2018-08-30T21:37:19.868Z,1535665039.868 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-08-30T21:37:19.955Z,1535665039.955 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-08-30T21:37:28.355Z,1535665048.355 [CBIT](CRITICAL): Environmental Failure. Press:14.773869 PSI. Humidity:10%. Temp:29 C. ABORTING MISSION
2018-08-30T21:37:36.307Z,1535665056.307 [CBIT](CRITICAL): Hardware Fault in component: RudderServo
2018-08-30T21:38:00.972Z,1535665080.972 [CBIT](CRITICAL): Hardware Fault in component: ElevatorServo
2018-08-30T21:38:40.626Z,1535665120.626 [SBIT](CRITICAL): SBIT FAILED
2018-08-30T21:37:13.656Z,1535665033.656 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2018-08-30T21:37:18.074Z,1535665038.074 [SBIT](IMPORTANT): git: 2018-08-02-21-g63d70fd
2018-08-30T21:37:18.075Z,1535665038.075 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-08-30T21:37:19.951Z,1535665039.951 [CommandLine](FAULT): Scheduling is paused
2018-08-30T21:37:24.266Z,1535665044.266 [RudderServo](FAULT): Overload Error
2018-08-30T21:37:30.258Z,1535665050.258 [RudderServo](FAULT): Overload Error
2018-08-30T21:37:36.266Z,1535665056.266 [RudderServo](FAULT): Overload Error
2018-08-30T21:37:46.648Z,1535665066.648 [SBIT](IMPORTANT): Beginning Startup BIT
2018-08-30T21:37:46.671Z,1535665066.671 [CBIT](IMPORTANT): Beginning ground fault scan
2018-08-30T21:37:48.746Z,1535665068.746 [ElevatorServo](FAULT): Overload Error
2018-08-30T21:37:54.950Z,1535665074.950 [ElevatorServo](FAULT): Overload Error
2018-08-30T21:37:58.145Z,1535665078.145 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): -0.008879
CHAN A1 (24V): 0.181480
CHAN A2 (12V): -0.004286
CHAN A3 (5V): -0.003116
CHAN B0 (3.3V): -0.001564
CHAN B1 (3.15aV): -0.000791
CHAN B2 (3.15bV): -0.001791
CHAN B3 (GND): -0.000374
OPEN: 0.004827
Full Scale Calc: 4.765 mA, -1.589 mA
2018-08-30T21:38:00.930Z,1535665080.930 [ElevatorServo](FAULT): Overload Error
2018-08-30T21:38:08.783Z,1535665088.783 [CommandLine](IMPORTANT): got command maintain control SpeedControl.propOmegaAction 300.000000 revolution_per_minute
2018-08-30T21:38:15.999Z,1535665095.999 [CommandLine](IMPORTANT): got command maintain clear
2018-08-30T21:38:21.782Z,1535665101.782 [CommandLine](IMPORTANT): got command show variable thrusterServo.component
2018-08-30T21:38:22.252Z,1535665102.252 [CommandLine](IMPORTANT): ThrusterServo.component_voltage (volt)
2018-08-30T21:38:22.253Z,1535665102.253 [CommandLine](IMPORTANT): ThrusterServo.component_avgVoltage (volt)
2018-08-30T21:38:22.253Z,1535665102.253 [CommandLine](IMPORTANT): ThrusterServo.component_current (milliampere)
2018-08-30T21:38:22.258Z,1535665102.258 [CommandLine](IMPORTANT): ThrusterServo.component_avgCurrent (milliampere)
2018-08-30T21:38:26.540Z,1535665106.540 [SBIT](FAULT): Control surface position failure.
2018-08-30T21:38:40.210Z,1535665120.210 [SBIT](FAULT): Control surface position failure.
2018-08-30T21:38:40.683Z,1535665120.683 [CommandLine](IMPORTANT): got command configSet list
2018-08-30T21:38:40.684Z,1535665120.684 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2018-08-30T21:38:40.685Z,1535665120.685 [CommandLine](IMPORTANT): ThrusterServo.currLimit=20 percent;

2018-08-30T21:38:40.685Z,1535665120.685 [CommandLine](IMPORTANT): ThrusterServo.powerOnTimeout=5 second;

2018-08-30T21:38:40.995Z,1535665120.995 [MissionManager](IMPORTANT): Started mission Startup
2018-08-30T21:38:49.215Z,1535665129.215 [CommandLine](IMPORTANT): got command show variable ThrusterServo.component
2018-08-30T21:38:49.552Z,1535665129.552 [CommandLine](IMPORTANT): ThrusterServo.component_voltage (volt)
2018-08-30T21:38:49.553Z,1535665129.553 [CommandLine](IMPORTANT): ThrusterServo.component_avgVoltage (volt)
2018-08-30T21:38:49.553Z,1535665129.553 [CommandLine](IMPORTANT): ThrusterServo.component_current (milliampere)
2018-08-30T21:38:49.555Z,1535665129.555 [CommandLine](IMPORTANT): ThrusterServo.component_avgCurrent (milliampere)
2018-08-30T21:39:06.815Z,1535665146.815 [CommandLine](IMPORTANT): got command report touch ThrusterServo.component_current
2018-08-30T21:39:06.816Z,1535665146.816 [CommandLine](IMPORTANT): got command report touch ThrusterServo.component_avgCurrent
2018-08-30T21:39:26.849Z,1535665166.849 [CommandLine](IMPORTANT): got command maintain control SpeedControl.propOmegaAction 300.000000 revolution_per_minute
2018-08-30T21:40:25.338Z,1535665225.338 [ThrusterServo](FAULT): Overload Error
2018-08-30T21:40:41.831Z,1535665241.831 [MissionManager](IMPORTANT): Started mission Default
2018-08-30T21:40:52.854Z,1535665252.854 [ThrusterServo](FAULT): Overload Error
2018-08-30T21:41:47.615Z,1535665307.615 [CommandLine](IMPORTANT): got command restart application