2018-09-12T18:28:54.780Z,1536776934.780 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg 2018-09-12T18:28:59.814Z,1536776939.814 [SBIT](IMPORTANT): git: 2018-09-06 2018-09-12T18:28:59.815Z,1536776939.815 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2018-09-12T18:29:01.223Z,1536776941.223 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-12T18:29:02.583Z,1536776942.583 [BuoyancyServo](FAULT): Buoyancy failed to initialize 2018-09-12T18:29:06.163Z,1536776946.163 [BuoyancyServo](FAULT): Buoyancy failed to initialize 2018-09-12T18:29:28.375Z,1536776968.375 [SBIT](IMPORTANT): Beginning Startup BIT 2018-09-12T18:29:28.399Z,1536776968.399 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-12T18:29:39.346Z,1536776979.346 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.018490 CHAN A1 (24V): -0.027000 CHAN A2 (12V): -0.004336 CHAN A3 (5V): -0.002872 CHAN B0 (3.3V): -0.001017 CHAN B1 (3.15aV): -0.001517 CHAN B2 (3.15bV): -0.001267 CHAN B3 (GND): -0.000784 OPEN: 0.004185 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-12T18:30:22.404Z,1536777022.404 [SBIT](IMPORTANT): SBIT PASSED 2018-09-12T18:30:22.459Z,1536777022.459 [CommandLine](IMPORTANT): got command configSet list 2018-09-12T18:30:22.460Z,1536777022.460 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2018-09-12T18:30:22.460Z,1536777022.460 [CommandLine](IMPORTANT): CBIT.gf24Offset=180 microampere; 2018-09-12T18:30:22.461Z,1536777022.461 [CommandLine](IMPORTANT): DataOverHttps.connectionTimeout=60 second; 2018-09-12T18:30:22.461Z,1536777022.461 [CommandLine](IMPORTANT): DataOverHttps.period=30 second; 2018-09-12T18:30:22.461Z,1536777022.461 [CommandLine](IMPORTANT): DataOverHttps.timeout=1 minute; 2018-09-12T18:30:22.461Z,1536777022.461 [CommandLine](IMPORTANT): Express none ESPComponent.sample_number; 2018-09-12T18:30:22.461Z,1536777022.461 [CommandLine](IMPORTANT): Express none ESPComponent.sampling; 2018-09-12T18:30:22.461Z,1536777022.461 [CommandLine](IMPORTANT): Express linearApproximation depth 5.000000 meter; 2018-09-12T18:30:22.461Z,1536777022.461 [CommandLine](IMPORTANT): Express linearApproximation latitude 0.005000 angular_degree; 2018-09-12T18:30:22.462Z,1536777022.462 [CommandLine](IMPORTANT): Express linearApproximation longitude 0.005000 angular_degree; 2018-09-12T18:30:22.462Z,1536777022.462 [CommandLine](IMPORTANT): RDI_Pathfinder.loadAtStartup=0 bool; 2018-09-12T18:30:22.802Z,1536777022.802 [MissionManager](IMPORTANT): Started mission Startup 2018-09-12T18:30:48.390Z,1536777048.390 [DAT](FAULT): unknown deviceResponse_: stats CRC:Fail SNR:04.3 CCERR:003 2018-09-12T18:30:52.071Z,1536777052.071 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-12T18:32:23.707Z,1536777143.707 [MissionManager](IMPORTANT): Started mission Default 2018-09-12T18:39:22.553Z,1536777562.553 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 6.974044 min 2018-09-12T18:40:14.913Z,1536777614.913 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=49406, MT Status=1, MTMSN=1541 2018-09-12T18:40:15.817Z,1536777615.817 [CommandLine](IMPORTANT): got command load ./Missions/Science/isotherm_depth_sampling_modified.xml 2018-09-12T18:40:29.357Z,1536777629.357 [CommandLine](IMPORTANT): Loaded ./Missions/Science/isotherm_depth_sampling_modified.xml 2018-09-12T18:40:40.284Z,1536777640.284 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsothermOrDepth.MissionTimeout 35.000000 hour 2018-09-12T18:40:40.285Z,1536777640.285 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsothermOrDepth.MaxDepth 80.000000 meter 2018-09-12T18:40:40.285Z,1536777640.285 [CommandLine](IMPORTANT): got command run 2018-09-12T18:40:40.314Z,1536777640.314 [CommandLine](IMPORTANT): Running 2018-09-12T18:40:40.360Z,1536777640.360 [MissionManager](IMPORTANT): Started mission DriftOrDonutAtIsothermOrDepth 2018-09-12T18:40:40.536Z,1536777640.536 [DriftOrDonutAtIsothermOrDepth:AbortDrift:B.AbortDrift](IMPORTANT): Acoustic timeout set to: 2.00 hours. 2018-09-13T23:14:24.517Z,1536880464.517 [ESPComponent](CRITICAL): [sample #14] ESP sampling sequence terminated with error: In state S_LOADING_CARTRIDGE got exception while awaiting result for cmd='Cmd.loadCartridge' exception=<>. Elapsed time since command issued: 2.4027 2018-09-12T18:45:34.554Z,1536777934.554 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 1.000000 count . Target temp = 12.000000 degC . 2018-09-12T18:45:35.761Z,1536777935.761 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-12T19:02:42.535Z,1536778962.535 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-12T19:02:44.295Z,1536778964.295 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-12T19:02:55.756Z,1536778975.756 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-12T19:02:57.465Z,1536778977.465 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-12T19:03:09.408Z,1536778989.408 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-12T19:03:11.204Z,1536778991.204 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-12T19:45:38.309Z,1536781538.309 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 21.671949 m , 12.027887 degC , 0.765900 ug/l . 2018-09-12T19:45:39.440Z,1536781539.440 [ESPComponent](IMPORTANT): Setting regex for ESP Log summary: 'Selecting Cartridge|Sampled|Error|Fail|Retry|Cmd::|Sampler::' 2018-09-12T19:45:39.847Z,1536781539.847 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-12T19:45:39.848Z,1536781539.848 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-12T19:45:39.920Z,1536781539.920 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-12T19:45:40.221Z,1536781540.221 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-12T19:46:10.432Z,1536781570.432 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-12T19:46:11.245Z,1536781571.245 [ESPComponent](IMPORTANT): [sample #1] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-12T19:46:11.736Z,1536781571.736 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-12T19:46:12.426Z,1536781572.426 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-12T19:46:12.826Z,1536781572.826 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-12T19:46:14.426Z,1536781574.426 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-12T19:46:47.225Z,1536781607.225 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_FILTERING 2018-09-12T19:46:49.626Z,1536781609.626 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-12T20:37:10.426Z,1536784630.426 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PROCESSING 2018-09-12T20:37:13.626Z,1536784633.626 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-12T20:48:36.028Z,1536785316.028 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_STOPPING 2018-09-12T20:49:01.228Z,1536785341.228 [ESPComponent](IMPORTANT): [sample #1] ESP sampling sequence completed normally. 2018-09-12T20:49:01.628Z,1536785341.628 [ESPComponent](IMPORTANT): [sample #1] ESP log summary report (2 messages): @12:45:40.65 Selecting Cartridge 14 @13:36:22.64 Sampled 1000.0ml 2018-09-12T20:49:02.522Z,1536785342.522 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 1.000000 count completed. 2018-09-12T20:49:08.496Z,1536785348.496 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 2.000000 count . Target temp = 12.000000 degC . 2018-09-12T20:49:09.707Z,1536785349.707 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-12T21:49:12.130Z,1536788952.130 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 56.665440 m , 11.854608 degC , 0.432900 ug/l . 2018-09-12T21:49:13.697Z,1536788953.697 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-12T21:49:13.698Z,1536788953.698 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-12T21:49:13.720Z,1536788953.720 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-12T21:49:13.887Z,1536788953.887 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-12T21:49:44.483Z,1536788984.483 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-12T21:49:45.293Z,1536788985.293 [ESPComponent](IMPORTANT): [sample #2] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-12T21:49:45.782Z,1536788985.782 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-12T21:49:46.084Z,1536788986.084 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-12T21:49:46.484Z,1536788986.484 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-12T21:49:48.484Z,1536788988.484 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-12T21:50:21.284Z,1536789021.284 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_FILTERING 2018-09-12T21:50:23.684Z,1536789023.684 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-12T22:52:26.484Z,1536792746.484 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PROCESSING 2018-09-12T22:52:28.884Z,1536792748.884 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-12T23:03:52.484Z,1536793432.484 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_STOPPING 2018-09-12T23:04:17.685Z,1536793457.685 [ESPComponent](IMPORTANT): [sample #2] ESP sampling sequence completed normally. 2018-09-12T23:04:18.084Z,1536793458.084 [ESPComponent](IMPORTANT): [sample #2] ESP log summary report (2 messages): @14:49:14.75 Selecting Cartridge 13 @15:51:38.66 Sampled 1000.0ml 2018-09-12T23:04:19.007Z,1536793459.007 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 2.000000 count completed. 2018-09-12T23:04:24.977Z,1536793464.977 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 3.000000 count . Target temp = 12.000000 degC . 2018-09-12T23:04:26.172Z,1536793466.172 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-13T00:04:28.579Z,1536797068.579 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 29.505848 m , 11.837610 degC , 0.666000 ug/l . 2018-09-13T00:04:30.158Z,1536797070.158 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-13T00:04:30.159Z,1536797070.159 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-13T00:04:30.220Z,1536797070.220 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-13T00:04:30.367Z,1536797070.367 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-13T00:05:00.560Z,1536797100.560 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-13T00:05:01.364Z,1536797101.364 [ESPComponent](IMPORTANT): [sample #3] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-13T00:05:01.864Z,1536797101.864 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-13T00:05:02.160Z,1536797102.160 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-13T00:05:02.560Z,1536797102.560 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-13T00:05:04.560Z,1536797104.560 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-13T00:05:37.362Z,1536797137.362 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_FILTERING 2018-09-13T00:05:39.761Z,1536797139.761 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-13T00:29:39.488Z,1536798579.488 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-13T00:29:50.325Z,1536798590.325 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.115546 CHAN A1 (24V): -0.025673 CHAN A2 (12V): -0.004117 CHAN A3 (5V): -0.002617 CHAN B0 (3.3V): -0.001320 CHAN B1 (3.15aV): -0.000881 CHAN B2 (3.15bV): -0.001312 CHAN B3 (GND): -0.000395 OPEN: 0.004173 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-13T00:57:14.560Z,1536800234.560 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_PROCESSING 2018-09-13T00:57:16.963Z,1536800236.963 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-13T01:08:40.160Z,1536800920.160 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_STOPPING 2018-09-13T01:09:05.360Z,1536800945.360 [ESPComponent](IMPORTANT): [sample #3] ESP sampling sequence completed normally. 2018-09-13T01:09:05.761Z,1536800945.761 [ESPComponent](IMPORTANT): [sample #3] ESP log summary report (2 messages): @17:04:30.83 Selecting Cartridge 12 @17:56:26.62 Sampled 1000.0ml 2018-09-13T01:09:06.662Z,1536800946.662 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 3.000000 count completed. 2018-09-13T01:09:12.627Z,1536800952.627 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 4.000000 count . Target temp = 12.000000 degC . 2018-09-13T01:09:13.852Z,1536800953.852 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-13T02:09:16.673Z,1536804556.673 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 27.891972 m , 12.313287 degC , 1.221000 ug/l . 2018-09-13T02:09:18.240Z,1536804558.240 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-13T02:09:18.241Z,1536804558.241 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-13T02:09:18.294Z,1536804558.294 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-13T02:09:18.424Z,1536804558.424 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-13T02:09:49.019Z,1536804589.019 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-13T02:09:49.825Z,1536804589.825 [ESPComponent](IMPORTANT): [sample #4] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-13T02:09:50.334Z,1536804590.334 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-13T02:09:50.621Z,1536804590.621 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-13T02:09:51.020Z,1536804591.020 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-13T02:09:53.020Z,1536804593.020 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-13T02:10:25.820Z,1536804625.820 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_FILTERING 2018-09-13T02:10:28.222Z,1536804628.222 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-13T02:41:33.859Z,1536806493.859 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 7 sticks. 2018-09-13T03:04:05.820Z,1536807845.820 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_PROCESSING 2018-09-13T03:04:08.222Z,1536807848.222 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-13T03:15:37.020Z,1536808537.020 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_STOPPING 2018-09-13T03:16:02.621Z,1536808562.621 [ESPComponent](IMPORTANT): [sample #4] ESP sampling sequence completed normally. 2018-09-13T03:16:03.024Z,1536808563.024 [ESPComponent](IMPORTANT): [sample #4] ESP log summary report (7 messages): @19:09:19.09 Selecting Cartridge 11 @20:03:17.92 Sampled 1000.0ml @20:03:40.56 Slide::Error in PROCESSING -- Archive Syringe positionErr at 2ul (actually 23ul) @20:03:40.57 Retry #1 of 2 @20:03:43.26 Slide::Error in PROCESSING -- Archive Syringe positionErr at 2ul (actually 22ul) @20:03:43.27 Retry #2 of 2 @20:03:45.97 Slide::Error in PROCESSING -- IGNORED Archive Syringe positionErr at 1ul (actually 23ul) 2018-09-13T03:16:03.893Z,1536808563.893 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 4.000000 count completed. 2018-09-13T03:16:09.906Z,1536808569.906 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 5.000000 count . Target temp = 12.000000 degC . 2018-09-13T03:16:11.115Z,1536808571.115 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-13T04:16:13.910Z,1536812173.910 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 30.574467 m , 11.953912 degC , 0.754800 ug/l . 2018-09-13T04:16:15.498Z,1536812175.498 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-13T04:16:15.499Z,1536812175.499 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-13T04:16:15.592Z,1536812175.592 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-13T04:16:15.649Z,1536812175.649 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-13T04:16:46.688Z,1536812206.688 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-13T04:16:47.494Z,1536812207.494 [ESPComponent](IMPORTANT): [sample #5] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-13T04:16:47.988Z,1536812207.988 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-13T04:16:48.288Z,1536812208.288 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-13T04:16:48.688Z,1536812208.688 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-13T04:16:50.690Z,1536812210.690 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-13T04:17:23.492Z,1536812243.492 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_FILTERING 2018-09-13T04:17:25.889Z,1536812245.889 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-13T05:08:44.688Z,1536815324.688 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_PROCESSING 2018-09-13T05:08:47.088Z,1536815327.088 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-13T05:20:10.289Z,1536816010.289 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_STOPPING 2018-09-13T05:20:35.489Z,1536816035.489 [ESPComponent](IMPORTANT): [sample #5] ESP sampling sequence completed normally. 2018-09-13T05:20:35.889Z,1536816035.889 [ESPComponent](IMPORTANT): [sample #5] ESP log summary report (2 messages): @21:16:16.85 Selecting Cartridge 10 @22:07:56.91 Sampled 1000.0ml 2018-09-13T05:20:36.786Z,1536816036.786 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 5.000000 count completed. 2018-09-13T05:20:42.773Z,1536816042.773 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 6.000000 count . Target temp = 12.000000 degC . 2018-09-13T05:20:43.990Z,1536816043.990 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-13T06:20:46.788Z,1536819646.788 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 31.560574 m , 12.028009 degC , 0.599400 ug/l . 2018-09-13T06:20:48.362Z,1536819648.362 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-13T06:20:48.364Z,1536819648.364 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-13T06:20:48.460Z,1536819648.460 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-13T06:20:48.545Z,1536819648.545 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-13T06:21:19.556Z,1536819679.556 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-13T06:21:20.359Z,1536819680.359 [ESPComponent](IMPORTANT): [sample #6] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-13T06:21:20.884Z,1536819680.884 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-13T06:21:21.156Z,1536819681.156 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-13T06:21:21.556Z,1536819681.556 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-13T06:21:23.556Z,1536819683.556 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-13T06:21:56.356Z,1536819716.356 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_FILTERING 2018-09-13T06:21:58.757Z,1536819718.757 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-13T06:23:29.614Z,1536819809.614 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks. 2018-09-13T06:29:50.484Z,1536820190.484 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-13T06:30:01.390Z,1536820201.390 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.005555 CHAN A1 (24V): -0.026255 CHAN A2 (12V): -0.004423 CHAN A3 (5V): -0.002896 CHAN B0 (3.3V): -0.000886 CHAN B1 (3.15aV): -0.001621 CHAN B2 (3.15bV): -0.001173 CHAN B3 (GND): -0.000436 OPEN: 0.004841 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-13T06:44:31.988Z,1536821071.988 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks. 2018-09-13T07:21:49.158Z,1536823309.158 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_PROCESSING 2018-09-13T07:21:51.556Z,1536823311.556 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-13T07:33:15.156Z,1536823995.156 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_STOPPING 2018-09-13T07:33:40.356Z,1536824020.356 [ESPComponent](IMPORTANT): [sample #6] ESP sampling sequence completed normally. 2018-09-13T07:33:40.762Z,1536824020.762 [ESPComponent](IMPORTANT): [sample #6] ESP log summary report (2 messages): @23:20:49.82 Selecting Cartridge 9 @00:21:01.35 Sampled 1000.0ml 2018-09-13T07:33:41.659Z,1536824021.659 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 6.000000 count completed. 2018-09-13T07:33:47.657Z,1536824027.657 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 7.000000 count . Target temp = 12.000000 degC . 2018-09-13T07:33:48.858Z,1536824028.858 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-13T08:33:51.654Z,1536827631.654 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 32.321026 m , 11.977411 degC , 0.754800 ug/l . 2018-09-13T08:33:53.231Z,1536827633.231 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-13T08:33:53.232Z,1536827633.232 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-13T08:33:53.251Z,1536827633.251 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-13T08:33:53.431Z,1536827633.431 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-13T08:34:24.015Z,1536827664.015 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-13T08:34:24.829Z,1536827664.829 [ESPComponent](IMPORTANT): [sample #7] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-13T08:34:25.353Z,1536827665.353 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-13T08:34:25.616Z,1536827665.616 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-13T08:34:26.016Z,1536827666.016 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-13T08:34:28.016Z,1536827668.016 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-13T08:35:00.816Z,1536827700.816 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_FILTERING 2018-09-13T08:35:03.216Z,1536827703.216 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-13T09:25:47.640Z,1536830747.640 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_PROCESSING 2018-09-13T09:25:50.040Z,1536830750.040 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-13T09:37:23.642Z,1536831443.642 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_STOPPING 2018-09-13T09:37:48.841Z,1536831468.841 [ESPComponent](IMPORTANT): [sample #7] ESP sampling sequence completed normally. 2018-09-13T09:37:49.242Z,1536831469.242 [ESPComponent](IMPORTANT): [sample #7] ESP log summary report (C messages): @01:33:54.07 Selecting Cartridge 8 @02:24:59.80 Sampled 1000.0ml @02:25:22.00 Slide::Error in PROCESSING -- Archive Syringe positionErr at 26ul (actually 51ul) @02:25:22.02 Retry #1 of 2 @02:25:24.67 Slide::Error in PROCESSING -- Archive Syringe positionErr at 24ul (actually 49ul) @02:25:24.68 Retry #2 of 2 @02:25:27.33 Slide::Error in PROCESSING -- IGNORED Archive Syringe positionErr at 23ul (actually 49ul) @02:36:22.83 Slide::Error in PROCESSING -- Archive Syringe positionErr at 18ul (actually 44ul) @02:36:22.84 Retry #1 of 2 @02:36:25.50 Slide::Error in PROCESSING -- Archive Syringe positionErr at 18ul (actually 43ul) @02:36:25.51 Retry #2 of 2 @02:36:28.17 Slide::Error in PROCESSING -- IGNORED Archive Syringe positionErr at 18ul (actually 43ul) 2018-09-13T09:37:50.136Z,1536831470.136 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 7.000000 count completed. 2018-09-13T09:37:56.125Z,1536831476.125 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 8.000000 count . Target temp = 12.000000 degC . 2018-09-13T09:37:57.365Z,1536831477.365 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-13T10:38:00.145Z,1536835080.145 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 30.862743 m , 11.924493 degC , 0.888000 ug/l . 2018-09-13T10:38:01.718Z,1536835081.718 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-13T10:38:01.720Z,1536835081.720 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-13T10:38:01.771Z,1536835081.771 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-13T10:38:01.897Z,1536835081.897 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-13T10:38:32.888Z,1536835112.888 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-13T10:38:33.693Z,1536835113.693 [ESPComponent](IMPORTANT): [sample #8] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-13T10:38:34.189Z,1536835114.189 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-13T10:38:34.488Z,1536835114.488 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-13T10:38:34.888Z,1536835114.888 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-13T10:38:36.888Z,1536835116.888 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-13T10:39:09.688Z,1536835149.688 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_FILTERING 2018-09-13T10:39:12.088Z,1536835152.088 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-13T11:31:42.488Z,1536838302.488 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_PROCESSING 2018-09-13T11:31:44.888Z,1536838304.888 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-13T11:34:41.727Z,1536838481.727 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 7 sticks. 2018-09-13T11:43:18.488Z,1536838998.488 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_STOPPING 2018-09-13T11:43:43.689Z,1536839023.689 [ESPComponent](IMPORTANT): [sample #8] ESP sampling sequence completed normally. 2018-09-13T11:43:44.090Z,1536839024.090 [ESPComponent](IMPORTANT): [sample #8] ESP log summary report (C messages): @03:38:03.10 Selecting Cartridge 7 @04:30:54.60 Sampled 1000.0ml @04:31:16.90 Slide::Error in PROCESSING -- Archive Syringe positionErr at 21ul (actually 48ul) @04:31:16.92 Retry #1 of 2 @04:31:19.58 Slide::Error in PROCESSING -- Archive Syringe positionErr at 21ul (actually 46ul) @04:31:19.59 Retry #2 of 2 @04:31:22.26 Slide::Error in PROCESSING -- IGNORED Archive Syringe positionErr at 20ul (actually 46ul) @04:42:17.73 Slide::Error in PROCESSING -- Archive Syringe positionErr at 13ul (actually 38ul) @04:42:17.74 Retry #1 of 2 @04:42:20.40 Slide::Error in PROCESSING -- Archive Syringe positionErr at 13ul (actually 38ul) @04:42:20.41 Retry #2 of 2 @04:42:23.08 Slide::Error in PROCESSING -- IGNORED Archive Syringe positionErr at 13ul (actually 38ul) 2018-09-13T11:43:44.979Z,1536839024.979 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 8.000000 count completed. 2018-09-13T11:43:50.970Z,1536839030.970 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 9.000000 count . Target temp = 12.000000 degC . 2018-09-13T11:43:52.196Z,1536839032.196 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-13T12:30:01.472Z,1536841801.472 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-13T12:30:12.226Z,1536841812.226 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.115605 CHAN A1 (24V): -0.025925 CHAN A2 (12V): -0.004377 CHAN A3 (5V): -0.003152 CHAN B0 (3.3V): -0.000583 CHAN B1 (3.15aV): -0.001531 CHAN B2 (3.15bV): -0.001347 CHAN B3 (GND): -0.000754 OPEN: 0.005011 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-13T12:43:54.580Z,1536842634.580 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 35.530304 m , 11.801996 degC , 0.688200 ug/l . 2018-09-13T12:43:56.168Z,1536842636.168 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-13T12:43:56.169Z,1536842636.169 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-13T12:43:56.184Z,1536842636.184 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-13T12:43:56.397Z,1536842636.397 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-13T12:44:26.596Z,1536842666.596 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-13T12:44:27.401Z,1536842667.401 [ESPComponent](IMPORTANT): [sample #9] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-13T12:44:27.889Z,1536842667.889 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-13T12:44:28.197Z,1536842668.197 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-13T12:44:28.596Z,1536842668.596 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-13T12:44:30.596Z,1536842670.596 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-13T12:45:03.398Z,1536842703.398 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_FILTERING 2018-09-13T12:45:05.796Z,1536842705.796 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-13T13:38:06.596Z,1536845886.596 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_PROCESSING 2018-09-13T13:38:08.996Z,1536845888.996 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-13T13:49:42.596Z,1536846582.596 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_STOPPING 2018-09-13T13:50:07.797Z,1536846607.797 [ESPComponent](IMPORTANT): [sample #9] ESP sampling sequence completed normally. 2018-09-13T13:50:08.198Z,1536846608.198 [ESPComponent](IMPORTANT): [sample #9] ESP log summary report (C messages): @05:43:56.88 Selecting Cartridge 6 @06:37:18.62 Sampled 1000.0ml @06:37:40.22 Slide::Error in PROCESSING -- Archive Syringe positionErr at 107ul (actually 126ul) @06:37:40.24 Retry #1 of 2 @06:37:43.34 Slide::Error in PROCESSING -- Archive Syringe positionErr at 29ul (actually 51ul) @06:37:43.35 Retry #2 of 2 @06:37:46.01 Slide::Error in PROCESSING -- IGNORED Archive Syringe positionErr at 18ul (actually 42ul) @06:48:41.60 Slide::Error in PROCESSING -- Archive Syringe positionErr at 8ul (actually 30ul) @06:48:41.61 Retry #1 of 2 @06:48:44.27 Slide::Error in PROCESSING -- Archive Syringe positionErr at 7ul (actually 30ul) @06:48:44.28 Retry #2 of 2 @06:48:46.95 Slide::Error in PROCESSING -- IGNORED Archive Syringe positionErr at 7ul (actually 30ul) 2018-09-13T13:50:09.104Z,1536846609.104 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 9.000000 count completed. 2018-09-13T13:50:15.095Z,1536846615.095 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 10.000000 count . Target temp = 12.000000 degC . 2018-09-13T13:50:16.297Z,1536846616.297 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-13T14:50:19.093Z,1536850219.093 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 33.102848 m , 11.960809 degC , 0.788100 ug/l . 2018-09-13T14:50:20.668Z,1536850220.668 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-13T14:50:20.669Z,1536850220.669 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-13T14:50:20.763Z,1536850220.763 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-13T14:50:20.838Z,1536850220.838 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-13T14:50:51.435Z,1536850251.435 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-13T14:50:52.239Z,1536850252.239 [ESPComponent](IMPORTANT): [sample #10] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-13T14:50:52.706Z,1536850252.706 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-13T14:50:53.036Z,1536850253.036 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-13T14:50:53.436Z,1536850253.436 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-13T14:50:55.436Z,1536850255.436 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-13T14:51:28.237Z,1536850288.237 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_FILTERING 2018-09-13T14:51:30.641Z,1536850290.641 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-13T15:47:00.237Z,1536853620.237 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_PROCESSING 2018-09-13T15:47:02.638Z,1536853622.638 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-13T15:58:36.239Z,1536854316.239 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_STOPPING 2018-09-13T15:59:01.437Z,1536854341.437 [ESPComponent](IMPORTANT): [sample #10] ESP sampling sequence completed normally. 2018-09-13T15:59:01.838Z,1536854341.838 [ESPComponent](IMPORTANT): [sample #10] ESP log summary report (C messages): @07:50:21.46 Selecting Cartridge 5 @08:46:12.05 Sampled 1000.0ml @08:46:34.12 Slide::Error in PROCESSING -- Archive Syringe positionErr at 76ul (actually 95ul) @08:46:34.14 Retry #1 of 2 @08:46:36.95 Slide::Error in PROCESSING -- Archive Syringe positionErr at 30ul (actually 55ul) @08:46:36.96 Retry #2 of 2 @08:46:39.64 Slide::Error in PROCESSING -- IGNORED Archive Syringe positionErr at 28ul (actually 54ul) @08:57:35.14 Slide::Error in PROCESSING -- Archive Syringe positionErr at 14ul (actually 38ul) @08:57:35.15 Retry #1 of 2 @08:57:38.08 Slide::Error in PROCESSING -- Archive Syringe positionErr at 14ul (actually 38ul) @08:57:38.09 Retry #2 of 2 @08:57:40.77 Slide::Error in PROCESSING -- IGNORED Archive Syringe positionErr at 13ul (actually 38ul) 2018-09-13T15:59:02.697Z,1536854342.697 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 10.000000 count completed. 2018-09-13T15:59:08.724Z,1536854348.724 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 11.000000 count . Target temp = 12.000000 degC . 2018-09-13T15:59:09.926Z,1536854349.926 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-13T16:59:12.371Z,1536857952.371 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 34.372242 m , 11.906915 degC , 0.788100 ug/l . 2018-09-13T16:59:13.910Z,1536857953.910 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-13T16:59:13.911Z,1536857953.911 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-13T16:59:13.968Z,1536857953.968 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-13T16:59:14.094Z,1536857954.094 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-13T16:59:44.684Z,1536857984.684 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-13T16:59:45.486Z,1536857985.486 [ESPComponent](IMPORTANT): [sample #11] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-13T16:59:45.979Z,1536857985.979 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-13T16:59:46.284Z,1536857986.284 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-13T16:59:46.684Z,1536857986.684 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-13T16:59:48.684Z,1536857988.684 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-13T17:00:21.485Z,1536858021.485 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_FILTERING 2018-09-13T17:00:23.884Z,1536858023.884 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-13T17:51:20.687Z,1536861080.687 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_PROCESSING 2018-09-13T17:51:23.084Z,1536861083.084 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-13T18:02:46.284Z,1536861766.284 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_STOPPING 2018-09-13T18:03:11.485Z,1536861791.485 [ESPComponent](IMPORTANT): [sample #11] ESP sampling sequence completed normally. 2018-09-13T18:03:11.885Z,1536861791.885 [ESPComponent](IMPORTANT): [sample #11] ESP log summary report (2 messages): @09:59:14.96 Selecting Cartridge 4 @10:50:32.79 Sampled 1000.0ml 2018-09-13T18:03:12.801Z,1536861792.801 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 11.000000 count completed. 2018-09-13T18:03:18.758Z,1536861798.758 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 12.000000 count . Target temp = 12.000000 degC . 2018-09-13T18:03:19.964Z,1536861799.964 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-13T18:30:12.467Z,1536863412.467 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-13T18:30:23.198Z,1536863423.198 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.115693 CHAN A1 (24V): -0.025610 CHAN A2 (12V): -0.004098 CHAN A3 (5V): -0.002755 CHAN B0 (3.3V): -0.001231 CHAN B1 (3.15aV): -0.001178 CHAN B2 (3.15bV): -0.001037 CHAN B3 (GND): -0.000494 OPEN: 0.004924 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-13T19:03:22.775Z,1536865402.775 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 33.143108 m , 11.968805 degC , 0.965700 ug/l . 2018-09-13T19:03:24.366Z,1536865404.366 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-13T19:03:24.368Z,1536865404.368 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-13T19:03:24.416Z,1536865404.416 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-13T19:03:24.596Z,1536865404.596 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-13T19:03:55.164Z,1536865435.164 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-13T19:03:55.967Z,1536865435.967 [ESPComponent](IMPORTANT): [sample #12] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-13T19:03:56.444Z,1536865436.444 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-13T19:03:56.764Z,1536865436.764 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-13T19:03:57.164Z,1536865437.164 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-13T19:03:59.164Z,1536865439.164 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-13T19:04:31.967Z,1536865471.967 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_FILTERING 2018-09-13T19:04:34.369Z,1536865474.369 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-13T19:57:31.965Z,1536868651.965 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_PROCESSING 2018-09-13T19:57:34.366Z,1536868654.366 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-13T20:08:57.564Z,1536869337.564 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_STOPPING 2018-09-13T20:09:22.765Z,1536869362.765 [ESPComponent](IMPORTANT): [sample #12] ESP sampling sequence completed normally. 2018-09-13T20:09:23.164Z,1536869363.164 [ESPComponent](IMPORTANT): [sample #12] ESP log summary report (2 messages): @12:03:25.25 Selecting Cartridge 3 @12:56:44.07 Sampled 1000.0ml 2018-09-13T20:09:24.042Z,1536869364.042 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 12.000000 count completed. 2018-09-13T20:09:30.049Z,1536869370.049 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 13.000000 count . Target temp = 12.000000 degC . 2018-09-13T20:09:31.253Z,1536869371.253 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-13T21:09:34.059Z,1536872974.059 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 34.996502 m , 12.153589 degC , 0.432900 ug/l . 2018-09-13T21:09:35.640Z,1536872975.640 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-13T21:09:35.641Z,1536872975.641 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-13T21:09:35.668Z,1536872975.668 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-13T21:09:35.811Z,1536872975.811 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-13T21:10:06.804Z,1536873006.804 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-13T21:10:07.606Z,1536873007.606 [ESPComponent](IMPORTANT): [sample #13] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-13T21:10:08.105Z,1536873008.105 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-13T21:10:08.404Z,1536873008.404 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-13T21:10:08.804Z,1536873008.804 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-13T21:10:10.804Z,1536873010.804 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-13T21:10:43.604Z,1536873043.604 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_FILTERING 2018-09-13T21:10:46.804Z,1536873046.804 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-13T21:37:50.055Z,1536874670.055 [DAT](FAULT): unknown deviceResponse_: R:12.4 AGC:64 SPD:+01.4 CCERR:009 2018-09-13T21:37:53.752Z,1536874673.752 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-13T21:45:00.053Z,1536875100.053 [DAT](FAULT): unknown deviceResponse_: > 2018-09-13T21:45:03.687Z,1536875103.687 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-13T21:55:30.463Z,1536875730.463 [DAT](FAULT): unknown deviceResponse_: OP> 2018-09-13T21:55:34.071Z,1536875734.071 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-13T21:57:00.475Z,1536875820.475 [DAT](FAULT): unknown deviceResponse_: .9 CCERR:010 2018-09-13T21:57:04.068Z,1536875824.068 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-13T22:01:41.607Z,1536876101.607 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_PROCESSING 2018-09-13T22:01:44.004Z,1536876104.004 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-13T22:13:07.206Z,1536876787.206 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_STOPPING 2018-09-13T22:13:32.409Z,1536876812.409 [ESPComponent](IMPORTANT): [sample #13] ESP sampling sequence completed normally. 2018-09-13T22:13:32.810Z,1536876812.810 [ESPComponent](IMPORTANT): [sample #13] ESP log summary report (2 messages): @14:09:37.10 Selecting Cartridge 2 @15:00:53.75 Sampled 1000.0ml 2018-09-13T22:13:33.694Z,1536876813.694 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 13.000000 count completed. 2018-09-13T22:13:39.707Z,1536876819.707 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 14.000000 count . Target temp = 12.000000 degC . 2018-09-13T22:13:40.911Z,1536876820.911 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-13T23:13:43.706Z,1536880423.706 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 25.663740 m , 12.012994 degC , 0.954600 ug/l . 2018-09-13T23:13:45.274Z,1536880425.274 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-13T23:13:45.291Z,1536880425.291 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-13T23:13:45.330Z,1536880425.330 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-13T23:13:45.517Z,1536880425.517 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-13T23:14:15.716Z,1536880455.716 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-13T23:14:16.519Z,1536880456.519 [ESPComponent](IMPORTANT): [sample #14] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-13T23:14:17.013Z,1536880457.013 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-13T23:14:17.316Z,1536880457.316 [ESPComponent](IMPORTANT): [sample #14] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-13T23:14:17.717Z,1536880457.717 [ESPComponent](IMPORTANT): [sample #14] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-13T23:14:19.716Z,1536880459.716 [ESPComponent](IMPORTANT): [sample #14] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-13T23:14:22.116Z,1536880462.116 [ESPComponent](IMPORTANT): [sample #14] ESP sampling state: S_STOPPING 2018-09-13T23:14:24.664Z,1536880464.664 [CommandLine](FAULT): Scheduling is paused 2018-09-13T23:14:24.918Z,1536880464.918 [ESPComponent](IMPORTANT): [sample #14] No ESP summary messages. 2018-09-13T23:14:25.668Z,1536880465.668 [WetLabsBB2FL](FAULT): LCB fault: Software Overcurrent. 2018-09-13T23:14:25.871Z,1536880465.871 [CTD_Seabird](FAULT): LCB fault: Software Overcurrent. 2018-09-13T23:14:26.262Z,1536880466.262 [MissionManager](IMPORTANT): Started mission Default 2018-09-13T23:14:27.344Z,1536880467.344 [ESPComponent](IMPORTANT): [sample #14] No ESP summary messages. 2018-09-13T23:21:24.239Z,1536880884.239 [DAT](FAULT): unknown deviceResponse_: SPD:+00.0 2018-09-13T23:21:27.880Z,1536880887.880 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-13T23:30:52.475Z,1536881452.475 [DAT](FAULT): unknown deviceResponse_: 8 MPD:20.6 SPD:+01.4 2018-09-13T23:30:56.099Z,1536881456.099 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-13T23:40:04.248Z,1536882004.248 [NAL9602](FAULT): Verify xmit timeout failure. 2018-09-13T23:48:38.547Z,1536882518.547 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:06.3 CCERR:004 2018-09-13T23:48:42.244Z,1536882522.244 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-14T00:03:44.183Z,1536883424.183 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 49.292147 min 2018-09-14T00:03:56.948Z,1536883436.948 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-14T00:08:43.863Z,1536883723.863 [DataOverHttps](IMPORTANT): SBD MTMSN=20180914T000800 2018-09-14T00:08:50.271Z,1536883730.271 [CommandLine](IMPORTANT): got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 14 hour;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree;set profile_station.YoYoMaxDepth 50 meter" 4iz0o 1 2.000000 2018-09-14T00:08:50.272Z,1536883730.272 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=4iz0o 2018-09-14T00:08:50.273Z,1536883730.273 [CommandLine](IMPORTANT): Scheduled #1 (#1 of 2 with id='4iz0o'): "load Science/profile_station.xml;set profile_station.MissionTimeout 14 hour;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree;set profile_station.YoYoMaxDepth 50 meter" ASAP 2018-09-14T00:08:51.378Z,1536883731.378 [DataOverHttps](IMPORTANT): SBD MOMSN=8521309, MTMSN=20180914T000808 2018-09-14T00:08:56.280Z,1536883736.280 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.YoYoMinAltitude 1 meter;set profile_station.MinAltitude 1 meter;set profile_station.MaxDepth 55 meter;run " 4iz0o 2 2.000000 2018-09-14T00:08:56.281Z,1536883736.281 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=4iz0o 2018-09-14T00:08:56.282Z,1536883736.282 [CommandLine](IMPORTANT): Scheduled #2 (#2 of 2 with id='4iz0o'): "set profile_station.YoYoMinAltitude 1 meter;set profile_station.MinAltitude 1 meter;set profile_station.MaxDepth 55 meter;run " ASAP 2018-09-14T00:08:56.396Z,1536883736.396 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml 2018-09-14T00:08:58.292Z,1536883738.292 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml 2018-09-14T00:09:18.103Z,1536883758.103 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 14.000000 hour 2018-09-14T00:09:18.104Z,1536883758.104 [CommandLine](IMPORTANT): got command set profile_station.Lat 36.797001 degree 2018-09-14T00:09:18.104Z,1536883758.104 [CommandLine](IMPORTANT): got command set profile_station.Lon -121.847000 degree 2018-09-14T00:09:18.105Z,1536883758.105 [CommandLine](IMPORTANT): got command set profile_station.YoYoMaxDepth 50.000000 meter 2018-09-14T00:09:32.082Z,1536883772.082 [CommandLine](IMPORTANT): got command set profile_station.YoYoMinAltitude 1.000000 meter 2018-09-14T00:09:32.083Z,1536883772.083 [CommandLine](IMPORTANT): got command set profile_station.MinAltitude 1.000000 meter 2018-09-14T00:09:32.084Z,1536883772.084 [CommandLine](IMPORTANT): got command set profile_station.MaxDepth 55.000000 meter 2018-09-14T00:09:32.084Z,1536883772.084 [CommandLine](IMPORTANT): got command run 2018-09-14T00:09:32.088Z,1536883772.088 [CommandLine](IMPORTANT): Running 2018-09-14T00:09:32.258Z,1536883772.258 [MissionManager](IMPORTANT): Started mission profile_station 2018-09-14T00:15:45.270Z,1536884145.270 [DAT](FAULT): unknown deviceResponse_: .9 CCERR:003 2018-09-14T00:15:45.808Z,1536884145.808 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-09-14T00:15:48.716Z,1536884148.716 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-14T00:28:30.205Z,1536884910.205 [DAT](FAULT): unknown deviceResponse_: ion stats SNR:49.8 MPD:03.4 SPD:+07.8 2018-09-14T00:28:33.907Z,1536884913.907 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-14T00:30:23.555Z,1536885023.555 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-14T00:30:34.371Z,1536885034.371 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.114616 CHAN A1 (24V): -0.025348 CHAN A2 (12V): -0.003801 CHAN A3 (5V): -0.002910 CHAN B0 (3.3V): -0.001182 CHAN B1 (3.15aV): -0.001206 CHAN B2 (3.15bV): -0.001584 CHAN B3 (GND): -0.000721 OPEN: 0.005136 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-14T00:36:59.821Z,1536885419.821 [DAT](FAULT): unknown deviceResponse_: er stats CRC:Fail SNR:05.5 CCERR:004 2018-09-14T00:37:03.452Z,1536885423.452 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-14T00:39:13.106Z,1536885553.106 [DAT](FAULT): unknown deviceResponse_: 6 2018-09-14T00:39:16.727Z,1536885556.727 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-14T00:53:57.083Z,1536886437.083 [DAT](FAULT): unknown deviceResponse_: tats CRC:Fail SNR:06.5 CCERR:005 2018-09-14T00:54:00.727Z,1536886440.727 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-14T00:59:10.305Z,1536886750.305 [DAT](FAULT): unknown deviceResponse_: eader stats CRC:Fail SNR:08.1 CCERR:003 2018-09-14T00:59:13.935Z,1536886753.935 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-14T01:22:22.285Z,1536888142.285 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=49534, MT Status=1, MTMSN=1542 2018-09-14T01:22:23.041Z,1536888143.041 [CommandLine](IMPORTANT): got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 14 hour;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree;set profile_station.YoYoMaxDepth 50 meter" 4j23t 1 2.000000 2018-09-14T01:22:23.041Z,1536888143.041 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=4j23t 2018-09-14T01:22:23.042Z,1536888143.042 [CommandLine](IMPORTANT): Scheduled #3 (#1 of 2 with id='4j23t'): "load Science/profile_station.xml;set profile_station.MissionTimeout 14 hour;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree;set profile_station.YoYoMaxDepth 50 meter" ASAP 2018-09-14T01:27:42.838Z,1536888462.838 [profile_station:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-14T01:27:59.729Z,1536888479.729 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=49535, MT Status=1, MTMSN=1543 2018-09-14T01:28:00.441Z,1536888480.441 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.YoYoMinAltitude 1 meter;set profile_station.Speed 0.8 meter_per_second;set profile_station.MinAltitude 1 meter;set profile_station.MaxDepth 55 meter;run " 4j23t 2 2.000000 2018-09-14T01:28:00.442Z,1536888480.442 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=4j23t 2018-09-14T01:28:00.443Z,1536888480.443 [CommandLine](IMPORTANT): Scheduled #4 (#2 of 2 with id='4j23t'): "set profile_station.YoYoMinAltitude 1 meter;set profile_station.Speed 0.8 meter_per_second;set profile_station.MinAltitude 1 meter;set profile_station.MaxDepth 55 meter;run " ASAP 2018-09-14T01:28:00.631Z,1536888480.631 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml 2018-09-14T01:28:01.659Z,1536888481.659 [CTD_Seabird](FAULT): LCB fault: Software Overcurrent. 2018-09-14T01:28:02.444Z,1536888482.444 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml 2018-09-14T01:28:02.615Z,1536888482.615 [MissionManager](IMPORTANT): Started mission Default 2018-09-14T01:28:18.258Z,1536888498.258 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 14.000000 hour 2018-09-14T01:28:18.260Z,1536888498.260 [CommandLine](IMPORTANT): got command set profile_station.Lat 36.797001 degree 2018-09-14T01:28:18.260Z,1536888498.260 [CommandLine](IMPORTANT): got command set profile_station.Lon -121.847000 degree 2018-09-14T01:28:18.261Z,1536888498.261 [CommandLine](IMPORTANT): got command set profile_station.YoYoMaxDepth 50.000000 meter 2018-09-14T01:28:34.810Z,1536888514.810 [CommandLine](IMPORTANT): got command set profile_station.YoYoMinAltitude 1.000000 meter 2018-09-14T01:28:34.811Z,1536888514.811 [CommandLine](IMPORTANT): got command set profile_station.Speed 0.800000 meter_per_second 2018-09-14T01:28:34.812Z,1536888514.812 [CommandLine](IMPORTANT): got command set profile_station.MinAltitude 1.000000 meter 2018-09-14T01:28:34.813Z,1536888514.813 [CommandLine](IMPORTANT): got command set profile_station.MaxDepth 55.000000 meter 2018-09-14T01:28:34.813Z,1536888514.813 [CommandLine](IMPORTANT): got command run 2018-09-14T01:28:34.816Z,1536888514.816 [CommandLine](IMPORTANT): Running 2018-09-14T01:28:35.023Z,1536888515.023 [MissionManager](IMPORTANT): Started mission profile_station 2018-09-14T01:33:36.318Z,1536888816.318 [DAT](FAULT): unknown deviceResponse_: +00.4 AGC:81 2018-09-14T01:33:39.991Z,1536888819.991 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-14T01:34:39.378Z,1536888879.378 [DAT](FAULT): unknown deviceResponse_: NR:49.8 MPD:03.2 SPD:+00.0 2018-09-14T01:34:42.995Z,1536888882.995 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-14T01:52:22.916Z,1536889942.916 [DAT](FAULT): unknown deviceResponse_: s SNR:49.8 MPD:03.3 SPD:+11.8 2018-09-14T01:52:26.540Z,1536889946.540 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-14T02:44:19.583Z,1536893059.583 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-14T02:44:21.366Z,1536893061.366 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-14T03:56:47.643Z,1536897407.643 [CBIT](CRITICAL): Hardware Fault in component: ThrusterServo 2018-09-14T03:57:58.981Z,1536897478.981 [CBIT](CRITICAL): Hardware Fault in component: ThrusterServo 2018-09-14T03:59:12.980Z,1536897552.980 [CBIT](CRITICAL): Hardware Fault in component: ThrusterServo 2018-09-14T04:00:24.548Z,1536897624.548 [CBIT](CRITICAL): Hardware Fault in component: ThrusterServo 2018-09-14T02:48:43.509Z,1536893323.509 [NAL9602](FAULT): Verify xmit timeout failure. 2018-09-14T02:49:52.764Z,1536893392.764 [DAT](FAULT): unknown deviceResponse_: 8 MPD:10.0 SPD:+00.0 2018-09-14T02:49:56.375Z,1536893396.375 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-14T02:51:57.581Z,1536893517.581 [DAT](FAULT): unknown deviceResponse_: 4 2018-09-14T02:52:01.183Z,1536893521.183 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-14T02:55:09.129Z,1536893709.129 [profile_station:NeedComms:E:A_Timeout:A](IMPORTANT): second GPS update timeout 2018-09-14T03:56:12.219Z,1536897372.219 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:56:12.761Z,1536897372.761 [ThrusterServo](FAULT): LCB fault: LCB Watchdog Reset. Hardware Overcurrent Shutdown. Current Limiter Activated. 2018-09-14T03:56:20.819Z,1536897380.819 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:56:29.654Z,1536897389.654 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:56:38.475Z,1536897398.475 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:56:47.639Z,1536897407.639 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:56:48.513Z,1536897408.513 [MissionManager](IMPORTANT): Started mission Default 2018-09-14T03:56:48.688Z,1536897408.688 [WetLabsBB2FL](FAULT): LCB fault: Software Overcurrent. 2018-09-14T03:57:24.566Z,1536897444.566 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:57:32.987Z,1536897452.987 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:57:41.383Z,1536897461.383 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:57:50.183Z,1536897470.183 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:57:58.976Z,1536897478.976 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:58:24.819Z,1536897504.819 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-14T03:58:26.519Z,1536897506.519 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-14T03:58:36.595Z,1536897516.595 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:58:45.499Z,1536897525.499 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:58:54.606Z,1536897534.606 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:59:03.771Z,1536897543.771 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:59:12.975Z,1536897552.975 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:59:50.199Z,1536897590.199 [ThrusterServo](FAULT): Overload Error 2018-09-14T03:59:59.059Z,1536897599.059 [ThrusterServo](FAULT): Overload Error 2018-09-14T04:00:07.394Z,1536897607.394 [ThrusterServo](FAULT): Overload Error 2018-09-14T04:00:16.172Z,1536897616.172 [ThrusterServo](FAULT): Overload Error 2018-09-14T04:00:24.543Z,1536897624.543 [ThrusterServo](FAULT): Overload Error 2018-09-14T04:01:12.267Z,1536897672.267 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-14T04:11:27.764Z,1536898287.764 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 14.647527 min 2018-09-14T04:12:08.925Z,1536898328.925 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-14T04:15:47.834Z,1536898547.834 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=49560, MT Status=1, MTMSN=1544 2018-09-14T04:15:51.462Z,1536898551.462 [CommandLine](IMPORTANT): got command get ThrusterServo.currLimit 2018-09-14T04:15:51.463Z,1536898551.463 [CommandLine](IMPORTANT): ThrusterServo.currLimit 30.000001 % 2018-09-14T04:15:51.463Z,1536898551.463 [CommandLine](IMPORTANT): got command get BPC1.platform_battery_voltage 2018-09-14T04:15:51.464Z,1536898551.464 [CommandLine](IMPORTANT): BPC1.platform_battery_voltage 15.033129 V 2018-09-14T04:21:38.781Z,1536898898.781 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 24.831120 min 2018-09-14T04:22:45.156Z,1536898965.156 [DataOverHttps](IMPORTANT): SBD MTMSN=20180914T042201 2018-09-14T04:22:52.212Z,1536898972.212 [CommandLine](IMPORTANT): got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 14 hour;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree;set profile_station.YoYoMinDepth 10 meter" 4jarw 1 2.000000 2018-09-14T04:22:52.212Z,1536898972.212 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=4jarw 2018-09-14T04:22:52.213Z,1536898972.213 [CommandLine](IMPORTANT): Scheduled #5 (#1 of 2 with id='4jarw'): "load Science/profile_station.xml;set profile_station.MissionTimeout 14 hour;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree;set profile_station.YoYoMinDepth 10 meter" ASAP 2018-09-14T04:22:53.386Z,1536898973.386 [DataOverHttps](IMPORTANT): SBD MTMSN=20180914T042210 2018-09-14T04:23:01.317Z,1536898981.317 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.YoYoMaxDepth 50 meter;set profile_station.YoYoMinAltitude 1 meter;set profile_station.Speed 0.65 meter_per_second;set profile_station.MinAltitude 1 meter;set profile_station.MaxDepth 55 meter;run " 4jarw 2 2.000000 2018-09-14T04:23:01.317Z,1536898981.317 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=4jarw 2018-09-14T04:23:01.318Z,1536898981.318 [CommandLine](IMPORTANT): Scheduled #6 (#2 of 2 with id='4jarw'): "set profile_station.YoYoMaxDepth 50 meter;set profile_station.YoYoMinAltitude 1 meter;set profile_station.Speed 0.65 meter_per_second;set profile_station.MinAltitude 1 meter;set profile_station.MaxDepth 55 meter;run " ASAP 2018-09-14T04:23:01.385Z,1536898981.385 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml 2018-09-14T04:23:02.814Z,1536898982.814 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml 2018-09-14T04:23:18.645Z,1536898998.645 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 14.000000 hour 2018-09-14T04:23:18.646Z,1536898998.646 [CommandLine](IMPORTANT): got command set profile_station.Lat 36.797001 degree 2018-09-14T04:23:18.647Z,1536898998.647 [CommandLine](IMPORTANT): got command set profile_station.Lon -121.847000 degree 2018-09-14T04:23:18.648Z,1536898998.648 [CommandLine](IMPORTANT): got command set profile_station.YoYoMinDepth 10.000000 meter 2018-09-14T04:23:41.424Z,1536899021.424 [CommandLine](IMPORTANT): got command set profile_station.YoYoMaxDepth 50.000000 meter 2018-09-14T04:23:41.425Z,1536899021.425 [CommandLine](IMPORTANT): got command set profile_station.YoYoMinAltitude 1.000000 meter 2018-09-14T04:23:41.426Z,1536899021.426 [CommandLine](IMPORTANT): got command set profile_station.Speed 0.650000 meter_per_second 2018-09-14T04:23:41.427Z,1536899021.427 [CommandLine](IMPORTANT): got command set profile_station.MinAltitude 1.000000 meter 2018-09-14T04:23:41.427Z,1536899021.427 [CommandLine](IMPORTANT): got command set profile_station.MaxDepth 55.000000 meter 2018-09-14T04:23:41.428Z,1536899021.428 [CommandLine](IMPORTANT): got command run 2018-09-14T04:23:41.431Z,1536899021.431 [CommandLine](IMPORTANT): Running 2018-09-14T04:23:41.718Z,1536899021.718 [MissionManager](IMPORTANT): Started mission profile_station 2018-09-14T05:39:01.083Z,1536903541.083 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-14T05:39:02.816Z,1536903542.816 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-14T05:45:31.860Z,1536903931.860 [profile_station:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-14T05:48:44.492Z,1536904124.492 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-14T06:30:34.492Z,1536906634.492 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-14T06:30:45.162Z,1536906645.162 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.113242 CHAN A1 (24V): -0.025953 CHAN A2 (12V): -0.004031 CHAN A3 (5V): -0.002510 CHAN B0 (3.3V): -0.001078 CHAN B1 (3.15aV): -0.001323 CHAN B2 (3.15bV): -0.001187 CHAN B3 (GND): -0.000204 OPEN: 0.005182 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-14T07:31:31.920Z,1536910291.920 [ThrusterServo](FAULT): Invalid EZ Servo response:"" 2018-09-14T08:09:58.929Z,1536912598.929 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks. 2018-09-14T11:54:20.655Z,1536926060.655 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 7 sticks. 2018-09-14T12:30:45.175Z,1536928245.175 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-14T12:30:55.971Z,1536928255.971 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.113266 CHAN A1 (24V): -0.025455 CHAN A2 (12V): -0.004113 CHAN A3 (5V): -0.002748 CHAN B0 (3.3V): -0.000855 CHAN B1 (3.15aV): -0.001367 CHAN B2 (3.15bV): -0.001055 CHAN B3 (GND): -0.000837 OPEN: 0.004979 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-14T14:01:51.859Z,1536933711.859 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-14T15:12:38.895Z,1536937958.895 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-14T15:12:40.643Z,1536937960.643 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-14T15:36:23.465Z,1536939383.465 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks. 2018-09-14T16:16:18.763Z,1536941778.763 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-14T16:16:20.530Z,1536941780.530 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-14T17:28:17.182Z,1536946097.182 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=49627, MT Status=1, MTMSN=1545 2018-09-14T17:28:17.695Z,1536946097.695 [CommandLine](IMPORTANT): got command schedule clear 2018-09-14T17:28:17.695Z,1536946097.695 [CommandLine](IMPORTANT): #Cleared scheduled commands:0 2018-09-14T17:29:06.957Z,1536946146.957 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=49628, MT Status=1, MTMSN=1546 2018-09-14T17:29:07.712Z,1536946147.712 [CommandLine](IMPORTANT): got command schedule "load Transport/keepstation.xml;set keepstation.MissionTimeout 72 hour;set keepstation.NeedCommsTime 60 minute;set keepstation.Latitude 36.797 degree;set keepstation.Longitude -121.847 degree;set keepstation.ApproachDepth 30 meter;run " 2018-09-14T17:29:07.712Z,1536946147.712 [CommandLine](IMPORTANT): Scheduled #7: "load Transport/keepstation.xml;set keepstation.MissionTimeout 72 hour;set keepstation.NeedCommsTime 60 minute;set keepstation.Latitude 36.797 degree;set keepstation.Longitude -121.847 degree;set keepstation.ApproachDepth 30 meter;run " 2018-09-14T17:29:07.713Z,1536946147.713 [CommandLine](FAULT): Scheduling was paused by an error at 2018-09-14T04:00:24Z 2018-09-14T17:29:34.882Z,1536946174.882 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=49629, MT Status=1, MTMSN=1547 2018-09-14T17:29:35.427Z,1536946175.427 [CommandLine](IMPORTANT): got command schedule resume 2018-09-14T17:29:35.427Z,1536946175.427 [CommandLine](IMPORTANT): Scheduling is resumed 2018-09-14T17:29:35.428Z,1536946175.428 [CommandLine](IMPORTANT): got command schedule list 2018-09-14T17:29:35.428Z,1536946175.428 [CommandLine](IMPORTANT): Scheduled #7: "load Transport/keepstation.xml;set keepstation.MissionTimeout 72 hour;set keepstation.NeedCommsTime 60 minute;set keepstation.Latitude 36.797 degree;set keepstation.Longitude -121.847 degree;set keepstation.ApproachDepth 30 meter;run " 2018-09-14T18:23:42.004Z,1536949422.004 [CommandLine](IMPORTANT): got command load ./Missions/Transport/keepstation.xml 2018-09-14T18:23:42.972Z,1536949422.972 [CommandLine](IMPORTANT): Loaded ./Missions/Transport/keepstation.xml 2018-09-14T18:23:43.085Z,1536949423.085 [MissionManager](IMPORTANT): Started mission Default 2018-09-14T18:23:43.116Z,1536949423.116 [CTD_Seabird](FAULT): LCB fault: Software Overcurrent. 2018-09-14T18:24:07.051Z,1536949447.051 [CommandLine](IMPORTANT): got command set keepstation.MissionTimeout 72.000000 hour 2018-09-14T18:24:07.052Z,1536949447.052 [CommandLine](IMPORTANT): got command set keepstation.NeedCommsTime 60.000000 minute 2018-09-14T18:24:07.053Z,1536949447.053 [CommandLine](IMPORTANT): got command set keepstation.Latitude 36.797001 degree 2018-09-14T18:24:07.055Z,1536949447.055 [CommandLine](IMPORTANT): got command set keepstation.Longitude -121.847000 degree 2018-09-14T18:24:07.055Z,1536949447.055 [CommandLine](IMPORTANT): got command set keepstation.ApproachDepth 30.000000 meter 2018-09-14T18:24:07.056Z,1536949447.056 [CommandLine](IMPORTANT): got command run 2018-09-14T18:24:07.096Z,1536949447.096 [CommandLine](IMPORTANT): Running 2018-09-14T18:24:07.292Z,1536949447.292 [MissionManager](IMPORTANT): Started mission keepstation 2018-09-14T18:25:15.243Z,1536949515.243 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-14T18:25:16.951Z,1536949516.951 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-14T18:30:56.059Z,1536949856.059 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-14T18:31:06.850Z,1536949866.850 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.113489 CHAN A1 (24V): -0.025235 CHAN A2 (12V): -0.003874 CHAN A3 (5V): -0.002489 CHAN B0 (3.3V): -0.001116 CHAN B1 (3.15aV): -0.001252 CHAN B2 (3.15bV): -0.001185 CHAN B3 (GND): -0.001081 OPEN: 0.005020 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-14T18:40:11.940Z,1536950411.940 [keepstation:TransitToStation:Wpt1.Waypoint](IMPORTANT): Reached Waypoint: 36.797002,-121.846996 2018-09-14T20:05:54.871Z,1536955554.871 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-14T20:05:56.600Z,1536955556.600 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-14T21:19:32.204Z,1536959972.204 [keepstation:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-14T22:33:24.596Z,1536964404.596 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-14T22:33:26.308Z,1536964406.308 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-14T22:43:22.664Z,1536965002.664 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 7 sticks. 2018-09-14T23:46:18.329Z,1536968778.329 [keepstation:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-14T23:49:31.956Z,1536968971.956 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-14T23:53:49.008Z,1536969229.008 [keepstation:NeedComms:E:A_Timeout:A](IMPORTANT): second GPS update timeout 2018-09-15T00:31:07.200Z,1536971467.200 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-15T00:31:18.013Z,1536971478.013 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.113359 CHAN A1 (24V): -0.025182 CHAN A2 (12V): -0.004021 CHAN A3 (5V): -0.002680 CHAN B0 (3.3V): -0.001086 CHAN B1 (3.15aV): -0.001455 CHAN B2 (3.15bV): -0.000847 CHAN B3 (GND): -0.000801 OPEN: 0.004665 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-15T01:15:33.032Z,1536974133.032 [keepstation:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-15T02:35:16.516Z,1536978916.516 [keepstation:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-15T03:54:29.349Z,1536983669.349 [keepstation:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-15T06:21:25.863Z,1536992485.863 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=49666, MT Status=1, MTMSN=1548 2018-09-15T06:21:26.399Z,1536992486.399 [CommandLine](IMPORTANT): got command schedule asap "restart logs" 4l7oe 1 2.000000 2018-09-15T06:21:26.399Z,1536992486.399 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=4l7oe 2018-09-15T06:21:26.400Z,1536992486.400 [CommandLine](IMPORTANT): Scheduled #8 (#1 of 2 with id='4l7oe'): "restart logs" ASAP 2018-09-15T06:31:18.015Z,1536993078.015 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-15T06:31:28.786Z,1536993088.786 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.112333 CHAN A1 (24V): -0.024833 CHAN A2 (12V): -0.003915 CHAN A3 (5V): -0.002672 CHAN B0 (3.3V): -0.000725 CHAN B1 (3.15aV): -0.001355 CHAN B2 (3.15bV): -0.001085 CHAN B3 (GND): -0.000989 OPEN: 0.004994 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-15T07:36:15.461Z,1536996975.461 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=49667, MT Status=1, MTMSN=1549 2018-09-15T07:36:16.012Z,1536996976.012 [CommandLine](IMPORTANT): got command schedule asap "" 4l7oe 2 2.000000 2018-09-15T07:36:16.012Z,1536996976.012 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=4l7oe 2018-09-15T07:36:16.013Z,1536996976.013 [CommandLine](IMPORTANT): Scheduled #9 (#2 of 2 with id='4l7oe'): "" ASAP