2020-07-01T06:46:30.524Z,1593585990.524 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2020-07-01T06:46:36.487Z,1593585996.487 [SBIT](IMPORTANT): git: 2020-06-09-116-g9a4a6a1
2020-07-01T06:46:36.488Z,1593585996.488 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2020-07-01T06:46:36.968Z,1593585996.968 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-01T06:46:37.983Z,1593585997.983 [RudderServo](FAULT): Rudder failed to initialize
2020-07-01T06:46:57.124Z,1593586017.124 [SBIT](IMPORTANT): Beginning Startup BIT
2020-07-01T06:46:57.128Z,1593586017.128 [CBIT](IMPORTANT): Beginning ground fault scan
2020-07-01T06:47:08.045Z,1593586028.045 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003418
CHAN A1 (24V): -0.026493
CHAN A2 (12V): -0.004375
CHAN A3 (5V): -0.002342
CHAN B0 (3.3V): -0.001632
CHAN B1 (3.15aV): -0.001344
CHAN B2 (3.15bV): -0.001420
CHAN B3 (GND): -0.000674
OPEN: 0.005695
Full Scale Calc: 4.765 mA, -1.589 mA
2020-07-01T06:47:37.091Z,1593586057.091 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-01T06:47:40.783Z,1593586060.783 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-01T06:47:51.258Z,1593586071.258 [SBIT](IMPORTANT): SBIT PASSED
2020-07-01T06:47:51.258Z,1593586071.258 [SBIT](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2020-07-01T06:47:51.259Z,1593586071.259 [SBIT](IMPORTANT): AcousticModem_Benthos_ATM900.loadAtStartup=0 bool;

2020-07-01T06:47:51.259Z,1593586071.259 [SBIT](IMPORTANT): DropWeight.loadAtStartup=0 bool;

2020-07-01T06:47:51.260Z,1593586071.260 [SBIT](IMPORTANT): Express linearApproximation Rowe_600.height_above_sea_floor 5.000000 meter;

2020-07-01T06:47:51.260Z,1593586071.260 [SBIT](IMPORTANT): Express linearApproximation height_above_sea_floor 5.000000 meter;

2020-07-01T06:47:51.260Z,1593586071.260 [SBIT](IMPORTANT): Rowe_600.loadAtStartup=0 bool;

2020-07-01T06:47:51.260Z,1593586071.260 [SBIT](IMPORTANT): VerticalControl.buoyancyNeutral=250 cubic_centimeter;

2020-07-01T06:47:51.260Z,1593586071.260 [SBIT](IMPORTANT): VerticalControl.massDefault=0 centimeter;

2020-07-01T06:47:51.260Z,1593586071.260 [SBIT](IMPORTANT): WetLabsBB2FL.loadAtStartup=1 bool;

2020-07-01T06:47:51.677Z,1593586071.677 [MissionManager](IMPORTANT): Started mission Startup
2020-07-01T06:48:40.940Z,1593586120.940 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-01T06:48:44.664Z,1593586124.664 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-01T06:49:44.784Z,1593586184.784 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-01T06:49:48.487Z,1593586188.487 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-01T06:49:52.504Z,1593586192.504 [MissionManager](IMPORTANT): Started mission Default
2020-07-01T06:50:16.561Z,1593586216.561 [CommandLine](IMPORTANT): got command get PowerOnly.sampleTime
2020-07-01T06:50:16.561Z,1593586216.561 [CommandLine](IMPORTANT): PowerOnly.sampleTime 3600.000000 s
2020-07-01T06:50:40.089Z,1593586240.089 [CommandLine](IMPORTANT): got command configSet PowerOnly.sampleTime 20.000000 second
2020-07-01T06:50:48.607Z,1593586248.607 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-01T06:50:52.271Z,1593586252.271 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-01T06:50:58.981Z,1593586258.981 [CommandLine](IMPORTANT): got command show stack
2020-07-01T06:50:58.981Z,1593586258.981 [CommandLine](IMPORTANT): Behavior Stack:

2020-07-01T06:50:58.981Z,1593586258.981 [Default](IMPORTANT): Priority 0: Default:B.GoToSurface
2020-07-01T06:50:58.982Z,1593586258.982 [Default:CheckIn](IMPORTANT): Priority 1: Default:CheckIn:Read_GPS
2020-07-01T06:51:06.429Z,1593586266.429 [CommandLine](IMPORTANT): got command run ./Missions/test.xml
2020-07-01T06:51:06.537Z,1593586266.537 [CommandLine](IMPORTANT): Running ./Missions/test.xml
2020-07-01T06:51:06.818Z,1593586266.818 [MissionManager](IMPORTANT): Started mission Default
2020-07-01T06:51:52.433Z,1593586312.433 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-01T06:51:56.096Z,1593586316.096 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-01T06:52:16.666Z,1593586336.666 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2020-07-01T06:52:36.736Z,1593586356.736 [CommandLine](IMPORTANT): got command stop
2020-07-01T06:52:36.737Z,1593586356.737 [CommandLine](IMPORTANT): Scheduling is paused
2020-07-01T06:52:37.292Z,1593586357.292 [MissionManager](IMPORTANT): Started mission Default
2020-07-01T06:52:50.999Z,1593586370.999 [CommandLine](IMPORTANT): got command failComponent hardware PowerOnly
2020-07-01T06:52:50.000Z,1593586371.000 [CommandLine](IMPORTANT): PowerOnly failureMode is Hardware Fault
2020-07-01T06:52:56.300Z,1593586376.300 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-01T06:52:59.000Z,1593586380.000 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-01T06:54:00.113Z,1593586440.113 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-01T06:54:03.811Z,1593586443.811 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-01T06:55:03.940Z,1593586503.940 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-01T06:55:03.998Z,1593586503.998 [CBIT](FAULT): Communications Fault in component: DAT
2020-07-01T06:57:15.222Z,1593586635.222 [NAL9602](FAULT): GPS failed to acquire within timeout.
2020-07-01T06:57:51.216Z,1593586671.216 [CommandLine](IMPORTANT): got command restart application
2020-07-01T06:57:57.355Z,1593586677.355 [CBIT](FAULT): Humidity exceeds 50% of running average: Humidity:2285304 %. Average:305442.031250