2019-09-23T19:04:16.786Z,1569265456.786 [Supervisor](DEBUG): Initializing supervisor.
2019-09-23T19:04:16.789Z,1569265456.789 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2019-09-23T19:04:16.789Z,1569265456.789 [SyncHandler](INFO): Protected caller Thread ID is 6706
2019-09-23T19:04:16.790Z,1569265456.790 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2019-09-23T19:04:16.791Z,1569265456.791 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2019-09-23T19:04:16.791Z,1569265456.791 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 6707
2019-09-23T19:04:16.794Z,1569265456.794 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2019-09-23T19:04:16.806Z,1569265456.806 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2019-09-23T19:04:16.807Z,1569265456.807 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2019-09-23T19:04:16.807Z,1569265456.807 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 6708
2019-09-23T19:04:16.808Z,1569265456.808 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2019-09-23T19:04:16.809Z,1569265456.809 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2019-09-23T19:04:16.809Z,1569265456.809 [logger ThreadHandler](INFO): Protected caller Thread ID is 6709
2019-09-23T19:04:16.811Z,1569265456.811 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2019-09-23T19:04:16.811Z,1569265456.811 [Supervisor](INFO): Looking for Config files in directory: Config/
2019-09-23T19:04:16.813Z,1569265456.813 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2019-09-23T19:04:17.218Z,1569265457.218 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2019-09-23T19:04:17.218Z,1569265457.218 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2019-09-23T19:04:17.357Z,1569265457.357 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2019-09-23T19:04:17.358Z,1569265457.358 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2019-09-23T19:04:17.438Z,1569265457.438 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2019-09-23T19:04:17.535Z,1569265457.535 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2019-09-23T19:04:17.535Z,1569265457.535 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2019-09-23T19:04:17.628Z,1569265457.628 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2019-09-23T19:04:17.629Z,1569265457.629 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2019-09-23T19:04:17.997Z,1569265457.997 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2019-09-23T19:04:17.997Z,1569265457.997 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2019-09-23T19:04:18.097Z,1569265458.097 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2019-09-23T19:04:18.098Z,1569265458.098 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2019-09-23T19:04:18.541Z,1569265458.541 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2019-09-23T19:04:18.542Z,1569265458.542 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2019-09-23T19:04:18.734Z,1569265458.734 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2019-09-23T19:04:18.734Z,1569265458.734 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2019-09-23T19:04:19.026Z,1569265459.026 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2019-09-23T19:04:19.027Z,1569265459.027 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2019-09-23T19:04:19.232Z,1569265459.232 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2019-09-23T19:04:19.232Z,1569265459.232 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2019-09-23T19:04:19.370Z,1569265459.370 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2019-09-23T19:04:19.371Z,1569265459.371 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2019-09-23T19:04:19.964Z,1569265459.964 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2019-09-23T19:04:19.965Z,1569265459.965 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2019-09-23T19:04:20.300Z,1569265460.300 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2019-09-23T19:04:20.301Z,1569265460.301 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2019-09-23T19:04:20.502Z,1569265460.502 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2019-09-23T19:04:20.504Z,1569265460.504 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-triton/
2019-09-23T19:04:20.504Z,1569265460.504 [Supervisor](INFO): Opening Config file at: Config/lrauv-triton/vehicle.cfg
2019-09-23T19:04:20.740Z,1569265460.740 [Supervisor](INFO): Opening Config file at: Config/lrauv-triton/secure.cfg
2019-09-23T19:04:20.939Z,1569265460.939 [Supervisor](INFO): Opening Config file at: Config/lrauv-triton/Science.cfg
2019-09-23T19:04:21.244Z,1569265461.244 [Supervisor](INFO): Opening Config file at: Config/lrauv-triton/Simulator.cfg
2019-09-23T19:04:21.387Z,1569265461.387 [Supervisor](INFO): Opening Config file at: Config/lrauv-triton/Battery.cfg
2019-09-23T19:04:21.704Z,1569265461.704 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2019-09-23T19:04:21.705Z,1569265461.705 [Supervisor](INFO): Opening Config file at: Config/lrauv-triton/logger.cfg
2019-09-23T19:04:22.238Z,1569265462.238 [Supervisor](INFO): Opening Config file at: Config/lrauv-triton/Servo.cfg
2019-09-23T19:04:22.343Z,1569265462.343 [Supervisor](INFO): Opening Config file at: Config/lrauv-triton/Navigation.cfg
2019-09-23T19:04:22.434Z,1569265462.434 [Supervisor](INFO): Opening Config file at: Config/lrauv-triton/Sensor.cfg
2019-09-23T19:04:22.582Z,1569265462.582 [Supervisor](INFO): Opening Config file at: Config/lrauv-triton/Control.cfg
2019-09-23T19:04:22.679Z,1569265462.679 [Supervisor](INFO): Opening Config file at: Config/lrauv-triton/BIT.cfg
2019-09-23T19:04:22.776Z,1569265462.776 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-triton/root/
2019-09-23T19:04:22.776Z,1569265462.776 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2019-09-23T19:04:22.781Z,1569265462.781 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2019-09-23T19:04:22.794Z,1569265462.794 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2019-09-23T19:04:22.795Z,1569265462.795 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2019-09-23T19:04:22.862Z,1569265462.862 [VerticalControl](DEBUG): Construct VerticalControl.
2019-09-23T19:04:22.972Z,1569265462.972 [VerticalControl] Loaded
2019-09-23T19:04:22.972Z,1569265462.972 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2019-09-23T19:04:22.973Z,1569265462.973 [HorizontalControl](DEBUG): Construct HorizontalControl.
2019-09-23T19:04:23.040Z,1569265463.040 [HorizontalControl] Loaded
2019-09-23T19:04:23.041Z,1569265463.041 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2019-09-23T19:04:23.041Z,1569265463.041 [SpeedControl](DEBUG): Construct SpeedControl.
2019-09-23T19:04:23.047Z,1569265463.047 [SpeedControl] Loaded
2019-09-23T19:04:23.047Z,1569265463.047 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2019-09-23T19:04:23.048Z,1569265463.048 [LoopControl](DEBUG): Construct LoopControl.
2019-09-23T19:04:23.048Z,1569265463.048 [LoopControl] Loaded
2019-09-23T19:04:23.048Z,1569265463.048 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2019-09-23T19:04:23.049Z,1569265463.049 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2019-09-23T19:04:23.049Z,1569265463.049 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2019-09-23T19:04:23.174Z,1569265463.174 [BuoyancyServo] Loaded
2019-09-23T19:04:23.174Z,1569265463.174 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2019-09-23T19:04:23.185Z,1569265463.185 [ElevatorServo] Loaded
2019-09-23T19:04:23.186Z,1569265463.186 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2019-09-23T19:04:23.196Z,1569265463.196 [MassServo] Loaded
2019-09-23T19:04:23.196Z,1569265463.196 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2019-09-23T19:04:23.207Z,1569265463.207 [RudderServo] Loaded
2019-09-23T19:04:23.207Z,1569265463.207 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2019-09-23T19:04:23.218Z,1569265463.218 [ThrusterServo] Loaded
2019-09-23T19:04:23.218Z,1569265463.218 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2019-09-23T19:04:23.219Z,1569265463.219 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2019-09-23T19:04:23.219Z,1569265463.219 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2019-09-23T19:04:23.260Z,1569265463.260 [DepthRateCalculator] Loaded
2019-09-23T19:04:23.260Z,1569265463.260 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2019-09-23T19:04:23.265Z,1569265463.265 [PitchRateCalculator] Loaded
2019-09-23T19:04:23.265Z,1569265463.265 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2019-09-23T19:04:23.280Z,1569265463.280 [SpeedCalculator] Loaded
2019-09-23T19:04:23.280Z,1569265463.280 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2019-09-23T19:04:23.301Z,1569265463.301 [TempGradientCalculator] Loaded
2019-09-23T19:04:23.301Z,1569265463.301 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2019-09-23T19:04:23.306Z,1569265463.306 [YawRateCalculator] Loaded
2019-09-23T19:04:23.307Z,1569265463.307 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2019-09-23T19:04:23.336Z,1569265463.336 [ElevatorOffsetCalculator] Loaded
2019-09-23T19:04:23.336Z,1569265463.336 [ComponentRegistry](DEBUG): SyncComponent "ElevatorOffsetCalculator" handled in the control thread.
2019-09-23T19:04:23.336Z,1569265463.336 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2019-09-23T19:04:23.337Z,1569265463.337 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2019-09-23T19:04:23.439Z,1569265463.439 [DeadReckonUsingMultipleVelocitySources] Loaded
2019-09-23T19:04:23.440Z,1569265463.440 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2019-09-23T19:04:23.460Z,1569265463.460 [NavChart] Loaded
2019-09-23T19:04:23.461Z,1569265463.461 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2019-09-23T19:04:23.465Z,1569265463.465 [UniversalFixResidualReporter] Loaded
2019-09-23T19:04:23.465Z,1569265463.465 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2019-09-23T19:04:23.465Z,1569265463.465 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2019-09-23T19:04:23.466Z,1569265463.466 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2019-09-23T19:04:23.747Z,1569265463.747 [AHRS_M2](DEBUG): LcmSlateWriter::add(): platform_orientation
2019-09-23T19:04:23.752Z,1569265463.752 [AHRS_M2](INFO): created writer for : platform_orientation
2019-09-23T19:04:23.754Z,1569265463.754 [AHRS_M2](DEBUG): LcmSlateWriter::add(): platform_magnetic_orientation
2019-09-23T19:04:23.759Z,1569265463.759 [AHRS_M2](INFO): created writer for : platform_magnetic_orientation
2019-09-23T19:04:23.759Z,1569265463.759 [AHRS_M2](DEBUG): LcmSlateWriter::add(): platform_pitch_angle
2019-09-23T19:04:23.764Z,1569265463.764 [AHRS_M2](INFO): created writer for : platform_pitch_angle
2019-09-23T19:04:23.765Z,1569265463.765 [AHRS_M2](DEBUG): LcmSlateWriter::add(): platform_roll_angle
2019-09-23T19:04:23.770Z,1569265463.770 [AHRS_M2](INFO): created writer for : platform_roll_angle
2019-09-23T19:04:23.840Z,1569265463.840 [AHRS_M2] Loaded
2019-09-23T19:04:23.840Z,1569265463.840 [ComponentRegistry](DEBUG): SyncComponent "AHRS_M2" handled in the control thread.
2019-09-23T19:04:23.912Z,1569265463.912 [DataOverHttps] Loaded
2019-09-23T19:04:23.913Z,1569265463.913 [ComponentRegistry](DEBUG): Component "DataOverHttps" handled in its own thread.
2019-09-23T19:04:23.914Z,1569265463.914 [DataOverHttps ThreadHandler](DEBUG): Created PCaller Thread at 408124E0
2019-09-23T19:04:23.914Z,1569265463.914 [DataOverHttps ThreadHandler](INFO): Protected caller Thread ID is 6788
2019-09-23T19:04:23.928Z,1569265463.928 [Depth_Keller] Loaded
2019-09-23T19:04:23.928Z,1569265463.928 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2019-09-23T19:04:23.933Z,1569265463.933 [DropWeight] Loaded
2019-09-23T19:04:23.933Z,1569265463.933 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2019-09-23T19:04:24.060Z,1569265464.060 [DVL_micro] Loaded
2019-09-23T19:04:24.060Z,1569265464.060 [ComponentRegistry](DEBUG): SyncComponent "DVL_micro" handled in the control thread.
2019-09-23T19:04:24.156Z,1569265464.156 [NAL9602] Loaded
2019-09-23T19:04:24.157Z,1569265464.157 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2019-09-23T19:04:24.172Z,1569265464.172 [Onboard] Loaded
2019-09-23T19:04:24.172Z,1569265464.172 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2019-09-23T19:04:24.176Z,1569265464.176 [Radio_Surface] Loaded
2019-09-23T19:04:24.176Z,1569265464.176 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2019-09-23T19:04:24.177Z,1569265464.177 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 408424E0
2019-09-23T19:04:24.177Z,1569265464.177 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 6789
2019-09-23T19:04:24.302Z,1569265464.302 [DAT] Loaded
2019-09-23T19:04:24.302Z,1569265464.302 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread.
2019-09-23T19:04:25.802Z,1569265465.802 [BPC1] Loaded
2019-09-23T19:04:25.803Z,1569265465.803 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2019-09-23T19:04:25.823Z,1569265465.823 [BR_Ping1D] Loaded
2019-09-23T19:04:25.824Z,1569265465.824 [ComponentRegistry](DEBUG): SyncComponent "BR_Ping1D" handled in the control thread.
2019-09-23T19:04:25.824Z,1569265465.824 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2019-09-23T19:04:25.825Z,1569265465.825 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2019-09-23T19:04:26.048Z,1569265466.048 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2019-09-23T19:04:26.048Z,1569265466.048 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2019-09-23T19:04:26.293Z,1569265466.293 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2019-09-23T19:04:26.293Z,1569265466.293 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2019-09-23T19:04:26.325Z,1569265466.325 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2019-09-23T19:04:26.326Z,1569265466.326 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2019-09-23T19:04:26.666Z,1569265466.666 [CTD_Seabird](DEBUG): LcmSlateWriter::add(): sea_water_density
2019-09-23T19:04:26.671Z,1569265466.671 [CTD_Seabird](INFO): created writer for : sea_water_density
2019-09-23T19:04:26.672Z,1569265466.672 [CTD_Seabird](DEBUG): LcmSlateWriter::add(): depth
2019-09-23T19:04:26.677Z,1569265466.677 [CTD_Seabird](INFO): created writer for : depth
2019-09-23T19:04:26.677Z,1569265466.677 [CTD_Seabird](DEBUG): LcmSlateWriter::add(): sea_water_pressure
2019-09-23T19:04:26.682Z,1569265466.682 [CTD_Seabird](INFO): created writer for : sea_water_pressure
2019-09-23T19:04:26.683Z,1569265466.683 [CTD_Seabird](DEBUG): LcmSlateWriter::add(): sea_water_salinity
2019-09-23T19:04:26.688Z,1569265466.688 [CTD_Seabird](INFO): created writer for : sea_water_salinity
2019-09-23T19:04:26.688Z,1569265466.688 [CTD_Seabird](DEBUG): LcmSlateWriter::add(): sea_water_temperature
2019-09-23T19:04:26.693Z,1569265466.693 [CTD_Seabird](INFO): created writer for : sea_water_temperature
2019-09-23T19:04:26.694Z,1569265466.694 [CTD_Seabird](DEBUG): LcmSlateWriter::add(): sea_water_electrical_conductivity
2019-09-23T19:04:26.699Z,1569265466.699 [CTD_Seabird](INFO): created writer for : sea_water_electrical_conductivity
2019-09-23T19:04:26.700Z,1569265466.700 [CTD_Seabird](DEBUG): LcmSlateWriter::add(): speed_of_sound_in_sea_water
2019-09-23T19:04:26.704Z,1569265466.704 [CTD_Seabird](INFO): created writer for : speed_of_sound_in_sea_water
2019-09-23T19:04:26.705Z,1569265466.705 [CTD_Seabird](DEBUG): LcmSlateWriter::add(): mass_concentration_of_oxygen_in_sea_water
2019-09-23T19:04:26.710Z,1569265466.710 [CTD_Seabird](INFO): created writer for : mass_concentration_of_oxygen_in_sea_water
2019-09-23T19:04:26.711Z,1569265466.711 [CTD_Seabird](DEBUG): LcmSlateWriter::add(DAtaURI): CTD_Seabird.sea_water_dissolved_oxygen_freq
2019-09-23T19:04:26.711Z,1569265466.711 [CTD_Seabird](DEBUG): LcmSlateWriter::add(): dataName: sea_water_dissolved_oxygen_freq
2019-09-23T19:04:26.743Z,1569265466.743 [CTD_Seabird] Loaded
2019-09-23T19:04:26.744Z,1569265466.744 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2019-09-23T19:04:26.745Z,1569265466.745 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 409D94E0
2019-09-23T19:04:26.745Z,1569265466.745 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 6790
2019-09-23T19:04:26.760Z,1569265466.760 [PAR_Licor] Loaded
2019-09-23T19:04:26.760Z,1569265466.760 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2019-09-23T19:04:26.807Z,1569265466.807 [WetLabsBB2FL] Loaded
2019-09-23T19:04:26.807Z,1569265466.807 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2019-09-23T19:04:26.808Z,1569265466.808 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 40A094E0
2019-09-23T19:04:26.809Z,1569265466.809 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 6791
2019-09-23T19:04:26.809Z,1569265466.809 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2019-09-23T19:04:26.810Z,1569265466.810 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2019-09-23T19:04:27.099Z,1569265467.099 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2019-09-23T19:04:27.100Z,1569265467.100 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2019-09-23T19:04:27.234Z,1569265467.234 [SBIT](DEBUG): Construct Startup Built In Test.
2019-09-23T19:04:27.245Z,1569265467.245 [SBIT] Loaded
2019-09-23T19:04:27.246Z,1569265467.246 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2019-09-23T19:04:27.246Z,1569265467.246 [IBIT](DEBUG): Construct Initiated Built In Test.
2019-09-23T19:04:27.257Z,1569265467.257 [IBIT] Loaded
2019-09-23T19:04:27.258Z,1569265467.258 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2019-09-23T19:04:27.261Z,1569265467.261 [CBIT](DEBUG): Construct Continuous Built In Test.
2019-09-23T19:04:27.397Z,1569265467.397 [CBIT] Loaded
2019-09-23T19:04:27.398Z,1569265467.398 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2019-09-23T19:04:27.398Z,1569265467.398 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2019-09-23T19:04:27.402Z,1569265467.402 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2019-09-23T19:04:27.402Z,1569265467.402 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2019-09-23T19:04:27.409Z,1569265467.409 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2019-09-23T19:04:27.410Z,1569265467.410 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40AE84E0
2019-09-23T19:04:27.410Z,1569265467.410 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 6792
2019-09-23T19:04:27.415Z,1569265467.415 [Supervisor](INFO): Main Thread ID is 5526
2019-09-23T19:04:27.415Z,1569265467.415 [Supervisor](DEBUG): Running supervisor.
2019-09-23T19:04:27.416Z,1569265467.416 [CommandLine ThreadHandler](INFO): Handler Thread ID is 6793
2019-09-23T19:04:27.418Z,1569265467.418 [controlThread ThreadHandler](INFO): Handler Thread ID is 6794
2019-09-23T19:04:27.419Z,1569265467.419 [controlThread](DEBUG): Initializing ControlThread
2019-09-23T19:04:27.419Z,1569265467.419 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2019-09-23T19:04:27.421Z,1569265467.421 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2019-09-23T19:04:27.422Z,1569265467.422 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2019-09-23T19:04:27.422Z,1569265467.422 [LoopControl](DEBUG): Initialize LoopControlComponent.
2019-09-23T19:04:27.424Z,1569265467.424 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2019-09-23T19:04:27.424Z,1569265467.424 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2019-09-23T19:04:27.424Z,1569265467.424 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2019-09-23T19:04:27.425Z,1569265467.425 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2019-09-23T19:04:27.425Z,1569265467.425 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2019-09-23T19:04:27.425Z,1569265467.425 [ElevatorOffsetCalculator](DEBUG): Initializing ElevatorOffsetCalculator.
2019-09-23T19:04:27.426Z,1569265467.426 [NavChart](DEBUG): Initialize NavChart Navigation.
2019-09-23T19:04:27.427Z,1569265467.427 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2019-09-23T19:04:27.433Z,1569265467.433 [SBIT](INFO): Initialize SBIT Component.
2019-09-23T19:04:27.434Z,1569265467.434 [SBIT](IMPORTANT): git: 2019-09-10-9-g851767d
2019-09-23T19:04:27.434Z,1569265467.434 [SBIT](INFO): git hash: 851767d67e1cfa0383bee058d4dc44c68fc1ad67
2019-09-23T19:04:27.434Z,1569265467.434 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2019-09-23T19:04:27.435Z,1569265467.435 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #1 PREEMPT Tue Dec 18 21:19:28 PST 2018
Kernel Reported: #1 PREEMPT Thu Feb 21 11:17:40 PST 2019
2019-09-23T19:04:27.436Z,1569265467.436 [SBIT](INFO): Beginning SBIT in 20.000000 seconds.
2019-09-23T19:04:27.437Z,1569265467.437 [IBIT](INFO): Initialize IBIT Component.
2019-09-23T19:04:27.438Z,1569265467.438 [CBIT](DEBUG): Initialize CBIT Component.
2019-09-23T19:04:27.439Z,1569265467.439 [logger ThreadHandler](INFO): Handler Thread ID is 6795
2019-09-23T19:04:27.449Z,1569265467.449 [CBIT](DEBUG): Initialized mux pins.
2019-09-23T19:04:27.449Z,1569265467.449 [CBIT](DEBUG): Initializing the watchdog timer.
2019-09-23T19:04:27.457Z,1569265467.457 [DataOverHttps ThreadHandler](INFO): Handler Thread ID is 6796
2019-09-23T19:04:27.458Z,1569265467.458 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2019-09-23T19:04:27.473Z,1569265467.473 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 6797
2019-09-23T19:04:27.477Z,1569265467.477 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2019-09-23T19:04:27.477Z,1569265467.477 [CBIT](DEBUG): Initializing heartbeat.
2019-09-23T19:04:27.485Z,1569265467.485 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 6798
2019-09-23T19:04:27.486Z,1569265467.486 [CTD_Seabird](DEBUG): Initializing CTD_Seabird.
2019-09-23T19:04:27.489Z,1569265467.489 [CTD_Seabird](INFO): Opening uart, block timeout 10ths=20
2019-09-23T19:04:27.490Z,1569265467.490 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 6800
2019-09-23T19:04:27.492Z,1569265467.492 [WetLabsBB2FL](INFO): Powering down
2019-09-23T19:04:27.529Z,1569265467.529 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 6801
2019-09-23T19:04:27.532Z,1569265467.532 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2019-09-23T19:04:27.532Z,1569265467.532 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2019-09-23T19:04:27.533Z,1569265467.533 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2019-09-23T19:04:27.533Z,1569265467.533 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2019-09-23T19:04:27.533Z,1569265467.533 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2019-09-23T19:04:27.533Z,1569265467.533 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2019-09-23T19:04:27.534Z,1569265467.534 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2019-09-23T19:04:27.534Z,1569265467.534 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2019-09-23T19:04:27.534Z,1569265467.534 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2019-09-23T19:04:27.534Z,1569265467.534 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2019-09-23T19:04:27.534Z,1569265467.534 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2019-09-23T19:04:27.534Z,1569265467.534 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2019-09-23T19:04:27.535Z,1569265467.535 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2019-09-23T19:04:27.535Z,1569265467.535 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2019-09-23T19:04:27.535Z,1569265467.535 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2019-09-23T19:04:27.535Z,1569265467.535 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2019-09-23T19:04:27.549Z,1569265467.549 [CBIT](DEBUG): Deactivating GF circuits.
2019-09-23T19:04:27.549Z,1569265467.549 [CBIT](DEBUG): Deactivating emergency mode.
2019-09-23T19:04:27.585Z,1569265467.585 [CBIT](DEBUG): Backplane powered.
2019-09-23T19:04:27.586Z,1569265467.586 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2019-09-23T19:04:27.595Z,1569265467.595 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2019-09-23T19:04:27.606Z,1569265467.606 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2019-09-23T19:04:27.606Z,1569265467.606 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2019-09-23T19:04:27.676Z,1569265467.676 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2019-09-23T19:04:27.677Z,1569265467.677 [Default:A.Wait](DEBUG): Construct Wait.
2019-09-23T19:04:27.679Z,1569265467.679 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2019-09-23T19:04:27.726Z,1569265467.726 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2019-09-23T19:04:27.728Z,1569265467.728 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2019-09-23T19:04:27.750Z,1569265467.750 [Default:E.Execute](DEBUG): Construct Execute.
2019-09-23T19:04:27.753Z,1569265467.753 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xmlns="Tethys"
         xmlns:Units="Tethys/Units"
         xmlns:Guidance="Tethys/Guidance"
         xmlns:Universal="Tethys/Universal"
         xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                             Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                             Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                             Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
         Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Sequence/>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn on</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2019-09-23T19:04:27.765Z,1569265467.765 [controlThread](DEBUG): Component order: CycleStarter,AHRS_M2,Depth_Keller,DropWeight,DVL_micro,NAL9602,Onboard,DAT,BPC1,BR_Ping1D,PAR_Licor,Depth_Keller,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,YawRateCalculator,ElevatorOffsetCalculator,DeadReckonUsingMultipleVelocitySources,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2019-09-23T19:04:27.773Z,1569265467.773 [AHRS_M2](DEBUG): Initializing AHRS_M2.
2019-09-23T19:04:27.829Z,1569265467.829 [Depth_Keller](ERROR): Pressure reading out of range: 1925.893799 decibar
2019-09-23T19:04:27.877Z,1569265467.877 [Radio_Surface](INFO): Powering up
2019-09-23T19:04:27.892Z,1569265467.892 [DVL_micro](INFO): Initializing
2019-09-23T19:04:27.970Z,1569265467.970 [DAT](INFO): Powered 24V power converter LCB with command: ! echo 1 > /dev/loadB2
2019-09-23T19:04:27.970Z,1569265467.970 [DAT](INFO): Powering up
2019-09-23T19:04:27.970Z,1569265467.970 [DAT](DEBUG): Initializing DAT.
2019-09-23T19:04:28.017Z,1569265468.017 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2019-09-23T19:04:28.146Z,1569265468.146 [DepthRateCalculator](ERROR): Depth measurement is not active
2019-09-23T19:04:28.359Z,1569265468.359 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2019-09-23T19:04:28.365Z,1569265468.365 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2019-09-23T19:04:28.372Z,1569265468.372 [ElevatorServo](DEBUG): Initializing EZServoServo.
2019-09-23T19:04:28.377Z,1569265468.377 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2019-09-23T19:04:28.383Z,1569265468.383 [MassServo](DEBUG): Initializing EZServoServo.
2019-09-23T19:04:28.389Z,1569265468.389 [MassServo](DEBUG): Initializing MassServo.
2019-09-23T19:04:28.395Z,1569265468.395 [RudderServo](DEBUG): Initializing EZServoServo.
2019-09-23T19:04:28.401Z,1569265468.401 [RudderServo](DEBUG): Initializing RudderServo.
2019-09-23T19:04:28.407Z,1569265468.407 [ThrusterServo](DEBUG): Initializing EZServoServo.
2019-09-23T19:04:28.413Z,1569265468.413 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2019-09-23T19:04:29.269Z,1569265469.269 [RudderServo](ERROR): Rudder initialization uart error serial timeout
2019-09-23T19:04:29.269Z,1569265469.269 [RudderServo](FAULT): Rudder failed to initialize
2019-09-23T19:04:29.269Z,1569265469.269 [RudderServo] Communications Fault, FailCount= 1
2019-09-23T19:04:29.269Z,1569265469.269 [RudderServo](ERROR): Communications Fault
2019-09-23T19:04:29.380Z,1569265469.380 [CBIT](ERROR): Communications Fault in component: RudderServo
2019-09-23T19:04:29.618Z,1569265469.618 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2019-09-23T19:04:29.618Z,1569265469.618 [RudderServo](INFO): Powering down
2019-09-23T19:04:30.248Z,1569265470.248 [RudderServo](DEBUG): Initializing EZServoServo.
2019-09-23T19:04:30.366Z,1569265470.366 [RudderServo](DEBUG): Initializing RudderServo.
2019-09-23T19:04:30.370Z,1569265470.370 [CBIT](INFO): Clearing failed state for component RudderServo
2019-09-23T19:04:30.370Z,1569265470.370 [RudderServo] No Fault, FailCount= 1
2019-09-23T19:04:41.219Z,1569265481.219 [DAT](INFO): setting local address to 5
2019-09-23T19:04:41.625Z,1569265481.625 [DAT](INFO): set local address to 5
2019-09-23T19:04:42.010Z,1569265482.010 [DVL_micro](ERROR): No DVL communication! Re-initializing
2019-09-23T19:04:42.010Z,1569265482.010 [DVL_micro] Communications Fault, FailCount= 1
2019-09-23T19:04:42.011Z,1569265482.011 [DVL_micro](ERROR): Communications Fault
2019-09-23T19:04:42.100Z,1569265482.100 [CBIT](ERROR): Communications Fault in component: DVL_micro
2019-09-23T19:04:42.485Z,1569265482.485 [DVL_micro](INFO): uninitialize:Powering down
2019-09-23T19:04:43.322Z,1569265483.322 [CBIT](INFO): Clearing failed state for component DVL_micro
2019-09-23T19:04:43.322Z,1569265483.322 [DVL_micro] No Fault, FailCount= 1
2019-09-23T19:04:43.632Z,1569265483.632 [DVL_micro](INFO): Initializing
2019-09-23T19:04:48.147Z,1569265488.147 [SBIT](IMPORTANT): Beginning Startup BIT
2019-09-23T19:04:48.159Z,1569265488.159 [CBIT](IMPORTANT): Beginning ground fault scan
2019-09-23T19:04:54.231Z,1569265494.231 [NAL9602](INFO): Powering up NAL9602
2019-09-23T19:04:57.462Z,1569265497.462 [DVL_micro](ERROR): No DVL communication! Re-initializing
2019-09-23T19:04:57.462Z,1569265497.462 [DVL_micro] Communications Fault, FailCount= 2
2019-09-23T19:04:57.462Z,1569265497.462 [DVL_micro](ERROR): Communications Fault
2019-09-23T19:04:57.579Z,1569265497.579 [CBIT](ERROR): Communications Fault in component: DVL_micro
2019-09-23T19:04:57.937Z,1569265497.937 [DVL_micro](INFO): uninitialize:Powering down
2019-09-23T19:04:58.878Z,1569265498.878 [CBIT](INFO): Clearing failed state for component DVL_micro
2019-09-23T19:04:58.878Z,1569265498.878 [DVL_micro] No Fault, FailCount= 2
2019-09-23T19:04:59.092Z,1569265499.092 [DVL_micro](INFO): Initializing
2019-09-23T19:04:59.195Z,1569265499.195 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.028449
CHAN A1 (24V): 0.017476
CHAN A2 (12V): -0.019066
CHAN A3 (5V): -0.028778
CHAN B0 (3.3V): -0.012587
CHAN B1 (3.15aV): -0.007605
CHAN B2 (3.15bV): -0.004775
CHAN B3 (GND): -0.014053
OPEN: 0.006133
Full Scale Calc: 4.765 mA, -1.589 mA
2019-09-23T19:05:05.311Z,1569265505.311 [NAL9602](INFO): NAL9602 initialized
2019-09-23T19:05:06.133Z,1569265506.133 [NAL9602](DEBUG): Fix Requested
2019-09-23T19:05:12.990Z,1569265512.990 [DVL_micro](ERROR): No DVL communication! Re-initializing
2019-09-23T19:05:12.991Z,1569265512.991 [DVL_micro] Communications Fault, FailCount= 3
2019-09-23T19:05:12.991Z,1569265512.991 [DVL_micro](ERROR): Communications Fault
2019-09-23T19:05:13.131Z,1569265513.131 [CBIT](ERROR): Communications Fault in component: DVL_micro
2019-09-23T19:05:13.477Z,1569265513.477 [DVL_micro](INFO): uninitialize:Powering down
2019-09-23T19:05:14.374Z,1569265514.374 [CBIT](INFO): Clearing failed state for component DVL_micro
2019-09-23T19:05:14.374Z,1569265514.374 [DVL_micro] No Fault, FailCount= 3
2019-09-23T19:05:14.608Z,1569265514.608 [DVL_micro](INFO): Initializing
2019-09-23T19:05:28.339Z,1569265528.339 [DVL_micro](ERROR): No DVL communication! Re-initializing
2019-09-23T19:05:28.339Z,1569265528.339 [DVL_micro] Communications Fault, FailCount= 4
2019-09-23T19:05:28.339Z,1569265528.339 [DVL_micro](ERROR): Communications Fault
2019-09-23T19:05:28.430Z,1569265528.430 [CBIT](ERROR): Communications Fault in component: DVL_micro
2019-09-23T19:05:28.809Z,1569265528.809 [DVL_micro](INFO): uninitialize:Powering down
2019-09-23T19:05:29.818Z,1569265529.818 [CBIT](INFO): Clearing failed state for component DVL_micro
2019-09-23T19:05:29.818Z,1569265529.818 [DVL_micro] No Fault, FailCount= 4
2019-09-23T19:05:29.961Z,1569265529.961 [DVL_micro](INFO): Initializing
2019-09-23T19:05:33.141Z,1569265533.141 [CommandLine](IMPORTANT): got command configSet BR_Ping1D.verbosity 2.000000 count
2019-09-23T19:05:33.324Z,1569265533.324 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:05:33.738Z,1569265533.738 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:05:34.124Z,1569265534.124 [BR_Ping1D](INFO): startup done
2019-09-23T19:05:34.529Z,1569265534.529 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:05:34.529Z,1569265534.529 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:05:34.529Z,1569265534.529 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:05:34.530Z,1569265534.530 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:05:35.362Z,1569265535.362 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:05:36.171Z,1569265536.171 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:05:36.561Z,1569265536.561 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:05:36.960Z,1569265536.960 [BR_Ping1D](INFO): startup done
2019-09-23T19:05:37.374Z,1569265537.374 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:05:37.374Z,1569265537.374 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:05:37.374Z,1569265537.374 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:05:37.375Z,1569265537.375 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:05:38.186Z,1569265538.186 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:05:38.980Z,1569265538.980 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:05:39.388Z,1569265539.388 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:05:39.795Z,1569265539.795 [BR_Ping1D](INFO): startup done
2019-09-23T19:05:40.219Z,1569265540.219 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:05:40.220Z,1569265540.220 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:05:40.220Z,1569265540.220 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:05:40.220Z,1569265540.220 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:05:41.074Z,1569265541.074 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:05:41.456Z,1569265541.456 [SBIT](IMPORTANT): SBIT PASSED
2019-09-23T19:05:41.494Z,1569265541.494 [CommandLine](IMPORTANT): got command configSet list
2019-09-23T19:05:41.494Z,1569265541.494 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2019-09-23T19:05:41.495Z,1569265541.495 [CommandLine](IMPORTANT): BR_Ping1D.verbosity=0 count;

2019-09-23T19:05:41.495Z,1569265541.495 [CommandLine](IMPORTANT): CBIT.gf24Offset=150 microampere;

2019-09-23T19:05:41.495Z,1569265541.495 [CommandLine](IMPORTANT): VerticalControl.massDefault=0 millimeter;

2019-09-23T19:05:41.890Z,1569265541.890 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:05:41.909Z,1569265541.909 [MissionManager](IMPORTANT): Started mission Startup
2019-09-23T19:05:41.910Z,1569265541.910 [Startup] Running Loop=1
2019-09-23T19:05:41.910Z,1569265541.910 [Startup](DEBUG): Aggregate::initialize Startup
2019-09-23T19:05:41.910Z,1569265541.910 [Startup:A.GoToSurface] Running Loop=1
2019-09-23T19:05:41.910Z,1569265541.910 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2019-09-23T19:05:41.910Z,1569265541.910 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2019-09-23T19:05:41.911Z,1569265541.911 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2019-09-23T19:05:41.911Z,1569265541.911 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2019-09-23T19:05:41.912Z,1569265541.912 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2019-09-23T19:05:41.912Z,1569265541.912 [Startup:A.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2019-09-23T19:05:41.943Z,1569265541.943 [Startup:StartupSatComms] Running Loop=1
2019-09-23T19:05:41.943Z,1569265541.943 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2019-09-23T19:05:41.943Z,1569265541.943 [Startup:StartupSatComms:A] Running Loop=1
2019-09-23T19:05:42.237Z,1569265542.237 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:05:42.268Z,1569265542.268 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2019-09-23T19:05:42.630Z,1569265542.630 [BR_Ping1D](INFO): startup done
2019-09-23T19:05:43.045Z,1569265543.045 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:05:43.045Z,1569265543.045 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:05:43.045Z,1569265543.045 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:05:43.046Z,1569265543.046 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:05:43.807Z,1569265543.807 [DVL_micro](ERROR): No DVL communication! Re-initializing
2019-09-23T19:05:43.807Z,1569265543.807 [DVL_micro] Communications Fault, FailCount= 5
2019-09-23T19:05:43.807Z,1569265543.807 [DVL_micro](ERROR): Communications Fault
2019-09-23T19:05:43.826Z,1569265543.826 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:05:43.906Z,1569265543.906 [CBIT](ERROR): Communications Fault in component: DVL_micro
2019-09-23T19:05:43.907Z,1569265543.907 [CBIT](CRITICAL): Communications Fault in component: DVL_micro
2019-09-23T19:05:44.273Z,1569265544.273 [DVL_micro](INFO): uninitialize:Powering down
2019-09-23T19:05:44.342Z,1569265544.342 [CommandLine](FAULT): Scheduling is paused
2019-09-23T19:05:44.343Z,1569265544.343 [CBIT](INFO): Critical error at 20190923T190543
2019-09-23T19:05:44.343Z,1569265544.343 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2019-09-23T19:05:44.650Z,1569265544.650 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:05:45.036Z,1569265545.036 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:05:45.444Z,1569265545.444 [BR_Ping1D](INFO): startup done
2019-09-23T19:05:45.852Z,1569265545.852 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:05:45.852Z,1569265545.852 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:05:45.852Z,1569265545.852 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:05:45.852Z,1569265545.852 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:05:46.647Z,1569265546.647 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:05:47.467Z,1569265547.467 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:05:47.867Z,1569265547.867 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:05:48.263Z,1569265548.263 [BR_Ping1D](INFO): startup done
2019-09-23T19:05:48.668Z,1569265548.668 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:05:48.668Z,1569265548.668 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:05:48.669Z,1569265548.669 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:05:48.669Z,1569265548.669 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:05:49.490Z,1569265549.490 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:05:50.291Z,1569265550.291 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:05:50.696Z,1569265550.696 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:05:51.095Z,1569265551.095 [BR_Ping1D](INFO): startup done
2019-09-23T19:05:51.496Z,1569265551.496 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:05:51.497Z,1569265551.497 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:05:51.497Z,1569265551.497 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:05:51.497Z,1569265551.497 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:05:52.315Z,1569265552.315 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:05:53.125Z,1569265553.125 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:05:53.531Z,1569265553.531 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:05:53.928Z,1569265553.928 [BR_Ping1D](INFO): startup done
2019-09-23T19:05:54.324Z,1569265554.324 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:05:54.324Z,1569265554.324 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:05:54.324Z,1569265554.324 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:05:54.325Z,1569265554.325 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:05:55.212Z,1569265555.212 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:05:55.966Z,1569265555.966 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:05:56.362Z,1569265556.362 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:05:56.758Z,1569265556.758 [BR_Ping1D](INFO): startup done
2019-09-23T19:05:57.152Z,1569265557.152 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:05:57.152Z,1569265557.152 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:05:57.153Z,1569265557.153 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:05:57.153Z,1569265557.153 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:05:57.964Z,1569265557.964 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:05:58.768Z,1569265558.768 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:05:59.171Z,1569265559.171 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:05:59.580Z,1569265559.580 [BR_Ping1D](INFO): startup done
2019-09-23T19:05:59.988Z,1569265559.988 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:05:59.989Z,1569265559.989 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:05:59.989Z,1569265559.989 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:05:59.989Z,1569265559.989 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:00.788Z,1569265560.788 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:01.614Z,1569265561.614 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:01.000Z,1569265562.000 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:02.407Z,1569265562.407 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:02.823Z,1569265562.823 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:02.823Z,1569265562.823 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:02.824Z,1569265562.824 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:02.824Z,1569265562.824 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:03.620Z,1569265563.620 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:04.434Z,1569265564.434 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:04.831Z,1569265564.831 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:05.236Z,1569265565.236 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:05.658Z,1569265565.658 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:05.659Z,1569265565.659 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:05.659Z,1569265565.659 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:05.659Z,1569265565.659 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:06.443Z,1569265566.443 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:07.263Z,1569265567.263 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:07.729Z,1569265567.729 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:08.082Z,1569265568.082 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:08.552Z,1569265568.552 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:08.553Z,1569265568.553 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:08.553Z,1569265568.553 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:08.554Z,1569265568.554 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:09.290Z,1569265569.290 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:10.097Z,1569265570.097 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:10.492Z,1569265570.492 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:10.888Z,1569265570.888 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:11.292Z,1569265571.292 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:11.292Z,1569265571.292 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:11.292Z,1569265571.292 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:11.292Z,1569265571.292 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:12.109Z,1569265572.109 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:12.908Z,1569265572.908 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:13.324Z,1569265573.324 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:13.723Z,1569265573.723 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:14.147Z,1569265574.147 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:14.147Z,1569265574.147 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:14.147Z,1569265574.147 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:14.148Z,1569265574.148 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:14.953Z,1569265574.953 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:15.739Z,1569265575.739 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:16.139Z,1569265576.139 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:16.556Z,1569265576.556 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:16.952Z,1569265576.952 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:16.953Z,1569265576.953 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:16.953Z,1569265576.953 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:16.953Z,1569265576.953 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:17.763Z,1569265577.763 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:18.574Z,1569265578.574 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:18.989Z,1569265578.989 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:19.389Z,1569265579.389 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:19.794Z,1569265579.794 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:19.794Z,1569265579.794 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:19.794Z,1569265579.794 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:19.795Z,1569265579.795 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:20.584Z,1569265580.584 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:21.473Z,1569265581.473 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:21.884Z,1569265581.884 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:22.234Z,1569265582.234 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:22.635Z,1569265582.635 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:22.635Z,1569265582.635 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:22.635Z,1569265582.635 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:22.636Z,1569265582.636 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:23.422Z,1569265583.422 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:24.233Z,1569265584.233 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:24.637Z,1569265584.637 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:25.046Z,1569265585.046 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:25.432Z,1569265585.432 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:25.432Z,1569265585.432 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:25.433Z,1569265585.433 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:25.433Z,1569265585.433 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:26.247Z,1569265586.247 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:27.051Z,1569265587.051 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:27.463Z,1569265587.463 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:27.866Z,1569265587.866 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:28.260Z,1569265588.260 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:28.260Z,1569265588.260 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:28.260Z,1569265588.260 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:28.261Z,1569265588.261 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:29.090Z,1569265589.090 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:29.879Z,1569265589.879 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:30.291Z,1569265590.291 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:30.697Z,1569265590.697 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:31.093Z,1569265591.093 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:31.093Z,1569265591.093 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:31.093Z,1569265591.093 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:31.094Z,1569265591.094 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:31.913Z,1569265591.913 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:32.729Z,1569265592.729 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:33.131Z,1569265593.131 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:33.527Z,1569265593.527 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:33.938Z,1569265593.938 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:33.938Z,1569265593.938 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:33.939Z,1569265593.939 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:33.939Z,1569265593.939 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:34.809Z,1569265594.809 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:35.570Z,1569265595.570 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:35.966Z,1569265595.966 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:36.374Z,1569265596.374 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:36.756Z,1569265596.756 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:36.756Z,1569265596.756 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:36.756Z,1569265596.756 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:36.757Z,1569265596.757 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:37.555Z,1569265597.555 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:38.371Z,1569265598.371 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:38.770Z,1569265598.770 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:39.167Z,1569265599.167 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:39.572Z,1569265599.572 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:39.572Z,1569265599.572 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:39.572Z,1569265599.572 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:39.573Z,1569265599.573 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:40.399Z,1569265600.399 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:41.187Z,1569265601.187 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:41.598Z,1569265601.598 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:42.006Z,1569265602.006 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:42.034Z,1569265602.034 [Startup:StartupSatComms:A](INFO): Timed out from 2019-09-23T19:05:41.9Z
2019-09-23T19:06:42.034Z,1569265602.034 [Startup:StartupSatComms:A] Stopped
2019-09-23T19:06:42.034Z,1569265602.034 [Startup:StartupSatComms:B] Running Loop=1
2019-09-23T19:06:42.404Z,1569265602.404 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:42.404Z,1569265602.404 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:42.413Z,1569265602.413 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:42.413Z,1569265602.413 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:42.456Z,1569265602.456 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2019-09-23T19:06:43.216Z,1569265603.216 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:44.045Z,1569265604.045 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:44.428Z,1569265604.428 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:44.828Z,1569265604.828 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:45.239Z,1569265605.239 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:45.239Z,1569265605.239 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:45.239Z,1569265605.239 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:45.239Z,1569265605.239 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:46.039Z,1569265606.039 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:46.862Z,1569265606.862 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:47.248Z,1569265607.248 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:47.651Z,1569265607.651 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:48.140Z,1569265608.140 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:48.151Z,1569265608.151 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:48.151Z,1569265608.151 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:48.151Z,1569265608.151 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:48.894Z,1569265608.894 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:49.694Z,1569265609.694 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:50.084Z,1569265610.084 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:50.479Z,1569265610.479 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:50.892Z,1569265610.892 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:50.892Z,1569265610.892 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:50.892Z,1569265610.892 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:50.892Z,1569265610.892 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:51.707Z,1569265611.707 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:52.516Z,1569265612.516 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:52.918Z,1569265612.918 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:53.311Z,1569265613.311 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:53.713Z,1569265613.713 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:53.713Z,1569265613.713 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:53.713Z,1569265613.713 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:53.714Z,1569265613.714 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:54.530Z,1569265614.530 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:55.332Z,1569265615.332 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:55.736Z,1569265615.736 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:56.147Z,1569265616.147 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:56.563Z,1569265616.563 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:56.563Z,1569265616.563 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:56.563Z,1569265616.563 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:56.564Z,1569265616.564 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:06:57.355Z,1569265617.355 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:06:58.155Z,1569265618.155 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:06:58.559Z,1569265618.559 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:06:58.968Z,1569265618.968 [BR_Ping1D](INFO): startup done
2019-09-23T19:06:59.375Z,1569265619.375 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:06:59.375Z,1569265619.375 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:06:59.375Z,1569265619.375 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:06:59.376Z,1569265619.376 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:00.180Z,1569265620.180 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:01.002Z,1569265621.002 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:01.483Z,1569265621.483 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:01.887Z,1569265621.887 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:02.240Z,1569265622.240 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:02.240Z,1569265622.240 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:02.240Z,1569265622.240 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:02.241Z,1569265622.241 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:03.018Z,1569265623.018 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:03.823Z,1569265623.823 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:04.226Z,1569265624.226 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:04.619Z,1569265624.619 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:05.028Z,1569265625.028 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:05.029Z,1569265625.029 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:05.029Z,1569265625.029 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:05.030Z,1569265625.030 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:05.860Z,1569265625.860 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:06.661Z,1569265626.661 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:07.068Z,1569265627.068 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:07.069Z,1569265627.069 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:07:07.455Z,1569265627.455 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:07.851Z,1569265627.851 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:07:08.263Z,1569265628.263 [BR_Ping1D](ERROR): Using more than 1 sec to receive one packet, resetting UART
2019-09-23T19:07:08.263Z,1569265628.263 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:08.264Z,1569265628.264 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:08.264Z,1569265628.264 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:08.264Z,1569265628.264 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:08.265Z,1569265628.265 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:08.266Z,1569265628.266 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:08.266Z,1569265628.266 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:08.266Z,1569265628.266 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:08.267Z,1569265628.267 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:09.063Z,1569265629.063 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:09.884Z,1569265629.884 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:10.279Z,1569265630.279 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:10.701Z,1569265630.701 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:11.102Z,1569265631.102 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:11.102Z,1569265631.102 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:11.103Z,1569265631.103 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:11.103Z,1569265631.103 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:11.905Z,1569265631.905 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:12.703Z,1569265632.703 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:13.111Z,1569265633.111 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:13.518Z,1569265633.518 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:13.913Z,1569265633.913 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:13.913Z,1569265633.913 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:13.913Z,1569265633.913 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:13.914Z,1569265633.914 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:14.804Z,1569265634.804 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:15.578Z,1569265635.578 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:15.986Z,1569265635.986 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:16.362Z,1569265636.362 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:16.740Z,1569265636.740 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:16.740Z,1569265636.740 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:16.740Z,1569265636.740 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:16.741Z,1569265636.741 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:17.558Z,1569265637.558 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:18.383Z,1569265638.383 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:18.776Z,1569265638.776 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:19.173Z,1569265639.173 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:19.572Z,1569265639.572 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:19.572Z,1569265639.572 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:19.572Z,1569265639.572 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:19.573Z,1569265639.573 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:20.376Z,1569265640.376 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:21.195Z,1569265641.195 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:21.591Z,1569265641.591 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:21.996Z,1569265641.996 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:22.407Z,1569265642.407 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:22.407Z,1569265642.407 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:22.407Z,1569265642.407 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:22.408Z,1569265642.408 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:23.209Z,1569265643.209 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:24.019Z,1569265644.019 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:24.416Z,1569265644.416 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:24.824Z,1569265644.824 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:25.277Z,1569265645.277 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:25.277Z,1569265645.277 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:25.277Z,1569265645.277 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:25.278Z,1569265645.278 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:26.032Z,1569265646.032 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:26.862Z,1569265646.862 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:27.278Z,1569265647.278 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:27.278Z,1569265647.278 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:07:27.652Z,1569265647.652 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:27.703Z,1569265647.703 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2019-09-23T19:07:27.703Z,1569265647.703 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2019-09-23T19:07:27.727Z,1569265647.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2019-09-23T19:07:28.186Z,1569265648.186 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:07:28.236Z,1569265648.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2019-09-23T19:07:28.236Z,1569265648.236 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2019-09-23T19:07:28.623Z,1569265648.623 [BR_Ping1D](ERROR): Using more than 1 sec to receive one packet, resetting UART
2019-09-23T19:07:28.623Z,1569265648.623 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:28.624Z,1569265648.624 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:28.624Z,1569265648.624 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:28.624Z,1569265648.624 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:28.629Z,1569265648.629 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:28.630Z,1569265648.630 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:28.630Z,1569265648.630 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:28.630Z,1569265648.630 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:28.631Z,1569265648.631 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:29.294Z,1569265649.294 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:30.088Z,1569265650.088 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:30.479Z,1569265650.479 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:30.890Z,1569265650.890 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:31.321Z,1569265651.321 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:31.322Z,1569265651.322 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:31.322Z,1569265651.322 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:31.322Z,1569265651.322 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:32.094Z,1569265652.094 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:32.508Z,1569265652.508 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.004799
2019-09-23T19:07:32.914Z,1569265652.914 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:33.326Z,1569265653.326 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:33.710Z,1569265653.710 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:34.125Z,1569265654.125 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:34.125Z,1569265654.125 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:34.125Z,1569265654.125 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:34.126Z,1569265654.126 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:34.927Z,1569265654.927 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:35.749Z,1569265655.749 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:36.155Z,1569265656.155 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:36.558Z,1569265656.558 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:36.954Z,1569265656.954 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:36.955Z,1569265656.955 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:36.955Z,1569265656.955 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:36.955Z,1569265656.955 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:37.763Z,1569265657.763 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:38.558Z,1569265658.558 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:38.972Z,1569265658.972 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:38.972Z,1569265658.972 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:07:39.377Z,1569265659.377 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:39.771Z,1569265659.771 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:07:40.184Z,1569265660.184 [BR_Ping1D](ERROR): Using more than 1 sec to receive one packet, resetting UART
2019-09-23T19:07:40.184Z,1569265660.184 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:40.185Z,1569265660.185 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:40.185Z,1569265660.185 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:40.185Z,1569265660.185 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:40.186Z,1569265660.186 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:40.186Z,1569265660.186 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:40.187Z,1569265660.187 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:40.187Z,1569265660.187 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:40.187Z,1569265660.187 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:41.003Z,1569265661.003 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:41.820Z,1569265661.820 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20190923T185935/Courier0004.lzma
2019-09-23T19:07:41.956Z,1569265661.956 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:42.216Z,1569265662.216 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:42.217Z,1569265662.217 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:07:42.226Z,1569265662.226 [Startup:StartupSatComms:B](INFO): Timed out from 2019-09-23T19:06:42.0Z
2019-09-23T19:07:42.226Z,1569265662.226 [Startup:StartupSatComms:B] Stopped
2019-09-23T19:07:42.226Z,1569265662.226 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2019-09-23T19:07:42.226Z,1569265662.226 [Startup:StartupSatComms] Stopped
2019-09-23T19:07:42.226Z,1569265662.226 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2019-09-23T19:07:42.227Z,1569265662.227 [Startup](INFO): Completed Startup
2019-09-23T19:07:42.227Z,1569265662.227 [MissionManager](INFO): Startup is completed.
2019-09-23T19:07:42.227Z,1569265662.227 [MissionManager](INFO): Uninitializing Mission Startup
2019-09-23T19:07:42.227Z,1569265662.227 [Startup] Stopped
2019-09-23T19:07:42.227Z,1569265662.227 [Startup](DEBUG): Aggregate::uninitialize Startup
2019-09-23T19:07:42.227Z,1569265662.227 [Startup:A.GoToSurface] Stopped
2019-09-23T19:07:42.228Z,1569265662.228 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2019-09-23T19:07:42.630Z,1569265662.630 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:42.656Z,1569265662.656 [MissionManager](IMPORTANT): Started mission Default
2019-09-23T19:07:42.656Z,1569265662.656 [Default] Running Loop=1
2019-09-23T19:07:42.657Z,1569265662.657 [Default](DEBUG): Aggregate::initialize Default
2019-09-23T19:07:42.657Z,1569265662.657 [Default:B.GoToSurface] Running Loop=1
2019-09-23T19:07:42.657Z,1569265662.657 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2019-09-23T19:07:42.657Z,1569265662.657 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2019-09-23T19:07:42.658Z,1569265662.658 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2019-09-23T19:07:42.658Z,1569265662.658 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2019-09-23T19:07:42.658Z,1569265662.658 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2019-09-23T19:07:42.659Z,1569265662.659 [Default:B.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2019-09-23T19:07:42.659Z,1569265662.659 [Default:A.Wait] Running Loop=1
2019-09-23T19:07:42.659Z,1569265662.659 [Default:A.Wait](DEBUG): Initialize Wait Component.
2019-09-23T19:07:43.034Z,1569265663.034 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:07:43.414Z,1569265663.414 [BR_Ping1D](ERROR): Using more than 1 sec to receive one packet, resetting UART
2019-09-23T19:07:43.414Z,1569265663.414 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:43.415Z,1569265663.415 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:43.415Z,1569265663.415 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:43.415Z,1569265663.415 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:43.416Z,1569265663.416 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:43.417Z,1569265663.417 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:43.417Z,1569265663.417 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:43.417Z,1569265663.417 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:43.418Z,1569265663.418 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:43.826Z,1569265663.826 [DataOverHttps](INFO): Moved sent file to Logs/20190923T185935/Courier0004.lzma.bak
2019-09-23T19:07:43.826Z,1569265663.826 [DataOverHttps](INFO): SBD MOMSN=11804397
2019-09-23T19:07:44.215Z,1569265664.215 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:45.037Z,1569265665.037 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:45.451Z,1569265665.451 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:45.843Z,1569265665.843 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:46.246Z,1569265666.246 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:46.247Z,1569265666.247 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:46.247Z,1569265666.247 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:46.247Z,1569265666.247 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:47.039Z,1569265667.039 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:47.858Z,1569265667.858 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:48.251Z,1569265668.251 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:48.657Z,1569265668.657 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:49.067Z,1569265669.067 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:49.068Z,1569265669.068 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:49.068Z,1569265669.068 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:49.068Z,1569265669.068 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:49.867Z,1569265669.867 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:50.709Z,1569265670.709 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:51.102Z,1569265671.102 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:51.511Z,1569265671.511 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:51.910Z,1569265671.910 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:51.910Z,1569265671.910 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:51.910Z,1569265671.910 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:51.911Z,1569265671.911 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:52.696Z,1569265672.696 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:53.508Z,1569265673.508 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:53.916Z,1569265673.916 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:53.917Z,1569265673.917 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:07:54.311Z,1569265674.311 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:54.720Z,1569265674.720 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:07:55.258Z,1569265675.258 [BR_Ping1D](ERROR): Using more than 1 sec to receive one packet, resetting UART
2019-09-23T19:07:55.258Z,1569265675.258 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:55.259Z,1569265675.259 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:55.259Z,1569265675.259 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:55.259Z,1569265675.259 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:55.260Z,1569265675.260 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:55.261Z,1569265675.261 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:55.261Z,1569265675.261 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:55.262Z,1569265675.262 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:55.262Z,1569265675.262 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:55.970Z,1569265675.970 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:56.030Z,1569265676.030 [Default:A.Wait](INFO): Done Waiting.
2019-09-23T19:07:56.030Z,1569265676.030 [Default:A.Wait] Stopped
2019-09-23T19:07:56.030Z,1569265676.030 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2019-09-23T19:07:56.408Z,1569265676.408 [Default:CheckIn] Running Loop=1
2019-09-23T19:07:56.415Z,1569265676.415 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2019-09-23T19:07:56.415Z,1569265676.415 [Default:CheckIn:Read_GPS] Running Loop=1
2019-09-23T19:07:56.757Z,1569265676.757 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:56.780Z,1569265676.780 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2019-09-23T19:07:57.160Z,1569265677.160 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:07:57.560Z,1569265677.560 [BR_Ping1D](INFO): startup done
2019-09-23T19:07:57.972Z,1569265677.972 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:07:57.972Z,1569265677.972 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:07:57.972Z,1569265677.972 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:07:57.973Z,1569265677.973 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:07:58.773Z,1569265678.773 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:07:59.569Z,1569265679.569 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:07:59.976Z,1569265679.976 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:00.390Z,1569265680.390 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:00.809Z,1569265680.809 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:00.809Z,1569265680.809 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:00.810Z,1569265680.810 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:00.810Z,1569265680.810 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:01.600Z,1569265681.600 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:02.397Z,1569265682.397 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:02.822Z,1569265682.822 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:03.218Z,1569265683.218 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:03.638Z,1569265683.638 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:03.638Z,1569265683.638 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:03.638Z,1569265683.638 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:03.639Z,1569265683.639 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:04.428Z,1569265684.428 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:05.223Z,1569265685.223 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:05.641Z,1569265685.641 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:06.047Z,1569265686.047 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:06.438Z,1569265686.438 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:06.438Z,1569265686.438 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:06.438Z,1569265686.438 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:06.439Z,1569265686.439 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:07.262Z,1569265687.262 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:08.081Z,1569265688.081 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:08.623Z,1569265688.623 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:09.036Z,1569265689.036 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:09.304Z,1569265689.304 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:09.304Z,1569265689.304 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:09.304Z,1569265689.304 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:09.305Z,1569265689.305 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:10.082Z,1569265690.082 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:10.891Z,1569265690.891 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:11.284Z,1569265691.284 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:11.691Z,1569265691.691 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:12.117Z,1569265692.117 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:12.117Z,1569265692.117 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:12.117Z,1569265692.117 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:12.118Z,1569265692.118 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:12.912Z,1569265692.912 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:13.733Z,1569265693.733 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:14.109Z,1569265694.109 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:14.109Z,1569265694.109 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:08:14.529Z,1569265694.529 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:14.932Z,1569265694.932 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:08:15.325Z,1569265695.325 [BR_Ping1D](ERROR): Using more than 1 sec to receive one packet, resetting UART
2019-09-23T19:08:15.325Z,1569265695.325 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:15.326Z,1569265695.326 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:15.326Z,1569265695.326 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:15.326Z,1569265695.326 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:15.327Z,1569265695.327 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:15.328Z,1569265695.328 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:15.328Z,1569265695.328 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:15.328Z,1569265695.328 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:15.328Z,1569265695.328 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:16.129Z,1569265696.129 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:16.952Z,1569265696.952 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:17.340Z,1569265697.340 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:17.341Z,1569265697.341 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:08:17.795Z,1569265697.795 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:18.176Z,1569265698.176 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:08:18.574Z,1569265698.574 [BR_Ping1D](ERROR): Using more than 1 sec to receive one packet, resetting UART
2019-09-23T19:08:18.574Z,1569265698.574 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:18.574Z,1569265698.574 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:18.574Z,1569265698.574 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:18.575Z,1569265698.575 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:18.575Z,1569265698.575 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:18.576Z,1569265698.576 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:18.576Z,1569265698.576 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:18.576Z,1569265698.576 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:18.577Z,1569265698.577 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:19.380Z,1569265699.380 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:20.173Z,1569265700.173 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:20.582Z,1569265700.582 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:20.994Z,1569265700.994 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:21.385Z,1569265701.385 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:21.385Z,1569265701.385 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:21.385Z,1569265701.385 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:21.386Z,1569265701.386 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:22.211Z,1569265702.211 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:22.819Z,1569265702.819 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:23.088Z,1569265703.088 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:23.435Z,1569265703.435 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:23.835Z,1569265703.835 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:23.835Z,1569265703.835 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:23.835Z,1569265703.835 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:23.836Z,1569265703.836 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:24.619Z,1569265704.619 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:25.432Z,1569265705.432 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:25.837Z,1569265705.837 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:26.232Z,1569265706.232 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:26.647Z,1569265706.647 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:26.647Z,1569265706.647 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:26.647Z,1569265706.647 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:26.648Z,1569265706.648 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:27.446Z,1569265707.446 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:28.268Z,1569265708.268 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:28.677Z,1569265708.677 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:29.103Z,1569265709.103 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:29.483Z,1569265709.483 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:29.483Z,1569265709.483 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:29.483Z,1569265709.483 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:29.484Z,1569265709.484 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:30.276Z,1569265710.276 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:31.093Z,1569265711.093 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:31.502Z,1569265711.502 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:31.890Z,1569265711.890 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:32.303Z,1569265712.303 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:32.303Z,1569265712.303 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:32.303Z,1569265712.303 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:32.304Z,1569265712.304 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:33.105Z,1569265713.105 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:33.930Z,1569265713.930 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:34.343Z,1569265714.343 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:34.752Z,1569265714.752 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:35.322Z,1569265715.322 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:35.322Z,1569265715.322 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:35.322Z,1569265715.322 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:35.323Z,1569265715.323 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:35.954Z,1569265715.954 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:36.494Z,1569265716.494 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:36.739Z,1569265716.739 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:37.162Z,1569265717.162 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:37.567Z,1569265717.567 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:37.567Z,1569265717.567 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:37.567Z,1569265717.567 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:37.568Z,1569265717.568 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:38.352Z,1569265718.352 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:39.187Z,1569265719.187 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:39.603Z,1569265719.603 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:39.987Z,1569265719.987 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:40.384Z,1569265720.384 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:40.384Z,1569265720.384 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:40.384Z,1569265720.384 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:40.385Z,1569265720.385 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:41.188Z,1569265721.188 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:41.989Z,1569265721.989 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:42.411Z,1569265722.411 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:42.815Z,1569265722.815 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:43.212Z,1569265723.212 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:43.213Z,1569265723.213 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:43.213Z,1569265723.213 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:43.213Z,1569265723.213 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:44.029Z,1569265724.029 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:44.816Z,1569265724.816 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:45.225Z,1569265725.225 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:45.225Z,1569265725.225 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:08:45.636Z,1569265725.636 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:46.050Z,1569265726.050 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:08:46.463Z,1569265726.463 [BR_Ping1D](ERROR): Using more than 1 sec to receive one packet, resetting UART
2019-09-23T19:08:46.463Z,1569265726.463 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:46.464Z,1569265726.464 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:46.464Z,1569265726.464 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:46.464Z,1569265726.464 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:46.465Z,1569265726.465 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:46.465Z,1569265726.465 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:46.466Z,1569265726.466 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:46.466Z,1569265726.466 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:46.466Z,1569265726.466 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:47.241Z,1569265727.241 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:48.060Z,1569265728.060 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:48.453Z,1569265728.453 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:49.008Z,1569265729.008 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:49.285Z,1569265729.285 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:49.285Z,1569265729.285 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:49.286Z,1569265729.286 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:49.286Z,1569265729.286 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:50.098Z,1569265730.098 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:50.898Z,1569265730.898 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:51.275Z,1569265731.275 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:51.686Z,1569265731.686 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:52.104Z,1569265732.104 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:52.104Z,1569265732.104 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:52.104Z,1569265732.104 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:52.105Z,1569265732.105 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:52.896Z,1569265732.896 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:53.715Z,1569265733.715 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:54.109Z,1569265734.109 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:54.516Z,1569265734.516 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:54.934Z,1569265734.934 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:54.934Z,1569265734.934 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:54.934Z,1569265734.934 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:54.935Z,1569265734.935 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:55.740Z,1569265735.740 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:56.543Z,1569265736.543 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:56.953Z,1569265736.953 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:08:57.335Z,1569265737.335 [BR_Ping1D](INFO): startup done
2019-09-23T19:08:57.753Z,1569265737.753 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:08:57.753Z,1569265737.753 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:08:57.753Z,1569265737.753 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:08:57.754Z,1569265737.754 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:08:58.564Z,1569265738.564 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:08:59.376Z,1569265739.376 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:08:59.798Z,1569265739.798 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:00.169Z,1569265740.169 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:00.586Z,1569265740.586 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:00.586Z,1569265740.586 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:00.586Z,1569265740.586 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:00.587Z,1569265740.587 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:01.382Z,1569265741.382 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:02.344Z,1569265742.344 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:02.764Z,1569265742.764 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:02.774Z,1569265742.774 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:09:03.018Z,1569265743.018 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:03.434Z,1569265743.434 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:09:03.830Z,1569265743.830 [BR_Ping1D](ERROR): Using more than 1 sec to receive one packet, resetting UART
2019-09-23T19:09:03.830Z,1569265743.830 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:03.831Z,1569265743.831 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:03.831Z,1569265743.831 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:03.831Z,1569265743.831 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:03.832Z,1569265743.832 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:03.833Z,1569265743.833 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:03.833Z,1569265743.833 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:03.833Z,1569265743.833 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:03.834Z,1569265743.834 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:04.620Z,1569265744.620 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:05.420Z,1569265745.420 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:05.839Z,1569265745.839 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:06.249Z,1569265746.249 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:06.633Z,1569265746.633 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:06.633Z,1569265746.633 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:06.634Z,1569265746.634 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:06.634Z,1569265746.634 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:07.451Z,1569265747.451 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:08.257Z,1569265748.257 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:08.667Z,1569265748.667 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:09.065Z,1569265749.065 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:09.483Z,1569265749.483 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:09.483Z,1569265749.483 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:09.483Z,1569265749.483 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:09.484Z,1569265749.484 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:10.286Z,1569265750.286 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:11.115Z,1569265751.115 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:11.483Z,1569265751.483 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:11.896Z,1569265751.896 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:12.315Z,1569265752.315 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:12.315Z,1569265752.315 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:12.315Z,1569265752.315 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:12.316Z,1569265752.316 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:13.106Z,1569265753.106 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:13.903Z,1569265753.903 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:14.324Z,1569265754.324 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:14.732Z,1569265754.732 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:15.364Z,1569265755.364 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:15.364Z,1569265755.364 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:15.364Z,1569265755.364 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:15.373Z,1569265755.373 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:16.118Z,1569265756.118 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:16.770Z,1569265756.770 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:17.170Z,1569265757.170 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:17.562Z,1569265757.562 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:17.954Z,1569265757.954 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:17.954Z,1569265757.954 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:17.954Z,1569265757.954 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:17.955Z,1569265757.955 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:18.752Z,1569265758.752 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:19.573Z,1569265759.573 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:19.980Z,1569265759.980 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:20.368Z,1569265760.368 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:20.778Z,1569265760.778 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:20.778Z,1569265760.778 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:20.778Z,1569265760.778 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:20.779Z,1569265760.779 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:21.598Z,1569265761.598 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:22.445Z,1569265762.445 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:22.805Z,1569265762.805 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:23.226Z,1569265763.226 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:23.618Z,1569265763.618 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:23.618Z,1569265763.618 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:23.618Z,1569265763.618 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:23.619Z,1569265763.619 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:24.431Z,1569265764.431 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:25.224Z,1569265765.224 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:25.637Z,1569265765.637 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:26.060Z,1569265766.060 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:26.462Z,1569265766.462 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:26.463Z,1569265766.463 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:26.463Z,1569265766.463 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:26.464Z,1569265766.464 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:27.247Z,1569265767.247 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:27.769Z,1569265767.769 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:28.052Z,1569265768.052 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:28.479Z,1569265768.479 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:28.883Z,1569265768.883 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:28.883Z,1569265768.883 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:28.883Z,1569265768.883 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:28.884Z,1569265768.884 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:29.686Z,1569265769.686 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:30.473Z,1569265770.473 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:30.885Z,1569265770.885 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:31.292Z,1569265771.292 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:31.681Z,1569265771.681 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:31.681Z,1569265771.681 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:31.681Z,1569265771.681 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:31.682Z,1569265771.682 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:32.499Z,1569265772.499 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:33.296Z,1569265773.296 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:33.701Z,1569265773.701 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:34.104Z,1569265774.104 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:34.513Z,1569265774.513 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:34.513Z,1569265774.513 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:34.513Z,1569265774.513 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:34.514Z,1569265774.514 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:35.343Z,1569265775.343 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:36.143Z,1569265776.143 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:36.535Z,1569265776.535 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:36.959Z,1569265776.959 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:37.337Z,1569265777.337 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:37.337Z,1569265777.337 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:37.337Z,1569265777.337 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:37.338Z,1569265777.338 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:38.169Z,1569265778.169 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:38.968Z,1569265778.968 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:39.370Z,1569265779.370 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:39.913Z,1569265779.913 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:40.172Z,1569265780.172 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:40.172Z,1569265780.172 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:40.172Z,1569265780.172 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:40.201Z,1569265780.201 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:40.986Z,1569265780.986 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:41.791Z,1569265781.791 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:42.203Z,1569265782.203 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:42.622Z,1569265782.622 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:43.002Z,1569265783.002 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:43.003Z,1569265783.003 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:43.003Z,1569265783.003 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:43.003Z,1569265783.003 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:43.800Z,1569265783.800 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:44.620Z,1569265784.620 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:45.013Z,1569265785.013 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:45.433Z,1569265785.433 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:45.833Z,1569265785.833 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:45.833Z,1569265785.833 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:45.833Z,1569265785.833 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:45.834Z,1569265785.834 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:46.641Z,1569265786.641 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:47.144Z,1569265787.144 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:47.443Z,1569265787.443 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:47.858Z,1569265787.858 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:48.274Z,1569265788.274 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:48.275Z,1569265788.275 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:48.275Z,1569265788.275 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:48.276Z,1569265788.276 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:49.069Z,1569265789.069 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:49.861Z,1569265789.861 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:50.263Z,1569265790.263 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:50.679Z,1569265790.679 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:51.096Z,1569265791.096 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:51.096Z,1569265791.096 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:51.096Z,1569265791.096 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:51.097Z,1569265791.097 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:51.884Z,1569265791.884 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:52.406Z,1569265792.406 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:52.717Z,1569265792.717 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:53.111Z,1569265793.111 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:53.523Z,1569265793.523 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:53.523Z,1569265793.523 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:53.523Z,1569265793.523 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:53.524Z,1569265793.524 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:54.314Z,1569265794.314 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:55.122Z,1569265795.122 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:55.543Z,1569265795.543 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:55.931Z,1569265795.931 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:56.356Z,1569265796.356 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:56.356Z,1569265796.356 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:56.356Z,1569265796.356 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:56.357Z,1569265796.357 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:57.145Z,1569265797.145 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:09:57.940Z,1569265797.940 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:09:58.352Z,1569265798.352 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:09:58.751Z,1569265798.751 [BR_Ping1D](INFO): startup done
2019-09-23T19:09:59.254Z,1569265799.254 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:09:59.254Z,1569265799.254 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:09:59.254Z,1569265799.254 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:09:59.255Z,1569265799.255 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:09:59.994Z,1569265799.994 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:00.807Z,1569265800.807 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:01.180Z,1569265801.180 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:01.572Z,1569265801.572 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:02.003Z,1569265802.003 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:02.003Z,1569265802.003 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:02.004Z,1569265802.004 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:02.004Z,1569265802.004 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:02.799Z,1569265802.799 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:03.621Z,1569265803.621 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:04.000Z,1569265804.000 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:04.573Z,1569265804.573 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:04.833Z,1569265804.833 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:04.833Z,1569265804.833 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:04.833Z,1569265804.833 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:04.834Z,1569265804.834 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:05.648Z,1569265805.648 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:06.419Z,1569265806.419 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:06.837Z,1569265806.837 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:07.246Z,1569265807.246 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:07.637Z,1569265807.637 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:07.637Z,1569265807.637 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:07.637Z,1569265807.637 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:07.638Z,1569265807.638 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:08.426Z,1569265808.426 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2019-09-23T19:10:08.460Z,1569265808.460 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:09.249Z,1569265809.249 [NAL9602](DEBUG): Fix Requested
2019-09-23T19:10:09.269Z,1569265809.269 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:09.640Z,1569265809.640 [NAL9602](DEBUG): Parsing RMC sentence: $GPRMC,190914.00,A,3648.16648,N,12147.29050,W,0.428,0.00,230919,,,A*7D
2019-09-23T19:10:09.644Z,1569265809.644 [NAL9602](INFO): GPS fix at 20190923T190914: (36.802775, -121.788175)
2019-09-23T19:10:09.676Z,1569265809.676 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:09.724Z,1569265809.724 [Default:CheckIn:Read_GPS] Stopped
2019-09-23T19:10:09.724Z,1569265809.724 [Default:CheckIn:Read_Iridium] Running Loop=1
2019-09-23T19:10:10.086Z,1569265810.086 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:10.191Z,1569265810.191 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2019-09-23T19:10:11.140Z,1569265811.140 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:11.140Z,1569265811.140 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:11.140Z,1569265811.140 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:11.141Z,1569265811.141 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:11.945Z,1569265811.945 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:12.698Z,1569265812.698 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:13.097Z,1569265813.097 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:13.498Z,1569265813.498 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:13.921Z,1569265813.921 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:13.921Z,1569265813.921 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:13.921Z,1569265813.921 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:13.922Z,1569265813.922 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:14.711Z,1569265814.711 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:15.511Z,1569265815.511 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:15.929Z,1569265815.929 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:16.327Z,1569265816.327 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:17.021Z,1569265817.021 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:17.021Z,1569265817.021 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:17.022Z,1569265817.022 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:17.022Z,1569265817.022 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:17.642Z,1569265817.642 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:18.450Z,1569265818.450 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:18.862Z,1569265818.862 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:19.284Z,1569265819.284 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:19.663Z,1569265819.663 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:19.664Z,1569265819.664 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:19.664Z,1569265819.664 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:19.664Z,1569265819.664 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:20.483Z,1569265820.483 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:21.273Z,1569265821.273 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:21.684Z,1569265821.684 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:22.091Z,1569265822.091 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:22.490Z,1569265822.490 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:22.490Z,1569265822.490 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:22.490Z,1569265822.490 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:22.491Z,1569265822.491 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:23.295Z,1569265823.295 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:23.863Z,1569265823.863 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:24.136Z,1569265824.136 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:24.526Z,1569265824.526 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:24.915Z,1569265824.915 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:24.915Z,1569265824.915 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:24.915Z,1569265824.915 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:24.916Z,1569265824.916 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:25.720Z,1569265825.720 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:25.882Z,1569265825.882 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20190923T190416/Courier0000.lzma
2019-09-23T19:10:26.524Z,1569265826.524 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:26.928Z,1569265826.928 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:27.357Z,1569265827.357 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:27.744Z,1569265827.744 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:27.744Z,1569265827.744 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:27.744Z,1569265827.744 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:27.745Z,1569265827.745 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:27.890Z,1569265827.890 [DataOverHttps](INFO): Moved sent file to Logs/20190923T190416/Courier0000.lzma.bak
2019-09-23T19:10:27.891Z,1569265827.891 [DataOverHttps](INFO): SBD MOMSN=11804414
2019-09-23T19:10:28.544Z,1569265828.544 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:29.112Z,1569265829.112 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:29.472Z,1569265829.472 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:29.798Z,1569265829.798 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:30.184Z,1569265830.184 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:30.184Z,1569265830.184 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:30.185Z,1569265830.185 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:30.186Z,1569265830.186 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:30.978Z,1569265830.978 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:31.811Z,1569265831.811 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:32.206Z,1569265832.206 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:32.601Z,1569265832.601 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:33.042Z,1569265833.042 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:33.043Z,1569265833.043 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:33.043Z,1569265833.043 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:33.043Z,1569265833.043 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:33.806Z,1569265833.806 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:34.623Z,1569265834.623 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:35.036Z,1569265835.036 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:35.427Z,1569265835.427 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:35.994Z,1569265835.994 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:35.994Z,1569265835.994 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:35.994Z,1569265835.994 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:35.995Z,1569265835.995 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:36.674Z,1569265836.674 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:37.462Z,1569265837.462 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:37.873Z,1569265837.873 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:38.297Z,1569265838.297 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:38.718Z,1569265838.718 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:38.718Z,1569265838.718 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:38.718Z,1569265838.718 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:38.719Z,1569265838.719 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:39.481Z,1569265839.481 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:40.307Z,1569265840.307 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:40.687Z,1569265840.687 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:41.397Z,1569265841.397 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:41.734Z,1569265841.734 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:41.735Z,1569265841.735 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:41.735Z,1569265841.735 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:41.735Z,1569265841.735 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:42.049Z,1569265842.049 [NAL9602](INFO): Not Powering down - fast GPS
2019-09-23T19:10:42.402Z,1569265842.402 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:43.173Z,1569265843.173 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:43.577Z,1569265843.577 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:43.975Z,1569265843.975 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:44.375Z,1569265844.375 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:44.376Z,1569265844.376 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:44.376Z,1569265844.376 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:44.376Z,1569265844.376 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:45.188Z,1569265845.188 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:45.995Z,1569265845.995 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:46.407Z,1569265846.407 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:46.799Z,1569265846.799 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:47.209Z,1569265847.209 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:47.209Z,1569265847.209 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:47.209Z,1569265847.209 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:47.210Z,1569265847.210 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:48.175Z,1569265848.175 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:48.838Z,1569265848.838 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:49.242Z,1569265849.242 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:49.635Z,1569265849.635 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:50.043Z,1569265850.043 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:50.043Z,1569265850.043 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:50.043Z,1569265850.043 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:50.044Z,1569265850.044 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:50.848Z,1569265850.848 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:51.651Z,1569265851.651 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:52.056Z,1569265852.056 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:52.475Z,1569265852.475 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:52.862Z,1569265852.862 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:52.862Z,1569265852.862 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:52.862Z,1569265852.862 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:52.863Z,1569265852.863 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:53.692Z,1569265853.692 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:54.510Z,1569265854.510 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:54.890Z,1569265854.890 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:55.298Z,1569265855.298 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:55.693Z,1569265855.693 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:55.693Z,1569265855.693 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:55.693Z,1569265855.693 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:55.694Z,1569265855.694 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:56.503Z,1569265856.503 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:10:57.313Z,1569265857.313 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:10:57.708Z,1569265857.708 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:10:58.133Z,1569265858.133 [BR_Ping1D](INFO): startup done
2019-09-23T19:10:58.515Z,1569265858.515 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:10:58.515Z,1569265858.515 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:10:58.516Z,1569265858.516 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:10:58.516Z,1569265858.516 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:10:59.324Z,1569265859.324 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:00.346Z,1569265860.346 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:00.647Z,1569265860.647 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:00.970Z,1569265860.970 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:01.382Z,1569265861.382 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:01.382Z,1569265861.382 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:01.383Z,1569265861.383 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:01.383Z,1569265861.383 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:02.163Z,1569265862.163 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:02.980Z,1569265862.980 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:03.388Z,1569265863.388 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:03.783Z,1569265863.783 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:04.195Z,1569265864.195 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:04.195Z,1569265864.195 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:04.195Z,1569265864.195 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:04.195Z,1569265864.195 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:05.003Z,1569265865.003 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:05.615Z,1569265865.615 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:05.858Z,1569265865.858 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:06.222Z,1569265866.222 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:06.631Z,1569265866.631 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:06.631Z,1569265866.631 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:06.631Z,1569265866.631 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:06.632Z,1569265866.632 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:07.277Z,1569265867.277 [DataOverHttps](INFO): Sending 213 bytes from file Logs/20190923T190416/Courier0004.lzma
2019-09-23T19:11:07.421Z,1569265867.421 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:08.220Z,1569265868.220 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:08.631Z,1569265868.631 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:09.048Z,1569265869.048 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:09.286Z,1569265869.286 [DataOverHttps](INFO): Moved sent file to Logs/20190923T190416/Courier0004.lzma.bak
2019-09-23T19:11:09.287Z,1569265869.287 [DataOverHttps](INFO): SBD MOMSN=11804418
2019-09-23T19:11:09.432Z,1569265869.432 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:09.433Z,1569265869.433 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:09.433Z,1569265869.433 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:09.434Z,1569265869.434 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:10.251Z,1569265870.251 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:11.055Z,1569265871.055 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:11.462Z,1569265871.462 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:11.871Z,1569265871.871 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:12.422Z,1569265872.422 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:12.422Z,1569265872.422 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:12.422Z,1569265872.422 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:12.423Z,1569265872.423 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:13.111Z,1569265873.111 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:13.887Z,1569265873.887 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:14.279Z,1569265874.279 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:14.692Z,1569265874.692 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:15.098Z,1569265875.098 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:15.098Z,1569265875.098 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:15.098Z,1569265875.098 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:15.099Z,1569265875.099 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:15.904Z,1569265875.904 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:16.711Z,1569265876.711 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:17.121Z,1569265877.121 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:17.651Z,1569265877.651 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:17.931Z,1569265877.931 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:17.931Z,1569265877.931 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:17.931Z,1569265877.931 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:17.932Z,1569265877.932 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:18.746Z,1569265878.746 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:19.536Z,1569265879.536 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:19.939Z,1569265879.939 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:20.351Z,1569265880.351 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:20.757Z,1569265880.757 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:20.757Z,1569265880.757 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:20.758Z,1569265880.758 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:20.758Z,1569265880.758 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:21.560Z,1569265881.560 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:22.368Z,1569265882.368 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:22.775Z,1569265882.775 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:23.172Z,1569265883.172 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:23.585Z,1569265883.585 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:23.586Z,1569265883.586 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:23.587Z,1569265883.587 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:23.588Z,1569265883.588 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:24.395Z,1569265884.395 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:24.977Z,1569265884.977 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:25.250Z,1569265885.250 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:25.618Z,1569265885.618 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:26.019Z,1569265886.019 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:26.019Z,1569265886.019 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:26.019Z,1569265886.019 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:26.020Z,1569265886.020 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:26.818Z,1569265886.818 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:27.623Z,1569265887.623 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:28.063Z,1569265888.063 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:28.432Z,1569265888.432 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:28.828Z,1569265888.828 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:28.849Z,1569265888.849 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:28.849Z,1569265888.849 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:28.850Z,1569265888.850 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:29.839Z,1569265889.839 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:30.478Z,1569265890.478 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:30.862Z,1569265890.862 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:31.258Z,1569265891.258 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:31.668Z,1569265891.668 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:31.668Z,1569265891.668 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:31.668Z,1569265891.668 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:31.669Z,1569265891.669 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:32.472Z,1569265892.472 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:33.285Z,1569265893.285 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:33.695Z,1569265893.695 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:34.099Z,1569265894.099 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:34.482Z,1569265894.482 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:34.482Z,1569265894.482 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:34.482Z,1569265894.482 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:34.483Z,1569265894.483 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:35.310Z,1569265895.310 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:36.126Z,1569265896.126 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:36.510Z,1569265896.510 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:37.025Z,1569265897.025 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:37.317Z,1569265897.317 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:37.317Z,1569265897.317 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:37.317Z,1569265897.317 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:37.318Z,1569265897.318 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:38.142Z,1569265898.142 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:38.934Z,1569265898.934 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:39.335Z,1569265899.335 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:39.728Z,1569265899.728 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:40.151Z,1569265900.151 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:40.151Z,1569265900.151 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:40.151Z,1569265900.151 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:40.152Z,1569265900.152 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:40.951Z,1569265900.951 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:41.748Z,1569265901.748 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:42.162Z,1569265902.162 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:42.703Z,1569265902.703 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:42.991Z,1569265902.991 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:42.991Z,1569265902.991 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:42.992Z,1569265902.992 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:42.992Z,1569265902.992 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:43.790Z,1569265903.790 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:44.576Z,1569265904.576 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:44.995Z,1569265904.995 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:45.401Z,1569265905.401 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:45.790Z,1569265905.790 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:45.790Z,1569265905.790 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:45.790Z,1569265905.790 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:45.790Z,1569265905.790 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:46.600Z,1569265906.600 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:47.406Z,1569265907.406 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:47.855Z,1569265907.855 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:48.220Z,1569265908.220 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:48.627Z,1569265908.627 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:48.627Z,1569265908.627 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:48.627Z,1569265908.627 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:48.628Z,1569265908.628 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:49.431Z,1569265909.431 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:50.462Z,1569265910.462 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:50.750Z,1569265910.750 [BPC1](ERROR): Battery stick #57 (s/n: 01BF) reported OVER_TEMP_ALARM. Status code: 0x1717.
2019-09-23T19:11:50.750Z,1569265910.750 [BPC1](INFO): Calculating totals. Valid battery stick count: 55. Valid reserve battery stick count: 6.
2019-09-23T19:11:50.785Z,1569265910.785 [BPC1](INFO): Received data from all battery sticks.
2019-09-23T19:11:50.786Z,1569265910.786 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:51.078Z,1569265911.078 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:51.485Z,1569265911.485 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:51.486Z,1569265911.486 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:51.486Z,1569265911.486 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:51.486Z,1569265911.486 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:52.283Z,1569265912.283 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:53.090Z,1569265913.090 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:53.499Z,1569265913.499 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:53.910Z,1569265913.910 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:54.300Z,1569265914.300 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:54.300Z,1569265914.300 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:54.300Z,1569265914.300 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:54.301Z,1569265914.301 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:55.107Z,1569265915.107 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:55.911Z,1569265915.911 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:56.318Z,1569265916.318 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:56.730Z,1569265916.730 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:57.132Z,1569265917.132 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:57.133Z,1569265917.133 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:57.133Z,1569265917.133 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:57.133Z,1569265917.133 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:11:57.941Z,1569265917.941 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:11:58.744Z,1569265918.744 [DataOverHttps](INFO): Sending 206 bytes from file Logs/20190923T185200/Express0005.lzma
2019-09-23T19:11:58.758Z,1569265918.758 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:11:59.155Z,1569265919.155 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:11:59.548Z,1569265919.548 [BR_Ping1D](INFO): startup done
2019-09-23T19:11:59.957Z,1569265919.957 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:11:59.957Z,1569265919.957 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:11:59.957Z,1569265919.957 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:11:59.958Z,1569265919.958 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:00.746Z,1569265920.746 [DataOverHttps](INFO): Moved sent file to Logs/20190923T185200/Express0005.lzma.bak
2019-09-23T19:12:00.746Z,1569265920.746 [DataOverHttps](INFO): SBD MOMSN=11804421
2019-09-23T19:12:00.783Z,1569265920.783 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:01.567Z,1569265921.567 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:01.970Z,1569265921.970 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:02.375Z,1569265922.375 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:02.789Z,1569265922.789 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:02.790Z,1569265922.790 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:02.790Z,1569265922.790 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:02.790Z,1569265922.790 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:03.590Z,1569265923.590 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:04.413Z,1569265924.413 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:04.803Z,1569265924.803 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:05.214Z,1569265925.214 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:05.608Z,1569265925.608 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:05.608Z,1569265925.608 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:05.609Z,1569265925.609 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:05.609Z,1569265925.609 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:06.419Z,1569265926.419 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:07.252Z,1569265927.252 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:07.627Z,1569265927.627 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:08.038Z,1569265928.038 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:08.451Z,1569265928.451 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:08.451Z,1569265928.451 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:08.451Z,1569265928.451 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:08.452Z,1569265928.452 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:09.248Z,1569265929.248 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:10.055Z,1569265930.055 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:10.475Z,1569265930.475 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:10.874Z,1569265930.874 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:11.284Z,1569265931.284 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:11.284Z,1569265931.284 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:11.284Z,1569265931.284 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:11.285Z,1569265931.285 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:12.080Z,1569265932.080 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:12.899Z,1569265932.899 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:13.287Z,1569265933.287 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:13.288Z,1569265933.288 [BR_Ping1D](INFO): CRC error in received UART packet
2019-09-23T19:12:13.704Z,1569265933.704 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:14.110Z,1569265934.110 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:14.110Z,1569265934.110 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:14.110Z,1569265934.110 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:14.111Z,1569265934.111 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:14.912Z,1569265934.912 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:15.714Z,1569265935.714 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:16.127Z,1569265936.127 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:16.519Z,1569265936.519 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:16.928Z,1569265936.928 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:16.928Z,1569265936.928 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:16.928Z,1569265936.928 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:16.929Z,1569265936.929 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:17.737Z,1569265937.737 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:18.559Z,1569265938.559 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:18.947Z,1569265938.947 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:19.364Z,1569265939.364 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:19.767Z,1569265939.767 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:19.767Z,1569265939.767 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:19.767Z,1569265939.767 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:19.768Z,1569265939.768 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:20.581Z,1569265940.581 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:21.383Z,1569265941.383 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:21.787Z,1569265941.787 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:22.177Z,1569265942.177 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:22.588Z,1569265942.588 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:22.588Z,1569265942.588 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:22.589Z,1569265942.589 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:22.589Z,1569265942.589 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:23.426Z,1569265943.426 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:24.210Z,1569265944.210 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:24.603Z,1569265944.603 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:25.006Z,1569265945.006 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:25.411Z,1569265945.411 [BR_Ping1D](INFO): Not enough UART bytes for payload try again on next cycle
2019-09-23T19:12:25.815Z,1569265945.815 [BR_Ping1D](INFO): CRC error in received UART packet
2019-09-23T19:12:26.226Z,1569265946.226 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:26.226Z,1569265946.226 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:26.226Z,1569265946.226 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:26.227Z,1569265946.227 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:27.027Z,1569265947.027 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:27.839Z,1569265947.839 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:28.288Z,1569265948.288 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:28.654Z,1569265948.654 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:29.071Z,1569265949.071 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:29.071Z,1569265949.071 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:29.071Z,1569265949.071 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:29.072Z,1569265949.072 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:29.856Z,1569265949.856 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:30.674Z,1569265950.674 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:31.068Z,1569265951.068 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:31.471Z,1569265951.471 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:31.884Z,1569265951.884 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:31.884Z,1569265951.884 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:31.884Z,1569265951.884 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:31.890Z,1569265951.890 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:32.687Z,1569265952.687 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:33.490Z,1569265953.490 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:33.900Z,1569265953.900 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:34.310Z,1569265954.310 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:34.712Z,1569265954.712 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:34.712Z,1569265954.712 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:34.712Z,1569265954.712 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:34.713Z,1569265954.713 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:35.511Z,1569265955.511 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:36.330Z,1569265956.330 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:36.731Z,1569265956.731 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:37.138Z,1569265957.138 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:37.551Z,1569265957.551 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:37.551Z,1569265957.551 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:37.551Z,1569265957.551 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:37.552Z,1569265957.552 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:38.359Z,1569265958.359 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:39.146Z,1569265959.146 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:39.562Z,1569265959.562 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:39.959Z,1569265959.959 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:40.371Z,1569265960.371 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:40.371Z,1569265960.371 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:40.371Z,1569265960.371 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:40.372Z,1569265960.372 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:41.177Z,1569265961.177 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:41.976Z,1569265961.976 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:42.176Z,1569265962.176 [DataOverHttps](INFO): Sending 853 bytes from file Logs/20190923T185935/Express0001.lzma
2019-09-23T19:12:42.380Z,1569265962.380 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:42.795Z,1569265962.795 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:43.189Z,1569265963.189 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:43.189Z,1569265963.189 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:43.190Z,1569265963.190 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:43.190Z,1569265963.190 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:44.005Z,1569265964.005 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:44.054Z,1569265964.054 [DataOverHttps](INFO): Moved sent file to Logs/20190923T185935/Express0001.lzma.bak
2019-09-23T19:12:44.054Z,1569265964.054 [DataOverHttps](INFO): SBD MOMSN=11804426
2019-09-23T19:12:44.807Z,1569265964.807 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:45.219Z,1569265965.219 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:45.611Z,1569265965.611 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:46.024Z,1569265966.024 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:46.024Z,1569265966.024 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:46.024Z,1569265966.024 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:46.025Z,1569265966.025 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:46.823Z,1569265966.823 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:47.642Z,1569265967.642 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:48.035Z,1569265968.035 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:48.456Z,1569265968.456 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:48.855Z,1569265968.855 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:48.855Z,1569265968.855 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:48.855Z,1569265968.855 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:48.856Z,1569265968.856 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:49.650Z,1569265969.650 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:50.466Z,1569265970.466 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:50.863Z,1569265970.863 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:51.277Z,1569265971.277 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:51.672Z,1569265971.672 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:51.672Z,1569265971.672 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:51.672Z,1569265971.672 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:51.673Z,1569265971.673 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:52.496Z,1569265972.496 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:53.307Z,1569265973.307 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:53.700Z,1569265973.700 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:54.107Z,1569265974.107 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:54.500Z,1569265974.500 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:54.500Z,1569265974.500 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:54.521Z,1569265974.521 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:54.522Z,1569265974.522 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:55.306Z,1569265975.306 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:55.808Z,1569265975.808 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:56.176Z,1569265976.176 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:56.554Z,1569265976.554 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:56.969Z,1569265976.969 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:56.970Z,1569265976.970 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:56.970Z,1569265976.970 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:56.970Z,1569265976.970 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:12:57.747Z,1569265977.747 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:12:58.555Z,1569265978.555 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:12:58.970Z,1569265978.970 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:12:59.373Z,1569265979.373 [BR_Ping1D](INFO): startup done
2019-09-23T19:12:59.774Z,1569265979.774 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:12:59.774Z,1569265979.774 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:12:59.774Z,1569265979.774 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:12:59.775Z,1569265979.775 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:13:00.586Z,1569265980.586 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:13:01.392Z,1569265981.392 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:13:01.812Z,1569265981.812 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:13:02.191Z,1569265982.191 [BR_Ping1D](INFO): startup done
2019-09-23T19:13:02.597Z,1569265982.597 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:13:02.598Z,1569265982.598 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:13:02.598Z,1569265982.598 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:13:02.598Z,1569265982.598 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:13:03.403Z,1569265983.403 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:13:04.224Z,1569265984.224 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:13:04.615Z,1569265984.615 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:13:05.051Z,1569265985.051 [BR_Ping1D](INFO): startup done
2019-09-23T19:13:05.425Z,1569265985.425 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:13:05.425Z,1569265985.425 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:13:05.425Z,1569265985.425 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:13:05.426Z,1569265985.426 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:13:06.254Z,1569265986.254 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:13:07.050Z,1569265987.050 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:13:07.450Z,1569265987.450 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:13:07.850Z,1569265987.850 [BR_Ping1D](INFO): startup done
2019-09-23T19:13:08.251Z,1569265988.251 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:13:08.251Z,1569265988.251 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:13:08.251Z,1569265988.251 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:13:08.252Z,1569265988.252 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:13:09.059Z,1569265989.059 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:13:09.885Z,1569265989.885 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:13:10.281Z,1569265990.281 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:13:10.486Z,1569265990.486 [CommandLine](IMPORTANT): got command restart application
2019-09-23T19:13:10.686Z,1569265990.686 [BR_Ping1D](INFO): startup done
2019-09-23T19:13:11.082Z,1569265991.082 [BR_Ping1D](INFO): distance: 557
2019-09-23T19:13:11.082Z,1569265991.082 [BR_Ping1D](INFO): confidence: 100
2019-09-23T19:13:11.082Z,1569265991.082 [BR_Ping1D](INFO): gainindex: 2
2019-09-23T19:13:11.083Z,1569265991.083 [BR_Ping1D](INFO): new distance measurement: 557, confidence: 100
2019-09-23T19:13:11.492Z,1569265991.492 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2019-09-23T19:13:11.492Z,1569265991.492 [CommandLine ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:11.557Z,1569265991.557 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2019-09-23T19:13:11.557Z,1569265991.557 [CommandLine ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:11.558Z,1569265991.558 [CommandLine](INFO): Join timeout helper Thread ID is 6832
2019-09-23T19:13:11.581Z,1569265991.581 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2019-09-23T19:13:11.581Z,1569265991.581 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:11.581Z,1569265991.581 [NavChartDb](INFO): Join timeout helper Thread ID is 6833
2019-09-23T19:13:11.769Z,1569265991.769 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2019-09-23T19:13:11.769Z,1569265991.769 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:11.777Z,1569265991.777 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2019-09-23T19:13:11.777Z,1569265991.777 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:11.777Z,1569265991.777 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 6834
2019-09-23T19:13:11.887Z,1569265991.887 [BR_Ping1D](INFO): UART setting parameters ...
2019-09-23T19:13:11.897Z,1569265991.897 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2019-09-23T19:13:11.897Z,1569265991.897 [WetLabsBB2FL](INFO): Powering down
2019-09-23T19:13:11.898Z,1569265991.898 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:11.899Z,1569265991.899 [ComponentRegistry](INFO): Shutting down CTD_Seabird ThreadHandler
2019-09-23T19:13:11.899Z,1569265991.899 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:11.899Z,1569265991.899 [CTD_Seabird](INFO): Join timeout helper Thread ID is 6835
2019-09-23T19:13:12.693Z,1569265992.693 [CTD_Seabird](INFO): Powering down
2019-09-23T19:13:12.699Z,1569265992.699 [BR_Ping1D](INFO): UART requesting status
2019-09-23T19:13:12.705Z,1569265992.705 [CTD_Seabird ThreadHandler](INFO): Uninitializing protected caller thread.
2019-09-23T19:13:12.705Z,1569265992.705 [CTD_Seabird](INFO): Powering down
2019-09-23T19:13:12.717Z,1569265992.717 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:12.729Z,1569265992.729 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2019-09-23T19:13:12.729Z,1569265992.729 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:12.732Z,1569265992.732 [Radio_Surface](INFO): Join timeout helper Thread ID is 6836
2019-09-23T19:13:12.829Z,1569265992.829 [Radio_Surface](INFO): Powering down
2019-09-23T19:13:12.830Z,1569265992.830 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2019-09-23T19:13:12.830Z,1569265992.830 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:12.850Z,1569265992.850 [ComponentRegistry](INFO): Shutting down DataOverHttps ThreadHandler
2019-09-23T19:13:12.850Z,1569265992.850 [DataOverHttps ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:12.850Z,1569265992.850 [DataOverHttps](INFO): Join timeout helper Thread ID is 6837
2019-09-23T19:13:13.100Z,1569265993.100 [BR_Ping1D](INFO): Reset of UART receiver requested
2019-09-23T19:13:13.531Z,1569265993.531 [BR_Ping1D](INFO): startup done
2019-09-23T19:13:13.769Z,1569265993.769 [DataOverHttps ThreadHandler](INFO): Uninitializing protected caller thread.
2019-09-23T19:13:13.769Z,1569265993.769 [DataOverHttps ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:13.778Z,1569265993.778 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2019-09-23T19:13:13.778Z,1569265993.778 [logger ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:13.798Z,1569265993.798 [logger](INFO): Join timeout helper Thread ID is 6838
2019-09-23T19:13:13.801Z,1569265993.801 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2019-09-23T19:13:13.801Z,1569265993.801 [logger ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:13.803Z,1569265993.803 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2019-09-23T19:13:13.803Z,1569265993.803 [CommandLine ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:13.803Z,1569265993.803 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2019-09-23T19:13:13.803Z,1569265993.803 [controlThread ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:13.803Z,1569265993.803 [controlThread](INFO): Join timeout helper Thread ID is 6839
2019-09-23T19:13:13.873Z,1569265993.873 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2019-09-23T19:13:13.873Z,1569265993.873 [controlThread](DEBUG): Uninitializing ControlThread
2019-09-23T19:13:13.874Z,1569265993.874 [AHRS_M2](INFO): Powering down
2019-09-23T19:13:13.945Z,1569265993.945 [DVL_micro](INFO): uninitialize:Powering down
2019-09-23T19:13:13.946Z,1569265993.946 [NAL9602](INFO): Powering down
2019-09-23T19:13:13.948Z,1569265993.948 [DAT](INFO): Powering down
2019-09-23T19:13:14.065Z,1569265994.065 [BR_Ping1D](INFO): Powering down
2019-09-23T19:13:14.138Z,1569265994.138 [DepthRateCalculator](DEBUG): Uninitializing DepthRateCalculator.
2019-09-23T19:13:14.138Z,1569265994.138 [ElevatorOffsetCalculator](DEBUG): Uninitializing ElevatorOffsetCalculator.
2019-09-23T19:13:14.139Z,1569265994.139 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2019-09-23T19:13:14.139Z,1569265994.139 [MissionManager](INFO): Uninitializing Mission Default
2019-09-23T19:13:14.140Z,1569265994.140 [Default] Stopped
2019-09-23T19:13:14.140Z,1569265994.140 [Default](DEBUG): Aggregate::uninitialize Default
2019-09-23T19:13:14.140Z,1569265994.140 [Default:B.GoToSurface] Stopped
2019-09-23T19:13:14.140Z,1569265994.140 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2019-09-23T19:13:14.140Z,1569265994.140 [Default:CheckIn] Stopped
2019-09-23T19:13:14.140Z,1569265994.140 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2019-09-23T19:13:14.140Z,1569265994.140 [Default:CheckIn:Read_Iridium] Stopped
2019-09-23T19:13:14.143Z,1569265994.143 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2019-09-23T19:13:14.143Z,1569265994.143 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2019-09-23T19:13:14.143Z,1569265994.143 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2019-09-23T19:13:14.143Z,1569265994.143 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2019-09-23T19:13:14.144Z,1569265994.144 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2019-09-23T19:13:14.144Z,1569265994.144 [BuoyancyServo](INFO): Powering down
2019-09-23T19:13:14.157Z,1569265994.157 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2019-09-23T19:13:14.157Z,1569265994.157 [ElevatorServo](INFO): Powering down
2019-09-23T19:13:14.158Z,1569265994.158 [MassServo](DEBUG): Uninitialize Mass Servo.
2019-09-23T19:13:14.158Z,1569265994.158 [MassServo](INFO): Powering down
2019-09-23T19:13:14.159Z,1569265994.159 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2019-09-23T19:13:14.159Z,1569265994.159 [RudderServo](INFO): Powering down
2019-09-23T19:13:14.160Z,1569265994.160 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2019-09-23T19:13:14.160Z,1569265994.160 [ThrusterServo](INFO): Powering down
2019-09-23T19:13:14.160Z,1569265994.160 [SBIT](DEBUG): Uninitialize SBIT Component.
2019-09-23T19:13:14.161Z,1569265994.161 [IBIT](DEBUG): Uninitialize IBIT Component.
2019-09-23T19:13:14.161Z,1569265994.161 [CBIT](DEBUG): Uninitialize CBIT Component.
2019-09-23T19:13:14.161Z,1569265994.161 [CBIT](DEBUG): Powering off loads.
2019-09-23T19:13:14.173Z,1569265994.173 [CBIT](DEBUG): Disabling WDT.
2019-09-23T19:13:14.185Z,1569265994.185 [CBIT](DEBUG): Opening all GF detection circuits.
2019-09-23T19:13:14.185Z,1569265994.185 [controlThread ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:14.274Z,1569265994.274 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:14.284Z,1569265994.284 [DataOverHttps ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:14.326Z,1569265994.326 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:14.329Z,1569265994.329 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:14.364Z,1569265994.364 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2019-09-23T19:13:14.430Z,1569265994.430 [logger ThreadHandler](INFO): Thread cancelled.