2020-06-30T18:53:00.310Z,1593543180.310 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2020-06-30T18:53:04.429Z,1593543184.429 [SBIT](IMPORTANT): git: 2020-06-09-114-g1451e00
2020-06-30T18:53:04.430Z,1593543184.430 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2020-06-30T18:53:04.469Z,1593543184.469 [CBIT](CRITICAL): LAST REBOOT DUE TO WATCHDOG TIMER RESET.
2020-06-30T18:53:04.809Z,1593543184.809 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-06-30T18:53:04.972Z,1593543184.972 [CommandLine](FAULT): Scheduling is paused
2020-06-30T18:53:05.901Z,1593543185.901 [RudderServo](FAULT): Rudder failed to initialize
2020-06-30T18:53:25.075Z,1593543205.075 [SBIT](IMPORTANT): Beginning Startup BIT
2020-06-30T18:53:25.079Z,1593543205.079 [CBIT](IMPORTANT): Beginning ground fault scan
2020-06-30T18:53:35.968Z,1593543215.968 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.005623
CHAN A1 (24V): -0.026947
CHAN A2 (12V): -0.004404
CHAN A3 (5V): -0.003179
CHAN B0 (3.3V): -0.001314
CHAN B1 (3.15aV): -0.001359
CHAN B2 (3.15bV): -0.000944
CHAN B3 (GND): -0.000325
OPEN: 0.006038
Full Scale Calc: 4.765 mA, -1.589 mA
2020-06-30T18:54:05.025Z,1593543245.025 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-06-30T18:54:08.773Z,1593543248.773 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-06-30T18:54:19.179Z,1593543259.179 [SBIT](IMPORTANT): SBIT PASSED
2020-06-30T18:54:19.179Z,1593543259.179 [SBIT](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2020-06-30T18:54:19.180Z,1593543259.180 [SBIT](IMPORTANT): AcousticModem_Benthos_ATM900.loadAtStartup=0 bool;

2020-06-30T18:54:19.180Z,1593543259.180 [SBIT](IMPORTANT): DropWeight.loadAtStartup=0 bool;

2020-06-30T18:54:19.180Z,1593543259.180 [SBIT](IMPORTANT): Express linearApproximation Rowe_600.height_above_sea_floor 5.000000 meter;

2020-06-30T18:54:19.180Z,1593543259.180 [SBIT](IMPORTANT): Express linearApproximation height_above_sea_floor 5.000000 meter;

2020-06-30T18:54:19.180Z,1593543259.180 [SBIT](IMPORTANT): Rowe_600.loadAtStartup=0 bool;

2020-06-30T18:54:19.180Z,1593543259.180 [SBIT](IMPORTANT): VerticalControl.buoyancyNeutral=250 cubic_centimeter;

2020-06-30T18:54:19.181Z,1593543259.181 [SBIT](IMPORTANT): VerticalControl.massDefault=0 centimeter;

2020-06-30T18:54:19.181Z,1593543259.181 [SBIT](IMPORTANT): WetLabsBB2FL.loadAtStartup=1 bool;

2020-06-30T18:54:19.608Z,1593543259.608 [MissionManager](IMPORTANT): Started mission Startup
2020-06-30T18:55:08.873Z,1593543308.873 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-06-30T18:55:12.590Z,1593543312.590 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-06-30T18:56:12.692Z,1593543372.692 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-06-30T18:56:16.349Z,1593543376.349 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-06-30T18:56:20.394Z,1593543380.394 [MissionManager](IMPORTANT): Started mission Default
2020-06-30T18:57:16.527Z,1593543436.527 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-06-30T18:57:20.234Z,1593543440.234 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-06-30T18:58:20.362Z,1593543500.362 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-06-30T18:58:24.018Z,1593543504.018 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-06-30T18:58:45.818Z,1593543525.818 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2020-06-30T18:59:05.082Z,1593543545.082 [DataOverHttps](IMPORTANT): SBD MTMSN=20200630T185125
2020-06-30T18:59:13.790Z,1593543553.790 [CommandLine](IMPORTANT): got command restart system