2018-09-08T08:44:30.054Z,1536396270.054 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg 2018-09-08T08:44:35.127Z,1536396275.127 [SBIT](IMPORTANT): git: 2018-09-06 2018-09-08T08:44:35.128Z,1536396275.128 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2018-09-08T08:44:36.423Z,1536396276.423 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-08T08:44:37.866Z,1536396277.866 [BuoyancyServo](FAULT): Buoyancy failed to initialize 2018-09-08T08:45:03.786Z,1536396303.786 [SBIT](IMPORTANT): Beginning Startup BIT 2018-09-08T08:45:03.799Z,1536396303.799 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-08T08:45:14.734Z,1536396314.734 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.011484 CHAN A1 (24V): -0.026735 CHAN A2 (12V): -0.004925 CHAN A3 (5V): -0.003001 CHAN B0 (3.3V): -0.001043 CHAN B1 (3.15aV): -0.000846 CHAN B2 (3.15bV): -0.000623 CHAN B3 (GND): -0.000598 OPEN: 0.004217 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-08T08:45:57.814Z,1536396357.814 [SBIT](IMPORTANT): SBIT PASSED 2018-09-08T08:45:57.887Z,1536396357.887 [CommandLine](IMPORTANT): got command configSet list 2018-09-08T08:45:57.888Z,1536396357.888 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2018-09-08T08:45:57.888Z,1536396357.888 [CommandLine](IMPORTANT): CBIT.gf24Offset=180 microampere; 2018-09-08T08:45:57.889Z,1536396357.889 [CommandLine](IMPORTANT): Express none ESPComponent.sample_number; 2018-09-08T08:45:57.889Z,1536396357.889 [CommandLine](IMPORTANT): Express none ESPComponent.sampling; 2018-09-08T08:45:57.889Z,1536396357.889 [CommandLine](IMPORTANT): Express linearApproximation depth 5.000000 meter; 2018-09-08T08:45:57.889Z,1536396357.889 [CommandLine](IMPORTANT): Express linearApproximation latitude 0.005000 angular_degree; 2018-09-08T08:45:57.889Z,1536396357.889 [CommandLine](IMPORTANT): Express linearApproximation longitude 0.005000 angular_degree; 2018-09-08T08:45:57.889Z,1536396357.889 [CommandLine](IMPORTANT): Express linearApproximation sea_water_temperature 0.250000 kelvin; 2018-09-08T08:45:57.889Z,1536396357.889 [CommandLine](IMPORTANT): RDI_Pathfinder.loadAtStartup=0 bool; 2018-09-08T08:45:58.206Z,1536396358.206 [MissionManager](IMPORTANT): Started mission Startup 2018-09-08T08:47:58.859Z,1536396478.859 [MissionManager](IMPORTANT): Started mission Default 2018-09-08T08:53:34.521Z,1536396814.521 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=48840, MT Status=1, MTMSN=1513 2018-09-08T08:53:35.180Z,1536396815.180 [CommandLine](IMPORTANT): got command schedule asap "config list" 48j5q 1 2.000000 2018-09-08T08:53:35.181Z,1536396815.181 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=48j5q 2018-09-08T08:53:35.182Z,1536396815.182 [CommandLine](IMPORTANT): Scheduled #1 (#1 of 2 with id='48j5q'): "config list" ASAP 2018-09-08T08:53:53.037Z,1536396833.037 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=48841, MT Status=1, MTMSN=1514 2018-09-08T08:53:53.787Z,1536396833.787 [CommandLine](IMPORTANT): got command schedule asap "" 48j5q 2 2.000000 2018-09-08T08:53:53.787Z,1536396833.787 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=48j5q 2018-09-08T08:53:53.788Z,1536396833.788 [CommandLine](IMPORTANT): Scheduled #2 (#2 of 2 with id='48j5q'): "" ASAP 2018-09-08T08:53:53.923Z,1536396833.923 [CommandLine](IMPORTANT): got command configSet list 2018-09-08T08:53:53.924Z,1536396833.924 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2018-09-08T08:53:53.924Z,1536396833.924 [CommandLine](IMPORTANT): CBIT.gf24Offset=180 microampere; 2018-09-08T08:53:53.924Z,1536396833.924 [CommandLine](IMPORTANT): Express none ESPComponent.sample_number; 2018-09-08T08:53:53.925Z,1536396833.925 [CommandLine](IMPORTANT): Express none ESPComponent.sampling; 2018-09-08T08:53:53.925Z,1536396833.925 [CommandLine](IMPORTANT): Express linearApproximation depth 5.000000 meter; 2018-09-08T08:53:53.925Z,1536396833.925 [CommandLine](IMPORTANT): Express linearApproximation latitude 0.005000 angular_degree; 2018-09-08T08:53:53.925Z,1536396833.925 [CommandLine](IMPORTANT): Express linearApproximation longitude 0.005000 angular_degree; 2018-09-08T08:53:53.925Z,1536396833.925 [CommandLine](IMPORTANT): Express linearApproximation sea_water_temperature 0.250000 kelvin; 2018-09-08T08:53:53.925Z,1536396833.925 [CommandLine](IMPORTANT): RDI_Pathfinder.loadAtStartup=0 bool; 2018-09-08T08:55:46.816Z,1536396946.816 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-08T08:57:09.443Z,1536397029.443 [DAT](FAULT): unknown deviceResponse_: 00.1 2018-09-08T08:57:13.094Z,1536397033.094 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-08T09:02:01.823Z,1536397321.823 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 14.042797 min 2018-09-08T09:07:07.774Z,1536397627.774 [DataOverHttps](IMPORTANT): SBD MTMSN=20180908T090657 2018-09-08T09:07:21.147Z,1536397641.147 [CommandLine](IMPORTANT): got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 8 hour;set profile_station.NeedCommsTime 15 minute;set profile_station.Lat 36.983 degree;set profile_station.Lon -122.52 degree" 48jzf 1 2.000000 2018-09-08T09:07:21.147Z,1536397641.147 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=48jzf 2018-09-08T09:07:21.148Z,1536397641.148 [CommandLine](IMPORTANT): Scheduled #3 (#1 of 2 with id='48jzf'): "load Science/profile_station.xml;set profile_station.MissionTimeout 8 hour;set profile_station.NeedCommsTime 15 minute;set profile_station.Lat 36.983 degree;set profile_station.Lon -122.52 degree" ASAP 2018-09-08T09:07:24.245Z,1536397644.245 [DataOverHttps](IMPORTANT): SBD MTMSN=20180908T090713 2018-09-08T09:07:33.964Z,1536397653.964 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.YoYoMaxDepth 50 meter;run " 48jzf 2 2.000000 2018-09-08T09:07:33.964Z,1536397653.964 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=48jzf 2018-09-08T09:07:33.965Z,1536397653.965 [CommandLine](IMPORTANT): Scheduled #4 (#2 of 2 with id='48jzf'): "set profile_station.YoYoMaxDepth 50 meter;run " ASAP 2018-09-08T09:07:34.083Z,1536397654.083 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml 2018-09-08T09:07:35.713Z,1536397655.713 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml 2018-09-08T09:07:45.502Z,1536397665.502 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 8.000000 hour 2018-09-08T09:07:45.535Z,1536397665.535 [CommandLine](IMPORTANT): got command set profile_station.NeedCommsTime 15.000000 minute 2018-09-08T09:07:45.536Z,1536397665.536 [CommandLine](IMPORTANT): got command set profile_station.Lat 36.983002 degree 2018-09-08T09:07:45.537Z,1536397665.537 [CommandLine](IMPORTANT): got command set profile_station.Lon -122.519997 degree 2018-09-08T09:07:48.295Z,1536397668.295 [CommandLine](IMPORTANT): got command set profile_station.YoYoMaxDepth 50.000000 meter 2018-09-08T09:07:48.295Z,1536397668.295 [CommandLine](IMPORTANT): got command run 2018-09-08T09:07:48.298Z,1536397668.298 [CommandLine](IMPORTANT): Running 2018-09-08T09:07:48.400Z,1536397668.400 [MissionManager](IMPORTANT): Started mission profile_station 2018-09-08T09:07:49.542Z,1536397669.542 [ThrusterServo](FAULT): getVelocity uart error serial timeout 2018-09-08T09:07:49.542Z,1536397669.542 [ThrusterServo](FAULT): Thruster uart error: serial timeout 2018-09-08T09:09:44.671Z,1536397784.671 [DataOverHttps](IMPORTANT): SBD MTMSN=20180908T090933 2018-09-08T09:10:08.589Z,1536397808.589 [CommandLine](IMPORTANT): got command maintain sensor NAL9602.latitude_fix 37.006737 degree 2018-09-08T09:10:08.602Z,1536397808.602 [CommandLine](IMPORTANT): got command maintain sensor NAL9602.longitude_fix -122.528191 degree 2018-09-08T09:10:09.157Z,1536397809.157 [DataOverHttps](IMPORTANT): SBD MTMSN=20180908T090958 2018-09-08T09:10:28.063Z,1536397828.063 [CommandLine](IMPORTANT): got command maintain clear 2018-09-08T09:14:50.686Z,1536398090.686 [profile_station:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-08T09:36:17.913Z,1536399377.913 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=48860, MT Status=1, MTMSN=1515 2018-09-08T09:36:20.609Z,1536399380.609 [CommandLine](IMPORTANT): got command set profile_station.NeedCommsTime 45.000000 minute 2018-09-08T09:42:04.365Z,1536399724.365 [profile_station:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-08T11:19:03.972Z,1536405543.972 [profile_station:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-08T12:11:55.176Z,1536408715.176 [profile_station:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-08T12:18:27.349Z,1536409107.349 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-08T12:25:25.845Z,1536409525.845 [profile_station:NeedComms:E:A_Timeout:A](IMPORTANT): second GPS update timeout 2018-09-08T12:29:11.394Z,1536409751.394 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-08T12:29:27.432Z,1536409767.432 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 7 sticks. 2018-09-08T12:32:26.976Z,1536409946.976 [profile_station:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-08T13:04:10.982Z,1536411850.982 [profile_station:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-08T13:07:24.082Z,1536412044.082 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-08T13:12:22.935Z,1536412342.935 [profile_station:NeedComms:E:A_Timeout:A](IMPORTANT): second GPS update timeout 2018-09-08T13:39:43.895Z,1536413983.895 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=48926, MT Status=1, MTMSN=1516 2018-09-08T13:39:44.659Z,1536413984.659 [CommandLine](IMPORTANT): got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 8 hour;set profile_station.NeedCommsTime 15 minute;set profile_station.Lat 36.983 degree;set profile_station.Lon -122.48 degree" 48wkn 1 2.000000 2018-09-08T13:39:44.659Z,1536413984.659 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=48wkn 2018-09-08T13:39:44.660Z,1536413984.660 [CommandLine](IMPORTANT): Scheduled #5 (#1 of 2 with id='48wkn'): "load Science/profile_station.xml;set profile_station.MissionTimeout 8 hour;set profile_station.NeedCommsTime 15 minute;set profile_station.Lat 36.983 degree;set profile_station.Lon -122.48 degree" ASAP 2018-09-08T13:47:21.347Z,1536414441.347 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=48927, MT Status=1, MTMSN=1517 2018-09-08T13:47:21.948Z,1536414441.948 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.YoYoMaxDepth 50 meter;run " 48wkn 2 2.000000 2018-09-08T13:47:21.948Z,1536414441.948 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=48wkn 2018-09-08T13:47:21.949Z,1536414441.949 [CommandLine](IMPORTANT): Scheduled #6 (#2 of 2 with id='48wkn'): "set profile_station.YoYoMaxDepth 50 meter;run " ASAP 2018-09-08T13:47:22.041Z,1536414442.041 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml 2018-09-08T13:47:22.627Z,1536414442.627 [WetLabsBB2FL](FAULT): LCB fault: Software Overcurrent. 2018-09-08T13:47:22.874Z,1536414442.874 [CTD_Seabird](FAULT): LCB fault: Software Overcurrent. 2018-09-08T13:47:23.890Z,1536414443.890 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml 2018-09-08T13:47:24.207Z,1536414444.207 [MissionManager](IMPORTANT): Started mission Default 2018-09-08T13:47:33.980Z,1536414453.980 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 8.000000 hour 2018-09-08T13:47:33.981Z,1536414453.981 [CommandLine](IMPORTANT): got command set profile_station.NeedCommsTime 15.000000 minute 2018-09-08T13:47:33.981Z,1536414453.981 [CommandLine](IMPORTANT): got command set profile_station.Lat 36.983002 degree 2018-09-08T13:47:33.982Z,1536414453.982 [CommandLine](IMPORTANT): got command set profile_station.Lon -122.480003 degree 2018-09-08T13:47:36.775Z,1536414456.775 [CommandLine](IMPORTANT): got command set profile_station.YoYoMaxDepth 50.000000 meter 2018-09-08T13:47:36.776Z,1536414456.776 [CommandLine](IMPORTANT): got command run 2018-09-08T13:47:36.792Z,1536414456.792 [CommandLine](IMPORTANT): Running 2018-09-08T13:47:37.007Z,1536414457.007 [MissionManager](IMPORTANT): Started mission profile_station 2018-09-08T13:47:59.860Z,1536414479.860 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=48928, MT Status=1, MTMSN=1518 2018-09-08T13:48:00.596Z,1536414480.596 [CommandLine](IMPORTANT): got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 8 hour;set profile_station.NeedCommsTime 15 minute;set profile_station.Lat 36.992 degree;set profile_station.Lon -122.48 degree" 48wxe 1 2.000000 2018-09-08T13:48:00.596Z,1536414480.596 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=48wxe 2018-09-08T13:48:00.597Z,1536414480.597 [CommandLine](IMPORTANT): Scheduled #7 (#1 of 2 with id='48wxe'): "load Science/profile_station.xml;set profile_station.MissionTimeout 8 hour;set profile_station.NeedCommsTime 15 minute;set profile_station.Lat 36.992 degree;set profile_station.Lon -122.48 degree" ASAP 2018-09-08T13:48:20.853Z,1536414500.853 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=48929, MT Status=1, MTMSN=1519 2018-09-08T13:48:21.420Z,1536414501.420 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.YoYoMaxDepth 50 meter;run " 48wxe 2 2.000000 2018-09-08T13:48:21.421Z,1536414501.421 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=48wxe 2018-09-08T13:48:21.421Z,1536414501.421 [CommandLine](IMPORTANT): Scheduled #8 (#2 of 2 with id='48wxe'): "set profile_station.YoYoMaxDepth 50 meter;run " ASAP 2018-09-08T13:48:21.572Z,1536414501.572 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml 2018-09-08T13:48:23.362Z,1536414503.362 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml 2018-09-08T13:48:23.721Z,1536414503.721 [MissionManager](IMPORTANT): Started mission Default 2018-09-08T13:48:32.901Z,1536414512.901 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 8.000000 hour 2018-09-08T13:48:32.901Z,1536414512.901 [CommandLine](IMPORTANT): got command set profile_station.NeedCommsTime 15.000000 minute 2018-09-08T13:48:32.903Z,1536414512.903 [CommandLine](IMPORTANT): got command set profile_station.Lat 36.992001 degree 2018-09-08T13:48:32.903Z,1536414512.903 [CommandLine](IMPORTANT): got command set profile_station.Lon -122.480003 degree 2018-09-08T13:48:35.806Z,1536414515.806 [CommandLine](IMPORTANT): got command set profile_station.YoYoMaxDepth 50.000000 meter 2018-09-08T13:48:35.807Z,1536414515.807 [CommandLine](IMPORTANT): got command run 2018-09-08T13:48:35.809Z,1536414515.809 [CommandLine](IMPORTANT): Running 2018-09-08T13:48:36.104Z,1536414516.104 [MissionManager](IMPORTANT): Started mission profile_station 2018-09-08T14:45:14.874Z,1536417914.874 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-08T14:45:25.646Z,1536417925.646 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.005994 CHAN A1 (24V): -0.026646 CHAN A2 (12V): -0.004396 CHAN A3 (5V): -0.002881 CHAN B0 (3.3V): -0.001472 CHAN B1 (3.15aV): -0.001373 CHAN B2 (3.15bV): -0.001185 CHAN B3 (GND): -0.000592 OPEN: 0.004265 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-08T15:05:43.055Z,1536419143.055 [profile_station:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-08T15:08:56.300Z,1536419336.300 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-08T15:14:31.456Z,1536419671.456 [profile_station:NeedComms:E:A_Timeout:A](IMPORTANT): second GPS update timeout 2018-09-08T15:42:41.610Z,1536421361.610 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=48966, MT Status=1, MTMSN=1520 2018-09-08T15:42:42.099Z,1536421362.099 [CommandLine](IMPORTANT): got command stop 2018-09-08T15:42:42.108Z,1536421362.108 [CommandLine](IMPORTANT): Scheduling is paused 2018-09-08T15:42:42.497Z,1536421362.497 [MissionManager](IMPORTANT): Started mission Default 2018-09-08T15:56:10.033Z,1536422170.033 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 13.452174 min 2018-09-08T15:56:48.386Z,1536422208.386 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=48975, MT Status=1, MTMSN=1521 2018-09-08T15:56:49.156Z,1536422209.156 [CommandLine](IMPORTANT): got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 8 hour;set profile_station.NeedCommsTime 15 minute;set profile_station.Lat 36.993 degree;set profile_station.Lon -122.48464516 degree" 492sk 1 2.000000 2018-09-08T15:56:49.156Z,1536422209.156 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=492sk 2018-09-08T15:56:49.157Z,1536422209.157 [CommandLine](IMPORTANT): Scheduled #9 (#1 of 2 with id='492sk'): "load Science/profile_station.xml;set profile_station.MissionTimeout 8 hour;set profile_station.NeedCommsTime 15 minute;set profile_station.Lat 36.993 degree;set profile_station.Lon -122.48464516 degree" ASAP 2018-09-08T16:00:20.370Z,1536422420.370 [DataOverHttps](IMPORTANT): SBD MTMSN=20180908T160009 2018-09-08T16:00:24.823Z,1536422424.823 [CommandLine](IMPORTANT): got command stop 2018-09-08T16:07:12.253Z,1536422832.253 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 24.489329 min 2018-09-08T16:07:25.017Z,1536422845.017 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-08T16:09:30.226Z,1536422970.226 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=48976, MT Status=1, MTMSN=1522 2018-09-08T16:09:30.851Z,1536422970.851 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.YoYoMaxDepth 50 meter;run " 492sk 2 2.000000 2018-09-08T16:09:30.852Z,1536422970.852 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=492sk 2018-09-08T16:09:30.853Z,1536422970.853 [CommandLine](IMPORTANT): Scheduled #10 (#2 of 2 with id='492sk'): "set profile_station.YoYoMaxDepth 50 meter;run " ASAP 2018-09-08T16:09:31.082Z,1536422971.082 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml 2018-09-08T16:09:32.459Z,1536422972.459 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml 2018-09-08T16:09:41.746Z,1536422981.746 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 8.000000 hour 2018-09-08T16:09:41.748Z,1536422981.748 [CommandLine](IMPORTANT): got command set profile_station.NeedCommsTime 15.000000 minute 2018-09-08T16:09:41.749Z,1536422981.749 [CommandLine](IMPORTANT): got command set profile_station.Lat 36.993000 degree 2018-09-08T16:09:41.749Z,1536422981.749 [CommandLine](IMPORTANT): got command set profile_station.Lon -122.484642 degree 2018-09-08T16:09:44.540Z,1536422984.540 [CommandLine](IMPORTANT): got command set profile_station.YoYoMaxDepth 50.000000 meter 2018-09-08T16:09:44.540Z,1536422984.540 [CommandLine](IMPORTANT): got command run 2018-09-08T16:09:44.544Z,1536422984.544 [CommandLine](IMPORTANT): Running 2018-09-08T16:09:44.674Z,1536422984.674 [MissionManager](IMPORTANT): Started mission profile_station 2018-09-08T16:14:22.635Z,1536423262.635 [DataOverHttps](IMPORTANT): SBD MTMSN=20180908T161411 2018-09-08T16:14:28.536Z,1536423268.536 [CommandLine](IMPORTANT): got command load ./Missions/Science/isotherm_depth_sampling_modified.xml 2018-09-08T16:14:46.635Z,1536423286.635 [CommandLine](IMPORTANT): Loaded ./Missions/Science/isotherm_depth_sampling_modified.xml 2018-09-08T16:14:46.919Z,1536423286.919 [MissionManager](IMPORTANT): Started mission Default 2018-09-08T16:15:32.453Z,1536423332.453 [DataOverHttps](IMPORTANT): SBD MTMSN=20180908T161521 2018-09-08T16:15:44.992Z,1536423344.992 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsothermOrDepth.MaxDepth 80.000000 meter 2018-09-08T16:16:39.907Z,1536423399.907 [DataOverHttps](IMPORTANT): SBD MTMSN=20180908T161628 2018-09-08T16:16:49.606Z,1536423409.606 [CommandLine](IMPORTANT): got command run 2018-09-08T16:16:49.640Z,1536423409.640 [CommandLine](IMPORTANT): Running 2018-09-08T16:16:49.998Z,1536423409.998 [MissionManager](IMPORTANT): Started mission DriftOrDonutAtIsothermOrDepth 2018-09-08T16:16:50.183Z,1536423410.183 [DriftOrDonutAtIsothermOrDepth:AbortDrift:B.AbortDrift](IMPORTANT): Acoustic timeout set to: 2.00 hours. 2018-09-08T16:18:07.481Z,1536423487.481 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-08T16:20:51.984Z,1536423651.984 [CommandLine](IMPORTANT): got command show stack 2018-09-08T16:20:51.984Z,1536423651.984 [CommandLine](IMPORTANT): Behavior Stack: 2018-09-08T16:20:51.986Z,1536423651.986 [DriftOrDonutAtIsothermOrDepth:StandardEnvelopes](IMPORTANT): Priority 0: DriftOrDonutAtIsothermOrDepth:StandardEnvelopes:A.AltitudeEnvelope 2018-09-08T16:20:51.986Z,1536423651.986 [DriftOrDonutAtIsothermOrDepth:StandardEnvelopes](IMPORTANT): Priority 1: DriftOrDonutAtIsothermOrDepth:StandardEnvelopes:B.DepthEnvelope 2018-09-08T16:20:51.986Z,1536423651.986 [DriftOrDonutAtIsothermOrDepth:StandardEnvelopes](IMPORTANT): Priority 2: DriftOrDonutAtIsothermOrDepth:StandardEnvelopes:C.OffshoreEnvelope 2018-09-08T16:20:51.987Z,1536423651.987 [DriftOrDonutAtIsothermOrDepth:AbortDrift](IMPORTANT): Priority 3: DriftOrDonutAtIsothermOrDepth:AbortDrift:B.AbortDrift 2018-09-08T16:20:51.987Z,1536423651.987 [DriftOrDonutAtIsothermOrDepth:NeedComms](IMPORTANT): Priority 4: DriftOrDonutAtIsothermOrDepth:NeedComms:B.GoToSurface 2018-09-08T16:20:51.987Z,1536423651.987 [DriftOrDonutAtIsothermOrDepth:NeedComms](IMPORTANT): Priority 5: DriftOrDonutAtIsothermOrDepth:NeedComms:C 2018-09-08T16:20:51.988Z,1536423651.988 [DriftOrDonutAtIsothermOrDepth](IMPORTANT): Priority 6: DriftOrDonutAtIsothermOrDepth:H.Pitch 2018-09-08T16:20:51.989Z,1536423651.989 [DriftOrDonutAtIsothermOrDepth:Science](IMPORTANT): Priority 7: DriftOrDonutAtIsothermOrDepth:Science:C 2018-09-08T16:20:51.989Z,1536423651.989 [DriftOrDonutAtIsothermOrDepth:Science](IMPORTANT): Priority 8: DriftOrDonutAtIsothermOrDepth:Science:D 2018-09-08T16:20:51.989Z,1536423651.989 [DriftOrDonutAtIsothermOrDepth:Science](IMPORTANT): Priority 9: DriftOrDonutAtIsothermOrDepth:Science:G 2018-09-08T16:20:51.991Z,1536423651.991 [DriftOrDonutAtIsothermOrDepth:Science:PeakDetectChl](IMPORTANT): Priority 10: DriftOrDonutAtIsothermOrDepth:Science:PeakDetectChl:A.PeakDetectVsDepth 2018-09-08T16:20:51.991Z,1536423651.991 [DriftOrDonutAtIsothermOrDepth:Science:HighestChlPeakReport](IMPORTANT): Priority 11: DriftOrDonutAtIsothermOrDepth:Science:HighestChlPeakReport:A.PeakDetectHorizontal 2018-09-08T16:20:51.991Z,1536423651.991 [DriftOrDonutAtIsothermOrDepth](IMPORTANT): Priority 12: DriftOrDonutAtIsothermOrDepth:J.AltitudeEnvelope 2018-09-08T16:23:51.894Z,1536423831.894 [DriftOrDonutAtIsothermOrDepth:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-08T16:28:51.155Z,1536424131.155 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-08T16:32:04.451Z,1536424324.451 [DriftOrDonutAtIsothermOrDepth:NeedComms:E:A_Timeout:A](IMPORTANT): second GPS update timeout 2018-09-09T00:27:55.682Z,1536452875.682 [ESPComponent](CRITICAL): [sample #4] ESP sampling sequence terminated with error: Unexpected ESP state ES_PROCESS_FAILED. Expecting one of: ES_PROCESSED, ES_PROCESSING 2018-09-08T16:34:10.123Z,1536424450.123 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 1.000000 count . Target temp = 12.000000 degC . 2018-09-08T16:34:11.318Z,1536424451.318 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-08T16:36:04.987Z,1536424564.987 [Radio_Surface](FAULT): LCB fault: LCB Watchdog Reset. 2018-09-08T17:34:14.125Z,1536428054.125 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 35.137096 m , 11.957513 degC , 0.144300 ug/l . 2018-09-08T17:34:15.220Z,1536428055.220 [ESPComponent](IMPORTANT): Setting regex for ESP Log summary: 'Selecting Cartridge|Sampled|Error|Fail|Retry|Cmd::|Sampler::' 2018-09-08T17:34:15.633Z,1536428055.633 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-08T17:34:15.638Z,1536428055.638 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-08T17:34:15.700Z,1536428055.700 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-08T17:34:16.031Z,1536428056.031 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-08T17:34:46.627Z,1536428086.627 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-08T17:34:47.531Z,1536428087.531 [ESPComponent](IMPORTANT): [sample #1] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-08T17:34:47.928Z,1536428087.928 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-08T17:34:48.628Z,1536428088.628 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-08T17:34:49.028Z,1536428089.028 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-08T17:34:50.628Z,1536428090.628 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-08T17:35:23.428Z,1536428123.428 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_FILTERING 2018-09-08T17:35:25.828Z,1536428125.828 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-08T18:24:09.428Z,1536431049.428 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_PROCESSING 2018-09-08T18:24:11.827Z,1536431051.827 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-08T18:35:35.028Z,1536431735.028 [ESPComponent](IMPORTANT): [sample #1] ESP sampling state: S_STOPPING 2018-09-08T18:36:00.228Z,1536431760.228 [ESPComponent](IMPORTANT): [sample #1] ESP sampling sequence completed normally. 2018-09-08T18:36:00.628Z,1536431760.628 [ESPComponent](IMPORTANT): [sample #1] ESP log summary report (1 messages): @10:34:49.28 Selecting Cartridge 57 2018-09-08T18:36:01.506Z,1536431761.506 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 1.000000 count completed. 2018-09-08T18:36:07.508Z,1536431767.508 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 2.000000 count . Target temp = 12.000000 degC . 2018-09-08T18:36:08.711Z,1536431768.711 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-08T19:36:11.516Z,1536435371.516 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 38.016266 m , 12.122095 degC , 0.177600 ug/l . 2018-09-08T19:36:13.101Z,1536435373.101 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-08T19:36:13.102Z,1536435373.102 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-08T19:36:13.123Z,1536435373.123 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-08T19:36:13.328Z,1536435373.328 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-08T19:36:43.498Z,1536435403.498 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-08T19:36:44.310Z,1536435404.310 [ESPComponent](IMPORTANT): [sample #2] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-08T19:36:44.809Z,1536435404.809 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-08T19:36:45.095Z,1536435405.095 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-08T19:36:45.496Z,1536435405.496 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-08T19:36:47.496Z,1536435407.496 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-08T19:37:20.296Z,1536435440.296 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_FILTERING 2018-09-08T19:37:22.696Z,1536435442.696 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-08T19:40:47.942Z,1536435647.942 [DAT](FAULT): unknown deviceResponse_: 11:28:37.8491 , LVL= 32752, 32753, 15314, 32755, P9,-1.074, 0.980, RAW= 201.8, 9.0 2018-09-08T19:40:51.567Z,1536435651.567 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-08T20:25:03.896Z,1536438303.896 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_PROCESSING 2018-09-08T20:25:06.296Z,1536438306.296 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-08T20:36:29.496Z,1536438989.496 [ESPComponent](IMPORTANT): [sample #2] ESP sampling state: S_STOPPING 2018-09-08T20:36:54.696Z,1536439014.696 [ESPComponent](IMPORTANT): [sample #2] ESP sampling sequence completed normally. 2018-09-08T20:36:55.097Z,1536439015.097 [ESPComponent](IMPORTANT): [sample #2] ESP log summary report (2 messages): @12:36:46.20 Selecting Cartridge 56 @13:24:48.34 Sampled 1000.0ml 2018-09-08T20:36:55.988Z,1536439015.988 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 2.000000 count completed. 2018-09-08T20:37:02.008Z,1536439022.008 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 3.000000 count . Target temp = 12.000000 degC . 2018-09-08T20:37:03.210Z,1536439023.210 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-08T20:45:26.039Z,1536439526.039 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-08T20:45:36.864Z,1536439536.864 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.121924 CHAN A1 (24V): -0.026824 CHAN A2 (12V): -0.004670 CHAN A3 (5V): -0.002557 CHAN B0 (3.3V): -0.001373 CHAN B1 (3.15aV): -0.001103 CHAN B2 (3.15bV): -0.001064 CHAN B3 (GND): -0.000615 OPEN: 0.004632 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-08T21:37:05.971Z,1536442625.971 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 34.613247 m , 11.941095 degC , 0.210900 ug/l . 2018-09-08T21:37:07.569Z,1536442627.569 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-08T21:37:07.570Z,1536442627.570 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-08T21:37:07.587Z,1536442627.587 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-08T21:37:07.761Z,1536442627.761 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-08T21:37:37.991Z,1536442657.991 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-08T21:37:38.797Z,1536442658.797 [ESPComponent](IMPORTANT): [sample #3] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-08T21:37:39.284Z,1536442659.284 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-08T21:37:39.592Z,1536442659.592 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-08T21:37:39.991Z,1536442659.991 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-08T21:37:41.991Z,1536442661.991 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-08T21:38:14.794Z,1536442694.794 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_FILTERING 2018-09-08T21:38:17.191Z,1536442697.191 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-08T22:26:07.194Z,1536445567.194 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_PROCESSING 2018-09-08T22:26:09.595Z,1536445569.595 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-08T22:37:32.794Z,1536446252.794 [ESPComponent](IMPORTANT): [sample #3] ESP sampling state: S_STOPPING 2018-09-08T22:37:57.992Z,1536446277.992 [ESPComponent](IMPORTANT): [sample #3] ESP sampling sequence completed normally. 2018-09-08T22:37:58.394Z,1536446278.394 [ESPComponent](IMPORTANT): [sample #3] ESP log summary report (2 messages): @14:37:40.63 Selecting Cartridge 55 @15:25:51.55 Sampled 1000.1ml 2018-09-08T22:37:59.292Z,1536446279.292 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 3.000000 count completed. 2018-09-08T22:38:05.288Z,1536446285.288 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 4.000000 count . Target temp = 12.000000 degC . 2018-09-08T22:38:06.479Z,1536446286.479 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-08T23:38:09.283Z,1536449889.283 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 43.446968 m , 11.884790 degC , 0.122100 ug/l . 2018-09-08T23:38:10.873Z,1536449890.873 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-08T23:38:10.874Z,1536449890.874 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-08T23:38:10.964Z,1536449890.964 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-08T23:38:11.041Z,1536449891.041 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-08T23:38:41.679Z,1536449921.679 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-08T23:38:42.483Z,1536449922.483 [ESPComponent](IMPORTANT): [sample #4] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-08T23:38:42.972Z,1536449922.972 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-08T23:38:43.280Z,1536449923.280 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-08T23:38:43.680Z,1536449923.680 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-08T23:38:45.680Z,1536449925.680 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-08T23:39:18.480Z,1536449958.480 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_FILTERING 2018-09-08T23:39:20.880Z,1536449960.880 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-09T00:27:34.880Z,1536452854.880 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_PROCESSING 2018-09-09T00:27:38.084Z,1536452858.084 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-09T00:27:53.680Z,1536452873.680 [ESPComponent](IMPORTANT): [sample #4] ESP sampling state: S_STOPPING 2018-09-09T00:27:55.863Z,1536452875.863 [CommandLine](FAULT): Scheduling is paused 2018-09-09T00:27:56.084Z,1536452876.084 [ESPComponent](IMPORTANT): [sample #4] ESP log summary report (3 messages): @16:38:44.32 Selecting Cartridge 54 @17:27:19.43 Sampled 1000.0ml @17:27:41.45 Slide::Error in PROCESSING -- Archive Syringe positionErr at 54ul (actually 72ul) 2018-09-09T00:27:57.389Z,1536452877.389 [MissionManager](IMPORTANT): Started mission Default 2018-09-09T00:27:58.482Z,1536452878.482 [ESPComponent](IMPORTANT): [sample #4] No ESP summary messages. 2018-09-09T00:38:18.142Z,1536453498.142 [DAT](FAULT): unknown deviceResponse_: 0.4 2018-09-09T00:38:21.702Z,1536453501.702 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-09T00:55:39.034Z,1536454539.034 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 27.687789 min 2018-09-09T00:55:51.797Z,1536454551.797 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-09T01:07:23.143Z,1536455243.143 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 39.422375 min 2018-09-09T01:07:35.888Z,1536455255.888 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-09T01:09:23.166Z,1536455363.166 [DataOverHttps](IMPORTANT): SBD MTMSN=20180909T010912 2018-09-09T01:09:28.123Z,1536455368.123 [CommandLine](IMPORTANT): got command load ./Missions/Science/isotherm_depth_sampling_modified.xml 2018-09-09T01:09:36.958Z,1536455376.958 [CommandLine](IMPORTANT): Loaded ./Missions/Science/isotherm_depth_sampling_modified.xml 2018-09-09T01:09:41.653Z,1536455381.653 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsothermOrDepth.MaxDepth 80.000000 meter 2018-09-09T01:09:41.653Z,1536455381.653 [CommandLine](IMPORTANT): got command run 2018-09-09T01:09:41.656Z,1536455381.656 [CommandLine](IMPORTANT): Running 2018-09-09T01:09:41.770Z,1536455381.770 [MissionManager](IMPORTANT): Started mission DriftOrDonutAtIsothermOrDepth 2018-09-09T01:09:41.881Z,1536455381.881 [DriftOrDonutAtIsothermOrDepth:AbortDrift:B.AbortDrift](IMPORTANT): Acoustic timeout set to: 2.00 hours. 2018-09-09T01:12:00.732Z,1536455520.732 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 7 sticks. 2018-09-09T01:16:42.177Z,1536455802.177 [DriftOrDonutAtIsothermOrDepth:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-09-09T01:19:37.195Z,1536455977.195 [DAT](FAULT): unknown deviceResponse_: +00.0 2018-09-09T01:19:40.827Z,1536455980.827 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-09T01:21:51.336Z,1536456111.336 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-09-11T23:28:40.846Z,1536708520.846 [ESPComponent](CRITICAL): [sample #38] ESP sampling sequence terminated with error: Unexpected ESP state ES_PROCESS_FAILED. Expecting one of: ES_PROCESSED, ES_PROCESSING 2018-09-09T01:31:43.460Z,1536456703.460 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 1.000000 count . Target temp = 12.000000 degC . 2018-09-09T01:31:44.671Z,1536456704.671 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-09T02:31:47.047Z,1536460307.047 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 34.077919 m , 11.930414 degC , 0.077700 ug/l . 2018-09-09T02:31:48.558Z,1536460308.558 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-09T02:31:48.559Z,1536460308.559 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-09T02:31:48.591Z,1536460308.591 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-09T02:31:48.740Z,1536460308.740 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-09T02:32:18.975Z,1536460338.975 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-09T02:32:19.779Z,1536460339.779 [ESPComponent](IMPORTANT): [sample #5] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-09T02:32:20.267Z,1536460340.267 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-09T02:32:20.575Z,1536460340.575 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-09T02:32:20.976Z,1536460340.976 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-09T02:32:22.976Z,1536460342.976 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-09T02:32:55.776Z,1536460375.776 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_FILTERING 2018-09-09T02:32:58.176Z,1536460378.176 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-09T02:45:37.153Z,1536461137.153 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-09T02:45:48.325Z,1536461148.325 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.121609 CHAN A1 (24V): -0.026523 CHAN A2 (12V): -0.004475 CHAN A3 (5V): -0.003137 CHAN B0 (3.3V): -0.000720 CHAN B1 (3.15aV): -0.000869 CHAN B2 (3.15bV): -0.001013 CHAN B3 (GND): -0.000797 OPEN: 0.004721 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-09T03:21:15.376Z,1536463275.376 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_PROCESSING 2018-09-09T03:21:17.776Z,1536463277.776 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-09T03:32:40.977Z,1536463960.977 [ESPComponent](IMPORTANT): [sample #5] ESP sampling state: S_STOPPING 2018-09-09T03:33:06.176Z,1536463986.176 [ESPComponent](IMPORTANT): [sample #5] ESP sampling sequence completed normally. 2018-09-09T03:33:06.575Z,1536463986.575 [ESPComponent](IMPORTANT): [sample #5] ESP log summary report (2 messages): @19:32:24.55 Selecting Cartridge 53 @20:20:59.75 Sampled 1000.0ml 2018-09-09T03:33:07.455Z,1536463987.455 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 1.000000 count completed. 2018-09-09T03:33:13.460Z,1536463993.460 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 2.000000 count . Target temp = 12.000000 degC . 2018-09-09T03:33:14.647Z,1536463994.647 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-09T04:33:17.082Z,1536467597.082 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 28.364662 m , 11.962610 degC , 0.288600 ug/l . 2018-09-09T04:33:18.579Z,1536467598.579 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-09T04:33:18.579Z,1536467598.579 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-09T04:33:18.614Z,1536467598.614 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-09T04:33:18.784Z,1536467598.784 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-09T04:33:49.095Z,1536467629.095 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-09T04:33:49.898Z,1536467629.898 [ESPComponent](IMPORTANT): [sample #6] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-09T04:33:50.388Z,1536467630.388 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-09T04:33:50.695Z,1536467630.695 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-09T04:33:51.096Z,1536467631.096 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-09T04:33:53.095Z,1536467633.095 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-09T04:34:25.896Z,1536467665.896 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_FILTERING 2018-09-09T04:34:28.296Z,1536467668.296 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-09T05:22:18.296Z,1536470538.296 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_PROCESSING 2018-09-09T05:22:20.695Z,1536470540.695 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-09T05:33:43.895Z,1536471223.895 [ESPComponent](IMPORTANT): [sample #6] ESP sampling state: S_STOPPING 2018-09-09T05:34:09.096Z,1536471249.096 [ESPComponent](IMPORTANT): [sample #6] ESP sampling sequence completed normally. 2018-09-09T05:34:09.496Z,1536471249.496 [ESPComponent](IMPORTANT): [sample #6] ESP log summary report (2 messages): @21:33:51.94 Selecting Cartridge 52 @22:22:02.94 Sampled 1000.0ml 2018-09-09T05:34:10.397Z,1536471250.397 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 2.000000 count completed. 2018-09-09T05:34:16.388Z,1536471256.388 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 3.000000 count . Target temp = 12.000000 degC . 2018-09-09T05:34:17.594Z,1536471257.594 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-09T06:34:20.407Z,1536474860.407 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 29.020737 m , 12.069910 degC , 0.088800 ug/l . 2018-09-09T06:34:21.900Z,1536474861.900 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-09T06:34:21.901Z,1536474861.901 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-09T06:34:21.967Z,1536474861.967 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-09T06:34:22.115Z,1536474862.115 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-09T06:34:52.375Z,1536474892.375 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-09T06:34:53.178Z,1536474893.178 [ESPComponent](IMPORTANT): [sample #7] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-09T06:34:53.662Z,1536474893.662 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-09T06:34:53.976Z,1536474893.976 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-09T06:34:54.376Z,1536474894.376 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-09T06:34:56.376Z,1536474896.376 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-09T06:35:29.176Z,1536474929.176 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_FILTERING 2018-09-09T06:35:31.575Z,1536474931.575 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-09T07:05:28.791Z,1536476728.791 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-09T07:05:30.528Z,1536476730.528 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-09T07:28:37.216Z,1536478117.216 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_PROCESSING 2018-09-09T07:28:39.616Z,1536478119.616 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-09T07:40:02.816Z,1536478802.816 [ESPComponent](IMPORTANT): [sample #7] ESP sampling state: S_STOPPING 2018-09-09T07:40:28.018Z,1536478828.018 [ESPComponent](IMPORTANT): [sample #7] ESP sampling sequence completed normally. 2018-09-09T07:40:28.416Z,1536478828.416 [ESPComponent](IMPORTANT): [sample #7] ESP log summary report (1 messages): @23:34:55.01 Selecting Cartridge 51 2018-09-09T07:40:29.297Z,1536478829.297 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 3.000000 count completed. 2018-09-09T07:40:35.321Z,1536478835.321 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 4.000000 count . Target temp = 12.000000 degC . 2018-09-09T07:40:36.525Z,1536478836.525 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-09T07:58:19.642Z,1536479899.642 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-09T07:58:21.395Z,1536479901.395 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-09T08:40:38.961Z,1536482438.961 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 31.976036 m , 12.150995 degC , 0.144300 ug/l . 2018-09-09T08:40:40.464Z,1536482440.464 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-09T08:40:40.465Z,1536482440.465 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-09T08:40:40.551Z,1536482440.551 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-09T08:40:40.633Z,1536482440.633 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-09T08:41:11.275Z,1536482471.275 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-09T08:41:12.079Z,1536482472.079 [ESPComponent](IMPORTANT): [sample #8] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-09T08:41:12.555Z,1536482472.555 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-09T08:41:12.879Z,1536482472.879 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-09T08:41:13.278Z,1536482473.278 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-09T08:41:15.275Z,1536482475.275 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-09T08:41:48.076Z,1536482508.076 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_FILTERING 2018-09-09T08:41:50.475Z,1536482510.475 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-09T08:45:48.610Z,1536482748.610 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-09T08:45:59.402Z,1536482759.402 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.122309 CHAN A1 (24V): -0.026846 CHAN A2 (12V): -0.004879 CHAN A3 (5V): -0.002752 CHAN B0 (3.3V): -0.001604 CHAN B1 (3.15aV): -0.001309 CHAN B2 (3.15bV): -0.001464 CHAN B3 (GND): -0.000330 OPEN: 0.004840 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-09T09:24:12.130Z,1536485052.130 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks. 2018-09-09T09:32:57.676Z,1536485577.676 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_PROCESSING 2018-09-09T09:33:00.076Z,1536485580.076 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-09T09:44:23.275Z,1536486263.275 [ESPComponent](IMPORTANT): [sample #8] ESP sampling state: S_STOPPING 2018-09-09T09:44:48.476Z,1536486288.476 [ESPComponent](IMPORTANT): [sample #8] ESP sampling sequence completed normally. 2018-09-09T09:44:48.880Z,1536486288.880 [ESPComponent](IMPORTANT): [sample #8] ESP log summary report (2 messages): @01:41:13.89 Selecting Cartridge 50 @02:32:42.27 Sampled 1000.0ml 2018-09-09T09:44:49.787Z,1536486289.787 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 4.000000 count completed. 2018-09-09T09:44:55.774Z,1536486295.774 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 5.000000 count . Target temp = 12.000000 degC . 2018-09-09T09:44:56.984Z,1536486296.984 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-09T10:44:59.783Z,1536489899.783 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 48.360107 m , 11.890710 degC , 0.144300 ug/l . 2018-09-09T10:45:01.279Z,1536489901.279 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-09T10:45:01.279Z,1536489901.279 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-09T10:45:01.347Z,1536489901.347 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-09T10:45:01.490Z,1536489901.490 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-09T10:45:31.687Z,1536489931.687 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-09T10:45:32.497Z,1536489932.497 [ESPComponent](IMPORTANT): [sample #9] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-09T10:45:32.996Z,1536489932.996 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-09T10:45:33.288Z,1536489933.288 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-09T10:45:33.688Z,1536489933.688 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-09T10:45:35.687Z,1536489935.687 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-09T10:46:08.488Z,1536489968.488 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_FILTERING 2018-09-09T10:46:10.890Z,1536489970.890 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-09T11:34:42.890Z,1536492882.890 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_PROCESSING 2018-09-09T11:34:45.288Z,1536492885.288 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-09T11:46:08.487Z,1536493568.487 [ESPComponent](IMPORTANT): [sample #9] ESP sampling state: S_STOPPING 2018-09-09T11:46:33.689Z,1536493593.689 [ESPComponent](IMPORTANT): [sample #9] ESP sampling sequence completed normally. 2018-09-09T11:46:34.089Z,1536493594.089 [ESPComponent](IMPORTANT): [sample #9] ESP log summary report (1 messages): @03:45:34.59 Selecting Cartridge 49 2018-09-09T11:46:34.989Z,1536493594.989 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 5.000000 count completed. 2018-09-09T11:46:40.975Z,1536493600.975 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 6.000000 count . Target temp = 12.000000 degC . 2018-09-09T11:46:42.197Z,1536493602.197 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-09T12:46:44.591Z,1536497204.591 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 34.440239 m , 11.966791 degC , 0.177600 ug/l . 2018-09-09T12:46:46.090Z,1536497206.090 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-09T12:46:46.091Z,1536497206.091 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-09T12:46:46.155Z,1536497206.155 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-09T12:46:46.332Z,1536497206.332 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-09T12:47:16.907Z,1536497236.907 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-09T12:47:17.711Z,1536497237.711 [ESPComponent](IMPORTANT): [sample #10] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-09T12:47:18.208Z,1536497238.208 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-09T12:47:18.508Z,1536497238.508 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-09T12:47:18.907Z,1536497238.907 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-09T12:47:20.908Z,1536497240.908 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-09T12:47:53.708Z,1536497273.708 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_FILTERING 2018-09-09T12:47:56.108Z,1536497276.108 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-09T13:36:28.108Z,1536500188.108 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_PROCESSING 2018-09-09T13:36:30.508Z,1536500190.508 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-09T13:47:53.708Z,1536500873.708 [ESPComponent](IMPORTANT): [sample #10] ESP sampling state: S_STOPPING 2018-09-09T13:48:18.912Z,1536500898.912 [ESPComponent](IMPORTANT): [sample #10] ESP sampling sequence completed normally. 2018-09-09T13:48:19.308Z,1536500899.308 [ESPComponent](IMPORTANT): [sample #10] ESP log summary report (1 messages): @05:47:19.73 Selecting Cartridge 48 2018-09-09T13:48:20.198Z,1536500900.198 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 6.000000 count completed. 2018-09-09T13:48:26.202Z,1536500906.202 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 7.000000 count . Target temp = 12.000000 degC . 2018-09-09T13:48:27.417Z,1536500907.417 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-09T14:45:59.461Z,1536504359.461 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-09T14:46:10.238Z,1536504370.238 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.120622 CHAN A1 (24V): -0.026544 CHAN A2 (12V): -0.004454 CHAN A3 (5V): -0.002817 CHAN B0 (3.3V): -0.000617 CHAN B1 (3.15aV): -0.001329 CHAN B2 (3.15bV): -0.001272 CHAN B3 (GND): -0.000447 OPEN: 0.004735 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-09T14:48:29.801Z,1536504509.801 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 29.096783 m , 12.104791 degC , 0.144300 ug/l . 2018-09-09T14:48:31.310Z,1536504511.310 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-09T14:48:31.311Z,1536504511.311 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-09T14:48:31.391Z,1536504511.391 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-09T14:48:31.510Z,1536504511.510 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-09T14:49:01.708Z,1536504541.708 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-09T14:49:02.516Z,1536504542.516 [ESPComponent](IMPORTANT): [sample #11] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-09T14:49:02.999Z,1536504542.999 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-09T14:49:03.307Z,1536504543.307 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-09T14:49:03.708Z,1536504543.708 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-09T14:49:05.708Z,1536504545.708 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-09T14:49:38.508Z,1536504578.508 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_FILTERING 2018-09-09T14:49:40.911Z,1536504580.911 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-09T15:40:32.108Z,1536507632.108 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_PROCESSING 2018-09-09T15:40:34.508Z,1536507634.508 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-09T15:51:57.708Z,1536508317.708 [ESPComponent](IMPORTANT): [sample #11] ESP sampling state: S_STOPPING 2018-09-09T15:52:22.916Z,1536508342.916 [ESPComponent](IMPORTANT): [sample #11] ESP sampling sequence completed normally. 2018-09-09T15:52:23.308Z,1536508343.308 [ESPComponent](IMPORTANT): [sample #11] ESP log summary report (2 messages): @07:49:04.42 Selecting Cartridge 47 @08:40:16.64 Sampled 1000.1ml 2018-09-09T15:52:24.190Z,1536508344.190 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 7.000000 count completed. 2018-09-09T15:52:30.183Z,1536508350.183 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 8.000000 count . Target temp = 12.000000 degC . 2018-09-09T15:52:31.411Z,1536508351.411 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-09T16:52:34.219Z,1536511954.219 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 39.241329 m , 11.922296 degC , 0.155400 ug/l . 2018-09-09T16:52:35.713Z,1536511955.713 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-09T16:52:35.714Z,1536511955.714 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-09T16:52:35.799Z,1536511955.799 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-09T16:52:35.932Z,1536511955.932 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-09T16:53:06.127Z,1536511986.127 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-09T16:53:06.932Z,1536511986.932 [ESPComponent](IMPORTANT): [sample #12] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-09T16:53:07.416Z,1536511987.416 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-09T16:53:07.728Z,1536511987.728 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-09T16:53:08.128Z,1536511988.128 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-09T16:53:10.128Z,1536511990.128 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-09T16:53:42.933Z,1536512022.933 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_FILTERING 2018-09-09T16:53:45.328Z,1536512025.328 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-09T17:42:39.727Z,1536514959.727 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_PROCESSING 2018-09-09T17:42:42.929Z,1536514962.929 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-09T17:54:05.328Z,1536515645.328 [ESPComponent](IMPORTANT): [sample #12] ESP sampling state: S_STOPPING 2018-09-09T17:54:30.528Z,1536515670.528 [ESPComponent](IMPORTANT): [sample #12] ESP sampling sequence completed normally. 2018-09-09T17:54:30.930Z,1536515670.930 [ESPComponent](IMPORTANT): [sample #12] ESP log summary report (2 messages): @09:53:08.66 Selecting Cartridge 46 @10:42:24.06 Sampled 1000.0ml 2018-09-09T17:54:31.799Z,1536515671.799 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 8.000000 count completed. 2018-09-09T17:54:37.806Z,1536515677.806 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 9.000000 count . Target temp = 12.000000 degC . 2018-09-09T17:54:39.038Z,1536515679.038 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-09T18:54:41.430Z,1536519281.430 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 34.103760 m , 11.981897 degC , 0.133200 ug/l . 2018-09-09T18:54:42.933Z,1536519282.933 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-09T18:54:42.936Z,1536519282.936 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-09T18:54:43.007Z,1536519283.007 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-09T18:54:43.179Z,1536519283.179 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-09T18:55:13.815Z,1536519313.815 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-09T18:55:14.621Z,1536519314.621 [ESPComponent](IMPORTANT): [sample #13] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-09T18:55:15.126Z,1536519315.126 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-09T18:55:15.416Z,1536519315.416 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-09T18:55:15.815Z,1536519315.815 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-09T18:55:17.815Z,1536519317.815 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-09T18:55:50.615Z,1536519350.615 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_FILTERING 2018-09-09T18:55:53.015Z,1536519353.015 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-09T19:48:05.816Z,1536522485.816 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_PROCESSING 2018-09-09T19:48:08.223Z,1536522488.223 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-09T19:59:31.416Z,1536523171.416 [ESPComponent](IMPORTANT): [sample #13] ESP sampling state: S_STOPPING 2018-09-09T19:59:56.622Z,1536523196.622 [ESPComponent](IMPORTANT): [sample #13] ESP sampling sequence completed normally. 2018-09-09T19:59:57.015Z,1536523197.015 [ESPComponent](IMPORTANT): [sample #13] ESP log summary report (2 messages): @11:55:16.49 Selecting Cartridge 45 @12:47:50.03 Sampled 1000.0ml 2018-09-09T19:59:57.932Z,1536523197.932 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 9.000000 count completed. 2018-09-09T20:00:03.887Z,1536523203.887 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 10.000000 count . Target temp = 12.000000 degC . 2018-09-09T20:00:05.106Z,1536523205.106 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-09T20:46:10.351Z,1536525970.351 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-09T20:46:21.158Z,1536525981.158 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.005549 CHAN A1 (24V): -0.026776 CHAN A2 (12V): -0.004555 CHAN A3 (5V): -0.002823 CHAN B0 (3.3V): -0.001013 CHAN B1 (3.15aV): -0.001228 CHAN B2 (3.15bV): -0.001155 CHAN B3 (GND): -0.000513 OPEN: 0.004837 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-09T21:00:07.525Z,1536526807.525 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 36.806503 m , 12.016290 degC , 0.654900 ug/l . 2018-09-09T21:00:09.023Z,1536526809.023 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-09T21:00:09.024Z,1536526809.024 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-09T21:00:09.087Z,1536526809.087 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-09T21:00:09.260Z,1536526809.260 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-09T21:00:39.503Z,1536526839.503 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-09T21:00:40.307Z,1536526840.307 [ESPComponent](IMPORTANT): [sample #14] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-09T21:00:40.820Z,1536526840.820 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-09T21:00:41.103Z,1536526841.103 [ESPComponent](IMPORTANT): [sample #14] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-09T21:00:41.505Z,1536526841.505 [ESPComponent](IMPORTANT): [sample #14] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-09T21:00:43.504Z,1536526843.504 [ESPComponent](IMPORTANT): [sample #14] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-09T21:01:16.306Z,1536526876.306 [ESPComponent](IMPORTANT): [sample #14] ESP sampling state: S_FILTERING 2018-09-09T21:01:18.703Z,1536526878.703 [ESPComponent](IMPORTANT): [sample #14] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-09T21:47:59.103Z,1536529679.103 [ESPComponent](IMPORTANT): [sample #14] ESP sampling state: S_PROCESSING 2018-09-09T21:48:01.504Z,1536529681.504 [ESPComponent](IMPORTANT): [sample #14] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-09T21:59:24.703Z,1536530364.703 [ESPComponent](IMPORTANT): [sample #14] ESP sampling state: S_STOPPING 2018-09-09T21:59:49.905Z,1536530389.905 [ESPComponent](IMPORTANT): [sample #14] ESP sampling sequence completed normally. 2018-09-09T21:59:50.304Z,1536530390.304 [ESPComponent](IMPORTANT): [sample #14] ESP log summary report (2 messages): @14:00:42.05 Selecting Cartridge 44 @14:47:43.66 Sampled 1000.1ml 2018-09-09T21:59:51.198Z,1536530391.198 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 10.000000 count completed. 2018-09-09T21:59:57.179Z,1536530397.179 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 11.000000 count . Target temp = 12.000000 degC . 2018-09-09T21:59:58.432Z,1536530398.432 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-09T22:09:20.350Z,1536530960.350 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 7 sticks. 2018-09-09T23:00:01.195Z,1536534001.195 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 32.194225 m , 12.062311 degC , 0.088800 ug/l . 2018-09-09T23:00:02.707Z,1536534002.707 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-09T23:00:02.707Z,1536534002.707 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-09T23:00:02.779Z,1536534002.779 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-09T23:00:02.928Z,1536534002.928 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-09T23:00:33.127Z,1536534033.127 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-09T23:00:33.945Z,1536534033.945 [ESPComponent](IMPORTANT): [sample #15] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-09T23:00:34.411Z,1536534034.411 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-09T23:00:34.728Z,1536534034.728 [ESPComponent](IMPORTANT): [sample #15] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-09T23:00:35.128Z,1536534035.128 [ESPComponent](IMPORTANT): [sample #15] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-09T23:00:37.128Z,1536534037.128 [ESPComponent](IMPORTANT): [sample #15] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-09T23:01:09.935Z,1536534069.935 [ESPComponent](IMPORTANT): [sample #15] ESP sampling state: S_FILTERING 2018-09-09T23:01:12.328Z,1536534072.328 [ESPComponent](IMPORTANT): [sample #15] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-09T23:54:33.530Z,1536537273.530 [ESPComponent](IMPORTANT): [sample #15] ESP sampling state: S_PROCESSING 2018-09-09T23:54:35.928Z,1536537275.928 [ESPComponent](IMPORTANT): [sample #15] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-10T00:05:59.128Z,1536537959.128 [ESPComponent](IMPORTANT): [sample #15] ESP sampling state: S_STOPPING 2018-09-10T00:06:24.333Z,1536537984.333 [ESPComponent](IMPORTANT): [sample #15] ESP sampling sequence completed normally. 2018-09-10T00:06:24.731Z,1536537984.731 [ESPComponent](IMPORTANT): [sample #15] ESP log summary report (2 messages): @16:00:35.62 Selecting Cartridge 43 @16:54:17.76 Sampled 1000.0ml 2018-09-10T00:06:25.631Z,1536537985.631 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 11.000000 count completed. 2018-09-10T00:06:31.618Z,1536537991.618 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 12.000000 count . Target temp = 12.000000 degC . 2018-09-10T00:06:32.839Z,1536537992.839 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-10T01:06:35.610Z,1536541595.610 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 34.707134 m , 11.747797 degC , 0.099900 ug/l . 2018-09-10T01:06:37.135Z,1536541597.135 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-10T01:06:37.136Z,1536541597.136 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-10T01:06:37.219Z,1536541597.219 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-10T01:06:37.321Z,1536541597.321 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-10T01:07:07.948Z,1536541627.948 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-10T01:07:08.751Z,1536541628.751 [ESPComponent](IMPORTANT): [sample #16] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-10T01:07:09.270Z,1536541629.270 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-10T01:07:09.554Z,1536541629.554 [ESPComponent](IMPORTANT): [sample #16] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-10T01:07:09.949Z,1536541629.949 [ESPComponent](IMPORTANT): [sample #16] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-10T01:07:11.949Z,1536541631.949 [ESPComponent](IMPORTANT): [sample #16] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-10T01:07:44.748Z,1536541664.748 [ESPComponent](IMPORTANT): [sample #16] ESP sampling state: S_FILTERING 2018-09-10T01:07:47.955Z,1536541667.955 [ESPComponent](IMPORTANT): [sample #16] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-10T01:58:01.949Z,1536544681.949 [ESPComponent](IMPORTANT): [sample #16] ESP sampling state: S_PROCESSING 2018-09-10T01:58:04.347Z,1536544684.347 [ESPComponent](IMPORTANT): [sample #16] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-10T02:09:27.548Z,1536545367.548 [ESPComponent](IMPORTANT): [sample #16] ESP sampling state: S_STOPPING 2018-09-10T02:09:52.749Z,1536545392.749 [ESPComponent](IMPORTANT): [sample #16] ESP sampling sequence completed normally. 2018-09-10T02:09:53.147Z,1536545393.147 [ESPComponent](IMPORTANT): [sample #16] ESP log summary report (2 messages): @18:07:10.68 Selecting Cartridge 42 @18:57:46.40 Sampled 1000.0ml 2018-09-10T02:09:54.083Z,1536545394.083 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 12.000000 count completed. 2018-09-10T02:10:00.061Z,1536545400.061 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 13.000000 count . Target temp = 12.000000 degC . 2018-09-10T02:10:01.251Z,1536545401.251 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-10T02:46:21.288Z,1536547581.288 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-10T02:46:32.548Z,1536547592.548 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.119431 CHAN A1 (24V): -0.027018 CHAN A2 (12V): -0.004720 CHAN A3 (5V): -0.003319 CHAN B0 (3.3V): -0.001164 CHAN B1 (3.15aV): -0.001318 CHAN B2 (3.15bV): -0.001232 CHAN B3 (GND): -0.000584 OPEN: 0.004809 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-10T03:10:03.642Z,1536549003.642 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 28.218534 m , 11.871912 degC , 0.266400 ug/l . 2018-09-10T03:10:05.152Z,1536549005.152 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-10T03:10:05.152Z,1536549005.152 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-10T03:10:05.215Z,1536549005.215 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-10T03:10:05.352Z,1536549005.352 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-10T03:10:38.347Z,1536549038.347 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-10T03:10:39.152Z,1536549039.152 [ESPComponent](IMPORTANT): [sample #17] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-10T03:10:39.653Z,1536549039.653 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-10T03:10:39.947Z,1536549039.947 [ESPComponent](IMPORTANT): [sample #17] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-10T03:10:40.347Z,1536549040.347 [ESPComponent](IMPORTANT): [sample #17] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-10T03:10:42.350Z,1536549042.350 [ESPComponent](IMPORTANT): [sample #17] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-10T03:11:15.147Z,1536549075.147 [ESPComponent](IMPORTANT): [sample #17] ESP sampling state: S_FILTERING 2018-09-10T03:11:17.548Z,1536549077.548 [ESPComponent](IMPORTANT): [sample #17] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-10T03:59:03.947Z,1536551943.947 [ESPComponent](IMPORTANT): [sample #17] ESP sampling state: S_PROCESSING 2018-09-10T03:59:06.347Z,1536551946.347 [ESPComponent](IMPORTANT): [sample #17] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-10T03:59:14.389Z,1536551954.389 [DAT](FAULT): unknown deviceResponse_: 5 2018-09-10T03:59:15.187Z,1536551955.187 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-09-10T03:59:18.039Z,1536551958.039 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T04:10:29.548Z,1536552629.548 [ESPComponent](IMPORTANT): [sample #17] ESP sampling state: S_STOPPING 2018-09-10T04:10:54.749Z,1536552654.749 [ESPComponent](IMPORTANT): [sample #17] ESP sampling sequence completed normally. 2018-09-10T04:10:55.147Z,1536552655.147 [ESPComponent](IMPORTANT): [sample #17] ESP log summary report (2 messages): @20:10:40.87 Selecting Cartridge 41 @20:58:48.44 Sampled 1000.0ml 2018-09-10T04:10:56.072Z,1536552656.072 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 13.000000 count completed. 2018-09-10T04:11:02.074Z,1536552662.074 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 14.000000 count . Target temp = 12.000000 degC . 2018-09-10T04:11:03.236Z,1536552663.236 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-10T05:11:05.656Z,1536556265.656 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 25.393408 m , 11.977808 degC , 0.222000 ug/l . 2018-09-10T05:11:07.151Z,1536556267.151 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-10T05:11:07.152Z,1536556267.152 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-10T05:11:07.240Z,1536556267.240 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-10T05:11:07.355Z,1536556267.355 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-10T05:11:38.015Z,1536556298.015 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-10T05:11:38.820Z,1536556298.820 [ESPComponent](IMPORTANT): [sample #18] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-10T05:11:39.318Z,1536556299.318 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-10T05:11:39.618Z,1536556299.618 [ESPComponent](IMPORTANT): [sample #18] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-10T05:11:40.015Z,1536556300.015 [ESPComponent](IMPORTANT): [sample #18] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-10T05:11:42.015Z,1536556302.015 [ESPComponent](IMPORTANT): [sample #18] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-10T05:12:14.816Z,1536556334.816 [ESPComponent](IMPORTANT): [sample #18] ESP sampling state: S_FILTERING 2018-09-10T05:12:17.216Z,1536556337.216 [ESPComponent](IMPORTANT): [sample #18] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-10T06:03:07.615Z,1536559387.615 [ESPComponent](IMPORTANT): [sample #18] ESP sampling state: S_PROCESSING 2018-09-10T06:03:10.015Z,1536559390.015 [ESPComponent](IMPORTANT): [sample #18] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-10T06:14:33.216Z,1536560073.216 [ESPComponent](IMPORTANT): [sample #18] ESP sampling state: S_STOPPING 2018-09-10T06:14:58.417Z,1536560098.417 [ESPComponent](IMPORTANT): [sample #18] ESP sampling sequence completed normally. 2018-09-10T06:14:58.816Z,1536560098.816 [ESPComponent](IMPORTANT): [sample #18] ESP log summary report (2 messages): @22:11:40.74 Selecting Cartridge 40 @23:02:51.82 Sampled 1000.0ml 2018-09-10T06:14:59.733Z,1536560099.733 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 14.000000 count completed. 2018-09-10T06:15:05.713Z,1536560105.713 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 15.000000 count . Target temp = 12.000000 degC . 2018-09-10T06:15:06.930Z,1536560106.930 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-10T06:21:24.073Z,1536560484.073 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks. 2018-09-10T07:15:09.309Z,1536563709.309 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 26.160332 m , 11.937585 degC , 0.188700 ug/l . 2018-09-10T07:15:10.818Z,1536563710.818 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-10T07:15:10.819Z,1536563710.819 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-10T07:15:10.907Z,1536563710.907 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-10T07:15:11.023Z,1536563711.023 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-10T07:15:41.220Z,1536563741.220 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-10T07:15:42.025Z,1536563742.025 [ESPComponent](IMPORTANT): [sample #19] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-10T07:15:42.527Z,1536563742.527 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-10T07:15:42.823Z,1536563742.823 [ESPComponent](IMPORTANT): [sample #19] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-10T07:15:43.225Z,1536563743.225 [ESPComponent](IMPORTANT): [sample #19] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-10T07:15:45.220Z,1536563745.220 [ESPComponent](IMPORTANT): [sample #19] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-10T07:16:18.027Z,1536563778.027 [ESPComponent](IMPORTANT): [sample #19] ESP sampling state: S_FILTERING 2018-09-10T07:16:21.226Z,1536563781.226 [ESPComponent](IMPORTANT): [sample #19] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-10T07:50:41.273Z,1536565841.273 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 7 sticks. 2018-09-10T08:07:30.819Z,1536566850.819 [ESPComponent](IMPORTANT): [sample #19] ESP sampling state: S_PROCESSING 2018-09-10T08:07:33.224Z,1536566853.224 [ESPComponent](IMPORTANT): [sample #19] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-10T08:18:56.420Z,1536567536.420 [ESPComponent](IMPORTANT): [sample #19] ESP sampling state: S_STOPPING 2018-09-10T08:19:22.022Z,1536567562.022 [ESPComponent](IMPORTANT): [sample #19] ESP sampling sequence completed normally. 2018-09-10T08:19:22.420Z,1536567562.420 [ESPComponent](IMPORTANT): [sample #19] ESP log summary report (2 messages): @00:15:43.62 Selecting Cartridge 39 @01:07:15.15 Sampled 1000.0ml 2018-09-10T08:19:23.302Z,1536567563.302 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 15.000000 count completed. 2018-09-10T08:19:29.322Z,1536567569.322 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 16.000000 count . Target temp = 12.000000 degC . 2018-09-10T08:19:30.545Z,1536567570.545 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-10T08:46:32.560Z,1536569192.560 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-10T08:46:43.388Z,1536569203.388 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.119705 CHAN A1 (24V): -0.027183 CHAN A2 (12V): -0.004204 CHAN A3 (5V): -0.002605 CHAN B0 (3.3V): -0.000972 CHAN B1 (3.15aV): -0.001488 CHAN B2 (3.15bV): -0.001200 CHAN B3 (GND): -0.000462 OPEN: 0.004712 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-10T09:19:33.336Z,1536571173.336 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 38.216511 m , 11.975397 degC , 0.421800 ug/l . 2018-09-10T09:19:34.824Z,1536571174.824 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-10T09:19:34.825Z,1536571174.825 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-10T09:19:34.907Z,1536571174.907 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-10T09:19:35.042Z,1536571175.042 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-10T09:20:05.275Z,1536571205.275 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-10T09:20:06.079Z,1536571206.079 [ESPComponent](IMPORTANT): [sample #20] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-10T09:20:06.578Z,1536571206.578 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-10T09:20:06.876Z,1536571206.876 [ESPComponent](IMPORTANT): [sample #20] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-10T09:20:07.275Z,1536571207.275 [ESPComponent](IMPORTANT): [sample #20] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-10T09:20:09.275Z,1536571209.275 [ESPComponent](IMPORTANT): [sample #20] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-10T09:20:42.078Z,1536571242.078 [ESPComponent](IMPORTANT): [sample #20] ESP sampling state: S_FILTERING 2018-09-10T09:20:44.479Z,1536571244.479 [ESPComponent](IMPORTANT): [sample #20] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-10T10:10:35.680Z,1536574235.680 [ESPComponent](IMPORTANT): [sample #20] ESP sampling state: S_PROCESSING 2018-09-10T10:10:38.079Z,1536574238.079 [ESPComponent](IMPORTANT): [sample #20] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-10T10:22:01.290Z,1536574921.290 [ESPComponent](IMPORTANT): [sample #20] ESP sampling state: S_STOPPING 2018-09-10T10:22:26.478Z,1536574946.478 [ESPComponent](IMPORTANT): [sample #20] ESP sampling sequence completed normally. 2018-09-10T10:22:26.876Z,1536574946.876 [ESPComponent](IMPORTANT): [sample #20] ESP log summary report (2 messages): @02:20:07.85 Selecting Cartridge 38 @03:10:20.12 Sampled 1000.1ml 2018-09-10T10:22:27.754Z,1536574947.754 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 16.000000 count completed. 2018-09-10T10:22:33.786Z,1536574953.786 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 17.000000 count . Target temp = 12.000000 degC . 2018-09-10T10:22:34.951Z,1536574954.951 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-10T10:37:36.926Z,1536575856.926 [DAT](FAULT): unknown deviceResponse_: 4 CCERR:007 2018-09-10T10:37:40.550Z,1536575860.550 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T10:40:36.537Z,1536576036.537 [DAT](FAULT): unknown deviceResponse_: received 2018-09-10T10:40:40.146Z,1536576040.146 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T10:42:06.558Z,1536576126.558 [DAT](FAULT): unknown deviceResponse_: :000 2018-09-10T10:42:10.199Z,1536576130.199 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T10:51:07.322Z,1536576667.322 [DAT](FAULT): unknown deviceResponse_: NR:08.3 AGC:57 SPD:+00.0 CCERR:006 2018-09-10T10:51:10.950Z,1536576670.950 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T10:52:37.316Z,1536576757.316 [DAT](FAULT): unknown deviceResponse_: C:55 SPD:+02.2 CCERR:007 2018-09-10T10:52:41.008Z,1536576761.008 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T10:54:07.321Z,1536576847.321 [DAT](FAULT): unknown deviceResponse_: .0 AGC:50 SPD:+00.0 CCERR:008 2018-09-10T10:54:10.951Z,1536576850.951 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T11:03:07.724Z,1536577387.724 [DAT](FAULT): unknown deviceResponse_: SNR:10.3 AGC:59 SPD:+00.0 CCERR:009 2018-09-10T11:03:11.358Z,1536577391.358 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T11:04:37.712Z,1536577477.712 [DAT](FAULT): unknown deviceResponse_: R:11.1 AGC:60 SPD:+01.4 CCERR:009 2018-09-10T11:04:41.411Z,1536577481.411 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T11:06:07.721Z,1536577567.721 [DAT](FAULT): unknown deviceResponse_: 0 CCERR:010 2018-09-10T11:06:11.358Z,1536577571.358 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T11:07:37.350Z,1536577657.350 [DAT](FAULT): unknown deviceResponse_: on:000 2018-09-10T11:07:41.014Z,1536577661.014 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T11:19:38.117Z,1536578378.117 [DAT](FAULT): unknown deviceResponse_: NR:08.2 AGC:61 SPD:-01.9 CCERR:007 2018-09-10T11:19:41.759Z,1536578381.759 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T11:22:37.787Z,1536578557.787 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 31.330406 m , 12.015894 degC , 0.244200 ug/l . 2018-09-10T11:22:39.281Z,1536578559.281 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-10T11:22:39.282Z,1536578559.282 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-10T11:22:39.354Z,1536578559.354 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-10T11:22:39.475Z,1536578559.475 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-10T11:23:10.076Z,1536578590.076 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-10T11:23:10.879Z,1536578590.879 [ESPComponent](IMPORTANT): [sample #21] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-10T11:23:11.385Z,1536578591.385 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-10T11:23:11.679Z,1536578591.679 [ESPComponent](IMPORTANT): [sample #21] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-10T11:23:12.078Z,1536578592.078 [ESPComponent](IMPORTANT): [sample #21] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-10T11:23:14.076Z,1536578594.076 [ESPComponent](IMPORTANT): [sample #21] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-10T11:23:46.876Z,1536578626.876 [ESPComponent](IMPORTANT): [sample #21] ESP sampling state: S_FILTERING 2018-09-10T11:23:49.280Z,1536578629.280 [ESPComponent](IMPORTANT): [sample #21] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-10T11:36:08.136Z,1536579368.136 [DAT](FAULT): unknown deviceResponse_: th bad CRC received 2018-09-10T11:36:11.731Z,1536579371.731 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T11:49:38.557Z,1536580178.557 [DAT](FAULT): unknown deviceResponse_: CRC received 2018-09-10T11:49:42.163Z,1536580182.163 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T12:01:38.946Z,1536580898.946 [DAT](FAULT): unknown deviceResponse_: ):atr6 2018-09-10T12:01:42.603Z,1536580902.603 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T12:12:17.275Z,1536581537.275 [ESPComponent](IMPORTANT): [sample #21] ESP sampling state: S_PROCESSING 2018-09-10T12:12:19.676Z,1536581539.676 [ESPComponent](IMPORTANT): [sample #21] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-10T12:22:14.125Z,1536582134.125 [DAT](FAULT): unknown deviceResponse_: stats CRC:Fail SNR:04.3 CCERR:004 2018-09-10T12:22:17.751Z,1536582137.751 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T12:23:42.881Z,1536582222.881 [ESPComponent](IMPORTANT): [sample #21] ESP sampling state: S_STOPPING 2018-09-10T12:24:08.081Z,1536582248.081 [ESPComponent](IMPORTANT): [sample #21] ESP sampling sequence completed normally. 2018-09-10T12:24:08.476Z,1536582248.476 [ESPComponent](IMPORTANT): [sample #21] ESP log summary report (2 messages): @04:23:12.62 Selecting Cartridge 37 @05:12:01.61 Sampled 1000.0ml 2018-09-10T12:24:09.358Z,1536582249.358 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 17.000000 count completed. 2018-09-10T12:24:15.365Z,1536582255.365 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 18.000000 count . Target temp = 12.000000 degC . 2018-09-10T12:24:16.554Z,1536582256.554 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-10T13:24:18.982Z,1536585858.982 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 31.086864 m , 11.971704 degC , 0.199800 ug/l . 2018-09-10T13:24:20.478Z,1536585860.478 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-10T13:24:20.479Z,1536585860.479 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-10T13:24:20.555Z,1536585860.555 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-10T13:24:20.687Z,1536585860.687 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-10T13:24:51.275Z,1536585891.275 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-10T13:24:52.079Z,1536585892.079 [ESPComponent](IMPORTANT): [sample #22] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-10T13:24:52.585Z,1536585892.585 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-10T13:24:52.876Z,1536585892.876 [ESPComponent](IMPORTANT): [sample #22] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-10T13:24:53.275Z,1536585893.275 [ESPComponent](IMPORTANT): [sample #22] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-10T13:24:55.275Z,1536585895.275 [ESPComponent](IMPORTANT): [sample #22] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-10T13:25:28.076Z,1536585928.076 [ESPComponent](IMPORTANT): [sample #22] ESP sampling state: S_FILTERING 2018-09-10T13:25:30.479Z,1536585930.479 [ESPComponent](IMPORTANT): [sample #22] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-10T14:19:32.876Z,1536589172.876 [ESPComponent](IMPORTANT): [sample #22] ESP sampling state: S_PROCESSING 2018-09-10T14:19:35.275Z,1536589175.275 [ESPComponent](IMPORTANT): [sample #22] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-10T14:30:58.477Z,1536589858.477 [ESPComponent](IMPORTANT): [sample #22] ESP sampling state: S_STOPPING 2018-09-10T14:31:23.680Z,1536589883.680 [ESPComponent](IMPORTANT): [sample #22] ESP sampling sequence completed normally. 2018-09-10T14:31:24.076Z,1536589884.076 [ESPComponent](IMPORTANT): [sample #22] ESP log summary report (2 messages): @06:24:53.69 Selecting Cartridge 36 @07:19:17.21 Sampled 1000.0ml 2018-09-10T14:31:24.979Z,1536589884.979 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 18.000000 count completed. 2018-09-10T14:31:30.974Z,1536589890.974 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 19.000000 count . Target temp = 12.000000 degC . 2018-09-10T14:31:32.171Z,1536589892.171 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-10T14:46:43.468Z,1536590803.468 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-10T14:46:54.203Z,1536590814.203 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.006401 CHAN A1 (24V): -0.026735 CHAN A2 (12V): -0.004489 CHAN A3 (5V): -0.002814 CHAN B0 (3.3V): -0.001249 CHAN B1 (3.15aV): -0.001084 CHAN B2 (3.15bV): -0.000999 CHAN B3 (GND): -0.000612 OPEN: 0.004780 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-10T14:55:29.724Z,1536591329.724 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 7 sticks. 2018-09-10T15:31:34.973Z,1536593494.973 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 25.408318 m , 12.355798 degC , 0.144300 ug/l . 2018-09-10T15:31:36.483Z,1536593496.483 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-10T15:31:36.484Z,1536593496.484 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-10T15:31:36.540Z,1536593496.540 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-10T15:31:36.692Z,1536593496.692 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-10T15:32:07.280Z,1536593527.280 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-10T15:32:08.090Z,1536593528.090 [ESPComponent](IMPORTANT): [sample #23] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-10T15:32:08.567Z,1536593528.567 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-10T15:32:08.881Z,1536593528.881 [ESPComponent](IMPORTANT): [sample #23] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-10T15:32:09.280Z,1536593529.280 [ESPComponent](IMPORTANT): [sample #23] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-10T15:32:11.275Z,1536593531.275 [ESPComponent](IMPORTANT): [sample #23] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-10T15:32:44.076Z,1536593564.076 [ESPComponent](IMPORTANT): [sample #23] ESP sampling state: S_FILTERING 2018-09-10T15:32:46.478Z,1536593566.478 [ESPComponent](IMPORTANT): [sample #23] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-10T16:24:28.476Z,1536596668.476 [ESPComponent](IMPORTANT): [sample #23] ESP sampling state: S_PROCESSING 2018-09-10T16:24:30.876Z,1536596670.876 [ESPComponent](IMPORTANT): [sample #23] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-10T16:35:54.077Z,1536597354.077 [ESPComponent](IMPORTANT): [sample #23] ESP sampling state: S_STOPPING 2018-09-10T16:36:19.280Z,1536597379.280 [ESPComponent](IMPORTANT): [sample #23] ESP sampling sequence completed normally. 2018-09-10T16:36:19.676Z,1536597379.676 [ESPComponent](IMPORTANT): [sample #23] ESP log summary report (2 messages): @08:32:09.62 Selecting Cartridge 35 @09:24:12.80 Sampled 1000.0ml 2018-09-10T16:36:20.564Z,1536597380.564 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 19.000000 count completed. 2018-09-10T16:36:26.578Z,1536597386.578 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 20.000000 count . Target temp = 12.000000 degC . 2018-09-10T16:36:27.793Z,1536597387.793 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-10T17:29:52.928Z,1536600592.928 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 7 sticks. 2018-09-10T17:36:30.564Z,1536600990.564 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 25.008701 m , 11.968011 degC , 0.210900 ug/l . 2018-09-10T17:36:32.080Z,1536600992.080 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-10T17:36:32.080Z,1536600992.080 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-10T17:36:32.147Z,1536600992.147 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-10T17:36:32.285Z,1536600992.285 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-10T17:37:02.880Z,1536601022.880 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-10T17:37:03.682Z,1536601023.682 [ESPComponent](IMPORTANT): [sample #24] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-10T17:37:04.193Z,1536601024.193 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-10T17:37:04.480Z,1536601024.480 [ESPComponent](IMPORTANT): [sample #24] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-10T17:37:04.880Z,1536601024.880 [ESPComponent](IMPORTANT): [sample #24] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-10T17:37:06.880Z,1536601026.880 [ESPComponent](IMPORTANT): [sample #24] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-10T17:37:39.680Z,1536601059.680 [ESPComponent](IMPORTANT): [sample #24] ESP sampling state: S_FILTERING 2018-09-10T17:37:42.081Z,1536601062.081 [ESPComponent](IMPORTANT): [sample #24] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-10T18:26:14.481Z,1536603974.481 [ESPComponent](IMPORTANT): [sample #24] ESP sampling state: S_PROCESSING 2018-09-10T18:26:16.880Z,1536603976.880 [ESPComponent](IMPORTANT): [sample #24] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-10T18:29:32.561Z,1536604172.561 [DAT](FAULT): unknown deviceResponse_: Rx quest 2018-09-10T18:29:33.345Z,1536604173.345 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-09-10T18:29:36.159Z,1536604176.159 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T18:37:40.081Z,1536604660.081 [ESPComponent](IMPORTANT): [sample #24] ESP sampling state: S_STOPPING 2018-09-10T18:38:05.281Z,1536604685.281 [ESPComponent](IMPORTANT): [sample #24] ESP sampling sequence completed normally. 2018-09-10T18:38:05.680Z,1536604685.680 [ESPComponent](IMPORTANT): [sample #24] ESP log summary report (2 messages): @10:37:05.39 Selecting Cartridge 34 @11:25:58.54 Sampled 1000.0ml 2018-09-10T18:38:06.583Z,1536604686.583 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 20.000000 count completed. 2018-09-10T18:38:12.571Z,1536604692.571 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 21.000000 count . Target temp = 12.000000 degC . 2018-09-10T18:38:13.765Z,1536604693.765 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-10T19:38:16.565Z,1536608296.565 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 31.338358 m , 12.244989 degC , 0.255300 ug/l . 2018-09-10T19:38:18.092Z,1536608298.092 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-10T19:38:18.093Z,1536608298.093 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-10T19:38:18.146Z,1536608298.146 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-10T19:38:18.297Z,1536608298.297 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-10T19:38:48.112Z,1536608328.112 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-10T19:38:48.914Z,1536608328.914 [ESPComponent](IMPORTANT): [sample #25] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-10T19:38:49.412Z,1536608329.412 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-10T19:38:49.712Z,1536608329.712 [ESPComponent](IMPORTANT): [sample #25] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-10T19:38:50.112Z,1536608330.112 [ESPComponent](IMPORTANT): [sample #25] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-10T19:38:52.115Z,1536608332.115 [ESPComponent](IMPORTANT): [sample #25] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-10T19:39:24.911Z,1536608364.911 [ESPComponent](IMPORTANT): [sample #25] ESP sampling state: S_FILTERING 2018-09-10T19:39:28.112Z,1536608368.112 [ESPComponent](IMPORTANT): [sample #25] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-10T20:29:08.911Z,1536611348.911 [ESPComponent](IMPORTANT): [sample #25] ESP sampling state: S_PROCESSING 2018-09-10T20:29:11.311Z,1536611351.311 [ESPComponent](IMPORTANT): [sample #25] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-10T20:40:34.512Z,1536612034.512 [ESPComponent](IMPORTANT): [sample #25] ESP sampling state: S_STOPPING 2018-09-10T20:40:59.713Z,1536612059.713 [ESPComponent](IMPORTANT): [sample #25] ESP sampling sequence completed normally. 2018-09-10T20:41:00.112Z,1536612060.112 [ESPComponent](IMPORTANT): [sample #25] ESP log summary report (2 messages): @12:38:50.39 Selecting Cartridge 33 @13:28:53.10 Sampled 1000.0ml 2018-09-10T20:41:01.005Z,1536612061.005 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 21.000000 count completed. 2018-09-10T20:41:07.013Z,1536612067.013 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 22.000000 count . Target temp = 12.000000 degC . 2018-09-10T20:41:08.207Z,1536612068.207 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-10T20:46:54.241Z,1536612414.241 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-10T20:47:05.033Z,1536612425.033 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.118913 CHAN A1 (24V): -0.026820 CHAN A2 (12V): -0.004720 CHAN A3 (5V): -0.002487 CHAN B0 (3.3V): -0.001641 CHAN B1 (3.15aV): -0.001500 CHAN B2 (3.15bV): -0.000832 CHAN B3 (GND): -0.000136 OPEN: 0.004674 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-10T21:41:10.612Z,1536615670.612 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 34.712105 m , 11.961389 degC , 0.166500 ug/l . 2018-09-10T21:41:12.115Z,1536615672.115 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-10T21:41:12.116Z,1536615672.116 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-10T21:41:12.163Z,1536615672.163 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-10T21:41:12.350Z,1536615672.350 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-10T21:41:42.132Z,1536615702.132 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-10T21:41:42.935Z,1536615702.935 [ESPComponent](IMPORTANT): [sample #26] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-10T21:41:43.425Z,1536615703.425 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-10T21:41:43.731Z,1536615703.731 [ESPComponent](IMPORTANT): [sample #26] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-10T21:41:44.132Z,1536615704.132 [ESPComponent](IMPORTANT): [sample #26] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-10T21:41:46.132Z,1536615706.132 [ESPComponent](IMPORTANT): [sample #26] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-10T21:42:18.932Z,1536615738.932 [ESPComponent](IMPORTANT): [sample #26] ESP sampling state: S_FILTERING 2018-09-10T21:42:21.332Z,1536615741.332 [ESPComponent](IMPORTANT): [sample #26] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-10T22:34:13.332Z,1536618853.332 [ESPComponent](IMPORTANT): [sample #26] ESP sampling state: S_PROCESSING 2018-09-10T22:34:15.732Z,1536618855.732 [ESPComponent](IMPORTANT): [sample #26] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-10T22:42:36.186Z,1536619356.186 [DAT](FAULT): unknown deviceResponse_: ime:14:29:22.1176 2018-09-10T22:42:39.818Z,1536619359.818 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-10T22:45:38.932Z,1536619538.932 [ESPComponent](IMPORTANT): [sample #26] ESP sampling state: S_STOPPING 2018-09-10T22:46:04.133Z,1536619564.133 [ESPComponent](IMPORTANT): [sample #26] ESP sampling sequence completed normally. 2018-09-10T22:46:04.532Z,1536619564.532 [ESPComponent](IMPORTANT): [sample #26] ESP log summary report (2 messages): @14:41:44.37 Selecting Cartridge 32 @15:33:57.76 Sampled 1000.1ml 2018-09-10T22:46:05.427Z,1536619565.427 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 22.000000 count completed. 2018-09-10T22:46:11.432Z,1536619571.432 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 23.000000 count . Target temp = 12.000000 degC . 2018-09-10T22:46:12.630Z,1536619572.630 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-10T23:46:15.407Z,1536623175.407 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 19.458227 m , 11.952386 degC , 0.199800 ug/l . 2018-09-10T23:46:16.935Z,1536623176.935 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-10T23:46:16.935Z,1536623176.935 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-10T23:46:17.027Z,1536623177.027 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-10T23:46:17.150Z,1536623177.150 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-10T23:46:47.377Z,1536623207.377 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-10T23:46:48.178Z,1536623208.178 [ESPComponent](IMPORTANT): [sample #27] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-10T23:46:48.672Z,1536623208.672 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-10T23:46:48.976Z,1536623208.976 [ESPComponent](IMPORTANT): [sample #27] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-10T23:46:49.376Z,1536623209.376 [ESPComponent](IMPORTANT): [sample #27] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-10T23:46:51.377Z,1536623211.377 [ESPComponent](IMPORTANT): [sample #27] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-10T23:47:24.176Z,1536623244.176 [ESPComponent](IMPORTANT): [sample #27] ESP sampling state: S_FILTERING 2018-09-10T23:47:26.575Z,1536623246.575 [ESPComponent](IMPORTANT): [sample #27] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-11T00:34:31.775Z,1536626071.775 [ESPComponent](IMPORTANT): [sample #27] ESP sampling state: S_PROCESSING 2018-09-11T00:34:34.176Z,1536626074.176 [ESPComponent](IMPORTANT): [sample #27] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-11T00:45:57.376Z,1536626757.376 [ESPComponent](IMPORTANT): [sample #27] ESP sampling state: S_STOPPING 2018-09-11T00:46:22.977Z,1536626782.977 [ESPComponent](IMPORTANT): [sample #27] ESP sampling sequence completed normally. 2018-09-11T00:46:23.376Z,1536626783.376 [ESPComponent](IMPORTANT): [sample #27] ESP log summary report (2 messages): @16:46:49.59 Selecting Cartridge 31 @17:34:15.98 Sampled 1000.0ml 2018-09-11T00:46:24.255Z,1536626784.255 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 23.000000 count completed. 2018-09-11T00:46:30.269Z,1536626790.269 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 24.000000 count . Target temp = 12.000000 degC . 2018-09-11T00:46:31.477Z,1536626791.477 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-11T01:42:03.031Z,1536630123.031 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks. 2018-09-11T01:46:33.881Z,1536630393.881 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 13.156538 m , 12.102197 degC , 0.310800 ug/l . 2018-09-11T01:46:35.379Z,1536630395.379 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-11T01:46:35.379Z,1536630395.379 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-11T01:46:35.446Z,1536630395.446 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-11T01:46:35.588Z,1536630395.588 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-11T01:47:06.175Z,1536630426.175 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-11T01:47:06.981Z,1536630426.981 [ESPComponent](IMPORTANT): [sample #28] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-11T01:47:07.467Z,1536630427.467 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-11T01:47:07.775Z,1536630427.775 [ESPComponent](IMPORTANT): [sample #28] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-11T01:47:08.176Z,1536630428.176 [ESPComponent](IMPORTANT): [sample #28] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-11T01:47:10.176Z,1536630430.176 [ESPComponent](IMPORTANT): [sample #28] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-11T01:47:42.979Z,1536630462.979 [ESPComponent](IMPORTANT): [sample #28] ESP sampling state: S_FILTERING 2018-09-11T01:47:45.376Z,1536630465.376 [ESPComponent](IMPORTANT): [sample #28] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-11T02:43:55.776Z,1536633835.776 [ESPComponent](IMPORTANT): [sample #28] ESP sampling state: S_PROCESSING 2018-09-11T02:43:58.176Z,1536633838.176 [ESPComponent](IMPORTANT): [sample #28] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-11T02:47:05.106Z,1536634025.106 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-11T02:47:15.919Z,1536634035.919 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.118427 CHAN A1 (24V): -0.026879 CHAN A2 (12V): -0.004629 CHAN A3 (5V): -0.002934 CHAN B0 (3.3V): -0.001116 CHAN B1 (3.15aV): -0.001549 CHAN B2 (3.15bV): -0.001140 CHAN B3 (GND): -0.000931 OPEN: 0.004902 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-11T02:55:21.376Z,1536634521.376 [ESPComponent](IMPORTANT): [sample #28] ESP sampling state: S_STOPPING 2018-09-11T02:55:46.977Z,1536634546.977 [ESPComponent](IMPORTANT): [sample #28] ESP sampling sequence completed normally. 2018-09-11T02:55:47.376Z,1536634547.376 [ESPComponent](IMPORTANT): [sample #28] ESP log summary report (2 messages): @18:47:08.62 Selecting Cartridge 30 @19:43:40.17 Sampled 1000.0ml 2018-09-11T02:55:48.273Z,1536634548.273 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 24.000000 count completed. 2018-09-11T02:55:54.255Z,1536634554.255 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 25.000000 count . Target temp = 12.000000 degC . 2018-09-11T02:55:55.480Z,1536634555.480 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-11T03:55:57.864Z,1536638157.864 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 21.791363 m , 12.158685 degC , 0.632700 ug/l . 2018-09-11T03:55:59.379Z,1536638159.379 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-11T03:55:59.379Z,1536638159.379 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-11T03:55:59.427Z,1536638159.427 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-11T03:55:59.585Z,1536638159.585 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-11T03:56:30.187Z,1536638190.187 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-11T03:56:30.990Z,1536638190.990 [ESPComponent](IMPORTANT): [sample #29] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-11T03:56:31.488Z,1536638191.488 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-11T03:56:31.787Z,1536638191.787 [ESPComponent](IMPORTANT): [sample #29] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-11T03:56:32.187Z,1536638192.187 [ESPComponent](IMPORTANT): [sample #29] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-11T03:56:34.187Z,1536638194.187 [ESPComponent](IMPORTANT): [sample #29] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-11T03:57:06.987Z,1536638226.987 [ESPComponent](IMPORTANT): [sample #29] ESP sampling state: S_FILTERING 2018-09-11T03:57:09.387Z,1536638229.387 [ESPComponent](IMPORTANT): [sample #29] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-11T04:19:07.425Z,1536639547.425 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks. 2018-09-11T04:46:22.588Z,1536641182.588 [ESPComponent](IMPORTANT): [sample #29] ESP sampling state: S_PROCESSING 2018-09-11T04:46:24.987Z,1536641184.987 [ESPComponent](IMPORTANT): [sample #29] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-11T04:57:48.191Z,1536641868.191 [ESPComponent](IMPORTANT): [sample #29] ESP sampling state: S_STOPPING 2018-09-11T04:58:13.389Z,1536641893.389 [ESPComponent](IMPORTANT): [sample #29] ESP sampling sequence completed normally. 2018-09-11T04:58:13.787Z,1536641893.787 [ESPComponent](IMPORTANT): [sample #29] ESP log summary report (2 messages): @20:56:32.24 Selecting Cartridge 29 @21:46:06.85 Sampled 1000.0ml 2018-09-11T04:58:14.666Z,1536641894.666 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 25.000000 count completed. 2018-09-11T04:58:20.689Z,1536641900.689 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 26.000000 count . Target temp = 12.000000 degC . 2018-09-11T04:58:21.867Z,1536641901.867 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-11T05:58:24.664Z,1536645504.664 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 24.187597 m , 12.118097 degC , 0.865800 ug/l . 2018-09-11T05:58:26.195Z,1536645506.195 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-11T05:58:26.196Z,1536645506.196 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-11T05:58:26.228Z,1536645506.228 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-11T05:58:26.419Z,1536645506.419 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-11T05:58:57.408Z,1536645537.408 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-11T05:58:58.211Z,1536645538.211 [ESPComponent](IMPORTANT): [sample #30] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-11T05:58:58.687Z,1536645538.687 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-11T05:58:59.007Z,1536645539.007 [ESPComponent](IMPORTANT): [sample #30] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-11T05:58:59.409Z,1536645539.409 [ESPComponent](IMPORTANT): [sample #30] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-11T05:59:01.408Z,1536645541.408 [ESPComponent](IMPORTANT): [sample #30] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-11T05:59:34.208Z,1536645574.208 [ESPComponent](IMPORTANT): [sample #30] ESP sampling state: S_FILTERING 2018-09-11T05:59:36.608Z,1536645576.608 [ESPComponent](IMPORTANT): [sample #30] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-11T06:19:29.058Z,1536646769.058 [DAT](FAULT): unknown deviceResponse_: 4.4 CCERR:003 2018-09-11T06:19:29.859Z,1536646769.859 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-09-11T06:19:32.698Z,1536646772.698 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-11T06:53:01.009Z,1536648781.009 [ESPComponent](IMPORTANT): [sample #30] ESP sampling state: S_PROCESSING 2018-09-11T06:53:03.408Z,1536648783.408 [ESPComponent](IMPORTANT): [sample #30] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-11T07:04:26.607Z,1536649466.607 [ESPComponent](IMPORTANT): [sample #30] ESP sampling state: S_STOPPING 2018-09-11T07:04:52.209Z,1536649492.209 [ESPComponent](IMPORTANT): [sample #30] ESP sampling sequence completed normally. 2018-09-11T07:04:52.608Z,1536649492.608 [ESPComponent](IMPORTANT): [sample #30] ESP log summary report (2 messages): @22:58:59.75 Selecting Cartridge 28 @23:52:45.16 Sampled 1000.0ml 2018-09-11T07:04:53.488Z,1536649493.488 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 26.000000 count completed. 2018-09-11T07:04:59.498Z,1536649499.498 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 27.000000 count . Target temp = 12.000000 degC . 2018-09-11T07:05:00.688Z,1536649500.688 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-11T07:25:18.659Z,1536650718.659 [DAT](FAULT): unknown deviceResponse_: eader stats CRC:Fail SNR:10.6 CCERR:005 2018-09-11T07:25:22.270Z,1536650722.270 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-11T08:05:03.117Z,1536653103.117 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 28.395477 m , 12.093195 degC , 0.543900 ug/l . 2018-09-11T08:05:04.613Z,1536653104.613 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-11T08:05:04.614Z,1536653104.614 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-11T08:05:04.695Z,1536653104.695 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-11T08:05:04.840Z,1536653104.840 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-11T08:05:35.416Z,1536653135.416 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-11T08:05:36.219Z,1536653136.219 [ESPComponent](IMPORTANT): [sample #31] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-11T08:05:36.716Z,1536653136.716 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-11T08:05:37.015Z,1536653137.015 [ESPComponent](IMPORTANT): [sample #31] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-11T08:05:37.416Z,1536653137.416 [ESPComponent](IMPORTANT): [sample #31] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-11T08:05:39.416Z,1536653139.416 [ESPComponent](IMPORTANT): [sample #31] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-11T08:06:12.215Z,1536653172.215 [ESPComponent](IMPORTANT): [sample #31] ESP sampling state: S_FILTERING 2018-09-11T08:06:14.615Z,1536653174.615 [ESPComponent](IMPORTANT): [sample #31] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-11T08:47:15.992Z,1536655635.992 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-11T08:47:26.859Z,1536655646.859 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.117833 CHAN A1 (24V): -0.026608 CHAN A2 (12V): -0.004734 CHAN A3 (5V): -0.002831 CHAN B0 (3.3V): -0.001264 CHAN B1 (3.15aV): -0.001241 CHAN B2 (3.15bV): -0.000969 CHAN B3 (GND): -0.000669 OPEN: 0.004846 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-11T08:57:52.216Z,1536656272.216 [ESPComponent](IMPORTANT): [sample #31] ESP sampling state: S_PROCESSING 2018-09-11T08:57:54.615Z,1536656274.615 [ESPComponent](IMPORTANT): [sample #31] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-11T09:09:17.816Z,1536656957.816 [ESPComponent](IMPORTANT): [sample #31] ESP sampling state: S_STOPPING 2018-09-11T09:09:43.016Z,1536656983.016 [ESPComponent](IMPORTANT): [sample #31] ESP sampling sequence completed normally. 2018-09-11T09:09:43.416Z,1536656983.416 [ESPComponent](IMPORTANT): [sample #31] ESP log summary report (2 messages): @01:05:37.77 Selecting Cartridge 27 @01:57:36.28 Sampled 1000.0ml 2018-09-11T09:09:44.302Z,1536656984.302 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 27.000000 count completed. 2018-09-11T09:09:50.291Z,1536656990.291 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 28.000000 count . Target temp = 12.000000 degC . 2018-09-11T09:09:51.515Z,1536656991.515 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-11T10:09:53.928Z,1536660593.928 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 27.018208 m , 11.881494 degC , 0.233100 ug/l . 2018-09-11T10:09:55.419Z,1536660595.419 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-11T10:09:55.419Z,1536660595.419 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-11T10:09:55.475Z,1536660595.475 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-11T10:09:55.637Z,1536660595.637 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-11T10:10:26.217Z,1536660626.217 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-11T10:10:27.018Z,1536660627.018 [ESPComponent](IMPORTANT): [sample #32] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-11T10:10:27.507Z,1536660627.507 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-11T10:10:27.816Z,1536660627.816 [ESPComponent](IMPORTANT): [sample #32] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-11T10:10:28.216Z,1536660628.216 [ESPComponent](IMPORTANT): [sample #32] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-11T10:10:30.216Z,1536660630.216 [ESPComponent](IMPORTANT): [sample #32] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-11T10:11:03.015Z,1536660663.015 [ESPComponent](IMPORTANT): [sample #32] ESP sampling state: S_FILTERING 2018-09-11T10:11:05.416Z,1536660665.416 [ESPComponent](IMPORTANT): [sample #32] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-11T10:18:51.865Z,1536661131.865 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks. 2018-09-11T11:03:15.416Z,1536663795.416 [ESPComponent](IMPORTANT): [sample #32] ESP sampling state: S_PROCESSING 2018-09-11T11:03:17.815Z,1536663797.815 [ESPComponent](IMPORTANT): [sample #32] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-11T11:14:41.016Z,1536664481.016 [ESPComponent](IMPORTANT): [sample #32] ESP sampling state: S_STOPPING 2018-09-11T11:15:06.219Z,1536664506.219 [ESPComponent](IMPORTANT): [sample #32] ESP sampling sequence completed normally. 2018-09-11T11:15:06.615Z,1536664506.615 [ESPComponent](IMPORTANT): [sample #32] ESP log summary report (2 messages): @03:10:28.36 Selecting Cartridge 26 @04:02:59.40 Sampled 1000.0ml 2018-09-11T11:15:07.505Z,1536664507.505 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 28.000000 count completed. 2018-09-11T11:15:13.499Z,1536664513.499 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 29.000000 count . Target temp = 12.000000 degC . 2018-09-11T11:15:14.716Z,1536664514.716 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-11T12:15:17.504Z,1536668117.504 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 26.257254 m , 12.084497 degC , 0.188700 ug/l . 2018-09-11T12:15:19.018Z,1536668119.018 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-11T12:15:19.018Z,1536668119.018 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-11T12:15:19.051Z,1536668119.051 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-11T12:15:19.255Z,1536668119.255 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-11T12:15:49.443Z,1536668149.443 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-11T12:15:50.253Z,1536668150.253 [ESPComponent](IMPORTANT): [sample #33] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-11T12:15:50.754Z,1536668150.754 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-11T12:15:51.044Z,1536668151.044 [ESPComponent](IMPORTANT): [sample #33] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-11T12:15:51.443Z,1536668151.443 [ESPComponent](IMPORTANT): [sample #33] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-11T12:15:53.446Z,1536668153.446 [ESPComponent](IMPORTANT): [sample #33] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-11T12:16:26.244Z,1536668186.244 [ESPComponent](IMPORTANT): [sample #33] ESP sampling state: S_FILTERING 2018-09-11T12:16:28.643Z,1536668188.643 [ESPComponent](IMPORTANT): [sample #33] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-11T13:06:49.044Z,1536671209.044 [ESPComponent](IMPORTANT): [sample #33] ESP sampling state: S_PROCESSING 2018-09-11T13:06:51.443Z,1536671211.443 [ESPComponent](IMPORTANT): [sample #33] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-11T13:18:14.643Z,1536671894.643 [ESPComponent](IMPORTANT): [sample #33] ESP sampling state: S_STOPPING 2018-09-11T13:18:39.845Z,1536671919.845 [ESPComponent](IMPORTANT): [sample #33] ESP sampling sequence completed normally. 2018-09-11T13:18:40.244Z,1536671920.244 [ESPComponent](IMPORTANT): [sample #33] ESP log summary report (2 messages): @05:15:51.48 Selecting Cartridge 25 @06:06:33.02 Sampled 1000.0ml 2018-09-11T13:18:41.147Z,1536671921.147 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 29.000000 count completed. 2018-09-11T13:18:47.143Z,1536671927.143 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 30.000000 count . Target temp = 12.000000 degC . 2018-09-11T13:18:48.335Z,1536671928.335 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-11T14:18:50.730Z,1536675530.730 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 35.491421 m , 11.983911 degC , 0.099900 ug/l . 2018-09-11T14:18:52.247Z,1536675532.247 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-11T14:18:52.247Z,1536675532.247 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-11T14:18:52.280Z,1536675532.280 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-11T14:18:52.460Z,1536675532.460 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-11T14:19:23.055Z,1536675563.055 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-11T14:19:23.858Z,1536675563.858 [ESPComponent](IMPORTANT): [sample #34] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-11T14:19:24.359Z,1536675564.359 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-11T14:19:24.655Z,1536675564.655 [ESPComponent](IMPORTANT): [sample #34] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-11T14:19:25.055Z,1536675565.055 [ESPComponent](IMPORTANT): [sample #34] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-11T14:19:27.055Z,1536675567.055 [ESPComponent](IMPORTANT): [sample #34] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-11T14:19:59.856Z,1536675599.856 [ESPComponent](IMPORTANT): [sample #34] ESP sampling state: S_FILTERING 2018-09-11T14:20:03.056Z,1536675603.056 [ESPComponent](IMPORTANT): [sample #34] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-11T14:47:27.250Z,1536677247.250 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-11T14:47:37.979Z,1536677257.979 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.118303 CHAN A1 (24V): -0.026893 CHAN A2 (12V): -0.004417 CHAN A3 (5V): -0.002822 CHAN B0 (3.3V): -0.001010 CHAN B1 (3.15aV): -0.001305 CHAN B2 (3.15bV): -0.001199 CHAN B3 (GND): -0.000672 OPEN: 0.004821 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-11T15:09:27.460Z,1536678567.460 [ESPComponent](IMPORTANT): [sample #34] ESP sampling state: S_PROCESSING 2018-09-11T15:09:29.855Z,1536678569.855 [ESPComponent](IMPORTANT): [sample #34] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-11T15:20:53.055Z,1536679253.055 [ESPComponent](IMPORTANT): [sample #34] ESP sampling state: S_STOPPING 2018-09-11T15:21:18.257Z,1536679278.257 [ESPComponent](IMPORTANT): [sample #34] ESP sampling sequence completed normally. 2018-09-11T15:21:18.656Z,1536679278.656 [ESPComponent](IMPORTANT): [sample #34] ESP log summary report (2 messages): @07:19:25.23 Selecting Cartridge 24 @08:09:11.53 Sampled 1000.0ml 2018-09-11T15:21:19.558Z,1536679279.558 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 30.000000 count completed. 2018-09-11T15:21:25.527Z,1536679285.527 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 31.000000 count . Target temp = 12.000000 degC . 2018-09-11T15:21:26.746Z,1536679286.746 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-11T16:21:29.148Z,1536682889.148 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 25.841236 m , 11.657404 degC , 0.144300 ug/l . 2018-09-11T16:21:30.658Z,1536682890.658 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-11T16:21:30.659Z,1536682890.659 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-11T16:21:30.711Z,1536682890.711 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-11T16:21:30.845Z,1536682890.845 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-11T16:22:01.456Z,1536682921.456 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-11T16:22:02.258Z,1536682922.258 [ESPComponent](IMPORTANT): [sample #35] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-11T16:22:02.748Z,1536682922.748 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-11T16:22:03.056Z,1536682923.056 [ESPComponent](IMPORTANT): [sample #35] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-11T16:22:03.456Z,1536682923.456 [ESPComponent](IMPORTANT): [sample #35] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-11T16:22:05.457Z,1536682925.457 [ESPComponent](IMPORTANT): [sample #35] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-11T16:22:38.259Z,1536682958.259 [ESPComponent](IMPORTANT): [sample #35] ESP sampling state: S_FILTERING 2018-09-11T16:22:40.657Z,1536682960.657 [ESPComponent](IMPORTANT): [sample #35] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-11T16:31:37.898Z,1536683497.898 [DAT](FAULT): unknown deviceResponse_: CRC:Pass MPD:03.4 SNR:11.3 AGC:55 SPD:-01.1 CCERR:009 2018-09-11T16:31:41.539Z,1536683501.539 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-11T17:14:25.856Z,1536686065.856 [ESPComponent](IMPORTANT): [sample #35] ESP sampling state: S_PROCESSING 2018-09-11T17:14:28.256Z,1536686068.256 [ESPComponent](IMPORTANT): [sample #35] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-11T17:25:51.456Z,1536686751.456 [ESPComponent](IMPORTANT): [sample #35] ESP sampling state: S_STOPPING 2018-09-11T17:26:16.656Z,1536686776.656 [ESPComponent](IMPORTANT): [sample #35] ESP sampling sequence completed normally. 2018-09-11T17:26:17.056Z,1536686777.056 [ESPComponent](IMPORTANT): [sample #35] ESP log summary report (2 messages): @09:22:03.74 Selecting Cartridge 23 @10:14:10.16 Sampled 1000.0ml 2018-09-11T17:26:17.949Z,1536686777.949 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 31.000000 count completed. 2018-09-11T17:26:23.951Z,1536686783.951 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 32.000000 count . Target temp = 12.000000 degC . 2018-09-11T17:26:25.156Z,1536686785.156 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-11T18:26:27.561Z,1536690387.561 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 30.919865 m , 12.233087 degC , 0.588300 ug/l . 2018-09-11T18:26:29.058Z,1536690389.058 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-11T18:26:29.059Z,1536690389.059 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-11T18:26:29.138Z,1536690389.138 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-11T18:26:29.343Z,1536690389.343 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-11T18:27:01.536Z,1536690421.536 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-11T18:27:02.338Z,1536690422.338 [ESPComponent](IMPORTANT): [sample #36] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-11T18:27:02.851Z,1536690422.851 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-11T18:27:03.135Z,1536690423.135 [ESPComponent](IMPORTANT): [sample #36] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-11T18:27:03.536Z,1536690423.536 [ESPComponent](IMPORTANT): [sample #36] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-11T18:27:05.536Z,1536690425.536 [ESPComponent](IMPORTANT): [sample #36] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-11T18:27:38.336Z,1536690458.336 [ESPComponent](IMPORTANT): [sample #36] ESP sampling state: S_FILTERING 2018-09-11T18:27:41.536Z,1536690461.536 [ESPComponent](IMPORTANT): [sample #36] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-11T18:33:20.776Z,1536690800.776 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 31 sticks. 2018-09-11T19:21:25.135Z,1536693685.135 [ESPComponent](IMPORTANT): [sample #36] ESP sampling state: S_PROCESSING 2018-09-11T19:21:27.536Z,1536693687.536 [ESPComponent](IMPORTANT): [sample #36] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-11T19:32:50.736Z,1536694370.736 [ESPComponent](IMPORTANT): [sample #36] ESP sampling state: S_STOPPING 2018-09-11T19:33:15.939Z,1536694395.939 [ESPComponent](IMPORTANT): [sample #36] ESP sampling sequence completed normally. 2018-09-11T19:33:16.336Z,1536694396.336 [ESPComponent](IMPORTANT): [sample #36] ESP log summary report (2 messages): @11:27:03.85 Selecting Cartridge 22 @12:21:09.10 Sampled 1000.0ml 2018-09-11T19:33:17.264Z,1536694397.264 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 32.000000 count completed. 2018-09-11T19:33:23.259Z,1536694403.259 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 33.000000 count . Target temp = 12.000000 degC . 2018-09-11T19:33:24.451Z,1536694404.451 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-11T20:04:41.574Z,1536696281.574 [DAT](FAULT): unknown deviceResponse_: CCERR:006 2018-09-11T20:04:45.232Z,1536696285.232 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2 2018-09-11T20:33:26.831Z,1536698006.831 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 21.866915 m , 11.936395 degC , 0.599400 ug/l . 2018-09-11T20:33:28.339Z,1536698008.339 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-11T20:33:28.339Z,1536698008.339 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-11T20:33:28.427Z,1536698008.427 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-11T20:33:28.570Z,1536698008.570 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-11T20:33:59.536Z,1536698039.536 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-11T20:34:00.339Z,1536698040.339 [ESPComponent](IMPORTANT): [sample #37] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-11T20:34:00.834Z,1536698040.834 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-11T20:34:01.135Z,1536698041.135 [ESPComponent](IMPORTANT): [sample #37] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-11T20:34:01.543Z,1536698041.543 [ESPComponent](IMPORTANT): [sample #37] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-11T20:34:03.536Z,1536698043.536 [ESPComponent](IMPORTANT): [sample #37] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-11T20:34:36.336Z,1536698076.336 [ESPComponent](IMPORTANT): [sample #37] ESP sampling state: S_FILTERING 2018-09-11T20:34:38.736Z,1536698078.736 [ESPComponent](IMPORTANT): [sample #37] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-11T20:47:38.072Z,1536698858.072 [CBIT](IMPORTANT): Beginning ground fault scan 2018-09-11T20:47:48.895Z,1536698868.895 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.117144 CHAN A1 (24V): -0.026437 CHAN A2 (12V): -0.004516 CHAN A3 (5V): -0.002689 CHAN B0 (3.3V): -0.001242 CHAN B1 (3.15aV): -0.001287 CHAN B2 (3.15bV): -0.001134 CHAN B3 (GND): -0.000424 OPEN: 0.004890 Full Scale Calc: 4.765 mA, -1.589 mA 2018-09-11T21:26:59.136Z,1536701219.136 [ESPComponent](IMPORTANT): [sample #37] ESP sampling state: S_PROCESSING 2018-09-11T21:27:01.536Z,1536701221.536 [ESPComponent](IMPORTANT): [sample #37] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-11T21:38:24.735Z,1536701904.735 [ESPComponent](IMPORTANT): [sample #37] ESP sampling state: S_STOPPING 2018-09-11T21:38:49.936Z,1536701929.936 [ESPComponent](IMPORTANT): [sample #37] ESP sampling sequence completed normally. 2018-09-11T21:38:50.336Z,1536701930.336 [ESPComponent](IMPORTANT): [sample #37] ESP log summary report (2 messages): @13:34:01.63 Selecting Cartridge 21 @14:26:43.28 Sampled 1000.0ml 2018-09-11T21:38:51.246Z,1536701931.246 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 33.000000 count completed. 2018-09-11T21:38:57.261Z,1536701937.261 [DriftOrDonutAtIsothermOrDepth:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 34.000000 count . Target temp = 12.000000 degC . 2018-09-11T21:38:58.441Z,1536701938.441 [DriftOrDonutAtIsothermOrDepth:DampDown:A](IMPORTANT): Wait 60.000000 min for the depth undulation to damp down. 2018-09-11T22:16:05.614Z,1536704165.614 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-09-11T22:16:07.352Z,1536704167.352 [BuoyancyServo](FAULT): LCB fault: Current Limiter Activated. 2018-09-11T22:39:00.934Z,1536705540.934 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 21.306248 m , 12.136285 degC , 0.632700 ug/l . 2018-09-11T22:39:02.434Z,1536705542.434 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-09-11T22:39:02.435Z,1536705542.435 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.6.2:10.89.6.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-09-11T22:39:02.507Z,1536705542.507 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-09-11T22:39:02.667Z,1536705542.667 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-09-11T22:39:33.245Z,1536705573.245 [ESPComponent](IMPORTANT): ESP has connected as client 2018-09-11T22:39:34.046Z,1536705574.046 [ESPComponent](IMPORTANT): [sample #38] ESP sampling sequence starting. Sampling state: S_WAITING_INITIAL_PROMPT 2018-09-11T22:39:34.545Z,1536705574.545 [DriftOrDonutAtIsothermOrDepth:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-09-11T22:39:34.844Z,1536705574.844 [ESPComponent](IMPORTANT): [sample #38] ESP sampling state: S_PREPARING_SHOW_LOG 2018-09-11T22:39:35.245Z,1536705575.245 [ESPComponent](IMPORTANT): [sample #38] ESP sampling state: S_PREPARING_SHOW_STATUS 2018-09-11T22:39:37.245Z,1536705577.245 [ESPComponent](IMPORTANT): [sample #38] ESP sampling state: S_LOADING_CARTRIDGE 2018-09-11T22:40:10.045Z,1536705610.045 [ESPComponent](IMPORTANT): [sample #38] ESP sampling state: S_FILTERING 2018-09-11T22:40:12.443Z,1536705612.443 [ESPComponent](IMPORTANT): [sample #38] ESP sampling state: S_WAITING_FOR_PAUSED 2018-09-11T23:28:19.647Z,1536708499.647 [ESPComponent](IMPORTANT): [sample #38] ESP sampling state: S_PROCESSING 2018-09-11T23:28:22.044Z,1536708502.044 [ESPComponent](IMPORTANT): [sample #38] ESP sampling state: S_WAITING_FOR_PROCESSED 2018-09-11T23:28:38.844Z,1536708518.844 [ESPComponent](IMPORTANT): [sample #38] ESP sampling state: S_STOPPING 2018-09-11T23:28:41.246Z,1536708521.246 [ESPComponent](IMPORTANT): [sample #38] ESP log summary report (3 messages): @15:39:35.75 Selecting Cartridge 20 @16:28:03.88 Sampled 1000.0ml @16:28:26.28 Slide::Error in PROCESSING -- Archive Syringe positionErr at 7ul (actually 29ul) 2018-09-11T23:28:42.495Z,1536708522.495 [CTD_Seabird](FAULT): LCB fault: Software Overcurrent. 2018-09-11T23:28:42.668Z,1536708522.668 [MissionManager](IMPORTANT): Started mission Default 2018-09-11T23:28:43.767Z,1536708523.767 [ESPComponent](IMPORTANT): [sample #38] No ESP summary messages. 2018-09-11T23:35:22.888Z,1536708922.888 [DAT](FAULT): unknown deviceResponse_: AGC:80 2018-09-11T23:35:26.515Z,1536708926.515 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2