 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0257.lzma.bak
2018-10-04T18:51:05.613Z,1538679065.613 [DataOverHttps](INFO): SBD MOMSN=8611073
2018-10-04T18:51:06.598Z,1538679066.598 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T18:51:06.599Z,1538679066.599 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T18:51:06.599Z,1538679066.599 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T18:52:20.843Z,1538679140.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:52:20.843Z,1538679140.843 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2018-10-04T18:52:20.843Z,1538679140.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:52:20.845Z,1538679140.845 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:52:20.845Z,1538679140.845 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2018-10-04T18:52:20.846Z,1538679140.846 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:52:20.899Z,1538679140.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:52:20.899Z,1538679140.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:52:21.034Z,1538679141.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:52:21.034Z,1538679141.034 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2018-10-04T18:52:21.035Z,1538679141.035 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:52:21.035Z,1538679141.035 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2018-10-04T18:52:21.410Z,1538679141.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:52:21.411Z,1538679141.411 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:52:21.411Z,1538679141.411 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:52:21.411Z,1538679141.411 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:52:21.412Z,1538679141.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:52:21.412Z,1538679141.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:54:41.851Z,1538679281.851 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T18:54:41.851Z,1538679281.851 [NAL9602] Data Fault, FailCount= 5
2018-10-04T18:54:41.851Z,1538679281.851 [NAL9602](ERROR): Data Fault
2018-10-04T18:54:41.909Z,1538679281.909 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T18:54:41.910Z,1538679281.910 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T18:54:42.203Z,1538679282.203 [NAL9602](INFO): Powering down
2018-10-04T18:54:42.281Z,1538679282.281 [CBIT](INFO): Critical error at 20181004T185441
2018-10-04T18:55:21.583Z,1538679321.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:55:21.583Z,1538679321.583 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2018-10-04T18:55:21.583Z,1538679321.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:55:21.589Z,1538679321.589 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:55:21.589Z,1538679321.589 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2018-10-04T18:55:21.589Z,1538679321.589 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:55:21.615Z,1538679321.615 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:55:21.615Z,1538679321.615 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:55:22.006Z,1538679322.006 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:55:22.006Z,1538679322.006 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2018-10-04T18:55:22.007Z,1538679322.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:55:22.007Z,1538679322.007 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2018-10-04T18:55:22.384Z,1538679322.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:55:22.384Z,1538679322.384 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:55:22.389Z,1538679322.389 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:55:22.389Z,1538679322.389 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:55:22.390Z,1538679322.390 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:55:22.390Z,1538679322.390 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:56:06.888Z,1538679366.888 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T18:56:06.893Z,1538679366.893 [Default:CheckIn:C.Wait] Stopped
2018-10-04T18:56:06.893Z,1538679366.893 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T18:56:06.893Z,1538679366.893 [Default:CheckIn:D] Running Loop=1
2018-10-04T18:56:07.298Z,1538679367.298 [Default:CheckIn:D] Stopped
2018-10-04T18:56:07.298Z,1538679367.298 [Default:CheckIn:E] Running Loop=1
2018-10-04T18:56:07.704Z,1538679367.704 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 879.658854 min 
2018-10-04T18:56:07.704Z,1538679367.704 [Default:CheckIn:E] Stopped
2018-10-04T18:56:07.704Z,1538679367.704 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T18:56:07.705Z,1538679367.705 [Default:CheckIn] Stopped
2018-10-04T18:56:07.707Z,1538679367.707 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T18:56:07.707Z,1538679367.707 [Default:CheckIn](INFO): Running loop #86
2018-10-04T18:56:07.707Z,1538679367.707 [Default:CheckIn] Running Loop=86
2018-10-04T18:56:07.708Z,1538679367.708 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T18:56:07.708Z,1538679367.708 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T18:56:42.069Z,1538679402.069 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T18:56:42.070Z,1538679402.070 [NAL9602] No Fault, FailCount= 5
2018-10-04T18:56:42.395Z,1538679402.395 [NAL9602](INFO): Powering up NAL9602
2018-10-04T18:56:49.247Z,1538679409.247 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T18:56:53.591Z,1538679413.591 [NAL9602](INFO): NAL9602 initialized
2018-10-04T18:58:22.760Z,1538679502.760 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:58:22.761Z,1538679502.761 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2018-10-04T18:58:22.761Z,1538679502.761 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T18:58:22.763Z,1538679502.763 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T18:58:22.763Z,1538679502.763 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2018-10-04T18:58:22.763Z,1538679502.763 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T18:58:22.776Z,1538679502.776 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T18:58:22.776Z,1538679502.776 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T18:58:23.210Z,1538679503.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T18:58:23.210Z,1538679503.210 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2018-10-04T18:58:23.211Z,1538679503.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T18:58:23.211Z,1538679503.211 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2018-10-04T18:58:23.539Z,1538679503.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T18:58:23.539Z,1538679503.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:58:23.540Z,1538679503.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T18:58:23.540Z,1538679503.540 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T18:58:23.540Z,1538679503.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T18:58:23.541Z,1538679503.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:01:09.921Z,1538679669.921 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T18:56:07.7Z
2018-10-04T19:01:09.921Z,1538679669.921 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T19:01:09.921Z,1538679669.921 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T19:01:14.927Z,1538679674.927 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20181004T041305/Courier0259.lzma
2018-10-04T19:01:15.709Z,1538679675.709 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0259.lzma.bak
2018-10-04T19:01:15.709Z,1538679675.709 [DataOverHttps](INFO): SBD MOMSN=8611077
2018-10-04T19:01:24.885Z,1538679684.885 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:01:24.885Z,1538679684.885 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2018-10-04T19:01:24.885Z,1538679684.885 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:01:24.887Z,1538679684.887 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:01:24.887Z,1538679684.887 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2018-10-04T19:01:24.887Z,1538679684.887 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:01:24.900Z,1538679684.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:01:24.900Z,1538679684.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:01:24.963Z,1538679684.963 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0260.lzma
2018-10-04T19:01:25.054Z,1538679685.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:01:25.054Z,1538679685.054 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2018-10-04T19:01:25.054Z,1538679685.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:01:25.055Z,1538679685.055 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2018-10-04T19:01:25.381Z,1538679685.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:01:25.382Z,1538679685.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:01:25.382Z,1538679685.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:01:25.383Z,1538679685.383 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:01:25.383Z,1538679685.383 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:01:25.383Z,1538679685.383 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:01:25.716Z,1538679685.716 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0260.lzma.bak
2018-10-04T19:01:25.717Z,1538679685.717 [DataOverHttps](INFO): SBD MOMSN=8611080
2018-10-04T19:01:26.673Z,1538679686.673 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T19:01:26.673Z,1538679686.673 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T19:01:26.673Z,1538679686.673 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T19:04:26.833Z,1538679866.833 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:04:26.833Z,1538679866.833 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2018-10-04T19:04:26.833Z,1538679866.833 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:04:26.835Z,1538679866.835 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:04:26.835Z,1538679866.835 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2018-10-04T19:04:26.835Z,1538679866.835 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:04:26.848Z,1538679866.848 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:04:26.848Z,1538679866.848 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:04:26.980Z,1538679866.980 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:04:26.980Z,1538679866.980 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2018-10-04T19:04:26.980Z,1538679866.980 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:04:26.980Z,1538679866.980 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2018-10-04T19:04:27.337Z,1538679867.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:04:27.338Z,1538679867.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:04:27.338Z,1538679867.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:04:27.338Z,1538679867.338 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:04:27.339Z,1538679867.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:04:27.339Z,1538679867.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:04:28.132Z,1538679868.132 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-04T19:04:28.132Z,1538679868.132 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +     +0.00,        +0.00,   0.00,10305.27
2018-10-04T19:05:38.353Z,1538679938.353 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.880,*-0.002,*0.000
2018-10-04T19:06:27.006Z,1538679987.006 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T19:06:27.006Z,1538679987.006 [Default:CheckIn:C.Wait] Stopped
2018-10-04T19:06:27.006Z,1538679987.006 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T19:06:27.006Z,1538679987.006 [Default:CheckIn:D] Running Loop=1
2018-10-04T19:06:27.407Z,1538679987.407 [Default:CheckIn:D] Stopped
2018-10-04T19:06:27.407Z,1538679987.407 [Default:CheckIn:E] Running Loop=1
2018-10-04T19:06:27.804Z,1538679987.804 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 889.993945 min 
2018-10-04T19:06:27.804Z,1538679987.804 [Default:CheckIn:E] Stopped
2018-10-04T19:06:27.804Z,1538679987.804 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T19:06:27.804Z,1538679987.804 [Default:CheckIn] Stopped
2018-10-04T19:06:27.804Z,1538679987.804 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T19:06:27.817Z,1538679987.817 [Default:CheckIn](INFO): Running loop #87
2018-10-04T19:06:27.817Z,1538679987.817 [Default:CheckIn] Running Loop=87
2018-10-04T19:06:27.817Z,1538679987.817 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T19:06:27.817Z,1538679987.817 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T19:06:55.479Z,1538680015.479 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T19:06:55.479Z,1538680015.479 [NAL9602] Data Fault, FailCount= 1
2018-10-04T19:06:55.479Z,1538680015.479 [NAL9602](ERROR): Data Fault
2018-10-04T19:06:55.563Z,1538680015.563 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T19:06:55.879Z,1538680015.879 [NAL9602](INFO): Powering down
2018-10-04T19:06:56.767Z,1538680016.767 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T19:06:56.767Z,1538680016.767 [NAL9602] No Fault, FailCount= 1
2018-10-04T19:07:25.995Z,1538680045.995 [NAL9602](INFO): Powering up NAL9602
2018-10-04T19:07:27.638Z,1538680047.638 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:07:27.638Z,1538680047.638 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2018-10-04T19:07:27.638Z,1538680047.638 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:07:27.640Z,1538680047.640 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:07:27.640Z,1538680047.640 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2018-10-04T19:07:27.640Z,1538680047.640 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:07:27.673Z,1538680047.673 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:07:27.674Z,1538680047.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:07:28.047Z,1538680048.047 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:07:28.047Z,1538680048.047 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2018-10-04T19:07:28.048Z,1538680048.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:07:28.048Z,1538680048.048 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2018-10-04T19:07:28.458Z,1538680048.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:07:28.458Z,1538680048.458 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:07:28.458Z,1538680048.458 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:07:28.459Z,1538680048.459 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:07:28.459Z,1538680048.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:07:28.460Z,1538680048.460 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:07:37.191Z,1538680057.191 [NAL9602](INFO): NAL9602 initialized
2018-10-04T19:10:28.495Z,1538680228.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:10:28.495Z,1538680228.495 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2018-10-04T19:10:28.495Z,1538680228.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:10:28.498Z,1538680228.498 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:10:28.498Z,1538680228.498 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2018-10-04T19:10:28.498Z,1538680228.498 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:10:28.511Z,1538680228.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:10:28.511Z,1538680228.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:10:28.914Z,1538680228.914 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:10:28.914Z,1538680228.914 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2018-10-04T19:10:28.915Z,1538680228.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:10:28.915Z,1538680228.915 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2018-10-04T19:10:29.305Z,1538680229.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:10:29.305Z,1538680229.305 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:10:29.306Z,1538680229.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:10:29.306Z,1538680229.306 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:10:29.306Z,1538680229.306 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:10:29.307Z,1538680229.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:11:32.464Z,1538680292.464 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T19:06:27.8Z
2018-10-04T19:11:32.464Z,1538680292.464 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T19:11:32.465Z,1538680292.465 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T19:11:37.437Z,1538680297.437 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0262.lzma
2018-10-04T19:11:38.577Z,1538680298.577 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0262.lzma.bak
2018-10-04T19:11:38.577Z,1538680298.577 [DataOverHttps](INFO): SBD MOMSN=8611084
2018-10-04T19:11:47.825Z,1538680307.825 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0263.lzma
2018-10-04T19:11:48.608Z,1538680308.608 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0263.lzma.bak
2018-10-04T19:11:48.609Z,1538680308.609 [DataOverHttps](INFO): SBD MOMSN=8611086
2018-10-04T19:11:49.568Z,1538680309.568 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T19:11:49.568Z,1538680309.568 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T19:11:49.568Z,1538680309.568 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T19:13:29.552Z,1538680409.552 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:13:29.552Z,1538680409.552 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2018-10-04T19:13:29.553Z,1538680409.553 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:13:29.554Z,1538680409.554 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:13:29.555Z,1538680409.555 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2018-10-04T19:13:29.555Z,1538680409.555 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:13:29.588Z,1538680409.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:13:29.588Z,1538680409.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:13:29.966Z,1538680409.966 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:13:29.966Z,1538680409.966 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2018-10-04T19:13:29.967Z,1538680409.967 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:13:29.967Z,1538680409.967 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2018-10-04T19:13:30.387Z,1538680410.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:13:30.387Z,1538680410.387 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:13:30.388Z,1538680410.388 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:13:30.388Z,1538680410.388 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:13:30.389Z,1538680410.389 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:13:30.393Z,1538680410.393 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:16:30.499Z,1538680590.499 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:16:30.499Z,1538680590.499 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2018-10-04T19:16:30.499Z,1538680590.499 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:16:30.505Z,1538680590.505 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:16:30.505Z,1538680590.505 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2018-10-04T19:16:30.506Z,1538680590.506 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:16:30.547Z,1538680590.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:16:30.548Z,1538680590.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:16:30.919Z,1538680590.919 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:16:30.919Z,1538680590.919 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2018-10-04T19:16:30.920Z,1538680590.920 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:16:30.920Z,1538680590.920 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2018-10-04T19:16:31.319Z,1538680591.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:16:31.319Z,1538680591.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:16:31.320Z,1538680591.320 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:16:31.320Z,1538680591.320 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:16:31.321Z,1538680591.321 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:16:31.325Z,1538680591.325 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:16:49.778Z,1538680609.778 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T19:16:49.778Z,1538680609.778 [Default:CheckIn:C.Wait] Stopped
2018-10-04T19:16:49.778Z,1538680609.778 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T19:16:49.778Z,1538680609.778 [Default:CheckIn:D] Running Loop=1
2018-10-04T19:16:50.197Z,1538680610.197 [Default:CheckIn:D] Stopped
2018-10-04T19:16:50.197Z,1538680610.197 [Default:CheckIn:E] Running Loop=1
2018-10-04T19:16:50.568Z,1538680610.568 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 900.373828 min 
2018-10-04T19:16:50.568Z,1538680610.568 [Default:CheckIn:E] Stopped
2018-10-04T19:16:50.569Z,1538680610.569 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T19:16:50.577Z,1538680610.577 [Default:CheckIn] Stopped
2018-10-04T19:16:50.582Z,1538680610.582 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T19:16:50.582Z,1538680610.582 [Default:CheckIn](INFO): Running loop #88
2018-10-04T19:16:50.582Z,1538680610.582 [Default:CheckIn] Running Loop=88
2018-10-04T19:16:50.582Z,1538680610.582 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T19:16:50.582Z,1538680610.582 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T19:17:38.183Z,1538680658.183 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T19:17:38.183Z,1538680658.183 [NAL9602] Data Fault, FailCount= 2
2018-10-04T19:17:38.183Z,1538680658.183 [NAL9602](ERROR): Data Fault
2018-10-04T19:17:38.285Z,1538680658.285 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T19:17:38.581Z,1538680658.581 [NAL9602](INFO): Powering down
2018-10-04T19:17:39.463Z,1538680659.463 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T19:17:39.463Z,1538680659.463 [NAL9602] No Fault, FailCount= 2
2018-10-04T19:18:08.631Z,1538680688.631 [NAL9602](INFO): Powering up NAL9602
2018-10-04T19:18:21.918Z,1538680701.918 [NAL9602](INFO): NAL9602 initialized
2018-10-04T19:19:25.654Z,1538680765.654 [RDI_Pathfinder](ERROR): DVL BIT error. See manual. Result code: 768
2018-10-04T19:19:25.655Z,1538680765.655 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-04T19:19:32.076Z,1538680772.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:19:32.076Z,1538680772.076 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2018-10-04T19:19:32.076Z,1538680772.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:19:32.078Z,1538680772.078 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:19:32.078Z,1538680772.078 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2018-10-04T19:19:32.078Z,1538680772.078 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:19:32.112Z,1538680772.112 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:19:32.113Z,1538680772.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:19:32.232Z,1538680772.232 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:19:32.232Z,1538680772.232 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2018-10-04T19:19:32.237Z,1538680772.237 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:19:32.237Z,1538680772.237 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2018-10-04T19:19:32.578Z,1538680772.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:19:32.578Z,1538680772.578 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:19:32.579Z,1538680772.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:19:32.579Z,1538680772.579 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:19:32.579Z,1538680772.579 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:19:32.580Z,1538680772.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:19:33.356Z,1538680773.356 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T19:21:53.368Z,1538680913.368 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T19:16:50.6Z
2018-10-04T19:21:53.368Z,1538680913.368 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T19:21:53.368Z,1538680913.368 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T19:21:58.305Z,1538680918.305 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0265.lzma
2018-10-04T19:21:59.078Z,1538680919.078 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0265.lzma.bak
2018-10-04T19:21:59.078Z,1538680919.078 [DataOverHttps](INFO): SBD MOMSN=8611090
2018-10-04T19:22:08.449Z,1538680928.449 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0266.lzma
2018-10-04T19:22:09.212Z,1538680929.212 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0266.lzma.bak
2018-10-04T19:22:09.212Z,1538680929.212 [DataOverHttps](INFO): SBD MOMSN=8611092
2018-10-04T19:22:10.202Z,1538680930.202 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T19:22:10.202Z,1538680930.202 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T19:22:10.202Z,1538680930.202 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T19:22:32.907Z,1538680952.907 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:22:32.907Z,1538680952.907 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2018-10-04T19:22:32.907Z,1538680952.907 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:22:32.909Z,1538680952.909 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:22:32.909Z,1538680952.909 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2018-10-04T19:22:32.909Z,1538680952.909 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:22:32.946Z,1538680952.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:22:32.946Z,1538680952.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:22:33.348Z,1538680953.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:22:33.348Z,1538680953.348 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2018-10-04T19:22:33.353Z,1538680953.353 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:22:33.353Z,1538680953.353 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2018-10-04T19:22:33.690Z,1538680953.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:22:33.690Z,1538680953.690 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:22:33.691Z,1538680953.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:22:33.691Z,1538680953.691 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:22:33.692Z,1538680953.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:22:33.692Z,1538680953.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:25:33.959Z,1538681133.959 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:25:33.959Z,1538681133.959 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2018-10-04T19:25:33.959Z,1538681133.959 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:25:33.965Z,1538681133.965 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:25:33.965Z,1538681133.965 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2018-10-04T19:25:33.966Z,1538681133.966 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:25:33.987Z,1538681133.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:25:33.987Z,1538681133.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:25:34.376Z,1538681134.376 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:25:34.376Z,1538681134.376 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2018-10-04T19:25:34.376Z,1538681134.376 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:25:34.376Z,1538681134.376 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2018-10-04T19:25:34.754Z,1538681134.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:25:34.755Z,1538681134.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:25:34.755Z,1538681134.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:25:34.756Z,1538681134.756 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:25:34.756Z,1538681134.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:25:34.756Z,1538681134.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:27:10.394Z,1538681230.394 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T19:27:10.394Z,1538681230.394 [Default:CheckIn:C.Wait] Stopped
2018-10-04T19:27:10.394Z,1538681230.394 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T19:27:10.394Z,1538681230.394 [Default:CheckIn:D] Running Loop=1
2018-10-04T19:27:10.787Z,1538681230.787 [Default:CheckIn:D] Stopped
2018-10-04T19:27:10.787Z,1538681230.787 [Default:CheckIn:E] Running Loop=1
2018-10-04T19:27:11.210Z,1538681231.210 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 910.716992 min 
2018-10-04T19:27:11.210Z,1538681231.210 [Default:CheckIn:E] Stopped
2018-10-04T19:27:11.211Z,1538681231.211 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T19:27:11.211Z,1538681231.211 [Default:CheckIn] Stopped
2018-10-04T19:27:11.211Z,1538681231.211 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T19:27:11.211Z,1538681231.211 [Default:CheckIn](INFO): Running loop #89
2018-10-04T19:27:11.211Z,1538681231.211 [Default:CheckIn] Running Loop=89
2018-10-04T19:27:11.211Z,1538681231.211 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T19:27:11.211Z,1538681231.211 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T19:28:23.943Z,1538681303.943 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T19:28:23.943Z,1538681303.943 [NAL9602] Data Fault, FailCount= 3
2018-10-04T19:28:23.943Z,1538681303.943 [NAL9602](ERROR): Data Fault
2018-10-04T19:28:24.016Z,1538681304.016 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T19:28:24.343Z,1538681304.343 [NAL9602](INFO): Powering down
2018-10-04T19:28:25.227Z,1538681305.227 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T19:28:25.227Z,1538681305.227 [NAL9602] No Fault, FailCount= 3
2018-10-04T19:28:34.775Z,1538681314.775 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:28:34.775Z,1538681314.775 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2018-10-04T19:28:34.775Z,1538681314.775 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:28:34.781Z,1538681314.781 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:28:34.781Z,1538681314.781 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2018-10-04T19:28:34.781Z,1538681314.781 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:28:34.811Z,1538681314.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:28:34.811Z,1538681314.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:28:35.209Z,1538681315.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:28:35.234Z,1538681315.234 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2018-10-04T19:28:35.235Z,1538681315.235 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:28:35.235Z,1538681315.235 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2018-10-04T19:28:35.587Z,1538681315.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:28:35.588Z,1538681315.588 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:28:35.588Z,1538681315.588 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:28:35.589Z,1538681315.589 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:28:35.589Z,1538681315.589 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:28:35.590Z,1538681315.590 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:28:54.439Z,1538681334.439 [NAL9602](INFO): Powering up NAL9602
2018-10-04T19:29:05.635Z,1538681345.635 [NAL9602](INFO): NAL9602 initialized
2018-10-04T19:31:39.069Z,1538681499.069 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:31:39.069Z,1538681499.069 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2018-10-04T19:31:39.069Z,1538681499.069 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:31:39.071Z,1538681499.071 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:31:39.071Z,1538681499.071 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2018-10-04T19:31:39.071Z,1538681499.071 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:31:39.105Z,1538681499.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:31:39.106Z,1538681499.106 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:31:39.219Z,1538681499.219 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:31:39.220Z,1538681499.220 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2018-10-04T19:31:39.220Z,1538681499.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:31:39.220Z,1538681499.220 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2018-10-04T19:31:39.590Z,1538681499.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:31:39.590Z,1538681499.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:31:39.591Z,1538681499.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:31:39.591Z,1538681499.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:31:39.591Z,1538681499.591 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:31:39.592Z,1538681499.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:31:40.350Z,1538681500.350 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T19:32:12.799Z,1538681532.799 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T19:27:11.2Z
2018-10-04T19:32:12.800Z,1538681532.800 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T19:32:12.800Z,1538681532.800 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T19:32:17.747Z,1538681537.747 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0268.lzma
2018-10-04T19:32:18.531Z,1538681538.531 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0268.lzma.bak
2018-10-04T19:32:18.532Z,1538681538.532 [DataOverHttps](INFO): SBD MOMSN=8611096
2018-10-04T19:32:28.188Z,1538681548.188 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0269.lzma
2018-10-04T19:32:28.960Z,1538681548.960 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0269.lzma.bak
2018-10-04T19:32:28.960Z,1538681548.960 [DataOverHttps](INFO): SBD MOMSN=8611098
2018-10-04T19:32:29.889Z,1538681549.889 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T19:32:29.889Z,1538681549.889 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T19:32:29.889Z,1538681549.889 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T19:34:39.747Z,1538681679.747 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:34:39.747Z,1538681679.747 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2018-10-04T19:34:39.747Z,1538681679.747 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:34:39.753Z,1538681679.753 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:34:39.753Z,1538681679.753 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2018-10-04T19:34:39.753Z,1538681679.753 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:34:39.783Z,1538681679.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:34:39.783Z,1538681679.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:34:40.160Z,1538681680.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:34:40.160Z,1538681680.160 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2018-10-04T19:34:40.161Z,1538681680.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:34:40.161Z,1538681680.161 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2018-10-04T19:34:40.515Z,1538681680.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:34:40.515Z,1538681680.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:34:40.516Z,1538681680.516 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:34:40.516Z,1538681680.516 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:34:40.516Z,1538681680.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:34:40.517Z,1538681680.517 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:36:06.509Z,1538681766.509 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-04T19:37:30.335Z,1538681850.335 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T19:37:30.336Z,1538681850.336 [Default:CheckIn:C.Wait] Stopped
2018-10-04T19:37:30.336Z,1538681850.336 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T19:37:30.336Z,1538681850.336 [Default:CheckIn:D] Running Loop=1
2018-10-04T19:37:30.725Z,1538681850.725 [Default:CheckIn:D] Stopped
2018-10-04T19:37:30.725Z,1538681850.725 [Default:CheckIn:E] Running Loop=1
2018-10-04T19:37:31.148Z,1538681851.148 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 921.049284 min 
2018-10-04T19:37:31.148Z,1538681851.148 [Default:CheckIn:E] Stopped
2018-10-04T19:37:31.149Z,1538681851.149 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T19:37:31.149Z,1538681851.149 [Default:CheckIn] Stopped
2018-10-04T19:37:31.149Z,1538681851.149 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T19:37:31.149Z,1538681851.149 [Default:CheckIn](INFO): Running loop #90
2018-10-04T19:37:31.149Z,1538681851.149 [Default:CheckIn] Running Loop=90
2018-10-04T19:37:31.149Z,1538681851.149 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T19:37:31.149Z,1538681851.149 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T19:37:40.727Z,1538681860.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:37:40.727Z,1538681860.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2018-10-04T19:37:40.727Z,1538681860.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:37:40.733Z,1538681860.733 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:37:40.733Z,1538681860.733 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2018-10-04T19:37:40.733Z,1538681860.733 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:37:40.759Z,1538681860.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:37:40.759Z,1538681860.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:37:41.159Z,1538681861.159 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:37:41.159Z,1538681861.159 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2018-10-04T19:37:41.160Z,1538681861.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:37:41.160Z,1538681861.160 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2018-10-04T19:37:41.518Z,1538681861.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:37:41.519Z,1538681861.519 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:37:41.519Z,1538681861.519 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:37:41.519Z,1538681861.519 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:37:41.520Z,1538681861.520 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:37:41.520Z,1538681861.520 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:39:09.187Z,1538681949.187 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T19:39:09.187Z,1538681949.187 [NAL9602] Data Fault, FailCount= 4
2018-10-04T19:39:09.187Z,1538681949.187 [NAL9602](ERROR): Data Fault
2018-10-04T19:39:09.284Z,1538681949.284 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T19:39:09.583Z,1538681949.583 [NAL9602](INFO): Powering down
2018-10-04T19:39:10.452Z,1538681950.452 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T19:39:10.452Z,1538681950.452 [NAL9602] No Fault, FailCount= 4
2018-10-04T19:39:39.671Z,1538681979.671 [NAL9602](INFO): Powering up NAL9602
2018-10-04T19:39:50.871Z,1538681990.871 [NAL9602](INFO): NAL9602 initialized
2018-10-04T19:40:41.839Z,1538682041.839 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:40:41.839Z,1538682041.839 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2018-10-04T19:40:41.839Z,1538682041.839 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:40:41.841Z,1538682041.841 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:40:41.841Z,1538682041.841 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2018-10-04T19:40:41.841Z,1538682041.841 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:40:41.854Z,1538682041.854 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:40:41.854Z,1538682041.854 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:40:42.280Z,1538682042.280 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:40:42.280Z,1538682042.280 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2018-10-04T19:40:42.285Z,1538682042.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:40:42.285Z,1538682042.285 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2018-10-04T19:40:42.628Z,1538682042.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:40:42.629Z,1538682042.629 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:40:42.629Z,1538682042.629 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:40:42.630Z,1538682042.630 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:40:42.630Z,1538682042.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:40:42.631Z,1538682042.631 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:42:33.138Z,1538682153.138 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T19:37:31.1Z
2018-10-04T19:42:33.138Z,1538682153.138 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T19:42:33.138Z,1538682153.138 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T19:42:38.140Z,1538682158.140 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0271.lzma
2018-10-04T19:42:38.921Z,1538682158.921 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0271.lzma.bak
2018-10-04T19:42:38.921Z,1538682158.921 [DataOverHttps](INFO): SBD MOMSN=8611102
2018-10-04T19:42:39.831Z,1538682159.831 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-04T19:42:48.130Z,1538682168.130 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0272.lzma
2018-10-04T19:42:48.905Z,1538682168.905 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0272.lzma.bak
2018-10-04T19:42:48.905Z,1538682168.905 [DataOverHttps](INFO): SBD MOMSN=8611104
2018-10-04T19:42:49.808Z,1538682169.808 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T19:42:49.819Z,1538682169.819 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T19:42:49.819Z,1538682169.819 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T19:42:49.819Z,1538682169.819 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T19:43:43.004Z,1538682223.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:43:43.004Z,1538682223.004 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2018-10-04T19:43:43.004Z,1538682223.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:43:43.011Z,1538682223.011 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:43:43.011Z,1538682223.011 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2018-10-04T19:43:43.011Z,1538682223.011 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:43:43.053Z,1538682223.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:43:43.054Z,1538682223.054 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:43:43.437Z,1538682223.437 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:43:43.438Z,1538682223.438 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2018-10-04T19:43:43.438Z,1538682223.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:43:43.438Z,1538682223.438 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2018-10-04T19:43:43.790Z,1538682223.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:43:43.790Z,1538682223.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:43:43.791Z,1538682223.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:43:43.791Z,1538682223.791 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:43:43.791Z,1538682223.791 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:43:43.792Z,1538682223.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:46:43.951Z,1538682403.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:46:43.951Z,1538682403.951 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2018-10-04T19:46:43.951Z,1538682403.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:46:43.953Z,1538682403.953 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:46:43.953Z,1538682403.953 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2018-10-04T19:46:43.953Z,1538682403.953 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:46:43.966Z,1538682403.966 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:46:43.967Z,1538682403.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:46:44.368Z,1538682404.368 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T19:46:44.369Z,1538682404.369 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2018-10-04T19:46:44.369Z,1538682404.369 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T19:46:44.369Z,1538682404.369 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2018-10-04T19:46:44.736Z,1538682404.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T19:46:44.736Z,1538682404.736 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:46:44.737Z,1538682404.737 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:46:44.737Z,1538682404.737 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T19:46:44.738Z,1538682404.738 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T19:46:44.738Z,1538682404.738 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T19:47:50.282Z,1538682470.282 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T19:47:50.283Z,1538682470.283 [Default:CheckIn:C.Wait] Stopped
2018-10-04T19:47:50.283Z,1538682470.283 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T19:47:50.283Z,1538682470.283 [Default:CheckIn:D] Running Loop=1
2018-10-04T19:47:50.661Z,1538682470.661 [Default:CheckIn:D] Stopped
2018-10-04T19:47:50.665Z,1538682470.665 [Default:CheckIn:E] Running Loop=1
2018-10-04T19:47:51.099Z,1538682471.099 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 931.381510 min 
2018-10-04T19:47:51.099Z,1538682471.099 [Default:CheckIn:E] Stopped
2018-10-04T19:47:51.099Z,1538682471.099 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T19:47:51.099Z,1538682471.099 [Default:CheckIn] Stopped
2018-10-04T19:47:51.100Z,1538682471.100 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T19:47:51.100Z,1538682471.100 [Default:CheckIn](INFO): Running loop #91
2018-10-04T19:47:51.100Z,1538682471.100 [Default:CheckIn] Running Loop=91
2018-10-04T19:47:51.100Z,1538682471.100 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T19:47:51.100Z,1538682471.100 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T19:49:44.840Z,1538682584.840 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:49:44.840Z,1538682584.840 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2018-10-04T19:49:44.840Z,1538682584.840 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T19:49:44.842Z,1538682584.842 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T19:49:44.842Z,1538682584.842 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2018-10-04T19:49:44.842Z,1538682584.842 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T19:49:44.885Z,1538682584.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:49:44.885Z,1538682584.885 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T19:49:44.885Z,1538682584.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:49:44.886Z,1538682584.886 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T19:49:52.034Z,1538682592.034 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T19:49:52.034Z,1538682592.034 [NAL9602] Data Fault, FailCount= 5
2018-10-04T19:49:52.034Z,1538682592.034 [NAL9602](ERROR): Data Fault
2018-10-04T19:49:52.134Z,1538682592.134 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T19:49:52.134Z,1538682592.134 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T19:49:52.425Z,1538682592.425 [NAL9602](INFO): Powering down
2018-10-04T19:49:52.480Z,1538682592.480 [CBIT](INFO): Critical error at 20181004T194952
2018-10-04T19:51:44.314Z,1538682704.314 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T19:51:52.353Z,1538682712.353 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T19:51:52.353Z,1538682712.353 [NAL9602] No Fault, FailCount= 5
2018-10-04T19:51:52.679Z,1538682712.679 [NAL9602](INFO): Powering up NAL9602
2018-10-04T19:52:03.887Z,1538682723.887 [NAL9602](INFO): NAL9602 initialized
2018-10-04T19:52:53.226Z,1538682773.226 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T19:47:51.1Z
2018-10-04T19:52:53.226Z,1538682773.226 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T19:52:53.226Z,1538682773.226 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T19:52:53.918Z,1538682773.918 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0274.lzma
2018-10-04T19:52:54.453Z,1538682774.453 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0274.lzma.bak
2018-10-04T19:52:54.453Z,1538682774.453 [DataOverHttps](INFO): SBD MOMSN=8611108
2018-10-04T19:53:03.738Z,1538682783.738 [DataOverHttps](INFO): Sending 221 bytes from file Logs/20181004T041305/Express0275.lzma
2018-10-04T19:53:04.488Z,1538682784.488 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0275.lzma.bak
2018-10-04T19:53:04.489Z,1538682784.489 [DataOverHttps](INFO): SBD MOMSN=8611111
2018-10-04T19:53:05.451Z,1538682785.451 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T19:53:05.451Z,1538682785.451 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T19:53:05.451Z,1538682785.451 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T19:53:32.410Z,1538682812.410 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T19:53:32.410Z,1538682812.410 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100412582879,35.0, -0.1,   0.0, 0
2018-10-04T19:58:05.993Z,1538683085.993 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T19:58:05.993Z,1538683085.993 [Default:CheckIn:C.Wait] Stopped
2018-10-04T19:58:05.993Z,1538683085.993 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T19:58:05.993Z,1538683085.993 [Default:CheckIn:D] Running Loop=1
2018-10-04T19:58:06.413Z,1538683086.413 [Default:CheckIn:D] Stopped
2018-10-04T19:58:06.413Z,1538683086.413 [Default:CheckIn:E] Running Loop=1
2018-10-04T19:58:06.803Z,1538683086.803 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 941.644076 min 
2018-10-04T19:58:06.804Z,1538683086.804 [Default:CheckIn:E] Stopped
2018-10-04T19:58:06.804Z,1538683086.804 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T19:58:06.804Z,1538683086.804 [Default:CheckIn] Stopped
2018-10-04T19:58:06.804Z,1538683086.804 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T19:58:06.804Z,1538683086.804 [Default:CheckIn](INFO): Running loop #92
2018-10-04T19:58:06.804Z,1538683086.804 [Default:CheckIn] Running Loop=92
2018-10-04T19:58:06.804Z,1538683086.804 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T19:58:06.804Z,1538683086.804 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T20:02:06.491Z,1538683326.491 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T20:02:06.491Z,1538683326.491 [NAL9602] Data Fault, FailCount= 1
2018-10-04T20:02:06.491Z,1538683326.491 [NAL9602](ERROR): Data Fault
2018-10-04T20:02:06.585Z,1538683326.585 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T20:02:06.899Z,1538683326.899 [NAL9602](INFO): Powering down
2018-10-04T20:02:07.758Z,1538683327.758 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T20:02:07.758Z,1538683327.758 [NAL9602] No Fault, FailCount= 1
2018-10-04T20:02:37.135Z,1538683357.135 [NAL9602](INFO): Powering up NAL9602
2018-10-04T20:02:48.335Z,1538683368.335 [NAL9602](INFO): NAL9602 initialized
2018-10-04T20:02:48.360Z,1538683368.360 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T20:03:08.832Z,1538683388.832 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T19:58:06.8Z
2018-10-04T20:03:08.833Z,1538683388.833 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T20:03:08.833Z,1538683388.833 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T20:03:13.945Z,1538683393.945 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0277.lzma
2018-10-04T20:03:14.846Z,1538683394.846 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0277.lzma.bak
2018-10-04T20:03:14.846Z,1538683394.846 [DataOverHttps](INFO): SBD MOMSN=8611117
2018-10-04T20:03:20.291Z,1538683400.291 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T20:03:23.946Z,1538683403.946 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0278.lzma
2018-10-04T20:03:24.725Z,1538683404.725 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0278.lzma.bak
2018-10-04T20:03:24.725Z,1538683404.725 [DataOverHttps](INFO): SBD MOMSN=8611119
2018-10-04T20:03:25.713Z,1538683405.713 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T20:03:25.713Z,1538683405.713 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T20:03:25.713Z,1538683405.713 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T20:03:30.070Z,1538683410.070 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,13842.81
2018-10-04T20:04:15.389Z,1538683455.389 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T20:04:45.153Z,1538683485.153 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:04:45.153Z,1538683485.153 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2018-10-04T20:04:45.154Z,1538683485.154 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:04:45.155Z,1538683485.155 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2018-10-04T20:04:45.507Z,1538683485.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:04:45.507Z,1538683485.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:04:45.508Z,1538683485.508 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:04:45.508Z,1538683485.508 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:04:45.509Z,1538683485.509 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:04:45.509Z,1538683485.509 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:07:45.586Z,1538683665.586 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:07:45.587Z,1538683665.587 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-10-04T20:07:45.587Z,1538683665.587 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:07:45.589Z,1538683665.589 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:07:45.593Z,1538683665.593 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-04T20:07:45.593Z,1538683665.593 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:07:45.614Z,1538683665.614 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:07:45.615Z,1538683665.615 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:07:45.990Z,1538683665.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:07:45.990Z,1538683665.990 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-10-04T20:07:45.990Z,1538683665.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:07:45.990Z,1538683665.990 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-04T20:07:46.390Z,1538683666.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:07:46.391Z,1538683666.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:07:46.391Z,1538683666.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:07:46.391Z,1538683666.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:07:46.392Z,1538683666.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:07:46.392Z,1538683666.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:08:26.113Z,1538683706.113 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T20:08:26.113Z,1538683706.113 [Default:CheckIn:C.Wait] Stopped
2018-10-04T20:08:26.113Z,1538683706.113 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T20:08:26.113Z,1538683706.113 [Default:CheckIn:D] Running Loop=1
2018-10-04T20:08:26.535Z,1538683706.535 [Default:CheckIn:D] Stopped
2018-10-04T20:08:26.535Z,1538683706.535 [Default:CheckIn:E] Running Loop=1
2018-10-04T20:08:26.909Z,1538683706.909 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 951.979427 min 
2018-10-04T20:08:26.909Z,1538683706.909 [Default:CheckIn:E] Stopped
2018-10-04T20:08:26.910Z,1538683706.910 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T20:08:26.910Z,1538683706.910 [Default:CheckIn] Stopped
2018-10-04T20:08:26.910Z,1538683706.910 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T20:08:26.910Z,1538683706.910 [Default:CheckIn](INFO): Running loop #93
2018-10-04T20:08:26.910Z,1538683706.910 [Default:CheckIn] Running Loop=93
2018-10-04T20:08:26.910Z,1538683706.910 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T20:08:26.910Z,1538683706.910 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T20:10:46.478Z,1538683846.478 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:10:46.478Z,1538683846.478 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-10-04T20:10:46.478Z,1538683846.478 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:10:46.480Z,1538683846.480 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:10:46.480Z,1538683846.480 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-04T20:10:46.480Z,1538683846.480 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:10:46.493Z,1538683846.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:10:46.493Z,1538683846.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:10:46.871Z,1538683846.871 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:10:46.871Z,1538683846.871 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-10-04T20:10:46.872Z,1538683846.872 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:10:46.872Z,1538683846.872 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-04T20:10:47.234Z,1538683847.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:10:47.234Z,1538683847.234 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:10:47.235Z,1538683847.235 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:10:47.235Z,1538683847.235 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:10:47.236Z,1538683847.236 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:10:47.236Z,1538683847.236 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:12:50.223Z,1538683970.223 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T20:12:50.223Z,1538683970.223 [NAL9602] Data Fault, FailCount= 2
2018-10-04T20:12:50.223Z,1538683970.223 [NAL9602](ERROR): Data Fault
2018-10-04T20:12:50.309Z,1538683970.309 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T20:12:53.499Z,1538683973.499 [NAL9602](INFO): Powering down
2018-10-04T20:12:54.127Z,1538683974.127 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T20:12:54.127Z,1538683974.127 [NAL9602] No Fault, FailCount= 2
2018-10-04T20:13:23.631Z,1538684003.631 [NAL9602](INFO): Powering up NAL9602
2018-10-04T20:13:28.468Z,1538684008.468 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T20:08:26.9Z
2018-10-04T20:13:28.468Z,1538684008.468 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T20:13:28.469Z,1538684008.469 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T20:13:33.429Z,1538684013.429 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0280.lzma
2018-10-04T20:13:34.202Z,1538684014.202 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0280.lzma.bak
2018-10-04T20:13:34.202Z,1538684014.202 [DataOverHttps](INFO): SBD MOMSN=8611123
2018-10-04T20:13:35.096Z,1538684015.096 [NAL9602](INFO): NAL9602 initialized
2018-10-04T20:13:43.556Z,1538684023.556 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0281.lzma
2018-10-04T20:13:44.337Z,1538684024.337 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0281.lzma.bak
2018-10-04T20:13:44.337Z,1538684024.337 [DataOverHttps](INFO): SBD MOMSN=8611125
2018-10-04T20:13:45.332Z,1538684025.332 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T20:13:45.332Z,1538684025.332 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T20:13:45.332Z,1538684025.332 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T20:13:48.608Z,1538684028.608 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:13:48.609Z,1538684028.609 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-10-04T20:13:48.637Z,1538684028.637 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:13:48.639Z,1538684028.639 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:13:48.639Z,1538684028.639 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-04T20:13:48.639Z,1538684028.639 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:13:48.672Z,1538684028.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:13:48.672Z,1538684028.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:13:48.806Z,1538684028.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:13:48.806Z,1538684028.806 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-10-04T20:13:48.807Z,1538684028.807 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:13:48.807Z,1538684028.807 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-04T20:13:49.165Z,1538684029.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:13:49.165Z,1538684029.165 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:13:49.166Z,1538684029.166 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:13:49.166Z,1538684029.166 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:13:49.166Z,1538684029.166 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:13:49.167Z,1538684029.167 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:16:46.433Z,1538684206.433 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T20:16:49.266Z,1538684209.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:16:49.266Z,1538684209.266 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-10-04T20:16:49.266Z,1538684209.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:16:49.268Z,1538684209.268 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:16:49.268Z,1538684209.268 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-04T20:16:49.268Z,1538684209.268 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:16:49.289Z,1538684209.289 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:16:49.289Z,1538684209.289 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:16:49.674Z,1538684209.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:16:49.674Z,1538684209.674 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-10-04T20:16:49.675Z,1538684209.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:16:49.675Z,1538684209.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-04T20:16:50.078Z,1538684210.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:16:50.078Z,1538684210.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:16:50.078Z,1538684210.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:16:50.079Z,1538684210.079 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:16:50.079Z,1538684210.079 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:16:50.080Z,1538684210.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:18:45.601Z,1538684325.601 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T20:18:45.601Z,1538684325.601 [Default:CheckIn:C.Wait] Stopped
2018-10-04T20:18:45.601Z,1538684325.601 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T20:18:45.601Z,1538684325.601 [Default:CheckIn:D] Running Loop=1
2018-10-04T20:18:46.001Z,1538684326.001 [Default:CheckIn:D] Stopped
2018-10-04T20:18:46.001Z,1538684326.001 [Default:CheckIn:E] Running Loop=1
2018-10-04T20:18:46.411Z,1538684326.411 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 962.303841 min 
2018-10-04T20:18:46.411Z,1538684326.411 [Default:CheckIn:E] Stopped
2018-10-04T20:18:46.411Z,1538684326.411 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T20:18:46.411Z,1538684326.411 [Default:CheckIn] Stopped
2018-10-04T20:18:46.411Z,1538684326.411 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T20:18:46.412Z,1538684326.412 [Default:CheckIn](INFO): Running loop #94
2018-10-04T20:18:46.412Z,1538684326.412 [Default:CheckIn] Running Loop=94
2018-10-04T20:18:46.412Z,1538684326.412 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T20:18:46.412Z,1538684326.412 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T20:19:50.179Z,1538684390.179 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:19:50.179Z,1538684390.179 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-10-04T20:19:50.179Z,1538684390.179 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:19:50.185Z,1538684390.185 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:19:50.186Z,1538684390.186 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-04T20:19:50.186Z,1538684390.186 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:19:50.207Z,1538684390.207 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:19:50.207Z,1538684390.207 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:19:50.598Z,1538684390.598 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:19:50.598Z,1538684390.598 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-10-04T20:19:50.599Z,1538684390.599 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:19:50.599Z,1538684390.599 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-04T20:19:50.982Z,1538684390.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:19:50.983Z,1538684390.983 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:19:50.984Z,1538684390.984 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:19:50.985Z,1538684390.985 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:19:50.986Z,1538684390.986 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:19:50.987Z,1538684390.987 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:22:51.308Z,1538684571.308 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:22:51.308Z,1538684571.308 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-10-04T20:22:51.308Z,1538684571.308 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:22:51.314Z,1538684571.314 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:22:51.314Z,1538684571.314 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-04T20:22:51.314Z,1538684571.314 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:22:51.339Z,1538684571.339 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:22:51.340Z,1538684571.340 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:22:51.735Z,1538684571.735 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:22:51.735Z,1538684571.735 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-10-04T20:22:51.735Z,1538684571.735 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:22:51.735Z,1538684571.735 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-04T20:22:52.115Z,1538684572.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:22:52.116Z,1538684572.116 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:22:52.116Z,1538684572.116 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:22:52.116Z,1538684572.116 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:22:52.121Z,1538684572.121 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:22:52.121Z,1538684572.121 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:23:39.827Z,1538684619.827 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T20:23:39.827Z,1538684619.827 [NAL9602] Data Fault, FailCount= 3
2018-10-04T20:23:39.827Z,1538684619.827 [NAL9602](ERROR): Data Fault
2018-10-04T20:23:39.888Z,1538684619.888 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T20:23:40.219Z,1538684620.219 [NAL9602](INFO): Powering down
2018-10-04T20:23:41.079Z,1538684621.079 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T20:23:41.080Z,1538684621.080 [NAL9602] No Fault, FailCount= 3
2018-10-04T20:23:48.661Z,1538684628.661 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T20:18:46.4Z
2018-10-04T20:23:48.661Z,1538684628.661 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T20:23:48.662Z,1538684628.662 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T20:23:53.629Z,1538684633.629 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0283.lzma
2018-10-04T20:23:54.397Z,1538684634.397 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0283.lzma.bak
2018-10-04T20:23:54.397Z,1538684634.397 [DataOverHttps](INFO): SBD MOMSN=8611129
2018-10-04T20:24:03.595Z,1538684643.595 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0284.lzma
2018-10-04T20:24:04.373Z,1538684644.373 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0284.lzma.bak
2018-10-04T20:24:04.374Z,1538684644.374 [DataOverHttps](INFO): SBD MOMSN=8611131
2018-10-04T20:24:05.326Z,1538684645.326 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T20:24:05.326Z,1538684645.326 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T20:24:05.326Z,1538684645.326 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T20:24:10.259Z,1538684650.259 [NAL9602](INFO): Powering up NAL9602
2018-10-04T20:24:21.455Z,1538684661.455 [NAL9602](INFO): NAL9602 initialized
2018-10-04T20:25:55.014Z,1538684755.014 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:25:55.014Z,1538684755.014 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-10-04T20:25:55.014Z,1538684755.014 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:25:55.018Z,1538684755.018 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:25:55.018Z,1538684755.018 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-04T20:25:55.018Z,1538684755.018 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:25:55.040Z,1538684755.040 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:25:55.040Z,1538684755.040 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:25:55.186Z,1538684755.186 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:25:55.186Z,1538684755.186 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-10-04T20:25:55.186Z,1538684755.186 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:25:55.186Z,1538684755.186 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-04T20:25:55.537Z,1538684755.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:25:55.538Z,1538684755.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:25:55.538Z,1538684755.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:25:55.539Z,1538684755.539 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:25:55.539Z,1538684755.539 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:25:55.539Z,1538684755.539 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:28:55.691Z,1538684935.691 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:28:55.691Z,1538684935.691 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-10-04T20:28:55.691Z,1538684935.691 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:28:55.697Z,1538684935.697 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:28:55.698Z,1538684935.698 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-04T20:28:55.698Z,1538684935.698 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:28:55.719Z,1538684935.719 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:28:55.719Z,1538684935.719 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:28:56.111Z,1538684936.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:28:56.111Z,1538684936.111 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-10-04T20:28:56.111Z,1538684936.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:28:56.111Z,1538684936.111 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-04T20:28:56.516Z,1538684936.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:28:56.521Z,1538684936.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:28:56.521Z,1538684936.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:28:56.522Z,1538684936.522 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:28:56.522Z,1538684936.522 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:28:56.523Z,1538684936.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:29:05.710Z,1538684945.710 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T20:29:05.710Z,1538684945.710 [Default:CheckIn:C.Wait] Stopped
2018-10-04T20:29:05.710Z,1538684945.710 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T20:29:05.710Z,1538684945.710 [Default:CheckIn:D] Running Loop=1
2018-10-04T20:29:06.110Z,1538684946.110 [Default:CheckIn:D] Stopped
2018-10-04T20:29:06.110Z,1538684946.110 [Default:CheckIn:E] Running Loop=1
2018-10-04T20:29:06.521Z,1538684946.521 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 972.639063 min 
2018-10-04T20:29:06.521Z,1538684946.521 [Default:CheckIn:E] Stopped
2018-10-04T20:29:06.521Z,1538684946.521 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T20:29:06.521Z,1538684946.521 [Default:CheckIn] Stopped
2018-10-04T20:29:06.521Z,1538684946.521 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T20:29:06.522Z,1538684946.522 [Default:CheckIn](INFO): Running loop #95
2018-10-04T20:29:06.522Z,1538684946.522 [Default:CheckIn] Running Loop=95
2018-10-04T20:29:06.522Z,1538684946.522 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T20:29:06.522Z,1538684946.522 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T20:31:56.570Z,1538685116.570 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:31:56.571Z,1538685116.571 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-10-04T20:31:56.571Z,1538685116.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:31:56.573Z,1538685116.573 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:31:56.573Z,1538685116.573 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-04T20:31:56.573Z,1538685116.573 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:31:56.616Z,1538685116.616 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:31:56.617Z,1538685116.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:31:56.967Z,1538685116.967 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:31:56.967Z,1538685116.967 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-10-04T20:31:56.967Z,1538685116.967 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:31:56.968Z,1538685116.968 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-04T20:31:57.365Z,1538685117.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:31:57.366Z,1538685117.366 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:31:57.366Z,1538685117.366 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:31:57.367Z,1538685117.367 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:31:57.367Z,1538685117.367 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:31:57.367Z,1538685117.367 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:34:08.831Z,1538685248.831 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T20:29:06.5Z
2018-10-04T20:34:08.831Z,1538685248.831 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T20:34:08.831Z,1538685248.831 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T20:34:13.845Z,1538685253.845 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0286.lzma
2018-10-04T20:34:14.621Z,1538685254.621 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0286.lzma.bak
2018-10-04T20:34:14.621Z,1538685254.621 [DataOverHttps](INFO): SBD MOMSN=8611135
2018-10-04T20:34:23.840Z,1538685263.840 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20181004T041305/Express0287.lzma
2018-10-04T20:34:23.849Z,1538685263.849 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T20:34:23.849Z,1538685263.849 [NAL9602] Data Fault, FailCount= 4
2018-10-04T20:34:23.849Z,1538685263.849 [NAL9602](ERROR): Data Fault
2018-10-04T20:34:23.925Z,1538685263.925 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T20:34:24.211Z,1538685264.211 [NAL9602](INFO): Powering down
2018-10-04T20:34:24.593Z,1538685264.593 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0287.lzma.bak
2018-10-04T20:34:24.594Z,1538685264.594 [DataOverHttps](INFO): SBD MOMSN=8611137
2018-10-04T20:34:25.547Z,1538685265.547 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T20:34:25.548Z,1538685265.548 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T20:34:25.548Z,1538685265.548 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T20:34:25.575Z,1538685265.575 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T20:34:25.575Z,1538685265.575 [NAL9602] No Fault, FailCount= 4
2018-10-04T20:34:54.475Z,1538685294.475 [NAL9602](INFO): Powering up NAL9602
2018-10-04T20:34:57.726Z,1538685297.726 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:34:57.726Z,1538685297.726 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-10-04T20:34:57.727Z,1538685297.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:34:57.728Z,1538685297.728 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:34:57.729Z,1538685297.729 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-04T20:34:57.733Z,1538685297.733 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:34:57.758Z,1538685297.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:34:57.759Z,1538685297.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:34:58.175Z,1538685298.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:34:58.175Z,1538685298.175 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-10-04T20:34:58.176Z,1538685298.176 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:34:58.176Z,1538685298.176 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-04T20:34:58.509Z,1538685298.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:34:58.510Z,1538685298.510 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:34:58.510Z,1538685298.510 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:34:58.511Z,1538685298.511 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:34:58.511Z,1538685298.511 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:34:58.511Z,1538685298.511 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:35:05.007Z,1538685305.007 [NAL9602](INFO): NAL9602 initialized
2018-10-04T20:36:16.412Z,1538685376.412 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.847,*-0.010,*0.000
2018-10-04T20:38:00.971Z,1538685480.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:38:00.972Z,1538685480.972 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-10-04T20:38:00.972Z,1538685480.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:38:00.978Z,1538685480.978 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:38:00.978Z,1538685480.978 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-04T20:38:00.978Z,1538685480.978 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:38:01.007Z,1538685481.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:38:01.008Z,1538685481.008 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:38:01.115Z,1538685481.115 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:38:01.115Z,1538685481.115 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-10-04T20:38:01.116Z,1538685481.116 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:38:01.116Z,1538685481.116 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-04T20:38:01.490Z,1538685481.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:38:01.490Z,1538685481.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:38:01.491Z,1538685481.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:38:01.491Z,1538685481.491 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:38:01.491Z,1538685481.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:38:01.492Z,1538685481.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:38:02.272Z,1538685482.272 [RDI_Pathfinder](ERROR): Failed to parse:
:BE,-32768,-32768,-32768,V
2018-10-04T20:39:26.094Z,1538685566.094 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T20:39:26.094Z,1538685566.094 [Default:CheckIn:C.Wait] Stopped
2018-10-04T20:39:26.094Z,1538685566.094 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T20:39:26.094Z,1538685566.094 [Default:CheckIn:D] Running Loop=1
2018-10-04T20:39:26.458Z,1538685566.458 [Default:CheckIn:D] Stopped
2018-10-04T20:39:26.458Z,1538685566.458 [Default:CheckIn:E] Running Loop=1
2018-10-04T20:39:26.845Z,1538685566.845 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 982.978190 min 
2018-10-04T20:39:26.845Z,1538685566.845 [Default:CheckIn:E] Stopped
2018-10-04T20:39:26.845Z,1538685566.845 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T20:39:26.845Z,1538685566.845 [Default:CheckIn] Stopped
2018-10-04T20:39:26.846Z,1538685566.846 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T20:39:26.846Z,1538685566.846 [Default:CheckIn](INFO): Running loop #96
2018-10-04T20:39:26.846Z,1538685566.846 [Default:CheckIn] Running Loop=96
2018-10-04T20:39:26.846Z,1538685566.846 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T20:39:26.846Z,1538685566.846 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T20:41:01.491Z,1538685661.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:41:01.491Z,1538685661.491 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-10-04T20:41:01.491Z,1538685661.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:41:01.493Z,1538685661.493 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:41:01.493Z,1538685661.493 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-04T20:41:01.493Z,1538685661.493 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:41:01.506Z,1538685661.506 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:41:01.506Z,1538685661.506 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:41:01.922Z,1538685661.922 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:41:01.923Z,1538685661.923 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-10-04T20:41:01.924Z,1538685661.924 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:41:01.924Z,1538685661.924 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-04T20:41:02.311Z,1538685662.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:41:02.311Z,1538685662.311 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:41:02.312Z,1538685662.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:41:02.312Z,1538685662.312 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:41:02.317Z,1538685662.317 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:41:02.317Z,1538685662.317 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:44:02.339Z,1538685842.339 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:44:02.339Z,1538685842.339 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-10-04T20:44:02.339Z,1538685842.339 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:44:02.341Z,1538685842.341 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:44:02.341Z,1538685842.341 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-04T20:44:02.342Z,1538685842.342 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:44:02.355Z,1538685842.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:44:02.355Z,1538685842.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:44:02.733Z,1538685842.733 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:44:02.733Z,1538685842.733 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-10-04T20:44:02.734Z,1538685842.734 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:44:02.734Z,1538685842.734 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-04T20:44:03.128Z,1538685843.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:44:03.128Z,1538685843.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:44:03.128Z,1538685843.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:44:03.130Z,1538685843.130 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:44:03.130Z,1538685843.130 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:44:03.130Z,1538685843.130 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:44:29.163Z,1538685869.163 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T20:39:26.8Z
2018-10-04T20:44:29.163Z,1538685869.163 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T20:44:29.163Z,1538685869.163 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T20:44:34.116Z,1538685874.116 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0289.lzma
2018-10-04T20:44:34.897Z,1538685874.897 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0289.lzma.bak
2018-10-04T20:44:34.897Z,1538685874.897 [DataOverHttps](INFO): SBD MOMSN=8611140
2018-10-04T20:44:44.096Z,1538685884.096 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0290.lzma
2018-10-04T20:44:44.869Z,1538685884.869 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0290.lzma.bak
2018-10-04T20:44:44.869Z,1538685884.869 [DataOverHttps](INFO): SBD MOMSN=8611142
2018-10-04T20:44:45.773Z,1538685885.773 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T20:44:45.783Z,1538685885.783 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T20:44:45.783Z,1538685885.783 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T20:44:45.783Z,1538685885.783 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T20:45:06.007Z,1538685906.007 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T20:45:06.007Z,1538685906.007 [NAL9602] Data Fault, FailCount= 5
2018-10-04T20:45:06.007Z,1538685906.007 [NAL9602](ERROR): Data Fault
2018-10-04T20:45:06.094Z,1538685906.094 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T20:45:06.095Z,1538685906.095 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T20:45:06.419Z,1538685906.419 [NAL9602](INFO): Powering down
2018-10-04T20:45:06.496Z,1538685906.496 [CBIT](INFO): Critical error at 20181004T204506
2018-10-04T20:47:03.487Z,1538686023.487 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:47:03.487Z,1538686023.487 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-10-04T20:47:03.487Z,1538686023.487 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:47:03.493Z,1538686023.493 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:47:03.493Z,1538686023.493 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-04T20:47:03.494Z,1538686023.494 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:47:03.525Z,1538686023.525 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:47:03.526Z,1538686023.526 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:47:03.906Z,1538686023.906 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:47:03.906Z,1538686023.906 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-10-04T20:47:03.906Z,1538686023.906 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:47:03.906Z,1538686023.906 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-04T20:47:04.289Z,1538686024.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:47:04.290Z,1538686024.290 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:47:04.290Z,1538686024.290 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:47:04.290Z,1538686024.290 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:47:04.291Z,1538686024.291 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:47:04.291Z,1538686024.291 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:47:06.339Z,1538686026.339 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T20:47:06.340Z,1538686026.340 [NAL9602] No Fault, FailCount= 5
2018-10-04T20:47:06.643Z,1538686026.643 [NAL9602](INFO): Powering up NAL9602
2018-10-04T20:47:17.527Z,1538686037.527 [NAL9602](INFO): NAL9602 initialized
2018-10-04T20:49:46.255Z,1538686186.255 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T20:49:46.255Z,1538686186.255 [Default:CheckIn:C.Wait] Stopped
2018-10-04T20:49:46.255Z,1538686186.255 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T20:49:46.255Z,1538686186.255 [Default:CheckIn:D] Running Loop=1
2018-10-04T20:49:46.670Z,1538686186.670 [Default:CheckIn:D] Stopped
2018-10-04T20:49:46.670Z,1538686186.670 [Default:CheckIn:E] Running Loop=1
2018-10-04T20:49:47.042Z,1538686187.042 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 993.315039 min 
2018-10-04T20:49:47.042Z,1538686187.042 [Default:CheckIn:E] Stopped
2018-10-04T20:49:47.042Z,1538686187.042 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T20:49:47.042Z,1538686187.042 [Default:CheckIn] Stopped
2018-10-04T20:49:47.042Z,1538686187.042 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T20:49:47.043Z,1538686187.043 [Default:CheckIn](INFO): Running loop #97
2018-10-04T20:49:47.043Z,1538686187.043 [Default:CheckIn] Running Loop=97
2018-10-04T20:49:47.043Z,1538686187.043 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T20:49:47.043Z,1538686187.043 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T20:50:06.650Z,1538686206.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:50:06.650Z,1538686206.650 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-10-04T20:50:06.650Z,1538686206.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:50:06.652Z,1538686206.652 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:50:06.652Z,1538686206.652 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-04T20:50:06.652Z,1538686206.652 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:50:06.682Z,1538686206.682 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:50:06.682Z,1538686206.682 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:50:06.816Z,1538686206.816 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:50:06.821Z,1538686206.821 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-10-04T20:50:06.821Z,1538686206.821 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:50:06.821Z,1538686206.821 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-04T20:50:07.159Z,1538686207.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:50:07.160Z,1538686207.160 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:50:07.160Z,1538686207.160 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:50:07.160Z,1538686207.160 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:50:07.161Z,1538686207.161 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:50:07.161Z,1538686207.161 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:50:43.231Z,1538686243.231 [RDI_Pathfinder](ERROR): Failed to parse:
:BE,-32768,-32768,-32768,V
2018-10-04T20:53:07.215Z,1538686387.215 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:53:07.216Z,1538686387.216 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-10-04T20:53:07.216Z,1538686387.216 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:53:07.218Z,1538686387.218 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:53:07.218Z,1538686387.218 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-04T20:53:07.218Z,1538686387.218 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:53:07.245Z,1538686387.245 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:53:07.249Z,1538686387.249 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:53:07.632Z,1538686387.632 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:53:07.632Z,1538686387.632 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-10-04T20:53:07.637Z,1538686387.637 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:53:07.637Z,1538686387.637 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-04T20:53:08.037Z,1538686388.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:53:08.038Z,1538686388.038 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:53:08.038Z,1538686388.038 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:53:08.038Z,1538686388.038 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:53:08.039Z,1538686388.039 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:53:08.039Z,1538686388.039 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:54:49.135Z,1538686489.135 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T20:49:47.0Z
2018-10-04T20:54:49.135Z,1538686489.135 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T20:54:49.135Z,1538686489.135 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T20:54:49.827Z,1538686489.827 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0292.lzma
2018-10-04T20:54:50.375Z,1538686490.375 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0292.lzma.bak
2018-10-04T20:54:50.376Z,1538686490.376 [DataOverHttps](INFO): SBD MOMSN=8611146
2018-10-04T20:55:00.196Z,1538686500.196 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0293.lzma
2018-10-04T20:55:02.517Z,1538686502.517 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0293.lzma.bak
2018-10-04T20:55:02.518Z,1538686502.518 [DataOverHttps](INFO): SBD MOMSN=8611149
2018-10-04T20:55:03.243Z,1538686503.243 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T20:55:03.243Z,1538686503.243 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T20:55:03.243Z,1538686503.243 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T20:56:08.373Z,1538686568.373 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:56:08.373Z,1538686568.373 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-10-04T20:56:08.374Z,1538686568.374 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:56:08.376Z,1538686568.376 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:56:08.376Z,1538686568.376 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-04T20:56:08.376Z,1538686568.376 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:56:08.402Z,1538686568.402 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:56:08.402Z,1538686568.402 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:56:08.772Z,1538686568.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:56:08.772Z,1538686568.772 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-10-04T20:56:08.772Z,1538686568.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:56:08.773Z,1538686568.773 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-04T20:56:09.171Z,1538686569.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:56:09.172Z,1538686569.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:56:09.172Z,1538686569.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:56:09.177Z,1538686569.177 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:56:09.177Z,1538686569.177 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:56:09.178Z,1538686569.178 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:57:18.467Z,1538686638.467 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T20:57:18.467Z,1538686638.467 [NAL9602] Data Fault, FailCount= 1
2018-10-04T20:57:18.467Z,1538686638.467 [NAL9602](ERROR): Data Fault
2018-10-04T20:57:18.536Z,1538686638.536 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T20:57:18.867Z,1538686638.867 [NAL9602](INFO): Powering down
2018-10-04T20:57:19.724Z,1538686639.724 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T20:57:19.724Z,1538686639.724 [NAL9602] No Fault, FailCount= 1
2018-10-04T20:57:48.955Z,1538686668.955 [NAL9602](INFO): Powering up NAL9602
2018-10-04T20:58:00.156Z,1538686680.156 [NAL9602](INFO): NAL9602 initialized
2018-10-04T20:59:09.209Z,1538686749.209 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:59:09.209Z,1538686749.209 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-10-04T20:59:09.209Z,1538686749.209 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T20:59:09.211Z,1538686749.211 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T20:59:09.211Z,1538686749.211 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-04T20:59:09.211Z,1538686749.211 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T20:59:09.224Z,1538686749.224 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T20:59:09.225Z,1538686749.225 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T20:59:09.631Z,1538686749.631 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T20:59:09.631Z,1538686749.631 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-10-04T20:59:09.632Z,1538686749.632 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T20:59:09.632Z,1538686749.632 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-04T20:59:10.002Z,1538686750.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T20:59:10.002Z,1538686750.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:59:10.003Z,1538686750.003 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:59:10.003Z,1538686750.003 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T20:59:10.004Z,1538686750.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T20:59:10.004Z,1538686750.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T20:59:15.278Z,1538686755.278 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T21:00:03.404Z,1538686803.404 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T21:00:03.404Z,1538686803.404 [Default:CheckIn:C.Wait] Stopped
2018-10-04T21:00:03.404Z,1538686803.404 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T21:00:03.404Z,1538686803.404 [Default:CheckIn:D] Running Loop=1
2018-10-04T21:00:03.822Z,1538686803.822 [Default:CheckIn:D] Stopped
2018-10-04T21:00:03.822Z,1538686803.822 [Default:CheckIn:E] Running Loop=1
2018-10-04T21:00:04.245Z,1538686804.245 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1003.600911 min 
2018-10-04T21:00:04.245Z,1538686804.245 [Default:CheckIn:E] Stopped
2018-10-04T21:00:04.245Z,1538686804.245 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T21:00:04.245Z,1538686804.245 [Default:CheckIn] Stopped
2018-10-04T21:00:04.245Z,1538686804.245 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T21:00:04.246Z,1538686804.246 [Default:CheckIn](INFO): Running loop #98
2018-10-04T21:00:04.246Z,1538686804.246 [Default:CheckIn] Running Loop=98
2018-10-04T21:00:04.246Z,1538686804.246 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T21:00:04.246Z,1538686804.246 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T21:01:01.231Z,1538686861.231 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.880, 0.001, 65.535
2018-10-04T21:02:10.285Z,1538686930.285 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:02:10.285Z,1538686930.285 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-10-04T21:02:10.285Z,1538686930.285 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:02:10.287Z,1538686930.287 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:02:10.287Z,1538686930.287 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-04T21:02:10.287Z,1538686930.287 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:02:10.300Z,1538686930.300 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:02:10.301Z,1538686930.301 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:02:10.427Z,1538686930.427 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:02:10.427Z,1538686930.427 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-10-04T21:02:10.427Z,1538686930.427 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:02:10.428Z,1538686930.428 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-04T21:02:10.758Z,1538686930.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:02:10.758Z,1538686930.758 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:02:10.759Z,1538686930.759 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:02:10.759Z,1538686930.759 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:02:10.759Z,1538686930.759 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:02:10.760Z,1538686930.760 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:05:06.680Z,1538687106.680 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T21:00:04.2Z
2018-10-04T21:05:06.681Z,1538687106.681 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T21:05:06.681Z,1538687106.681 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T21:05:11.562Z,1538687111.562 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:05:11.562Z,1538687111.562 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-10-04T21:05:11.562Z,1538687111.562 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:05:11.564Z,1538687111.564 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:05:11.564Z,1538687111.564 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-04T21:05:11.564Z,1538687111.564 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:05:11.594Z,1538687111.594 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:05:11.594Z,1538687111.594 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:05:11.642Z,1538687111.642 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0295.lzma
2018-10-04T21:05:11.719Z,1538687111.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:05:11.719Z,1538687111.719 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-10-04T21:05:11.720Z,1538687111.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:05:11.720Z,1538687111.720 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-04T21:05:12.080Z,1538687112.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:05:12.080Z,1538687112.080 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:05:12.085Z,1538687112.085 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:05:12.085Z,1538687112.085 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:05:12.086Z,1538687112.086 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:05:12.086Z,1538687112.086 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:05:12.409Z,1538687112.409 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0295.lzma.bak
2018-10-04T21:05:12.409Z,1538687112.409 [DataOverHttps](INFO): SBD MOMSN=8611153
2018-10-04T21:05:21.645Z,1538687121.645 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0296.lzma
2018-10-04T21:05:22.405Z,1538687122.405 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0296.lzma.bak
2018-10-04T21:05:22.406Z,1538687122.406 [DataOverHttps](INFO): SBD MOMSN=8611155
2018-10-04T21:05:23.433Z,1538687123.433 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T21:05:23.433Z,1538687123.433 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T21:05:23.434Z,1538687123.434 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T21:08:04.911Z,1538687284.911 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T21:08:04.911Z,1538687284.911 [NAL9602] Data Fault, FailCount= 2
2018-10-04T21:08:04.911Z,1538687284.911 [NAL9602](ERROR): Data Fault
2018-10-04T21:08:04.994Z,1538687284.994 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T21:08:05.311Z,1538687285.311 [NAL9602](INFO): Powering down
2018-10-04T21:08:06.198Z,1538687286.198 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T21:08:06.198Z,1538687286.198 [NAL9602] No Fault, FailCount= 2
2018-10-04T21:08:12.157Z,1538687292.157 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:08:12.161Z,1538687292.161 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-10-04T21:08:12.161Z,1538687292.161 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:08:12.163Z,1538687292.163 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:08:12.163Z,1538687292.163 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-10-04T21:08:12.164Z,1538687292.164 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:08:12.194Z,1538687292.194 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:08:12.195Z,1538687292.195 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:08:12.586Z,1538687292.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:08:12.587Z,1538687292.587 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-10-04T21:08:12.587Z,1538687292.587 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:08:12.587Z,1538687292.587 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-10-04T21:08:12.971Z,1538687292.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:08:12.971Z,1538687292.971 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:08:12.971Z,1538687292.971 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:08:12.972Z,1538687292.972 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:08:12.972Z,1538687292.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:08:12.973Z,1538687292.973 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:08:35.407Z,1538687315.407 [NAL9602](INFO): Powering up NAL9602
2018-10-04T21:08:46.611Z,1538687326.611 [NAL9602](INFO): NAL9602 initialized
2018-10-04T21:10:10.312Z,1538687410.312 [RDI_Pathfinder](ERROR): Failed to parse:     +0.00,        +0.00,        +0.00,   0.00,17838.48
2018-10-04T21:10:23.944Z,1538687423.944 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T21:10:23.944Z,1538687423.944 [Default:CheckIn:C.Wait] Stopped
2018-10-04T21:10:23.944Z,1538687423.944 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T21:10:23.944Z,1538687423.944 [Default:CheckIn:D] Running Loop=1
2018-10-04T21:10:24.332Z,1538687424.332 [Default:CheckIn:D] Stopped
2018-10-04T21:10:24.333Z,1538687424.333 [Default:CheckIn:E] Running Loop=1
2018-10-04T21:10:24.725Z,1538687424.725 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1013.942773 min 
2018-10-04T21:10:24.725Z,1538687424.725 [Default:CheckIn:E] Stopped
2018-10-04T21:10:24.725Z,1538687424.725 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T21:10:24.725Z,1538687424.725 [Default:CheckIn] Stopped
2018-10-04T21:10:24.725Z,1538687424.725 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T21:10:24.726Z,1538687424.726 [Default:CheckIn](INFO): Running loop #99
2018-10-04T21:10:24.726Z,1538687424.726 [Default:CheckIn] Running Loop=99
2018-10-04T21:10:24.726Z,1538687424.726 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T21:10:24.726Z,1538687424.726 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T21:11:13.213Z,1538687473.213 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:11:13.213Z,1538687473.213 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-10-04T21:11:13.213Z,1538687473.213 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:11:13.215Z,1538687473.215 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:11:13.215Z,1538687473.215 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-10-04T21:11:13.215Z,1538687473.215 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:11:13.245Z,1538687473.245 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:11:13.245Z,1538687473.245 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:11:13.622Z,1538687473.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:11:13.622Z,1538687473.622 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-10-04T21:11:13.623Z,1538687473.623 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:11:13.623Z,1538687473.623 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-10-04T21:11:14.018Z,1538687474.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:11:14.019Z,1538687474.019 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:11:14.019Z,1538687474.019 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:11:14.019Z,1538687474.019 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:11:14.020Z,1538687474.020 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:11:14.020Z,1538687474.020 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:11:42.344Z,1538687502.344 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T21:14:15.788Z,1538687655.788 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:14:15.788Z,1538687655.788 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-10-04T21:14:15.788Z,1538687655.788 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:14:15.790Z,1538687655.790 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:14:15.790Z,1538687655.790 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-10-04T21:14:15.791Z,1538687655.791 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:14:15.804Z,1538687655.804 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:14:15.804Z,1538687655.804 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:14:15.946Z,1538687655.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:14:15.946Z,1538687655.946 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-10-04T21:14:15.947Z,1538687655.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:14:15.947Z,1538687655.947 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-10-04T21:14:16.309Z,1538687656.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:14:16.310Z,1538687656.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:14:16.310Z,1538687656.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:14:16.311Z,1538687656.311 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:14:16.311Z,1538687656.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:14:16.311Z,1538687656.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:15:26.462Z,1538687726.462 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T21:10:24.7Z
2018-10-04T21:15:26.462Z,1538687726.462 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T21:15:26.462Z,1538687726.462 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T21:15:32.330Z,1538687732.330 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0298.lzma
2018-10-04T21:15:33.101Z,1538687733.101 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0298.lzma.bak
2018-10-04T21:15:33.101Z,1538687733.101 [DataOverHttps](INFO): SBD MOMSN=8611159
2018-10-04T21:15:42.301Z,1538687742.301 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0299.lzma
2018-10-04T21:15:43.077Z,1538687743.077 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0299.lzma.bak
2018-10-04T21:15:43.081Z,1538687743.081 [DataOverHttps](INFO): SBD MOMSN=8611161
2018-10-04T21:15:46.333Z,1538687746.333 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T21:15:46.333Z,1538687746.333 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T21:15:46.333Z,1538687746.333 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T21:17:16.506Z,1538687836.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:17:16.506Z,1538687836.506 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-10-04T21:17:16.507Z,1538687836.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:17:16.508Z,1538687836.508 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:17:16.508Z,1538687836.508 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-10-04T21:17:16.509Z,1538687836.509 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:17:16.550Z,1538687836.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:17:16.550Z,1538687836.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:17:16.908Z,1538687836.908 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:17:16.908Z,1538687836.908 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-10-04T21:17:16.908Z,1538687836.908 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:17:16.908Z,1538687836.908 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-10-04T21:17:17.311Z,1538687837.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:17:17.311Z,1538687837.311 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:17:17.311Z,1538687837.311 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:17:17.312Z,1538687837.312 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:17:17.312Z,1538687837.312 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:17:17.313Z,1538687837.313 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:18:47.943Z,1538687927.943 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T21:18:47.944Z,1538687927.944 [NAL9602] Data Fault, FailCount= 3
2018-10-04T21:18:47.944Z,1538687927.944 [NAL9602](ERROR): Data Fault
2018-10-04T21:18:48.016Z,1538687928.016 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T21:18:48.343Z,1538687928.343 [NAL9602](INFO): Powering down
2018-10-04T21:18:49.208Z,1538687929.208 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T21:18:49.208Z,1538687929.208 [NAL9602] No Fault, FailCount= 3
2018-10-04T21:19:18.358Z,1538687958.358 [NAL9602](INFO): Powering up NAL9602
2018-10-04T21:19:29.239Z,1538687969.239 [NAL9602](INFO): NAL9602 initialized
2018-10-04T21:20:17.382Z,1538688017.382 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:20:17.382Z,1538688017.382 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-10-04T21:20:17.382Z,1538688017.382 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:20:17.384Z,1538688017.384 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:20:17.384Z,1538688017.384 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-10-04T21:20:17.384Z,1538688017.384 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:20:17.414Z,1538688017.414 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:20:17.414Z,1538688017.414 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:20:17.810Z,1538688017.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:20:17.810Z,1538688017.810 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-10-04T21:20:17.811Z,1538688017.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:20:17.811Z,1538688017.811 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-10-04T21:20:18.188Z,1538688018.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:20:18.188Z,1538688018.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:20:18.189Z,1538688018.189 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:20:18.193Z,1538688018.193 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:20:18.194Z,1538688018.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:20:18.194Z,1538688018.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:20:46.693Z,1538688046.693 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T21:20:46.693Z,1538688046.693 [Default:CheckIn:C.Wait] Stopped
2018-10-04T21:20:46.693Z,1538688046.693 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T21:20:46.693Z,1538688046.693 [Default:CheckIn:D] Running Loop=1
2018-10-04T21:20:47.092Z,1538688047.092 [Default:CheckIn:D] Stopped
2018-10-04T21:20:47.092Z,1538688047.092 [Default:CheckIn:E] Running Loop=1
2018-10-04T21:20:47.498Z,1538688047.498 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1024.322070 min 
2018-10-04T21:20:47.498Z,1538688047.498 [Default:CheckIn:E] Stopped
2018-10-04T21:20:47.498Z,1538688047.499 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T21:20:47.499Z,1538688047.499 [Default:CheckIn] Stopped
2018-10-04T21:20:47.499Z,1538688047.499 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T21:20:47.499Z,1538688047.499 [Default:CheckIn](INFO): Running loop #100
2018-10-04T21:20:47.499Z,1538688047.499 [Default:CheckIn] Running Loop=100
2018-10-04T21:20:47.499Z,1538688047.499 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T21:20:47.499Z,1538688047.499 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T21:23:18.330Z,1538688198.330 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:23:18.331Z,1538688198.331 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-10-04T21:23:18.331Z,1538688198.331 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:23:18.332Z,1538688198.332 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:23:18.333Z,1538688198.333 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-10-04T21:23:18.333Z,1538688198.333 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:23:18.356Z,1538688198.356 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:23:18.356Z,1538688198.356 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:23:18.731Z,1538688198.731 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:23:18.731Z,1538688198.731 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-10-04T21:23:18.732Z,1538688198.732 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:23:18.732Z,1538688198.732 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-10-04T21:23:19.121Z,1538688199.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:23:19.122Z,1538688199.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:23:19.122Z,1538688199.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:23:19.122Z,1538688199.122 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:23:19.123Z,1538688199.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:23:19.123Z,1538688199.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:25:49.927Z,1538688349.927 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T21:20:47.5Z
2018-10-04T21:25:49.927Z,1538688349.927 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T21:25:49.927Z,1538688349.927 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T21:25:54.900Z,1538688354.900 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0301.lzma
2018-10-04T21:25:55.673Z,1538688355.673 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0301.lzma.bak
2018-10-04T21:25:55.673Z,1538688355.673 [DataOverHttps](INFO): SBD MOMSN=8611165
2018-10-04T21:26:04.884Z,1538688364.884 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0302.lzma
2018-10-04T21:26:05.664Z,1538688365.664 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0302.lzma.bak
2018-10-04T21:26:05.665Z,1538688365.665 [DataOverHttps](INFO): SBD MOMSN=8611167
2018-10-04T21:26:06.629Z,1538688366.629 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T21:26:06.629Z,1538688366.629 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T21:26:06.629Z,1538688366.629 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T21:26:19.302Z,1538688379.302 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:26:19.302Z,1538688379.302 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-10-04T21:26:19.302Z,1538688379.302 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:26:19.304Z,1538688379.304 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:26:19.304Z,1538688379.304 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-10-04T21:26:19.305Z,1538688379.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:26:19.347Z,1538688379.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:26:19.347Z,1538688379.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:26:19.691Z,1538688379.691 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:26:19.691Z,1538688379.691 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-10-04T21:26:19.692Z,1538688379.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:26:19.692Z,1538688379.692 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-10-04T21:26:20.058Z,1538688380.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:26:20.059Z,1538688380.059 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:26:20.059Z,1538688380.059 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:26:20.060Z,1538688380.060 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:26:20.060Z,1538688380.060 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:26:20.061Z,1538688380.061 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:29:20.146Z,1538688560.146 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:29:20.146Z,1538688560.146 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-10-04T21:29:20.147Z,1538688560.147 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:29:20.148Z,1538688560.148 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:29:20.149Z,1538688560.149 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-10-04T21:29:20.153Z,1538688560.153 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:29:20.178Z,1538688560.178 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:29:20.179Z,1538688560.179 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:29:20.555Z,1538688560.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:29:20.555Z,1538688560.555 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-10-04T21:29:20.555Z,1538688560.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:29:20.555Z,1538688560.555 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-10-04T21:29:20.956Z,1538688560.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:29:20.956Z,1538688560.956 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:29:20.956Z,1538688560.956 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:29:20.957Z,1538688560.957 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:29:20.957Z,1538688560.957 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:29:20.958Z,1538688560.958 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:29:32.495Z,1538688572.495 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T21:29:32.495Z,1538688572.495 [NAL9602] Data Fault, FailCount= 4
2018-10-04T21:29:32.495Z,1538688572.495 [NAL9602](ERROR): Data Fault
2018-10-04T21:29:32.552Z,1538688572.552 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T21:29:32.904Z,1538688572.904 [NAL9602](INFO): Powering down
2018-10-04T21:29:33.760Z,1538688573.760 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T21:29:33.760Z,1538688573.760 [NAL9602] No Fault, FailCount= 4
2018-10-04T21:30:02.951Z,1538688602.951 [NAL9602](INFO): Powering up NAL9602
2018-10-04T21:30:13.755Z,1538688613.755 [NAL9602](INFO): NAL9602 initialized
2018-10-04T21:31:06.789Z,1538688666.789 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T21:31:06.789Z,1538688666.789 [Default:CheckIn:C.Wait] Stopped
2018-10-04T21:31:06.789Z,1538688666.789 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T21:31:06.790Z,1538688666.790 [Default:CheckIn:D] Running Loop=1
2018-10-04T21:31:07.185Z,1538688667.185 [Default:CheckIn:D] Stopped
2018-10-04T21:31:07.186Z,1538688667.186 [Default:CheckIn:E] Running Loop=1
2018-10-04T21:31:07.576Z,1538688667.576 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1034.656901 min 
2018-10-04T21:31:07.581Z,1538688667.581 [Default:CheckIn:E] Stopped
2018-10-04T21:31:07.581Z,1538688667.581 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T21:31:07.581Z,1538688667.581 [Default:CheckIn] Stopped
2018-10-04T21:31:07.581Z,1538688667.581 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T21:31:07.582Z,1538688667.582 [Default:CheckIn](INFO): Running loop #101
2018-10-04T21:31:07.582Z,1538688667.582 [Default:CheckIn] Running Loop=101
2018-10-04T21:31:07.582Z,1538688667.582 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T21:31:07.582Z,1538688667.582 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T21:32:21.087Z,1538688741.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:32:21.087Z,1538688741.087 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-10-04T21:32:21.087Z,1538688741.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:32:21.093Z,1538688741.093 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:32:21.093Z,1538688741.093 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-10-04T21:32:21.093Z,1538688741.093 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:32:21.119Z,1538688741.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:32:21.119Z,1538688741.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:32:21.487Z,1538688741.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:32:21.487Z,1538688741.487 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-10-04T21:32:21.487Z,1538688741.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:32:21.487Z,1538688741.487 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-10-04T21:32:21.909Z,1538688741.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:32:21.909Z,1538688741.909 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:32:21.910Z,1538688741.910 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:32:21.910Z,1538688741.910 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:32:21.911Z,1538688741.911 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:32:21.911Z,1538688741.911 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:32:39.163Z,1538688759.164 [RDI_Pathfinder](ERROR): Failed to parse:
:BE,-32768,-32768,-32768,V
2018-10-04T21:35:21.991Z,1538688921.991 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:35:21.991Z,1538688921.991 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-10-04T21:35:21.991Z,1538688921.991 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:35:21.997Z,1538688921.997 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:35:21.997Z,1538688921.997 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-10-04T21:35:21.997Z,1538688921.997 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:35:22.022Z,1538688922.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:35:22.023Z,1538688922.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:35:22.398Z,1538688922.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:35:22.398Z,1538688922.398 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-10-04T21:35:22.399Z,1538688922.399 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:35:22.399Z,1538688922.399 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-10-04T21:35:22.790Z,1538688922.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:35:22.790Z,1538688922.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:35:22.790Z,1538688922.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:35:22.791Z,1538688922.791 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:35:22.791Z,1538688922.791 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:35:22.792Z,1538688922.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:36:09.706Z,1538688969.706 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T21:31:07.6Z
2018-10-04T21:36:09.706Z,1538688969.706 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T21:36:09.707Z,1538688969.707 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T21:36:10.393Z,1538688970.393 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0304.lzma
2018-10-04T21:36:10.933Z,1538688970.933 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0304.lzma.bak
2018-10-04T21:36:10.933Z,1538688970.933 [DataOverHttps](INFO): SBD MOMSN=8611171
2018-10-04T21:36:20.168Z,1538688980.168 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0305.lzma
2018-10-04T21:36:20.944Z,1538688980.944 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0305.lzma.bak
2018-10-04T21:36:20.945Z,1538688980.945 [DataOverHttps](INFO): SBD MOMSN=8611173
2018-10-04T21:36:22.203Z,1538688982.203 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T21:36:22.203Z,1538688982.203 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T21:36:22.203Z,1538688982.203 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T21:38:22.819Z,1538689102.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:38:22.819Z,1538689102.819 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-10-04T21:38:22.819Z,1538689102.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:38:22.825Z,1538689102.825 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:38:22.825Z,1538689102.825 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-10-04T21:38:22.825Z,1538689102.825 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:38:22.845Z,1538689102.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:38:22.849Z,1538689102.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:38:23.264Z,1538689103.264 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:38:23.264Z,1538689103.264 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-10-04T21:38:23.264Z,1538689103.264 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:38:23.264Z,1538689103.264 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-10-04T21:38:23.618Z,1538689103.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:38:23.618Z,1538689103.618 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:38:23.619Z,1538689103.619 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:38:23.619Z,1538689103.619 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:38:23.619Z,1538689103.619 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:38:23.620Z,1538689103.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:40:17.403Z,1538689217.403 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T21:40:17.403Z,1538689217.403 [NAL9602] Data Fault, FailCount= 5
2018-10-04T21:40:17.403Z,1538689217.403 [NAL9602](ERROR): Data Fault
2018-10-04T21:40:17.502Z,1538689217.502 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T21:40:17.503Z,1538689217.503 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T21:40:17.803Z,1538689217.803 [NAL9602](INFO): Powering down
2018-10-04T21:40:17.888Z,1538689217.888 [CBIT](INFO): Critical error at 20181004T214017
2018-10-04T21:41:22.423Z,1538689282.423 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T21:41:22.423Z,1538689282.423 [Default:CheckIn:C.Wait] Stopped
2018-10-04T21:41:22.423Z,1538689282.423 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T21:41:22.423Z,1538689282.423 [Default:CheckIn:D] Running Loop=1
2018-10-04T21:41:22.812Z,1538689282.812 [Default:CheckIn:D] Stopped
2018-10-04T21:41:22.812Z,1538689282.812 [Default:CheckIn:E] Running Loop=1
2018-10-04T21:41:23.253Z,1538689283.253 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1044.917383 min 
2018-10-04T21:41:23.257Z,1538689283.257 [Default:CheckIn:E] Stopped
2018-10-04T21:41:23.257Z,1538689283.257 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T21:41:23.258Z,1538689283.258 [Default:CheckIn] Stopped
2018-10-04T21:41:23.258Z,1538689283.258 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T21:41:23.258Z,1538689283.258 [Default:CheckIn](INFO): Running loop #102
2018-10-04T21:41:23.258Z,1538689283.258 [Default:CheckIn] Running Loop=102
2018-10-04T21:41:23.258Z,1538689283.258 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T21:41:23.258Z,1538689283.258 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T21:41:24.015Z,1538689284.015 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:41:24.015Z,1538689284.015 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-10-04T21:41:24.015Z,1538689284.015 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:41:24.017Z,1538689284.017 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:41:24.017Z,1538689284.017 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-10-04T21:41:24.017Z,1538689284.017 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:41:24.030Z,1538689284.030 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:41:24.030Z,1538689284.030 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:41:24.458Z,1538689284.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:41:24.459Z,1538689284.459 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-10-04T21:41:24.459Z,1538689284.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:41:24.459Z,1538689284.459 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-10-04T21:41:24.800Z,1538689284.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:41:24.800Z,1538689284.800 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:41:24.801Z,1538689284.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:41:24.805Z,1538689284.805 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:41:24.806Z,1538689284.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:41:24.806Z,1538689284.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:42:18.283Z,1538689338.283 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T21:42:18.283Z,1538689338.283 [NAL9602] No Fault, FailCount= 5
2018-10-04T21:42:18.363Z,1538689338.363 [NAL9602](INFO): Powering up NAL9602
2018-10-04T21:42:29.503Z,1538689349.503 [NAL9602](INFO): NAL9602 initialized
2018-10-04T21:43:01.258Z,1538689381.258 [RDI_Pathfinder](ERROR): DVL BIT error. See manual. Result code: -32768
2018-10-04T21:43:01.259Z,1538689381.259 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-04T21:44:14.323Z,1538689454.323 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T21:44:14.323Z,1538689454.323 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,32768,V
2018-10-04T21:44:25.145Z,1538689465.145 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:44:25.145Z,1538689465.145 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-10-04T21:44:25.145Z,1538689465.145 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:44:25.147Z,1538689465.147 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:44:25.147Z,1538689465.147 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-10-04T21:44:25.147Z,1538689465.147 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:44:25.177Z,1538689465.177 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:44:25.177Z,1538689465.177 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:44:25.551Z,1538689465.551 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:44:25.551Z,1538689465.551 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-10-04T21:44:25.552Z,1538689465.552 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:44:25.552Z,1538689465.552 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-10-04T21:44:25.926Z,1538689465.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:44:25.926Z,1538689465.926 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:44:25.927Z,1538689465.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:44:25.927Z,1538689465.927 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:44:25.927Z,1538689465.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:44:25.928Z,1538689465.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:46:26.436Z,1538689586.436 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T21:41:23.3Z
2018-10-04T21:46:26.436Z,1538689586.436 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T21:46:26.436Z,1538689586.436 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T21:46:27.190Z,1538689587.190 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0307.lzma
2018-10-04T21:46:28.113Z,1538689588.113 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0307.lzma.bak
2018-10-04T21:46:28.114Z,1538689588.114 [DataOverHttps](INFO): SBD MOMSN=8611177
2018-10-04T21:46:40.032Z,1538689600.032 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0308.lzma
2018-10-04T21:46:40.832Z,1538689600.832 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0308.lzma.bak
2018-10-04T21:46:40.833Z,1538689600.833 [DataOverHttps](INFO): SBD MOMSN=8611180
2018-10-04T21:46:41.759Z,1538689601.759 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T21:46:41.759Z,1538689601.759 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T21:46:41.760Z,1538689601.760 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T21:46:46.305Z,1538689606.305 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T21:47:26.047Z,1538689646.047 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:47:26.048Z,1538689646.048 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-10-04T21:47:26.048Z,1538689646.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:47:26.050Z,1538689646.050 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:47:26.050Z,1538689646.050 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-10-04T21:47:26.050Z,1538689646.050 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:47:26.076Z,1538689646.076 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:47:26.076Z,1538689646.076 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:47:26.495Z,1538689646.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:47:26.495Z,1538689646.495 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-10-04T21:47:26.495Z,1538689646.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:47:26.496Z,1538689646.496 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-10-04T21:47:26.854Z,1538689646.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:47:26.855Z,1538689646.855 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:47:26.855Z,1538689646.855 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:47:26.856Z,1538689646.856 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:47:26.856Z,1538689646.856 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:47:26.856Z,1538689646.856 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:50:27.250Z,1538689827.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:50:27.250Z,1538689827.250 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-10-04T21:50:27.250Z,1538689827.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:50:27.252Z,1538689827.252 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:50:27.252Z,1538689827.252 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-10-04T21:50:27.252Z,1538689827.252 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:50:27.277Z,1538689827.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:50:27.277Z,1538689827.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:50:27.654Z,1538689827.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:50:27.654Z,1538689827.654 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-10-04T21:50:27.654Z,1538689827.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:50:27.654Z,1538689827.654 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-10-04T21:50:28.043Z,1538689828.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:50:28.044Z,1538689828.044 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:50:28.044Z,1538689828.044 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:50:28.044Z,1538689828.044 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:50:28.050Z,1538689828.050 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:50:28.050Z,1538689828.050 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:51:42.012Z,1538689902.012 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T21:51:42.017Z,1538689902.017 [Default:CheckIn:C.Wait] Stopped
2018-10-04T21:51:42.017Z,1538689902.017 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T21:51:42.017Z,1538689902.017 [Default:CheckIn:D] Running Loop=1
2018-10-04T21:51:42.380Z,1538689902.380 [Default:CheckIn:D] Stopped
2018-10-04T21:51:42.380Z,1538689902.380 [Default:CheckIn:E] Running Loop=1
2018-10-04T21:51:42.804Z,1538689902.804 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1055.243555 min 
2018-10-04T21:51:42.804Z,1538689902.804 [Default:CheckIn:E] Stopped
2018-10-04T21:51:42.804Z,1538689902.804 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T21:51:42.804Z,1538689902.804 [Default:CheckIn] Stopped
2018-10-04T21:51:42.804Z,1538689902.804 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T21:51:42.805Z,1538689902.805 [Default:CheckIn](INFO): Running loop #103
2018-10-04T21:51:42.805Z,1538689902.805 [Default:CheckIn] Running Loop=103
2018-10-04T21:51:42.805Z,1538689902.805 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T21:51:42.805Z,1538689902.805 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T21:52:32.067Z,1538689952.067 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T21:52:32.067Z,1538689952.067 [NAL9602] Data Fault, FailCount= 1
2018-10-04T21:52:32.067Z,1538689952.067 [NAL9602](ERROR): Data Fault
2018-10-04T21:52:32.148Z,1538689952.148 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T21:52:32.467Z,1538689952.467 [NAL9602](INFO): Powering down
2018-10-04T21:52:33.326Z,1538689953.326 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T21:52:33.326Z,1538689953.326 [NAL9602] No Fault, FailCount= 1
2018-10-04T21:53:02.591Z,1538689982.591 [NAL9602](INFO): Powering up NAL9602
2018-10-04T21:53:13.912Z,1538689993.912 [NAL9602](INFO): NAL9602 initialized
2018-10-04T21:53:28.327Z,1538690008.327 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:53:28.327Z,1538690008.327 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-10-04T21:53:28.327Z,1538690008.327 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:53:28.330Z,1538690008.330 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:53:28.330Z,1538690008.330 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-10-04T21:53:28.330Z,1538690008.330 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:53:28.343Z,1538690008.343 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:53:28.343Z,1538690008.343 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:53:28.751Z,1538690008.751 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:53:28.751Z,1538690008.751 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-10-04T21:53:28.752Z,1538690008.752 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:53:28.752Z,1538690008.752 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-10-04T21:53:29.147Z,1538690009.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:53:29.148Z,1538690009.148 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:53:29.148Z,1538690009.148 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:53:29.153Z,1538690009.153 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:53:29.153Z,1538690009.153 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:53:29.154Z,1538690009.154 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:55:28.237Z,1538690128.237 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T21:55:28.237Z,1538690128.237 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100415002, -0.1,   0.0,1448.9,  0
2018-10-04T21:56:19.253Z,1538690179.253 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T21:56:19.253Z,1538690179.253 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100415011579,35.0, -0.1,   0.0,14
2018-10-04T21:56:29.263Z,1538690189.263 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:56:29.263Z,1538690189.263 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-10-04T21:56:29.263Z,1538690189.263 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:56:29.278Z,1538690189.278 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:56:29.278Z,1538690189.278 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-10-04T21:56:29.278Z,1538690189.278 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:56:29.316Z,1538690189.316 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:56:29.316Z,1538690189.316 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:56:29.706Z,1538690189.706 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:56:29.706Z,1538690189.706 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-10-04T21:56:29.707Z,1538690189.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:56:29.707Z,1538690189.707 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-10-04T21:56:30.069Z,1538690190.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:56:30.073Z,1538690190.073 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:56:30.074Z,1538690190.074 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:56:30.074Z,1538690190.074 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:56:30.075Z,1538690190.075 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:56:30.075Z,1538690190.075 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:56:45.266Z,1538690205.266 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T21:51:42.8Z
2018-10-04T21:56:45.266Z,1538690205.266 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T21:56:45.266Z,1538690205.266 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T21:56:50.221Z,1538690210.221 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0310.lzma
2018-10-04T21:56:50.989Z,1538690210.989 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0310.lzma.bak
2018-10-04T21:56:50.989Z,1538690210.989 [DataOverHttps](INFO): SBD MOMSN=8611184
2018-10-04T21:57:00.408Z,1538690220.408 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0311.lzma
2018-10-04T21:57:01.205Z,1538690221.205 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0311.lzma.bak
2018-10-04T21:57:01.205Z,1538690221.205 [DataOverHttps](INFO): SBD MOMSN=8611186
2018-10-04T21:57:02.165Z,1538690222.165 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T21:57:02.166Z,1538690222.166 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T21:57:02.166Z,1538690222.166 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T21:58:25.410Z,1538690305.410 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T21:58:25.410Z,1538690305.410 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,
2018-10-04T21:59:30.431Z,1538690370.431 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:59:30.431Z,1538690370.431 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-10-04T21:59:30.431Z,1538690370.431 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T21:59:30.437Z,1538690370.437 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T21:59:30.437Z,1538690370.437 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-10-04T21:59:30.437Z,1538690370.437 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T21:59:30.462Z,1538690370.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T21:59:30.462Z,1538690370.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T21:59:30.871Z,1538690370.871 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T21:59:30.872Z,1538690370.872 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-10-04T21:59:30.872Z,1538690370.872 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T21:59:30.872Z,1538690370.872 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-10-04T21:59:31.242Z,1538690371.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T21:59:31.242Z,1538690371.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:59:31.243Z,1538690371.243 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T21:59:31.243Z,1538690371.243 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T21:59:31.244Z,1538690371.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T21:59:31.244Z,1538690371.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:02:02.481Z,1538690522.481 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T22:02:02.481Z,1538690522.481 [Default:CheckIn:C.Wait] Stopped
2018-10-04T22:02:02.481Z,1538690522.481 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T22:02:02.482Z,1538690522.482 [Default:CheckIn:D] Running Loop=1
2018-10-04T22:02:02.906Z,1538690522.906 [Default:CheckIn:D] Stopped
2018-10-04T22:02:02.906Z,1538690522.906 [Default:CheckIn:E] Running Loop=1
2018-10-04T22:02:03.267Z,1538690523.267 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1065.585612 min 
2018-10-04T22:02:03.268Z,1538690523.268 [Default:CheckIn:E] Stopped
2018-10-04T22:02:03.268Z,1538690523.268 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T22:02:03.268Z,1538690523.268 [Default:CheckIn] Stopped
2018-10-04T22:02:03.268Z,1538690523.268 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T22:02:03.268Z,1538690523.268 [Default:CheckIn](INFO): Running loop #104
2018-10-04T22:02:03.268Z,1538690523.268 [Default:CheckIn] Running Loop=104
2018-10-04T22:02:03.269Z,1538690523.269 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T22:02:03.269Z,1538690523.269 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T22:02:31.350Z,1538690551.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:02:31.350Z,1538690551.350 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-10-04T22:02:31.350Z,1538690551.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:02:31.352Z,1538690551.352 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:02:31.352Z,1538690551.352 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-10-04T22:02:31.352Z,1538690551.352 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:02:31.382Z,1538690551.382 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:02:31.382Z,1538690551.382 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:02:31.792Z,1538690551.792 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:02:31.792Z,1538690551.792 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-10-04T22:02:31.792Z,1538690551.792 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:02:31.792Z,1538690551.792 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-10-04T22:02:32.178Z,1538690552.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:02:32.179Z,1538690552.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:02:32.179Z,1538690552.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:02:32.180Z,1538690552.180 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:02:32.180Z,1538690552.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:02:32.180Z,1538690552.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:03:15.403Z,1538690595.403 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T22:03:15.403Z,1538690595.403 [NAL9602] Data Fault, FailCount= 2
2018-10-04T22:03:15.403Z,1538690595.403 [NAL9602](ERROR): Data Fault
2018-10-04T22:03:15.469Z,1538690595.469 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T22:03:15.803Z,1538690595.803 [NAL9602](INFO): Powering down
2018-10-04T22:03:16.668Z,1538690596.668 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T22:03:16.669Z,1538690596.669 [NAL9602] No Fault, FailCount= 2
2018-10-04T22:03:45.875Z,1538690625.875 [NAL9602](INFO): Powering up NAL9602
2018-10-04T22:03:56.675Z,1538690636.675 [NAL9602](INFO): NAL9602 initialized
2018-10-04T22:05:32.239Z,1538690732.239 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:05:32.239Z,1538690732.239 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-10-04T22:05:32.239Z,1538690732.239 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:05:32.245Z,1538690732.245 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:05:32.245Z,1538690732.245 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-10-04T22:05:32.245Z,1538690732.245 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:05:32.266Z,1538690732.266 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:05:32.267Z,1538690732.267 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:05:32.646Z,1538690732.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:05:32.646Z,1538690732.646 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-10-04T22:05:32.647Z,1538690732.647 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:05:32.647Z,1538690732.647 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-10-04T22:05:33.031Z,1538690733.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:05:33.031Z,1538690733.031 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:05:33.032Z,1538690733.032 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:05:33.032Z,1538690733.032 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:05:33.033Z,1538690733.033 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:05:33.033Z,1538690733.033 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:05:56.279Z,1538690756.279 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T22:07:05.604Z,1538690825.604 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T22:02:03.3Z
2018-10-04T22:07:05.604Z,1538690825.604 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T22:07:05.604Z,1538690825.604 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T22:07:10.538Z,1538690830.538 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0313.lzma
2018-10-04T22:07:11.314Z,1538690831.314 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0313.lzma.bak
2018-10-04T22:07:11.314Z,1538690831.314 [DataOverHttps](INFO): SBD MOMSN=8611190
2018-10-04T22:07:20.653Z,1538690840.653 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0314.lzma
2018-10-04T22:07:21.425Z,1538690841.425 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0314.lzma.bak
2018-10-04T22:07:21.425Z,1538690841.425 [DataOverHttps](INFO): SBD MOMSN=8611192
2018-10-04T22:07:22.399Z,1538690842.399 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T22:07:22.399Z,1538690842.399 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T22:07:22.399Z,1538690842.399 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T22:08:33.186Z,1538690913.186 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:08:33.187Z,1538690913.187 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-10-04T22:08:33.187Z,1538690913.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:08:33.188Z,1538690913.188 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:08:33.189Z,1538690913.189 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-10-04T22:08:33.189Z,1538690913.189 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:08:33.218Z,1538690913.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:08:33.219Z,1538690913.219 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:08:36.385Z,1538690916.385 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:08:36.385Z,1538690916.385 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-10-04T22:08:36.386Z,1538690916.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:08:36.386Z,1538690916.386 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-10-04T22:08:36.510Z,1538690916.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:08:36.510Z,1538690916.510 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:08:36.511Z,1538690916.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:08:36.511Z,1538690916.511 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:08:36.511Z,1538690916.511 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:08:36.512Z,1538690916.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:11:36.655Z,1538691096.655 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:11:36.655Z,1538691096.655 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-10-04T22:11:36.655Z,1538691096.655 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:11:36.666Z,1538691096.666 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:11:36.666Z,1538691096.666 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-10-04T22:11:36.666Z,1538691096.667 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:11:36.721Z,1538691096.721 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:11:36.722Z,1538691096.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:11:37.086Z,1538691097.086 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:11:37.086Z,1538691097.086 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-10-04T22:11:37.087Z,1538691097.087 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:11:37.087Z,1538691097.087 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-10-04T22:11:37.450Z,1538691097.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:11:37.450Z,1538691097.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:11:37.450Z,1538691097.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:11:37.451Z,1538691097.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:11:37.451Z,1538691097.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:11:37.452Z,1538691097.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:12:22.758Z,1538691142.758 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T22:12:22.758Z,1538691142.758 [Default:CheckIn:C.Wait] Stopped
2018-10-04T22:12:22.758Z,1538691142.758 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T22:12:22.758Z,1538691142.758 [Default:CheckIn:D] Running Loop=1
2018-10-04T22:12:23.189Z,1538691143.189 [Default:CheckIn:D] Stopped
2018-10-04T22:12:23.189Z,1538691143.189 [Default:CheckIn:E] Running Loop=1
2018-10-04T22:12:23.565Z,1538691143.565 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1075.923633 min 
2018-10-04T22:12:23.566Z,1538691143.566 [Default:CheckIn:E] Stopped
2018-10-04T22:12:23.566Z,1538691143.566 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T22:12:23.566Z,1538691143.566 [Default:CheckIn] Stopped
2018-10-04T22:12:23.566Z,1538691143.566 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T22:12:23.566Z,1538691143.566 [Default:CheckIn](INFO): Running loop #105
2018-10-04T22:12:23.566Z,1538691143.566 [Default:CheckIn] Running Loop=105
2018-10-04T22:12:23.566Z,1538691143.566 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T22:12:23.567Z,1538691143.567 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T22:13:58.784Z,1538691238.784 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T22:13:58.784Z,1538691238.784 [NAL9602] Data Fault, FailCount= 3
2018-10-04T22:13:58.784Z,1538691238.784 [NAL9602](ERROR): Data Fault
2018-10-04T22:13:58.987Z,1538691238.987 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T22:13:59.177Z,1538691239.177 [NAL9602](INFO): Powering down
2018-10-04T22:14:00.076Z,1538691240.076 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T22:14:00.076Z,1538691240.076 [NAL9602] No Fault, FailCount= 3
2018-10-04T22:14:19.645Z,1538691259.645 [CBIT](IMPORTANT): Beginning ground fault scan
2018-10-04T22:14:29.428Z,1538691269.428 [NAL9602](INFO): Powering up NAL9602
2018-10-04T22:14:33.094Z,1538691273.094 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.002005
CHAN A1 (24V): 0.003331
CHAN A2 (12V): -0.007339
CHAN A3 (5V): -0.002083
CHAN B0 (3.3V): 0.000299
CHAN B1 (3.15aV): -0.000020
CHAN B2 (3.15bV): 0.000034
CHAN B3 (GND): 0.002230
OPEN: 0.004808
Full Scale Calc: 4.765 mA, -1.589 mA
2018-10-04T22:14:37.464Z,1538691277.464 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:14:37.464Z,1538691277.464 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-10-04T22:14:37.464Z,1538691277.464 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:14:37.466Z,1538691277.466 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:14:37.466Z,1538691277.466 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-10-04T22:14:37.466Z,1538691277.466 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:14:37.492Z,1538691277.492 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:14:37.492Z,1538691277.492 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:14:37.893Z,1538691277.893 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:14:37.893Z,1538691277.893 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-10-04T22:14:37.894Z,1538691277.894 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:14:37.894Z,1538691277.894 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-10-04T22:14:38.254Z,1538691278.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:14:38.254Z,1538691278.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:14:38.255Z,1538691278.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:14:38.255Z,1538691278.255 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:14:38.256Z,1538691278.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:14:38.256Z,1538691278.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:14:40.628Z,1538691280.628 [NAL9602](INFO): NAL9602 initialized
2018-10-04T22:15:05.207Z,1538691305.207 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T22:17:25.337Z,1538691445.337 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T22:12:23.6Z
2018-10-04T22:17:25.337Z,1538691445.337 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T22:17:25.337Z,1538691445.337 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T22:17:30.441Z,1538691450.441 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0316.lzma
2018-10-04T22:17:31.217Z,1538691451.217 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0316.lzma.bak
2018-10-04T22:17:31.218Z,1538691451.218 [DataOverHttps](INFO): SBD MOMSN=8611196
2018-10-04T22:17:40.962Z,1538691460.962 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:17:40.962Z,1538691460.962 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-10-04T22:17:40.962Z,1538691460.962 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:17:40.964Z,1538691460.964 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:17:40.964Z,1538691460.964 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-10-04T22:17:40.964Z,1538691460.964 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:17:40.998Z,1538691460.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:17:40.998Z,1538691460.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:17:41.042Z,1538691461.042 [DataOverHttps](INFO): Sending 327 bytes from file Logs/20181004T041305/Express0317.lzma
2018-10-04T22:17:41.152Z,1538691461.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:17:41.152Z,1538691461.152 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-10-04T22:17:41.152Z,1538691461.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:17:41.152Z,1538691461.152 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-10-04T22:17:41.471Z,1538691461.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:17:41.471Z,1538691461.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:17:41.472Z,1538691461.472 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:17:41.472Z,1538691461.472 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:17:41.473Z,1538691461.473 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:17:41.473Z,1538691461.473 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:17:41.822Z,1538691461.822 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0317.lzma.bak
2018-10-04T22:17:41.823Z,1538691461.823 [DataOverHttps](INFO): SBD MOMSN=8611198
2018-10-04T22:17:41.878Z,1538691461.878 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,21881.57
2018-10-04T22:17:42.739Z,1538691462.739 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T22:17:42.739Z,1538691462.739 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T22:17:42.739Z,1538691462.739 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T22:19:08.354Z,1538691548.354 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T22:20:42.599Z,1538691642.599 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:20:42.599Z,1538691642.599 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-10-04T22:20:42.599Z,1538691642.599 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:20:42.601Z,1538691642.601 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:20:42.601Z,1538691642.601 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-10-04T22:20:42.601Z,1538691642.601 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:20:42.614Z,1538691642.614 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:20:42.614Z,1538691642.614 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:20:42.751Z,1538691642.751 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:20:42.751Z,1538691642.751 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-10-04T22:20:42.752Z,1538691642.752 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:20:42.752Z,1538691642.752 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-10-04T22:20:43.078Z,1538691643.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:20:43.078Z,1538691643.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:20:43.078Z,1538691643.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:20:43.079Z,1538691643.079 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:20:43.079Z,1538691643.079 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:20:43.080Z,1538691643.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:22:42.952Z,1538691762.952 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T22:22:42.957Z,1538691762.957 [Default:CheckIn:C.Wait] Stopped
2018-10-04T22:22:42.957Z,1538691762.957 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T22:22:42.957Z,1538691762.957 [Default:CheckIn:D] Running Loop=1
2018-10-04T22:22:43.357Z,1538691763.357 [Default:CheckIn:D] Stopped
2018-10-04T22:22:43.357Z,1538691763.357 [Default:CheckIn:E] Running Loop=1
2018-10-04T22:22:43.753Z,1538691763.753 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1086.259766 min 
2018-10-04T22:22:43.753Z,1538691763.753 [Default:CheckIn:E] Stopped
2018-10-04T22:22:43.753Z,1538691763.753 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T22:22:43.754Z,1538691763.754 [Default:CheckIn] Stopped
2018-10-04T22:22:43.754Z,1538691763.754 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T22:22:43.754Z,1538691763.754 [Default:CheckIn](INFO): Running loop #106
2018-10-04T22:22:43.754Z,1538691763.754 [Default:CheckIn] Running Loop=106
2018-10-04T22:22:43.754Z,1538691763.754 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T22:22:43.754Z,1538691763.754 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T22:23:43.143Z,1538691823.143 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:23:43.143Z,1538691823.143 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-10-04T22:23:43.143Z,1538691823.143 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:23:43.145Z,1538691823.145 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:23:43.145Z,1538691823.145 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-10-04T22:23:43.145Z,1538691823.145 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:23:43.158Z,1538691823.158 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:23:43.158Z,1538691823.158 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:23:43.539Z,1538691823.539 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:23:43.539Z,1538691823.539 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-10-04T22:23:43.540Z,1538691823.540 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:23:43.540Z,1538691823.540 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-10-04T22:23:43.936Z,1538691823.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:23:43.937Z,1538691823.937 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:23:43.937Z,1538691823.937 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:23:43.938Z,1538691823.938 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:23:43.938Z,1538691823.938 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:23:43.938Z,1538691823.938 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:24:41.576Z,1538691881.576 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T22:24:41.576Z,1538691881.576 [NAL9602] Data Fault, FailCount= 4
2018-10-04T22:24:41.576Z,1538691881.576 [NAL9602](ERROR): Data Fault
2018-10-04T22:24:41.635Z,1538691881.635 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T22:24:41.967Z,1538691881.967 [NAL9602](INFO): Powering down
2018-10-04T22:24:42.857Z,1538691882.857 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T22:24:42.857Z,1538691882.857 [NAL9602] No Fault, FailCount= 4
2018-10-04T22:25:12.069Z,1538691912.069 [NAL9602](INFO): Powering up NAL9602
2018-10-04T22:25:25.347Z,1538691925.347 [NAL9602](INFO): NAL9602 initialized
2018-10-04T22:26:43.949Z,1538692003.949 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:26:43.950Z,1538692003.950 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-10-04T22:26:43.950Z,1538692003.950 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:26:43.951Z,1538692003.951 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:26:43.952Z,1538692003.952 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-10-04T22:26:43.952Z,1538692003.952 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:26:43.965Z,1538692003.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:26:43.965Z,1538692003.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:26:44.342Z,1538692004.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:26:44.342Z,1538692004.342 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-10-04T22:26:44.342Z,1538692004.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:26:44.343Z,1538692004.343 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-10-04T22:26:44.756Z,1538692004.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:26:44.757Z,1538692004.757 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:26:44.757Z,1538692004.757 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:26:44.758Z,1538692004.758 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:26:44.758Z,1538692004.758 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:26:44.759Z,1538692004.759 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:27:46.005Z,1538692066.005 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T22:22:43.8Z
2018-10-04T22:27:46.005Z,1538692066.005 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T22:27:46.005Z,1538692066.005 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T22:27:46.713Z,1538692066.713 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0319.lzma
2018-10-04T22:27:47.257Z,1538692067.257 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0319.lzma.bak
2018-10-04T22:27:47.257Z,1538692067.257 [DataOverHttps](INFO): SBD MOMSN=8611204
2018-10-04T22:27:56.461Z,1538692076.461 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0320.lzma
2018-10-04T22:27:57.245Z,1538692077.245 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0320.lzma.bak
2018-10-04T22:27:57.245Z,1538692077.245 [DataOverHttps](INFO): SBD MOMSN=8611206
2018-10-04T22:27:58.191Z,1538692078.191 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T22:27:58.191Z,1538692078.191 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T22:27:58.191Z,1538692078.191 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T22:29:47.482Z,1538692187.482 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:29:47.482Z,1538692187.482 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-10-04T22:29:47.482Z,1538692187.482 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:29:47.487Z,1538692187.487 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:29:47.487Z,1538692187.487 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-10-04T22:29:47.487Z,1538692187.487 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:29:47.513Z,1538692187.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:29:47.514Z,1538692187.514 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:29:47.626Z,1538692187.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:29:47.626Z,1538692187.626 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-10-04T22:29:47.627Z,1538692187.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:29:47.627Z,1538692187.627 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-10-04T22:29:47.990Z,1538692187.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:29:47.991Z,1538692187.991 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:29:47.991Z,1538692187.991 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:29:47.991Z,1538692187.991 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:29:47.992Z,1538692187.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:29:47.992Z,1538692187.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:32:45.135Z,1538692365.135 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T22:32:48.348Z,1538692368.348 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:32:48.348Z,1538692368.348 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-10-04T22:32:48.348Z,1538692368.348 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:32:48.350Z,1538692368.350 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:32:48.350Z,1538692368.350 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-10-04T22:32:48.350Z,1538692368.350 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:32:48.372Z,1538692368.372 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:32:48.372Z,1538692368.372 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:32:48.786Z,1538692368.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:32:48.787Z,1538692368.787 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-10-04T22:32:48.788Z,1538692368.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:32:48.788Z,1538692368.788 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-10-04T22:32:49.175Z,1538692369.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:32:49.175Z,1538692369.175 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:32:49.176Z,1538692369.176 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:32:49.176Z,1538692369.176 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:32:49.176Z,1538692369.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:32:49.177Z,1538692369.177 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:32:58.352Z,1538692378.352 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T22:32:58.357Z,1538692378.357 [Default:CheckIn:C.Wait] Stopped
2018-10-04T22:32:58.357Z,1538692378.357 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T22:32:58.357Z,1538692378.357 [Default:CheckIn:D] Running Loop=1
2018-10-04T22:32:58.769Z,1538692378.769 [Default:CheckIn:D] Stopped
2018-10-04T22:32:58.770Z,1538692378.770 [Default:CheckIn:E] Running Loop=1
2018-10-04T22:32:59.159Z,1538692379.159 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1096.516146 min 
2018-10-04T22:32:59.159Z,1538692379.159 [Default:CheckIn:E] Stopped
2018-10-04T22:32:59.159Z,1538692379.159 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T22:32:59.159Z,1538692379.159 [Default:CheckIn] Stopped
2018-10-04T22:32:59.160Z,1538692379.160 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T22:32:59.160Z,1538692379.160 [Default:CheckIn](INFO): Running loop #107
2018-10-04T22:32:59.160Z,1538692379.160 [Default:CheckIn] Running Loop=107
2018-10-04T22:32:59.160Z,1538692379.160 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T22:32:59.160Z,1538692379.160 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T22:33:57.825Z,1538692437.825 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T22:33:57.826Z,1538692437.826 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,32768,-32768,V
2018-10-04T22:34:09.016Z,1538692449.016 [RDI_Pathfinder](ERROR): Failed to parse:
:H8c,0ffd, 15.887, -0.007, 0.000
2018-10-04T22:35:26.407Z,1538692526.407 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T22:35:26.407Z,1538692526.407 [NAL9602] Data Fault, FailCount= 5
2018-10-04T22:35:26.407Z,1538692526.407 [NAL9602](ERROR): Data Fault
2018-10-04T22:35:26.501Z,1538692526.501 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T22:35:26.502Z,1538692526.502 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T22:35:26.827Z,1538692526.827 [NAL9602](INFO): Powering down
2018-10-04T22:35:26.894Z,1538692526.894 [CBIT](INFO): Critical error at 20181004T223526
2018-10-04T22:35:49.342Z,1538692549.342 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:35:49.342Z,1538692549.342 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-10-04T22:35:49.342Z,1538692549.342 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:35:49.344Z,1538692549.344 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:35:49.344Z,1538692549.344 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-10-04T22:35:49.344Z,1538692549.344 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:35:49.358Z,1538692549.358 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:35:49.358Z,1538692549.358 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:35:49.777Z,1538692549.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:35:49.777Z,1538692549.777 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-10-04T22:35:49.778Z,1538692549.778 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:35:49.778Z,1538692549.778 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-10-04T22:35:50.162Z,1538692550.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:35:50.162Z,1538692550.162 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:35:50.163Z,1538692550.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:35:50.163Z,1538692550.163 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:35:50.163Z,1538692550.163 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:35:50.164Z,1538692550.164 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:37:26.766Z,1538692646.766 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T22:37:26.766Z,1538692646.766 [NAL9602] No Fault, FailCount= 5
2018-10-04T22:37:27.075Z,1538692647.075 [NAL9602](INFO): Powering up NAL9602
2018-10-04T22:37:38.271Z,1538692658.271 [NAL9602](INFO): NAL9602 initialized
2018-10-04T22:38:01.532Z,1538692681.532 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T22:32:59.2Z
2018-10-04T22:38:01.532Z,1538692681.532 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T22:38:01.532Z,1538692681.532 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T22:38:06.473Z,1538692686.473 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0322.lzma
2018-10-04T22:38:07.241Z,1538692687.241 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0322.lzma.bak
2018-10-04T22:38:07.241Z,1538692687.241 [DataOverHttps](INFO): SBD MOMSN=8611210
2018-10-04T22:38:16.425Z,1538692696.425 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0323.lzma
2018-10-04T22:38:17.189Z,1538692697.189 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0323.lzma.bak
2018-10-04T22:38:17.190Z,1538692697.190 [DataOverHttps](INFO): SBD MOMSN=8611213
2018-10-04T22:38:18.174Z,1538692698.174 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T22:38:18.174Z,1538692698.174 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T22:38:18.174Z,1538692698.174 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T22:38:50.357Z,1538692730.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:38:50.357Z,1538692730.357 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-10-04T22:38:50.357Z,1538692730.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:38:50.362Z,1538692730.362 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:38:50.362Z,1538692730.362 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-10-04T22:38:50.362Z,1538692730.362 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:38:50.388Z,1538692730.388 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:38:50.388Z,1538692730.388 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:38:50.795Z,1538692730.795 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:38:50.795Z,1538692730.795 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-10-04T22:38:50.796Z,1538692730.796 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:38:50.796Z,1538692730.796 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-10-04T22:38:51.164Z,1538692731.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:38:51.164Z,1538692731.164 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:38:51.165Z,1538692731.165 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:38:51.165Z,1538692731.165 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:38:51.166Z,1538692731.166 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:38:51.166Z,1538692731.166 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:41:54.253Z,1538692914.253 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:41:54.253Z,1538692914.253 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-10-04T22:41:54.254Z,1538692914.254 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:41:54.258Z,1538692914.258 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:41:54.258Z,1538692914.258 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-10-04T22:41:54.258Z,1538692914.258 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:41:54.276Z,1538692914.276 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:41:54.276Z,1538692914.276 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:41:54.388Z,1538692914.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:41:54.388Z,1538692914.388 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-10-04T22:41:54.388Z,1538692914.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:41:54.388Z,1538692914.388 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-10-04T22:41:54.773Z,1538692914.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:41:54.774Z,1538692914.774 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:41:54.774Z,1538692914.774 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:41:54.775Z,1538692914.775 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:41:54.775Z,1538692914.775 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:41:54.775Z,1538692914.775 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:43:18.600Z,1538692998.600 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T22:43:18.601Z,1538692998.601 [Default:CheckIn:C.Wait] Stopped
2018-10-04T22:43:18.602Z,1538692998.602 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T22:43:18.602Z,1538692998.602 [Default:CheckIn:D] Running Loop=1
2018-10-04T22:43:19.009Z,1538692999.009 [Default:CheckIn:D] Stopped
2018-10-04T22:43:19.009Z,1538692999.009 [Default:CheckIn:E] Running Loop=1
2018-10-04T22:43:19.405Z,1538692999.405 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1106.854036 min 
2018-10-04T22:43:19.405Z,1538692999.405 [Default:CheckIn:E] Stopped
2018-10-04T22:43:19.406Z,1538692999.406 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T22:43:19.406Z,1538692999.406 [Default:CheckIn] Stopped
2018-10-04T22:43:19.406Z,1538692999.406 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T22:43:19.406Z,1538692999.406 [Default:CheckIn](INFO): Running loop #108
2018-10-04T22:43:19.406Z,1538692999.406 [Default:CheckIn] Running Loop=108
2018-10-04T22:43:19.406Z,1538692999.406 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T22:43:19.406Z,1538692999.406 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T22:44:54.994Z,1538693094.994 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:44:54.994Z,1538693094.994 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-10-04T22:44:54.994Z,1538693094.994 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:44:54.996Z,1538693094.996 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:44:54.996Z,1538693094.996 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-10-04T22:44:54.996Z,1538693094.996 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:44:55.025Z,1538693095.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:44:55.026Z,1538693095.026 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:44:55.398Z,1538693095.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:44:55.398Z,1538693095.398 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-10-04T22:44:55.398Z,1538693095.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:44:55.398Z,1538693095.398 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-10-04T22:44:55.773Z,1538693095.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:44:55.773Z,1538693095.773 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:44:55.774Z,1538693095.774 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:44:55.774Z,1538693095.774 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:44:55.775Z,1538693095.775 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:44:55.775Z,1538693095.775 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:45:12.165Z,1538693112.165 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-04T22:45:12.166Z,1538693112.166 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,32768,V
2018-10-04T22:47:40.846Z,1538693260.846 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T22:47:40.846Z,1538693260.846 [NAL9602] Data Fault, FailCount= 1
2018-10-04T22:47:40.846Z,1538693260.846 [NAL9602](ERROR): Data Fault
2018-10-04T22:47:40.930Z,1538693260.930 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T22:47:41.231Z,1538693261.231 [NAL9602](INFO): Powering down
2018-10-04T22:47:42.096Z,1538693262.096 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T22:47:42.096Z,1538693262.096 [NAL9602] No Fault, FailCount= 1
2018-10-04T22:47:55.790Z,1538693275.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:47:55.790Z,1538693275.790 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-10-04T22:47:55.790Z,1538693275.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:47:55.792Z,1538693275.792 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:47:55.792Z,1538693275.792 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-10-04T22:47:55.792Z,1538693275.792 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:47:55.821Z,1538693275.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:47:55.822Z,1538693275.822 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:47:56.236Z,1538693276.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:47:56.236Z,1538693276.236 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-10-04T22:47:56.241Z,1538693276.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:47:56.241Z,1538693276.241 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-10-04T22:47:56.585Z,1538693276.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:47:56.586Z,1538693276.586 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:47:56.586Z,1538693276.586 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:47:56.587Z,1538693276.587 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:47:56.587Z,1538693276.587 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:47:56.587Z,1538693276.587 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:48:11.359Z,1538693291.359 [NAL9602](INFO): Powering up NAL9602
2018-10-04T22:48:21.798Z,1538693301.798 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T22:43:19.4Z
2018-10-04T22:48:21.798Z,1538693301.798 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T22:48:21.798Z,1538693301.798 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T22:48:22.481Z,1538693302.481 [NAL9602](INFO): NAL9602 initialized
2018-10-04T22:48:26.694Z,1538693306.694 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0325.lzma
2018-10-04T22:48:27.489Z,1538693307.489 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0325.lzma.bak
2018-10-04T22:48:27.489Z,1538693307.489 [DataOverHttps](INFO): SBD MOMSN=8611217
2018-10-04T22:48:37.262Z,1538693317.262 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20181004T041305/Express0326.lzma
2018-10-04T22:48:38.037Z,1538693318.037 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0326.lzma.bak
2018-10-04T22:48:38.037Z,1538693318.037 [DataOverHttps](INFO): SBD MOMSN=8611219
2018-10-04T22:48:38.087Z,1538693318.087 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-04T22:48:38.995Z,1538693318.995 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T22:48:38.995Z,1538693318.995 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T22:48:38.995Z,1538693318.995 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T22:50:56.719Z,1538693456.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:50:56.719Z,1538693456.719 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-10-04T22:50:56.719Z,1538693456.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:50:56.725Z,1538693456.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:50:56.725Z,1538693456.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-10-04T22:50:56.725Z,1538693456.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:50:56.755Z,1538693456.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:50:56.755Z,1538693456.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:50:57.177Z,1538693457.177 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:50:57.177Z,1538693457.177 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-10-04T22:50:57.177Z,1538693457.177 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:50:57.178Z,1538693457.178 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-10-04T22:50:57.530Z,1538693457.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:50:57.531Z,1538693457.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:50:57.531Z,1538693457.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:50:57.532Z,1538693457.532 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:50:57.532Z,1538693457.532 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:50:57.532Z,1538693457.532 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:51:42.148Z,1538693502.148 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.867, -0.003, 0.000
2018-10-04T22:53:19.127Z,1538693599.127 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T22:53:19.127Z,1538693599.127 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100415581579,35,   0.0,1448.9,  0
2018-10-04T22:53:39.258Z,1538693619.258 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T22:53:39.258Z,1538693619.258 [Default:CheckIn:C.Wait] Stopped
2018-10-04T22:53:39.258Z,1538693619.258 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T22:53:39.258Z,1538693619.258 [Default:CheckIn:D] Running Loop=1
2018-10-04T22:53:39.665Z,1538693619.665 [Default:CheckIn:D] Stopped
2018-10-04T22:53:39.665Z,1538693619.665 [Default:CheckIn:E] Running Loop=1
2018-10-04T22:53:40.068Z,1538693620.068 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1117.198307 min 
2018-10-04T22:53:40.068Z,1538693620.068 [Default:CheckIn:E] Stopped
2018-10-04T22:53:40.069Z,1538693620.069 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T22:53:40.069Z,1538693620.069 [Default:CheckIn] Stopped
2018-10-04T22:53:40.069Z,1538693620.069 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T22:53:40.069Z,1538693620.069 [Default:CheckIn](INFO): Running loop #109
2018-10-04T22:53:40.069Z,1538693620.069 [Default:CheckIn] Running Loop=109
2018-10-04T22:53:40.070Z,1538693620.070 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T22:53:40.070Z,1538693620.070 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T22:54:00.456Z,1538693640.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:54:00.456Z,1538693640.456 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-10-04T22:54:00.456Z,1538693640.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:54:00.458Z,1538693640.458 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:54:00.458Z,1538693640.458 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-10-04T22:54:00.458Z,1538693640.458 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:54:00.517Z,1538693640.517 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:54:00.517Z,1538693640.517 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:54:00.627Z,1538693640.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:54:00.627Z,1538693640.627 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-10-04T22:54:00.627Z,1538693640.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:54:00.627Z,1538693640.627 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-10-04T22:54:01.015Z,1538693641.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:54:01.016Z,1538693641.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:54:01.016Z,1538693641.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:54:01.017Z,1538693641.017 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:54:01.017Z,1538693641.017 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:54:01.018Z,1538693641.018 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:57:01.173Z,1538693821.173 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:57:01.174Z,1538693821.174 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-10-04T22:57:01.174Z,1538693821.174 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T22:57:01.175Z,1538693821.175 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T22:57:01.176Z,1538693821.176 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-10-04T22:57:01.176Z,1538693821.176 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T22:57:01.205Z,1538693821.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T22:57:01.206Z,1538693821.206 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T22:57:01.601Z,1538693821.601 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T22:57:01.601Z,1538693821.601 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-10-04T22:57:01.602Z,1538693821.602 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T22:57:01.602Z,1538693821.602 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-10-04T22:57:01.955Z,1538693821.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T22:57:01.956Z,1538693821.956 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:57:01.956Z,1538693821.956 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:57:01.957Z,1538693821.957 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T22:57:01.961Z,1538693821.961 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T22:57:01.962Z,1538693821.962 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T22:58:24.067Z,1538693904.067 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T22:58:24.067Z,1538693904.067 [NAL9602] Data Fault, FailCount= 2
2018-10-04T22:58:24.067Z,1538693904.067 [NAL9602](ERROR): Data Fault
2018-10-04T22:58:24.160Z,1538693904.160 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T22:58:24.467Z,1538693904.467 [NAL9602](INFO): Powering down
2018-10-04T22:58:25.335Z,1538693905.335 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T22:58:25.335Z,1538693905.335 [NAL9602] No Fault, FailCount= 2
2018-10-04T22:58:42.499Z,1538693922.499 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T22:53:40.1Z
2018-10-04T22:58:42.500Z,1538693922.500 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T22:58:42.500Z,1538693922.500 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T22:58:48.357Z,1538693928.357 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0328.lzma
2018-10-04T22:58:49.141Z,1538693929.141 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0328.lzma.bak
2018-10-04T22:58:49.141Z,1538693929.141 [DataOverHttps](INFO): SBD MOMSN=8611223
2018-10-04T22:58:54.602Z,1538693934.602 [NAL9602](INFO): Powering up NAL9602
2018-10-04T22:58:58.261Z,1538693938.261 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0329.lzma
2018-10-04T22:58:59.068Z,1538693939.068 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0329.lzma.bak
2018-10-04T22:58:59.068Z,1538693939.068 [DataOverHttps](INFO): SBD MOMSN=8611225
2018-10-04T22:59:00.021Z,1538693940.021 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T22:59:00.022Z,1538693940.022 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T22:59:00.022Z,1538693940.022 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T22:59:05.715Z,1538693945.715 [NAL9602](INFO): NAL9602 initialized
2018-10-04T23:00:02.291Z,1538694002.291 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:00:02.291Z,1538694002.291 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-10-04T23:00:02.291Z,1538694002.291 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:00:02.297Z,1538694002.297 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:00:02.297Z,1538694002.297 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-10-04T23:00:02.297Z,1538694002.297 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:00:02.319Z,1538694002.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:00:02.319Z,1538694002.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:00:02.710Z,1538694002.710 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:00:02.710Z,1538694002.710 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-10-04T23:00:02.711Z,1538694002.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:00:02.711Z,1538694002.711 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-10-04T23:00:03.093Z,1538694003.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:00:03.093Z,1538694003.093 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:00:03.094Z,1538694003.094 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:00:03.094Z,1538694003.094 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:00:03.095Z,1538694003.095 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:00:03.095Z,1538694003.095 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:01:28.006Z,1538694088.006 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T23:03:03.204Z,1538694183.204 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:03:03.204Z,1538694183.204 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-10-04T23:03:03.205Z,1538694183.205 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:03:03.207Z,1538694183.207 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:03:03.207Z,1538694183.207 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-10-04T23:03:03.207Z,1538694183.207 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:03:03.236Z,1538694183.236 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:03:03.236Z,1538694183.236 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:03:03.658Z,1538694183.658 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:03:03.658Z,1538694183.658 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-10-04T23:03:03.659Z,1538694183.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:03:03.659Z,1538694183.659 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-10-04T23:03:04.018Z,1538694184.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:03:04.019Z,1538694184.019 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:03:04.019Z,1538694184.019 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:03:04.020Z,1538694184.020 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:03:04.020Z,1538694184.020 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:03:04.020Z,1538694184.020 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:04:00.292Z,1538694240.292 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T23:04:00.293Z,1538694240.293 [Default:CheckIn:C.Wait] Stopped
2018-10-04T23:04:00.293Z,1538694240.293 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T23:04:00.293Z,1538694240.293 [Default:CheckIn:D] Running Loop=1
2018-10-04T23:04:00.689Z,1538694240.689 [Default:CheckIn:D] Stopped
2018-10-04T23:04:00.690Z,1538694240.690 [Default:CheckIn:E] Running Loop=1
2018-10-04T23:04:01.101Z,1538694241.101 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1127.548698 min 
2018-10-04T23:04:01.101Z,1538694241.101 [Default:CheckIn:E] Stopped
2018-10-04T23:04:01.101Z,1538694241.101 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T23:04:01.101Z,1538694241.101 [Default:CheckIn] Stopped
2018-10-04T23:04:01.101Z,1538694241.101 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T23:04:01.102Z,1538694241.102 [Default:CheckIn](INFO): Running loop #110
2018-10-04T23:04:01.102Z,1538694241.102 [Default:CheckIn] Running Loop=110
2018-10-04T23:04:01.102Z,1538694241.102 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T23:04:01.102Z,1538694241.102 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T23:06:06.925Z,1538694366.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:06:06.925Z,1538694366.925 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-10-04T23:06:06.926Z,1538694366.926 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:06:06.927Z,1538694366.927 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:06:06.927Z,1538694366.927 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-10-04T23:06:06.928Z,1538694366.928 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:06:06.941Z,1538694366.941 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:06:06.941Z,1538694366.941 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:06:07.095Z,1538694367.095 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:06:07.096Z,1538694367.096 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-10-04T23:06:07.097Z,1538694367.097 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:06:07.109Z,1538694367.109 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-10-04T23:06:07.420Z,1538694367.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:06:07.420Z,1538694367.420 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:06:07.420Z,1538694367.420 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:06:07.425Z,1538694367.425 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:06:07.426Z,1538694367.426 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:06:07.426Z,1538694367.426 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:07:54.045Z,1538694474.045 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T23:09:03.377Z,1538694543.377 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T23:04:01.1Z
2018-10-04T23:09:03.377Z,1538694543.377 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T23:09:03.378Z,1538694543.378 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T23:09:08.200Z,1538694548.200 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T23:09:08.200Z,1538694548.200 [NAL9602] Data Fault, FailCount= 3
2018-10-04T23:09:08.201Z,1538694548.201 [NAL9602](ERROR): Data Fault
2018-10-04T23:09:08.268Z,1538694548.268 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:09:08.269Z,1538694548.269 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-10-04T23:09:08.269Z,1538694548.269 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:09:08.271Z,1538694548.271 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:09:08.271Z,1538694548.271 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-10-04T23:09:08.271Z,1538694548.271 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:09:08.304Z,1538694548.304 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:09:08.305Z,1538694548.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:09:08.309Z,1538694548.309 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T23:09:08.358Z,1538694548.358 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0331.lzma
2018-10-04T23:09:08.366Z,1538694548.366 [NAL9602](INFO): Powering down
2018-10-04T23:09:08.423Z,1538694548.423 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:09:08.423Z,1538694548.423 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-10-04T23:09:08.423Z,1538694548.423 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:09:08.423Z,1538694548.423 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-10-04T23:09:08.800Z,1538694548.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:09:08.825Z,1538694548.825 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:09:08.825Z,1538694548.825 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:09:08.826Z,1538694548.826 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:09:08.826Z,1538694548.826 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:09:08.827Z,1538694548.827 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:09:09.136Z,1538694549.136 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0331.lzma.bak
2018-10-04T23:09:09.136Z,1538694549.136 [DataOverHttps](INFO): SBD MOMSN=8611229
2018-10-04T23:09:09.205Z,1538694549.205 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T23:09:09.205Z,1538694549.205 [NAL9602] No Fault, FailCount= 3
2018-10-04T23:09:18.237Z,1538694558.237 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20181004T041305/Express0332.lzma
2018-10-04T23:09:19.032Z,1538694559.032 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0332.lzma.bak
2018-10-04T23:09:19.033Z,1538694559.033 [DataOverHttps](INFO): SBD MOMSN=8611231
2018-10-04T23:09:19.992Z,1538694559.992 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T23:09:19.992Z,1538694559.992 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T23:09:19.992Z,1538694559.992 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T23:09:38.532Z,1538694578.532 [NAL9602](INFO): Powering up NAL9602
2018-10-04T23:09:49.729Z,1538694589.729 [NAL9602](INFO): NAL9602 initialized
2018-10-04T23:10:24.129Z,1538694624.129 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=60.014320
2018-10-04T23:11:00.525Z,1538694660.525 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-10-04T23:11:10.257Z,1538694670.257 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002529
2018-10-04T23:12:08.809Z,1538694728.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:12:08.809Z,1538694728.809 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-10-04T23:12:08.809Z,1538694728.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:12:08.823Z,1538694728.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:12:09.191Z,1538694729.191 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:12:09.191Z,1538694729.191 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-10-04T23:12:09.191Z,1538694729.191 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:12:09.213Z,1538694729.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:12:09.217Z,1538694729.217 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-10-04T23:12:09.217Z,1538694729.217 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:12:09.597Z,1538694729.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:12:09.597Z,1538694729.597 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:12:09.598Z,1538694729.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:12:09.612Z,1538694729.612 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:12:09.612Z,1538694729.612 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-10-04T23:12:10.011Z,1538694730.011 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:12:10.011Z,1538694730.011 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:12:10.011Z,1538694730.011 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:14:20.417Z,1538694860.417 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T23:14:20.417Z,1538694860.417 [Default:CheckIn:C.Wait] Stopped
2018-10-04T23:14:20.417Z,1538694860.417 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T23:14:20.417Z,1538694860.417 [Default:CheckIn:D] Running Loop=1
2018-10-04T23:14:20.830Z,1538694860.830 [Default:CheckIn:D] Stopped
2018-10-04T23:14:20.830Z,1538694860.830 [Default:CheckIn:E] Running Loop=1
2018-10-04T23:14:21.223Z,1538694861.223 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1137.884375 min 
2018-10-04T23:14:21.223Z,1538694861.223 [Default:CheckIn:E] Stopped
2018-10-04T23:14:21.223Z,1538694861.223 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T23:14:21.223Z,1538694861.223 [Default:CheckIn] Stopped
2018-10-04T23:14:21.223Z,1538694861.223 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T23:14:21.224Z,1538694861.224 [Default:CheckIn](INFO): Running loop #111
2018-10-04T23:14:21.224Z,1538694861.224 [Default:CheckIn] Running Loop=111
2018-10-04T23:14:21.224Z,1538694861.224 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T23:14:21.224Z,1538694861.224 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T23:15:09.730Z,1538694909.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:15:09.730Z,1538694909.730 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-10-04T23:15:09.730Z,1538694909.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:15:09.770Z,1538694909.770 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:15:10.135Z,1538694910.135 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:15:10.135Z,1538694910.135 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-10-04T23:15:10.135Z,1538694910.135 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:15:10.169Z,1538694910.169 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:15:10.169Z,1538694910.169 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-10-04T23:15:10.170Z,1538694910.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:15:10.490Z,1538694910.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:15:10.490Z,1538694910.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:15:10.491Z,1538694910.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:15:10.503Z,1538694910.503 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:15:10.503Z,1538694910.503 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-10-04T23:15:10.910Z,1538694910.910 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:15:10.910Z,1538694910.910 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:15:10.911Z,1538694910.911 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:16:19.117Z,1538694979.117 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-04T23:16:19.117Z,1538694979.117 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100416211, -0.1,   0.0,1448.9,  0
2018-10-04T23:18:12.931Z,1538695092.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:18:12.931Z,1538695092.931 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-10-04T23:18:12.932Z,1538695092.932 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:18:12.933Z,1538695092.933 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:18:12.934Z,1538695092.934 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-10-04T23:18:12.934Z,1538695092.934 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:18:12.946Z,1538695092.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:18:12.947Z,1538695092.947 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:18:13.069Z,1538695093.069 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:18:13.069Z,1538695093.069 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-10-04T23:18:13.070Z,1538695093.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:18:13.070Z,1538695093.070 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-10-04T23:18:13.430Z,1538695093.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:18:13.430Z,1538695093.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:18:13.431Z,1538695093.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:18:13.431Z,1538695093.431 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:18:13.431Z,1538695093.431 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:18:13.432Z,1538695093.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:19:23.506Z,1538695163.506 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T23:14:21.2Z
2018-10-04T23:19:23.506Z,1538695163.506 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T23:19:23.506Z,1538695163.506 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T23:19:28.828Z,1538695168.828 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0334.lzma
2018-10-04T23:19:29.636Z,1538695169.636 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0334.lzma.bak
2018-10-04T23:19:29.636Z,1538695169.636 [DataOverHttps](INFO): SBD MOMSN=8611234
2018-10-04T23:19:43.149Z,1538695183.149 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0335.lzma
2018-10-04T23:19:43.178Z,1538695183.178 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-04T23:19:43.670Z,1538695183.670 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0335.lzma.bak
2018-10-04T23:19:43.670Z,1538695183.670 [DataOverHttps](INFO): SBD MOMSN=8611236
2018-10-04T23:19:44.649Z,1538695184.649 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T23:19:44.649Z,1538695184.649 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T23:19:44.649Z,1538695184.649 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T23:19:51.151Z,1538695191.151 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T23:19:51.151Z,1538695191.151 [NAL9602] Data Fault, FailCount= 4
2018-10-04T23:19:51.151Z,1538695191.151 [NAL9602](ERROR): Data Fault
2018-10-04T23:19:51.245Z,1538695191.245 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T23:19:51.549Z,1538695191.549 [NAL9602](INFO): Powering down
2018-10-04T23:19:52.408Z,1538695192.408 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T23:19:52.408Z,1538695192.408 [NAL9602] No Fault, FailCount= 4
2018-10-04T23:20:23.817Z,1538695223.817 [NAL9602](INFO): Powering up NAL9602
2018-10-04T23:20:34.723Z,1538695234.723 [NAL9602](INFO): NAL9602 initialized
2018-10-04T23:21:13.807Z,1538695273.807 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:21:13.807Z,1538695273.807 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-10-04T23:21:13.807Z,1538695273.807 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:21:13.809Z,1538695273.809 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:21:13.809Z,1538695273.809 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-10-04T23:21:13.810Z,1538695273.810 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:21:13.823Z,1538695273.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:21:13.823Z,1538695273.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:21:14.211Z,1538695274.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:21:14.211Z,1538695274.211 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-10-04T23:21:14.212Z,1538695274.212 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:21:14.212Z,1538695274.212 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-10-04T23:21:14.574Z,1538695274.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:21:14.574Z,1538695274.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:21:14.575Z,1538695274.575 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:21:14.575Z,1538695274.575 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:21:14.575Z,1538695274.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:21:14.576Z,1538695274.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:24:14.807Z,1538695454.807 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:24:14.807Z,1538695454.807 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-10-04T23:24:14.807Z,1538695454.807 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:24:14.809Z,1538695454.809 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:24:14.809Z,1538695454.809 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-10-04T23:24:14.809Z,1538695454.809 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:24:14.832Z,1538695454.832 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:24:14.832Z,1538695454.832 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:24:15.268Z,1538695455.268 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:24:15.268Z,1538695455.268 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-10-04T23:24:15.269Z,1538695455.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:24:15.269Z,1538695455.269 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-10-04T23:24:15.622Z,1538695455.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:24:15.622Z,1538695455.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:24:15.623Z,1538695455.623 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:24:15.623Z,1538695455.623 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:24:15.624Z,1538695455.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:24:15.624Z,1538695455.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:24:44.923Z,1538695484.923 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T23:24:44.924Z,1538695484.924 [Default:CheckIn:C.Wait] Stopped
2018-10-04T23:24:44.924Z,1538695484.924 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T23:24:44.924Z,1538695484.924 [Default:CheckIn:D] Running Loop=1
2018-10-04T23:24:45.321Z,1538695485.321 [Default:CheckIn:D] Stopped
2018-10-04T23:24:45.321Z,1538695485.321 [Default:CheckIn:E] Running Loop=1
2018-10-04T23:24:45.703Z,1538695485.703 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1148.292578 min 
2018-10-04T23:24:45.704Z,1538695485.704 [Default:CheckIn:E] Stopped
2018-10-04T23:24:45.704Z,1538695485.704 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T23:24:45.704Z,1538695485.704 [Default:CheckIn] Stopped
2018-10-04T23:24:45.704Z,1538695485.704 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T23:24:45.704Z,1538695485.704 [Default:CheckIn](INFO): Running loop #112
2018-10-04T23:24:45.704Z,1538695485.704 [Default:CheckIn] Running Loop=112
2018-10-04T23:24:45.705Z,1538695485.705 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T23:24:45.705Z,1538695485.705 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T23:26:22.490Z,1538695582.490 [BPC1](ERROR): BPC1B failed to parse battery data due to unrecognized msg size.
2018-10-04T23:26:33.582Z,1538695593.582 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-04T23:27:15.635Z,1538695635.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:27:15.635Z,1538695635.635 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-10-04T23:27:15.635Z,1538695635.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:27:15.653Z,1538695635.653 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:27:15.653Z,1538695635.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-10-04T23:27:15.653Z,1538695635.653 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:27:15.675Z,1538695635.675 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:27:15.675Z,1538695635.675 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:27:16.088Z,1538695636.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:27:16.088Z,1538695636.088 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-10-04T23:27:16.088Z,1538695636.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:27:16.088Z,1538695636.088 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-10-04T23:27:16.449Z,1538695636.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:27:16.449Z,1538695636.449 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:27:16.450Z,1538695636.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:27:16.450Z,1538695636.450 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:27:16.451Z,1538695636.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:27:16.451Z,1538695636.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:28:03.002Z,1538695683.002 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-04T23:29:47.504Z,1538695787.504 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T23:24:45.7Z
2018-10-04T23:29:47.505Z,1538695787.505 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T23:29:47.535Z,1538695787.535 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T23:29:52.470Z,1538695792.470 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0337.lzma
2018-10-04T23:29:53.237Z,1538695793.237 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0337.lzma.bak
2018-10-04T23:29:53.237Z,1538695793.237 [DataOverHttps](INFO): SBD MOMSN=8611240
2018-10-04T23:30:03.651Z,1538695803.651 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0338.lzma
2018-10-04T23:30:04.425Z,1538695804.425 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0338.lzma.bak
2018-10-04T23:30:04.426Z,1538695804.426 [DataOverHttps](INFO): SBD MOMSN=8611242
2018-10-04T23:30:05.401Z,1538695805.401 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T23:30:05.401Z,1538695805.401 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T23:30:05.401Z,1538695805.401 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T23:30:16.832Z,1538695816.832 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:30:16.832Z,1538695816.832 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-10-04T23:30:16.832Z,1538695816.832 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:30:16.834Z,1538695816.834 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:30:16.834Z,1538695816.834 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-10-04T23:30:16.834Z,1538695816.834 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:30:16.847Z,1538695816.847 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:30:16.848Z,1538695816.848 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:30:17.245Z,1538695817.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:30:17.246Z,1538695817.246 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-10-04T23:30:17.246Z,1538695817.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:30:17.246Z,1538695817.246 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-10-04T23:30:17.628Z,1538695817.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:30:17.629Z,1538695817.629 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:30:17.629Z,1538695817.629 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:30:17.630Z,1538695817.630 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:30:17.630Z,1538695817.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:30:17.630Z,1538695817.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:30:37.975Z,1538695837.975 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T23:30:37.975Z,1538695837.975 [NAL9602] Data Fault, FailCount= 5
2018-10-04T23:30:37.975Z,1538695837.975 [NAL9602](ERROR): Data Fault
2018-10-04T23:30:38.066Z,1538695838.066 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T23:30:38.066Z,1538695838.066 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-04T23:30:38.371Z,1538695838.371 [NAL9602](INFO): Powering down
2018-10-04T23:30:38.432Z,1538695838.432 [CBIT](INFO): Critical error at 20181004T233038
2018-10-04T23:32:37.993Z,1538695957.993 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T23:32:37.993Z,1538695957.993 [NAL9602] No Fault, FailCount= 5
2018-10-04T23:32:38.319Z,1538695958.319 [NAL9602](INFO): Powering up NAL9602
2018-10-04T23:32:49.119Z,1538695969.119 [NAL9602](INFO): NAL9602 initialized
2018-10-04T23:33:17.659Z,1538695997.659 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:33:17.660Z,1538695997.660 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-10-04T23:33:17.660Z,1538695997.660 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:33:17.662Z,1538695997.662 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:33:17.662Z,1538695997.662 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-10-04T23:33:17.662Z,1538695997.662 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:33:17.675Z,1538695997.675 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:33:17.675Z,1538695997.675 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:33:18.102Z,1538695998.102 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:33:18.102Z,1538695998.102 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-10-04T23:33:18.103Z,1538695998.103 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:33:18.103Z,1538695998.103 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-10-04T23:33:18.465Z,1538695998.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:33:18.466Z,1538695998.466 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:33:18.466Z,1538695998.466 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:33:18.467Z,1538695998.467 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:33:18.467Z,1538695998.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:33:18.467Z,1538695998.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:35:05.932Z,1538696105.932 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T23:35:05.932Z,1538696105.932 [Default:CheckIn:C.Wait] Stopped
2018-10-04T23:35:05.932Z,1538696105.932 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T23:35:05.932Z,1538696105.932 [Default:CheckIn:D] Running Loop=1
2018-10-04T23:35:06.311Z,1538696106.311 [Default:CheckIn:D] Stopped
2018-10-04T23:35:06.311Z,1538696106.311 [Default:CheckIn:E] Running Loop=1
2018-10-04T23:35:06.701Z,1538696106.701 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1158.642318 min 
2018-10-04T23:35:06.701Z,1538696106.701 [Default:CheckIn:E] Stopped
2018-10-04T23:35:06.702Z,1538696106.702 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T23:35:06.702Z,1538696106.702 [Default:CheckIn] Stopped
2018-10-04T23:35:06.702Z,1538696106.702 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T23:35:06.702Z,1538696106.702 [Default:CheckIn](INFO): Running loop #113
2018-10-04T23:35:06.702Z,1538696106.702 [Default:CheckIn] Running Loop=113
2018-10-04T23:35:06.702Z,1538696106.702 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T23:35:06.702Z,1538696106.702 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T23:35:11.087Z,1538696111.087 [RDI_Pathfinder](ERROR): Failed to parse:768,-32768,-32768,-32768,V
2018-10-04T23:36:18.914Z,1538696178.914 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:36:18.914Z,1538696178.914 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-10-04T23:36:18.914Z,1538696178.914 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:36:18.916Z,1538696178.916 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:36:18.916Z,1538696178.916 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-10-04T23:36:18.916Z,1538696178.916 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:36:18.949Z,1538696178.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:36:18.950Z,1538696178.950 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:36:19.266Z,1538696179.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:36:19.266Z,1538696179.266 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-10-04T23:36:19.267Z,1538696179.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:36:19.267Z,1538696179.267 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-10-04T23:36:19.718Z,1538696179.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:36:19.719Z,1538696179.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:36:19.719Z,1538696179.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:36:19.719Z,1538696179.719 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:36:19.720Z,1538696179.720 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:36:19.720Z,1538696179.720 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:39:19.973Z,1538696359.973 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:39:19.973Z,1538696359.973 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-10-04T23:39:19.974Z,1538696359.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:39:19.975Z,1538696359.975 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:39:19.976Z,1538696359.976 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-10-04T23:39:19.976Z,1538696359.976 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:39:20.005Z,1538696360.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:39:20.006Z,1538696360.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:39:20.372Z,1538696360.372 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:39:20.372Z,1538696360.372 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-10-04T23:39:20.372Z,1538696360.372 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:39:20.372Z,1538696360.372 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-10-04T23:39:20.775Z,1538696360.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:39:20.775Z,1538696360.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:39:20.776Z,1538696360.776 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:39:20.776Z,1538696360.776 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:39:20.777Z,1538696360.777 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:39:20.781Z,1538696360.781 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:40:08.514Z,1538696408.514 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T23:35:06.7Z
2018-10-04T23:40:08.514Z,1538696408.514 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T23:40:08.515Z,1538696408.515 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T23:40:13.495Z,1538696413.495 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0340.lzma
2018-10-04T23:40:14.259Z,1538696414.259 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0340.lzma.bak
2018-10-04T23:40:14.260Z,1538696414.260 [DataOverHttps](INFO): SBD MOMSN=8611246
2018-10-04T23:40:23.858Z,1538696423.858 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0341.lzma
2018-10-04T23:40:24.609Z,1538696424.609 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0341.lzma.bak
2018-10-04T23:40:24.609Z,1538696424.609 [DataOverHttps](INFO): SBD MOMSN=8611249
2018-10-04T23:40:25.562Z,1538696425.562 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.873, -0.009, 0.000
2018-10-04T23:40:25.572Z,1538696425.572 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T23:40:25.572Z,1538696425.572 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T23:40:25.572Z,1538696425.572 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T23:42:20.896Z,1538696540.896 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:42:20.896Z,1538696540.896 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-10-04T23:42:20.896Z,1538696540.896 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:42:20.898Z,1538696540.898 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:42:20.898Z,1538696540.898 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-10-04T23:42:20.898Z,1538696540.898 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:42:20.935Z,1538696540.935 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:42:20.935Z,1538696540.935 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:42:21.299Z,1538696541.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:42:21.299Z,1538696541.299 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-10-04T23:42:21.300Z,1538696541.300 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:42:21.300Z,1538696541.300 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-10-04T23:42:21.716Z,1538696541.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:42:21.716Z,1538696541.716 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:42:21.716Z,1538696541.716 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:42:21.725Z,1538696541.725 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:42:21.726Z,1538696541.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:42:21.726Z,1538696541.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:42:50.493Z,1538696570.493 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T23:42:50.493Z,1538696570.493 [NAL9602] Data Fault, FailCount= 1
2018-10-04T23:42:50.493Z,1538696570.493 [NAL9602](ERROR): Data Fault
2018-10-04T23:42:50.584Z,1538696570.584 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T23:42:50.630Z,1538696570.630 [NAL9602](INFO): Powering down
2018-10-04T23:42:51.483Z,1538696571.483 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T23:42:51.483Z,1538696571.483 [NAL9602] No Fault, FailCount= 1
2018-10-04T23:43:21.007Z,1538696601.007 [NAL9602](INFO): Powering up NAL9602
2018-10-04T23:43:31.887Z,1538696611.887 [NAL9602](INFO): NAL9602 initialized
2018-10-04T23:45:12.986Z,1538696712.986 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.887, -0.007, 0.000
2018-10-04T23:45:21.810Z,1538696721.810 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:45:21.811Z,1538696721.811 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-10-04T23:45:21.811Z,1538696721.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:45:21.812Z,1538696721.812 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:45:21.817Z,1538696721.817 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-10-04T23:45:21.817Z,1538696721.817 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:45:21.842Z,1538696721.842 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:45:21.843Z,1538696721.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:45:22.214Z,1538696722.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:45:22.215Z,1538696722.215 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-10-04T23:45:22.215Z,1538696722.215 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:45:22.215Z,1538696722.215 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-10-04T23:45:22.602Z,1538696722.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:45:22.602Z,1538696722.602 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:45:22.603Z,1538696722.603 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:45:22.603Z,1538696722.603 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:45:22.603Z,1538696722.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:45:22.604Z,1538696722.604 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:45:25.797Z,1538696725.797 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T23:45:25.797Z,1538696725.797 [Default:CheckIn:C.Wait] Stopped
2018-10-04T23:45:25.798Z,1538696725.798 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T23:45:25.798Z,1538696725.798 [Default:CheckIn:D] Running Loop=1
2018-10-04T23:45:26.229Z,1538696726.229 [Default:CheckIn:D] Stopped
2018-10-04T23:45:26.230Z,1538696726.230 [Default:CheckIn:E] Running Loop=1
2018-10-04T23:45:26.609Z,1538696726.609 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1168.974349 min 
2018-10-04T23:45:26.609Z,1538696726.609 [Default:CheckIn:E] Stopped
2018-10-04T23:45:26.610Z,1538696726.610 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T23:45:26.610Z,1538696726.610 [Default:CheckIn] Stopped
2018-10-04T23:45:26.610Z,1538696726.610 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T23:45:26.610Z,1538696726.610 [Default:CheckIn](INFO): Running loop #114
2018-10-04T23:45:26.610Z,1538696726.610 [Default:CheckIn] Running Loop=114
2018-10-04T23:45:26.610Z,1538696726.610 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T23:45:26.610Z,1538696726.610 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T23:48:22.625Z,1538696902.625 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:48:22.626Z,1538696902.626 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-10-04T23:48:22.626Z,1538696902.626 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:48:22.628Z,1538696902.628 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:48:22.628Z,1538696902.628 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-10-04T23:48:22.628Z,1538696902.628 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:48:22.641Z,1538696902.641 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:48:22.642Z,1538696902.642 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:48:23.036Z,1538696903.036 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:48:23.036Z,1538696903.036 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-10-04T23:48:23.036Z,1538696903.036 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:48:23.036Z,1538696903.036 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-10-04T23:48:23.398Z,1538696903.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:48:23.398Z,1538696903.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:48:23.398Z,1538696903.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:48:23.399Z,1538696903.399 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:48:23.399Z,1538696903.399 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:48:23.400Z,1538696903.400 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:50:29.788Z,1538697029.788 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T23:45:26.6Z
2018-10-04T23:50:29.788Z,1538697029.788 [Default:CheckIn:Read_GPS] Stopped
2018-10-04T23:50:29.788Z,1538697029.788 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-04T23:50:35.088Z,1538697035.088 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0343.lzma
2018-10-04T23:50:35.885Z,1538697035.885 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0343.lzma.bak
2018-10-04T23:50:35.885Z,1538697035.885 [DataOverHttps](INFO): SBD MOMSN=8611253
2018-10-04T23:50:45.462Z,1538697045.462 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0344.lzma
2018-10-04T23:50:46.217Z,1538697046.217 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0344.lzma.bak
2018-10-04T23:50:46.218Z,1538697046.218 [DataOverHttps](INFO): SBD MOMSN=8611255
2018-10-04T23:50:47.176Z,1538697047.176 [Default:CheckIn:Read_Iridium] Stopped
2018-10-04T23:50:47.176Z,1538697047.176 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-04T23:50:47.176Z,1538697047.176 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-04T23:51:26.129Z,1538697086.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:51:26.129Z,1538697086.129 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-10-04T23:51:26.129Z,1538697086.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:51:26.131Z,1538697086.131 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:51:26.131Z,1538697086.131 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-10-04T23:51:26.131Z,1538697086.131 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:51:26.144Z,1538697086.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:51:26.145Z,1538697086.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:51:26.292Z,1538697086.292 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:51:26.292Z,1538697086.292 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-10-04T23:51:26.292Z,1538697086.292 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:51:26.292Z,1538697086.292 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-10-04T23:51:26.634Z,1538697086.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:51:26.634Z,1538697086.634 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:51:26.635Z,1538697086.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:51:26.635Z,1538697086.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:51:26.635Z,1538697086.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:51:26.636Z,1538697086.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:53:34.883Z,1538697214.883 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-04T23:53:34.883Z,1538697214.883 [NAL9602] Data Fault, FailCount= 2
2018-10-04T23:53:34.883Z,1538697214.883 [NAL9602](ERROR): Data Fault
2018-10-04T23:53:34.949Z,1538697214.949 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-04T23:53:35.273Z,1538697215.273 [NAL9602](INFO): Powering down
2018-10-04T23:53:36.139Z,1538697216.139 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-04T23:53:36.139Z,1538697216.139 [NAL9602] No Fault, FailCount= 2
2018-10-04T23:54:05.343Z,1538697245.343 [NAL9602](INFO): Powering up NAL9602
2018-10-04T23:54:16.148Z,1538697256.148 [NAL9602](INFO): NAL9602 initialized
2018-10-04T23:54:26.679Z,1538697266.679 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:54:26.679Z,1538697266.679 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-10-04T23:54:26.679Z,1538697266.679 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:54:26.685Z,1538697266.685 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:54:26.685Z,1538697266.685 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-10-04T23:54:26.685Z,1538697266.685 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:54:26.703Z,1538697266.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:54:26.703Z,1538697266.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:54:27.116Z,1538697267.116 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:54:27.117Z,1538697267.117 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-10-04T23:54:27.121Z,1538697267.121 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:54:27.121Z,1538697267.121 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-10-04T23:54:27.496Z,1538697267.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:54:27.496Z,1538697267.496 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:54:27.496Z,1538697267.496 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:54:27.497Z,1538697267.497 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:54:27.497Z,1538697267.497 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:54:27.498Z,1538697267.498 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:55:47.328Z,1538697347.328 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-04T23:55:47.328Z,1538697347.328 [Default:CheckIn:C.Wait] Stopped
2018-10-04T23:55:47.328Z,1538697347.328 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-04T23:55:47.328Z,1538697347.328 [Default:CheckIn:D] Running Loop=1
2018-10-04T23:55:47.713Z,1538697347.713 [Default:CheckIn:D] Stopped
2018-10-04T23:55:47.713Z,1538697347.713 [Default:CheckIn:E] Running Loop=1
2018-10-04T23:55:48.117Z,1538697348.117 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1179.332422 min 
2018-10-04T23:55:48.121Z,1538697348.121 [Default:CheckIn:E] Stopped
2018-10-04T23:55:48.121Z,1538697348.121 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-04T23:55:48.121Z,1538697348.121 [Default:CheckIn] Stopped
2018-10-04T23:55:48.121Z,1538697348.121 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-04T23:55:48.122Z,1538697348.122 [Default:CheckIn](INFO): Running loop #115
2018-10-04T23:55:48.122Z,1538697348.122 [Default:CheckIn] Running Loop=115
2018-10-04T23:55:48.122Z,1538697348.122 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-04T23:55:48.122Z,1538697348.122 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-04T23:57:27.709Z,1538697447.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:57:27.709Z,1538697447.709 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2018-10-04T23:57:27.710Z,1538697447.710 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-04T23:57:27.711Z,1538697447.711 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-04T23:57:27.712Z,1538697447.712 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2018-10-04T23:57:27.712Z,1538697447.712 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-04T23:57:27.753Z,1538697447.753 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-04T23:57:27.754Z,1538697447.754 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-04T23:57:28.128Z,1538697448.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-04T23:57:28.128Z,1538697448.128 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2018-10-04T23:57:28.129Z,1538697448.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-04T23:57:28.129Z,1538697448.129 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2018-10-04T23:57:28.470Z,1538697448.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-04T23:57:28.470Z,1538697448.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:57:28.471Z,1538697448.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-04T23:57:28.471Z,1538697448.471 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-04T23:57:28.471Z,1538697448.471 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-04T23:57:28.472Z,1538697448.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:00:28.583Z,1538697628.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:00:28.583Z,1538697628.583 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2018-10-05T00:00:28.583Z,1538697628.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:00:28.585Z,1538697628.585 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:00:28.585Z,1538697628.585 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2018-10-05T00:00:28.585Z,1538697628.585 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:00:28.622Z,1538697628.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:00:28.623Z,1538697628.623 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:00:29.031Z,1538697629.031 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:00:29.031Z,1538697629.031 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2018-10-05T00:00:29.031Z,1538697629.031 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:00:29.032Z,1538697629.032 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2018-10-05T00:00:29.406Z,1538697629.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:00:29.406Z,1538697629.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:00:29.407Z,1538697629.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:00:29.407Z,1538697629.407 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:00:29.407Z,1538697629.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:00:29.408Z,1538697629.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:00:50.617Z,1538697650.617 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-04T23:55:48.1Z
2018-10-05T00:00:50.617Z,1538697650.617 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T00:00:50.617Z,1538697650.617 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T00:00:55.966Z,1538697655.966 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0346.lzma
2018-10-05T00:00:57.149Z,1538697657.149 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0346.lzma.bak
2018-10-05T00:00:57.149Z,1538697657.149 [DataOverHttps](INFO): SBD MOMSN=8611259
2018-10-05T00:01:06.725Z,1538697666.725 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0347.lzma
2018-10-05T00:01:07.505Z,1538697667.505 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0347.lzma.bak
2018-10-05T00:01:07.505Z,1538697667.505 [DataOverHttps](INFO): SBD MOMSN=8611261
2018-10-05T00:01:08.488Z,1538697668.488 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T00:01:08.489Z,1538697668.489 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T00:01:08.489Z,1538697668.489 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T00:03:29.755Z,1538697809.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:03:29.755Z,1538697809.755 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2018-10-05T00:03:29.755Z,1538697809.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:03:29.761Z,1538697809.761 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:03:29.761Z,1538697809.761 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2018-10-05T00:03:29.761Z,1538697809.761 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:03:29.787Z,1538697809.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:03:29.787Z,1538697809.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:03:30.134Z,1538697810.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:03:30.135Z,1538697810.135 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2018-10-05T00:03:30.135Z,1538697810.135 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:03:30.135Z,1538697810.135 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2018-10-05T00:03:33.322Z,1538697813.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:03:33.323Z,1538697813.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:03:33.323Z,1538697813.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:03:33.324Z,1538697813.324 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:03:33.324Z,1538697813.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:03:33.324Z,1538697813.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:04:17.065Z,1538697857.065 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T00:04:17.065Z,1538697857.065 [NAL9602] Data Fault, FailCount= 3
2018-10-05T00:04:17.065Z,1538697857.065 [NAL9602](ERROR): Data Fault
2018-10-05T00:04:17.147Z,1538697857.147 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T00:04:17.459Z,1538697857.459 [NAL9602](INFO): Powering down
2018-10-05T00:04:18.307Z,1538697858.307 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T00:04:18.307Z,1538697858.307 [NAL9602] No Fault, FailCount= 3
2018-10-05T00:04:47.535Z,1538697887.535 [NAL9602](INFO): Powering up NAL9602
2018-10-05T00:04:58.735Z,1538697898.735 [NAL9602](INFO): NAL9602 initialized
2018-10-05T00:06:08.997Z,1538697968.997 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T00:06:08.997Z,1538697968.997 [Default:CheckIn:C.Wait] Stopped
2018-10-05T00:06:08.997Z,1538697968.997 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T00:06:08.998Z,1538697968.998 [Default:CheckIn:D] Running Loop=1
2018-10-05T00:06:09.376Z,1538697969.376 [Default:CheckIn:D] Stopped
2018-10-05T00:06:09.376Z,1538697969.376 [Default:CheckIn:E] Running Loop=1
2018-10-05T00:06:09.810Z,1538697969.810 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1189.693490 min 
2018-10-05T00:06:09.810Z,1538697969.810 [Default:CheckIn:E] Stopped
2018-10-05T00:06:09.810Z,1538697969.810 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T00:06:09.811Z,1538697969.811 [Default:CheckIn] Stopped
2018-10-05T00:06:09.811Z,1538697969.811 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T00:06:09.811Z,1538697969.811 [Default:CheckIn](INFO): Running loop #116
2018-10-05T00:06:09.811Z,1538697969.811 [Default:CheckIn] Running Loop=116
2018-10-05T00:06:09.811Z,1538697969.811 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T00:06:09.811Z,1538697969.811 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T00:06:33.749Z,1538697993.749 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:06:33.750Z,1538697993.750 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2018-10-05T00:06:33.750Z,1538697993.750 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:06:33.752Z,1538697993.752 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:06:33.752Z,1538697993.752 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2018-10-05T00:06:33.752Z,1538697993.752 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:06:33.788Z,1538697993.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:06:33.789Z,1538697993.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:06:34.144Z,1538697994.144 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:06:34.144Z,1538697994.144 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2018-10-05T00:06:34.144Z,1538697994.144 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:06:34.144Z,1538697994.144 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2018-10-05T00:06:34.501Z,1538697994.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:06:34.502Z,1538697994.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:06:34.502Z,1538697994.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:06:34.503Z,1538697994.503 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:06:34.503Z,1538697994.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:06:34.503Z,1538697994.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:09:34.658Z,1538698174.658 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:09:34.658Z,1538698174.658 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2018-10-05T00:09:34.658Z,1538698174.658 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:09:34.660Z,1538698174.660 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:09:34.660Z,1538698174.660 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2018-10-05T00:09:34.660Z,1538698174.660 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:09:34.713Z,1538698174.713 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:09:34.714Z,1538698174.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:09:35.073Z,1538698175.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:09:35.077Z,1538698175.077 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2018-10-05T00:09:35.077Z,1538698175.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:09:35.077Z,1538698175.077 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2018-10-05T00:09:35.431Z,1538698175.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:09:35.431Z,1538698175.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:09:35.432Z,1538698175.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:09:35.432Z,1538698175.432 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:09:35.432Z,1538698175.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:09:35.433Z,1538698175.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:11:11.997Z,1538698271.997 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T00:06:09.8Z
2018-10-05T00:11:12.001Z,1538698272.001 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T00:11:12.001Z,1538698272.001 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T00:11:16.920Z,1538698276.920 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0349.lzma
2018-10-05T00:11:17.702Z,1538698277.702 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0349.lzma.bak
2018-10-05T00:11:17.702Z,1538698277.702 [DataOverHttps](INFO): SBD MOMSN=8611265
2018-10-05T00:11:31.913Z,1538698291.913 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20181004T041305/Express0350.lzma
2018-10-05T00:11:32.712Z,1538698292.712 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0350.lzma.bak
2018-10-05T00:11:32.712Z,1538698292.712 [DataOverHttps](INFO): SBD MOMSN=8611267
2018-10-05T00:11:33.634Z,1538698293.634 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T00:11:33.634Z,1538698293.634 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T00:11:33.634Z,1538698293.634 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T00:12:35.796Z,1538698355.796 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:12:35.796Z,1538698355.796 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2018-10-05T00:12:35.797Z,1538698355.797 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:12:35.798Z,1538698355.798 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:12:35.799Z,1538698355.799 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2018-10-05T00:12:35.799Z,1538698355.799 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:12:35.824Z,1538698355.824 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:12:35.824Z,1538698355.824 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:12:36.236Z,1538698356.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:12:36.236Z,1538698356.236 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2018-10-05T00:12:36.236Z,1538698356.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:12:36.236Z,1538698356.236 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2018-10-05T00:12:36.595Z,1538698356.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:12:36.595Z,1538698356.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:12:36.595Z,1538698356.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:12:36.596Z,1538698356.596 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:12:36.596Z,1538698356.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:12:36.601Z,1538698356.601 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:15:02.020Z,1538698502.020 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T00:15:02.020Z,1538698502.020 [NAL9602] Data Fault, FailCount= 4
2018-10-05T00:15:02.020Z,1538698502.020 [NAL9602](ERROR): Data Fault
2018-10-05T00:15:02.093Z,1538698502.093 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T00:15:02.423Z,1538698502.423 [NAL9602](INFO): Powering down
2018-10-05T00:15:03.267Z,1538698503.267 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T00:15:03.267Z,1538698503.267 [NAL9602] No Fault, FailCount= 4
2018-10-05T00:15:32.495Z,1538698532.495 [NAL9602](INFO): Powering up NAL9602
2018-10-05T00:15:36.934Z,1538698536.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:15:36.934Z,1538698536.934 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2018-10-05T00:15:36.934Z,1538698536.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:15:36.936Z,1538698536.936 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:15:36.936Z,1538698536.936 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2018-10-05T00:15:36.936Z,1538698536.936 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:15:36.949Z,1538698536.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:15:36.950Z,1538698536.950 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:15:37.372Z,1538698537.372 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:15:37.372Z,1538698537.372 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2018-10-05T00:15:37.377Z,1538698537.377 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:15:37.377Z,1538698537.377 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2018-10-05T00:15:37.737Z,1538698537.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:15:37.738Z,1538698537.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:15:37.738Z,1538698537.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:15:37.739Z,1538698537.739 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:15:37.739Z,1538698537.739 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:15:37.739Z,1538698537.739 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:15:44.675Z,1538698544.675 [NAL9602](INFO): NAL9602 initialized
2018-10-05T00:16:33.977Z,1538698593.977 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T00:16:33.978Z,1538698593.978 [Default:CheckIn:C.Wait] Stopped
2018-10-05T00:16:33.978Z,1538698593.978 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T00:16:33.978Z,1538698593.978 [Default:CheckIn:D] Running Loop=1
2018-10-05T00:16:34.333Z,1538698594.333 [Default:CheckIn:D] Stopped
2018-10-05T00:16:34.334Z,1538698594.334 [Default:CheckIn:E] Running Loop=1
2018-10-05T00:16:34.757Z,1538698594.757 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1200.109375 min 
2018-10-05T00:16:34.757Z,1538698594.757 [Default:CheckIn:E] Stopped
2018-10-05T00:16:34.757Z,1538698594.757 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T00:16:34.757Z,1538698594.757 [Default:CheckIn] Stopped
2018-10-05T00:16:34.758Z,1538698594.758 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T00:16:34.758Z,1538698594.758 [Default:CheckIn](INFO): Running loop #117
2018-10-05T00:16:34.758Z,1538698594.758 [Default:CheckIn] Running Loop=117
2018-10-05T00:16:34.758Z,1538698594.758 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T00:16:34.758Z,1538698594.758 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T00:18:40.706Z,1538698720.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:18:40.706Z,1538698720.706 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2018-10-05T00:18:40.706Z,1538698720.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:18:40.708Z,1538698720.708 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:18:40.708Z,1538698720.708 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2018-10-05T00:18:40.708Z,1538698720.708 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:18:40.755Z,1538698720.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:18:40.755Z,1538698720.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:18:40.871Z,1538698720.871 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:18:40.871Z,1538698720.871 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2018-10-05T00:18:40.871Z,1538698720.871 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:18:40.871Z,1538698720.871 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2018-10-05T00:18:41.226Z,1538698721.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:18:41.226Z,1538698721.226 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:18:41.227Z,1538698721.227 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:18:41.227Z,1538698721.227 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:18:41.227Z,1538698721.227 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:18:41.228Z,1538698721.228 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:19:17.281Z,1538698757.281 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-05T00:21:37.789Z,1538698897.789 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T00:16:34.8Z
2018-10-05T00:21:37.789Z,1538698897.789 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T00:21:37.789Z,1538698897.789 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T00:21:44.098Z,1538698904.098 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0352.lzma
2018-10-05T00:21:44.189Z,1538698904.189 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:21:44.189Z,1538698904.189 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2018-10-05T00:21:44.189Z,1538698904.189 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:21:44.191Z,1538698904.191 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:21:44.191Z,1538698904.191 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2018-10-05T00:21:44.192Z,1538698904.192 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:21:44.204Z,1538698904.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:21:44.237Z,1538698904.237 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:21:44.355Z,1538698904.355 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:21:44.355Z,1538698904.355 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2018-10-05T00:21:44.356Z,1538698904.356 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:21:44.356Z,1538698904.356 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2018-10-05T00:21:44.661Z,1538698904.661 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0352.lzma.bak
2018-10-05T00:21:44.662Z,1538698904.662 [DataOverHttps](INFO): SBD MOMSN=8611271
2018-10-05T00:21:44.726Z,1538698904.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:21:44.726Z,1538698904.726 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:21:44.727Z,1538698904.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:21:44.727Z,1538698904.727 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:21:44.728Z,1538698904.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:21:44.728Z,1538698904.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:21:53.990Z,1538698913.990 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0353.lzma
2018-10-05T00:21:54.753Z,1538698914.753 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0353.lzma.bak
2018-10-05T00:21:54.753Z,1538698914.753 [DataOverHttps](INFO): SBD MOMSN=8611273
2018-10-05T00:21:55.688Z,1538698915.688 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T00:21:55.688Z,1538698915.688 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T00:21:55.688Z,1538698915.688 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T00:24:45.087Z,1538699085.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:24:45.088Z,1538699085.088 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2018-10-05T00:24:45.088Z,1538699085.088 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:24:45.090Z,1538699085.090 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:24:45.090Z,1538699085.090 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2018-10-05T00:24:45.090Z,1538699085.090 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:24:45.103Z,1538699085.103 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:24:45.103Z,1538699085.103 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:24:45.473Z,1538699085.473 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:24:45.474Z,1538699085.474 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2018-10-05T00:24:45.474Z,1538699085.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:24:45.474Z,1538699085.474 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2018-10-05T00:24:45.878Z,1538699085.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:24:45.879Z,1538699085.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:24:45.879Z,1538699085.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:24:45.879Z,1538699085.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:24:45.880Z,1538699085.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:24:45.880Z,1538699085.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:25:45.587Z,1538699145.587 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T00:25:45.587Z,1538699145.587 [NAL9602] Data Fault, FailCount= 5
2018-10-05T00:25:45.587Z,1538699145.587 [NAL9602](ERROR): Data Fault
2018-10-05T00:25:45.644Z,1538699145.644 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T00:25:45.644Z,1538699145.644 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T00:25:45.992Z,1538699145.992 [NAL9602](INFO): Powering down
2018-10-05T00:25:46.070Z,1538699146.070 [CBIT](INFO): Critical error at 20181005T002545
2018-10-05T00:26:55.821Z,1538699215.821 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T00:26:55.821Z,1538699215.821 [Default:CheckIn:C.Wait] Stopped
2018-10-05T00:26:55.821Z,1538699215.821 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T00:26:55.821Z,1538699215.821 [Default:CheckIn:D] Running Loop=1
2018-10-05T00:26:56.234Z,1538699216.234 [Default:CheckIn:D] Stopped
2018-10-05T00:26:56.234Z,1538699216.234 [Default:CheckIn:E] Running Loop=1
2018-10-05T00:26:56.621Z,1538699216.621 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1210.474479 min 
2018-10-05T00:26:56.621Z,1538699216.621 [Default:CheckIn:E] Stopped
2018-10-05T00:26:56.621Z,1538699216.621 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T00:26:56.621Z,1538699216.621 [Default:CheckIn] Stopped
2018-10-05T00:26:56.622Z,1538699216.622 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T00:26:56.622Z,1538699216.622 [Default:CheckIn](INFO): Running loop #118
2018-10-05T00:26:56.622Z,1538699216.622 [Default:CheckIn] Running Loop=118
2018-10-05T00:26:56.622Z,1538699216.622 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T00:26:56.622Z,1538699216.622 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T00:27:45.932Z,1538699265.932 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:27:45.932Z,1538699265.932 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2018-10-05T00:27:45.932Z,1538699265.932 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:27:45.938Z,1538699265.938 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:27:45.938Z,1538699265.938 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2018-10-05T00:27:45.938Z,1538699265.938 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:27:45.975Z,1538699265.975 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:27:45.975Z,1538699265.975 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:27:45.976Z,1538699265.976 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T00:27:45.976Z,1538699265.976 [NAL9602] No Fault, FailCount= 5
2018-10-05T00:27:46.295Z,1538699266.295 [NAL9602](INFO): Powering up NAL9602
2018-10-05T00:27:46.370Z,1538699266.370 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:27:46.370Z,1538699266.370 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2018-10-05T00:27:46.370Z,1538699266.370 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:27:46.371Z,1538699266.371 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2018-10-05T00:27:46.730Z,1538699266.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:27:46.731Z,1538699266.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:27:46.731Z,1538699266.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:27:46.731Z,1538699266.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:27:46.732Z,1538699266.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:27:46.732Z,1538699266.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:27:57.247Z,1538699277.247 [NAL9602](INFO): NAL9602 initialized
2018-10-05T00:28:04.103Z,1538699284.103 [RDI_Pathfinder](ERROR): DVL BIT error. See manual. Result code: 2768
2018-10-05T00:28:04.104Z,1538699284.104 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-05T00:30:48.350Z,1538699448.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:30:48.350Z,1538699448.350 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2018-10-05T00:30:48.350Z,1538699448.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:30:48.352Z,1538699448.352 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:30:48.352Z,1538699448.352 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2018-10-05T00:30:48.352Z,1538699448.352 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:30:48.365Z,1538699448.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:30:48.366Z,1538699448.366 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:30:48.481Z,1538699448.481 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:30:48.481Z,1538699448.481 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2018-10-05T00:30:48.482Z,1538699448.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:30:48.482Z,1538699448.482 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2018-10-05T00:30:48.852Z,1538699448.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:30:48.853Z,1538699448.853 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:30:48.857Z,1538699448.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:30:48.857Z,1538699448.857 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:30:48.858Z,1538699448.858 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:30:48.858Z,1538699448.858 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:31:59.069Z,1538699519.069 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T00:26:56.6Z
2018-10-05T00:31:59.070Z,1538699519.070 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T00:31:59.070Z,1538699519.070 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T00:32:04.195Z,1538699524.195 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0355.lzma
2018-10-05T00:32:04.957Z,1538699524.957 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0355.lzma.bak
2018-10-05T00:32:04.957Z,1538699524.957 [DataOverHttps](INFO): SBD MOMSN=8611277
2018-10-05T00:32:14.681Z,1538699534.681 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0356.lzma
2018-10-05T00:32:15.477Z,1538699535.477 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0356.lzma.bak
2018-10-05T00:32:15.477Z,1538699535.477 [DataOverHttps](INFO): SBD MOMSN=8611280
2018-10-05T00:32:16.440Z,1538699536.440 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T00:32:16.440Z,1538699536.440 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T00:32:16.440Z,1538699536.440 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T00:33:49.014Z,1538699629.014 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:33:49.014Z,1538699629.014 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2018-10-05T00:33:49.014Z,1538699629.014 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:33:49.016Z,1538699629.016 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:33:49.016Z,1538699629.016 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2018-10-05T00:33:49.016Z,1538699629.016 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:33:49.048Z,1538699629.048 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:33:49.053Z,1538699629.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:33:49.414Z,1538699629.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:33:49.414Z,1538699629.414 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2018-10-05T00:33:49.414Z,1538699629.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:33:49.415Z,1538699629.415 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2018-10-05T00:33:49.810Z,1538699629.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:33:49.810Z,1538699629.810 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:33:49.811Z,1538699629.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:33:49.811Z,1538699629.811 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:33:49.811Z,1538699629.811 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:33:49.812Z,1538699629.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:34:00.204Z,1538699640.204 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T00:36:50.047Z,1538699810.047 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:36:50.047Z,1538699810.047 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2018-10-05T00:36:50.047Z,1538699810.047 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:36:50.053Z,1538699810.053 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:36:50.053Z,1538699810.053 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2018-10-05T00:36:50.053Z,1538699810.053 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:36:50.083Z,1538699810.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:36:50.083Z,1538699810.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:36:50.474Z,1538699810.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:36:50.474Z,1538699810.474 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2018-10-05T00:36:50.475Z,1538699810.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:36:50.475Z,1538699810.475 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2018-10-05T00:36:50.890Z,1538699810.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:36:50.891Z,1538699810.891 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:36:50.891Z,1538699810.891 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:36:50.892Z,1538699810.892 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:36:50.892Z,1538699810.892 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:36:50.892Z,1538699810.892 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:37:16.965Z,1538699836.965 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T00:37:16.966Z,1538699836.966 [Default:CheckIn:C.Wait] Stopped
2018-10-05T00:37:16.966Z,1538699836.966 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T00:37:16.966Z,1538699836.966 [Default:CheckIn:D] Running Loop=1
2018-10-05T00:37:17.354Z,1538699837.354 [Default:CheckIn:D] Stopped
2018-10-05T00:37:17.354Z,1538699837.354 [Default:CheckIn:E] Running Loop=1
2018-10-05T00:37:17.759Z,1538699837.759 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1220.826432 min 
2018-10-05T00:37:17.759Z,1538699837.759 [Default:CheckIn:E] Stopped
2018-10-05T00:37:17.759Z,1538699837.759 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T00:37:17.759Z,1538699837.759 [Default:CheckIn] Stopped
2018-10-05T00:37:17.759Z,1538699837.759 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T00:37:17.760Z,1538699837.760 [Default:CheckIn](INFO): Running loop #119
2018-10-05T00:37:17.760Z,1538699837.760 [Default:CheckIn] Running Loop=119
2018-10-05T00:37:17.760Z,1538699837.760 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T00:37:17.760Z,1538699837.760 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T00:37:58.175Z,1538699878.175 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T00:37:58.176Z,1538699878.176 [NAL9602] Data Fault, FailCount= 1
2018-10-05T00:37:58.176Z,1538699878.176 [NAL9602](ERROR): Data Fault
2018-10-05T00:37:58.238Z,1538699878.238 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T00:37:58.567Z,1538699878.567 [NAL9602](INFO): Powering down
2018-10-05T00:37:59.419Z,1538699879.419 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T00:37:59.420Z,1538699879.420 [NAL9602] No Fault, FailCount= 1
2018-10-05T00:38:28.655Z,1538699908.655 [NAL9602](INFO): Powering up NAL9602
2018-10-05T00:38:39.847Z,1538699919.847 [NAL9602](INFO): NAL9602 initialized
2018-10-05T00:39:51.256Z,1538699991.256 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:39:51.256Z,1538699991.256 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2018-10-05T00:39:51.257Z,1538699991.257 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:39:51.259Z,1538699991.259 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:39:51.259Z,1538699991.259 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2018-10-05T00:39:51.259Z,1538699991.259 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:39:51.272Z,1538699991.272 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:39:51.273Z,1538699991.273 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:39:51.738Z,1538699991.738 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:39:51.738Z,1538699991.738 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2018-10-05T00:39:51.738Z,1538699991.738 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:39:51.739Z,1538699991.739 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2018-10-05T00:39:52.050Z,1538699992.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:39:52.051Z,1538699992.051 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:39:52.051Z,1538699992.051 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:39:52.051Z,1538699992.051 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:39:52.052Z,1538699992.052 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:39:52.052Z,1538699992.052 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:42:20.127Z,1538700140.127 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T00:37:17.8Z
2018-10-05T00:42:20.128Z,1538700140.128 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T00:42:20.128Z,1538700140.128 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T00:42:25.067Z,1538700145.067 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0358.lzma
2018-10-05T00:42:25.834Z,1538700145.834 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0358.lzma.bak
2018-10-05T00:42:25.834Z,1538700145.834 [DataOverHttps](INFO): SBD MOMSN=8611284
2018-10-05T00:42:35.033Z,1538700155.033 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0359.lzma
2018-10-05T00:42:35.817Z,1538700155.817 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0359.lzma.bak
2018-10-05T00:42:35.817Z,1538700155.817 [DataOverHttps](INFO): SBD MOMSN=8611286
2018-10-05T00:42:36.855Z,1538700156.855 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T00:42:36.855Z,1538700156.855 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T00:42:36.855Z,1538700156.855 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T00:42:52.235Z,1538700172.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:42:52.235Z,1538700172.235 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2018-10-05T00:42:52.235Z,1538700172.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:42:52.237Z,1538700172.237 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:42:52.237Z,1538700172.237 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2018-10-05T00:42:52.237Z,1538700172.237 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:42:52.259Z,1538700172.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:42:52.259Z,1538700172.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:42:52.679Z,1538700172.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:42:52.679Z,1538700172.679 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2018-10-05T00:42:52.679Z,1538700172.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:42:52.679Z,1538700172.679 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2018-10-05T00:42:53.046Z,1538700173.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:42:53.046Z,1538700173.046 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:42:53.047Z,1538700173.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:42:53.047Z,1538700173.047 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:42:53.047Z,1538700173.047 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:42:53.048Z,1538700173.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:45:53.442Z,1538700353.442 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:45:53.442Z,1538700353.442 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2018-10-05T00:45:53.442Z,1538700353.442 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:45:53.444Z,1538700353.444 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:45:53.444Z,1538700353.444 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2018-10-05T00:45:53.444Z,1538700353.444 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:45:53.473Z,1538700353.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:45:53.474Z,1538700353.474 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:45:53.900Z,1538700353.900 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:45:53.901Z,1538700353.901 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2018-10-05T00:45:53.901Z,1538700353.901 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:45:53.901Z,1538700353.901 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2018-10-05T00:45:54.257Z,1538700354.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:45:54.258Z,1538700354.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:45:54.258Z,1538700354.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:45:54.258Z,1538700354.258 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:45:54.259Z,1538700354.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:45:54.259Z,1538700354.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:47:37.364Z,1538700457.364 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T00:47:37.364Z,1538700457.364 [Default:CheckIn:C.Wait] Stopped
2018-10-05T00:47:37.364Z,1538700457.364 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T00:47:37.364Z,1538700457.364 [Default:CheckIn:D] Running Loop=1
2018-10-05T00:47:37.763Z,1538700457.763 [Default:CheckIn:D] Stopped
2018-10-05T00:47:37.764Z,1538700457.764 [Default:CheckIn:E] Running Loop=1
2018-10-05T00:47:38.173Z,1538700458.173 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1231.166536 min 
2018-10-05T00:47:38.173Z,1538700458.173 [Default:CheckIn:E] Stopped
2018-10-05T00:47:38.174Z,1538700458.174 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T00:47:38.174Z,1538700458.174 [Default:CheckIn] Stopped
2018-10-05T00:47:38.174Z,1538700458.174 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T00:47:38.174Z,1538700458.174 [Default:CheckIn](INFO): Running loop #120
2018-10-05T00:47:38.174Z,1538700458.174 [Default:CheckIn] Running Loop=120
2018-10-05T00:47:38.174Z,1538700458.174 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T00:47:38.174Z,1538700458.174 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T00:48:20.637Z,1538700500.637 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T00:48:20.638Z,1538700500.638 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00 +0.00,   0.00,30903.91
2018-10-05T00:48:40.675Z,1538700520.675 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T00:48:40.675Z,1538700520.675 [NAL9602] Data Fault, FailCount= 2
2018-10-05T00:48:40.675Z,1538700520.675 [NAL9602](ERROR): Data Fault
2018-10-05T00:48:40.770Z,1538700520.770 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T00:48:41.071Z,1538700521.071 [NAL9602](INFO): Powering down
2018-10-05T00:48:41.956Z,1538700521.956 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T00:48:41.956Z,1538700521.956 [NAL9602] No Fault, FailCount= 2
2018-10-05T00:48:54.302Z,1538700534.302 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:48:54.302Z,1538700534.302 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2018-10-05T00:48:54.302Z,1538700534.302 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:48:54.304Z,1538700534.304 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:48:54.304Z,1538700534.304 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2018-10-05T00:48:54.305Z,1538700534.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:48:54.347Z,1538700534.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:48:54.347Z,1538700534.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:48:54.743Z,1538700534.743 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:48:54.744Z,1538700534.744 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2018-10-05T00:48:54.744Z,1538700534.744 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:48:54.744Z,1538700534.744 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2018-10-05T00:48:55.143Z,1538700535.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:48:55.143Z,1538700535.143 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:48:55.143Z,1538700535.143 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:48:55.144Z,1538700535.144 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:48:55.144Z,1538700535.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:48:55.149Z,1538700535.149 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:49:11.171Z,1538700551.171 [NAL9602](INFO): Powering up NAL9602
2018-10-05T00:49:21.975Z,1538700561.975 [NAL9602](INFO): NAL9602 initialized
2018-10-05T00:50:23.022Z,1538700623.022 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.880, -0.001, 0.000
2018-10-05T00:51:55.436Z,1538700715.436 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:51:55.436Z,1538700715.436 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2018-10-05T00:51:55.436Z,1538700715.436 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:51:55.438Z,1538700715.438 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:51:55.438Z,1538700715.438 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2018-10-05T00:51:55.438Z,1538700715.438 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:51:55.471Z,1538700715.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:51:55.471Z,1538700715.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:51:55.850Z,1538700715.850 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:51:55.851Z,1538700715.851 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2018-10-05T00:51:55.851Z,1538700715.851 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:51:55.851Z,1538700715.851 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2018-10-05T00:51:56.247Z,1538700716.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:51:56.247Z,1538700716.247 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:51:56.248Z,1538700716.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:51:56.248Z,1538700716.248 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:51:56.253Z,1538700716.253 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:51:56.253Z,1538700716.253 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:52:39.943Z,1538700759.943 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T00:47:38.2Z
2018-10-05T00:52:39.943Z,1538700759.943 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T00:52:39.943Z,1538700759.943 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T00:52:44.940Z,1538700764.940 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0361.lzma
2018-10-05T00:52:45.848Z,1538700765.848 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0361.lzma.bak
2018-10-05T00:52:45.848Z,1538700765.848 [DataOverHttps](INFO): SBD MOMSN=8611290
2018-10-05T00:52:54.918Z,1538700774.918 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0362.lzma
2018-10-05T00:52:55.720Z,1538700775.720 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0362.lzma.bak
2018-10-05T00:52:55.720Z,1538700775.720 [DataOverHttps](INFO): SBD MOMSN=8611292
2018-10-05T00:52:57.002Z,1538700777.002 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T00:52:57.002Z,1538700777.002 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T00:52:57.002Z,1538700777.002 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T00:54:56.631Z,1538700896.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:54:56.631Z,1538700896.631 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2018-10-05T00:54:56.631Z,1538700896.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:54:56.637Z,1538700896.637 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:54:56.637Z,1538700896.637 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2018-10-05T00:54:56.638Z,1538700896.638 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:54:56.660Z,1538700896.660 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:54:56.660Z,1538700896.660 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:54:57.084Z,1538700897.084 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:54:57.084Z,1538700897.084 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2018-10-05T00:54:57.085Z,1538700897.085 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:54:57.085Z,1538700897.085 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2018-10-05T00:54:57.434Z,1538700897.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:54:57.435Z,1538700897.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:54:57.435Z,1538700897.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:54:57.435Z,1538700897.435 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:54:57.436Z,1538700897.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:54:57.436Z,1538700897.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:57:14.080Z,1538701034.080 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T00:57:14.080Z,1538701034.080 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,+     +0.00,         0.00,31435.87
2018-10-05T00:57:57.380Z,1538701077.380 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T00:57:57.381Z,1538701077.381 [Default:CheckIn:C.Wait] Stopped
2018-10-05T00:57:57.381Z,1538701077.381 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T00:57:57.381Z,1538701077.381 [Default:CheckIn:D] Running Loop=1
2018-10-05T00:57:57.768Z,1538701077.768 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:57:57.768Z,1538701077.768 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2018-10-05T00:57:57.768Z,1538701077.768 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T00:57:57.770Z,1538701077.770 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T00:57:57.771Z,1538701077.771 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2018-10-05T00:57:57.771Z,1538701077.771 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T00:57:57.773Z,1538701077.773 [Default:CheckIn:D] Stopped
2018-10-05T00:57:57.773Z,1538701077.773 [Default:CheckIn:E] Running Loop=1
2018-10-05T00:57:57.788Z,1538701077.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T00:57:57.788Z,1538701077.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T00:57:58.155Z,1538701078.155 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1241.500130 min 
2018-10-05T00:57:58.155Z,1538701078.155 [Default:CheckIn:E] Stopped
2018-10-05T00:57:58.156Z,1538701078.156 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T00:57:58.156Z,1538701078.156 [Default:CheckIn] Stopped
2018-10-05T00:57:58.156Z,1538701078.156 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T00:57:58.156Z,1538701078.156 [Default:CheckIn](INFO): Running loop #121
2018-10-05T00:57:58.156Z,1538701078.156 [Default:CheckIn] Running Loop=121
2018-10-05T00:57:58.156Z,1538701078.156 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T00:57:58.156Z,1538701078.156 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T00:57:58.203Z,1538701078.203 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T00:57:58.203Z,1538701078.203 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2018-10-05T00:57:58.203Z,1538701078.203 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T00:57:58.203Z,1538701078.203 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2018-10-05T00:57:58.556Z,1538701078.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T00:57:58.557Z,1538701078.557 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:57:58.557Z,1538701078.557 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:57:58.558Z,1538701078.558 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T00:57:58.558Z,1538701078.558 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T00:57:58.559Z,1538701078.559 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T00:59:23.107Z,1538701163.107 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T00:59:23.107Z,1538701163.107 [NAL9602] Data Fault, FailCount= 3
2018-10-05T00:59:23.107Z,1538701163.107 [NAL9602](ERROR): Data Fault
2018-10-05T00:59:23.173Z,1538701163.173 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T00:59:23.507Z,1538701163.507 [NAL9602](INFO): Powering down
2018-10-05T00:59:24.370Z,1538701164.370 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T00:59:24.371Z,1538701164.371 [NAL9602] No Fault, FailCount= 3
2018-10-05T00:59:53.647Z,1538701193.647 [NAL9602](INFO): Powering up NAL9602
2018-10-05T01:00:04.539Z,1538701204.539 [NAL9602](INFO): NAL9602 initialized
2018-10-05T01:00:58.693Z,1538701258.693 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:00:58.693Z,1538701258.693 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2018-10-05T01:00:58.694Z,1538701258.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:00:58.695Z,1538701258.695 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:00:58.696Z,1538701258.696 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2018-10-05T01:00:58.696Z,1538701258.696 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:00:58.725Z,1538701258.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:00:58.726Z,1538701258.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:00:59.088Z,1538701259.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:00:59.088Z,1538701259.088 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2018-10-05T01:00:59.088Z,1538701259.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:00:59.088Z,1538701259.088 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2018-10-05T01:00:59.466Z,1538701259.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:00:59.466Z,1538701259.466 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:00:59.467Z,1538701259.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:00:59.467Z,1538701259.467 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:00:59.468Z,1538701259.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:00:59.468Z,1538701259.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:02:58.171Z,1538701378.171 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T00:57:58.2Z
2018-10-05T01:02:58.171Z,1538701378.171 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T01:02:58.171Z,1538701378.171 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T01:03:01.888Z,1538701381.888 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0364.lzma
2018-10-05T01:03:02.425Z,1538701382.425 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0364.lzma.bak
2018-10-05T01:03:02.425Z,1538701382.425 [DataOverHttps](INFO): SBD MOMSN=8611296
2018-10-05T01:03:11.618Z,1538701391.618 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0365.lzma
2018-10-05T01:03:12.365Z,1538701392.365 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0365.lzma.bak
2018-10-05T01:03:12.365Z,1538701392.365 [DataOverHttps](INFO): SBD MOMSN=8611298
2018-10-05T01:03:13.330Z,1538701393.330 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T01:03:13.330Z,1538701393.330 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T01:03:13.330Z,1538701393.330 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T01:03:59.532Z,1538701439.532 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:03:59.532Z,1538701439.532 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2018-10-05T01:03:59.532Z,1538701439.532 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:03:59.535Z,1538701439.535 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:03:59.535Z,1538701439.535 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2018-10-05T01:03:59.535Z,1538701439.535 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:03:59.572Z,1538701439.572 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:03:59.572Z,1538701439.572 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:03:59.977Z,1538701439.977 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:03:59.981Z,1538701439.981 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2018-10-05T01:03:59.982Z,1538701439.982 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:03:59.982Z,1538701439.982 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2018-10-05T01:04:00.327Z,1538701440.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:04:00.327Z,1538701440.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:04:00.327Z,1538701440.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:04:00.328Z,1538701440.328 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:04:00.328Z,1538701440.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:04:00.329Z,1538701440.329 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:04:28.899Z,1538701468.899 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T01:05:20.612Z,1538701520.612 [RDI_Pathfinder](ERROR): Unknown system health message
2018-10-05T01:05:20.612Z,1538701520.612 [RDI_Pathfinder] Hardware Fault, FailCount= 1
2018-10-05T01:05:20.612Z,1538701520.612 [RDI_Pathfinder](ERROR): Hardware Fault
2018-10-05T01:05:20.668Z,1538701520.668 [CBIT](ERROR): Hardware Fault in component: RDI_Pathfinder
2018-10-05T01:05:21.037Z,1538701521.037 [RDI_Pathfinder](INFO): Powering down
2018-10-05T01:05:21.823Z,1538701521.823 [CBIT](INFO): Clearing failed state for component RDI_Pathfinder
2018-10-05T01:05:21.823Z,1538701521.823 [RDI_Pathfinder] No Fault, FailCount= 0
2018-10-05T01:05:38.205Z,1538701538.205 [RDI_Pathfinder](ERROR): Failed to parse:Pathfinder
2018-10-05T01:05:56.324Z,1538701556.324 [RDI_Pathfinder](ERROR): Failed to parse:
0e8c,0ffd, 15.887, -0.005, 0.000
2018-10-05T01:07:00.571Z,1538701620.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:07:00.571Z,1538701620.571 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2018-10-05T01:07:00.571Z,1538701620.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:07:00.573Z,1538701620.573 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:07:00.573Z,1538701620.573 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2018-10-05T01:07:00.573Z,1538701620.573 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:07:00.615Z,1538701620.615 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:07:00.615Z,1538701620.615 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:07:00.616Z,1538701620.616 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:07:00.616Z,1538701620.616 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:08:13.620Z,1538701693.620 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T01:08:13.620Z,1538701693.620 [Default:CheckIn:C.Wait] Stopped
2018-10-05T01:08:13.620Z,1538701693.620 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T01:08:13.620Z,1538701693.620 [Default:CheckIn:D] Running Loop=1
2018-10-05T01:08:14.003Z,1538701694.003 [Default:CheckIn:D] Stopped
2018-10-05T01:08:14.003Z,1538701694.003 [Default:CheckIn:E] Running Loop=1
2018-10-05T01:08:14.433Z,1538701694.433 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1251.770573 min 
2018-10-05T01:08:14.434Z,1538701694.434 [Default:CheckIn:E] Stopped
2018-10-05T01:08:14.434Z,1538701694.434 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T01:08:14.434Z,1538701694.434 [Default:CheckIn] Stopped
2018-10-05T01:08:14.434Z,1538701694.434 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T01:08:14.435Z,1538701694.435 [Default:CheckIn](INFO): Running loop #122
2018-10-05T01:08:14.435Z,1538701694.435 [Default:CheckIn] Running Loop=122
2018-10-05T01:08:14.435Z,1538701694.435 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T01:08:14.435Z,1538701694.435 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T01:10:05.987Z,1538701805.987 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T01:10:05.987Z,1538701805.987 [NAL9602] Data Fault, FailCount= 4
2018-10-05T01:10:05.987Z,1538701805.987 [NAL9602](ERROR): Data Fault
2018-10-05T01:10:06.079Z,1538701806.079 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T01:10:06.391Z,1538701806.391 [NAL9602](INFO): Powering down
2018-10-05T01:10:07.266Z,1538701807.266 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T01:10:07.266Z,1538701807.266 [NAL9602] No Fault, FailCount= 4
2018-10-05T01:10:36.455Z,1538701836.455 [NAL9602](INFO): Powering up NAL9602
2018-10-05T01:10:47.268Z,1538701847.268 [NAL9602](INFO): NAL9602 initialized
2018-10-05T01:13:17.318Z,1538701997.318 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T01:08:14.4Z
2018-10-05T01:13:17.318Z,1538701997.318 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T01:13:17.318Z,1538701997.318 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T01:13:22.317Z,1538702002.317 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0367.lzma
2018-10-05T01:13:23.085Z,1538702003.085 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0367.lzma.bak
2018-10-05T01:13:23.085Z,1538702003.085 [DataOverHttps](INFO): SBD MOMSN=8611302
2018-10-05T01:13:24.019Z,1538702004.019 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T01:13:32.660Z,1538702012.660 [DataOverHttps](INFO): Sending 222 bytes from file Logs/20181004T041305/Express0368.lzma
2018-10-05T01:13:33.431Z,1538702013.431 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0368.lzma.bak
2018-10-05T01:13:33.431Z,1538702013.431 [DataOverHttps](INFO): SBD MOMSN=8611304
2018-10-05T01:13:34.351Z,1538702014.351 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T01:13:34.351Z,1538702014.351 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T01:13:34.351Z,1538702014.351 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T01:18:34.568Z,1538702314.568 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T01:18:34.568Z,1538702314.568 [Default:CheckIn:C.Wait] Stopped
2018-10-05T01:18:34.568Z,1538702314.568 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T01:18:34.568Z,1538702314.568 [Default:CheckIn:D] Running Loop=1
2018-10-05T01:18:34.963Z,1538702314.963 [Default:CheckIn:D] Stopped
2018-10-05T01:18:34.963Z,1538702314.963 [Default:CheckIn:E] Running Loop=1
2018-10-05T01:18:35.402Z,1538702315.402 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1262.119922 min 
2018-10-05T01:18:35.403Z,1538702315.403 [Default:CheckIn:E] Stopped
2018-10-05T01:18:35.403Z,1538702315.403 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T01:18:35.403Z,1538702315.403 [Default:CheckIn] Stopped
2018-10-05T01:18:35.403Z,1538702315.403 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T01:18:35.403Z,1538702315.403 [Default:CheckIn](INFO): Running loop #123
2018-10-05T01:18:35.403Z,1538702315.403 [Default:CheckIn] Running Loop=123
2018-10-05T01:18:35.403Z,1538702315.403 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T01:18:35.404Z,1538702315.404 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T01:20:49.647Z,1538702449.647 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T01:20:49.647Z,1538702449.647 [NAL9602] Data Fault, FailCount= 5
2018-10-05T01:20:49.647Z,1538702449.647 [NAL9602](ERROR): Data Fault
2018-10-05T01:20:49.696Z,1538702449.696 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T01:20:49.697Z,1538702449.697 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T01:20:50.052Z,1538702450.052 [NAL9602](INFO): Powering down
2018-10-05T01:20:50.140Z,1538702450.140 [CBIT](INFO): Critical error at 20181005T012049
2018-10-05T01:22:00.647Z,1538702520.647 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:22:00.647Z,1538702520.647 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2018-10-05T01:22:00.647Z,1538702520.647 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:22:00.647Z,1538702520.647 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2018-10-05T01:22:01.014Z,1538702521.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:22:01.015Z,1538702521.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:22:01.015Z,1538702521.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:22:01.015Z,1538702521.015 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:22:01.016Z,1538702521.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:22:01.016Z,1538702521.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:22:49.999Z,1538702569.999 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T01:22:49.000Z,1538702570.000 [NAL9602] No Fault, FailCount= 5
2018-10-05T01:22:50.335Z,1538702570.335 [NAL9602](INFO): Powering up NAL9602
2018-10-05T01:23:03.378Z,1538702583.378 [NAL9602](INFO): NAL9602 initialized
2018-10-05T01:23:37.795Z,1538702617.795 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T01:18:35.4Z
2018-10-05T01:23:37.795Z,1538702617.795 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T01:23:37.795Z,1538702617.795 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T01:23:42.752Z,1538702622.752 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0370.lzma
2018-10-05T01:23:43.531Z,1538702623.531 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0370.lzma.bak
2018-10-05T01:23:43.531Z,1538702623.531 [DataOverHttps](INFO): SBD MOMSN=8611310
2018-10-05T01:23:56.654Z,1538702636.654 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0371.lzma
2018-10-05T01:23:57.236Z,1538702637.236 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0371.lzma.bak
2018-10-05T01:23:57.237Z,1538702637.237 [DataOverHttps](INFO): SBD MOMSN=8611313
2018-10-05T01:23:58.203Z,1538702638.203 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T01:23:58.203Z,1538702638.203 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T01:23:58.203Z,1538702638.203 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T01:25:01.354Z,1538702701.354 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:25:01.355Z,1538702701.355 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-10-05T01:25:01.355Z,1538702701.355 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:25:01.357Z,1538702701.357 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:25:01.357Z,1538702701.357 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-05T01:25:01.357Z,1538702701.357 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:25:01.382Z,1538702701.382 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:25:01.383Z,1538702701.383 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:25:01.756Z,1538702701.756 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:25:01.756Z,1538702701.756 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-10-05T01:25:01.761Z,1538702701.761 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:25:01.761Z,1538702701.761 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-05T01:25:02.122Z,1538702702.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:25:02.122Z,1538702702.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:25:02.122Z,1538702702.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:25:02.123Z,1538702702.123 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:25:02.123Z,1538702702.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:25:02.124Z,1538702702.124 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:28:02.421Z,1538702882.421 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:28:02.421Z,1538702882.421 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-10-05T01:28:02.421Z,1538702882.421 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:28:02.423Z,1538702882.423 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:28:02.423Z,1538702882.423 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-05T01:28:02.423Z,1538702882.423 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:28:02.449Z,1538702882.449 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:28:02.449Z,1538702882.449 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:28:02.827Z,1538702882.827 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:28:02.827Z,1538702882.827 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-10-05T01:28:02.828Z,1538702882.828 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:28:02.828Z,1538702882.828 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-05T01:28:03.214Z,1538702883.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:28:03.214Z,1538702883.214 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:28:03.215Z,1538702883.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:28:03.215Z,1538702883.215 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:28:03.216Z,1538702883.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:28:03.216Z,1538702883.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:28:58.649Z,1538702938.649 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T01:28:58.649Z,1538702938.649 [Default:CheckIn:C.Wait] Stopped
2018-10-05T01:28:58.649Z,1538702938.649 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T01:28:58.649Z,1538702938.649 [Default:CheckIn:D] Running Loop=1
2018-10-05T01:28:59.065Z,1538702939.065 [Default:CheckIn:D] Stopped
2018-10-05T01:28:59.065Z,1538702939.065 [Default:CheckIn:E] Running Loop=1
2018-10-05T01:28:59.455Z,1538702939.455 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1272.521615 min 
2018-10-05T01:28:59.456Z,1538702939.456 [Default:CheckIn:E] Stopped
2018-10-05T01:28:59.456Z,1538702939.456 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T01:28:59.456Z,1538702939.456 [Default:CheckIn] Stopped
2018-10-05T01:28:59.456Z,1538702939.456 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T01:28:59.456Z,1538702939.456 [Default:CheckIn](INFO): Running loop #124
2018-10-05T01:28:59.456Z,1538702939.456 [Default:CheckIn] Running Loop=124
2018-10-05T01:28:59.456Z,1538702939.456 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T01:28:59.457Z,1538702939.457 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T01:31:05.309Z,1538703065.309 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:31:05.309Z,1538703065.309 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-10-05T01:31:05.309Z,1538703065.309 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:31:05.311Z,1538703065.311 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:31:05.311Z,1538703065.311 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-05T01:31:05.311Z,1538703065.311 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:31:05.324Z,1538703065.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:31:05.324Z,1538703065.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:31:05.455Z,1538703065.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:31:05.455Z,1538703065.455 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-10-05T01:31:05.455Z,1538703065.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:31:05.455Z,1538703065.455 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-05T01:31:05.801Z,1538703065.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:31:05.802Z,1538703065.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:31:05.802Z,1538703065.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:31:05.802Z,1538703065.802 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:31:05.803Z,1538703065.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:31:05.803Z,1538703065.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:33:06.795Z,1538703186.795 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T01:33:06.795Z,1538703186.795 [NAL9602] Data Fault, FailCount= 1
2018-10-05T01:33:06.795Z,1538703186.795 [NAL9602](ERROR): Data Fault
2018-10-05T01:33:06.872Z,1538703186.872 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T01:33:07.195Z,1538703187.195 [NAL9602](INFO): Powering down
2018-10-05T01:33:08.081Z,1538703188.081 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T01:33:08.081Z,1538703188.081 [NAL9602] No Fault, FailCount= 1
2018-10-05T01:33:37.295Z,1538703217.295 [NAL9602](INFO): Powering up NAL9602
2018-10-05T01:33:48.095Z,1538703228.095 [NAL9602](INFO): NAL9602 initialized
2018-10-05T01:34:01.738Z,1538703241.738 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T01:28:59.5Z
2018-10-05T01:34:01.738Z,1538703241.738 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T01:34:01.738Z,1538703241.738 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T01:34:06.590Z,1538703246.590 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:34:06.591Z,1538703246.591 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-10-05T01:34:06.591Z,1538703246.591 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:34:06.592Z,1538703246.592 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:34:06.593Z,1538703246.593 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-05T01:34:06.593Z,1538703246.593 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:34:06.626Z,1538703246.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:34:06.626Z,1538703246.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:34:06.682Z,1538703246.682 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0373.lzma
2018-10-05T01:34:06.755Z,1538703246.755 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:34:06.755Z,1538703246.755 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-10-05T01:34:06.755Z,1538703246.755 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:34:06.756Z,1538703246.756 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-05T01:34:07.107Z,1538703247.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:34:07.107Z,1538703247.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:34:07.108Z,1538703247.108 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:34:07.108Z,1538703247.108 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:34:07.108Z,1538703247.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:34:07.109Z,1538703247.109 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:34:07.441Z,1538703247.441 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0373.lzma.bak
2018-10-05T01:34:07.441Z,1538703247.441 [DataOverHttps](INFO): SBD MOMSN=8611317
2018-10-05T01:34:17.060Z,1538703257.060 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0374.lzma
2018-10-05T01:34:17.813Z,1538703257.813 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0374.lzma.bak
2018-10-05T01:34:17.813Z,1538703257.813 [DataOverHttps](INFO): SBD MOMSN=8611319
2018-10-05T01:34:18.750Z,1538703258.750 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T01:34:18.750Z,1538703258.750 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T01:34:18.750Z,1538703258.750 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T01:35:22.292Z,1538703322.292 [BPC1](ERROR): BPC1A: No match for stick with serial number:1717 in the onboard configuration file.
2018-10-05T01:36:10.458Z,1538703370.458 [RDI_Pathfinder](ERROR): only read 4 of 5 data items
2018-10-05T01:36:10.459Z,1538703370.459 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32BS,-32768,-32768,-32768,V
2018-10-05T01:37:07.122Z,1538703427.122 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:37:07.122Z,1538703427.122 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-10-05T01:37:07.122Z,1538703427.122 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:37:07.124Z,1538703427.124 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:37:07.124Z,1538703427.124 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-05T01:37:07.124Z,1538703427.124 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:37:07.150Z,1538703427.150 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:37:07.150Z,1538703427.150 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:37:07.523Z,1538703427.523 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:37:07.523Z,1538703427.523 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-10-05T01:37:07.523Z,1538703427.523 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:37:07.523Z,1538703427.523 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-05T01:37:07.894Z,1538703427.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:37:07.895Z,1538703427.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:37:07.895Z,1538703427.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:37:07.896Z,1538703427.896 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:37:07.896Z,1538703427.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:37:07.896Z,1538703427.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:37:12.307Z,1538703432.307 [RDI_Pathfinder](ERROR): only read 4 of 5 data items
2018-10-05T01:37:12.307Z,1538703432.307 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-3
2018-10-05T01:38:30.356Z,1538703510.356 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8b,0ffd, 15.887, -0.008, 0.000
2018-10-05T01:39:18.931Z,1538703558.931 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T01:39:18.931Z,1538703558.931 [Default:CheckIn:C.Wait] Stopped
2018-10-05T01:39:18.931Z,1538703558.931 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T01:39:18.931Z,1538703558.931 [Default:CheckIn:D] Running Loop=1
2018-10-05T01:39:19.322Z,1538703559.322 [Default:CheckIn:D] Stopped
2018-10-05T01:39:19.322Z,1538703559.322 [Default:CheckIn:E] Running Loop=1
2018-10-05T01:39:19.713Z,1538703559.713 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1282.859245 min 
2018-10-05T01:39:19.713Z,1538703559.713 [Default:CheckIn:E] Stopped
2018-10-05T01:39:19.714Z,1538703559.714 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T01:39:19.714Z,1538703559.714 [Default:CheckIn] Stopped
2018-10-05T01:39:19.714Z,1538703559.714 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T01:39:19.714Z,1538703559.714 [Default:CheckIn](INFO): Running loop #125
2018-10-05T01:39:19.714Z,1538703559.714 [Default:CheckIn] Running Loop=125
2018-10-05T01:39:19.714Z,1538703559.714 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T01:39:19.714Z,1538703559.714 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T01:40:08.259Z,1538703608.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:40:08.260Z,1538703608.260 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-10-05T01:40:08.260Z,1538703608.260 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:40:08.270Z,1538703608.270 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:40:08.270Z,1538703608.270 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-05T01:40:08.270Z,1538703608.270 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:40:08.299Z,1538703608.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:40:08.299Z,1538703608.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:40:08.671Z,1538703608.671 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:40:08.671Z,1538703608.671 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-10-05T01:40:08.671Z,1538703608.671 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:40:08.671Z,1538703608.671 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-05T01:40:09.063Z,1538703609.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:40:09.064Z,1538703609.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:40:09.064Z,1538703609.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:40:09.065Z,1538703609.065 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:40:09.070Z,1538703609.070 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:40:09.071Z,1538703609.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:41:28.402Z,1538703688.402 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T01:43:11.453Z,1538703791.453 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:43:11.453Z,1538703791.453 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-10-05T01:43:11.453Z,1538703791.453 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:43:11.455Z,1538703791.455 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:43:11.455Z,1538703791.455 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-05T01:43:11.455Z,1538703791.455 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:43:11.468Z,1538703791.468 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:43:11.469Z,1538703791.469 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:43:11.626Z,1538703791.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:43:11.626Z,1538703791.626 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-10-05T01:43:11.627Z,1538703791.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:43:11.627Z,1538703791.627 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-05T01:43:11.950Z,1538703791.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:43:11.950Z,1538703791.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:43:11.951Z,1538703791.951 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:43:11.951Z,1538703791.951 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:43:11.951Z,1538703791.951 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:43:11.952Z,1538703791.952 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:43:51.189Z,1538703831.189 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T01:43:51.189Z,1538703831.189 [NAL9602] Data Fault, FailCount= 2
2018-10-05T01:43:51.189Z,1538703831.189 [NAL9602](ERROR): Data Fault
2018-10-05T01:43:51.273Z,1538703831.273 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T01:43:51.591Z,1538703831.591 [NAL9602](INFO): Powering down
2018-10-05T01:43:52.454Z,1538703832.454 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T01:43:52.454Z,1538703832.454 [NAL9602] No Fault, FailCount= 2
2018-10-05T01:44:21.959Z,1538703861.959 [NAL9602](INFO): Powering up NAL9602
2018-10-05T01:44:22.022Z,1538703862.022 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T01:39:19.7Z
2018-10-05T01:44:22.022Z,1538703862.022 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T01:44:22.022Z,1538703862.022 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T01:44:26.970Z,1538703866.970 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0376.lzma
2018-10-05T01:44:27.749Z,1538703867.749 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0376.lzma.bak
2018-10-05T01:44:27.750Z,1538703867.750 [DataOverHttps](INFO): SBD MOMSN=8611323
2018-10-05T01:44:32.799Z,1538703872.799 [NAL9602](INFO): NAL9602 initialized
2018-10-05T01:44:37.353Z,1538703877.353 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0377.lzma
2018-10-05T01:44:41.667Z,1538703881.667 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0377.lzma.bak
2018-10-05T01:44:41.668Z,1538703881.668 [DataOverHttps](INFO): SBD MOMSN=8611325
2018-10-05T01:44:42.419Z,1538703882.419 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T01:44:42.419Z,1538703882.419 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T01:44:42.419Z,1538703882.419 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T01:46:11.991Z,1538703971.991 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:46:11.991Z,1538703971.991 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-10-05T01:46:11.991Z,1538703971.991 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:46:11.997Z,1538703971.997 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:46:11.997Z,1538703971.997 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-05T01:46:11.997Z,1538703971.997 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:46:12.023Z,1538703972.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:46:12.023Z,1538703972.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:46:12.434Z,1538703972.434 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:46:12.434Z,1538703972.434 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-10-05T01:46:12.435Z,1538703972.435 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:46:12.435Z,1538703972.435 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-05T01:46:12.804Z,1538703972.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:46:12.805Z,1538703972.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:46:12.805Z,1538703972.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:46:12.805Z,1538703972.805 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:46:12.806Z,1538703972.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:46:12.806Z,1538703972.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:47:35.473Z,1538704055.473 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.887, -0.008, 0.000
2018-10-05T01:49:12.931Z,1538704152.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:49:12.931Z,1538704152.931 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-10-05T01:49:12.931Z,1538704152.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:49:12.953Z,1538704152.953 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:49:12.953Z,1538704152.953 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-05T01:49:12.953Z,1538704152.953 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:49:12.981Z,1538704152.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:49:12.982Z,1538704152.982 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:49:13.350Z,1538704153.350 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:49:13.350Z,1538704153.350 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-10-05T01:49:13.351Z,1538704153.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:49:13.351Z,1538704153.351 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-05T01:49:13.762Z,1538704153.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:49:13.762Z,1538704153.762 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:49:13.762Z,1538704153.762 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:49:13.763Z,1538704153.763 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:49:13.763Z,1538704153.763 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:49:13.764Z,1538704153.764 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:49:32.252Z,1538704172.252 [RDI_Pathfinder](ERROR): Failed to parse:     +0.00,        +0.00,        +0.00,   0.00,2636.73
2018-10-05T01:49:42.656Z,1538704182.656 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T01:49:42.656Z,1538704182.656 [Default:CheckIn:C.Wait] Stopped
2018-10-05T01:49:42.656Z,1538704182.656 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T01:49:42.656Z,1538704182.656 [Default:CheckIn:D] Running Loop=1
2018-10-05T01:49:43.040Z,1538704183.040 [Default:CheckIn:D] Stopped
2018-10-05T01:49:43.040Z,1538704183.040 [Default:CheckIn:E] Running Loop=1
2018-10-05T01:49:43.461Z,1538704183.461 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1293.254557 min 
2018-10-05T01:49:43.461Z,1538704183.461 [Default:CheckIn:E] Stopped
2018-10-05T01:49:43.462Z,1538704183.462 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T01:49:43.462Z,1538704183.462 [Default:CheckIn] Stopped
2018-10-05T01:49:43.462Z,1538704183.462 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T01:49:43.462Z,1538704183.462 [Default:CheckIn](INFO): Running loop #126
2018-10-05T01:49:43.462Z,1538704183.462 [Default:CheckIn] Running Loop=126
2018-10-05T01:49:43.462Z,1538704183.462 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T01:49:43.462Z,1538704183.462 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T01:51:52.613Z,1538704312.613 [RDI_Pathfinder](ERROR): DVL BIT error. See manual. Result code: -3768
2018-10-05T01:51:52.614Z,1538704312.614 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-05T01:51:53.810Z,1538704313.810 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T01:51:53.810Z,1538704313.810 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00 +0.00,   0.00,2777.70
2018-10-05T01:52:13.811Z,1538704333.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:52:13.811Z,1538704333.811 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-10-05T01:52:13.811Z,1538704333.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:52:13.813Z,1538704333.813 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:52:13.813Z,1538704333.813 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-05T01:52:13.813Z,1538704333.813 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:52:13.826Z,1538704333.826 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:52:13.827Z,1538704333.827 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:52:14.210Z,1538704334.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:52:14.210Z,1538704334.210 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-10-05T01:52:14.211Z,1538704334.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:52:14.211Z,1538704334.211 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-05T01:52:14.613Z,1538704334.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:52:14.613Z,1538704334.613 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:52:14.614Z,1538704334.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:52:14.614Z,1538704334.614 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:52:14.615Z,1538704334.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:52:14.615Z,1538704334.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:54:36.079Z,1538704476.079 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T01:54:36.079Z,1538704476.079 [NAL9602] Data Fault, FailCount= 3
2018-10-05T01:54:36.079Z,1538704476.079 [NAL9602](ERROR): Data Fault
2018-10-05T01:54:36.164Z,1538704476.164 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T01:54:36.475Z,1538704476.475 [NAL9602](INFO): Powering down
2018-10-05T01:54:37.339Z,1538704477.339 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T01:54:37.339Z,1538704477.339 [NAL9602] No Fault, FailCount= 3
2018-10-05T01:54:45.713Z,1538704485.713 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T01:49:43.5Z
2018-10-05T01:54:45.713Z,1538704485.713 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T01:54:45.713Z,1538704485.713 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T01:54:50.629Z,1538704490.629 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0379.lzma
2018-10-05T01:54:51.405Z,1538704491.405 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0379.lzma.bak
2018-10-05T01:54:51.405Z,1538704491.405 [DataOverHttps](INFO): SBD MOMSN=8611329
2018-10-05T01:55:01.002Z,1538704501.002 [DataOverHttps](INFO): Sending 149 bytes from file Logs/20181004T041305/Express0380.lzma
2018-10-05T01:55:01.790Z,1538704501.790 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0380.lzma.bak
2018-10-05T01:55:01.790Z,1538704501.790 [DataOverHttps](INFO): SBD MOMSN=8611331
2018-10-05T01:55:02.740Z,1538704502.740 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T01:55:02.740Z,1538704502.740 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T01:55:02.740Z,1538704502.740 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T01:55:06.539Z,1538704506.539 [NAL9602](INFO): Powering up NAL9602
2018-10-05T01:55:07.356Z,1538704507.356 [RDI_Pathfinder](ERROR): Failed to parse:
:BE,-32768,-32768,-32768,V
2018-10-05T01:55:14.963Z,1538704514.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:55:14.963Z,1538704514.963 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-10-05T01:55:14.963Z,1538704514.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:55:14.965Z,1538704514.965 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:55:14.965Z,1538704514.965 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-05T01:55:14.966Z,1538704514.966 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:55:14.996Z,1538704514.996 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:55:14.996Z,1538704514.996 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:55:15.400Z,1538704515.400 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:55:15.400Z,1538704515.400 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-10-05T01:55:15.400Z,1538704515.400 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:55:15.400Z,1538704515.400 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-05T01:55:15.766Z,1538704515.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:55:15.766Z,1538704515.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:55:15.767Z,1538704515.767 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:55:15.767Z,1538704515.767 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:55:15.767Z,1538704515.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:55:15.768Z,1538704515.768 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:55:17.727Z,1538704517.727 [NAL9602](INFO): NAL9602 initialized
2018-10-05T01:58:15.872Z,1538704695.872 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:58:15.873Z,1538704695.873 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-10-05T01:58:15.873Z,1538704695.873 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T01:58:15.875Z,1538704695.875 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T01:58:15.875Z,1538704695.875 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-05T01:58:15.875Z,1538704695.875 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T01:58:15.901Z,1538704695.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T01:58:15.909Z,1538704695.909 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T01:58:16.302Z,1538704696.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T01:58:16.302Z,1538704696.302 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-10-05T01:58:16.302Z,1538704696.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T01:58:16.302Z,1538704696.302 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-05T01:58:16.688Z,1538704696.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T01:58:16.688Z,1538704696.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:58:16.689Z,1538704696.689 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T01:58:16.689Z,1538704696.689 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T01:58:16.690Z,1538704696.690 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T01:58:16.690Z,1538704696.690 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:00:02.941Z,1538704802.941 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T02:00:02.941Z,1538704802.941 [Default:CheckIn:C.Wait] Stopped
2018-10-05T02:00:02.941Z,1538704802.941 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T02:00:02.942Z,1538704802.942 [Default:CheckIn:D] Running Loop=1
2018-10-05T02:00:03.365Z,1538704803.365 [Default:CheckIn:D] Stopped
2018-10-05T02:00:03.366Z,1538704803.366 [Default:CheckIn:E] Running Loop=1
2018-10-05T02:00:03.767Z,1538704803.767 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1303.592708 min 
2018-10-05T02:00:03.767Z,1538704803.767 [Default:CheckIn:E] Stopped
2018-10-05T02:00:03.768Z,1538704803.768 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T02:00:03.768Z,1538704803.768 [Default:CheckIn] Stopped
2018-10-05T02:00:03.768Z,1538704803.768 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T02:00:03.768Z,1538704803.768 [Default:CheckIn](INFO): Running loop #127
2018-10-05T02:00:03.768Z,1538704803.768 [Default:CheckIn] Running Loop=127
2018-10-05T02:00:03.768Z,1538704803.768 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T02:00:03.768Z,1538704803.768 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T02:01:16.755Z,1538704876.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:01:16.756Z,1538704876.756 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-10-05T02:01:16.756Z,1538704876.756 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:01:16.762Z,1538704876.762 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:01:16.762Z,1538704876.762 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-05T02:01:16.762Z,1538704876.762 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:01:16.792Z,1538704876.792 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:01:16.792Z,1538704876.792 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:01:17.205Z,1538704877.205 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:01:17.205Z,1538704877.205 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-10-05T02:01:17.205Z,1538704877.205 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:01:17.206Z,1538704877.206 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-05T02:01:17.574Z,1538704877.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:01:17.574Z,1538704877.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:01:17.574Z,1538704877.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:01:17.575Z,1538704877.575 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:01:17.575Z,1538704877.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:01:17.576Z,1538704877.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:03:21.356Z,1538705001.356 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,3464.53
2018-10-05T02:04:17.871Z,1538705057.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:04:17.871Z,1538705057.871 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-10-05T02:04:17.871Z,1538705057.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:04:17.877Z,1538705057.877 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:04:17.877Z,1538705057.877 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-05T02:04:17.877Z,1538705057.877 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:04:17.899Z,1538705057.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:04:17.899Z,1538705057.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:04:18.299Z,1538705058.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:04:18.300Z,1538705058.300 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-10-05T02:04:18.300Z,1538705058.300 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:04:18.300Z,1538705058.300 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-05T02:04:18.666Z,1538705058.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:04:18.666Z,1538705058.666 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:04:18.667Z,1538705058.667 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:04:18.667Z,1538705058.667 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:04:18.668Z,1538705058.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:04:18.668Z,1538705058.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:05:06.038Z,1538705106.038 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T02:00:03.8Z
2018-10-05T02:05:06.039Z,1538705106.039 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T02:05:06.039Z,1538705106.039 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T02:05:11.102Z,1538705111.102 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0382.lzma
2018-10-05T02:05:11.861Z,1538705111.861 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0382.lzma.bak
2018-10-05T02:05:11.862Z,1538705111.862 [DataOverHttps](INFO): SBD MOMSN=8611335
2018-10-05T02:05:21.081Z,1538705121.081 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20181004T041305/Express0383.lzma
2018-10-05T02:05:21.436Z,1538705121.436 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T02:05:21.437Z,1538705121.437 [NAL9602] Data Fault, FailCount= 4
2018-10-05T02:05:21.437Z,1538705121.437 [NAL9602](ERROR): Data Fault
2018-10-05T02:05:21.503Z,1538705121.503 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T02:05:21.826Z,1538705121.826 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0383.lzma.bak
2018-10-05T02:05:21.826Z,1538705121.826 [DataOverHttps](INFO): SBD MOMSN=8611337
2018-10-05T02:05:21.839Z,1538705121.839 [NAL9602](INFO): Powering down
2018-10-05T02:05:22.759Z,1538705122.759 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T02:05:22.759Z,1538705122.759 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T02:05:22.759Z,1538705122.759 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T02:05:22.908Z,1538705122.908 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T02:05:22.908Z,1538705122.908 [NAL9602] No Fault, FailCount= 4
2018-10-05T02:05:27.326Z,1538705127.326 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe, 15.786, -0.005, 0.000
2018-10-05T02:05:52.112Z,1538705152.112 [NAL9602](INFO): Powering up NAL9602
2018-10-05T02:06:03.003Z,1538705163.003 [NAL9602](INFO): NAL9602 initialized
2018-10-05T02:07:18.835Z,1538705238.835 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:07:18.835Z,1538705238.835 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-10-05T02:07:18.835Z,1538705238.835 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:07:18.841Z,1538705238.841 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:07:18.841Z,1538705238.841 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-05T02:07:18.841Z,1538705238.841 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:07:18.867Z,1538705238.867 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:07:18.867Z,1538705238.867 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:07:19.282Z,1538705239.282 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:07:19.282Z,1538705239.282 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-10-05T02:07:19.282Z,1538705239.282 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:07:19.283Z,1538705239.283 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-05T02:07:19.606Z,1538705239.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:07:19.607Z,1538705239.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:07:19.607Z,1538705239.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:07:19.608Z,1538705239.608 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:07:19.608Z,1538705239.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:07:19.608Z,1538705239.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:10:19.723Z,1538705419.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:10:19.723Z,1538705419.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-10-05T02:10:19.723Z,1538705419.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:10:19.725Z,1538705419.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:10:19.725Z,1538705419.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-05T02:10:19.726Z,1538705419.726 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:10:19.747Z,1538705419.747 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:10:19.747Z,1538705419.747 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:10:20.150Z,1538705420.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:10:20.150Z,1538705420.150 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-10-05T02:10:20.151Z,1538705420.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:10:20.151Z,1538705420.151 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-05T02:10:20.524Z,1538705420.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:10:20.525Z,1538705420.525 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:10:20.525Z,1538705420.525 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:10:20.526Z,1538705420.526 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:10:20.526Z,1538705420.526 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:10:20.527Z,1538705420.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:10:22.925Z,1538705422.925 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T02:10:22.925Z,1538705422.925 [Default:CheckIn:C.Wait] Stopped
2018-10-05T02:10:22.925Z,1538705422.925 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T02:10:22.925Z,1538705422.925 [Default:CheckIn:D] Running Loop=1
2018-10-05T02:10:23.325Z,1538705423.325 [Default:CheckIn:D] Stopped
2018-10-05T02:10:23.325Z,1538705423.325 [Default:CheckIn:E] Running Loop=1
2018-10-05T02:10:23.772Z,1538705423.772 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1313.925911 min 
2018-10-05T02:10:23.773Z,1538705423.773 [Default:CheckIn:E] Stopped
2018-10-05T02:10:23.773Z,1538705423.773 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T02:10:23.773Z,1538705423.773 [Default:CheckIn] Stopped
2018-10-05T02:10:23.773Z,1538705423.773 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T02:10:23.773Z,1538705423.773 [Default:CheckIn](INFO): Running loop #128
2018-10-05T02:10:23.773Z,1538705423.773 [Default:CheckIn] Running Loop=128
2018-10-05T02:10:23.774Z,1538705423.774 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T02:10:23.774Z,1538705423.774 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T02:13:20.734Z,1538705600.734 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:13:20.734Z,1538705600.734 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-10-05T02:13:20.734Z,1538705600.734 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:13:20.746Z,1538705600.746 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:13:20.747Z,1538705600.747 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-05T02:13:20.747Z,1538705600.747 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:13:20.760Z,1538705600.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:13:20.760Z,1538705600.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:13:21.166Z,1538705601.166 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:13:21.166Z,1538705601.166 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-10-05T02:13:21.166Z,1538705601.166 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:13:21.166Z,1538705601.166 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-05T02:13:21.510Z,1538705601.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:13:21.510Z,1538705601.510 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:13:21.511Z,1538705601.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:13:21.511Z,1538705601.511 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:13:21.511Z,1538705601.511 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:13:21.512Z,1538705601.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:15:26.632Z,1538705726.632 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T02:10:23.8Z
2018-10-05T02:15:26.633Z,1538705726.633 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T02:15:26.633Z,1538705726.633 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T02:15:31.581Z,1538705731.581 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0385.lzma
2018-10-05T02:15:32.345Z,1538705732.345 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0385.lzma.bak
2018-10-05T02:15:32.345Z,1538705732.345 [DataOverHttps](INFO): SBD MOMSN=8611340
2018-10-05T02:15:41.868Z,1538705741.868 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0386.lzma
2018-10-05T02:15:42.642Z,1538705742.642 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0386.lzma.bak
2018-10-05T02:15:42.642Z,1538705742.642 [DataOverHttps](INFO): SBD MOMSN=8611342
2018-10-05T02:15:43.621Z,1538705743.621 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T02:15:43.621Z,1538705743.621 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T02:15:43.621Z,1538705743.621 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T02:16:04.567Z,1538705764.567 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T02:16:04.567Z,1538705764.567 [NAL9602] Data Fault, FailCount= 5
2018-10-05T02:16:04.567Z,1538705764.567 [NAL9602](ERROR): Data Fault
2018-10-05T02:16:04.647Z,1538705764.647 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T02:16:04.648Z,1538705764.648 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T02:16:04.955Z,1538705764.955 [NAL9602](INFO): Powering down
2018-10-05T02:16:05.037Z,1538705765.037 [CBIT](INFO): Critical error at 20181005T021604
2018-10-05T02:16:23.124Z,1538705783.124 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:16:23.124Z,1538705783.124 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-10-05T02:16:23.124Z,1538705783.124 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:16:23.126Z,1538705783.126 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:16:23.126Z,1538705783.126 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-05T02:16:23.126Z,1538705783.126 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:16:23.140Z,1538705783.140 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:16:23.140Z,1538705783.140 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:16:23.262Z,1538705783.262 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:16:23.262Z,1538705783.262 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-10-05T02:16:23.263Z,1538705783.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:16:23.263Z,1538705783.263 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-05T02:16:23.635Z,1538705783.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:16:23.636Z,1538705783.636 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:16:23.636Z,1538705783.636 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:16:23.636Z,1538705783.636 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:16:23.641Z,1538705783.641 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:16:23.642Z,1538705783.642 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:18:04.582Z,1538705884.582 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T02:18:04.582Z,1538705884.582 [NAL9602] No Fault, FailCount= 5
2018-10-05T02:18:04.895Z,1538705884.895 [NAL9602](INFO): Powering up NAL9602
2018-10-05T02:18:15.831Z,1538705895.831 [NAL9602](INFO): NAL9602 initialized
2018-10-05T02:19:23.644Z,1538705963.644 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:19:23.644Z,1538705963.644 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-10-05T02:19:23.644Z,1538705963.644 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:19:23.650Z,1538705963.650 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:19:23.651Z,1538705963.651 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-05T02:19:23.651Z,1538705963.651 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:19:23.668Z,1538705963.668 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:19:23.668Z,1538705963.668 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:19:24.059Z,1538705964.059 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:19:24.059Z,1538705964.059 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-10-05T02:19:24.059Z,1538705964.059 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:19:24.059Z,1538705964.059 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-05T02:19:24.451Z,1538705964.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:19:24.451Z,1538705964.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:19:24.452Z,1538705964.452 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:19:24.452Z,1538705964.452 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:19:24.453Z,1538705964.453 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:19:24.453Z,1538705964.453 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:20:43.812Z,1538706043.812 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T02:20:43.813Z,1538706043.813 [Default:CheckIn:C.Wait] Stopped
2018-10-05T02:20:43.813Z,1538706043.813 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T02:20:43.813Z,1538706043.813 [Default:CheckIn:D] Running Loop=1
2018-10-05T02:20:44.215Z,1538706044.215 [Default:CheckIn:D] Stopped
2018-10-05T02:20:44.215Z,1538706044.215 [Default:CheckIn:E] Running Loop=1
2018-10-05T02:20:44.625Z,1538706044.625 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1324.274089 min 
2018-10-05T02:20:44.625Z,1538706044.625 [Default:CheckIn:E] Stopped
2018-10-05T02:20:44.625Z,1538706044.625 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T02:20:44.625Z,1538706044.625 [Default:CheckIn] Stopped
2018-10-05T02:20:44.625Z,1538706044.625 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T02:20:44.626Z,1538706044.626 [Default:CheckIn](INFO): Running loop #129
2018-10-05T02:20:44.626Z,1538706044.626 [Default:CheckIn] Running Loop=129
2018-10-05T02:20:44.626Z,1538706044.626 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T02:20:44.626Z,1538706044.626 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T02:22:16.318Z,1538706136.318 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.880, -0.001, 0.000
2018-10-05T02:22:24.747Z,1538706144.747 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:22:24.747Z,1538706144.747 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-10-05T02:22:24.747Z,1538706144.747 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:22:24.753Z,1538706144.753 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:22:24.753Z,1538706144.753 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-05T02:22:24.754Z,1538706144.754 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:22:24.786Z,1538706144.786 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:22:24.786Z,1538706144.786 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:22:25.155Z,1538706145.155 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:22:25.155Z,1538706145.155 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-10-05T02:22:25.155Z,1538706145.155 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:22:25.156Z,1538706145.156 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-05T02:22:25.530Z,1538706145.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:22:25.530Z,1538706145.530 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:22:25.531Z,1538706145.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:22:25.531Z,1538706145.531 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:22:25.532Z,1538706145.532 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:22:25.532Z,1538706145.532 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:24:09.417Z,1538706249.417 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T02:24:09.417Z,1538706249.417 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,     ,   0.00,4713.07
2018-10-05T02:25:25.643Z,1538706325.643 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:25:25.643Z,1538706325.643 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-10-05T02:25:25.643Z,1538706325.643 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:25:25.649Z,1538706325.649 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:25:25.649Z,1538706325.649 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-10-05T02:25:25.649Z,1538706325.649 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:25:25.681Z,1538706325.681 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:25:25.681Z,1538706325.681 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:25:26.101Z,1538706326.101 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:25:26.101Z,1538706326.101 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-10-05T02:25:26.102Z,1538706326.102 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:25:26.102Z,1538706326.102 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-10-05T02:25:26.463Z,1538706326.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:25:26.463Z,1538706326.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:25:26.464Z,1538706326.464 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:25:26.464Z,1538706326.464 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:25:26.465Z,1538706326.465 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:25:26.465Z,1538706326.465 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:25:46.859Z,1538706346.859 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T02:20:44.6Z
2018-10-05T02:25:46.859Z,1538706346.859 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T02:25:46.859Z,1538706346.859 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T02:25:51.810Z,1538706351.810 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0388.lzma
2018-10-05T02:25:52.589Z,1538706352.589 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0388.lzma.bak
2018-10-05T02:25:52.589Z,1538706352.589 [DataOverHttps](INFO): SBD MOMSN=8611346
2018-10-05T02:26:01.780Z,1538706361.780 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0389.lzma
2018-10-05T02:26:02.545Z,1538706362.545 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0389.lzma.bak
2018-10-05T02:26:02.545Z,1538706362.545 [DataOverHttps](INFO): SBD MOMSN=8611349
2018-10-05T02:26:03.929Z,1538706363.929 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T02:26:03.929Z,1538706363.929 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T02:26:03.929Z,1538706363.929 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T02:28:16.767Z,1538706496.767 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T02:28:16.767Z,1538706496.767 [NAL9602] Data Fault, FailCount= 1
2018-10-05T02:28:16.767Z,1538706496.767 [NAL9602](ERROR): Data Fault
2018-10-05T02:28:16.840Z,1538706496.840 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T02:28:17.167Z,1538706497.167 [NAL9602](INFO): Powering down
2018-10-05T02:28:18.052Z,1538706498.052 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T02:28:18.052Z,1538706498.052 [NAL9602] No Fault, FailCount= 1
2018-10-05T02:28:28.814Z,1538706508.814 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:28:28.814Z,1538706508.814 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-10-05T02:28:28.814Z,1538706508.814 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:28:28.816Z,1538706508.816 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:28:28.816Z,1538706508.816 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-10-05T02:28:28.816Z,1538706508.816 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:28:28.829Z,1538706508.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:28:28.830Z,1538706508.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:28:28.957Z,1538706508.957 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:28:28.957Z,1538706508.957 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-10-05T02:28:28.958Z,1538706508.958 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:28:28.958Z,1538706508.958 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-10-05T02:28:29.302Z,1538706509.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:28:29.303Z,1538706509.303 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:28:29.303Z,1538706509.303 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:28:29.304Z,1538706509.304 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:28:29.304Z,1538706509.304 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:28:29.304Z,1538706509.304 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:28:47.247Z,1538706527.247 [NAL9602](INFO): Powering up NAL9602
2018-10-05T02:28:58.447Z,1538706538.447 [NAL9602](INFO): NAL9602 initialized
2018-10-05T02:29:22.190Z,1538706562.190 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.887,*-0.007,*0.000
2018-10-05T02:31:04.023Z,1538706664.023 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T02:31:04.023Z,1538706664.023 [Default:CheckIn:C.Wait] Stopped
2018-10-05T02:31:04.023Z,1538706664.023 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T02:31:04.023Z,1538706664.023 [Default:CheckIn:D] Running Loop=1
2018-10-05T02:31:04.427Z,1538706664.427 [Default:CheckIn:D] Stopped
2018-10-05T02:31:04.427Z,1538706664.427 [Default:CheckIn:E] Running Loop=1
2018-10-05T02:31:04.817Z,1538706664.817 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1334.610938 min 
2018-10-05T02:31:04.817Z,1538706664.817 [Default:CheckIn:E] Stopped
2018-10-05T02:31:04.818Z,1538706664.818 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T02:31:04.818Z,1538706664.818 [Default:CheckIn] Stopped
2018-10-05T02:31:04.818Z,1538706664.818 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T02:31:04.818Z,1538706664.818 [Default:CheckIn](INFO): Running loop #130
2018-10-05T02:31:04.818Z,1538706664.818 [Default:CheckIn] Running Loop=130
2018-10-05T02:31:04.818Z,1538706664.818 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T02:31:04.818Z,1538706664.818 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T02:31:29.511Z,1538706689.511 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:31:29.512Z,1538706689.512 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-10-05T02:31:29.512Z,1538706689.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:31:29.518Z,1538706689.518 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:31:29.518Z,1538706689.518 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-10-05T02:31:29.518Z,1538706689.518 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:31:29.542Z,1538706689.542 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:31:29.543Z,1538706689.543 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:31:29.932Z,1538706689.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:31:29.932Z,1538706689.932 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-10-05T02:31:29.932Z,1538706689.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:31:29.932Z,1538706689.932 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-10-05T02:31:30.346Z,1538706690.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:31:30.346Z,1538706690.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:31:30.347Z,1538706690.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:31:30.347Z,1538706690.347 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:31:30.347Z,1538706690.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:31:30.348Z,1538706690.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:34:30.403Z,1538706870.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:34:30.403Z,1538706870.403 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-10-05T02:34:30.403Z,1538706870.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:34:30.409Z,1538706870.409 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:34:30.409Z,1538706870.409 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-10-05T02:34:30.409Z,1538706870.409 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:34:30.435Z,1538706870.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:34:30.435Z,1538706870.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:34:30.818Z,1538706870.818 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:34:30.819Z,1538706870.819 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-10-05T02:34:30.819Z,1538706870.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:34:30.819Z,1538706870.819 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-10-05T02:34:31.212Z,1538706871.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:34:31.212Z,1538706871.212 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:34:31.213Z,1538706871.213 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:34:31.213Z,1538706871.213 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:34:31.214Z,1538706871.214 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:34:31.214Z,1538706871.214 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:36:07.370Z,1538706967.370 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T02:31:04.8Z
2018-10-05T02:36:07.370Z,1538706967.370 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T02:36:07.370Z,1538706967.370 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T02:36:12.683Z,1538706972.683 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0391.lzma
2018-10-05T02:36:13.473Z,1538706973.473 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0391.lzma.bak
2018-10-05T02:36:13.473Z,1538706973.473 [DataOverHttps](INFO): SBD MOMSN=8611353
2018-10-05T02:36:26.444Z,1538706986.444 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0392.lzma
2018-10-05T02:36:27.234Z,1538706987.234 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0392.lzma.bak
2018-10-05T02:36:27.235Z,1538706987.235 [DataOverHttps](INFO): SBD MOMSN=8611355
2018-10-05T02:36:29.059Z,1538706989.059 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T02:36:29.059Z,1538706989.059 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T02:36:29.059Z,1538706989.059 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T02:37:31.394Z,1538707051.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:37:31.394Z,1538707051.395 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-10-05T02:37:31.395Z,1538707051.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:37:31.396Z,1538707051.396 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:37:31.401Z,1538707051.401 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-10-05T02:37:31.401Z,1538707051.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:37:31.422Z,1538707051.422 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:37:31.423Z,1538707051.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:37:31.814Z,1538707051.814 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:37:31.814Z,1538707051.814 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-10-05T02:37:31.814Z,1538707051.814 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:37:31.814Z,1538707051.814 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-10-05T02:37:32.205Z,1538707052.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:37:32.206Z,1538707052.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:37:32.206Z,1538707052.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:37:32.207Z,1538707052.207 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:37:32.207Z,1538707052.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:37:32.207Z,1538707052.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:38:59.575Z,1538707139.575 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T02:38:59.575Z,1538707139.575 [NAL9602] Data Fault, FailCount= 2
2018-10-05T02:38:59.575Z,1538707139.575 [NAL9602](ERROR): Data Fault
2018-10-05T02:38:59.646Z,1538707139.646 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T02:38:59.981Z,1538707139.981 [NAL9602](INFO): Powering down
2018-10-05T02:39:00.834Z,1538707140.834 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T02:39:00.834Z,1538707140.834 [NAL9602] No Fault, FailCount= 2
2018-10-05T02:39:30.051Z,1538707170.051 [NAL9602](INFO): Powering up NAL9602
2018-10-05T02:39:41.251Z,1538707181.251 [NAL9602](INFO): NAL9602 initialized
2018-10-05T02:40:32.567Z,1538707232.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:40:32.567Z,1538707232.567 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-10-05T02:40:32.568Z,1538707232.568 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:40:32.569Z,1538707232.569 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:40:32.570Z,1538707232.570 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-10-05T02:40:32.570Z,1538707232.570 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:40:32.594Z,1538707232.594 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:40:32.594Z,1538707232.594 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:40:32.987Z,1538707232.987 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:40:32.987Z,1538707232.987 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-10-05T02:40:32.987Z,1538707232.987 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:40:32.988Z,1538707232.988 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-10-05T02:40:33.408Z,1538707233.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:40:33.409Z,1538707233.409 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:40:33.409Z,1538707233.409 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:40:33.410Z,1538707233.410 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:40:33.410Z,1538707233.410 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:40:33.411Z,1538707233.411 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:41:29.548Z,1538707289.548 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T02:41:29.553Z,1538707289.553 [Default:CheckIn:C.Wait] Stopped
2018-10-05T02:41:29.553Z,1538707289.553 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T02:41:29.553Z,1538707289.553 [Default:CheckIn:D] Running Loop=1
2018-10-05T02:41:30.025Z,1538707290.025 [Default:CheckIn:D] Stopped
2018-10-05T02:41:30.025Z,1538707290.025 [Default:CheckIn:E] Running Loop=1
2018-10-05T02:41:30.379Z,1538707290.379 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1345.037630 min 
2018-10-05T02:41:30.379Z,1538707290.379 [Default:CheckIn:E] Stopped
2018-10-05T02:41:30.380Z,1538707290.380 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T02:41:30.380Z,1538707290.380 [Default:CheckIn] Stopped
2018-10-05T02:41:30.380Z,1538707290.380 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T02:41:30.380Z,1538707290.380 [Default:CheckIn](INFO): Running loop #131
2018-10-05T02:41:30.380Z,1538707290.380 [Default:CheckIn] Running Loop=131
2018-10-05T02:41:30.380Z,1538707290.380 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T02:41:30.380Z,1538707290.380 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T02:43:35.854Z,1538707415.854 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:43:35.854Z,1538707415.854 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-10-05T02:43:35.854Z,1538707415.854 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:43:35.856Z,1538707415.856 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:43:35.856Z,1538707415.856 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-10-05T02:43:35.856Z,1538707415.856 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:43:35.893Z,1538707415.893 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:43:35.894Z,1538707415.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:43:36.045Z,1538707416.045 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:43:36.045Z,1538707416.045 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-10-05T02:43:36.046Z,1538707416.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:43:36.046Z,1538707416.046 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-10-05T02:43:36.353Z,1538707416.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:43:36.354Z,1538707416.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:43:36.354Z,1538707416.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:43:36.355Z,1538707416.355 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:43:36.355Z,1538707416.355 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:43:36.355Z,1538707416.355 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:46:32.439Z,1538707592.439 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T02:41:30.4Z
2018-10-05T02:46:32.439Z,1538707592.439 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T02:46:32.439Z,1538707592.439 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T02:46:36.592Z,1538707596.592 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:46:36.592Z,1538707596.592 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-10-05T02:46:36.592Z,1538707596.592 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:46:36.594Z,1538707596.594 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:46:36.594Z,1538707596.594 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-10-05T02:46:36.594Z,1538707596.594 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:46:36.644Z,1538707596.644 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:46:36.644Z,1538707596.644 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:46:41.614Z,1538707601.614 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:46:41.614Z,1538707601.614 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-10-05T02:46:41.615Z,1538707601.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:46:41.615Z,1538707601.615 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-10-05T02:46:41.636Z,1538707601.636 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0394.lzma
2018-10-05T02:46:41.709Z,1538707601.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:46:41.710Z,1538707601.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:46:41.710Z,1538707601.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:46:41.711Z,1538707601.711 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:46:41.711Z,1538707601.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:46:41.711Z,1538707601.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:46:42.437Z,1538707602.437 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0394.lzma.bak
2018-10-05T02:46:42.437Z,1538707602.437 [DataOverHttps](INFO): SBD MOMSN=8611359
2018-10-05T02:46:51.842Z,1538707611.842 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0395.lzma
2018-10-05T02:46:52.609Z,1538707612.609 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0395.lzma.bak
2018-10-05T02:46:52.610Z,1538707612.610 [DataOverHttps](INFO): SBD MOMSN=8611361
2018-10-05T02:46:53.691Z,1538707613.691 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T02:46:53.692Z,1538707613.692 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T02:46:53.692Z,1538707613.692 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T02:48:59.156Z,1538707739.156 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T02:49:14.750Z,1538707754.750 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T02:49:14.750Z,1538707754.750 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.   +0.00,        +0.00,   0.00,6217.34
2018-10-05T02:49:42.033Z,1538707782.033 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:49:42.033Z,1538707782.033 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-10-05T02:49:42.033Z,1538707782.033 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:49:42.035Z,1538707782.035 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:49:42.035Z,1538707782.035 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-10-05T02:49:42.035Z,1538707782.035 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:49:42.056Z,1538707782.056 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:49:42.056Z,1538707782.056 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:49:42.461Z,1538707782.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:49:42.461Z,1538707782.461 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-10-05T02:49:42.462Z,1538707782.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:49:42.462Z,1538707782.462 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-10-05T02:49:42.825Z,1538707782.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:49:42.826Z,1538707782.826 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:49:42.826Z,1538707782.826 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:49:42.826Z,1538707782.826 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:49:42.827Z,1538707782.827 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:49:42.827Z,1538707782.827 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:49:43.583Z,1538707783.583 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T02:49:43.583Z,1538707783.583 [NAL9602] Data Fault, FailCount= 3
2018-10-05T02:49:43.583Z,1538707783.583 [NAL9602](ERROR): Data Fault
2018-10-05T02:49:43.669Z,1538707783.669 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T02:49:43.987Z,1538707783.987 [NAL9602](INFO): Powering down
2018-10-05T02:49:44.842Z,1538707784.842 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T02:49:44.842Z,1538707784.842 [NAL9602] No Fault, FailCount= 3
2018-10-05T02:50:14.123Z,1538707814.123 [NAL9602](INFO): Powering up NAL9602
2018-10-05T02:50:24.919Z,1538707824.919 [NAL9602](INFO): NAL9602 initialized
2018-10-05T02:51:53.901Z,1538707913.901 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T02:51:53.905Z,1538707913.905 [Default:CheckIn:C.Wait] Stopped
2018-10-05T02:51:53.905Z,1538707913.905 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T02:51:53.905Z,1538707913.905 [Default:CheckIn:D] Running Loop=1
2018-10-05T02:51:54.291Z,1538707914.291 [Default:CheckIn:D] Stopped
2018-10-05T02:51:54.291Z,1538707914.291 [Default:CheckIn:E] Running Loop=1
2018-10-05T02:51:54.702Z,1538707914.702 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1355.442057 min 
2018-10-05T02:51:54.703Z,1538707914.703 [Default:CheckIn:E] Stopped
2018-10-05T02:51:54.703Z,1538707914.703 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T02:51:54.703Z,1538707914.703 [Default:CheckIn] Stopped
2018-10-05T02:51:54.703Z,1538707914.703 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T02:51:54.703Z,1538707914.703 [Default:CheckIn](INFO): Running loop #132
2018-10-05T02:51:54.703Z,1538707914.703 [Default:CheckIn] Running Loop=132
2018-10-05T02:51:54.704Z,1538707914.704 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T02:51:54.704Z,1538707914.704 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T02:52:43.195Z,1538707963.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:52:43.195Z,1538707963.195 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-10-05T02:52:43.195Z,1538707963.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:52:43.197Z,1538707963.197 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:52:43.198Z,1538707963.198 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-10-05T02:52:43.198Z,1538707963.198 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:52:43.211Z,1538707963.211 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:52:43.211Z,1538707963.211 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:52:43.618Z,1538707963.618 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:52:43.618Z,1538707963.618 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-10-05T02:52:43.619Z,1538707963.619 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:52:43.619Z,1538707963.619 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-10-05T02:52:43.978Z,1538707963.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:52:43.978Z,1538707963.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:52:43.979Z,1538707963.979 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:52:43.979Z,1538707963.979 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:52:43.979Z,1538707963.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:52:43.980Z,1538707963.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:55:21.197Z,1538708121.197 [RDI_Pathfinder](ERROR): Failed to parse:
:H8c,0ffd, 15.867, 0.001, 65.535
2018-10-05T02:55:46.385Z,1538708146.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:55:46.386Z,1538708146.386 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-10-05T02:55:46.386Z,1538708146.386 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:55:46.387Z,1538708146.387 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:55:46.388Z,1538708146.388 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-10-05T02:55:46.388Z,1538708146.388 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:55:46.433Z,1538708146.433 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:55:46.434Z,1538708146.434 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:55:46.563Z,1538708146.563 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:55:46.563Z,1538708146.563 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-10-05T02:55:46.563Z,1538708146.563 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:55:46.563Z,1538708146.563 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-10-05T02:55:46.910Z,1538708146.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:55:46.911Z,1538708146.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:55:46.912Z,1538708146.912 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:55:46.912Z,1538708146.912 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:55:46.914Z,1538708146.914 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:55:46.914Z,1538708146.914 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:56:57.805Z,1538708217.805 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T02:51:54.7Z
2018-10-05T02:56:57.805Z,1538708217.805 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T02:56:57.805Z,1538708217.805 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T02:57:02.743Z,1538708222.743 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0397.lzma
2018-10-05T02:57:03.918Z,1538708223.918 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0397.lzma.bak
2018-10-05T02:57:03.918Z,1538708223.918 [DataOverHttps](INFO): SBD MOMSN=8611365
2018-10-05T02:57:13.114Z,1538708233.114 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0398.lzma
2018-10-05T02:57:13.901Z,1538708233.901 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0398.lzma.bak
2018-10-05T02:57:13.901Z,1538708233.901 [DataOverHttps](INFO): SBD MOMSN=8611367
2018-10-05T02:57:14.852Z,1538708234.852 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T02:57:14.852Z,1538708234.852 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T02:57:14.852Z,1538708234.852 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T02:58:47.287Z,1538708327.287 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:58:47.287Z,1538708327.287 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-10-05T02:58:47.287Z,1538708327.287 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T02:58:47.289Z,1538708327.289 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T02:58:47.289Z,1538708327.289 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-10-05T02:58:47.289Z,1538708327.289 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T02:58:47.315Z,1538708327.315 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T02:58:47.315Z,1538708327.315 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T02:58:47.693Z,1538708327.693 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T02:58:47.693Z,1538708327.693 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-10-05T02:58:47.693Z,1538708327.693 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T02:58:47.693Z,1538708327.693 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-10-05T02:58:48.100Z,1538708328.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T02:58:48.100Z,1538708328.100 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:58:48.100Z,1538708328.100 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T02:58:48.101Z,1538708328.101 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T02:58:48.102Z,1538708328.102 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T02:58:48.102Z,1538708328.102 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:00:26.291Z,1538708426.291 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T03:00:26.291Z,1538708426.291 [NAL9602] Data Fault, FailCount= 4
2018-10-05T03:00:26.291Z,1538708426.291 [NAL9602](ERROR): Data Fault
2018-10-05T03:00:26.381Z,1538708426.381 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T03:00:26.691Z,1538708426.691 [NAL9602](INFO): Powering down
2018-10-05T03:00:27.545Z,1538708427.545 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T03:00:27.549Z,1538708427.549 [NAL9602] No Fault, FailCount= 4
2018-10-05T03:00:56.755Z,1538708456.755 [NAL9602](INFO): Powering up NAL9602
2018-10-05T03:01:07.555Z,1538708467.555 [NAL9602](INFO): NAL9602 initialized
2018-10-05T03:01:27.329Z,1538708487.329 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.880, -0.002, 0.000
2018-10-05T03:01:48.138Z,1538708508.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:01:48.138Z,1538708508.138 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-10-05T03:01:48.138Z,1538708508.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:01:48.140Z,1538708508.140 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:01:48.140Z,1538708508.140 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-10-05T03:01:48.140Z,1538708508.140 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:01:48.161Z,1538708508.161 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:01:48.162Z,1538708508.162 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:01:48.543Z,1538708508.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:01:48.543Z,1538708508.543 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-10-05T03:01:48.543Z,1538708508.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:01:48.543Z,1538708508.543 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-10-05T03:01:48.919Z,1538708508.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:01:48.920Z,1538708508.920 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:01:48.921Z,1538708508.921 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:01:48.921Z,1538708508.921 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:01:48.922Z,1538708508.922 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:01:48.923Z,1538708508.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:02:15.024Z,1538708535.024 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T03:02:15.024Z,1538708535.024 [Default:CheckIn:C.Wait] Stopped
2018-10-05T03:02:15.024Z,1538708535.024 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T03:02:15.024Z,1538708535.024 [Default:CheckIn:D] Running Loop=1
2018-10-05T03:02:15.409Z,1538708535.409 [Default:CheckIn:D] Stopped
2018-10-05T03:02:15.409Z,1538708535.409 [Default:CheckIn:E] Running Loop=1
2018-10-05T03:02:15.813Z,1538708535.813 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1365.793880 min 
2018-10-05T03:02:15.814Z,1538708535.814 [Default:CheckIn:E] Stopped
2018-10-05T03:02:15.814Z,1538708535.814 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T03:02:15.814Z,1538708535.814 [Default:CheckIn] Stopped
2018-10-05T03:02:15.814Z,1538708535.814 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T03:02:15.814Z,1538708535.814 [Default:CheckIn](INFO): Running loop #133
2018-10-05T03:02:15.814Z,1538708535.814 [Default:CheckIn] Running Loop=133
2018-10-05T03:02:15.814Z,1538708535.814 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T03:02:15.815Z,1538708535.815 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T03:04:49.092Z,1538708689.092 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:04:49.092Z,1538708689.092 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-10-05T03:04:49.092Z,1538708689.092 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:04:49.110Z,1538708689.110 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:04:49.111Z,1538708689.111 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-10-05T03:04:49.111Z,1538708689.111 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:04:49.148Z,1538708689.148 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:04:49.149Z,1538708689.149 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:04:49.506Z,1538708689.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:04:49.506Z,1538708689.506 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-10-05T03:04:49.507Z,1538708689.507 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:04:49.507Z,1538708689.507 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-10-05T03:04:49.874Z,1538708689.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:04:49.874Z,1538708689.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:04:49.875Z,1538708689.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:04:49.875Z,1538708689.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:04:49.875Z,1538708689.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:04:49.876Z,1538708689.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:07:19.056Z,1538708839.056 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T03:02:15.8Z
2018-10-05T03:07:19.056Z,1538708839.056 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T03:07:19.056Z,1538708839.056 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T03:07:24.128Z,1538708844.128 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0400.lzma
2018-10-05T03:07:24.920Z,1538708844.920 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0400.lzma.bak
2018-10-05T03:07:24.920Z,1538708844.920 [DataOverHttps](INFO): SBD MOMSN=8611371
2018-10-05T03:07:34.909Z,1538708854.909 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0401.lzma
2018-10-05T03:07:35.689Z,1538708855.689 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0401.lzma.bak
2018-10-05T03:07:35.690Z,1538708855.690 [DataOverHttps](INFO): SBD MOMSN=8611373
2018-10-05T03:07:36.629Z,1538708856.629 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T03:07:36.630Z,1538708856.630 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T03:07:36.630Z,1538708856.630 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T03:07:50.015Z,1538708870.015 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:07:50.015Z,1538708870.015 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-10-05T03:07:50.015Z,1538708870.015 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:07:50.021Z,1538708870.021 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:07:50.021Z,1538708870.021 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-10-05T03:07:50.021Z,1538708870.021 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:07:50.047Z,1538708870.047 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:07:50.047Z,1538708870.047 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:07:50.402Z,1538708870.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:07:50.402Z,1538708870.402 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-10-05T03:07:50.402Z,1538708870.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:07:50.403Z,1538708870.403 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-10-05T03:07:50.809Z,1538708870.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:07:50.809Z,1538708870.809 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:07:50.810Z,1538708870.810 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:07:50.810Z,1538708870.810 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:07:50.810Z,1538708870.810 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:07:50.811Z,1538708870.811 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:10:50.867Z,1538709050.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:10:50.867Z,1538709050.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-10-05T03:10:50.867Z,1538709050.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:10:50.874Z,1538709050.874 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:10:50.874Z,1538709050.874 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-10-05T03:10:50.874Z,1538709050.874 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:10:50.892Z,1538709050.892 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:10:50.892Z,1538709050.892 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:10:51.298Z,1538709051.298 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:10:51.298Z,1538709051.298 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-10-05T03:10:51.299Z,1538709051.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:10:51.299Z,1538709051.299 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-10-05T03:10:51.670Z,1538709051.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:10:51.670Z,1538709051.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:10:51.671Z,1538709051.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:10:51.671Z,1538709051.671 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:10:51.671Z,1538709051.671 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:10:51.672Z,1538709051.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:11:12.125Z,1538709072.125 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T03:11:12.125Z,1538709072.125 [NAL9602] Data Fault, FailCount= 5
2018-10-05T03:11:12.125Z,1538709072.125 [NAL9602](ERROR): Data Fault
2018-10-05T03:11:12.208Z,1538709072.208 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T03:11:12.209Z,1538709072.209 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T03:11:12.467Z,1538709072.467 [NAL9602](INFO): Powering down
2018-10-05T03:11:12.527Z,1538709072.527 [CBIT](INFO): Critical error at 20181005T031112
2018-10-05T03:12:37.036Z,1538709157.036 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T03:12:37.036Z,1538709157.036 [Default:CheckIn:C.Wait] Stopped
2018-10-05T03:12:37.036Z,1538709157.036 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T03:12:37.036Z,1538709157.036 [Default:CheckIn:D] Running Loop=1
2018-10-05T03:12:37.401Z,1538709157.401 [Default:CheckIn:D] Stopped
2018-10-05T03:12:37.401Z,1538709157.401 [Default:CheckIn:E] Running Loop=1
2018-10-05T03:12:37.817Z,1538709157.817 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1376.160547 min 
2018-10-05T03:12:37.817Z,1538709157.817 [Default:CheckIn:E] Stopped
2018-10-05T03:12:37.817Z,1538709157.817 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T03:12:37.818Z,1538709157.818 [Default:CheckIn] Stopped
2018-10-05T03:12:37.818Z,1538709157.818 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T03:12:37.818Z,1538709157.818 [Default:CheckIn](INFO): Running loop #134
2018-10-05T03:12:37.818Z,1538709157.818 [Default:CheckIn] Running Loop=134
2018-10-05T03:12:37.818Z,1538709157.818 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T03:12:37.818Z,1538709157.818 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T03:13:12.354Z,1538709192.354 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T03:13:12.354Z,1538709192.354 [NAL9602] No Fault, FailCount= 5
2018-10-05T03:13:12.684Z,1538709192.684 [NAL9602](INFO): Powering up NAL9602
2018-10-05T03:13:23.479Z,1538709203.479 [NAL9602](INFO): NAL9602 initialized
2018-10-05T03:13:52.011Z,1538709232.011 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:13:52.011Z,1538709232.011 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-10-05T03:13:52.011Z,1538709232.011 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:13:52.013Z,1538709232.013 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:13:52.014Z,1538709232.014 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-10-05T03:13:52.014Z,1538709232.014 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:13:52.027Z,1538709232.027 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:13:52.027Z,1538709232.027 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:13:52.458Z,1538709232.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:13:52.458Z,1538709232.458 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-10-05T03:13:52.459Z,1538709232.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:13:52.459Z,1538709232.459 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-10-05T03:13:52.804Z,1538709232.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:13:52.805Z,1538709232.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:13:52.805Z,1538709232.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:13:52.806Z,1538709232.806 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:13:52.806Z,1538709232.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:13:52.806Z,1538709232.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:16:53.164Z,1538709413.164 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:16:53.164Z,1538709413.164 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-10-05T03:16:53.164Z,1538709413.164 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:16:53.167Z,1538709413.167 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:16:53.167Z,1538709413.167 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-10-05T03:16:53.167Z,1538709413.167 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:16:53.180Z,1538709413.180 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:16:53.181Z,1538709413.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:16:53.593Z,1538709413.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:16:53.593Z,1538709413.593 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-10-05T03:16:53.594Z,1538709413.594 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:16:53.594Z,1538709413.594 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-10-05T03:16:53.954Z,1538709413.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:16:53.954Z,1538709413.954 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:16:53.955Z,1538709413.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:16:53.955Z,1538709413.955 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:16:53.955Z,1538709413.955 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:16:53.956Z,1538709413.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:17:40.098Z,1538709460.098 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T03:12:37.8Z
2018-10-05T03:17:40.098Z,1538709460.098 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T03:17:40.098Z,1538709460.098 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T03:17:45.070Z,1538709465.070 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0403.lzma
2018-10-05T03:17:45.837Z,1538709465.837 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0403.lzma.bak
2018-10-05T03:17:45.837Z,1538709465.837 [DataOverHttps](INFO): SBD MOMSN=8611377
2018-10-05T03:17:57.417Z,1538709477.417 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0404.lzma
2018-10-05T03:17:57.990Z,1538709477.990 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0404.lzma.bak
2018-10-05T03:17:57.990Z,1538709477.990 [DataOverHttps](INFO): SBD MOMSN=8611380
2018-10-05T03:17:58.933Z,1538709478.933 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T03:17:58.934Z,1538709478.934 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T03:17:58.934Z,1538709478.934 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T03:19:54.315Z,1538709594.315 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:19:54.315Z,1538709594.315 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-10-05T03:19:54.315Z,1538709594.315 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:19:54.317Z,1538709594.317 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:19:54.317Z,1538709594.317 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-10-05T03:19:54.317Z,1538709594.317 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:19:54.331Z,1538709594.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:19:54.331Z,1538709594.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:19:54.710Z,1538709594.710 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:19:54.710Z,1538709594.710 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-10-05T03:19:54.710Z,1538709594.710 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:19:54.710Z,1538709594.710 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-10-05T03:19:55.101Z,1538709595.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:19:55.102Z,1538709595.102 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:19:55.102Z,1538709595.102 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:19:55.102Z,1538709595.102 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:19:55.103Z,1538709595.103 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:19:55.103Z,1538709595.103 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:22:55.164Z,1538709775.164 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:22:55.164Z,1538709775.164 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-10-05T03:22:55.164Z,1538709775.164 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:22:55.166Z,1538709775.166 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:22:55.167Z,1538709775.167 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-10-05T03:22:55.167Z,1538709775.167 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:22:55.180Z,1538709775.180 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:22:55.180Z,1538709775.180 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:22:55.574Z,1538709775.574 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:22:55.574Z,1538709775.574 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-10-05T03:22:55.575Z,1538709775.575 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:22:55.575Z,1538709775.575 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-10-05T03:22:55.968Z,1538709775.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:22:55.968Z,1538709775.968 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:22:55.973Z,1538709775.973 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:22:55.973Z,1538709775.973 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:22:55.974Z,1538709775.974 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:22:55.974Z,1538709775.974 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:22:59.166Z,1538709779.166 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T03:22:59.166Z,1538709779.166 [Default:CheckIn:C.Wait] Stopped
2018-10-05T03:22:59.166Z,1538709779.166 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T03:22:59.166Z,1538709779.166 [Default:CheckIn:D] Running Loop=1
2018-10-05T03:22:59.541Z,1538709779.541 [Default:CheckIn:D] Stopped
2018-10-05T03:22:59.541Z,1538709779.541 [Default:CheckIn:E] Running Loop=1
2018-10-05T03:22:59.969Z,1538709779.969 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1386.529427 min 
2018-10-05T03:22:59.969Z,1538709779.969 [Default:CheckIn:E] Stopped
2018-10-05T03:22:59.969Z,1538709779.969 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T03:22:59.969Z,1538709779.969 [Default:CheckIn] Stopped
2018-10-05T03:22:59.969Z,1538709779.969 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T03:22:59.970Z,1538709779.970 [Default:CheckIn](INFO): Running loop #135
2018-10-05T03:22:59.970Z,1538709779.970 [Default:CheckIn] Running Loop=135
2018-10-05T03:22:59.970Z,1538709779.970 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T03:22:59.970Z,1538709779.970 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T03:23:25.579Z,1538709805.579 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T03:23:25.579Z,1538709805.579 [NAL9602] Data Fault, FailCount= 1
2018-10-05T03:23:25.579Z,1538709805.579 [NAL9602](ERROR): Data Fault
2018-10-05T03:23:25.640Z,1538709805.640 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T03:23:25.983Z,1538709805.983 [NAL9602](INFO): Powering down
2018-10-05T03:23:26.841Z,1538709806.841 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T03:23:26.841Z,1538709806.841 [NAL9602] No Fault, FailCount= 1
2018-10-05T03:23:56.091Z,1538709836.091 [NAL9602](INFO): Powering up NAL9602
2018-10-05T03:24:07.287Z,1538709847.287 [NAL9602](INFO): NAL9602 initialized
2018-10-05T03:25:56.048Z,1538709956.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:25:56.048Z,1538709956.048 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-10-05T03:25:56.048Z,1538709956.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:25:56.062Z,1538709956.062 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:25:56.062Z,1538709956.062 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-10-05T03:25:56.062Z,1538709956.062 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:25:56.087Z,1538709956.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:25:56.087Z,1538709956.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:25:56.458Z,1538709956.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:25:56.458Z,1538709956.458 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-10-05T03:25:56.459Z,1538709956.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:25:56.459Z,1538709956.459 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-10-05T03:25:56.844Z,1538709956.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:25:56.845Z,1538709956.845 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:25:56.845Z,1538709956.845 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:25:56.846Z,1538709956.846 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:25:56.846Z,1538709956.846 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:25:56.846Z,1538709956.846 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:28:02.355Z,1538710082.355 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T03:22:59.0Z
2018-10-05T03:28:02.355Z,1538710082.355 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T03:28:02.355Z,1538710082.355 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T03:28:07.732Z,1538710087.732 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0406.lzma
2018-10-05T03:28:08.485Z,1538710088.485 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0406.lzma.bak
2018-10-05T03:28:08.486Z,1538710088.486 [DataOverHttps](INFO): SBD MOMSN=8611384
2018-10-05T03:28:17.721Z,1538710097.721 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0407.lzma
2018-10-05T03:28:18.481Z,1538710098.481 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0407.lzma.bak
2018-10-05T03:28:18.481Z,1538710098.481 [DataOverHttps](INFO): SBD MOMSN=8611386
2018-10-05T03:28:19.507Z,1538710099.507 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T03:28:19.507Z,1538710099.507 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T03:28:19.508Z,1538710099.508 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T03:28:58.477Z,1538710138.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:28:58.477Z,1538710138.477 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-10-05T03:28:58.478Z,1538710138.478 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:28:58.479Z,1538710138.479 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:28:58.479Z,1538710138.479 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-10-05T03:28:58.480Z,1538710138.480 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:28:58.493Z,1538710138.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:28:58.493Z,1538710138.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:28:58.623Z,1538710138.623 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:28:58.624Z,1538710138.624 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-10-05T03:28:58.624Z,1538710138.624 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:28:58.624Z,1538710138.624 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-10-05T03:28:58.981Z,1538710138.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:28:58.982Z,1538710138.982 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:28:58.982Z,1538710138.982 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:28:58.982Z,1538710138.982 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:28:58.983Z,1538710138.983 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:28:58.983Z,1538710138.983 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:31:59.054Z,1538710319.054 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:31:59.055Z,1538710319.055 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-10-05T03:31:59.055Z,1538710319.055 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:31:59.057Z,1538710319.057 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:31:59.061Z,1538710319.061 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-10-05T03:31:59.061Z,1538710319.061 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:31:59.082Z,1538710319.082 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:31:59.083Z,1538710319.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:31:59.471Z,1538710319.471 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:31:59.471Z,1538710319.471 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-10-05T03:31:59.471Z,1538710319.471 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:31:59.471Z,1538710319.471 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-10-05T03:31:59.842Z,1538710319.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:31:59.842Z,1538710319.842 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:31:59.843Z,1538710319.843 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:31:59.843Z,1538710319.843 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:31:59.843Z,1538710319.843 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:31:59.844Z,1538710319.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:33:19.710Z,1538710399.710 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T03:33:19.710Z,1538710399.710 [Default:CheckIn:C.Wait] Stopped
2018-10-05T03:33:19.710Z,1538710399.710 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T03:33:19.710Z,1538710399.710 [Default:CheckIn:D] Running Loop=1
2018-10-05T03:33:20.116Z,1538710400.116 [Default:CheckIn:D] Stopped
2018-10-05T03:33:20.117Z,1538710400.117 [Default:CheckIn:E] Running Loop=1
2018-10-05T03:33:20.513Z,1538710400.513 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1396.872526 min 
2018-10-05T03:33:20.514Z,1538710400.514 [Default:CheckIn:E] Stopped
2018-10-05T03:33:20.514Z,1538710400.514 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T03:33:20.514Z,1538710400.514 [Default:CheckIn] Stopped
2018-10-05T03:33:20.514Z,1538710400.514 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T03:33:20.514Z,1538710400.514 [Default:CheckIn](INFO): Running loop #136
2018-10-05T03:33:20.514Z,1538710400.514 [Default:CheckIn] Running Loop=136
2018-10-05T03:33:20.514Z,1538710400.514 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T03:33:20.515Z,1538710400.515 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T03:34:08.947Z,1538710448.947 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T03:34:08.947Z,1538710448.947 [NAL9602] Data Fault, FailCount= 2
2018-10-05T03:34:08.947Z,1538710448.947 [NAL9602](ERROR): Data Fault
2018-10-05T03:34:09.027Z,1538710449.027 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T03:34:09.351Z,1538710449.351 [NAL9602](INFO): Powering down
2018-10-05T03:34:10.222Z,1538710450.222 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T03:34:10.222Z,1538710450.222 [NAL9602] No Fault, FailCount= 2
2018-10-05T03:34:39.427Z,1538710479.427 [NAL9602](INFO): Powering up NAL9602
2018-10-05T03:34:51.903Z,1538710491.903 [NAL9602](INFO): NAL9602 initialized
2018-10-05T03:34:59.970Z,1538710499.970 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:34:59.970Z,1538710499.970 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-10-05T03:34:59.970Z,1538710499.970 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:34:59.972Z,1538710499.972 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:34:59.972Z,1538710499.972 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-10-05T03:34:59.972Z,1538710499.972 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:35:00.002Z,1538710500.002 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:35:00.003Z,1538710500.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:35:00.355Z,1538710500.355 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:35:00.355Z,1538710500.355 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-10-05T03:35:00.356Z,1538710500.356 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:35:00.356Z,1538710500.356 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-10-05T03:35:00.743Z,1538710500.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:35:00.743Z,1538710500.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:35:00.743Z,1538710500.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:35:00.744Z,1538710500.744 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:35:00.744Z,1538710500.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:35:00.745Z,1538710500.745 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:38:00.808Z,1538710680.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:38:00.808Z,1538710680.808 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-10-05T03:38:00.808Z,1538710680.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:38:00.822Z,1538710680.822 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:38:00.822Z,1538710680.822 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-10-05T03:38:00.822Z,1538710680.822 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:38:00.844Z,1538710680.844 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:38:00.844Z,1538710680.844 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:38:01.258Z,1538710681.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:38:01.258Z,1538710681.258 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-10-05T03:38:01.258Z,1538710681.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:38:01.258Z,1538710681.258 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-10-05T03:38:01.609Z,1538710681.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:38:01.610Z,1538710681.610 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:38:01.610Z,1538710681.610 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:38:01.611Z,1538710681.611 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:38:01.611Z,1538710681.611 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:38:01.611Z,1538710681.611 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:38:23.203Z,1538710703.203 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T03:33:20.5Z
2018-10-05T03:38:23.203Z,1538710703.203 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T03:38:23.203Z,1538710703.203 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T03:38:31.116Z,1538710711.116 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0409.lzma
2018-10-05T03:38:32.589Z,1538710712.589 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0409.lzma.bak
2018-10-05T03:38:32.589Z,1538710712.589 [DataOverHttps](INFO): SBD MOMSN=8611390
2018-10-05T03:38:42.498Z,1538710722.498 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0410.lzma
2018-10-05T03:38:43.275Z,1538710723.275 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0410.lzma.bak
2018-10-05T03:38:43.275Z,1538710723.275 [DataOverHttps](INFO): SBD MOMSN=8611392
2018-10-05T03:38:44.202Z,1538710724.202 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T03:38:44.202Z,1538710724.202 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T03:38:44.202Z,1538710724.202 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T03:41:01.995Z,1538710861.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:41:01.995Z,1538710861.995 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-10-05T03:41:01.995Z,1538710861.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:41:02.001Z,1538710862.001 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:41:02.001Z,1538710862.001 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-10-05T03:41:02.002Z,1538710862.002 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:41:02.024Z,1538710862.024 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:41:02.024Z,1538710862.024 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:41:02.436Z,1538710862.436 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:41:02.436Z,1538710862.436 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-10-05T03:41:02.436Z,1538710862.436 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:41:02.437Z,1538710862.437 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-10-05T03:41:02.806Z,1538710862.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:41:02.807Z,1538710862.807 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:41:02.807Z,1538710862.807 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:41:02.807Z,1538710862.807 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:41:02.808Z,1538710862.808 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:41:02.808Z,1538710862.808 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:43:44.343Z,1538711024.343 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T03:43:44.343Z,1538711024.343 [Default:CheckIn:C.Wait] Stopped
2018-10-05T03:43:44.343Z,1538711024.343 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T03:43:44.343Z,1538711024.343 [Default:CheckIn:D] Running Loop=1
2018-10-05T03:43:44.725Z,1538711024.725 [Default:CheckIn:D] Stopped
2018-10-05T03:43:44.725Z,1538711024.725 [Default:CheckIn:E] Running Loop=1
2018-10-05T03:43:45.137Z,1538711025.137 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1407.282682 min 
2018-10-05T03:43:45.137Z,1538711025.137 [Default:CheckIn:E] Stopped
2018-10-05T03:43:45.137Z,1538711025.137 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T03:43:45.137Z,1538711025.137 [Default:CheckIn] Stopped
2018-10-05T03:43:45.138Z,1538711025.138 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T03:43:45.138Z,1538711025.138 [Default:CheckIn](INFO): Running loop #137
2018-10-05T03:43:45.138Z,1538711025.138 [Default:CheckIn] Running Loop=137
2018-10-05T03:43:45.138Z,1538711025.138 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T03:43:45.138Z,1538711025.138 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T03:44:05.135Z,1538711045.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:44:05.135Z,1538711045.135 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-10-05T03:44:05.135Z,1538711045.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:44:05.137Z,1538711045.137 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:44:05.137Z,1538711045.137 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-10-05T03:44:05.137Z,1538711045.137 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:44:05.174Z,1538711045.174 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:44:05.175Z,1538711045.175 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:44:05.281Z,1538711045.281 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:44:05.281Z,1538711045.281 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-10-05T03:44:05.282Z,1538711045.282 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:44:05.282Z,1538711045.282 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-10-05T03:44:05.634Z,1538711045.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:44:05.634Z,1538711045.634 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:44:05.635Z,1538711045.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:44:05.635Z,1538711045.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:44:05.635Z,1538711045.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:44:05.636Z,1538711045.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:44:53.711Z,1538711093.711 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T03:44:53.711Z,1538711093.711 [NAL9602] Data Fault, FailCount= 3
2018-10-05T03:44:53.711Z,1538711093.711 [NAL9602](ERROR): Data Fault
2018-10-05T03:44:53.780Z,1538711093.780 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T03:44:54.107Z,1538711094.107 [NAL9602](INFO): Powering down
2018-10-05T03:44:55.006Z,1538711095.006 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T03:44:55.006Z,1538711095.006 [NAL9602] No Fault, FailCount= 3
2018-10-05T03:45:24.204Z,1538711124.204 [NAL9602](INFO): Powering up NAL9602
2018-10-05T03:45:35.011Z,1538711135.011 [NAL9602](INFO): NAL9602 initialized
2018-10-05T03:47:05.917Z,1538711225.917 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:47:05.917Z,1538711225.917 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-10-05T03:47:05.917Z,1538711225.917 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:47:05.919Z,1538711225.919 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:47:05.920Z,1538711225.920 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-10-05T03:47:05.920Z,1538711225.920 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:47:05.933Z,1538711225.933 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:47:05.934Z,1538711225.934 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:47:06.307Z,1538711226.307 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:47:06.307Z,1538711226.307 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-10-05T03:47:06.308Z,1538711226.308 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:47:06.308Z,1538711226.308 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-10-05T03:47:06.662Z,1538711226.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:47:06.662Z,1538711226.662 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:47:06.663Z,1538711226.663 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:47:06.663Z,1538711226.663 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:47:06.664Z,1538711226.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:47:06.664Z,1538711226.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:48:47.271Z,1538711327.271 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T03:43:45.1Z
2018-10-05T03:48:47.271Z,1538711327.271 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T03:48:47.271Z,1538711327.271 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T03:48:52.172Z,1538711332.172 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0412.lzma
2018-10-05T03:48:52.970Z,1538711332.970 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0412.lzma.bak
2018-10-05T03:48:52.970Z,1538711332.970 [DataOverHttps](INFO): SBD MOMSN=8611396
2018-10-05T03:49:05.760Z,1538711345.760 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0413.lzma
2018-10-05T03:49:06.537Z,1538711346.537 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0413.lzma.bak
2018-10-05T03:49:06.537Z,1538711346.537 [DataOverHttps](INFO): SBD MOMSN=8611398
2018-10-05T03:49:07.788Z,1538711347.788 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T03:49:07.788Z,1538711347.788 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T03:49:07.788Z,1538711347.788 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T03:50:06.931Z,1538711406.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:50:06.931Z,1538711406.931 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-10-05T03:50:06.931Z,1538711406.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:50:06.934Z,1538711406.934 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:50:06.934Z,1538711406.934 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-10-05T03:50:06.934Z,1538711406.934 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:50:06.947Z,1538711406.947 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:50:06.948Z,1538711406.948 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:50:07.314Z,1538711407.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:50:07.314Z,1538711407.314 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-10-05T03:50:07.315Z,1538711407.315 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:50:07.315Z,1538711407.315 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-10-05T03:50:07.682Z,1538711407.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:50:07.682Z,1538711407.682 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:50:07.683Z,1538711407.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:50:07.683Z,1538711407.683 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:50:07.683Z,1538711407.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:50:07.684Z,1538711407.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:53:07.898Z,1538711587.898 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:53:07.899Z,1538711587.899 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-10-05T03:53:07.899Z,1538711587.899 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:53:07.901Z,1538711587.901 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:53:07.905Z,1538711587.905 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-10-05T03:53:07.905Z,1538711587.905 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:53:07.927Z,1538711587.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:53:07.927Z,1538711587.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:53:08.313Z,1538711588.313 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:53:08.313Z,1538711588.313 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-10-05T03:53:08.314Z,1538711588.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:53:08.314Z,1538711588.314 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-10-05T03:53:08.666Z,1538711588.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:53:08.666Z,1538711588.666 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:53:08.667Z,1538711588.667 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:53:08.667Z,1538711588.667 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:53:08.668Z,1538711588.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:53:08.668Z,1538711588.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:54:08.137Z,1538711648.137 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T03:54:08.137Z,1538711648.137 [Default:CheckIn:C.Wait] Stopped
2018-10-05T03:54:08.137Z,1538711648.137 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T03:54:08.137Z,1538711648.137 [Default:CheckIn:D] Running Loop=1
2018-10-05T03:54:08.501Z,1538711648.501 [Default:CheckIn:D] Stopped
2018-10-05T03:54:08.501Z,1538711648.501 [Default:CheckIn:E] Running Loop=1
2018-10-05T03:54:08.952Z,1538711648.952 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1417.678906 min 
2018-10-05T03:54:08.957Z,1538711648.957 [Default:CheckIn:E] Stopped
2018-10-05T03:54:08.957Z,1538711648.957 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T03:54:08.957Z,1538711648.957 [Default:CheckIn] Stopped
2018-10-05T03:54:08.957Z,1538711648.957 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T03:54:08.957Z,1538711648.957 [Default:CheckIn](INFO): Running loop #138
2018-10-05T03:54:08.958Z,1538711648.958 [Default:CheckIn] Running Loop=138
2018-10-05T03:54:08.958Z,1538711648.958 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T03:54:08.958Z,1538711648.958 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T03:55:35.890Z,1538711735.890 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T03:55:35.890Z,1538711735.890 [NAL9602] Data Fault, FailCount= 4
2018-10-05T03:55:35.890Z,1538711735.890 [NAL9602](ERROR): Data Fault
2018-10-05T03:55:35.993Z,1538711735.993 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T03:55:36.283Z,1538711736.283 [NAL9602](INFO): Powering down
2018-10-05T03:55:39.839Z,1538711739.839 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T03:55:39.839Z,1538711739.839 [NAL9602] No Fault, FailCount= 4
2018-10-05T03:56:06.451Z,1538711766.451 [NAL9602](INFO): Powering up NAL9602
2018-10-05T03:56:08.919Z,1538711768.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:56:08.919Z,1538711768.919 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-10-05T03:56:08.919Z,1538711768.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:56:08.921Z,1538711768.921 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:56:08.921Z,1538711768.921 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-10-05T03:56:08.921Z,1538711768.921 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:56:08.943Z,1538711768.943 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:56:08.944Z,1538711768.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:56:09.317Z,1538711769.317 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:56:09.317Z,1538711769.317 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-10-05T03:56:09.317Z,1538711769.317 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:56:09.317Z,1538711769.317 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-10-05T03:56:09.678Z,1538711769.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:56:09.678Z,1538711769.678 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:56:09.679Z,1538711769.679 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:56:09.679Z,1538711769.679 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:56:09.679Z,1538711769.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:56:09.680Z,1538711769.680 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:56:16.196Z,1538711776.196 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8b,0ffd, 15.880, -0.001, 0.000
2018-10-05T03:56:17.367Z,1538711777.367 [NAL9602](INFO): NAL9602 initialized
2018-10-05T03:56:26.619Z,1538711786.619 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T03:59:11.417Z,1538711951.417 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:59:11.418Z,1538711951.418 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-10-05T03:59:11.418Z,1538711951.418 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T03:59:11.419Z,1538711951.419 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T03:59:11.420Z,1538711951.420 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-10-05T03:59:11.420Z,1538711951.420 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T03:59:11.426Z,1538711951.426 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T03:54:08.0Z
2018-10-05T03:59:11.426Z,1538711951.426 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T03:59:11.426Z,1538711951.426 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T03:59:11.450Z,1538711951.450 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T03:59:11.451Z,1538711951.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T03:59:11.575Z,1538711951.575 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T03:59:11.575Z,1538711951.575 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-10-05T03:59:11.575Z,1538711951.575 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T03:59:11.576Z,1538711951.576 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-10-05T03:59:12.200Z,1538711952.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T03:59:12.200Z,1538711952.200 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:59:12.201Z,1538711952.201 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:59:12.201Z,1538711952.201 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T03:59:12.202Z,1538711952.202 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T03:59:12.202Z,1538711952.202 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T03:59:16.378Z,1538711956.378 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0415.lzma
2018-10-05T03:59:17.145Z,1538711957.145 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0415.lzma.bak
2018-10-05T03:59:17.145Z,1538711957.145 [DataOverHttps](INFO): SBD MOMSN=8611402
2018-10-05T03:59:26.396Z,1538711966.396 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0416.lzma
2018-10-05T03:59:27.169Z,1538711967.169 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0416.lzma.bak
2018-10-05T03:59:27.169Z,1538711967.169 [DataOverHttps](INFO): SBD MOMSN=8611404
2018-10-05T03:59:28.160Z,1538711968.160 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T03:59:28.160Z,1538711968.160 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T03:59:28.160Z,1538711968.160 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T04:02:12.284Z,1538712132.284 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:02:12.284Z,1538712132.284 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-10-05T04:02:12.284Z,1538712132.284 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:02:12.286Z,1538712132.286 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:02:12.286Z,1538712132.286 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-10-05T04:02:12.286Z,1538712132.286 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:02:12.300Z,1538712132.300 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:02:12.300Z,1538712132.300 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:02:12.678Z,1538712132.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:02:12.678Z,1538712132.678 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-10-05T04:02:12.679Z,1538712132.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:02:12.679Z,1538712132.679 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-10-05T04:02:13.050Z,1538712133.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:02:13.050Z,1538712133.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:02:13.051Z,1538712133.051 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:02:13.051Z,1538712133.051 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:02:13.051Z,1538712133.051 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:02:13.052Z,1538712133.052 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:03:04.489Z,1538712184.489 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-05T04:04:28.309Z,1538712268.309 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T04:04:28.310Z,1538712268.310 [Default:CheckIn:C.Wait] Stopped
2018-10-05T04:04:28.310Z,1538712268.310 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T04:04:28.310Z,1538712268.310 [Default:CheckIn:D] Running Loop=1
2018-10-05T04:04:28.674Z,1538712268.674 [Default:CheckIn:D] Stopped
2018-10-05T04:04:28.674Z,1538712268.674 [Default:CheckIn:E] Running Loop=1
2018-10-05T04:04:29.105Z,1538712269.105 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1428.015104 min 
2018-10-05T04:04:29.105Z,1538712269.105 [Default:CheckIn:E] Stopped
2018-10-05T04:04:29.106Z,1538712269.106 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T04:04:29.106Z,1538712269.106 [Default:CheckIn] Stopped
2018-10-05T04:04:29.106Z,1538712269.106 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T04:04:29.106Z,1538712269.106 [Default:CheckIn](INFO): Running loop #139
2018-10-05T04:04:29.106Z,1538712269.106 [Default:CheckIn] Running Loop=139
2018-10-05T04:04:29.106Z,1538712269.106 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T04:04:29.106Z,1538712269.106 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T04:05:13.174Z,1538712313.174 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:05:13.174Z,1538712313.174 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-10-05T04:05:13.174Z,1538712313.174 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:05:13.176Z,1538712313.176 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:05:13.176Z,1538712313.176 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-10-05T04:05:13.176Z,1538712313.176 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:05:13.205Z,1538712313.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:05:13.206Z,1538712313.206 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:05:13.608Z,1538712313.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:05:13.608Z,1538712313.608 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-10-05T04:05:13.609Z,1538712313.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:05:13.609Z,1538712313.609 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-10-05T04:05:13.955Z,1538712313.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:05:13.955Z,1538712313.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:05:13.956Z,1538712313.956 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:05:13.956Z,1538712313.956 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:05:13.957Z,1538712313.957 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:05:13.957Z,1538712313.957 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:06:18.523Z,1538712378.523 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T04:06:18.523Z,1538712378.523 [NAL9602] Data Fault, FailCount= 5
2018-10-05T04:06:18.523Z,1538712378.523 [NAL9602](ERROR): Data Fault
2018-10-05T04:06:18.626Z,1538712378.626 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T04:06:18.626Z,1538712378.626 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T04:06:18.923Z,1538712378.923 [NAL9602](INFO): Powering down
2018-10-05T04:06:19.000Z,1538712379.000 [CBIT](INFO): Critical error at 20181005T040618
2018-10-05T04:08:14.059Z,1538712494.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:08:14.059Z,1538712494.059 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-10-05T04:08:14.059Z,1538712494.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:08:14.081Z,1538712494.081 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:08:14.082Z,1538712494.082 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-10-05T04:08:14.082Z,1538712494.082 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:08:14.111Z,1538712494.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:08:14.111Z,1538712494.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:08:14.521Z,1538712494.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:08:14.521Z,1538712494.521 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-10-05T04:08:14.522Z,1538712494.522 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:08:14.522Z,1538712494.522 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-10-05T04:08:14.876Z,1538712494.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:08:14.882Z,1538712494.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:08:14.882Z,1538712494.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:08:14.883Z,1538712494.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:08:14.884Z,1538712494.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:08:14.889Z,1538712494.889 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:08:20.932Z,1538712500.932 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T04:08:20.932Z,1538712500.932 [NAL9602] No Fault, FailCount= 5
2018-10-05T04:08:20.980Z,1538712500.980 [NAL9602](INFO): Powering up NAL9602
2018-10-05T04:08:32.159Z,1538712512.159 [NAL9602](INFO): NAL9602 initialized
2018-10-05T04:09:31.504Z,1538712571.504 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T04:04:29.1Z
2018-10-05T04:09:31.504Z,1538712571.504 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T04:09:31.504Z,1538712571.504 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T04:09:36.452Z,1538712576.452 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0418.lzma
2018-10-05T04:09:37.225Z,1538712577.225 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0418.lzma.bak
2018-10-05T04:09:37.226Z,1538712577.226 [DataOverHttps](INFO): SBD MOMSN=8611408
2018-10-05T04:09:46.801Z,1538712586.801 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0419.lzma
2018-10-05T04:09:47.589Z,1538712587.589 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0419.lzma.bak
2018-10-05T04:09:47.589Z,1538712587.589 [DataOverHttps](INFO): SBD MOMSN=8611411
2018-10-05T04:09:48.542Z,1538712588.542 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T04:09:48.542Z,1538712588.542 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T04:09:48.542Z,1538712588.542 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T04:11:15.061Z,1538712675.061 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:11:15.061Z,1538712675.061 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-10-05T04:11:15.061Z,1538712675.061 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:11:15.063Z,1538712675.063 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:11:15.063Z,1538712675.063 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-10-05T04:11:15.063Z,1538712675.063 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:11:15.092Z,1538712675.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:11:15.093Z,1538712675.093 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:11:15.466Z,1538712675.466 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:11:15.466Z,1538712675.466 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-10-05T04:11:15.467Z,1538712675.467 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:11:15.467Z,1538712675.467 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-10-05T04:11:15.846Z,1538712675.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:11:15.847Z,1538712675.847 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:11:15.848Z,1538712675.848 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:11:15.848Z,1538712675.848 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:11:15.854Z,1538712675.854 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:11:15.854Z,1538712675.854 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:14:15.904Z,1538712855.904 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:14:15.904Z,1538712855.904 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-10-05T04:14:15.904Z,1538712855.904 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:14:15.906Z,1538712855.906 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:14:15.906Z,1538712855.906 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-10-05T04:14:15.906Z,1538712855.906 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:14:15.919Z,1538712855.919 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:14:15.920Z,1538712855.920 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:14:16.301Z,1538712856.301 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:14:16.301Z,1538712856.301 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-10-05T04:14:16.301Z,1538712856.301 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:14:16.302Z,1538712856.302 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-10-05T04:14:16.687Z,1538712856.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:14:16.687Z,1538712856.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:14:16.688Z,1538712856.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:14:16.688Z,1538712856.688 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:14:16.688Z,1538712856.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:14:16.689Z,1538712856.689 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:14:34.313Z,1538712874.313 [CBIT](IMPORTANT): Beginning ground fault scan
2018-10-05T04:14:44.796Z,1538712884.796 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.127217
CHAN A1 (24V): 0.003536
CHAN A2 (12V): -0.007164
CHAN A3 (5V): -0.002283
CHAN B0 (3.3V): 0.000431
CHAN B1 (3.15aV): -0.000061
CHAN B2 (3.15bV): 0.000364
CHAN B3 (GND): 0.002240
OPEN: 0.004705
Full Scale Calc: 4.765 mA, -1.589 mA
2018-10-05T04:14:48.772Z,1538712888.772 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T04:14:48.773Z,1538712888.773 [Default:CheckIn:C.Wait] Stopped
2018-10-05T04:14:48.773Z,1538712888.773 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T04:14:48.773Z,1538712888.773 [Default:CheckIn:D] Running Loop=1
2018-10-05T04:14:49.205Z,1538712889.205 [Default:CheckIn:D] Stopped
2018-10-05T04:14:49.205Z,1538712889.205 [Default:CheckIn:E] Running Loop=1
2018-10-05T04:14:49.584Z,1538712889.584 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1438.357292 min 
2018-10-05T04:14:49.584Z,1538712889.584 [Default:CheckIn:E] Stopped
2018-10-05T04:14:49.585Z,1538712889.585 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T04:14:49.585Z,1538712889.585 [Default:CheckIn] Stopped
2018-10-05T04:14:49.585Z,1538712889.585 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T04:14:49.585Z,1538712889.585 [Default:CheckIn](INFO): Running loop #140
2018-10-05T04:14:49.585Z,1538712889.585 [Default:CheckIn] Running Loop=140
2018-10-05T04:14:49.586Z,1538712889.586 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T04:14:49.586Z,1538712889.586 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T04:17:16.988Z,1538713036.988 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:17:16.989Z,1538713036.989 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-10-05T04:17:16.989Z,1538713036.989 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:17:16.991Z,1538713036.991 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:17:16.991Z,1538713036.991 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-10-05T04:17:16.991Z,1538713036.991 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:17:17.028Z,1538713037.028 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:17:17.033Z,1538713037.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:17:17.389Z,1538713037.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:17:17.389Z,1538713037.389 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-10-05T04:17:17.389Z,1538713037.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:17:17.389Z,1538713037.389 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-10-05T04:17:17.782Z,1538713037.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:17:17.782Z,1538713037.782 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:17:17.783Z,1538713037.783 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:17:17.783Z,1538713037.783 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:17:17.784Z,1538713037.784 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:17:17.784Z,1538713037.784 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:18:33.248Z,1538713113.248 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T04:18:33.248Z,1538713113.248 [NAL9602] Data Fault, FailCount= 1
2018-10-05T04:18:33.248Z,1538713113.248 [NAL9602](ERROR): Data Fault
2018-10-05T04:18:33.341Z,1538713113.341 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T04:18:33.643Z,1538713113.643 [NAL9602](INFO): Powering down
2018-10-05T04:18:34.515Z,1538713114.515 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T04:18:34.515Z,1538713114.515 [NAL9602] No Fault, FailCount= 1
2018-10-05T04:19:03.739Z,1538713143.739 [NAL9602](INFO): Powering up NAL9602
2018-10-05T04:19:17.023Z,1538713157.023 [NAL9602](INFO): NAL9602 initialized
2018-10-05T04:19:51.838Z,1538713191.838 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T04:14:49.6Z
2018-10-05T04:19:51.838Z,1538713191.838 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T04:19:51.838Z,1538713191.838 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T04:19:56.784Z,1538713196.784 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0421.lzma
2018-10-05T04:19:57.573Z,1538713197.573 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0421.lzma.bak
2018-10-05T04:19:57.573Z,1538713197.573 [DataOverHttps](INFO): SBD MOMSN=8611415
2018-10-05T04:20:06.865Z,1538713206.865 [DataOverHttps](INFO): Sending 326 bytes from file Logs/20181004T041305/Express0422.lzma
2018-10-05T04:20:07.621Z,1538713207.621 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0422.lzma.bak
2018-10-05T04:20:07.621Z,1538713207.621 [DataOverHttps](INFO): SBD MOMSN=8611417
2018-10-05T04:20:08.589Z,1538713208.589 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T04:20:08.589Z,1538713208.589 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T04:20:08.589Z,1538713208.589 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T04:20:17.984Z,1538713217.984 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:20:17.985Z,1538713217.985 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-10-05T04:20:17.989Z,1538713217.989 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:20:17.991Z,1538713217.991 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:20:17.991Z,1538713217.991 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-10-05T04:20:17.991Z,1538713217.991 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:20:18.009Z,1538713218.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:20:18.013Z,1538713218.013 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:20:18.380Z,1538713218.380 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:20:18.380Z,1538713218.380 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-10-05T04:20:18.385Z,1538713218.385 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:20:18.385Z,1538713218.385 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-10-05T04:20:18.768Z,1538713218.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:20:18.768Z,1538713218.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:20:18.769Z,1538713218.769 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:20:18.769Z,1538713218.769 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:20:18.770Z,1538713218.770 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:20:18.770Z,1538713218.770 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:23:18.934Z,1538713398.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:23:18.935Z,1538713398.935 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-10-05T04:23:18.935Z,1538713398.935 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:23:18.937Z,1538713398.937 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:23:18.941Z,1538713398.941 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-10-05T04:23:18.941Z,1538713398.941 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:23:18.967Z,1538713398.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:23:18.967Z,1538713398.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:23:19.335Z,1538713399.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:23:19.335Z,1538713399.335 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-10-05T04:23:19.336Z,1538713399.336 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:23:19.336Z,1538713399.336 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-10-05T04:23:19.738Z,1538713399.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:23:19.739Z,1538713399.739 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:23:19.739Z,1538713399.739 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:23:19.739Z,1538713399.739 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:23:19.740Z,1538713399.740 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:23:19.740Z,1538713399.740 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:25:08.817Z,1538713508.817 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T04:25:08.818Z,1538713508.818 [Default:CheckIn:C.Wait] Stopped
2018-10-05T04:25:08.818Z,1538713508.818 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T04:25:08.818Z,1538713508.818 [Default:CheckIn:D] Running Loop=1
2018-10-05T04:25:09.229Z,1538713509.229 [Default:CheckIn:D] Stopped
2018-10-05T04:25:09.229Z,1538713509.229 [Default:CheckIn:E] Running Loop=1
2018-10-05T04:25:09.625Z,1538713509.625 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1448.690885 min 
2018-10-05T04:25:09.625Z,1538713509.625 [Default:CheckIn:E] Stopped
2018-10-05T04:25:09.626Z,1538713509.626 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T04:25:09.626Z,1538713509.626 [Default:CheckIn] Stopped
2018-10-05T04:25:09.626Z,1538713509.626 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T04:25:09.626Z,1538713509.626 [Default:CheckIn](INFO): Running loop #141
2018-10-05T04:25:09.626Z,1538713509.626 [Default:CheckIn] Running Loop=141
2018-10-05T04:25:09.626Z,1538713509.626 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T04:25:09.626Z,1538713509.626 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T04:26:19.822Z,1538713579.822 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:26:19.822Z,1538713579.822 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-10-05T04:26:19.823Z,1538713579.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:26:19.835Z,1538713579.835 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:26:19.835Z,1538713579.835 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-10-05T04:26:19.835Z,1538713579.835 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:26:19.893Z,1538713579.893 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:26:19.893Z,1538713579.893 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:26:20.277Z,1538713580.277 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:26:20.277Z,1538713580.277 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-10-05T04:26:20.278Z,1538713580.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:26:20.278Z,1538713580.278 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-10-05T04:26:20.634Z,1538713580.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:26:20.634Z,1538713580.634 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:26:20.635Z,1538713580.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:26:20.635Z,1538713580.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:26:20.635Z,1538713580.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:26:20.636Z,1538713580.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:26:41.150Z,1538713601.150 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T04:28:48.238Z,1538713728.238 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.860, -0.006, 0.000
2018-10-05T04:28:56.233Z,1538713736.233 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T04:28:56.233Z,1538713736.233 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768V
2018-10-05T04:29:17.877Z,1538713757.877 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T04:29:17.877Z,1538713757.877 [NAL9602] Data Fault, FailCount= 2
2018-10-05T04:29:17.877Z,1538713757.877 [NAL9602](ERROR): Data Fault
2018-10-05T04:29:17.958Z,1538713757.958 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T04:29:18.275Z,1538713758.275 [NAL9602](INFO): Powering down
2018-10-05T04:29:19.146Z,1538713759.146 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T04:29:19.146Z,1538713759.146 [NAL9602] No Fault, FailCount= 2
2018-10-05T04:29:20.703Z,1538713760.703 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:29:20.703Z,1538713760.703 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-10-05T04:29:20.703Z,1538713760.703 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:29:20.725Z,1538713760.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:29:20.725Z,1538713760.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-10-05T04:29:20.725Z,1538713760.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:29:20.750Z,1538713760.750 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:29:20.750Z,1538713760.750 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:29:21.136Z,1538713761.136 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:29:21.137Z,1538713761.137 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-10-05T04:29:21.137Z,1538713761.137 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:29:21.137Z,1538713761.137 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-10-05T04:29:21.506Z,1538713761.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:29:21.506Z,1538713761.506 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:29:21.507Z,1538713761.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:29:21.507Z,1538713761.507 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:29:21.507Z,1538713761.507 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:29:21.508Z,1538713761.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:29:48.351Z,1538713788.351 [NAL9602](INFO): Powering up NAL9602
2018-10-05T04:29:59.551Z,1538713799.551 [NAL9602](INFO): NAL9602 initialized
2018-10-05T04:30:11.608Z,1538713811.608 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T04:25:09.6Z
2018-10-05T04:30:11.608Z,1538713811.608 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T04:30:11.608Z,1538713811.608 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T04:30:16.582Z,1538713816.582 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0424.lzma
2018-10-05T04:30:17.353Z,1538713817.353 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0424.lzma.bak
2018-10-05T04:30:17.353Z,1538713817.353 [DataOverHttps](INFO): SBD MOMSN=8611423
2018-10-05T04:30:27.785Z,1538713827.785 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0425.lzma
2018-10-05T04:30:28.570Z,1538713828.570 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0425.lzma.bak
2018-10-05T04:30:28.570Z,1538713828.570 [DataOverHttps](INFO): SBD MOMSN=8611425
2018-10-05T04:30:29.553Z,1538713829.553 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T04:30:29.553Z,1538713829.553 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T04:30:29.553Z,1538713829.553 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T04:31:38.218Z,1538713898.218 [RDI_Pathfinder](ERROR): Failed to parse:
68,-3268,-32768,V
2018-10-05T04:32:21.575Z,1538713941.575 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:32:21.575Z,1538713941.575 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-10-05T04:32:21.575Z,1538713941.575 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:32:21.581Z,1538713941.581 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:32:21.582Z,1538713941.582 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-10-05T04:32:21.582Z,1538713941.582 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:32:21.603Z,1538713941.603 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:32:21.603Z,1538713941.603 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:32:22.024Z,1538713942.024 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:32:22.024Z,1538713942.024 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-10-05T04:32:22.029Z,1538713942.029 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:32:22.029Z,1538713942.029 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-10-05T04:32:22.409Z,1538713942.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:32:22.410Z,1538713942.410 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:32:22.410Z,1538713942.410 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:32:22.411Z,1538713942.411 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:32:22.411Z,1538713942.411 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:32:22.411Z,1538713942.411 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:35:22.463Z,1538714122.463 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:35:22.463Z,1538714122.463 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-10-05T04:35:22.463Z,1538714122.463 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:35:22.485Z,1538714122.485 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:35:22.485Z,1538714122.485 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-10-05T04:35:22.485Z,1538714122.485 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:35:22.511Z,1538714122.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:35:22.511Z,1538714122.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:35:22.915Z,1538714122.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:35:22.915Z,1538714122.915 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-10-05T04:35:22.916Z,1538714122.916 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:35:22.916Z,1538714122.916 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-10-05T04:35:23.295Z,1538714123.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:35:23.295Z,1538714123.295 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:35:23.296Z,1538714123.296 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:35:23.296Z,1538714123.296 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:35:23.296Z,1538714123.296 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:35:23.297Z,1538714123.297 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:35:30.096Z,1538714130.096 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T04:35:30.096Z,1538714130.096 [Default:CheckIn:C.Wait] Stopped
2018-10-05T04:35:30.096Z,1538714130.096 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T04:35:30.097Z,1538714130.097 [Default:CheckIn:D] Running Loop=1
2018-10-05T04:35:30.496Z,1538714130.496 [Default:CheckIn:D] Stopped
2018-10-05T04:35:30.496Z,1538714130.496 [Default:CheckIn:E] Running Loop=1
2018-10-05T04:35:30.906Z,1538714130.906 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1459.045443 min 
2018-10-05T04:35:30.906Z,1538714130.906 [Default:CheckIn:E] Stopped
2018-10-05T04:35:30.907Z,1538714130.907 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T04:35:30.907Z,1538714130.907 [Default:CheckIn] Stopped
2018-10-05T04:35:30.907Z,1538714130.907 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T04:35:30.907Z,1538714130.907 [Default:CheckIn](INFO): Running loop #142
2018-10-05T04:35:30.907Z,1538714130.907 [Default:CheckIn] Running Loop=142
2018-10-05T04:35:30.907Z,1538714130.907 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T04:35:30.907Z,1538714130.907 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T04:35:41.279Z,1538714141.279 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T04:35:41.280Z,1538714141.280 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100421403832,35.0, -0.11448.BI,-32768,-32768,-32768,-32768,V
2018-10-05T04:38:23.639Z,1538714303.639 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:38:23.639Z,1538714303.639 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-10-05T04:38:23.639Z,1538714303.639 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:38:23.641Z,1538714303.641 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:38:23.641Z,1538714303.641 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-10-05T04:38:23.641Z,1538714303.641 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:38:23.667Z,1538714303.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:38:23.667Z,1538714303.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:38:24.062Z,1538714304.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:38:24.062Z,1538714304.062 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-10-05T04:38:24.063Z,1538714304.063 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:38:24.063Z,1538714304.063 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-10-05T04:38:24.457Z,1538714304.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:38:24.458Z,1538714304.458 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:38:24.458Z,1538714304.458 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:38:24.459Z,1538714304.459 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:38:24.459Z,1538714304.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:38:24.459Z,1538714304.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:40:00.635Z,1538714400.635 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T04:40:00.635Z,1538714400.635 [NAL9602] Data Fault, FailCount= 3
2018-10-05T04:40:00.635Z,1538714400.635 [NAL9602](ERROR): Data Fault
2018-10-05T04:40:00.713Z,1538714400.713 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T04:40:01.031Z,1538714401.031 [NAL9602](INFO): Powering down
2018-10-05T04:40:01.900Z,1538714401.900 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T04:40:01.900Z,1538714401.900 [NAL9602] No Fault, FailCount= 3
2018-10-05T04:40:32.995Z,1538714432.995 [NAL9602](INFO): Powering up NAL9602
2018-10-05T04:40:33.049Z,1538714433.049 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T04:35:30.9Z
2018-10-05T04:40:33.049Z,1538714433.049 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T04:40:33.050Z,1538714433.050 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T04:40:38.016Z,1538714438.016 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0427.lzma
2018-10-05T04:40:38.816Z,1538714438.816 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0427.lzma.bak
2018-10-05T04:40:38.816Z,1538714438.816 [DataOverHttps](INFO): SBD MOMSN=8611429
2018-10-05T04:40:43.831Z,1538714443.831 [NAL9602](INFO): NAL9602 initialized
2018-10-05T04:40:47.957Z,1538714447.957 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0428.lzma
2018-10-05T04:40:48.742Z,1538714448.742 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0428.lzma.bak
2018-10-05T04:40:48.742Z,1538714448.742 [DataOverHttps](INFO): SBD MOMSN=8611431
2018-10-05T04:40:49.678Z,1538714449.678 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T04:40:49.678Z,1538714449.678 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T04:40:49.678Z,1538714449.678 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T04:41:24.619Z,1538714484.619 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:41:24.619Z,1538714484.619 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-10-05T04:41:24.619Z,1538714484.619 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:41:24.630Z,1538714484.630 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:41:24.630Z,1538714484.630 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-10-05T04:41:24.630Z,1538714484.630 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:41:24.659Z,1538714484.659 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:41:24.660Z,1538714484.660 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:41:25.112Z,1538714485.112 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:41:25.112Z,1538714485.112 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-10-05T04:41:25.112Z,1538714485.112 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:41:25.112Z,1538714485.112 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-10-05T04:41:25.423Z,1538714485.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:41:25.423Z,1538714485.423 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:41:25.424Z,1538714485.424 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:41:25.424Z,1538714485.424 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:41:25.425Z,1538714485.425 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:41:25.425Z,1538714485.425 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:42:48.218Z,1538714568.218 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8b,0ffd, 15.887, -0.001, 0.000
2018-10-05T04:44:25.711Z,1538714665.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:44:25.711Z,1538714665.711 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-10-05T04:44:25.711Z,1538714665.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:44:25.713Z,1538714665.713 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:44:25.713Z,1538714665.713 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-10-05T04:44:25.714Z,1538714665.714 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:44:25.735Z,1538714665.735 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:44:25.735Z,1538714665.735 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:44:26.101Z,1538714666.101 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T04:44:26.142Z,1538714666.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:44:26.142Z,1538714666.142 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-10-05T04:44:26.142Z,1538714666.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:44:26.142Z,1538714666.142 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-10-05T04:44:26.486Z,1538714666.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:44:26.486Z,1538714666.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:44:26.487Z,1538714666.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:44:26.487Z,1538714666.487 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:44:26.487Z,1538714666.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:44:26.488Z,1538714666.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:45:49.929Z,1538714749.929 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T04:45:49.933Z,1538714749.933 [Default:CheckIn:C.Wait] Stopped
2018-10-05T04:45:49.933Z,1538714749.933 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T04:45:49.933Z,1538714749.933 [Default:CheckIn:D] Running Loop=1
2018-10-05T04:45:50.316Z,1538714750.316 [Default:CheckIn:D] Stopped
2018-10-05T04:45:50.316Z,1538714750.316 [Default:CheckIn:E] Running Loop=1
2018-10-05T04:45:50.697Z,1538714750.697 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1469.375781 min 
2018-10-05T04:45:50.698Z,1538714750.698 [Default:CheckIn:E] Stopped
2018-10-05T04:45:50.698Z,1538714750.698 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T04:45:50.698Z,1538714750.698 [Default:CheckIn] Stopped
2018-10-05T04:45:50.698Z,1538714750.698 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T04:45:50.698Z,1538714750.698 [Default:CheckIn](INFO): Running loop #143
2018-10-05T04:45:50.698Z,1538714750.698 [Default:CheckIn] Running Loop=143
2018-10-05T04:45:50.699Z,1538714750.699 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T04:45:50.699Z,1538714750.699 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T04:47:26.613Z,1538714846.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:47:26.613Z,1538714846.613 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-10-05T04:47:26.613Z,1538714846.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:47:26.615Z,1538714846.615 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:47:26.615Z,1538714846.615 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-10-05T04:47:26.615Z,1538714846.615 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:47:26.628Z,1538714846.628 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:47:26.629Z,1538714846.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:47:27.024Z,1538714847.024 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:47:27.024Z,1538714847.024 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-10-05T04:47:27.024Z,1538714847.024 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:47:27.024Z,1538714847.024 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-10-05T04:47:27.388Z,1538714847.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:47:27.389Z,1538714847.389 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:47:27.389Z,1538714847.389 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:47:27.390Z,1538714847.390 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:47:27.390Z,1538714847.390 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:47:27.391Z,1538714847.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:50:27.422Z,1538715027.422 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:50:27.422Z,1538715027.422 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-10-05T04:50:27.422Z,1538715027.422 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:50:27.424Z,1538715027.424 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:50:27.424Z,1538715027.424 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-10-05T04:50:27.424Z,1538715027.424 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:50:27.440Z,1538715027.440 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:50:27.441Z,1538715027.441 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:50:27.871Z,1538715027.871 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:50:27.871Z,1538715027.871 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-10-05T04:50:27.872Z,1538715027.872 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:50:27.872Z,1538715027.872 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-10-05T04:50:28.214Z,1538715028.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:50:28.214Z,1538715028.214 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:50:28.215Z,1538715028.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:50:28.215Z,1538715028.215 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:50:28.215Z,1538715028.215 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:50:28.216Z,1538715028.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:50:45.375Z,1538715045.375 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T04:50:45.375Z,1538715045.375 [NAL9602] Data Fault, FailCount= 4
2018-10-05T04:50:45.375Z,1538715045.375 [NAL9602](ERROR): Data Fault
2018-10-05T04:50:45.440Z,1538715045.440 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T04:50:45.780Z,1538715045.780 [NAL9602](INFO): Powering down
2018-10-05T04:50:46.624Z,1538715046.624 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T04:50:46.624Z,1538715046.624 [NAL9602] No Fault, FailCount= 4
2018-10-05T04:50:52.982Z,1538715052.982 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T04:45:50.7Z
2018-10-05T04:50:52.982Z,1538715052.982 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T04:50:52.982Z,1538715052.982 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T04:50:57.924Z,1538715057.924 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0430.lzma
2018-10-05T04:50:58.714Z,1538715058.714 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0430.lzma.bak
2018-10-05T04:50:58.714Z,1538715058.714 [DataOverHttps](INFO): SBD MOMSN=8611435
2018-10-05T04:51:07.873Z,1538715067.873 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0431.lzma
2018-10-05T04:51:08.650Z,1538715068.650 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0431.lzma.bak
2018-10-05T04:51:08.650Z,1538715068.650 [DataOverHttps](INFO): SBD MOMSN=8611437
2018-10-05T04:51:09.562Z,1538715069.562 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T04:51:09.572Z,1538715069.572 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T04:51:09.572Z,1538715069.572 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T04:51:09.572Z,1538715069.572 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T04:51:16.059Z,1538715076.059 [NAL9602](INFO): Powering up NAL9602
2018-10-05T04:51:27.259Z,1538715087.259 [NAL9602](INFO): NAL9602 initialized
2018-10-05T04:53:28.399Z,1538715208.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:53:28.399Z,1538715208.399 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-10-05T04:53:28.399Z,1538715208.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:53:28.401Z,1538715208.401 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:53:28.401Z,1538715208.401 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-10-05T04:53:28.401Z,1538715208.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:53:28.444Z,1538715208.444 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:53:28.445Z,1538715208.445 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:53:28.837Z,1538715208.837 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:53:28.837Z,1538715208.837 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-10-05T04:53:28.838Z,1538715208.838 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:53:28.838Z,1538715208.838 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-10-05T04:53:29.199Z,1538715209.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:53:29.200Z,1538715209.200 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:53:29.200Z,1538715209.200 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:53:29.200Z,1538715209.200 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:53:29.205Z,1538715209.205 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:53:29.205Z,1538715209.205 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:56:09.827Z,1538715369.827 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T04:56:09.827Z,1538715369.827 [Default:CheckIn:C.Wait] Stopped
2018-10-05T04:56:09.827Z,1538715369.827 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T04:56:09.827Z,1538715369.827 [Default:CheckIn:D] Running Loop=1
2018-10-05T04:56:10.214Z,1538715370.214 [Default:CheckIn:D] Stopped
2018-10-05T04:56:10.215Z,1538715370.215 [Default:CheckIn:E] Running Loop=1
2018-10-05T04:56:10.613Z,1538715370.613 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1479.707422 min 
2018-10-05T04:56:10.613Z,1538715370.613 [Default:CheckIn:E] Stopped
2018-10-05T04:56:10.613Z,1538715370.613 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T04:56:10.614Z,1538715370.614 [Default:CheckIn] Stopped
2018-10-05T04:56:10.614Z,1538715370.614 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T04:56:10.614Z,1538715370.614 [Default:CheckIn](INFO): Running loop #144
2018-10-05T04:56:10.614Z,1538715370.614 [Default:CheckIn] Running Loop=144
2018-10-05T04:56:10.614Z,1538715370.614 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T04:56:10.614Z,1538715370.614 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T04:56:18.180Z,1538715378.180 [RDI_Pathfinder](ERROR): only read 4 of 5 data items
2018-10-05T04:56:18.180Z,1538715378.180 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-327S,-32768,-32768,-32768,V
2018-10-05T04:56:30.593Z,1538715390.593 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:56:30.593Z,1538715390.593 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-10-05T04:56:30.593Z,1538715390.593 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:56:30.595Z,1538715390.595 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:56:30.595Z,1538715390.595 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-10-05T04:56:30.595Z,1538715390.595 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:56:30.608Z,1538715390.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:56:30.609Z,1538715390.609 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:56:30.782Z,1538715390.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:56:30.782Z,1538715390.782 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-10-05T04:56:30.783Z,1538715390.783 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:56:30.783Z,1538715390.783 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-10-05T04:56:31.095Z,1538715391.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:56:31.096Z,1538715391.096 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:56:31.096Z,1538715391.096 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:56:31.096Z,1538715391.096 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:56:31.101Z,1538715391.101 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:56:31.101Z,1538715391.101 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:59:31.386Z,1538715571.386 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:59:31.386Z,1538715571.386 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-10-05T04:59:31.386Z,1538715571.386 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T04:59:31.388Z,1538715571.388 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T04:59:31.388Z,1538715571.388 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-10-05T04:59:31.388Z,1538715571.388 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T04:59:31.417Z,1538715571.417 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T04:59:31.417Z,1538715571.417 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T04:59:31.810Z,1538715571.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T04:59:31.810Z,1538715571.810 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-10-05T04:59:31.811Z,1538715571.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T04:59:31.811Z,1538715571.811 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-10-05T04:59:32.200Z,1538715572.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T04:59:32.209Z,1538715572.209 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:59:32.209Z,1538715572.209 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T04:59:32.210Z,1538715572.210 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T04:59:32.210Z,1538715572.210 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T04:59:32.211Z,1538715572.211 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:01:12.923Z,1538715672.923 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T04:56:10.6Z
2018-10-05T05:01:12.924Z,1538715672.924 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T05:01:12.924Z,1538715672.924 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T05:01:18.032Z,1538715678.032 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0433.lzma
2018-10-05T05:01:18.810Z,1538715678.810 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0433.lzma.bak
2018-10-05T05:01:18.811Z,1538715678.811 [DataOverHttps](INFO): SBD MOMSN=8611441
2018-10-05T05:01:39.450Z,1538715699.450 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20181004T041305/Express0434.lzma
2018-10-05T05:01:39.455Z,1538715699.455 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T05:01:39.455Z,1538715699.455 [NAL9602] Data Fault, FailCount= 5
2018-10-05T05:01:39.455Z,1538715699.455 [NAL9602](ERROR): Data Fault
2018-10-05T05:01:39.649Z,1538715699.649 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T05:01:39.650Z,1538715699.650 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T05:01:39.715Z,1538715699.715 [NAL9602](INFO): Powering down
2018-10-05T05:01:39.764Z,1538715699.764 [CBIT](INFO): Critical error at 20181005T050139
2018-10-05T05:01:40.429Z,1538715700.429 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0434.lzma.bak
2018-10-05T05:01:40.429Z,1538715700.429 [DataOverHttps](INFO): SBD MOMSN=8611443
2018-10-05T05:01:41.689Z,1538715701.689 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T05:01:41.690Z,1538715701.690 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T05:01:41.690Z,1538715701.690 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T05:02:32.395Z,1538715752.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:02:32.395Z,1538715752.395 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-10-05T05:02:32.395Z,1538715752.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:02:32.401Z,1538715752.401 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:02:32.401Z,1538715752.401 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-10-05T05:02:32.401Z,1538715752.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:02:32.435Z,1538715752.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:02:32.435Z,1538715752.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:02:32.780Z,1538715752.780 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:02:32.780Z,1538715752.780 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-10-05T05:02:32.780Z,1538715752.780 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:02:32.781Z,1538715752.781 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-10-05T05:02:33.192Z,1538715753.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:02:33.193Z,1538715753.193 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:02:33.193Z,1538715753.193 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:02:33.194Z,1538715753.194 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:02:33.194Z,1538715753.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:02:33.195Z,1538715753.195 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:03:39.831Z,1538715819.831 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T05:03:39.831Z,1538715819.831 [NAL9602] No Fault, FailCount= 5
2018-10-05T05:03:40.135Z,1538715820.135 [NAL9602](INFO): Powering up NAL9602
2018-10-05T05:03:51.339Z,1538715831.339 [NAL9602](INFO): NAL9602 initialized
2018-10-05T05:03:56.201Z,1538715836.201 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T05:05:18.053Z,1538715918.053 [RDI_Pathfinder](ERROR): Failed to parse:
:BE,-32768,-32768,-32768,V
2018-10-05T05:05:33.272Z,1538715933.272 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:05:33.272Z,1538715933.272 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-10-05T05:05:33.272Z,1538715933.272 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:05:33.278Z,1538715933.278 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:05:33.278Z,1538715933.278 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-10-05T05:05:33.278Z,1538715933.278 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:05:33.304Z,1538715933.304 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:05:33.304Z,1538715933.304 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:05:33.674Z,1538715933.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:05:33.674Z,1538715933.674 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-10-05T05:05:33.675Z,1538715933.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:05:33.675Z,1538715933.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-10-05T05:05:34.066Z,1538715934.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:05:34.066Z,1538715934.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:05:34.066Z,1538715934.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:05:34.067Z,1538715934.067 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:05:34.067Z,1538715934.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:05:34.068Z,1538715934.068 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:06:42.034Z,1538716002.034 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T05:06:42.034Z,1538716002.034 [Default:CheckIn:C.Wait] Stopped
2018-10-05T05:06:42.034Z,1538716002.034 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T05:06:42.034Z,1538716002.034 [Default:CheckIn:D] Running Loop=1
2018-10-05T05:06:42.427Z,1538716002.427 [Default:CheckIn:D] Stopped
2018-10-05T05:06:42.427Z,1538716002.427 [Default:CheckIn:E] Running Loop=1
2018-10-05T05:06:42.833Z,1538716002.833 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1490.244271 min 
2018-10-05T05:06:42.833Z,1538716002.833 [Default:CheckIn:E] Stopped
2018-10-05T05:06:42.833Z,1538716002.833 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T05:06:42.834Z,1538716002.833 [Default:CheckIn] Stopped
2018-10-05T05:06:42.834Z,1538716002.834 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T05:06:42.834Z,1538716002.834 [Default:CheckIn](INFO): Running loop #145
2018-10-05T05:06:42.834Z,1538716002.834 [Default:CheckIn] Running Loop=145
2018-10-05T05:06:42.834Z,1538716002.834 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T05:06:42.834Z,1538716002.834 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T05:08:34.204Z,1538716114.204 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:08:34.204Z,1538716114.204 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-10-05T05:08:34.204Z,1538716114.204 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:08:34.211Z,1538716114.211 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:08:34.212Z,1538716114.212 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-10-05T05:08:34.212Z,1538716114.212 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:08:34.241Z,1538716114.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:08:34.242Z,1538716114.242 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:08:34.621Z,1538716114.621 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:08:34.622Z,1538716114.622 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-10-05T05:08:34.622Z,1538716114.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:08:34.622Z,1538716114.622 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-10-05T05:08:35.021Z,1538716115.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:08:35.022Z,1538716115.022 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:08:35.022Z,1538716115.022 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:08:35.022Z,1538716115.022 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:08:35.023Z,1538716115.023 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:08:35.023Z,1538716115.023 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:09:49.169Z,1538716189.169 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T05:09:49.170Z,1538716189.170 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,     ,        +0.00,        +0.00,   0.00,14645.06
2018-10-05T05:11:35.077Z,1538716295.077 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:11:35.078Z,1538716295.078 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-10-05T05:11:35.078Z,1538716295.078 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:11:35.080Z,1538716295.080 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:11:35.080Z,1538716295.080 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-10-05T05:11:35.080Z,1538716295.080 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:11:35.113Z,1538716295.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:11:35.113Z,1538716295.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:11:35.479Z,1538716295.479 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:11:35.480Z,1538716295.480 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-10-05T05:11:35.480Z,1538716295.480 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:11:35.480Z,1538716295.480 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-10-05T05:11:35.878Z,1538716295.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:11:35.879Z,1538716295.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:11:35.879Z,1538716295.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:11:35.880Z,1538716295.880 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:11:35.880Z,1538716295.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:11:35.880Z,1538716295.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:11:44.924Z,1538716304.924 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T05:06:42.8Z
2018-10-05T05:11:44.924Z,1538716304.924 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T05:11:44.924Z,1538716304.924 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T05:11:52.891Z,1538716312.891 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20181004T041305/Courier0436.lzma
2018-10-05T05:11:53.649Z,1538716313.649 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0436.lzma.bak
2018-10-05T05:11:53.649Z,1538716313.649 [DataOverHttps](INFO): SBD MOMSN=8611446
2018-10-05T05:12:02.845Z,1538716322.845 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0437.lzma
2018-10-05T05:12:03.629Z,1538716323.629 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0437.lzma.bak
2018-10-05T05:12:03.630Z,1538716323.630 [DataOverHttps](INFO): SBD MOMSN=8611449
2018-10-05T05:12:04.593Z,1538716324.593 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T05:12:04.593Z,1538716324.593 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T05:12:04.593Z,1538716324.593 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T05:13:54.721Z,1538716434.721 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T05:13:54.721Z,1538716434.721 [NAL9602] Data Fault, FailCount= 1
2018-10-05T05:13:54.721Z,1538716434.721 [NAL9602](ERROR): Data Fault
2018-10-05T05:13:54.802Z,1538716434.802 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T05:13:55.127Z,1538716435.127 [NAL9602](INFO): Powering down
2018-10-05T05:13:55.999Z,1538716435.999 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T05:13:55.999Z,1538716435.999 [NAL9602] No Fault, FailCount= 1
2018-10-05T05:14:25.515Z,1538716465.515 [NAL9602](INFO): Powering up NAL9602
2018-10-05T05:14:36.067Z,1538716476.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:14:36.067Z,1538716476.067 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2018-10-05T05:14:36.067Z,1538716476.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:14:36.069Z,1538716476.069 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:14:36.069Z,1538716476.069 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2018-10-05T05:14:36.069Z,1538716476.069 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:14:36.082Z,1538716476.082 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:14:36.082Z,1538716476.082 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:14:36.403Z,1538716476.403 [NAL9602](INFO): NAL9602 initialized
2018-10-05T05:14:36.454Z,1538716476.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:14:36.455Z,1538716476.455 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2018-10-05T05:14:36.455Z,1538716476.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:14:36.455Z,1538716476.455 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2018-10-05T05:14:36.852Z,1538716476.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:14:36.857Z,1538716476.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:14:36.857Z,1538716476.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:14:36.858Z,1538716476.858 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:14:36.858Z,1538716476.858 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:14:36.859Z,1538716476.859 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:17:04.714Z,1538716624.714 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T05:17:04.714Z,1538716624.714 [Default:CheckIn:C.Wait] Stopped
2018-10-05T05:17:04.715Z,1538716624.715 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T05:17:04.715Z,1538716624.715 [Default:CheckIn:D] Running Loop=1
2018-10-05T05:17:05.127Z,1538716625.127 [Default:CheckIn:D] Stopped
2018-10-05T05:17:05.127Z,1538716625.127 [Default:CheckIn:E] Running Loop=1
2018-10-05T05:17:05.529Z,1538716625.529 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1500.622656 min 
2018-10-05T05:17:05.529Z,1538716625.529 [Default:CheckIn:E] Stopped
2018-10-05T05:17:05.530Z,1538716625.530 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T05:17:05.530Z,1538716625.530 [Default:CheckIn] Stopped
2018-10-05T05:17:05.530Z,1538716625.530 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T05:17:05.530Z,1538716625.530 [Default:CheckIn](INFO): Running loop #146
2018-10-05T05:17:05.530Z,1538716625.530 [Default:CheckIn] Running Loop=146
2018-10-05T05:17:05.530Z,1538716625.530 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T05:17:05.530Z,1538716625.530 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T05:17:36.854Z,1538716656.854 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:17:36.854Z,1538716656.854 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2018-10-05T05:17:36.854Z,1538716656.854 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:17:36.889Z,1538716656.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:17:37.243Z,1538716657.243 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:17:37.243Z,1538716657.243 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2018-10-05T05:17:37.243Z,1538716657.243 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:17:37.265Z,1538716657.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:17:37.265Z,1538716657.265 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2018-10-05T05:17:37.266Z,1538716657.266 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:17:37.646Z,1538716657.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:17:37.646Z,1538716657.646 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:17:37.646Z,1538716657.646 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:17:37.665Z,1538716657.665 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:17:37.665Z,1538716657.665 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2018-10-05T05:17:38.038Z,1538716658.038 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:17:38.039Z,1538716658.039 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:17:38.039Z,1538716658.039 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:20:38.014Z,1538716838.014 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:20:38.014Z,1538716838.014 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2018-10-05T05:20:38.014Z,1538716838.014 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:20:38.052Z,1538716838.052 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:20:38.410Z,1538716838.410 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:20:38.410Z,1538716838.410 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2018-10-05T05:20:38.410Z,1538716838.410 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:20:38.440Z,1538716838.440 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:20:38.440Z,1538716838.440 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2018-10-05T05:20:38.441Z,1538716838.441 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:20:38.841Z,1538716838.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:20:38.842Z,1538716838.842 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:20:38.842Z,1538716838.842 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:20:38.855Z,1538716838.855 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:20:38.855Z,1538716838.855 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2018-10-05T05:20:39.214Z,1538716839.214 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:20:39.214Z,1538716839.214 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:20:39.214Z,1538716839.214 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:22:08.087Z,1538716928.087 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T05:17:05.5Z
2018-10-05T05:22:08.087Z,1538716928.087 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T05:22:08.087Z,1538716928.087 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T05:22:13.004Z,1538716933.004 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0439.lzma
2018-10-05T05:22:15.239Z,1538716935.239 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0439.lzma.bak
2018-10-05T05:22:15.239Z,1538716935.239 [DataOverHttps](INFO): SBD MOMSN=8611453
2018-10-05T05:22:24.304Z,1538716944.304 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0440.lzma
2018-10-05T05:22:25.077Z,1538716945.077 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0440.lzma.bak
2018-10-05T05:22:25.077Z,1538716945.077 [DataOverHttps](INFO): SBD MOMSN=8611455
2018-10-05T05:22:25.122Z,1538716945.122 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T05:22:25.123Z,1538716945.123 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-3276,-32768,-32768,V
2018-10-05T05:22:26.049Z,1538716946.049 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T05:22:26.049Z,1538716946.049 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T05:22:26.049Z,1538716946.049 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T05:23:40.021Z,1538717020.021 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:23:40.021Z,1538717020.021 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2018-10-05T05:23:40.021Z,1538717020.021 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:23:40.023Z,1538717020.023 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:23:40.023Z,1538717020.023 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2018-10-05T05:23:40.023Z,1538717020.023 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:23:40.036Z,1538717020.036 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:23:40.069Z,1538717020.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:23:40.199Z,1538717020.199 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:23:40.199Z,1538717020.199 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2018-10-05T05:23:40.199Z,1538717020.199 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:23:40.199Z,1538717020.199 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2018-10-05T05:23:40.538Z,1538717020.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:23:40.538Z,1538717020.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:23:40.539Z,1538717020.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:23:40.539Z,1538717020.539 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:23:40.539Z,1538717020.539 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:23:40.540Z,1538717020.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:24:37.399Z,1538717077.399 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T05:24:37.399Z,1538717077.399 [NAL9602] Data Fault, FailCount= 2
2018-10-05T05:24:37.399Z,1538717077.399 [NAL9602](ERROR): Data Fault
2018-10-05T05:24:37.473Z,1538717077.473 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T05:24:37.799Z,1538717077.799 [NAL9602](INFO): Powering down
2018-10-05T05:24:38.643Z,1538717078.643 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T05:24:38.643Z,1538717078.643 [NAL9602] No Fault, FailCount= 2
2018-10-05T05:25:07.847Z,1538717107.847 [NAL9602](INFO): Powering up NAL9602
2018-10-05T05:25:19.047Z,1538717119.047 [NAL9602](INFO): NAL9602 initialized
2018-10-05T05:26:40.985Z,1538717200.985 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:26:40.985Z,1538717200.985 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2018-10-05T05:26:40.985Z,1538717200.985 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:26:40.987Z,1538717200.987 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:26:40.987Z,1538717200.987 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2018-10-05T05:26:40.987Z,1538717200.987 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:26:41.061Z,1538717201.061 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:26:41.062Z,1538717201.062 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:26:41.347Z,1538717201.347 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:26:41.347Z,1538717201.347 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2018-10-05T05:26:41.348Z,1538717201.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:26:41.348Z,1538717201.348 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2018-10-05T05:26:41.698Z,1538717201.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:26:41.698Z,1538717201.698 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:26:41.699Z,1538717201.699 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:26:41.699Z,1538717201.699 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:26:41.699Z,1538717201.699 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:26:41.700Z,1538717201.700 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:27:26.204Z,1538717246.204 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T05:27:26.209Z,1538717246.209 [Default:CheckIn:C.Wait] Stopped
2018-10-05T05:27:26.209Z,1538717246.209 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T05:27:26.209Z,1538717246.209 [Default:CheckIn:D] Running Loop=1
2018-10-05T05:27:26.605Z,1538717246.605 [Default:CheckIn:D] Stopped
2018-10-05T05:27:26.605Z,1538717246.605 [Default:CheckIn:E] Running Loop=1
2018-10-05T05:27:27.026Z,1538717247.026 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1510.980599 min 
2018-10-05T05:27:27.026Z,1538717247.026 [Default:CheckIn:E] Stopped
2018-10-05T05:27:27.027Z,1538717247.027 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T05:27:27.027Z,1538717247.027 [Default:CheckIn] Stopped
2018-10-05T05:27:27.027Z,1538717247.027 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T05:27:27.027Z,1538717247.027 [Default:CheckIn](INFO): Running loop #147
2018-10-05T05:27:27.027Z,1538717247.027 [Default:CheckIn] Running Loop=147
2018-10-05T05:27:27.027Z,1538717247.027 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T05:27:27.027Z,1538717247.027 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T05:29:41.723Z,1538717381.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:29:41.723Z,1538717381.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2018-10-05T05:29:41.723Z,1538717381.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:29:41.725Z,1538717381.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:29:41.725Z,1538717381.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2018-10-05T05:29:41.726Z,1538717381.726 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:29:41.755Z,1538717381.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:29:41.755Z,1538717381.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:29:42.151Z,1538717382.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:29:42.151Z,1538717382.151 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2018-10-05T05:29:42.151Z,1538717382.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:29:42.151Z,1538717382.151 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2018-10-05T05:29:42.490Z,1538717382.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:29:42.491Z,1538717382.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:29:42.491Z,1538717382.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:29:42.492Z,1538717382.492 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:29:42.492Z,1538717382.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:29:42.492Z,1538717382.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:32:29.207Z,1538717549.207 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T05:27:27.0Z
2018-10-05T05:32:29.207Z,1538717549.207 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T05:32:29.207Z,1538717549.207 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T05:32:34.140Z,1538717554.140 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0442.lzma
2018-10-05T05:32:34.923Z,1538717554.923 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0442.lzma.bak
2018-10-05T05:32:34.924Z,1538717554.924 [DataOverHttps](INFO): SBD MOMSN=8611459
2018-10-05T05:32:44.040Z,1538717564.040 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:32:44.040Z,1538717564.040 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2018-10-05T05:32:44.040Z,1538717564.040 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:32:44.042Z,1538717564.042 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:32:44.042Z,1538717564.042 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2018-10-05T05:32:44.042Z,1538717564.042 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:32:44.058Z,1538717564.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:32:44.058Z,1538717564.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:32:49.011Z,1538717569.011 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0443.lzma
2018-10-05T05:32:49.234Z,1538717569.234 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:32:49.234Z,1538717569.234 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2018-10-05T05:32:49.235Z,1538717569.235 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:32:49.235Z,1538717569.235 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2018-10-05T05:32:49.401Z,1538717569.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:32:49.401Z,1538717569.401 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:32:49.402Z,1538717569.402 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:32:49.402Z,1538717569.402 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:32:49.403Z,1538717569.403 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:32:49.403Z,1538717569.403 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:32:49.658Z,1538717569.658 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0443.lzma.bak
2018-10-05T05:32:49.658Z,1538717569.658 [DataOverHttps](INFO): SBD MOMSN=8611461
2018-10-05T05:32:50.610Z,1538717570.610 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T05:32:50.610Z,1538717570.610 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T05:32:50.610Z,1538717570.610 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T05:35:20.691Z,1538717720.691 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T05:35:20.691Z,1538717720.691 [NAL9602] Data Fault, FailCount= 3
2018-10-05T05:35:20.691Z,1538717720.691 [NAL9602](ERROR): Data Fault
2018-10-05T05:35:20.783Z,1538717720.783 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T05:35:21.091Z,1538717721.091 [NAL9602](INFO): Powering down
2018-10-05T05:35:21.971Z,1538717721.971 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T05:35:21.971Z,1538717721.971 [NAL9602] No Fault, FailCount= 3
2018-10-05T05:35:50.707Z,1538717750.707 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:35:50.707Z,1538717750.707 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2018-10-05T05:35:50.708Z,1538717750.708 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:35:50.709Z,1538717750.709 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:35:50.710Z,1538717750.710 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2018-10-05T05:35:50.710Z,1538717750.710 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:35:50.788Z,1538717750.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:35:50.788Z,1538717750.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:35:50.914Z,1538717750.914 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:35:50.914Z,1538717750.914 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2018-10-05T05:35:50.915Z,1538717750.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:35:50.915Z,1538717750.915 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2018-10-05T05:35:51.211Z,1538717751.211 [NAL9602](INFO): Powering up NAL9602
2018-10-05T05:35:51.258Z,1538717751.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:35:51.258Z,1538717751.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:35:51.259Z,1538717751.259 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:35:51.259Z,1538717751.259 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:35:51.259Z,1538717751.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:35:51.260Z,1538717751.260 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:36:02.407Z,1538717762.407 [NAL9602](INFO): NAL9602 initialized
2018-10-05T05:37:50.912Z,1538717870.912 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T05:37:50.913Z,1538717870.913 [Default:CheckIn:C.Wait] Stopped
2018-10-05T05:37:50.913Z,1538717870.913 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T05:37:50.913Z,1538717870.913 [Default:CheckIn:D] Running Loop=1
2018-10-05T05:37:51.297Z,1538717871.297 [Default:CheckIn:D] Stopped
2018-10-05T05:37:51.297Z,1538717871.297 [Default:CheckIn:E] Running Loop=1
2018-10-05T05:37:51.686Z,1538717871.686 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1521.392057 min 
2018-10-05T05:37:51.686Z,1538717871.686 [Default:CheckIn:E] Stopped
2018-10-05T05:37:51.686Z,1538717871.686 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T05:37:51.686Z,1538717871.686 [Default:CheckIn] Stopped
2018-10-05T05:37:51.686Z,1538717871.686 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T05:37:51.687Z,1538717871.687 [Default:CheckIn](INFO): Running loop #148
2018-10-05T05:37:51.687Z,1538717871.687 [Default:CheckIn] Running Loop=148
2018-10-05T05:37:51.687Z,1538717871.687 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T05:37:51.687Z,1538717871.687 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T05:38:51.486Z,1538717931.486 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:38:51.486Z,1538717931.486 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2018-10-05T05:38:51.486Z,1538717931.486 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:38:51.488Z,1538717931.488 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:38:51.489Z,1538717931.489 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2018-10-05T05:38:51.489Z,1538717931.489 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:38:51.502Z,1538717931.502 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:38:51.502Z,1538717931.502 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:38:51.910Z,1538717931.910 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:38:51.910Z,1538717931.910 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2018-10-05T05:38:51.911Z,1538717931.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:38:51.912Z,1538717931.912 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2018-10-05T05:38:52.281Z,1538717932.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:38:52.281Z,1538717932.281 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:38:52.282Z,1538717932.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:38:52.282Z,1538717932.282 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:38:52.283Z,1538717932.283 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:38:52.283Z,1538717932.283 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:39:25.145Z,1538717965.145 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T05:39:25.145Z,1538717965.145 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-3278,-32768,-32768,V
2018-10-05T05:41:52.627Z,1538718112.627 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:41:52.628Z,1538718112.628 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2018-10-05T05:41:52.628Z,1538718112.628 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:41:52.638Z,1538718112.638 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:41:52.638Z,1538718112.638 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2018-10-05T05:41:52.638Z,1538718112.638 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:41:52.663Z,1538718112.663 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:41:52.663Z,1538718112.663 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:41:53.100Z,1538718113.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:41:53.100Z,1538718113.100 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2018-10-05T05:41:53.105Z,1538718113.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:41:53.105Z,1538718113.105 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2018-10-05T05:41:53.470Z,1538718113.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:41:53.470Z,1538718113.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:41:53.470Z,1538718113.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:41:53.471Z,1538718113.471 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:41:53.471Z,1538718113.471 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:41:53.472Z,1538718113.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:42:53.952Z,1538718173.952 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T05:37:51.7Z
2018-10-05T05:42:53.952Z,1538718173.952 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T05:42:53.952Z,1538718173.953 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T05:42:59.040Z,1538718179.040 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0445.lzma
2018-10-05T05:42:59.825Z,1538718179.825 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0445.lzma.bak
2018-10-05T05:42:59.826Z,1538718179.826 [DataOverHttps](INFO): SBD MOMSN=8611465
2018-10-05T05:43:09.401Z,1538718189.401 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0446.lzma
2018-10-05T05:43:10.193Z,1538718190.193 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0446.lzma.bak
2018-10-05T05:43:10.193Z,1538718190.193 [DataOverHttps](INFO): SBD MOMSN=8611467
2018-10-05T05:43:11.159Z,1538718191.159 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T05:43:11.159Z,1538718191.159 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T05:43:11.159Z,1538718191.159 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T05:44:53.609Z,1538718293.609 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:44:53.609Z,1538718293.609 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2018-10-05T05:44:53.609Z,1538718293.609 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:44:53.611Z,1538718293.611 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:44:53.611Z,1538718293.611 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2018-10-05T05:44:53.611Z,1538718293.611 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:44:53.636Z,1538718293.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:44:53.637Z,1538718293.637 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:44:54.048Z,1538718294.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:44:54.049Z,1538718294.049 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2018-10-05T05:44:54.054Z,1538718294.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:44:54.054Z,1538718294.054 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2018-10-05T05:44:54.450Z,1538718294.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:44:54.450Z,1538718294.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:44:54.451Z,1538718294.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:44:54.451Z,1538718294.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:44:54.452Z,1538718294.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:44:54.452Z,1538718294.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:46:04.291Z,1538718364.291 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T05:46:04.291Z,1538718364.291 [NAL9602] Data Fault, FailCount= 4
2018-10-05T05:46:04.292Z,1538718364.292 [NAL9602](ERROR): Data Fault
2018-10-05T05:46:04.375Z,1538718364.375 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T05:46:04.687Z,1538718364.687 [NAL9602](INFO): Powering down
2018-10-05T05:46:05.551Z,1538718365.551 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T05:46:05.551Z,1538718365.551 [NAL9602] No Fault, FailCount= 4
2018-10-05T05:46:34.803Z,1538718394.803 [NAL9602](INFO): Powering up NAL9602
2018-10-05T05:46:46.875Z,1538718406.875 [NAL9602](INFO): NAL9602 initialized
2018-10-05T05:47:16.126Z,1538718436.126 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T05:47:16.127Z,1538718436.127 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,32768,-32768,-32768,V
2018-10-05T05:47:56.998Z,1538718476.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:47:56.998Z,1538718476.998 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2018-10-05T05:47:56.998Z,1538718476.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:47:57.000Z,1538718477.000 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:47:57.000Z,1538718477.000 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2018-10-05T05:47:57.000Z,1538718477.000 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:47:57.041Z,1538718477.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:47:57.041Z,1538718477.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:47:57.155Z,1538718477.155 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:47:57.155Z,1538718477.155 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2018-10-05T05:47:57.156Z,1538718477.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:47:57.156Z,1538718477.156 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2018-10-05T05:47:57.506Z,1538718477.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:47:57.506Z,1538718477.506 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:47:57.507Z,1538718477.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:47:57.507Z,1538718477.507 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:47:57.507Z,1538718477.507 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:47:57.508Z,1538718477.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:48:11.534Z,1538718491.534 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T05:48:11.534Z,1538718491.534 [Default:CheckIn:C.Wait] Stopped
2018-10-05T05:48:11.534Z,1538718491.534 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T05:48:11.534Z,1538718491.534 [Default:CheckIn:D] Running Loop=1
2018-10-05T05:48:11.945Z,1538718491.945 [Default:CheckIn:D] Stopped
2018-10-05T05:48:11.945Z,1538718491.945 [Default:CheckIn:E] Running Loop=1
2018-10-05T05:48:12.311Z,1538718492.311 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1531.736328 min 
2018-10-05T05:48:12.311Z,1538718492.311 [Default:CheckIn:E] Stopped
2018-10-05T05:48:12.311Z,1538718492.311 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T05:48:12.311Z,1538718492.311 [Default:CheckIn] Stopped
2018-10-05T05:48:12.312Z,1538718492.312 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T05:48:12.312Z,1538718492.312 [Default:CheckIn](INFO): Running loop #149
2018-10-05T05:48:12.312Z,1538718492.312 [Default:CheckIn] Running Loop=149
2018-10-05T05:48:12.312Z,1538718492.312 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T05:48:12.312Z,1538718492.312 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T05:50:57.555Z,1538718657.555 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:50:57.555Z,1538718657.555 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2018-10-05T05:50:57.555Z,1538718657.555 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:50:57.557Z,1538718657.557 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:50:57.558Z,1538718657.558 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2018-10-05T05:50:57.558Z,1538718657.558 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:50:57.571Z,1538718657.571 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:50:57.571Z,1538718657.571 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:50:57.000Z,1538718658.000 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:50:58.000Z,1538718658.000 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2018-10-05T05:50:58.001Z,1538718658.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:50:58.001Z,1538718658.001 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2018-10-05T05:50:58.366Z,1538718658.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:50:58.366Z,1538718658.366 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:50:58.367Z,1538718658.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:50:58.367Z,1538718658.367 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:50:58.368Z,1538718658.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:50:58.368Z,1538718658.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:53:14.513Z,1538718794.513 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T05:48:12.3Z
2018-10-05T05:53:14.513Z,1538718794.513 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T05:53:14.513Z,1538718794.513 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T05:53:19.438Z,1538718799.438 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0448.lzma
2018-10-05T05:53:20.221Z,1538718800.221 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0448.lzma.bak
2018-10-05T05:53:20.221Z,1538718800.221 [DataOverHttps](INFO): SBD MOMSN=8611471
2018-10-05T05:53:30.970Z,1538718810.970 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0449.lzma
2018-10-05T05:53:32.436Z,1538718812.436 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0449.lzma.bak
2018-10-05T05:53:32.436Z,1538718812.436 [DataOverHttps](INFO): SBD MOMSN=8611473
2018-10-05T05:53:33.288Z,1538718813.288 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T05:53:33.289Z,1538718813.289 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T05:53:33.306Z,1538718813.306 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T05:53:37.996Z,1538718817.996 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.894, -0.002, 0.000
2018-10-05T05:53:58.404Z,1538718838.404 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:53:58.404Z,1538718838.404 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2018-10-05T05:53:58.404Z,1538718838.404 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:53:58.410Z,1538718838.410 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:53:58.410Z,1538718838.410 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2018-10-05T05:53:58.410Z,1538718838.410 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:53:58.435Z,1538718838.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:53:58.436Z,1538718838.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:53:58.847Z,1538718838.847 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:53:58.847Z,1538718838.847 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2018-10-05T05:53:58.848Z,1538718838.848 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:53:58.848Z,1538718838.848 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2018-10-05T05:53:59.206Z,1538718839.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:53:59.206Z,1538718839.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:53:59.207Z,1538718839.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:53:59.207Z,1538718839.207 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:53:59.207Z,1538718839.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:53:59.208Z,1538718839.208 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:56:49.737Z,1538719009.737 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T05:56:49.738Z,1538719009.738 [NAL9602] Data Fault, FailCount= 5
2018-10-05T05:56:49.738Z,1538719009.738 [NAL9602](ERROR): Data Fault
2018-10-05T05:56:49.831Z,1538719009.831 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T05:56:49.832Z,1538719009.832 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T05:56:50.123Z,1538719010.123 [NAL9602](INFO): Powering down
2018-10-05T05:56:50.205Z,1538719010.205 [CBIT](INFO): Critical error at 20181005T055649
2018-10-05T05:56:59.359Z,1538719019.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:56:59.359Z,1538719019.359 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2018-10-05T05:56:59.359Z,1538719019.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T05:56:59.361Z,1538719019.361 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T05:56:59.361Z,1538719019.361 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2018-10-05T05:56:59.361Z,1538719019.361 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T05:56:59.413Z,1538719019.413 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T05:56:59.414Z,1538719019.414 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T05:56:59.811Z,1538719019.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T05:56:59.811Z,1538719019.811 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2018-10-05T05:56:59.812Z,1538719019.812 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T05:56:59.812Z,1538719019.812 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2018-10-05T05:57:00.166Z,1538719020.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T05:57:00.167Z,1538719020.167 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:57:00.167Z,1538719020.167 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:57:00.168Z,1538719020.168 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T05:57:00.168Z,1538719020.168 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T05:57:00.168Z,1538719020.168 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T05:58:33.625Z,1538719113.625 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T05:58:33.629Z,1538719113.629 [Default:CheckIn:C.Wait] Stopped
2018-10-05T05:58:33.629Z,1538719113.629 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T05:58:33.629Z,1538719113.629 [Default:CheckIn:D] Running Loop=1
2018-10-05T05:58:34.025Z,1538719114.025 [Default:CheckIn:D] Stopped
2018-10-05T05:58:34.025Z,1538719114.025 [Default:CheckIn:E] Running Loop=1
2018-10-05T05:58:34.438Z,1538719114.438 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1542.104297 min 
2018-10-05T05:58:34.438Z,1538719114.438 [Default:CheckIn:E] Stopped
2018-10-05T05:58:34.438Z,1538719114.438 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T05:58:34.439Z,1538719114.439 [Default:CheckIn] Stopped
2018-10-05T05:58:34.439Z,1538719114.439 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T05:58:34.439Z,1538719114.439 [Default:CheckIn](INFO): Running loop #150
2018-10-05T05:58:34.439Z,1538719114.439 [Default:CheckIn] Running Loop=150
2018-10-05T05:58:34.439Z,1538719114.439 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T05:58:34.439Z,1538719114.439 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T05:58:50.064Z,1538719130.064 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T05:58:50.064Z,1538719130.064 [NAL9602] No Fault, FailCount= 5
2018-10-05T05:58:50.395Z,1538719130.395 [NAL9602](INFO): Powering up NAL9602
2018-10-05T05:59:01.255Z,1538719141.255 [NAL9602](INFO): NAL9602 initialized
2018-10-05T06:00:00.194Z,1538719200.194 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:00:00.194Z,1538719200.194 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2018-10-05T06:00:00.195Z,1538719200.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:00:00.196Z,1538719200.196 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:00:00.196Z,1538719200.196 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2018-10-05T06:00:00.197Z,1538719200.197 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:00:00.238Z,1538719200.238 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:00:00.238Z,1538719200.238 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:00:00.600Z,1538719200.600 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:00:00.600Z,1538719200.600 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2018-10-05T06:00:00.601Z,1538719200.601 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:00:00.601Z,1538719200.601 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2018-10-05T06:00:00.990Z,1538719200.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:00:00.991Z,1538719200.991 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:00:00.991Z,1538719200.991 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:00:00.992Z,1538719200.992 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:00:00.992Z,1538719200.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:00:00.992Z,1538719200.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:00:37.104Z,1538719237.104 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T06:00:37.104Z,1538719237.104 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100423053432,35.0, -0.1,448.9,  0
2018-10-05T06:03:01.524Z,1538719381.524 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:03:01.524Z,1538719381.524 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2018-10-05T06:03:01.524Z,1538719381.524 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:03:01.526Z,1538719381.526 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:03:01.526Z,1538719381.526 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2018-10-05T06:03:01.526Z,1538719381.526 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:03:01.540Z,1538719381.540 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:03:01.541Z,1538719381.541 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:03:01.663Z,1538719381.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:03:01.663Z,1538719381.663 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2018-10-05T06:03:01.663Z,1538719381.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:03:01.663Z,1538719381.663 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2018-10-05T06:03:02.017Z,1538719382.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:03:02.018Z,1538719382.018 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:03:02.018Z,1538719382.018 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:03:02.019Z,1538719382.019 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:03:02.019Z,1538719382.019 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:03:02.019Z,1538719382.019 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:03:36.841Z,1538719416.841 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T05:58:34.4Z
2018-10-05T06:03:36.841Z,1538719416.841 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T06:03:36.841Z,1538719416.841 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T06:03:41.763Z,1538719421.763 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0451.lzma
2018-10-05T06:03:42.537Z,1538719422.537 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0451.lzma.bak
2018-10-05T06:03:42.537Z,1538719422.537 [DataOverHttps](INFO): SBD MOMSN=8611477
2018-10-05T06:03:51.806Z,1538719431.806 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0452.lzma
2018-10-05T06:03:52.581Z,1538719432.581 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0452.lzma.bak
2018-10-05T06:03:52.581Z,1538719432.581 [DataOverHttps](INFO): SBD MOMSN=8611480
2018-10-05T06:03:53.564Z,1538719433.564 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T06:03:53.564Z,1538719433.564 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T06:03:53.564Z,1538719433.564 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T06:06:02.095Z,1538719562.095 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:06:02.095Z,1538719562.095 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2018-10-05T06:06:02.095Z,1538719562.095 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:06:02.097Z,1538719562.097 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:06:02.097Z,1538719562.097 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2018-10-05T06:06:02.097Z,1538719562.097 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:06:02.126Z,1538719562.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:06:02.127Z,1538719562.127 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:06:02.491Z,1538719562.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:06:02.491Z,1538719562.491 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2018-10-05T06:06:02.491Z,1538719562.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:06:02.491Z,1538719562.491 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2018-10-05T06:06:02.878Z,1538719562.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:06:02.878Z,1538719562.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:06:02.879Z,1538719562.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:06:02.879Z,1538719562.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:06:02.880Z,1538719562.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:06:02.880Z,1538719562.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:08:54.036Z,1538719734.036 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T06:08:54.038Z,1538719734.038 [Default:CheckIn:C.Wait] Stopped
2018-10-05T06:08:54.038Z,1538719734.038 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T06:08:54.038Z,1538719734.038 [Default:CheckIn:D] Running Loop=1
2018-10-05T06:08:54.434Z,1538719734.434 [Default:CheckIn:D] Stopped
2018-10-05T06:08:54.434Z,1538719734.434 [Default:CheckIn:E] Running Loop=1
2018-10-05T06:08:54.822Z,1538719734.822 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1552.444401 min 
2018-10-05T06:08:54.822Z,1538719734.822 [Default:CheckIn:E] Stopped
2018-10-05T06:08:54.822Z,1538719734.822 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T06:08:54.823Z,1538719734.823 [Default:CheckIn] Stopped
2018-10-05T06:08:54.823Z,1538719734.823 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T06:08:54.823Z,1538719734.823 [Default:CheckIn](INFO): Running loop #151
2018-10-05T06:08:54.823Z,1538719734.823 [Default:CheckIn] Running Loop=151
2018-10-05T06:08:54.823Z,1538719734.823 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T06:08:54.823Z,1538719734.823 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T06:09:02.759Z,1538719742.759 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T06:09:02.759Z,1538719742.759 [NAL9602] Data Fault, FailCount= 1
2018-10-05T06:09:02.759Z,1538719742.759 [NAL9602](ERROR): Data Fault
2018-10-05T06:09:02.825Z,1538719742.825 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T06:09:03.163Z,1538719743.163 [NAL9602](INFO): Powering down
2018-10-05T06:09:03.223Z,1538719743.223 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:09:03.223Z,1538719743.223 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2018-10-05T06:09:03.224Z,1538719743.224 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:09:03.230Z,1538719743.230 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:09:03.230Z,1538719743.230 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2018-10-05T06:09:03.230Z,1538719743.230 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:09:03.247Z,1538719743.247 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:09:03.248Z,1538719743.248 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:09:03.619Z,1538719743.619 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:09:03.619Z,1538719743.619 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2018-10-05T06:09:03.620Z,1538719743.620 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:09:03.620Z,1538719743.620 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2018-10-05T06:09:03.999Z,1538719743.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:09:03.000Z,1538719744.000 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:09:04.001Z,1538719744.001 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:09:04.005Z,1538719744.005 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:09:04.006Z,1538719744.006 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:09:04.006Z,1538719744.006 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:09:04.034Z,1538719744.034 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T06:09:04.034Z,1538719744.034 [NAL9602] No Fault, FailCount= 1
2018-10-05T06:09:33.255Z,1538719773.255 [NAL9602](INFO): Powering up NAL9602
2018-10-05T06:09:44.451Z,1538719784.451 [NAL9602](INFO): NAL9602 initialized
2018-10-05T06:09:51.080Z,1538719791.080 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-05T06:11:25.763Z,1538719885.763 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T06:12:04.285Z,1538719924.285 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:12:04.286Z,1538719924.286 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2018-10-05T06:12:04.286Z,1538719924.286 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:12:04.288Z,1538719924.288 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:12:04.288Z,1538719924.288 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2018-10-05T06:12:04.288Z,1538719924.288 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:12:04.317Z,1538719924.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:12:04.318Z,1538719924.318 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:12:04.735Z,1538719924.735 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:12:04.735Z,1538719924.735 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2018-10-05T06:12:04.736Z,1538719924.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:12:04.736Z,1538719924.736 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2018-10-05T06:12:05.094Z,1538719925.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:12:05.094Z,1538719925.094 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:12:05.094Z,1538719925.094 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:12:05.095Z,1538719925.095 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:12:05.095Z,1538719925.095 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:12:05.096Z,1538719925.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:13:56.931Z,1538720036.931 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T06:08:54.8Z
2018-10-05T06:13:56.931Z,1538720036.931 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T06:13:56.931Z,1538720036.931 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T06:14:01.878Z,1538720041.878 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0454.lzma
2018-10-05T06:14:02.638Z,1538720042.638 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0454.lzma.bak
2018-10-05T06:14:02.638Z,1538720042.638 [DataOverHttps](INFO): SBD MOMSN=8611484
2018-10-05T06:14:11.841Z,1538720051.841 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0455.lzma
2018-10-05T06:14:12.617Z,1538720052.617 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0455.lzma.bak
2018-10-05T06:14:12.617Z,1538720052.617 [DataOverHttps](INFO): SBD MOMSN=8611486
2018-10-05T06:14:13.574Z,1538720053.574 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T06:14:13.574Z,1538720053.574 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T06:14:13.574Z,1538720053.574 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T06:15:05.126Z,1538720105.126 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:15:05.126Z,1538720105.126 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2018-10-05T06:15:05.126Z,1538720105.126 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:15:05.128Z,1538720105.128 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:15:05.128Z,1538720105.128 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2018-10-05T06:15:05.128Z,1538720105.128 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:15:05.158Z,1538720105.158 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:15:05.158Z,1538720105.158 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:15:05.539Z,1538720105.539 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:15:05.539Z,1538720105.539 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2018-10-05T06:15:05.540Z,1538720105.540 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:15:05.540Z,1538720105.540 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2018-10-05T06:15:05.946Z,1538720105.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:15:05.946Z,1538720105.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:15:05.946Z,1538720105.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:15:05.947Z,1538720105.947 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:15:05.947Z,1538720105.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:15:05.948Z,1538720105.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:17:31.871Z,1538720251.871 [RDI_Pathfinder](ERROR): Failed to parse:
:8,-32768,-2768,V
2018-10-05T06:17:42.228Z,1538720262.228 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T06:17:42.229Z,1538720262.229 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100423223, -0.1,   0.0,1448.9,  0
2018-10-05T06:18:05.988Z,1538720285.988 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:18:05.988Z,1538720285.988 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2018-10-05T06:18:05.988Z,1538720285.988 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:18:05.990Z,1538720285.990 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:18:05.990Z,1538720285.990 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2018-10-05T06:18:05.990Z,1538720285.990 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:18:06.003Z,1538720286.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:18:06.004Z,1538720286.004 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:18:06.396Z,1538720286.396 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:18:06.396Z,1538720286.396 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2018-10-05T06:18:06.397Z,1538720286.397 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:18:06.397Z,1538720286.397 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2018-10-05T06:18:06.790Z,1538720286.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:18:06.790Z,1538720286.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:18:06.791Z,1538720286.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:18:06.791Z,1538720286.791 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:18:06.791Z,1538720286.791 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:18:06.792Z,1538720286.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:19:13.728Z,1538720353.728 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T06:19:13.733Z,1538720353.733 [Default:CheckIn:C.Wait] Stopped
2018-10-05T06:19:13.733Z,1538720353.733 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T06:19:13.733Z,1538720353.733 [Default:CheckIn:D] Running Loop=1
2018-10-05T06:19:14.147Z,1538720354.147 [Default:CheckIn:D] Stopped
2018-10-05T06:19:14.147Z,1538720354.147 [Default:CheckIn:E] Running Loop=1
2018-10-05T06:19:14.541Z,1538720354.541 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1562.773047 min 
2018-10-05T06:19:14.542Z,1538720354.542 [Default:CheckIn:E] Stopped
2018-10-05T06:19:14.542Z,1538720354.542 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T06:19:14.542Z,1538720354.542 [Default:CheckIn] Stopped
2018-10-05T06:19:14.542Z,1538720354.542 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T06:19:14.542Z,1538720354.542 [Default:CheckIn](INFO): Running loop #152
2018-10-05T06:19:14.542Z,1538720354.542 [Default:CheckIn] Running Loop=152
2018-10-05T06:19:14.542Z,1538720354.542 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T06:19:14.542Z,1538720354.542 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T06:19:45.359Z,1538720385.359 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T06:19:45.359Z,1538720385.359 [NAL9602] Data Fault, FailCount= 2
2018-10-05T06:19:45.359Z,1538720385.359 [NAL9602](ERROR): Data Fault
2018-10-05T06:19:45.431Z,1538720385.431 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T06:19:45.759Z,1538720385.759 [NAL9602](INFO): Powering down
2018-10-05T06:19:46.642Z,1538720386.642 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T06:19:46.643Z,1538720386.643 [NAL9602] No Fault, FailCount= 2
2018-10-05T06:20:15.837Z,1538720415.837 [NAL9602](INFO): Powering up NAL9602
2018-10-05T06:20:17.891Z,1538720417.891 [RDI_Pathfinder](ERROR): Failed to parse:
d, 15.934, 0.005, 65.535
2018-10-05T06:20:26.644Z,1538720426.644 [NAL9602](INFO): NAL9602 initialized
2018-10-05T06:21:06.799Z,1538720466.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:21:06.799Z,1538720466.799 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2018-10-05T06:21:06.799Z,1538720466.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:21:06.805Z,1538720466.805 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:21:06.805Z,1538720466.805 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2018-10-05T06:21:06.805Z,1538720466.805 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:21:06.838Z,1538720466.838 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:21:06.838Z,1538720466.838 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:21:07.204Z,1538720467.204 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:21:07.204Z,1538720467.204 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2018-10-05T06:21:07.205Z,1538720467.205 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:21:07.205Z,1538720467.205 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2018-10-05T06:21:07.594Z,1538720467.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:21:07.594Z,1538720467.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:21:07.595Z,1538720467.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:21:07.595Z,1538720467.595 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:21:07.595Z,1538720467.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:21:07.596Z,1538720467.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:24:07.601Z,1538720647.601 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:24:07.601Z,1538720647.601 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2018-10-05T06:24:07.601Z,1538720647.601 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:24:07.603Z,1538720647.603 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:24:07.603Z,1538720647.603 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2018-10-05T06:24:07.603Z,1538720647.603 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:24:07.617Z,1538720647.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:24:07.618Z,1538720647.618 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:24:07.618Z,1538720647.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:24:07.619Z,1538720647.619 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:24:16.839Z,1538720656.839 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T06:19:14.5Z
2018-10-05T06:24:16.839Z,1538720656.839 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T06:24:16.839Z,1538720656.839 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T06:24:21.753Z,1538720661.753 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0457.lzma
2018-10-05T06:24:22.530Z,1538720662.530 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0457.lzma.bak
2018-10-05T06:24:22.530Z,1538720662.530 [DataOverHttps](INFO): SBD MOMSN=8611490
2018-10-05T06:24:31.769Z,1538720671.769 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20181004T041305/Express0458.lzma
2018-10-05T06:24:32.553Z,1538720672.553 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0458.lzma.bak
2018-10-05T06:24:32.553Z,1538720672.553 [DataOverHttps](INFO): SBD MOMSN=8611492
2018-10-05T06:24:33.530Z,1538720673.530 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T06:24:33.530Z,1538720673.530 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T06:24:33.530Z,1538720673.530 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T06:27:28.676Z,1538720848.676 [RDI_Pathfinder](ERROR): Failed to parse:    +0.00,        +0.00,        +0.00,   0.00,19297.66
2018-10-05T06:27:34.322Z,1538720854.322 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,19301.65
2018-10-05T06:29:33.822Z,1538720973.822 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T06:29:33.822Z,1538720973.822 [Default:CheckIn:C.Wait] Stopped
2018-10-05T06:29:33.823Z,1538720973.823 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T06:29:33.823Z,1538720973.823 [Default:CheckIn:D] Running Loop=1
2018-10-05T06:29:34.254Z,1538720974.254 [Default:CheckIn:D] Stopped
2018-10-05T06:29:34.254Z,1538720974.254 [Default:CheckIn:E] Running Loop=1
2018-10-05T06:29:34.623Z,1538720974.623 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1573.108073 min 
2018-10-05T06:29:34.623Z,1538720974.623 [Default:CheckIn:E] Stopped
2018-10-05T06:29:34.624Z,1538720974.624 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T06:29:34.624Z,1538720974.624 [Default:CheckIn] Stopped
2018-10-05T06:29:34.624Z,1538720974.624 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T06:29:34.624Z,1538720974.624 [Default:CheckIn](INFO): Running loop #153
2018-10-05T06:29:34.624Z,1538720974.624 [Default:CheckIn] Running Loop=153
2018-10-05T06:29:34.624Z,1538720974.624 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T06:29:34.624Z,1538720974.624 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T06:30:29.973Z,1538721029.973 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T06:30:29.973Z,1538721029.973 [NAL9602] Data Fault, FailCount= 3
2018-10-05T06:30:29.973Z,1538721029.973 [NAL9602](ERROR): Data Fault
2018-10-05T06:30:30.041Z,1538721030.041 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T06:30:30.374Z,1538721030.374 [NAL9602](INFO): Powering down
2018-10-05T06:30:31.219Z,1538721031.219 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T06:30:31.219Z,1538721031.219 [NAL9602] No Fault, FailCount= 3
2018-10-05T06:31:00.755Z,1538721060.755 [NAL9602](INFO): Powering up NAL9602
2018-10-05T06:31:11.635Z,1538721071.635 [NAL9602](INFO): NAL9602 initialized
2018-10-05T06:34:36.347Z,1538721276.347 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T06:29:34.6Z
2018-10-05T06:34:36.347Z,1538721276.347 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T06:34:36.348Z,1538721276.348 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T06:34:41.299Z,1538721281.299 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0460.lzma
2018-10-05T06:34:42.073Z,1538721282.073 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0460.lzma.bak
2018-10-05T06:34:42.074Z,1538721282.074 [DataOverHttps](INFO): SBD MOMSN=8611498
2018-10-05T06:34:51.289Z,1538721291.289 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0461.lzma
2018-10-05T06:34:52.065Z,1538721292.065 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0461.lzma.bak
2018-10-05T06:34:52.066Z,1538721292.066 [DataOverHttps](INFO): SBD MOMSN=8611500
2018-10-05T06:34:53.063Z,1538721293.063 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T06:34:53.063Z,1538721293.063 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T06:34:53.063Z,1538721293.063 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T06:39:07.866Z,1538721547.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:39:07.867Z,1538721547.867 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2018-10-05T06:39:07.867Z,1538721547.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:39:07.867Z,1538721547.867 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2018-10-05T06:39:08.234Z,1538721548.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:39:08.234Z,1538721548.234 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:39:08.235Z,1538721548.235 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:39:08.235Z,1538721548.235 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:39:08.235Z,1538721548.235 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:39:08.236Z,1538721548.236 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:39:53.537Z,1538721593.537 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T06:39:53.538Z,1538721593.538 [Default:CheckIn:C.Wait] Stopped
2018-10-05T06:39:53.538Z,1538721593.538 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T06:39:53.538Z,1538721593.538 [Default:CheckIn:D] Running Loop=1
2018-10-05T06:39:53.953Z,1538721593.953 [Default:CheckIn:D] Stopped
2018-10-05T06:39:53.953Z,1538721593.953 [Default:CheckIn:E] Running Loop=1
2018-10-05T06:39:54.370Z,1538721594.370 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1583.436328 min 
2018-10-05T06:39:54.370Z,1538721594.370 [Default:CheckIn:E] Stopped
2018-10-05T06:39:54.370Z,1538721594.370 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T06:39:54.370Z,1538721594.370 [Default:CheckIn] Stopped
2018-10-05T06:39:54.370Z,1538721594.370 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T06:39:54.371Z,1538721594.371 [Default:CheckIn](INFO): Running loop #154
2018-10-05T06:39:54.371Z,1538721594.371 [Default:CheckIn] Running Loop=154
2018-10-05T06:39:54.371Z,1538721594.371 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T06:39:54.371Z,1538721594.371 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T06:41:13.279Z,1538721673.279 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T06:41:13.279Z,1538721673.279 [NAL9602] Data Fault, FailCount= 4
2018-10-05T06:41:13.279Z,1538721673.279 [NAL9602](ERROR): Data Fault
2018-10-05T06:41:13.359Z,1538721673.359 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T06:41:13.683Z,1538721673.683 [NAL9602](INFO): Powering down
2018-10-05T06:41:14.529Z,1538721674.529 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T06:41:14.529Z,1538721674.529 [NAL9602] No Fault, FailCount= 4
2018-10-05T06:41:44.051Z,1538721704.051 [NAL9602](INFO): Powering up NAL9602
2018-10-05T06:41:54.860Z,1538721714.860 [NAL9602](INFO): NAL9602 initialized
2018-10-05T06:42:08.556Z,1538721728.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:42:08.556Z,1538721728.556 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-10-05T06:42:08.556Z,1538721728.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:42:08.558Z,1538721728.558 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:42:08.558Z,1538721728.558 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-05T06:42:08.558Z,1538721728.558 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:42:08.572Z,1538721728.572 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:42:08.572Z,1538721728.572 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:42:08.999Z,1538721728.999 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:42:08.999Z,1538721728.999 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-10-05T06:42:08.000Z,1538721729.000 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:42:08.000Z,1538721729.000 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-05T06:42:09.352Z,1538721729.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:42:09.361Z,1538721729.361 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:42:09.361Z,1538721729.361 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:42:09.362Z,1538721729.362 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:42:09.362Z,1538721729.362 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:42:09.363Z,1538721729.363 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:44:56.498Z,1538721896.498 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T06:39:54.4Z
2018-10-05T06:44:56.498Z,1538721896.498 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T06:44:56.499Z,1538721896.499 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T06:45:01.456Z,1538721901.456 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0463.lzma
2018-10-05T06:45:02.245Z,1538721902.245 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0463.lzma.bak
2018-10-05T06:45:02.245Z,1538721902.245 [DataOverHttps](INFO): SBD MOMSN=8611504
2018-10-05T06:45:11.793Z,1538721911.793 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:45:11.793Z,1538721911.793 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-10-05T06:45:11.793Z,1538721911.793 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:45:11.798Z,1538721911.798 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:45:11.798Z,1538721911.798 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-05T06:45:11.798Z,1538721911.798 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:45:11.837Z,1538721911.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:45:11.837Z,1538721911.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:45:11.874Z,1538721911.874 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0464.lzma
2018-10-05T06:45:11.959Z,1538721911.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:45:11.959Z,1538721911.959 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-10-05T06:45:11.960Z,1538721911.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:45:11.960Z,1538721911.960 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-05T06:45:12.318Z,1538721912.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:45:12.318Z,1538721912.318 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:45:12.318Z,1538721912.318 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:45:12.319Z,1538721912.319 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:45:12.319Z,1538721912.319 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:45:12.320Z,1538721912.320 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:45:12.653Z,1538721912.653 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0464.lzma.bak
2018-10-05T06:45:12.654Z,1538721912.654 [DataOverHttps](INFO): SBD MOMSN=8611506
2018-10-05T06:45:13.609Z,1538721913.609 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T06:45:13.619Z,1538721913.619 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T06:45:13.619Z,1538721913.619 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T06:45:13.619Z,1538721913.619 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T06:48:13.551Z,1538722093.551 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:48:13.552Z,1538722093.552 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-10-05T06:48:13.552Z,1538722093.552 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:48:13.554Z,1538722093.554 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:48:13.554Z,1538722093.554 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-05T06:48:13.554Z,1538722093.554 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:48:13.587Z,1538722093.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:48:13.588Z,1538722093.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:48:13.714Z,1538722093.714 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:48:13.714Z,1538722093.714 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-10-05T06:48:13.714Z,1538722093.714 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:48:13.715Z,1538722093.715 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-05T06:48:14.070Z,1538722094.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:48:14.070Z,1538722094.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:48:14.070Z,1538722094.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:48:14.071Z,1538722094.071 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:48:14.071Z,1538722094.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:48:14.072Z,1538722094.072 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:50:13.945Z,1538722213.945 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T06:50:13.945Z,1538722213.945 [Default:CheckIn:C.Wait] Stopped
2018-10-05T06:50:13.946Z,1538722213.946 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T06:50:13.946Z,1538722213.946 [Default:CheckIn:D] Running Loop=1
2018-10-05T06:50:14.348Z,1538722214.348 [Default:CheckIn:D] Stopped
2018-10-05T06:50:14.348Z,1538722214.348 [Default:CheckIn:E] Running Loop=1
2018-10-05T06:50:14.767Z,1538722214.767 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1593.776302 min 
2018-10-05T06:50:14.767Z,1538722214.767 [Default:CheckIn:E] Stopped
2018-10-05T06:50:14.768Z,1538722214.768 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T06:50:14.768Z,1538722214.768 [Default:CheckIn] Stopped
2018-10-05T06:50:14.768Z,1538722214.768 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T06:50:14.768Z,1538722214.768 [Default:CheckIn](INFO): Running loop #155
2018-10-05T06:50:14.768Z,1538722214.768 [Default:CheckIn] Running Loop=155
2018-10-05T06:50:14.768Z,1538722214.768 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T06:50:14.768Z,1538722214.768 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T06:51:14.103Z,1538722274.103 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:51:14.103Z,1538722274.103 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-10-05T06:51:14.103Z,1538722274.103 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:51:14.105Z,1538722274.105 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:51:14.105Z,1538722274.105 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-05T06:51:14.105Z,1538722274.105 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:51:14.127Z,1538722274.127 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:51:14.127Z,1538722274.127 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:51:14.541Z,1538722274.541 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:51:14.541Z,1538722274.541 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-10-05T06:51:14.542Z,1538722274.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:51:14.542Z,1538722274.542 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-05T06:51:14.914Z,1538722274.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:51:14.914Z,1538722274.914 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:51:14.915Z,1538722274.915 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:51:14.915Z,1538722274.915 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:51:14.915Z,1538722274.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:51:14.916Z,1538722274.916 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:51:57.335Z,1538722317.335 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T06:51:57.335Z,1538722317.335 [NAL9602] Data Fault, FailCount= 5
2018-10-05T06:51:57.335Z,1538722317.335 [NAL9602](ERROR): Data Fault
2018-10-05T06:51:57.420Z,1538722317.420 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T06:51:57.421Z,1538722317.421 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T06:51:57.735Z,1538722317.735 [NAL9602](INFO): Powering down
2018-10-05T06:51:57.819Z,1538722317.819 [CBIT](INFO): Critical error at 20181005T065157
2018-10-05T06:53:57.697Z,1538722437.697 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T06:53:57.698Z,1538722437.698 [NAL9602] No Fault, FailCount= 5
2018-10-05T06:53:57.999Z,1538722437.999 [NAL9602](INFO): Powering up NAL9602
2018-10-05T06:54:08.863Z,1538722448.863 [NAL9602](INFO): NAL9602 initialized
2018-10-05T06:54:14.925Z,1538722454.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:54:14.925Z,1538722454.925 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-10-05T06:54:14.925Z,1538722454.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:54:14.927Z,1538722454.927 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:54:14.927Z,1538722454.927 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-05T06:54:14.927Z,1538722454.927 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:54:14.957Z,1538722454.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:54:14.957Z,1538722454.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:54:15.342Z,1538722455.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:54:15.342Z,1538722455.342 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-10-05T06:54:15.343Z,1538722455.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:54:15.343Z,1538722455.343 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-05T06:54:15.729Z,1538722455.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:54:15.730Z,1538722455.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:54:15.730Z,1538722455.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:54:15.731Z,1538722455.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:54:15.731Z,1538722455.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:54:15.731Z,1538722455.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:55:17.011Z,1538722517.011 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T06:50:14.8Z
2018-10-05T06:55:17.011Z,1538722517.011 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T06:55:17.011Z,1538722517.011 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T06:55:22.007Z,1538722522.007 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0466.lzma
2018-10-05T06:55:22.786Z,1538722522.786 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0466.lzma.bak
2018-10-05T06:55:22.786Z,1538722522.786 [DataOverHttps](INFO): SBD MOMSN=8611510
2018-10-05T06:55:31.964Z,1538722531.964 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20181004T041305/Express0467.lzma
2018-10-05T06:55:32.730Z,1538722532.730 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0467.lzma.bak
2018-10-05T06:55:32.730Z,1538722532.730 [DataOverHttps](INFO): SBD MOMSN=8611513
2018-10-05T06:55:33.705Z,1538722533.705 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T06:55:33.705Z,1538722533.705 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T06:55:33.705Z,1538722533.705 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T06:57:16.039Z,1538722636.039 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:57:16.039Z,1538722636.039 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-10-05T06:57:16.039Z,1538722636.039 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T06:57:16.041Z,1538722636.041 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T06:57:16.041Z,1538722636.041 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-05T06:57:16.041Z,1538722636.041 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T06:57:16.054Z,1538722636.054 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T06:57:16.054Z,1538722636.054 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T06:57:16.450Z,1538722636.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T06:57:16.450Z,1538722636.450 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-10-05T06:57:16.451Z,1538722636.451 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T06:57:16.451Z,1538722636.451 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-05T06:57:16.850Z,1538722636.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T06:57:16.850Z,1538722636.850 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:57:16.851Z,1538722636.851 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T06:57:16.851Z,1538722636.851 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T06:57:16.851Z,1538722636.851 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T06:57:16.852Z,1538722636.852 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:00:09.663Z,1538722809.663 [RDI_Pathfinder](ERROR): Unknown system health message
2018-10-05T07:00:09.663Z,1538722809.663 [RDI_Pathfinder] Hardware Fault, FailCount= 1
2018-10-05T07:00:09.663Z,1538722809.663 [RDI_Pathfinder](ERROR): Hardware Fault
2018-10-05T07:00:09.687Z,1538722809.687 [CBIT](ERROR): Hardware Fault in component: RDI_Pathfinder
2018-10-05T07:00:10.101Z,1538722810.101 [RDI_Pathfinder](INFO): Powering down
2018-10-05T07:00:10.872Z,1538722810.872 [CBIT](INFO): Clearing failed state for component RDI_Pathfinder
2018-10-05T07:00:10.872Z,1538722810.872 [RDI_Pathfinder] No Fault, FailCount= 0
2018-10-05T07:00:19.553Z,1538722819.553 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:00:19.554Z,1538722819.554 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-10-05T07:00:19.554Z,1538722819.554 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:00:19.555Z,1538722819.555 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:00:19.556Z,1538722819.556 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-05T07:00:19.556Z,1538722819.556 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:00:19.569Z,1538722819.569 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:00:19.569Z,1538722819.569 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:00:19.692Z,1538722819.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:00:19.692Z,1538722819.692 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-10-05T07:00:19.697Z,1538722819.697 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:00:19.697Z,1538722819.697 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-05T07:00:20.046Z,1538722820.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:00:20.046Z,1538722820.046 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:00:20.047Z,1538722820.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:00:20.047Z,1538722820.047 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:00:20.048Z,1538722820.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:00:20.048Z,1538722820.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:00:24.429Z,1538722824.429 [RDI_Pathfinder](ERROR): Failed to parse:Pathfinder
2018-10-05T07:00:34.029Z,1538722834.029 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T07:00:34.029Z,1538722834.029 [Default:CheckIn:C.Wait] Stopped
2018-10-05T07:00:34.029Z,1538722834.029 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T07:00:34.029Z,1538722834.029 [Default:CheckIn:D] Running Loop=1
2018-10-05T07:00:34.448Z,1538722834.448 [Default:CheckIn:D] Stopped
2018-10-05T07:00:34.449Z,1538722834.449 [Default:CheckIn:E] Running Loop=1
2018-10-05T07:00:34.840Z,1538722834.840 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1604.111328 min 
2018-10-05T07:00:34.840Z,1538722834.840 [Default:CheckIn:E] Stopped
2018-10-05T07:00:34.840Z,1538722834.840 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T07:00:34.840Z,1538722834.840 [Default:CheckIn] Stopped
2018-10-05T07:00:34.840Z,1538722834.840 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T07:00:34.840Z,1538722834.840 [Default:CheckIn](INFO): Running loop #156
2018-10-05T07:00:34.840Z,1538722834.840 [Default:CheckIn] Running Loop=156
2018-10-05T07:00:34.841Z,1538722834.841 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T07:00:34.841Z,1538722834.841 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T07:03:20.104Z,1538723000.104 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:03:20.104Z,1538723000.104 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-10-05T07:03:20.104Z,1538723000.104 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:03:20.114Z,1538723000.114 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:03:20.114Z,1538723000.114 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-05T07:03:20.114Z,1538723000.114 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:03:20.140Z,1538723000.140 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:03:20.149Z,1538723000.149 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:03:20.520Z,1538723000.520 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:03:20.521Z,1538723000.521 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-10-05T07:03:20.525Z,1538723000.525 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:03:20.525Z,1538723000.525 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-05T07:03:20.877Z,1538723000.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:03:20.878Z,1538723000.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:03:20.878Z,1538723000.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:03:20.879Z,1538723000.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:03:20.879Z,1538723000.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:03:20.879Z,1538723000.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:03:52.599Z,1538723032.599 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T07:04:09.755Z,1538723049.755 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T07:04:09.755Z,1538723049.755 [NAL9602] Data Fault, FailCount= 1
2018-10-05T07:04:09.755Z,1538723049.755 [NAL9602](ERROR): Data Fault
2018-10-05T07:04:09.842Z,1538723049.842 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T07:04:10.159Z,1538723050.159 [NAL9602](INFO): Powering down
2018-10-05T07:04:11.027Z,1538723051.027 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T07:04:11.027Z,1538723051.027 [NAL9602] No Fault, FailCount= 1
2018-10-05T07:04:40.255Z,1538723080.255 [NAL9602](INFO): Powering up NAL9602
2018-10-05T07:04:51.455Z,1538723091.455 [NAL9602](INFO): NAL9602 initialized
2018-10-05T07:05:37.188Z,1538723137.188 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T07:00:34.8Z
2018-10-05T07:05:37.188Z,1538723137.188 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T07:05:37.188Z,1538723137.188 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T07:05:42.106Z,1538723142.106 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0469.lzma
2018-10-05T07:05:42.892Z,1538723142.892 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0469.lzma.bak
2018-10-05T07:05:42.892Z,1538723142.892 [DataOverHttps](INFO): SBD MOMSN=8611517
2018-10-05T07:05:52.103Z,1538723152.103 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0470.lzma
2018-10-05T07:05:52.888Z,1538723152.888 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0470.lzma.bak
2018-10-05T07:05:52.888Z,1538723152.888 [DataOverHttps](INFO): SBD MOMSN=8611519
2018-10-05T07:05:53.899Z,1538723153.899 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T07:05:53.899Z,1538723153.899 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T07:05:53.899Z,1538723153.899 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T07:06:02.865Z,1538723162.865 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.847,*-0.008,*0.000
2018-10-05T07:06:20.896Z,1538723180.896 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:06:20.896Z,1538723180.896 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-10-05T07:06:20.896Z,1538723180.896 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:06:20.898Z,1538723180.898 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:06:20.898Z,1538723180.898 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-05T07:06:20.899Z,1538723180.899 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:06:20.912Z,1538723180.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:06:20.912Z,1538723180.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:06:21.333Z,1538723181.333 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:06:21.333Z,1538723181.333 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-10-05T07:06:21.334Z,1538723181.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:06:21.334Z,1538723181.334 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-05T07:06:21.692Z,1538723181.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:06:21.697Z,1538723181.697 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:06:21.697Z,1538723181.697 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:06:21.698Z,1538723181.698 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:06:21.698Z,1538723181.698 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:06:21.698Z,1538723181.698 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:09:21.767Z,1538723361.767 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:09:21.767Z,1538723361.767 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-10-05T07:09:21.767Z,1538723361.767 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:09:21.769Z,1538723361.769 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:09:21.769Z,1538723361.769 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-05T07:09:21.769Z,1538723361.769 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:09:21.793Z,1538723361.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:09:21.793Z,1538723361.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:09:22.186Z,1538723362.186 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:09:22.186Z,1538723362.186 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-10-05T07:09:22.187Z,1538723362.187 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:09:22.187Z,1538723362.187 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-05T07:09:22.574Z,1538723362.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:09:22.574Z,1538723362.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:09:22.575Z,1538723362.575 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:09:22.575Z,1538723362.575 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:09:22.575Z,1538723362.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:09:22.576Z,1538723362.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:10:54.119Z,1538723454.119 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T07:10:54.120Z,1538723454.120 [Default:CheckIn:C.Wait] Stopped
2018-10-05T07:10:54.120Z,1538723454.120 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T07:10:54.120Z,1538723454.120 [Default:CheckIn:D] Running Loop=1
2018-10-05T07:10:54.521Z,1538723454.521 [Default:CheckIn:D] Stopped
2018-10-05T07:10:54.521Z,1538723454.521 [Default:CheckIn:E] Running Loop=1
2018-10-05T07:10:54.885Z,1538723454.885 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1614.445833 min 
2018-10-05T07:10:54.885Z,1538723454.885 [Default:CheckIn:E] Stopped
2018-10-05T07:10:54.886Z,1538723454.886 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T07:10:54.886Z,1538723454.886 [Default:CheckIn] Stopped
2018-10-05T07:10:54.886Z,1538723454.886 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T07:10:54.886Z,1538723454.886 [Default:CheckIn](INFO): Running loop #157
2018-10-05T07:10:54.886Z,1538723454.886 [Default:CheckIn] Running Loop=157
2018-10-05T07:10:54.886Z,1538723454.886 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T07:10:54.886Z,1538723454.886 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T07:12:25.495Z,1538723545.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:12:25.495Z,1538723545.495 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-10-05T07:12:25.495Z,1538723545.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:12:25.497Z,1538723545.497 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:12:25.498Z,1538723545.498 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-05T07:12:25.498Z,1538723545.498 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:12:25.523Z,1538723545.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:12:25.524Z,1538723545.524 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:12:25.671Z,1538723545.671 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:12:25.671Z,1538723545.671 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-10-05T07:12:25.672Z,1538723545.672 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:12:25.672Z,1538723545.672 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-05T07:12:26.006Z,1538723546.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:12:26.006Z,1538723546.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:12:26.007Z,1538723546.007 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:12:26.007Z,1538723546.007 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:12:26.008Z,1538723546.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:12:26.008Z,1538723546.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:14:53.491Z,1538723693.491 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T07:14:53.491Z,1538723693.491 [NAL9602] Data Fault, FailCount= 2
2018-10-05T07:14:53.491Z,1538723693.491 [NAL9602](ERROR): Data Fault
2018-10-05T07:14:53.575Z,1538723693.575 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T07:14:53.875Z,1538723693.875 [NAL9602](INFO): Powering down
2018-10-05T07:14:54.736Z,1538723694.736 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T07:14:54.736Z,1538723694.736 [NAL9602] No Fault, FailCount= 2
2018-10-05T07:15:24.052Z,1538723724.052 [NAL9602](INFO): Powering up NAL9602
2018-10-05T07:15:26.096Z,1538723726.096 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:15:26.096Z,1538723726.096 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-10-05T07:15:26.096Z,1538723726.096 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:15:26.100Z,1538723726.100 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:15:26.100Z,1538723726.100 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-05T07:15:26.100Z,1538723726.100 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:15:26.136Z,1538723726.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:15:26.136Z,1538723726.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:15:26.538Z,1538723726.538 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:15:26.538Z,1538723726.538 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-10-05T07:15:26.538Z,1538723726.538 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:15:26.538Z,1538723726.538 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-05T07:15:26.882Z,1538723726.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:15:26.882Z,1538723726.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:15:26.883Z,1538723726.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:15:26.883Z,1538723726.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:15:26.884Z,1538723726.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:15:26.884Z,1538723726.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:15:35.247Z,1538723735.247 [NAL9602](INFO): NAL9602 initialized
2018-10-05T07:15:56.900Z,1538723756.900 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T07:10:54.9Z
2018-10-05T07:15:56.900Z,1538723756.900 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T07:15:56.900Z,1538723756.900 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T07:16:02.036Z,1538723762.036 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0472.lzma
2018-10-05T07:16:02.822Z,1538723762.822 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0472.lzma.bak
2018-10-05T07:16:02.822Z,1538723762.822 [DataOverHttps](INFO): SBD MOMSN=8611523
2018-10-05T07:16:08.405Z,1538723768.405 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-05T07:16:12.086Z,1538723772.086 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0473.lzma
2018-10-05T07:16:12.853Z,1538723772.853 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0473.lzma.bak
2018-10-05T07:16:12.853Z,1538723772.853 [DataOverHttps](INFO): SBD MOMSN=8611525
2018-10-05T07:16:13.826Z,1538723773.826 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T07:16:13.826Z,1538723773.826 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T07:16:13.826Z,1538723773.826 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T07:16:18.120Z,1538723778.120 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T07:18:27.244Z,1538723907.244 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:18:27.244Z,1538723907.244 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-10-05T07:18:27.244Z,1538723907.244 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:18:27.247Z,1538723907.247 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:18:27.247Z,1538723907.247 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-05T07:18:27.247Z,1538723907.247 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:18:27.277Z,1538723907.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:18:27.277Z,1538723907.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:18:27.650Z,1538723907.650 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:18:27.651Z,1538723907.651 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-10-05T07:18:27.651Z,1538723907.651 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:18:27.651Z,1538723907.651 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-05T07:18:28.042Z,1538723908.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:18:28.042Z,1538723908.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:18:28.043Z,1538723908.043 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:18:28.043Z,1538723908.043 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:18:28.043Z,1538723908.043 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:18:28.044Z,1538723908.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:18:51.360Z,1538723931.360 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T07:21:14.136Z,1538724074.136 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T07:21:14.141Z,1538724074.141 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +     +0.00,        +0.00,   0.00,1249.93
2018-10-05T07:21:14.169Z,1538724074.169 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T07:21:14.169Z,1538724074.169 [Default:CheckIn:C.Wait] Stopped
2018-10-05T07:21:14.169Z,1538724074.169 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T07:21:14.169Z,1538724074.169 [Default:CheckIn:D] Running Loop=1
2018-10-05T07:21:14.523Z,1538724074.523 [Default:CheckIn:D] Stopped
2018-10-05T07:21:14.523Z,1538724074.523 [Default:CheckIn:E] Running Loop=1
2018-10-05T07:21:14.937Z,1538724074.937 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1624.779297 min 
2018-10-05T07:21:14.937Z,1538724074.937 [Default:CheckIn:E] Stopped
2018-10-05T07:21:14.937Z,1538724074.937 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T07:21:14.937Z,1538724074.937 [Default:CheckIn] Stopped
2018-10-05T07:21:14.937Z,1538724074.937 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T07:21:14.938Z,1538724074.938 [Default:CheckIn](INFO): Running loop #158
2018-10-05T07:21:14.938Z,1538724074.938 [Default:CheckIn] Running Loop=158
2018-10-05T07:21:14.938Z,1538724074.938 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T07:21:14.938Z,1538724074.938 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T07:21:28.203Z,1538724088.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:21:28.203Z,1538724088.203 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-10-05T07:21:28.203Z,1538724088.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:21:28.205Z,1538724088.205 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:21:28.205Z,1538724088.205 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-05T07:21:28.205Z,1538724088.205 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:21:28.241Z,1538724088.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:21:28.241Z,1538724088.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:21:28.544Z,1538724088.544 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:21:28.544Z,1538724088.544 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-10-05T07:21:28.544Z,1538724088.544 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:21:28.545Z,1538724088.545 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-05T07:21:28.930Z,1538724088.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:21:28.930Z,1538724088.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:21:28.931Z,1538724088.931 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:21:28.931Z,1538724088.931 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:21:28.931Z,1538724088.931 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:21:28.932Z,1538724088.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:23:45.358Z,1538724225.358 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-05T07:24:31.496Z,1538724271.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:24:31.496Z,1538724271.496 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-10-05T07:24:31.496Z,1538724271.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:24:31.498Z,1538724271.498 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:24:31.498Z,1538724271.498 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-05T07:24:31.498Z,1538724271.498 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:24:31.544Z,1538724271.544 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:24:31.544Z,1538724271.544 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:24:31.659Z,1538724271.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:24:31.659Z,1538724271.659 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-10-05T07:24:31.659Z,1538724271.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:24:31.660Z,1538724271.660 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-05T07:24:32.014Z,1538724272.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:24:32.014Z,1538724272.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:24:32.015Z,1538724272.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:24:32.015Z,1538724272.015 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:24:32.016Z,1538724272.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:24:32.016Z,1538724272.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:25:37.247Z,1538724337.247 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T07:25:37.247Z,1538724337.247 [NAL9602] Data Fault, FailCount= 3
2018-10-05T07:25:37.247Z,1538724337.247 [NAL9602](ERROR): Data Fault
2018-10-05T07:25:37.355Z,1538724337.355 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T07:25:37.651Z,1538724337.651 [NAL9602](INFO): Powering down
2018-10-05T07:25:38.557Z,1538724338.557 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T07:25:38.557Z,1538724338.557 [NAL9602] No Fault, FailCount= 3
2018-10-05T07:26:07.699Z,1538724367.699 [NAL9602](INFO): Powering up NAL9602
2018-10-05T07:26:17.346Z,1538724377.346 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T07:21:14.9Z
2018-10-05T07:26:17.346Z,1538724377.346 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T07:26:17.346Z,1538724377.346 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T07:26:18.575Z,1538724378.575 [NAL9602](INFO): NAL9602 initialized
2018-10-05T07:26:22.274Z,1538724382.274 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0475.lzma
2018-10-05T07:26:23.060Z,1538724383.060 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0475.lzma.bak
2018-10-05T07:26:23.060Z,1538724383.060 [DataOverHttps](INFO): SBD MOMSN=8611529
2018-10-05T07:26:32.648Z,1538724392.648 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0476.lzma
2018-10-05T07:26:33.405Z,1538724393.405 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0476.lzma.bak
2018-10-05T07:26:33.405Z,1538724393.405 [DataOverHttps](INFO): SBD MOMSN=8611531
2018-10-05T07:26:34.376Z,1538724394.376 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T07:26:34.376Z,1538724394.376 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T07:26:34.376Z,1538724394.376 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T07:27:32.243Z,1538724452.243 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:27:32.243Z,1538724452.243 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-10-05T07:27:32.243Z,1538724452.243 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:27:32.271Z,1538724452.271 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:27:32.272Z,1538724452.272 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-05T07:27:32.272Z,1538724452.272 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:27:32.308Z,1538724452.308 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:27:32.308Z,1538724452.308 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:27:32.678Z,1538724452.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:27:32.679Z,1538724452.679 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-10-05T07:27:32.679Z,1538724452.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:27:32.679Z,1538724452.679 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-05T07:27:33.060Z,1538724453.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:27:33.060Z,1538724453.060 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:27:33.060Z,1538724453.060 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:27:33.061Z,1538724453.061 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:27:33.062Z,1538724453.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:27:33.062Z,1538724453.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:28:32.487Z,1538724512.487 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T07:28:32.487Z,1538724512.487 [RDI_Pathfinder](ERROR): Failed to parse:
:HMc,0ffd,*15.873,*-0.007,*0.000
2018-10-05T07:30:33.384Z,1538724633.384 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:30:33.385Z,1538724633.385 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-10-05T07:30:33.385Z,1538724633.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:30:33.387Z,1538724633.387 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:30:33.387Z,1538724633.387 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-05T07:30:33.387Z,1538724633.387 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:30:33.403Z,1538724633.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:30:33.403Z,1538724633.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:30:33.800Z,1538724633.800 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:30:33.800Z,1538724633.800 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-10-05T07:30:33.800Z,1538724633.800 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:30:33.800Z,1538724633.800 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-05T07:30:34.188Z,1538724634.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:30:34.188Z,1538724634.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:30:34.188Z,1538724634.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:30:34.189Z,1538724634.189 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:30:34.190Z,1538724634.190 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:30:34.190Z,1538724634.190 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:31:34.754Z,1538724694.754 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T07:31:34.754Z,1538724694.754 [Default:CheckIn:C.Wait] Stopped
2018-10-05T07:31:34.754Z,1538724694.754 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T07:31:34.754Z,1538724694.754 [Default:CheckIn:D] Running Loop=1
2018-10-05T07:31:35.205Z,1538724695.205 [Default:CheckIn:D] Stopped
2018-10-05T07:31:35.205Z,1538724695.205 [Default:CheckIn:E] Running Loop=1
2018-10-05T07:31:35.568Z,1538724695.568 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1635.123698 min 
2018-10-05T07:31:35.568Z,1538724695.568 [Default:CheckIn:E] Stopped
2018-10-05T07:31:35.568Z,1538724695.568 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T07:31:35.568Z,1538724695.568 [Default:CheckIn] Stopped
2018-10-05T07:31:35.577Z,1538724695.577 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T07:31:35.577Z,1538724695.577 [Default:CheckIn](INFO): Running loop #159
2018-10-05T07:31:35.577Z,1538724695.577 [Default:CheckIn] Running Loop=159
2018-10-05T07:31:35.577Z,1538724695.577 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T07:31:35.578Z,1538724695.578 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T07:33:34.295Z,1538724814.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:33:34.295Z,1538724814.295 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-10-05T07:33:34.295Z,1538724814.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:33:34.298Z,1538724814.298 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:33:34.298Z,1538724814.298 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-05T07:33:34.298Z,1538724814.298 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:33:34.327Z,1538724814.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:33:34.327Z,1538724814.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:33:34.710Z,1538724814.710 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:33:34.711Z,1538724814.711 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-10-05T07:33:34.711Z,1538724814.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:33:34.711Z,1538724814.711 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-05T07:33:35.100Z,1538724815.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:33:35.105Z,1538724815.105 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:33:35.105Z,1538724815.105 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:33:35.106Z,1538724815.106 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:33:35.106Z,1538724815.106 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:33:35.106Z,1538724815.106 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:33:35.490Z,1538724815.490 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T07:33:35.490Z,1538724815.490 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-2768,V
2018-10-05T07:36:22.347Z,1538724982.347 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T07:36:22.347Z,1538724982.347 [NAL9602] Data Fault, FailCount= 4
2018-10-05T07:36:22.347Z,1538724982.347 [NAL9602](ERROR): Data Fault
2018-10-05T07:36:22.434Z,1538724982.434 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T07:36:22.747Z,1538724982.747 [NAL9602](INFO): Powering down
2018-10-05T07:36:23.622Z,1538724983.622 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T07:36:23.622Z,1538724983.622 [NAL9602] No Fault, FailCount= 4
2018-10-05T07:36:37.953Z,1538724997.953 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:36:37.953Z,1538724997.953 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-10-05T07:36:37.953Z,1538724997.953 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:36:37.955Z,1538724997.955 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:36:37.955Z,1538724997.955 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-05T07:36:37.955Z,1538724997.955 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:36:37.974Z,1538724997.974 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T07:31:35.6Z
2018-10-05T07:36:37.974Z,1538724997.974 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T07:36:37.974Z,1538724997.974 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T07:36:37.999Z,1538724997.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:36:37.999Z,1538724997.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:36:38.118Z,1538724998.118 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:36:38.118Z,1538724998.118 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-10-05T07:36:38.118Z,1538724998.118 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:36:38.118Z,1538724998.118 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-05T07:36:38.675Z,1538724998.675 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0478.lzma
2018-10-05T07:36:38.727Z,1538724998.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:36:38.728Z,1538724998.728 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:36:38.728Z,1538724998.728 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:36:38.728Z,1538724998.728 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:36:38.730Z,1538724998.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:36:38.730Z,1538724998.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:36:39.221Z,1538724999.221 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0478.lzma.bak
2018-10-05T07:36:39.222Z,1538724999.222 [DataOverHttps](INFO): SBD MOMSN=8611535
2018-10-05T07:36:54.380Z,1538725014.380 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0479.lzma
2018-10-05T07:36:54.387Z,1538725014.387 [NAL9602](INFO): Powering up NAL9602
2018-10-05T07:36:54.986Z,1538725014.986 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0479.lzma.bak
2018-10-05T07:36:54.986Z,1538725014.986 [DataOverHttps](INFO): SBD MOMSN=8611537
2018-10-05T07:36:55.926Z,1538725015.926 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T07:36:55.926Z,1538725015.926 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T07:36:55.926Z,1538725015.926 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T07:37:05.275Z,1538725025.275 [NAL9602](INFO): NAL9602 initialized
2018-10-05T07:37:45.323Z,1538725065.323 [RDI_Pathfinder](ERROR): Failed to parse:
:H8c,0ffe, 15.894, -0.000, 0.000
2018-10-05T07:38:11.452Z,1538725091.452 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T07:39:38.879Z,1538725178.879 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:39:38.879Z,1538725178.879 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-10-05T07:39:38.879Z,1538725178.879 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:39:38.885Z,1538725178.885 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:39:38.885Z,1538725178.885 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-05T07:39:38.885Z,1538725178.885 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:39:38.907Z,1538725178.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:39:38.907Z,1538725178.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:39:39.312Z,1538725179.312 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:39:39.312Z,1538725179.312 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-10-05T07:39:39.317Z,1538725179.317 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:39:39.317Z,1538725179.317 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-05T07:39:39.665Z,1538725179.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:39:39.666Z,1538725179.666 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:39:39.666Z,1538725179.666 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:39:39.667Z,1538725179.667 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:39:39.667Z,1538725179.667 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:39:39.667Z,1538725179.667 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:41:56.167Z,1538725316.167 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T07:41:56.167Z,1538725316.167 [Default:CheckIn:C.Wait] Stopped
2018-10-05T07:41:56.167Z,1538725316.167 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T07:41:56.167Z,1538725316.167 [Default:CheckIn:D] Running Loop=1
2018-10-05T07:41:56.521Z,1538725316.521 [Default:CheckIn:D] Stopped
2018-10-05T07:41:56.521Z,1538725316.521 [Default:CheckIn:E] Running Loop=1
2018-10-05T07:41:56.929Z,1538725316.929 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1645.479167 min 
2018-10-05T07:41:56.929Z,1538725316.929 [Default:CheckIn:E] Stopped
2018-10-05T07:41:56.929Z,1538725316.929 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T07:41:56.930Z,1538725316.930 [Default:CheckIn] Stopped
2018-10-05T07:41:56.930Z,1538725316.930 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T07:41:56.930Z,1538725316.930 [Default:CheckIn](INFO): Running loop #160
2018-10-05T07:41:56.930Z,1538725316.930 [Default:CheckIn] Running Loop=160
2018-10-05T07:41:56.930Z,1538725316.930 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T07:41:56.930Z,1538725316.930 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T07:42:39.811Z,1538725359.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:42:39.811Z,1538725359.811 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-10-05T07:42:39.811Z,1538725359.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:42:39.817Z,1538725359.817 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:42:39.817Z,1538725359.817 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-10-05T07:42:39.817Z,1538725359.817 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:42:39.843Z,1538725359.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:42:39.843Z,1538725359.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:42:40.230Z,1538725360.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:42:40.230Z,1538725360.230 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-10-05T07:42:40.231Z,1538725360.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:42:40.231Z,1538725360.231 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-10-05T07:42:40.590Z,1538725360.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:42:40.590Z,1538725360.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:42:40.591Z,1538725360.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:42:40.591Z,1538725360.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:42:40.591Z,1538725360.591 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:42:40.592Z,1538725360.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:45:40.627Z,1538725540.627 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:45:40.627Z,1538725540.627 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-10-05T07:45:40.627Z,1538725540.627 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:45:40.629Z,1538725540.629 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:45:40.629Z,1538725540.629 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-10-05T07:45:40.629Z,1538725540.629 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:45:40.656Z,1538725540.656 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:45:40.656Z,1538725540.656 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:45:41.042Z,1538725541.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:45:41.042Z,1538725541.042 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-10-05T07:45:41.043Z,1538725541.043 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:45:41.043Z,1538725541.043 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-10-05T07:45:41.448Z,1538725541.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:45:41.449Z,1538725541.449 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:45:41.449Z,1538725541.449 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:45:41.450Z,1538725541.450 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:45:41.450Z,1538725541.450 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:45:41.451Z,1538725541.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:46:59.395Z,1538725619.395 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T07:41:56.9Z
2018-10-05T07:46:59.395Z,1538725619.395 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T07:46:59.396Z,1538725619.396 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T07:47:00.098Z,1538725620.098 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0481.lzma
2018-10-05T07:47:00.642Z,1538725620.642 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0481.lzma.bak
2018-10-05T07:47:00.642Z,1538725620.642 [DataOverHttps](INFO): SBD MOMSN=8611541
2018-10-05T07:47:09.848Z,1538725629.848 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20181004T041305/Express0482.lzma
2018-10-05T07:47:09.879Z,1538725629.879 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T07:47:09.879Z,1538725629.879 [NAL9602] Data Fault, FailCount= 5
2018-10-05T07:47:09.879Z,1538725629.879 [NAL9602](ERROR): Data Fault
2018-10-05T07:47:09.939Z,1538725629.939 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T07:47:09.940Z,1538725629.940 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T07:47:10.223Z,1538725630.223 [NAL9602](INFO): Powering down
2018-10-05T07:47:10.302Z,1538725630.302 [CBIT](INFO): Critical error at 20181005T074709
2018-10-05T07:47:10.613Z,1538725630.613 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0482.lzma.bak
2018-10-05T07:47:10.614Z,1538725630.614 [DataOverHttps](INFO): SBD MOMSN=8611543
2018-10-05T07:47:11.571Z,1538725631.571 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T07:47:11.572Z,1538725631.572 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T07:47:11.572Z,1538725631.572 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T07:48:41.655Z,1538725721.655 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:48:41.655Z,1538725721.655 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-10-05T07:48:41.655Z,1538725721.655 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:48:41.657Z,1538725721.657 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:48:41.657Z,1538725721.657 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-10-05T07:48:41.657Z,1538725721.657 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:48:41.684Z,1538725721.684 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:48:41.685Z,1538725721.685 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:48:42.070Z,1538725722.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:48:42.071Z,1538725722.071 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-10-05T07:48:42.071Z,1538725722.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:48:42.071Z,1538725722.071 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-10-05T07:48:42.483Z,1538725722.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:48:42.483Z,1538725722.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:48:42.484Z,1538725722.484 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:48:42.484Z,1538725722.484 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:48:42.485Z,1538725722.485 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:48:42.489Z,1538725722.489 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:49:10.203Z,1538725750.203 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T07:49:10.203Z,1538725750.203 [NAL9602] No Fault, FailCount= 5
2018-10-05T07:49:10.527Z,1538725750.527 [NAL9602](INFO): Powering up NAL9602
2018-10-05T07:49:21.731Z,1538725761.731 [NAL9602](INFO): NAL9602 initialized
2018-10-05T07:51:42.843Z,1538725902.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:51:42.843Z,1538725902.843 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-10-05T07:51:42.843Z,1538725902.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:51:42.845Z,1538725902.845 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:51:42.845Z,1538725902.845 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-10-05T07:51:42.845Z,1538725902.845 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:51:42.891Z,1538725902.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:51:42.891Z,1538725902.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:51:43.252Z,1538725903.252 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:51:43.253Z,1538725903.253 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-10-05T07:51:43.253Z,1538725903.253 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:51:43.253Z,1538725903.253 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-10-05T07:51:43.638Z,1538725903.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:51:43.638Z,1538725903.638 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:51:43.639Z,1538725903.639 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:51:43.639Z,1538725903.639 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:51:43.640Z,1538725903.640 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:51:43.640Z,1538725903.640 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:52:11.731Z,1538725931.731 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T07:52:11.732Z,1538725931.732 [Default:CheckIn:C.Wait] Stopped
2018-10-05T07:52:11.732Z,1538725931.732 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T07:52:11.732Z,1538725931.732 [Default:CheckIn:D] Running Loop=1
2018-10-05T07:52:12.131Z,1538725932.131 [Default:CheckIn:D] Stopped
2018-10-05T07:52:12.131Z,1538725932.131 [Default:CheckIn:E] Running Loop=1
2018-10-05T07:52:12.549Z,1538725932.549 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1655.739323 min 
2018-10-05T07:52:12.549Z,1538725932.549 [Default:CheckIn:E] Stopped
2018-10-05T07:52:12.549Z,1538725932.549 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T07:52:12.549Z,1538725932.549 [Default:CheckIn] Stopped
2018-10-05T07:52:12.549Z,1538725932.549 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T07:52:12.550Z,1538725932.550 [Default:CheckIn](INFO): Running loop #161
2018-10-05T07:52:12.550Z,1538725932.550 [Default:CheckIn] Running Loop=161
2018-10-05T07:52:12.550Z,1538725932.550 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T07:52:12.550Z,1538725932.550 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T07:54:36.071Z,1538726076.071 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T07:54:36.071Z,1538726076.071 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,     ,        +0.00,   0.00,3251.54
2018-10-05T07:54:43.681Z,1538726083.681 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:54:43.681Z,1538726083.681 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-10-05T07:54:43.681Z,1538726083.681 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:54:43.683Z,1538726083.683 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:54:43.683Z,1538726083.683 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-10-05T07:54:43.683Z,1538726083.683 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:54:43.709Z,1538726083.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:54:43.709Z,1538726083.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:54:44.105Z,1538726084.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:54:44.105Z,1538726084.105 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-10-05T07:54:44.106Z,1538726084.106 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:54:44.106Z,1538726084.106 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-10-05T07:54:44.486Z,1538726084.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:54:44.487Z,1538726084.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:54:44.487Z,1538726084.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:54:44.487Z,1538726084.487 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:54:44.488Z,1538726084.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:54:44.488Z,1538726084.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:55:49.480Z,1538726149.480 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T07:55:49.480Z,1538726149.480 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100501004683,35.0, 0.0,1448.9,  0
2018-10-05T07:57:14.744Z,1538726234.744 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T07:52:12.5Z
2018-10-05T07:57:14.744Z,1538726234.744 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T07:57:14.744Z,1538726234.744 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T07:57:19.678Z,1538726239.678 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0484.lzma
2018-10-05T07:57:20.472Z,1538726240.472 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0484.lzma.bak
2018-10-05T07:57:20.473Z,1538726240.473 [DataOverHttps](INFO): SBD MOMSN=8611546
2018-10-05T07:57:20.552Z,1538726240.552 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T07:57:20.552Z,1538726240.552 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,32768,-32768,-32768,V
2018-10-05T07:57:29.758Z,1538726249.758 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0485.lzma
2018-10-05T07:57:30.526Z,1538726250.526 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0485.lzma.bak
2018-10-05T07:57:30.527Z,1538726250.527 [DataOverHttps](INFO): SBD MOMSN=8611549
2018-10-05T07:57:31.498Z,1538726251.498 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T07:57:31.498Z,1538726251.498 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T07:57:31.498Z,1538726251.498 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T07:57:44.851Z,1538726264.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:57:44.851Z,1538726264.851 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-10-05T07:57:44.851Z,1538726264.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T07:57:44.857Z,1538726264.857 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T07:57:44.857Z,1538726264.857 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-10-05T07:57:44.857Z,1538726264.857 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T07:57:44.883Z,1538726264.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T07:57:44.883Z,1538726264.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T07:57:45.296Z,1538726265.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T07:57:45.297Z,1538726265.297 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-10-05T07:57:45.297Z,1538726265.297 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T07:57:45.297Z,1538726265.297 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-10-05T07:57:45.658Z,1538726265.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T07:57:45.658Z,1538726265.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:57:45.659Z,1538726265.659 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:57:45.659Z,1538726265.659 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T07:57:45.659Z,1538726265.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T07:57:45.660Z,1538726265.660 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T07:59:23.391Z,1538726363.391 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T07:59:23.391Z,1538726363.391 [NAL9602] Data Fault, FailCount= 1
2018-10-05T07:59:23.391Z,1538726363.391 [NAL9602](ERROR): Data Fault
2018-10-05T07:59:23.489Z,1538726363.489 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T07:59:23.787Z,1538726363.787 [NAL9602](INFO): Powering down
2018-10-05T07:59:24.644Z,1538726364.644 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T07:59:24.644Z,1538726364.644 [NAL9602] No Fault, FailCount= 1
2018-10-05T07:59:56.183Z,1538726396.183 [NAL9602](INFO): Powering up NAL9602
2018-10-05T08:00:07.083Z,1538726407.083 [NAL9602](INFO): NAL9602 initialized
2018-10-05T08:00:34.436Z,1538726434.436 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T08:00:34.437Z,1538726434.437 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-

2018-10-05T08:00:45.667Z,1538726445.667 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:00:45.667Z,1538726445.667 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-10-05T08:00:45.667Z,1538726445.667 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:00:45.722Z,1538726445.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:00:46.065Z,1538726446.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:00:46.065Z,1538726446.065 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-10-05T08:00:46.066Z,1538726446.066 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:00:46.091Z,1538726446.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:00:46.091Z,1538726446.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:00:46.091Z,1538726446.091 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-10-05T08:00:46.466Z,1538726446.466 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:00:46.466Z,1538726446.466 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:00:46.467Z,1538726446.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:00:46.491Z,1538726446.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:00:46.491Z,1538726446.491 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-10-05T08:00:46.862Z,1538726446.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:00:46.862Z,1538726446.862 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:00:46.863Z,1538726446.863 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:02:31.972Z,1538726551.972 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T08:02:31.972Z,1538726551.972 [Default:CheckIn:C.Wait] Stopped
2018-10-05T08:02:31.972Z,1538726551.972 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T08:02:31.972Z,1538726551.972 [Default:CheckIn:D] Running Loop=1
2018-10-05T08:02:32.370Z,1538726552.370 [Default:CheckIn:D] Stopped
2018-10-05T08:02:32.370Z,1538726552.370 [Default:CheckIn:E] Running Loop=1
2018-10-05T08:02:32.781Z,1538726552.781 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1666.076693 min 
2018-10-05T08:02:32.781Z,1538726552.781 [Default:CheckIn:E] Stopped
2018-10-05T08:02:32.781Z,1538726552.781 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T08:02:32.781Z,1538726552.781 [Default:CheckIn] Stopped
2018-10-05T08:02:32.781Z,1538726552.781 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T08:02:32.782Z,1538726552.782 [Default:CheckIn](INFO): Running loop #162
2018-10-05T08:02:32.782Z,1538726552.782 [Default:CheckIn] Running Loop=162
2018-10-05T08:02:32.782Z,1538726552.782 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T08:02:32.782Z,1538726552.782 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T08:03:46.568Z,1538726626.568 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:03:46.568Z,1538726626.568 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-10-05T08:03:46.568Z,1538726626.568 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:03:46.597Z,1538726626.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:03:46.975Z,1538726626.975 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:03:46.975Z,1538726626.975 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-10-05T08:03:46.975Z,1538726626.975 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:03:47.007Z,1538726627.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:03:47.007Z,1538726627.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:03:47.007Z,1538726627.007 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-10-05T08:03:47.373Z,1538726627.373 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:03:47.374Z,1538726627.374 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:03:47.374Z,1538726627.374 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:03:47.399Z,1538726627.399 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:03:47.399Z,1538726627.399 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-10-05T08:03:47.773Z,1538726627.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:03:47.774Z,1538726627.774 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:03:47.774Z,1538726627.774 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:06:47.692Z,1538726807.692 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:06:47.693Z,1538726807.693 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-10-05T08:06:47.693Z,1538726807.693 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:06:47.706Z,1538726807.706 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:06:48.101Z,1538726808.101 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:06:48.101Z,1538726808.101 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-10-05T08:06:48.101Z,1538726808.101 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:06:48.130Z,1538726808.130 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:06:48.130Z,1538726808.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:06:48.130Z,1538726808.130 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-10-05T08:06:48.490Z,1538726808.490 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:06:48.490Z,1538726808.490 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:06:48.491Z,1538726808.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:06:48.511Z,1538726808.511 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:06:48.511Z,1538726808.511 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-10-05T08:06:48.899Z,1538726808.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:06:48.900Z,1538726808.900 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:06:48.900Z,1538726808.900 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:07:35.023Z,1538726855.023 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T08:02:32.8Z
2018-10-05T08:07:35.023Z,1538726855.023 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T08:07:35.023Z,1538726855.023 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T08:07:40.328Z,1538726860.328 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0487.lzma
2018-10-05T08:07:41.130Z,1538726861.130 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0487.lzma.bak
2018-10-05T08:07:41.130Z,1538726861.130 [DataOverHttps](INFO): SBD MOMSN=8611553
2018-10-05T08:07:50.722Z,1538726870.722 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0488.lzma
2018-10-05T08:07:51.497Z,1538726871.497 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0488.lzma.bak
2018-10-05T08:07:51.497Z,1538726871.497 [DataOverHttps](INFO): SBD MOMSN=8611555
2018-10-05T08:07:52.580Z,1538726872.580 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T08:07:52.580Z,1538726872.580 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T08:07:52.580Z,1538726872.580 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T08:09:48.492Z,1538726988.492 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:09:48.493Z,1538726988.493 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-10-05T08:09:48.505Z,1538726988.505 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:09:48.522Z,1538726988.522 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:09:48.915Z,1538726988.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:09:48.916Z,1538726988.916 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-10-05T08:09:49.322Z,1538726989.322 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:09:49.322Z,1538726989.322 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-10-05T08:09:49.322Z,1538726989.322 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:09:49.323Z,1538726989.323 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:09:49.323Z,1538726989.323 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:09:49.324Z,1538726989.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:09:49.349Z,1538726989.349 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:09:49.718Z,1538726989.718 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:09:49.718Z,1538726989.718 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-10-05T08:09:50.112Z,1538726990.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:09:50.117Z,1538726990.117 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:09:50.117Z,1538726990.117 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:10:08.463Z,1538727008.463 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T08:10:08.463Z,1538727008.463 [NAL9602] Data Fault, FailCount= 2
2018-10-05T08:10:08.463Z,1538727008.463 [NAL9602](ERROR): Data Fault
2018-10-05T08:10:08.536Z,1538727008.536 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T08:10:08.859Z,1538727008.859 [NAL9602](INFO): Powering down
2018-10-05T08:10:09.712Z,1538727009.712 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T08:10:09.712Z,1538727009.712 [NAL9602] No Fault, FailCount= 2
2018-10-05T08:10:17.370Z,1538727017.370 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T08:10:17.370Z,1538727017.370 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100501151483,35,   0.0,1448.9,  0
2018-10-05T08:10:38.931Z,1538727038.931 [NAL9602](INFO): Powering up NAL9602
2018-10-05T08:10:52.234Z,1538727052.234 [NAL9602](INFO): NAL9602 initialized
2018-10-05T08:12:49.534Z,1538727169.534 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:12:49.534Z,1538727169.534 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-10-05T08:12:49.534Z,1538727169.534 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:12:49.557Z,1538727169.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:12:49.963Z,1538727169.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:12:49.963Z,1538727169.963 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-10-05T08:12:50.363Z,1538727170.363 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:12:50.364Z,1538727170.364 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-10-05T08:12:50.364Z,1538727170.364 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:12:50.365Z,1538727170.365 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:12:50.365Z,1538727170.365 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:12:50.365Z,1538727170.365 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:12:50.378Z,1538727170.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:12:50.779Z,1538727170.779 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:12:50.779Z,1538727170.779 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-10-05T08:12:51.130Z,1538727171.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:12:51.131Z,1538727171.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:12:51.131Z,1538727171.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:12:52.772Z,1538727172.772 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T08:12:52.773Z,1538727172.773 [Default:CheckIn:C.Wait] Stopped
2018-10-05T08:12:52.773Z,1538727172.773 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T08:12:52.773Z,1538727172.773 [Default:CheckIn:D] Running Loop=1
2018-10-05T08:12:53.151Z,1538727173.151 [Default:CheckIn:D] Stopped
2018-10-05T08:12:53.151Z,1538727173.151 [Default:CheckIn:E] Running Loop=1
2018-10-05T08:12:53.569Z,1538727173.569 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1676.423047 min 
2018-10-05T08:12:53.569Z,1538727173.569 [Default:CheckIn:E] Stopped
2018-10-05T08:12:53.570Z,1538727173.570 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T08:12:53.570Z,1538727173.570 [Default:CheckIn] Stopped
2018-10-05T08:12:53.570Z,1538727173.570 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T08:12:53.570Z,1538727173.570 [Default:CheckIn](INFO): Running loop #163
2018-10-05T08:12:53.570Z,1538727173.570 [Default:CheckIn] Running Loop=163
2018-10-05T08:12:53.570Z,1538727173.570 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T08:12:53.570Z,1538727173.570 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T08:15:50.408Z,1538727350.408 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:15:50.408Z,1538727350.408 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-10-05T08:15:50.408Z,1538727350.408 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:15:50.429Z,1538727350.429 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:15:50.811Z,1538727350.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:15:50.811Z,1538727350.811 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-10-05T08:15:51.211Z,1538727351.211 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:15:51.211Z,1538727351.211 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-10-05T08:15:51.211Z,1538727351.211 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:15:51.212Z,1538727351.212 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:15:51.212Z,1538727351.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:15:51.217Z,1538727351.217 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:15:51.249Z,1538727351.249 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:15:51.629Z,1538727351.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:15:51.633Z,1538727351.633 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-10-05T08:15:51.998Z,1538727351.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:15:51.998Z,1538727351.998 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:15:51.999Z,1538727351.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:17:55.596Z,1538727475.596 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T08:12:53.6Z
2018-10-05T08:17:55.597Z,1538727475.597 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T08:17:55.597Z,1538727475.597 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T08:18:01.785Z,1538727481.785 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0490.lzma
2018-10-05T08:18:02.557Z,1538727482.557 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0490.lzma.bak
2018-10-05T08:18:02.558Z,1538727482.558 [DataOverHttps](INFO): SBD MOMSN=8611559
2018-10-05T08:18:12.193Z,1538727492.193 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0491.lzma
2018-10-05T08:18:12.981Z,1538727492.981 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0491.lzma.bak
2018-10-05T08:18:12.982Z,1538727492.982 [DataOverHttps](INFO): SBD MOMSN=8611561
2018-10-05T08:18:13.938Z,1538727493.938 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T08:18:13.938Z,1538727493.938 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T08:18:13.938Z,1538727493.938 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T08:18:52.583Z,1538727532.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:18:52.583Z,1538727532.583 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-10-05T08:18:52.583Z,1538727532.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:18:52.589Z,1538727532.589 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:18:52.590Z,1538727532.590 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-10-05T08:18:52.590Z,1538727532.590 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:18:52.611Z,1538727532.611 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:18:52.611Z,1538727532.611 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:18:52.750Z,1538727532.750 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:18:52.750Z,1538727532.750 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-10-05T08:18:52.751Z,1538727532.751 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:18:52.751Z,1538727532.751 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-10-05T08:18:53.094Z,1538727533.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:18:53.094Z,1538727533.094 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:18:53.094Z,1538727533.094 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:18:53.095Z,1538727533.095 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:18:53.095Z,1538727533.095 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:18:53.096Z,1538727533.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:20:55.028Z,1538727655.028 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T08:20:55.028Z,1538727655.028 [NAL9602] Data Fault, FailCount= 3
2018-10-05T08:20:55.028Z,1538727655.028 [NAL9602](ERROR): Data Fault
2018-10-05T08:20:55.115Z,1538727655.115 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T08:20:55.407Z,1538727655.407 [NAL9602](INFO): Powering down
2018-10-05T08:20:56.316Z,1538727656.316 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T08:20:56.316Z,1538727656.316 [NAL9602] No Fault, FailCount= 3
2018-10-05T08:21:25.507Z,1538727685.507 [NAL9602](INFO): Powering up NAL9602
2018-10-05T08:21:36.315Z,1538727696.315 [NAL9602](INFO): NAL9602 initialized
2018-10-05T08:21:53.454Z,1538727713.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:21:53.454Z,1538727713.454 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-10-05T08:21:53.454Z,1538727713.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:21:53.456Z,1538727713.456 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:21:53.457Z,1538727713.457 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-10-05T08:21:53.461Z,1538727713.461 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:21:53.488Z,1538727713.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:21:53.489Z,1538727713.489 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:21:53.842Z,1538727713.842 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:21:53.842Z,1538727713.842 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-10-05T08:21:53.843Z,1538727713.843 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:21:53.843Z,1538727713.843 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-10-05T08:21:54.220Z,1538727714.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:21:54.220Z,1538727714.220 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:21:54.225Z,1538727714.225 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:21:54.225Z,1538727714.225 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:21:54.226Z,1538727714.226 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:21:54.226Z,1538727714.226 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:23:14.284Z,1538727794.284 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T08:23:14.289Z,1538727794.289 [Default:CheckIn:C.Wait] Stopped
2018-10-05T08:23:14.289Z,1538727794.289 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T08:23:14.289Z,1538727794.289 [Default:CheckIn:D] Running Loop=1
2018-10-05T08:23:14.685Z,1538727794.685 [Default:CheckIn:D] Stopped
2018-10-05T08:23:14.685Z,1538727794.685 [Default:CheckIn:E] Running Loop=1
2018-10-05T08:23:15.107Z,1538727795.107 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1686.781901 min 
2018-10-05T08:23:15.108Z,1538727795.108 [Default:CheckIn:E] Stopped
2018-10-05T08:23:15.108Z,1538727795.108 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T08:23:15.108Z,1538727795.108 [Default:CheckIn] Stopped
2018-10-05T08:23:15.108Z,1538727795.108 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T08:23:15.108Z,1538727795.108 [Default:CheckIn](INFO): Running loop #164
2018-10-05T08:23:15.108Z,1538727795.108 [Default:CheckIn] Running Loop=164
2018-10-05T08:23:15.108Z,1538727795.108 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T08:23:15.109Z,1538727795.109 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T08:24:54.357Z,1538727894.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:24:54.357Z,1538727894.357 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-10-05T08:24:54.358Z,1538727894.358 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:24:54.359Z,1538727894.359 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:24:54.360Z,1538727894.360 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-10-05T08:24:54.360Z,1538727894.360 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:24:54.389Z,1538727894.389 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:24:54.390Z,1538727894.390 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:24:54.756Z,1538727894.756 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:24:54.756Z,1538727894.756 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-10-05T08:24:54.757Z,1538727894.757 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:24:54.757Z,1538727894.757 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-10-05T08:24:55.154Z,1538727895.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:24:55.154Z,1538727895.154 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:24:55.155Z,1538727895.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:24:55.155Z,1538727895.155 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:24:55.155Z,1538727895.155 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:24:55.156Z,1538727895.156 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:26:19.757Z,1538727979.757 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T08:27:55.272Z,1538728075.272 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:27:55.272Z,1538728075.272 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-10-05T08:27:55.272Z,1538728075.272 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:27:55.278Z,1538728075.278 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:27:55.278Z,1538728075.278 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-10-05T08:27:55.278Z,1538728075.278 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:27:55.300Z,1538728075.300 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:27:55.300Z,1538728075.300 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:27:55.703Z,1538728075.703 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:27:55.703Z,1538728075.703 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-10-05T08:27:55.704Z,1538728075.704 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:27:55.704Z,1538728075.704 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-10-05T08:27:56.086Z,1538728076.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:27:56.086Z,1538728076.086 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:27:56.087Z,1538728076.087 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:27:56.087Z,1538728076.087 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:27:56.088Z,1538728076.088 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:27:56.088Z,1538728076.088 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:28:16.887Z,1538728096.887 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T08:23:15.1Z
2018-10-05T08:28:16.888Z,1538728096.888 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T08:28:16.888Z,1538728096.888 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T08:28:17.621Z,1538728097.621 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.887, -0.007, 0.000
2018-10-05T08:28:21.818Z,1538728101.818 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0493.lzma
2018-10-05T08:28:22.599Z,1538728102.599 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0493.lzma.bak
2018-10-05T08:28:22.599Z,1538728102.599 [DataOverHttps](INFO): SBD MOMSN=8611565
2018-10-05T08:28:32.166Z,1538728112.166 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0494.lzma
2018-10-05T08:28:32.941Z,1538728112.941 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0494.lzma.bak
2018-10-05T08:28:32.941Z,1538728112.941 [DataOverHttps](INFO): SBD MOMSN=8611567
2018-10-05T08:28:33.917Z,1538728113.917 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T08:28:33.917Z,1538728113.917 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T08:28:33.917Z,1538728113.917 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T08:28:49.280Z,1538728129.280 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.894, 0.002, 65.535
2018-10-05T08:30:58.788Z,1538728258.788 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:30:58.789Z,1538728258.789 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-10-05T08:30:58.789Z,1538728258.789 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:30:58.791Z,1538728258.791 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:30:58.791Z,1538728258.791 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-10-05T08:30:58.791Z,1538728258.791 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:30:58.804Z,1538728258.804 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:30:58.805Z,1538728258.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:30:58.935Z,1538728258.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:30:58.935Z,1538728258.935 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-10-05T08:30:58.935Z,1538728258.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:30:58.935Z,1538728258.935 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-10-05T08:30:59.291Z,1538728259.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:30:59.291Z,1538728259.291 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:30:59.291Z,1538728259.291 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:30:59.292Z,1538728259.292 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:30:59.292Z,1538728259.292 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:30:59.295Z,1538728259.295 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:31:37.335Z,1538728297.335 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T08:31:37.335Z,1538728297.335 [NAL9602] Data Fault, FailCount= 4
2018-10-05T08:31:37.335Z,1538728297.335 [NAL9602](ERROR): Data Fault
2018-10-05T08:31:37.500Z,1538728297.500 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T08:31:37.735Z,1538728297.735 [NAL9602](INFO): Powering down
2018-10-05T08:31:38.594Z,1538728298.594 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T08:31:38.594Z,1538728298.594 [NAL9602] No Fault, FailCount= 4
2018-10-05T08:32:10.052Z,1538728330.052 [NAL9602](INFO): Powering up NAL9602
2018-10-05T08:32:20.976Z,1538728340.976 [NAL9602](INFO): NAL9602 initialized
2018-10-05T08:33:34.029Z,1538728414.029 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T08:33:34.030Z,1538728414.030 [RDI_Pathfinder](ERROR): Failed to parse:
:TS768,-32768,-32768,V
2018-10-05T08:33:34.402Z,1538728414.402 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T08:33:34.402Z,1538728414.402 [Default:CheckIn:C.Wait] Stopped
2018-10-05T08:33:34.402Z,1538728414.402 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T08:33:34.403Z,1538728414.403 [Default:CheckIn:D] Running Loop=1
2018-10-05T08:33:34.800Z,1538728414.800 [Default:CheckIn:D] Stopped
2018-10-05T08:33:34.800Z,1538728414.800 [Default:CheckIn:E] Running Loop=1
2018-10-05T08:33:35.231Z,1538728415.231 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1697.117188 min 
2018-10-05T08:33:35.231Z,1538728415.231 [Default:CheckIn:E] Stopped
2018-10-05T08:33:35.231Z,1538728415.231 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T08:33:35.232Z,1538728415.232 [Default:CheckIn] Stopped
2018-10-05T08:33:35.232Z,1538728415.232 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T08:33:35.232Z,1538728415.232 [Default:CheckIn](INFO): Running loop #165
2018-10-05T08:33:35.232Z,1538728415.232 [Default:CheckIn] Running Loop=165
2018-10-05T08:33:35.232Z,1538728415.232 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T08:33:35.232Z,1538728415.232 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T08:33:59.347Z,1538728439.347 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:33:59.347Z,1538728439.347 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-10-05T08:33:59.347Z,1538728439.347 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:33:59.353Z,1538728439.353 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:33:59.354Z,1538728439.354 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-10-05T08:33:59.354Z,1538728439.354 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:33:59.375Z,1538728439.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:33:59.376Z,1538728439.376 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:33:59.739Z,1538728439.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:33:59.739Z,1538728439.739 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-10-05T08:33:59.740Z,1538728439.740 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:33:59.740Z,1538728439.740 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-10-05T08:34:00.134Z,1538728440.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:34:00.134Z,1538728440.134 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:34:00.135Z,1538728440.135 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:34:00.135Z,1538728440.135 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:34:00.135Z,1538728440.135 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:34:00.136Z,1538728440.136 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:35:42.441Z,1538728542.441 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.847,*-0.008,*0.000
2018-10-05T08:37:00.473Z,1538728620.473 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:37:00.474Z,1538728620.474 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-10-05T08:37:00.474Z,1538728620.474 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:37:00.476Z,1538728620.476 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:37:00.476Z,1538728620.476 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-10-05T08:37:00.476Z,1538728620.476 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:37:00.490Z,1538728620.490 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:37:00.490Z,1538728620.490 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:37:00.885Z,1538728620.885 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:37:00.885Z,1538728620.885 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-10-05T08:37:00.886Z,1538728620.886 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:37:00.886Z,1538728620.886 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-10-05T08:37:01.282Z,1538728621.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:37:01.282Z,1538728621.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:37:01.282Z,1538728621.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:37:01.283Z,1538728621.283 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:37:01.283Z,1538728621.283 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:37:01.284Z,1538728621.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:38:37.448Z,1538728717.448 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T08:33:35.2Z
2018-10-05T08:38:37.449Z,1538728717.449 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T08:38:37.453Z,1538728717.453 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T08:38:38.185Z,1538728718.185 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0496.lzma
2018-10-05T08:38:38.710Z,1538728718.710 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0496.lzma.bak
2018-10-05T08:38:38.710Z,1538728718.710 [DataOverHttps](INFO): SBD MOMSN=8611571
2018-10-05T08:38:48.756Z,1538728728.756 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0497.lzma
2018-10-05T08:38:49.534Z,1538728729.534 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0497.lzma.bak
2018-10-05T08:38:49.534Z,1538728729.534 [DataOverHttps](INFO): SBD MOMSN=8611573
2018-10-05T08:38:50.535Z,1538728730.535 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T08:38:50.535Z,1538728730.535 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T08:38:50.535Z,1538728730.535 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T08:40:04.469Z,1538728804.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:40:04.469Z,1538728804.469 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-10-05T08:40:04.469Z,1538728804.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:40:04.471Z,1538728804.471 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:40:04.471Z,1538728804.471 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-10-05T08:40:04.471Z,1538728804.471 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:40:04.485Z,1538728804.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:40:04.485Z,1538728804.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:40:04.619Z,1538728804.619 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:40:04.619Z,1538728804.619 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-10-05T08:40:04.620Z,1538728804.620 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:40:04.620Z,1538728804.620 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-10-05T08:40:04.938Z,1538728804.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:40:04.938Z,1538728804.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:40:04.939Z,1538728804.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:40:04.939Z,1538728804.939 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:40:04.939Z,1538728804.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:40:04.940Z,1538728804.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:42:22.423Z,1538728942.423 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T08:42:22.423Z,1538728942.423 [NAL9602] Data Fault, FailCount= 5
2018-10-05T08:42:22.423Z,1538728942.423 [NAL9602](ERROR): Data Fault
2018-10-05T08:42:22.501Z,1538728942.501 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T08:42:22.501Z,1538728942.501 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T08:42:25.594Z,1538728945.594 [NAL9602](INFO): Powering down
2018-10-05T08:42:25.668Z,1538728945.668 [CBIT](INFO): Critical error at 20181005T084222
2018-10-05T08:43:05.028Z,1538728985.028 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:43:05.028Z,1538728985.028 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-10-05T08:43:05.028Z,1538728985.028 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:43:05.031Z,1538728985.031 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:43:05.031Z,1538728985.031 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-10-05T08:43:05.031Z,1538728985.031 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:43:05.057Z,1538728985.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:43:05.058Z,1538728985.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:43:05.410Z,1538728985.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:43:05.410Z,1538728985.410 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-10-05T08:43:05.411Z,1538728985.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:43:05.411Z,1538728985.411 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-10-05T08:43:05.802Z,1538728985.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:43:05.803Z,1538728985.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:43:05.803Z,1538728985.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:43:05.804Z,1538728985.804 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:43:05.804Z,1538728985.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:43:05.804Z,1538728985.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:43:50.741Z,1538729030.741 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T08:43:50.742Z,1538729030.742 [Default:CheckIn:C.Wait] Stopped
2018-10-05T08:43:50.742Z,1538729030.742 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T08:43:50.742Z,1538729030.742 [Default:CheckIn:D] Running Loop=1
2018-10-05T08:43:51.163Z,1538729031.163 [Default:CheckIn:D] Stopped
2018-10-05T08:43:51.163Z,1538729031.163 [Default:CheckIn:E] Running Loop=1
2018-10-05T08:43:51.548Z,1538729031.548 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1707.389844 min 
2018-10-05T08:43:51.549Z,1538729031.549 [Default:CheckIn:E] Stopped
2018-10-05T08:43:51.549Z,1538729031.549 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T08:43:51.549Z,1538729031.549 [Default:CheckIn] Stopped
2018-10-05T08:43:51.549Z,1538729031.549 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T08:43:51.549Z,1538729031.549 [Default:CheckIn](INFO): Running loop #166
2018-10-05T08:43:51.549Z,1538729031.549 [Default:CheckIn] Running Loop=166
2018-10-05T08:43:51.550Z,1538729031.550 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T08:43:51.550Z,1538729031.550 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T08:44:22.455Z,1538729062.455 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T08:44:22.456Z,1538729062.456 [NAL9602] No Fault, FailCount= 5
2018-10-05T08:44:22.759Z,1538729062.759 [NAL9602](INFO): Powering up NAL9602
2018-10-05T08:44:33.572Z,1538729073.572 [NAL9602](INFO): NAL9602 initialized
2018-10-05T08:46:05.809Z,1538729165.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:46:05.809Z,1538729165.809 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-10-05T08:46:05.809Z,1538729165.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:46:05.811Z,1538729165.811 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:46:05.811Z,1538729165.811 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-10-05T08:46:05.811Z,1538729165.811 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:46:05.825Z,1538729165.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:46:05.825Z,1538729165.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:46:06.240Z,1538729166.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:46:06.240Z,1538729166.240 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-10-05T08:46:06.240Z,1538729166.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:46:06.240Z,1538729166.240 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-10-05T08:46:06.597Z,1538729166.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:46:06.598Z,1538729166.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:46:06.598Z,1538729166.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:46:06.598Z,1538729166.598 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:46:06.599Z,1538729166.599 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:46:06.599Z,1538729166.599 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:47:09.255Z,1538729229.255 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T08:48:53.891Z,1538729333.891 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T08:43:51.5Z
2018-10-05T08:48:53.891Z,1538729333.891 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T08:48:53.891Z,1538729333.891 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T08:48:59.017Z,1538729339.017 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0499.lzma
2018-10-05T08:48:59.774Z,1538729339.774 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0499.lzma.bak
2018-10-05T08:48:59.774Z,1538729339.774 [DataOverHttps](INFO): SBD MOMSN=8611577
2018-10-05T08:49:08.943Z,1538729348.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:49:08.943Z,1538729348.943 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-10-05T08:49:08.943Z,1538729348.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:49:08.945Z,1538729348.945 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:49:08.945Z,1538729348.945 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-10-05T08:49:08.945Z,1538729348.945 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:49:08.986Z,1538729348.986 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:49:08.986Z,1538729348.986 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:49:09.111Z,1538729349.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:49:09.111Z,1538729349.111 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-10-05T08:49:09.111Z,1538729349.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:49:09.112Z,1538729349.112 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-10-05T08:49:09.470Z,1538729349.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:49:09.470Z,1538729349.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:49:09.471Z,1538729349.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:49:09.471Z,1538729349.471 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:49:09.471Z,1538729349.471 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:49:09.472Z,1538729349.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:49:09.814Z,1538729349.814 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0500.lzma
2018-10-05T08:49:10.617Z,1538729350.617 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0500.lzma.bak
2018-10-05T08:49:10.618Z,1538729350.618 [DataOverHttps](INFO): SBD MOMSN=8611580
2018-10-05T08:49:11.584Z,1538729351.584 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T08:49:11.584Z,1538729351.584 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T08:49:11.585Z,1538729351.585 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T08:52:11.256Z,1538729531.256 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:52:11.257Z,1538729531.257 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-10-05T08:52:11.257Z,1538729531.257 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:52:11.259Z,1538729531.259 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:52:11.259Z,1538729531.259 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-10-05T08:52:11.259Z,1538729531.259 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:52:11.272Z,1538729531.272 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:52:11.272Z,1538729531.272 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:52:11.411Z,1538729531.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:52:11.411Z,1538729531.411 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-10-05T08:52:11.412Z,1538729531.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:52:11.412Z,1538729531.412 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-10-05T08:52:11.766Z,1538729531.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:52:11.766Z,1538729531.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:52:11.767Z,1538729531.767 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:52:11.767Z,1538729531.767 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:52:11.767Z,1538729531.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:52:11.768Z,1538729531.768 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:54:12.005Z,1538729652.005 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T08:54:12.005Z,1538729652.005 [Default:CheckIn:C.Wait] Stopped
2018-10-05T08:54:12.005Z,1538729652.005 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T08:54:12.005Z,1538729652.005 [Default:CheckIn:D] Running Loop=1
2018-10-05T08:54:12.418Z,1538729652.418 [Default:CheckIn:D] Stopped
2018-10-05T08:54:12.418Z,1538729652.418 [Default:CheckIn:E] Running Loop=1
2018-10-05T08:54:12.797Z,1538729652.797 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1717.744141 min 
2018-10-05T08:54:12.798Z,1538729652.798 [Default:CheckIn:E] Stopped
2018-10-05T08:54:12.798Z,1538729652.798 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T08:54:12.798Z,1538729652.798 [Default:CheckIn] Stopped
2018-10-05T08:54:12.798Z,1538729652.798 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T08:54:12.798Z,1538729652.798 [Default:CheckIn](INFO): Running loop #167
2018-10-05T08:54:12.798Z,1538729652.798 [Default:CheckIn] Running Loop=167
2018-10-05T08:54:12.798Z,1538729652.798 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T08:54:12.799Z,1538729652.799 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T08:54:34.423Z,1538729674.423 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T08:54:34.423Z,1538729674.423 [NAL9602] Data Fault, FailCount= 1
2018-10-05T08:54:34.423Z,1538729674.423 [NAL9602](ERROR): Data Fault
2018-10-05T08:54:34.504Z,1538729674.504 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T08:54:34.823Z,1538729674.823 [NAL9602](INFO): Powering down
2018-10-05T08:54:35.688Z,1538729675.688 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T08:54:35.688Z,1538729675.688 [NAL9602] No Fault, FailCount= 1
2018-10-05T08:55:07.600Z,1538729707.600 [NAL9602](INFO): Powering up NAL9602
2018-10-05T08:55:12.131Z,1538729712.131 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:55:12.131Z,1538729712.131 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-10-05T08:55:12.131Z,1538729712.131 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:55:12.153Z,1538729712.153 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:55:12.153Z,1538729712.153 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-10-05T08:55:12.153Z,1538729712.153 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:55:12.179Z,1538729712.179 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:55:12.179Z,1538729712.179 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:55:12.589Z,1538729712.589 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:55:12.589Z,1538729712.589 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-10-05T08:55:12.590Z,1538729712.590 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:55:12.590Z,1538729712.590 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-10-05T08:55:12.929Z,1538729712.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:55:12.930Z,1538729712.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:55:12.930Z,1538729712.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:55:12.931Z,1538729712.931 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:55:12.931Z,1538729712.931 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:55:12.931Z,1538729712.931 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:55:18.507Z,1538729718.507 [NAL9602](INFO): NAL9602 initialized
2018-10-05T08:58:13.048Z,1538729893.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:58:13.048Z,1538729893.048 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-10-05T08:58:13.048Z,1538729893.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T08:58:13.050Z,1538729893.050 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T08:58:13.050Z,1538729893.050 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-10-05T08:58:13.050Z,1538729893.050 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T08:58:13.063Z,1538729893.063 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T08:58:13.064Z,1538729893.064 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T08:58:13.488Z,1538729893.488 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T08:58:13.488Z,1538729893.488 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-10-05T08:58:13.489Z,1538729893.489 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T08:58:13.493Z,1538729893.493 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-10-05T08:58:13.826Z,1538729893.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T08:58:13.826Z,1538729893.826 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:58:13.826Z,1538729893.826 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:58:13.827Z,1538729893.827 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T08:58:13.827Z,1538729893.827 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T08:58:13.828Z,1538729893.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T08:59:14.367Z,1538729954.367 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T08:54:12.8Z
2018-10-05T08:59:14.367Z,1538729954.367 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T08:59:14.368Z,1538729954.368 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T08:59:19.290Z,1538729959.290 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0502.lzma
2018-10-05T08:59:20.058Z,1538729960.058 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0502.lzma.bak
2018-10-05T08:59:20.058Z,1538729960.058 [DataOverHttps](INFO): SBD MOMSN=8611584
2018-10-05T08:59:30.058Z,1538729970.058 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0503.lzma
2018-10-05T08:59:30.810Z,1538729970.810 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0503.lzma.bak
2018-10-05T08:59:30.810Z,1538729970.810 [DataOverHttps](INFO): SBD MOMSN=8611586
2018-10-05T08:59:31.751Z,1538729971.751 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T08:59:31.751Z,1538729971.751 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T08:59:31.751Z,1538729971.751 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T09:01:13.863Z,1538730073.863 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:01:13.863Z,1538730073.863 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-10-05T09:01:13.863Z,1538730073.863 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:01:13.869Z,1538730073.869 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:01:13.869Z,1538730073.869 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-10-05T09:01:13.869Z,1538730073.869 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:01:13.891Z,1538730073.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:01:13.891Z,1538730073.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:01:14.298Z,1538730074.298 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:01:14.298Z,1538730074.298 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-10-05T09:01:14.298Z,1538730074.298 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:01:14.298Z,1538730074.298 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-10-05T09:01:14.674Z,1538730074.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:01:14.674Z,1538730074.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:01:14.675Z,1538730074.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:01:14.675Z,1538730074.675 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:01:14.676Z,1538730074.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:01:14.676Z,1538730074.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:04:16.920Z,1538730256.920 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:04:16.920Z,1538730256.920 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-10-05T09:04:16.920Z,1538730256.920 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:04:16.956Z,1538730256.956 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:04:16.956Z,1538730256.956 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-10-05T09:04:16.956Z,1538730256.956 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:04:16.980Z,1538730256.980 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:04:16.980Z,1538730256.980 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:04:17.115Z,1538730257.115 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:04:17.115Z,1538730257.115 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-10-05T09:04:17.116Z,1538730257.116 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:04:17.116Z,1538730257.116 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-10-05T09:04:17.470Z,1538730257.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:04:17.470Z,1538730257.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:04:17.470Z,1538730257.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:04:17.471Z,1538730257.471 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:04:17.471Z,1538730257.471 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:04:17.472Z,1538730257.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:04:18.243Z,1538730258.243 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T09:04:31.889Z,1538730271.889 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T09:04:31.889Z,1538730271.889 [Default:CheckIn:C.Wait] Stopped
2018-10-05T09:04:31.889Z,1538730271.889 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T09:04:31.890Z,1538730271.890 [Default:CheckIn:D] Running Loop=1
2018-10-05T09:04:32.267Z,1538730272.267 [Default:CheckIn:D] Stopped
2018-10-05T09:04:32.268Z,1538730272.268 [Default:CheckIn:E] Running Loop=1
2018-10-05T09:04:32.681Z,1538730272.681 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1728.075000 min 
2018-10-05T09:04:32.682Z,1538730272.682 [Default:CheckIn:E] Stopped
2018-10-05T09:04:32.682Z,1538730272.682 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T09:04:32.682Z,1538730272.682 [Default:CheckIn] Stopped
2018-10-05T09:04:32.682Z,1538730272.682 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T09:04:32.682Z,1538730272.682 [Default:CheckIn](INFO): Running loop #168
2018-10-05T09:04:32.682Z,1538730272.682 [Default:CheckIn] Running Loop=168
2018-10-05T09:04:32.682Z,1538730272.682 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T09:04:32.683Z,1538730272.683 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T09:05:20.683Z,1538730320.683 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T09:05:20.683Z,1538730320.683 [NAL9602] Data Fault, FailCount= 2
2018-10-05T09:05:20.683Z,1538730320.683 [NAL9602](ERROR): Data Fault
2018-10-05T09:05:20.752Z,1538730320.752 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T09:05:21.087Z,1538730321.087 [NAL9602](INFO): Powering down
2018-10-05T09:05:21.948Z,1538730321.948 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T09:05:21.948Z,1538730321.948 [NAL9602] No Fault, FailCount= 2
2018-10-05T09:05:51.179Z,1538730351.179 [NAL9602](INFO): Powering up NAL9602
2018-10-05T09:06:03.314Z,1538730363.314 [NAL9602](INFO): NAL9602 initialized
2018-10-05T09:07:17.508Z,1538730437.508 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:07:17.508Z,1538730437.508 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-10-05T09:07:17.508Z,1538730437.508 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:07:17.510Z,1538730437.510 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:07:17.510Z,1538730437.510 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-10-05T09:07:17.510Z,1538730437.510 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:07:17.523Z,1538730437.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:07:17.524Z,1538730437.524 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:07:17.932Z,1538730437.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:07:17.932Z,1538730437.932 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-10-05T09:07:17.938Z,1538730437.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:07:17.938Z,1538730437.938 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-10-05T09:07:18.309Z,1538730438.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:07:18.309Z,1538730438.309 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:07:18.310Z,1538730438.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:07:18.310Z,1538730438.310 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:07:18.311Z,1538730438.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:07:18.311Z,1538730438.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:09:34.558Z,1538730574.558 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T09:04:32.7Z
2018-10-05T09:09:34.558Z,1538730574.558 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T09:09:34.558Z,1538730574.558 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T09:09:40.334Z,1538730580.334 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0505.lzma
2018-10-05T09:09:41.135Z,1538730581.135 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0505.lzma.bak
2018-10-05T09:09:41.135Z,1538730581.135 [DataOverHttps](INFO): SBD MOMSN=8611590
2018-10-05T09:09:50.401Z,1538730590.401 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0506.lzma
2018-10-05T09:09:51.170Z,1538730591.170 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0506.lzma.bak
2018-10-05T09:09:51.170Z,1538730591.170 [DataOverHttps](INFO): SBD MOMSN=8611592
2018-10-05T09:09:52.100Z,1538730592.100 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T09:09:52.100Z,1538730592.100 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T09:09:52.100Z,1538730592.100 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T09:10:18.659Z,1538730618.659 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:10:18.660Z,1538730618.660 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-10-05T09:10:18.660Z,1538730618.660 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:10:18.666Z,1538730618.666 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:10:18.666Z,1538730618.666 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-10-05T09:10:18.666Z,1538730618.666 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:10:18.702Z,1538730618.702 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:10:18.703Z,1538730618.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:10:19.098Z,1538730619.098 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:10:19.098Z,1538730619.098 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-10-05T09:10:19.099Z,1538730619.099 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:10:19.099Z,1538730619.099 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-10-05T09:10:19.458Z,1538730619.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:10:19.459Z,1538730619.459 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:10:19.459Z,1538730619.459 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:10:19.460Z,1538730619.460 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:10:19.460Z,1538730619.460 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:10:19.460Z,1538730619.460 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:13:19.508Z,1538730799.508 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:13:19.508Z,1538730799.508 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-10-05T09:13:19.508Z,1538730799.508 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:13:19.510Z,1538730799.510 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:13:19.510Z,1538730799.510 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-10-05T09:13:19.510Z,1538730799.510 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:13:19.532Z,1538730799.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:13:19.532Z,1538730799.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:13:19.935Z,1538730799.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:13:19.935Z,1538730799.935 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-10-05T09:13:19.935Z,1538730799.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:13:19.936Z,1538730799.936 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-10-05T09:13:20.330Z,1538730800.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:13:20.330Z,1538730800.330 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:13:20.331Z,1538730800.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:13:20.331Z,1538730800.331 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:13:20.332Z,1538730800.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:13:20.332Z,1538730800.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:14:52.297Z,1538730892.297 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T09:14:52.298Z,1538730892.298 [Default:CheckIn:C.Wait] Stopped
2018-10-05T09:14:52.298Z,1538730892.298 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T09:14:52.298Z,1538730892.298 [Default:CheckIn:D] Running Loop=1
2018-10-05T09:14:52.708Z,1538730892.708 [Default:CheckIn:D] Stopped
2018-10-05T09:14:52.708Z,1538730892.708 [Default:CheckIn:E] Running Loop=1
2018-10-05T09:14:53.083Z,1538730893.083 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1738.415625 min 
2018-10-05T09:14:53.083Z,1538730893.083 [Default:CheckIn:E] Stopped
2018-10-05T09:14:53.083Z,1538730893.083 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T09:14:53.083Z,1538730893.083 [Default:CheckIn] Stopped
2018-10-05T09:14:53.084Z,1538730893.084 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T09:14:53.084Z,1538730893.084 [Default:CheckIn](INFO): Running loop #169
2018-10-05T09:14:53.084Z,1538730893.084 [Default:CheckIn] Running Loop=169
2018-10-05T09:14:53.084Z,1538730893.084 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T09:14:53.084Z,1538730893.084 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T09:16:05.287Z,1538730965.287 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T09:16:05.287Z,1538730965.287 [NAL9602] Data Fault, FailCount= 3
2018-10-05T09:16:05.287Z,1538730965.287 [NAL9602](ERROR): Data Fault
2018-10-05T09:16:05.383Z,1538730965.383 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T09:16:05.679Z,1538730965.679 [NAL9602](INFO): Powering down
2018-10-05T09:16:06.535Z,1538730966.535 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T09:16:06.535Z,1538730966.535 [NAL9602] No Fault, FailCount= 3
2018-10-05T09:16:20.519Z,1538730980.519 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:16:20.519Z,1538730980.519 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-10-05T09:16:20.519Z,1538730980.519 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:16:20.525Z,1538730980.525 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:16:20.525Z,1538730980.525 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-10-05T09:16:20.525Z,1538730980.525 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:16:20.550Z,1538730980.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:16:20.550Z,1538730980.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:16:20.974Z,1538730980.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:16:20.974Z,1538730980.974 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-10-05T09:16:20.975Z,1538730980.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:16:20.975Z,1538730980.975 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-10-05T09:16:24.319Z,1538730984.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:16:24.319Z,1538730984.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:16:24.320Z,1538730984.320 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:16:24.320Z,1538730984.320 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:16:24.320Z,1538730984.320 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:16:24.321Z,1538730984.321 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:16:35.955Z,1538730995.955 [NAL9602](INFO): Powering up NAL9602
2018-10-05T09:16:46.755Z,1538731006.755 [NAL9602](INFO): NAL9602 initialized
2018-10-05T09:19:24.511Z,1538731164.511 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:19:24.511Z,1538731164.511 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-10-05T09:19:24.511Z,1538731164.511 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:19:24.529Z,1538731164.529 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:19:24.529Z,1538731164.529 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-10-05T09:19:24.529Z,1538731164.529 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:19:24.555Z,1538731164.555 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:19:24.555Z,1538731164.555 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:19:24.964Z,1538731164.964 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:19:24.964Z,1538731164.964 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-10-05T09:19:24.965Z,1538731164.965 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:19:24.965Z,1538731164.965 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-10-05T09:19:25.335Z,1538731165.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:19:25.335Z,1538731165.335 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:19:25.336Z,1538731165.336 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:19:25.336Z,1538731165.336 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:19:25.337Z,1538731165.337 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:19:25.337Z,1538731165.337 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:19:56.148Z,1538731196.148 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T09:14:53.1Z
2018-10-05T09:19:56.148Z,1538731196.148 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T09:19:56.148Z,1538731196.148 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T09:20:01.127Z,1538731201.127 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0508.lzma
2018-10-05T09:20:01.885Z,1538731201.885 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0508.lzma.bak
2018-10-05T09:20:01.886Z,1538731201.886 [DataOverHttps](INFO): SBD MOMSN=8611596
2018-10-05T09:20:11.116Z,1538731211.116 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20181004T041305/Express0509.lzma
2018-10-05T09:20:11.862Z,1538731211.862 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0509.lzma.bak
2018-10-05T09:20:11.862Z,1538731211.862 [DataOverHttps](INFO): SBD MOMSN=8611598
2018-10-05T09:20:13.028Z,1538731213.028 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T09:20:13.028Z,1538731213.028 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T09:20:13.028Z,1538731213.028 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T09:22:25.491Z,1538731345.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:22:25.491Z,1538731345.491 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-10-05T09:22:25.491Z,1538731345.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:22:25.493Z,1538731345.493 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:22:25.493Z,1538731345.493 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-10-05T09:22:25.493Z,1538731345.493 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:22:25.526Z,1538731345.526 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:22:25.527Z,1538731345.527 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:22:25.932Z,1538731345.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:22:25.932Z,1538731345.932 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-10-05T09:22:25.938Z,1538731345.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:22:25.938Z,1538731345.938 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-10-05T09:22:26.291Z,1538731346.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:22:26.291Z,1538731346.291 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:22:26.292Z,1538731346.292 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:22:26.292Z,1538731346.292 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:22:26.293Z,1538731346.293 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:22:26.293Z,1538731346.293 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:23:43.684Z,1538731423.684 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.887,*-0.008,*0.000
2018-10-05T09:25:13.153Z,1538731513.153 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T09:25:13.158Z,1538731513.158 [Default:CheckIn:C.Wait] Stopped
2018-10-05T09:25:13.158Z,1538731513.158 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T09:25:13.158Z,1538731513.158 [Default:CheckIn:D] Running Loop=1
2018-10-05T09:25:13.556Z,1538731513.556 [Default:CheckIn:D] Stopped
2018-10-05T09:25:13.556Z,1538731513.556 [Default:CheckIn:E] Running Loop=1
2018-10-05T09:25:13.968Z,1538731513.968 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1748.763151 min 
2018-10-05T09:25:13.968Z,1538731513.968 [Default:CheckIn:E] Stopped
2018-10-05T09:25:13.968Z,1538731513.968 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T09:25:13.968Z,1538731513.968 [Default:CheckIn] Stopped
2018-10-05T09:25:13.968Z,1538731513.968 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T09:25:13.969Z,1538731513.969 [Default:CheckIn](INFO): Running loop #170
2018-10-05T09:25:13.969Z,1538731513.969 [Default:CheckIn] Running Loop=170
2018-10-05T09:25:13.969Z,1538731513.969 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T09:25:13.969Z,1538731513.969 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T09:25:26.343Z,1538731526.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:25:26.343Z,1538731526.343 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-10-05T09:25:26.343Z,1538731526.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:25:26.345Z,1538731526.345 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:25:26.345Z,1538731526.345 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-10-05T09:25:26.345Z,1538731526.345 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:25:26.366Z,1538731526.366 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:25:26.367Z,1538731526.367 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:25:26.758Z,1538731526.758 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:25:26.758Z,1538731526.758 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-10-05T09:25:26.758Z,1538731526.758 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:25:26.758Z,1538731526.758 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-10-05T09:25:27.157Z,1538731527.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:25:27.157Z,1538731527.157 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:25:27.157Z,1538731527.157 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:25:27.158Z,1538731527.158 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:25:27.158Z,1538731527.158 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:25:27.159Z,1538731527.159 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:25:35.217Z,1538731535.217 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T09:26:47.727Z,1538731607.727 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T09:26:47.727Z,1538731607.727 [NAL9602] Data Fault, FailCount= 4
2018-10-05T09:26:47.727Z,1538731607.727 [NAL9602](ERROR): Data Fault
2018-10-05T09:26:47.790Z,1538731607.790 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T09:26:48.127Z,1538731608.127 [NAL9602](INFO): Powering down
2018-10-05T09:26:49.001Z,1538731609.001 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T09:26:49.002Z,1538731609.002 [NAL9602] No Fault, FailCount= 4
2018-10-05T09:27:19.690Z,1538731639.690 [NAL9602](INFO): Powering up NAL9602
2018-10-05T09:27:30.621Z,1538731650.621 [NAL9602](INFO): NAL9602 initialized
2018-10-05T09:28:30.132Z,1538731710.132 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:28:30.133Z,1538731710.133 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-10-05T09:28:30.133Z,1538731710.133 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:28:30.135Z,1538731710.135 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:28:30.135Z,1538731710.135 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-10-05T09:28:30.135Z,1538731710.135 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:28:30.152Z,1538731710.152 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:28:30.152Z,1538731710.152 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:28:30.296Z,1538731710.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:28:30.297Z,1538731710.297 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-10-05T09:28:30.301Z,1538731710.301 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:28:30.301Z,1538731710.301 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-10-05T09:28:30.616Z,1538731710.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:28:30.628Z,1538731710.628 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:28:30.628Z,1538731710.628 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:28:30.629Z,1538731710.629 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:28:30.629Z,1538731710.629 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:28:30.630Z,1538731710.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:30:15.749Z,1538731815.749 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T09:25:13.0Z
2018-10-05T09:30:15.749Z,1538731815.749 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T09:30:15.749Z,1538731815.749 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T09:30:20.720Z,1538731820.720 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0511.lzma
2018-10-05T09:30:21.502Z,1538731821.502 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0511.lzma.bak
2018-10-05T09:30:21.502Z,1538731821.502 [DataOverHttps](INFO): SBD MOMSN=8611602
2018-10-05T09:30:30.880Z,1538731830.880 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0512.lzma
2018-10-05T09:30:31.645Z,1538731831.645 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0512.lzma.bak
2018-10-05T09:30:31.646Z,1538731831.646 [DataOverHttps](INFO): SBD MOMSN=8611604
2018-10-05T09:30:32.628Z,1538731832.628 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T09:30:32.628Z,1538731832.628 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T09:30:32.629Z,1538731832.629 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T09:30:37.214Z,1538731837.214 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T09:31:30.695Z,1538731890.695 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:31:30.695Z,1538731890.695 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-10-05T09:31:30.695Z,1538731890.695 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:31:30.701Z,1538731890.701 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:31:30.701Z,1538731890.701 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-10-05T09:31:30.702Z,1538731890.702 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:31:30.723Z,1538731890.723 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:31:30.723Z,1538731890.723 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:31:31.140Z,1538731891.140 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:31:31.140Z,1538731891.140 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-10-05T09:31:31.140Z,1538731891.140 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:31:31.140Z,1538731891.140 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-10-05T09:31:31.517Z,1538731891.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:31:31.518Z,1538731891.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:31:31.518Z,1538731891.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:31:31.519Z,1538731891.519 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:31:31.519Z,1538731891.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:31:31.519Z,1538731891.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:33:33.537Z,1538732013.537 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T09:33:47.974Z,1538732027.974 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T09:34:31.643Z,1538732071.643 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:34:31.643Z,1538732071.643 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-10-05T09:34:31.643Z,1538732071.643 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:34:31.649Z,1538732071.649 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:34:31.649Z,1538732071.649 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-10-05T09:34:31.649Z,1538732071.649 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:34:31.679Z,1538732071.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:34:31.679Z,1538732071.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:34:32.074Z,1538732072.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:34:32.074Z,1538732072.074 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-10-05T09:34:32.075Z,1538732072.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:34:32.075Z,1538732072.075 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-10-05T09:34:32.450Z,1538732072.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:34:32.450Z,1538732072.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:34:32.451Z,1538732072.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:34:32.451Z,1538732072.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:34:32.451Z,1538732072.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:34:32.452Z,1538732072.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:35:33.078Z,1538732133.078 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T09:35:33.079Z,1538732133.079 [Default:CheckIn:C.Wait] Stopped
2018-10-05T09:35:33.079Z,1538732133.079 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T09:35:33.079Z,1538732133.079 [Default:CheckIn:D] Running Loop=1
2018-10-05T09:35:33.505Z,1538732133.505 [Default:CheckIn:D] Stopped
2018-10-05T09:35:33.505Z,1538732133.505 [Default:CheckIn:E] Running Loop=1
2018-10-05T09:35:33.869Z,1538732133.869 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1759.095573 min 
2018-10-05T09:35:33.870Z,1538732133.870 [Default:CheckIn:E] Stopped
2018-10-05T09:35:33.870Z,1538732133.870 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T09:35:33.870Z,1538732133.870 [Default:CheckIn] Stopped
2018-10-05T09:35:33.870Z,1538732133.870 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T09:35:33.870Z,1538732133.870 [Default:CheckIn](INFO): Running loop #171
2018-10-05T09:35:33.871Z,1538732133.871 [Default:CheckIn] Running Loop=171
2018-10-05T09:35:33.871Z,1538732133.871 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T09:35:33.871Z,1538732133.871 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T09:37:32.576Z,1538732252.576 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:37:32.576Z,1538732252.576 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-10-05T09:37:32.576Z,1538732252.576 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:37:32.590Z,1538732252.590 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:37:32.590Z,1538732252.590 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-10-05T09:37:32.590Z,1538732252.590 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:37:32.608Z,1538732252.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:37:32.608Z,1538732252.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:37:32.974Z,1538732252.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:37:32.974Z,1538732252.974 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-10-05T09:37:32.975Z,1538732252.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:37:32.975Z,1538732252.975 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-10-05T09:37:33.319Z,1538732253.319 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T09:37:33.319Z,1538732253.319 [NAL9602] Data Fault, FailCount= 5
2018-10-05T09:37:33.319Z,1538732253.319 [NAL9602](ERROR): Data Fault
2018-10-05T09:37:33.379Z,1538732253.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:37:33.380Z,1538732253.380 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:37:33.380Z,1538732253.380 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:37:33.380Z,1538732253.380 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:37:33.389Z,1538732253.389 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:37:33.389Z,1538732253.389 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:37:33.410Z,1538732253.410 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T09:37:33.411Z,1538732253.411 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T09:37:33.719Z,1538732253.719 [NAL9602](INFO): Powering down
2018-10-05T09:37:33.784Z,1538732253.784 [CBIT](INFO): Critical error at 20181005T093733
2018-10-05T09:39:33.684Z,1538732373.684 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T09:39:33.684Z,1538732373.684 [NAL9602] No Fault, FailCount= 5
2018-10-05T09:39:34.003Z,1538732374.003 [NAL9602](INFO): Powering up NAL9602
2018-10-05T09:39:45.211Z,1538732385.211 [NAL9602](INFO): NAL9602 initialized
2018-10-05T09:40:35.842Z,1538732435.842 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:40:35.842Z,1538732435.842 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-10-05T09:40:35.842Z,1538732435.842 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:40:35.844Z,1538732435.844 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:40:35.844Z,1538732435.844 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-10-05T09:40:35.844Z,1538732435.844 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:40:35.847Z,1538732435.847 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T09:35:33.9Z
2018-10-05T09:40:35.847Z,1538732435.847 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T09:40:35.847Z,1538732435.847 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T09:40:35.860Z,1538732435.860 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:40:35.881Z,1538732435.881 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:40:36.031Z,1538732436.031 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:40:36.031Z,1538732436.031 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-10-05T09:40:36.032Z,1538732436.032 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:40:36.032Z,1538732436.032 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-10-05T09:40:36.576Z,1538732436.576 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20181004T041305/Courier0514.lzma
2018-10-05T09:40:36.623Z,1538732436.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:40:36.624Z,1538732436.624 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:40:36.624Z,1538732436.624 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:40:36.625Z,1538732436.625 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:40:36.625Z,1538732436.625 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:40:36.626Z,1538732436.626 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:40:37.114Z,1538732437.114 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0514.lzma.bak
2018-10-05T09:40:37.114Z,1538732437.114 [DataOverHttps](INFO): SBD MOMSN=8611608
2018-10-05T09:40:46.313Z,1538732446.313 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0515.lzma
2018-10-05T09:40:47.082Z,1538732447.082 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0515.lzma.bak
2018-10-05T09:40:47.082Z,1538732447.082 [DataOverHttps](INFO): SBD MOMSN=8611611
2018-10-05T09:40:48.040Z,1538732448.040 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T09:40:48.040Z,1538732448.040 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T09:40:48.040Z,1538732448.040 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T09:42:03.555Z,1538732523.555 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T09:43:36.964Z,1538732616.964 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:43:36.964Z,1538732616.964 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-10-05T09:43:36.964Z,1538732616.964 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:43:36.966Z,1538732616.966 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:43:36.966Z,1538732616.966 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-10-05T09:43:36.966Z,1538732616.966 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:43:36.996Z,1538732616.996 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:43:36.996Z,1538732616.996 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:43:37.356Z,1538732617.356 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:43:37.356Z,1538732617.356 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-10-05T09:43:37.357Z,1538732617.357 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:43:37.357Z,1538732617.357 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-10-05T09:43:37.726Z,1538732617.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:43:37.726Z,1538732617.726 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:43:37.727Z,1538732617.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:43:37.727Z,1538732617.727 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:43:37.727Z,1538732617.727 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:43:37.728Z,1538732617.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:44:59.188Z,1538732699.188 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.732, -0.001, 0.000
2018-10-05T09:45:48.466Z,1538732748.466 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T09:45:48.466Z,1538732748.466 [Default:CheckIn:C.Wait] Stopped
2018-10-05T09:45:48.466Z,1538732748.466 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T09:45:48.466Z,1538732748.466 [Default:CheckIn:D] Running Loop=1
2018-10-05T09:45:48.865Z,1538732748.865 [Default:CheckIn:D] Stopped
2018-10-05T09:45:48.865Z,1538732748.865 [Default:CheckIn:E] Running Loop=1
2018-10-05T09:45:49.297Z,1538732749.297 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1769.351562 min 
2018-10-05T09:45:49.298Z,1538732749.298 [Default:CheckIn:E] Stopped
2018-10-05T09:45:49.298Z,1538732749.298 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T09:45:49.298Z,1538732749.298 [Default:CheckIn] Stopped
2018-10-05T09:45:49.298Z,1538732749.298 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T09:45:49.298Z,1538732749.298 [Default:CheckIn](INFO): Running loop #172
2018-10-05T09:45:49.298Z,1538732749.298 [Default:CheckIn] Running Loop=172
2018-10-05T09:45:49.298Z,1538732749.298 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T09:45:49.299Z,1538732749.299 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T09:46:37.755Z,1538732797.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:46:37.755Z,1538732797.755 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-10-05T09:46:37.755Z,1538732797.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:46:37.761Z,1538732797.761 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:46:37.761Z,1538732797.761 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-10-05T09:46:37.761Z,1538732797.761 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:46:37.783Z,1538732797.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:46:37.783Z,1538732797.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:46:38.181Z,1538732798.181 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:46:38.181Z,1538732798.181 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-10-05T09:46:38.182Z,1538732798.182 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:46:38.182Z,1538732798.182 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-10-05T09:46:38.554Z,1538732798.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:46:38.555Z,1538732798.555 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:46:38.555Z,1538732798.555 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:46:38.555Z,1538732798.555 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:46:38.556Z,1538732798.556 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:46:38.556Z,1538732798.556 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:49:40.337Z,1538732980.337 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:49:40.337Z,1538732980.337 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-10-05T09:49:40.337Z,1538732980.337 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:49:40.339Z,1538732980.339 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:49:40.339Z,1538732980.339 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-10-05T09:49:40.339Z,1538732980.339 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:49:40.400Z,1538732980.400 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:49:40.400Z,1538732980.400 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:49:40.513Z,1538732980.513 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:49:40.514Z,1538732980.514 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-10-05T09:49:40.514Z,1538732980.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:49:40.514Z,1538732980.514 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-10-05T09:49:40.902Z,1538732980.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:49:40.902Z,1538732980.902 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:49:40.903Z,1538732980.903 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:49:40.903Z,1538732980.903 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:49:40.904Z,1538732980.904 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:49:40.904Z,1538732980.904 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:49:48.435Z,1538732988.435 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T09:49:48.435Z,1538732988.435 [NAL9602] Data Fault, FailCount= 1
2018-10-05T09:49:48.435Z,1538732988.435 [NAL9602](ERROR): Data Fault
2018-10-05T09:49:48.519Z,1538732988.519 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T09:49:48.835Z,1538732988.835 [NAL9602](INFO): Powering down
2018-10-05T09:49:49.700Z,1538732989.700 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T09:49:49.700Z,1538732989.700 [NAL9602] No Fault, FailCount= 1
2018-10-05T09:50:18.918Z,1538733018.918 [NAL9602](INFO): Powering up NAL9602
2018-10-05T09:50:29.719Z,1538733029.719 [NAL9602](INFO): NAL9602 initialized
2018-10-05T09:50:50.947Z,1538733050.947 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T09:45:49.3Z
2018-10-05T09:50:50.947Z,1538733050.947 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T09:50:50.947Z,1538733050.947 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T09:50:55.874Z,1538733055.874 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0517.lzma
2018-10-05T09:50:56.646Z,1538733056.646 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0517.lzma.bak
2018-10-05T09:50:56.647Z,1538733056.647 [DataOverHttps](INFO): SBD MOMSN=8611615
2018-10-05T09:51:05.785Z,1538733065.785 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20181004T041305/Express0518.lzma
2018-10-05T09:51:06.536Z,1538733066.536 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0518.lzma.bak
2018-10-05T09:51:06.537Z,1538733066.537 [DataOverHttps](INFO): SBD MOMSN=8611617
2018-10-05T09:51:07.476Z,1538733067.476 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T09:51:07.476Z,1538733067.476 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T09:51:07.476Z,1538733067.476 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T09:52:41.050Z,1538733161.050 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:52:41.050Z,1538733161.050 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-10-05T09:52:41.050Z,1538733161.050 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:52:41.054Z,1538733161.054 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:52:41.054Z,1538733161.054 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-10-05T09:52:41.055Z,1538733161.055 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:52:41.106Z,1538733161.106 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:52:41.107Z,1538733161.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:52:41.449Z,1538733161.449 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:52:41.449Z,1538733161.449 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-10-05T09:52:41.450Z,1538733161.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:52:41.450Z,1538733161.450 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-10-05T09:52:41.818Z,1538733161.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:52:41.818Z,1538733161.818 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:52:41.819Z,1538733161.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:52:41.819Z,1538733161.819 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:52:41.819Z,1538733161.819 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:52:41.820Z,1538733161.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:55:42.007Z,1538733342.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:55:42.007Z,1538733342.007 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-10-05T09:55:42.007Z,1538733342.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:55:42.009Z,1538733342.009 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:55:42.009Z,1538733342.009 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-10-05T09:55:42.009Z,1538733342.009 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:55:42.022Z,1538733342.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:55:42.022Z,1538733342.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:55:42.419Z,1538733342.419 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:55:42.419Z,1538733342.419 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-10-05T09:55:42.420Z,1538733342.420 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:55:42.420Z,1538733342.420 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-10-05T09:55:42.779Z,1538733342.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:55:42.779Z,1538733342.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:55:42.780Z,1538733342.780 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:55:42.780Z,1538733342.780 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:55:42.781Z,1538733342.781 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:55:42.781Z,1538733342.781 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:56:07.720Z,1538733367.720 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T09:56:07.722Z,1538733367.722 [Default:CheckIn:C.Wait] Stopped
2018-10-05T09:56:07.722Z,1538733367.722 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T09:56:07.722Z,1538733367.722 [Default:CheckIn:D] Running Loop=1
2018-10-05T09:56:08.141Z,1538733368.141 [Default:CheckIn:D] Stopped
2018-10-05T09:56:08.141Z,1538733368.141 [Default:CheckIn:E] Running Loop=1
2018-10-05T09:56:08.506Z,1538733368.506 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1779.672786 min 
2018-10-05T09:56:08.506Z,1538733368.506 [Default:CheckIn:E] Stopped
2018-10-05T09:56:08.506Z,1538733368.506 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T09:56:08.506Z,1538733368.506 [Default:CheckIn] Stopped
2018-10-05T09:56:08.506Z,1538733368.506 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T09:56:08.507Z,1538733368.507 [Default:CheckIn](INFO): Running loop #173
2018-10-05T09:56:08.507Z,1538733368.507 [Default:CheckIn] Running Loop=173
2018-10-05T09:56:08.507Z,1538733368.507 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T09:56:08.507Z,1538733368.507 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T09:57:34.907Z,1538733454.907 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.887, -0.005, 0.000
2018-10-05T09:58:43.123Z,1538733523.123 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:58:43.131Z,1538733523.131 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-10-05T09:58:43.131Z,1538733523.131 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T09:58:43.133Z,1538733523.133 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T09:58:43.133Z,1538733523.133 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-10-05T09:58:43.133Z,1538733523.133 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T09:58:43.165Z,1538733523.165 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T09:58:43.166Z,1538733523.166 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T09:58:43.578Z,1538733523.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T09:58:43.578Z,1538733523.578 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-10-05T09:58:43.579Z,1538733523.579 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T09:58:43.579Z,1538733523.579 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-10-05T09:58:43.957Z,1538733523.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T09:58:43.958Z,1538733523.958 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:58:43.958Z,1538733523.958 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:58:43.959Z,1538733523.959 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T09:58:43.959Z,1538733523.959 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T09:58:43.959Z,1538733523.959 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T09:58:51.226Z,1538733531.226 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe, 15.860, -0.009, 0.000
2018-10-05T10:00:32.263Z,1538733632.263 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T10:00:32.263Z,1538733632.263 [NAL9602] Data Fault, FailCount= 2
2018-10-05T10:00:32.263Z,1538733632.263 [NAL9602](ERROR): Data Fault
2018-10-05T10:00:32.348Z,1538733632.348 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T10:00:32.671Z,1538733632.671 [NAL9602](INFO): Powering down
2018-10-05T10:00:36.124Z,1538733636.124 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T10:00:36.124Z,1538733636.124 [NAL9602] No Fault, FailCount= 2
2018-10-05T10:01:02.847Z,1538733662.847 [NAL9602](INFO): Powering up NAL9602
2018-10-05T10:01:11.298Z,1538733671.298 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T09:56:08.5Z
2018-10-05T10:01:11.298Z,1538733671.298 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T10:01:11.298Z,1538733671.298 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T10:01:16.244Z,1538733676.244 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0520.lzma
2018-10-05T10:01:16.252Z,1538733676.252 [NAL9602](INFO): NAL9602 initialized
2018-10-05T10:01:17.018Z,1538733677.018 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0520.lzma.bak
2018-10-05T10:01:17.019Z,1538733677.019 [DataOverHttps](INFO): SBD MOMSN=8611621
2018-10-05T10:01:29.138Z,1538733689.138 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0521.lzma
2018-10-05T10:01:29.923Z,1538733689.923 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0521.lzma.bak
2018-10-05T10:01:29.923Z,1538733689.923 [DataOverHttps](INFO): SBD MOMSN=8611623
2018-10-05T10:01:30.892Z,1538733690.892 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T10:01:30.892Z,1538733690.892 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T10:01:30.892Z,1538733690.892 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T10:01:44.090Z,1538733704.090 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:01:44.090Z,1538733704.090 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-10-05T10:01:44.090Z,1538733704.090 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:01:44.119Z,1538733704.119 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:01:44.120Z,1538733704.120 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-10-05T10:01:44.120Z,1538733704.120 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:01:44.169Z,1538733704.169 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:01:44.170Z,1538733704.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:01:44.350Z,1538733704.350 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:01:44.350Z,1538733704.350 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-10-05T10:01:44.351Z,1538733704.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:01:44.351Z,1538733704.351 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-10-05T10:01:44.746Z,1538733704.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:01:44.746Z,1538733704.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:01:44.747Z,1538733704.747 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:01:44.747Z,1538733704.747 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:01:44.747Z,1538733704.747 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:01:44.748Z,1538733704.748 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:04:44.968Z,1538733884.968 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:04:44.968Z,1538733884.968 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-10-05T10:04:44.968Z,1538733884.968 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:04:44.970Z,1538733884.970 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:04:44.970Z,1538733884.970 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-10-05T10:04:44.970Z,1538733884.970 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:04:45.007Z,1538733885.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:04:45.007Z,1538733885.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:04:45.386Z,1538733885.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:04:45.386Z,1538733885.386 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-10-05T10:04:45.387Z,1538733885.387 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:04:45.387Z,1538733885.387 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-10-05T10:04:45.766Z,1538733885.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:04:45.766Z,1538733885.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:04:45.767Z,1538733885.767 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:04:45.767Z,1538733885.767 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:04:45.768Z,1538733885.768 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:04:45.768Z,1538733885.768 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:06:31.247Z,1538733991.247 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T10:06:31.247Z,1538733991.247 [Default:CheckIn:C.Wait] Stopped
2018-10-05T10:06:31.247Z,1538733991.247 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T10:06:31.247Z,1538733991.247 [Default:CheckIn:D] Running Loop=1
2018-10-05T10:06:31.640Z,1538733991.640 [Default:CheckIn:D] Stopped
2018-10-05T10:06:31.640Z,1538733991.640 [Default:CheckIn:E] Running Loop=1
2018-10-05T10:06:32.039Z,1538733992.039 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1790.064583 min 
2018-10-05T10:06:32.039Z,1538733992.039 [Default:CheckIn:E] Stopped
2018-10-05T10:06:32.039Z,1538733992.039 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T10:06:32.039Z,1538733992.039 [Default:CheckIn] Stopped
2018-10-05T10:06:32.039Z,1538733992.039 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T10:06:32.040Z,1538733992.040 [Default:CheckIn](INFO): Running loop #174
2018-10-05T10:06:32.040Z,1538733992.040 [Default:CheckIn] Running Loop=174
2018-10-05T10:06:32.040Z,1538733992.040 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T10:06:32.040Z,1538733992.040 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T10:07:45.784Z,1538734065.784 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:07:45.784Z,1538734065.784 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-10-05T10:07:45.784Z,1538734065.784 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:07:45.786Z,1538734065.786 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:07:45.786Z,1538734065.786 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-10-05T10:07:45.786Z,1538734065.786 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:07:45.800Z,1538734065.800 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:07:45.800Z,1538734065.800 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:07:46.214Z,1538734066.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:07:46.214Z,1538734066.214 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-10-05T10:07:46.214Z,1538734066.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:07:46.214Z,1538734066.214 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-10-05T10:07:46.570Z,1538734066.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:07:46.570Z,1538734066.570 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:07:46.571Z,1538734066.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:07:46.571Z,1538734066.571 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:07:46.571Z,1538734066.571 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:07:46.572Z,1538734066.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:10:46.719Z,1538734246.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:10:46.719Z,1538734246.719 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-10-05T10:10:46.719Z,1538734246.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:10:46.721Z,1538734246.721 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:10:46.721Z,1538734246.721 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-10-05T10:10:46.721Z,1538734246.721 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:10:46.751Z,1538734246.751 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:10:46.751Z,1538734246.751 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:10:47.168Z,1538734247.168 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:10:47.168Z,1538734247.168 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-10-05T10:10:47.168Z,1538734247.168 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:10:47.169Z,1538734247.169 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-10-05T10:10:47.558Z,1538734247.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:10:47.558Z,1538734247.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:10:47.558Z,1538734247.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:10:47.559Z,1538734247.559 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:10:47.559Z,1538734247.559 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:10:47.560Z,1538734247.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:11:17.175Z,1538734277.175 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T10:11:17.175Z,1538734277.175 [NAL9602] Data Fault, FailCount= 3
2018-10-05T10:11:17.175Z,1538734277.175 [NAL9602](ERROR): Data Fault
2018-10-05T10:11:17.258Z,1538734277.258 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T10:11:17.571Z,1538734277.571 [NAL9602](INFO): Powering down
2018-10-05T10:11:18.448Z,1538734278.448 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T10:11:18.448Z,1538734278.448 [NAL9602] No Fault, FailCount= 3
2018-10-05T10:11:35.311Z,1538734295.311 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T10:06:32.0Z
2018-10-05T10:11:35.311Z,1538734295.311 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T10:11:35.312Z,1538734295.312 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T10:11:43.323Z,1538734303.323 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0523.lzma
2018-10-05T10:11:44.802Z,1538734304.802 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0523.lzma.bak
2018-10-05T10:11:44.802Z,1538734304.802 [DataOverHttps](INFO): SBD MOMSN=8611627
2018-10-05T10:11:48.931Z,1538734308.931 [NAL9602](INFO): Powering up NAL9602
2018-10-05T10:11:53.970Z,1538734313.970 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0524.lzma
2018-10-05T10:11:54.745Z,1538734314.745 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0524.lzma.bak
2018-10-05T10:11:54.746Z,1538734314.746 [DataOverHttps](INFO): SBD MOMSN=8611629
2018-10-05T10:11:55.666Z,1538734315.666 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-05T10:11:55.695Z,1538734315.695 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T10:11:55.695Z,1538734315.695 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T10:11:55.695Z,1538734315.695 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T10:11:59.799Z,1538734319.799 [NAL9602](INFO): NAL9602 initialized
2018-10-05T10:13:47.763Z,1538734427.763 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:13:47.763Z,1538734427.763 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-10-05T10:13:47.763Z,1538734427.763 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:13:47.765Z,1538734427.765 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:13:47.765Z,1538734427.765 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-10-05T10:13:47.765Z,1538734427.765 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:13:47.779Z,1538734427.779 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:13:47.779Z,1538734427.779 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:13:48.209Z,1538734428.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:13:48.209Z,1538734428.209 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-10-05T10:13:48.209Z,1538734428.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:13:48.210Z,1538734428.210 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-10-05T10:13:48.575Z,1538734428.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:13:48.576Z,1538734428.576 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:13:48.576Z,1538734428.576 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:13:48.576Z,1538734428.576 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:13:48.577Z,1538734428.577 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:13:48.577Z,1538734428.577 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:14:45.108Z,1538734485.108 [CBIT](IMPORTANT): Beginning ground fault scan
2018-10-05T10:14:58.916Z,1538734498.916 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.126884
CHAN A1 (24V): 0.003516
CHAN A2 (12V): -0.007338
CHAN A3 (5V): -0.002272
CHAN B0 (3.3V): 0.000123
CHAN B1 (3.15aV): 0.000107
CHAN B2 (3.15bV): 0.000090
CHAN B3 (GND): 0.001965
OPEN: 0.004874
Full Scale Calc: 4.765 mA, -1.589 mA
2018-10-05T10:16:48.685Z,1538734608.685 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:16:48.685Z,1538734608.685 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-10-05T10:16:48.685Z,1538734608.685 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:16:48.687Z,1538734608.687 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:16:48.687Z,1538734608.687 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-10-05T10:16:48.687Z,1538734608.687 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:16:48.717Z,1538734608.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:16:48.717Z,1538734608.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:16:49.131Z,1538734609.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:16:49.131Z,1538734609.131 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-10-05T10:16:49.131Z,1538734609.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:16:49.132Z,1538734609.132 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-10-05T10:16:49.491Z,1538734609.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:16:49.491Z,1538734609.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:16:49.492Z,1538734609.492 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:16:49.492Z,1538734609.492 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:16:49.493Z,1538734609.493 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:16:49.493Z,1538734609.493 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:16:55.925Z,1538734615.925 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T10:16:55.926Z,1538734615.926 [Default:CheckIn:C.Wait] Stopped
2018-10-05T10:16:55.926Z,1538734615.926 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T10:16:55.926Z,1538734615.926 [Default:CheckIn:D] Running Loop=1
2018-10-05T10:16:56.280Z,1538734616.280 [Default:CheckIn:D] Stopped
2018-10-05T10:16:56.280Z,1538734616.280 [Default:CheckIn:E] Running Loop=1
2018-10-05T10:16:56.685Z,1538734616.685 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1800.475130 min 
2018-10-05T10:16:56.685Z,1538734616.685 [Default:CheckIn:E] Stopped
2018-10-05T10:16:56.685Z,1538734616.685 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T10:16:56.685Z,1538734616.685 [Default:CheckIn] Stopped
2018-10-05T10:16:56.685Z,1538734616.685 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T10:16:56.686Z,1538734616.686 [Default:CheckIn](INFO): Running loop #175
2018-10-05T10:16:56.686Z,1538734616.686 [Default:CheckIn] Running Loop=175
2018-10-05T10:16:56.686Z,1538734616.686 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T10:16:56.686Z,1538734616.686 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T10:19:49.499Z,1538734789.499 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:19:49.500Z,1538734789.500 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-10-05T10:19:49.500Z,1538734789.500 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:19:49.506Z,1538734789.506 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:19:49.506Z,1538734789.506 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-10-05T10:19:49.506Z,1538734789.506 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:19:49.532Z,1538734789.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:19:49.537Z,1538734789.537 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:19:49.931Z,1538734789.931 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:19:49.931Z,1538734789.931 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-10-05T10:19:49.931Z,1538734789.931 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:19:49.931Z,1538734789.931 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-10-05T10:19:50.314Z,1538734790.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:19:50.315Z,1538734790.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:19:50.315Z,1538734790.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:19:50.316Z,1538734790.316 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:19:50.316Z,1538734790.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:19:50.316Z,1538734790.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:21:09.248Z,1538734869.248 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T10:21:09.248Z,1538734869.248 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-3276,V
2018-10-05T10:21:59.156Z,1538734919.156 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T10:16:56.7Z
2018-10-05T10:21:59.156Z,1538734919.156 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T10:21:59.156Z,1538734919.156 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T10:22:04.508Z,1538734924.508 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0526.lzma
2018-10-05T10:22:04.903Z,1538734924.903 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T10:22:04.903Z,1538734924.903 [NAL9602] Data Fault, FailCount= 4
2018-10-05T10:22:04.903Z,1538734924.903 [NAL9602](ERROR): Data Fault
2018-10-05T10:22:04.993Z,1538734924.993 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T10:22:05.294Z,1538734925.294 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0526.lzma.bak
2018-10-05T10:22:05.294Z,1538734925.294 [DataOverHttps](INFO): SBD MOMSN=8611633
2018-10-05T10:22:05.300Z,1538734925.300 [NAL9602](INFO): Powering down
2018-10-05T10:22:06.396Z,1538734926.396 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T10:22:06.396Z,1538734926.396 [NAL9602] No Fault, FailCount= 4
2018-10-05T10:22:15.745Z,1538734935.745 [DataOverHttps](INFO): Sending 286 bytes from file Logs/20181004T041305/Express0527.lzma
2018-10-05T10:22:16.513Z,1538734936.513 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0527.lzma.bak
2018-10-05T10:22:16.514Z,1538734936.514 [DataOverHttps](INFO): SBD MOMSN=8611635
2018-10-05T10:22:17.463Z,1538734937.463 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T10:22:17.464Z,1538734937.464 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T10:22:17.464Z,1538734937.464 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T10:22:35.547Z,1538734955.547 [NAL9602](INFO): Powering up NAL9602
2018-10-05T10:22:46.747Z,1538734966.747 [NAL9602](INFO): NAL9602 initialized
2018-10-05T10:22:50.403Z,1538734970.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:22:50.403Z,1538734970.403 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-10-05T10:22:50.403Z,1538734970.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:22:50.410Z,1538734970.410 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:22:50.410Z,1538734970.410 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-10-05T10:22:50.410Z,1538734970.410 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:22:50.427Z,1538734970.427 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:22:50.428Z,1538734970.428 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:22:50.825Z,1538734970.825 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:22:50.825Z,1538734970.825 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-10-05T10:22:50.826Z,1538734970.826 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:22:50.826Z,1538734970.826 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-10-05T10:22:51.207Z,1538734971.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:22:51.207Z,1538734971.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:22:51.207Z,1538734971.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:22:51.208Z,1538734971.208 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:22:51.208Z,1538734971.208 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:22:51.213Z,1538734971.213 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:23:42.577Z,1538735022.577 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T10:23:42.577Z,1538735022.577 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100503280, -0.1,   0.0,1448.9,  0
2018-10-05T10:25:52.772Z,1538735152.772 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:25:52.773Z,1538735152.773 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-10-05T10:25:52.773Z,1538735152.773 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:25:52.775Z,1538735152.775 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:25:52.775Z,1538735152.775 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-10-05T10:25:52.775Z,1538735152.775 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:25:52.788Z,1538735152.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:25:52.788Z,1538735152.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:25:52.923Z,1538735152.923 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:25:52.923Z,1538735152.923 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-10-05T10:25:52.923Z,1538735152.923 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:25:52.924Z,1538735152.924 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-10-05T10:25:53.280Z,1538735153.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:25:53.281Z,1538735153.281 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:25:53.281Z,1538735153.281 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:25:53.282Z,1538735153.282 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:25:53.282Z,1538735153.282 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:25:53.282Z,1538735153.282 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:27:17.604Z,1538735237.604 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T10:27:17.604Z,1538735237.604 [Default:CheckIn:C.Wait] Stopped
2018-10-05T10:27:17.605Z,1538735237.605 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T10:27:17.609Z,1538735237.609 [Default:CheckIn:D] Running Loop=1
2018-10-05T10:27:18.011Z,1538735238.011 [Default:CheckIn:D] Stopped
2018-10-05T10:27:18.011Z,1538735238.011 [Default:CheckIn:E] Running Loop=1
2018-10-05T10:27:18.409Z,1538735238.409 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1810.837370 min 
2018-10-05T10:27:18.410Z,1538735238.410 [Default:CheckIn:E] Stopped
2018-10-05T10:27:18.410Z,1538735238.410 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T10:27:18.410Z,1538735238.410 [Default:CheckIn] Stopped
2018-10-05T10:27:18.410Z,1538735238.410 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T10:27:18.410Z,1538735238.410 [Default:CheckIn](INFO): Running loop #176
2018-10-05T10:27:18.410Z,1538735238.410 [Default:CheckIn] Running Loop=176
2018-10-05T10:27:18.410Z,1538735238.410 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T10:27:18.411Z,1538735238.411 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T10:28:53.523Z,1538735333.523 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:28:53.523Z,1538735333.523 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-10-05T10:28:53.523Z,1538735333.523 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:28:53.530Z,1538735333.530 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:28:53.530Z,1538735333.530 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-10-05T10:28:53.530Z,1538735333.530 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:28:53.547Z,1538735333.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:28:53.548Z,1538735333.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:28:53.944Z,1538735333.944 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:28:53.944Z,1538735333.944 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-10-05T10:28:53.945Z,1538735333.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:28:53.945Z,1538735333.945 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-10-05T10:28:54.301Z,1538735334.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:28:54.302Z,1538735334.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:28:54.302Z,1538735334.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:28:54.303Z,1538735334.303 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:28:54.303Z,1538735334.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:28:54.303Z,1538735334.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:31:54.403Z,1538735514.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:31:54.403Z,1538735514.403 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2018-10-05T10:31:54.403Z,1538735514.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:31:54.409Z,1538735514.409 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:31:54.409Z,1538735514.409 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2018-10-05T10:31:54.410Z,1538735514.410 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:31:54.435Z,1538735514.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:31:54.435Z,1538735514.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:31:54.857Z,1538735514.857 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:31:54.857Z,1538735514.857 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2018-10-05T10:31:54.857Z,1538735514.857 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:31:54.858Z,1538735514.858 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2018-10-05T10:31:55.216Z,1538735515.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:31:55.216Z,1538735515.217 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:31:55.221Z,1538735515.221 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:31:55.221Z,1538735515.221 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:31:55.222Z,1538735515.222 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:31:55.222Z,1538735515.222 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:32:20.795Z,1538735540.795 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T10:27:18.4Z
2018-10-05T10:32:20.795Z,1538735540.795 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T10:32:20.795Z,1538735540.795 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T10:32:25.836Z,1538735545.836 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0529.lzma
2018-10-05T10:32:26.598Z,1538735546.598 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0529.lzma.bak
2018-10-05T10:32:26.598Z,1538735546.598 [DataOverHttps](INFO): SBD MOMSN=8611640
2018-10-05T10:32:35.761Z,1538735555.761 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0530.lzma
2018-10-05T10:32:36.541Z,1538735556.541 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0530.lzma.bak
2018-10-05T10:32:36.542Z,1538735556.542 [DataOverHttps](INFO): SBD MOMSN=8611642
2018-10-05T10:32:37.485Z,1538735557.485 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T10:32:37.485Z,1538735557.485 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T10:32:37.485Z,1538735557.485 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T10:32:49.347Z,1538735569.347 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T10:32:49.347Z,1538735569.347 [NAL9602] Data Fault, FailCount= 5
2018-10-05T10:32:49.347Z,1538735569.347 [NAL9602](ERROR): Data Fault
2018-10-05T10:32:49.404Z,1538735569.404 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T10:32:49.410Z,1538735569.410 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T10:32:49.747Z,1538735569.747 [NAL9602](INFO): Powering down
2018-10-05T10:32:49.826Z,1538735569.826 [CBIT](INFO): Critical error at 20181005T103249
2018-10-05T10:34:49.476Z,1538735689.476 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T10:34:49.476Z,1538735689.476 [NAL9602] No Fault, FailCount= 5
2018-10-05T10:34:49.811Z,1538735689.811 [NAL9602](INFO): Powering up NAL9602
2018-10-05T10:34:55.451Z,1538735695.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:34:55.451Z,1538735695.451 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2018-10-05T10:34:55.451Z,1538735695.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:34:55.457Z,1538735695.457 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:34:55.458Z,1538735695.458 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2018-10-05T10:34:55.458Z,1538735695.458 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:34:55.479Z,1538735695.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:34:55.479Z,1538735695.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:34:55.909Z,1538735695.909 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:34:55.909Z,1538735695.909 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2018-10-05T10:34:55.910Z,1538735695.910 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:34:55.910Z,1538735695.910 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2018-10-05T10:34:56.254Z,1538735696.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:34:56.255Z,1538735696.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:34:56.255Z,1538735696.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:34:56.255Z,1538735696.255 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:34:56.256Z,1538735696.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:34:56.256Z,1538735696.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:35:02.287Z,1538735702.287 [NAL9602](INFO): NAL9602 initialized
2018-10-05T10:37:37.940Z,1538735857.940 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T10:37:37.940Z,1538735857.940 [Default:CheckIn:C.Wait] Stopped
2018-10-05T10:37:37.940Z,1538735857.940 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T10:37:37.940Z,1538735857.940 [Default:CheckIn:D] Running Loop=1
2018-10-05T10:37:38.325Z,1538735858.325 [Default:CheckIn:D] Stopped
2018-10-05T10:37:38.325Z,1538735858.325 [Default:CheckIn:E] Running Loop=1
2018-10-05T10:37:38.725Z,1538735858.726 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1821.175911 min 
2018-10-05T10:37:38.726Z,1538735858.726 [Default:CheckIn:E] Stopped
2018-10-05T10:37:38.726Z,1538735858.726 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T10:37:38.726Z,1538735858.726 [Default:CheckIn] Stopped
2018-10-05T10:37:38.726Z,1538735858.726 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T10:37:38.726Z,1538735858.726 [Default:CheckIn](INFO): Running loop #177
2018-10-05T10:37:38.727Z,1538735858.727 [Default:CheckIn] Running Loop=177
2018-10-05T10:37:38.727Z,1538735858.727 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T10:37:38.727Z,1538735858.727 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T10:37:58.518Z,1538735878.518 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:37:58.518Z,1538735878.518 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2018-10-05T10:37:58.518Z,1538735878.518 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:37:58.520Z,1538735878.520 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:37:58.520Z,1538735878.520 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2018-10-05T10:37:58.520Z,1538735878.520 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:37:58.574Z,1538735878.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:37:58.574Z,1538735878.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:37:58.718Z,1538735878.718 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:37:58.718Z,1538735878.718 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2018-10-05T10:37:58.719Z,1538735878.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:37:58.719Z,1538735878.719 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2018-10-05T10:37:59.063Z,1538735879.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:37:59.063Z,1538735879.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:37:59.064Z,1538735879.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:37:59.064Z,1538735879.064 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:37:59.064Z,1538735879.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:37:59.065Z,1538735879.065 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:40:59.371Z,1538736059.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:40:59.371Z,1538736059.371 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2018-10-05T10:40:59.371Z,1538736059.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:40:59.377Z,1538736059.377 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:40:59.378Z,1538736059.378 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2018-10-05T10:40:59.378Z,1538736059.378 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:40:59.402Z,1538736059.402 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:40:59.402Z,1538736059.402 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:40:59.802Z,1538736059.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:40:59.802Z,1538736059.802 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2018-10-05T10:40:59.803Z,1538736059.803 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:40:59.803Z,1538736059.803 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2018-10-05T10:41:00.210Z,1538736060.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:41:00.211Z,1538736060.211 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:41:00.211Z,1538736060.211 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:41:00.211Z,1538736060.211 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:41:00.212Z,1538736060.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:41:00.212Z,1538736060.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:41:20.221Z,1538736080.221 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T10:42:40.324Z,1538736160.324 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T10:37:38.7Z
2018-10-05T10:42:40.324Z,1538736160.324 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T10:42:40.324Z,1538736160.324 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T10:42:45.255Z,1538736165.255 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20181004T041305/Courier0532.lzma
2018-10-05T10:42:46.030Z,1538736166.030 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0532.lzma.bak
2018-10-05T10:42:46.030Z,1538736166.030 [DataOverHttps](INFO): SBD MOMSN=8611646
2018-10-05T10:42:55.241Z,1538736175.241 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0533.lzma
2018-10-05T10:42:56.037Z,1538736176.037 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0533.lzma.bak
2018-10-05T10:42:56.038Z,1538736176.038 [DataOverHttps](INFO): SBD MOMSN=8611649
2018-10-05T10:42:57.026Z,1538736177.026 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T10:42:57.026Z,1538736177.026 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T10:42:57.026Z,1538736177.026 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T10:44:00.503Z,1538736240.503 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:44:00.503Z,1538736240.503 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2018-10-05T10:44:00.503Z,1538736240.503 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:44:00.505Z,1538736240.505 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:44:00.505Z,1538736240.505 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2018-10-05T10:44:00.505Z,1538736240.505 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:44:00.518Z,1538736240.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:44:00.519Z,1538736240.519 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:44:00.915Z,1538736240.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:44:00.915Z,1538736240.915 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2018-10-05T10:44:00.916Z,1538736240.916 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:44:00.916Z,1538736240.916 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2018-10-05T10:44:01.297Z,1538736241.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:44:01.297Z,1538736241.297 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:44:01.298Z,1538736241.298 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:44:01.298Z,1538736241.298 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:44:01.299Z,1538736241.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:44:01.299Z,1538736241.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:45:03.459Z,1538736303.459 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T10:45:03.459Z,1538736303.459 [NAL9602] Data Fault, FailCount= 1
2018-10-05T10:45:03.459Z,1538736303.459 [NAL9602](ERROR): Data Fault
2018-10-05T10:45:03.543Z,1538736303.543 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T10:45:03.859Z,1538736303.859 [NAL9602](INFO): Powering down
2018-10-05T10:45:04.715Z,1538736304.715 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T10:45:04.715Z,1538736304.715 [NAL9602] No Fault, FailCount= 1
2018-10-05T10:45:33.899Z,1538736333.899 [NAL9602](INFO): Powering up NAL9602
2018-10-05T10:45:44.699Z,1538736344.699 [NAL9602](INFO): NAL9602 initialized
2018-10-05T10:47:01.571Z,1538736421.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:47:01.571Z,1538736421.571 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2018-10-05T10:47:01.571Z,1538736421.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:47:01.577Z,1538736421.577 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:47:01.577Z,1538736421.577 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2018-10-05T10:47:01.577Z,1538736421.577 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:47:01.596Z,1538736421.596 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:47:01.596Z,1538736421.596 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:47:01.983Z,1538736421.983 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:47:01.983Z,1538736421.983 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2018-10-05T10:47:01.984Z,1538736421.984 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:47:01.984Z,1538736421.984 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2018-10-05T10:47:02.377Z,1538736422.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:47:02.378Z,1538736422.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:47:02.378Z,1538736422.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:47:02.378Z,1538736422.378 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:47:02.379Z,1538736422.379 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:47:02.379Z,1538736422.379 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:47:57.336Z,1538736477.336 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T10:47:57.337Z,1538736477.337 [Default:CheckIn:C.Wait] Stopped
2018-10-05T10:47:57.337Z,1538736477.337 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T10:47:57.337Z,1538736477.337 [Default:CheckIn:D] Running Loop=1
2018-10-05T10:47:57.726Z,1538736477.726 [Default:CheckIn:D] Stopped
2018-10-05T10:47:57.726Z,1538736477.726 [Default:CheckIn:E] Running Loop=1
2018-10-05T10:47:58.137Z,1538736478.137 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1831.499349 min 
2018-10-05T10:47:58.137Z,1538736478.137 [Default:CheckIn:E] Stopped
2018-10-05T10:47:58.138Z,1538736478.138 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T10:47:58.138Z,1538736478.138 [Default:CheckIn] Stopped
2018-10-05T10:47:58.138Z,1538736478.138 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T10:47:58.138Z,1538736478.138 [Default:CheckIn](INFO): Running loop #178
2018-10-05T10:47:58.138Z,1538736478.138 [Default:CheckIn] Running Loop=178
2018-10-05T10:47:58.138Z,1538736478.138 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T10:47:58.138Z,1538736478.138 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T10:50:03.953Z,1538736603.953 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:50:03.969Z,1538736603.969 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2018-10-05T10:50:03.969Z,1538736603.969 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:50:03.971Z,1538736603.971 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:50:03.971Z,1538736603.971 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2018-10-05T10:50:03.971Z,1538736603.971 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:50:04.005Z,1538736604.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:50:04.006Z,1538736604.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:50:04.123Z,1538736604.123 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:50:04.123Z,1538736604.123 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2018-10-05T10:50:04.124Z,1538736604.124 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:50:04.124Z,1538736604.124 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2018-10-05T10:50:04.485Z,1538736604.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:50:04.486Z,1538736604.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:50:04.486Z,1538736604.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:50:04.487Z,1538736604.487 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:50:04.487Z,1538736604.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:50:04.487Z,1538736604.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:52:33.845Z,1538736753.845 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T10:52:33.852Z,1538736753.852 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,     ,        +0.00,   0.00,13921.73
2018-10-05T10:53:00.243Z,1538736780.243 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T10:47:58.1Z
2018-10-05T10:53:00.243Z,1538736780.243 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T10:53:00.243Z,1538736780.243 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T10:53:05.122Z,1538736785.122 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:53:05.123Z,1538736785.123 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2018-10-05T10:53:05.123Z,1538736785.123 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:53:05.124Z,1538736785.124 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:53:05.124Z,1538736785.124 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2018-10-05T10:53:05.125Z,1538736785.125 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:53:05.139Z,1538736785.139 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:53:05.140Z,1538736785.140 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:53:05.180Z,1538736785.180 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0535.lzma
2018-10-05T10:53:05.267Z,1538736785.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:53:05.267Z,1538736785.267 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2018-10-05T10:53:05.267Z,1538736785.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:53:05.267Z,1538736785.267 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2018-10-05T10:53:05.606Z,1538736785.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:53:05.606Z,1538736785.606 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:53:05.607Z,1538736785.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:53:05.607Z,1538736785.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:53:05.607Z,1538736785.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:53:05.608Z,1538736785.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:53:05.958Z,1538736785.958 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0535.lzma.bak
2018-10-05T10:53:05.958Z,1538736785.958 [DataOverHttps](INFO): SBD MOMSN=8611653
2018-10-05T10:53:15.802Z,1538736795.802 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0536.lzma
2018-10-05T10:53:16.582Z,1538736796.582 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0536.lzma.bak
2018-10-05T10:53:16.582Z,1538736796.582 [DataOverHttps](INFO): SBD MOMSN=8611655
2018-10-05T10:53:17.570Z,1538736797.570 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T10:53:17.570Z,1538736797.570 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T10:53:17.570Z,1538736797.570 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T10:55:45.605Z,1538736945.605 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T10:55:45.606Z,1538736945.606 [NAL9602] Data Fault, FailCount= 2
2018-10-05T10:55:45.606Z,1538736945.606 [NAL9602](ERROR): Data Fault
2018-10-05T10:55:45.664Z,1538736945.664 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T10:55:46.011Z,1538736946.011 [NAL9602](INFO): Powering down
2018-10-05T10:55:46.880Z,1538736946.880 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T10:55:46.880Z,1538736946.880 [NAL9602] No Fault, FailCount= 2
2018-10-05T10:56:05.636Z,1538736965.636 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:56:05.636Z,1538736965.636 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2018-10-05T10:56:05.636Z,1538736965.636 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:56:05.638Z,1538736965.638 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:56:05.638Z,1538736965.638 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2018-10-05T10:56:05.638Z,1538736965.638 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:56:05.672Z,1538736965.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:56:05.672Z,1538736965.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:56:06.078Z,1538736966.078 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:56:06.078Z,1538736966.078 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2018-10-05T10:56:06.079Z,1538736966.079 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:56:06.079Z,1538736966.079 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2018-10-05T10:56:06.450Z,1538736966.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:56:06.450Z,1538736966.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:56:06.451Z,1538736966.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:56:06.451Z,1538736966.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:56:06.451Z,1538736966.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:56:06.452Z,1538736966.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:56:20.646Z,1538736980.646 [NAL9602](INFO): Powering up NAL9602
2018-10-05T10:56:31.695Z,1538736991.695 [NAL9602](INFO): NAL9602 initialized
2018-10-05T10:58:17.707Z,1538737097.707 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T10:58:17.707Z,1538737097.707 [Default:CheckIn:C.Wait] Stopped
2018-10-05T10:58:17.707Z,1538737097.707 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T10:58:17.707Z,1538737097.707 [Default:CheckIn:D] Running Loop=1
2018-10-05T10:58:18.121Z,1538737098.121 [Default:CheckIn:D] Stopped
2018-10-05T10:58:18.121Z,1538737098.121 [Default:CheckIn:E] Running Loop=1
2018-10-05T10:58:18.505Z,1538737098.505 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1841.839193 min 
2018-10-05T10:58:18.505Z,1538737098.505 [Default:CheckIn:E] Stopped
2018-10-05T10:58:18.505Z,1538737098.505 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T10:58:18.505Z,1538737098.505 [Default:CheckIn] Stopped
2018-10-05T10:58:18.506Z,1538737098.506 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T10:58:18.506Z,1538737098.506 [Default:CheckIn](INFO): Running loop #179
2018-10-05T10:58:18.506Z,1538737098.506 [Default:CheckIn] Running Loop=179
2018-10-05T10:58:18.506Z,1538737098.506 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T10:58:18.506Z,1538737098.506 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T10:59:06.581Z,1538737146.581 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:59:06.581Z,1538737146.581 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2018-10-05T10:59:06.581Z,1538737146.581 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T10:59:06.583Z,1538737146.583 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T10:59:06.583Z,1538737146.583 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2018-10-05T10:59:06.583Z,1538737146.583 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T10:59:06.596Z,1538737146.596 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T10:59:06.597Z,1538737146.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T10:59:07.018Z,1538737147.018 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T10:59:07.018Z,1538737147.018 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2018-10-05T10:59:07.019Z,1538737147.019 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T10:59:07.019Z,1538737147.019 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2018-10-05T10:59:07.394Z,1538737147.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T10:59:07.394Z,1538737147.394 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:59:07.395Z,1538737147.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T10:59:07.395Z,1538737147.395 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T10:59:07.395Z,1538737147.395 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T10:59:07.396Z,1538737147.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:02:07.477Z,1538737327.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:02:07.477Z,1538737327.477 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2018-10-05T11:02:07.477Z,1538737327.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:02:07.479Z,1538737327.479 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:02:07.479Z,1538737327.479 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2018-10-05T11:02:07.479Z,1538737327.479 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:02:07.493Z,1538737327.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:02:07.493Z,1538737327.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:02:10.712Z,1538737330.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:02:10.712Z,1538737330.712 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2018-10-05T11:02:10.713Z,1538737330.713 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:02:10.729Z,1538737330.729 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2018-10-05T11:02:10.822Z,1538737330.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:02:10.822Z,1538737330.822 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:02:10.823Z,1538737330.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:02:10.823Z,1538737330.823 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:02:10.824Z,1538737330.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:02:10.824Z,1538737330.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:03:21.375Z,1538737401.375 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T10:58:18.5Z
2018-10-05T11:03:21.375Z,1538737401.375 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T11:03:21.375Z,1538737401.375 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T11:03:26.312Z,1538737406.312 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0538.lzma
2018-10-05T11:03:27.074Z,1538737407.074 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0538.lzma.bak
2018-10-05T11:03:27.075Z,1538737407.075 [DataOverHttps](INFO): SBD MOMSN=8611659
2018-10-05T11:03:36.290Z,1538737416.290 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0539.lzma
2018-10-05T11:03:37.038Z,1538737417.038 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0539.lzma.bak
2018-10-05T11:03:37.038Z,1538737417.038 [DataOverHttps](INFO): SBD MOMSN=8611661
2018-10-05T11:03:38.030Z,1538737418.030 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T11:03:38.030Z,1538737418.030 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T11:03:38.030Z,1538737418.030 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T11:05:10.825Z,1538737510.825 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:05:10.825Z,1538737510.825 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2018-10-05T11:05:10.825Z,1538737510.825 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:05:10.827Z,1538737510.827 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:05:10.827Z,1538737510.827 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2018-10-05T11:05:10.827Z,1538737510.827 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:05:10.840Z,1538737510.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:05:10.862Z,1538737510.862 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:05:11.258Z,1538737511.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:05:11.258Z,1538737511.258 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2018-10-05T11:05:11.259Z,1538737511.259 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:05:11.259Z,1538737511.259 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2018-10-05T11:05:11.626Z,1538737511.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:05:11.626Z,1538737511.626 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:05:11.627Z,1538737511.627 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:05:11.627Z,1538737511.627 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:05:11.627Z,1538737511.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:05:11.628Z,1538737511.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:06:34.155Z,1538737594.155 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T11:06:34.155Z,1538737594.155 [NAL9602] Data Fault, FailCount= 3
2018-10-05T11:06:34.155Z,1538737594.155 [NAL9602](ERROR): Data Fault
2018-10-05T11:06:34.296Z,1538737594.296 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T11:06:34.554Z,1538737594.554 [NAL9602](INFO): Powering down
2018-10-05T11:06:40.025Z,1538737600.025 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T11:06:40.025Z,1538737600.025 [NAL9602] No Fault, FailCount= 3
2018-10-05T11:07:04.843Z,1538737624.843 [NAL9602](INFO): Powering up NAL9602
2018-10-05T11:07:15.816Z,1538737635.816 [NAL9602](INFO): NAL9602 initialized
2018-10-05T11:08:11.987Z,1538737691.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:08:11.987Z,1538737691.987 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2018-10-05T11:08:11.987Z,1538737691.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:08:11.990Z,1538737691.990 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:08:11.990Z,1538737691.990 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2018-10-05T11:08:11.990Z,1538737691.990 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:08:12.015Z,1538737692.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:08:12.015Z,1538737692.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:08:12.442Z,1538737692.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:08:12.442Z,1538737692.442 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2018-10-05T11:08:12.442Z,1538737692.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:08:12.442Z,1538737692.442 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2018-10-05T11:08:12.790Z,1538737692.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:08:12.791Z,1538737692.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:08:12.791Z,1538737692.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:08:12.791Z,1538737692.791 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:08:12.792Z,1538737692.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:08:12.792Z,1538737692.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:08:15.185Z,1538737695.185 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T11:08:15.185Z,1538737695.185 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100504131283,35.0, 0.0,144

2018-10-05T11:08:38.511Z,1538737718.511 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T11:08:38.511Z,1538737718.511 [Default:CheckIn:C.Wait] Stopped
2018-10-05T11:08:38.511Z,1538737718.511 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T11:08:38.511Z,1538737718.511 [Default:CheckIn:D] Running Loop=1
2018-10-05T11:08:38.906Z,1538737718.906 [Default:CheckIn:D] Stopped
2018-10-05T11:08:38.906Z,1538737718.906 [Default:CheckIn:E] Running Loop=1
2018-10-05T11:08:39.288Z,1538737719.288 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1852.185677 min 
2018-10-05T11:08:39.289Z,1538737719.289 [Default:CheckIn:E] Stopped
2018-10-05T11:08:39.289Z,1538737719.289 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T11:08:39.289Z,1538737719.289 [Default:CheckIn] Stopped
2018-10-05T11:08:39.289Z,1538737719.289 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T11:08:39.289Z,1538737719.289 [Default:CheckIn](INFO): Running loop #180
2018-10-05T11:08:39.289Z,1538737719.289 [Default:CheckIn] Running Loop=180
2018-10-05T11:08:39.290Z,1538737719.290 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T11:08:39.290Z,1538737719.290 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T11:11:12.995Z,1538737872.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:11:12.995Z,1538737872.995 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2018-10-05T11:11:12.995Z,1538737872.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:11:13.001Z,1538737873.001 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:11:13.001Z,1538737873.001 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2018-10-05T11:11:13.001Z,1538737873.001 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:11:13.023Z,1538737873.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:11:13.023Z,1538737873.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:11:13.430Z,1538737873.430 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:11:13.430Z,1538737873.430 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2018-10-05T11:11:13.430Z,1538737873.430 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:11:13.430Z,1538737873.430 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2018-10-05T11:11:13.808Z,1538737873.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:11:13.809Z,1538737873.809 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:11:13.809Z,1538737873.809 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:11:13.813Z,1538737873.813 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:11:13.814Z,1538737873.814 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:11:13.814Z,1538737873.814 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:13:41.862Z,1538738021.862 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T11:08:39.3Z
2018-10-05T11:13:41.862Z,1538738021.862 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T11:13:41.863Z,1538738021.863 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T11:13:46.796Z,1538738026.796 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0541.lzma
2018-10-05T11:13:47.558Z,1538738027.558 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0541.lzma.bak
2018-10-05T11:13:47.558Z,1538738027.558 [DataOverHttps](INFO): SBD MOMSN=8611665
2018-10-05T11:13:56.755Z,1538738036.755 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0542.lzma
2018-10-05T11:13:57.530Z,1538738037.530 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0542.lzma.bak
2018-10-05T11:13:57.530Z,1538738037.530 [DataOverHttps](INFO): SBD MOMSN=8611667
2018-10-05T11:13:58.484Z,1538738038.484 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T11:13:58.484Z,1538738038.484 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T11:13:58.484Z,1538738038.484 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T11:14:13.873Z,1538738053.873 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:14:13.873Z,1538738053.873 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2018-10-05T11:14:13.874Z,1538738053.874 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:14:13.875Z,1538738053.875 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:14:13.876Z,1538738053.876 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2018-10-05T11:14:13.876Z,1538738053.876 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:14:13.889Z,1538738053.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:14:13.890Z,1538738053.890 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:14:14.268Z,1538738054.268 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:14:14.268Z,1538738054.268 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2018-10-05T11:14:14.269Z,1538738054.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:14:14.269Z,1538738054.269 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2018-10-05T11:14:14.657Z,1538738054.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:14:14.658Z,1538738054.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:14:14.658Z,1538738054.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:14:14.659Z,1538738054.659 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:14:14.659Z,1538738054.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:14:14.659Z,1538738054.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:17:14.887Z,1538738234.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:17:14.887Z,1538738234.887 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2018-10-05T11:17:14.887Z,1538738234.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:17:14.889Z,1538738234.889 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:17:14.889Z,1538738234.889 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2018-10-05T11:17:14.890Z,1538738234.890 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:17:14.911Z,1538738234.911 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:17:14.911Z,1538738234.911 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:17:15.286Z,1538738235.286 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:17:15.286Z,1538738235.286 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2018-10-05T11:17:15.287Z,1538738235.286 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:17:15.287Z,1538738235.287 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2018-10-05T11:17:15.677Z,1538738235.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:17:15.678Z,1538738235.678 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:17:15.678Z,1538738235.678 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:17:15.679Z,1538738235.679 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:17:15.679Z,1538738235.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:17:15.679Z,1538738235.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:17:16.832Z,1538738236.832 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T11:17:16.832Z,1538738236.832 [NAL9602] Data Fault, FailCount= 4
2018-10-05T11:17:16.832Z,1538738236.832 [NAL9602](ERROR): Data Fault
2018-10-05T11:17:16.908Z,1538738236.908 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T11:17:17.231Z,1538738237.231 [NAL9602](INFO): Powering down
2018-10-05T11:17:18.122Z,1538738238.122 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T11:17:18.122Z,1538738238.122 [NAL9602] No Fault, FailCount= 4
2018-10-05T11:17:47.335Z,1538738267.335 [NAL9602](INFO): Powering up NAL9602
2018-10-05T11:17:58.535Z,1538738278.535 [NAL9602](INFO): NAL9602 initialized
2018-10-05T11:18:58.747Z,1538738338.747 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T11:18:58.747Z,1538738338.747 [Default:CheckIn:C.Wait] Stopped
2018-10-05T11:18:58.747Z,1538738338.747 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T11:18:58.747Z,1538738338.747 [Default:CheckIn:D] Running Loop=1
2018-10-05T11:18:59.164Z,1538738339.164 [Default:CheckIn:D] Stopped
2018-10-05T11:18:59.164Z,1538738339.164 [Default:CheckIn:E] Running Loop=1
2018-10-05T11:18:59.565Z,1538738339.565 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1862.523177 min 
2018-10-05T11:18:59.566Z,1538738339.566 [Default:CheckIn:E] Stopped
2018-10-05T11:18:59.566Z,1538738339.566 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T11:18:59.566Z,1538738339.566 [Default:CheckIn] Stopped
2018-10-05T11:18:59.566Z,1538738339.566 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T11:18:59.566Z,1538738339.566 [Default:CheckIn](INFO): Running loop #181
2018-10-05T11:18:59.566Z,1538738339.566 [Default:CheckIn] Running Loop=181
2018-10-05T11:18:59.566Z,1538738339.566 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T11:18:59.566Z,1538738339.566 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T11:20:15.769Z,1538738415.769 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:20:15.770Z,1538738415.770 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2018-10-05T11:20:15.770Z,1538738415.770 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:20:15.777Z,1538738415.777 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:20:15.777Z,1538738415.777 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2018-10-05T11:20:15.777Z,1538738415.777 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:20:15.799Z,1538738415.799 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:20:15.800Z,1538738415.800 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:20:16.186Z,1538738416.186 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:20:16.186Z,1538738416.186 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2018-10-05T11:20:16.187Z,1538738416.187 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:20:16.187Z,1538738416.187 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2018-10-05T11:20:16.550Z,1538738416.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:20:16.550Z,1538738416.550 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:20:16.550Z,1538738416.550 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:20:16.551Z,1538738416.551 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:20:16.551Z,1538738416.551 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:20:16.552Z,1538738416.552 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:22:59.140Z,1538738579.140 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T11:22:59.140Z,1538738579.140 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,181005042.0, -0.1,   0.0,1448.9,  0
2018-10-05T11:23:16.773Z,1538738596.773 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:23:16.774Z,1538738596.774 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2018-10-05T11:23:16.774Z,1538738596.774 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:23:16.776Z,1538738596.776 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:23:16.776Z,1538738596.776 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2018-10-05T11:23:16.776Z,1538738596.776 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:23:16.817Z,1538738596.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:23:16.818Z,1538738596.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:23:17.184Z,1538738597.184 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:23:17.184Z,1538738597.184 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2018-10-05T11:23:17.185Z,1538738597.185 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:23:17.185Z,1538738597.185 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2018-10-05T11:23:17.566Z,1538738597.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:23:17.566Z,1538738597.566 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:23:17.567Z,1538738597.567 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:23:17.567Z,1538738597.567 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:23:17.568Z,1538738597.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:23:17.568Z,1538738597.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:24:02.147Z,1538738642.147 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T11:18:59.6Z
2018-10-05T11:24:02.147Z,1538738642.147 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T11:24:02.147Z,1538738642.147 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T11:24:12.607Z,1538738652.607 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0544.lzma
2018-10-05T11:24:13.202Z,1538738653.202 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0544.lzma.bak
2018-10-05T11:24:13.202Z,1538738653.202 [DataOverHttps](INFO): SBD MOMSN=8611671
2018-10-05T11:24:22.464Z,1538738662.464 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0545.lzma
2018-10-05T11:24:23.238Z,1538738663.238 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0545.lzma.bak
2018-10-05T11:24:23.238Z,1538738663.238 [DataOverHttps](INFO): SBD MOMSN=8611673
2018-10-05T11:24:24.211Z,1538738664.211 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T11:24:24.212Z,1538738664.212 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T11:24:24.212Z,1538738664.212 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T11:26:17.829Z,1538738777.829 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:26:17.837Z,1538738777.837 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2018-10-05T11:26:17.837Z,1538738777.837 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:26:17.839Z,1538738777.839 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:26:17.840Z,1538738777.840 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2018-10-05T11:26:17.840Z,1538738777.840 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:26:17.891Z,1538738777.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:26:17.891Z,1538738777.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:26:18.212Z,1538738778.212 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:26:18.212Z,1538738778.212 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2018-10-05T11:26:18.213Z,1538738778.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:26:18.213Z,1538738778.213 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2018-10-05T11:26:18.574Z,1538738778.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:26:18.574Z,1538738778.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:26:18.575Z,1538738778.575 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:26:18.575Z,1538738778.575 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:26:18.576Z,1538738778.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:26:18.576Z,1538738778.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:27:59.540Z,1538738879.540 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T11:27:59.541Z,1538738879.541 [NAL9602] Data Fault, FailCount= 5
2018-10-05T11:27:59.541Z,1538738879.541 [NAL9602](ERROR): Data Fault
2018-10-05T11:27:59.624Z,1538738879.624 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T11:27:59.625Z,1538738879.625 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T11:27:59.703Z,1538738879.703 [NAL9602](INFO): Powering down
2018-10-05T11:27:59.767Z,1538738879.767 [CBIT](INFO): Critical error at 20181005T112759
2018-10-05T11:29:18.697Z,1538738958.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:29:18.698Z,1538738958.698 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2018-10-05T11:29:18.698Z,1538738958.698 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:29:18.700Z,1538738958.700 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:29:18.700Z,1538738958.700 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2018-10-05T11:29:18.700Z,1538738958.700 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:29:18.736Z,1538738958.736 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:29:18.736Z,1538738958.736 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:29:19.127Z,1538738959.127 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:29:19.128Z,1538738959.128 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2018-10-05T11:29:19.128Z,1538738959.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:29:19.128Z,1538738959.128 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2018-10-05T11:29:19.490Z,1538738959.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:29:19.490Z,1538738959.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:29:19.491Z,1538738959.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:29:19.491Z,1538738959.491 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:29:19.491Z,1538738959.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:29:19.492Z,1538738959.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:29:24.688Z,1538738964.688 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T11:29:24.688Z,1538738964.688 [Default:CheckIn:C.Wait] Stopped
2018-10-05T11:29:24.689Z,1538738964.689 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T11:29:24.689Z,1538738964.689 [Default:CheckIn:D] Running Loop=1
2018-10-05T11:29:25.102Z,1538738965.102 [Default:CheckIn:D] Stopped
2018-10-05T11:29:25.102Z,1538738965.102 [Default:CheckIn:E] Running Loop=1
2018-10-05T11:29:25.507Z,1538738965.507 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1872.955599 min 
2018-10-05T11:29:25.507Z,1538738965.507 [Default:CheckIn:E] Stopped
2018-10-05T11:29:25.507Z,1538738965.507 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T11:29:25.508Z,1538738965.508 [Default:CheckIn] Stopped
2018-10-05T11:29:25.508Z,1538738965.508 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T11:29:25.508Z,1538738965.508 [Default:CheckIn](INFO): Running loop #182
2018-10-05T11:29:25.508Z,1538738965.508 [Default:CheckIn] Running Loop=182
2018-10-05T11:29:25.508Z,1538738965.508 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T11:29:25.508Z,1538738965.508 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T11:29:59.607Z,1538738999.607 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T11:29:59.607Z,1538738999.607 [NAL9602] No Fault, FailCount= 5
2018-10-05T11:29:59.959Z,1538738999.959 [NAL9602](INFO): Powering up NAL9602
2018-10-05T11:30:10.767Z,1538739010.767 [NAL9602](INFO): NAL9602 initialized
2018-10-05T11:32:19.587Z,1538739139.587 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:32:19.587Z,1538739139.587 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2018-10-05T11:32:19.587Z,1538739139.587 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:32:19.623Z,1538739139.623 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:32:19.623Z,1538739139.623 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2018-10-05T11:32:19.624Z,1538739139.624 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:32:19.658Z,1538739139.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:32:19.658Z,1538739139.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:32:20.026Z,1538739140.026 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:32:20.026Z,1538739140.026 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2018-10-05T11:32:20.026Z,1538739140.026 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:32:20.026Z,1538739140.026 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2018-10-05T11:32:20.394Z,1538739140.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:32:20.394Z,1538739140.394 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:32:20.395Z,1538739140.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:32:20.395Z,1538739140.395 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:32:20.395Z,1538739140.395 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:32:20.396Z,1538739140.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:34:27.841Z,1538739267.841 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T11:29:25.5Z
2018-10-05T11:34:27.841Z,1538739267.841 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T11:34:27.841Z,1538739267.841 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T11:34:32.765Z,1538739272.765 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0547.lzma
2018-10-05T11:34:33.546Z,1538739273.546 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0547.lzma.bak
2018-10-05T11:34:33.546Z,1538739273.546 [DataOverHttps](INFO): SBD MOMSN=8611677
2018-10-05T11:34:42.724Z,1538739282.724 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0548.lzma
2018-10-05T11:34:43.522Z,1538739283.522 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0548.lzma.bak
2018-10-05T11:34:43.522Z,1538739283.522 [DataOverHttps](INFO): SBD MOMSN=8611680
2018-10-05T11:34:44.476Z,1538739284.476 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T11:34:44.476Z,1538739284.476 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T11:34:44.476Z,1538739284.476 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T11:35:23.113Z,1538739323.113 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:35:23.114Z,1538739323.114 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2018-10-05T11:35:23.114Z,1538739323.114 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:35:23.116Z,1538739323.116 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:35:23.116Z,1538739323.116 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2018-10-05T11:35:23.116Z,1538739323.116 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:35:23.146Z,1538739323.146 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:35:23.146Z,1538739323.146 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:35:23.255Z,1538739323.255 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:35:23.255Z,1538739323.255 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2018-10-05T11:35:23.256Z,1538739323.256 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:35:23.256Z,1538739323.256 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2018-10-05T11:35:23.615Z,1538739323.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:35:23.615Z,1538739323.615 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:35:23.615Z,1538739323.615 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:35:23.616Z,1538739323.616 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:35:23.616Z,1538739323.616 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:35:23.617Z,1538739323.617 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:35:24.010Z,1538739324.010 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T11:38:23.723Z,1538739503.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:38:23.723Z,1538739503.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2018-10-05T11:38:23.723Z,1538739503.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:38:23.731Z,1538739503.731 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:38:23.731Z,1538739503.731 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2018-10-05T11:38:23.731Z,1538739503.731 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:38:23.786Z,1538739503.786 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:38:23.786Z,1538739503.786 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:38:24.160Z,1538739504.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:38:24.160Z,1538739504.160 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2018-10-05T11:38:24.161Z,1538739504.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:38:24.161Z,1538739504.161 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2018-10-05T11:38:24.510Z,1538739504.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:38:24.510Z,1538739504.510 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:38:24.511Z,1538739504.510 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:38:24.511Z,1538739504.511 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:38:24.511Z,1538739504.511 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:38:24.512Z,1538739504.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:39:44.840Z,1538739584.840 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T11:39:44.840Z,1538739584.840 [Default:CheckIn:C.Wait] Stopped
2018-10-05T11:39:44.840Z,1538739584.840 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T11:39:44.840Z,1538739584.840 [Default:CheckIn:D] Running Loop=1
2018-10-05T11:39:45.212Z,1538739585.212 [Default:CheckIn:D] Stopped
2018-10-05T11:39:45.212Z,1538739585.212 [Default:CheckIn:E] Running Loop=1
2018-10-05T11:39:45.614Z,1538739585.614 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1883.290755 min 
2018-10-05T11:39:45.615Z,1538739585.615 [Default:CheckIn:E] Stopped
2018-10-05T11:39:45.615Z,1538739585.615 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T11:39:45.615Z,1538739585.615 [Default:CheckIn] Stopped
2018-10-05T11:39:45.615Z,1538739585.615 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T11:39:45.615Z,1538739585.615 [Default:CheckIn](INFO): Running loop #183
2018-10-05T11:39:45.615Z,1538739585.615 [Default:CheckIn] Running Loop=183
2018-10-05T11:39:45.615Z,1538739585.615 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T11:39:45.616Z,1538739585.616 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T11:40:13.315Z,1538739613.315 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T11:40:13.315Z,1538739613.315 [NAL9602] Data Fault, FailCount= 1
2018-10-05T11:40:13.315Z,1538739613.315 [NAL9602](ERROR): Data Fault
2018-10-05T11:40:13.420Z,1538739613.420 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T11:40:13.719Z,1538739613.719 [NAL9602](INFO): Powering down
2018-10-05T11:40:14.576Z,1538739614.576 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T11:40:14.576Z,1538739614.576 [NAL9602] No Fault, FailCount= 1
2018-10-05T11:40:43.799Z,1538739643.799 [NAL9602](INFO): Powering up NAL9602
2018-10-05T11:40:54.995Z,1538739654.995 [NAL9602](INFO): NAL9602 initialized
2018-10-05T11:41:24.615Z,1538739684.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:41:24.615Z,1538739684.615 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2018-10-05T11:41:24.615Z,1538739684.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:41:24.617Z,1538739684.617 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:41:24.618Z,1538739684.618 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2018-10-05T11:41:24.618Z,1538739684.618 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:41:24.636Z,1538739684.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:41:24.636Z,1538739684.636 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:41:24.636Z,1538739684.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:41:24.637Z,1538739684.637 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:42:28.048Z,1538739748.048 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-05T11:44:47.983Z,1538739887.983 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T11:39:45.6Z
2018-10-05T11:44:47.983Z,1538739887.983 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T11:44:47.983Z,1538739887.983 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T11:44:52.900Z,1538739892.900 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0550.lzma
2018-10-05T11:44:53.729Z,1538739893.728 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0550.lzma.bak
2018-10-05T11:44:53.729Z,1538739893.729 [DataOverHttps](INFO): SBD MOMSN=8611684
2018-10-05T11:45:03.396Z,1538739903.396 [DataOverHttps](INFO): Sending 222 bytes from file Logs/20181004T041305/Express0551.lzma
2018-10-05T11:45:04.178Z,1538739904.178 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0551.lzma.bak
2018-10-05T11:45:04.178Z,1538739904.178 [DataOverHttps](INFO): SBD MOMSN=8611686
2018-10-05T11:45:05.173Z,1538739905.173 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T11:45:05.173Z,1538739905.173 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T11:45:05.174Z,1538739905.174 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T11:48:49.415Z,1538740129.415 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T11:49:00.195Z,1538740140.195 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T11:49:00.195Z,1538740140.195 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-3268,-32768,-32768,V
2018-10-05T11:50:05.571Z,1538740205.571 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T11:50:05.571Z,1538740205.571 [Default:CheckIn:C.Wait] Stopped
2018-10-05T11:50:05.571Z,1538740205.571 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T11:50:05.571Z,1538740205.571 [Default:CheckIn:D] Running Loop=1
2018-10-05T11:50:05.978Z,1538740205.978 [Default:CheckIn:D] Stopped
2018-10-05T11:50:05.979Z,1538740205.979 [Default:CheckIn:E] Running Loop=1
2018-10-05T11:50:06.376Z,1538740206.376 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1893.636849 min 
2018-10-05T11:50:06.376Z,1538740206.376 [Default:CheckIn:E] Stopped
2018-10-05T11:50:06.377Z,1538740206.377 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T11:50:06.377Z,1538740206.377 [Default:CheckIn] Stopped
2018-10-05T11:50:06.377Z,1538740206.377 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T11:50:06.377Z,1538740206.377 [Default:CheckIn](INFO): Running loop #184
2018-10-05T11:50:06.377Z,1538740206.377 [Default:CheckIn] Running Loop=184
2018-10-05T11:50:06.377Z,1538740206.377 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T11:50:06.378Z,1538740206.378 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T11:50:58.079Z,1538740258.079 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T11:50:58.079Z,1538740258.079 [NAL9602] Data Fault, FailCount= 2
2018-10-05T11:50:58.079Z,1538740258.079 [NAL9602](ERROR): Data Fault
2018-10-05T11:50:58.168Z,1538740258.168 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T11:51:01.256Z,1538740261.256 [NAL9602](INFO): Powering down
2018-10-05T11:51:01.846Z,1538740261.846 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T11:51:01.846Z,1538740261.846 [NAL9602] No Fault, FailCount= 2
2018-10-05T11:51:31.359Z,1538740291.359 [NAL9602](INFO): Powering up NAL9602
2018-10-05T11:51:42.291Z,1538740302.291 [NAL9602](INFO): NAL9602 initialized
2018-10-05T11:55:08.068Z,1538740508.068 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T11:50:06.4Z
2018-10-05T11:55:08.068Z,1538740508.068 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T11:55:08.068Z,1538740508.068 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T11:55:12.972Z,1538740512.972 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0553.lzma
2018-10-05T11:55:13.756Z,1538740513.756 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0553.lzma.bak
2018-10-05T11:55:13.756Z,1538740513.756 [DataOverHttps](INFO): SBD MOMSN=8611692
2018-10-05T11:55:23.004Z,1538740523.004 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0554.lzma
2018-10-05T11:55:23.786Z,1538740523.786 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0554.lzma.bak
2018-10-05T11:55:23.786Z,1538740523.786 [DataOverHttps](INFO): SBD MOMSN=8611694
2018-10-05T11:55:24.749Z,1538740524.749 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T11:55:24.749Z,1538740524.749 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T11:55:24.749Z,1538740524.749 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T11:56:24.779Z,1538740584.779 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:56:24.780Z,1538740584.780 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2018-10-05T11:56:24.780Z,1538740584.780 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:56:24.780Z,1538740584.780 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2018-10-05T11:56:25.138Z,1538740585.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:56:25.138Z,1538740585.138 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:56:25.139Z,1538740585.139 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:56:25.139Z,1538740585.139 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:56:25.140Z,1538740585.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:56:25.140Z,1538740585.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:58:25.999Z,1538740705.999 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T11:59:25.362Z,1538740765.362 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:59:25.362Z,1538740765.362 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-10-05T11:59:25.362Z,1538740765.362 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T11:59:25.364Z,1538740765.364 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T11:59:25.364Z,1538740765.364 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-05T11:59:25.364Z,1538740765.364 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T11:59:25.385Z,1538740765.385 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T11:59:25.386Z,1538740765.386 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T11:59:25.779Z,1538740765.779 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T11:59:25.779Z,1538740765.779 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-10-05T11:59:25.780Z,1538740765.780 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T11:59:25.780Z,1538740765.780 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-05T11:59:26.153Z,1538740766.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T11:59:26.153Z,1538740766.153 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:59:26.153Z,1538740766.153 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T11:59:26.154Z,1538740766.154 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T11:59:26.154Z,1538740766.154 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T11:59:26.155Z,1538740766.155 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:00:25.146Z,1538740825.146 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T12:00:25.146Z,1538740825.146 [Default:CheckIn:C.Wait] Stopped
2018-10-05T12:00:25.146Z,1538740825.146 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T12:00:25.146Z,1538740825.146 [Default:CheckIn:D] Running Loop=1
2018-10-05T12:00:25.525Z,1538740825.525 [Default:CheckIn:D] Stopped
2018-10-05T12:00:25.525Z,1538740825.525 [Default:CheckIn:E] Running Loop=1
2018-10-05T12:00:25.932Z,1538740825.932 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1903.962630 min 
2018-10-05T12:00:25.953Z,1538740825.953 [Default:CheckIn:E] Stopped
2018-10-05T12:00:25.953Z,1538740825.953 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T12:00:25.953Z,1538740825.953 [Default:CheckIn] Stopped
2018-10-05T12:00:25.953Z,1538740825.953 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T12:00:25.953Z,1538740825.953 [Default:CheckIn](INFO): Running loop #185
2018-10-05T12:00:25.954Z,1538740825.954 [Default:CheckIn] Running Loop=185
2018-10-05T12:00:25.954Z,1538740825.954 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T12:00:25.954Z,1538740825.954 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T12:01:44.388Z,1538740904.388 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T12:01:44.388Z,1538740904.388 [NAL9602] Data Fault, FailCount= 3
2018-10-05T12:01:44.388Z,1538740904.388 [NAL9602](ERROR): Data Fault
2018-10-05T12:01:44.449Z,1538740904.449 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T12:01:44.787Z,1538740904.787 [NAL9602](INFO): Powering down
2018-10-05T12:01:45.628Z,1538740905.628 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T12:01:45.628Z,1538740905.628 [NAL9602] No Fault, FailCount= 3
2018-10-05T12:02:15.143Z,1538740935.143 [NAL9602](INFO): Powering up NAL9602
2018-10-05T12:02:25.943Z,1538740945.943 [NAL9602](INFO): NAL9602 initialized
2018-10-05T12:02:26.396Z,1538740946.396 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:02:26.396Z,1538740946.396 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-10-05T12:02:26.396Z,1538740946.396 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:02:26.398Z,1538740946.398 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:02:26.398Z,1538740946.398 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-05T12:02:26.398Z,1538740946.398 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:02:26.428Z,1538740946.428 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:02:26.428Z,1538740946.428 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:02:26.816Z,1538740946.816 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:02:26.816Z,1538740946.816 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-10-05T12:02:26.817Z,1538740946.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:02:26.817Z,1538740946.817 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-05T12:02:27.188Z,1538740947.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:02:27.197Z,1538740947.197 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:02:27.197Z,1538740947.197 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:02:27.198Z,1538740947.198 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:02:27.198Z,1538740947.198 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:02:27.199Z,1538740947.199 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:05:28.047Z,1538741128.047 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:05:28.047Z,1538741128.047 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-10-05T12:05:28.048Z,1538741128.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:05:28.050Z,1538741128.050 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:05:28.050Z,1538741128.050 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-05T12:05:28.050Z,1538741128.050 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:05:28.052Z,1538741128.052 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T12:00:25.0Z
2018-10-05T12:05:28.052Z,1538741128.052 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T12:05:28.052Z,1538741128.052 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T12:05:28.064Z,1538741128.064 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:05:28.064Z,1538741128.064 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:05:28.183Z,1538741128.183 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:05:28.183Z,1538741128.183 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-10-05T12:05:28.184Z,1538741128.184 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:05:28.184Z,1538741128.184 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-05T12:05:28.870Z,1538741128.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:05:28.870Z,1538741128.870 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:05:28.871Z,1538741128.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:05:28.871Z,1538741128.871 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:05:28.871Z,1538741128.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:05:28.872Z,1538741128.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:05:32.997Z,1538741132.997 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0556.lzma
2018-10-05T12:05:33.894Z,1538741133.894 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0556.lzma.bak
2018-10-05T12:05:33.894Z,1538741133.894 [DataOverHttps](INFO): SBD MOMSN=8611698
2018-10-05T12:05:42.988Z,1538741142.988 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0557.lzma
2018-10-05T12:05:47.422Z,1538741147.422 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0557.lzma.bak
2018-10-05T12:05:47.423Z,1538741147.423 [DataOverHttps](INFO): SBD MOMSN=8611700
2018-10-05T12:05:48.292Z,1538741148.292 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T12:05:48.292Z,1538741148.292 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T12:05:48.292Z,1538741148.292 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T12:08:29.195Z,1538741309.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:08:29.195Z,1538741309.195 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-10-05T12:08:29.195Z,1538741309.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:08:29.201Z,1538741309.201 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:08:29.201Z,1538741309.201 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-05T12:08:29.201Z,1538741309.201 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:08:29.227Z,1538741309.227 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:08:29.228Z,1538741309.228 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:08:29.599Z,1538741309.599 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:08:29.600Z,1538741309.600 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-10-05T12:08:29.600Z,1538741309.600 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:08:29.600Z,1538741309.600 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-05T12:08:29.989Z,1538741309.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:08:29.990Z,1538741309.990 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:08:29.990Z,1538741309.990 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:08:29.991Z,1538741309.991 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:08:29.991Z,1538741309.991 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:08:29.991Z,1538741309.991 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:10:48.815Z,1538741448.815 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T12:10:48.815Z,1538741448.815 [Default:CheckIn:C.Wait] Stopped
2018-10-05T12:10:48.815Z,1538741448.815 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T12:10:48.815Z,1538741448.815 [Default:CheckIn:D] Running Loop=1
2018-10-05T12:10:49.213Z,1538741449.213 [Default:CheckIn:D] Stopped
2018-10-05T12:10:49.213Z,1538741449.213 [Default:CheckIn:E] Running Loop=1
2018-10-05T12:10:49.605Z,1538741449.605 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1914.357292 min 
2018-10-05T12:10:49.605Z,1538741449.605 [Default:CheckIn:E] Stopped
2018-10-05T12:10:49.606Z,1538741449.606 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T12:10:49.606Z,1538741449.606 [Default:CheckIn] Stopped
2018-10-05T12:10:49.606Z,1538741449.606 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T12:10:49.606Z,1538741449.606 [Default:CheckIn](INFO): Running loop #186
2018-10-05T12:10:49.606Z,1538741449.606 [Default:CheckIn] Running Loop=186
2018-10-05T12:10:49.606Z,1538741449.606 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T12:10:49.606Z,1538741449.606 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T12:11:30.161Z,1538741490.161 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:11:30.161Z,1538741490.161 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-10-05T12:11:30.161Z,1538741490.161 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:11:30.163Z,1538741490.163 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:11:30.163Z,1538741490.163 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-05T12:11:30.163Z,1538741490.163 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:11:30.208Z,1538741490.208 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:11:30.217Z,1538741490.217 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:11:30.608Z,1538741490.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:11:30.608Z,1538741490.608 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-10-05T12:11:30.626Z,1538741490.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:11:30.626Z,1538741490.626 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-05T12:11:30.966Z,1538741490.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:11:30.966Z,1538741490.966 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:11:30.967Z,1538741490.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:11:30.967Z,1538741490.967 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:11:30.968Z,1538741490.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:11:30.968Z,1538741490.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:11:47.093Z,1538741507.093 [RDI_Pathfinder](ERROR): DVL BIT error. See manual. Result code: -32768
2018-10-05T12:11:47.094Z,1538741507.094 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-05T12:12:26.783Z,1538741546.783 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T12:12:26.783Z,1538741546.783 [NAL9602] Data Fault, FailCount= 4
2018-10-05T12:12:26.783Z,1538741546.783 [NAL9602](ERROR): Data Fault
2018-10-05T12:12:26.860Z,1538741546.860 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T12:12:27.159Z,1538741547.159 [NAL9602](INFO): Powering down
2018-10-05T12:12:28.036Z,1538741548.036 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T12:12:28.036Z,1538741548.036 [NAL9602] No Fault, FailCount= 4
2018-10-05T12:12:57.239Z,1538741577.239 [NAL9602](INFO): Powering up NAL9602
2018-10-05T12:13:08.439Z,1538741588.439 [NAL9602](INFO): NAL9602 initialized
2018-10-05T12:13:32.174Z,1538741612.174 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8b,0ffd,*15.887,*-0.005,*0.000
2018-10-05T12:14:31.103Z,1538741671.103 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:14:31.103Z,1538741671.103 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-10-05T12:14:31.103Z,1538741671.103 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:14:31.111Z,1538741671.111 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:14:31.112Z,1538741671.112 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-05T12:14:31.112Z,1538741671.112 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:14:31.142Z,1538741671.142 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:14:31.142Z,1538741671.142 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:14:31.497Z,1538741671.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:14:31.497Z,1538741671.497 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-10-05T12:14:31.498Z,1538741671.498 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:14:31.498Z,1538741671.498 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-05T12:14:31.874Z,1538741671.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:14:31.874Z,1538741671.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:14:31.875Z,1538741671.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:14:31.875Z,1538741671.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:14:31.875Z,1538741671.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:14:31.876Z,1538741671.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:15:52.089Z,1538741752.089 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T12:10:49.6Z
2018-10-05T12:15:52.089Z,1538741752.089 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T12:15:52.090Z,1538741752.090 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T12:15:52.793Z,1538741752.793 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0559.lzma
2018-10-05T12:15:53.723Z,1538741753.723 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0559.lzma.bak
2018-10-05T12:15:53.723Z,1538741753.723 [DataOverHttps](INFO): SBD MOMSN=8611704
2018-10-05T12:16:02.957Z,1538741762.957 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20181004T041305/Express0560.lzma
2018-10-05T12:16:03.725Z,1538741763.725 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0560.lzma.bak
2018-10-05T12:16:03.725Z,1538741763.725 [DataOverHttps](INFO): SBD MOMSN=8611706
2018-10-05T12:16:04.714Z,1538741764.714 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T12:16:04.714Z,1538741764.714 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T12:16:04.714Z,1538741764.714 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T12:17:32.237Z,1538741852.237 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:17:32.237Z,1538741852.237 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-10-05T12:17:32.237Z,1538741852.237 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:17:32.239Z,1538741852.239 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:17:32.239Z,1538741852.239 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-05T12:17:32.239Z,1538741852.239 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:17:32.277Z,1538741852.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:17:32.277Z,1538741852.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:17:32.662Z,1538741852.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:17:32.662Z,1538741852.662 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-10-05T12:17:32.662Z,1538741852.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:17:32.663Z,1538741852.663 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-05T12:17:33.032Z,1538741853.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:17:33.038Z,1538741853.038 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:17:33.038Z,1538741853.038 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:17:33.039Z,1538741853.039 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:17:33.040Z,1538741853.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:17:33.045Z,1538741853.045 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:20:33.107Z,1538742033.107 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:20:33.108Z,1538742033.108 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-10-05T12:20:33.108Z,1538742033.108 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:20:33.114Z,1538742033.114 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:20:33.114Z,1538742033.114 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-05T12:20:33.114Z,1538742033.114 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:20:33.144Z,1538742033.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:20:33.144Z,1538742033.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:20:33.524Z,1538742033.524 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:20:33.524Z,1538742033.524 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-10-05T12:20:33.524Z,1538742033.524 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:20:33.524Z,1538742033.524 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-05T12:20:33.926Z,1538742033.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:20:33.926Z,1538742033.926 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:20:33.927Z,1538742033.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:20:33.927Z,1538742033.927 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:20:33.927Z,1538742033.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:20:33.928Z,1538742033.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:21:05.209Z,1538742065.209 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T12:21:05.209Z,1538742065.209 [Default:CheckIn:C.Wait] Stopped
2018-10-05T12:21:05.209Z,1538742065.209 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T12:21:05.209Z,1538742065.209 [Default:CheckIn:D] Running Loop=1
2018-10-05T12:21:05.611Z,1538742065.611 [Default:CheckIn:D] Stopped
2018-10-05T12:21:05.611Z,1538742065.611 [Default:CheckIn:E] Running Loop=1
2018-10-05T12:21:06.033Z,1538742066.033 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1924.630729 min 
2018-10-05T12:21:06.034Z,1538742066.034 [Default:CheckIn:E] Stopped
2018-10-05T12:21:06.034Z,1538742066.034 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T12:21:06.034Z,1538742066.034 [Default:CheckIn] Stopped
2018-10-05T12:21:06.034Z,1538742066.034 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T12:21:06.034Z,1538742066.034 [Default:CheckIn](INFO): Running loop #187
2018-10-05T12:21:06.034Z,1538742066.034 [Default:CheckIn] Running Loop=187
2018-10-05T12:21:06.034Z,1538742066.034 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T12:21:06.035Z,1538742066.035 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T12:22:36.968Z,1538742156.968 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-05T12:23:11.443Z,1538742191.443 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T12:23:11.443Z,1538742191.443 [NAL9602] Data Fault, FailCount= 5
2018-10-05T12:23:11.443Z,1538742191.443 [NAL9602](ERROR): Data Fault
2018-10-05T12:23:11.512Z,1538742191.512 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T12:23:11.517Z,1538742191.517 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T12:23:11.835Z,1538742191.835 [NAL9602](INFO): Powering down
2018-10-05T12:23:11.901Z,1538742191.901 [CBIT](INFO): Critical error at 20181005T122311
2018-10-05T12:23:34.259Z,1538742214.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:23:34.259Z,1538742214.259 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-10-05T12:23:34.259Z,1538742214.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:23:34.261Z,1538742214.261 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:23:34.261Z,1538742214.261 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-05T12:23:34.261Z,1538742214.261 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:23:34.298Z,1538742214.298 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:23:34.299Z,1538742214.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:23:34.719Z,1538742214.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:23:34.719Z,1538742214.719 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-10-05T12:23:34.720Z,1538742214.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:23:34.720Z,1538742214.720 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-05T12:23:35.076Z,1538742215.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:23:35.077Z,1538742215.077 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:23:35.077Z,1538742215.077 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:23:35.078Z,1538742215.078 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:23:35.078Z,1538742215.078 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:23:35.079Z,1538742215.079 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:25:11.778Z,1538742311.778 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T12:25:11.778Z,1538742311.778 [NAL9602] No Fault, FailCount= 5
2018-10-05T12:25:12.093Z,1538742312.093 [NAL9602](INFO): Powering up NAL9602
2018-10-05T12:25:22.905Z,1538742322.905 [NAL9602](INFO): NAL9602 initialized
2018-10-05T12:26:07.436Z,1538742367.436 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T12:21:06.0Z
2018-10-05T12:26:07.436Z,1538742367.436 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T12:26:07.436Z,1538742367.436 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T12:26:12.437Z,1538742372.437 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0562.lzma
2018-10-05T12:26:13.218Z,1538742373.218 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0562.lzma.bak
2018-10-05T12:26:13.218Z,1538742373.218 [DataOverHttps](INFO): SBD MOMSN=8611710
2018-10-05T12:26:25.169Z,1538742385.169 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0563.lzma
2018-10-05T12:26:25.906Z,1538742385.906 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0563.lzma.bak
2018-10-05T12:26:25.906Z,1538742385.906 [DataOverHttps](INFO): SBD MOMSN=8611713
2018-10-05T12:26:26.942Z,1538742386.942 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T12:26:26.942Z,1538742386.942 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T12:26:26.942Z,1538742386.942 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T12:26:35.356Z,1538742395.356 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:26:35.356Z,1538742395.356 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-10-05T12:26:35.356Z,1538742395.356 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:26:35.358Z,1538742395.358 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:26:35.358Z,1538742395.358 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-05T12:26:35.358Z,1538742395.358 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:26:35.372Z,1538742395.372 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:26:35.372Z,1538742395.372 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:26:35.773Z,1538742395.773 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:26:35.773Z,1538742395.773 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-10-05T12:26:35.774Z,1538742395.774 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:26:35.774Z,1538742395.774 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-05T12:26:36.142Z,1538742396.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:26:36.142Z,1538742396.142 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:26:36.142Z,1538742396.142 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:26:36.143Z,1538742396.143 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:26:36.143Z,1538742396.143 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:26:36.144Z,1538742396.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:29:36.227Z,1538742576.227 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:29:36.227Z,1538742576.227 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-10-05T12:29:36.227Z,1538742576.227 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:29:36.233Z,1538742576.233 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:29:36.233Z,1538742576.233 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-05T12:29:36.233Z,1538742576.233 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:29:36.259Z,1538742576.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:29:36.259Z,1538742576.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:29:36.659Z,1538742576.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:29:36.659Z,1538742576.659 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-10-05T12:29:36.660Z,1538742576.660 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:29:36.660Z,1538742576.660 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-05T12:29:37.049Z,1538742577.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:29:37.050Z,1538742577.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:29:37.050Z,1538742577.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:29:37.051Z,1538742577.051 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:29:37.051Z,1538742577.051 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:29:37.052Z,1538742577.052 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:31:27.268Z,1538742687.268 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T12:31:27.268Z,1538742687.268 [Default:CheckIn:C.Wait] Stopped
2018-10-05T12:31:27.268Z,1538742687.268 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T12:31:27.268Z,1538742687.268 [Default:CheckIn:D] Running Loop=1
2018-10-05T12:31:27.715Z,1538742687.715 [Default:CheckIn:D] Stopped
2018-10-05T12:31:27.715Z,1538742687.715 [Default:CheckIn:E] Running Loop=1
2018-10-05T12:31:28.085Z,1538742688.085 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1934.999089 min 
2018-10-05T12:31:28.085Z,1538742688.085 [Default:CheckIn:E] Stopped
2018-10-05T12:31:28.085Z,1538742688.085 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T12:31:28.085Z,1538742688.085 [Default:CheckIn] Stopped
2018-10-05T12:31:28.086Z,1538742688.086 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T12:31:28.086Z,1538742688.086 [Default:CheckIn](INFO): Running loop #188
2018-10-05T12:31:28.086Z,1538742688.086 [Default:CheckIn] Running Loop=188
2018-10-05T12:31:28.086Z,1538742688.086 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T12:31:28.086Z,1538742688.086 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T12:32:37.099Z,1538742757.099 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:32:37.099Z,1538742757.099 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-10-05T12:32:37.099Z,1538742757.099 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:32:37.101Z,1538742757.101 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:32:37.102Z,1538742757.102 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-05T12:32:37.102Z,1538742757.102 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:32:37.115Z,1538742757.115 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:32:37.115Z,1538742757.115 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:32:37.520Z,1538742757.520 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:32:37.520Z,1538742757.520 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-10-05T12:32:37.520Z,1538742757.520 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:32:37.520Z,1538742757.520 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-05T12:32:37.905Z,1538742757.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:32:37.906Z,1538742757.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:32:37.906Z,1538742757.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:32:37.906Z,1538742757.906 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:32:37.907Z,1538742757.907 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:32:37.907Z,1538742757.907 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:35:25.215Z,1538742925.215 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T12:35:25.215Z,1538742925.215 [NAL9602] Data Fault, FailCount= 1
2018-10-05T12:35:25.215Z,1538742925.215 [NAL9602](ERROR): Data Fault
2018-10-05T12:35:25.303Z,1538742925.303 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T12:35:25.617Z,1538742925.617 [NAL9602](INFO): Powering down
2018-10-05T12:35:26.484Z,1538742926.484 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T12:35:26.484Z,1538742926.484 [NAL9602] No Fault, FailCount= 1
2018-10-05T12:35:38.063Z,1538742938.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:35:38.063Z,1538742938.063 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-10-05T12:35:38.063Z,1538742938.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:35:38.069Z,1538742938.069 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:35:38.070Z,1538742938.070 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-05T12:35:38.070Z,1538742938.070 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:35:38.092Z,1538742938.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:35:38.092Z,1538742938.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:35:38.470Z,1538742938.470 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:35:38.470Z,1538742938.470 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-10-05T12:35:38.471Z,1538742938.471 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:35:38.471Z,1538742938.471 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-05T12:35:38.863Z,1538742938.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:35:38.864Z,1538742938.864 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:35:38.864Z,1538742938.864 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:35:38.864Z,1538742938.864 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:35:38.865Z,1538742938.865 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:35:38.866Z,1538742938.866 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:35:55.715Z,1538742955.715 [NAL9602](INFO): Powering up NAL9602
2018-10-05T12:36:06.907Z,1538742966.907 [NAL9602](INFO): NAL9602 initialized
2018-10-05T12:36:30.653Z,1538742990.653 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T12:31:28.1Z
2018-10-05T12:36:30.653Z,1538742990.653 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T12:36:30.653Z,1538742990.653 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T12:36:38.924Z,1538742998.924 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0565.lzma
2018-10-05T12:36:39.731Z,1538742999.731 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0565.lzma.bak
2018-10-05T12:36:39.731Z,1538742999.731 [DataOverHttps](INFO): SBD MOMSN=8611717
2018-10-05T12:36:54.499Z,1538743014.499 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0566.lzma
2018-10-05T12:36:55.992Z,1538743015.992 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0566.lzma.bak
2018-10-05T12:36:55.992Z,1538743015.992 [DataOverHttps](INFO): SBD MOMSN=8611719
2018-10-05T12:36:56.710Z,1538743016.710 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T12:36:56.710Z,1538743016.710 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T12:36:56.710Z,1538743016.710 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T12:38:39.052Z,1538743119.052 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:38:39.052Z,1538743119.052 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-10-05T12:38:39.052Z,1538743119.052 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:38:39.058Z,1538743119.058 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:38:39.058Z,1538743119.058 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-05T12:38:39.058Z,1538743119.058 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:38:39.086Z,1538743119.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:38:39.086Z,1538743119.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:38:39.469Z,1538743119.469 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:38:39.469Z,1538743119.469 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-10-05T12:38:39.470Z,1538743119.470 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:38:39.470Z,1538743119.470 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-05T12:38:39.842Z,1538743119.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:38:39.842Z,1538743119.842 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:38:39.843Z,1538743119.843 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:38:39.843Z,1538743119.843 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:38:39.843Z,1538743119.843 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:38:39.844Z,1538743119.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:41:42.354Z,1538743302.354 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:41:42.354Z,1538743302.354 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-10-05T12:41:42.354Z,1538743302.354 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:41:42.356Z,1538743302.356 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:41:42.357Z,1538743302.357 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-05T12:41:42.357Z,1538743302.357 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:41:42.381Z,1538743302.381 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:41:42.381Z,1538743302.381 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:41:42.491Z,1538743302.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:41:42.491Z,1538743302.491 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-10-05T12:41:42.492Z,1538743302.492 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:41:42.492Z,1538743302.492 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-05T12:41:42.874Z,1538743302.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:41:42.874Z,1538743302.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:41:42.875Z,1538743302.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:41:42.875Z,1538743302.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:41:42.875Z,1538743302.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:41:42.876Z,1538743302.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:41:56.876Z,1538743316.876 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T12:41:56.877Z,1538743316.877 [Default:CheckIn:C.Wait] Stopped
2018-10-05T12:41:56.877Z,1538743316.877 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T12:41:56.877Z,1538743316.877 [Default:CheckIn:D] Running Loop=1
2018-10-05T12:41:57.265Z,1538743317.265 [Default:CheckIn:D] Stopped
2018-10-05T12:41:57.265Z,1538743317.265 [Default:CheckIn:E] Running Loop=1
2018-10-05T12:41:57.679Z,1538743317.679 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1945.491667 min 
2018-10-05T12:41:57.679Z,1538743317.679 [Default:CheckIn:E] Stopped
2018-10-05T12:41:57.679Z,1538743317.679 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T12:41:57.680Z,1538743317.680 [Default:CheckIn] Stopped
2018-10-05T12:41:57.680Z,1538743317.680 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T12:41:57.680Z,1538743317.680 [Default:CheckIn](INFO): Running loop #189
2018-10-05T12:41:57.680Z,1538743317.680 [Default:CheckIn] Running Loop=189
2018-10-05T12:41:57.680Z,1538743317.680 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T12:41:57.680Z,1538743317.680 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T12:42:53.920Z,1538743373.920 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T12:44:42.996Z,1538743482.996 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:44:42.997Z,1538743482.997 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-10-05T12:44:42.997Z,1538743482.997 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:44:43.000Z,1538743483.000 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:44:43.001Z,1538743483.001 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-05T12:44:43.001Z,1538743483.001 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:44:43.033Z,1538743483.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:44:43.034Z,1538743483.034 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:44:43.412Z,1538743483.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:44:43.412Z,1538743483.412 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-10-05T12:44:43.412Z,1538743483.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:44:43.413Z,1538743483.413 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-05T12:44:43.778Z,1538743483.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:44:43.778Z,1538743483.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:44:43.778Z,1538743483.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:44:43.779Z,1538743483.779 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:44:43.779Z,1538743483.779 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:44:43.780Z,1538743483.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:46:08.335Z,1538743568.335 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T12:46:08.335Z,1538743568.335 [NAL9602] Data Fault, FailCount= 2
2018-10-05T12:46:08.335Z,1538743568.335 [NAL9602](ERROR): Data Fault
2018-10-05T12:46:08.392Z,1538743568.392 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T12:46:08.735Z,1538743568.735 [NAL9602](INFO): Powering down
2018-10-05T12:46:09.595Z,1538743569.595 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T12:46:09.595Z,1538743569.595 [NAL9602] No Fault, FailCount= 2
2018-10-05T12:46:39.051Z,1538743599.051 [NAL9602](INFO): Powering up NAL9602
2018-10-05T12:46:50.247Z,1538743610.247 [NAL9602](INFO): NAL9602 initialized
2018-10-05T12:47:00.472Z,1538743620.472 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T12:41:57.7Z
2018-10-05T12:47:00.472Z,1538743620.472 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T12:47:00.472Z,1538743620.472 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T12:47:05.392Z,1538743625.392 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0568.lzma
2018-10-05T12:47:06.359Z,1538743626.359 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0568.lzma.bak
2018-10-05T12:47:06.359Z,1538743626.359 [DataOverHttps](INFO): SBD MOMSN=8611723
2018-10-05T12:47:15.615Z,1538743635.615 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0569.lzma
2018-10-05T12:47:16.388Z,1538743636.388 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0569.lzma.bak
2018-10-05T12:47:16.389Z,1538743636.389 [DataOverHttps](INFO): SBD MOMSN=8611725
2018-10-05T12:47:17.480Z,1538743637.480 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T12:47:17.480Z,1538743637.480 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T12:47:17.480Z,1538743637.480 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T12:47:44.062Z,1538743664.062 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:47:44.062Z,1538743664.062 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-10-05T12:47:44.062Z,1538743664.062 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:47:44.064Z,1538743664.064 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:47:44.064Z,1538743664.064 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-05T12:47:44.065Z,1538743664.065 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:47:44.094Z,1538743664.094 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:47:44.094Z,1538743664.094 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:47:44.482Z,1538743664.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:47:44.482Z,1538743664.482 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-10-05T12:47:44.483Z,1538743664.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:47:44.483Z,1538743664.483 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-05T12:47:44.871Z,1538743664.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:47:44.872Z,1538743664.872 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:47:44.872Z,1538743664.872 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:47:44.872Z,1538743664.872 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:47:44.877Z,1538743664.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:47:44.877Z,1538743664.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:50:45.251Z,1538743845.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:50:45.251Z,1538743845.251 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-10-05T12:50:45.251Z,1538743845.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:50:45.253Z,1538743845.253 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:50:45.253Z,1538743845.253 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-05T12:50:45.253Z,1538743845.253 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:50:45.274Z,1538743845.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:50:45.275Z,1538743845.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:50:45.688Z,1538743845.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:50:45.688Z,1538743845.688 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-10-05T12:50:45.689Z,1538743845.689 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:50:45.693Z,1538743845.693 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-05T12:50:46.054Z,1538743846.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:50:46.054Z,1538743846.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:50:46.055Z,1538743846.055 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:50:46.055Z,1538743846.055 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:50:46.056Z,1538743846.056 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:50:46.056Z,1538743846.056 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:51:28.040Z,1538743888.040 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T12:51:28.040Z,1538743888.040 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100505562283,35.0, -0.1,   0.,  0
2018-10-05T12:52:17.916Z,1538743937.916 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T12:52:17.917Z,1538743937.917 [Default:CheckIn:C.Wait] Stopped
2018-10-05T12:52:17.917Z,1538743937.917 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T12:52:17.917Z,1538743937.917 [Default:CheckIn:D] Running Loop=1
2018-10-05T12:52:18.321Z,1538743938.321 [Default:CheckIn:D] Stopped
2018-10-05T12:52:18.321Z,1538743938.321 [Default:CheckIn:E] Running Loop=1
2018-10-05T12:52:18.737Z,1538743938.737 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1955.842578 min 
2018-10-05T12:52:18.738Z,1538743938.738 [Default:CheckIn:E] Stopped
2018-10-05T12:52:18.738Z,1538743938.738 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T12:52:18.738Z,1538743938.738 [Default:CheckIn] Stopped
2018-10-05T12:52:18.738Z,1538743938.738 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T12:52:18.738Z,1538743938.738 [Default:CheckIn](INFO): Running loop #190
2018-10-05T12:52:18.738Z,1538743938.738 [Default:CheckIn] Running Loop=190
2018-10-05T12:52:18.738Z,1538743938.738 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T12:52:18.739Z,1538743938.739 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T12:53:14.940Z,1538743994.940 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T12:53:49.063Z,1538744029.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:53:49.063Z,1538744029.063 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-10-05T12:53:49.064Z,1538744029.064 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:53:49.065Z,1538744029.065 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:53:49.065Z,1538744029.065 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-05T12:53:49.066Z,1538744029.066 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:53:49.078Z,1538744029.078 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:53:49.079Z,1538744029.079 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:53:49.236Z,1538744029.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:53:49.236Z,1538744029.236 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-10-05T12:53:49.236Z,1538744029.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:53:49.236Z,1538744029.236 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-05T12:53:49.574Z,1538744029.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:53:49.574Z,1538744029.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:53:49.575Z,1538744029.575 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:53:49.575Z,1538744029.575 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:53:49.575Z,1538744029.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:53:49.576Z,1538744029.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:54:28.023Z,1538744068.023 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T12:56:17.231Z,1538744177.231 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T12:56:49.987Z,1538744209.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:56:49.987Z,1538744209.987 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-10-05T12:56:49.987Z,1538744209.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:56:49.989Z,1538744209.989 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:56:49.989Z,1538744209.989 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-05T12:56:49.989Z,1538744209.989 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:56:50.014Z,1538744210.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:56:50.014Z,1538744210.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:56:50.400Z,1538744210.400 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:56:50.400Z,1538744210.400 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-10-05T12:56:50.405Z,1538744210.405 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:56:50.405Z,1538744210.405 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-05T12:56:50.789Z,1538744210.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:56:50.790Z,1538744210.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:56:50.791Z,1538744210.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:56:50.792Z,1538744210.792 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:56:50.797Z,1538744210.797 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:56:50.798Z,1538744210.798 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:56:53.123Z,1538744213.123 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T12:56:53.123Z,1538744213.123 [NAL9602] Data Fault, FailCount= 3
2018-10-05T12:56:53.123Z,1538744213.123 [NAL9602](ERROR): Data Fault
2018-10-05T12:56:53.225Z,1538744213.225 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T12:56:53.519Z,1538744213.519 [NAL9602](INFO): Powering down
2018-10-05T12:56:54.390Z,1538744214.390 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T12:56:54.390Z,1538744214.390 [NAL9602] No Fault, FailCount= 3
2018-10-05T12:57:20.749Z,1538744240.749 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T12:52:18.7Z
2018-10-05T12:57:20.749Z,1538744240.749 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T12:57:20.749Z,1538744240.749 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T12:57:26.012Z,1538744246.012 [NAL9602](INFO): Powering up NAL9602
2018-10-05T12:57:28.922Z,1538744248.922 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0571.lzma
2018-10-05T12:57:29.761Z,1538744249.761 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0571.lzma.bak
2018-10-05T12:57:29.761Z,1538744249.761 [DataOverHttps](INFO): SBD MOMSN=8611729
2018-10-05T12:57:38.784Z,1538744258.784 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0572.lzma
2018-10-05T12:57:39.148Z,1538744259.148 [NAL9602](INFO): NAL9602 initialized
2018-10-05T12:57:39.534Z,1538744259.534 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0572.lzma.bak
2018-10-05T12:57:39.534Z,1538744259.534 [DataOverHttps](INFO): SBD MOMSN=8611731
2018-10-05T12:57:40.514Z,1538744260.514 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T12:57:40.515Z,1538744260.515 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T12:57:40.515Z,1538744260.515 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T12:59:51.023Z,1538744391.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:59:51.023Z,1538744391.023 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-10-05T12:59:51.023Z,1538744391.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T12:59:51.025Z,1538744391.025 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T12:59:51.025Z,1538744391.025 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-10-05T12:59:51.025Z,1538744391.025 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T12:59:51.038Z,1538744391.038 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T12:59:51.039Z,1538744391.039 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T12:59:51.424Z,1538744391.424 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T12:59:51.424Z,1538744391.424 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-10-05T12:59:51.425Z,1538744391.425 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T12:59:51.425Z,1538744391.425 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-10-05T12:59:51.806Z,1538744391.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T12:59:51.807Z,1538744391.807 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:59:51.807Z,1538744391.807 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T12:59:51.807Z,1538744391.807 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T12:59:51.808Z,1538744391.808 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T12:59:51.808Z,1538744391.808 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:02:04.048Z,1538744524.048 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T13:02:04.048Z,1538744524.048 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-3276,V
2018-10-05T13:02:28.911Z,1538744548.911 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-05T13:02:40.946Z,1538744560.946 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T13:02:40.946Z,1538744560.946 [Default:CheckIn:C.Wait] Stopped
2018-10-05T13:02:40.946Z,1538744560.946 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T13:02:40.946Z,1538744560.946 [Default:CheckIn:D] Running Loop=1
2018-10-05T13:02:41.305Z,1538744561.305 [Default:CheckIn:D] Stopped
2018-10-05T13:02:41.305Z,1538744561.305 [Default:CheckIn:E] Running Loop=1
2018-10-05T13:02:41.707Z,1538744561.707 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1966.225651 min 
2018-10-05T13:02:41.707Z,1538744561.707 [Default:CheckIn:E] Stopped
2018-10-05T13:02:41.707Z,1538744561.707 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T13:02:41.707Z,1538744561.707 [Default:CheckIn] Stopped
2018-10-05T13:02:41.707Z,1538744561.707 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T13:02:41.708Z,1538744561.708 [Default:CheckIn](INFO): Running loop #191
2018-10-05T13:02:41.708Z,1538744561.708 [Default:CheckIn] Running Loop=191
2018-10-05T13:02:41.708Z,1538744561.708 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T13:02:41.708Z,1538744561.708 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T13:02:52.133Z,1538744572.133 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:02:52.133Z,1538744572.133 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-10-05T13:02:52.134Z,1538744572.134 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:02:52.135Z,1538744572.135 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:02:52.135Z,1538744572.135 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-10-05T13:02:52.136Z,1538744572.136 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:02:52.172Z,1538744572.172 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:02:52.173Z,1538744572.173 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:02:52.542Z,1538744572.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:02:52.542Z,1538744572.542 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-10-05T13:02:52.543Z,1538744572.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:02:52.543Z,1538744572.543 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-10-05T13:02:52.926Z,1538744572.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:02:52.926Z,1538744572.926 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:02:52.927Z,1538744572.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:02:52.927Z,1538744572.927 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:02:52.927Z,1538744572.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:02:52.928Z,1538744572.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:05:52.944Z,1538744752.944 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:05:52.944Z,1538744752.944 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-10-05T13:05:52.944Z,1538744752.944 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:05:52.948Z,1538744752.948 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:05:52.948Z,1538744752.948 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-10-05T13:05:52.948Z,1538744752.948 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:05:52.996Z,1538744752.996 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:05:52.996Z,1538744752.996 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:05:53.376Z,1538744753.376 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:05:53.376Z,1538744753.376 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-10-05T13:05:53.381Z,1538744753.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:05:53.381Z,1538744753.381 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-10-05T13:05:53.759Z,1538744753.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:05:53.759Z,1538744753.759 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:05:53.760Z,1538744753.760 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:05:53.760Z,1538744753.760 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:05:53.760Z,1538744753.760 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:05:53.761Z,1538744753.761 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:06:41.988Z,1538744801.988 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T13:06:41.988Z,1538744801.988 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00 +0.00,21956.42
2018-10-05T13:07:40.463Z,1538744860.463 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T13:07:40.463Z,1538744860.463 [NAL9602] Data Fault, FailCount= 4
2018-10-05T13:07:40.463Z,1538744860.463 [NAL9602](ERROR): Data Fault
2018-10-05T13:07:40.538Z,1538744860.538 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T13:07:40.867Z,1538744860.867 [NAL9602](INFO): Powering down
2018-10-05T13:07:44.528Z,1538744864.528 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T13:02:41.7Z
2018-10-05T13:07:44.528Z,1538744864.528 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T13:07:44.528Z,1538744864.528 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T13:07:44.563Z,1538744864.563 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T13:07:44.564Z,1538744864.564 [NAL9602] No Fault, FailCount= 4
2018-10-05T13:07:49.507Z,1538744869.507 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0574.lzma
2018-10-05T13:07:50.282Z,1538744870.282 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0574.lzma.bak
2018-10-05T13:07:50.282Z,1538744870.282 [DataOverHttps](INFO): SBD MOMSN=8611735
2018-10-05T13:07:59.958Z,1538744879.958 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0575.lzma
2018-10-05T13:08:00.730Z,1538744880.730 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0575.lzma.bak
2018-10-05T13:08:00.731Z,1538744880.731 [DataOverHttps](INFO): SBD MOMSN=8611737
2018-10-05T13:08:01.672Z,1538744881.672 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T13:08:01.672Z,1538744881.672 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T13:08:01.672Z,1538744881.672 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T13:08:10.971Z,1538744890.971 [NAL9602](INFO): Powering up NAL9602
2018-10-05T13:08:21.771Z,1538744901.771 [NAL9602](INFO): NAL9602 initialized
2018-10-05T13:08:53.815Z,1538744933.815 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:08:53.815Z,1538744933.815 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-10-05T13:08:53.815Z,1538744933.815 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:08:53.817Z,1538744933.817 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:08:53.817Z,1538744933.817 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-10-05T13:08:53.817Z,1538744933.817 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:08:53.840Z,1538744933.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:08:53.840Z,1538744933.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:08:54.211Z,1538744934.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:08:54.211Z,1538744934.211 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-10-05T13:08:54.211Z,1538744934.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:08:54.211Z,1538744934.211 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-10-05T13:08:54.592Z,1538744934.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:08:54.597Z,1538744934.597 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:08:54.598Z,1538744934.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:08:54.599Z,1538744934.599 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:08:54.600Z,1538744934.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:08:54.600Z,1538744934.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:10:00.056Z,1538745000.056 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T13:10:00.057Z,1538745000.057 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-2768,-32768,-32768,V
2018-10-05T13:11:54.765Z,1538745114.765 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:11:54.766Z,1538745114.766 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-10-05T13:11:54.766Z,1538745114.766 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:11:54.767Z,1538745114.767 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:11:54.768Z,1538745114.768 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-10-05T13:11:54.768Z,1538745114.768 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:11:54.794Z,1538745114.794 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:11:54.794Z,1538745114.794 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:11:55.148Z,1538745115.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:11:55.148Z,1538745115.148 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-10-05T13:11:55.148Z,1538745115.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:11:55.148Z,1538745115.148 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-10-05T13:11:55.517Z,1538745115.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:11:55.518Z,1538745115.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:11:55.518Z,1538745115.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:11:55.519Z,1538745115.519 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:11:55.519Z,1538745115.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:11:55.519Z,1538745115.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:13:02.141Z,1538745182.141 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T13:13:02.141Z,1538745182.141 [Default:CheckIn:C.Wait] Stopped
2018-10-05T13:13:02.141Z,1538745182.141 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T13:13:02.141Z,1538745182.141 [Default:CheckIn:D] Running Loop=1
2018-10-05T13:13:02.505Z,1538745182.505 [Default:CheckIn:D] Stopped
2018-10-05T13:13:02.505Z,1538745182.505 [Default:CheckIn:E] Running Loop=1
2018-10-05T13:13:02.934Z,1538745182.934 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1976.578906 min 
2018-10-05T13:13:02.935Z,1538745182.935 [Default:CheckIn:E] Stopped
2018-10-05T13:13:02.935Z,1538745182.935 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T13:13:02.935Z,1538745182.935 [Default:CheckIn] Stopped
2018-10-05T13:13:02.936Z,1538745182.936 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T13:13:02.936Z,1538745182.936 [Default:CheckIn](INFO): Running loop #192
2018-10-05T13:13:02.936Z,1538745182.936 [Default:CheckIn] Running Loop=192
2018-10-05T13:13:02.936Z,1538745182.936 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T13:13:02.937Z,1538745182.937 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T13:13:53.372Z,1538745233.372 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.887,*-0.003,*0.000
2018-10-05T13:14:55.555Z,1538745295.555 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:14:55.555Z,1538745295.555 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-10-05T13:14:55.555Z,1538745295.555 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:14:55.562Z,1538745295.562 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:14:55.562Z,1538745295.562 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-10-05T13:14:55.562Z,1538745295.562 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:14:55.597Z,1538745295.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:14:55.598Z,1538745295.598 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:14:56.003Z,1538745296.003 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:14:56.003Z,1538745296.003 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-10-05T13:14:56.004Z,1538745296.004 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:14:56.004Z,1538745296.004 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-10-05T13:14:56.370Z,1538745296.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:14:56.370Z,1538745296.370 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:14:56.371Z,1538745296.371 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:14:56.371Z,1538745296.371 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:14:56.371Z,1538745296.371 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:14:56.372Z,1538745296.372 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:17:56.700Z,1538745476.700 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:17:56.700Z,1538745476.700 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-10-05T13:17:56.700Z,1538745476.700 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:17:56.726Z,1538745476.726 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:17:56.726Z,1538745476.726 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-10-05T13:17:56.726Z,1538745476.726 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:17:56.745Z,1538745476.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:17:56.745Z,1538745476.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:17:57.103Z,1538745477.103 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:17:57.103Z,1538745477.103 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-10-05T13:17:57.104Z,1538745477.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:17:57.104Z,1538745477.104 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-10-05T13:17:57.482Z,1538745477.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:17:57.482Z,1538745477.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:17:57.483Z,1538745477.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:17:57.483Z,1538745477.483 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:17:57.483Z,1538745477.483 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:17:57.484Z,1538745477.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:18:05.108Z,1538745485.108 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T13:13:02.9Z
2018-10-05T13:18:05.108Z,1538745485.108 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T13:18:05.108Z,1538745485.108 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T13:18:10.060Z,1538745490.060 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0577.lzma
2018-10-05T13:18:10.843Z,1538745490.843 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0577.lzma.bak
2018-10-05T13:18:10.844Z,1538745490.844 [DataOverHttps](INFO): SBD MOMSN=8611741
2018-10-05T13:18:20.182Z,1538745500.182 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20181004T041305/Express0578.lzma
2018-10-05T13:18:20.954Z,1538745500.954 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0578.lzma.bak
2018-10-05T13:18:20.954Z,1538745500.954 [DataOverHttps](INFO): SBD MOMSN=8611743
2018-10-05T13:18:21.900Z,1538745501.900 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T13:18:21.900Z,1538745501.900 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T13:18:21.900Z,1538745501.900 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T13:18:25.744Z,1538745505.744 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T13:18:25.744Z,1538745505.744 [NAL9602] Data Fault, FailCount= 5
2018-10-05T13:18:25.744Z,1538745505.744 [NAL9602](ERROR): Data Fault
2018-10-05T13:18:25.820Z,1538745505.820 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T13:18:25.825Z,1538745505.825 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T13:18:26.139Z,1538745506.139 [NAL9602](INFO): Powering down
2018-10-05T13:18:26.201Z,1538745506.201 [CBIT](INFO): Critical error at 20181005T131825
2018-10-05T13:20:26.110Z,1538745626.110 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T13:20:26.110Z,1538745626.110 [NAL9602] No Fault, FailCount= 5
2018-10-05T13:20:26.451Z,1538745626.451 [NAL9602](INFO): Powering up NAL9602
2018-10-05T13:20:37.251Z,1538745637.251 [NAL9602](INFO): NAL9602 initialized
2018-10-05T13:20:57.780Z,1538745657.780 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:20:57.780Z,1538745657.780 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-10-05T13:20:57.780Z,1538745657.780 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:20:57.782Z,1538745657.782 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:20:57.782Z,1538745657.782 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-10-05T13:20:57.782Z,1538745657.782 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:20:57.796Z,1538745657.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:20:57.796Z,1538745657.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:20:58.189Z,1538745658.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:20:58.189Z,1538745658.189 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-10-05T13:20:58.190Z,1538745658.190 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:20:58.190Z,1538745658.190 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-10-05T13:20:58.558Z,1538745658.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:20:58.558Z,1538745658.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:20:58.559Z,1538745658.559 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:20:58.559Z,1538745658.559 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:20:58.559Z,1538745658.559 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:20:58.560Z,1538745658.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:21:33.374Z,1538745693.374 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.894,*-0.002,*0.000
2018-10-05T13:23:22.279Z,1538745802.279 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T13:23:22.280Z,1538745802.280 [Default:CheckIn:C.Wait] Stopped
2018-10-05T13:23:22.280Z,1538745802.280 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T13:23:22.280Z,1538745802.280 [Default:CheckIn:D] Running Loop=1
2018-10-05T13:23:22.687Z,1538745802.687 [Default:CheckIn:D] Stopped
2018-10-05T13:23:22.687Z,1538745802.687 [Default:CheckIn:E] Running Loop=1
2018-10-05T13:23:23.087Z,1538745803.087 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1986.915365 min 
2018-10-05T13:23:23.087Z,1538745803.087 [Default:CheckIn:E] Stopped
2018-10-05T13:23:23.087Z,1538745803.087 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T13:23:23.087Z,1538745803.087 [Default:CheckIn] Stopped
2018-10-05T13:23:23.088Z,1538745803.088 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T13:23:23.088Z,1538745803.088 [Default:CheckIn](INFO): Running loop #193
2018-10-05T13:23:23.088Z,1538745803.088 [Default:CheckIn] Running Loop=193
2018-10-05T13:23:23.088Z,1538745803.088 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T13:23:23.088Z,1538745803.088 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T13:23:58.768Z,1538745838.768 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:23:58.768Z,1538745838.768 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-10-05T13:23:58.768Z,1538745838.768 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:23:58.770Z,1538745838.770 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:23:58.771Z,1538745838.771 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-10-05T13:23:58.771Z,1538745838.771 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:23:58.788Z,1538745838.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:23:58.788Z,1538745838.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:23:59.163Z,1538745839.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:23:59.163Z,1538745839.163 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-10-05T13:23:59.163Z,1538745839.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:23:59.163Z,1538745839.163 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-10-05T13:23:59.538Z,1538745839.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:23:59.539Z,1538745839.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:23:59.539Z,1538745839.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:23:59.540Z,1538745839.540 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:23:59.540Z,1538745839.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:23:59.540Z,1538745839.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:26:59.769Z,1538746019.769 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:26:59.769Z,1538746019.769 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-10-05T13:26:59.769Z,1538746019.769 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:26:59.771Z,1538746019.771 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:26:59.771Z,1538746019.771 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-10-05T13:26:59.771Z,1538746019.771 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:26:59.813Z,1538746019.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:26:59.813Z,1538746019.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:27:00.170Z,1538746020.170 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:27:00.170Z,1538746020.170 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-10-05T13:27:00.170Z,1538746020.170 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:27:00.170Z,1538746020.170 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-10-05T13:27:00.526Z,1538746020.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:27:00.526Z,1538746020.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:27:00.527Z,1538746020.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:27:00.527Z,1538746020.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:27:00.527Z,1538746020.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:27:00.528Z,1538746020.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:27:15.875Z,1538746035.875 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T13:28:25.202Z,1538746105.202 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T13:23:23.1Z
2018-10-05T13:28:25.202Z,1538746105.202 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T13:28:25.202Z,1538746105.202 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T13:28:30.286Z,1538746110.286 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0580.lzma
2018-10-05T13:28:31.054Z,1538746111.054 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0580.lzma.bak
2018-10-05T13:28:31.054Z,1538746111.054 [DataOverHttps](INFO): SBD MOMSN=8611746
2018-10-05T13:28:40.313Z,1538746120.313 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0581.lzma
2018-10-05T13:28:41.106Z,1538746121.106 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0581.lzma.bak
2018-10-05T13:28:41.106Z,1538746121.106 [DataOverHttps](INFO): SBD MOMSN=8611749
2018-10-05T13:28:42.082Z,1538746122.082 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T13:28:42.082Z,1538746122.082 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T13:28:42.082Z,1538746122.082 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T13:30:00.582Z,1538746200.582 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:30:00.583Z,1538746200.583 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-10-05T13:30:00.583Z,1538746200.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:30:00.584Z,1538746200.584 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:30:00.585Z,1538746200.585 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-10-05T13:30:00.585Z,1538746200.585 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:30:00.598Z,1538746200.598 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:30:00.599Z,1538746200.599 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:30:00.999Z,1538746200.999 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:30:00.999Z,1538746200.999 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-10-05T13:30:00.999Z,1538746200.999 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:30:00.000Z,1538746201.000 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-10-05T13:30:01.390Z,1538746201.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:30:01.390Z,1538746201.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:30:01.391Z,1538746201.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:30:01.391Z,1538746201.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:30:01.391Z,1538746201.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:30:01.392Z,1538746201.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:30:04.984Z,1538746204.984 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T13:30:04.985Z,1538746204.985 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100506350283,.11448.9,  0
2018-10-05T13:30:39.471Z,1538746239.471 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T13:30:39.471Z,1538746239.471 [NAL9602] Data Fault, FailCount= 1
2018-10-05T13:30:39.471Z,1538746239.471 [NAL9602](ERROR): Data Fault
2018-10-05T13:30:39.533Z,1538746239.533 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T13:30:39.867Z,1538746239.867 [NAL9602](INFO): Powering down
2018-10-05T13:30:40.762Z,1538746240.762 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T13:30:40.762Z,1538746240.762 [NAL9602] No Fault, FailCount= 1
2018-10-05T13:31:09.963Z,1538746269.963 [NAL9602](INFO): Powering up NAL9602
2018-10-05T13:31:21.183Z,1538746281.183 [NAL9602](INFO): NAL9602 initialized
2018-10-05T13:31:28.851Z,1538746288.851 [RDI_Pathfinder](ERROR): Failed to parse:
0e8c,0f47, -0.003, 0.000
2018-10-05T13:32:48.635Z,1538746368.635 [RDI_Pathfinder](ERROR): only read 1 of 1 data item for altitude
2018-10-05T13:32:48.635Z,1538746368.635 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,,0ff4, -0.002, 0.000
2018-10-05T13:33:01.514Z,1538746381.514 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:33:01.514Z,1538746381.514 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-10-05T13:33:01.514Z,1538746381.514 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:33:01.516Z,1538746381.516 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:33:01.516Z,1538746381.516 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-10-05T13:33:01.516Z,1538746381.516 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:33:01.550Z,1538746381.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:33:01.551Z,1538746381.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:33:01.971Z,1538746381.971 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:33:01.971Z,1538746381.971 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-10-05T13:33:01.972Z,1538746381.972 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:33:01.972Z,1538746381.972 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-10-05T13:33:02.312Z,1538746382.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:33:02.329Z,1538746382.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:33:02.330Z,1538746382.330 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:33:02.330Z,1538746382.330 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:33:02.331Z,1538746382.331 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:33:02.331Z,1538746382.331 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:33:42.438Z,1538746422.438 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T13:33:42.438Z,1538746422.438 [Default:CheckIn:C.Wait] Stopped
2018-10-05T13:33:42.438Z,1538746422.438 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T13:33:42.438Z,1538746422.438 [Default:CheckIn:D] Running Loop=1
2018-10-05T13:33:42.857Z,1538746422.857 [Default:CheckIn:D] Stopped
2018-10-05T13:33:42.857Z,1538746422.857 [Default:CheckIn:E] Running Loop=1
2018-10-05T13:33:43.265Z,1538746423.265 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1997.251432 min 
2018-10-05T13:33:43.265Z,1538746423.265 [Default:CheckIn:E] Stopped
2018-10-05T13:33:43.265Z,1538746423.265 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T13:33:43.265Z,1538746423.265 [Default:CheckIn] Stopped
2018-10-05T13:33:43.266Z,1538746423.266 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T13:33:43.266Z,1538746423.266 [Default:CheckIn](INFO): Running loop #194
2018-10-05T13:33:43.266Z,1538746423.266 [Default:CheckIn] Running Loop=194
2018-10-05T13:33:43.266Z,1538746423.266 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T13:33:43.266Z,1538746423.266 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T13:36:02.439Z,1538746562.439 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:36:02.440Z,1538746562.440 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-10-05T13:36:02.440Z,1538746562.440 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:36:02.446Z,1538746562.446 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:36:02.446Z,1538746562.446 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-10-05T13:36:02.446Z,1538746562.446 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:36:02.484Z,1538746562.484 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:36:02.484Z,1538746562.484 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:36:02.853Z,1538746562.853 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:36:02.853Z,1538746562.853 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-10-05T13:36:02.854Z,1538746562.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:36:02.854Z,1538746562.854 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-10-05T13:36:03.234Z,1538746563.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:36:03.234Z,1538746563.234 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:36:03.234Z,1538746563.234 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:36:03.235Z,1538746563.235 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:36:03.235Z,1538746563.235 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:36:03.236Z,1538746563.236 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:38:45.596Z,1538746725.596 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T13:33:43.3Z
2018-10-05T13:38:45.596Z,1538746725.596 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T13:38:45.596Z,1538746725.596 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T13:38:46.896Z,1538746726.896 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T13:38:50.522Z,1538746730.522 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0583.lzma
2018-10-05T13:38:51.286Z,1538746731.286 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0583.lzma.bak
2018-10-05T13:38:51.286Z,1538746731.286 [DataOverHttps](INFO): SBD MOMSN=8611753
2018-10-05T13:38:56.903Z,1538746736.903 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-05T13:39:00.543Z,1538746740.543 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0584.lzma
2018-10-05T13:39:01.306Z,1538746741.306 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0584.lzma.bak
2018-10-05T13:39:01.306Z,1538746741.306 [DataOverHttps](INFO): SBD MOMSN=8611755
2018-10-05T13:39:02.310Z,1538746742.310 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T13:39:02.310Z,1538746742.310 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T13:39:02.310Z,1538746742.310 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T13:39:05.618Z,1538746745.618 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:39:05.619Z,1538746745.619 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-10-05T13:39:05.619Z,1538746745.619 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:39:05.620Z,1538746745.620 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:39:05.621Z,1538746745.621 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-10-05T13:39:05.621Z,1538746745.621 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:39:05.638Z,1538746745.638 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:39:05.638Z,1538746745.638 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:39:05.774Z,1538746745.774 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:39:05.774Z,1538746745.774 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-10-05T13:39:05.775Z,1538746745.775 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:39:05.775Z,1538746745.775 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-10-05T13:39:06.106Z,1538746746.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:39:06.106Z,1538746746.106 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:39:06.107Z,1538746746.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:39:06.107Z,1538746746.107 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:39:06.107Z,1538746746.107 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:39:06.108Z,1538746746.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:41:22.006Z,1538746882.006 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T13:41:22.006Z,1538746882.006 [NAL9602] Data Fault, FailCount= 2
2018-10-05T13:41:22.006Z,1538746882.006 [NAL9602](ERROR): Data Fault
2018-10-05T13:41:22.163Z,1538746882.163 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T13:41:22.391Z,1538746882.391 [NAL9602](INFO): Powering down
2018-10-05T13:41:23.336Z,1538746883.336 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T13:41:23.336Z,1538746883.336 [NAL9602] No Fault, FailCount= 2
2018-10-05T13:41:52.699Z,1538746912.699 [NAL9602](INFO): Powering up NAL9602
2018-10-05T13:42:03.229Z,1538746923.229 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-05T13:42:03.607Z,1538746923.607 [NAL9602](INFO): NAL9602 initialized
2018-10-05T13:42:06.439Z,1538746926.439 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:42:06.440Z,1538746926.440 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-10-05T13:42:06.440Z,1538746926.440 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:42:06.442Z,1538746926.442 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:42:06.442Z,1538746926.442 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-10-05T13:42:06.442Z,1538746926.442 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:42:06.455Z,1538746926.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:42:06.455Z,1538746926.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:42:06.880Z,1538746926.880 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:42:06.880Z,1538746926.880 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-10-05T13:42:06.885Z,1538746926.885 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:42:06.885Z,1538746926.885 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-10-05T13:42:07.242Z,1538746927.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:42:07.242Z,1538746927.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:42:07.243Z,1538746927.243 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:42:07.243Z,1538746927.243 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:42:07.243Z,1538746927.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:42:07.244Z,1538746927.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:44:02.673Z,1538747042.673 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T13:44:02.673Z,1538747042.673 [Default:CheckIn:C.Wait] Stopped
2018-10-05T13:44:02.674Z,1538747042.674 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T13:44:02.674Z,1538747042.674 [Default:CheckIn:D] Running Loop=1
2018-10-05T13:44:03.091Z,1538747043.091 [Default:CheckIn:D] Stopped
2018-10-05T13:44:03.091Z,1538747043.091 [Default:CheckIn:E] Running Loop=1
2018-10-05T13:44:03.485Z,1538747043.485 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2007.588672 min 
2018-10-05T13:44:03.485Z,1538747043.485 [Default:CheckIn:E] Stopped
2018-10-05T13:44:03.486Z,1538747043.486 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T13:44:03.486Z,1538747043.486 [Default:CheckIn] Stopped
2018-10-05T13:44:03.486Z,1538747043.486 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T13:44:03.486Z,1538747043.486 [Default:CheckIn](INFO): Running loop #195
2018-10-05T13:44:03.486Z,1538747043.486 [Default:CheckIn] Running Loop=195
2018-10-05T13:44:03.486Z,1538747043.486 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T13:44:03.486Z,1538747043.486 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T13:45:07.337Z,1538747107.337 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:45:07.337Z,1538747107.337 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-10-05T13:45:07.337Z,1538747107.337 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:45:07.339Z,1538747107.339 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:45:07.340Z,1538747107.340 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-10-05T13:45:07.340Z,1538747107.340 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:45:07.365Z,1538747107.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:45:07.365Z,1538747107.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:45:07.768Z,1538747107.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:45:07.768Z,1538747107.768 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-10-05T13:45:07.768Z,1538747107.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:45:07.768Z,1538747107.768 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-10-05T13:45:08.130Z,1538747108.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:45:08.130Z,1538747108.130 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:45:08.131Z,1538747108.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:45:08.131Z,1538747108.131 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:45:08.132Z,1538747108.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:45:08.132Z,1538747108.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:47:20.922Z,1538747240.922 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T13:48:08.251Z,1538747288.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:48:08.251Z,1538747288.251 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-10-05T13:48:08.251Z,1538747288.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:48:08.257Z,1538747288.257 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:48:08.257Z,1538747288.257 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-10-05T13:48:08.257Z,1538747288.257 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:48:08.279Z,1538747288.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:48:08.279Z,1538747288.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:48:08.699Z,1538747288.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:48:08.700Z,1538747288.700 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-10-05T13:48:08.700Z,1538747288.700 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:48:08.700Z,1538747288.700 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-10-05T13:48:09.055Z,1538747289.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:48:09.055Z,1538747289.055 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:48:09.056Z,1538747289.056 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:48:09.056Z,1538747289.056 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:48:09.056Z,1538747289.056 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:48:09.057Z,1538747289.057 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:49:05.574Z,1538747345.574 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T13:44:03.5Z
2018-10-05T13:49:05.574Z,1538747345.574 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T13:49:05.574Z,1538747345.574 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T13:49:06.871Z,1538747346.871 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.887, -0.010, 0.000
2018-10-05T13:49:10.549Z,1538747350.549 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0586.lzma
2018-10-05T13:49:11.327Z,1538747351.327 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0586.lzma.bak
2018-10-05T13:49:11.327Z,1538747351.327 [DataOverHttps](INFO): SBD MOMSN=8611759
2018-10-05T13:49:20.565Z,1538747360.565 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20181004T041305/Express0587.lzma
2018-10-05T13:49:21.342Z,1538747361.342 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0587.lzma.bak
2018-10-05T13:49:21.342Z,1538747361.342 [DataOverHttps](INFO): SBD MOMSN=8611761
2018-10-05T13:49:22.321Z,1538747362.321 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T13:49:22.321Z,1538747362.321 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T13:49:22.322Z,1538747362.322 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T13:51:11.900Z,1538747471.900 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:51:11.901Z,1538747471.901 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-10-05T13:51:11.901Z,1538747471.901 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:51:11.905Z,1538747471.905 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:51:11.906Z,1538747471.906 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-10-05T13:51:11.906Z,1538747471.906 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:51:11.946Z,1538747471.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:51:11.947Z,1538747471.947 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:51:12.055Z,1538747472.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:51:12.055Z,1538747472.055 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-10-05T13:51:12.055Z,1538747472.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:51:12.056Z,1538747472.056 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-10-05T13:51:12.406Z,1538747472.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:51:12.407Z,1538747472.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:51:12.407Z,1538747472.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:51:12.407Z,1538747472.407 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:51:12.408Z,1538747472.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:51:12.408Z,1538747472.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:51:13.214Z,1538747473.214 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T13:52:04.889Z,1538747524.889 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T13:52:04.889Z,1538747524.889 [NAL9602] Data Fault, FailCount= 3
2018-10-05T13:52:04.889Z,1538747524.889 [NAL9602](ERROR): Data Fault
2018-10-05T13:52:04.978Z,1538747524.978 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T13:52:05.288Z,1538747525.288 [NAL9602](INFO): Powering down
2018-10-05T13:52:06.144Z,1538747526.144 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T13:52:06.144Z,1538747526.144 [NAL9602] No Fault, FailCount= 3
2018-10-05T13:52:35.355Z,1538747555.355 [NAL9602](INFO): Powering up NAL9602
2018-10-05T13:52:46.563Z,1538747566.563 [NAL9602](INFO): NAL9602 initialized
2018-10-05T13:54:12.487Z,1538747652.487 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:54:12.487Z,1538747652.487 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-10-05T13:54:12.487Z,1538747652.487 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:54:12.493Z,1538747652.493 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:54:12.493Z,1538747652.493 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-10-05T13:54:12.493Z,1538747652.493 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:54:12.515Z,1538747652.515 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:54:12.515Z,1538747652.515 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:54:12.933Z,1538747652.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:54:12.933Z,1538747652.933 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-10-05T13:54:12.934Z,1538747652.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:54:12.934Z,1538747652.934 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-10-05T13:54:13.321Z,1538747653.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:54:13.322Z,1538747653.322 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:54:13.322Z,1538747653.322 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:54:13.322Z,1538747653.322 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:54:13.323Z,1538747653.323 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:54:13.323Z,1538747653.323 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:54:22.501Z,1538747662.501 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T13:54:22.502Z,1538747662.502 [Default:CheckIn:C.Wait] Stopped
2018-10-05T13:54:22.503Z,1538747662.503 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T13:54:22.503Z,1538747662.503 [Default:CheckIn:D] Running Loop=1
2018-10-05T13:54:22.930Z,1538747662.930 [Default:CheckIn:D] Stopped
2018-10-05T13:54:22.931Z,1538747662.931 [Default:CheckIn:E] Running Loop=1
2018-10-05T13:54:23.310Z,1538747663.310 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2017.919401 min 
2018-10-05T13:54:23.311Z,1538747663.311 [Default:CheckIn:E] Stopped
2018-10-05T13:54:23.311Z,1538747663.311 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T13:54:23.311Z,1538747663.311 [Default:CheckIn] Stopped
2018-10-05T13:54:23.311Z,1538747663.311 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T13:54:23.311Z,1538747663.311 [Default:CheckIn](INFO): Running loop #196
2018-10-05T13:54:23.311Z,1538747663.311 [Default:CheckIn] Running Loop=196
2018-10-05T13:54:23.311Z,1538747663.311 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T13:54:23.312Z,1538747663.312 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T13:54:48.596Z,1538747688.596 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T13:54:48.596Z,1538747688.596 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.008
2018-10-05T13:56:32.711Z,1538747792.711 [RDI_Pathfinder](ERROR): Failed to parse:
:e8c,0ffe, 15.887, -0.007, 0.000
2018-10-05T13:57:13.419Z,1538747833.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:57:13.419Z,1538747833.419 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-10-05T13:57:13.419Z,1538747833.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T13:57:13.425Z,1538747833.425 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T13:57:13.425Z,1538747833.425 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-10-05T13:57:13.426Z,1538747833.426 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T13:57:13.447Z,1538747833.447 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T13:57:13.447Z,1538747833.447 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T13:57:13.853Z,1538747833.853 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T13:57:13.853Z,1538747833.853 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-10-05T13:57:13.854Z,1538747833.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T13:57:13.854Z,1538747833.854 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-10-05T13:57:14.220Z,1538747834.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T13:57:14.221Z,1538747834.221 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:57:14.221Z,1538747834.221 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:57:14.222Z,1538747834.222 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T13:57:14.222Z,1538747834.222 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T13:57:14.222Z,1538747834.222 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T13:59:25.971Z,1538747965.971 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T13:54:23.3Z
2018-10-05T13:59:25.971Z,1538747965.971 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T13:59:25.971Z,1538747965.971 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T13:59:31.107Z,1538747971.107 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0589.lzma
2018-10-05T13:59:31.899Z,1538747971.899 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0589.lzma.bak
2018-10-05T13:59:31.899Z,1538747971.899 [DataOverHttps](INFO): SBD MOMSN=8611765
2018-10-05T13:59:41.265Z,1538747981.265 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0590.lzma
2018-10-05T13:59:42.030Z,1538747982.030 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0590.lzma.bak
2018-10-05T13:59:42.030Z,1538747982.030 [DataOverHttps](INFO): SBD MOMSN=8611767
2018-10-05T13:59:43.029Z,1538747983.029 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T13:59:43.029Z,1538747983.029 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T13:59:43.029Z,1538747983.029 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T14:00:14.595Z,1538748014.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:00:14.595Z,1538748014.595 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-10-05T14:00:14.595Z,1538748014.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:00:14.601Z,1538748014.601 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:00:14.609Z,1538748014.609 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-10-05T14:00:14.609Z,1538748014.609 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:00:14.638Z,1538748014.638 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:00:14.639Z,1538748014.639 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:00:14.990Z,1538748014.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:00:14.990Z,1538748014.990 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-10-05T14:00:14.991Z,1538748014.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:00:14.991Z,1538748014.991 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-10-05T14:00:15.371Z,1538748015.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:00:15.372Z,1538748015.372 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:00:15.372Z,1538748015.372 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:00:15.373Z,1538748015.373 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:00:15.373Z,1538748015.373 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:00:15.374Z,1538748015.374 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:02:43.880Z,1538748163.880 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.880,*-0.002,*0.000
2018-10-05T14:02:49.015Z,1538748169.015 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T14:02:49.015Z,1538748169.015 [NAL9602] Data Fault, FailCount= 4
2018-10-05T14:02:49.015Z,1538748169.015 [NAL9602](ERROR): Data Fault
2018-10-05T14:02:49.081Z,1538748169.081 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T14:02:49.415Z,1538748169.415 [NAL9602](INFO): Powering down
2018-10-05T14:02:50.280Z,1538748170.280 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T14:02:50.280Z,1538748170.280 [NAL9602] No Fault, FailCount= 4
2018-10-05T14:03:18.303Z,1538748198.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:03:18.303Z,1538748198.303 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-10-05T14:03:18.303Z,1538748198.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:03:18.309Z,1538748198.309 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:03:18.312Z,1538748198.312 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-10-05T14:03:18.312Z,1538748198.312 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:03:18.342Z,1538748198.342 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:03:18.342Z,1538748198.342 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:03:18.459Z,1538748198.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:03:18.459Z,1538748198.459 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-10-05T14:03:18.460Z,1538748198.460 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:03:18.460Z,1538748198.460 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-10-05T14:03:18.812Z,1538748198.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:03:18.813Z,1538748198.813 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:03:18.813Z,1538748198.813 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:03:18.814Z,1538748198.814 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:03:18.814Z,1538748198.814 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:03:18.814Z,1538748198.814 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:03:19.567Z,1538748199.567 [NAL9602](INFO): Powering up NAL9602
2018-10-05T14:03:29.619Z,1538748209.619 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T14:03:29.619Z,1538748209.619 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100507082783,35.0, -.0,1448.9,  0
2018-10-05T14:03:30.363Z,1538748210.363 [NAL9602](INFO): NAL9602 initialized
2018-10-05T14:03:43.632Z,1538748223.632 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T14:04:43.420Z,1538748283.420 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T14:04:43.425Z,1538748283.425 [Default:CheckIn:C.Wait] Stopped
2018-10-05T14:04:43.425Z,1538748283.425 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T14:04:43.425Z,1538748283.425 [Default:CheckIn:D] Running Loop=1
2018-10-05T14:04:43.841Z,1538748283.841 [Default:CheckIn:D] Stopped
2018-10-05T14:04:43.841Z,1538748283.841 [Default:CheckIn:E] Running Loop=1
2018-10-05T14:04:44.237Z,1538748284.237 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2028.267839 min 
2018-10-05T14:04:44.238Z,1538748284.238 [Default:CheckIn:E] Stopped
2018-10-05T14:04:44.238Z,1538748284.238 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T14:04:44.238Z,1538748284.238 [Default:CheckIn] Stopped
2018-10-05T14:04:44.238Z,1538748284.238 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T14:04:44.238Z,1538748284.238 [Default:CheckIn](INFO): Running loop #197
2018-10-05T14:04:44.238Z,1538748284.238 [Default:CheckIn] Running Loop=197
2018-10-05T14:04:44.239Z,1538748284.239 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T14:04:44.239Z,1538748284.239 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T14:06:18.867Z,1538748378.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:06:18.867Z,1538748378.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-10-05T14:06:18.867Z,1538748378.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:06:18.885Z,1538748378.885 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:06:18.886Z,1538748378.886 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-10-05T14:06:18.886Z,1538748378.886 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:06:18.915Z,1538748378.915 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:06:18.916Z,1538748378.916 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:06:19.267Z,1538748379.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:06:19.267Z,1538748379.267 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-10-05T14:06:19.267Z,1538748379.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:06:19.268Z,1538748379.268 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-10-05T14:06:19.682Z,1538748379.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:06:19.682Z,1538748379.682 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:06:19.683Z,1538748379.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:06:19.683Z,1538748379.683 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:06:19.684Z,1538748379.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:06:19.684Z,1538748379.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:07:50.730Z,1538748470.730 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T14:07:50.731Z,1538748470.731 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-3768,-32768,V
2018-10-05T14:09:19.832Z,1538748559.832 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:09:19.832Z,1538748559.832 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-10-05T14:09:19.832Z,1538748559.832 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:09:19.838Z,1538748559.838 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:09:19.838Z,1538748559.838 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-10-05T14:09:19.839Z,1538748559.839 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:09:19.864Z,1538748559.864 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:09:19.864Z,1538748559.864 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:09:20.263Z,1538748560.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:09:20.263Z,1538748560.263 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-10-05T14:09:20.263Z,1538748560.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:09:20.263Z,1538748560.263 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-10-05T14:09:20.634Z,1538748560.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:09:20.634Z,1538748560.634 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:09:20.635Z,1538748560.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:09:20.635Z,1538748560.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:09:20.635Z,1538748560.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:09:20.636Z,1538748560.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:09:46.627Z,1538748586.627 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T14:04:44.2Z
2018-10-05T14:09:46.628Z,1538748586.628 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T14:09:46.628Z,1538748586.628 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T14:09:51.550Z,1538748591.550 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0592.lzma
2018-10-05T14:09:52.341Z,1538748592.341 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0592.lzma.bak
2018-10-05T14:09:52.341Z,1538748592.341 [DataOverHttps](INFO): SBD MOMSN=8611771
2018-10-05T14:10:01.577Z,1538748601.577 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0593.lzma
2018-10-05T14:10:02.358Z,1538748602.358 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0593.lzma.bak
2018-10-05T14:10:02.365Z,1538748602.365 [DataOverHttps](INFO): SBD MOMSN=8611773
2018-10-05T14:10:03.338Z,1538748603.338 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T14:10:03.338Z,1538748603.338 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T14:10:03.338Z,1538748603.338 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T14:10:33.561Z,1538748633.561 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T14:10:33.561Z,1538748633.561 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-2768,V
2018-10-05T14:12:21.047Z,1538748741.047 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:12:21.047Z,1538748741.047 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-10-05T14:12:21.047Z,1538748741.047 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:12:21.049Z,1538748741.049 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:12:21.049Z,1538748741.049 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-10-05T14:12:21.049Z,1538748741.049 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:12:21.079Z,1538748741.079 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:12:21.079Z,1538748741.079 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:12:21.462Z,1538748741.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:12:21.462Z,1538748741.462 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-10-05T14:12:21.463Z,1538748741.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:12:21.463Z,1538748741.463 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-10-05T14:12:21.846Z,1538748741.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:12:21.846Z,1538748741.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:12:21.847Z,1538748741.847 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:12:21.847Z,1538748741.847 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:12:21.847Z,1538748741.847 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:12:21.848Z,1538748741.848 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:13:32.415Z,1538748812.415 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T14:13:32.415Z,1538748812.415 [NAL9602] Data Fault, FailCount= 5
2018-10-05T14:13:32.415Z,1538748812.415 [NAL9602](ERROR): Data Fault
2018-10-05T14:13:32.475Z,1538748812.475 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T14:13:32.476Z,1538748812.476 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T14:13:32.799Z,1538748812.799 [NAL9602](INFO): Powering down
2018-10-05T14:13:32.869Z,1538748812.869 [CBIT](INFO): Critical error at 20181005T141332
2018-10-05T14:15:03.874Z,1538748903.874 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T14:15:03.874Z,1538748903.874 [Default:CheckIn:C.Wait] Stopped
2018-10-05T14:15:03.874Z,1538748903.874 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T14:15:03.874Z,1538748903.874 [Default:CheckIn:D] Running Loop=1
2018-10-05T14:15:04.249Z,1538748904.249 [Default:CheckIn:D] Stopped
2018-10-05T14:15:04.249Z,1538748904.249 [Default:CheckIn:E] Running Loop=1
2018-10-05T14:15:04.661Z,1538748904.661 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2038.608073 min 
2018-10-05T14:15:04.661Z,1538748904.661 [Default:CheckIn:E] Stopped
2018-10-05T14:15:04.661Z,1538748904.661 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T14:15:04.662Z,1538748904.662 [Default:CheckIn] Stopped
2018-10-05T14:15:04.662Z,1538748904.662 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T14:15:04.662Z,1538748904.662 [Default:CheckIn](INFO): Running loop #198
2018-10-05T14:15:04.662Z,1538748904.662 [Default:CheckIn] Running Loop=198
2018-10-05T14:15:04.662Z,1538748904.662 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T14:15:04.662Z,1538748904.662 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T14:15:24.264Z,1538748924.264 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:15:24.264Z,1538748924.264 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-10-05T14:15:24.264Z,1538748924.264 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:15:24.266Z,1538748924.266 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:15:24.266Z,1538748924.266 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-10-05T14:15:24.266Z,1538748924.266 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:15:24.304Z,1538748924.304 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:15:24.305Z,1538748924.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:15:24.411Z,1538748924.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:15:24.411Z,1538748924.411 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-10-05T14:15:24.411Z,1538748924.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:15:24.412Z,1538748924.412 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-10-05T14:15:24.780Z,1538748924.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:15:24.780Z,1538748924.780 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:15:24.781Z,1538748924.781 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:15:24.781Z,1538748924.781 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:15:24.782Z,1538748924.782 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:15:24.782Z,1538748924.782 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:15:32.788Z,1538748932.788 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T14:15:32.788Z,1538748932.788 [NAL9602] No Fault, FailCount= 5
2018-10-05T14:15:33.139Z,1538748933.139 [NAL9602](INFO): Powering up NAL9602
2018-10-05T14:15:44.339Z,1538748944.339 [NAL9602](INFO): NAL9602 initialized
2018-10-05T14:16:00.868Z,1538748960.868 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T14:18:24.879Z,1538749104.879 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:18:24.879Z,1538749104.879 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-10-05T14:18:24.880Z,1538749104.880 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:18:24.882Z,1538749104.882 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:18:24.882Z,1538749104.882 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-10-05T14:18:24.882Z,1538749104.882 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:18:24.907Z,1538749104.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:18:24.908Z,1538749104.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:18:25.287Z,1538749105.287 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:18:25.287Z,1538749105.287 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-10-05T14:18:25.288Z,1538749105.288 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:18:25.288Z,1538749105.288 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-10-05T14:18:25.687Z,1538749105.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:18:25.687Z,1538749105.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:18:25.688Z,1538749105.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:18:25.688Z,1538749105.688 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:18:25.688Z,1538749105.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:18:25.693Z,1538749105.693 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:18:42.887Z,1538749122.887 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T14:18:42.887Z,1538749122.887 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100507234083,35.0, -0.1,   0.0,14
2018-10-05T14:20:06.642Z,1538749206.642 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T14:15:04.7Z
2018-10-05T14:20:06.642Z,1538749206.642 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T14:20:06.643Z,1538749206.643 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T14:20:11.563Z,1538749211.563 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0595.lzma
2018-10-05T14:20:12.342Z,1538749212.342 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0595.lzma.bak
2018-10-05T14:20:12.342Z,1538749212.342 [DataOverHttps](INFO): SBD MOMSN=8611777
2018-10-05T14:20:21.569Z,1538749221.569 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0596.lzma
2018-10-05T14:20:22.342Z,1538749222.342 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0596.lzma.bak
2018-10-05T14:20:22.342Z,1538749222.342 [DataOverHttps](INFO): SBD MOMSN=8611780
2018-10-05T14:20:23.326Z,1538749223.326 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T14:20:23.326Z,1538749223.326 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T14:20:23.326Z,1538749223.326 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T14:20:37.549Z,1538749237.549 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-05T14:21:26.064Z,1538749286.064 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:21:26.064Z,1538749286.064 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-10-05T14:21:26.064Z,1538749286.064 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:21:26.071Z,1538749286.071 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:21:26.071Z,1538749286.071 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-10-05T14:21:26.071Z,1538749286.071 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:21:26.119Z,1538749286.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:21:26.120Z,1538749286.120 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:21:26.482Z,1538749286.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:21:26.482Z,1538749286.482 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-10-05T14:21:26.483Z,1538749286.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:21:26.484Z,1538749286.484 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-10-05T14:21:26.847Z,1538749286.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:21:26.848Z,1538749286.848 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:21:26.848Z,1538749286.848 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:21:26.853Z,1538749286.853 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:21:26.853Z,1538749286.853 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:21:26.854Z,1538749286.854 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:24:27.048Z,1538749467.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:24:27.048Z,1538749467.048 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-10-05T14:24:27.048Z,1538749467.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:24:27.050Z,1538749467.050 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:24:27.051Z,1538749467.051 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-10-05T14:24:27.051Z,1538749467.051 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:24:27.064Z,1538749467.064 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:24:27.064Z,1538749467.064 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:24:27.479Z,1538749467.479 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:24:27.479Z,1538749467.479 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-10-05T14:24:27.480Z,1538749467.480 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:24:27.480Z,1538749467.480 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-10-05T14:24:27.862Z,1538749467.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:24:27.862Z,1538749467.862 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:24:27.863Z,1538749467.863 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:24:27.863Z,1538749467.863 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:24:27.863Z,1538749467.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:24:27.864Z,1538749467.864 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:25:23.675Z,1538749523.675 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T14:25:23.675Z,1538749523.675 [Default:CheckIn:C.Wait] Stopped
2018-10-05T14:25:23.675Z,1538749523.675 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T14:25:23.675Z,1538749523.675 [Default:CheckIn:D] Running Loop=1
2018-10-05T14:25:24.069Z,1538749524.069 [Default:CheckIn:D] Stopped
2018-10-05T14:25:24.069Z,1538749524.069 [Default:CheckIn:E] Running Loop=1
2018-10-05T14:25:24.459Z,1538749524.459 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2048.938281 min 
2018-10-05T14:25:24.459Z,1538749524.459 [Default:CheckIn:E] Stopped
2018-10-05T14:25:24.459Z,1538749524.459 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T14:25:24.460Z,1538749524.460 [Default:CheckIn] Stopped
2018-10-05T14:25:24.460Z,1538749524.460 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T14:25:24.460Z,1538749524.460 [Default:CheckIn](INFO): Running loop #199
2018-10-05T14:25:24.460Z,1538749524.460 [Default:CheckIn] Running Loop=199
2018-10-05T14:25:24.460Z,1538749524.460 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T14:25:24.460Z,1538749524.460 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T14:25:46.120Z,1538749546.120 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T14:25:46.120Z,1538749546.120 [NAL9602] Data Fault, FailCount= 1
2018-10-05T14:25:46.120Z,1538749546.120 [NAL9602](ERROR): Data Fault
2018-10-05T14:25:46.199Z,1538749546.199 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T14:25:46.526Z,1538749546.526 [NAL9602](INFO): Powering down
2018-10-05T14:25:47.360Z,1538749547.360 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T14:25:47.360Z,1538749547.360 [NAL9602] No Fault, FailCount= 1
2018-10-05T14:26:16.553Z,1538749576.553 [NAL9602](INFO): Powering up NAL9602
2018-10-05T14:26:27.387Z,1538749587.387 [NAL9602](INFO): NAL9602 initialized
2018-10-05T14:27:30.376Z,1538749650.376 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:27:30.376Z,1538749650.376 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-10-05T14:27:30.376Z,1538749650.376 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:27:30.378Z,1538749650.378 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:27:30.378Z,1538749650.378 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-10-05T14:27:30.378Z,1538749650.378 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:27:30.431Z,1538749650.431 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:27:30.432Z,1538749650.432 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:27:30.538Z,1538749650.538 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:27:30.538Z,1538749650.538 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-10-05T14:27:30.538Z,1538749650.538 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:27:30.538Z,1538749650.538 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-10-05T14:27:30.922Z,1538749650.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:27:30.922Z,1538749650.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:27:30.923Z,1538749650.923 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:27:30.923Z,1538749650.923 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:27:30.923Z,1538749650.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:27:30.924Z,1538749650.924 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:30:26.925Z,1538749826.925 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T14:25:24.5Z
2018-10-05T14:30:26.925Z,1538749826.925 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T14:30:26.925Z,1538749826.925 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T14:30:31.794Z,1538749831.794 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:30:31.794Z,1538749831.794 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-10-05T14:30:31.794Z,1538749831.794 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:30:31.796Z,1538749831.796 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:30:31.796Z,1538749831.796 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-10-05T14:30:31.796Z,1538749831.796 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:30:31.812Z,1538749831.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:30:31.812Z,1538749831.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:30:31.932Z,1538749831.932 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0598.lzma
2018-10-05T14:30:32.022Z,1538749832.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:30:32.022Z,1538749832.022 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-10-05T14:30:32.022Z,1538749832.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:30:32.022Z,1538749832.022 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-10-05T14:30:32.301Z,1538749832.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:30:32.301Z,1538749832.301 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:30:32.302Z,1538749832.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:30:32.302Z,1538749832.302 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:30:32.302Z,1538749832.302 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:30:32.303Z,1538749832.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:30:32.646Z,1538749832.646 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0598.lzma.bak
2018-10-05T14:30:32.646Z,1538749832.646 [DataOverHttps](INFO): SBD MOMSN=8611784
2018-10-05T14:30:41.872Z,1538749841.872 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0599.lzma
2018-10-05T14:30:42.623Z,1538749842.623 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0599.lzma.bak
2018-10-05T14:30:42.623Z,1538749842.623 [DataOverHttps](INFO): SBD MOMSN=8611786
2018-10-05T14:30:43.601Z,1538749843.601 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T14:30:43.601Z,1538749843.601 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T14:30:43.601Z,1538749843.601 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T14:33:32.355Z,1538750012.355 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:33:32.355Z,1538750012.355 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-10-05T14:33:32.355Z,1538750012.355 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:33:32.357Z,1538750012.357 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:33:32.358Z,1538750012.358 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-10-05T14:33:32.358Z,1538750012.358 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:33:32.383Z,1538750012.383 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:33:32.383Z,1538750012.383 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:33:32.768Z,1538750012.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:33:32.768Z,1538750012.768 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-10-05T14:33:32.769Z,1538750012.769 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:33:32.769Z,1538750012.769 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-10-05T14:33:33.247Z,1538750013.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:33:33.247Z,1538750013.247 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:33:33.248Z,1538750013.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:33:33.248Z,1538750013.248 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:33:33.248Z,1538750013.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:33:33.253Z,1538750013.253 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:35:43.925Z,1538750143.925 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T14:35:43.930Z,1538750143.930 [Default:CheckIn:C.Wait] Stopped
2018-10-05T14:35:43.930Z,1538750143.930 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T14:35:43.930Z,1538750143.930 [Default:CheckIn:D] Running Loop=1
2018-10-05T14:35:44.332Z,1538750144.332 [Default:CheckIn:D] Stopped
2018-10-05T14:35:44.333Z,1538750144.333 [Default:CheckIn:E] Running Loop=1
2018-10-05T14:35:44.743Z,1538750144.743 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2059.276042 min 
2018-10-05T14:35:44.744Z,1538750144.744 [Default:CheckIn:E] Stopped
2018-10-05T14:35:44.744Z,1538750144.744 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T14:35:44.744Z,1538750144.744 [Default:CheckIn] Stopped
2018-10-05T14:35:44.744Z,1538750144.744 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T14:35:44.744Z,1538750144.744 [Default:CheckIn](INFO): Running loop #200
2018-10-05T14:35:44.744Z,1538750144.744 [Default:CheckIn] Running Loop=200
2018-10-05T14:35:44.753Z,1538750144.753 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T14:35:44.753Z,1538750144.753 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T14:36:28.375Z,1538750188.375 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T14:36:28.375Z,1538750188.375 [NAL9602] Data Fault, FailCount= 2
2018-10-05T14:36:28.375Z,1538750188.375 [NAL9602](ERROR): Data Fault
2018-10-05T14:36:28.481Z,1538750188.481 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T14:36:28.775Z,1538750188.775 [NAL9602](INFO): Powering down
2018-10-05T14:36:29.707Z,1538750189.707 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T14:36:29.708Z,1538750189.708 [NAL9602] No Fault, FailCount= 2
2018-10-05T14:36:33.625Z,1538750193.625 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:36:33.625Z,1538750193.625 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-10-05T14:36:33.625Z,1538750193.625 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:36:33.627Z,1538750193.627 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:36:33.627Z,1538750193.627 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-10-05T14:36:33.627Z,1538750193.627 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:36:33.652Z,1538750193.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:36:33.652Z,1538750193.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:36:34.049Z,1538750194.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:36:34.049Z,1538750194.049 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-10-05T14:36:34.050Z,1538750194.050 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:36:34.050Z,1538750194.050 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-10-05T14:36:34.414Z,1538750194.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:36:34.414Z,1538750194.414 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:36:34.415Z,1538750194.415 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:36:34.415Z,1538750194.415 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:36:34.415Z,1538750194.415 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:36:34.416Z,1538750194.416 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:36:59.123Z,1538750219.123 [NAL9602](INFO): Powering up NAL9602
2018-10-05T14:37:10.323Z,1538750230.323 [NAL9602](INFO): NAL9602 initialized
2018-10-05T14:39:23.196Z,1538750363.196 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T14:39:36.388Z,1538750376.388 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:39:36.388Z,1538750376.388 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-10-05T14:39:36.388Z,1538750376.388 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:39:36.390Z,1538750376.390 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:39:36.390Z,1538750376.390 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-10-05T14:39:36.390Z,1538750376.390 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:39:36.404Z,1538750376.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:39:36.404Z,1538750376.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:39:36.569Z,1538750376.569 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:39:36.569Z,1538750376.569 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-10-05T14:39:36.570Z,1538750376.570 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:39:36.570Z,1538750376.570 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-10-05T14:39:36.866Z,1538750376.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:39:36.866Z,1538750376.866 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:39:36.867Z,1538750376.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:39:36.867Z,1538750376.867 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:39:36.868Z,1538750376.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:39:36.868Z,1538750376.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:40:46.963Z,1538750446.963 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T14:35:44.8Z
2018-10-05T14:40:46.963Z,1538750446.963 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T14:40:46.963Z,1538750446.963 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T14:40:51.896Z,1538750451.896 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0601.lzma
2018-10-05T14:40:52.678Z,1538750452.678 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0601.lzma.bak
2018-10-05T14:40:52.678Z,1538750452.678 [DataOverHttps](INFO): SBD MOMSN=8611790
2018-10-05T14:41:02.406Z,1538750462.406 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0602.lzma
2018-10-05T14:41:03.194Z,1538750463.194 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0602.lzma.bak
2018-10-05T14:41:03.194Z,1538750463.194 [DataOverHttps](INFO): SBD MOMSN=8611792
2018-10-05T14:41:04.146Z,1538750464.146 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T14:41:04.146Z,1538750464.146 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T14:41:04.146Z,1538750464.146 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T14:42:36.978Z,1538750556.978 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:42:36.978Z,1538750556.978 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-10-05T14:42:36.978Z,1538750556.978 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:42:36.980Z,1538750556.980 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:42:36.980Z,1538750556.980 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-10-05T14:42:36.980Z,1538750556.980 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:42:36.993Z,1538750556.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:42:36.993Z,1538750556.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:42:37.407Z,1538750557.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:42:37.407Z,1538750557.407 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-10-05T14:42:37.407Z,1538750557.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:42:37.407Z,1538750557.407 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-10-05T14:42:37.785Z,1538750557.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:42:37.785Z,1538750557.785 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:42:37.786Z,1538750557.786 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:42:37.786Z,1538750557.786 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:42:37.787Z,1538750557.787 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:42:37.787Z,1538750557.787 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:44:52.216Z,1538750692.216 [RDI_Pathfinder](ERROR): only read 1 of 5 data items
2018-10-05T14:44:52.216Z,1538750692.216 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768-32768,-32768,V
2018-10-05T14:45:37.930Z,1538750737.930 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:45:37.930Z,1538750737.930 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-10-05T14:45:37.930Z,1538750737.930 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:45:37.932Z,1538750737.932 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:45:37.932Z,1538750737.932 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-10-05T14:45:37.932Z,1538750737.932 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:45:37.945Z,1538750737.945 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:45:37.946Z,1538750737.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:45:38.358Z,1538750738.358 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:45:38.358Z,1538750738.358 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-10-05T14:45:38.359Z,1538750738.359 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:45:38.359Z,1538750738.359 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-10-05T14:45:38.747Z,1538750738.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:45:38.748Z,1538750738.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:45:38.748Z,1538750738.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:45:38.748Z,1538750738.748 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:45:38.749Z,1538750738.749 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:45:38.749Z,1538750738.749 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:46:04.623Z,1538750764.623 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T14:46:04.623Z,1538750764.623 [Default:CheckIn:C.Wait] Stopped
2018-10-05T14:46:04.623Z,1538750764.623 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T14:46:04.623Z,1538750764.623 [Default:CheckIn:D] Running Loop=1
2018-10-05T14:46:05.019Z,1538750765.019 [Default:CheckIn:D] Stopped
2018-10-05T14:46:05.019Z,1538750765.019 [Default:CheckIn:E] Running Loop=1
2018-10-05T14:46:05.404Z,1538750765.404 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2069.620833 min 
2018-10-05T14:46:05.417Z,1538750765.417 [Default:CheckIn:E] Stopped
2018-10-05T14:46:05.417Z,1538750765.417 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T14:46:05.417Z,1538750765.417 [Default:CheckIn] Stopped
2018-10-05T14:46:05.417Z,1538750765.417 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T14:46:05.417Z,1538750765.417 [Default:CheckIn](INFO): Running loop #201
2018-10-05T14:46:05.418Z,1538750765.418 [Default:CheckIn] Running Loop=201
2018-10-05T14:46:05.418Z,1538750765.418 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T14:46:05.418Z,1538750765.418 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T14:46:40.692Z,1538750800.692 [RDI_Pathfinder](ERROR): only read 1 of 1 data item for altitude
2018-10-05T14:46:40.692Z,1538750800.692 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,,0ffd,*15.880,*-0.001,*0.000
2018-10-05T14:47:11.163Z,1538750831.163 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T14:47:11.163Z,1538750831.163 [NAL9602] Data Fault, FailCount= 3
2018-10-05T14:47:11.163Z,1538750831.163 [NAL9602](ERROR): Data Fault
2018-10-05T14:47:11.241Z,1538750831.241 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T14:47:11.563Z,1538750831.563 [NAL9602](INFO): Powering down
2018-10-05T14:47:12.412Z,1538750832.412 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T14:47:12.412Z,1538750832.412 [NAL9602] No Fault, FailCount= 3
2018-10-05T14:47:41.727Z,1538750861.727 [NAL9602](INFO): Powering up NAL9602
2018-10-05T14:47:52.531Z,1538750872.531 [NAL9602](INFO): NAL9602 initialized
2018-10-05T14:48:39.091Z,1538750919.091 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:48:39.091Z,1538750919.091 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-10-05T14:48:39.091Z,1538750919.091 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:48:39.097Z,1538750919.097 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:48:39.097Z,1538750919.097 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-10-05T14:48:39.097Z,1538750919.097 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:48:39.123Z,1538750919.123 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:48:39.123Z,1538750919.123 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:48:39.511Z,1538750919.511 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:48:39.512Z,1538750919.512 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-10-05T14:48:39.512Z,1538750919.512 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:48:39.513Z,1538750919.513 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-10-05T14:48:39.913Z,1538750919.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:48:39.913Z,1538750919.913 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:48:39.914Z,1538750919.914 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:48:39.914Z,1538750919.914 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:48:39.915Z,1538750919.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:48:39.915Z,1538750919.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:51:07.411Z,1538751067.411 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T14:46:05.4Z
2018-10-05T14:51:07.411Z,1538751067.411 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T14:51:07.411Z,1538751067.411 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T14:51:12.370Z,1538751072.370 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0604.lzma
2018-10-05T14:51:13.155Z,1538751073.155 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0604.lzma.bak
2018-10-05T14:51:13.155Z,1538751073.155 [DataOverHttps](INFO): SBD MOMSN=8611796
2018-10-05T14:51:24.395Z,1538751084.395 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0605.lzma
2018-10-05T14:51:24.982Z,1538751084.982 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0605.lzma.bak
2018-10-05T14:51:24.982Z,1538751084.982 [DataOverHttps](INFO): SBD MOMSN=8611798
2018-10-05T14:51:26.758Z,1538751086.758 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T14:51:26.758Z,1538751086.758 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T14:51:26.758Z,1538751086.758 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T14:51:40.154Z,1538751100.154 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:51:40.154Z,1538751100.154 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-10-05T14:51:40.154Z,1538751100.154 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:51:40.156Z,1538751100.156 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:51:40.156Z,1538751100.156 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-10-05T14:51:40.156Z,1538751100.156 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:51:40.182Z,1538751100.182 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:51:40.182Z,1538751100.182 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:51:40.582Z,1538751100.582 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:51:40.582Z,1538751100.582 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-10-05T14:51:40.583Z,1538751100.583 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:51:40.583Z,1538751100.583 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-10-05T14:51:41.002Z,1538751101.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:51:41.002Z,1538751101.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:51:41.002Z,1538751101.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:51:41.003Z,1538751101.003 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:51:41.003Z,1538751101.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:51:41.004Z,1538751101.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:54:41.179Z,1538751281.179 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:54:41.179Z,1538751281.179 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-10-05T14:54:41.179Z,1538751281.179 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:54:41.185Z,1538751281.185 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:54:41.186Z,1538751281.186 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-10-05T14:54:41.186Z,1538751281.186 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:54:41.207Z,1538751281.207 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:54:41.207Z,1538751281.207 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:54:41.598Z,1538751281.598 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:54:41.598Z,1538751281.598 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-10-05T14:54:41.599Z,1538751281.599 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:54:41.599Z,1538751281.599 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-10-05T14:54:41.993Z,1538751281.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:54:41.994Z,1538751281.994 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:54:41.994Z,1538751281.994 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:54:41.995Z,1538751281.995 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:54:41.995Z,1538751281.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:54:41.995Z,1538751281.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:56:27.005Z,1538751387.005 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T14:56:27.005Z,1538751387.005 [Default:CheckIn:C.Wait] Stopped
2018-10-05T14:56:27.005Z,1538751387.005 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T14:56:27.005Z,1538751387.005 [Default:CheckIn:D] Running Loop=1
2018-10-05T14:56:27.405Z,1538751387.405 [Default:CheckIn:D] Stopped
2018-10-05T14:56:27.405Z,1538751387.405 [Default:CheckIn:E] Running Loop=1
2018-10-05T14:56:27.850Z,1538751387.850 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2079.993880 min 
2018-10-05T14:56:27.850Z,1538751387.850 [Default:CheckIn:E] Stopped
2018-10-05T14:56:27.850Z,1538751387.850 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T14:56:27.850Z,1538751387.850 [Default:CheckIn] Stopped
2018-10-05T14:56:27.850Z,1538751387.850 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T14:56:27.851Z,1538751387.851 [Default:CheckIn](INFO): Running loop #202
2018-10-05T14:56:27.851Z,1538751387.851 [Default:CheckIn] Running Loop=202
2018-10-05T14:56:27.851Z,1538751387.851 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T14:56:27.851Z,1538751387.851 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T14:57:42.135Z,1538751462.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:57:42.135Z,1538751462.135 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-10-05T14:57:42.135Z,1538751462.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T14:57:42.137Z,1538751462.137 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T14:57:42.138Z,1538751462.138 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-10-05T14:57:42.138Z,1538751462.138 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T14:57:42.151Z,1538751462.151 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T14:57:42.151Z,1538751462.151 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T14:57:42.543Z,1538751462.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T14:57:42.543Z,1538751462.543 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-10-05T14:57:42.543Z,1538751462.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T14:57:42.543Z,1538751462.543 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-10-05T14:57:42.946Z,1538751462.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T14:57:42.946Z,1538751462.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:57:42.946Z,1538751462.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:57:42.947Z,1538751462.947 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T14:57:42.947Z,1538751462.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T14:57:42.948Z,1538751462.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T14:57:54.883Z,1538751474.883 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T14:57:54.883Z,1538751474.883 [NAL9602] Data Fault, FailCount= 4
2018-10-05T14:57:54.883Z,1538751474.883 [NAL9602](ERROR): Data Fault
2018-10-05T14:57:54.952Z,1538751474.952 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T14:57:55.283Z,1538751475.283 [NAL9602](INFO): Powering down
2018-10-05T14:57:58.677Z,1538751478.677 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T14:57:58.677Z,1538751478.677 [NAL9602] No Fault, FailCount= 4
2018-10-05T14:58:25.403Z,1538751505.403 [NAL9602](INFO): Powering up NAL9602
2018-10-05T14:58:36.335Z,1538751516.335 [NAL9602](INFO): NAL9602 initialized
2018-10-05T15:00:43.201Z,1538751643.201 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:00:43.202Z,1538751643.202 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-10-05T15:00:43.202Z,1538751643.202 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:00:43.204Z,1538751643.204 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:00:43.204Z,1538751643.204 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-10-05T15:00:43.204Z,1538751643.204 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:00:43.231Z,1538751643.231 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:00:43.231Z,1538751643.231 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:00:43.575Z,1538751643.575 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:00:43.575Z,1538751643.575 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-10-05T15:00:43.576Z,1538751643.576 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:00:43.576Z,1538751643.576 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-10-05T15:00:43.926Z,1538751643.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:00:43.926Z,1538751643.926 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:00:43.927Z,1538751643.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:00:43.927Z,1538751643.927 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:00:43.927Z,1538751643.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:00:43.928Z,1538751643.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:01:32.069Z,1538751692.069 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T14:56:27.9Z
2018-10-05T15:01:32.069Z,1538751692.069 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T15:01:32.069Z,1538751692.069 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T15:01:40.686Z,1538751700.686 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0607.lzma
2018-10-05T15:01:41.472Z,1538751701.472 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0607.lzma.bak
2018-10-05T15:01:41.472Z,1538751701.472 [DataOverHttps](INFO): SBD MOMSN=8611802
2018-10-05T15:01:50.685Z,1538751710.685 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0608.lzma
2018-10-05T15:01:51.466Z,1538751711.466 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0608.lzma.bak
2018-10-05T15:01:51.466Z,1538751711.466 [DataOverHttps](INFO): SBD MOMSN=8611804
2018-10-05T15:01:52.418Z,1538751712.418 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T15:01:52.418Z,1538751712.418 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T15:01:52.418Z,1538751712.418 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T15:03:43.104Z,1538751823.104 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.887,*-0.007,*0.000
2018-10-05T15:03:43.927Z,1538751823.927 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:03:43.927Z,1538751823.927 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-10-05T15:03:43.927Z,1538751823.927 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:03:43.930Z,1538751823.930 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:03:43.930Z,1538751823.930 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-10-05T15:03:43.930Z,1538751823.930 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:03:43.964Z,1538751823.964 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:03:43.964Z,1538751823.964 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:03:44.365Z,1538751824.365 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:03:44.365Z,1538751824.365 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-10-05T15:03:44.366Z,1538751824.366 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:03:44.366Z,1538751824.366 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-10-05T15:03:44.731Z,1538751824.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:03:44.731Z,1538751824.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:03:44.732Z,1538751824.732 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:03:44.732Z,1538751824.732 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:03:44.732Z,1538751824.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:03:44.733Z,1538751824.733 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:03:49.903Z,1538751829.903 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T15:03:49.903Z,1538751829.903 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100508084783,35.0, 0.0,1448.9,  0
2018-10-05T15:06:44.879Z,1538752004.879 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:06:44.879Z,1538752004.879 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-10-05T15:06:44.879Z,1538752004.879 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:06:44.881Z,1538752004.881 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:06:44.881Z,1538752004.881 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-10-05T15:06:44.881Z,1538752004.881 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:06:44.894Z,1538752004.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:06:44.895Z,1538752004.895 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:06:45.285Z,1538752005.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:06:45.285Z,1538752005.285 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-10-05T15:06:45.286Z,1538752005.286 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:06:45.286Z,1538752005.286 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-10-05T15:06:45.674Z,1538752005.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:06:45.675Z,1538752005.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:06:45.675Z,1538752005.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:06:45.675Z,1538752005.675 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:06:45.676Z,1538752005.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:06:45.676Z,1538752005.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:06:52.888Z,1538752012.888 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T15:06:52.888Z,1538752012.888 [Default:CheckIn:C.Wait] Stopped
2018-10-05T15:06:52.888Z,1538752012.888 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T15:06:52.888Z,1538752012.888 [Default:CheckIn:D] Running Loop=1
2018-10-05T15:06:53.289Z,1538752013.289 [Default:CheckIn:D] Stopped
2018-10-05T15:06:53.289Z,1538752013.289 [Default:CheckIn:E] Running Loop=1
2018-10-05T15:06:53.706Z,1538752013.706 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2090.425260 min 
2018-10-05T15:06:53.706Z,1538752013.706 [Default:CheckIn:E] Stopped
2018-10-05T15:06:53.706Z,1538752013.706 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T15:06:53.707Z,1538752013.707 [Default:CheckIn] Stopped
2018-10-05T15:06:53.707Z,1538752013.707 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T15:06:53.707Z,1538752013.707 [Default:CheckIn](INFO): Running loop #203
2018-10-05T15:06:53.707Z,1538752013.707 [Default:CheckIn] Running Loop=203
2018-10-05T15:06:53.707Z,1538752013.707 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T15:06:53.707Z,1538752013.707 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T15:08:38.899Z,1538752118.899 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T15:08:38.899Z,1538752118.899 [NAL9602] Data Fault, FailCount= 5
2018-10-05T15:08:38.899Z,1538752118.899 [NAL9602](ERROR): Data Fault
2018-10-05T15:08:38.938Z,1538752118.938 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T15:08:38.939Z,1538752118.939 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T15:08:39.287Z,1538752119.287 [NAL9602](INFO): Powering down
2018-10-05T15:08:39.359Z,1538752119.359 [CBIT](INFO): Critical error at 20181005T150838
2018-10-05T15:09:46.027Z,1538752186.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:09:46.027Z,1538752186.027 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-10-05T15:09:46.027Z,1538752186.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:09:46.033Z,1538752186.033 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:09:46.033Z,1538752186.033 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-10-05T15:09:46.033Z,1538752186.033 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:09:46.075Z,1538752186.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:09:46.075Z,1538752186.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:09:46.447Z,1538752186.447 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:09:46.447Z,1538752186.447 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-10-05T15:09:46.448Z,1538752186.448 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:09:46.449Z,1538752186.449 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-10-05T15:09:46.824Z,1538752186.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:09:46.824Z,1538752186.824 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:09:46.825Z,1538752186.825 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:09:46.829Z,1538752186.829 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:09:46.830Z,1538752186.830 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:09:46.830Z,1538752186.830 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:10:38.945Z,1538752238.945 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T15:10:38.945Z,1538752238.945 [NAL9602] No Fault, FailCount= 5
2018-10-05T15:10:39.295Z,1538752239.295 [NAL9602](INFO): Powering up NAL9602
2018-10-05T15:10:50.179Z,1538752250.179 [NAL9602](INFO): NAL9602 initialized
2018-10-05T15:11:09.854Z,1538752269.854 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T15:11:55.633Z,1538752315.633 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T15:06:53.7Z
2018-10-05T15:11:55.633Z,1538752315.633 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T15:11:55.633Z,1538752315.633 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T15:12:00.548Z,1538752320.548 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20181004T041305/Courier0610.lzma
2018-10-05T15:12:01.306Z,1538752321.306 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0610.lzma.bak
2018-10-05T15:12:01.306Z,1538752321.306 [DataOverHttps](INFO): SBD MOMSN=8611808
2018-10-05T15:12:10.521Z,1538752330.521 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0611.lzma
2018-10-05T15:12:11.286Z,1538752331.286 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0611.lzma.bak
2018-10-05T15:12:11.286Z,1538752331.286 [DataOverHttps](INFO): SBD MOMSN=8611811
2018-10-05T15:12:12.277Z,1538752332.277 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T15:12:12.277Z,1538752332.277 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T15:12:12.277Z,1538752332.277 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T15:12:46.856Z,1538752366.856 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:12:46.857Z,1538752366.857 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-10-05T15:12:46.857Z,1538752366.857 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:12:46.859Z,1538752366.859 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:12:46.859Z,1538752366.859 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-10-05T15:12:46.859Z,1538752366.859 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:12:46.872Z,1538752366.872 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:12:46.872Z,1538752366.872 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:12:47.270Z,1538752367.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:12:47.270Z,1538752367.270 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-10-05T15:12:47.271Z,1538752367.271 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:12:47.271Z,1538752367.271 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-10-05T15:12:47.666Z,1538752367.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:12:47.667Z,1538752367.667 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:12:47.667Z,1538752367.667 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:12:47.668Z,1538752367.668 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:12:47.668Z,1538752367.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:12:47.668Z,1538752367.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:15:47.678Z,1538752547.678 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:15:47.678Z,1538752547.678 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-10-05T15:15:47.678Z,1538752547.678 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:15:47.680Z,1538752547.680 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:15:47.680Z,1538752547.680 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-10-05T15:15:47.681Z,1538752547.681 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:15:47.715Z,1538752547.715 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:15:47.715Z,1538752547.715 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:15:47.823Z,1538752547.823 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:15:47.823Z,1538752547.823 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-10-05T15:15:47.823Z,1538752547.823 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:15:47.824Z,1538752547.824 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-10-05T15:15:48.201Z,1538752548.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:15:48.202Z,1538752548.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:15:48.202Z,1538752548.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:15:48.203Z,1538752548.203 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:15:48.203Z,1538752548.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:15:48.203Z,1538752548.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:16:59.745Z,1538752619.745 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T15:17:12.544Z,1538752632.544 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T15:17:12.545Z,1538752632.545 [Default:CheckIn:C.Wait] Stopped
2018-10-05T15:17:12.545Z,1538752632.545 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T15:17:12.545Z,1538752632.545 [Default:CheckIn:D] Running Loop=1
2018-10-05T15:17:12.956Z,1538752632.956 [Default:CheckIn:D] Stopped
2018-10-05T15:17:12.956Z,1538752632.956 [Default:CheckIn:E] Running Loop=1
2018-10-05T15:17:13.344Z,1538752633.344 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2100.753125 min 
2018-10-05T15:17:13.344Z,1538752633.344 [Default:CheckIn:E] Stopped
2018-10-05T15:17:13.344Z,1538752633.344 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T15:17:13.344Z,1538752633.344 [Default:CheckIn] Stopped
2018-10-05T15:17:13.344Z,1538752633.344 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T15:17:13.344Z,1538752633.344 [Default:CheckIn](INFO): Running loop #204
2018-10-05T15:17:13.345Z,1538752633.345 [Default:CheckIn] Running Loop=204
2018-10-05T15:17:13.345Z,1538752633.345 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T15:17:13.345Z,1538752633.345 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T15:18:03.850Z,1538752683.850 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe, 15.860, -0.009, 0.000
2018-10-05T15:18:48.438Z,1538752728.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:18:48.439Z,1538752728.439 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-10-05T15:18:48.439Z,1538752728.439 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:18:48.442Z,1538752728.442 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:18:48.443Z,1538752728.443 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-10-05T15:18:48.443Z,1538752728.443 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:18:48.479Z,1538752728.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:18:48.479Z,1538752728.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:18:48.842Z,1538752728.842 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:18:48.842Z,1538752728.842 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-10-05T15:18:48.843Z,1538752728.843 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:18:48.843Z,1538752728.843 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-10-05T15:18:49.218Z,1538752729.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:18:49.218Z,1538752729.218 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:18:49.219Z,1538752729.219 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:18:49.219Z,1538752729.219 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:18:49.219Z,1538752729.219 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:18:49.220Z,1538752729.220 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:20:53.175Z,1538752853.175 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T15:20:53.176Z,1538752853.176 [NAL9602] Data Fault, FailCount= 1
2018-10-05T15:20:53.176Z,1538752853.176 [NAL9602](ERROR): Data Fault
2018-10-05T15:20:53.283Z,1538752853.283 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T15:20:53.555Z,1538752853.555 [NAL9602](INFO): Powering down
2018-10-05T15:20:54.459Z,1538752854.459 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T15:20:54.459Z,1538752854.459 [NAL9602] No Fault, FailCount= 1
2018-10-05T15:21:23.703Z,1538752883.703 [NAL9602](INFO): Powering up NAL9602
2018-10-05T15:21:34.899Z,1538752894.899 [NAL9602](INFO): NAL9602 initialized
2018-10-05T15:21:49.454Z,1538752909.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:21:49.454Z,1538752909.454 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-10-05T15:21:49.454Z,1538752909.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:21:49.467Z,1538752909.467 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:21:49.467Z,1538752909.467 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-10-05T15:21:49.468Z,1538752909.468 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:21:49.507Z,1538752909.507 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:21:49.508Z,1538752909.508 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:21:49.918Z,1538752909.918 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:21:49.918Z,1538752909.918 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-10-05T15:21:49.919Z,1538752909.919 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:21:49.919Z,1538752909.919 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-10-05T15:21:50.278Z,1538752910.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:21:50.278Z,1538752910.278 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:21:50.278Z,1538752910.278 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:21:50.279Z,1538752910.279 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:21:50.279Z,1538752910.279 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:21:50.280Z,1538752910.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:22:15.865Z,1538752935.865 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T15:17:13.3Z
2018-10-05T15:22:15.866Z,1538752935.866 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T15:22:15.866Z,1538752935.866 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T15:22:21.241Z,1538752941.241 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0613.lzma
2018-10-05T15:22:22.035Z,1538752942.035 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0613.lzma.bak
2018-10-05T15:22:22.035Z,1538752942.035 [DataOverHttps](INFO): SBD MOMSN=8611815
2018-10-05T15:22:31.265Z,1538752951.265 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0614.lzma
2018-10-05T15:22:32.049Z,1538752952.049 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0614.lzma.bak
2018-10-05T15:22:32.050Z,1538752952.050 [DataOverHttps](INFO): SBD MOMSN=8611817
2018-10-05T15:22:33.186Z,1538752953.186 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T15:22:33.186Z,1538752953.186 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T15:22:33.186Z,1538752953.186 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T15:24:50.451Z,1538753090.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:24:50.451Z,1538753090.451 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-10-05T15:24:50.451Z,1538753090.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:24:50.453Z,1538753090.453 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:24:50.453Z,1538753090.453 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-10-05T15:24:50.453Z,1538753090.453 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:24:50.466Z,1538753090.466 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:24:50.467Z,1538753090.467 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:24:50.878Z,1538753090.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:24:50.878Z,1538753090.878 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-10-05T15:24:50.879Z,1538753090.879 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:24:50.879Z,1538753090.879 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-10-05T15:24:51.225Z,1538753091.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:24:51.233Z,1538753091.233 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:24:51.234Z,1538753091.234 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:24:51.234Z,1538753091.234 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:24:51.234Z,1538753091.234 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:24:51.235Z,1538753091.235 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:27:33.309Z,1538753253.309 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T15:27:33.310Z,1538753253.310 [Default:CheckIn:C.Wait] Stopped
2018-10-05T15:27:33.310Z,1538753253.310 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T15:27:33.310Z,1538753253.310 [Default:CheckIn:D] Running Loop=1
2018-10-05T15:27:33.734Z,1538753253.734 [Default:CheckIn:D] Stopped
2018-10-05T15:27:33.734Z,1538753253.734 [Default:CheckIn:E] Running Loop=1
2018-10-05T15:27:34.113Z,1538753254.113 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2111.099479 min 
2018-10-05T15:27:34.113Z,1538753254.113 [Default:CheckIn:E] Stopped
2018-10-05T15:27:34.113Z,1538753254.113 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T15:27:34.114Z,1538753254.114 [Default:CheckIn] Stopped
2018-10-05T15:27:34.114Z,1538753254.114 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T15:27:34.114Z,1538753254.114 [Default:CheckIn](INFO): Running loop #205
2018-10-05T15:27:34.114Z,1538753254.114 [Default:CheckIn] Running Loop=205
2018-10-05T15:27:34.114Z,1538753254.114 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T15:27:34.114Z,1538753254.114 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T15:27:54.142Z,1538753274.142 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:27:54.142Z,1538753274.142 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-10-05T15:27:54.142Z,1538753274.142 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:27:54.144Z,1538753274.144 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:27:54.144Z,1538753274.144 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-10-05T15:27:54.144Z,1538753274.144 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:27:54.158Z,1538753274.158 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:27:54.158Z,1538753274.158 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:27:54.296Z,1538753274.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:27:54.296Z,1538753274.296 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-10-05T15:27:54.296Z,1538753274.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:27:54.296Z,1538753274.296 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-10-05T15:27:54.628Z,1538753274.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:27:54.633Z,1538753274.633 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:27:54.633Z,1538753274.633 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:27:54.634Z,1538753274.634 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:27:54.634Z,1538753274.634 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:27:54.635Z,1538753274.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:30:54.687Z,1538753454.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:30:54.687Z,1538753454.687 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-10-05T15:30:54.687Z,1538753454.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:30:54.693Z,1538753454.693 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:30:54.693Z,1538753454.693 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-10-05T15:30:54.693Z,1538753454.693 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:30:54.711Z,1538753454.711 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:30:54.712Z,1538753454.712 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:30:55.095Z,1538753455.095 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:30:55.095Z,1538753455.095 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-10-05T15:30:55.095Z,1538753455.095 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:30:55.095Z,1538753455.095 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-10-05T15:30:55.492Z,1538753455.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:30:55.497Z,1538753455.497 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:30:55.498Z,1538753455.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:30:55.498Z,1538753455.498 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:30:55.498Z,1538753455.498 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:30:55.499Z,1538753455.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:31:36.883Z,1538753496.883 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T15:31:36.883Z,1538753496.883 [NAL9602] Data Fault, FailCount= 2
2018-10-05T15:31:36.884Z,1538753496.884 [NAL9602](ERROR): Data Fault
2018-10-05T15:31:36.952Z,1538753496.952 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T15:31:37.271Z,1538753497.271 [NAL9602](INFO): Powering down
2018-10-05T15:31:38.136Z,1538753498.136 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T15:31:38.136Z,1538753498.136 [NAL9602] No Fault, FailCount= 2
2018-10-05T15:32:07.307Z,1538753527.307 [NAL9602](INFO): Powering up NAL9602
2018-10-05T15:32:18.511Z,1538753538.511 [NAL9602](INFO): NAL9602 initialized
2018-10-05T15:32:36.165Z,1538753556.165 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T15:27:34.1Z
2018-10-05T15:32:36.165Z,1538753556.165 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T15:32:36.165Z,1538753556.165 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T15:32:41.261Z,1538753561.261 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0616.lzma
2018-10-05T15:32:42.048Z,1538753562.048 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0616.lzma.bak
2018-10-05T15:32:42.048Z,1538753562.048 [DataOverHttps](INFO): SBD MOMSN=8611821
2018-10-05T15:32:51.275Z,1538753571.275 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0617.lzma
2018-10-05T15:32:52.053Z,1538753572.053 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0617.lzma.bak
2018-10-05T15:32:52.053Z,1538753572.053 [DataOverHttps](INFO): SBD MOMSN=8611823
2018-10-05T15:32:53.031Z,1538753573.031 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T15:32:53.031Z,1538753573.031 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T15:32:53.031Z,1538753573.031 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T15:33:55.663Z,1538753635.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:33:55.663Z,1538753635.663 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-10-05T15:33:55.663Z,1538753635.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:33:55.665Z,1538753635.665 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:33:55.665Z,1538753635.665 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-10-05T15:33:55.665Z,1538753635.665 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:33:55.678Z,1538753635.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:33:55.678Z,1538753635.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:33:56.083Z,1538753636.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:33:56.083Z,1538753636.083 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-10-05T15:33:56.083Z,1538753636.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:33:56.083Z,1538753636.083 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-10-05T15:33:56.478Z,1538753636.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:33:56.478Z,1538753636.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:33:56.479Z,1538753636.479 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:33:56.479Z,1538753636.479 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:33:56.479Z,1538753636.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:33:56.480Z,1538753636.480 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:36:56.719Z,1538753816.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:36:56.720Z,1538753816.720 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-10-05T15:36:56.720Z,1538753816.720 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:36:56.722Z,1538753816.722 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:36:56.722Z,1538753816.722 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-10-05T15:36:56.722Z,1538753816.722 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:36:56.756Z,1538753816.756 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:36:56.756Z,1538753816.756 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:36:57.136Z,1538753817.136 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:36:57.136Z,1538753817.136 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-10-05T15:36:57.136Z,1538753817.136 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:36:57.136Z,1538753817.136 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-10-05T15:36:57.525Z,1538753817.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:36:57.526Z,1538753817.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:36:57.526Z,1538753817.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:36:57.527Z,1538753817.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:36:57.527Z,1538753817.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:36:57.527Z,1538753817.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:37:53.309Z,1538753873.309 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T15:37:53.309Z,1538753873.309 [Default:CheckIn:C.Wait] Stopped
2018-10-05T15:37:53.309Z,1538753873.309 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T15:37:53.309Z,1538753873.309 [Default:CheckIn:D] Running Loop=1
2018-10-05T15:37:53.717Z,1538753873.717 [Default:CheckIn:D] Stopped
2018-10-05T15:37:53.717Z,1538753873.717 [Default:CheckIn:E] Running Loop=1
2018-10-05T15:37:54.093Z,1538753874.093 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2121.432422 min 
2018-10-05T15:37:54.093Z,1538753874.093 [Default:CheckIn:E] Stopped
2018-10-05T15:37:54.093Z,1538753874.093 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T15:37:54.093Z,1538753874.093 [Default:CheckIn] Stopped
2018-10-05T15:37:54.094Z,1538753874.094 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T15:37:54.094Z,1538753874.094 [Default:CheckIn](INFO): Running loop #206
2018-10-05T15:37:54.094Z,1538753874.094 [Default:CheckIn] Running Loop=206
2018-10-05T15:37:54.094Z,1538753874.094 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T15:37:54.094Z,1538753874.094 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T15:40:00.072Z,1538754000.072 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:40:00.072Z,1538754000.072 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-10-05T15:40:00.072Z,1538754000.072 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:40:00.074Z,1538754000.074 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:40:00.074Z,1538754000.074 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-10-05T15:40:00.074Z,1538754000.074 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:40:00.087Z,1538754000.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:40:00.087Z,1538754000.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:40:00.235Z,1538754000.235 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:40:00.235Z,1538754000.235 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-10-05T15:40:00.236Z,1538754000.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:40:00.236Z,1538754000.236 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-10-05T15:40:00.618Z,1538754000.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:40:00.618Z,1538754000.618 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:40:00.618Z,1538754000.618 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:40:00.619Z,1538754000.619 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:40:00.619Z,1538754000.619 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:40:00.620Z,1538754000.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:40:36.671Z,1538754036.671 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.894, -0.002, 0.000
2018-10-05T15:42:21.335Z,1538754141.335 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T15:42:21.335Z,1538754141.335 [NAL9602] Data Fault, FailCount= 3
2018-10-05T15:42:21.336Z,1538754141.336 [NAL9602](ERROR): Data Fault
2018-10-05T15:42:21.414Z,1538754141.414 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T15:42:21.699Z,1538754141.699 [NAL9602](INFO): Powering down
2018-10-05T15:42:22.548Z,1538754142.548 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T15:42:22.548Z,1538754142.548 [NAL9602] No Fault, FailCount= 3
2018-10-05T15:42:52.096Z,1538754172.096 [NAL9602](INFO): Powering up NAL9602
2018-10-05T15:42:56.948Z,1538754176.948 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T15:37:54.1Z
2018-10-05T15:42:56.948Z,1538754176.948 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T15:42:56.948Z,1538754176.948 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T15:43:01.824Z,1538754181.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:43:01.824Z,1538754181.824 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-10-05T15:43:01.824Z,1538754181.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:43:01.830Z,1538754181.830 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:43:01.831Z,1538754181.831 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-10-05T15:43:01.831Z,1538754181.831 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:43:01.861Z,1538754181.861 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:43:01.869Z,1538754181.869 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:43:01.964Z,1538754181.964 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:43:01.964Z,1538754181.964 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-10-05T15:43:01.964Z,1538754181.964 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:43:01.964Z,1538754181.964 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-10-05T15:43:02.288Z,1538754182.288 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0619.lzma
2018-10-05T15:43:02.342Z,1538754182.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:43:02.342Z,1538754182.342 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:43:02.343Z,1538754182.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:43:02.343Z,1538754182.343 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:43:02.344Z,1538754182.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:43:02.344Z,1538754182.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:43:03.087Z,1538754183.087 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0619.lzma.bak
2018-10-05T15:43:03.088Z,1538754183.088 [DataOverHttps](INFO): SBD MOMSN=8611827
2018-10-05T15:43:03.094Z,1538754183.094 [NAL9602](INFO): NAL9602 initialized
2018-10-05T15:43:12.431Z,1538754192.431 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0620.lzma
2018-10-05T15:43:13.206Z,1538754193.206 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0620.lzma.bak
2018-10-05T15:43:13.206Z,1538754193.206 [DataOverHttps](INFO): SBD MOMSN=8611829
2018-10-05T15:43:14.237Z,1538754194.237 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T15:43:14.237Z,1538754194.237 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T15:43:14.237Z,1538754194.237 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T15:46:02.443Z,1538754362.443 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:46:02.443Z,1538754362.443 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-10-05T15:46:02.443Z,1538754362.443 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:46:02.449Z,1538754362.449 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:46:02.450Z,1538754362.450 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-10-05T15:46:02.450Z,1538754362.450 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:46:02.471Z,1538754362.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:46:02.471Z,1538754362.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:46:02.882Z,1538754362.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:46:02.882Z,1538754362.882 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-10-05T15:46:02.883Z,1538754362.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:46:02.883Z,1538754362.883 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-10-05T15:46:03.246Z,1538754363.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:46:03.246Z,1538754363.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:46:03.247Z,1538754363.247 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:46:03.247Z,1538754363.247 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:46:03.247Z,1538754363.247 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:46:03.248Z,1538754363.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:48:14.631Z,1538754494.631 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T15:48:14.631Z,1538754494.631 [Default:CheckIn:C.Wait] Stopped
2018-10-05T15:48:14.631Z,1538754494.631 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T15:48:14.631Z,1538754494.631 [Default:CheckIn:D] Running Loop=1
2018-10-05T15:48:15.017Z,1538754495.017 [Default:CheckIn:D] Stopped
2018-10-05T15:48:15.017Z,1538754495.017 [Default:CheckIn:E] Running Loop=1
2018-10-05T15:48:15.433Z,1538754495.433 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2131.787500 min 
2018-10-05T15:48:15.433Z,1538754495.433 [Default:CheckIn:E] Stopped
2018-10-05T15:48:15.433Z,1538754495.433 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T15:48:15.433Z,1538754495.433 [Default:CheckIn] Stopped
2018-10-05T15:48:15.434Z,1538754495.434 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T15:48:15.434Z,1538754495.434 [Default:CheckIn](INFO): Running loop #207
2018-10-05T15:48:15.434Z,1538754495.434 [Default:CheckIn] Running Loop=207
2018-10-05T15:48:15.434Z,1538754495.434 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T15:48:15.434Z,1538754495.434 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T15:49:03.530Z,1538754543.530 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:49:03.530Z,1538754543.530 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2018-10-05T15:49:03.530Z,1538754543.530 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:49:03.532Z,1538754543.532 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:49:03.532Z,1538754543.532 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2018-10-05T15:49:03.532Z,1538754543.532 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:49:03.557Z,1538754543.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:49:03.557Z,1538754543.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:49:03.940Z,1538754543.940 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:49:03.940Z,1538754543.940 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2018-10-05T15:49:03.940Z,1538754543.940 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:49:03.940Z,1538754543.940 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2018-10-05T15:49:04.314Z,1538754544.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:49:04.314Z,1538754544.314 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:49:04.315Z,1538754544.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:49:04.315Z,1538754544.315 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:49:04.316Z,1538754544.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:49:04.316Z,1538754544.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:52:07.421Z,1538754727.421 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:52:07.421Z,1538754727.421 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2018-10-05T15:52:07.421Z,1538754727.421 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:52:07.423Z,1538754727.423 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:52:07.423Z,1538754727.423 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2018-10-05T15:52:07.423Z,1538754727.423 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:52:07.437Z,1538754727.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:52:07.437Z,1538754727.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:52:07.575Z,1538754727.575 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:52:07.575Z,1538754727.575 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2018-10-05T15:52:07.576Z,1538754727.576 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:52:07.576Z,1538754727.576 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2018-10-05T15:52:07.910Z,1538754727.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:52:07.910Z,1538754727.910 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:52:07.911Z,1538754727.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:52:07.911Z,1538754727.911 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:52:07.912Z,1538754727.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:52:07.912Z,1538754727.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:53:06.311Z,1538754786.311 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T15:53:06.311Z,1538754786.311 [NAL9602] Data Fault, FailCount= 4
2018-10-05T15:53:06.311Z,1538754786.311 [NAL9602](ERROR): Data Fault
2018-10-05T15:53:06.397Z,1538754786.397 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T15:53:06.711Z,1538754786.711 [NAL9602](INFO): Powering down
2018-10-05T15:53:07.599Z,1538754787.599 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T15:53:07.599Z,1538754787.599 [NAL9602] No Fault, FailCount= 4
2018-10-05T15:53:17.549Z,1538754797.549 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T15:48:15.4Z
2018-10-05T15:53:17.550Z,1538754797.550 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T15:53:17.550Z,1538754797.550 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T15:53:22.462Z,1538754802.462 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0622.lzma
2018-10-05T15:53:23.238Z,1538754803.238 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0622.lzma.bak
2018-10-05T15:53:23.239Z,1538754803.239 [DataOverHttps](INFO): SBD MOMSN=8611833
2018-10-05T15:53:32.805Z,1538754812.805 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0623.lzma
2018-10-05T15:53:33.598Z,1538754813.598 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0623.lzma.bak
2018-10-05T15:53:33.598Z,1538754813.598 [DataOverHttps](INFO): SBD MOMSN=8611835
2018-10-05T15:53:34.592Z,1538754814.592 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T15:53:34.592Z,1538754814.592 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T15:53:34.592Z,1538754814.592 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T15:53:37.814Z,1538754817.814 [NAL9602](INFO): Powering up NAL9602
2018-10-05T15:53:48.739Z,1538754828.739 [NAL9602](INFO): NAL9602 initialized
2018-10-05T15:55:08.239Z,1538754908.239 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:55:08.239Z,1538754908.239 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2018-10-05T15:55:08.239Z,1538754908.239 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:55:08.245Z,1538754908.245 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:55:08.246Z,1538754908.246 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2018-10-05T15:55:08.246Z,1538754908.246 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:55:08.274Z,1538754908.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:55:08.274Z,1538754908.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:55:08.675Z,1538754908.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:55:08.675Z,1538754908.675 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2018-10-05T15:55:08.675Z,1538754908.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:55:08.675Z,1538754908.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2018-10-05T15:55:09.018Z,1538754909.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:55:09.018Z,1538754909.018 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:55:09.019Z,1538754909.019 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:55:09.019Z,1538754909.019 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:55:09.019Z,1538754909.019 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:55:09.020Z,1538754909.020 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:58:09.063Z,1538755089.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:58:09.063Z,1538755089.063 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2018-10-05T15:58:09.063Z,1538755089.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T15:58:09.065Z,1538755089.065 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T15:58:09.066Z,1538755089.066 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2018-10-05T15:58:09.066Z,1538755089.066 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T15:58:09.087Z,1538755089.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T15:58:09.087Z,1538755089.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T15:58:09.518Z,1538755089.518 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T15:58:09.518Z,1538755089.518 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2018-10-05T15:58:09.519Z,1538755089.519 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T15:58:09.519Z,1538755089.519 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2018-10-05T15:58:09.868Z,1538755089.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T15:58:09.869Z,1538755089.869 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:58:09.869Z,1538755089.869 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:58:09.870Z,1538755089.870 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T15:58:09.870Z,1538755089.870 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T15:58:09.871Z,1538755089.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T15:58:34.723Z,1538755114.723 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T15:58:34.723Z,1538755114.723 [Default:CheckIn:C.Wait] Stopped
2018-10-05T15:58:34.723Z,1538755114.723 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T15:58:34.723Z,1538755114.723 [Default:CheckIn:D] Running Loop=1
2018-10-05T15:58:35.121Z,1538755115.121 [Default:CheckIn:D] Stopped
2018-10-05T15:58:35.121Z,1538755115.121 [Default:CheckIn:E] Running Loop=1
2018-10-05T15:58:35.524Z,1538755115.524 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2142.122526 min 
2018-10-05T15:58:35.524Z,1538755115.524 [Default:CheckIn:E] Stopped
2018-10-05T15:58:35.524Z,1538755115.524 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T15:58:35.524Z,1538755115.524 [Default:CheckIn] Stopped
2018-10-05T15:58:35.525Z,1538755115.525 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T15:58:35.525Z,1538755115.525 [Default:CheckIn](INFO): Running loop #208
2018-10-05T15:58:35.525Z,1538755115.525 [Default:CheckIn] Running Loop=208
2018-10-05T15:58:35.525Z,1538755115.525 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T15:58:35.525Z,1538755115.525 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T16:01:09.883Z,1538755269.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:01:09.883Z,1538755269.883 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2018-10-05T16:01:09.883Z,1538755269.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:01:09.905Z,1538755269.905 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:01:09.905Z,1538755269.905 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2018-10-05T16:01:09.905Z,1538755269.905 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:01:09.927Z,1538755269.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:01:09.927Z,1538755269.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:01:10.307Z,1538755270.307 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:01:10.307Z,1538755270.307 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2018-10-05T16:01:10.308Z,1538755270.308 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:01:10.308Z,1538755270.308 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2018-10-05T16:01:10.728Z,1538755270.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:01:10.730Z,1538755270.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:01:10.730Z,1538755270.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:01:10.730Z,1538755270.730 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:01:10.731Z,1538755270.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:01:10.731Z,1538755270.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:03:37.844Z,1538755417.844 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T15:58:35.5Z
2018-10-05T16:03:37.844Z,1538755417.844 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T16:03:37.844Z,1538755417.844 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T16:03:42.801Z,1538755422.801 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0625.lzma
2018-10-05T16:03:43.579Z,1538755423.579 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0625.lzma.bak
2018-10-05T16:03:43.579Z,1538755423.579 [DataOverHttps](INFO): SBD MOMSN=8611839
2018-10-05T16:03:43.648Z,1538755423.648 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T16:03:58.284Z,1538755438.284 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20181004T041305/Express0626.lzma
2018-10-05T16:03:58.291Z,1538755438.291 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T16:03:58.291Z,1538755438.291 [NAL9602] Data Fault, FailCount= 5
2018-10-05T16:03:58.291Z,1538755438.291 [NAL9602](ERROR): Data Fault
2018-10-05T16:03:58.426Z,1538755438.426 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T16:03:58.427Z,1538755438.427 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T16:03:58.499Z,1538755438.499 [NAL9602](INFO): Powering down
2018-10-05T16:03:58.558Z,1538755438.558 [CBIT](INFO): Critical error at 20181005T160358
2018-10-05T16:03:59.725Z,1538755439.725 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0626.lzma.bak
2018-10-05T16:03:59.725Z,1538755439.725 [DataOverHttps](INFO): SBD MOMSN=8611841
2018-10-05T16:03:59.754Z,1538755439.754 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-05T16:04:00.441Z,1538755440.441 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T16:04:00.441Z,1538755440.441 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T16:04:00.441Z,1538755440.441 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T16:04:10.771Z,1538755450.771 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:04:10.771Z,1538755450.771 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2018-10-05T16:04:10.771Z,1538755450.771 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:04:10.773Z,1538755450.773 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:04:10.773Z,1538755450.773 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2018-10-05T16:04:10.773Z,1538755450.773 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:04:10.787Z,1538755450.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:04:10.787Z,1538755450.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:04:11.171Z,1538755451.171 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:04:11.171Z,1538755451.171 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2018-10-05T16:04:11.172Z,1538755451.172 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:04:11.172Z,1538755451.172 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2018-10-05T16:04:11.534Z,1538755451.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:04:11.535Z,1538755451.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:04:11.535Z,1538755451.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:04:11.536Z,1538755451.536 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:04:11.536Z,1538755451.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:04:11.537Z,1538755451.537 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:05:58.541Z,1538755558.541 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T16:05:58.541Z,1538755558.541 [NAL9602] No Fault, FailCount= 5
2018-10-05T16:05:58.859Z,1538755558.859 [NAL9602](INFO): Powering up NAL9602
2018-10-05T16:06:10.067Z,1538755570.067 [NAL9602](INFO): NAL9602 initialized
2018-10-05T16:07:11.783Z,1538755631.783 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:07:11.784Z,1538755631.784 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2018-10-05T16:07:11.784Z,1538755631.784 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:07:11.786Z,1538755631.786 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:07:11.786Z,1538755631.786 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2018-10-05T16:07:11.786Z,1538755631.786 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:07:11.811Z,1538755631.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:07:11.812Z,1538755631.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:07:12.174Z,1538755632.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:07:12.174Z,1538755632.174 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2018-10-05T16:07:12.175Z,1538755632.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:07:12.175Z,1538755632.175 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2018-10-05T16:07:12.557Z,1538755632.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:07:12.557Z,1538755632.557 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:07:12.558Z,1538755632.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:07:12.558Z,1538755632.558 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:07:12.559Z,1538755632.559 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:07:12.559Z,1538755632.559 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:09:00.902Z,1538755740.902 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T16:09:00.902Z,1538755740.902 [Default:CheckIn:C.Wait] Stopped
2018-10-05T16:09:00.902Z,1538755740.902 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T16:09:00.903Z,1538755740.903 [Default:CheckIn:D] Running Loop=1
2018-10-05T16:09:01.295Z,1538755741.295 [Default:CheckIn:D] Stopped
2018-10-05T16:09:01.295Z,1538755741.295 [Default:CheckIn:E] Running Loop=1
2018-10-05T16:09:01.702Z,1538755741.702 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2152.558854 min 
2018-10-05T16:09:01.703Z,1538755741.703 [Default:CheckIn:E] Stopped
2018-10-05T16:09:01.703Z,1538755741.703 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T16:09:01.703Z,1538755741.703 [Default:CheckIn] Stopped
2018-10-05T16:09:01.704Z,1538755741.704 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T16:09:01.704Z,1538755741.704 [Default:CheckIn](INFO): Running loop #209
2018-10-05T16:09:01.704Z,1538755741.704 [Default:CheckIn] Running Loop=209
2018-10-05T16:09:01.704Z,1538755741.704 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T16:09:01.709Z,1538755741.709 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T16:10:12.619Z,1538755812.619 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:10:12.619Z,1538755812.619 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2018-10-05T16:10:12.619Z,1538755812.619 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:10:12.621Z,1538755812.621 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:10:12.621Z,1538755812.621 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2018-10-05T16:10:12.621Z,1538755812.621 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:10:12.667Z,1538755812.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:10:12.667Z,1538755812.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:10:13.058Z,1538755813.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:10:13.058Z,1538755813.058 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2018-10-05T16:10:13.058Z,1538755813.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:10:13.058Z,1538755813.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2018-10-05T16:10:13.450Z,1538755813.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:10:13.450Z,1538755813.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:10:13.450Z,1538755813.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:10:13.451Z,1538755813.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:10:13.451Z,1538755813.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:10:13.452Z,1538755813.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:13:13.585Z,1538755993.585 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:13:13.585Z,1538755993.585 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2018-10-05T16:13:13.586Z,1538755993.586 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:13:13.587Z,1538755993.587 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:13:13.588Z,1538755993.588 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2018-10-05T16:13:13.588Z,1538755993.588 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:13:13.630Z,1538755993.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:13:13.630Z,1538755993.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:13:13.995Z,1538755993.995 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:13:13.995Z,1538755993.995 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2018-10-05T16:13:13.996Z,1538755993.996 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:13:13.996Z,1538755993.996 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2018-10-05T16:13:14.384Z,1538755994.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:13:14.389Z,1538755994.389 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:13:14.389Z,1538755994.389 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:13:14.390Z,1538755994.390 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:13:14.390Z,1538755994.390 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:13:14.391Z,1538755994.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:13:25.191Z,1538756005.191 [BPC1](ERROR): BPC1B: No match for stick with serial number:1717 in the onboard configuration file.
2018-10-05T16:13:29.712Z,1538756009.712 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,33140.80
2018-10-05T16:14:03.739Z,1538756043.739 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T16:09:01.7Z
2018-10-05T16:14:03.739Z,1538756043.739 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T16:14:03.739Z,1538756043.739 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T16:14:08.870Z,1538756048.870 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0628.lzma
2018-10-05T16:14:09.666Z,1538756049.666 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0628.lzma.bak
2018-10-05T16:14:09.666Z,1538756049.666 [DataOverHttps](INFO): SBD MOMSN=8611844
2018-10-05T16:14:18.945Z,1538756058.945 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0629.lzma
2018-10-05T16:14:19.734Z,1538756059.734 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0629.lzma.bak
2018-10-05T16:14:19.734Z,1538756059.734 [DataOverHttps](INFO): SBD MOMSN=8611847
2018-10-05T16:14:20.761Z,1538756060.761 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T16:14:20.761Z,1538756060.761 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T16:14:20.761Z,1538756060.761 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T16:14:53.088Z,1538756093.088 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T16:14:53.089Z,1538756093.089 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768V
2018-10-05T16:14:59.571Z,1538756099.571 [CBIT](IMPORTANT): Beginning ground fault scan
2018-10-05T16:15:10.064Z,1538756110.064 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.002068
CHAN A1 (24V): 0.003278
CHAN A2 (12V): -0.007356
CHAN A3 (5V): -0.001989
CHAN B0 (3.3V): 0.000438
CHAN B1 (3.15aV): 0.000125
CHAN B2 (3.15bV): 0.000037
CHAN B3 (GND): 0.002413
OPEN: 0.004755
Full Scale Calc: 4.765 mA, -1.589 mA
2018-10-05T16:16:12.791Z,1538756172.791 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T16:16:12.791Z,1538756172.791 [NAL9602] Data Fault, FailCount= 1
2018-10-05T16:16:12.791Z,1538756172.791 [NAL9602](ERROR): Data Fault
2018-10-05T16:16:12.920Z,1538756172.920 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T16:16:13.183Z,1538756173.183 [NAL9602](INFO): Powering down
2018-10-05T16:16:14.077Z,1538756174.077 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T16:16:14.077Z,1538756174.077 [NAL9602] No Fault, FailCount= 1
2018-10-05T16:16:14.512Z,1538756174.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:16:14.512Z,1538756174.512 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2018-10-05T16:16:14.512Z,1538756174.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:16:14.514Z,1538756174.514 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:16:14.514Z,1538756174.514 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2018-10-05T16:16:14.514Z,1538756174.514 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:16:14.542Z,1538756174.542 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:16:14.543Z,1538756174.543 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:16:14.851Z,1538756174.851 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:16:14.851Z,1538756174.851 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2018-10-05T16:16:14.852Z,1538756174.852 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:16:14.852Z,1538756174.852 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2018-10-05T16:16:15.245Z,1538756175.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:16:15.246Z,1538756175.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:16:15.246Z,1538756175.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:16:15.247Z,1538756175.247 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:16:15.247Z,1538756175.247 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:16:15.248Z,1538756175.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:16:45.160Z,1538756205.160 [NAL9602](INFO): Powering up NAL9602
2018-10-05T16:16:56.059Z,1538756216.059 [NAL9602](INFO): NAL9602 initialized
2018-10-05T16:17:21.832Z,1538756241.832 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T16:18:39.300Z,1538756319.300 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T16:19:15.409Z,1538756355.409 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:19:15.409Z,1538756355.409 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2018-10-05T16:19:15.409Z,1538756355.409 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:19:15.411Z,1538756355.411 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:19:15.411Z,1538756355.411 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2018-10-05T16:19:15.411Z,1538756355.411 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:19:15.448Z,1538756355.448 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:19:15.448Z,1538756355.448 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:19:15.823Z,1538756355.823 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:19:15.823Z,1538756355.823 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2018-10-05T16:19:15.823Z,1538756355.823 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:19:15.823Z,1538756355.823 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2018-10-05T16:19:16.198Z,1538756356.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:19:16.198Z,1538756356.198 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:19:16.199Z,1538756356.199 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:19:16.199Z,1538756356.199 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:19:16.199Z,1538756356.199 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:19:16.200Z,1538756356.200 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:19:21.004Z,1538756361.004 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T16:19:21.009Z,1538756361.009 [Default:CheckIn:C.Wait] Stopped
2018-10-05T16:19:21.009Z,1538756361.009 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T16:19:21.009Z,1538756361.009 [Default:CheckIn:D] Running Loop=1
2018-10-05T16:19:21.402Z,1538756361.402 [Default:CheckIn:D] Stopped
2018-10-05T16:19:21.402Z,1538756361.402 [Default:CheckIn:E] Running Loop=1
2018-10-05T16:19:21.803Z,1538756361.803 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2162.893880 min 
2018-10-05T16:19:21.804Z,1538756361.804 [Default:CheckIn:E] Stopped
2018-10-05T16:19:21.804Z,1538756361.804 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T16:19:21.804Z,1538756361.804 [Default:CheckIn] Stopped
2018-10-05T16:19:21.804Z,1538756361.804 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T16:19:21.804Z,1538756361.804 [Default:CheckIn](INFO): Running loop #210
2018-10-05T16:19:21.804Z,1538756361.804 [Default:CheckIn] Running Loop=210
2018-10-05T16:19:21.809Z,1538756361.809 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T16:19:21.809Z,1538756361.809 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T16:22:16.532Z,1538756536.532 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:22:16.532Z,1538756536.532 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2018-10-05T16:22:16.532Z,1538756536.532 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:22:16.534Z,1538756536.534 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:22:16.534Z,1538756536.534 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2018-10-05T16:22:16.534Z,1538756536.534 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:22:16.555Z,1538756536.555 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:22:16.556Z,1538756536.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:22:16.947Z,1538756536.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:22:16.947Z,1538756536.947 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2018-10-05T16:22:16.947Z,1538756536.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:22:16.947Z,1538756536.947 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2018-10-05T16:22:17.343Z,1538756537.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:22:17.344Z,1538756537.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:22:17.344Z,1538756537.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:22:17.345Z,1538756537.345 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:22:17.345Z,1538756537.345 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:22:17.346Z,1538756537.346 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:22:30.902Z,1538756550.902 [RDI_Pathfinder](ERROR): Failed to parse:     +0.00,        +0.00,        +0.00,   0.00,33680.68
2018-10-05T16:24:08.386Z,1538756648.386 [RDI_Pathfinder](ERROR): only read 1 of 1 data item for altitude
2018-10-05T16:24:08.387Z,1538756648.387 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G0894, 0.007, 65.535
2018-10-05T16:24:23.589Z,1538756663.589 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T16:19:21.8Z
2018-10-05T16:24:23.589Z,1538756663.589 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T16:24:23.589Z,1538756663.589 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T16:24:28.569Z,1538756668.569 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0631.lzma
2018-10-05T16:24:29.347Z,1538756669.347 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0631.lzma.bak
2018-10-05T16:24:29.347Z,1538756669.347 [DataOverHttps](INFO): SBD MOMSN=8611851
2018-10-05T16:24:38.542Z,1538756678.542 [DataOverHttps](INFO): Sending 326 bytes from file Logs/20181004T041305/Express0632.lzma
2018-10-05T16:24:39.294Z,1538756679.294 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0632.lzma.bak
2018-10-05T16:24:39.294Z,1538756679.294 [DataOverHttps](INFO): SBD MOMSN=8611853
2018-10-05T16:24:40.235Z,1538756680.235 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T16:24:40.235Z,1538756680.235 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T16:24:40.235Z,1538756680.235 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T16:25:18.910Z,1538756718.910 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:25:18.910Z,1538756718.910 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2018-10-05T16:25:18.910Z,1538756718.910 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:25:18.914Z,1538756718.914 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:25:18.914Z,1538756718.914 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2018-10-05T16:25:18.914Z,1538756718.914 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:25:18.932Z,1538756718.932 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:25:18.932Z,1538756718.932 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:25:19.060Z,1538756719.060 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:25:19.060Z,1538756719.060 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2018-10-05T16:25:19.061Z,1538756719.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:25:19.065Z,1538756719.065 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2018-10-05T16:25:19.428Z,1538756719.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:25:19.429Z,1538756719.429 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:25:19.429Z,1538756719.429 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:25:19.430Z,1538756719.430 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:25:19.430Z,1538756719.430 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:25:19.430Z,1538756719.430 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:26:58.395Z,1538756818.395 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T16:26:58.395Z,1538756818.395 [NAL9602] Data Fault, FailCount= 2
2018-10-05T16:26:58.395Z,1538756818.395 [NAL9602](ERROR): Data Fault
2018-10-05T16:26:58.485Z,1538756818.485 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T16:26:58.787Z,1538756818.787 [NAL9602](INFO): Powering down
2018-10-05T16:26:59.671Z,1538756819.671 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T16:26:59.671Z,1538756819.671 [NAL9602] No Fault, FailCount= 2
2018-10-05T16:27:28.916Z,1538756848.916 [NAL9602](INFO): Powering up NAL9602
2018-10-05T16:27:40.603Z,1538756860.603 [NAL9602](INFO): NAL9602 initialized
2018-10-05T16:28:19.593Z,1538756899.593 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:28:19.593Z,1538756899.593 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2018-10-05T16:28:19.593Z,1538756899.593 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:28:19.595Z,1538756899.595 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:28:19.595Z,1538756899.595 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2018-10-05T16:28:19.595Z,1538756899.595 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:28:19.626Z,1538756899.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:28:19.626Z,1538756899.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:28:20.009Z,1538756900.009 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:28:20.009Z,1538756900.009 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2018-10-05T16:28:20.010Z,1538756900.010 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:28:20.010Z,1538756900.010 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2018-10-05T16:28:20.374Z,1538756900.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:28:20.375Z,1538756900.375 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:28:20.375Z,1538756900.375 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:28:20.376Z,1538756900.376 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:28:20.376Z,1538756900.376 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:28:20.376Z,1538756900.376 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:29:40.602Z,1538756980.602 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T16:29:40.602Z,1538756980.602 [Default:CheckIn:C.Wait] Stopped
2018-10-05T16:29:40.602Z,1538756980.602 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T16:29:40.603Z,1538756980.603 [Default:CheckIn:D] Running Loop=1
2018-10-05T16:29:40.985Z,1538756980.985 [Default:CheckIn:D] Stopped
2018-10-05T16:29:40.985Z,1538756980.985 [Default:CheckIn:E] Running Loop=1
2018-10-05T16:29:41.385Z,1538756981.385 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2173.220182 min 
2018-10-05T16:29:41.385Z,1538756981.385 [Default:CheckIn:E] Stopped
2018-10-05T16:29:41.385Z,1538756981.385 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T16:29:41.386Z,1538756981.386 [Default:CheckIn] Stopped
2018-10-05T16:29:41.386Z,1538756981.386 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T16:29:41.386Z,1538756981.386 [Default:CheckIn](INFO): Running loop #211
2018-10-05T16:29:41.386Z,1538756981.386 [Default:CheckIn] Running Loop=211
2018-10-05T16:29:41.386Z,1538756981.386 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T16:29:41.386Z,1538756981.386 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T16:31:20.435Z,1538757080.435 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:31:20.436Z,1538757080.436 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2018-10-05T16:31:20.436Z,1538757080.436 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:31:20.454Z,1538757080.454 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:31:20.454Z,1538757080.454 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2018-10-05T16:31:20.454Z,1538757080.454 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:31:20.480Z,1538757080.480 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:31:20.493Z,1538757080.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:31:20.881Z,1538757080.881 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:31:20.881Z,1538757080.881 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2018-10-05T16:31:20.882Z,1538757080.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:31:20.882Z,1538757080.882 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2018-10-05T16:31:21.245Z,1538757081.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:31:21.245Z,1538757081.245 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:31:21.246Z,1538757081.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:31:21.246Z,1538757081.246 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:31:21.246Z,1538757081.246 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:31:21.247Z,1538757081.247 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:34:21.432Z,1538757261.432 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:34:21.432Z,1538757261.432 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2018-10-05T16:34:21.432Z,1538757261.432 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:34:21.434Z,1538757261.434 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:34:21.434Z,1538757261.434 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2018-10-05T16:34:21.434Z,1538757261.434 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:34:21.476Z,1538757261.476 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:34:21.476Z,1538757261.476 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:34:21.878Z,1538757261.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:34:21.878Z,1538757261.878 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2018-10-05T16:34:21.879Z,1538757261.879 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:34:21.879Z,1538757261.879 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2018-10-05T16:34:22.256Z,1538757262.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:34:22.256Z,1538757262.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:34:22.257Z,1538757262.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:34:22.257Z,1538757262.257 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:34:22.258Z,1538757262.258 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:34:22.258Z,1538757262.258 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:34:43.466Z,1538757283.466 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T16:29:41.4Z
2018-10-05T16:34:43.466Z,1538757283.466 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T16:34:43.466Z,1538757283.466 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T16:34:53.288Z,1538757293.288 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0634.lzma
2018-10-05T16:34:54.795Z,1538757294.795 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0634.lzma.bak
2018-10-05T16:34:54.795Z,1538757294.795 [DataOverHttps](INFO): SBD MOMSN=8611859
2018-10-05T16:35:04.137Z,1538757304.137 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0635.lzma
2018-10-05T16:35:04.934Z,1538757304.934 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0635.lzma.bak
2018-10-05T16:35:04.934Z,1538757304.934 [DataOverHttps](INFO): SBD MOMSN=8611861
2018-10-05T16:35:05.908Z,1538757305.908 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T16:35:05.908Z,1538757305.908 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T16:35:05.908Z,1538757305.908 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T16:37:22.610Z,1538757442.610 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:37:22.610Z,1538757442.610 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2018-10-05T16:37:22.610Z,1538757442.610 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:37:22.612Z,1538757442.612 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:37:22.612Z,1538757442.612 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2018-10-05T16:37:22.612Z,1538757442.612 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:37:22.625Z,1538757442.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:37:22.626Z,1538757442.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:37:23.042Z,1538757443.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:37:23.042Z,1538757443.042 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2018-10-05T16:37:23.042Z,1538757443.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:37:23.042Z,1538757443.042 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2018-10-05T16:37:23.413Z,1538757443.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:37:23.413Z,1538757443.413 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:37:23.414Z,1538757443.414 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:37:23.414Z,1538757443.414 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:37:23.415Z,1538757443.415 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:37:23.415Z,1538757443.415 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:37:41.899Z,1538757461.899 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T16:37:41.899Z,1538757461.899 [NAL9602] Data Fault, FailCount= 3
2018-10-05T16:37:41.899Z,1538757461.899 [NAL9602](ERROR): Data Fault
2018-10-05T16:37:41.989Z,1538757461.989 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T16:37:42.295Z,1538757462.295 [NAL9602](INFO): Powering down
2018-10-05T16:37:43.153Z,1538757463.153 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T16:37:43.157Z,1538757463.157 [NAL9602] No Fault, FailCount= 3
2018-10-05T16:38:12.391Z,1538757492.391 [NAL9602](INFO): Powering up NAL9602
2018-10-05T16:38:23.591Z,1538757503.591 [NAL9602](INFO): NAL9602 initialized
2018-10-05T16:40:06.428Z,1538757606.428 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T16:40:06.428Z,1538757606.428 [Default:CheckIn:C.Wait] Stopped
2018-10-05T16:40:06.429Z,1538757606.429 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T16:40:06.429Z,1538757606.429 [Default:CheckIn:D] Running Loop=1
2018-10-05T16:40:06.800Z,1538757606.800 [Default:CheckIn:D] Stopped
2018-10-05T16:40:06.800Z,1538757606.800 [Default:CheckIn:E] Running Loop=1
2018-10-05T16:40:07.189Z,1538757607.189 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2183.650521 min 
2018-10-05T16:40:07.189Z,1538757607.189 [Default:CheckIn:E] Stopped
2018-10-05T16:40:07.189Z,1538757607.189 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T16:40:07.190Z,1538757607.190 [Default:CheckIn] Stopped
2018-10-05T16:40:07.190Z,1538757607.190 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T16:40:07.190Z,1538757607.190 [Default:CheckIn](INFO): Running loop #212
2018-10-05T16:40:07.190Z,1538757607.190 [Default:CheckIn] Running Loop=212
2018-10-05T16:40:07.190Z,1538757607.190 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T16:40:07.190Z,1538757607.190 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T16:40:23.631Z,1538757623.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:40:23.631Z,1538757623.631 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2018-10-05T16:40:23.631Z,1538757623.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:40:23.637Z,1538757623.637 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:40:23.637Z,1538757623.637 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2018-10-05T16:40:23.637Z,1538757623.637 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:40:23.658Z,1538757623.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:40:23.659Z,1538757623.659 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:40:26.817Z,1538757626.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:40:26.817Z,1538757626.817 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2018-10-05T16:40:26.817Z,1538757626.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:40:26.817Z,1538757626.817 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2018-10-05T16:40:26.930Z,1538757626.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:40:26.930Z,1538757626.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:40:26.931Z,1538757626.931 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:40:26.931Z,1538757626.931 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:40:26.932Z,1538757626.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:40:26.932Z,1538757626.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:42:13.574Z,1538757733.574 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,34858.07
2018-10-05T16:43:26.947Z,1538757806.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:43:26.947Z,1538757806.947 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2018-10-05T16:43:26.947Z,1538757806.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:43:26.953Z,1538757806.953 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:43:26.953Z,1538757806.953 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2018-10-05T16:43:26.953Z,1538757806.953 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:43:26.978Z,1538757806.978 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:43:26.978Z,1538757806.978 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:43:27.398Z,1538757807.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:43:27.398Z,1538757807.398 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2018-10-05T16:43:27.399Z,1538757807.399 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:43:27.399Z,1538757807.399 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2018-10-05T16:43:27.740Z,1538757807.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:43:27.740Z,1538757807.740 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:43:27.741Z,1538757807.741 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:43:27.745Z,1538757807.745 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:43:27.746Z,1538757807.746 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:43:27.746Z,1538757807.746 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:45:09.162Z,1538757909.162 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T16:40:07.2Z
2018-10-05T16:45:09.162Z,1538757909.162 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T16:45:09.162Z,1538757909.162 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T16:45:14.564Z,1538757914.564 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0637.lzma
2018-10-05T16:45:15.362Z,1538757915.362 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0637.lzma.bak
2018-10-05T16:45:15.363Z,1538757915.363 [DataOverHttps](INFO): SBD MOMSN=8611865
2018-10-05T16:45:25.049Z,1538757925.049 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0638.lzma
2018-10-05T16:45:25.829Z,1538757925.829 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0638.lzma.bak
2018-10-05T16:45:25.829Z,1538757925.829 [DataOverHttps](INFO): SBD MOMSN=8611867
2018-10-05T16:45:26.811Z,1538757926.811 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T16:45:26.811Z,1538757926.811 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T16:45:26.811Z,1538757926.811 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T16:46:27.899Z,1538757987.899 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:46:27.899Z,1538757987.899 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2018-10-05T16:46:27.899Z,1538757987.899 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:46:27.930Z,1538757987.930 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:46:27.930Z,1538757987.930 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2018-10-05T16:46:27.930Z,1538757987.930 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:46:27.968Z,1538757987.968 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:46:27.968Z,1538757987.968 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:46:28.363Z,1538757988.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:46:28.363Z,1538757988.363 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2018-10-05T16:46:28.363Z,1538757988.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:46:28.364Z,1538757988.364 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2018-10-05T16:46:28.722Z,1538757988.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:46:28.722Z,1538757988.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:46:28.723Z,1538757988.723 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:46:28.723Z,1538757988.723 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:46:28.723Z,1538757988.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:46:28.724Z,1538757988.724 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:48:27.441Z,1538758107.441 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T16:48:27.441Z,1538758107.441 [NAL9602] Data Fault, FailCount= 4
2018-10-05T16:48:27.441Z,1538758107.441 [NAL9602](ERROR): Data Fault
2018-10-05T16:48:27.525Z,1538758107.525 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T16:48:27.831Z,1538758107.831 [NAL9602](INFO): Powering down
2018-10-05T16:48:28.703Z,1538758108.703 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T16:48:28.703Z,1538758108.703 [NAL9602] No Fault, FailCount= 4
2018-10-05T16:48:58.227Z,1538758138.227 [NAL9602](INFO): Powering up NAL9602
2018-10-05T16:49:09.073Z,1538758149.073 [NAL9602](INFO): NAL9602 initialized
2018-10-05T16:49:29.127Z,1538758169.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:49:29.127Z,1538758169.127 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2018-10-05T16:49:29.127Z,1538758169.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:49:29.130Z,1538758169.130 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:49:29.130Z,1538758169.130 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2018-10-05T16:49:29.130Z,1538758169.130 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:49:29.175Z,1538758169.175 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:49:29.176Z,1538758169.176 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:49:29.540Z,1538758169.540 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:49:29.540Z,1538758169.540 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2018-10-05T16:49:29.549Z,1538758169.549 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:49:29.549Z,1538758169.549 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2018-10-05T16:49:29.914Z,1538758169.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:49:29.914Z,1538758169.914 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:49:29.915Z,1538758169.915 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:49:29.915Z,1538758169.915 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:49:29.915Z,1538758169.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:49:29.916Z,1538758169.916 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:50:27.305Z,1538758227.305 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T16:50:27.305Z,1538758227.305 [Default:CheckIn:C.Wait] Stopped
2018-10-05T16:50:27.305Z,1538758227.305 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T16:50:27.305Z,1538758227.305 [Default:CheckIn:D] Running Loop=1
2018-10-05T16:50:27.690Z,1538758227.690 [Default:CheckIn:D] Stopped
2018-10-05T16:50:27.690Z,1538758227.690 [Default:CheckIn:E] Running Loop=1
2018-10-05T16:50:28.081Z,1538758228.081 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2193.998698 min 
2018-10-05T16:50:28.081Z,1538758228.081 [Default:CheckIn:E] Stopped
2018-10-05T16:50:28.082Z,1538758228.082 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T16:50:28.082Z,1538758228.082 [Default:CheckIn] Stopped
2018-10-05T16:50:28.082Z,1538758228.082 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T16:50:28.082Z,1538758228.082 [Default:CheckIn](INFO): Running loop #213
2018-10-05T16:50:28.082Z,1538758228.082 [Default:CheckIn] Running Loop=213
2018-10-05T16:50:28.082Z,1538758228.082 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T16:50:28.082Z,1538758228.082 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T16:50:41.685Z,1538758241.685 [RDI_Pathfinder](ERROR): only read 1 of 1 data item for altitude
2018-10-05T16:50:41.686Z,1538758241.686 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,,0ffd,*15.887,*-0.007,*0.000
2018-10-05T16:52:30.168Z,1538758350.168 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:52:30.168Z,1538758350.168 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2018-10-05T16:52:30.169Z,1538758350.169 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:52:30.170Z,1538758350.170 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:52:30.171Z,1538758350.171 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2018-10-05T16:52:30.171Z,1538758350.171 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:52:30.184Z,1538758350.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:52:30.184Z,1538758350.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:52:30.610Z,1538758350.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:52:30.610Z,1538758350.610 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2018-10-05T16:52:30.611Z,1538758350.611 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:52:30.611Z,1538758350.611 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2018-10-05T16:52:33.743Z,1538758353.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:52:33.744Z,1538758353.744 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:52:33.744Z,1538758353.744 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:52:33.745Z,1538758353.745 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:52:33.777Z,1538758353.777 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:52:33.778Z,1538758353.778 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:55:30.323Z,1538758530.323 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T16:50:28.1Z
2018-10-05T16:55:30.323Z,1538758530.323 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T16:55:30.323Z,1538758530.323 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T16:55:35.180Z,1538758535.180 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:55:35.180Z,1538758535.180 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2018-10-05T16:55:35.180Z,1538758535.180 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:55:35.198Z,1538758535.198 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:55:35.198Z,1538758535.198 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2018-10-05T16:55:35.198Z,1538758535.198 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:55:35.220Z,1538758535.220 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:55:35.220Z,1538758535.220 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:55:35.282Z,1538758535.282 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0640.lzma
2018-10-05T16:55:35.391Z,1538758535.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T16:55:35.391Z,1538758535.391 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2018-10-05T16:55:35.391Z,1538758535.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T16:55:35.391Z,1538758535.391 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2018-10-05T16:55:35.709Z,1538758535.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T16:55:35.709Z,1538758535.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:55:35.710Z,1538758535.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:55:35.710Z,1538758535.710 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T16:55:35.711Z,1538758535.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T16:55:35.711Z,1538758535.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T16:55:36.042Z,1538758536.042 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0640.lzma.bak
2018-10-05T16:55:36.042Z,1538758536.042 [DataOverHttps](INFO): SBD MOMSN=8611871
2018-10-05T16:55:45.408Z,1538758545.408 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0641.lzma
2018-10-05T16:55:46.170Z,1538758546.170 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0641.lzma.bak
2018-10-05T16:55:46.171Z,1538758546.171 [DataOverHttps](INFO): SBD MOMSN=8611873
2018-10-05T16:55:47.152Z,1538758547.152 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T16:55:47.153Z,1538758547.153 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T16:55:47.157Z,1538758547.157 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T16:58:35.803Z,1538758715.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:58:35.803Z,1538758715.803 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2018-10-05T16:58:35.803Z,1538758715.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T16:58:35.830Z,1538758715.830 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T16:58:35.830Z,1538758715.830 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2018-10-05T16:58:35.830Z,1538758715.830 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T16:58:35.870Z,1538758715.870 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:58:35.870Z,1538758715.870 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T16:58:35.871Z,1538758715.871 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:58:35.871Z,1538758715.871 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T16:59:10.243Z,1538758750.243 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T16:59:10.243Z,1538758750.243 [NAL9602] Data Fault, FailCount= 5
2018-10-05T16:59:10.243Z,1538758750.243 [NAL9602](ERROR): Data Fault
2018-10-05T16:59:10.314Z,1538758750.314 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T16:59:10.315Z,1538758750.315 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T16:59:10.643Z,1538758750.643 [NAL9602](INFO): Powering down
2018-10-05T16:59:10.717Z,1538758750.717 [CBIT](INFO): Critical error at 20181005T165910
2018-10-05T17:00:47.339Z,1538758847.339 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T17:00:47.339Z,1538758847.339 [Default:CheckIn:C.Wait] Stopped
2018-10-05T17:00:47.340Z,1538758847.340 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T17:00:47.340Z,1538758847.340 [Default:CheckIn:D] Running Loop=1
2018-10-05T17:00:47.691Z,1538758847.691 [Default:CheckIn:D] Stopped
2018-10-05T17:00:47.691Z,1538758847.691 [Default:CheckIn:E] Running Loop=1
2018-10-05T17:00:48.091Z,1538758848.091 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2204.332031 min 
2018-10-05T17:00:48.091Z,1538758848.091 [Default:CheckIn:E] Stopped
2018-10-05T17:00:48.091Z,1538758848.091 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T17:00:48.092Z,1538758848.092 [Default:CheckIn] Stopped
2018-10-05T17:00:48.092Z,1538758848.092 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T17:00:48.092Z,1538758848.092 [Default:CheckIn](INFO): Running loop #214
2018-10-05T17:00:48.092Z,1538758848.092 [Default:CheckIn] Running Loop=214
2018-10-05T17:00:48.092Z,1538758848.092 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T17:00:48.092Z,1538758848.092 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T17:01:10.612Z,1538758870.612 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T17:01:10.612Z,1538758870.612 [NAL9602] No Fault, FailCount= 5
2018-10-05T17:01:10.951Z,1538758870.951 [NAL9602](INFO): Powering up NAL9602
2018-10-05T17:01:22.151Z,1538758882.151 [NAL9602](INFO): NAL9602 initialized
2018-10-05T17:02:19.585Z,1538758939.585 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe, 15.887, -0.001, 0.000
2018-10-05T17:05:50.087Z,1538759150.087 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T17:00:48.1Z
2018-10-05T17:05:50.087Z,1538759150.087 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T17:05:50.087Z,1538759150.087 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T17:05:55.039Z,1538759155.039 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0643.lzma
2018-10-05T17:05:55.815Z,1538759155.815 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0643.lzma.bak
2018-10-05T17:05:55.815Z,1538759155.815 [DataOverHttps](INFO): SBD MOMSN=8611877
2018-10-05T17:06:05.053Z,1538759165.053 [DataOverHttps](INFO): Sending 223 bytes from file Logs/20181004T041305/Express0644.lzma
2018-10-05T17:06:05.826Z,1538759165.826 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0644.lzma.bak
2018-10-05T17:06:05.826Z,1538759165.826 [DataOverHttps](INFO): SBD MOMSN=8611880
2018-10-05T17:06:06.851Z,1538759166.851 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T17:06:06.851Z,1538759166.851 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T17:06:06.851Z,1538759166.851 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T17:10:42.024Z,1538759442.024 [RDI_Pathfinder](ERROR): Failed to parse::SA,   +0.00,   +0.00,  0.00
2018-10-05T17:11:06.966Z,1538759466.966 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T17:11:06.967Z,1538759466.967 [Default:CheckIn:C.Wait] Stopped
2018-10-05T17:11:06.967Z,1538759466.967 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T17:11:06.967Z,1538759466.967 [Default:CheckIn:D] Running Loop=1
2018-10-05T17:11:07.387Z,1538759467.387 [Default:CheckIn:D] Stopped
2018-10-05T17:11:07.387Z,1538759467.387 [Default:CheckIn:E] Running Loop=1
2018-10-05T17:11:07.744Z,1538759467.744 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2214.660417 min 
2018-10-05T17:11:07.744Z,1538759467.744 [Default:CheckIn:E] Stopped
2018-10-05T17:11:07.744Z,1538759467.744 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T17:11:07.744Z,1538759467.744 [Default:CheckIn] Stopped
2018-10-05T17:11:07.744Z,1538759467.744 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T17:11:07.751Z,1538759467.751 [Default:CheckIn](INFO): Running loop #215
2018-10-05T17:11:07.752Z,1538759467.752 [Default:CheckIn] Running Loop=215
2018-10-05T17:11:07.752Z,1538759467.752 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T17:11:07.752Z,1538759467.752 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T17:11:23.319Z,1538759483.319 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T17:11:23.319Z,1538759483.319 [NAL9602] Data Fault, FailCount= 1
2018-10-05T17:11:23.319Z,1538759483.319 [NAL9602](ERROR): Data Fault
2018-10-05T17:11:23.432Z,1538759483.432 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T17:11:23.727Z,1538759483.727 [NAL9602](INFO): Powering down
2018-10-05T17:11:24.634Z,1538759484.634 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T17:11:24.634Z,1538759484.634 [NAL9602] No Fault, FailCount= 1
2018-10-05T17:11:53.967Z,1538759513.967 [NAL9602](INFO): Powering up NAL9602
2018-10-05T17:12:04.831Z,1538759524.831 [NAL9602](INFO): NAL9602 initialized
2018-10-05T17:13:35.950Z,1538759615.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:13:35.951Z,1538759615.951 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2018-10-05T17:13:35.951Z,1538759615.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:13:35.951Z,1538759615.951 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2018-10-05T17:13:36.338Z,1538759616.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:13:36.338Z,1538759616.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:13:36.338Z,1538759616.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:13:36.339Z,1538759616.339 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:13:36.339Z,1538759616.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:13:36.340Z,1538759616.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:16:10.278Z,1538759770.278 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T17:11:07.8Z
2018-10-05T17:16:10.278Z,1538759770.278 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T17:16:10.278Z,1538759770.278 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T17:16:11.107Z,1538759771.107 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0646.lzma
2018-10-05T17:16:11.906Z,1538759771.906 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0646.lzma.bak
2018-10-05T17:16:11.906Z,1538759771.906 [DataOverHttps](INFO): SBD MOMSN=8611886
2018-10-05T17:16:25.402Z,1538759785.402 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0647.lzma
2018-10-05T17:16:26.199Z,1538759786.199 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0647.lzma.bak
2018-10-05T17:16:26.199Z,1538759786.199 [DataOverHttps](INFO): SBD MOMSN=8611888
2018-10-05T17:16:28.065Z,1538759788.065 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T17:16:28.065Z,1538759788.065 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T17:16:28.065Z,1538759788.065 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T17:16:36.715Z,1538759796.715 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:16:36.715Z,1538759796.715 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-10-05T17:16:36.716Z,1538759796.716 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:16:36.722Z,1538759796.722 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:16:36.722Z,1538759796.722 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-05T17:16:36.722Z,1538759796.722 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:16:36.748Z,1538759796.748 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:16:36.748Z,1538759796.748 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:16:37.147Z,1538759797.147 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:16:37.147Z,1538759797.147 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-10-05T17:16:37.148Z,1538759797.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:16:37.148Z,1538759797.148 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-05T17:16:37.532Z,1538759797.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:16:37.533Z,1538759797.533 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:16:37.533Z,1538759797.533 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:16:37.534Z,1538759797.534 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:16:37.534Z,1538759797.534 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:16:37.535Z,1538759797.535 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:19:37.895Z,1538759977.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:19:37.895Z,1538759977.895 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-10-05T17:19:37.895Z,1538759977.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:19:37.902Z,1538759977.902 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:19:37.902Z,1538759977.902 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-05T17:19:37.902Z,1538759977.902 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:19:37.924Z,1538759977.924 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:19:37.925Z,1538759977.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:19:38.332Z,1538759978.332 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:19:38.333Z,1538759978.333 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-10-05T17:19:38.337Z,1538759978.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:19:38.337Z,1538759978.337 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-05T17:19:38.702Z,1538759978.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:19:38.702Z,1538759978.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:19:38.703Z,1538759978.703 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:19:38.703Z,1538759978.703 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:19:38.704Z,1538759978.704 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:19:38.704Z,1538759978.704 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:21:28.632Z,1538760088.632 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T17:21:28.632Z,1538760088.632 [Default:CheckIn:C.Wait] Stopped
2018-10-05T17:21:28.632Z,1538760088.632 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T17:21:28.632Z,1538760088.632 [Default:CheckIn:D] Running Loop=1
2018-10-05T17:21:29.030Z,1538760089.030 [Default:CheckIn:D] Stopped
2018-10-05T17:21:29.031Z,1538760089.031 [Default:CheckIn:E] Running Loop=1
2018-10-05T17:21:29.496Z,1538760089.496 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2225.020833 min 
2018-10-05T17:21:29.496Z,1538760089.496 [Default:CheckIn:E] Stopped
2018-10-05T17:21:29.503Z,1538760089.503 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T17:21:29.503Z,1538760089.503 [Default:CheckIn] Stopped
2018-10-05T17:21:29.503Z,1538760089.503 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T17:21:29.503Z,1538760089.503 [Default:CheckIn](INFO): Running loop #216
2018-10-05T17:21:29.503Z,1538760089.503 [Default:CheckIn] Running Loop=216
2018-10-05T17:21:29.503Z,1538760089.503 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T17:21:29.504Z,1538760089.504 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T17:22:07.108Z,1538760127.108 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T17:22:07.108Z,1538760127.108 [NAL9602] Data Fault, FailCount= 2
2018-10-05T17:22:07.108Z,1538760127.108 [NAL9602](ERROR): Data Fault
2018-10-05T17:22:07.169Z,1538760127.169 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T17:22:07.503Z,1538760127.503 [NAL9602](INFO): Powering down
2018-10-05T17:22:08.378Z,1538760128.378 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T17:22:08.378Z,1538760128.378 [NAL9602] No Fault, FailCount= 2
2018-10-05T17:22:37.667Z,1538760157.667 [NAL9602](INFO): Powering up NAL9602
2018-10-05T17:22:38.899Z,1538760158.899 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:22:38.899Z,1538760158.899 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-10-05T17:22:38.899Z,1538760158.899 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:22:38.905Z,1538760158.905 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:22:38.905Z,1538760158.905 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-05T17:22:38.905Z,1538760158.905 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:22:38.929Z,1538760158.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:22:38.930Z,1538760158.930 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:22:39.352Z,1538760159.352 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:22:39.352Z,1538760159.352 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-10-05T17:22:39.353Z,1538760159.353 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:22:39.353Z,1538760159.353 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-05T17:22:39.722Z,1538760159.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:22:39.722Z,1538760159.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:22:39.723Z,1538760159.723 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:22:39.723Z,1538760159.723 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:22:39.723Z,1538760159.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:22:39.724Z,1538760159.724 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:22:48.863Z,1538760168.863 [NAL9602](INFO): NAL9602 initialized
2018-10-05T17:25:39.926Z,1538760339.926 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:25:39.926Z,1538760339.926 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-10-05T17:25:39.926Z,1538760339.926 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:25:39.928Z,1538760339.928 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:25:39.928Z,1538760339.928 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-05T17:25:39.928Z,1538760339.928 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:25:39.977Z,1538760339.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:25:39.977Z,1538760339.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:25:40.299Z,1538760340.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:25:40.299Z,1538760340.299 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-10-05T17:25:40.300Z,1538760340.300 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:25:40.300Z,1538760340.300 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-05T17:25:40.698Z,1538760340.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:25:40.698Z,1538760340.698 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:25:40.699Z,1538760340.699 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:25:40.699Z,1538760340.699 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:25:40.700Z,1538760340.700 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:25:40.700Z,1538760340.700 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:25:57.238Z,1538760357.238 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-05T17:25:58.427Z,1538760358.427 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,37472.81
2018-10-05T17:26:08.833Z,1538760368.833 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T17:26:33.181Z,1538760393.181 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T17:21:29.5Z
2018-10-05T17:26:33.181Z,1538760393.181 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T17:26:33.181Z,1538760393.181 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T17:26:33.888Z,1538760393.888 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0649.lzma
2018-10-05T17:26:34.411Z,1538760394.411 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0649.lzma.bak
2018-10-05T17:26:34.411Z,1538760394.411 [DataOverHttps](INFO): SBD MOMSN=8611892
2018-10-05T17:26:44.544Z,1538760404.544 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0650.lzma
2018-10-05T17:26:45.335Z,1538760405.335 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0650.lzma.bak
2018-10-05T17:26:45.335Z,1538760405.335 [DataOverHttps](INFO): SBD MOMSN=8611894
2018-10-05T17:26:46.316Z,1538760406.316 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T17:26:46.316Z,1538760406.316 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T17:26:46.316Z,1538760406.316 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T17:28:05.278Z,1538760485.278 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T17:28:05.278Z,1538760485.278 [RDI_Pathfinder](ERROR): Failed to parse:
:HMc,0ffe, 15.894, -0.000, 0.000
2018-10-05T17:28:40.994Z,1538760520.994 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:28:40.994Z,1538760520.994 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-10-05T17:28:40.994Z,1538760520.994 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:28:40.996Z,1538760520.996 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:28:40.996Z,1538760520.996 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-05T17:28:40.996Z,1538760520.996 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:28:41.036Z,1538760521.036 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:28:41.036Z,1538760521.036 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:28:41.398Z,1538760521.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:28:41.398Z,1538760521.398 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-10-05T17:28:41.398Z,1538760521.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:28:41.398Z,1538760521.398 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-05T17:28:41.794Z,1538760521.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:28:41.794Z,1538760521.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:28:41.795Z,1538760521.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:28:41.795Z,1538760521.795 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:28:41.795Z,1538760521.795 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:28:41.796Z,1538760521.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:31:42.083Z,1538760702.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:31:42.083Z,1538760702.083 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-10-05T17:31:42.083Z,1538760702.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:31:42.089Z,1538760702.089 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:31:42.089Z,1538760702.089 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-05T17:31:42.089Z,1538760702.089 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:31:42.107Z,1538760702.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:31:42.107Z,1538760702.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:31:42.502Z,1538760702.502 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:31:42.502Z,1538760702.502 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-10-05T17:31:42.503Z,1538760702.503 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:31:42.503Z,1538760702.503 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-05T17:31:42.896Z,1538760702.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:31:42.896Z,1538760702.896 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:31:42.896Z,1538760702.896 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:31:42.897Z,1538760702.897 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:31:42.897Z,1538760702.897 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:31:42.898Z,1538760702.898 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:31:46.507Z,1538760706.507 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T17:31:46.508Z,1538760706.508 [Default:CheckIn:C.Wait] Stopped
2018-10-05T17:31:46.508Z,1538760706.508 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T17:31:46.508Z,1538760706.508 [Default:CheckIn:D] Running Loop=1
2018-10-05T17:31:46.891Z,1538760706.891 [Default:CheckIn:D] Stopped
2018-10-05T17:31:46.892Z,1538760706.892 [Default:CheckIn:E] Running Loop=1
2018-10-05T17:31:47.305Z,1538760707.305 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2235.318750 min 
2018-10-05T17:31:47.306Z,1538760707.306 [Default:CheckIn:E] Stopped
2018-10-05T17:31:47.306Z,1538760707.306 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T17:31:47.306Z,1538760707.306 [Default:CheckIn] Stopped
2018-10-05T17:31:47.306Z,1538760707.306 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T17:31:47.306Z,1538760707.306 [Default:CheckIn](INFO): Running loop #217
2018-10-05T17:31:47.306Z,1538760707.306 [Default:CheckIn] Running Loop=217
2018-10-05T17:31:47.306Z,1538760707.306 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T17:31:47.307Z,1538760707.307 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T17:32:52.035Z,1538760772.035 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T17:32:52.035Z,1538760772.035 [NAL9602] Data Fault, FailCount= 3
2018-10-05T17:32:52.035Z,1538760772.035 [NAL9602](ERROR): Data Fault
2018-10-05T17:32:52.105Z,1538760772.105 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T17:32:52.435Z,1538760772.435 [NAL9602](INFO): Powering down
2018-10-05T17:32:53.309Z,1538760773.309 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T17:32:53.309Z,1538760773.309 [NAL9602] No Fault, FailCount= 3
2018-10-05T17:33:22.523Z,1538760802.523 [NAL9602](INFO): Powering up NAL9602
2018-10-05T17:33:33.723Z,1538760813.723 [NAL9602](INFO): NAL9602 initialized
2018-10-05T17:34:43.183Z,1538760883.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:34:43.183Z,1538760883.183 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-10-05T17:34:43.183Z,1538760883.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:34:43.205Z,1538760883.205 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:34:43.205Z,1538760883.205 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-05T17:34:43.205Z,1538760883.205 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:34:43.244Z,1538760883.244 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:34:43.249Z,1538760883.249 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:34:43.617Z,1538760883.617 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:34:43.617Z,1538760883.617 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-10-05T17:34:43.618Z,1538760883.618 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:34:43.618Z,1538760883.618 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-05T17:34:43.974Z,1538760883.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:34:43.974Z,1538760883.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:34:43.975Z,1538760883.975 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:34:43.975Z,1538760883.975 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:34:43.975Z,1538760883.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:34:43.976Z,1538760883.976 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:36:49.480Z,1538761009.480 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T17:31:47.3Z
2018-10-05T17:36:49.480Z,1538761009.480 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T17:36:49.481Z,1538761009.481 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T17:36:54.508Z,1538761014.508 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0652.lzma
2018-10-05T17:36:55.291Z,1538761015.291 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0652.lzma.bak
2018-10-05T17:36:55.291Z,1538761015.291 [DataOverHttps](INFO): SBD MOMSN=8611898
2018-10-05T17:37:04.581Z,1538761024.581 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20181004T041305/Express0653.lzma
2018-10-05T17:37:05.369Z,1538761025.369 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0653.lzma.bak
2018-10-05T17:37:05.369Z,1538761025.369 [DataOverHttps](INFO): SBD MOMSN=8611900
2018-10-05T17:37:06.347Z,1538761026.347 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T17:37:06.347Z,1538761026.347 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T17:37:06.348Z,1538761026.348 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T17:37:45.374Z,1538761065.374 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:37:45.374Z,1538761065.374 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-10-05T17:37:45.374Z,1538761065.374 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:37:45.376Z,1538761065.376 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:37:45.376Z,1538761065.376 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-05T17:37:45.376Z,1538761065.376 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:37:45.389Z,1538761065.389 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:37:45.390Z,1538761065.390 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:37:45.522Z,1538761065.522 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:37:45.522Z,1538761065.522 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-10-05T17:37:45.522Z,1538761065.522 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:37:45.522Z,1538761065.522 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-05T17:37:45.846Z,1538761065.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:37:45.846Z,1538761065.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:37:45.847Z,1538761065.847 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:37:45.847Z,1538761065.847 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:37:45.847Z,1538761065.847 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:37:45.848Z,1538761065.848 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:37:48.276Z,1538761068.276 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T17:37:48.276Z,1538761068.276 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-3268,-32768,V
2018-10-05T17:40:45.919Z,1538761245.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:40:45.919Z,1538761245.919 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-10-05T17:40:45.919Z,1538761245.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:40:45.950Z,1538761245.950 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:40:45.950Z,1538761245.950 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-05T17:40:45.951Z,1538761245.951 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:40:45.983Z,1538761245.983 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:40:45.983Z,1538761245.983 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:40:46.364Z,1538761246.364 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:40:46.364Z,1538761246.364 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-10-05T17:40:46.369Z,1538761246.369 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:40:46.369Z,1538761246.369 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-05T17:40:46.727Z,1538761246.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:40:46.728Z,1538761246.728 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:40:46.728Z,1538761246.728 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:40:46.728Z,1538761246.728 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:40:46.730Z,1538761246.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:40:46.730Z,1538761246.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:42:06.505Z,1538761326.505 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T17:42:06.505Z,1538761326.505 [Default:CheckIn:C.Wait] Stopped
2018-10-05T17:42:06.505Z,1538761326.505 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T17:42:06.505Z,1538761326.505 [Default:CheckIn:D] Running Loop=1
2018-10-05T17:42:06.902Z,1538761326.902 [Default:CheckIn:D] Stopped
2018-10-05T17:42:06.902Z,1538761326.902 [Default:CheckIn:E] Running Loop=1
2018-10-05T17:42:07.304Z,1538761327.304 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2245.652344 min 
2018-10-05T17:42:07.305Z,1538761327.305 [Default:CheckIn:E] Stopped
2018-10-05T17:42:07.305Z,1538761327.305 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T17:42:07.305Z,1538761327.305 [Default:CheckIn] Stopped
2018-10-05T17:42:07.305Z,1538761327.305 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T17:42:07.305Z,1538761327.305 [Default:CheckIn](INFO): Running loop #218
2018-10-05T17:42:07.306Z,1538761327.306 [Default:CheckIn] Running Loop=218
2018-10-05T17:42:07.306Z,1538761327.306 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T17:42:07.306Z,1538761327.306 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T17:43:35.019Z,1538761415.019 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T17:43:35.019Z,1538761415.019 [NAL9602] Data Fault, FailCount= 4
2018-10-05T17:43:35.019Z,1538761415.019 [NAL9602](ERROR): Data Fault
2018-10-05T17:43:35.096Z,1538761415.096 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T17:43:38.225Z,1538761418.225 [NAL9602](INFO): Powering down
2018-10-05T17:43:38.800Z,1538761418.800 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T17:43:38.801Z,1538761418.801 [NAL9602] No Fault, FailCount= 4
2018-10-05T17:43:46.784Z,1538761426.784 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:43:46.784Z,1538761426.784 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-10-05T17:43:46.784Z,1538761426.784 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:43:46.786Z,1538761426.786 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:43:46.786Z,1538761426.786 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-05T17:43:46.786Z,1538761426.786 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:43:46.812Z,1538761426.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:43:46.812Z,1538761426.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:43:47.226Z,1538761427.226 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:43:47.226Z,1538761427.226 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-10-05T17:43:47.227Z,1538761427.227 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:43:47.227Z,1538761427.227 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-05T17:43:47.594Z,1538761427.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:43:47.594Z,1538761427.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:43:47.595Z,1538761427.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:43:47.595Z,1538761427.595 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:43:47.595Z,1538761427.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:43:47.596Z,1538761427.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:44:08.347Z,1538761448.347 [NAL9602](INFO): Powering up NAL9602
2018-10-05T17:44:19.227Z,1538761459.227 [NAL9602](INFO): NAL9602 initialized
2018-10-05T17:45:25.508Z,1538761525.508 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T17:46:47.831Z,1538761607.831 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:46:47.832Z,1538761607.832 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-10-05T17:46:47.832Z,1538761607.832 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:46:47.835Z,1538761607.835 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:46:47.835Z,1538761607.835 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-05T17:46:47.835Z,1538761607.835 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:46:47.864Z,1538761607.864 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:46:47.869Z,1538761607.869 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:46:48.294Z,1538761608.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:46:48.294Z,1538761608.294 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-10-05T17:46:48.294Z,1538761608.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:46:48.295Z,1538761608.295 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-05T17:46:48.656Z,1538761608.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:46:48.657Z,1538761608.657 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:46:48.657Z,1538761608.657 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:46:48.658Z,1538761608.658 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:46:48.658Z,1538761608.658 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:46:48.658Z,1538761608.658 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:47:09.900Z,1538761629.900 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T17:42:07.3Z
2018-10-05T17:47:09.900Z,1538761629.900 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T17:47:09.900Z,1538761629.900 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T17:47:14.876Z,1538761634.876 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0655.lzma
2018-10-05T17:47:15.650Z,1538761635.650 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0655.lzma.bak
2018-10-05T17:47:15.650Z,1538761635.650 [DataOverHttps](INFO): SBD MOMSN=8611904
2018-10-05T17:47:24.912Z,1538761644.912 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0656.lzma
2018-10-05T17:47:25.678Z,1538761645.678 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0656.lzma.bak
2018-10-05T17:47:25.678Z,1538761645.678 [DataOverHttps](INFO): SBD MOMSN=8611906
2018-10-05T17:47:26.659Z,1538761646.659 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T17:47:26.659Z,1538761646.659 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T17:47:26.659Z,1538761646.659 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T17:47:36.439Z,1538761656.439 [RDI_Pathfinder](ERROR): Failed to parse:
:H8c,0ffd, 15.847, -0.005, 0.000
2018-10-05T17:49:17.541Z,1538761757.541 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.894, -0.016, 0.000
2018-10-05T17:49:51.523Z,1538761791.523 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:49:51.523Z,1538761791.523 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-10-05T17:49:51.523Z,1538761791.523 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:49:51.531Z,1538761791.531 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:49:51.531Z,1538761791.531 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-05T17:49:51.531Z,1538761791.531 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:49:51.583Z,1538761791.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:49:51.583Z,1538761791.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:49:51.714Z,1538761791.714 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:49:51.714Z,1538761791.714 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-10-05T17:49:51.715Z,1538761791.715 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:49:51.715Z,1538761791.715 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-05T17:49:52.062Z,1538761792.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:49:52.062Z,1538761792.062 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:49:52.063Z,1538761792.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:49:52.063Z,1538761792.063 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:49:52.063Z,1538761792.063 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:49:52.064Z,1538761792.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:51:41.961Z,1538761901.961 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.887,*-0.012,*0.000
2018-10-05T17:52:26.852Z,1538761946.852 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T17:52:26.853Z,1538761946.853 [Default:CheckIn:C.Wait] Stopped
2018-10-05T17:52:26.853Z,1538761946.853 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T17:52:26.853Z,1538761946.853 [Default:CheckIn:D] Running Loop=1
2018-10-05T17:52:27.262Z,1538761947.262 [Default:CheckIn:D] Stopped
2018-10-05T17:52:27.262Z,1538761947.262 [Default:CheckIn:E] Running Loop=1
2018-10-05T17:52:27.641Z,1538761947.641 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2255.991667 min 
2018-10-05T17:52:27.641Z,1538761947.641 [Default:CheckIn:E] Stopped
2018-10-05T17:52:27.642Z,1538761947.642 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T17:52:27.642Z,1538761947.642 [Default:CheckIn] Stopped
2018-10-05T17:52:27.642Z,1538761947.642 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T17:52:27.642Z,1538761947.642 [Default:CheckIn](INFO): Running loop #219
2018-10-05T17:52:27.642Z,1538761947.642 [Default:CheckIn] Running Loop=219
2018-10-05T17:52:27.642Z,1538761947.642 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T17:52:27.642Z,1538761947.642 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T17:52:52.104Z,1538761972.104 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:52:52.105Z,1538761972.105 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-10-05T17:52:52.121Z,1538761972.121 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:52:52.123Z,1538761972.123 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:52:52.123Z,1538761972.123 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-05T17:52:52.123Z,1538761972.123 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:52:52.144Z,1538761972.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:52:52.149Z,1538761972.149 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:52:52.531Z,1538761972.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:52:52.531Z,1538761972.531 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-10-05T17:52:52.531Z,1538761972.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:52:52.532Z,1538761972.532 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-05T17:52:52.933Z,1538761972.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:52:52.934Z,1538761972.934 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:52:52.934Z,1538761972.934 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:52:52.934Z,1538761972.934 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:52:52.935Z,1538761972.935 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:52:52.935Z,1538761972.935 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:54:20.727Z,1538762060.727 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T17:54:20.727Z,1538762060.727 [NAL9602] Data Fault, FailCount= 5
2018-10-05T17:54:20.727Z,1538762060.727 [NAL9602](ERROR): Data Fault
2018-10-05T17:54:20.827Z,1538762060.827 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T17:54:20.827Z,1538762060.827 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T17:54:21.123Z,1538762061.123 [NAL9602](INFO): Powering down
2018-10-05T17:54:21.172Z,1538762061.172 [CBIT](INFO): Critical error at 20181005T175420
2018-10-05T17:55:03.611Z,1538762103.611 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T17:55:03.611Z,1538762103.611 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-3268,-32768,V
2018-10-05T17:55:39.684Z,1538762139.684 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T17:55:39.684Z,1538762139.684 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +     +0.00,   0.00,39247.85
2018-10-05T17:55:52.983Z,1538762152.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:55:52.983Z,1538762152.983 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-10-05T17:55:52.983Z,1538762152.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:55:52.985Z,1538762152.985 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:55:52.985Z,1538762152.985 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-05T17:55:52.985Z,1538762152.985 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:55:52.998Z,1538762152.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:55:52.999Z,1538762152.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:55:53.405Z,1538762153.405 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:55:53.405Z,1538762153.405 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-10-05T17:55:53.406Z,1538762153.406 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:55:53.406Z,1538762153.406 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-05T17:55:53.758Z,1538762153.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:55:53.758Z,1538762153.758 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:55:53.759Z,1538762153.759 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:55:53.759Z,1538762153.759 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:55:53.759Z,1538762153.759 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:55:53.760Z,1538762153.760 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:56:21.692Z,1538762181.692 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T17:56:21.692Z,1538762181.692 [NAL9602] No Fault, FailCount= 5
2018-10-05T17:56:21.742Z,1538762181.742 [NAL9602](INFO): Powering up NAL9602
2018-10-05T17:56:32.915Z,1538762192.915 [NAL9602](INFO): NAL9602 initialized
2018-10-05T17:57:30.280Z,1538762250.280 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T17:52:27.6Z
2018-10-05T17:57:30.280Z,1538762250.280 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T17:57:30.280Z,1538762250.280 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T17:57:35.379Z,1538762255.379 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0658.lzma
2018-10-05T17:57:36.148Z,1538762256.148 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0658.lzma.bak
2018-10-05T17:57:36.148Z,1538762256.148 [DataOverHttps](INFO): SBD MOMSN=8611910
2018-10-05T17:57:41.686Z,1538762261.686 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.880,*0.003,*65.535
2018-10-05T17:57:45.400Z,1538762265.400 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20181004T041305/Express0659.lzma
2018-10-05T17:57:46.180Z,1538762266.180 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0659.lzma.bak
2018-10-05T17:57:46.180Z,1538762266.180 [DataOverHttps](INFO): SBD MOMSN=8611913
2018-10-05T17:57:47.121Z,1538762267.121 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T17:57:47.121Z,1538762267.121 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T17:57:47.121Z,1538762267.121 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T17:58:53.791Z,1538762333.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:58:53.791Z,1538762333.791 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-10-05T17:58:53.791Z,1538762333.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T17:58:53.797Z,1538762333.797 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T17:58:53.797Z,1538762333.797 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-05T17:58:53.797Z,1538762333.797 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T17:58:53.822Z,1538762333.822 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T17:58:53.823Z,1538762333.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T17:58:54.238Z,1538762334.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T17:58:54.238Z,1538762334.238 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-10-05T17:58:54.239Z,1538762334.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T17:58:54.239Z,1538762334.239 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-05T17:58:54.604Z,1538762334.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T17:58:54.604Z,1538762334.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:58:54.605Z,1538762334.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T17:58:54.609Z,1538762334.609 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T17:58:54.610Z,1538762334.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T17:58:54.610Z,1538762334.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:01:54.697Z,1538762514.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:01:54.697Z,1538762514.697 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-10-05T18:01:54.697Z,1538762514.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:01:54.699Z,1538762514.699 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:01:54.699Z,1538762514.699 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-05T18:01:54.699Z,1538762514.699 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:01:54.713Z,1538762514.713 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:01:54.713Z,1538762514.713 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:01:57.927Z,1538762517.927 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:01:57.927Z,1538762517.927 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-10-05T18:01:57.927Z,1538762517.927 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:01:57.927Z,1538762517.927 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-05T18:01:58.026Z,1538762518.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:01:58.027Z,1538762518.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:01:58.027Z,1538762518.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:01:58.028Z,1538762518.028 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:01:58.028Z,1538762518.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:01:58.028Z,1538762518.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:02:47.370Z,1538762567.370 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T18:02:47.370Z,1538762567.370 [Default:CheckIn:C.Wait] Stopped
2018-10-05T18:02:47.371Z,1538762567.371 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T18:02:47.371Z,1538762567.371 [Default:CheckIn:D] Running Loop=1
2018-10-05T18:02:47.749Z,1538762567.749 [Default:CheckIn:D] Stopped
2018-10-05T18:02:47.749Z,1538762567.749 [Default:CheckIn:E] Running Loop=1
2018-10-05T18:02:48.129Z,1538762568.129 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2266.333073 min 
2018-10-05T18:02:48.129Z,1538762568.129 [Default:CheckIn:E] Stopped
2018-10-05T18:02:48.129Z,1538762568.129 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T18:02:48.129Z,1538762568.129 [Default:CheckIn] Stopped
2018-10-05T18:02:48.129Z,1538762568.129 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T18:02:48.129Z,1538762568.129 [Default:CheckIn](INFO): Running loop #220
2018-10-05T18:02:48.130Z,1538762568.130 [Default:CheckIn] Running Loop=220
2018-10-05T18:02:48.130Z,1538762568.130 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T18:02:48.130Z,1538762568.130 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T18:04:58.123Z,1538762698.123 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:04:58.123Z,1538762698.123 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-10-05T18:04:58.123Z,1538762698.123 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:04:58.125Z,1538762698.125 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:04:58.125Z,1538762698.125 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-05T18:04:58.125Z,1538762698.125 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:04:58.155Z,1538762698.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:04:58.155Z,1538762698.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:04:58.552Z,1538762698.552 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:04:58.552Z,1538762698.552 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-10-05T18:04:58.553Z,1538762698.553 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:04:58.553Z,1538762698.553 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-05T18:04:58.914Z,1538762698.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:04:58.914Z,1538762698.914 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:04:58.915Z,1538762698.915 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:04:58.915Z,1538762698.915 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:04:58.915Z,1538762698.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:04:58.916Z,1538762698.916 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:06:34.687Z,1538762794.687 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T18:06:34.687Z,1538762794.687 [NAL9602] Data Fault, FailCount= 1
2018-10-05T18:06:34.687Z,1538762794.687 [NAL9602](ERROR): Data Fault
2018-10-05T18:06:34.757Z,1538762794.757 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T18:06:35.087Z,1538762795.087 [NAL9602](INFO): Powering down
2018-10-05T18:06:36.009Z,1538762796.009 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T18:06:36.009Z,1538762796.009 [NAL9602] No Fault, FailCount= 1
2018-10-05T18:07:05.207Z,1538762825.207 [NAL9602](INFO): Powering up NAL9602
2018-10-05T18:07:16.122Z,1538762836.122 [NAL9602](INFO): NAL9602 initialized
2018-10-05T18:07:50.977Z,1538762870.977 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T18:02:48.1Z
2018-10-05T18:07:50.977Z,1538762870.977 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T18:07:50.978Z,1538762870.978 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T18:07:55.903Z,1538762875.903 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0661.lzma
2018-10-05T18:07:56.734Z,1538762876.734 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0661.lzma.bak
2018-10-05T18:07:56.735Z,1538762876.735 [DataOverHttps](INFO): SBD MOMSN=8611917
2018-10-05T18:08:00.978Z,1538762880.978 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:08:00.978Z,1538762880.978 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-10-05T18:08:00.978Z,1538762880.978 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:08:00.980Z,1538762880.980 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:08:00.980Z,1538762880.980 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-05T18:08:00.980Z,1538762880.980 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:08:01.029Z,1538762881.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:08:01.029Z,1538762881.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:08:01.150Z,1538762881.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:08:01.150Z,1538762881.150 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-10-05T18:08:01.151Z,1538762881.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:08:01.151Z,1538762881.151 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-05T18:08:01.521Z,1538762881.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:08:01.522Z,1538762881.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:08:01.523Z,1538762881.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:08:01.523Z,1538762881.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:08:01.524Z,1538762881.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:08:01.525Z,1538762881.525 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:08:05.960Z,1538762885.960 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0662.lzma
2018-10-05T18:08:06.746Z,1538762886.746 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0662.lzma.bak
2018-10-05T18:08:06.746Z,1538762886.746 [DataOverHttps](INFO): SBD MOMSN=8611919
2018-10-05T18:08:07.744Z,1538762887.744 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T18:08:07.745Z,1538762887.745 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T18:08:07.745Z,1538762887.745 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T18:11:01.907Z,1538763061.907 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:11:01.907Z,1538763061.907 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-10-05T18:11:01.908Z,1538763061.908 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:11:01.910Z,1538763061.910 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:11:01.910Z,1538763061.910 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-05T18:11:01.910Z,1538763061.910 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:11:01.923Z,1538763061.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:11:01.923Z,1538763061.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:11:02.326Z,1538763062.326 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:11:02.326Z,1538763062.326 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-10-05T18:11:02.327Z,1538763062.327 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:11:02.327Z,1538763062.327 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-05T18:11:02.703Z,1538763062.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:11:02.703Z,1538763062.703 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:11:02.704Z,1538763062.704 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:11:02.704Z,1538763062.704 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:11:02.704Z,1538763062.704 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:11:02.705Z,1538763062.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:13:07.902Z,1538763187.902 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T18:13:07.903Z,1538763187.903 [Default:CheckIn:C.Wait] Stopped
2018-10-05T18:13:07.903Z,1538763187.903 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T18:13:07.903Z,1538763187.903 [Default:CheckIn:D] Running Loop=1
2018-10-05T18:13:08.307Z,1538763188.307 [Default:CheckIn:D] Stopped
2018-10-05T18:13:08.307Z,1538763188.307 [Default:CheckIn:E] Running Loop=1
2018-10-05T18:13:08.699Z,1538763188.699 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2276.675521 min 
2018-10-05T18:13:08.699Z,1538763188.699 [Default:CheckIn:E] Stopped
2018-10-05T18:13:08.699Z,1538763188.699 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T18:13:08.700Z,1538763188.700 [Default:CheckIn] Stopped
2018-10-05T18:13:08.700Z,1538763188.700 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T18:13:08.700Z,1538763188.700 [Default:CheckIn](INFO): Running loop #221
2018-10-05T18:13:08.700Z,1538763188.700 [Default:CheckIn] Running Loop=221
2018-10-05T18:13:08.700Z,1538763188.700 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T18:13:08.700Z,1538763188.700 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T18:14:04.414Z,1538763244.414 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:14:04.414Z,1538763244.414 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-10-05T18:14:04.414Z,1538763244.414 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:14:04.416Z,1538763244.416 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:14:04.416Z,1538763244.416 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-05T18:14:04.416Z,1538763244.416 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:14:04.430Z,1538763244.430 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:14:04.430Z,1538763244.430 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:14:04.563Z,1538763244.563 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:14:04.563Z,1538763244.563 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-10-05T18:14:04.563Z,1538763244.563 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:14:04.563Z,1538763244.563 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-05T18:14:04.894Z,1538763244.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:14:04.894Z,1538763244.894 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:14:04.895Z,1538763244.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:14:04.895Z,1538763244.895 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:14:04.895Z,1538763244.895 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:14:04.896Z,1538763244.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:16:10.730Z,1538763370.730 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T18:17:05.023Z,1538763425.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:17:05.023Z,1538763425.023 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-10-05T18:17:05.023Z,1538763425.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:17:05.029Z,1538763425.029 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:17:05.029Z,1538763425.029 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-10-05T18:17:05.030Z,1538763425.030 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:17:05.055Z,1538763425.055 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:17:05.055Z,1538763425.055 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:17:05.466Z,1538763425.466 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:17:05.466Z,1538763425.466 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-10-05T18:17:05.466Z,1538763425.466 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:17:05.466Z,1538763425.466 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-10-05T18:17:05.818Z,1538763425.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:17:05.818Z,1538763425.818 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:17:05.819Z,1538763425.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:17:05.819Z,1538763425.819 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:17:05.820Z,1538763425.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:17:05.820Z,1538763425.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:17:18.987Z,1538763438.987 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T18:17:18.987Z,1538763438.987 [NAL9602] Data Fault, FailCount= 2
2018-10-05T18:17:18.987Z,1538763438.987 [NAL9602](ERROR): Data Fault
2018-10-05T18:17:19.060Z,1538763439.060 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T18:17:19.391Z,1538763439.391 [NAL9602](INFO): Powering down
2018-10-05T18:17:20.263Z,1538763440.263 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T18:17:20.263Z,1538763440.263 [NAL9602] No Fault, FailCount= 2
2018-10-05T18:17:49.467Z,1538763469.467 [NAL9602](INFO): Powering up NAL9602
2018-10-05T18:18:00.267Z,1538763480.267 [NAL9602](INFO): NAL9602 initialized
2018-10-05T18:18:11.542Z,1538763491.542 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T18:13:08.7Z
2018-10-05T18:18:11.542Z,1538763491.542 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T18:18:11.542Z,1538763491.542 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T18:18:16.506Z,1538763496.506 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0664.lzma
2018-10-05T18:18:17.294Z,1538763497.294 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0664.lzma.bak
2018-10-05T18:18:17.294Z,1538763497.294 [DataOverHttps](INFO): SBD MOMSN=8611921
2018-10-05T18:18:26.797Z,1538763506.797 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0665.lzma
2018-10-05T18:18:27.562Z,1538763507.562 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0665.lzma.bak
2018-10-05T18:18:27.562Z,1538763507.562 [DataOverHttps](INFO): SBD MOMSN=8611923
2018-10-05T18:18:28.550Z,1538763508.550 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T18:18:28.550Z,1538763508.550 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T18:18:28.550Z,1538763508.550 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T18:19:18.404Z,1538763558.404 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T18:19:18.404Z,1538763558.404 [RDI_Pathfinder](ERROR): Failed to parse:
:TSI,-32768,-32768,-32768,-32768,V
2018-10-05T18:20:06.122Z,1538763606.122 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:20:06.122Z,1538763606.122 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-10-05T18:20:06.122Z,1538763606.122 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:20:06.124Z,1538763606.124 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:20:06.124Z,1538763606.124 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-10-05T18:20:06.124Z,1538763606.124 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:20:06.140Z,1538763606.140 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:20:06.141Z,1538763606.141 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:20:06.535Z,1538763606.535 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:20:06.535Z,1538763606.535 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-10-05T18:20:06.535Z,1538763606.535 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:20:06.535Z,1538763606.535 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-10-05T18:20:06.922Z,1538763606.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:20:06.923Z,1538763606.923 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:20:06.923Z,1538763606.923 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:20:06.924Z,1538763606.924 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:20:06.924Z,1538763606.924 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:20:06.924Z,1538763606.924 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:23:07.192Z,1538763787.192 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:23:07.192Z,1538763787.192 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-10-05T18:23:07.192Z,1538763787.192 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:23:07.194Z,1538763787.194 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:23:07.194Z,1538763787.194 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-10-05T18:23:07.194Z,1538763787.194 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:23:07.220Z,1538763787.220 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:23:07.220Z,1538763787.220 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:23:07.618Z,1538763787.618 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:23:07.618Z,1538763787.618 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-10-05T18:23:07.619Z,1538763787.619 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:23:07.619Z,1538763787.619 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-10-05T18:23:07.959Z,1538763787.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:23:07.960Z,1538763787.960 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:23:07.960Z,1538763787.960 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:23:07.960Z,1538763787.960 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:23:07.973Z,1538763787.973 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:23:07.973Z,1538763787.973 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:23:28.912Z,1538763808.912 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T18:23:28.913Z,1538763808.913 [Default:CheckIn:C.Wait] Stopped
2018-10-05T18:23:28.913Z,1538763808.913 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T18:23:28.913Z,1538763808.913 [Default:CheckIn:D] Running Loop=1
2018-10-05T18:23:29.322Z,1538763809.322 [Default:CheckIn:D] Stopped
2018-10-05T18:23:29.322Z,1538763809.322 [Default:CheckIn:E] Running Loop=1
2018-10-05T18:23:29.717Z,1538763809.717 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2287.025781 min 
2018-10-05T18:23:29.717Z,1538763809.717 [Default:CheckIn:E] Stopped
2018-10-05T18:23:29.717Z,1538763809.717 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T18:23:29.717Z,1538763809.717 [Default:CheckIn] Stopped
2018-10-05T18:23:29.717Z,1538763809.717 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T18:23:29.718Z,1538763809.718 [Default:CheckIn](INFO): Running loop #222
2018-10-05T18:23:29.718Z,1538763809.718 [Default:CheckIn] Running Loop=222
2018-10-05T18:23:29.718Z,1538763809.718 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T18:23:29.718Z,1538763809.718 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T18:26:10.871Z,1538763970.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:26:10.871Z,1538763970.871 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-10-05T18:26:10.871Z,1538763970.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:26:10.873Z,1538763970.873 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:26:10.873Z,1538763970.873 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-10-05T18:26:10.873Z,1538763970.873 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:26:10.903Z,1538763970.903 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:26:10.903Z,1538763970.903 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:26:11.042Z,1538763971.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:26:11.042Z,1538763971.042 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-10-05T18:26:11.043Z,1538763971.043 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:26:11.043Z,1538763971.043 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-10-05T18:26:11.389Z,1538763971.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:26:11.390Z,1538763971.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:26:11.390Z,1538763971.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:26:11.391Z,1538763971.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:26:11.391Z,1538763971.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:26:11.391Z,1538763971.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:28:01.371Z,1538764081.371 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T18:28:01.371Z,1538764081.371 [NAL9602] Data Fault, FailCount= 3
2018-10-05T18:28:01.371Z,1538764081.371 [NAL9602](ERROR): Data Fault
2018-10-05T18:28:01.463Z,1538764081.463 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T18:28:01.779Z,1538764081.779 [NAL9602](INFO): Powering down
2018-10-05T18:28:02.643Z,1538764082.643 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T18:28:02.643Z,1538764082.643 [NAL9602] No Fault, FailCount= 3
2018-10-05T18:28:31.853Z,1538764111.853 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T18:23:29.7Z
2018-10-05T18:28:31.853Z,1538764111.853 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T18:28:31.853Z,1538764111.853 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T18:28:31.923Z,1538764111.923 [NAL9602](INFO): Powering up NAL9602
2018-10-05T18:28:36.785Z,1538764116.785 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0667.lzma
2018-10-05T18:28:37.554Z,1538764117.554 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0667.lzma.bak
2018-10-05T18:28:37.555Z,1538764117.555 [DataOverHttps](INFO): SBD MOMSN=8611925
2018-10-05T18:28:42.775Z,1538764122.775 [NAL9602](INFO): NAL9602 initialized
2018-10-05T18:28:46.556Z,1538764126.556 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0668.lzma
2018-10-05T18:28:47.322Z,1538764127.322 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0668.lzma.bak
2018-10-05T18:28:47.322Z,1538764127.322 [DataOverHttps](INFO): SBD MOMSN=8611927
2018-10-05T18:28:48.312Z,1538764128.312 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T18:28:48.313Z,1538764128.313 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T18:28:48.313Z,1538764128.313 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T18:29:11.467Z,1538764151.467 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:29:11.467Z,1538764151.467 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-10-05T18:29:11.467Z,1538764151.467 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:29:11.474Z,1538764151.474 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:29:11.474Z,1538764151.474 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-10-05T18:29:11.474Z,1538764151.474 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:29:11.528Z,1538764151.528 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:29:11.529Z,1538764151.529 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:29:11.901Z,1538764151.901 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:29:11.901Z,1538764151.901 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-10-05T18:29:11.902Z,1538764151.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:29:11.902Z,1538764151.902 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-10-05T18:29:12.246Z,1538764152.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:29:12.246Z,1538764152.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:29:12.247Z,1538764152.247 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:29:12.247Z,1538764152.247 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:29:12.248Z,1538764152.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:29:12.248Z,1538764152.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:31:00.728Z,1538764260.728 [RDI_Pathfinder](ERROR): DVL BIT error. See manual. Result code: -32768
2018-10-05T18:31:00.730Z,1538764260.730 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-05T18:32:06.914Z,1538764326.914 [BPC1](ERROR): BPC1A: No match for stick with serial number:1717 in the onboard configuration file.
2018-10-05T18:32:12.573Z,1538764332.573 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:32:12.573Z,1538764332.573 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-10-05T18:32:12.573Z,1538764332.573 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:32:12.575Z,1538764332.575 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:32:12.575Z,1538764332.575 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-10-05T18:32:12.575Z,1538764332.575 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:32:12.606Z,1538764332.606 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:32:12.606Z,1538764332.606 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:32:12.943Z,1538764332.943 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:32:12.943Z,1538764332.943 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-10-05T18:32:12.943Z,1538764332.943 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:32:12.943Z,1538764332.943 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-10-05T18:32:13.342Z,1538764333.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:32:13.343Z,1538764333.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:32:13.343Z,1538764333.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:32:13.343Z,1538764333.343 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:32:13.344Z,1538764333.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:32:13.344Z,1538764333.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:33:36.542Z,1538764416.542 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T18:33:48.517Z,1538764428.517 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T18:33:48.521Z,1538764428.521 [Default:CheckIn:C.Wait] Stopped
2018-10-05T18:33:48.521Z,1538764428.521 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T18:33:48.521Z,1538764428.521 [Default:CheckIn:D] Running Loop=1
2018-10-05T18:33:48.909Z,1538764428.909 [Default:CheckIn:D] Stopped
2018-10-05T18:33:48.909Z,1538764428.909 [Default:CheckIn:E] Running Loop=1
2018-10-05T18:33:49.326Z,1538764429.326 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2297.352344 min 
2018-10-05T18:33:49.326Z,1538764429.326 [Default:CheckIn:E] Stopped
2018-10-05T18:33:49.326Z,1538764429.326 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T18:33:49.327Z,1538764429.327 [Default:CheckIn] Stopped
2018-10-05T18:33:49.327Z,1538764429.327 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T18:33:49.327Z,1538764429.327 [Default:CheckIn](INFO): Running loop #223
2018-10-05T18:33:49.327Z,1538764429.327 [Default:CheckIn] Running Loop=223
2018-10-05T18:33:49.327Z,1538764429.327 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T18:33:49.327Z,1538764429.327 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T18:35:13.506Z,1538764513.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:35:13.506Z,1538764513.506 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-10-05T18:35:13.506Z,1538764513.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:35:13.508Z,1538764513.508 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:35:13.508Z,1538764513.508 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-10-05T18:35:13.508Z,1538764513.508 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:35:13.530Z,1538764513.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:35:13.531Z,1538764513.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:35:13.903Z,1538764513.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:35:13.904Z,1538764513.904 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-10-05T18:35:13.904Z,1538764513.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:35:13.904Z,1538764513.904 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-10-05T18:35:14.293Z,1538764514.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:35:14.294Z,1538764514.294 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:35:14.294Z,1538764514.294 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:35:14.295Z,1538764514.295 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:35:14.295Z,1538764514.295 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:35:14.296Z,1538764514.296 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:38:16.190Z,1538764696.190 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:38:16.190Z,1538764696.190 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-10-05T18:38:16.190Z,1538764696.190 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:38:16.192Z,1538764696.192 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:38:16.192Z,1538764696.192 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-10-05T18:38:16.192Z,1538764696.192 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:38:16.205Z,1538764696.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:38:16.206Z,1538764696.206 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:38:16.357Z,1538764696.357 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:38:16.357Z,1538764696.357 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-10-05T18:38:16.358Z,1538764696.358 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:38:16.358Z,1538764696.358 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-10-05T18:38:16.662Z,1538764696.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:38:16.662Z,1538764696.662 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:38:16.663Z,1538764696.663 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:38:16.663Z,1538764696.663 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:38:16.663Z,1538764696.663 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:38:16.664Z,1538764696.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:38:46.623Z,1538764726.623 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T18:38:46.623Z,1538764726.623 [NAL9602] Data Fault, FailCount= 4
2018-10-05T18:38:46.623Z,1538764726.623 [NAL9602](ERROR): Data Fault
2018-10-05T18:38:46.708Z,1538764726.708 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T18:38:47.023Z,1538764727.023 [NAL9602](INFO): Powering down
2018-10-05T18:38:47.883Z,1538764727.883 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T18:38:47.884Z,1538764727.884 [NAL9602] No Fault, FailCount= 4
2018-10-05T18:38:51.542Z,1538764731.542 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T18:33:49.3Z
2018-10-05T18:38:51.542Z,1538764731.542 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T18:38:51.542Z,1538764731.542 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T18:38:56.472Z,1538764736.472 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0670.lzma
2018-10-05T18:38:57.270Z,1538764737.270 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0670.lzma.bak
2018-10-05T18:38:57.270Z,1538764737.270 [DataOverHttps](INFO): SBD MOMSN=8611929
2018-10-05T18:39:02.799Z,1538764742.799 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-05T18:39:06.480Z,1538764746.480 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0671.lzma
2018-10-05T18:39:07.262Z,1538764747.262 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0671.lzma.bak
2018-10-05T18:39:07.262Z,1538764747.262 [DataOverHttps](INFO): SBD MOMSN=8611931
2018-10-05T18:39:08.232Z,1538764748.232 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T18:39:08.232Z,1538764748.232 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T18:39:08.233Z,1538764748.233 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T18:39:17.259Z,1538764757.259 [NAL9602](INFO): Powering up NAL9602
2018-10-05T18:39:28.459Z,1538764768.459 [NAL9602](INFO): NAL9602 initialized
2018-10-05T18:41:16.735Z,1538764876.735 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:41:16.735Z,1538764876.735 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-10-05T18:41:16.735Z,1538764876.735 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:41:16.741Z,1538764876.741 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:41:16.742Z,1538764876.742 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-10-05T18:41:16.742Z,1538764876.742 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:41:16.763Z,1538764876.763 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:41:16.763Z,1538764876.763 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:41:17.180Z,1538764877.180 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:41:17.180Z,1538764877.180 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-10-05T18:41:17.181Z,1538764877.181 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:41:17.181Z,1538764877.181 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-10-05T18:41:17.562Z,1538764877.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:41:17.562Z,1538764877.562 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:41:17.563Z,1538764877.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:41:17.563Z,1538764877.563 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:41:17.563Z,1538764877.563 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:41:17.564Z,1538764877.564 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:42:39.594Z,1538764959.594 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T18:42:39.595Z,1538764959.595 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100511473783,35.0, -0.1,   0.0, 0
2018-10-05T18:44:08.651Z,1538765048.651 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T18:44:08.651Z,1538765048.651 [Default:CheckIn:C.Wait] Stopped
2018-10-05T18:44:08.651Z,1538765048.651 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T18:44:08.651Z,1538765048.651 [Default:CheckIn:D] Running Loop=1
2018-10-05T18:44:09.041Z,1538765049.041 [Default:CheckIn:D] Stopped
2018-10-05T18:44:09.041Z,1538765049.041 [Default:CheckIn:E] Running Loop=1
2018-10-05T18:44:09.460Z,1538765049.460 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2307.687760 min 
2018-10-05T18:44:09.460Z,1538765049.460 [Default:CheckIn:E] Stopped
2018-10-05T18:44:09.465Z,1538765049.465 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T18:44:09.465Z,1538765049.465 [Default:CheckIn] Stopped
2018-10-05T18:44:09.465Z,1538765049.465 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T18:44:09.465Z,1538765049.465 [Default:CheckIn](INFO): Running loop #224
2018-10-05T18:44:09.465Z,1538765049.465 [Default:CheckIn] Running Loop=224
2018-10-05T18:44:09.466Z,1538765049.466 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T18:44:09.466Z,1538765049.466 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T18:44:17.853Z,1538765057.853 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:44:17.854Z,1538765057.854 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-10-05T18:44:17.854Z,1538765057.854 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:44:17.856Z,1538765057.856 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:44:17.856Z,1538765057.856 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-10-05T18:44:17.856Z,1538765057.856 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:44:17.870Z,1538765057.870 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:44:17.870Z,1538765057.870 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:44:18.278Z,1538765058.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:44:18.279Z,1538765058.279 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-10-05T18:44:18.279Z,1538765058.279 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:44:18.279Z,1538765058.279 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-10-05T18:44:18.630Z,1538765058.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:44:18.630Z,1538765058.630 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:44:18.631Z,1538765058.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:44:18.631Z,1538765058.631 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:44:18.631Z,1538765058.631 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:44:18.632Z,1538765058.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:45:48.560Z,1538765148.560 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.887, -0.008, 0.000
2018-10-05T18:46:06.167Z,1538765166.167 [RDI_Pathfinder](ERROR): only read 1 of 1 data item for altitude
2018-10-05T18:46:06.167Z,1538765166.167 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G0ffd, 15.894, 0.007, 65.535
2018-10-05T18:47:18.808Z,1538765238.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:47:18.808Z,1538765238.808 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-10-05T18:47:18.808Z,1538765238.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:47:18.810Z,1538765238.810 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:47:18.810Z,1538765238.810 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-10-05T18:47:18.810Z,1538765238.810 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:47:18.824Z,1538765238.824 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:47:18.824Z,1538765238.824 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:47:19.243Z,1538765239.243 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:47:19.243Z,1538765239.243 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-10-05T18:47:19.244Z,1538765239.244 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:47:19.244Z,1538765239.244 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-10-05T18:47:19.626Z,1538765239.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:47:19.626Z,1538765239.626 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:47:19.627Z,1538765239.627 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:47:19.627Z,1538765239.627 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:47:19.627Z,1538765239.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:47:19.628Z,1538765239.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:49:11.573Z,1538765351.573 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T18:44:09.5Z
2018-10-05T18:49:11.573Z,1538765351.573 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T18:49:11.573Z,1538765351.573 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T18:49:16.490Z,1538765356.490 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0673.lzma
2018-10-05T18:49:17.270Z,1538765357.270 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0673.lzma.bak
2018-10-05T18:49:17.270Z,1538765357.270 [DataOverHttps](INFO): SBD MOMSN=8611933
2018-10-05T18:49:26.440Z,1538765366.440 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20181004T041305/Express0674.lzma
2018-10-05T18:49:27.239Z,1538765367.239 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0674.lzma.bak
2018-10-05T18:49:27.239Z,1538765367.239 [DataOverHttps](INFO): SBD MOMSN=8611935
2018-10-05T18:49:28.218Z,1538765368.218 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T18:49:28.218Z,1538765368.218 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T18:49:28.219Z,1538765368.219 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T18:49:31.418Z,1538765371.418 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T18:49:31.418Z,1538765371.418 [NAL9602] Data Fault, FailCount= 5
2018-10-05T18:49:31.418Z,1538765371.418 [NAL9602](ERROR): Data Fault
2018-10-05T18:49:31.541Z,1538765371.541 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T18:49:31.542Z,1538765371.542 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T18:49:31.596Z,1538765371.596 [NAL9602](INFO): Powering down
2018-10-05T18:49:31.678Z,1538765371.678 [CBIT](INFO): Critical error at 20181005T184931
2018-10-05T18:49:32.800Z,1538765372.800 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,42467.23
2018-10-05T18:50:19.697Z,1538765419.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:50:19.697Z,1538765419.697 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-10-05T18:50:19.697Z,1538765419.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:50:19.699Z,1538765419.699 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:50:19.699Z,1538765419.699 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-10-05T18:50:19.699Z,1538765419.699 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:50:19.734Z,1538765419.734 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:50:19.734Z,1538765419.734 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:50:20.124Z,1538765420.124 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:50:20.124Z,1538765420.124 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-10-05T18:50:20.129Z,1538765420.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:50:20.129Z,1538765420.129 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-10-05T18:50:20.534Z,1538765420.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:50:20.534Z,1538765420.534 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:50:20.535Z,1538765420.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:50:20.535Z,1538765420.535 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:50:20.535Z,1538765420.535 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:50:20.536Z,1538765420.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:51:31.592Z,1538765491.592 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T18:51:31.592Z,1538765491.592 [NAL9602] No Fault, FailCount= 5
2018-10-05T18:51:31.895Z,1538765491.895 [NAL9602](INFO): Powering up NAL9602
2018-10-05T18:51:42.695Z,1538765502.695 [NAL9602](INFO): NAL9602 initialized
2018-10-05T18:53:20.651Z,1538765600.651 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:53:20.651Z,1538765600.651 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-10-05T18:53:20.651Z,1538765600.651 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:53:20.657Z,1538765600.657 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:53:20.657Z,1538765600.657 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-10-05T18:53:20.657Z,1538765600.657 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:53:20.679Z,1538765600.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:53:20.679Z,1538765600.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:53:21.069Z,1538765601.069 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:53:21.069Z,1538765601.069 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-10-05T18:53:21.070Z,1538765601.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:53:21.070Z,1538765601.070 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-10-05T18:53:21.438Z,1538765601.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:53:21.439Z,1538765601.439 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:53:21.439Z,1538765601.439 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:53:21.440Z,1538765601.440 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:53:21.445Z,1538765601.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:53:21.445Z,1538765601.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:54:28.452Z,1538765668.452 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T18:54:28.453Z,1538765668.453 [Default:CheckIn:C.Wait] Stopped
2018-10-05T18:54:28.453Z,1538765668.453 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T18:54:28.453Z,1538765668.453 [Default:CheckIn:D] Running Loop=1
2018-10-05T18:54:28.849Z,1538765668.849 [Default:CheckIn:D] Stopped
2018-10-05T18:54:28.849Z,1538765668.849 [Default:CheckIn:E] Running Loop=1
2018-10-05T18:54:29.263Z,1538765669.263 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2318.017969 min 
2018-10-05T18:54:29.263Z,1538765669.263 [Default:CheckIn:E] Stopped
2018-10-05T18:54:29.263Z,1538765669.263 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T18:54:29.263Z,1538765669.263 [Default:CheckIn] Stopped
2018-10-05T18:54:29.263Z,1538765669.263 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T18:54:29.264Z,1538765669.264 [Default:CheckIn](INFO): Running loop #225
2018-10-05T18:54:29.264Z,1538765669.264 [Default:CheckIn] Running Loop=225
2018-10-05T18:54:29.264Z,1538765669.264 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T18:54:29.264Z,1538765669.264 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T18:56:21.557Z,1538765781.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:56:21.557Z,1538765781.557 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-10-05T18:56:21.557Z,1538765781.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:56:21.559Z,1538765781.559 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:56:21.559Z,1538765781.559 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-10-05T18:56:21.559Z,1538765781.559 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:56:21.617Z,1538765781.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:56:21.617Z,1538765781.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:56:21.962Z,1538765781.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:56:21.963Z,1538765781.963 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-10-05T18:56:21.963Z,1538765781.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:56:21.963Z,1538765781.963 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-10-05T18:56:22.318Z,1538765782.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:56:22.319Z,1538765782.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:56:22.319Z,1538765782.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:56:22.319Z,1538765782.319 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:56:22.320Z,1538765782.320 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:56:22.320Z,1538765782.320 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:56:36.432Z,1538765796.432 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8b,0ffd, 15.887, -0.008, 0.000
2018-10-05T18:59:22.450Z,1538765962.450 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:59:22.450Z,1538765962.450 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-10-05T18:59:22.451Z,1538765962.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T18:59:22.458Z,1538765962.458 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T18:59:22.459Z,1538765962.459 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-10-05T18:59:22.459Z,1538765962.459 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T18:59:22.502Z,1538765962.502 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T18:59:22.503Z,1538765962.503 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T18:59:22.892Z,1538765962.892 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T18:59:22.892Z,1538765962.892 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-10-05T18:59:22.892Z,1538765962.892 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T18:59:22.892Z,1538765962.892 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-10-05T18:59:23.274Z,1538765963.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T18:59:23.274Z,1538765963.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:59:23.275Z,1538765963.275 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:59:23.275Z,1538765963.275 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T18:59:23.275Z,1538765963.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T18:59:23.276Z,1538765963.276 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T18:59:31.658Z,1538765971.658 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T18:54:29.3Z
2018-10-05T18:59:31.658Z,1538765971.658 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T18:59:31.658Z,1538765971.658 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T18:59:36.615Z,1538765976.615 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0676.lzma
2018-10-05T18:59:37.378Z,1538765977.378 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0676.lzma.bak
2018-10-05T18:59:37.379Z,1538765977.379 [DataOverHttps](INFO): SBD MOMSN=8611937
2018-10-05T18:59:46.654Z,1538765986.654 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0677.lzma
2018-10-05T18:59:47.418Z,1538765987.418 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0677.lzma.bak
2018-10-05T18:59:47.418Z,1538765987.418 [DataOverHttps](INFO): SBD MOMSN=8611939
2018-10-05T18:59:48.408Z,1538765988.408 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T18:59:48.409Z,1538765988.409 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T18:59:48.409Z,1538765988.409 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T19:01:43.999Z,1538766103.999 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T19:01:43.999Z,1538766103.999 [NAL9602] Data Fault, FailCount= 1
2018-10-05T19:01:43.999Z,1538766103.999 [NAL9602](ERROR): Data Fault
2018-10-05T19:01:44.073Z,1538766104.073 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T19:01:44.403Z,1538766104.403 [NAL9602](INFO): Powering down
2018-10-05T19:01:45.288Z,1538766105.288 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T19:01:45.288Z,1538766105.288 [NAL9602] No Fault, FailCount= 1
2018-10-05T19:02:14.471Z,1538766134.471 [NAL9602](INFO): Powering up NAL9602
2018-10-05T19:02:23.334Z,1538766143.334 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:02:23.334Z,1538766143.334 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-10-05T19:02:23.334Z,1538766143.334 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:02:23.346Z,1538766143.346 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:02:23.346Z,1538766143.346 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-10-05T19:02:23.346Z,1538766143.346 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:02:23.367Z,1538766143.367 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:02:23.368Z,1538766143.368 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:02:23.729Z,1538766143.729 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:02:23.729Z,1538766143.729 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-10-05T19:02:23.730Z,1538766143.730 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:02:23.730Z,1538766143.730 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-10-05T19:02:24.127Z,1538766144.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:02:24.128Z,1538766144.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:02:24.128Z,1538766144.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:02:24.128Z,1538766144.128 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:02:24.134Z,1538766144.134 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:02:24.134Z,1538766144.134 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:02:25.271Z,1538766145.271 [NAL9602](INFO): NAL9602 initialized
2018-10-05T19:03:55.505Z,1538766235.505 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T19:03:55.505Z,1538766235.505 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,1853830.1,   0.0,1448.9,  0
2018-10-05T19:04:48.884Z,1538766288.884 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T19:04:48.889Z,1538766288.889 [Default:CheckIn:C.Wait] Stopped
2018-10-05T19:04:48.889Z,1538766288.889 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T19:04:48.889Z,1538766288.889 [Default:CheckIn:D] Running Loop=1
2018-10-05T19:04:49.302Z,1538766289.302 [Default:CheckIn:D] Stopped
2018-10-05T19:04:49.302Z,1538766289.302 [Default:CheckIn:E] Running Loop=1
2018-10-05T19:04:49.702Z,1538766289.702 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2328.358854 min 
2018-10-05T19:04:49.702Z,1538766289.702 [Default:CheckIn:E] Stopped
2018-10-05T19:04:49.703Z,1538766289.703 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T19:04:49.703Z,1538766289.703 [Default:CheckIn] Stopped
2018-10-05T19:04:49.703Z,1538766289.703 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T19:04:49.703Z,1538766289.703 [Default:CheckIn](INFO): Running loop #226
2018-10-05T19:04:49.703Z,1538766289.703 [Default:CheckIn] Running Loop=226
2018-10-05T19:04:49.703Z,1538766289.703 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T19:04:49.703Z,1538766289.703 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T19:05:24.214Z,1538766324.214 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:05:24.214Z,1538766324.214 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-10-05T19:05:24.214Z,1538766324.214 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:05:24.216Z,1538766324.216 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:05:24.216Z,1538766324.216 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-10-05T19:05:24.216Z,1538766324.216 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:05:24.238Z,1538766324.238 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:05:24.238Z,1538766324.238 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:05:24.635Z,1538766324.635 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:05:24.635Z,1538766324.635 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-10-05T19:05:24.635Z,1538766324.635 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:05:24.636Z,1538766324.636 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-10-05T19:05:25.014Z,1538766325.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:05:25.014Z,1538766325.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:05:25.015Z,1538766325.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:05:25.015Z,1538766325.015 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:05:25.016Z,1538766325.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:05:25.016Z,1538766325.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:07:22.883Z,1538766442.883 [RDI_Pathfinder](ERROR): Failed to parse:
,-32768,V
2018-10-05T19:08:25.102Z,1538766505.102 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:08:25.102Z,1538766505.102 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-10-05T19:08:25.103Z,1538766505.103 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:08:25.110Z,1538766505.110 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:08:25.111Z,1538766505.111 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-10-05T19:08:25.111Z,1538766505.111 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:08:25.142Z,1538766505.142 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:08:25.143Z,1538766505.143 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:08:25.532Z,1538766505.532 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:08:25.532Z,1538766505.532 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-10-05T19:08:25.537Z,1538766505.537 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:08:25.537Z,1538766505.537 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-10-05T19:08:25.898Z,1538766505.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:08:25.898Z,1538766505.898 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:08:25.899Z,1538766505.899 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:08:25.899Z,1538766505.899 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:08:25.900Z,1538766505.900 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:08:25.900Z,1538766505.900 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:08:42.759Z,1538766522.759 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,43612.73
2018-10-05T19:09:52.094Z,1538766592.094 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T19:04:49.7Z
2018-10-05T19:09:52.094Z,1538766592.094 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T19:09:52.094Z,1538766592.094 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T19:09:57.032Z,1538766597.032 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0679.lzma
2018-10-05T19:09:57.815Z,1538766597.815 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0679.lzma.bak
2018-10-05T19:09:57.815Z,1538766597.815 [DataOverHttps](INFO): SBD MOMSN=8611941
2018-10-05T19:10:07.039Z,1538766607.039 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0680.lzma
2018-10-05T19:10:07.802Z,1538766607.802 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0680.lzma.bak
2018-10-05T19:10:07.802Z,1538766607.802 [DataOverHttps](INFO): SBD MOMSN=8611943
2018-10-05T19:10:12.300Z,1538766612.300 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T19:10:12.301Z,1538766612.301 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T19:10:12.301Z,1538766612.301 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T19:10:16.514Z,1538766616.514 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe, 15.880, -0.004, 0.000
2018-10-05T19:11:22.877Z,1538766682.877 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe,*15.880,*-0.001,*0.000
2018-10-05T19:11:28.892Z,1538766688.892 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:11:28.892Z,1538766688.892 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-10-05T19:11:28.892Z,1538766688.892 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:11:28.922Z,1538766688.922 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:11:28.923Z,1538766688.923 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-10-05T19:11:28.923Z,1538766688.923 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:11:28.960Z,1538766688.960 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:11:28.960Z,1538766688.960 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:11:29.124Z,1538766689.124 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:11:29.124Z,1538766689.124 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-10-05T19:11:29.137Z,1538766689.137 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:11:29.137Z,1538766689.137 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-10-05T19:11:29.480Z,1538766689.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:11:29.480Z,1538766689.480 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:11:29.481Z,1538766689.481 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:11:29.485Z,1538766689.485 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:11:29.486Z,1538766689.486 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:11:29.486Z,1538766689.486 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:12:27.899Z,1538766747.899 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T19:12:27.899Z,1538766747.899 [NAL9602] Data Fault, FailCount= 2
2018-10-05T19:12:27.899Z,1538766747.899 [NAL9602](ERROR): Data Fault
2018-10-05T19:12:27.981Z,1538766747.981 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T19:12:28.307Z,1538766748.307 [NAL9602](INFO): Powering down
2018-10-05T19:12:29.180Z,1538766749.180 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T19:12:29.180Z,1538766749.180 [NAL9602] No Fault, FailCount= 2
2018-10-05T19:12:58.415Z,1538766778.415 [NAL9602](INFO): Powering up NAL9602
2018-10-05T19:13:12.130Z,1538766792.130 [NAL9602](INFO): NAL9602 initialized
2018-10-05T19:14:29.537Z,1538766869.537 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:14:29.549Z,1538766869.549 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-10-05T19:14:29.549Z,1538766869.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:14:29.551Z,1538766869.551 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:14:29.551Z,1538766869.551 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-10-05T19:14:29.551Z,1538766869.551 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:14:29.564Z,1538766869.564 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:14:29.564Z,1538766869.564 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:14:29.932Z,1538766869.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:14:29.932Z,1538766869.932 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-10-05T19:14:29.932Z,1538766869.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:14:29.932Z,1538766869.932 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-10-05T19:14:30.370Z,1538766870.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:14:30.370Z,1538766870.370 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:14:30.371Z,1538766870.371 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:14:30.371Z,1538766870.371 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:14:30.371Z,1538766870.371 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:14:30.372Z,1538766870.372 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:15:12.808Z,1538766912.808 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T19:15:12.808Z,1538766912.808 [Default:CheckIn:C.Wait] Stopped
2018-10-05T19:15:12.809Z,1538766912.809 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T19:15:12.809Z,1538766912.809 [Default:CheckIn:D] Running Loop=1
2018-10-05T19:15:13.213Z,1538766913.213 [Default:CheckIn:D] Stopped
2018-10-05T19:15:13.214Z,1538766913.214 [Default:CheckIn:E] Running Loop=1
2018-10-05T19:15:13.601Z,1538766913.601 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2338.757552 min 
2018-10-05T19:15:13.601Z,1538766913.601 [Default:CheckIn:E] Stopped
2018-10-05T19:15:13.602Z,1538766913.602 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T19:15:13.602Z,1538766913.602 [Default:CheckIn] Stopped
2018-10-05T19:15:13.602Z,1538766913.602 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T19:15:13.602Z,1538766913.602 [Default:CheckIn](INFO): Running loop #227
2018-10-05T19:15:13.602Z,1538766913.602 [Default:CheckIn] Running Loop=227
2018-10-05T19:15:13.602Z,1538766913.602 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T19:15:13.602Z,1538766913.602 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T19:17:30.404Z,1538767050.404 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:17:30.404Z,1538767050.404 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-10-05T19:17:30.404Z,1538767050.404 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:17:30.406Z,1538767050.406 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:17:30.406Z,1538767050.406 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-10-05T19:17:30.406Z,1538767050.406 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:17:30.420Z,1538767050.420 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:17:30.420Z,1538767050.420 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:17:30.804Z,1538767050.804 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:17:30.804Z,1538767050.804 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-10-05T19:17:30.809Z,1538767050.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:17:30.809Z,1538767050.809 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-10-05T19:17:31.206Z,1538767051.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:17:31.206Z,1538767051.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:17:31.207Z,1538767051.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:17:31.207Z,1538767051.207 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:17:31.208Z,1538767051.208 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:17:31.208Z,1538767051.208 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:19:11.850Z,1538767151.850 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.880,*-0.002,*0.000
2018-10-05T19:20:15.597Z,1538767215.597 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T19:15:13.6Z
2018-10-05T19:20:15.597Z,1538767215.597 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T19:20:15.597Z,1538767215.597 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T19:20:20.540Z,1538767220.540 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0682.lzma
2018-10-05T19:20:21.342Z,1538767221.342 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0682.lzma.bak
2018-10-05T19:20:21.342Z,1538767221.342 [DataOverHttps](INFO): SBD MOMSN=8611945
2018-10-05T19:20:30.642Z,1538767230.642 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0683.lzma
2018-10-05T19:20:31.398Z,1538767231.398 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0683.lzma.bak
2018-10-05T19:20:31.398Z,1538767231.398 [DataOverHttps](INFO): SBD MOMSN=8611947
2018-10-05T19:20:31.474Z,1538767231.474 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:20:31.474Z,1538767231.474 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-10-05T19:20:31.474Z,1538767231.474 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:20:31.476Z,1538767231.476 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:20:31.476Z,1538767231.476 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-10-05T19:20:31.476Z,1538767231.476 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:20:31.498Z,1538767231.498 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:20:31.498Z,1538767231.498 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:20:32.358Z,1538767232.358 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T19:20:32.358Z,1538767232.358 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T19:20:32.358Z,1538767232.358 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T19:20:32.386Z,1538767232.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:20:32.386Z,1538767232.386 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-10-05T19:20:32.386Z,1538767232.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:20:32.386Z,1538767232.386 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-10-05T19:20:32.502Z,1538767232.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:20:32.502Z,1538767232.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:20:32.502Z,1538767232.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:20:32.503Z,1538767232.503 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:20:32.503Z,1538767232.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:20:32.504Z,1538767232.504 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:21:30.649Z,1538767290.649 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T19:23:14.115Z,1538767394.115 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T19:23:14.115Z,1538767394.115 [NAL9602] Data Fault, FailCount= 3
2018-10-05T19:23:14.115Z,1538767394.115 [NAL9602](ERROR): Data Fault
2018-10-05T19:23:14.201Z,1538767394.201 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T19:23:14.511Z,1538767394.511 [NAL9602](INFO): Powering down
2018-10-05T19:23:15.389Z,1538767395.389 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T19:23:15.389Z,1538767395.389 [NAL9602] No Fault, FailCount= 3
2018-10-05T19:23:32.558Z,1538767412.558 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:23:32.558Z,1538767412.558 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-10-05T19:23:32.558Z,1538767412.558 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:23:32.560Z,1538767412.560 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:23:32.560Z,1538767412.560 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-10-05T19:23:32.560Z,1538767412.560 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:23:32.598Z,1538767412.598 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:23:32.598Z,1538767412.598 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:23:32.711Z,1538767412.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:23:32.711Z,1538767412.711 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-10-05T19:23:32.712Z,1538767412.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:23:32.712Z,1538767412.712 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-10-05T19:23:33.074Z,1538767413.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:23:33.074Z,1538767413.074 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:23:33.075Z,1538767413.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:23:33.075Z,1538767413.075 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:23:33.076Z,1538767413.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:23:33.077Z,1538767413.077 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:23:44.615Z,1538767424.615 [NAL9602](INFO): Powering up NAL9602
2018-10-05T19:23:55.815Z,1538767435.815 [NAL9602](INFO): NAL9602 initialized
2018-10-05T19:25:32.604Z,1538767532.604 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T19:25:32.605Z,1538767532.605 [Default:CheckIn:C.Wait] Stopped
2018-10-05T19:25:32.605Z,1538767532.605 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T19:25:32.605Z,1538767532.605 [Default:CheckIn:D] Running Loop=1
2018-10-05T19:25:32.965Z,1538767532.965 [Default:CheckIn:D] Stopped
2018-10-05T19:25:32.965Z,1538767532.965 [Default:CheckIn:E] Running Loop=1
2018-10-05T19:25:33.391Z,1538767533.391 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2349.086719 min 
2018-10-05T19:25:33.392Z,1538767533.392 [Default:CheckIn:E] Stopped
2018-10-05T19:25:33.392Z,1538767533.392 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T19:25:33.392Z,1538767533.392 [Default:CheckIn] Stopped
2018-10-05T19:25:33.392Z,1538767533.392 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T19:25:33.392Z,1538767533.392 [Default:CheckIn](INFO): Running loop #228
2018-10-05T19:25:33.392Z,1538767533.392 [Default:CheckIn] Running Loop=228
2018-10-05T19:25:33.397Z,1538767533.397 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T19:25:33.398Z,1538767533.398 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T19:26:33.356Z,1538767593.356 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:26:33.356Z,1538767593.356 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-10-05T19:26:33.356Z,1538767593.356 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:26:33.358Z,1538767593.358 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:26:33.358Z,1538767593.358 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-10-05T19:26:33.358Z,1538767593.358 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:26:33.388Z,1538767593.388 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:26:33.388Z,1538767593.388 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:26:33.766Z,1538767593.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:26:33.766Z,1538767593.766 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-10-05T19:26:33.767Z,1538767593.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:26:33.767Z,1538767593.767 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-10-05T19:26:34.170Z,1538767594.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:26:34.171Z,1538767594.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:26:34.171Z,1538767594.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:26:34.172Z,1538767594.172 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:26:34.172Z,1538767594.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:26:34.172Z,1538767594.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:27:30.656Z,1538767650.656 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.894,*0.003,*65.535
2018-10-05T19:29:34.266Z,1538767774.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:29:34.266Z,1538767774.266 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-10-05T19:29:34.266Z,1538767774.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:29:34.268Z,1538767774.268 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:29:34.268Z,1538767774.268 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-10-05T19:29:34.268Z,1538767774.268 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:29:34.290Z,1538767774.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:29:34.290Z,1538767774.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:29:34.667Z,1538767774.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:29:34.667Z,1538767774.667 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-10-05T19:29:34.667Z,1538767774.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:29:34.667Z,1538767774.667 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-10-05T19:29:35.073Z,1538767775.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:29:35.074Z,1538767775.074 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:29:35.075Z,1538767775.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:29:35.076Z,1538767775.076 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:29:35.078Z,1538767775.078 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:29:35.079Z,1538767775.079 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:30:35.984Z,1538767835.984 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T19:25:33.4Z
2018-10-05T19:30:35.984Z,1538767835.984 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T19:30:35.984Z,1538767835.984 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T19:30:40.944Z,1538767840.944 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0685.lzma
2018-10-05T19:30:41.726Z,1538767841.726 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0685.lzma.bak
2018-10-05T19:30:41.726Z,1538767841.726 [DataOverHttps](INFO): SBD MOMSN=8611949
2018-10-05T19:30:50.965Z,1538767850.965 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0686.lzma
2018-10-05T19:30:51.714Z,1538767851.714 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0686.lzma.bak
2018-10-05T19:30:51.714Z,1538767851.714 [DataOverHttps](INFO): SBD MOMSN=8611951
2018-10-05T19:30:52.691Z,1538767852.691 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T19:30:52.691Z,1538767852.691 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T19:30:52.691Z,1538767852.691 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T19:32:35.215Z,1538767955.215 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:32:35.215Z,1538767955.215 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-10-05T19:32:35.215Z,1538767955.215 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:32:35.221Z,1538767955.221 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:32:35.222Z,1538767955.222 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-10-05T19:32:35.222Z,1538767955.222 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:32:35.243Z,1538767955.243 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:32:35.243Z,1538767955.243 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:32:35.634Z,1538767955.634 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:32:35.634Z,1538767955.634 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-10-05T19:32:35.635Z,1538767955.635 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:32:35.635Z,1538767955.635 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-10-05T19:32:36.006Z,1538767956.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:32:36.006Z,1538767956.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:32:36.007Z,1538767956.007 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:32:36.007Z,1538767956.007 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:32:36.008Z,1538767956.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:32:36.008Z,1538767956.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:32:46.467Z,1538767966.467 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe, 15.894, -0.002, 0.000
2018-10-05T19:33:58.635Z,1538768038.635 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T19:33:58.635Z,1538768038.635 [NAL9602] Data Fault, FailCount= 4
2018-10-05T19:33:58.635Z,1538768038.635 [NAL9602](ERROR): Data Fault
2018-10-05T19:33:58.701Z,1538768038.701 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T19:33:59.039Z,1538768039.039 [NAL9602](INFO): Powering down
2018-10-05T19:33:59.901Z,1538768039.901 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T19:33:59.902Z,1538768039.902 [NAL9602] No Fault, FailCount= 4
2018-10-05T19:34:29.130Z,1538768069.130 [NAL9602](INFO): Powering up NAL9602
2018-10-05T19:34:40.303Z,1538768080.303 [NAL9602](INFO): NAL9602 initialized
2018-10-05T19:35:38.600Z,1538768138.600 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:35:38.600Z,1538768138.600 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-10-05T19:35:38.600Z,1538768138.600 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:35:38.602Z,1538768138.602 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:35:38.602Z,1538768138.602 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-10-05T19:35:38.602Z,1538768138.602 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:35:38.615Z,1538768138.615 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:35:38.616Z,1538768138.616 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:35:38.787Z,1538768138.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:35:38.787Z,1538768138.787 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-10-05T19:35:38.788Z,1538768138.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:35:38.788Z,1538768138.788 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-10-05T19:35:39.127Z,1538768139.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:35:39.128Z,1538768139.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:35:39.128Z,1538768139.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:35:39.145Z,1538768139.145 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:35:39.146Z,1538768139.146 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:35:39.147Z,1538768139.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:35:53.102Z,1538768153.102 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T19:35:53.103Z,1538768153.103 [Default:CheckIn:C.Wait] Stopped
2018-10-05T19:35:53.103Z,1538768153.103 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T19:35:53.103Z,1538768153.103 [Default:CheckIn:D] Running Loop=1
2018-10-05T19:35:53.500Z,1538768153.500 [Default:CheckIn:D] Stopped
2018-10-05T19:35:53.500Z,1538768153.500 [Default:CheckIn:E] Running Loop=1
2018-10-05T19:35:53.893Z,1538768153.893 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2359.428906 min 
2018-10-05T19:35:53.893Z,1538768153.893 [Default:CheckIn:E] Stopped
2018-10-05T19:35:53.893Z,1538768153.893 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T19:35:53.893Z,1538768153.893 [Default:CheckIn] Stopped
2018-10-05T19:35:53.893Z,1538768153.893 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T19:35:53.894Z,1538768153.894 [Default:CheckIn](INFO): Running loop #229
2018-10-05T19:35:53.894Z,1538768153.894 [Default:CheckIn] Running Loop=229
2018-10-05T19:35:53.894Z,1538768153.894 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T19:35:53.894Z,1538768153.894 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T19:38:39.381Z,1538768319.381 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:38:39.381Z,1538768319.381 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-10-05T19:38:39.381Z,1538768319.381 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:38:39.383Z,1538768319.383 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:38:39.384Z,1538768319.384 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-10-05T19:38:39.384Z,1538768319.384 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:38:39.397Z,1538768319.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:38:39.397Z,1538768319.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:38:39.806Z,1538768319.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:38:39.806Z,1538768319.806 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-10-05T19:38:39.806Z,1538768319.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:38:39.806Z,1538768319.806 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-10-05T19:38:40.174Z,1538768320.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:38:40.174Z,1538768320.174 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:38:40.175Z,1538768320.175 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:38:40.175Z,1538768320.175 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:38:40.176Z,1538768320.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:38:40.176Z,1538768320.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:40:56.218Z,1538768456.218 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T19:35:53.9Z
2018-10-05T19:40:56.218Z,1538768456.218 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T19:40:56.219Z,1538768456.219 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T19:41:01.166Z,1538768461.166 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0688.lzma
2018-10-05T19:41:01.942Z,1538768461.942 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0688.lzma.bak
2018-10-05T19:41:01.942Z,1538768461.942 [DataOverHttps](INFO): SBD MOMSN=8611953
2018-10-05T19:41:06.439Z,1538768466.439 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T19:41:11.892Z,1538768471.892 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0689.lzma
2018-10-05T19:41:12.680Z,1538768472.680 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0689.lzma.bak
2018-10-05T19:41:12.680Z,1538768472.680 [DataOverHttps](INFO): SBD MOMSN=8611955
2018-10-05T19:41:13.655Z,1538768473.655 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T19:41:13.655Z,1538768473.655 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T19:41:13.655Z,1538768473.655 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T19:41:40.247Z,1538768500.247 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:41:40.248Z,1538768500.248 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-10-05T19:41:40.248Z,1538768500.248 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:41:40.254Z,1538768500.254 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:41:40.254Z,1538768500.254 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-10-05T19:41:40.255Z,1538768500.255 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:41:40.292Z,1538768500.292 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:41:40.292Z,1538768500.292 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:41:40.663Z,1538768500.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:41:40.663Z,1538768500.663 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-10-05T19:41:40.663Z,1538768500.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:41:40.663Z,1538768500.663 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-10-05T19:41:41.014Z,1538768501.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:41:41.014Z,1538768501.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:41:41.015Z,1538768501.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:41:41.015Z,1538768501.015 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:41:41.015Z,1538768501.015 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:41:41.016Z,1538768501.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:42:12.816Z,1538768532.816 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.887,*-0.008,*0.000
2018-10-05T19:44:41.227Z,1538768681.227 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:44:41.227Z,1538768681.227 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-10-05T19:44:41.227Z,1538768681.227 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:44:41.229Z,1538768681.229 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:44:41.229Z,1538768681.229 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-10-05T19:44:41.229Z,1538768681.229 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:44:41.260Z,1538768681.260 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:44:41.260Z,1538768681.260 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:44:41.634Z,1538768681.634 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:44:41.634Z,1538768681.634 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-10-05T19:44:41.634Z,1538768681.634 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:44:41.634Z,1538768681.634 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-10-05T19:44:41.979Z,1538768681.979 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T19:44:41.979Z,1538768681.979 [NAL9602] Data Fault, FailCount= 5
2018-10-05T19:44:41.979Z,1538768681.979 [NAL9602](ERROR): Data Fault
2018-10-05T19:44:42.026Z,1538768682.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:44:42.026Z,1538768682.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:44:42.027Z,1538768682.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:44:42.027Z,1538768682.027 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:44:42.028Z,1538768682.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:44:42.028Z,1538768682.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:44:42.057Z,1538768682.057 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T19:44:42.058Z,1538768682.058 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T19:44:42.383Z,1538768682.383 [NAL9602](INFO): Powering down
2018-10-05T19:44:42.436Z,1538768682.436 [CBIT](INFO): Critical error at 20181005T194442
2018-10-05T19:46:13.474Z,1538768773.474 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T19:46:13.474Z,1538768773.474 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.   +0.00,        +0.00,   0.00,45855.94
2018-10-05T19:46:13.875Z,1538768773.875 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T19:46:13.875Z,1538768773.875 [Default:CheckIn:C.Wait] Stopped
2018-10-05T19:46:13.876Z,1538768773.876 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T19:46:13.876Z,1538768773.876 [Default:CheckIn:D] Running Loop=1
2018-10-05T19:46:14.308Z,1538768774.308 [Default:CheckIn:D] Stopped
2018-10-05T19:46:14.308Z,1538768774.308 [Default:CheckIn:E] Running Loop=1
2018-10-05T19:46:14.689Z,1538768774.689 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2369.775781 min 
2018-10-05T19:46:14.689Z,1538768774.689 [Default:CheckIn:E] Stopped
2018-10-05T19:46:14.689Z,1538768774.689 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T19:46:14.689Z,1538768774.689 [Default:CheckIn] Stopped
2018-10-05T19:46:14.689Z,1538768774.689 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T19:46:14.690Z,1538768774.690 [Default:CheckIn](INFO): Running loop #230
2018-10-05T19:46:14.690Z,1538768774.690 [Default:CheckIn] Running Loop=230
2018-10-05T19:46:14.690Z,1538768774.690 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T19:46:14.690Z,1538768774.690 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T19:46:42.200Z,1538768802.200 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T19:46:42.200Z,1538768802.200 [NAL9602] No Fault, FailCount= 5
2018-10-05T19:46:42.539Z,1538768802.539 [NAL9602](INFO): Powering up NAL9602
2018-10-05T19:46:53.739Z,1538768813.739 [NAL9602](INFO): NAL9602 initialized
2018-10-05T19:47:42.251Z,1538768862.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:47:42.251Z,1538768862.251 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-10-05T19:47:42.251Z,1538768862.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:47:42.253Z,1538768862.253 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:47:42.253Z,1538768862.253 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-10-05T19:47:42.253Z,1538768862.253 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:47:42.266Z,1538768862.266 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:47:42.267Z,1538768862.267 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:47:45.472Z,1538768865.472 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:47:45.472Z,1538768865.472 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-10-05T19:47:45.472Z,1538768865.472 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:47:45.472Z,1538768865.472 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-10-05T19:47:45.582Z,1538768865.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:47:45.583Z,1538768865.583 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:47:45.583Z,1538768865.583 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:47:45.584Z,1538768865.584 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:47:45.584Z,1538768865.584 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:47:45.584Z,1538768865.584 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:50:45.595Z,1538769045.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:50:45.595Z,1538769045.595 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-10-05T19:50:45.595Z,1538769045.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:50:45.601Z,1538769045.601 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:50:45.602Z,1538769045.602 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-10-05T19:50:45.602Z,1538769045.602 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:50:45.623Z,1538769045.623 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:50:45.623Z,1538769045.623 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:50:46.026Z,1538769046.026 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:50:46.026Z,1538769046.026 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-10-05T19:50:46.027Z,1538769046.027 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:50:46.027Z,1538769046.027 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-10-05T19:50:46.405Z,1538769046.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:50:46.406Z,1538769046.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:50:46.406Z,1538769046.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:50:46.407Z,1538769046.407 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:50:46.407Z,1538769046.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:50:46.407Z,1538769046.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:51:20.550Z,1538769080.550 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T19:46:14.7Z
2018-10-05T19:51:20.551Z,1538769080.551 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T19:51:20.551Z,1538769080.551 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T19:51:26.435Z,1538769086.435 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20181004T041305/Courier0691.lzma
2018-10-05T19:51:27.186Z,1538769087.186 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0691.lzma.bak
2018-10-05T19:51:27.187Z,1538769087.187 [DataOverHttps](INFO): SBD MOMSN=8611957
2018-10-05T19:51:37.544Z,1538769097.544 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0692.lzma
2018-10-05T19:51:39.043Z,1538769099.043 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0692.lzma.bak
2018-10-05T19:51:39.044Z,1538769099.044 [DataOverHttps](INFO): SBD MOMSN=8611959
2018-10-05T19:51:39.995Z,1538769099.995 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T19:51:39.995Z,1538769099.995 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T19:51:39.995Z,1538769099.995 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T19:51:43.257Z,1538769103.257 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe, 15.887, -0.010, 0.000
2018-10-05T19:53:46.451Z,1538769226.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:53:46.451Z,1538769226.451 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-10-05T19:53:46.451Z,1538769226.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:53:46.457Z,1538769226.457 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:53:46.457Z,1538769226.457 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-10-05T19:53:46.457Z,1538769226.457 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:53:46.486Z,1538769226.486 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:53:46.487Z,1538769226.487 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:53:46.849Z,1538769226.849 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:53:46.849Z,1538769226.849 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-10-05T19:53:46.850Z,1538769226.850 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:53:46.850Z,1538769226.850 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-10-05T19:53:47.247Z,1538769227.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:53:47.248Z,1538769227.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:53:47.248Z,1538769227.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:53:47.248Z,1538769227.248 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:53:47.253Z,1538769227.253 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:53:47.253Z,1538769227.253 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:55:06.192Z,1538769306.192 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-05T19:55:10.619Z,1538769310.619 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T19:55:10.620Z,1538769310.620 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-3768,V
2018-10-05T19:56:40.392Z,1538769400.392 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T19:56:40.393Z,1538769400.393 [Default:CheckIn:C.Wait] Stopped
2018-10-05T19:56:40.393Z,1538769400.393 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T19:56:40.393Z,1538769400.393 [Default:CheckIn:D] Running Loop=1
2018-10-05T19:56:40.797Z,1538769400.797 [Default:CheckIn:D] Stopped
2018-10-05T19:56:40.797Z,1538769400.797 [Default:CheckIn:E] Running Loop=1
2018-10-05T19:56:41.185Z,1538769401.185 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2380.217187 min 
2018-10-05T19:56:41.185Z,1538769401.185 [Default:CheckIn:E] Stopped
2018-10-05T19:56:41.186Z,1538769401.186 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T19:56:41.186Z,1538769401.186 [Default:CheckIn] Stopped
2018-10-05T19:56:41.186Z,1538769401.186 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T19:56:41.186Z,1538769401.186 [Default:CheckIn](INFO): Running loop #231
2018-10-05T19:56:41.186Z,1538769401.186 [Default:CheckIn] Running Loop=231
2018-10-05T19:56:41.186Z,1538769401.186 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T19:56:41.186Z,1538769401.186 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T19:56:47.587Z,1538769407.587 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:56:47.587Z,1538769407.587 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-10-05T19:56:47.587Z,1538769407.587 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:56:47.593Z,1538769407.593 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:56:47.593Z,1538769407.593 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-10-05T19:56:47.593Z,1538769407.593 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:56:47.619Z,1538769407.619 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:56:47.619Z,1538769407.619 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:56:48.027Z,1538769408.027 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:56:48.028Z,1538769408.028 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-10-05T19:56:48.028Z,1538769408.028 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:56:48.028Z,1538769408.028 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-10-05T19:56:48.398Z,1538769408.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:56:48.399Z,1538769408.399 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:56:48.399Z,1538769408.399 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:56:48.400Z,1538769408.400 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:56:48.400Z,1538769408.400 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:56:48.400Z,1538769408.400 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:56:56.739Z,1538769416.739 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T19:56:56.739Z,1538769416.739 [NAL9602] Data Fault, FailCount= 1
2018-10-05T19:56:56.739Z,1538769416.739 [NAL9602](ERROR): Data Fault
2018-10-05T19:56:56.822Z,1538769416.822 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T19:56:57.143Z,1538769417.143 [NAL9602](INFO): Powering down
2018-10-05T19:56:58.005Z,1538769418.005 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T19:56:58.005Z,1538769418.005 [NAL9602] No Fault, FailCount= 1
2018-10-05T19:57:27.243Z,1538769447.243 [NAL9602](INFO): Powering up NAL9602
2018-10-05T19:57:38.119Z,1538769458.119 [NAL9602](INFO): NAL9602 initialized
2018-10-05T19:58:48.338Z,1538769528.338 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-05T19:59:48.453Z,1538769588.453 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:59:48.453Z,1538769588.453 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-10-05T19:59:48.453Z,1538769588.453 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T19:59:48.455Z,1538769588.455 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T19:59:48.455Z,1538769588.455 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-10-05T19:59:48.455Z,1538769588.455 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T19:59:48.481Z,1538769588.481 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T19:59:48.482Z,1538769588.482 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T19:59:48.858Z,1538769588.858 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T19:59:48.858Z,1538769588.858 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-10-05T19:59:48.859Z,1538769588.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T19:59:48.859Z,1538769588.859 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-10-05T19:59:49.247Z,1538769589.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T19:59:49.247Z,1538769589.247 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:59:49.248Z,1538769589.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T19:59:49.248Z,1538769589.248 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T19:59:49.248Z,1538769589.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T19:59:49.249Z,1538769589.249 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:01:00.613Z,1538769660.613 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.833,*-0.009,*0.000
2018-10-05T20:01:43.506Z,1538769703.506 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T19:56:41.2Z
2018-10-05T20:01:43.507Z,1538769703.507 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T20:01:43.507Z,1538769703.507 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T20:01:48.650Z,1538769708.650 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0694.lzma
2018-10-05T20:01:49.425Z,1538769709.425 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0694.lzma.bak
2018-10-05T20:01:49.425Z,1538769709.425 [DataOverHttps](INFO): SBD MOMSN=8611961
2018-10-05T20:01:58.782Z,1538769718.782 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0695.lzma
2018-10-05T20:01:59.554Z,1538769719.554 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0695.lzma.bak
2018-10-05T20:01:59.554Z,1538769719.554 [DataOverHttps](INFO): SBD MOMSN=8611963
2018-10-05T20:02:00.549Z,1538769720.549 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T20:02:00.549Z,1538769720.549 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T20:02:00.550Z,1538769720.550 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T20:02:49.615Z,1538769769.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:02:49.615Z,1538769769.615 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-10-05T20:02:49.615Z,1538769769.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:02:49.617Z,1538769769.617 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:02:49.618Z,1538769769.618 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-10-05T20:02:49.618Z,1538769769.618 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:02:49.631Z,1538769769.631 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:02:49.631Z,1538769769.631 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:02:50.035Z,1538769770.035 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:02:50.035Z,1538769770.035 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-10-05T20:02:50.036Z,1538769770.036 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:02:50.036Z,1538769770.036 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-10-05T20:02:50.422Z,1538769770.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:02:50.422Z,1538769770.422 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:02:50.423Z,1538769770.423 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:02:50.423Z,1538769770.423 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:02:50.423Z,1538769770.423 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:02:50.424Z,1538769770.424 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:05:37.329Z,1538769937.329 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T20:05:50.560Z,1538769950.560 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:05:50.560Z,1538769950.560 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-10-05T20:05:50.560Z,1538769950.560 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:05:50.566Z,1538769950.566 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:05:50.567Z,1538769950.567 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-10-05T20:05:50.567Z,1538769950.567 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:05:50.588Z,1538769950.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:05:50.589Z,1538769950.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:05:50.960Z,1538769950.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:05:50.960Z,1538769950.960 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-10-05T20:05:50.960Z,1538769950.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:05:50.960Z,1538769950.960 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-10-05T20:05:51.339Z,1538769951.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:05:51.340Z,1538769951.340 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:05:51.345Z,1538769951.345 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:05:51.345Z,1538769951.345 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:05:51.346Z,1538769951.346 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:05:51.346Z,1538769951.346 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:07:00.960Z,1538770020.960 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T20:07:00.965Z,1538770020.965 [Default:CheckIn:C.Wait] Stopped
2018-10-05T20:07:00.965Z,1538770020.965 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T20:07:00.965Z,1538770020.965 [Default:CheckIn:D] Running Loop=1
2018-10-05T20:07:01.386Z,1538770021.386 [Default:CheckIn:D] Stopped
2018-10-05T20:07:01.386Z,1538770021.386 [Default:CheckIn:E] Running Loop=1
2018-10-05T20:07:01.771Z,1538770021.771 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2390.560417 min 
2018-10-05T20:07:01.771Z,1538770021.771 [Default:CheckIn:E] Stopped
2018-10-05T20:07:01.771Z,1538770021.771 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T20:07:01.771Z,1538770021.771 [Default:CheckIn] Stopped
2018-10-05T20:07:01.771Z,1538770021.771 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T20:07:01.772Z,1538770021.772 [Default:CheckIn](INFO): Running loop #232
2018-10-05T20:07:01.772Z,1538770021.772 [Default:CheckIn] Running Loop=232
2018-10-05T20:07:01.772Z,1538770021.772 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T20:07:01.772Z,1538770021.772 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T20:07:38.999Z,1538770058.999 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T20:07:38.999Z,1538770058.999 [NAL9602] Data Fault, FailCount= 2
2018-10-05T20:07:38.999Z,1538770058.999 [NAL9602](ERROR): Data Fault
2018-10-05T20:07:39.072Z,1538770059.072 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T20:07:39.399Z,1538770059.399 [NAL9602](INFO): Powering down
2018-10-05T20:07:40.290Z,1538770060.290 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T20:07:40.290Z,1538770060.290 [NAL9602] No Fault, FailCount= 2
2018-10-05T20:07:58.303Z,1538770078.303 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T20:08:09.483Z,1538770089.483 [NAL9602](INFO): Powering up NAL9602
2018-10-05T20:08:20.667Z,1538770100.667 [NAL9602](INFO): NAL9602 initialized
2018-10-05T20:08:51.571Z,1538770131.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:08:51.571Z,1538770131.571 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-10-05T20:08:51.571Z,1538770131.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:08:51.573Z,1538770131.573 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:08:51.573Z,1538770131.573 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-10-05T20:08:51.573Z,1538770131.573 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:08:51.598Z,1538770131.598 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:08:51.599Z,1538770131.599 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:08:51.998Z,1538770131.998 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:08:51.998Z,1538770131.998 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-10-05T20:08:51.998Z,1538770131.998 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:08:51.998Z,1538770131.998 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-10-05T20:08:52.350Z,1538770132.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:08:52.351Z,1538770132.351 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:08:52.352Z,1538770132.352 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:08:52.352Z,1538770132.352 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:08:52.369Z,1538770132.369 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:08:52.370Z,1538770132.370 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:11:52.555Z,1538770312.555 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:11:52.555Z,1538770312.555 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-10-05T20:11:52.555Z,1538770312.555 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:11:52.557Z,1538770312.557 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:11:52.557Z,1538770312.557 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-10-05T20:11:52.557Z,1538770312.557 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:11:52.570Z,1538770312.570 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:11:52.571Z,1538770312.571 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:11:52.954Z,1538770312.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:11:52.954Z,1538770312.954 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-10-05T20:11:52.955Z,1538770312.955 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:11:52.955Z,1538770312.955 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-10-05T20:11:53.364Z,1538770313.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:11:53.364Z,1538770313.364 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:11:53.369Z,1538770313.369 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:11:53.369Z,1538770313.369 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:11:53.370Z,1538770313.370 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:11:53.370Z,1538770313.370 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:12:04.185Z,1538770324.185 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T20:07:01.8Z
2018-10-05T20:12:04.186Z,1538770324.186 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T20:12:04.186Z,1538770324.186 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T20:12:09.146Z,1538770329.146 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0697.lzma
2018-10-05T20:12:09.923Z,1538770329.923 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0697.lzma.bak
2018-10-05T20:12:09.923Z,1538770329.923 [DataOverHttps](INFO): SBD MOMSN=8611965
2018-10-05T20:12:23.234Z,1538770343.234 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0698.lzma
2018-10-05T20:12:24.128Z,1538770344.128 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0698.lzma.bak
2018-10-05T20:12:24.128Z,1538770344.128 [DataOverHttps](INFO): SBD MOMSN=8611967
2018-10-05T20:12:25.144Z,1538770345.144 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T20:12:25.144Z,1538770345.144 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T20:12:25.144Z,1538770345.144 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T20:14:53.444Z,1538770493.444 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:14:53.444Z,1538770493.444 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-10-05T20:14:53.444Z,1538770493.444 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:14:53.446Z,1538770493.446 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:14:53.446Z,1538770493.446 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-10-05T20:14:53.446Z,1538770493.446 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:14:53.460Z,1538770493.460 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:14:53.460Z,1538770493.460 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:14:53.858Z,1538770493.858 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:14:53.858Z,1538770493.858 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-10-05T20:14:53.859Z,1538770493.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:14:53.859Z,1538770493.859 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-10-05T20:14:54.245Z,1538770494.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:14:54.246Z,1538770494.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:14:54.246Z,1538770494.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:14:54.247Z,1538770494.247 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:14:54.247Z,1538770494.247 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:14:54.247Z,1538770494.247 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:17:23.043Z,1538770643.043 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T20:17:23.043Z,1538770643.043 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100513222183,35.0, -0.1,448.9,  0
2018-10-05T20:17:25.420Z,1538770645.420 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T20:17:25.421Z,1538770645.421 [Default:CheckIn:C.Wait] Stopped
2018-10-05T20:17:25.421Z,1538770645.421 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T20:17:25.421Z,1538770645.421 [Default:CheckIn:D] Running Loop=1
2018-10-05T20:17:25.824Z,1538770645.824 [Default:CheckIn:D] Stopped
2018-10-05T20:17:25.824Z,1538770645.824 [Default:CheckIn:E] Running Loop=1
2018-10-05T20:17:26.238Z,1538770646.238 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2400.967708 min 
2018-10-05T20:17:26.238Z,1538770646.238 [Default:CheckIn:E] Stopped
2018-10-05T20:17:26.238Z,1538770646.238 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T20:17:26.239Z,1538770646.239 [Default:CheckIn] Stopped
2018-10-05T20:17:26.239Z,1538770646.239 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T20:17:26.239Z,1538770646.239 [Default:CheckIn](INFO): Running loop #233
2018-10-05T20:17:26.239Z,1538770646.239 [Default:CheckIn] Running Loop=233
2018-10-05T20:17:26.239Z,1538770646.239 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T20:17:26.239Z,1538770646.239 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T20:17:54.399Z,1538770674.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:17:54.399Z,1538770674.399 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-10-05T20:17:54.399Z,1538770674.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:17:54.401Z,1538770674.401 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:17:54.401Z,1538770674.401 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-10-05T20:17:54.401Z,1538770674.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:17:54.425Z,1538770674.425 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:17:54.426Z,1538770674.426 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:17:54.801Z,1538770674.801 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:17:54.802Z,1538770674.802 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-10-05T20:17:54.802Z,1538770674.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:17:54.802Z,1538770674.802 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-10-05T20:17:55.170Z,1538770675.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:17:55.170Z,1538770675.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:17:55.171Z,1538770675.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:17:55.171Z,1538770675.171 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:17:55.171Z,1538770675.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:17:55.172Z,1538770675.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:18:22.843Z,1538770702.843 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T20:18:22.843Z,1538770702.843 [NAL9602] Data Fault, FailCount= 3
2018-10-05T20:18:22.843Z,1538770702.843 [NAL9602](ERROR): Data Fault
2018-10-05T20:18:22.903Z,1538770702.903 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T20:18:23.243Z,1538770703.243 [NAL9602](INFO): Powering down
2018-10-05T20:18:23.267Z,1538770703.267 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T20:18:24.126Z,1538770704.126 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T20:18:24.126Z,1538770704.126 [NAL9602] No Fault, FailCount= 3
2018-10-05T20:18:53.250Z,1538770733.250 [NAL9602](INFO): Powering up NAL9602
2018-10-05T20:19:04.135Z,1538770744.135 [NAL9602](INFO): NAL9602 initialized
2018-10-05T20:20:03.054Z,1538770803.054 [RDI_Pathfinder](ERROR): only read 1 of 1 data item for altitude
2018-10-05T20:20:03.054Z,1538770803.054 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G0ffd, 15.894, -0.002, 0.000
2018-10-05T20:20:55.240Z,1538770855.240 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:20:55.240Z,1538770855.240 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-10-05T20:20:55.240Z,1538770855.240 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:20:55.242Z,1538770855.242 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:20:55.242Z,1538770855.242 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-10-05T20:20:55.242Z,1538770855.242 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:20:55.259Z,1538770855.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:20:55.259Z,1538770855.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:20:55.643Z,1538770855.643 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:20:55.643Z,1538770855.643 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-10-05T20:20:55.644Z,1538770855.644 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:20:55.644Z,1538770855.644 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-10-05T20:20:56.038Z,1538770856.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:20:56.039Z,1538770856.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:20:56.039Z,1538770856.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:20:56.039Z,1538770856.039 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:20:56.045Z,1538770856.045 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:20:56.046Z,1538770856.046 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:22:28.799Z,1538770948.799 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T20:17:26.2Z
2018-10-05T20:22:28.799Z,1538770948.799 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T20:22:28.799Z,1538770948.799 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T20:22:33.903Z,1538770953.903 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0700.lzma
2018-10-05T20:22:34.679Z,1538770954.679 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0700.lzma.bak
2018-10-05T20:22:34.679Z,1538770954.679 [DataOverHttps](INFO): SBD MOMSN=8611969
2018-10-05T20:22:43.925Z,1538770963.925 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0701.lzma
2018-10-05T20:22:44.702Z,1538770964.702 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0701.lzma.bak
2018-10-05T20:22:44.702Z,1538770964.702 [DataOverHttps](INFO): SBD MOMSN=8611971
2018-10-05T20:22:45.683Z,1538770965.683 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T20:22:45.683Z,1538770965.683 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T20:22:45.683Z,1538770965.683 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T20:23:56.315Z,1538771036.315 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:23:56.315Z,1538771036.315 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-10-05T20:23:56.315Z,1538771036.315 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:23:56.321Z,1538771036.321 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:23:56.321Z,1538771036.321 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-10-05T20:23:56.321Z,1538771036.321 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:23:56.339Z,1538771036.339 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:23:56.340Z,1538771036.340 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:23:56.716Z,1538771036.716 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:23:56.716Z,1538771036.716 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-10-05T20:23:56.721Z,1538771036.721 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:23:56.721Z,1538771036.721 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-10-05T20:23:59.885Z,1538771039.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:23:59.885Z,1538771039.885 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:23:59.886Z,1538771039.886 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:23:59.886Z,1538771039.886 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:23:59.887Z,1538771039.887 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:23:59.887Z,1538771039.887 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:26:51.750Z,1538771211.750 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-05T20:26:51.750Z,1538771211.750 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,
2018-10-05T20:27:00.268Z,1538771220.268 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:27:00.268Z,1538771220.268 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-10-05T20:27:00.268Z,1538771220.268 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:27:00.274Z,1538771220.274 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:27:00.274Z,1538771220.274 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-10-05T20:27:00.275Z,1538771220.275 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:27:00.297Z,1538771220.297 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:27:00.301Z,1538771220.301 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:27:00.666Z,1538771220.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:27:00.666Z,1538771220.666 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-10-05T20:27:00.667Z,1538771220.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:27:00.667Z,1538771220.667 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-10-05T20:27:01.050Z,1538771221.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:27:01.050Z,1538771221.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:27:01.050Z,1538771221.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:27:01.051Z,1538771221.051 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:27:01.051Z,1538771221.051 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:27:01.052Z,1538771221.052 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:27:45.984Z,1538771265.984 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T20:27:45.984Z,1538771265.984 [Default:CheckIn:C.Wait] Stopped
2018-10-05T20:27:45.984Z,1538771265.984 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T20:27:45.989Z,1538771265.989 [Default:CheckIn:D] Running Loop=1
2018-10-05T20:27:46.352Z,1538771266.352 [Default:CheckIn:D] Stopped
2018-10-05T20:27:46.352Z,1538771266.352 [Default:CheckIn:E] Running Loop=1
2018-10-05T20:27:46.747Z,1538771266.747 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2411.309635 min 
2018-10-05T20:27:46.748Z,1538771266.748 [Default:CheckIn:E] Stopped
2018-10-05T20:27:46.748Z,1538771266.748 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T20:27:46.748Z,1538771266.748 [Default:CheckIn] Stopped
2018-10-05T20:27:46.748Z,1538771266.748 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T20:27:46.748Z,1538771266.748 [Default:CheckIn](INFO): Running loop #234
2018-10-05T20:27:46.748Z,1538771266.748 [Default:CheckIn] Running Loop=234
2018-10-05T20:27:46.748Z,1538771266.748 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T20:27:46.749Z,1538771266.749 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T20:29:06.471Z,1538771346.471 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T20:29:06.471Z,1538771346.471 [NAL9602] Data Fault, FailCount= 4
2018-10-05T20:29:06.471Z,1538771346.471 [NAL9602](ERROR): Data Fault
2018-10-05T20:29:06.535Z,1538771346.535 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T20:29:06.867Z,1538771346.867 [NAL9602](INFO): Powering down
2018-10-05T20:29:07.749Z,1538771347.749 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T20:29:07.749Z,1538771347.749 [NAL9602] No Fault, FailCount= 4
2018-10-05T20:29:36.959Z,1538771376.959 [NAL9602](INFO): Powering up NAL9602
2018-10-05T20:29:48.163Z,1538771388.163 [NAL9602](INFO): NAL9602 initialized
2018-10-05T20:29:54.300Z,1538771394.300 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T20:30:01.111Z,1538771401.111 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:30:01.111Z,1538771401.111 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-10-05T20:30:01.111Z,1538771401.111 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:30:01.113Z,1538771401.113 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:30:01.113Z,1538771401.113 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-10-05T20:30:01.113Z,1538771401.113 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:30:01.126Z,1538771401.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:30:01.127Z,1538771401.127 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:30:01.549Z,1538771401.549 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:30:01.549Z,1538771401.549 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-10-05T20:30:01.550Z,1538771401.550 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:30:01.550Z,1538771401.550 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-10-05T20:30:01.922Z,1538771401.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:30:01.922Z,1538771401.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:30:01.922Z,1538771401.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:30:01.923Z,1538771401.923 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:30:01.923Z,1538771401.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:30:01.924Z,1538771401.924 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:32:05.404Z,1538771525.404 [RDI_Pathfinder](ERROR): Failed to parse:     +0.00,        +0.00,        +0.00,   0.00,48597.19
2018-10-05T20:32:49.576Z,1538771569.576 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T20:27:46.7Z
2018-10-05T20:32:49.576Z,1538771569.576 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T20:32:49.576Z,1538771569.576 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T20:32:54.648Z,1538771574.648 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0703.lzma
2018-10-05T20:32:55.422Z,1538771575.422 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0703.lzma.bak
2018-10-05T20:32:55.422Z,1538771575.422 [DataOverHttps](INFO): SBD MOMSN=8611973
2018-10-05T20:33:04.674Z,1538771584.674 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:33:04.674Z,1538771584.674 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-10-05T20:33:04.674Z,1538771584.674 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:33:04.676Z,1538771584.676 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:33:04.676Z,1538771584.676 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-10-05T20:33:04.676Z,1538771584.676 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:33:04.690Z,1538771584.690 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:33:04.690Z,1538771584.690 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:33:04.742Z,1538771584.742 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0704.lzma
2018-10-05T20:33:04.808Z,1538771584.808 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:33:04.808Z,1538771584.808 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-10-05T20:33:04.808Z,1538771584.808 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:33:04.809Z,1538771584.809 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-10-05T20:33:05.176Z,1538771585.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:33:05.176Z,1538771585.176 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:33:05.177Z,1538771585.177 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:33:05.181Z,1538771585.181 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:33:05.182Z,1538771585.182 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:33:05.182Z,1538771585.182 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:33:05.507Z,1538771585.507 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0704.lzma.bak
2018-10-05T20:33:05.507Z,1538771585.507 [DataOverHttps](INFO): SBD MOMSN=8611975
2018-10-05T20:33:06.508Z,1538771586.508 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T20:33:06.508Z,1538771586.508 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T20:33:06.508Z,1538771586.508 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T20:34:57.283Z,1538771697.283 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,48767.52
2018-10-05T20:36:06.602Z,1538771766.602 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:36:06.602Z,1538771766.602 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-10-05T20:36:06.603Z,1538771766.603 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:36:06.604Z,1538771766.604 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:36:06.604Z,1538771766.604 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-10-05T20:36:06.605Z,1538771766.605 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:36:06.650Z,1538771766.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:36:06.650Z,1538771766.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:36:06.767Z,1538771766.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:36:06.767Z,1538771766.767 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-10-05T20:36:06.768Z,1538771766.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:36:06.768Z,1538771766.768 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-10-05T20:36:07.132Z,1538771767.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:36:07.132Z,1538771767.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:36:07.149Z,1538771767.149 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:36:07.149Z,1538771767.149 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:36:07.150Z,1538771767.150 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:36:07.150Z,1538771767.150 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:38:01.740Z,1538771881.740 [RDI_Pathfinder](ERROR): Failed to parse:   +0.00,        +0.00,   0.00,48951.80
2018-10-05T20:38:06.950Z,1538771886.950 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T20:38:06.950Z,1538771886.950 [Default:CheckIn:C.Wait] Stopped
2018-10-05T20:38:06.950Z,1538771886.950 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T20:38:06.950Z,1538771886.950 [Default:CheckIn:D] Running Loop=1
2018-10-05T20:38:07.361Z,1538771887.361 [Default:CheckIn:D] Stopped
2018-10-05T20:38:07.361Z,1538771887.361 [Default:CheckIn:E] Running Loop=1
2018-10-05T20:38:07.749Z,1538771887.749 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2421.659896 min 
2018-10-05T20:38:07.749Z,1538771887.749 [Default:CheckIn:E] Stopped
2018-10-05T20:38:07.749Z,1538771887.749 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T20:38:07.749Z,1538771887.749 [Default:CheckIn] Stopped
2018-10-05T20:38:07.749Z,1538771887.749 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T20:38:07.750Z,1538771887.750 [Default:CheckIn](INFO): Running loop #235
2018-10-05T20:38:07.750Z,1538771887.750 [Default:CheckIn] Running Loop=235
2018-10-05T20:38:07.750Z,1538771887.750 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T20:38:07.750Z,1538771887.750 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T20:39:07.159Z,1538771947.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:39:07.159Z,1538771947.159 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-10-05T20:39:07.159Z,1538771947.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:39:07.165Z,1538771947.165 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:39:07.165Z,1538771947.165 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-10-05T20:39:07.165Z,1538771947.165 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:39:07.191Z,1538771947.191 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:39:07.191Z,1538771947.191 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:39:07.576Z,1538771947.576 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:39:07.576Z,1538771947.576 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-10-05T20:39:07.577Z,1538771947.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:39:07.577Z,1538771947.577 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-10-05T20:39:07.959Z,1538771947.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:39:07.960Z,1538771947.960 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:39:07.960Z,1538771947.960 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:39:07.965Z,1538771947.965 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:39:07.966Z,1538771947.966 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:39:07.966Z,1538771947.966 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:39:49.983Z,1538771989.983 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T20:39:49.983Z,1538771989.983 [NAL9602] Data Fault, FailCount= 5
2018-10-05T20:39:49.983Z,1538771989.983 [NAL9602](ERROR): Data Fault
2018-10-05T20:39:50.057Z,1538771990.057 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T20:39:50.061Z,1538771990.061 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T20:39:50.387Z,1538771990.387 [NAL9602](INFO): Powering down
2018-10-05T20:39:50.467Z,1538771990.467 [CBIT](INFO): Critical error at 20181005T203950
2018-10-05T20:41:50.145Z,1538772110.145 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T20:41:50.146Z,1538772110.146 [NAL9602] No Fault, FailCount= 5
2018-10-05T20:41:50.463Z,1538772110.463 [NAL9602](INFO): Powering up NAL9602
2018-10-05T20:42:01.395Z,1538772121.395 [NAL9602](INFO): NAL9602 initialized
2018-10-05T20:42:08.265Z,1538772128.265 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:42:08.265Z,1538772128.265 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-10-05T20:42:08.265Z,1538772128.265 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:42:08.267Z,1538772128.267 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:42:08.267Z,1538772128.267 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-10-05T20:42:08.267Z,1538772128.267 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:42:08.304Z,1538772128.304 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:42:08.309Z,1538772128.309 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:42:08.667Z,1538772128.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:42:08.667Z,1538772128.667 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-10-05T20:42:08.667Z,1538772128.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:42:08.667Z,1538772128.667 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-10-05T20:42:09.052Z,1538772129.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:42:09.057Z,1538772129.057 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:42:09.058Z,1538772129.058 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:42:09.059Z,1538772129.059 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:42:09.060Z,1538772129.060 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:42:09.060Z,1538772129.060 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:43:10.047Z,1538772190.047 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T20:38:07.7Z
2018-10-05T20:43:10.047Z,1538772190.047 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T20:43:10.047Z,1538772190.047 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T20:43:15.024Z,1538772195.024 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0706.lzma
2018-10-05T20:43:15.806Z,1538772195.806 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0706.lzma.bak
2018-10-05T20:43:15.806Z,1538772195.806 [DataOverHttps](INFO): SBD MOMSN=8611977
2018-10-05T20:43:25.178Z,1538772205.178 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0707.lzma
2018-10-05T20:43:25.984Z,1538772205.984 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0707.lzma.bak
2018-10-05T20:43:25.985Z,1538772205.985 [DataOverHttps](INFO): SBD MOMSN=8611979
2018-10-05T20:43:26.938Z,1538772206.938 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T20:43:26.938Z,1538772206.938 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T20:43:26.938Z,1538772206.938 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T20:44:07.014Z,1538772247.014 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T20:45:09.120Z,1538772309.120 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:45:09.120Z,1538772309.120 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-10-05T20:45:09.120Z,1538772309.120 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:45:09.122Z,1538772309.122 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:45:09.122Z,1538772309.122 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-10-05T20:45:09.122Z,1538772309.122 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:45:09.152Z,1538772309.152 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:45:09.152Z,1538772309.152 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:45:09.511Z,1538772309.511 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:45:09.511Z,1538772309.511 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-10-05T20:45:09.511Z,1538772309.511 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:45:09.511Z,1538772309.511 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-10-05T20:45:09.894Z,1538772309.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:45:09.894Z,1538772309.894 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:45:09.895Z,1538772309.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:45:09.895Z,1538772309.895 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:45:09.896Z,1538772309.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:45:09.896Z,1538772309.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:46:38.372Z,1538772398.372 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T20:46:38.372Z,1538772398.372 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100513513683,35.0, -0.1,   0.0,1448.9,,-32768,-32768,-32768,-32768,V
2018-10-05T20:47:41.594Z,1538772461.594 [BPC1](ERROR): BPC1A: No match for stick with serial number:1717 in the onboard configuration file.
2018-10-05T20:48:12.013Z,1538772492.013 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:48:12.013Z,1538772492.013 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-10-05T20:48:12.013Z,1538772492.013 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:48:12.015Z,1538772492.015 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:48:12.015Z,1538772492.015 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-10-05T20:48:12.015Z,1538772492.015 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:48:12.037Z,1538772492.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:48:12.037Z,1538772492.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:48:12.151Z,1538772492.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:48:12.151Z,1538772492.151 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-10-05T20:48:12.152Z,1538772492.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:48:12.152Z,1538772492.152 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-10-05T20:48:12.513Z,1538772492.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:48:12.513Z,1538772492.513 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:48:12.514Z,1538772492.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:48:12.514Z,1538772492.514 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:48:12.515Z,1538772492.515 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:48:12.515Z,1538772492.515 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:48:27.332Z,1538772507.332 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T20:48:27.332Z,1538772507.332 [Default:CheckIn:C.Wait] Stopped
2018-10-05T20:48:27.332Z,1538772507.332 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T20:48:27.333Z,1538772507.333 [Default:CheckIn:D] Running Loop=1
2018-10-05T20:48:27.713Z,1538772507.713 [Default:CheckIn:D] Stopped
2018-10-05T20:48:27.713Z,1538772507.713 [Default:CheckIn:E] Running Loop=1
2018-10-05T20:48:28.110Z,1538772508.110 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2431.998958 min 
2018-10-05T20:48:28.110Z,1538772508.110 [Default:CheckIn:E] Stopped
2018-10-05T20:48:28.110Z,1538772508.110 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T20:48:28.110Z,1538772508.110 [Default:CheckIn] Stopped
2018-10-05T20:48:28.110Z,1538772508.110 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T20:48:28.111Z,1538772508.111 [Default:CheckIn](INFO): Running loop #236
2018-10-05T20:48:28.111Z,1538772508.111 [Default:CheckIn] Running Loop=236
2018-10-05T20:48:28.111Z,1538772508.111 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T20:48:28.111Z,1538772508.111 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T20:48:36.483Z,1538772516.483 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T20:51:12.779Z,1538772672.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:51:12.779Z,1538772672.779 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-10-05T20:51:12.779Z,1538772672.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:51:12.789Z,1538772672.789 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:51:12.790Z,1538772672.790 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-10-05T20:51:12.790Z,1538772672.790 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:51:12.827Z,1538772672.827 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:51:12.828Z,1538772672.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:51:13.255Z,1538772673.255 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:51:13.256Z,1538772673.256 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-10-05T20:51:13.256Z,1538772673.256 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:51:13.256Z,1538772673.256 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-10-05T20:51:13.542Z,1538772673.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:51:13.543Z,1538772673.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:51:13.543Z,1538772673.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:51:13.543Z,1538772673.543 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:51:13.544Z,1538772673.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:51:13.544Z,1538772673.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:52:02.411Z,1538772722.411 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T20:52:02.411Z,1538772722.411 [NAL9602] Data Fault, FailCount= 1
2018-10-05T20:52:02.411Z,1538772722.411 [NAL9602](ERROR): Data Fault
2018-10-05T20:52:02.501Z,1538772722.501 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T20:52:02.811Z,1538772722.811 [NAL9602](INFO): Powering down
2018-10-05T20:52:03.681Z,1538772723.681 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T20:52:03.681Z,1538772723.681 [NAL9602] No Fault, FailCount= 1
2018-10-05T20:52:32.921Z,1538772752.921 [NAL9602](INFO): Powering up NAL9602
2018-10-05T20:52:44.119Z,1538772764.119 [NAL9602](INFO): NAL9602 initialized
2018-10-05T20:53:29.544Z,1538772809.544 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T20:48:28.1Z
2018-10-05T20:53:29.544Z,1538772809.544 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T20:53:29.544Z,1538772809.544 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T20:53:34.626Z,1538772814.626 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0709.lzma
2018-10-05T20:53:35.396Z,1538772815.396 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0709.lzma.bak
2018-10-05T20:53:35.396Z,1538772815.396 [DataOverHttps](INFO): SBD MOMSN=8611981
2018-10-05T20:53:44.809Z,1538772824.809 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0710.lzma
2018-10-05T20:53:45.574Z,1538772825.574 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0710.lzma.bak
2018-10-05T20:53:45.574Z,1538772825.574 [DataOverHttps](INFO): SBD MOMSN=8611983
2018-10-05T20:53:46.686Z,1538772826.686 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T20:53:46.686Z,1538772826.686 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T20:53:46.686Z,1538772826.686 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T20:54:13.636Z,1538772853.636 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:54:13.636Z,1538772853.636 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-10-05T20:54:13.637Z,1538772853.637 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:54:13.639Z,1538772853.639 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:54:13.639Z,1538772853.639 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-10-05T20:54:13.639Z,1538772853.639 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:54:13.652Z,1538772853.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:54:13.652Z,1538772853.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:54:14.117Z,1538772854.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:54:14.117Z,1538772854.117 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-10-05T20:54:14.117Z,1538772854.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:54:14.118Z,1538772854.118 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-10-05T20:54:14.438Z,1538772854.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:54:14.438Z,1538772854.438 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:54:14.439Z,1538772854.439 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:54:14.439Z,1538772854.439 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:54:14.439Z,1538772854.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:54:14.440Z,1538772854.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:54:57.370Z,1538772897.370 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T20:54:57.370Z,1538772897.370 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.0  +0.00,        +0.00,   0.00,49963.83
2018-10-05T20:57:14.615Z,1538773034.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:57:14.616Z,1538773034.616 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-10-05T20:57:14.616Z,1538773034.616 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T20:57:14.618Z,1538773034.618 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T20:57:14.618Z,1538773034.618 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-10-05T20:57:14.618Z,1538773034.618 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T20:57:14.656Z,1538773034.656 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T20:57:14.656Z,1538773034.656 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T20:57:15.056Z,1538773035.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T20:57:15.056Z,1538773035.056 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-10-05T20:57:15.061Z,1538773035.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T20:57:15.061Z,1538773035.061 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-10-05T20:57:15.410Z,1538773035.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T20:57:15.410Z,1538773035.410 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:57:15.411Z,1538773035.411 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:57:15.411Z,1538773035.411 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T20:57:15.412Z,1538773035.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T20:57:15.412Z,1538773035.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T20:58:46.888Z,1538773126.888 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T20:58:46.888Z,1538773126.888 [Default:CheckIn:C.Wait] Stopped
2018-10-05T20:58:46.889Z,1538773126.889 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T20:58:46.889Z,1538773126.889 [Default:CheckIn:D] Running Loop=1
2018-10-05T20:58:47.310Z,1538773127.310 [Default:CheckIn:D] Stopped
2018-10-05T20:58:47.310Z,1538773127.310 [Default:CheckIn:E] Running Loop=1
2018-10-05T20:58:47.689Z,1538773127.689 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2442.325781 min 
2018-10-05T20:58:47.689Z,1538773127.689 [Default:CheckIn:E] Stopped
2018-10-05T20:58:47.690Z,1538773127.690 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T20:58:47.690Z,1538773127.690 [Default:CheckIn] Stopped
2018-10-05T20:58:47.690Z,1538773127.690 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T20:58:47.690Z,1538773127.690 [Default:CheckIn](INFO): Running loop #237
2018-10-05T20:58:47.690Z,1538773127.690 [Default:CheckIn] Running Loop=237
2018-10-05T20:58:47.690Z,1538773127.690 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T20:58:47.690Z,1538773127.690 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T20:59:12.998Z,1538773152.998 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T20:59:12.998Z,1538773152.998 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.0  +0.00,   0.00,50218.83
2018-10-05T21:00:15.507Z,1538773215.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:00:15.507Z,1538773215.507 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-10-05T21:00:15.507Z,1538773215.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:00:15.513Z,1538773215.513 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:00:15.513Z,1538773215.513 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-10-05T21:00:15.513Z,1538773215.513 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:00:15.547Z,1538773215.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:00:15.547Z,1538773215.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:00:18.711Z,1538773218.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:00:18.711Z,1538773218.711 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-10-05T21:00:18.712Z,1538773218.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:00:18.712Z,1538773218.712 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-10-05T21:00:18.830Z,1538773218.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:00:18.830Z,1538773218.830 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:00:18.831Z,1538773218.831 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:00:18.831Z,1538773218.831 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:00:18.832Z,1538773218.832 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:00:18.832Z,1538773218.832 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:02:44.948Z,1538773364.948 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T21:02:44.948Z,1538773364.948 [NAL9602] Data Fault, FailCount= 2
2018-10-05T21:02:44.949Z,1538773364.949 [NAL9602](ERROR): Data Fault
2018-10-05T21:02:45.049Z,1538773365.049 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T21:02:45.343Z,1538773365.343 [NAL9602](INFO): Powering down
2018-10-05T21:02:46.204Z,1538773366.204 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T21:02:46.204Z,1538773366.204 [NAL9602] No Fault, FailCount= 2
2018-10-05T21:03:15.359Z,1538773395.359 [NAL9602](INFO): Powering up NAL9602
2018-10-05T21:03:19.116Z,1538773399.116 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:03:19.117Z,1538773399.117 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-10-05T21:03:19.121Z,1538773399.121 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:03:19.123Z,1538773399.123 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:03:19.123Z,1538773399.123 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-10-05T21:03:19.123Z,1538773399.123 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:03:19.145Z,1538773399.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:03:19.145Z,1538773399.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:03:19.506Z,1538773399.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:03:19.506Z,1538773399.506 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-10-05T21:03:19.507Z,1538773399.507 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:03:19.507Z,1538773399.507 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-10-05T21:03:19.894Z,1538773399.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:03:19.894Z,1538773399.894 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:03:19.895Z,1538773399.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:03:19.895Z,1538773399.895 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:03:19.895Z,1538773399.895 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:03:19.896Z,1538773399.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:03:26.259Z,1538773406.259 [NAL9602](INFO): NAL9602 initialized
2018-10-05T21:03:50.738Z,1538773430.738 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T20:58:47.7Z
2018-10-05T21:03:50.738Z,1538773430.738 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T21:03:50.738Z,1538773430.738 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T21:03:55.709Z,1538773435.709 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0712.lzma
2018-10-05T21:03:56.483Z,1538773436.483 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0712.lzma.bak
2018-10-05T21:03:56.483Z,1538773436.483 [DataOverHttps](INFO): SBD MOMSN=8611985
2018-10-05T21:04:05.757Z,1538773445.757 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20181004T041305/Express0713.lzma
2018-10-05T21:04:06.514Z,1538773446.514 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0713.lzma.bak
2018-10-05T21:04:06.514Z,1538773446.514 [DataOverHttps](INFO): SBD MOMSN=8611987
2018-10-05T21:04:07.498Z,1538773447.498 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T21:04:07.499Z,1538773447.499 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T21:04:07.499Z,1538773447.499 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T21:06:19.939Z,1538773579.939 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:06:19.939Z,1538773579.939 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2018-10-05T21:06:19.939Z,1538773579.939 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:06:19.945Z,1538773579.945 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:06:19.945Z,1538773579.945 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2018-10-05T21:06:19.945Z,1538773579.945 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:06:19.963Z,1538773579.963 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:06:19.963Z,1538773579.963 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:06:20.369Z,1538773580.369 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:06:20.381Z,1538773580.381 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2018-10-05T21:06:20.381Z,1538773580.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:06:20.381Z,1538773580.381 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2018-10-05T21:06:20.742Z,1538773580.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:06:20.742Z,1538773580.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:06:20.743Z,1538773580.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:06:20.743Z,1538773580.743 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:06:20.743Z,1538773580.743 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:06:20.744Z,1538773580.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:09:08.016Z,1538773748.016 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T21:09:08.016Z,1538773748.016 [Default:CheckIn:C.Wait] Stopped
2018-10-05T21:09:08.017Z,1538773748.017 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T21:09:08.017Z,1538773748.017 [Default:CheckIn:D] Running Loop=1
2018-10-05T21:09:08.403Z,1538773748.403 [Default:CheckIn:D] Stopped
2018-10-05T21:09:08.403Z,1538773748.403 [Default:CheckIn:E] Running Loop=1
2018-10-05T21:09:08.809Z,1538773748.809 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2452.677344 min 
2018-10-05T21:09:08.809Z,1538773748.809 [Default:CheckIn:E] Stopped
2018-10-05T21:09:08.810Z,1538773748.810 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T21:09:08.810Z,1538773748.810 [Default:CheckIn] Stopped
2018-10-05T21:09:08.810Z,1538773748.810 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T21:09:08.810Z,1538773748.810 [Default:CheckIn](INFO): Running loop #238
2018-10-05T21:09:08.810Z,1538773748.810 [Default:CheckIn] Running Loop=238
2018-10-05T21:09:08.810Z,1538773748.810 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T21:09:08.810Z,1538773748.810 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T21:09:20.808Z,1538773760.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:09:20.808Z,1538773760.808 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2018-10-05T21:09:20.808Z,1538773760.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:09:20.810Z,1538773760.810 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:09:20.810Z,1538773760.810 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2018-10-05T21:09:20.810Z,1538773760.810 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:09:20.832Z,1538773760.832 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:09:20.832Z,1538773760.832 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:09:21.204Z,1538773761.204 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:09:21.204Z,1538773761.204 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2018-10-05T21:09:21.204Z,1538773761.204 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:09:21.204Z,1538773761.204 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2018-10-05T21:09:21.629Z,1538773761.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:09:21.630Z,1538773761.630 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:09:21.630Z,1538773761.630 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:09:21.631Z,1538773761.631 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:09:21.631Z,1538773761.631 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:09:21.632Z,1538773761.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:12:02.675Z,1538773922.675 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T21:12:02.676Z,1538773922.676 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100514170083,35.0, -.0,1448.9,  0
2018-10-05T21:12:24.742Z,1538773944.742 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:12:24.742Z,1538773944.742 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2018-10-05T21:12:24.742Z,1538773944.742 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:12:24.744Z,1538773944.744 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:12:24.744Z,1538773944.744 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2018-10-05T21:12:24.744Z,1538773944.744 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:12:24.758Z,1538773944.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:12:24.758Z,1538773944.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:12:24.883Z,1538773944.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:12:24.883Z,1538773944.883 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2018-10-05T21:12:24.883Z,1538773944.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:12:24.883Z,1538773944.883 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2018-10-05T21:12:25.253Z,1538773945.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:12:25.254Z,1538773945.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:12:25.254Z,1538773945.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:12:25.255Z,1538773945.255 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:12:25.255Z,1538773945.255 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:12:25.255Z,1538773945.255 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:13:06.137Z,1538773986.137 [RDI_Pathfinder](ERROR): only read -1 of 1 data item for BIT error
2018-10-05T21:13:06.138Z,1538773986.138 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100514180383,35.0, -0.1,   0.0,1448.9,  

2018-10-05T21:13:28.487Z,1538774008.487 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T21:13:28.487Z,1538774008.487 [NAL9602] Data Fault, FailCount= 3
2018-10-05T21:13:28.487Z,1538774008.487 [NAL9602](ERROR): Data Fault
2018-10-05T21:13:28.574Z,1538774008.574 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T21:13:28.887Z,1538774008.887 [NAL9602](INFO): Powering down
2018-10-05T21:13:29.750Z,1538774009.750 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T21:13:29.751Z,1538774009.751 [NAL9602] No Fault, FailCount= 3
2018-10-05T21:13:58.980Z,1538774038.980 [NAL9602](INFO): Powering up NAL9602
2018-10-05T21:14:10.612Z,1538774050.612 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T21:09:08.8Z
2018-10-05T21:14:10.612Z,1538774050.612 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T21:14:10.612Z,1538774050.612 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T21:14:11.343Z,1538774051.343 [NAL9602](INFO): NAL9602 initialized
2018-10-05T21:14:15.577Z,1538774055.577 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0715.lzma
2018-10-05T21:14:16.354Z,1538774056.354 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0715.lzma.bak
2018-10-05T21:14:16.354Z,1538774056.354 [DataOverHttps](INFO): SBD MOMSN=8611989
2018-10-05T21:14:34.756Z,1538774074.756 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0716.lzma
2018-10-05T21:14:35.518Z,1538774075.518 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0716.lzma.bak
2018-10-05T21:14:35.519Z,1538774075.519 [DataOverHttps](INFO): SBD MOMSN=8611991
2018-10-05T21:14:36.498Z,1538774076.498 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T21:14:36.498Z,1538774076.498 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T21:14:36.498Z,1538774076.498 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T21:15:25.559Z,1538774125.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:15:25.559Z,1538774125.559 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2018-10-05T21:15:25.559Z,1538774125.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:15:25.565Z,1538774125.565 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:15:25.565Z,1538774125.565 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2018-10-05T21:15:25.565Z,1538774125.565 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:15:25.587Z,1538774125.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:15:25.587Z,1538774125.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:15:26.022Z,1538774126.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:15:26.022Z,1538774126.022 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2018-10-05T21:15:26.022Z,1538774126.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:15:26.022Z,1538774126.022 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2018-10-05T21:15:26.366Z,1538774126.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:15:26.366Z,1538774126.366 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:15:26.367Z,1538774126.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:15:26.367Z,1538774126.367 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:15:26.367Z,1538774126.367 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:15:26.368Z,1538774126.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:18:26.779Z,1538774306.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:18:26.779Z,1538774306.779 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2018-10-05T21:18:26.779Z,1538774306.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:18:26.781Z,1538774306.781 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:18:26.781Z,1538774306.781 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2018-10-05T21:18:26.781Z,1538774306.781 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:18:26.795Z,1538774306.795 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:18:26.795Z,1538774306.795 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:18:27.186Z,1538774307.186 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:18:27.186Z,1538774307.186 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2018-10-05T21:18:27.187Z,1538774307.187 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:18:27.187Z,1538774307.187 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2018-10-05T21:18:27.573Z,1538774307.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:18:27.574Z,1538774307.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:18:27.574Z,1538774307.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:18:27.575Z,1538774307.575 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:18:27.575Z,1538774307.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:18:27.575Z,1538774307.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:19:36.983Z,1538774376.983 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T21:19:36.983Z,1538774376.983 [Default:CheckIn:C.Wait] Stopped
2018-10-05T21:19:36.983Z,1538774376.983 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T21:19:36.983Z,1538774376.983 [Default:CheckIn:D] Running Loop=1
2018-10-05T21:19:37.365Z,1538774377.365 [Default:CheckIn:D] Stopped
2018-10-05T21:19:37.365Z,1538774377.365 [Default:CheckIn:E] Running Loop=1
2018-10-05T21:19:37.765Z,1538774377.765 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2463.159896 min 
2018-10-05T21:19:37.765Z,1538774377.765 [Default:CheckIn:E] Stopped
2018-10-05T21:19:37.766Z,1538774377.766 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T21:19:37.766Z,1538774377.766 [Default:CheckIn] Stopped
2018-10-05T21:19:37.766Z,1538774377.766 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T21:19:37.766Z,1538774377.766 [Default:CheckIn](INFO): Running loop #239
2018-10-05T21:19:37.766Z,1538774377.766 [Default:CheckIn] Running Loop=239
2018-10-05T21:19:37.766Z,1538774377.766 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T21:19:37.766Z,1538774377.766 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T21:21:27.619Z,1538774487.619 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:21:27.619Z,1538774487.619 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2018-10-05T21:21:27.619Z,1538774487.619 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:21:27.625Z,1538774487.625 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:21:27.626Z,1538774487.626 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2018-10-05T21:21:27.626Z,1538774487.626 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:21:27.647Z,1538774487.647 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:21:27.648Z,1538774487.648 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:21:28.048Z,1538774488.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:21:28.048Z,1538774488.048 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2018-10-05T21:21:28.053Z,1538774488.053 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:21:28.053Z,1538774488.053 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2018-10-05T21:21:28.410Z,1538774488.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:21:28.410Z,1538774488.410 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:21:28.411Z,1538774488.411 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:21:28.411Z,1538774488.411 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:21:28.411Z,1538774488.411 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:21:28.412Z,1538774488.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:24:12.091Z,1538774652.091 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T21:24:12.091Z,1538774652.091 [NAL9602] Data Fault, FailCount= 4
2018-10-05T21:24:12.091Z,1538774652.091 [NAL9602](ERROR): Data Fault
2018-10-05T21:24:12.171Z,1538774652.171 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T21:24:12.495Z,1538774652.495 [NAL9602](INFO): Powering down
2018-10-05T21:24:13.371Z,1538774653.371 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T21:24:13.371Z,1538774653.371 [NAL9602] No Fault, FailCount= 4
2018-10-05T21:24:28.532Z,1538774668.532 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:24:28.532Z,1538774668.532 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2018-10-05T21:24:28.532Z,1538774668.532 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:24:28.534Z,1538774668.534 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:24:28.534Z,1538774668.534 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2018-10-05T21:24:28.535Z,1538774668.535 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:24:28.548Z,1538774668.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:24:28.548Z,1538774668.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:24:28.982Z,1538774668.982 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:24:28.982Z,1538774668.982 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2018-10-05T21:24:28.983Z,1538774668.983 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:24:28.983Z,1538774668.983 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2018-10-05T21:24:29.346Z,1538774669.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:24:29.346Z,1538774669.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:24:29.347Z,1538774669.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:24:29.347Z,1538774669.347 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:24:29.348Z,1538774669.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:24:29.348Z,1538774669.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:24:40.128Z,1538774680.128 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T21:19:37.8Z
2018-10-05T21:24:40.128Z,1538774680.128 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T21:24:40.128Z,1538774680.128 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T21:24:44.955Z,1538774684.955 [NAL9602](INFO): Powering up NAL9602
2018-10-05T21:24:45.095Z,1538774685.095 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0718.lzma
2018-10-05T21:24:45.877Z,1538774685.877 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0718.lzma.bak
2018-10-05T21:24:45.878Z,1538774685.878 [DataOverHttps](INFO): SBD MOMSN=8611993
2018-10-05T21:24:55.121Z,1538774695.121 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0719.lzma
2018-10-05T21:24:55.491Z,1538774695.491 [NAL9602](INFO): NAL9602 initialized
2018-10-05T21:24:55.875Z,1538774695.875 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0719.lzma.bak
2018-10-05T21:24:55.875Z,1538774695.875 [DataOverHttps](INFO): SBD MOMSN=8611995
2018-10-05T21:24:56.827Z,1538774696.827 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T21:24:56.827Z,1538774696.827 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T21:24:56.827Z,1538774696.827 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T21:27:29.528Z,1538774849.528 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:27:29.529Z,1538774849.529 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2018-10-05T21:27:29.529Z,1538774849.529 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:27:29.531Z,1538774849.531 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:27:29.531Z,1538774849.531 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2018-10-05T21:27:29.532Z,1538774849.532 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:27:29.544Z,1538774849.544 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:27:29.545Z,1538774849.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:27:29.940Z,1538774849.940 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:27:29.940Z,1538774849.940 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2018-10-05T21:27:29.940Z,1538774849.940 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:27:29.941Z,1538774849.941 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2018-10-05T21:27:30.330Z,1538774850.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:27:30.331Z,1538774850.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:27:30.331Z,1538774850.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:27:30.332Z,1538774850.332 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:27:30.332Z,1538774850.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:27:30.332Z,1538774850.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:29:57.092Z,1538774997.092 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T21:29:57.092Z,1538774997.092 [Default:CheckIn:C.Wait] Stopped
2018-10-05T21:29:57.092Z,1538774997.092 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T21:29:57.092Z,1538774997.092 [Default:CheckIn:D] Running Loop=1
2018-10-05T21:29:57.477Z,1538774997.477 [Default:CheckIn:D] Stopped
2018-10-05T21:29:57.477Z,1538774997.477 [Default:CheckIn:E] Running Loop=1
2018-10-05T21:29:57.889Z,1538774997.889 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2473.495052 min 
2018-10-05T21:29:57.890Z,1538774997.890 [Default:CheckIn:E] Stopped
2018-10-05T21:29:57.890Z,1538774997.890 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T21:29:57.890Z,1538774997.890 [Default:CheckIn] Stopped
2018-10-05T21:29:57.890Z,1538774997.890 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T21:29:57.890Z,1538774997.890 [Default:CheckIn](INFO): Running loop #240
2018-10-05T21:29:57.890Z,1538774997.890 [Default:CheckIn] Running Loop=240
2018-10-05T21:29:57.891Z,1538774997.891 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T21:29:57.891Z,1538774997.891 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T21:30:30.371Z,1538775030.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:30:30.371Z,1538775030.371 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2018-10-05T21:30:30.371Z,1538775030.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:30:30.373Z,1538775030.373 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:30:30.373Z,1538775030.373 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2018-10-05T21:30:30.373Z,1538775030.373 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:30:30.386Z,1538775030.386 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:30:30.387Z,1538775030.387 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:30:30.771Z,1538775030.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:30:30.771Z,1538775030.771 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2018-10-05T21:30:30.771Z,1538775030.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:30:30.772Z,1538775030.772 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2018-10-05T21:30:31.134Z,1538775031.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:30:31.134Z,1538775031.134 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:30:31.135Z,1538775031.135 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:30:31.135Z,1538775031.135 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:30:31.135Z,1538775031.135 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:30:31.136Z,1538775031.136 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:33:31.479Z,1538775211.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:33:31.479Z,1538775211.479 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2018-10-05T21:33:31.479Z,1538775211.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:33:31.485Z,1538775211.485 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:33:31.485Z,1538775211.485 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2018-10-05T21:33:31.485Z,1538775211.485 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:33:31.511Z,1538775211.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:33:31.511Z,1538775211.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:33:31.851Z,1538775211.851 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:33:31.851Z,1538775211.851 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2018-10-05T21:33:31.852Z,1538775211.852 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:33:31.852Z,1538775211.852 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2018-10-05T21:33:32.243Z,1538775212.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:33:32.244Z,1538775212.244 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:33:32.249Z,1538775212.249 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:33:32.250Z,1538775212.250 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:33:32.251Z,1538775212.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:33:32.252Z,1538775212.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:35:00.002Z,1538775300.002 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T21:29:57.9Z
2018-10-05T21:35:00.002Z,1538775300.002 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T21:35:00.002Z,1538775300.002 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T21:35:00.096Z,1538775300.096 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T21:35:00.096Z,1538775300.096 [NAL9602] Data Fault, FailCount= 5
2018-10-05T21:35:00.096Z,1538775300.096 [NAL9602](ERROR): Data Fault
2018-10-05T21:35:00.184Z,1538775300.184 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T21:35:00.189Z,1538775300.189 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T21:35:01.562Z,1538775301.562 [NAL9602](INFO): Powering down
2018-10-05T21:35:01.661Z,1538775301.661 [CBIT](INFO): Critical error at 20181005T213500
2018-10-05T21:35:05.810Z,1538775305.810 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0721.lzma
2018-10-05T21:35:06.574Z,1538775306.574 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0721.lzma.bak
2018-10-05T21:35:06.574Z,1538775306.574 [DataOverHttps](INFO): SBD MOMSN=8611997
2018-10-05T21:35:17.689Z,1538775317.689 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0722.lzma
2018-10-05T21:35:19.120Z,1538775319.120 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0722.lzma.bak
2018-10-05T21:35:19.120Z,1538775319.120 [DataOverHttps](INFO): SBD MOMSN=8611999
2018-10-05T21:35:28.093Z,1538775328.093 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0722.lzma
2018-10-05T21:35:28.889Z,1538775328.889 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0722.lzma.bak
2018-10-05T21:35:28.889Z,1538775328.889 [DataOverHttps](INFO): SBD MOMSN=8612001
2018-10-05T21:35:29.831Z,1538775329.831 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T21:35:29.831Z,1538775329.831 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T21:35:29.831Z,1538775329.831 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T21:36:32.534Z,1538775392.534 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:36:32.534Z,1538775392.534 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2018-10-05T21:36:32.534Z,1538775392.534 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:36:32.536Z,1538775392.536 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:36:32.536Z,1538775392.536 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2018-10-05T21:36:32.536Z,1538775392.536 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:36:32.574Z,1538775392.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:36:32.574Z,1538775392.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:36:32.957Z,1538775392.957 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:36:32.957Z,1538775392.957 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2018-10-05T21:36:32.958Z,1538775392.958 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:36:32.958Z,1538775392.958 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2018-10-05T21:36:33.341Z,1538775393.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:36:33.356Z,1538775393.356 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:36:33.365Z,1538775393.365 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:36:33.366Z,1538775393.366 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:36:33.366Z,1538775393.366 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:36:33.366Z,1538775393.366 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:37:00.304Z,1538775420.304 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T21:37:00.304Z,1538775420.304 [NAL9602] No Fault, FailCount= 5
2018-10-05T21:37:00.615Z,1538775420.615 [NAL9602](INFO): Powering up NAL9602
2018-10-05T21:37:11.415Z,1538775431.415 [NAL9602](INFO): NAL9602 initialized
2018-10-05T21:38:31.349Z,1538775511.349 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T21:39:33.477Z,1538775573.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:39:33.477Z,1538775573.477 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2018-10-05T21:39:33.478Z,1538775573.478 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:39:33.479Z,1538775573.479 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:39:33.480Z,1538775573.480 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2018-10-05T21:39:33.480Z,1538775573.480 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:39:33.493Z,1538775573.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:39:33.493Z,1538775573.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:39:33.908Z,1538775573.908 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:39:33.908Z,1538775573.908 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2018-10-05T21:39:33.913Z,1538775573.913 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:39:33.913Z,1538775573.913 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2018-10-05T21:39:34.282Z,1538775574.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:39:34.282Z,1538775574.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:39:34.283Z,1538775574.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:39:34.283Z,1538775574.283 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:39:34.283Z,1538775574.283 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:39:34.284Z,1538775574.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:40:30.112Z,1538775630.112 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T21:40:30.112Z,1538775630.112 [Default:CheckIn:C.Wait] Stopped
2018-10-05T21:40:30.112Z,1538775630.112 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T21:40:30.112Z,1538775630.112 [Default:CheckIn:D] Running Loop=1
2018-10-05T21:40:30.505Z,1538775630.505 [Default:CheckIn:D] Stopped
2018-10-05T21:40:30.505Z,1538775630.505 [Default:CheckIn:E] Running Loop=1
2018-10-05T21:40:30.881Z,1538775630.881 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2484.045573 min 
2018-10-05T21:40:30.881Z,1538775630.881 [Default:CheckIn:E] Stopped
2018-10-05T21:40:30.882Z,1538775630.882 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T21:40:30.882Z,1538775630.882 [Default:CheckIn] Stopped
2018-10-05T21:40:30.882Z,1538775630.882 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T21:40:30.882Z,1538775630.882 [Default:CheckIn](INFO): Running loop #241
2018-10-05T21:40:30.882Z,1538775630.882 [Default:CheckIn] Running Loop=241
2018-10-05T21:40:30.882Z,1538775630.882 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T21:40:30.882Z,1538775630.882 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T21:42:36.951Z,1538775756.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:42:36.951Z,1538775756.951 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2018-10-05T21:42:36.951Z,1538775756.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:42:36.953Z,1538775756.953 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:42:36.954Z,1538775756.954 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2018-10-05T21:42:36.954Z,1538775756.954 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:42:36.987Z,1538775756.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:42:36.988Z,1538775756.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:42:37.111Z,1538775757.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:42:37.111Z,1538775757.111 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2018-10-05T21:42:37.112Z,1538775757.112 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:42:37.112Z,1538775757.112 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2018-10-05T21:42:37.462Z,1538775757.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:42:37.462Z,1538775757.462 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:42:37.463Z,1538775757.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:42:37.463Z,1538775757.463 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:42:37.464Z,1538775757.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:42:37.464Z,1538775757.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:43:13.161Z,1538775793.161 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe,*15.887,*-0.008,*0.000
2018-10-05T21:45:31.070Z,1538775931.070 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T21:40:30.9Z
2018-10-05T21:45:31.070Z,1538775931.070 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T21:45:31.071Z,1538775931.071 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T21:45:34.884Z,1538775934.884 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0724.lzma
2018-10-05T21:45:35.391Z,1538775935.391 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0724.lzma.bak
2018-10-05T21:45:35.391Z,1538775935.391 [DataOverHttps](INFO): SBD MOMSN=8612003
2018-10-05T21:45:39.656Z,1538775939.656 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:45:39.656Z,1538775939.656 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2018-10-05T21:45:39.656Z,1538775939.656 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:45:39.658Z,1538775939.658 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:45:39.658Z,1538775939.658 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2018-10-05T21:45:39.658Z,1538775939.658 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:45:39.761Z,1538775939.761 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:45:39.761Z,1538775939.761 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:45:39.866Z,1538775939.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:45:39.866Z,1538775939.866 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2018-10-05T21:45:39.867Z,1538775939.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:45:39.867Z,1538775939.867 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2018-10-05T21:45:40.238Z,1538775940.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:45:40.238Z,1538775940.238 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:45:40.239Z,1538775940.239 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:45:40.239Z,1538775940.239 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:45:40.239Z,1538775940.239 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:45:40.240Z,1538775940.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:45:44.689Z,1538775944.689 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20181004T041305/Express0725.lzma
2018-10-05T21:45:45.466Z,1538775945.466 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0725.lzma.bak
2018-10-05T21:45:45.466Z,1538775945.466 [DataOverHttps](INFO): SBD MOMSN=8612005
2018-10-05T21:45:46.462Z,1538775946.462 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T21:45:46.462Z,1538775946.462 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T21:45:46.462Z,1538775946.462 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T21:47:12.531Z,1538776032.531 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T21:47:12.531Z,1538776032.531 [NAL9602] Data Fault, FailCount= 1
2018-10-05T21:47:12.531Z,1538776032.531 [NAL9602](ERROR): Data Fault
2018-10-05T21:47:12.626Z,1538776032.626 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T21:47:12.939Z,1538776032.939 [NAL9602](INFO): Powering down
2018-10-05T21:47:13.779Z,1538776033.779 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T21:47:13.779Z,1538776033.779 [NAL9602] No Fault, FailCount= 1
2018-10-05T21:47:43.007Z,1538776063.007 [NAL9602](INFO): Powering up NAL9602
2018-10-05T21:47:54.211Z,1538776074.211 [NAL9602](INFO): NAL9602 initialized
2018-10-05T21:48:40.365Z,1538776120.365 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:48:40.365Z,1538776120.365 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2018-10-05T21:48:40.365Z,1538776120.365 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:48:40.367Z,1538776120.367 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:48:40.367Z,1538776120.367 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2018-10-05T21:48:40.367Z,1538776120.367 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:48:40.393Z,1538776120.393 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:48:40.393Z,1538776120.393 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:48:40.763Z,1538776120.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:48:40.763Z,1538776120.763 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2018-10-05T21:48:40.764Z,1538776120.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:48:40.764Z,1538776120.764 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2018-10-05T21:48:41.138Z,1538776121.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:48:41.139Z,1538776121.139 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:48:41.139Z,1538776121.139 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:48:41.140Z,1538776121.140 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:48:41.140Z,1538776121.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:48:41.140Z,1538776121.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:50:46.777Z,1538776246.777 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T21:50:46.777Z,1538776246.777 [Default:CheckIn:C.Wait] Stopped
2018-10-05T21:50:46.777Z,1538776246.777 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T21:50:46.777Z,1538776246.777 [Default:CheckIn:D] Running Loop=1
2018-10-05T21:50:47.204Z,1538776247.204 [Default:CheckIn:D] Stopped
2018-10-05T21:50:47.204Z,1538776247.204 [Default:CheckIn:E] Running Loop=1
2018-10-05T21:50:47.593Z,1538776247.593 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2494.323958 min 
2018-10-05T21:50:47.594Z,1538776247.594 [Default:CheckIn:E] Stopped
2018-10-05T21:50:47.594Z,1538776247.594 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T21:50:47.594Z,1538776247.594 [Default:CheckIn] Stopped
2018-10-05T21:50:47.594Z,1538776247.594 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T21:50:47.594Z,1538776247.594 [Default:CheckIn](INFO): Running loop #242
2018-10-05T21:50:47.594Z,1538776247.594 [Default:CheckIn] Running Loop=242
2018-10-05T21:50:47.594Z,1538776247.594 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T21:50:47.594Z,1538776247.594 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T21:51:43.608Z,1538776303.608 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:51:43.608Z,1538776303.608 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2018-10-05T21:51:43.608Z,1538776303.608 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:51:43.610Z,1538776303.610 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:51:43.610Z,1538776303.610 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2018-10-05T21:51:43.610Z,1538776303.610 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:51:43.644Z,1538776303.644 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:51:43.645Z,1538776303.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:51:43.770Z,1538776303.770 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:51:43.770Z,1538776303.770 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2018-10-05T21:51:43.771Z,1538776303.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:51:43.771Z,1538776303.771 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2018-10-05T21:51:44.154Z,1538776304.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:51:44.154Z,1538776304.154 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:51:44.155Z,1538776304.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:51:44.155Z,1538776304.155 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:51:44.155Z,1538776304.155 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:51:44.156Z,1538776304.156 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:54:44.454Z,1538776484.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:54:44.454Z,1538776484.454 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2018-10-05T21:54:44.454Z,1538776484.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:54:44.456Z,1538776484.456 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:54:44.456Z,1538776484.456 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2018-10-05T21:54:44.456Z,1538776484.456 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:54:44.482Z,1538776484.482 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:54:44.483Z,1538776484.483 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:54:44.885Z,1538776484.885 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:54:44.886Z,1538776484.886 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2018-10-05T21:54:44.887Z,1538776484.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:54:44.887Z,1538776484.887 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2018-10-05T21:54:45.261Z,1538776485.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:54:45.262Z,1538776485.262 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:54:45.262Z,1538776485.262 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:54:45.263Z,1538776485.263 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:54:45.263Z,1538776485.263 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:54:45.263Z,1538776485.263 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:55:50.215Z,1538776550.215 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T21:50:47.6Z
2018-10-05T21:55:50.215Z,1538776550.215 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T21:55:50.215Z,1538776550.215 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T21:55:55.210Z,1538776555.210 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0727.lzma
2018-10-05T21:55:56.006Z,1538776556.006 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0727.lzma.bak
2018-10-05T21:55:56.007Z,1538776556.007 [DataOverHttps](INFO): SBD MOMSN=8612007
2018-10-05T21:56:05.385Z,1538776565.385 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0728.lzma
2018-10-05T21:56:06.150Z,1538776566.150 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0728.lzma.bak
2018-10-05T21:56:06.150Z,1538776566.150 [DataOverHttps](INFO): SBD MOMSN=8612009
2018-10-05T21:56:07.171Z,1538776567.171 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T21:56:07.171Z,1538776567.171 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T21:56:07.171Z,1538776567.171 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T21:56:07.260Z,1538776567.260 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T21:57:45.495Z,1538776665.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:57:45.495Z,1538776665.495 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2018-10-05T21:57:45.496Z,1538776665.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T21:57:45.498Z,1538776665.498 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T21:57:45.498Z,1538776665.498 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2018-10-05T21:57:45.498Z,1538776665.498 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T21:57:45.532Z,1538776665.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T21:57:45.532Z,1538776665.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T21:57:45.940Z,1538776665.940 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T21:57:45.941Z,1538776665.941 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2018-10-05T21:57:45.942Z,1538776665.942 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T21:57:45.942Z,1538776665.942 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2018-10-05T21:57:46.302Z,1538776666.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T21:57:46.302Z,1538776666.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:57:46.303Z,1538776666.303 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:57:46.303Z,1538776666.303 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T21:57:46.303Z,1538776666.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T21:57:46.304Z,1538776666.304 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T21:57:57.547Z,1538776677.547 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T21:57:57.547Z,1538776677.547 [NAL9602] Data Fault, FailCount= 2
2018-10-05T21:57:57.547Z,1538776677.547 [NAL9602](ERROR): Data Fault
2018-10-05T21:57:57.621Z,1538776677.621 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T21:57:57.944Z,1538776677.944 [NAL9602](INFO): Powering down
2018-10-05T21:57:58.808Z,1538776678.808 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T21:57:58.808Z,1538776678.808 [NAL9602] No Fault, FailCount= 2
2018-10-05T21:58:28.344Z,1538776708.344 [NAL9602](INFO): Powering up NAL9602
2018-10-05T21:58:39.219Z,1538776719.219 [NAL9602](INFO): NAL9602 initialized
2018-10-05T21:59:08.144Z,1538776748.144 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T22:00:46.319Z,1538776846.319 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:00:46.319Z,1538776846.319 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2018-10-05T22:00:46.319Z,1538776846.319 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:00:46.321Z,1538776846.321 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:00:46.321Z,1538776846.321 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2018-10-05T22:00:46.321Z,1538776846.321 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:00:46.335Z,1538776846.335 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:00:46.335Z,1538776846.335 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:00:46.742Z,1538776846.742 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:00:46.743Z,1538776846.743 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2018-10-05T22:00:46.743Z,1538776846.743 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:00:46.743Z,1538776846.743 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2018-10-05T22:00:47.131Z,1538776847.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:00:47.132Z,1538776847.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:00:47.132Z,1538776847.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:00:47.133Z,1538776847.133 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:00:47.137Z,1538776847.137 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:00:47.138Z,1538776847.138 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:01:07.637Z,1538776867.637 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T22:01:07.637Z,1538776867.637 [Default:CheckIn:C.Wait] Stopped
2018-10-05T22:01:07.637Z,1538776867.637 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T22:01:07.637Z,1538776867.637 [Default:CheckIn:D] Running Loop=1
2018-10-05T22:01:08.037Z,1538776868.037 [Default:CheckIn:D] Stopped
2018-10-05T22:01:08.037Z,1538776868.037 [Default:CheckIn:E] Running Loop=1
2018-10-05T22:01:08.410Z,1538776868.410 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2504.671094 min 
2018-10-05T22:01:08.410Z,1538776868.410 [Default:CheckIn:E] Stopped
2018-10-05T22:01:08.410Z,1538776868.410 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T22:01:08.411Z,1538776868.411 [Default:CheckIn] Stopped
2018-10-05T22:01:08.411Z,1538776868.411 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T22:01:08.411Z,1538776868.411 [Default:CheckIn](INFO): Running loop #243
2018-10-05T22:01:08.411Z,1538776868.411 [Default:CheckIn] Running Loop=243
2018-10-05T22:01:08.411Z,1538776868.411 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T22:01:08.411Z,1538776868.411 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T22:03:49.369Z,1538777029.369 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:03:49.369Z,1538777029.369 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2018-10-05T22:03:49.369Z,1538777029.369 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:03:49.371Z,1538777029.371 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:03:49.371Z,1538777029.371 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2018-10-05T22:03:49.371Z,1538777029.371 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:03:49.384Z,1538777029.384 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:03:49.401Z,1538777029.401 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:03:49.515Z,1538777029.515 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:03:49.515Z,1538777029.515 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2018-10-05T22:03:49.516Z,1538777029.516 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:03:49.516Z,1538777029.516 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2018-10-05T22:03:49.866Z,1538777029.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:03:49.866Z,1538777029.866 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:03:49.867Z,1538777029.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:03:49.867Z,1538777029.867 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:03:49.867Z,1538777029.867 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:03:49.868Z,1538777029.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:05:01.309Z,1538777101.309 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T22:06:10.706Z,1538777170.706 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T22:01:08.4Z
2018-10-05T22:06:10.706Z,1538777170.706 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T22:06:10.706Z,1538777170.706 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T22:06:15.628Z,1538777175.628 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0730.lzma
2018-10-05T22:06:16.406Z,1538777176.406 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0730.lzma.bak
2018-10-05T22:06:16.407Z,1538777176.407 [DataOverHttps](INFO): SBD MOMSN=8612011
2018-10-05T22:06:32.325Z,1538777192.325 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0731.lzma
2018-10-05T22:06:33.108Z,1538777193.108 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0731.lzma.bak
2018-10-05T22:06:33.108Z,1538777193.108 [DataOverHttps](INFO): SBD MOMSN=8612013
2018-10-05T22:06:34.742Z,1538777194.742 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T22:06:34.742Z,1538777194.742 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T22:06:34.742Z,1538777194.742 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T22:06:50.180Z,1538777210.180 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:06:50.180Z,1538777210.180 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2018-10-05T22:06:50.180Z,1538777210.180 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:06:50.182Z,1538777210.182 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:06:50.183Z,1538777210.183 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2018-10-05T22:06:50.183Z,1538777210.183 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:06:50.196Z,1538777210.196 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:06:50.196Z,1538777210.196 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:06:50.589Z,1538777210.589 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:06:50.589Z,1538777210.589 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2018-10-05T22:06:50.590Z,1538777210.590 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:06:50.590Z,1538777210.590 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2018-10-05T22:06:50.961Z,1538777210.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:06:50.961Z,1538777210.961 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:06:50.961Z,1538777210.961 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:06:50.962Z,1538777210.962 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:06:50.963Z,1538777210.963 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:06:50.963Z,1538777210.963 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:08:40.503Z,1538777320.503 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T22:08:40.503Z,1538777320.503 [NAL9602] Data Fault, FailCount= 3
2018-10-05T22:08:40.503Z,1538777320.503 [NAL9602](ERROR): Data Fault
2018-10-05T22:08:40.568Z,1538777320.568 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T22:08:40.899Z,1538777320.899 [NAL9602](INFO): Powering down
2018-10-05T22:08:41.764Z,1538777321.764 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T22:08:41.764Z,1538777321.764 [NAL9602] No Fault, FailCount= 3
2018-10-05T22:09:11.003Z,1538777351.003 [NAL9602](INFO): Powering up NAL9602
2018-10-05T22:09:21.803Z,1538777361.803 [NAL9602](INFO): NAL9602 initialized
2018-10-05T22:09:51.159Z,1538777391.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:09:51.159Z,1538777391.159 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2018-10-05T22:09:51.159Z,1538777391.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:09:51.166Z,1538777391.166 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:09:51.166Z,1538777391.166 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2018-10-05T22:09:51.166Z,1538777391.166 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:09:51.207Z,1538777391.207 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:09:51.207Z,1538777391.207 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:09:51.596Z,1538777391.596 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:09:51.596Z,1538777391.596 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2018-10-05T22:09:51.596Z,1538777391.596 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:09:51.596Z,1538777391.596 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2018-10-05T22:09:51.962Z,1538777391.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:09:51.962Z,1538777391.962 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:09:51.963Z,1538777391.963 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:09:51.963Z,1538777391.963 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:09:51.964Z,1538777391.964 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:09:51.964Z,1538777391.964 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:10:21.617Z,1538777421.617 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.880,*-0.004,*0.000
2018-10-05T22:11:35.284Z,1538777495.284 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T22:11:35.285Z,1538777495.285 [Default:CheckIn:C.Wait] Stopped
2018-10-05T22:11:35.285Z,1538777495.285 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T22:11:35.285Z,1538777495.285 [Default:CheckIn:D] Running Loop=1
2018-10-05T22:11:35.685Z,1538777495.685 [Default:CheckIn:D] Stopped
2018-10-05T22:11:35.685Z,1538777495.685 [Default:CheckIn:E] Running Loop=1
2018-10-05T22:11:36.093Z,1538777496.093 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2515.132031 min 
2018-10-05T22:11:36.093Z,1538777496.093 [Default:CheckIn:E] Stopped
2018-10-05T22:11:36.093Z,1538777496.093 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T22:11:36.094Z,1538777496.094 [Default:CheckIn] Stopped
2018-10-05T22:11:36.094Z,1538777496.094 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T22:11:36.094Z,1538777496.094 [Default:CheckIn](INFO): Running loop #244
2018-10-05T22:11:36.094Z,1538777496.094 [Default:CheckIn] Running Loop=244
2018-10-05T22:11:36.094Z,1538777496.094 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T22:11:36.094Z,1538777496.094 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T22:12:52.222Z,1538777572.222 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:12:52.222Z,1538777572.222 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2018-10-05T22:12:52.222Z,1538777572.222 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:12:52.224Z,1538777572.224 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:12:52.224Z,1538777572.224 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2018-10-05T22:12:52.224Z,1538777572.224 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:12:52.249Z,1538777572.249 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:12:52.250Z,1538777572.250 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:12:52.616Z,1538777572.616 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:12:52.616Z,1538777572.616 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2018-10-05T22:12:52.621Z,1538777572.621 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:12:52.621Z,1538777572.621 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2018-10-05T22:12:53.008Z,1538777573.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:12:53.008Z,1538777573.008 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:12:53.009Z,1538777573.009 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:12:53.021Z,1538777573.021 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:12:53.021Z,1538777573.021 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:12:53.022Z,1538777573.022 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:15:10.188Z,1538777710.188 [CBIT](IMPORTANT): Beginning ground fault scan
2018-10-05T22:15:20.988Z,1538777720.988 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134489
CHAN A1 (24V): 0.003036
CHAN A2 (12V): -0.007618
CHAN A3 (5V): -0.002025
CHAN B0 (3.3V): 0.000072
CHAN B1 (3.15aV): 0.000355
CHAN B2 (3.15bV): 0.000151
CHAN B3 (GND): 0.002421
OPEN: 0.005080
Full Scale Calc: 4.765 mA, -1.589 mA
2018-10-05T22:15:53.075Z,1538777753.075 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:15:53.075Z,1538777753.075 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2018-10-05T22:15:53.075Z,1538777753.075 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:15:53.077Z,1538777753.077 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:15:53.077Z,1538777753.077 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2018-10-05T22:15:53.077Z,1538777753.077 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:15:53.091Z,1538777753.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:15:53.091Z,1538777753.091 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:15:53.091Z,1538777753.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:15:53.092Z,1538777753.092 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:16:38.863Z,1538777798.863 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T22:11:36.1Z
2018-10-05T22:16:38.863Z,1538777798.863 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T22:16:38.863Z,1538777798.863 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T22:16:43.882Z,1538777803.882 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0733.lzma
2018-10-05T22:16:44.647Z,1538777804.647 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0733.lzma.bak
2018-10-05T22:16:44.648Z,1538777804.648 [DataOverHttps](INFO): SBD MOMSN=8612015
2018-10-05T22:16:50.182Z,1538777810.182 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.873, -0.004, 0.000
2018-10-05T22:16:53.892Z,1538777813.892 [DataOverHttps](INFO): Sending 401 bytes from file Logs/20181004T041305/Express0734.lzma
2018-10-05T22:16:54.638Z,1538777814.638 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0734.lzma.bak
2018-10-05T22:16:54.638Z,1538777814.638 [DataOverHttps](INFO): SBD MOMSN=8612017
2018-10-05T22:16:55.590Z,1538777815.590 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T22:16:55.590Z,1538777815.590 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T22:16:55.590Z,1538777815.590 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T22:19:24.683Z,1538777964.683 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T22:19:24.683Z,1538777964.683 [NAL9602] Data Fault, FailCount= 4
2018-10-05T22:19:24.683Z,1538777964.683 [NAL9602](ERROR): Data Fault
2018-10-05T22:19:24.748Z,1538777964.748 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T22:19:25.083Z,1538777965.083 [NAL9602](INFO): Powering down
2018-10-05T22:19:25.962Z,1538777965.962 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T22:19:25.962Z,1538777965.962 [NAL9602] No Fault, FailCount= 4
2018-10-05T22:19:55.227Z,1538777995.227 [NAL9602](INFO): Powering up NAL9602
2018-10-05T22:20:06.395Z,1538778006.395 [NAL9602](INFO): NAL9602 initialized
2018-10-05T22:21:55.953Z,1538778115.953 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T22:21:55.953Z,1538778115.953 [Default:CheckIn:C.Wait] Stopped
2018-10-05T22:21:55.953Z,1538778115.953 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T22:21:55.953Z,1538778115.953 [Default:CheckIn:D] Running Loop=1
2018-10-05T22:21:56.319Z,1538778116.319 [Default:CheckIn:D] Stopped
2018-10-05T22:21:56.319Z,1538778116.319 [Default:CheckIn:E] Running Loop=1
2018-10-05T22:21:56.727Z,1538778116.727 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2525.475781 min 
2018-10-05T22:21:56.728Z,1538778116.728 [Default:CheckIn:E] Stopped
2018-10-05T22:21:56.728Z,1538778116.728 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T22:21:56.728Z,1538778116.728 [Default:CheckIn] Stopped
2018-10-05T22:21:56.728Z,1538778116.728 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T22:21:56.728Z,1538778116.728 [Default:CheckIn](INFO): Running loop #245
2018-10-05T22:21:56.728Z,1538778116.728 [Default:CheckIn] Running Loop=245
2018-10-05T22:21:56.728Z,1538778116.728 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T22:21:56.729Z,1538778116.729 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T22:25:22.586Z,1538778322.586 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T22:25:22.586Z,1538778322.586 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100515302083,35.0, -0.1,   0.,  0
2018-10-05T22:26:19.066Z,1538778379.066 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T22:26:19.066Z,1538778379.066 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +000
2018-10-05T22:26:45.044Z,1538778405.044 [RDI_Pathfinder](ERROR): Failed to parse::SA,   +0.00,   +0.00,  0.00
2018-10-05T22:26:58.698Z,1538778418.698 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T22:21:56.7Z
2018-10-05T22:26:58.698Z,1538778418.698 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T22:26:58.698Z,1538778418.698 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T22:27:09.570Z,1538778429.570 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0736.lzma
2018-10-05T22:27:10.355Z,1538778430.355 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0736.lzma.bak
2018-10-05T22:27:10.355Z,1538778430.355 [DataOverHttps](INFO): SBD MOMSN=8612019
2018-10-05T22:27:19.581Z,1538778439.581 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0737.lzma
2018-10-05T22:27:20.339Z,1538778440.339 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0737.lzma.bak
2018-10-05T22:27:20.339Z,1538778440.339 [DataOverHttps](INFO): SBD MOMSN=8612021
2018-10-05T22:27:21.464Z,1538778441.464 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T22:27:21.464Z,1538778441.464 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T22:27:21.464Z,1538778441.464 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T22:30:09.931Z,1538778609.931 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T22:30:09.931Z,1538778609.931 [NAL9602] Data Fault, FailCount= 5
2018-10-05T22:30:09.931Z,1538778609.931 [NAL9602](ERROR): Data Fault
2018-10-05T22:30:10.033Z,1538778610.033 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T22:30:10.034Z,1538778610.034 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T22:30:10.335Z,1538778610.335 [NAL9602](INFO): Powering down
2018-10-05T22:30:10.404Z,1538778610.404 [CBIT](INFO): Critical error at 20181005T223010
2018-10-05T22:30:53.262Z,1538778653.262 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:30:53.262Z,1538778653.262 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2018-10-05T22:30:53.263Z,1538778653.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:30:53.263Z,1538778653.263 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2018-10-05T22:30:53.642Z,1538778653.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:30:53.642Z,1538778653.642 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:30:53.643Z,1538778653.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:30:53.643Z,1538778653.643 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:30:53.643Z,1538778653.643 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:30:53.644Z,1538778653.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:30:58.087Z,1538778658.087 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T22:32:10.303Z,1538778730.303 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T22:32:10.304Z,1538778730.304 [NAL9602] No Fault, FailCount= 5
2018-10-05T22:32:10.627Z,1538778730.627 [NAL9602](INFO): Powering up NAL9602
2018-10-05T22:32:21.439Z,1538778741.439 [NAL9602](INFO): NAL9602 initialized
2018-10-05T22:32:21.870Z,1538778741.870 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T22:32:21.870Z,1538778741.870 [Default:CheckIn:C.Wait] Stopped
2018-10-05T22:32:21.870Z,1538778741.870 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T22:32:21.870Z,1538778741.870 [Default:CheckIn:D] Running Loop=1
2018-10-05T22:32:22.279Z,1538778742.279 [Default:CheckIn:D] Stopped
2018-10-05T22:32:22.279Z,1538778742.279 [Default:CheckIn:E] Running Loop=1
2018-10-05T22:32:22.673Z,1538778742.673 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2535.908594 min 
2018-10-05T22:32:22.674Z,1538778742.674 [Default:CheckIn:E] Stopped
2018-10-05T22:32:22.674Z,1538778742.674 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T22:32:22.674Z,1538778742.674 [Default:CheckIn] Stopped
2018-10-05T22:32:22.674Z,1538778742.674 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T22:32:22.674Z,1538778742.674 [Default:CheckIn](INFO): Running loop #246
2018-10-05T22:32:22.674Z,1538778742.674 [Default:CheckIn] Running Loop=246
2018-10-05T22:32:22.675Z,1538778742.675 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T22:32:22.675Z,1538778742.675 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T22:32:51.197Z,1538778771.197 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-05T22:32:51.197Z,1538778771.197 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.0  +0.00,   0.00,55814.88
2018-10-05T22:33:53.809Z,1538778833.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:33:53.810Z,1538778833.810 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-10-05T22:33:53.810Z,1538778833.810 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:33:53.834Z,1538778833.834 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:33:53.834Z,1538778833.834 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-05T22:33:53.834Z,1538778833.834 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:33:53.866Z,1538778833.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:33:53.866Z,1538778833.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:33:54.236Z,1538778834.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:33:54.236Z,1538778834.236 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-10-05T22:33:54.241Z,1538778834.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:33:54.241Z,1538778834.241 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-05T22:33:54.614Z,1538778834.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:33:54.614Z,1538778834.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:33:54.614Z,1538778834.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:33:54.615Z,1538778834.615 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:33:54.615Z,1538778834.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:33:54.616Z,1538778834.616 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:36:54.635Z,1538779014.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:36:54.635Z,1538779014.635 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-10-05T22:36:54.635Z,1538779014.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:36:54.637Z,1538779014.637 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:36:54.638Z,1538779014.638 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-05T22:36:54.638Z,1538779014.638 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:36:54.667Z,1538779014.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:36:54.667Z,1538779014.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:36:55.090Z,1538779015.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:36:55.090Z,1538779015.090 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-10-05T22:36:55.091Z,1538779015.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:36:55.091Z,1538779015.091 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-05T22:36:55.442Z,1538779015.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:36:55.442Z,1538779015.442 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:36:55.443Z,1538779015.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:36:55.443Z,1538779015.443 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:36:55.443Z,1538779015.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:36:55.444Z,1538779015.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:37:25.064Z,1538779045.064 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T22:32:22.7Z
2018-10-05T22:37:25.064Z,1538779045.064 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T22:37:25.064Z,1538779045.064 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T22:37:30.043Z,1538779050.043 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0739.lzma
2018-10-05T22:37:30.827Z,1538779050.827 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0739.lzma.bak
2018-10-05T22:37:30.827Z,1538779050.827 [DataOverHttps](INFO): SBD MOMSN=8612023
2018-10-05T22:37:40.701Z,1538779060.701 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0740.lzma
2018-10-05T22:37:41.483Z,1538779061.483 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0740.lzma.bak
2018-10-05T22:37:41.483Z,1538779061.483 [DataOverHttps](INFO): SBD MOMSN=8612025
2018-10-05T22:37:42.464Z,1538779062.464 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T22:37:42.465Z,1538779062.465 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T22:37:42.465Z,1538779062.465 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T22:39:55.602Z,1538779195.602 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:39:55.602Z,1538779195.602 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-10-05T22:39:55.602Z,1538779195.602 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:39:55.604Z,1538779195.604 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:39:55.604Z,1538779195.604 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-05T22:39:55.604Z,1538779195.604 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:39:55.634Z,1538779195.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:39:55.634Z,1538779195.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:39:56.024Z,1538779196.024 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:39:56.024Z,1538779196.024 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-10-05T22:39:56.029Z,1538779196.029 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:39:56.029Z,1538779196.029 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-05T22:39:56.390Z,1538779196.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:39:56.390Z,1538779196.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:39:56.391Z,1538779196.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:39:56.391Z,1538779196.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:39:56.392Z,1538779196.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:39:56.392Z,1538779196.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:42:22.495Z,1538779342.495 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T22:42:22.495Z,1538779342.495 [NAL9602] Data Fault, FailCount= 1
2018-10-05T22:42:22.495Z,1538779342.495 [NAL9602](ERROR): Data Fault
2018-10-05T22:42:22.594Z,1538779342.594 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T22:42:22.891Z,1538779342.891 [NAL9602](INFO): Powering down
2018-10-05T22:42:23.764Z,1538779343.764 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T22:42:23.764Z,1538779343.764 [NAL9602] No Fault, FailCount= 1
2018-10-05T22:42:42.657Z,1538779362.657 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T22:42:42.658Z,1538779362.658 [Default:CheckIn:C.Wait] Stopped
2018-10-05T22:42:42.658Z,1538779362.658 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T22:42:42.658Z,1538779362.658 [Default:CheckIn:D] Running Loop=1
2018-10-05T22:42:43.076Z,1538779363.076 [Default:CheckIn:D] Stopped
2018-10-05T22:42:43.076Z,1538779363.076 [Default:CheckIn:E] Running Loop=1
2018-10-05T22:42:43.466Z,1538779363.466 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2546.255208 min 
2018-10-05T22:42:43.467Z,1538779363.467 [Default:CheckIn:E] Stopped
2018-10-05T22:42:43.467Z,1538779363.467 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T22:42:43.467Z,1538779363.467 [Default:CheckIn] Stopped
2018-10-05T22:42:43.467Z,1538779363.467 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T22:42:43.467Z,1538779363.467 [Default:CheckIn](INFO): Running loop #247
2018-10-05T22:42:43.467Z,1538779363.467 [Default:CheckIn] Running Loop=247
2018-10-05T22:42:43.467Z,1538779363.467 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T22:42:43.468Z,1538779363.468 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T22:42:53.020Z,1538779373.020 [NAL9602](INFO): Powering up NAL9602
2018-10-05T22:42:56.655Z,1538779376.655 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:42:56.655Z,1538779376.655 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-10-05T22:42:56.656Z,1538779376.656 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:42:56.657Z,1538779376.657 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:42:56.658Z,1538779376.658 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-05T22:42:56.658Z,1538779376.658 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:42:56.677Z,1538779376.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:42:56.678Z,1538779376.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:42:57.080Z,1538779377.080 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:42:57.080Z,1538779377.080 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-10-05T22:42:57.081Z,1538779377.081 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:42:57.081Z,1538779377.081 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-05T22:42:57.458Z,1538779377.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:42:57.459Z,1538779377.459 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:42:57.459Z,1538779377.459 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:42:57.460Z,1538779377.460 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:42:57.460Z,1538779377.460 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:42:57.460Z,1538779377.460 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:43:03.903Z,1538779383.903 [NAL9602](INFO): NAL9602 initialized
2018-10-05T22:45:59.924Z,1538779559.924 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:45:59.925Z,1538779559.925 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-10-05T22:45:59.925Z,1538779559.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:45:59.927Z,1538779559.927 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:45:59.927Z,1538779559.927 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-05T22:45:59.927Z,1538779559.927 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:45:59.994Z,1538779559.994 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:45:59.994Z,1538779559.994 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:46:00.123Z,1538779560.123 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:46:00.123Z,1538779560.123 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-10-05T22:46:00.123Z,1538779560.123 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:46:00.123Z,1538779560.123 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-05T22:46:00.468Z,1538779560.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:46:00.468Z,1538779560.468 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:46:00.469Z,1538779560.469 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:46:00.469Z,1538779560.469 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:46:00.470Z,1538779560.470 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:46:00.470Z,1538779560.470 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:47:45.947Z,1538779665.947 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T22:42:43.5Z
2018-10-05T22:47:45.947Z,1538779665.947 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T22:47:45.947Z,1538779665.947 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T22:47:50.864Z,1538779670.864 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0742.lzma
2018-10-05T22:47:51.647Z,1538779671.647 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0742.lzma.bak
2018-10-05T22:47:51.647Z,1538779671.647 [DataOverHttps](INFO): SBD MOMSN=8612027
2018-10-05T22:48:00.875Z,1538779680.875 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0743.lzma
2018-10-05T22:48:01.644Z,1538779681.644 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0743.lzma.bak
2018-10-05T22:48:01.645Z,1538779681.645 [DataOverHttps](INFO): SBD MOMSN=8612029
2018-10-05T22:48:02.632Z,1538779682.632 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T22:48:02.632Z,1538779682.632 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T22:48:02.632Z,1538779682.632 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T22:49:00.579Z,1538779740.579 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:49:00.579Z,1538779740.579 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-10-05T22:49:00.579Z,1538779740.579 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:49:00.585Z,1538779740.585 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:49:00.585Z,1538779740.585 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-05T22:49:00.585Z,1538779740.585 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:49:00.604Z,1538779740.604 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:49:00.604Z,1538779740.604 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:49:00.974Z,1538779740.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:49:00.974Z,1538779740.974 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-10-05T22:49:00.975Z,1538779740.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:49:00.975Z,1538779740.975 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-05T22:49:01.366Z,1538779741.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:49:01.366Z,1538779741.366 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:49:01.367Z,1538779741.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:49:01.367Z,1538779741.367 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:49:01.368Z,1538779741.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:49:01.368Z,1538779741.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:52:01.472Z,1538779921.472 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:52:01.472Z,1538779921.472 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-10-05T22:52:01.472Z,1538779921.472 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:52:01.474Z,1538779921.474 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:52:01.474Z,1538779921.474 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-05T22:52:01.474Z,1538779921.474 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:52:01.511Z,1538779921.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:52:01.512Z,1538779921.512 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:52:01.867Z,1538779921.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:52:01.867Z,1538779921.867 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-10-05T22:52:01.868Z,1538779921.868 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:52:01.868Z,1538779921.868 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-05T22:52:02.269Z,1538779922.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:52:02.270Z,1538779922.270 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:52:02.270Z,1538779922.270 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:52:02.270Z,1538779922.270 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:52:02.271Z,1538779922.271 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:52:02.271Z,1538779922.271 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:53:02.883Z,1538779982.883 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T22:53:02.884Z,1538779982.884 [Default:CheckIn:C.Wait] Stopped
2018-10-05T22:53:02.884Z,1538779982.884 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T22:53:02.884Z,1538779982.884 [Default:CheckIn:D] Running Loop=1
2018-10-05T22:53:03.247Z,1538779983.247 [Default:CheckIn:D] Stopped
2018-10-05T22:53:03.247Z,1538779983.247 [Default:CheckIn:E] Running Loop=1
2018-10-05T22:53:03.685Z,1538779983.685 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2556.591406 min 
2018-10-05T22:53:03.685Z,1538779983.685 [Default:CheckIn:E] Stopped
2018-10-05T22:53:03.686Z,1538779983.686 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T22:53:03.686Z,1538779983.686 [Default:CheckIn] Stopped
2018-10-05T22:53:03.686Z,1538779983.686 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T22:53:03.686Z,1538779983.686 [Default:CheckIn](INFO): Running loop #248
2018-10-05T22:53:03.686Z,1538779983.686 [Default:CheckIn] Running Loop=248
2018-10-05T22:53:03.686Z,1538779983.686 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T22:53:03.686Z,1538779983.686 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T22:53:06.823Z,1538779986.823 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T22:53:06.823Z,1538779986.823 [NAL9602] Data Fault, FailCount= 2
2018-10-05T22:53:06.823Z,1538779986.823 [NAL9602](ERROR): Data Fault
2018-10-05T22:53:06.911Z,1538779986.911 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T22:53:07.219Z,1538779987.219 [NAL9602](INFO): Powering down
2018-10-05T22:53:08.101Z,1538779988.101 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T22:53:08.101Z,1538779988.101 [NAL9602] No Fault, FailCount= 2
2018-10-05T22:53:37.327Z,1538780017.327 [NAL9602](INFO): Powering up NAL9602
2018-10-05T22:53:48.528Z,1538780028.528 [NAL9602](INFO): NAL9602 initialized
2018-10-05T22:55:02.371Z,1538780102.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:55:02.371Z,1538780102.371 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-10-05T22:55:02.371Z,1538780102.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:55:02.373Z,1538780102.373 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:55:02.373Z,1538780102.373 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-05T22:55:02.373Z,1538780102.373 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:55:02.396Z,1538780102.396 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:55:02.396Z,1538780102.396 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:55:02.777Z,1538780102.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:55:02.777Z,1538780102.777 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-10-05T22:55:02.777Z,1538780102.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:55:02.778Z,1538780102.778 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-05T22:55:03.168Z,1538780103.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:55:03.168Z,1538780103.168 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:55:03.173Z,1538780103.173 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:55:03.174Z,1538780103.174 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:55:03.174Z,1538780103.174 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:55:03.174Z,1538780103.174 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:58:05.888Z,1538780285.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:58:05.888Z,1538780285.888 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-10-05T22:58:05.888Z,1538780285.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T22:58:05.890Z,1538780285.890 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T22:58:05.890Z,1538780285.890 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-05T22:58:05.890Z,1538780285.890 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T22:58:05.893Z,1538780285.893 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T22:53:03.7Z
2018-10-05T22:58:05.893Z,1538780285.893 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T22:58:05.893Z,1538780285.893 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T22:58:05.904Z,1538780285.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T22:58:05.905Z,1538780285.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T22:58:06.026Z,1538780286.026 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T22:58:06.026Z,1538780286.026 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-10-05T22:58:06.027Z,1538780286.027 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T22:58:06.027Z,1538780286.027 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-05T22:58:06.640Z,1538780286.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T22:58:06.641Z,1538780286.641 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:58:06.641Z,1538780286.641 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:58:06.642Z,1538780286.642 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T22:58:06.642Z,1538780286.642 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T22:58:06.642Z,1538780286.642 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T22:58:10.903Z,1538780290.903 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0745.lzma
2018-10-05T22:58:11.691Z,1538780291.691 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0745.lzma.bak
2018-10-05T22:58:11.691Z,1538780291.691 [DataOverHttps](INFO): SBD MOMSN=8612031
2018-10-05T22:58:20.970Z,1538780300.970 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0746.lzma
2018-10-05T22:58:21.750Z,1538780301.750 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0746.lzma.bak
2018-10-05T22:58:21.751Z,1538780301.751 [DataOverHttps](INFO): SBD MOMSN=8612033
2018-10-05T22:58:22.740Z,1538780302.740 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T22:58:22.740Z,1538780302.740 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T22:58:22.741Z,1538780302.741 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T23:00:59.550Z,1538780459.550 [BPC1](ERROR): BPC1B failed to parse battery data due to unrecognized msg size.
2018-10-05T23:01:06.674Z,1538780466.674 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:01:06.674Z,1538780466.674 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-10-05T23:01:06.674Z,1538780466.674 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:01:06.676Z,1538780466.676 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:01:06.676Z,1538780466.676 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-05T23:01:06.676Z,1538780466.676 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:01:06.690Z,1538780466.690 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:01:06.690Z,1538780466.690 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:01:07.128Z,1538780467.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:01:07.128Z,1538780467.128 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-10-05T23:01:07.128Z,1538780467.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:01:07.128Z,1538780467.128 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-05T23:01:07.474Z,1538780467.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:01:07.474Z,1538780467.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:01:07.475Z,1538780467.475 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:01:07.475Z,1538780467.475 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:01:07.475Z,1538780467.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:01:07.476Z,1538780467.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:01:24.832Z,1538780484.832 [RDI_Pathfinder](ERROR): Failed to parse:
:BE,-32768,-32768,-32768,V
2018-10-05T23:03:23.222Z,1538780603.222 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T23:03:23.222Z,1538780603.222 [Default:CheckIn:C.Wait] Stopped
2018-10-05T23:03:23.222Z,1538780603.222 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T23:03:23.222Z,1538780603.222 [Default:CheckIn:D] Running Loop=1
2018-10-05T23:03:23.633Z,1538780603.633 [Default:CheckIn:D] Stopped
2018-10-05T23:03:23.633Z,1538780603.633 [Default:CheckIn:E] Running Loop=1
2018-10-05T23:03:24.029Z,1538780604.029 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2566.930990 min 
2018-10-05T23:03:24.029Z,1538780604.029 [Default:CheckIn:E] Stopped
2018-10-05T23:03:24.030Z,1538780604.030 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T23:03:24.030Z,1538780604.030 [Default:CheckIn] Stopped
2018-10-05T23:03:24.030Z,1538780604.030 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T23:03:24.030Z,1538780604.030 [Default:CheckIn](INFO): Running loop #249
2018-10-05T23:03:24.030Z,1538780604.030 [Default:CheckIn] Running Loop=249
2018-10-05T23:03:24.030Z,1538780604.030 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T23:03:24.030Z,1538780604.030 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T23:03:32.840Z,1538780612.840 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-05T23:03:51.655Z,1538780631.655 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T23:03:51.655Z,1538780631.655 [NAL9602] Data Fault, FailCount= 3
2018-10-05T23:03:51.655Z,1538780631.655 [NAL9602](ERROR): Data Fault
2018-10-05T23:03:51.740Z,1538780631.740 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T23:03:52.055Z,1538780632.055 [NAL9602](INFO): Powering down
2018-10-05T23:03:52.935Z,1538780632.935 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T23:03:52.935Z,1538780632.935 [NAL9602] No Fault, FailCount= 3
2018-10-05T23:04:07.694Z,1538780647.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:04:07.695Z,1538780647.695 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-10-05T23:04:07.695Z,1538780647.695 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:04:07.696Z,1538780647.696 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:04:07.697Z,1538780647.697 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-05T23:04:07.697Z,1538780647.697 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:04:07.710Z,1538780647.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:04:07.710Z,1538780647.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:04:08.119Z,1538780648.119 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:04:08.119Z,1538780648.119 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-10-05T23:04:08.120Z,1538780648.120 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:04:08.120Z,1538780648.120 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-05T23:04:08.497Z,1538780648.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:04:08.498Z,1538780648.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:04:08.498Z,1538780648.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:04:08.499Z,1538780648.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:04:08.499Z,1538780648.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:04:08.499Z,1538780648.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:04:22.163Z,1538780662.163 [NAL9602](INFO): Powering up NAL9602
2018-10-05T23:04:33.363Z,1538780673.363 [NAL9602](INFO): NAL9602 initialized
2018-10-05T23:07:08.635Z,1538780828.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:07:08.635Z,1538780828.635 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-10-05T23:07:08.635Z,1538780828.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:07:08.641Z,1538780828.641 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:07:08.641Z,1538780828.641 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-05T23:07:08.641Z,1538780828.641 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:07:08.671Z,1538780828.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:07:08.671Z,1538780828.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:07:09.085Z,1538780829.085 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:07:09.085Z,1538780829.085 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-10-05T23:07:09.085Z,1538780829.085 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:07:09.086Z,1538780829.086 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-05T23:07:09.446Z,1538780829.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:07:09.446Z,1538780829.446 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:07:09.447Z,1538780829.447 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:07:09.447Z,1538780829.447 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:07:09.447Z,1538780829.447 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:07:09.448Z,1538780829.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:08:26.013Z,1538780906.013 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T23:03:24.0Z
2018-10-05T23:08:26.013Z,1538780906.013 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T23:08:26.013Z,1538780906.013 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T23:08:30.947Z,1538780910.947 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0748.lzma
2018-10-05T23:08:31.718Z,1538780911.718 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0748.lzma.bak
2018-10-05T23:08:31.718Z,1538780911.718 [DataOverHttps](INFO): SBD MOMSN=8612035
2018-10-05T23:08:40.915Z,1538780920.915 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0749.lzma
2018-10-05T23:08:41.684Z,1538780921.684 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0749.lzma.bak
2018-10-05T23:08:41.685Z,1538780921.685 [DataOverHttps](INFO): SBD MOMSN=8612037
2018-10-05T23:08:42.669Z,1538780922.669 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T23:08:42.669Z,1538780922.669 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T23:08:42.669Z,1538780922.669 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T23:10:09.785Z,1538781009.785 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:10:09.785Z,1538781009.785 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-10-05T23:10:09.785Z,1538781009.785 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:10:09.787Z,1538781009.787 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:10:09.787Z,1538781009.787 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-05T23:10:09.787Z,1538781009.787 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:10:09.817Z,1538781009.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:10:09.817Z,1538781009.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:10:10.221Z,1538781010.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:10:10.221Z,1538781010.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-10-05T23:10:10.221Z,1538781010.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:10:10.222Z,1538781010.222 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-05T23:10:10.588Z,1538781010.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:10:10.589Z,1538781010.589 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:10:10.589Z,1538781010.589 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:10:10.590Z,1538781010.590 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:10:10.590Z,1538781010.590 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:10:10.590Z,1538781010.590 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:13:10.751Z,1538781190.751 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:13:10.751Z,1538781190.751 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-10-05T23:13:10.751Z,1538781190.751 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:13:10.753Z,1538781190.753 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:13:10.753Z,1538781190.753 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-05T23:13:10.753Z,1538781190.753 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:13:10.790Z,1538781190.790 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:13:10.791Z,1538781190.791 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:13:11.167Z,1538781191.167 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:13:11.167Z,1538781191.167 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-10-05T23:13:11.168Z,1538781191.168 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:13:11.168Z,1538781191.168 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-05T23:13:11.539Z,1538781191.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:13:11.539Z,1538781191.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:13:11.540Z,1538781191.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:13:11.540Z,1538781191.540 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:13:11.545Z,1538781191.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:13:11.545Z,1538781191.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:13:42.816Z,1538781222.816 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T23:13:42.821Z,1538781222.821 [Default:CheckIn:C.Wait] Stopped
2018-10-05T23:13:42.821Z,1538781222.821 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T23:13:42.821Z,1538781222.821 [Default:CheckIn:D] Running Loop=1
2018-10-05T23:13:43.227Z,1538781223.227 [Default:CheckIn:D] Stopped
2018-10-05T23:13:43.227Z,1538781223.227 [Default:CheckIn:E] Running Loop=1
2018-10-05T23:13:43.599Z,1538781223.599 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2577.257552 min 
2018-10-05T23:13:43.600Z,1538781223.600 [Default:CheckIn:E] Stopped
2018-10-05T23:13:43.600Z,1538781223.600 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T23:13:43.600Z,1538781223.600 [Default:CheckIn] Stopped
2018-10-05T23:13:43.600Z,1538781223.600 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T23:13:43.600Z,1538781223.600 [Default:CheckIn](INFO): Running loop #250
2018-10-05T23:13:43.600Z,1538781223.600 [Default:CheckIn] Running Loop=250
2018-10-05T23:13:43.600Z,1538781223.600 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T23:13:43.600Z,1538781223.600 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T23:14:34.483Z,1538781274.483 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T23:14:34.483Z,1538781274.483 [NAL9602] Data Fault, FailCount= 4
2018-10-05T23:14:34.483Z,1538781274.483 [NAL9602](ERROR): Data Fault
2018-10-05T23:14:34.570Z,1538781274.570 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T23:14:34.891Z,1538781274.891 [NAL9602](INFO): Powering down
2018-10-05T23:14:35.786Z,1538781275.786 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T23:14:35.786Z,1538781275.786 [NAL9602] No Fault, FailCount= 4
2018-10-05T23:15:04.971Z,1538781304.971 [NAL9602](INFO): Powering up NAL9602
2018-10-05T23:15:15.848Z,1538781315.848 [NAL9602](INFO): NAL9602 initialized
2018-10-05T23:16:11.567Z,1538781371.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:16:11.567Z,1538781371.567 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-10-05T23:16:11.567Z,1538781371.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:16:11.569Z,1538781371.569 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:16:11.569Z,1538781371.569 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-05T23:16:11.569Z,1538781371.569 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:16:11.582Z,1538781371.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:16:11.583Z,1538781371.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:16:11.998Z,1538781371.998 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:16:11.998Z,1538781371.998 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-10-05T23:16:11.999Z,1538781371.999 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:16:11.999Z,1538781371.999 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-05T23:16:12.390Z,1538781372.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:16:12.390Z,1538781372.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:16:12.391Z,1538781372.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:16:12.391Z,1538781372.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:16:12.391Z,1538781372.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:16:12.392Z,1538781372.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:17:37.060Z,1538781457.060 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-05T23:18:46.363Z,1538781526.363 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T23:13:43.6Z
2018-10-05T23:18:46.363Z,1538781526.363 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T23:18:46.363Z,1538781526.363 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T23:18:51.328Z,1538781531.328 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0751.lzma
2018-10-05T23:18:52.131Z,1538781532.131 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0751.lzma.bak
2018-10-05T23:18:52.131Z,1538781532.131 [DataOverHttps](INFO): SBD MOMSN=8612039
2018-10-05T23:19:01.331Z,1538781541.331 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181004T041305/Express0752.lzma
2018-10-05T23:19:02.104Z,1538781542.104 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0752.lzma.bak
2018-10-05T23:19:02.104Z,1538781542.104 [DataOverHttps](INFO): SBD MOMSN=8612041
2018-10-05T23:19:03.078Z,1538781543.078 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T23:19:03.078Z,1538781543.078 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T23:19:03.078Z,1538781543.078 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T23:19:12.583Z,1538781552.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:19:12.583Z,1538781552.583 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-10-05T23:19:12.583Z,1538781552.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:19:12.585Z,1538781552.585 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:19:12.585Z,1538781552.585 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-05T23:19:12.585Z,1538781552.585 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:19:12.599Z,1538781552.599 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:19:12.599Z,1538781552.599 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:19:13.002Z,1538781553.002 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:19:13.002Z,1538781553.002 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-10-05T23:19:13.002Z,1538781553.002 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:19:13.002Z,1538781553.002 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-05T23:19:13.379Z,1538781553.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:19:13.379Z,1538781553.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:19:13.379Z,1538781553.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:19:13.380Z,1538781553.380 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:19:13.380Z,1538781553.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:19:13.381Z,1538781553.381 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:19:17.798Z,1538781557.798 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.880, 0.001, 65.535
2018-10-05T23:22:13.431Z,1538781733.431 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:22:13.431Z,1538781733.431 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-10-05T23:22:13.431Z,1538781733.431 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:22:13.437Z,1538781733.437 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:22:13.437Z,1538781733.437 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-05T23:22:13.437Z,1538781733.437 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:22:13.459Z,1538781733.459 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:22:13.459Z,1538781733.459 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:22:13.879Z,1538781733.879 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:22:13.879Z,1538781733.879 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-10-05T23:22:13.879Z,1538781733.879 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:22:13.880Z,1538781733.880 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-05T23:22:14.235Z,1538781734.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:22:14.235Z,1538781734.235 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:22:14.235Z,1538781734.235 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:22:14.236Z,1538781734.236 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:22:14.236Z,1538781734.236 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:22:14.237Z,1538781734.237 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:24:03.374Z,1538781843.374 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T23:24:03.374Z,1538781843.374 [Default:CheckIn:C.Wait] Stopped
2018-10-05T23:24:03.374Z,1538781843.374 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T23:24:03.374Z,1538781843.374 [Default:CheckIn:D] Running Loop=1
2018-10-05T23:24:03.809Z,1538781843.809 [Default:CheckIn:D] Stopped
2018-10-05T23:24:03.809Z,1538781843.809 [Default:CheckIn:E] Running Loop=1
2018-10-05T23:24:04.144Z,1538781844.144 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2587.600521 min 
2018-10-05T23:24:04.144Z,1538781844.144 [Default:CheckIn:E] Stopped
2018-10-05T23:24:04.144Z,1538781844.144 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T23:24:04.145Z,1538781844.145 [Default:CheckIn] Stopped
2018-10-05T23:24:04.145Z,1538781844.145 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T23:24:04.145Z,1538781844.145 [Default:CheckIn](INFO): Running loop #251
2018-10-05T23:24:04.145Z,1538781844.145 [Default:CheckIn] Running Loop=251
2018-10-05T23:24:04.145Z,1538781844.145 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T23:24:04.145Z,1538781844.145 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T23:25:14.347Z,1538781914.347 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:25:14.347Z,1538781914.347 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-10-05T23:25:14.347Z,1538781914.347 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:25:14.365Z,1538781914.365 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:25:14.365Z,1538781914.365 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-05T23:25:14.365Z,1538781914.365 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:25:14.387Z,1538781914.387 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:25:14.387Z,1538781914.387 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:25:14.786Z,1538781914.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:25:14.787Z,1538781914.787 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-10-05T23:25:14.787Z,1538781914.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:25:14.787Z,1538781914.787 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-05T23:25:15.164Z,1538781915.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:25:15.165Z,1538781915.165 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:25:15.165Z,1538781915.165 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:25:15.165Z,1538781915.165 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:25:15.166Z,1538781915.166 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:25:15.166Z,1538781915.166 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:25:18.711Z,1538781918.711 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T23:25:18.711Z,1538781918.711 [NAL9602] Data Fault, FailCount= 5
2018-10-05T23:25:18.711Z,1538781918.711 [NAL9602](ERROR): Data Fault
2018-10-05T23:25:18.789Z,1538781918.789 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T23:25:18.790Z,1538781918.790 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-05T23:25:19.111Z,1538781919.111 [NAL9602](INFO): Powering down
2018-10-05T23:25:19.203Z,1538781919.203 [CBIT](INFO): Critical error at 20181005T232518
2018-10-05T23:27:20.218Z,1538782040.218 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T23:27:20.219Z,1538782040.219 [NAL9602] No Fault, FailCount= 5
2018-10-05T23:27:20.287Z,1538782040.287 [NAL9602](INFO): Powering up NAL9602
2018-10-05T23:27:31.435Z,1538782051.435 [NAL9602](INFO): NAL9602 initialized
2018-10-05T23:28:03.175Z,1538782083.175 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T23:28:03.175Z,1538782083.175 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100516330183,35.0, -0.1,   0.0,10
2018-10-05T23:28:15.182Z,1538782095.182 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:28:15.182Z,1538782095.182 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-10-05T23:28:15.182Z,1538782095.182 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:28:15.184Z,1538782095.184 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:28:15.184Z,1538782095.184 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-05T23:28:15.184Z,1538782095.184 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:28:15.205Z,1538782095.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:28:15.206Z,1538782095.206 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:28:15.586Z,1538782095.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:28:15.586Z,1538782095.586 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-10-05T23:28:15.586Z,1538782095.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:28:15.587Z,1538782095.587 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-05T23:28:15.970Z,1538782095.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:28:15.970Z,1538782095.970 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:28:15.971Z,1538782095.971 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:28:15.971Z,1538782095.971 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:28:15.972Z,1538782095.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:28:15.972Z,1538782095.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:29:06.059Z,1538782146.059 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T23:24:04.1Z
2018-10-05T23:29:06.060Z,1538782146.060 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T23:29:06.060Z,1538782146.060 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T23:29:10.983Z,1538782150.983 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0754.lzma
2018-10-05T23:29:11.755Z,1538782151.755 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0754.lzma.bak
2018-10-05T23:29:11.755Z,1538782151.755 [DataOverHttps](INFO): SBD MOMSN=8612043
2018-10-05T23:29:20.958Z,1538782160.958 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0755.lzma
2018-10-05T23:29:21.734Z,1538782161.734 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0755.lzma.bak
2018-10-05T23:29:21.735Z,1538782161.735 [DataOverHttps](INFO): SBD MOMSN=8612045
2018-10-05T23:29:22.706Z,1538782162.706 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T23:29:22.706Z,1538782162.706 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T23:29:22.706Z,1538782162.706 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T23:30:52.477Z,1538782252.477 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-05T23:30:52.477Z,1538782252.477 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100516355083,35.0, -0.1,   0.0,1448.9I,-32768,-32768,-32768,-32768,V
2018-10-05T23:31:16.159Z,1538782276.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:31:16.159Z,1538782276.159 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-10-05T23:31:16.159Z,1538782276.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:31:16.165Z,1538782276.165 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:31:16.166Z,1538782276.166 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-05T23:31:16.166Z,1538782276.166 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:31:16.187Z,1538782276.187 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:31:16.187Z,1538782276.187 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:31:16.567Z,1538782276.567 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:31:16.567Z,1538782276.567 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-10-05T23:31:16.568Z,1538782276.568 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:31:16.568Z,1538782276.568 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-05T23:31:16.983Z,1538782276.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:31:16.983Z,1538782276.983 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:31:16.984Z,1538782276.984 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:31:16.984Z,1538782276.984 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:31:16.985Z,1538782276.985 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:31:16.985Z,1538782276.985 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:34:17.052Z,1538782457.052 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:34:17.052Z,1538782457.052 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-10-05T23:34:17.052Z,1538782457.052 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:34:17.058Z,1538782457.058 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:34:17.059Z,1538782457.059 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-10-05T23:34:17.059Z,1538782457.059 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:34:17.080Z,1538782457.080 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:34:17.080Z,1538782457.080 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:34:17.464Z,1538782457.464 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:34:17.464Z,1538782457.464 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-10-05T23:34:17.465Z,1538782457.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:34:17.465Z,1538782457.465 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-10-05T23:34:17.845Z,1538782457.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:34:17.846Z,1538782457.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:34:17.846Z,1538782457.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:34:17.846Z,1538782457.846 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:34:17.847Z,1538782457.847 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:34:17.847Z,1538782457.847 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:34:23.072Z,1538782463.072 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T23:34:23.077Z,1538782463.077 [Default:CheckIn:C.Wait] Stopped
2018-10-05T23:34:23.077Z,1538782463.077 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T23:34:23.077Z,1538782463.077 [Default:CheckIn:D] Running Loop=1
2018-10-05T23:34:23.448Z,1538782463.448 [Default:CheckIn:D] Stopped
2018-10-05T23:34:23.448Z,1538782463.448 [Default:CheckIn:E] Running Loop=1
2018-10-05T23:34:23.853Z,1538782463.853 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2597.928125 min 
2018-10-05T23:34:23.853Z,1538782463.853 [Default:CheckIn:E] Stopped
2018-10-05T23:34:23.854Z,1538782463.854 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T23:34:23.854Z,1538782463.854 [Default:CheckIn] Stopped
2018-10-05T23:34:23.854Z,1538782463.854 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T23:34:23.854Z,1538782463.854 [Default:CheckIn](INFO): Running loop #252
2018-10-05T23:34:23.854Z,1538782463.854 [Default:CheckIn] Running Loop=252
2018-10-05T23:34:23.854Z,1538782463.854 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T23:34:23.854Z,1538782463.854 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T23:35:20.079Z,1538782520.079 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T23:37:18.132Z,1538782638.132 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:37:18.132Z,1538782638.132 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-10-05T23:37:18.132Z,1538782638.132 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:37:18.134Z,1538782638.134 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:37:18.134Z,1538782638.134 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-10-05T23:37:18.134Z,1538782638.134 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:37:18.148Z,1538782638.148 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:37:18.148Z,1538782638.148 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:37:18.539Z,1538782638.539 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:37:18.539Z,1538782638.539 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-10-05T23:37:18.540Z,1538782638.540 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:37:18.540Z,1538782638.540 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-10-05T23:37:18.930Z,1538782638.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:37:18.931Z,1538782638.931 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:37:18.931Z,1538782638.931 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:37:18.931Z,1538782638.931 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:37:18.932Z,1538782638.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:37:18.932Z,1538782638.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:37:34.488Z,1538782654.488 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T23:37:34.488Z,1538782654.488 [NAL9602] Data Fault, FailCount= 1
2018-10-05T23:37:34.488Z,1538782654.488 [NAL9602](ERROR): Data Fault
2018-10-05T23:37:34.543Z,1538782654.543 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T23:37:34.883Z,1538782654.883 [NAL9602](INFO): Powering down
2018-10-05T23:37:35.763Z,1538782655.763 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T23:37:35.763Z,1538782655.763 [NAL9602] No Fault, FailCount= 1
2018-10-05T23:38:04.943Z,1538782684.943 [NAL9602](INFO): Powering up NAL9602
2018-10-05T23:38:15.876Z,1538782695.876 [NAL9602](INFO): NAL9602 initialized
2018-10-05T23:39:26.016Z,1538782766.016 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T23:34:23.9Z
2018-10-05T23:39:26.017Z,1538782766.017 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T23:39:26.017Z,1538782766.017 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T23:39:30.962Z,1538782770.962 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0757.lzma
2018-10-05T23:39:31.739Z,1538782771.739 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0757.lzma.bak
2018-10-05T23:39:31.739Z,1538782771.739 [DataOverHttps](INFO): SBD MOMSN=8612047
2018-10-05T23:39:36.013Z,1538782776.013 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-05T23:39:40.973Z,1538782780.973 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0758.lzma
2018-10-05T23:39:41.758Z,1538782781.758 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0758.lzma.bak
2018-10-05T23:39:41.759Z,1538782781.759 [DataOverHttps](INFO): SBD MOMSN=8612049
2018-10-05T23:39:42.777Z,1538782782.777 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T23:39:42.777Z,1538782782.777 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T23:39:42.777Z,1538782782.777 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T23:39:46.027Z,1538782786.027 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,59811.21
2018-10-05T23:40:19.318Z,1538782819.318 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:40:19.318Z,1538782819.318 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-10-05T23:40:19.318Z,1538782819.318 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:40:19.320Z,1538782819.320 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:40:19.320Z,1538782819.320 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-10-05T23:40:19.320Z,1538782819.320 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:40:19.333Z,1538782819.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:40:19.334Z,1538782819.334 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:40:22.521Z,1538782822.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:40:22.522Z,1538782822.522 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-10-05T23:40:22.522Z,1538782822.522 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:40:22.522Z,1538782822.522 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-10-05T23:40:22.643Z,1538782822.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:40:22.644Z,1538782822.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:40:22.644Z,1538782822.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:40:22.645Z,1538782822.645 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:40:22.657Z,1538782822.657 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:40:22.657Z,1538782822.657 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:43:23.014Z,1538783003.014 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:43:23.015Z,1538783003.015 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-10-05T23:43:23.015Z,1538783003.015 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:43:23.016Z,1538783003.016 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:43:23.017Z,1538783003.017 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-10-05T23:43:23.017Z,1538783003.017 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:43:23.030Z,1538783003.030 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:43:23.030Z,1538783003.030 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:43:23.434Z,1538783003.434 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:43:23.434Z,1538783003.434 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-10-05T23:43:23.435Z,1538783003.435 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:43:23.435Z,1538783003.435 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-10-05T23:43:23.827Z,1538783003.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:43:23.828Z,1538783003.828 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:43:23.828Z,1538783003.828 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:43:23.828Z,1538783003.828 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:43:23.829Z,1538783003.829 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:43:23.829Z,1538783003.829 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:44:43.224Z,1538783083.224 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T23:44:43.225Z,1538783083.225 [Default:CheckIn:C.Wait] Stopped
2018-10-05T23:44:43.225Z,1538783083.225 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T23:44:43.225Z,1538783083.225 [Default:CheckIn:D] Running Loop=1
2018-10-05T23:44:43.588Z,1538783083.588 [Default:CheckIn:D] Stopped
2018-10-05T23:44:43.588Z,1538783083.588 [Default:CheckIn:E] Running Loop=1
2018-10-05T23:44:44.018Z,1538783084.018 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2608.263542 min 
2018-10-05T23:44:44.018Z,1538783084.018 [Default:CheckIn:E] Stopped
2018-10-05T23:44:44.018Z,1538783084.018 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T23:44:44.018Z,1538783084.018 [Default:CheckIn] Stopped
2018-10-05T23:44:44.018Z,1538783084.018 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T23:44:44.018Z,1538783084.018 [Default:CheckIn](INFO): Running loop #253
2018-10-05T23:44:44.019Z,1538783084.019 [Default:CheckIn] Running Loop=253
2018-10-05T23:44:44.019Z,1538783084.019 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T23:44:44.019Z,1538783084.019 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T23:46:23.900Z,1538783183.900 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:46:23.900Z,1538783183.900 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-10-05T23:46:23.900Z,1538783183.900 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:46:23.902Z,1538783183.902 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:46:23.902Z,1538783183.902 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-10-05T23:46:23.902Z,1538783183.902 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:46:23.948Z,1538783183.948 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:46:23.949Z,1538783183.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:46:24.307Z,1538783184.307 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:46:24.307Z,1538783184.307 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-10-05T23:46:24.308Z,1538783184.308 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:46:24.308Z,1538783184.308 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-10-05T23:46:24.682Z,1538783184.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:46:24.682Z,1538783184.682 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:46:24.683Z,1538783184.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:46:24.683Z,1538783184.683 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:46:24.684Z,1538783184.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:46:24.684Z,1538783184.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:48:18.577Z,1538783298.577 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T23:48:18.577Z,1538783298.577 [NAL9602] Data Fault, FailCount= 2
2018-10-05T23:48:18.577Z,1538783298.577 [NAL9602](ERROR): Data Fault
2018-10-05T23:48:18.640Z,1538783298.640 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T23:48:18.975Z,1538783298.975 [NAL9602](INFO): Powering down
2018-10-05T23:48:19.832Z,1538783299.832 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T23:48:19.832Z,1538783299.832 [NAL9602] No Fault, FailCount= 2
2018-10-05T23:48:49.071Z,1538783329.071 [NAL9602](INFO): Powering up NAL9602
2018-10-05T23:48:59.890Z,1538783339.890 [NAL9602](INFO): NAL9602 initialized
2018-10-05T23:49:24.804Z,1538783364.804 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:49:24.805Z,1538783364.805 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-10-05T23:49:24.805Z,1538783364.805 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:49:24.807Z,1538783364.807 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:49:24.807Z,1538783364.807 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-10-05T23:49:24.807Z,1538783364.807 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:49:24.833Z,1538783364.833 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:49:24.841Z,1538783364.841 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:49:25.202Z,1538783365.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:49:25.202Z,1538783365.202 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-10-05T23:49:25.203Z,1538783365.203 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:49:25.203Z,1538783365.203 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-10-05T23:49:25.570Z,1538783365.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:49:25.570Z,1538783365.570 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:49:25.571Z,1538783365.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:49:25.571Z,1538783365.571 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:49:25.571Z,1538783365.571 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:49:25.572Z,1538783365.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:49:46.379Z,1538783386.379 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T23:44:44.0Z
2018-10-05T23:49:46.379Z,1538783386.379 [Default:CheckIn:Read_GPS] Stopped
2018-10-05T23:49:46.379Z,1538783386.379 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-05T23:49:51.332Z,1538783391.332 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0760.lzma
2018-10-05T23:49:52.115Z,1538783392.115 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0760.lzma.bak
2018-10-05T23:49:52.115Z,1538783392.115 [DataOverHttps](INFO): SBD MOMSN=8612051
2018-10-05T23:50:01.344Z,1538783401.344 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0761.lzma
2018-10-05T23:50:02.131Z,1538783402.131 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0761.lzma.bak
2018-10-05T23:50:02.131Z,1538783402.131 [DataOverHttps](INFO): SBD MOMSN=8612053
2018-10-05T23:50:03.139Z,1538783403.139 [Default:CheckIn:Read_Iridium] Stopped
2018-10-05T23:50:03.139Z,1538783403.139 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-05T23:50:03.139Z,1538783403.139 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-05T23:52:27.185Z,1538783547.185 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:52:27.185Z,1538783547.185 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-10-05T23:52:27.186Z,1538783547.186 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:52:27.187Z,1538783547.187 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:52:27.187Z,1538783547.187 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-10-05T23:52:27.188Z,1538783547.188 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:52:27.200Z,1538783547.200 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:52:27.201Z,1538783547.201 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:52:27.334Z,1538783547.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:52:27.334Z,1538783547.334 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-10-05T23:52:27.335Z,1538783547.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:52:27.335Z,1538783547.335 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-10-05T23:52:27.650Z,1538783547.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:52:27.650Z,1538783547.650 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:52:27.651Z,1538783547.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:52:27.651Z,1538783547.651 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:52:27.651Z,1538783547.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:52:27.652Z,1538783547.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:53:39.051Z,1538783619.051 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-05T23:55:03.646Z,1538783703.646 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-05T23:55:03.646Z,1538783703.646 [Default:CheckIn:C.Wait] Stopped
2018-10-05T23:55:03.646Z,1538783703.646 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-05T23:55:03.646Z,1538783703.646 [Default:CheckIn:D] Running Loop=1
2018-10-05T23:55:04.040Z,1538783704.040 [Default:CheckIn:D] Stopped
2018-10-05T23:55:04.040Z,1538783704.040 [Default:CheckIn:E] Running Loop=1
2018-10-05T23:55:04.449Z,1538783704.449 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2618.604427 min 
2018-10-05T23:55:04.449Z,1538783704.449 [Default:CheckIn:E] Stopped
2018-10-05T23:55:04.449Z,1538783704.449 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-05T23:55:04.449Z,1538783704.450 [Default:CheckIn] Stopped
2018-10-05T23:55:04.450Z,1538783704.450 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-05T23:55:04.450Z,1538783704.450 [Default:CheckIn](INFO): Running loop #254
2018-10-05T23:55:04.450Z,1538783704.450 [Default:CheckIn] Running Loop=254
2018-10-05T23:55:04.450Z,1538783704.450 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-05T23:55:04.450Z,1538783704.450 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-05T23:55:27.751Z,1538783727.751 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:55:27.751Z,1538783727.751 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-10-05T23:55:27.751Z,1538783727.751 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:55:27.753Z,1538783727.753 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:55:27.753Z,1538783727.753 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-10-05T23:55:27.753Z,1538783727.753 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:55:27.785Z,1538783727.785 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:55:27.786Z,1538783727.786 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:55:28.158Z,1538783728.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:55:28.158Z,1538783728.158 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-10-05T23:55:28.158Z,1538783728.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:55:28.158Z,1538783728.158 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-10-05T23:55:28.534Z,1538783728.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:55:28.535Z,1538783728.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:55:28.535Z,1538783728.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:55:28.536Z,1538783728.536 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:55:28.536Z,1538783728.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:55:28.537Z,1538783728.537 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:58:28.814Z,1538783908.814 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:58:28.815Z,1538783908.815 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-10-05T23:58:28.815Z,1538783908.815 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-05T23:58:28.816Z,1538783908.816 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-05T23:58:28.825Z,1538783908.825 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-10-05T23:58:28.825Z,1538783908.825 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-05T23:58:28.850Z,1538783908.850 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-05T23:58:28.851Z,1538783908.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-05T23:58:29.190Z,1538783909.190 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-05T23:58:29.190Z,1538783909.190 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-10-05T23:58:29.191Z,1538783909.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-05T23:58:29.191Z,1538783909.191 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-10-05T23:58:29.578Z,1538783909.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-05T23:58:29.578Z,1538783909.578 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:58:29.579Z,1538783909.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:58:29.579Z,1538783909.579 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-05T23:58:29.579Z,1538783909.579 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-05T23:58:29.580Z,1538783909.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-05T23:59:01.639Z,1538783941.639 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-05T23:59:01.639Z,1538783941.639 [NAL9602] Data Fault, FailCount= 3
2018-10-05T23:59:01.639Z,1538783941.639 [NAL9602](ERROR): Data Fault
2018-10-05T23:59:01.712Z,1538783941.712 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-05T23:59:02.041Z,1538783942.041 [NAL9602](INFO): Powering down
2018-10-05T23:59:02.923Z,1538783942.923 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-05T23:59:02.923Z,1538783942.923 [NAL9602] No Fault, FailCount= 3
2018-10-05T23:59:32.119Z,1538783972.119 [NAL9602](INFO): Powering up NAL9602
2018-10-05T23:59:43.319Z,1538783983.319 [NAL9602](INFO): NAL9602 initialized
2018-10-06T00:00:05.783Z,1538784005.783 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-05T23:55:04.5Z
2018-10-06T00:00:05.783Z,1538784005.783 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T00:00:05.783Z,1538784005.783 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T00:00:10.722Z,1538784010.722 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0763.lzma
2018-10-06T00:00:11.507Z,1538784011.507 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0763.lzma.bak
2018-10-06T00:00:11.507Z,1538784011.507 [DataOverHttps](INFO): SBD MOMSN=8612055
2018-10-06T00:00:20.749Z,1538784020.749 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0764.lzma
2018-10-06T00:00:21.514Z,1538784021.514 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0764.lzma.bak
2018-10-06T00:00:21.515Z,1538784021.515 [DataOverHttps](INFO): SBD MOMSN=8612057
2018-10-06T00:00:22.499Z,1538784022.499 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T00:00:22.499Z,1538784022.499 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T00:00:22.499Z,1538784022.499 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T00:01:29.579Z,1538784089.579 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:01:29.579Z,1538784089.579 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-10-06T00:01:29.579Z,1538784089.579 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:01:29.597Z,1538784089.597 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:01:29.597Z,1538784089.597 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-10-06T00:01:29.598Z,1538784089.598 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:01:29.627Z,1538784089.627 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:01:29.628Z,1538784089.628 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:01:30.066Z,1538784090.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:01:30.066Z,1538784090.066 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-10-06T00:01:30.067Z,1538784090.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:01:30.067Z,1538784090.067 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-10-06T00:01:30.410Z,1538784090.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:01:30.410Z,1538784090.410 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:01:30.411Z,1538784090.411 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:01:30.411Z,1538784090.411 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:01:30.412Z,1538784090.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:01:30.412Z,1538784090.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:04:32.926Z,1538784272.926 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:04:32.926Z,1538784272.926 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-10-06T00:04:32.926Z,1538784272.926 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:04:32.928Z,1538784272.928 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:04:32.928Z,1538784272.928 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-10-06T00:04:32.928Z,1538784272.928 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:04:32.941Z,1538784272.941 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:04:32.942Z,1538784272.942 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:04:33.086Z,1538784273.086 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:04:33.089Z,1538784273.089 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-10-06T00:04:33.089Z,1538784273.089 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:04:33.090Z,1538784273.090 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-10-06T00:04:33.394Z,1538784273.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:04:33.394Z,1538784273.394 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:04:33.395Z,1538784273.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:04:33.395Z,1538784273.395 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:04:33.395Z,1538784273.395 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:04:33.396Z,1538784273.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:05:22.918Z,1538784322.918 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T00:05:22.919Z,1538784322.919 [Default:CheckIn:C.Wait] Stopped
2018-10-06T00:05:22.919Z,1538784322.919 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T00:05:22.919Z,1538784322.919 [Default:CheckIn:D] Running Loop=1
2018-10-06T00:05:23.284Z,1538784323.284 [Default:CheckIn:D] Stopped
2018-10-06T00:05:23.284Z,1538784323.284 [Default:CheckIn:E] Running Loop=1
2018-10-06T00:05:23.703Z,1538784323.703 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2628.925260 min 
2018-10-06T00:05:23.703Z,1538784323.703 [Default:CheckIn:E] Stopped
2018-10-06T00:05:23.703Z,1538784323.703 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T00:05:23.703Z,1538784323.703 [Default:CheckIn] Stopped
2018-10-06T00:05:23.704Z,1538784323.704 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T00:05:23.704Z,1538784323.704 [Default:CheckIn](INFO): Running loop #255
2018-10-06T00:05:23.705Z,1538784323.705 [Default:CheckIn] Running Loop=255
2018-10-06T00:05:23.705Z,1538784323.705 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T00:05:23.705Z,1538784323.705 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T00:07:33.715Z,1538784453.715 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:07:33.715Z,1538784453.715 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-10-06T00:07:33.715Z,1538784453.715 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:07:33.717Z,1538784453.717 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:07:33.717Z,1538784453.717 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-10-06T00:07:33.717Z,1538784453.717 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:07:33.745Z,1538784453.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:07:33.745Z,1538784453.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:07:34.129Z,1538784454.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:07:34.129Z,1538784454.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-10-06T00:07:34.130Z,1538784454.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:07:34.130Z,1538784454.130 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-10-06T00:07:34.490Z,1538784454.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:07:34.491Z,1538784454.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:07:34.491Z,1538784454.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:07:34.492Z,1538784454.492 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:07:34.492Z,1538784454.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:07:34.492Z,1538784454.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:09:44.487Z,1538784584.487 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T00:09:44.487Z,1538784584.487 [NAL9602] Data Fault, FailCount= 4
2018-10-06T00:09:44.487Z,1538784584.487 [NAL9602](ERROR): Data Fault
2018-10-06T00:09:44.576Z,1538784584.576 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T00:09:44.887Z,1538784584.887 [NAL9602](INFO): Powering down
2018-10-06T00:09:45.789Z,1538784585.789 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T00:09:45.789Z,1538784585.789 [NAL9602] No Fault, FailCount= 4
2018-10-06T00:10:14.967Z,1538784614.967 [NAL9602](INFO): Powering up NAL9602
2018-10-06T00:10:25.908Z,1538784625.908 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T00:05:23.7Z
2018-10-06T00:10:25.909Z,1538784625.909 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T00:10:25.929Z,1538784625.929 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T00:10:26.655Z,1538784626.655 [NAL9602](INFO): NAL9602 initialized
2018-10-06T00:10:30.876Z,1538784630.876 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0766.lzma
2018-10-06T00:10:31.663Z,1538784631.663 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0766.lzma.bak
2018-10-06T00:10:31.663Z,1538784631.663 [DataOverHttps](INFO): SBD MOMSN=8612059
2018-10-06T00:10:36.017Z,1538784636.017 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:10:36.017Z,1538784636.017 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-10-06T00:10:36.018Z,1538784636.018 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:10:36.019Z,1538784636.019 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:10:36.019Z,1538784636.019 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-10-06T00:10:36.020Z,1538784636.020 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:10:36.033Z,1538784636.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:10:36.033Z,1538784636.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:10:36.190Z,1538784636.190 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:10:36.190Z,1538784636.190 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-10-06T00:10:36.191Z,1538784636.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:10:36.191Z,1538784636.191 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-10-06T00:10:36.522Z,1538784636.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:10:36.522Z,1538784636.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:10:36.523Z,1538784636.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:10:36.523Z,1538784636.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:10:36.523Z,1538784636.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:10:36.524Z,1538784636.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:10:41.045Z,1538784641.045 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0767.lzma
2018-10-06T00:10:41.818Z,1538784641.818 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0767.lzma.bak
2018-10-06T00:10:41.818Z,1538784641.818 [DataOverHttps](INFO): SBD MOMSN=8612061
2018-10-06T00:10:42.846Z,1538784642.846 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T00:10:42.846Z,1538784642.846 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T00:10:42.846Z,1538784642.846 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T00:11:01.860Z,1538784661.860 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-06T00:11:25.022Z,1538784685.022 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-06T00:13:36.548Z,1538784816.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:13:36.548Z,1538784816.548 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-10-06T00:13:36.548Z,1538784816.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:13:36.554Z,1538784816.554 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:13:36.554Z,1538784816.554 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-10-06T00:13:36.555Z,1538784816.555 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:13:36.583Z,1538784816.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:13:36.584Z,1538784816.584 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:13:36.984Z,1538784816.984 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:13:36.984Z,1538784816.984 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-10-06T00:13:36.989Z,1538784816.989 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:13:36.989Z,1538784816.989 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-10-06T00:13:37.338Z,1538784817.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:13:37.338Z,1538784817.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:13:37.339Z,1538784817.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:13:37.339Z,1538784817.339 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:13:37.339Z,1538784817.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:13:37.340Z,1538784817.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:15:42.994Z,1538784942.994 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T00:15:42.994Z,1538784942.994 [Default:CheckIn:C.Wait] Stopped
2018-10-06T00:15:42.994Z,1538784942.994 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T00:15:42.994Z,1538784942.994 [Default:CheckIn:D] Running Loop=1
2018-10-06T00:15:43.391Z,1538784943.391 [Default:CheckIn:D] Stopped
2018-10-06T00:15:43.391Z,1538784943.391 [Default:CheckIn:E] Running Loop=1
2018-10-06T00:15:43.785Z,1538784943.785 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2639.260417 min 
2018-10-06T00:15:43.785Z,1538784943.785 [Default:CheckIn:E] Stopped
2018-10-06T00:15:43.785Z,1538784943.785 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T00:15:43.785Z,1538784943.785 [Default:CheckIn] Stopped
2018-10-06T00:15:43.786Z,1538784943.786 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T00:15:43.786Z,1538784943.786 [Default:CheckIn](INFO): Running loop #256
2018-10-06T00:15:43.786Z,1538784943.786 [Default:CheckIn] Running Loop=256
2018-10-06T00:15:43.786Z,1538784943.786 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T00:15:43.786Z,1538784943.786 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T00:15:44.956Z,1538784944.956 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.894, -0.004, 0.000
2018-10-06T00:16:39.233Z,1538784999.233 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:16:39.233Z,1538784999.233 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-10-06T00:16:39.233Z,1538784999.233 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:16:39.235Z,1538784999.235 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:16:39.236Z,1538784999.236 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-10-06T00:16:39.236Z,1538784999.236 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:16:39.333Z,1538784999.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:16:39.333Z,1538784999.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:16:39.450Z,1538784999.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:16:39.450Z,1538784999.450 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-10-06T00:16:39.450Z,1538784999.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:16:39.450Z,1538784999.450 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-10-06T00:16:39.812Z,1538784999.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:16:39.813Z,1538784999.813 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:16:39.813Z,1538784999.813 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:16:39.814Z,1538784999.814 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:16:39.814Z,1538784999.814 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:16:39.814Z,1538784999.814 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:19:39.893Z,1538785179.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:19:39.893Z,1538785179.893 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-10-06T00:19:39.893Z,1538785179.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:19:39.895Z,1538785179.895 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:19:39.895Z,1538785179.895 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-10-06T00:19:39.895Z,1538785179.895 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:19:39.908Z,1538785179.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:19:39.909Z,1538785179.909 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:19:40.263Z,1538785180.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:19:40.263Z,1538785180.263 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-10-06T00:19:40.263Z,1538785180.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:19:40.264Z,1538785180.264 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-10-06T00:19:40.680Z,1538785180.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:19:40.680Z,1538785180.680 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:19:40.681Z,1538785180.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:19:40.681Z,1538785180.681 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:19:40.682Z,1538785180.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:19:40.682Z,1538785180.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:20:27.495Z,1538785227.495 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T00:20:27.495Z,1538785227.495 [NAL9602] Data Fault, FailCount= 5
2018-10-06T00:20:27.495Z,1538785227.495 [NAL9602](ERROR): Data Fault
2018-10-06T00:20:27.562Z,1538785227.562 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T00:20:27.563Z,1538785227.563 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-06T00:20:27.891Z,1538785227.891 [NAL9602](INFO): Powering down
2018-10-06T00:20:27.969Z,1538785227.969 [CBIT](INFO): Critical error at 20181006T002027
2018-10-06T00:20:45.933Z,1538785245.933 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T00:15:43.8Z
2018-10-06T00:20:45.933Z,1538785245.933 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T00:20:45.933Z,1538785245.933 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T00:20:50.851Z,1538785250.851 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20181004T041305/Courier0769.lzma
2018-10-06T00:20:51.626Z,1538785251.626 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0769.lzma.bak
2018-10-06T00:20:51.627Z,1538785251.627 [DataOverHttps](INFO): SBD MOMSN=8612063
2018-10-06T00:21:00.816Z,1538785260.816 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0770.lzma
2018-10-06T00:21:01.599Z,1538785261.599 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0770.lzma.bak
2018-10-06T00:21:01.599Z,1538785261.599 [DataOverHttps](INFO): SBD MOMSN=8612065
2018-10-06T00:21:02.574Z,1538785262.574 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T00:21:02.574Z,1538785262.574 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T00:21:02.574Z,1538785262.574 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T00:22:27.731Z,1538785347.731 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T00:22:27.731Z,1538785347.731 [NAL9602] No Fault, FailCount= 5
2018-10-06T00:22:28.063Z,1538785348.063 [NAL9602](INFO): Powering up NAL9602
2018-10-06T00:22:38.871Z,1538785358.871 [NAL9602](INFO): NAL9602 initialized
2018-10-06T00:22:40.903Z,1538785360.903 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:22:40.903Z,1538785360.903 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-10-06T00:22:40.903Z,1538785360.903 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:22:40.905Z,1538785360.905 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:22:40.905Z,1538785360.905 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-10-06T00:22:40.905Z,1538785360.905 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:22:40.942Z,1538785360.942 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:22:40.943Z,1538785360.943 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:22:41.339Z,1538785361.339 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:22:41.339Z,1538785361.339 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-10-06T00:22:41.340Z,1538785361.340 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:22:41.340Z,1538785361.340 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-10-06T00:22:41.707Z,1538785361.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:22:41.707Z,1538785361.707 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:22:41.708Z,1538785361.708 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:22:41.708Z,1538785361.708 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:22:41.709Z,1538785361.709 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:22:41.709Z,1538785361.709 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:24:03.994Z,1538785443.994 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe, 15.894, -0.000, 0.000
2018-10-06T00:25:41.792Z,1538785541.792 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:25:41.792Z,1538785541.792 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-10-06T00:25:41.792Z,1538785541.792 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:25:41.794Z,1538785541.794 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:25:41.794Z,1538785541.794 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-10-06T00:25:41.794Z,1538785541.794 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:25:41.807Z,1538785541.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:25:41.808Z,1538785541.808 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:25:42.217Z,1538785542.217 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:25:42.217Z,1538785542.217 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-10-06T00:25:42.218Z,1538785542.218 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:25:42.218Z,1538785542.218 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-10-06T00:25:42.570Z,1538785542.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:25:42.571Z,1538785542.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:25:42.571Z,1538785542.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:25:42.571Z,1538785542.571 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:25:42.572Z,1538785542.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:25:42.572Z,1538785542.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:26:03.064Z,1538785563.064 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T00:26:03.064Z,1538785563.064 [Default:CheckIn:C.Wait] Stopped
2018-10-06T00:26:03.064Z,1538785563.064 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T00:26:03.064Z,1538785563.064 [Default:CheckIn:D] Running Loop=1
2018-10-06T00:26:03.467Z,1538785563.467 [Default:CheckIn:D] Stopped
2018-10-06T00:26:03.467Z,1538785563.467 [Default:CheckIn:E] Running Loop=1
2018-10-06T00:26:03.876Z,1538785563.876 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2649.595052 min 
2018-10-06T00:26:03.877Z,1538785563.877 [Default:CheckIn:E] Stopped
2018-10-06T00:26:03.877Z,1538785563.877 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T00:26:03.877Z,1538785563.877 [Default:CheckIn] Stopped
2018-10-06T00:26:03.877Z,1538785563.877 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T00:26:03.877Z,1538785563.877 [Default:CheckIn](INFO): Running loop #257
2018-10-06T00:26:03.878Z,1538785563.878 [Default:CheckIn] Running Loop=257
2018-10-06T00:26:03.878Z,1538785563.878 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T00:26:03.878Z,1538785563.878 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T00:28:44.907Z,1538785724.907 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:28:44.907Z,1538785724.907 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-10-06T00:28:44.907Z,1538785724.907 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:28:44.910Z,1538785724.910 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:28:44.910Z,1538785724.910 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-10-06T00:28:44.910Z,1538785724.910 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:28:44.923Z,1538785724.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:28:44.923Z,1538785724.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:28:45.055Z,1538785725.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:28:45.055Z,1538785725.055 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-10-06T00:28:45.055Z,1538785725.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:28:45.056Z,1538785725.056 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-10-06T00:28:45.382Z,1538785725.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:28:45.382Z,1538785725.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:28:45.383Z,1538785725.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:28:45.383Z,1538785725.383 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:28:45.383Z,1538785725.383 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:28:45.384Z,1538785725.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:31:06.068Z,1538785866.068 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T00:26:03.9Z
2018-10-06T00:31:06.068Z,1538785866.068 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T00:31:06.068Z,1538785866.068 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T00:31:11.052Z,1538785871.052 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0772.lzma
2018-10-06T00:31:11.831Z,1538785871.831 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0772.lzma.bak
2018-10-06T00:31:11.831Z,1538785871.831 [DataOverHttps](INFO): SBD MOMSN=8612067
2018-10-06T00:31:27.125Z,1538785887.125 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20181004T041305/Express0773.lzma
2018-10-06T00:31:27.896Z,1538785887.896 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0773.lzma.bak
2018-10-06T00:31:27.896Z,1538785887.896 [DataOverHttps](INFO): SBD MOMSN=8612069
2018-10-06T00:31:29.642Z,1538785889.642 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T00:31:29.642Z,1538785889.642 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T00:31:29.642Z,1538785889.642 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T00:31:45.506Z,1538785905.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:31:45.507Z,1538785905.507 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-10-06T00:31:45.507Z,1538785905.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:31:45.508Z,1538785905.508 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:31:45.509Z,1538785905.509 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-10-06T00:31:45.509Z,1538785905.509 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:31:45.555Z,1538785905.555 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:31:45.556Z,1538785905.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:31:45.941Z,1538785905.941 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:31:45.941Z,1538785905.941 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-10-06T00:31:45.941Z,1538785905.941 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:31:45.942Z,1538785905.942 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-10-06T00:31:46.293Z,1538785906.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:31:46.294Z,1538785906.294 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:31:46.296Z,1538785906.296 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:31:46.298Z,1538785906.298 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:31:46.299Z,1538785906.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:31:46.299Z,1538785906.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:32:36.043Z,1538785956.043 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-06T00:32:36.043Z,1538785956.043 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100517373483,35.0, -0.1,   09,  0
2018-10-06T00:32:44.108Z,1538785964.108 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T00:32:44.108Z,1538785964.108 [NAL9602] Data Fault, FailCount= 1
2018-10-06T00:32:44.108Z,1538785964.108 [NAL9602](ERROR): Data Fault
2018-10-06T00:32:44.147Z,1538785964.147 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T00:32:44.499Z,1538785964.499 [NAL9602](INFO): Powering down
2018-10-06T00:32:45.359Z,1538785965.359 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T00:32:45.359Z,1538785965.359 [NAL9602] No Fault, FailCount= 1
2018-10-06T00:33:14.895Z,1538785994.895 [NAL9602](INFO): Powering up NAL9602
2018-10-06T00:33:25.823Z,1538786005.823 [NAL9602](INFO): NAL9602 initialized
2018-10-06T00:34:46.459Z,1538786086.459 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:34:46.459Z,1538786086.459 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-10-06T00:34:46.460Z,1538786086.460 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:34:46.462Z,1538786086.462 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:34:46.462Z,1538786086.462 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-10-06T00:34:46.462Z,1538786086.462 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:34:46.487Z,1538786086.487 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:34:46.488Z,1538786086.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:34:46.903Z,1538786086.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:34:46.903Z,1538786086.903 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-10-06T00:34:46.904Z,1538786086.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:34:46.904Z,1538786086.904 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-10-06T00:34:47.263Z,1538786087.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:34:47.263Z,1538786087.263 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:34:47.264Z,1538786087.264 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:34:47.264Z,1538786087.264 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:34:47.265Z,1538786087.265 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:34:47.265Z,1538786087.265 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:36:30.144Z,1538786190.144 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T00:36:30.145Z,1538786190.145 [Default:CheckIn:C.Wait] Stopped
2018-10-06T00:36:30.154Z,1538786190.154 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T00:36:30.154Z,1538786190.154 [Default:CheckIn:D] Running Loop=1
2018-10-06T00:36:30.461Z,1538786190.461 [Default:CheckIn:D] Stopped
2018-10-06T00:36:30.461Z,1538786190.461 [Default:CheckIn:E] Running Loop=1
2018-10-06T00:36:30.870Z,1538786190.870 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2660.044792 min 
2018-10-06T00:36:30.870Z,1538786190.870 [Default:CheckIn:E] Stopped
2018-10-06T00:36:30.870Z,1538786190.870 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T00:36:30.870Z,1538786190.870 [Default:CheckIn] Stopped
2018-10-06T00:36:30.870Z,1538786190.870 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T00:36:30.871Z,1538786190.871 [Default:CheckIn](INFO): Running loop #258
2018-10-06T00:36:30.871Z,1538786190.871 [Default:CheckIn] Running Loop=258
2018-10-06T00:36:30.871Z,1538786190.871 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T00:36:30.871Z,1538786190.871 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T00:37:47.311Z,1538786267.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:37:47.311Z,1538786267.311 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-10-06T00:37:47.311Z,1538786267.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:37:47.318Z,1538786267.318 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:37:47.318Z,1538786267.318 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-10-06T00:37:47.318Z,1538786267.318 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:37:47.344Z,1538786267.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:37:47.344Z,1538786267.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:37:47.744Z,1538786267.744 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:37:47.744Z,1538786267.744 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-10-06T00:37:47.744Z,1538786267.744 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:37:47.745Z,1538786267.745 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-10-06T00:37:48.102Z,1538786268.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:37:48.102Z,1538786268.102 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:37:48.103Z,1538786268.103 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:37:48.103Z,1538786268.103 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:37:48.103Z,1538786268.103 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:37:48.104Z,1538786268.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:40:48.248Z,1538786448.248 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:40:48.248Z,1538786448.248 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-10-06T00:40:48.248Z,1538786448.248 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:40:48.258Z,1538786448.258 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:40:48.258Z,1538786448.258 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-10-06T00:40:48.258Z,1538786448.258 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:40:48.290Z,1538786448.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:40:48.290Z,1538786448.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:40:48.631Z,1538786448.631 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:40:48.631Z,1538786448.631 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-10-06T00:40:48.632Z,1538786448.632 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:40:48.632Z,1538786448.632 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-10-06T00:40:49.028Z,1538786449.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:40:49.028Z,1538786449.028 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:40:49.029Z,1538786449.029 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:40:49.029Z,1538786449.029 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:40:49.030Z,1538786449.030 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:40:49.030Z,1538786449.030 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:41:33.093Z,1538786493.093 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T00:36:30.9Z
2018-10-06T00:41:33.093Z,1538786493.093 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T00:41:33.094Z,1538786493.094 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T00:41:38.163Z,1538786498.163 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0775.lzma
2018-10-06T00:41:38.939Z,1538786498.939 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0775.lzma.bak
2018-10-06T00:41:38.939Z,1538786498.939 [DataOverHttps](INFO): SBD MOMSN=8612071
2018-10-06T00:41:48.314Z,1538786508.314 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0776.lzma
2018-10-06T00:41:56.944Z,1538786516.944 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0776.lzma.bak
2018-10-06T00:41:56.944Z,1538786516.944 [DataOverHttps](INFO): SBD MOMSN=8612073
2018-10-06T00:41:57.719Z,1538786517.719 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T00:41:57.719Z,1538786517.719 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T00:41:57.719Z,1538786517.719 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T00:43:27.606Z,1538786607.606 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T00:43:27.606Z,1538786607.606 [NAL9602] Data Fault, FailCount= 2
2018-10-06T00:43:27.606Z,1538786607.606 [NAL9602](ERROR): Data Fault
2018-10-06T00:43:27.698Z,1538786607.698 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T00:43:28.007Z,1538786608.007 [NAL9602](INFO): Powering down
2018-10-06T00:43:28.883Z,1538786608.883 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T00:43:28.883Z,1538786608.883 [NAL9602] No Fault, FailCount= 2
2018-10-06T00:43:49.371Z,1538786629.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:43:49.371Z,1538786629.371 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-10-06T00:43:49.371Z,1538786629.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:43:49.373Z,1538786629.373 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:43:49.373Z,1538786629.373 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-10-06T00:43:49.373Z,1538786629.373 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:43:49.398Z,1538786629.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:43:49.399Z,1538786629.399 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:43:49.812Z,1538786629.812 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:43:49.812Z,1538786629.812 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-10-06T00:43:49.818Z,1538786629.818 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:43:49.818Z,1538786629.818 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-10-06T00:43:50.201Z,1538786630.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:43:50.202Z,1538786630.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:43:50.202Z,1538786630.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:43:50.203Z,1538786630.203 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:43:50.203Z,1538786630.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:43:50.203Z,1538786630.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:43:58.155Z,1538786638.155 [NAL9602](INFO): Powering up NAL9602
2018-10-06T00:44:09.355Z,1538786649.355 [NAL9602](INFO): NAL9602 initialized
2018-10-06T00:46:50.588Z,1538786810.588 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:46:50.588Z,1538786810.588 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-10-06T00:46:50.588Z,1538786810.588 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:46:50.590Z,1538786810.590 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:46:50.591Z,1538786810.591 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-10-06T00:46:50.591Z,1538786810.591 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:46:50.604Z,1538786810.604 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:46:50.604Z,1538786810.604 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:46:51.016Z,1538786811.016 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:46:51.016Z,1538786811.016 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-10-06T00:46:51.017Z,1538786811.017 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:46:51.017Z,1538786811.017 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-10-06T00:46:51.377Z,1538786811.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:46:51.377Z,1538786811.377 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:46:51.378Z,1538786811.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:46:51.378Z,1538786811.378 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:46:51.378Z,1538786811.378 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:46:51.379Z,1538786811.379 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:46:58.173Z,1538786818.173 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T00:46:58.174Z,1538786818.174 [Default:CheckIn:C.Wait] Stopped
2018-10-06T00:46:58.174Z,1538786818.174 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T00:46:58.174Z,1538786818.174 [Default:CheckIn:D] Running Loop=1
2018-10-06T00:46:58.585Z,1538786818.585 [Default:CheckIn:D] Stopped
2018-10-06T00:46:58.585Z,1538786818.585 [Default:CheckIn:E] Running Loop=1
2018-10-06T00:46:58.993Z,1538786818.993 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2670.513542 min 
2018-10-06T00:46:58.994Z,1538786818.994 [Default:CheckIn:E] Stopped
2018-10-06T00:46:58.994Z,1538786818.994 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T00:46:58.994Z,1538786818.994 [Default:CheckIn] Stopped
2018-10-06T00:46:58.994Z,1538786818.994 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T00:46:58.994Z,1538786818.994 [Default:CheckIn](INFO): Running loop #259
2018-10-06T00:46:58.994Z,1538786818.994 [Default:CheckIn] Running Loop=259
2018-10-06T00:46:58.994Z,1538786818.994 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T00:46:58.995Z,1538786818.995 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T00:49:51.443Z,1538786991.443 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:49:51.443Z,1538786991.443 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-10-06T00:49:51.443Z,1538786991.443 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:49:51.445Z,1538786991.445 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:49:51.445Z,1538786991.445 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-10-06T00:49:51.445Z,1538786991.445 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:49:51.495Z,1538786991.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:49:51.495Z,1538786991.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:49:51.863Z,1538786991.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:49:51.863Z,1538786991.863 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-10-06T00:49:51.863Z,1538786991.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:49:51.863Z,1538786991.863 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-10-06T00:49:52.253Z,1538786992.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:49:52.254Z,1538786992.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:49:52.254Z,1538786992.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:49:52.254Z,1538786992.254 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:49:52.255Z,1538786992.255 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:49:52.255Z,1538786992.255 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:52:00.745Z,1538787120.745 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T00:46:58.0Z
2018-10-06T00:52:00.745Z,1538787120.745 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T00:52:00.745Z,1538787120.745 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T00:52:08.987Z,1538787128.987 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0778.lzma
2018-10-06T00:52:10.426Z,1538787130.426 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0778.lzma.bak
2018-10-06T00:52:10.427Z,1538787130.427 [DataOverHttps](INFO): SBD MOMSN=8612075
2018-10-06T00:52:19.589Z,1538787139.589 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0779.lzma
2018-10-06T00:52:20.371Z,1538787140.371 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0779.lzma.bak
2018-10-06T00:52:20.371Z,1538787140.371 [DataOverHttps](INFO): SBD MOMSN=8612077
2018-10-06T00:52:21.377Z,1538787141.377 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T00:52:21.377Z,1538787141.377 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T00:52:21.377Z,1538787141.377 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T00:52:52.373Z,1538787172.373 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:52:52.373Z,1538787172.373 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-10-06T00:52:52.373Z,1538787172.373 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:52:52.375Z,1538787172.375 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:52:52.375Z,1538787172.375 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-10-06T00:52:52.375Z,1538787172.375 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:52:52.397Z,1538787172.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:52:52.397Z,1538787172.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:52:52.790Z,1538787172.790 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:52:52.790Z,1538787172.790 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-10-06T00:52:52.791Z,1538787172.791 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:52:52.791Z,1538787172.791 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-10-06T00:52:53.163Z,1538787173.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:52:53.164Z,1538787173.164 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:52:53.164Z,1538787173.164 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:52:53.165Z,1538787173.165 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:52:53.165Z,1538787173.165 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:52:53.166Z,1538787173.166 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:54:10.923Z,1538787250.923 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T00:54:10.923Z,1538787250.923 [NAL9602] Data Fault, FailCount= 3
2018-10-06T00:54:10.923Z,1538787250.923 [NAL9602](ERROR): Data Fault
2018-10-06T00:54:11.030Z,1538787251.030 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T00:54:11.111Z,1538787251.111 [NAL9602](INFO): Powering down
2018-10-06T00:54:11.901Z,1538787251.901 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T00:54:11.901Z,1538787251.901 [NAL9602] No Fault, FailCount= 3
2018-10-06T00:54:41.451Z,1538787281.451 [NAL9602](INFO): Powering up NAL9602
2018-10-06T00:54:52.315Z,1538787292.315 [NAL9602](INFO): NAL9602 initialized
2018-10-06T00:55:53.227Z,1538787353.227 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:55:53.227Z,1538787353.227 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-10-06T00:55:53.227Z,1538787353.227 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:55:53.233Z,1538787353.233 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:55:53.233Z,1538787353.233 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-10-06T00:55:53.233Z,1538787353.233 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:55:53.255Z,1538787353.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:55:53.256Z,1538787353.256 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:55:53.689Z,1538787353.689 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:55:53.689Z,1538787353.689 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-10-06T00:55:53.690Z,1538787353.690 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:55:53.690Z,1538787353.690 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-10-06T00:55:56.835Z,1538787356.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:55:56.835Z,1538787356.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:55:56.836Z,1538787356.836 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:55:56.836Z,1538787356.836 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:55:56.836Z,1538787356.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:55:56.837Z,1538787356.837 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:57:21.887Z,1538787441.887 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T00:57:21.887Z,1538787441.887 [Default:CheckIn:C.Wait] Stopped
2018-10-06T00:57:21.887Z,1538787441.887 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T00:57:21.888Z,1538787441.888 [Default:CheckIn:D] Running Loop=1
2018-10-06T00:57:22.307Z,1538787442.307 [Default:CheckIn:D] Stopped
2018-10-06T00:57:22.308Z,1538787442.308 [Default:CheckIn:E] Running Loop=1
2018-10-06T00:57:22.745Z,1538787442.745 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2680.909115 min 
2018-10-06T00:57:22.746Z,1538787442.746 [Default:CheckIn:E] Stopped
2018-10-06T00:57:22.746Z,1538787442.746 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T00:57:22.746Z,1538787442.746 [Default:CheckIn] Stopped
2018-10-06T00:57:22.746Z,1538787442.746 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T00:57:22.746Z,1538787442.746 [Default:CheckIn](INFO): Running loop #260
2018-10-06T00:57:22.746Z,1538787442.746 [Default:CheckIn] Running Loop=260
2018-10-06T00:57:22.746Z,1538787442.746 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T00:57:22.747Z,1538787442.747 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T00:58:57.087Z,1538787537.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:58:57.088Z,1538787537.088 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-10-06T00:58:57.088Z,1538787537.088 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T00:58:57.098Z,1538787537.098 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T00:58:57.098Z,1538787537.098 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-10-06T00:58:57.098Z,1538787537.098 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T00:58:57.125Z,1538787537.125 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T00:58:57.126Z,1538787537.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T00:58:57.531Z,1538787537.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T00:58:57.531Z,1538787537.531 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-10-06T00:58:57.531Z,1538787537.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T00:58:57.532Z,1538787537.532 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-10-06T00:58:57.930Z,1538787537.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T00:58:57.930Z,1538787537.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:58:57.931Z,1538787537.931 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T00:58:57.931Z,1538787537.931 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T00:58:57.932Z,1538787537.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T00:58:57.932Z,1538787537.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:01:58.060Z,1538787718.060 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:01:58.060Z,1538787718.060 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-10-06T01:01:58.060Z,1538787718.060 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:01:58.077Z,1538787718.077 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:01:58.078Z,1538787718.078 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-10-06T01:01:58.078Z,1538787718.078 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:01:58.095Z,1538787718.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:01:58.095Z,1538787718.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:01:58.478Z,1538787718.478 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:01:58.478Z,1538787718.478 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-10-06T01:01:58.479Z,1538787718.479 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:01:58.479Z,1538787718.479 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-10-06T01:01:58.861Z,1538787718.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:01:58.862Z,1538787718.862 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:01:58.862Z,1538787718.862 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:01:58.862Z,1538787718.862 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:01:58.863Z,1538787718.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:01:58.863Z,1538787718.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:02:24.940Z,1538787744.940 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T00:57:22.7Z
2018-10-06T01:02:24.940Z,1538787744.940 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T01:02:24.940Z,1538787744.940 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T01:02:29.894Z,1538787749.894 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0781.lzma
2018-10-06T01:02:30.672Z,1538787750.672 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0781.lzma.bak
2018-10-06T01:02:30.672Z,1538787750.672 [DataOverHttps](INFO): SBD MOMSN=8612079
2018-10-06T01:02:40.092Z,1538787760.092 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0782.lzma
2018-10-06T01:02:40.867Z,1538787760.867 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0782.lzma.bak
2018-10-06T01:02:40.867Z,1538787760.867 [DataOverHttps](INFO): SBD MOMSN=8612081
2018-10-06T01:02:41.958Z,1538787761.958 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T01:02:41.959Z,1538787761.959 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T01:02:41.959Z,1538787761.959 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T01:02:45.247Z,1538787765.247 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-06T01:04:55.623Z,1538787895.623 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T01:04:55.623Z,1538787895.623 [NAL9602] Data Fault, FailCount= 4
2018-10-06T01:04:55.623Z,1538787895.623 [NAL9602](ERROR): Data Fault
2018-10-06T01:04:55.703Z,1538787895.703 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T01:04:55.999Z,1538787895.999 [NAL9602](INFO): Powering down
2018-10-06T01:04:56.884Z,1538787896.884 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T01:04:56.884Z,1538787896.884 [NAL9602] No Fault, FailCount= 4
2018-10-06T01:04:59.239Z,1538787899.239 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:04:59.239Z,1538787899.239 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-10-06T01:04:59.239Z,1538787899.239 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:04:59.241Z,1538787899.241 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:04:59.241Z,1538787899.241 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-10-06T01:04:59.241Z,1538787899.241 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:04:59.255Z,1538787899.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:04:59.255Z,1538787899.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:04:59.655Z,1538787899.655 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:04:59.655Z,1538787899.655 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-10-06T01:04:59.655Z,1538787899.655 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:04:59.656Z,1538787899.656 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-10-06T01:05:00.060Z,1538787900.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:05:00.061Z,1538787900.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:05:00.074Z,1538787900.074 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:05:00.074Z,1538787900.074 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:05:00.074Z,1538787900.074 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:05:00.075Z,1538787900.075 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:05:26.071Z,1538787926.071 [NAL9602](INFO): Powering up NAL9602
2018-10-06T01:05:37.271Z,1538787937.271 [NAL9602](INFO): NAL9602 initialized
2018-10-06T01:06:43.002Z,1538788003.002 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-06T01:06:43.002Z,1538788003.002 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,
2018-10-06T01:07:42.331Z,1538788062.331 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T01:07:42.331Z,1538788062.331 [Default:CheckIn:C.Wait] Stopped
2018-10-06T01:07:42.331Z,1538788062.331 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T01:07:42.331Z,1538788062.331 [Default:CheckIn:D] Running Loop=1
2018-10-06T01:07:42.734Z,1538788062.734 [Default:CheckIn:D] Stopped
2018-10-06T01:07:42.734Z,1538788062.734 [Default:CheckIn:E] Running Loop=1
2018-10-06T01:07:43.113Z,1538788063.113 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2691.249479 min 
2018-10-06T01:07:43.114Z,1538788063.114 [Default:CheckIn:E] Stopped
2018-10-06T01:07:43.114Z,1538788063.114 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T01:07:43.114Z,1538788063.114 [Default:CheckIn] Stopped
2018-10-06T01:07:43.114Z,1538788063.114 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T01:07:43.114Z,1538788063.114 [Default:CheckIn](INFO): Running loop #261
2018-10-06T01:07:43.114Z,1538788063.114 [Default:CheckIn] Running Loop=261
2018-10-06T01:07:43.114Z,1538788063.114 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T01:07:43.115Z,1538788063.115 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T01:08:03.101Z,1538788083.101 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:08:03.101Z,1538788083.101 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-10-06T01:08:03.101Z,1538788083.101 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:08:03.103Z,1538788083.103 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:08:03.103Z,1538788083.103 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-10-06T01:08:03.104Z,1538788083.104 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:08:03.117Z,1538788083.117 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:08:03.118Z,1538788083.118 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:08:03.248Z,1538788083.248 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:08:03.248Z,1538788083.248 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-10-06T01:08:03.248Z,1538788083.248 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:08:03.249Z,1538788083.249 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-10-06T01:08:03.591Z,1538788083.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:08:03.592Z,1538788083.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:08:03.592Z,1538788083.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:08:03.594Z,1538788083.594 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:08:03.595Z,1538788083.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:08:03.595Z,1538788083.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:11:03.726Z,1538788263.726 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:11:03.727Z,1538788263.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-10-06T01:11:03.727Z,1538788263.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:11:03.728Z,1538788263.728 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:11:03.729Z,1538788263.729 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-10-06T01:11:03.733Z,1538788263.733 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:11:03.758Z,1538788263.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:11:03.759Z,1538788263.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:11:04.158Z,1538788264.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:11:04.158Z,1538788264.158 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-10-06T01:11:04.159Z,1538788264.159 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:11:04.159Z,1538788264.159 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-10-06T01:11:04.546Z,1538788264.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:11:04.547Z,1538788264.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:11:04.547Z,1538788264.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:11:04.548Z,1538788264.548 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:11:04.548Z,1538788264.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:11:04.548Z,1538788264.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:12:45.547Z,1538788365.547 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T01:07:43.1Z
2018-10-06T01:12:45.547Z,1538788365.547 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T01:12:45.547Z,1538788365.547 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T01:12:50.704Z,1538788370.704 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0784.lzma
2018-10-06T01:12:51.487Z,1538788371.487 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0784.lzma.bak
2018-10-06T01:12:51.487Z,1538788371.487 [DataOverHttps](INFO): SBD MOMSN=8612083
2018-10-06T01:13:04.024Z,1538788384.024 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0785.lzma
2018-10-06T01:13:04.815Z,1538788384.815 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0785.lzma.bak
2018-10-06T01:13:04.815Z,1538788384.815 [DataOverHttps](INFO): SBD MOMSN=8612085
2018-10-06T01:13:05.845Z,1538788385.845 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T01:13:05.845Z,1538788385.845 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T01:13:05.845Z,1538788385.845 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T01:14:04.690Z,1538788444.690 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:14:04.690Z,1538788444.690 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-10-06T01:14:04.690Z,1538788444.690 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:14:04.692Z,1538788444.692 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:14:04.692Z,1538788444.692 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-10-06T01:14:04.692Z,1538788444.692 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:14:04.726Z,1538788444.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:14:04.726Z,1538788444.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:14:05.094Z,1538788445.094 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:14:05.094Z,1538788445.094 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-10-06T01:14:05.094Z,1538788445.094 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:14:05.094Z,1538788445.094 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-10-06T01:14:05.477Z,1538788445.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:14:05.478Z,1538788445.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:14:05.478Z,1538788445.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:14:05.479Z,1538788445.479 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:14:05.479Z,1538788445.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:14:05.479Z,1538788445.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:15:38.311Z,1538788538.311 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T01:15:38.311Z,1538788538.311 [NAL9602] Data Fault, FailCount= 5
2018-10-06T01:15:38.311Z,1538788538.311 [NAL9602](ERROR): Data Fault
2018-10-06T01:15:38.385Z,1538788538.385 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T01:15:38.386Z,1538788538.386 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-06T01:15:38.715Z,1538788538.715 [NAL9602](INFO): Powering down
2018-10-06T01:15:38.798Z,1538788538.798 [CBIT](INFO): Critical error at 20181006T011538
2018-10-06T01:17:05.739Z,1538788625.739 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:17:05.739Z,1538788625.739 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-10-06T01:17:05.739Z,1538788625.739 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:17:05.758Z,1538788625.758 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:17:05.758Z,1538788625.758 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-10-06T01:17:05.758Z,1538788625.758 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:17:05.783Z,1538788625.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:17:05.784Z,1538788625.784 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:17:06.147Z,1538788626.147 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:17:06.147Z,1538788626.147 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-10-06T01:17:06.148Z,1538788626.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:17:06.148Z,1538788626.148 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-10-06T01:17:06.526Z,1538788626.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:17:06.526Z,1538788626.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:17:06.527Z,1538788626.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:17:06.527Z,1538788626.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:17:06.527Z,1538788626.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:17:06.528Z,1538788626.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:17:38.675Z,1538788658.675 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T01:17:38.675Z,1538788658.675 [NAL9602] No Fault, FailCount= 5
2018-10-06T01:17:38.987Z,1538788658.987 [NAL9602](INFO): Powering up NAL9602
2018-10-06T01:17:51.655Z,1538788671.655 [NAL9602](INFO): NAL9602 initialized
2018-10-06T01:18:06.093Z,1538788686.093 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T01:18:06.093Z,1538788686.093 [Default:CheckIn:C.Wait] Stopped
2018-10-06T01:18:06.094Z,1538788686.094 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T01:18:06.094Z,1538788686.094 [Default:CheckIn:D] Running Loop=1
2018-10-06T01:18:06.489Z,1538788686.489 [Default:CheckIn:D] Stopped
2018-10-06T01:18:06.490Z,1538788686.490 [Default:CheckIn:E] Running Loop=1
2018-10-06T01:18:06.907Z,1538788686.907 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2701.645312 min 
2018-10-06T01:18:06.908Z,1538788686.908 [Default:CheckIn:E] Stopped
2018-10-06T01:18:06.908Z,1538788686.908 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T01:18:06.908Z,1538788686.908 [Default:CheckIn] Stopped
2018-10-06T01:18:06.908Z,1538788686.908 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T01:18:06.908Z,1538788686.908 [Default:CheckIn](INFO): Running loop #262
2018-10-06T01:18:06.908Z,1538788686.908 [Default:CheckIn] Running Loop=262
2018-10-06T01:18:06.908Z,1538788686.908 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T01:18:06.909Z,1538788686.909 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T01:18:30.613Z,1538788710.613 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-06T01:20:06.820Z,1538788806.820 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:20:06.820Z,1538788806.820 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-10-06T01:20:06.820Z,1538788806.820 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:20:06.822Z,1538788806.822 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:20:06.823Z,1538788806.823 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-10-06T01:20:06.823Z,1538788806.823 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:20:06.852Z,1538788806.852 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:20:06.852Z,1538788806.852 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:20:07.230Z,1538788807.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:20:07.230Z,1538788807.230 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-10-06T01:20:07.231Z,1538788807.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:20:07.231Z,1538788807.231 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-10-06T01:20:07.627Z,1538788807.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:20:07.627Z,1538788807.627 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:20:07.627Z,1538788807.627 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:20:07.628Z,1538788807.628 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:20:07.628Z,1538788807.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:20:07.629Z,1538788807.629 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:23:08.537Z,1538788988.537 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:23:08.537Z,1538788988.537 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-10-06T01:23:08.537Z,1538788988.537 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:23:08.539Z,1538788988.539 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:23:08.539Z,1538788988.539 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-10-06T01:23:08.539Z,1538788988.539 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:23:08.542Z,1538788988.542 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T01:18:06.9Z
2018-10-06T01:23:08.542Z,1538788988.542 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T01:23:08.542Z,1538788988.542 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T01:23:08.586Z,1538788988.586 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:23:08.586Z,1538788988.586 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:23:08.761Z,1538788988.761 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:23:08.761Z,1538788988.761 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-10-06T01:23:08.762Z,1538788988.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:23:08.762Z,1538788988.762 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-10-06T01:23:09.350Z,1538788989.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:23:09.350Z,1538788989.350 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:23:09.351Z,1538788989.351 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:23:09.351Z,1538788989.351 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:23:09.351Z,1538788989.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:23:09.352Z,1538788989.352 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:23:13.524Z,1538788993.524 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20181004T041305/Courier0787.lzma
2018-10-06T01:23:13.952Z,1538788993.952 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-06T01:23:13.952Z,1538788993.952 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-3268,-32768,V
2018-10-06T01:23:14.299Z,1538788994.299 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0787.lzma.bak
2018-10-06T01:23:14.299Z,1538788994.299 [DataOverHttps](INFO): SBD MOMSN=8612087
2018-10-06T01:23:23.460Z,1538789003.460 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0788.lzma
2018-10-06T01:23:24.226Z,1538789004.226 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0788.lzma.bak
2018-10-06T01:23:24.227Z,1538789004.227 [DataOverHttps](INFO): SBD MOMSN=8612089
2018-10-06T01:23:25.198Z,1538789005.198 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T01:23:25.198Z,1538789005.198 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T01:23:25.198Z,1538789005.198 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T01:26:09.399Z,1538789169.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:26:09.399Z,1538789169.399 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-10-06T01:26:09.399Z,1538789169.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:26:09.401Z,1538789169.401 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:26:09.401Z,1538789169.401 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-10-06T01:26:09.401Z,1538789169.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:26:09.423Z,1538789169.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:26:09.423Z,1538789169.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:26:09.826Z,1538789169.826 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:26:09.826Z,1538789169.826 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-10-06T01:26:09.827Z,1538789169.827 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:26:09.827Z,1538789169.827 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-10-06T01:26:10.183Z,1538789170.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:26:10.184Z,1538789170.184 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:26:10.184Z,1538789170.184 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:26:10.185Z,1538789170.185 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:26:10.185Z,1538789170.185 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:26:10.186Z,1538789170.186 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:27:36.596Z,1538789256.596 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.867, -0.001, 0.000
2018-10-06T01:27:52.527Z,1538789272.527 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T01:27:52.527Z,1538789272.527 [NAL9602] Data Fault, FailCount= 1
2018-10-06T01:27:52.527Z,1538789272.527 [NAL9602](ERROR): Data Fault
2018-10-06T01:27:52.622Z,1538789272.622 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T01:27:52.927Z,1538789272.927 [NAL9602](INFO): Powering down
2018-10-06T01:27:53.817Z,1538789273.817 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T01:27:53.817Z,1538789273.817 [NAL9602] No Fault, FailCount= 1
2018-10-06T01:28:23.023Z,1538789303.023 [NAL9602](INFO): Powering up NAL9602
2018-10-06T01:28:25.466Z,1538789305.466 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T01:28:25.466Z,1538789305.466 [Default:CheckIn:C.Wait] Stopped
2018-10-06T01:28:25.466Z,1538789305.466 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T01:28:25.466Z,1538789305.466 [Default:CheckIn:D] Running Loop=1
2018-10-06T01:28:25.883Z,1538789305.883 [Default:CheckIn:D] Stopped
2018-10-06T01:28:25.883Z,1538789305.883 [Default:CheckIn:E] Running Loop=1
2018-10-06T01:28:26.266Z,1538789306.266 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2711.968490 min 
2018-10-06T01:28:26.266Z,1538789306.266 [Default:CheckIn:E] Stopped
2018-10-06T01:28:26.266Z,1538789306.266 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T01:28:26.266Z,1538789306.266 [Default:CheckIn] Stopped
2018-10-06T01:28:26.266Z,1538789306.266 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T01:28:26.267Z,1538789306.267 [Default:CheckIn](INFO): Running loop #263
2018-10-06T01:28:26.267Z,1538789306.267 [Default:CheckIn] Running Loop=263
2018-10-06T01:28:26.267Z,1538789306.267 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T01:28:26.267Z,1538789306.267 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T01:28:33.831Z,1538789313.831 [NAL9602](INFO): NAL9602 initialized
2018-10-06T01:29:10.359Z,1538789350.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:29:10.359Z,1538789350.359 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-10-06T01:29:10.359Z,1538789350.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:29:10.365Z,1538789350.365 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:29:10.365Z,1538789350.365 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-10-06T01:29:10.365Z,1538789350.365 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:29:10.383Z,1538789350.383 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:29:10.383Z,1538789350.383 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:29:10.786Z,1538789350.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:29:10.786Z,1538789350.786 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-10-06T01:29:10.787Z,1538789350.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:29:10.787Z,1538789350.787 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-10-06T01:29:11.170Z,1538789351.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:29:11.170Z,1538789351.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:29:11.171Z,1538789351.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:29:11.171Z,1538789351.171 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:29:11.171Z,1538789351.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:29:11.172Z,1538789351.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:32:11.268Z,1538789531.268 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:32:11.268Z,1538789531.268 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-10-06T01:32:11.268Z,1538789531.268 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:32:11.274Z,1538789531.274 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:32:11.274Z,1538789531.274 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-10-06T01:32:11.274Z,1538789531.274 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:32:11.304Z,1538789531.304 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:32:11.304Z,1538789531.304 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:32:11.678Z,1538789531.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:32:11.678Z,1538789531.678 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-10-06T01:32:11.679Z,1538789531.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:32:11.679Z,1538789531.679 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-10-06T01:32:12.060Z,1538789532.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:32:12.061Z,1538789532.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:32:12.061Z,1538789532.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:32:12.062Z,1538789532.062 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:32:12.062Z,1538789532.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:32:12.063Z,1538789532.063 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:33:29.135Z,1538789609.135 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T01:28:26.3Z
2018-10-06T01:33:29.135Z,1538789609.135 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T01:33:29.135Z,1538789609.135 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T01:33:34.094Z,1538789614.094 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0790.lzma
2018-10-06T01:33:34.867Z,1538789614.867 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0790.lzma.bak
2018-10-06T01:33:34.867Z,1538789614.867 [DataOverHttps](INFO): SBD MOMSN=8612091
2018-10-06T01:33:44.094Z,1538789624.094 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0791.lzma
2018-10-06T01:33:44.882Z,1538789624.882 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0791.lzma.bak
2018-10-06T01:33:44.883Z,1538789624.883 [DataOverHttps](INFO): SBD MOMSN=8612093
2018-10-06T01:33:45.895Z,1538789625.895 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T01:33:45.895Z,1538789625.895 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T01:33:45.895Z,1538789625.895 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T01:35:12.327Z,1538789712.327 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe,*15.894,*-0.002,*0.000
2018-10-06T01:35:12.357Z,1538789712.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:35:12.358Z,1538789712.358 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-10-06T01:35:12.358Z,1538789712.358 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:35:12.359Z,1538789712.359 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:35:12.360Z,1538789712.360 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-10-06T01:35:12.360Z,1538789712.360 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:35:12.373Z,1538789712.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:35:12.374Z,1538789712.374 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:35:12.781Z,1538789712.781 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:35:12.782Z,1538789712.782 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-10-06T01:35:12.782Z,1538789712.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:35:12.782Z,1538789712.782 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-10-06T01:35:13.126Z,1538789713.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:35:13.126Z,1538789713.126 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:35:13.127Z,1538789713.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:35:13.127Z,1538789713.127 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:35:13.127Z,1538789713.127 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:35:13.128Z,1538789713.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:38:13.179Z,1538789893.179 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:38:13.179Z,1538789893.179 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-10-06T01:38:13.179Z,1538789893.179 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:38:13.181Z,1538789893.181 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:38:13.181Z,1538789893.181 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-10-06T01:38:13.181Z,1538789893.181 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:38:13.212Z,1538789893.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:38:13.212Z,1538789893.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:38:13.613Z,1538789893.613 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:38:13.613Z,1538789893.613 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-10-06T01:38:13.614Z,1538789893.614 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:38:13.614Z,1538789893.614 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-10-06T01:38:13.977Z,1538789893.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:38:13.978Z,1538789893.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:38:13.978Z,1538789893.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:38:13.979Z,1538789893.978 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:38:13.979Z,1538789893.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:38:13.979Z,1538789893.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:38:36.431Z,1538789916.431 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T01:38:36.431Z,1538789916.431 [NAL9602] Data Fault, FailCount= 2
2018-10-06T01:38:36.431Z,1538789916.431 [NAL9602](ERROR): Data Fault
2018-10-06T01:38:36.489Z,1538789916.489 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T01:38:36.823Z,1538789916.823 [NAL9602](INFO): Powering down
2018-10-06T01:38:37.696Z,1538789917.696 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T01:38:37.696Z,1538789917.696 [NAL9602] No Fault, FailCount= 2
2018-10-06T01:38:46.064Z,1538789926.064 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T01:38:46.065Z,1538789926.065 [Default:CheckIn:C.Wait] Stopped
2018-10-06T01:38:46.065Z,1538789926.065 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T01:38:46.065Z,1538789926.065 [Default:CheckIn:D] Running Loop=1
2018-10-06T01:38:46.461Z,1538789926.461 [Default:CheckIn:D] Stopped
2018-10-06T01:38:46.461Z,1538789926.461 [Default:CheckIn:E] Running Loop=1
2018-10-06T01:38:46.871Z,1538789926.871 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2722.311458 min 
2018-10-06T01:38:46.872Z,1538789926.872 [Default:CheckIn:E] Stopped
2018-10-06T01:38:46.872Z,1538789926.872 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T01:38:46.872Z,1538789926.872 [Default:CheckIn] Stopped
2018-10-06T01:38:46.872Z,1538789926.872 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T01:38:46.872Z,1538789926.872 [Default:CheckIn](INFO): Running loop #264
2018-10-06T01:38:46.872Z,1538789926.872 [Default:CheckIn] Running Loop=264
2018-10-06T01:38:46.872Z,1538789926.872 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T01:38:46.873Z,1538789926.873 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T01:39:07.205Z,1538789947.205 [NAL9602](INFO): Powering up NAL9602
2018-10-06T01:39:18.107Z,1538789958.107 [NAL9602](INFO): NAL9602 initialized
2018-10-06T01:39:43.848Z,1538789983.848 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-06T01:41:14.024Z,1538790074.024 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:41:14.025Z,1538790074.025 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-10-06T01:41:14.025Z,1538790074.025 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:41:14.026Z,1538790074.026 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:41:14.027Z,1538790074.027 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-10-06T01:41:14.027Z,1538790074.027 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:41:14.040Z,1538790074.040 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:41:14.040Z,1538790074.040 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:41:14.443Z,1538790074.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:41:14.443Z,1538790074.443 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-10-06T01:41:14.444Z,1538790074.444 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:41:14.444Z,1538790074.444 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-10-06T01:41:14.854Z,1538790074.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:41:14.854Z,1538790074.854 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:41:14.854Z,1538790074.854 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:41:14.855Z,1538790074.855 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:41:14.855Z,1538790074.855 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:41:14.856Z,1538790074.856 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:43:49.627Z,1538790229.627 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T01:38:46.9Z
2018-10-06T01:43:49.627Z,1538790229.627 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T01:43:49.627Z,1538790229.627 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T01:43:54.620Z,1538790234.620 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0793.lzma
2018-10-06T01:43:55.404Z,1538790235.404 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0793.lzma.bak
2018-10-06T01:43:55.404Z,1538790235.404 [DataOverHttps](INFO): SBD MOMSN=8612095
2018-10-06T01:43:56.361Z,1538790236.361 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-06T01:44:04.645Z,1538790244.645 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0794.lzma
2018-10-06T01:44:05.410Z,1538790245.410 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0794.lzma.bak
2018-10-06T01:44:05.411Z,1538790245.411 [DataOverHttps](INFO): SBD MOMSN=8612097
2018-10-06T01:44:06.399Z,1538790246.399 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.894, -0.002, 0.000
2018-10-06T01:44:06.416Z,1538790246.416 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T01:44:06.417Z,1538790246.417 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T01:44:06.433Z,1538790246.433 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T01:44:15.099Z,1538790255.099 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:44:15.099Z,1538790255.099 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-10-06T01:44:15.099Z,1538790255.099 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:44:15.101Z,1538790255.101 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:44:15.101Z,1538790255.101 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-10-06T01:44:15.101Z,1538790255.101 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:44:15.114Z,1538790255.114 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:44:15.115Z,1538790255.115 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:44:15.517Z,1538790255.517 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:44:15.517Z,1538790255.517 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-10-06T01:44:15.518Z,1538790255.518 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:44:15.518Z,1538790255.518 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-10-06T01:44:15.911Z,1538790255.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:44:15.912Z,1538790255.912 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:44:15.912Z,1538790255.912 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:44:15.912Z,1538790255.912 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:44:15.917Z,1538790255.917 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:44:15.917Z,1538790255.917 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:47:16.267Z,1538790436.267 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:47:16.267Z,1538790436.267 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-10-06T01:47:16.267Z,1538790436.267 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:47:16.269Z,1538790436.269 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:47:16.269Z,1538790436.269 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-10-06T01:47:16.269Z,1538790436.269 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:47:16.282Z,1538790436.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:47:16.283Z,1538790436.283 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:47:16.688Z,1538790436.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:47:16.688Z,1538790436.688 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-10-06T01:47:16.689Z,1538790436.689 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:47:16.689Z,1538790436.689 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-10-06T01:47:17.042Z,1538790437.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:47:17.042Z,1538790437.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:47:17.043Z,1538790437.043 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:47:17.043Z,1538790437.043 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:47:17.043Z,1538790437.043 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:47:17.044Z,1538790437.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:49:06.943Z,1538790546.943 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T01:49:06.943Z,1538790546.943 [Default:CheckIn:C.Wait] Stopped
2018-10-06T01:49:06.943Z,1538790546.943 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T01:49:06.943Z,1538790546.943 [Default:CheckIn:D] Running Loop=1
2018-10-06T01:49:07.325Z,1538790547.325 [Default:CheckIn:D] Stopped
2018-10-06T01:49:07.325Z,1538790547.325 [Default:CheckIn:E] Running Loop=1
2018-10-06T01:49:07.728Z,1538790547.728 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2732.659115 min 
2018-10-06T01:49:07.733Z,1538790547.733 [Default:CheckIn:E] Stopped
2018-10-06T01:49:07.733Z,1538790547.733 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T01:49:07.733Z,1538790547.733 [Default:CheckIn] Stopped
2018-10-06T01:49:07.733Z,1538790547.733 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T01:49:07.734Z,1538790547.734 [Default:CheckIn](INFO): Running loop #265
2018-10-06T01:49:07.734Z,1538790547.734 [Default:CheckIn] Running Loop=265
2018-10-06T01:49:07.734Z,1538790547.734 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T01:49:07.734Z,1538790547.734 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T01:49:20.075Z,1538790560.075 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T01:49:20.075Z,1538790560.075 [NAL9602] Data Fault, FailCount= 3
2018-10-06T01:49:20.075Z,1538790560.075 [NAL9602](ERROR): Data Fault
2018-10-06T01:49:20.167Z,1538790560.167 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T01:49:20.495Z,1538790560.495 [NAL9602](INFO): Powering down
2018-10-06T01:49:21.348Z,1538790561.348 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T01:49:21.348Z,1538790561.348 [NAL9602] No Fault, FailCount= 3
2018-10-06T01:49:50.567Z,1538790590.567 [NAL9602](INFO): Powering up NAL9602
2018-10-06T01:50:03.051Z,1538790603.051 [NAL9602](INFO): NAL9602 initialized
2018-10-06T01:50:17.084Z,1538790617.084 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:50:17.084Z,1538790617.084 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-10-06T01:50:17.084Z,1538790617.084 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:50:17.086Z,1538790617.086 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:50:17.087Z,1538790617.087 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-10-06T01:50:17.087Z,1538790617.087 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:50:17.100Z,1538790617.100 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:50:17.100Z,1538790617.100 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:50:17.510Z,1538790617.510 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:50:17.510Z,1538790617.510 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-10-06T01:50:17.511Z,1538790617.511 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:50:17.511Z,1538790617.511 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-10-06T01:50:17.902Z,1538790617.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:50:17.902Z,1538790617.902 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:50:17.903Z,1538790617.903 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:50:17.903Z,1538790617.903 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:50:17.904Z,1538790617.904 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:50:17.904Z,1538790617.904 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:53:18.115Z,1538790798.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:53:18.115Z,1538790798.115 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-10-06T01:53:18.116Z,1538790798.116 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:53:18.118Z,1538790798.118 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:53:18.118Z,1538790798.118 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-10-06T01:53:18.118Z,1538790798.118 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:53:18.155Z,1538790798.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:53:18.155Z,1538790798.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:53:18.543Z,1538790798.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:53:18.543Z,1538790798.543 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-10-06T01:53:18.544Z,1538790798.544 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:53:18.544Z,1538790798.544 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-10-06T01:53:18.955Z,1538790798.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:53:18.955Z,1538790798.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:53:18.956Z,1538790798.956 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:53:18.956Z,1538790798.956 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:53:18.957Z,1538790798.957 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:53:18.957Z,1538790798.957 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:54:09.439Z,1538790849.439 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T01:49:07.7Z
2018-10-06T01:54:09.439Z,1538790849.439 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T01:54:09.439Z,1538790849.439 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T01:54:14.354Z,1538790854.354 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0796.lzma
2018-10-06T01:54:15.136Z,1538790855.136 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0796.lzma.bak
2018-10-06T01:54:15.136Z,1538790855.136 [DataOverHttps](INFO): SBD MOMSN=8612099
2018-10-06T01:54:24.309Z,1538790864.309 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0797.lzma
2018-10-06T01:54:25.066Z,1538790865.066 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0797.lzma.bak
2018-10-06T01:54:25.067Z,1538790865.067 [DataOverHttps](INFO): SBD MOMSN=8612101
2018-10-06T01:54:26.059Z,1538790866.059 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T01:54:26.059Z,1538790866.059 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T01:54:26.059Z,1538790866.059 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T01:56:19.127Z,1538790979.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:56:19.127Z,1538790979.127 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-10-06T01:56:19.127Z,1538790979.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:56:19.137Z,1538790979.137 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:56:19.137Z,1538790979.137 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-10-06T01:56:19.137Z,1538790979.137 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:56:19.191Z,1538790979.191 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:56:19.192Z,1538790979.192 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:56:19.581Z,1538790979.581 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:56:19.582Z,1538790979.582 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-10-06T01:56:19.582Z,1538790979.582 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:56:19.582Z,1538790979.582 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-10-06T01:56:19.936Z,1538790979.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:56:19.936Z,1538790979.936 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:56:19.957Z,1538790979.957 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:56:19.957Z,1538790979.957 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:56:19.958Z,1538790979.958 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:56:19.958Z,1538790979.958 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:59:19.971Z,1538791159.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:59:19.971Z,1538791159.971 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-10-06T01:59:19.971Z,1538791159.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T01:59:19.973Z,1538791159.973 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T01:59:19.973Z,1538791159.973 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-10-06T01:59:19.973Z,1538791159.973 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T01:59:19.994Z,1538791159.994 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T01:59:19.995Z,1538791159.995 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T01:59:20.378Z,1538791160.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T01:59:20.378Z,1538791160.378 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-10-06T01:59:20.379Z,1538791160.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T01:59:20.379Z,1538791160.379 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-10-06T01:59:20.754Z,1538791160.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T01:59:20.754Z,1538791160.754 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:59:20.755Z,1538791160.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:59:20.755Z,1538791160.755 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T01:59:20.755Z,1538791160.755 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T01:59:20.756Z,1538791160.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T01:59:26.353Z,1538791166.353 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T01:59:26.353Z,1538791166.353 [Default:CheckIn:C.Wait] Stopped
2018-10-06T01:59:26.353Z,1538791166.353 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T01:59:26.353Z,1538791166.353 [Default:CheckIn:D] Running Loop=1
2018-10-06T01:59:26.768Z,1538791166.768 [Default:CheckIn:D] Stopped
2018-10-06T01:59:26.768Z,1538791166.768 [Default:CheckIn:E] Running Loop=1
2018-10-06T01:59:27.163Z,1538791167.163 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2742.983333 min 
2018-10-06T01:59:27.163Z,1538791167.163 [Default:CheckIn:E] Stopped
2018-10-06T01:59:27.163Z,1538791167.163 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T01:59:27.163Z,1538791167.163 [Default:CheckIn] Stopped
2018-10-06T01:59:27.163Z,1538791167.163 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T01:59:27.164Z,1538791167.164 [Default:CheckIn](INFO): Running loop #266
2018-10-06T01:59:27.164Z,1538791167.164 [Default:CheckIn] Running Loop=266
2018-10-06T01:59:27.164Z,1538791167.164 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T01:59:27.164Z,1538791167.164 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T02:00:04.455Z,1538791204.455 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T02:00:04.455Z,1538791204.455 [NAL9602] Data Fault, FailCount= 4
2018-10-06T02:00:04.455Z,1538791204.455 [NAL9602](ERROR): Data Fault
2018-10-06T02:00:04.529Z,1538791204.529 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T02:00:04.847Z,1538791204.847 [NAL9602](INFO): Powering down
2018-10-06T02:00:05.707Z,1538791205.707 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T02:00:05.707Z,1538791205.707 [NAL9602] No Fault, FailCount= 4
2018-10-06T02:00:34.923Z,1538791234.923 [NAL9602](INFO): Powering up NAL9602
2018-10-06T02:00:46.123Z,1538791246.123 [NAL9602](INFO): NAL9602 initialized
2018-10-06T02:01:44.932Z,1538791304.932 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-06T02:01:44.932Z,1538791304.932 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100519064  0.0,1448.9,  0
2018-10-06T02:02:21.074Z,1538791341.074 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:02:21.074Z,1538791341.074 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-10-06T02:02:21.074Z,1538791341.074 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:02:21.076Z,1538791341.076 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:02:21.076Z,1538791341.076 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-10-06T02:02:21.076Z,1538791341.076 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:02:21.106Z,1538791341.106 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:02:21.106Z,1538791341.106 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:02:21.483Z,1538791341.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:02:21.483Z,1538791341.483 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-10-06T02:02:21.483Z,1538791341.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:02:21.483Z,1538791341.483 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-10-06T02:02:21.888Z,1538791341.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:02:21.889Z,1538791341.889 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:02:21.889Z,1538791341.889 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:02:21.900Z,1538791341.900 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:02:21.900Z,1538791341.900 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:02:21.901Z,1538791341.901 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:04:29.378Z,1538791469.378 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T01:59:27.2Z
2018-10-06T02:04:29.378Z,1538791469.378 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T02:04:29.378Z,1538791469.378 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T02:04:34.355Z,1538791474.355 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0799.lzma
2018-10-06T02:04:35.123Z,1538791475.123 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0799.lzma.bak
2018-10-06T02:04:35.123Z,1538791475.123 [DataOverHttps](INFO): SBD MOMSN=8612103
2018-10-06T02:04:44.317Z,1538791484.317 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0800.lzma
2018-10-06T02:04:45.094Z,1538791485.094 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0800.lzma.bak
2018-10-06T02:04:45.094Z,1538791485.094 [DataOverHttps](INFO): SBD MOMSN=8612105
2018-10-06T02:04:46.107Z,1538791486.107 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T02:04:46.107Z,1538791486.107 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T02:04:46.107Z,1538791486.107 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T02:05:12.290Z,1538791512.290 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-06T02:05:12.291Z,1538791512.291 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768V
2018-10-06T02:05:21.907Z,1538791521.907 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:05:21.907Z,1538791521.907 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-10-06T02:05:21.907Z,1538791521.907 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:05:21.913Z,1538791521.913 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:05:21.913Z,1538791521.913 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-10-06T02:05:21.913Z,1538791521.913 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:05:21.935Z,1538791521.935 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:05:21.936Z,1538791521.936 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:05:25.170Z,1538791525.170 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:05:25.170Z,1538791525.170 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-10-06T02:05:25.170Z,1538791525.170 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:05:25.171Z,1538791525.171 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-10-06T02:05:25.260Z,1538791525.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:05:25.261Z,1538791525.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:05:25.262Z,1538791525.262 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:05:25.262Z,1538791525.262 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:05:25.262Z,1538791525.262 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:05:25.263Z,1538791525.263 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:08:22.934Z,1538791702.934 [RDI_Pathfinder](ERROR): only read 4 of 5 data items
2018-10-06T02:08:22.935Z,1538791702.935 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32BS,-32768,-32768,-32768,V
2018-10-06T02:08:25.339Z,1538791705.339 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:08:25.339Z,1538791705.339 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-10-06T02:08:25.339Z,1538791705.339 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:08:25.345Z,1538791705.345 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:08:25.345Z,1538791705.345 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-10-06T02:08:25.345Z,1538791705.345 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:08:25.371Z,1538791705.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:08:25.371Z,1538791705.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:08:25.770Z,1538791705.770 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:08:25.770Z,1538791705.770 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-10-06T02:08:25.770Z,1538791705.770 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:08:25.770Z,1538791705.770 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-10-06T02:08:26.121Z,1538791706.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:08:26.122Z,1538791706.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:08:26.122Z,1538791706.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:08:26.123Z,1538791706.123 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:08:26.123Z,1538791706.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:08:26.123Z,1538791706.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:09:46.328Z,1538791786.328 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T02:09:46.328Z,1538791786.328 [Default:CheckIn:C.Wait] Stopped
2018-10-06T02:09:46.328Z,1538791786.328 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T02:09:46.329Z,1538791786.329 [Default:CheckIn:D] Running Loop=1
2018-10-06T02:09:46.770Z,1538791786.770 [Default:CheckIn:D] Stopped
2018-10-06T02:09:46.771Z,1538791786.771 [Default:CheckIn:E] Running Loop=1
2018-10-06T02:09:47.125Z,1538791787.125 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2753.316667 min 
2018-10-06T02:09:47.126Z,1538791787.126 [Default:CheckIn:E] Stopped
2018-10-06T02:09:47.126Z,1538791787.126 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T02:09:47.126Z,1538791787.126 [Default:CheckIn] Stopped
2018-10-06T02:09:47.126Z,1538791787.126 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T02:09:47.126Z,1538791787.126 [Default:CheckIn](INFO): Running loop #267
2018-10-06T02:09:47.126Z,1538791787.126 [Default:CheckIn] Running Loop=267
2018-10-06T02:09:47.126Z,1538791787.126 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T02:09:47.126Z,1538791787.126 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T02:10:08.812Z,1538791808.812 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.894, 0.002, 65.535
2018-10-06T02:10:47.303Z,1538791847.303 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T02:10:47.303Z,1538791847.303 [NAL9602] Data Fault, FailCount= 5
2018-10-06T02:10:47.303Z,1538791847.303 [NAL9602](ERROR): Data Fault
2018-10-06T02:10:47.372Z,1538791847.372 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T02:10:47.372Z,1538791847.372 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-06T02:10:47.703Z,1538791847.703 [NAL9602](INFO): Powering down
2018-10-06T02:10:47.786Z,1538791847.786 [CBIT](INFO): Critical error at 20181006T021047
2018-10-06T02:11:26.559Z,1538791886.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:11:26.560Z,1538791886.560 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-10-06T02:11:26.560Z,1538791886.560 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:11:26.562Z,1538791886.562 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:11:26.562Z,1538791886.562 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-10-06T02:11:26.562Z,1538791886.562 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:11:26.575Z,1538791886.575 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:11:26.575Z,1538791886.575 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:11:26.935Z,1538791886.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:11:26.935Z,1538791886.935 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-10-06T02:11:26.936Z,1538791886.936 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:11:26.936Z,1538791886.936 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-10-06T02:11:27.314Z,1538791887.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:11:27.314Z,1538791887.314 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:11:27.315Z,1538791887.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:11:27.315Z,1538791887.315 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:11:27.315Z,1538791887.315 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:11:27.316Z,1538791887.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:12:47.578Z,1538791967.578 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T02:12:47.578Z,1538791967.578 [NAL9602] No Fault, FailCount= 5
2018-10-06T02:12:47.883Z,1538791967.883 [NAL9602](INFO): Powering up NAL9602
2018-10-06T02:12:59.087Z,1538791979.087 [NAL9602](INFO): NAL9602 initialized
2018-10-06T02:13:59.715Z,1538792039.715 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-06T02:13:59.715Z,1538792039.715 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,     ,   0.00,69018.34
2018-10-06T02:14:15.808Z,1538792055.808 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-06T02:14:27.425Z,1538792067.425 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:14:27.425Z,1538792067.425 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-10-06T02:14:27.425Z,1538792067.425 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:14:27.427Z,1538792067.427 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:14:27.427Z,1538792067.427 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-10-06T02:14:27.427Z,1538792067.427 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:14:27.440Z,1538792067.440 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:14:27.441Z,1538792067.441 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:14:27.860Z,1538792067.860 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:14:27.860Z,1538792067.860 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-10-06T02:14:27.861Z,1538792067.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:14:27.865Z,1538792067.865 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-10-06T02:14:28.222Z,1538792068.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:14:28.222Z,1538792068.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:14:28.223Z,1538792068.223 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:14:28.223Z,1538792068.223 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:14:28.223Z,1538792068.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:14:28.224Z,1538792068.224 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:14:49.858Z,1538792089.858 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T02:09:47.1Z
2018-10-06T02:14:49.858Z,1538792089.858 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T02:14:49.858Z,1538792089.858 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T02:14:54.798Z,1538792094.798 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0802.lzma
2018-10-06T02:14:55.572Z,1538792095.572 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0802.lzma.bak
2018-10-06T02:14:55.572Z,1538792095.572 [DataOverHttps](INFO): SBD MOMSN=8612107
2018-10-06T02:15:04.839Z,1538792104.839 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0803.lzma
2018-10-06T02:15:05.626Z,1538792105.626 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0803.lzma.bak
2018-10-06T02:15:05.627Z,1538792105.627 [DataOverHttps](INFO): SBD MOMSN=8612109
2018-10-06T02:15:06.857Z,1538792106.857 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T02:15:06.857Z,1538792106.857 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T02:15:06.857Z,1538792106.857 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T02:17:31.394Z,1538792251.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:17:31.395Z,1538792251.395 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-10-06T02:17:31.395Z,1538792251.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:17:31.396Z,1538792251.396 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:17:31.397Z,1538792251.397 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-10-06T02:17:31.397Z,1538792251.397 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:17:31.410Z,1538792251.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:17:31.410Z,1538792251.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:17:31.547Z,1538792251.547 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:17:31.547Z,1538792251.547 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-10-06T02:17:31.548Z,1538792251.548 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:17:31.548Z,1538792251.548 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-10-06T02:17:31.879Z,1538792251.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:17:31.880Z,1538792251.880 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:17:31.880Z,1538792251.880 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:17:31.881Z,1538792251.881 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:17:31.885Z,1538792251.885 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:17:31.886Z,1538792251.886 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:19:53.558Z,1538792393.558 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,69368.59
2018-10-06T02:20:07.180Z,1538792407.180 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T02:20:07.199Z,1538792407.199 [Default:CheckIn:C.Wait] Stopped
2018-10-06T02:20:07.200Z,1538792407.200 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T02:20:07.200Z,1538792407.200 [Default:CheckIn:D] Running Loop=1
2018-10-06T02:20:07.588Z,1538792407.588 [Default:CheckIn:D] Stopped
2018-10-06T02:20:07.588Z,1538792407.588 [Default:CheckIn:E] Running Loop=1
2018-10-06T02:20:07.968Z,1538792407.968 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2763.663542 min 
2018-10-06T02:20:07.968Z,1538792407.968 [Default:CheckIn:E] Stopped
2018-10-06T02:20:07.968Z,1538792407.968 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T02:20:07.968Z,1538792407.968 [Default:CheckIn] Stopped
2018-10-06T02:20:07.969Z,1538792407.969 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T02:20:07.969Z,1538792407.969 [Default:CheckIn](INFO): Running loop #268
2018-10-06T02:20:07.969Z,1538792407.969 [Default:CheckIn] Running Loop=268
2018-10-06T02:20:07.969Z,1538792407.969 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T02:20:07.969Z,1538792407.969 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T02:20:32.063Z,1538792432.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:20:32.063Z,1538792432.063 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-10-06T02:20:32.063Z,1538792432.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:20:32.093Z,1538792432.093 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:20:32.093Z,1538792432.093 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-10-06T02:20:32.093Z,1538792432.093 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:20:32.123Z,1538792432.123 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:20:32.124Z,1538792432.124 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:20:32.489Z,1538792432.489 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:20:32.489Z,1538792432.489 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-10-06T02:20:32.490Z,1538792432.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:20:32.490Z,1538792432.490 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-10-06T02:20:32.867Z,1538792432.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:20:32.868Z,1538792432.868 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:20:32.868Z,1538792432.868 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:20:32.869Z,1538792432.869 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:20:32.869Z,1538792432.869 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:20:32.870Z,1538792432.870 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:23:00.535Z,1538792580.535 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T02:23:00.535Z,1538792580.535 [NAL9602] Data Fault, FailCount= 1
2018-10-06T02:23:00.535Z,1538792580.535 [NAL9602](ERROR): Data Fault
2018-10-06T02:23:00.597Z,1538792580.597 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T02:23:00.931Z,1538792580.931 [NAL9602](INFO): Powering down
2018-10-06T02:23:01.792Z,1538792581.792 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T02:23:01.792Z,1538792581.792 [NAL9602] No Fault, FailCount= 1
2018-10-06T02:23:31.115Z,1538792611.115 [NAL9602](INFO): Powering up NAL9602
2018-10-06T02:23:33.163Z,1538792613.163 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:23:33.163Z,1538792613.163 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2018-10-06T02:23:33.163Z,1538792613.163 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:23:33.169Z,1538792613.169 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:23:33.169Z,1538792613.169 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2018-10-06T02:23:33.169Z,1538792613.169 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:23:33.197Z,1538792613.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:23:33.198Z,1538792613.198 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:23:33.589Z,1538792613.589 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:23:33.589Z,1538792613.589 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2018-10-06T02:23:33.590Z,1538792613.590 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:23:33.590Z,1538792613.590 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2018-10-06T02:23:33.946Z,1538792613.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:23:33.947Z,1538792613.947 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:23:33.947Z,1538792613.947 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:23:33.947Z,1538792613.947 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:23:33.948Z,1538792613.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:23:33.948Z,1538792613.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:23:41.919Z,1538792621.919 [NAL9602](INFO): NAL9602 initialized
2018-10-06T02:25:09.848Z,1538792709.848 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T02:20:07.0Z
2018-10-06T02:25:09.848Z,1538792709.848 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T02:25:09.848Z,1538792709.848 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T02:25:14.907Z,1538792714.907 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0805.lzma
2018-10-06T02:25:15.679Z,1538792715.679 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0805.lzma.bak
2018-10-06T02:25:15.679Z,1538792715.679 [DataOverHttps](INFO): SBD MOMSN=8612111
2018-10-06T02:25:25.012Z,1538792725.012 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0806.lzma
2018-10-06T02:25:25.790Z,1538792725.790 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0806.lzma.bak
2018-10-06T02:25:25.790Z,1538792725.790 [DataOverHttps](INFO): SBD MOMSN=8612113
2018-10-06T02:25:26.800Z,1538792726.800 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T02:25:26.800Z,1538792726.800 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T02:25:26.800Z,1538792726.800 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T02:25:56.268Z,1538792756.268 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-06T02:26:06.786Z,1538792766.786 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-06T02:26:33.999Z,1538792793.999 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:26:33.999Z,1538792793.999 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2018-10-06T02:26:33.999Z,1538792793.999 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:26:34.017Z,1538792794.017 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:26:34.017Z,1538792794.017 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2018-10-06T02:26:34.017Z,1538792794.017 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:26:34.039Z,1538792794.039 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:26:34.040Z,1538792794.040 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:26:34.433Z,1538792794.433 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:26:34.433Z,1538792794.433 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2018-10-06T02:26:34.434Z,1538792794.434 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:26:34.434Z,1538792794.434 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2018-10-06T02:26:34.840Z,1538792794.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:26:34.840Z,1538792794.840 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:26:34.840Z,1538792794.840 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:26:34.841Z,1538792794.841 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:26:34.841Z,1538792794.841 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:26:34.842Z,1538792794.842 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:29:37.240Z,1538792977.240 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:29:37.240Z,1538792977.240 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2018-10-06T02:29:37.240Z,1538792977.240 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:29:37.242Z,1538792977.242 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:29:37.243Z,1538792977.243 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2018-10-06T02:29:37.243Z,1538792977.243 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:29:37.256Z,1538792977.256 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:29:37.256Z,1538792977.256 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:29:37.390Z,1538792977.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:29:37.390Z,1538792977.390 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2018-10-06T02:29:37.390Z,1538792977.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:29:37.391Z,1538792977.391 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2018-10-06T02:29:37.754Z,1538792977.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:29:37.755Z,1538792977.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:29:37.755Z,1538792977.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:29:37.755Z,1538792977.755 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:29:37.756Z,1538792977.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:29:37.756Z,1538792977.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:30:13.778Z,1538793013.778 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-06T02:30:27.001Z,1538793027.001 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T02:30:27.005Z,1538793027.005 [Default:CheckIn:C.Wait] Stopped
2018-10-06T02:30:27.005Z,1538793027.005 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T02:30:27.005Z,1538793027.005 [Default:CheckIn:D] Running Loop=1
2018-10-06T02:30:27.406Z,1538793027.406 [Default:CheckIn:D] Stopped
2018-10-06T02:30:27.406Z,1538793027.406 [Default:CheckIn:E] Running Loop=1
2018-10-06T02:30:27.829Z,1538793027.829 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2773.994010 min 
2018-10-06T02:30:27.829Z,1538793027.829 [Default:CheckIn:E] Stopped
2018-10-06T02:30:27.829Z,1538793027.829 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T02:30:27.830Z,1538793027.830 [Default:CheckIn] Stopped
2018-10-06T02:30:27.830Z,1538793027.830 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T02:30:27.830Z,1538793027.830 [Default:CheckIn](INFO): Running loop #269
2018-10-06T02:30:27.830Z,1538793027.830 [Default:CheckIn] Running Loop=269
2018-10-06T02:30:27.830Z,1538793027.830 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T02:30:27.830Z,1538793027.830 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T02:32:37.770Z,1538793157.770 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:32:37.770Z,1538793157.770 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2018-10-06T02:32:37.770Z,1538793157.770 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:32:37.772Z,1538793157.772 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:32:37.772Z,1538793157.772 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2018-10-06T02:32:37.772Z,1538793157.772 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:32:37.785Z,1538793157.785 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:32:37.785Z,1538793157.785 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:32:38.182Z,1538793158.182 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:32:38.182Z,1538793158.182 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2018-10-06T02:32:38.183Z,1538793158.183 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:32:38.183Z,1538793158.183 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2018-10-06T02:32:38.591Z,1538793158.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:32:38.592Z,1538793158.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:32:38.592Z,1538793158.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:32:38.592Z,1538793158.592 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:32:38.597Z,1538793158.597 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:32:38.597Z,1538793158.597 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:33:44.067Z,1538793224.067 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T02:33:44.067Z,1538793224.067 [NAL9602] Data Fault, FailCount= 2
2018-10-06T02:33:44.067Z,1538793224.067 [NAL9602](ERROR): Data Fault
2018-10-06T02:33:44.124Z,1538793224.124 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T02:33:44.423Z,1538793224.423 [NAL9602](INFO): Powering down
2018-10-06T02:33:45.272Z,1538793225.272 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T02:33:45.272Z,1538793225.272 [NAL9602] No Fault, FailCount= 2
2018-10-06T02:34:14.815Z,1538793254.815 [NAL9602](INFO): Powering up NAL9602
2018-10-06T02:34:25.707Z,1538793265.707 [NAL9602](INFO): NAL9602 initialized
2018-10-06T02:35:29.857Z,1538793329.857 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T02:30:27.8Z
2018-10-06T02:35:29.857Z,1538793329.857 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T02:35:29.857Z,1538793329.857 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T02:35:34.833Z,1538793334.833 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0808.lzma
2018-10-06T02:35:35.624Z,1538793335.624 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0808.lzma.bak
2018-10-06T02:35:35.624Z,1538793335.624 [DataOverHttps](INFO): SBD MOMSN=8612115
2018-10-06T02:35:39.940Z,1538793339.940 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:35:39.940Z,1538793339.940 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2018-10-06T02:35:39.940Z,1538793339.940 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:35:39.942Z,1538793339.942 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:35:39.942Z,1538793339.942 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2018-10-06T02:35:39.942Z,1538793339.942 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:35:39.955Z,1538793339.955 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:35:39.955Z,1538793339.955 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:35:40.082Z,1538793340.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:35:40.082Z,1538793340.082 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2018-10-06T02:35:40.083Z,1538793340.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:35:40.083Z,1538793340.083 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2018-10-06T02:35:40.436Z,1538793340.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:35:40.437Z,1538793340.437 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:35:40.437Z,1538793340.437 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:35:40.438Z,1538793340.438 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:35:40.438Z,1538793340.438 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:35:40.438Z,1538793340.438 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:35:44.898Z,1538793344.898 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0809.lzma
2018-10-06T02:35:45.687Z,1538793345.687 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0809.lzma.bak
2018-10-06T02:35:45.687Z,1538793345.687 [DataOverHttps](INFO): SBD MOMSN=8612117
2018-10-06T02:35:46.680Z,1538793346.680 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T02:35:46.680Z,1538793346.680 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T02:35:46.680Z,1538793346.680 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T02:38:40.771Z,1538793520.771 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:38:40.771Z,1538793520.771 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2018-10-06T02:38:40.771Z,1538793520.771 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:38:40.773Z,1538793520.773 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:38:40.773Z,1538793520.773 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2018-10-06T02:38:40.773Z,1538793520.773 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:38:40.807Z,1538793520.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:38:40.808Z,1538793520.808 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:38:41.210Z,1538793521.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:38:41.210Z,1538793521.210 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2018-10-06T02:38:41.211Z,1538793521.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:38:41.211Z,1538793521.211 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2018-10-06T02:38:41.570Z,1538793521.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:38:41.570Z,1538793521.570 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:38:41.571Z,1538793521.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:38:41.571Z,1538793521.571 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:38:41.571Z,1538793521.571 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:38:41.572Z,1538793521.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:40:47.115Z,1538793647.115 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T02:40:47.115Z,1538793647.115 [Default:CheckIn:C.Wait] Stopped
2018-10-06T02:40:47.115Z,1538793647.115 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T02:40:47.115Z,1538793647.115 [Default:CheckIn:D] Running Loop=1
2018-10-06T02:40:47.531Z,1538793647.531 [Default:CheckIn:D] Stopped
2018-10-06T02:40:47.532Z,1538793647.532 [Default:CheckIn:E] Running Loop=1
2018-10-06T02:40:47.901Z,1538793647.901 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2784.329427 min 
2018-10-06T02:40:47.901Z,1538793647.901 [Default:CheckIn:E] Stopped
2018-10-06T02:40:47.901Z,1538793647.901 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T02:40:47.901Z,1538793647.901 [Default:CheckIn] Stopped
2018-10-06T02:40:47.901Z,1538793647.901 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T02:40:47.902Z,1538793647.902 [Default:CheckIn](INFO): Running loop #270
2018-10-06T02:40:47.902Z,1538793647.902 [Default:CheckIn] Running Loop=270
2018-10-06T02:40:47.902Z,1538793647.902 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T02:40:47.902Z,1538793647.902 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T02:41:43.203Z,1538793703.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:41:43.203Z,1538793703.203 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2018-10-06T02:41:43.203Z,1538793703.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:41:43.205Z,1538793703.205 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:41:43.205Z,1538793703.205 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2018-10-06T02:41:43.205Z,1538793703.205 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:41:43.238Z,1538793703.238 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:41:43.239Z,1538793703.239 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:41:43.351Z,1538793703.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:41:43.351Z,1538793703.351 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2018-10-06T02:41:43.351Z,1538793703.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:41:43.352Z,1538793703.352 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2018-10-06T02:41:43.712Z,1538793703.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:41:43.717Z,1538793703.717 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:41:43.717Z,1538793703.717 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:41:43.718Z,1538793703.718 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:41:43.718Z,1538793703.718 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:41:43.719Z,1538793703.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:44:27.353Z,1538793867.353 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T02:44:27.353Z,1538793867.353 [NAL9602] Data Fault, FailCount= 3
2018-10-06T02:44:27.354Z,1538793867.354 [NAL9602](ERROR): Data Fault
2018-10-06T02:44:27.434Z,1538793867.434 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T02:44:27.763Z,1538793867.763 [NAL9602](INFO): Powering down
2018-10-06T02:44:28.634Z,1538793868.634 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T02:44:28.634Z,1538793868.634 [NAL9602] No Fault, FailCount= 3
2018-10-06T02:44:43.879Z,1538793883.879 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:44:43.879Z,1538793883.879 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2018-10-06T02:44:43.879Z,1538793883.879 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:44:43.881Z,1538793883.881 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:44:43.881Z,1538793883.881 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2018-10-06T02:44:43.881Z,1538793883.881 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:44:43.911Z,1538793883.911 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:44:43.911Z,1538793883.911 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:44:44.278Z,1538793884.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:44:44.278Z,1538793884.278 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2018-10-06T02:44:44.279Z,1538793884.279 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:44:44.279Z,1538793884.279 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2018-10-06T02:44:44.687Z,1538793884.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:44:44.687Z,1538793884.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:44:44.687Z,1538793884.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:44:44.688Z,1538793884.688 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:44:44.688Z,1538793884.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:44:44.689Z,1538793884.689 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:44:57.823Z,1538793897.823 [NAL9602](INFO): Powering up NAL9602
2018-10-06T02:45:09.023Z,1538793909.023 [NAL9602](INFO): NAL9602 initialized
2018-10-06T02:45:50.358Z,1538793950.358 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T02:40:47.9Z
2018-10-06T02:45:50.358Z,1538793950.358 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T02:45:50.358Z,1538793950.358 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T02:45:55.269Z,1538793955.269 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0811.lzma
2018-10-06T02:45:56.051Z,1538793956.051 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0811.lzma.bak
2018-10-06T02:45:56.051Z,1538793956.051 [DataOverHttps](INFO): SBD MOMSN=8612119
2018-10-06T02:46:05.267Z,1538793965.267 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0812.lzma
2018-10-06T02:46:06.030Z,1538793966.030 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0812.lzma.bak
2018-10-06T02:46:06.030Z,1538793966.030 [DataOverHttps](INFO): SBD MOMSN=8612121
2018-10-06T02:46:07.022Z,1538793967.022 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T02:46:07.022Z,1538793967.022 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T02:46:07.022Z,1538793967.022 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T02:47:44.969Z,1538794064.969 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:47:44.969Z,1538794064.969 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2018-10-06T02:47:44.969Z,1538794064.969 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:47:44.971Z,1538794064.971 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:47:44.971Z,1538794064.971 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2018-10-06T02:47:44.971Z,1538794064.971 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:47:44.993Z,1538794064.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:47:44.997Z,1538794064.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:47:45.406Z,1538794065.406 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:47:45.406Z,1538794065.406 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2018-10-06T02:47:45.407Z,1538794065.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:47:45.407Z,1538794065.407 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2018-10-06T02:47:45.787Z,1538794065.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:47:45.788Z,1538794065.788 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:47:45.788Z,1538794065.788 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:47:45.793Z,1538794065.793 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:47:45.793Z,1538794065.793 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:47:45.794Z,1538794065.794 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:50:45.815Z,1538794245.815 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:50:45.815Z,1538794245.815 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2018-10-06T02:50:45.815Z,1538794245.815 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:50:45.821Z,1538794245.821 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:50:45.821Z,1538794245.821 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2018-10-06T02:50:45.821Z,1538794245.821 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:50:45.842Z,1538794245.842 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:50:45.843Z,1538794245.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:50:46.238Z,1538794246.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:50:46.238Z,1538794246.238 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2018-10-06T02:50:46.238Z,1538794246.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:50:46.238Z,1538794246.238 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2018-10-06T02:50:46.624Z,1538794246.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:50:46.624Z,1538794246.624 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:50:46.625Z,1538794246.625 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:50:46.629Z,1538794246.629 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:50:46.630Z,1538794246.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:50:46.630Z,1538794246.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:51:07.547Z,1538794267.547 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T02:51:07.547Z,1538794267.547 [Default:CheckIn:C.Wait] Stopped
2018-10-06T02:51:07.547Z,1538794267.547 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T02:51:07.547Z,1538794267.547 [Default:CheckIn:D] Running Loop=1
2018-10-06T02:51:07.944Z,1538794267.944 [Default:CheckIn:D] Stopped
2018-10-06T02:51:07.944Z,1538794267.944 [Default:CheckIn:E] Running Loop=1
2018-10-06T02:51:08.333Z,1538794268.333 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2794.669271 min 
2018-10-06T02:51:08.334Z,1538794268.334 [Default:CheckIn:E] Stopped
2018-10-06T02:51:08.334Z,1538794268.334 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T02:51:08.334Z,1538794268.334 [Default:CheckIn] Stopped
2018-10-06T02:51:08.334Z,1538794268.334 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T02:51:08.334Z,1538794268.334 [Default:CheckIn](INFO): Running loop #271
2018-10-06T02:51:08.334Z,1538794268.334 [Default:CheckIn] Running Loop=271
2018-10-06T02:51:08.335Z,1538794268.335 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T02:51:08.335Z,1538794268.335 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T02:53:49.522Z,1538794429.522 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:53:49.522Z,1538794429.522 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2018-10-06T02:53:49.522Z,1538794429.522 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:53:49.524Z,1538794429.524 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:53:49.524Z,1538794429.524 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2018-10-06T02:53:49.524Z,1538794429.524 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:53:49.554Z,1538794429.554 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:53:49.555Z,1538794429.555 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:53:49.675Z,1538794429.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:53:49.675Z,1538794429.675 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2018-10-06T02:53:49.675Z,1538794429.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:53:49.675Z,1538794429.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2018-10-06T02:53:50.053Z,1538794430.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:53:50.054Z,1538794430.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:53:50.054Z,1538794430.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:53:50.055Z,1538794430.055 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:53:50.055Z,1538794430.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:53:50.055Z,1538794430.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:55:12.567Z,1538794512.567 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T02:55:12.567Z,1538794512.567 [NAL9602] Data Fault, FailCount= 4
2018-10-06T02:55:12.567Z,1538794512.567 [NAL9602](ERROR): Data Fault
2018-10-06T02:55:12.649Z,1538794512.649 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T02:55:12.975Z,1538794512.975 [NAL9602](INFO): Powering down
2018-10-06T02:55:13.840Z,1538794513.840 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T02:55:13.840Z,1538794513.840 [NAL9602] No Fault, FailCount= 4
2018-10-06T02:55:43.051Z,1538794543.051 [NAL9602](INFO): Powering up NAL9602
2018-10-06T02:55:53.855Z,1538794553.855 [NAL9602](INFO): NAL9602 initialized
2018-10-06T02:56:10.667Z,1538794570.667 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T02:51:08.3Z
2018-10-06T02:56:10.667Z,1538794570.667 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T02:56:10.667Z,1538794570.667 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T02:56:16.347Z,1538794576.347 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0814.lzma
2018-10-06T02:56:17.099Z,1538794577.099 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0814.lzma.bak
2018-10-06T02:56:17.099Z,1538794577.099 [DataOverHttps](INFO): SBD MOMSN=8612123
2018-10-06T02:56:31.452Z,1538794591.452 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0815.lzma
2018-10-06T02:56:32.251Z,1538794592.251 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0815.lzma.bak
2018-10-06T02:56:32.251Z,1538794592.251 [DataOverHttps](INFO): SBD MOMSN=8612125
2018-10-06T02:56:33.272Z,1538794593.272 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T02:56:33.272Z,1538794593.272 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T02:56:33.272Z,1538794593.272 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T02:56:50.431Z,1538794610.431 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:56:50.431Z,1538794610.431 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2018-10-06T02:56:50.431Z,1538794610.431 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:56:50.449Z,1538794610.449 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:56:50.449Z,1538794610.449 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2018-10-06T02:56:50.449Z,1538794610.449 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:56:50.471Z,1538794610.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:56:50.471Z,1538794610.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:56:50.898Z,1538794610.898 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:56:50.898Z,1538794610.898 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2018-10-06T02:56:50.898Z,1538794610.898 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:56:50.898Z,1538794610.898 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2018-10-06T02:56:51.242Z,1538794611.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:56:51.242Z,1538794611.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:56:51.243Z,1538794611.243 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:56:51.243Z,1538794611.243 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:56:51.243Z,1538794611.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:56:51.244Z,1538794611.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:57:38.545Z,1538794658.545 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-06T02:57:38.546Z,1538794658.546 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0    +0.00,   0.00,71616.88
2018-10-06T02:59:15.607Z,1538794755.607 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-06T02:59:51.342Z,1538794791.342 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:59:51.342Z,1538794791.342 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2018-10-06T02:59:51.343Z,1538794791.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T02:59:51.344Z,1538794791.344 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T02:59:51.344Z,1538794791.344 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2018-10-06T02:59:51.345Z,1538794791.345 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T02:59:51.370Z,1538794791.370 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T02:59:51.370Z,1538794791.370 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T02:59:51.813Z,1538794791.813 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T02:59:51.814Z,1538794791.814 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2018-10-06T02:59:51.815Z,1538794791.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T02:59:51.815Z,1538794791.815 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2018-10-06T02:59:52.154Z,1538794792.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T02:59:52.155Z,1538794792.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:59:52.155Z,1538794792.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T02:59:52.155Z,1538794792.155 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T02:59:52.156Z,1538794792.156 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T02:59:52.156Z,1538794792.156 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:01:33.746Z,1538794893.746 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T03:01:33.746Z,1538794893.746 [Default:CheckIn:C.Wait] Stopped
2018-10-06T03:01:33.746Z,1538794893.746 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T03:01:33.746Z,1538794893.746 [Default:CheckIn:D] Running Loop=1
2018-10-06T03:01:34.121Z,1538794894.121 [Default:CheckIn:D] Stopped
2018-10-06T03:01:34.121Z,1538794894.121 [Default:CheckIn:E] Running Loop=1
2018-10-06T03:01:34.551Z,1538794894.551 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2805.105729 min 
2018-10-06T03:01:34.551Z,1538794894.551 [Default:CheckIn:E] Stopped
2018-10-06T03:01:34.551Z,1538794894.551 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T03:01:34.551Z,1538794894.551 [Default:CheckIn] Stopped
2018-10-06T03:01:34.551Z,1538794894.551 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T03:01:34.552Z,1538794894.552 [Default:CheckIn](INFO): Running loop #272
2018-10-06T03:01:34.552Z,1538794894.552 [Default:CheckIn] Running Loop=272
2018-10-06T03:01:34.552Z,1538794894.552 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T03:01:34.552Z,1538794894.552 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T03:02:52.357Z,1538794972.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:02:52.357Z,1538794972.357 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2018-10-06T03:02:52.357Z,1538794972.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:02:52.359Z,1538794972.359 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:02:52.359Z,1538794972.359 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2018-10-06T03:02:52.359Z,1538794972.359 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:02:52.372Z,1538794972.372 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:02:52.372Z,1538794972.372 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:02:52.768Z,1538794972.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:02:52.768Z,1538794972.768 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2018-10-06T03:02:52.768Z,1538794972.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:02:52.768Z,1538794972.768 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2018-10-06T03:02:53.142Z,1538794973.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:02:53.142Z,1538794973.142 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:02:53.143Z,1538794973.143 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:02:53.143Z,1538794973.143 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:02:53.143Z,1538794973.143 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:02:53.144Z,1538794973.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:05:53.527Z,1538795153.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:05:53.528Z,1538795153.528 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2018-10-06T03:05:53.528Z,1538795153.528 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:05:53.538Z,1538795153.538 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:05:53.538Z,1538795153.538 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2018-10-06T03:05:53.538Z,1538795153.538 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:05:53.551Z,1538795153.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:05:53.552Z,1538795153.552 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:05:53.967Z,1538795153.967 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:05:53.967Z,1538795153.967 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2018-10-06T03:05:53.968Z,1538795153.968 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:05:53.968Z,1538795153.968 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2018-10-06T03:05:54.330Z,1538795154.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:05:54.330Z,1538795154.330 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:05:54.331Z,1538795154.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:05:54.331Z,1538795154.331 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:05:54.332Z,1538795154.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:05:54.332Z,1538795154.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:05:55.883Z,1538795155.883 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T03:05:55.883Z,1538795155.883 [NAL9602] Data Fault, FailCount= 5
2018-10-06T03:05:55.883Z,1538795155.883 [NAL9602](ERROR): Data Fault
2018-10-06T03:05:55.961Z,1538795155.961 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T03:05:55.961Z,1538795155.961 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-06T03:05:56.283Z,1538795156.283 [NAL9602](INFO): Powering down
2018-10-06T03:05:56.359Z,1538795156.359 [CBIT](INFO): Critical error at 20181006T030555
2018-10-06T03:06:36.778Z,1538795196.778 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T03:01:34.6Z
2018-10-06T03:06:36.779Z,1538795196.779 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T03:06:36.779Z,1538795196.779 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T03:06:41.686Z,1538795201.686 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0817.lzma
2018-10-06T03:06:42.473Z,1538795202.473 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0817.lzma.bak
2018-10-06T03:06:42.473Z,1538795202.473 [DataOverHttps](INFO): SBD MOMSN=8612127
2018-10-06T03:06:52.192Z,1538795212.192 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0818.lzma
2018-10-06T03:06:52.951Z,1538795212.951 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0818.lzma.bak
2018-10-06T03:06:52.951Z,1538795212.951 [DataOverHttps](INFO): SBD MOMSN=8612129
2018-10-06T03:06:53.939Z,1538795213.939 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T03:06:53.940Z,1538795213.940 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T03:06:53.940Z,1538795213.940 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T03:07:56.165Z,1538795276.165 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T03:07:56.165Z,1538795276.165 [NAL9602] No Fault, FailCount= 5
2018-10-06T03:07:56.507Z,1538795276.507 [NAL9602](INFO): Powering up NAL9602
2018-10-06T03:08:08.575Z,1538795288.575 [NAL9602](INFO): NAL9602 initialized
2018-10-06T03:08:54.379Z,1538795334.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:08:54.379Z,1538795334.379 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2018-10-06T03:08:54.379Z,1538795334.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:08:54.381Z,1538795334.381 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:08:54.382Z,1538795334.382 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2018-10-06T03:08:54.382Z,1538795334.382 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:08:54.398Z,1538795334.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:08:54.398Z,1538795334.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:08:54.791Z,1538795334.791 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:08:54.791Z,1538795334.791 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2018-10-06T03:08:54.792Z,1538795334.792 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:08:54.792Z,1538795334.792 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2018-10-06T03:08:55.169Z,1538795335.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:08:55.170Z,1538795335.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:08:55.170Z,1538795335.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:08:55.171Z,1538795335.171 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:08:55.171Z,1538795335.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:08:55.171Z,1538795335.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:11:54.360Z,1538795514.360 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T03:11:54.365Z,1538795514.365 [Default:CheckIn:C.Wait] Stopped
2018-10-06T03:11:54.365Z,1538795514.365 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T03:11:54.365Z,1538795514.365 [Default:CheckIn:D] Running Loop=1
2018-10-06T03:11:54.780Z,1538795514.780 [Default:CheckIn:D] Stopped
2018-10-06T03:11:54.780Z,1538795514.780 [Default:CheckIn:E] Running Loop=1
2018-10-06T03:11:55.144Z,1538795515.144 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2815.450260 min 
2018-10-06T03:11:55.144Z,1538795515.144 [Default:CheckIn:E] Stopped
2018-10-06T03:11:55.144Z,1538795515.144 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T03:11:55.144Z,1538795515.144 [Default:CheckIn] Stopped
2018-10-06T03:11:55.144Z,1538795515.144 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T03:11:55.144Z,1538795515.144 [Default:CheckIn](INFO): Running loop #273
2018-10-06T03:11:55.145Z,1538795515.145 [Default:CheckIn] Running Loop=273
2018-10-06T03:11:55.145Z,1538795515.145 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T03:11:55.145Z,1538795515.145 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T03:11:55.559Z,1538795515.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:11:55.559Z,1538795515.559 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2018-10-06T03:11:55.559Z,1538795515.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:11:55.566Z,1538795515.566 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:11:55.566Z,1538795515.566 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2018-10-06T03:11:55.566Z,1538795515.566 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:11:55.591Z,1538795515.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:11:55.592Z,1538795515.592 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:11:55.967Z,1538795515.967 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:11:55.967Z,1538795515.967 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2018-10-06T03:11:55.967Z,1538795515.967 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:11:55.968Z,1538795515.968 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2018-10-06T03:11:56.338Z,1538795516.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:11:56.338Z,1538795516.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:11:56.339Z,1538795516.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:11:56.339Z,1538795516.339 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:11:56.339Z,1538795516.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:11:56.340Z,1538795516.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:14:56.423Z,1538795696.423 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:14:56.423Z,1538795696.423 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2018-10-06T03:14:56.423Z,1538795696.423 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:14:56.430Z,1538795696.430 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:14:56.430Z,1538795696.430 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2018-10-06T03:14:56.430Z,1538795696.430 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:14:56.451Z,1538795696.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:14:56.452Z,1538795696.452 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:14:56.844Z,1538795696.844 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:14:56.844Z,1538795696.844 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2018-10-06T03:14:56.845Z,1538795696.845 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:14:56.845Z,1538795696.845 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2018-10-06T03:14:57.210Z,1538795697.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:14:57.210Z,1538795697.210 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:14:57.210Z,1538795697.210 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:14:57.211Z,1538795697.211 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:14:57.211Z,1538795697.211 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:14:57.212Z,1538795697.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:16:57.258Z,1538795817.258 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T03:11:55.1Z
2018-10-06T03:16:57.258Z,1538795817.258 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T03:16:57.258Z,1538795817.258 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T03:17:02.249Z,1538795822.249 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0820.lzma
2018-10-06T03:17:03.027Z,1538795823.027 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0820.lzma.bak
2018-10-06T03:17:03.027Z,1538795823.027 [DataOverHttps](INFO): SBD MOMSN=8612131
2018-10-06T03:17:12.229Z,1538795832.229 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20181004T041305/Express0821.lzma
2018-10-06T03:17:12.991Z,1538795832.991 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0821.lzma.bak
2018-10-06T03:17:12.991Z,1538795832.991 [DataOverHttps](INFO): SBD MOMSN=8612133
2018-10-06T03:17:13.994Z,1538795833.994 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T03:17:13.994Z,1538795833.994 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T03:17:13.994Z,1538795833.994 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T03:17:57.517Z,1538795877.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:17:57.517Z,1538795877.517 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2018-10-06T03:17:57.517Z,1538795877.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:17:57.519Z,1538795877.519 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:17:57.519Z,1538795877.519 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2018-10-06T03:17:57.519Z,1538795877.519 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:17:57.533Z,1538795877.533 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:17:57.533Z,1538795877.533 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:17:57.933Z,1538795877.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:17:57.933Z,1538795877.933 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2018-10-06T03:17:57.933Z,1538795877.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:17:57.933Z,1538795877.933 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2018-10-06T03:17:58.322Z,1538795878.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:17:58.322Z,1538795878.322 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:17:58.323Z,1538795878.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:17:58.323Z,1538795878.323 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:17:58.324Z,1538795878.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:17:58.324Z,1538795878.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:18:11.459Z,1538795891.459 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T03:18:11.459Z,1538795891.459 [NAL9602] Data Fault, FailCount= 1
2018-10-06T03:18:11.459Z,1538795891.459 [NAL9602](ERROR): Data Fault
2018-10-06T03:18:11.517Z,1538795891.517 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T03:18:11.859Z,1538795891.859 [NAL9602](INFO): Powering down
2018-10-06T03:18:12.743Z,1538795892.743 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T03:18:12.743Z,1538795892.743 [NAL9602] No Fault, FailCount= 1
2018-10-06T03:18:41.927Z,1538795921.927 [NAL9602](INFO): Powering up NAL9602
2018-10-06T03:18:52.727Z,1538795932.727 [NAL9602](INFO): NAL9602 initialized
2018-10-06T03:20:58.399Z,1538796058.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:20:58.399Z,1538796058.399 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2018-10-06T03:20:58.399Z,1538796058.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:20:58.405Z,1538796058.405 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:20:58.405Z,1538796058.405 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2018-10-06T03:20:58.405Z,1538796058.405 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:20:58.431Z,1538796058.431 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:20:58.431Z,1538796058.431 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:20:58.838Z,1538796058.838 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:20:58.838Z,1538796058.838 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2018-10-06T03:20:58.839Z,1538796058.839 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:20:58.839Z,1538796058.839 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2018-10-06T03:20:59.186Z,1538796059.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:20:59.186Z,1538796059.186 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:20:59.187Z,1538796059.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:20:59.187Z,1538796059.187 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:20:59.187Z,1538796059.187 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:20:59.188Z,1538796059.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:22:14.421Z,1538796134.421 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T03:22:14.422Z,1538796134.422 [Default:CheckIn:C.Wait] Stopped
2018-10-06T03:22:14.422Z,1538796134.422 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T03:22:14.422Z,1538796134.422 [Default:CheckIn:D] Running Loop=1
2018-10-06T03:22:14.820Z,1538796134.820 [Default:CheckIn:D] Stopped
2018-10-06T03:22:14.820Z,1538796134.820 [Default:CheckIn:E] Running Loop=1
2018-10-06T03:22:15.219Z,1538796135.219 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2825.784115 min 
2018-10-06T03:22:15.219Z,1538796135.219 [Default:CheckIn:E] Stopped
2018-10-06T03:22:15.219Z,1538796135.219 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T03:22:15.219Z,1538796135.219 [Default:CheckIn] Stopped
2018-10-06T03:22:15.219Z,1538796135.219 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T03:22:15.220Z,1538796135.220 [Default:CheckIn](INFO): Running loop #274
2018-10-06T03:22:15.220Z,1538796135.220 [Default:CheckIn] Running Loop=274
2018-10-06T03:22:15.220Z,1538796135.220 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T03:22:15.220Z,1538796135.220 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T03:23:46.688Z,1538796226.688 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffe, 15.880, -0.002, 0.000
2018-10-06T03:23:59.511Z,1538796239.511 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:23:59.511Z,1538796239.511 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2018-10-06T03:23:59.511Z,1538796239.511 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:23:59.517Z,1538796239.517 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:23:59.517Z,1538796239.517 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2018-10-06T03:23:59.518Z,1538796239.518 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:23:59.536Z,1538796239.536 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:23:59.536Z,1538796239.536 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:23:59.959Z,1538796239.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:23:59.959Z,1538796239.959 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2018-10-06T03:23:59.960Z,1538796239.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:23:59.960Z,1538796239.960 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2018-10-06T03:24:00.317Z,1538796240.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:24:00.318Z,1538796240.318 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:24:00.318Z,1538796240.318 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:24:00.319Z,1538796240.319 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:24:00.319Z,1538796240.319 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:24:00.319Z,1538796240.319 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:27:00.340Z,1538796420.340 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:27:00.340Z,1538796420.340 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2018-10-06T03:27:00.340Z,1538796420.340 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:27:00.342Z,1538796420.342 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:27:00.342Z,1538796420.342 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2018-10-06T03:27:00.342Z,1538796420.342 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:27:00.368Z,1538796420.368 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:27:00.368Z,1538796420.368 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:27:00.786Z,1538796420.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:27:00.786Z,1538796420.786 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2018-10-06T03:27:00.786Z,1538796420.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:27:00.786Z,1538796420.786 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2018-10-06T03:27:01.153Z,1538796421.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:27:01.153Z,1538796421.153 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:27:01.154Z,1538796421.154 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:27:01.154Z,1538796421.154 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:27:01.154Z,1538796421.154 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:27:01.155Z,1538796421.155 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:27:17.187Z,1538796437.187 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T03:22:15.2Z
2018-10-06T03:27:17.187Z,1538796437.187 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T03:27:17.187Z,1538796437.187 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T03:27:22.197Z,1538796442.197 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0823.lzma
2018-10-06T03:27:22.983Z,1538796442.983 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0823.lzma.bak
2018-10-06T03:27:22.983Z,1538796442.983 [DataOverHttps](INFO): SBD MOMSN=8612135
2018-10-06T03:27:32.392Z,1538796452.392 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0824.lzma
2018-10-06T03:27:33.159Z,1538796453.159 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0824.lzma.bak
2018-10-06T03:27:33.159Z,1538796453.159 [DataOverHttps](INFO): SBD MOMSN=8612137
2018-10-06T03:27:34.145Z,1538796454.145 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T03:27:34.146Z,1538796454.146 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T03:27:34.146Z,1538796454.146 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T03:28:55.487Z,1538796535.487 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T03:28:55.487Z,1538796535.487 [NAL9602] Data Fault, FailCount= 2
2018-10-06T03:28:55.487Z,1538796535.487 [NAL9602](ERROR): Data Fault
2018-10-06T03:28:55.579Z,1538796535.579 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T03:28:55.879Z,1538796535.879 [NAL9602](INFO): Powering down
2018-10-06T03:28:56.767Z,1538796536.767 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T03:28:56.767Z,1538796536.767 [NAL9602] No Fault, FailCount= 2
2018-10-06T03:29:25.991Z,1538796565.991 [NAL9602](INFO): Powering up NAL9602
2018-10-06T03:29:37.187Z,1538796577.187 [NAL9602](INFO): NAL9602 initialized
2018-10-06T03:30:01.335Z,1538796601.335 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:30:01.335Z,1538796601.335 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2018-10-06T03:30:01.335Z,1538796601.335 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:30:01.342Z,1538796601.342 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:30:01.342Z,1538796601.342 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2018-10-06T03:30:01.342Z,1538796601.342 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:30:01.363Z,1538796601.363 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:30:01.364Z,1538796601.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:30:01.739Z,1538796601.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:30:01.739Z,1538796601.739 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2018-10-06T03:30:01.740Z,1538796601.740 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:30:01.740Z,1538796601.740 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2018-10-06T03:30:02.127Z,1538796602.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:30:02.128Z,1538796602.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:30:02.128Z,1538796602.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:30:02.133Z,1538796602.133 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:30:02.133Z,1538796602.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:30:02.134Z,1538796602.134 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:32:34.367Z,1538796754.367 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T03:32:34.367Z,1538796754.367 [Default:CheckIn:C.Wait] Stopped
2018-10-06T03:32:34.367Z,1538796754.367 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T03:32:34.368Z,1538796754.368 [Default:CheckIn:D] Running Loop=1
2018-10-06T03:32:34.785Z,1538796754.785 [Default:CheckIn:D] Stopped
2018-10-06T03:32:34.785Z,1538796754.785 [Default:CheckIn:E] Running Loop=1
2018-10-06T03:32:35.167Z,1538796755.167 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2836.116927 min 
2018-10-06T03:32:35.167Z,1538796755.167 [Default:CheckIn:E] Stopped
2018-10-06T03:32:35.168Z,1538796755.168 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T03:32:35.168Z,1538796755.168 [Default:CheckIn] Stopped
2018-10-06T03:32:35.168Z,1538796755.168 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T03:32:35.168Z,1538796755.168 [Default:CheckIn](INFO): Running loop #275
2018-10-06T03:32:35.168Z,1538796755.168 [Default:CheckIn] Running Loop=275
2018-10-06T03:32:35.168Z,1538796755.168 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T03:32:35.168Z,1538796755.168 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T03:33:02.176Z,1538796782.176 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:33:02.177Z,1538796782.177 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2018-10-06T03:33:02.178Z,1538796782.178 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:33:02.180Z,1538796782.180 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:33:02.180Z,1538796782.180 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2018-10-06T03:33:02.180Z,1538796782.180 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:33:02.202Z,1538796782.202 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:33:02.203Z,1538796782.203 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:33:02.203Z,1538796782.203 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:33:02.203Z,1538796782.203 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:33:23.728Z,1538796803.728 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-06T03:37:36.952Z,1538797056.952 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T03:32:35.2Z
2018-10-06T03:37:36.952Z,1538797056.952 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T03:37:36.952Z,1538797056.952 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T03:37:41.911Z,1538797061.911 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0826.lzma
2018-10-06T03:37:42.688Z,1538797062.688 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0826.lzma.bak
2018-10-06T03:37:42.688Z,1538797062.688 [DataOverHttps](INFO): SBD MOMSN=8612139
2018-10-06T03:37:52.162Z,1538797072.162 [DataOverHttps](INFO): Sending 221 bytes from file Logs/20181004T041305/Express0827.lzma
2018-10-06T03:37:52.939Z,1538797072.939 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0827.lzma.bak
2018-10-06T03:37:52.939Z,1538797072.939 [DataOverHttps](INFO): SBD MOMSN=8612141
2018-10-06T03:37:53.921Z,1538797073.921 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T03:37:53.921Z,1538797073.921 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T03:37:53.921Z,1538797073.921 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T03:39:43.325Z,1538797183.325 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T03:39:43.325Z,1538797183.325 [NAL9602] Data Fault, FailCount= 3
2018-10-06T03:39:43.326Z,1538797183.326 [NAL9602](ERROR): Data Fault
2018-10-06T03:39:43.428Z,1538797183.428 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T03:39:43.507Z,1538797183.507 [NAL9602](INFO): Powering down
2018-10-06T03:39:44.310Z,1538797184.310 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T03:39:44.310Z,1538797184.310 [NAL9602] No Fault, FailCount= 3
2018-10-06T03:39:44.672Z,1538797184.672 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-06T03:40:13.847Z,1538797213.847 [NAL9602](INFO): Powering up NAL9602
2018-10-06T03:40:24.759Z,1538797224.759 [NAL9602](INFO): NAL9602 initialized
2018-10-06T03:42:05.667Z,1538797325.667 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-06T03:42:54.235Z,1538797374.235 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T03:42:54.235Z,1538797374.235 [Default:CheckIn:C.Wait] Stopped
2018-10-06T03:42:54.235Z,1538797374.235 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T03:42:54.235Z,1538797374.235 [Default:CheckIn:D] Running Loop=1
2018-10-06T03:42:54.644Z,1538797374.644 [Default:CheckIn:D] Stopped
2018-10-06T03:42:54.644Z,1538797374.644 [Default:CheckIn:E] Running Loop=1
2018-10-06T03:42:55.015Z,1538797375.015 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2846.447917 min 
2018-10-06T03:42:55.015Z,1538797375.015 [Default:CheckIn:E] Stopped
2018-10-06T03:42:55.015Z,1538797375.015 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T03:42:55.015Z,1538797375.015 [Default:CheckIn] Stopped
2018-10-06T03:42:55.016Z,1538797375.016 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T03:42:55.016Z,1538797375.016 [Default:CheckIn](INFO): Running loop #276
2018-10-06T03:42:55.016Z,1538797375.016 [Default:CheckIn] Running Loop=276
2018-10-06T03:42:55.016Z,1538797375.016 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T03:42:55.016Z,1538797375.016 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T03:47:57.401Z,1538797677.401 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T03:42:55.0Z
2018-10-06T03:47:57.401Z,1538797677.401 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T03:47:57.402Z,1538797677.402 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T03:47:58.699Z,1538797678.699 [RDI_Pathfinder](ERROR): Failed to parse::BI,-32768,-32768,-32768,-32768,V
2018-10-06T03:48:02.326Z,1538797682.326 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:48:02.326Z,1538797682.326 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2018-10-06T03:48:02.326Z,1538797682.326 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:48:02.326Z,1538797682.326 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2018-10-06T03:48:02.374Z,1538797682.374 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0829.lzma
2018-10-06T03:48:02.448Z,1538797682.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:48:02.453Z,1538797682.453 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:48:02.453Z,1538797682.453 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:48:02.454Z,1538797682.454 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:48:02.454Z,1538797682.454 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:48:02.455Z,1538797682.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:48:03.143Z,1538797683.143 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0829.lzma.bak
2018-10-06T03:48:03.143Z,1538797683.143 [DataOverHttps](INFO): SBD MOMSN=8612143
2018-10-06T03:48:08.690Z,1538797688.690 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.887, -0.007, 0.000
2018-10-06T03:48:13.682Z,1538797693.682 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0830.lzma
2018-10-06T03:48:14.458Z,1538797694.458 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0830.lzma.bak
2018-10-06T03:48:14.459Z,1538797694.459 [DataOverHttps](INFO): SBD MOMSN=8612145
2018-10-06T03:48:15.570Z,1538797695.570 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T03:48:15.570Z,1538797695.570 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T03:48:15.570Z,1538797695.570 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T03:49:30.865Z,1538797770.865 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.887,*-0.010,*0.000
2018-10-06T03:50:25.767Z,1538797825.767 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T03:50:25.767Z,1538797825.767 [NAL9602] Data Fault, FailCount= 4
2018-10-06T03:50:25.767Z,1538797825.767 [NAL9602](ERROR): Data Fault
2018-10-06T03:50:25.848Z,1538797825.848 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T03:50:26.161Z,1538797826.161 [NAL9602](INFO): Powering down
2018-10-06T03:50:27.028Z,1538797827.028 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T03:50:27.028Z,1538797827.028 [NAL9602] No Fault, FailCount= 4
2018-10-06T03:50:56.259Z,1538797856.259 [NAL9602](INFO): Powering up NAL9602
2018-10-06T03:51:02.701Z,1538797862.701 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:51:02.702Z,1538797862.702 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-10-06T03:51:02.702Z,1538797862.702 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:51:02.704Z,1538797862.704 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:51:02.704Z,1538797862.704 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-06T03:51:02.704Z,1538797862.704 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:51:02.741Z,1538797862.741 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:51:02.742Z,1538797862.742 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:51:03.110Z,1538797863.110 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:51:03.111Z,1538797863.111 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-10-06T03:51:03.111Z,1538797863.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:51:03.111Z,1538797863.111 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-06T03:51:03.507Z,1538797863.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:51:03.508Z,1538797863.508 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:51:03.508Z,1538797863.508 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:51:03.517Z,1538797863.517 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:51:03.517Z,1538797863.517 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:51:03.518Z,1538797863.518 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:51:07.463Z,1538797867.463 [NAL9602](INFO): NAL9602 initialized
2018-10-06T03:53:15.765Z,1538797995.765 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T03:53:15.766Z,1538797995.766 [Default:CheckIn:C.Wait] Stopped
2018-10-06T03:53:15.766Z,1538797995.766 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T03:53:15.766Z,1538797995.766 [Default:CheckIn:D] Running Loop=1
2018-10-06T03:53:16.163Z,1538797996.163 [Default:CheckIn:D] Stopped
2018-10-06T03:53:16.163Z,1538797996.163 [Default:CheckIn:E] Running Loop=1
2018-10-06T03:53:16.574Z,1538797996.574 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2856.806510 min 
2018-10-06T03:53:16.574Z,1538797996.574 [Default:CheckIn:E] Stopped
2018-10-06T03:53:16.574Z,1538797996.574 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T03:53:16.574Z,1538797996.574 [Default:CheckIn] Stopped
2018-10-06T03:53:16.575Z,1538797996.575 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T03:53:16.575Z,1538797996.575 [Default:CheckIn](INFO): Running loop #277
2018-10-06T03:53:16.575Z,1538797996.575 [Default:CheckIn] Running Loop=277
2018-10-06T03:53:16.575Z,1538797996.575 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T03:53:16.575Z,1538797996.575 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T03:54:03.847Z,1538798043.847 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:54:03.847Z,1538798043.847 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-10-06T03:54:03.847Z,1538798043.847 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:54:03.853Z,1538798043.853 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:54:03.853Z,1538798043.853 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-06T03:54:03.853Z,1538798043.853 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:54:03.875Z,1538798043.875 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:54:03.875Z,1538798043.875 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:54:04.270Z,1538798044.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:54:04.270Z,1538798044.270 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-10-06T03:54:04.271Z,1538798044.271 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:54:04.271Z,1538798044.271 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-06T03:54:04.657Z,1538798044.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:54:04.658Z,1538798044.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:54:04.658Z,1538798044.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:54:04.659Z,1538798044.659 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:54:04.659Z,1538798044.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:54:04.659Z,1538798044.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:54:29.939Z,1538798069.939 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-06T03:54:29.939Z,1538798069.939 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100520592883,35.0, -0.1,   .9,  0
2018-10-06T03:57:04.995Z,1538798224.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:57:04.995Z,1538798224.995 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-10-06T03:57:04.995Z,1538798224.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T03:57:04.997Z,1538798224.997 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T03:57:04.997Z,1538798224.997 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-06T03:57:04.997Z,1538798224.997 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T03:57:05.018Z,1538798225.018 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T03:57:05.019Z,1538798225.019 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T03:57:08.221Z,1538798228.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T03:57:08.221Z,1538798228.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-10-06T03:57:08.222Z,1538798228.222 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T03:57:08.222Z,1538798228.222 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-06T03:57:08.306Z,1538798228.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T03:57:08.306Z,1538798228.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:57:08.307Z,1538798228.307 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:57:08.307Z,1538798228.307 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T03:57:08.307Z,1538798228.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T03:57:08.308Z,1538798228.308 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T03:58:18.941Z,1538798298.941 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T03:53:16.6Z
2018-10-06T03:58:18.969Z,1538798298.969 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T03:58:18.969Z,1538798298.969 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T03:58:23.926Z,1538798303.926 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0832.lzma
2018-10-06T03:58:24.757Z,1538798304.757 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0832.lzma.bak
2018-10-06T03:58:24.757Z,1538798304.757 [DataOverHttps](INFO): SBD MOMSN=8612147
2018-10-06T03:58:33.865Z,1538798313.865 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-06T03:58:33.866Z,1538798313.866 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100521032983,35.0, -0.1,   0.0,144

2018-10-06T03:58:33.958Z,1538798313.958 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0833.lzma
2018-10-06T03:58:34.755Z,1538798314.755 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0833.lzma.bak
2018-10-06T03:58:34.755Z,1538798314.755 [DataOverHttps](INFO): SBD MOMSN=8612149
2018-10-06T03:58:35.912Z,1538798315.912 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T03:58:35.912Z,1538798315.912 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T03:58:35.912Z,1538798315.912 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T04:00:08.344Z,1538798408.344 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:00:08.345Z,1538798408.345 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-10-06T04:00:08.345Z,1538798408.345 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:00:08.347Z,1538798408.347 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:00:08.347Z,1538798408.347 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-06T04:00:08.347Z,1538798408.347 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:00:08.360Z,1538798408.360 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:00:08.360Z,1538798408.360 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:00:08.756Z,1538798408.756 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:00:08.756Z,1538798408.756 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-10-06T04:00:08.757Z,1538798408.757 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:00:08.757Z,1538798408.757 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-06T04:00:09.120Z,1538798409.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:00:09.121Z,1538798409.121 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:00:09.121Z,1538798409.121 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:00:09.122Z,1538798409.122 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:00:09.122Z,1538798409.122 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:00:09.123Z,1538798409.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:01:10.491Z,1538798470.491 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T04:01:10.491Z,1538798470.491 [NAL9602] Data Fault, FailCount= 5
2018-10-06T04:01:10.491Z,1538798470.491 [NAL9602](ERROR): Data Fault
2018-10-06T04:01:10.561Z,1538798470.561 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T04:01:10.562Z,1538798470.562 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-06T04:01:10.891Z,1538798470.891 [NAL9602](INFO): Powering down
2018-10-06T04:01:10.958Z,1538798470.958 [CBIT](INFO): Critical error at 20181006T040110
2018-10-06T04:03:09.503Z,1538798589.503 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:03:09.503Z,1538798589.503 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-10-06T04:03:09.503Z,1538798589.503 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:03:09.507Z,1538798589.507 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:03:09.508Z,1538798589.508 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-06T04:03:09.508Z,1538798589.508 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:03:09.562Z,1538798589.562 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:03:09.562Z,1538798589.562 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:03:09.935Z,1538798589.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:03:09.935Z,1538798589.935 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-10-06T04:03:09.936Z,1538798589.936 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:03:09.936Z,1538798589.936 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-06T04:03:10.297Z,1538798590.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:03:10.301Z,1538798590.301 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:03:10.302Z,1538798590.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:03:10.302Z,1538798590.302 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:03:10.302Z,1538798590.302 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:03:10.303Z,1538798590.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:03:10.755Z,1538798590.755 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T04:03:10.755Z,1538798590.755 [NAL9602] No Fault, FailCount= 5
2018-10-06T04:03:11.071Z,1538798591.071 [NAL9602](INFO): Powering up NAL9602
2018-10-06T04:03:22.357Z,1538798602.357 [NAL9602](INFO): NAL9602 initialized
2018-10-06T04:03:36.414Z,1538798616.414 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T04:03:36.414Z,1538798616.414 [Default:CheckIn:C.Wait] Stopped
2018-10-06T04:03:36.414Z,1538798616.414 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T04:03:36.414Z,1538798616.414 [Default:CheckIn:D] Running Loop=1
2018-10-06T04:03:36.785Z,1538798616.785 [Default:CheckIn:D] Stopped
2018-10-06T04:03:36.785Z,1538798616.785 [Default:CheckIn:E] Running Loop=1
2018-10-06T04:03:37.181Z,1538798617.181 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2867.150260 min 
2018-10-06T04:03:37.181Z,1538798617.181 [Default:CheckIn:E] Stopped
2018-10-06T04:03:37.181Z,1538798617.181 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T04:03:37.181Z,1538798617.181 [Default:CheckIn] Stopped
2018-10-06T04:03:37.182Z,1538798617.182 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T04:03:37.182Z,1538798617.182 [Default:CheckIn](INFO): Running loop #278
2018-10-06T04:03:37.182Z,1538798617.182 [Default:CheckIn] Running Loop=278
2018-10-06T04:03:37.182Z,1538798617.182 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T04:03:37.182Z,1538798617.182 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T04:06:10.387Z,1538798770.387 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:06:10.387Z,1538798770.387 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-10-06T04:06:10.387Z,1538798770.387 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:06:10.389Z,1538798770.389 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:06:10.389Z,1538798770.389 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-06T04:06:10.389Z,1538798770.389 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:06:10.403Z,1538798770.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:06:10.403Z,1538798770.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:06:10.798Z,1538798770.798 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:06:10.798Z,1538798770.798 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-10-06T04:06:10.799Z,1538798770.799 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:06:10.799Z,1538798770.799 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-06T04:06:11.166Z,1538798771.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:06:11.166Z,1538798771.166 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:06:11.167Z,1538798771.167 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:06:11.167Z,1538798771.167 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:06:11.168Z,1538798771.168 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:06:11.168Z,1538798771.168 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:08:05.650Z,1538798885.650 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,75809.87
2018-10-06T04:08:39.645Z,1538798919.645 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T04:03:37.2Z
2018-10-06T04:08:39.645Z,1538798919.645 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T04:08:39.645Z,1538798919.645 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T04:08:44.658Z,1538798924.658 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181004T041305/Courier0835.lzma
2018-10-06T04:08:45.435Z,1538798925.435 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0835.lzma.bak
2018-10-06T04:08:45.435Z,1538798925.435 [DataOverHttps](INFO): SBD MOMSN=8612151
2018-10-06T04:08:54.692Z,1538798934.692 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0836.lzma
2018-10-06T04:08:55.455Z,1538798935.455 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0836.lzma.bak
2018-10-06T04:08:55.455Z,1538798935.455 [DataOverHttps](INFO): SBD MOMSN=8612153
2018-10-06T04:08:56.462Z,1538798936.462 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T04:08:56.462Z,1538798936.462 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T04:08:56.462Z,1538798936.462 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T04:09:11.469Z,1538798951.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:09:11.469Z,1538798951.469 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-10-06T04:09:11.469Z,1538798951.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:09:11.471Z,1538798951.471 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:09:11.471Z,1538798951.471 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-06T04:09:11.471Z,1538798951.471 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:09:11.484Z,1538798951.484 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:09:11.484Z,1538798951.484 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:09:11.907Z,1538798951.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:09:11.907Z,1538798951.907 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-10-06T04:09:11.907Z,1538798951.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:09:11.908Z,1538798951.908 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-06T04:09:12.269Z,1538798952.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:09:12.270Z,1538798952.270 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:09:12.270Z,1538798952.270 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:09:12.270Z,1538798952.270 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:09:12.271Z,1538798952.271 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:09:12.271Z,1538798952.271 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:12:12.531Z,1538799132.531 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:12:12.531Z,1538799132.531 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-10-06T04:12:12.531Z,1538799132.531 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:12:12.533Z,1538799132.533 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:12:12.533Z,1538799132.533 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-06T04:12:12.533Z,1538799132.533 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:12:12.546Z,1538799132.546 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:12:12.547Z,1538799132.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:12:12.955Z,1538799132.955 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:12:12.955Z,1538799132.955 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-10-06T04:12:12.955Z,1538799132.955 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:12:12.955Z,1538799132.955 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-06T04:12:13.314Z,1538799133.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:12:13.315Z,1538799133.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:12:13.315Z,1538799133.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:12:13.316Z,1538799133.316 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:12:13.316Z,1538799133.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:12:13.316Z,1538799133.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:13:24.271Z,1538799204.271 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T04:13:24.271Z,1538799204.271 [NAL9602] Data Fault, FailCount= 1
2018-10-06T04:13:24.271Z,1538799204.271 [NAL9602](ERROR): Data Fault
2018-10-06T04:13:24.377Z,1538799204.377 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T04:13:24.667Z,1538799204.667 [NAL9602](INFO): Powering down
2018-10-06T04:13:25.534Z,1538799205.534 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T04:13:25.534Z,1538799205.534 [NAL9602] No Fault, FailCount= 1
2018-10-06T04:13:54.751Z,1538799234.751 [NAL9602](INFO): Powering up NAL9602
2018-10-06T04:13:56.777Z,1538799236.777 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T04:13:56.777Z,1538799236.777 [Default:CheckIn:C.Wait] Stopped
2018-10-06T04:13:56.777Z,1538799236.777 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T04:13:56.777Z,1538799236.777 [Default:CheckIn:D] Running Loop=1
2018-10-06T04:13:57.185Z,1538799237.185 [Default:CheckIn:D] Stopped
2018-10-06T04:13:57.185Z,1538799237.185 [Default:CheckIn:E] Running Loop=1
2018-10-06T04:13:57.593Z,1538799237.593 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2877.490365 min 
2018-10-06T04:13:57.594Z,1538799237.594 [Default:CheckIn:E] Stopped
2018-10-06T04:13:57.594Z,1538799237.594 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T04:13:57.594Z,1538799237.594 [Default:CheckIn] Stopped
2018-10-06T04:13:57.594Z,1538799237.594 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T04:13:57.594Z,1538799237.594 [Default:CheckIn](INFO): Running loop #279
2018-10-06T04:13:57.594Z,1538799237.594 [Default:CheckIn] Running Loop=279
2018-10-06T04:13:57.594Z,1538799237.594 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T04:13:57.595Z,1538799237.595 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T04:14:02.782Z,1538799242.782 [RDI_Pathfinder](ERROR): Failed to parse:
:B  +0.   +0.00,        +0.00,   0.00,76165.07
2018-10-06T04:14:05.947Z,1538799245.947 [NAL9602](INFO): NAL9602 initialized
2018-10-06T04:15:13.329Z,1538799313.329 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:15:13.329Z,1538799313.329 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-10-06T04:15:13.330Z,1538799313.330 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:15:13.338Z,1538799313.338 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:15:13.338Z,1538799313.338 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-06T04:15:13.338Z,1538799313.338 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:15:13.373Z,1538799313.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:15:13.373Z,1538799313.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:15:13.769Z,1538799313.769 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:15:13.769Z,1538799313.769 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-10-06T04:15:13.770Z,1538799313.770 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:15:13.770Z,1538799313.770 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-06T04:15:14.118Z,1538799314.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:15:14.118Z,1538799314.118 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:15:14.119Z,1538799314.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:15:14.119Z,1538799314.119 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:15:14.119Z,1538799314.119 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:15:14.120Z,1538799314.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:15:21.337Z,1538799321.337 [CBIT](IMPORTANT): Beginning ground fault scan
2018-10-06T04:15:34.714Z,1538799334.714 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.126937
CHAN A1 (24V): 0.003028
CHAN A2 (12V): -0.007333
CHAN A3 (5V): -0.002374
CHAN B0 (3.3V): 0.000422
CHAN B1 (3.15aV): 0.000151
CHAN B2 (3.15bV): 0.000354
CHAN B3 (GND): 0.002222
OPEN: 0.005233
Full Scale Calc: 4.765 mA, -1.589 mA
2018-10-06T04:17:32.064Z,1538799452.064 [RDI_Pathfinder](ERROR): only read 3 of 5 data items
2018-10-06T04:17:32.081Z,1538799452.081 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-3268,-32768,-32768,V
2018-10-06T04:18:14.229Z,1538799494.229 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:18:14.230Z,1538799494.230 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-10-06T04:18:14.230Z,1538799494.230 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:18:14.231Z,1538799494.231 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:18:14.232Z,1538799494.232 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-06T04:18:14.232Z,1538799494.232 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:18:14.262Z,1538799494.262 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:18:14.262Z,1538799494.262 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:18:14.683Z,1538799494.683 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:18:14.683Z,1538799494.683 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-10-06T04:18:14.683Z,1538799494.683 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:18:14.684Z,1538799494.684 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-06T04:18:15.010Z,1538799495.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:18:15.010Z,1538799495.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:18:15.011Z,1538799495.011 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:18:15.011Z,1538799495.011 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:18:15.012Z,1538799495.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:18:15.012Z,1538799495.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:18:30.717Z,1538799510.717 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.880,*-0.001,*0.000
2018-10-06T04:18:59.485Z,1538799539.485 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T04:13:57.6Z
2018-10-06T04:18:59.485Z,1538799539.485 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T04:18:59.486Z,1538799539.486 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T04:19:00.804Z,1538799540.804 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-06T04:19:04.472Z,1538799544.472 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0838.lzma
2018-10-06T04:19:05.239Z,1538799545.239 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0838.lzma.bak
2018-10-06T04:19:05.239Z,1538799545.239 [DataOverHttps](INFO): SBD MOMSN=8612155
2018-10-06T04:19:14.429Z,1538799554.429 [DataOverHttps](INFO): Sending 321 bytes from file Logs/20181004T041305/Express0839.lzma
2018-10-06T04:19:15.223Z,1538799555.223 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0839.lzma.bak
2018-10-06T04:19:15.223Z,1538799555.223 [DataOverHttps](INFO): SBD MOMSN=8612157
2018-10-06T04:19:16.179Z,1538799556.179 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-06T04:19:16.214Z,1538799556.214 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T04:19:16.214Z,1538799556.214 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T04:19:16.214Z,1538799556.214 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T04:21:15.183Z,1538799675.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:21:15.183Z,1538799675.183 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-10-06T04:21:15.183Z,1538799675.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:21:15.185Z,1538799675.185 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:21:15.185Z,1538799675.185 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-06T04:21:15.185Z,1538799675.185 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:21:15.212Z,1538799675.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:21:15.213Z,1538799675.213 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:21:15.639Z,1538799675.639 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:21:15.639Z,1538799675.639 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-10-06T04:21:15.640Z,1538799675.640 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:21:15.640Z,1538799675.640 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-06T04:21:15.969Z,1538799675.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:21:15.970Z,1538799675.970 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:21:15.970Z,1538799675.970 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:21:15.971Z,1538799675.971 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:21:15.971Z,1538799675.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:21:15.971Z,1538799675.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:23:29.912Z,1538799809.912 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.894,*-0.000,*0.000
2018-10-06T04:24:07.583Z,1538799847.583 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T04:24:07.583Z,1538799847.583 [NAL9602] Data Fault, FailCount= 2
2018-10-06T04:24:07.583Z,1538799847.583 [NAL9602](ERROR): Data Fault
2018-10-06T04:24:07.686Z,1538799847.686 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T04:24:08.000Z,1538799848.000 [NAL9602](INFO): Powering down
2018-10-06T04:24:08.847Z,1538799848.847 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T04:24:08.847Z,1538799848.847 [NAL9602] No Fault, FailCount= 2
2018-10-06T04:24:16.023Z,1538799856.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:24:16.023Z,1538799856.023 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-10-06T04:24:16.023Z,1538799856.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:24:16.025Z,1538799856.025 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:24:16.025Z,1538799856.025 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-06T04:24:16.025Z,1538799856.025 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:24:16.038Z,1538799856.038 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:24:16.038Z,1538799856.038 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:24:16.461Z,1538799856.461 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T04:24:16.462Z,1538799856.462 [Default:CheckIn:C.Wait] Stopped
2018-10-06T04:24:16.462Z,1538799856.462 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T04:24:16.462Z,1538799856.462 [Default:CheckIn:D] Running Loop=1
2018-10-06T04:24:16.473Z,1538799856.473 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:24:16.473Z,1538799856.473 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-10-06T04:24:16.474Z,1538799856.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:24:16.474Z,1538799856.474 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-06T04:24:16.818Z,1538799856.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:24:16.819Z,1538799856.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:24:16.823Z,1538799856.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:24:16.823Z,1538799856.823 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:24:16.824Z,1538799856.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:24:16.824Z,1538799856.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:24:16.826Z,1538799856.826 [Default:CheckIn:D] Stopped
2018-10-06T04:24:16.826Z,1538799856.826 [Default:CheckIn:E] Running Loop=1
2018-10-06T04:24:17.232Z,1538799857.232 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2887.817708 min 
2018-10-06T04:24:17.233Z,1538799857.233 [Default:CheckIn:E] Stopped
2018-10-06T04:24:17.233Z,1538799857.233 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T04:24:17.233Z,1538799857.233 [Default:CheckIn] Stopped
2018-10-06T04:24:17.233Z,1538799857.233 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T04:24:17.233Z,1538799857.233 [Default:CheckIn](INFO): Running loop #280
2018-10-06T04:24:17.233Z,1538799857.233 [Default:CheckIn] Running Loop=280
2018-10-06T04:24:17.234Z,1538799857.234 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T04:24:17.234Z,1538799857.234 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T04:24:38.068Z,1538799878.068 [NAL9602](INFO): Powering up NAL9602
2018-10-06T04:24:49.255Z,1538799889.255 [NAL9602](INFO): NAL9602 initialized
2018-10-06T04:27:17.007Z,1538800037.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:27:17.007Z,1538800037.007 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-10-06T04:27:17.007Z,1538800037.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:27:17.025Z,1538800037.025 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:27:17.025Z,1538800037.025 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-06T04:27:17.025Z,1538800037.025 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:27:17.043Z,1538800037.043 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:27:17.043Z,1538800037.043 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:27:17.442Z,1538800037.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:27:17.442Z,1538800037.442 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-10-06T04:27:17.443Z,1538800037.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:27:17.443Z,1538800037.443 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-06T04:27:17.794Z,1538800037.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:27:17.794Z,1538800037.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:27:17.794Z,1538800037.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:27:17.795Z,1538800037.795 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:27:17.795Z,1538800037.795 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:27:17.796Z,1538800037.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:29:19.757Z,1538800159.757 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T04:24:17.2Z
2018-10-06T04:29:19.757Z,1538800159.757 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T04:29:19.757Z,1538800159.757 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T04:29:24.678Z,1538800164.678 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0841.lzma
2018-10-06T04:29:25.476Z,1538800165.476 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0841.lzma.bak
2018-10-06T04:29:25.476Z,1538800165.476 [DataOverHttps](INFO): SBD MOMSN=8612159
2018-10-06T04:29:37.565Z,1538800177.565 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0842.lzma
2018-10-06T04:29:38.143Z,1538800178.143 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0842.lzma.bak
2018-10-06T04:29:38.144Z,1538800178.144 [DataOverHttps](INFO): SBD MOMSN=8612161
2018-10-06T04:29:39.130Z,1538800179.130 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T04:29:39.130Z,1538800179.130 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T04:29:39.131Z,1538800179.131 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T04:30:18.512Z,1538800218.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:30:18.512Z,1538800218.512 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-10-06T04:30:18.512Z,1538800218.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:30:18.514Z,1538800218.514 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:30:18.514Z,1538800218.514 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-06T04:30:18.514Z,1538800218.514 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:30:18.528Z,1538800218.528 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:30:18.528Z,1538800218.528 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:30:18.657Z,1538800218.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:30:18.658Z,1538800218.658 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-10-06T04:30:18.658Z,1538800218.658 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:30:18.658Z,1538800218.658 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-06T04:30:19.005Z,1538800219.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:30:19.006Z,1538800219.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:30:19.006Z,1538800219.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:30:19.007Z,1538800219.007 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:30:19.007Z,1538800219.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:30:19.007Z,1538800219.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:33:19.171Z,1538800399.171 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:33:19.171Z,1538800399.171 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-10-06T04:33:19.171Z,1538800399.171 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:33:19.173Z,1538800399.173 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:33:19.193Z,1538800399.193 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-06T04:33:19.193Z,1538800399.193 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:33:19.216Z,1538800399.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:33:19.216Z,1538800399.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:33:19.615Z,1538800399.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:33:19.615Z,1538800399.615 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-10-06T04:33:19.615Z,1538800399.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:33:19.616Z,1538800399.616 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-06T04:33:19.996Z,1538800399.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:33:19.996Z,1538800399.996 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:33:19.997Z,1538800399.997 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:33:19.997Z,1538800399.997 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:33:19.998Z,1538800399.998 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:33:19.998Z,1538800399.998 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:34:39.415Z,1538800479.415 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T04:34:39.416Z,1538800479.416 [Default:CheckIn:C.Wait] Stopped
2018-10-06T04:34:39.416Z,1538800479.416 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T04:34:39.416Z,1538800479.416 [Default:CheckIn:D] Running Loop=1
2018-10-06T04:34:39.841Z,1538800479.841 [Default:CheckIn:D] Stopped
2018-10-06T04:34:39.841Z,1538800479.841 [Default:CheckIn:E] Running Loop=1
2018-10-06T04:34:40.229Z,1538800480.229 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2898.201042 min 
2018-10-06T04:34:40.229Z,1538800480.229 [Default:CheckIn:E] Stopped
2018-10-06T04:34:40.229Z,1538800480.229 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T04:34:40.230Z,1538800480.230 [Default:CheckIn] Stopped
2018-10-06T04:34:40.230Z,1538800480.230 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T04:34:40.230Z,1538800480.230 [Default:CheckIn](INFO): Running loop #281
2018-10-06T04:34:40.230Z,1538800480.230 [Default:CheckIn] Running Loop=281
2018-10-06T04:34:40.230Z,1538800480.230 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T04:34:40.230Z,1538800480.230 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T04:34:50.174Z,1538800490.174 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T04:34:50.174Z,1538800490.174 [NAL9602] Data Fault, FailCount= 3
2018-10-06T04:34:50.174Z,1538800490.174 [NAL9602](ERROR): Data Fault
2018-10-06T04:34:50.237Z,1538800490.237 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T04:34:50.566Z,1538800490.566 [NAL9602](INFO): Powering down
2018-10-06T04:34:51.428Z,1538800491.428 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T04:34:51.428Z,1538800491.428 [NAL9602] No Fault, FailCount= 3
2018-10-06T04:35:20.791Z,1538800520.791 [NAL9602](INFO): Powering up NAL9602
2018-10-06T04:35:34.786Z,1538800534.786 [NAL9602](INFO): NAL9602 initialized
2018-10-06T04:36:20.295Z,1538800580.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:36:20.295Z,1538800580.295 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-10-06T04:36:20.295Z,1538800580.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:36:20.313Z,1538800580.313 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:36:20.313Z,1538800580.313 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-06T04:36:20.313Z,1538800580.313 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:36:20.335Z,1538800580.335 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:36:20.336Z,1538800580.336 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:36:20.751Z,1538800580.751 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:36:20.751Z,1538800580.751 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-10-06T04:36:20.752Z,1538800580.752 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:36:20.752Z,1538800580.752 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-06T04:36:21.122Z,1538800581.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:36:21.122Z,1538800581.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:36:21.123Z,1538800581.123 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:36:21.123Z,1538800581.123 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:36:21.123Z,1538800581.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:36:21.124Z,1538800581.124 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:39:21.344Z,1538800761.344 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:39:21.344Z,1538800761.344 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-10-06T04:39:21.344Z,1538800761.344 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:39:21.350Z,1538800761.350 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:39:21.350Z,1538800761.350 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-06T04:39:21.350Z,1538800761.350 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:39:21.376Z,1538800761.376 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:39:21.376Z,1538800761.376 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:39:21.790Z,1538800761.790 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:39:21.790Z,1538800761.790 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-10-06T04:39:21.791Z,1538800761.791 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:39:21.791Z,1538800761.791 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-06T04:39:22.131Z,1538800762.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:39:22.132Z,1538800762.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:39:22.132Z,1538800762.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:39:22.133Z,1538800762.133 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:39:22.133Z,1538800762.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:39:22.134Z,1538800762.134 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:39:42.176Z,1538800782.176 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T04:34:40.2Z
2018-10-06T04:39:42.176Z,1538800782.176 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T04:39:42.176Z,1538800782.176 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T04:39:47.277Z,1538800787.277 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0844.lzma
2018-10-06T04:39:48.063Z,1538800788.063 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0844.lzma.bak
2018-10-06T04:39:48.063Z,1538800788.063 [DataOverHttps](INFO): SBD MOMSN=8612163
2018-10-06T04:39:57.348Z,1538800797.348 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0845.lzma
2018-10-06T04:39:58.114Z,1538800798.114 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0845.lzma.bak
2018-10-06T04:39:58.114Z,1538800798.114 [DataOverHttps](INFO): SBD MOMSN=8612165
2018-10-06T04:39:59.138Z,1538800799.138 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T04:39:59.139Z,1538800799.139 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T04:39:59.139Z,1538800799.139 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T04:40:54.791Z,1538800854.791 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-06T04:42:23.820Z,1538800943.820 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:42:23.820Z,1538800943.820 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-10-06T04:42:23.820Z,1538800943.820 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:42:23.822Z,1538800943.822 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:42:23.822Z,1538800943.822 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-06T04:42:23.822Z,1538800943.822 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:42:23.868Z,1538800943.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:42:23.868Z,1538800943.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:42:23.983Z,1538800943.983 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:42:23.983Z,1538800943.983 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-10-06T04:42:23.983Z,1538800943.983 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:42:23.983Z,1538800943.983 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-06T04:42:24.358Z,1538800944.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:42:24.359Z,1538800944.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:42:24.359Z,1538800944.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:42:24.359Z,1538800944.359 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:42:24.360Z,1538800944.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:42:24.360Z,1538800944.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:44:59.619Z,1538801099.619 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T04:44:59.620Z,1538801099.620 [Default:CheckIn:C.Wait] Stopped
2018-10-06T04:44:59.620Z,1538801099.620 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T04:44:59.620Z,1538801099.620 [Default:CheckIn:D] Running Loop=1
2018-10-06T04:45:00.017Z,1538801100.017 [Default:CheckIn:D] Stopped
2018-10-06T04:45:00.017Z,1538801100.017 [Default:CheckIn:E] Running Loop=1
2018-10-06T04:45:00.421Z,1538801100.421 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2908.537500 min 
2018-10-06T04:45:00.421Z,1538801100.421 [Default:CheckIn:E] Stopped
2018-10-06T04:45:00.421Z,1538801100.421 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T04:45:00.422Z,1538801100.422 [Default:CheckIn] Stopped
2018-10-06T04:45:00.422Z,1538801100.422 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T04:45:00.422Z,1538801100.422 [Default:CheckIn](INFO): Running loop #282
2018-10-06T04:45:00.422Z,1538801100.422 [Default:CheckIn] Running Loop=282
2018-10-06T04:45:00.422Z,1538801100.422 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T04:45:00.422Z,1538801100.422 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T04:45:24.519Z,1538801124.519 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:45:24.519Z,1538801124.519 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-10-06T04:45:24.519Z,1538801124.519 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:45:24.525Z,1538801124.525 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:45:24.525Z,1538801124.525 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-06T04:45:24.525Z,1538801124.525 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:45:24.546Z,1538801124.546 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:45:24.547Z,1538801124.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:45:24.926Z,1538801124.926 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:45:24.926Z,1538801124.926 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-10-06T04:45:24.927Z,1538801124.927 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:45:24.927Z,1538801124.927 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-06T04:45:25.335Z,1538801125.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:45:25.336Z,1538801125.336 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:45:25.336Z,1538801125.336 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:45:25.337Z,1538801125.337 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:45:25.337Z,1538801125.337 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:45:25.338Z,1538801125.338 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:45:37.267Z,1538801137.267 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T04:45:37.267Z,1538801137.267 [NAL9602] Data Fault, FailCount= 4
2018-10-06T04:45:37.267Z,1538801137.267 [NAL9602](ERROR): Data Fault
2018-10-06T04:45:37.362Z,1538801137.362 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T04:45:37.671Z,1538801137.671 [NAL9602](INFO): Powering down
2018-10-06T04:45:38.554Z,1538801138.554 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T04:45:38.554Z,1538801138.554 [NAL9602] No Fault, FailCount= 4
2018-10-06T04:45:56.589Z,1538801156.589 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-06T04:46:07.763Z,1538801167.763 [NAL9602](INFO): Powering up NAL9602
2018-10-06T04:46:18.967Z,1538801178.967 [NAL9602](INFO): NAL9602 initialized
2018-10-06T04:47:14.327Z,1538801234.327 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-06T04:47:14.327Z,1538801234.327 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.0  +0.00,   0.00,78141.51
2018-10-06T04:48:25.715Z,1538801305.715 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:48:25.715Z,1538801305.715 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-10-06T04:48:25.715Z,1538801305.715 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:48:25.717Z,1538801305.717 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:48:25.718Z,1538801305.718 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-06T04:48:25.718Z,1538801305.718 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:48:25.731Z,1538801305.731 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:48:25.731Z,1538801305.731 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:48:26.131Z,1538801306.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:48:26.131Z,1538801306.131 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-10-06T04:48:26.131Z,1538801306.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:48:26.131Z,1538801306.131 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-06T04:48:26.512Z,1538801306.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:48:26.513Z,1538801306.513 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:48:26.513Z,1538801306.513 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:48:26.514Z,1538801306.514 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:48:26.514Z,1538801306.514 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:48:26.515Z,1538801306.515 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:49:19.837Z,1538801359.837 [RDI_Pathfinder](ERROR): only read 4 of 5 data items
2018-10-06T04:49:19.837Z,1538801359.837 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768-32768,-32768,-32768,V
2018-10-06T04:50:02.325Z,1538801402.325 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T04:45:00.4Z
2018-10-06T04:50:02.325Z,1538801402.325 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T04:50:02.325Z,1538801402.325 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T04:50:03.592Z,1538801403.592 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,        +0.00,   0.00,78308.20
2018-10-06T04:50:07.254Z,1538801407.254 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181004T041305/Courier0847.lzma
2018-10-06T04:50:08.040Z,1538801408.040 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0847.lzma.bak
2018-10-06T04:50:08.040Z,1538801408.040 [DataOverHttps](INFO): SBD MOMSN=8612167
2018-10-06T04:50:17.437Z,1538801417.437 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0848.lzma
2018-10-06T04:50:18.203Z,1538801418.203 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0848.lzma.bak
2018-10-06T04:50:18.203Z,1538801418.203 [DataOverHttps](INFO): SBD MOMSN=8612169
2018-10-06T04:50:19.420Z,1538801419.420 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T04:50:19.420Z,1538801419.420 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T04:50:19.420Z,1538801419.420 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T04:51:26.883Z,1538801486.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:51:26.883Z,1538801486.883 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-10-06T04:51:26.883Z,1538801486.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:51:26.901Z,1538801486.901 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:51:26.901Z,1538801486.901 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-10-06T04:51:26.901Z,1538801486.901 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:51:26.927Z,1538801486.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:51:26.927Z,1538801486.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:51:27.327Z,1538801487.327 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:51:27.328Z,1538801487.328 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-10-06T04:51:27.328Z,1538801487.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:51:27.328Z,1538801487.328 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-10-06T04:51:27.704Z,1538801487.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:51:27.713Z,1538801487.713 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:51:27.714Z,1538801487.714 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:51:27.714Z,1538801487.714 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:51:27.714Z,1538801487.714 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:51:27.715Z,1538801487.715 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:51:34.600Z,1538801494.600 [RDI_Pathfinder](ERROR): Failed to parse:

2018-10-06T04:54:29.680Z,1538801669.680 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:54:29.680Z,1538801669.680 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-10-06T04:54:29.680Z,1538801669.680 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:54:29.682Z,1538801669.682 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:54:29.682Z,1538801669.682 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-10-06T04:54:29.682Z,1538801669.682 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:54:29.695Z,1538801669.695 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:54:29.695Z,1538801669.695 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:54:29.827Z,1538801669.827 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:54:29.827Z,1538801669.827 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-10-06T04:54:29.828Z,1538801669.828 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:54:29.828Z,1538801669.828 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-10-06T04:54:30.183Z,1538801670.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:54:30.184Z,1538801670.184 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:54:30.184Z,1538801670.184 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:54:30.184Z,1538801670.184 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:54:30.185Z,1538801670.185 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:54:30.185Z,1538801670.185 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:55:19.852Z,1538801719.852 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T04:55:19.866Z,1538801719.866 [Default:CheckIn:C.Wait] Stopped
2018-10-06T04:55:19.866Z,1538801719.866 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T04:55:19.867Z,1538801719.867 [Default:CheckIn:D] Running Loop=1
2018-10-06T04:55:20.245Z,1538801720.245 [Default:CheckIn:D] Stopped
2018-10-06T04:55:20.245Z,1538801720.245 [Default:CheckIn:E] Running Loop=1
2018-10-06T04:55:20.648Z,1538801720.648 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2918.874479 min 
2018-10-06T04:55:20.653Z,1538801720.653 [Default:CheckIn:E] Stopped
2018-10-06T04:55:20.654Z,1538801720.654 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T04:55:20.654Z,1538801720.654 [Default:CheckIn] Stopped
2018-10-06T04:55:20.654Z,1538801720.654 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T04:55:20.655Z,1538801720.655 [Default:CheckIn](INFO): Running loop #283
2018-10-06T04:55:20.655Z,1538801720.655 [Default:CheckIn] Running Loop=283
2018-10-06T04:55:20.655Z,1538801720.655 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T04:55:20.655Z,1538801720.655 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T04:56:20.011Z,1538801780.011 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T04:56:20.011Z,1538801780.011 [NAL9602] Data Fault, FailCount= 5
2018-10-06T04:56:20.011Z,1538801780.011 [NAL9602](ERROR): Data Fault
2018-10-06T04:56:20.112Z,1538801780.112 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T04:56:20.113Z,1538801780.113 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-06T04:56:20.403Z,1538801780.403 [NAL9602](INFO): Powering down
2018-10-06T04:56:20.483Z,1538801780.483 [CBIT](INFO): Critical error at 20181006T045620
2018-10-06T04:57:30.197Z,1538801850.197 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:57:30.197Z,1538801850.197 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-10-06T04:57:30.197Z,1538801850.197 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T04:57:30.199Z,1538801850.199 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T04:57:30.199Z,1538801850.199 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-10-06T04:57:30.199Z,1538801850.199 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T04:57:30.212Z,1538801850.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T04:57:30.212Z,1538801850.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T04:57:30.644Z,1538801850.644 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T04:57:30.644Z,1538801850.644 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-10-06T04:57:30.649Z,1538801850.649 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T04:57:30.649Z,1538801850.649 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-10-06T04:57:31.008Z,1538801851.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T04:57:31.008Z,1538801851.008 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:57:31.013Z,1538801851.013 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:57:31.013Z,1538801851.013 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T04:57:31.014Z,1538801851.014 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T04:57:31.014Z,1538801851.014 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T04:58:20.284Z,1538801900.284 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T04:58:20.284Z,1538801900.284 [NAL9602] No Fault, FailCount= 5
2018-10-06T04:58:20.657Z,1538801900.657 [NAL9602](INFO): Powering up NAL9602
2018-10-06T04:58:29.864Z,1538801909.864 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.887,*-0.007,*0.000
2018-10-06T04:58:31.831Z,1538801911.831 [NAL9602](INFO): NAL9602 initialized
2018-10-06T05:00:22.506Z,1538802022.506 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T04:55:20.7Z
2018-10-06T05:00:22.506Z,1538802022.506 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T05:00:22.506Z,1538802022.506 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T05:00:27.492Z,1538802027.492 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181004T041305/Courier0850.lzma
2018-10-06T05:00:28.282Z,1538802028.282 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0850.lzma.bak
2018-10-06T05:00:28.282Z,1538802028.282 [DataOverHttps](INFO): SBD MOMSN=8612171
2018-10-06T05:00:32.541Z,1538802032.541 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:00:32.541Z,1538802032.541 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-10-06T05:00:32.541Z,1538802032.541 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:00:32.543Z,1538802032.543 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:00:32.543Z,1538802032.543 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-10-06T05:00:32.543Z,1538802032.543 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:00:32.556Z,1538802032.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:00:32.556Z,1538802032.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:00:32.705Z,1538802032.705 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:00:32.705Z,1538802032.705 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-10-06T05:00:32.706Z,1538802032.706 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:00:32.706Z,1538802032.706 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-10-06T05:00:33.022Z,1538802033.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:00:33.022Z,1538802033.022 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:00:33.023Z,1538802033.023 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:00:33.023Z,1538802033.023 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:00:33.023Z,1538802033.023 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:00:33.024Z,1538802033.024 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:00:37.487Z,1538802037.487 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0851.lzma
2018-10-06T05:00:42.555Z,1538802042.555 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0851.lzma.bak
2018-10-06T05:00:42.556Z,1538802042.556 [DataOverHttps](INFO): SBD MOMSN=8612173
2018-10-06T05:00:43.344Z,1538802043.344 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T05:00:43.345Z,1538802043.345 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T05:00:43.345Z,1538802043.345 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T05:03:33.343Z,1538802213.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:03:33.343Z,1538802213.343 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-10-06T05:03:33.344Z,1538802213.344 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:03:33.366Z,1538802213.366 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:03:33.366Z,1538802213.366 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-10-06T05:03:33.366Z,1538802213.366 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:03:33.395Z,1538802213.395 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:03:33.396Z,1538802213.396 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:03:33.758Z,1538802213.758 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:03:33.758Z,1538802213.758 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-10-06T05:03:33.759Z,1538802213.759 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:03:33.759Z,1538802213.759 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-10-06T05:03:34.122Z,1538802214.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:03:34.122Z,1538802214.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:03:34.123Z,1538802214.123 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:03:34.123Z,1538802214.123 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:03:34.123Z,1538802214.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:03:34.124Z,1538802214.124 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:05:43.737Z,1538802343.737 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T05:05:43.737Z,1538802343.737 [Default:CheckIn:C.Wait] Stopped
2018-10-06T05:05:43.737Z,1538802343.737 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T05:05:43.737Z,1538802343.737 [Default:CheckIn:D] Running Loop=1
2018-10-06T05:05:44.153Z,1538802344.153 [Default:CheckIn:D] Stopped
2018-10-06T05:05:44.153Z,1538802344.153 [Default:CheckIn:E] Running Loop=1
2018-10-06T05:05:44.579Z,1538802344.579 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2929.272917 min 
2018-10-06T05:05:44.579Z,1538802344.579 [Default:CheckIn:E] Stopped
2018-10-06T05:05:44.579Z,1538802344.579 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T05:05:44.579Z,1538802344.579 [Default:CheckIn] Stopped
2018-10-06T05:05:44.580Z,1538802344.580 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T05:05:44.580Z,1538802344.580 [Default:CheckIn](INFO): Running loop #284
2018-10-06T05:05:44.580Z,1538802344.580 [Default:CheckIn] Running Loop=284
2018-10-06T05:05:44.580Z,1538802344.580 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T05:05:44.580Z,1538802344.580 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T05:06:34.284Z,1538802394.284 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:06:34.285Z,1538802394.285 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-10-06T05:06:34.289Z,1538802394.289 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:06:34.291Z,1538802394.291 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:06:34.291Z,1538802394.291 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-10-06T05:06:34.291Z,1538802394.291 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:06:34.320Z,1538802394.320 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:06:34.320Z,1538802394.320 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:06:34.684Z,1538802394.684 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:06:34.684Z,1538802394.684 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-10-06T05:06:34.689Z,1538802394.689 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:06:34.689Z,1538802394.689 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-10-06T05:06:35.056Z,1538802395.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:06:35.056Z,1538802395.056 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:06:35.057Z,1538802395.057 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:06:35.057Z,1538802395.057 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:06:35.057Z,1538802395.057 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:06:35.058Z,1538802395.058 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:08:33.295Z,1538802513.295 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T05:08:33.295Z,1538802513.295 [NAL9602] Data Fault, FailCount= 1
2018-10-06T05:08:33.295Z,1538802513.295 [NAL9602](ERROR): Data Fault
2018-10-06T05:08:33.378Z,1538802513.378 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T05:08:33.679Z,1538802513.679 [NAL9602](INFO): Powering down
2018-10-06T05:08:34.543Z,1538802514.543 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T05:08:34.543Z,1538802514.543 [NAL9602] No Fault, FailCount= 1
2018-10-06T05:09:03.771Z,1538802543.771 [NAL9602](INFO): Powering up NAL9602
2018-10-06T05:09:14.971Z,1538802554.971 [NAL9602](INFO): NAL9602 initialized
2018-10-06T05:09:36.195Z,1538802576.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:09:36.195Z,1538802576.195 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-10-06T05:09:36.195Z,1538802576.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:09:36.197Z,1538802576.197 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:09:36.197Z,1538802576.197 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-10-06T05:09:36.197Z,1538802576.197 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:09:36.210Z,1538802576.210 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:09:36.210Z,1538802576.210 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:09:36.404Z,1538802576.404 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:09:36.404Z,1538802576.404 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-10-06T05:09:36.409Z,1538802576.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:09:36.409Z,1538802576.409 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-10-06T05:09:36.669Z,1538802576.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:09:36.669Z,1538802576.669 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:09:36.670Z,1538802576.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:09:36.670Z,1538802576.670 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:09:36.670Z,1538802576.670 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:09:36.671Z,1538802576.671 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:09:50.679Z,1538802590.679 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for altitude
2018-10-06T05:09:50.680Z,1538802590.680 [RDI_Pathfinder](ERROR): Failed to parse:
:BD,        +0.00,        +0.00,   0.000
2018-10-06T05:10:46.766Z,1538802646.766 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T05:05:44.6Z
2018-10-06T05:10:46.766Z,1538802646.766 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T05:10:46.766Z,1538802646.766 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T05:10:51.700Z,1538802651.700 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0853.lzma
2018-10-06T05:10:52.488Z,1538802652.488 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0853.lzma.bak
2018-10-06T05:10:52.488Z,1538802652.488 [DataOverHttps](INFO): SBD MOMSN=8612175
2018-10-06T05:10:52.539Z,1538802652.539 [RDI_Pathfinder](ERROR): Failed to parse:
:BE,-32768,-32768,-32768,V
2018-10-06T05:11:01.721Z,1538802661.721 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0854.lzma
2018-10-06T05:11:02.491Z,1538802662.491 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0854.lzma.bak
2018-10-06T05:11:02.491Z,1538802662.491 [DataOverHttps](INFO): SBD MOMSN=8612177
2018-10-06T05:11:02.559Z,1538802662.559 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd,*15.887,*-0.008,*0.000
2018-10-06T05:11:03.513Z,1538802663.513 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T05:11:03.513Z,1538802663.513 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T05:11:03.514Z,1538802663.514 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T05:12:36.695Z,1538802756.695 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:12:36.695Z,1538802756.695 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-10-06T05:12:36.695Z,1538802756.695 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:12:36.697Z,1538802756.697 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:12:36.698Z,1538802756.698 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-10-06T05:12:36.698Z,1538802756.698 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:12:36.743Z,1538802756.743 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:12:36.744Z,1538802756.744 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:12:37.107Z,1538802757.107 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:12:37.107Z,1538802757.107 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-10-06T05:12:37.108Z,1538802757.108 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:12:37.108Z,1538802757.108 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-10-06T05:12:37.493Z,1538802757.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:12:37.494Z,1538802757.494 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:12:37.494Z,1538802757.494 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:12:37.495Z,1538802757.495 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:12:37.495Z,1538802757.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:12:37.495Z,1538802757.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:15:37.647Z,1538802937.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:15:37.647Z,1538802937.647 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-10-06T05:15:37.647Z,1538802937.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:15:37.653Z,1538802937.653 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:15:37.653Z,1538802937.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-10-06T05:15:37.653Z,1538802937.653 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:15:37.675Z,1538802937.675 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:15:37.675Z,1538802937.675 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:15:38.054Z,1538802938.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:15:38.054Z,1538802938.054 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-10-06T05:15:38.055Z,1538802938.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:15:38.055Z,1538802938.055 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-10-06T05:15:38.453Z,1538802938.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:15:38.454Z,1538802938.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:15:38.454Z,1538802938.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:15:38.455Z,1538802938.455 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:15:38.455Z,1538802938.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:15:38.455Z,1538802938.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:16:03.724Z,1538802963.724 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T05:16:03.725Z,1538802963.725 [Default:CheckIn:C.Wait] Stopped
2018-10-06T05:16:03.725Z,1538802963.725 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T05:16:03.725Z,1538802963.725 [Default:CheckIn:D] Running Loop=1
2018-10-06T05:16:04.125Z,1538802964.125 [Default:CheckIn:D] Stopped
2018-10-06T05:16:04.125Z,1538802964.125 [Default:CheckIn:E] Running Loop=1
2018-10-06T05:16:04.549Z,1538802964.549 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2939.605729 min 
2018-10-06T05:16:04.549Z,1538802964.549 [Default:CheckIn:E] Stopped
2018-10-06T05:16:04.549Z,1538802964.549 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T05:16:04.549Z,1538802964.549 [Default:CheckIn] Stopped
2018-10-06T05:16:04.550Z,1538802964.550 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T05:16:04.550Z,1538802964.550 [Default:CheckIn](INFO): Running loop #285
2018-10-06T05:16:04.550Z,1538802964.550 [Default:CheckIn] Running Loop=285
2018-10-06T05:16:04.550Z,1538802964.550 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T05:16:04.550Z,1538802964.550 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T05:18:38.823Z,1538803118.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:18:38.824Z,1538803118.824 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-10-06T05:18:38.824Z,1538803118.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:18:38.826Z,1538803118.826 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:18:38.826Z,1538803118.826 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-10-06T05:18:38.826Z,1538803118.826 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:18:38.849Z,1538803118.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:18:38.849Z,1538803118.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:18:39.265Z,1538803119.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:18:39.265Z,1538803119.265 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-10-06T05:18:39.266Z,1538803119.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:18:39.266Z,1538803119.266 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-10-06T05:18:39.643Z,1538803119.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:18:39.643Z,1538803119.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:18:39.644Z,1538803119.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:18:39.644Z,1538803119.644 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:18:39.644Z,1538803119.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:18:39.645Z,1538803119.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:19:17.703Z,1538803157.703 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T05:19:17.703Z,1538803157.703 [NAL9602] Data Fault, FailCount= 2
2018-10-06T05:19:17.703Z,1538803157.703 [NAL9602](ERROR): Data Fault
2018-10-06T05:19:17.772Z,1538803157.772 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T05:19:20.914Z,1538803160.914 [NAL9602](INFO): Powering down
2018-10-06T05:19:21.488Z,1538803161.488 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T05:19:21.488Z,1538803161.488 [NAL9602] No Fault, FailCount= 2
2018-10-06T05:19:51.027Z,1538803191.027 [NAL9602](INFO): Powering up NAL9602
2018-10-06T05:19:57.519Z,1538803197.519 [RDI_Pathfinder](ERROR): Failed to parse:
:BS,-32768,-32768,-32768,V
2018-10-06T05:20:01.908Z,1538803201.908 [NAL9602](INFO): NAL9602 initialized
2018-10-06T05:21:07.900Z,1538803267.900 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T05:16:04.6Z
2018-10-06T05:21:07.900Z,1538803267.900 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T05:21:07.900Z,1538803267.900 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T05:21:15.587Z,1538803275.587 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0856.lzma
2018-10-06T05:21:16.368Z,1538803276.368 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0856.lzma.bak
2018-10-06T05:21:16.368Z,1538803276.368 [DataOverHttps](INFO): SBD MOMSN=8612179
2018-10-06T05:21:29.997Z,1538803289.997 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0857.lzma
2018-10-06T05:21:31.472Z,1538803291.472 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0857.lzma.bak
2018-10-06T05:21:31.472Z,1538803291.472 [DataOverHttps](INFO): SBD MOMSN=8612181
2018-10-06T05:21:33.291Z,1538803293.291 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T05:21:33.291Z,1538803293.291 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T05:21:33.291Z,1538803293.291 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T05:21:39.863Z,1538803299.863 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:21:39.863Z,1538803299.863 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-10-06T05:21:39.863Z,1538803299.863 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:21:39.865Z,1538803299.865 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:21:39.865Z,1538803299.865 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-10-06T05:21:39.865Z,1538803299.865 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:21:39.878Z,1538803299.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:21:39.879Z,1538803299.879 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:21:40.287Z,1538803300.287 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:21:40.287Z,1538803300.287 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-10-06T05:21:40.288Z,1538803300.288 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:21:40.288Z,1538803300.288 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-10-06T05:21:40.688Z,1538803300.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:21:40.688Z,1538803300.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:21:40.688Z,1538803300.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:21:40.689Z,1538803300.689 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:21:40.689Z,1538803300.689 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:21:40.690Z,1538803300.690 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:21:44.652Z,1538803304.652 [RDI_Pathfinder](ERROR): Failed to parse:
:HM,G,D,0e8c,0ffd, 15.894, 0.002, 65.535
2018-10-06T05:23:23.555Z,1538803403.555 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-06T05:24:40.931Z,1538803480.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:24:40.931Z,1538803480.931 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-10-06T05:24:40.931Z,1538803480.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:24:40.937Z,1538803480.937 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:24:40.937Z,1538803480.937 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-10-06T05:24:40.937Z,1538803480.937 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:24:40.962Z,1538803480.962 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:24:40.963Z,1538803480.963 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:24:41.331Z,1538803481.331 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:24:41.331Z,1538803481.331 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-10-06T05:24:41.331Z,1538803481.331 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:24:41.331Z,1538803481.331 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-10-06T05:24:41.732Z,1538803481.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:24:41.732Z,1538803481.732 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:24:41.732Z,1538803481.732 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:24:41.733Z,1538803481.733 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:24:41.734Z,1538803481.734 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:24:41.734Z,1538803481.734 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:26:33.594Z,1538803593.594 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T05:26:33.594Z,1538803593.594 [Default:CheckIn:C.Wait] Stopped
2018-10-06T05:26:33.594Z,1538803593.594 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T05:26:33.594Z,1538803593.594 [Default:CheckIn:D] Running Loop=1
2018-10-06T05:26:33.982Z,1538803593.982 [Default:CheckIn:D] Stopped
2018-10-06T05:26:33.982Z,1538803593.982 [Default:CheckIn:E] Running Loop=1
2018-10-06T05:26:34.401Z,1538803594.401 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2950.103646 min 
2018-10-06T05:26:34.401Z,1538803594.401 [Default:CheckIn:E] Stopped
2018-10-06T05:26:34.402Z,1538803594.402 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T05:26:34.402Z,1538803594.402 [Default:CheckIn] Stopped
2018-10-06T05:26:34.402Z,1538803594.402 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T05:26:34.402Z,1538803594.402 [Default:CheckIn](INFO): Running loop #286
2018-10-06T05:26:34.402Z,1538803594.402 [Default:CheckIn] Running Loop=286
2018-10-06T05:26:34.402Z,1538803594.402 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T05:26:34.402Z,1538803594.402 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T05:27:41.827Z,1538803661.827 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:27:41.827Z,1538803661.827 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-10-06T05:27:41.827Z,1538803661.827 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:27:41.829Z,1538803661.829 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:27:41.829Z,1538803661.829 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-10-06T05:27:41.829Z,1538803661.829 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:27:41.850Z,1538803661.850 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:27:41.851Z,1538803661.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:27:42.252Z,1538803662.252 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:27:42.257Z,1538803662.257 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-10-06T05:27:42.258Z,1538803662.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:27:42.258Z,1538803662.258 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-10-06T05:27:42.625Z,1538803662.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:27:42.626Z,1538803662.626 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:27:42.626Z,1538803662.626 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:27:42.626Z,1538803662.626 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:27:42.627Z,1538803662.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:27:42.627Z,1538803662.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:27:59.803Z,1538803679.803 [RDI_Pathfinder](ERROR): only read 0 of 1 data item for BIT error
2018-10-06T05:27:59.804Z,1538803679.804 [RDI_Pathfinder](ERROR): Failed to parse:
:TS,18100522325883,35.0, -0.,1448.9,  0
2018-10-06T05:30:05.323Z,1538803805.323 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T05:30:05.323Z,1538803805.323 [NAL9602] Data Fault, FailCount= 3
2018-10-06T05:30:05.323Z,1538803805.323 [NAL9602](ERROR): Data Fault
2018-10-06T05:30:05.413Z,1538803805.413 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T05:30:05.723Z,1538803805.723 [NAL9602](INFO): Powering down
2018-10-06T05:30:06.599Z,1538803806.599 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T05:30:06.599Z,1538803806.599 [NAL9602] No Fault, FailCount= 3
2018-10-06T05:30:35.791Z,1538803835.791 [NAL9602](INFO): Powering up NAL9602
2018-10-06T05:30:43.023Z,1538803843.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:30:43.023Z,1538803843.023 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-10-06T05:30:43.023Z,1538803843.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:30:43.025Z,1538803843.025 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:30:43.025Z,1538803843.025 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-10-06T05:30:43.025Z,1538803843.025 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:30:43.058Z,1538803843.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:30:43.059Z,1538803843.059 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:30:43.467Z,1538803843.467 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:30:43.469Z,1538803843.469 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-10-06T05:30:43.470Z,1538803843.470 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:30:43.470Z,1538803843.470 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-10-06T05:30:43.830Z,1538803843.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:30:43.830Z,1538803843.830 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:30:43.831Z,1538803843.831 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:30:43.831Z,1538803843.831 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:30:43.831Z,1538803843.831 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:30:43.832Z,1538803843.832 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:30:46.600Z,1538803846.600 [NAL9602](INFO): NAL9602 initialized
2018-10-06T05:31:36.325Z,1538803896.325 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T05:26:34.4Z
2018-10-06T05:31:36.326Z,1538803896.326 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T05:31:36.326Z,1538803896.326 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T05:31:41.246Z,1538803901.246 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0859.lzma
2018-10-06T05:31:42.015Z,1538803902.015 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0859.lzma.bak
2018-10-06T05:31:42.015Z,1538803902.015 [DataOverHttps](INFO): SBD MOMSN=8612183
2018-10-06T05:31:51.276Z,1538803911.276 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0860.lzma
2018-10-06T05:31:52.050Z,1538803912.050 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0860.lzma.bak
2018-10-06T05:31:52.051Z,1538803912.051 [DataOverHttps](INFO): SBD MOMSN=8612185
2018-10-06T05:31:53.035Z,1538803913.035 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T05:31:53.035Z,1538803913.035 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T05:31:53.035Z,1538803913.035 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T05:33:43.979Z,1538804023.979 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:33:43.979Z,1538804023.979 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-10-06T05:33:43.979Z,1538804023.979 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:33:43.985Z,1538804023.985 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:33:43.985Z,1538804023.985 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-10-06T05:33:43.985Z,1538804023.985 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:33:44.007Z,1538804024.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:33:44.007Z,1538804024.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:33:44.431Z,1538804024.431 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:33:44.431Z,1538804024.431 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-10-06T05:33:44.431Z,1538804024.431 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:33:44.431Z,1538804024.431 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-10-06T05:33:44.794Z,1538804024.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:33:44.794Z,1538804024.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:33:44.795Z,1538804024.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:33:44.795Z,1538804024.795 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:33:44.795Z,1538804024.795 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:33:44.796Z,1538804024.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:36:44.827Z,1538804204.827 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:36:44.827Z,1538804204.827 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-10-06T05:36:44.827Z,1538804204.827 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:36:44.833Z,1538804204.833 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:36:44.833Z,1538804204.833 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-10-06T05:36:44.833Z,1538804204.833 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:36:44.859Z,1538804204.859 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:36:44.859Z,1538804204.859 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:36:45.272Z,1538804205.272 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:36:45.272Z,1538804205.272 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-10-06T05:36:45.273Z,1538804205.273 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:36:45.273Z,1538804205.273 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-10-06T05:36:45.642Z,1538804205.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:36:45.642Z,1538804205.642 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:36:45.643Z,1538804205.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:36:45.643Z,1538804205.643 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:36:45.643Z,1538804205.643 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:36:45.644Z,1538804205.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:36:53.237Z,1538804213.237 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T05:36:53.238Z,1538804213.238 [Default:CheckIn:C.Wait] Stopped
2018-10-06T05:36:53.238Z,1538804213.238 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T05:36:53.238Z,1538804213.238 [Default:CheckIn:D] Running Loop=1
2018-10-06T05:36:53.632Z,1538804213.632 [Default:CheckIn:D] Stopped
2018-10-06T05:36:53.632Z,1538804213.632 [Default:CheckIn:E] Running Loop=1
2018-10-06T05:36:54.022Z,1538804214.022 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2960.430990 min 
2018-10-06T05:36:54.022Z,1538804214.022 [Default:CheckIn:E] Stopped
2018-10-06T05:36:54.022Z,1538804214.022 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T05:36:54.022Z,1538804214.022 [Default:CheckIn] Stopped
2018-10-06T05:36:54.022Z,1538804214.022 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T05:36:54.022Z,1538804214.022 [Default:CheckIn](INFO): Running loop #287
2018-10-06T05:36:54.023Z,1538804214.023 [Default:CheckIn] Running Loop=287
2018-10-06T05:36:54.023Z,1538804214.023 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T05:36:54.023Z,1538804214.023 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T05:39:36.507Z,1538804376.507 [RDI_Pathfinder](ERROR): Failed to parse:
:BI,-32768,-32768,-32768,-32768,V
2018-10-06T05:39:45.699Z,1538804385.699 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:39:45.699Z,1538804385.699 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-10-06T05:39:45.699Z,1538804385.699 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:39:45.701Z,1538804385.701 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:39:45.701Z,1538804385.701 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-10-06T05:39:45.701Z,1538804385.701 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:39:45.743Z,1538804385.743 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:39:45.743Z,1538804385.743 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:39:46.122Z,1538804386.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:39:46.122Z,1538804386.122 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-10-06T05:39:46.123Z,1538804386.123 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:39:46.123Z,1538804386.123 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-10-06T05:39:46.535Z,1538804386.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:39:46.535Z,1538804386.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:39:46.536Z,1538804386.536 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:39:46.536Z,1538804386.536 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:39:46.537Z,1538804386.537 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:39:46.541Z,1538804386.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:40:49.447Z,1538804449.447 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T05:40:49.447Z,1538804449.447 [NAL9602] Data Fault, FailCount= 4
2018-10-06T05:40:49.447Z,1538804449.447 [NAL9602](ERROR): Data Fault
2018-10-06T05:40:49.538Z,1538804449.538 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T05:40:49.843Z,1538804449.843 [NAL9602](INFO): Powering down
2018-10-06T05:40:50.722Z,1538804450.722 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T05:40:50.722Z,1538804450.722 [NAL9602] No Fault, FailCount= 4
2018-10-06T05:41:23.269Z,1538804483.269 [NAL9602](INFO): Powering up NAL9602
2018-10-06T05:41:34.252Z,1538804494.252 [NAL9602](INFO): NAL9602 initialized
2018-10-06T05:41:56.526Z,1538804516.526 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T05:36:54.0Z
2018-10-06T05:41:56.526Z,1538804516.526 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T05:41:56.526Z,1538804516.526 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T05:42:02.270Z,1538804522.270 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181004T041305/Courier0862.lzma
2018-10-06T05:42:03.046Z,1538804523.046 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0862.lzma.bak
2018-10-06T05:42:03.046Z,1538804523.046 [DataOverHttps](INFO): SBD MOMSN=8612187
2018-10-06T05:42:12.337Z,1538804532.337 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181004T041305/Express0863.lzma
2018-10-06T05:42:13.250Z,1538804533.250 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0863.lzma.bak
2018-10-06T05:42:13.250Z,1538804533.250 [DataOverHttps](INFO): SBD MOMSN=8612189
2018-10-06T05:42:14.092Z,1538804534.092 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T05:42:14.092Z,1538804534.092 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T05:42:14.092Z,1538804534.092 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T05:42:46.738Z,1538804566.738 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:42:46.738Z,1538804566.738 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-10-06T05:42:46.738Z,1538804566.738 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:42:46.740Z,1538804566.740 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:42:46.740Z,1538804566.740 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-10-06T05:42:46.740Z,1538804566.740 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:42:46.786Z,1538804566.786 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:42:46.786Z,1538804566.786 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:42:47.111Z,1538804567.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:42:47.111Z,1538804567.111 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-10-06T05:42:47.112Z,1538804567.112 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:42:47.112Z,1538804567.112 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-10-06T05:42:47.518Z,1538804567.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:42:47.518Z,1538804567.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:42:47.519Z,1538804567.519 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:42:47.519Z,1538804567.519 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:42:47.519Z,1538804567.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:42:47.520Z,1538804567.520 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:45:49.480Z,1538804749.480 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:45:49.480Z,1538804749.480 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-10-06T05:45:49.480Z,1538804749.480 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:45:49.482Z,1538804749.482 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:45:49.482Z,1538804749.482 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-10-06T05:45:49.482Z,1538804749.482 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:45:49.535Z,1538804749.535 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:45:49.535Z,1538804749.535 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:45:49.652Z,1538804749.652 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:45:49.652Z,1538804749.652 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-10-06T05:45:49.652Z,1538804749.652 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:45:49.652Z,1538804749.652 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-10-06T05:45:50.006Z,1538804750.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:45:50.007Z,1538804750.007 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:45:50.007Z,1538804750.007 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:45:50.007Z,1538804750.007 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:45:50.008Z,1538804750.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:45:50.008Z,1538804750.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:47:14.383Z,1538804834.383 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T05:47:14.383Z,1538804834.383 [Default:CheckIn:C.Wait] Stopped
2018-10-06T05:47:14.383Z,1538804834.383 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T05:47:14.383Z,1538804834.383 [Default:CheckIn:D] Running Loop=1
2018-10-06T05:47:14.757Z,1538804834.757 [Default:CheckIn:D] Stopped
2018-10-06T05:47:14.757Z,1538804834.757 [Default:CheckIn:E] Running Loop=1
2018-10-06T05:47:15.166Z,1538804835.166 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2970.783073 min 
2018-10-06T05:47:15.167Z,1538804835.167 [Default:CheckIn:E] Stopped
2018-10-06T05:47:15.167Z,1538804835.167 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T05:47:15.167Z,1538804835.167 [Default:CheckIn] Stopped
2018-10-06T05:47:15.167Z,1538804835.167 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T05:47:15.168Z,1538804835.168 [Default:CheckIn](INFO): Running loop #288
2018-10-06T05:47:15.168Z,1538804835.168 [Default:CheckIn] Running Loop=288
2018-10-06T05:47:15.168Z,1538804835.168 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-06T05:47:15.168Z,1538804835.168 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-06T05:48:15.505Z,1538804895.505 [BPC1](ERROR): BPC1A: No match for stick with serial number:0000 in the onboard configuration file.
2018-10-06T05:48:22.311Z,1538804902.311 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6.
2018-10-06T05:48:50.359Z,1538804930.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:48:50.359Z,1538804930.359 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-10-06T05:48:50.359Z,1538804930.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:48:50.365Z,1538804930.365 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:48:50.365Z,1538804930.365 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-10-06T05:48:50.365Z,1538804930.365 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:48:50.399Z,1538804930.399 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:48:50.399Z,1538804930.399 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:48:50.799Z,1538804930.799 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:48:50.799Z,1538804930.799 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-10-06T05:48:50.800Z,1538804930.800 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:48:50.800Z,1538804930.800 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-10-06T05:48:51.171Z,1538804931.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:48:51.171Z,1538804931.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:48:51.172Z,1538804931.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:48:51.172Z,1538804931.172 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:48:51.172Z,1538804931.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:48:51.173Z,1538804931.173 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:51:37.463Z,1538805097.463 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-06T05:51:37.463Z,1538805097.463 [NAL9602] Data Fault, FailCount= 5
2018-10-06T05:51:37.463Z,1538805097.463 [NAL9602](ERROR): Data Fault
2018-10-06T05:51:37.550Z,1538805097.550 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-06T05:51:37.550Z,1538805097.550 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-06T05:51:37.867Z,1538805097.867 [NAL9602](INFO): Powering down
2018-10-06T05:51:37.931Z,1538805097.931 [CBIT](INFO): Critical error at 20181006T055137
2018-10-06T05:51:51.191Z,1538805111.191 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:51:51.191Z,1538805111.191 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-10-06T05:51:51.191Z,1538805111.191 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:51:51.193Z,1538805111.193 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:51:51.193Z,1538805111.193 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-10-06T05:51:51.193Z,1538805111.193 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:51:51.245Z,1538805111.245 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:51:51.245Z,1538805111.245 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:51:51.648Z,1538805111.648 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:51:51.648Z,1538805111.648 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-10-06T05:51:51.653Z,1538805111.653 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:51:51.653Z,1538805111.653 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-10-06T05:51:51.998Z,1538805111.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:51:51.998Z,1538805111.998 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:51:51.999Z,1538805111.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:51:51.999Z,1538805111.999 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:51:51.999Z,1538805111.999 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:51:51.000Z,1538805112.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:52:17.176Z,1538805137.176 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-06T05:47:15.2Z
2018-10-06T05:52:17.176Z,1538805137.176 [Default:CheckIn:Read_GPS] Stopped
2018-10-06T05:52:17.176Z,1538805137.176 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-06T05:52:22.133Z,1538805142.133 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20181004T041305/Courier0865.lzma
2018-10-06T05:52:22.907Z,1538805142.907 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Courier0865.lzma.bak
2018-10-06T05:52:22.908Z,1538805142.908 [DataOverHttps](INFO): SBD MOMSN=8612191
2018-10-06T05:52:32.889Z,1538805152.889 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181004T041305/Express0866.lzma
2018-10-06T05:52:33.675Z,1538805153.675 [DataOverHttps](INFO): Moved sent file to Logs/20181004T041305/Express0866.lzma.bak
2018-10-06T05:52:33.675Z,1538805153.675 [DataOverHttps](INFO): SBD MOMSN=8612193
2018-10-06T05:52:34.715Z,1538805154.715 [Default:CheckIn:Read_Iridium] Stopped
2018-10-06T05:52:34.715Z,1538805154.715 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-06T05:52:34.715Z,1538805154.715 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-06T05:53:37.798Z,1538805217.798 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-06T05:53:37.799Z,1538805217.799 [NAL9602] No Fault, FailCount= 5
2018-10-06T05:53:38.147Z,1538805218.147 [NAL9602](INFO): Powering up NAL9602
2018-10-06T05:53:49.413Z,1538805229.413 [NAL9602](INFO): NAL9602 initialized
2018-10-06T05:54:52.371Z,1538805292.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:54:52.371Z,1538805292.371 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-10-06T05:54:52.371Z,1538805292.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-10-06T05:54:52.377Z,1538805292.377 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-06T05:54:52.377Z,1538805292.377 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-10-06T05:54:52.377Z,1538805292.377 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-06T05:54:52.403Z,1538805292.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-10-06T05:54:52.403Z,1538805292.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-06T05:54:52.788Z,1538805292.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-10-06T05:54:52.789Z,1538805292.789 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-10-06T05:54:52.793Z,1538805292.793 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-06T05:54:52.793Z,1538805292.793 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-10-06T05:54:53.176Z,1538805293.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-10-06T05:54:53.176Z,1538805293.176 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:54:53.177Z,1538805293.177 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:54:53.177Z,1538805293.177 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-06T05:54:53.178Z,1538805293.178 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-06T05:54:53.179Z,1538805293.179 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-06T05:57:34.848Z,1538805454.848 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-06T05:57:34.850Z,1538805454.850 [Default:CheckIn:C.Wait] Stopped
2018-10-06T05:57:34.850Z,1538805454.850 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-06T05:57:34.850Z,1538805454.850 [Default:CheckIn:D] Running Loop=1
2018-10-06T05:57:35.274Z,1538805455.274 [Default:CheckIn:D] Stopped
2018-10-06T05:57:35.274Z,1538805455.274 [Default:CheckIn:E] Running Loop=1
2018-10-06T05:57:35.650Z,1538805455.650 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2981.125000 min 
2018-10-06T05:57:35.651Z,1538805455.651 [Default:CheckIn:E] Stopped
2018-10-06T05:57:35.651Z,1538805455.651 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-06T05:57:35.651Z,1538805455.651 [Default:CheckIn] Stopped
2018-10-06T05:57:35.651Z,1538805455.651 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-06T05:57:35.651Z,1538805455.651 [Default:D] Running Loop=1
2018-10-06T05:57:36.064Z,1538805456.064 [Default:D](IMPORTANT): Restarting logs and Default mission.
2018-10-06T05:57:36.066Z,1538805456.066 [Default:D] Stopped
2018-10-06T05:57:36.066Z,1538805456.066 [Default:E.Execute] Running Loop=1