2019-10-04T18:28:01.401Z,1570213681.401 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2019-10-04T18:28:06.663Z,1570213686.663 [SBIT](IMPORTANT): git: 2019-10-03_bsd
2019-10-04T18:28:06.663Z,1570213686.663 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2019-10-04T18:28:06.663Z,1570213686.663 [SBIT](IMPORTANT): Kernel Version:#1 PREEMPT Thu Feb 21 11:17:40 PST 2019
2019-10-04T18:28:08.138Z,1570213688.138 [RudderServo](FAULT): Rudder failed to initialize
2019-10-04T18:28:48.333Z,1570213728.333 [SBIT](IMPORTANT): Beginning Startup BIT
2019-10-04T18:28:48.360Z,1570213728.360 [CBIT](IMPORTANT): Beginning ground fault scan
2019-10-04T18:28:59.081Z,1570213739.081 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): -0.016766
CHAN A1 (24V): -0.109490
CHAN A2 (12V): -0.007242
CHAN A3 (5V): -0.001883
CHAN B0 (3.3V): -0.000287
CHAN B1 (3.15aV): -0.000135
CHAN B2 (3.15bV): -0.000446
CHAN B3 (GND): 0.001715
OPEN: -0.003929
Full Scale Calc: 4.765 mA, -1.589 mA
2019-10-04T18:29:42.452Z,1570213782.452 [SBIT](IMPORTANT): SBIT PASSED
2019-10-04T18:29:42.487Z,1570213782.487 [CommandLine](IMPORTANT): got command configSet list
2019-10-04T18:29:42.487Z,1570213782.487 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2019-10-04T18:29:42.488Z,1570213782.488 [CommandLine](IMPORTANT): CBIT.gf24Offset=143 microampere;

2019-10-04T18:29:42.488Z,1570213782.488 [CommandLine](IMPORTANT): DAT.loadAtStartup=0 bool;

2019-10-04T18:29:42.488Z,1570213782.488 [CommandLine](IMPORTANT): Express none BackSeatDriver.biolum_jelly_proxy;

2019-10-04T18:29:42.488Z,1570213782.488 [CommandLine](IMPORTANT): Express none RDI_Pathfinder.height_above_sea_floor;

2019-10-04T18:29:42.488Z,1570213782.488 [CommandLine](IMPORTANT): Express linearApproximation Tracking.range_to_contact 10.000000 meter;

2019-10-04T18:29:42.488Z,1570213782.488 [CommandLine](IMPORTANT): Express none WetLabsUBAT.biolum_potential;

2019-10-04T18:29:42.489Z,1570213782.489 [CommandLine](IMPORTANT): Express none WetLabsUBAT.flow_rate;

2019-10-04T18:29:42.489Z,1570213782.489 [CommandLine](IMPORTANT): Express linearApproximation height_above_sea_floor 10.000000 meter;

2019-10-04T18:29:42.489Z,1570213782.489 [CommandLine](IMPORTANT): Normal linearApproximation BackSeatDriver.biolum_jelly_proxy 1000000.000000 none;

2019-10-04T18:29:42.489Z,1570213782.489 [CommandLine](IMPORTANT): Normal linearApproximation WetLabsUBAT.biolum_potential 1000000.000000 none;

2019-10-04T18:29:42.489Z,1570213782.489 [CommandLine](IMPORTANT): RDI_Pathfinder.loadAtStartup=0 bool;

2019-10-04T18:29:42.489Z,1570213782.489 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=191 cubic_centimeter;

2019-10-04T18:29:42.489Z,1570213782.489 [CommandLine](IMPORTANT): VerticalControl.massDefault=5.5 millimeter;

2019-10-04T18:29:42.847Z,1570213782.847 [MissionManager](IMPORTANT): Started mission Startup
2019-10-04T18:31:43.635Z,1570213903.635 [MissionManager](IMPORTANT): Started mission Default
2019-10-04T18:37:51.224Z,1570214271.224 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 6.119821 min 
2019-10-04T18:38:11.916Z,1570214291.916 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=2226, MT Status=1, MTMSN=78
2019-10-04T18:38:12.694Z,1570214292.694 [CommandLine](IMPORTANT): got command configSet WetLabsUBAT.loadAtStartup 0.000000 bool
2019-10-04T18:38:12.695Z,1570214292.695 [CommandLine](FAULT): configSet WetLabsUBAT.loadAtStartup without persist will have no effect.
2019-10-04T18:44:17.016Z,1570214657.016 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 12.549843 min 
2019-10-04T18:45:42.636Z,1570214742.636 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=2232, MT Status=1, MTMSN=79
2019-10-04T18:45:43.331Z,1570214743.331 [CommandLine](IMPORTANT): got command ! echo i > /dev/loadC1
2019-10-04T18:47:18.677Z,1570214838.677 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=2233, MT Status=1, MTMSN=80
2019-10-04T18:47:19.387Z,1570214839.387 [CommandLine](IMPORTANT): got command gfscan
2019-10-04T18:47:19.542Z,1570214839.542 [CBIT](IMPORTANT): Beginning ground fault scan
2019-10-04T18:47:30.284Z,1570214850.284 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): -0.015993
CHAN A1 (24V): -0.166910
CHAN A2 (12V): -0.007432
CHAN A3 (5V): -0.002454
CHAN B0 (3.3V): -0.000055
CHAN B1 (3.15aV): 0.000642
CHAN B2 (3.15bV): -0.000216
CHAN B3 (GND): 0.002025
OPEN: 0.004512
Full Scale Calc: 4.765 mA, -1.589 mA
2019-10-04T18:53:02.973Z,1570215182.973 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.315898 min 
2019-10-04T19:00:30.504Z,1570215630.504 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 28.774591 min 
2019-10-04T19:00:49.588Z,1570215649.588 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=2241, MT Status=1, MTMSN=81
2019-10-04T19:00:50.620Z,1570215650.620 [CommandLine](IMPORTANT): got command get CBIT.gf24Offset
2019-10-04T19:00:50.621Z,1570215650.621 [CommandLine](IMPORTANT): CBIT.gf24Offset 143.000000 uA
2019-10-04T19:06:51.035Z,1570216011.035 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 35.116846 min 
2019-10-04T19:08:20.751Z,1570216100.751 [NAL9602](FAULT): Verify xmit timeout failure.
2019-10-04T19:08:21.563Z,1570216101.563 [NAL9602](FAULT): LCB fault:  Current Limiter Activated.
2019-10-04T19:10:10.111Z,1570216210.111 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=2248, MT Status=1, MTMSN=82
2019-10-04T19:10:10.911Z,1570216210.911 [CommandLine](IMPORTANT): got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 12 hour;set profile_station.NeedCommsTime 30 minute;set profile_station.Lat 36.712110 degree;set profile_station.Lon -122.187028 degree" 3snrs 1 2.000000
2019-10-04T19:10:10.911Z,1570216210.911 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=3snrs
2019-10-04T19:10:10.912Z,1570216210.912 [CommandLine](IMPORTANT): Scheduled #1 (#1 of 2 with id='3snrs'): "load Science/profile_station.xml;set profile_station.MissionTimeout 12 hour;set profile_station.NeedCommsTime 30 minute;set profile_station.Lat 36.712110 degree;set profile_station.Lon -122.187028 degree" ASAP
2019-10-04T19:10:26.430Z,1570216226.430 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=2249, MT Status=1, MTMSN=83
2019-10-04T19:10:27.035Z,1570216227.035 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.Radius 2000 meter;run " 3snrs 2 2.000000
2019-10-04T19:10:27.036Z,1570216227.036 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=3snrs
2019-10-04T19:10:27.036Z,1570216227.036 [CommandLine](IMPORTANT): Scheduled #2 (#2 of 2 with id='3snrs'): "set profile_station.Radius 2000 meter;run " ASAP
2019-10-04T19:10:27.220Z,1570216227.220 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml
2019-10-04T19:10:28.908Z,1570216228.908 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml
2019-10-04T19:10:36.480Z,1570216236.480 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 12.000000 hour
2019-10-04T19:10:36.481Z,1570216236.481 [CommandLine](IMPORTANT): got command set profile_station.NeedCommsTime 30.000000 minute
2019-10-04T19:10:36.486Z,1570216236.486 [CommandLine](IMPORTANT): got command set profile_station.Lat 36.712109 degree
2019-10-04T19:10:36.486Z,1570216236.486 [CommandLine](IMPORTANT): got command set profile_station.Lon -122.187027 degree
2019-10-04T19:10:38.181Z,1570216238.181 [CommandLine](IMPORTANT): got command set profile_station.Radius 2000.000000 meter
2019-10-04T19:10:38.181Z,1570216238.181 [CommandLine](IMPORTANT): got command run 
2019-10-04T19:10:38.184Z,1570216238.184 [CommandLine](IMPORTANT): Running 
2019-10-04T19:10:38.481Z,1570216238.481 [MissionManager](IMPORTANT): Started mission profile_station
2019-10-05T00:05:27.556Z,1570233927.556 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=2285, MT Status=1, MTMSN=84
2019-10-05T00:05:28.284Z,1570233928.284 [CommandLine](IMPORTANT): got command configSet WetLabsUBAT.loadAtStartup 1.000000 bool
2019-10-05T00:05:28.285Z,1570233928.285 [CommandLine](FAULT): configSet WetLabsUBAT.loadAtStartup without persist will have no effect.
2019-10-05T00:47:30.546Z,1570236450.546 [CBIT](IMPORTANT): Beginning ground fault scan
2019-10-05T00:47:41.475Z,1570236461.475 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): -0.018532
CHAN A1 (24V): -0.167151
CHAN A2 (12V): -0.007061
CHAN A3 (5V): -0.001948
CHAN B0 (3.3V): 0.000191
CHAN B1 (3.15aV): -0.000014
CHAN B2 (3.15bV): -0.000476
CHAN B3 (GND): 0.002958
OPEN: 0.004276
Full Scale Calc: 4.765 mA, -1.589 mA
2019-10-05T02:36:11.125Z,1570242971.125 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=2306, MT Status=1, MTMSN=85
2019-10-05T02:36:11.839Z,1570242971.839 [CommandLine](IMPORTANT): got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 12 hour;set profile_station.NeedCommsTime 30 minute;set profile_station.Lat 36.712110 degree;set profile_station.Lon -122.187028 degree" 3t7af 1 2.000000
2019-10-05T02:36:11.840Z,1570242971.840 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=3t7af
2019-10-05T02:36:11.841Z,1570242971.841 [CommandLine](IMPORTANT): Scheduled #3 (#1 of 2 with id='3t7af'): "load Science/profile_station.xml;set profile_station.MissionTimeout 12 hour;set profile_station.NeedCommsTime 30 minute;set profile_station.Lat 36.712110 degree;set profile_station.Lon -122.187028 degree" ASAP
2019-10-05T02:36:26.722Z,1570242986.722 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=2307, MT Status=1, MTMSN=86
2019-10-05T02:36:27.280Z,1570242987.280 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.Radius 2000 meter;run " 3t7af 2 2.000000
2019-10-05T02:36:27.281Z,1570242987.281 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=3t7af
2019-10-05T02:36:27.281Z,1570242987.281 [CommandLine](IMPORTANT): Scheduled #4 (#2 of 2 with id='3t7af'): "set profile_station.Radius 2000 meter;run " ASAP
2019-10-05T02:36:27.398Z,1570242987.398 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml
2019-10-05T02:36:29.001Z,1570242989.001 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml
2019-10-05T02:36:29.186Z,1570242989.186 [MissionManager](IMPORTANT): Started mission Default
2019-10-05T02:36:35.783Z,1570242995.783 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 12.000000 hour
2019-10-05T02:36:35.784Z,1570242995.784 [CommandLine](IMPORTANT): got command set profile_station.NeedCommsTime 30.000000 minute
2019-10-05T02:36:35.785Z,1570242995.785 [CommandLine](IMPORTANT): got command set profile_station.Lat 36.712109 degree
2019-10-05T02:36:35.786Z,1570242995.786 [CommandLine](IMPORTANT): got command set profile_station.Lon -122.187027 degree
2019-10-05T02:36:37.484Z,1570242997.484 [CommandLine](IMPORTANT): got command set profile_station.Radius 2000.000000 meter
2019-10-05T02:36:37.485Z,1570242997.485 [CommandLine](IMPORTANT): got command run 
2019-10-05T02:36:37.486Z,1570242997.486 [CommandLine](IMPORTANT): Running 
2019-10-05T02:36:37.655Z,1570242997.655 [MissionManager](IMPORTANT): Started mission profile_station
2019-10-05T02:41:53.674Z,1570243313.674 [BackSeatDriver](FAULT): Failed to receive device response within the specified timeout.
2019-10-05T02:47:26.002Z,1570243646.002 [BackSeatDriver](FAULT): Failed to receive device response within the specified timeout.
2019-10-05T02:52:58.342Z,1570243978.342 [BackSeatDriver](FAULT): Failed to receive device response within the specified timeout.
2019-10-05T02:58:30.666Z,1570244310.666 [BackSeatDriver](FAULT): Failed to receive device response within the specified timeout.
2019-10-05T03:04:02.993Z,1570244642.993 [BackSeatDriver](FAULT): Failed to receive device response within the specified timeout.
2019-10-05T03:04:03.284Z,1570244643.284 [CBIT](FAULT): Communications Fault in component: BackSeatDriver
2019-10-05T03:11:33.697Z,1570245093.697 [BackSeatDriver](FAULT): Failed to receive device response within the specified timeout.
2019-10-05T03:17:06.017Z,1570245426.017 [BackSeatDriver](FAULT): Failed to receive device response within the specified timeout.
2019-10-05T03:22:38.338Z,1570245758.338 [BackSeatDriver](FAULT): Failed to receive device response within the specified timeout.
2019-10-05T03:28:10.657Z,1570246090.657 [BackSeatDriver](FAULT): Failed to receive device response within the specified timeout.
2019-10-05T03:28:48.938Z,1570246128.938 [BackSeatDriver](IMPORTANT): photon: running biolum proxies application.
2019-10-05T04:15:46.289Z,1570248946.289 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=2324, MT Status=1, MTMSN=87
2019-10-05T04:15:46.811Z,1570248946.811 [CommandLine](IMPORTANT): got command ! echo i > /dev/loadC4
2019-10-05T04:17:41.811Z,1570249061.811 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=2325, MT Status=1, MTMSN=88
2019-10-05T04:17:43.380Z,1570249063.380 [CommandLine](IMPORTANT): got command get WetLabsUBAT.component_current
2019-10-05T04:17:43.381Z,1570249063.381 [CommandLine](IMPORTANT): WetLabsUBAT.component_current 638.580017 mA
2019-10-05T04:20:47.066Z,1570249247.066 [BackSeatDriver](FAULT): Failed to receive device response within the specified timeout.
2019-10-05T04:20:47.197Z,1570249247.197 [CBIT](FAULT): Communications Fault in component: BackSeatDriver
2019-10-05T04:23:17.803Z,1570249397.803 [BackSeatDriver](IMPORTANT): photon: running biolum proxies application.
2019-10-05T05:56:43.822Z,1570255003.822 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=2339, MT Status=1, MTMSN=89
2019-10-05T05:56:45.675Z,1570255005.675 [CommandLine](IMPORTANT): got command configSet 
2019-10-05T05:56:45.675Z,1570255005.675 [CommandLine](FAULT): Incomplete syntax. Try: help configSet
2019-10-05T05:57:34.753Z,1570255054.753 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=2340, MT Status=1, MTMSN=90
2019-10-05T05:57:36.754Z,1570255056.754 [CommandLine](IMPORTANT): got command configSet Express linearApproximation BackSeatDriver.biolum_dinoflagellate_proxy 12999999488.000000 none persist
2019-10-05T06:31:21.131Z,1570257081.131 [ThrusterServo](FAULT): Invalid EZ Servo response:""
2019-10-05T06:47:41.906Z,1570258061.906 [CBIT](IMPORTANT): Beginning ground fault scan
2019-10-05T06:47:53.741Z,1570258073.741 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.008341
CHAN A1 (24V): -0.171403
CHAN A2 (12V): 0.009286
CHAN A3 (5V): 0.002570
CHAN B0 (3.3V): 0.000344
CHAN B1 (3.15aV): 0.000796
CHAN B2 (3.15bV): 0.000317
CHAN B3 (GND): -0.000671
OPEN: 0.005347
Full Scale Calc: 4.765 mA, -1.589 mA
2019-10-05T06:52:56.294Z,1570258376.294 [Radio_Surface](FAULT): LCB fault:  Invalid Command. Hardware Overcurrent Shutdown.
2019-10-05T07:07:10.250Z,1570259230.250 [ThrusterServo](FAULT): Invalid EZ Servo response:""
2019-10-05T09:47:56.614Z,1570268876.614 [RudderServo](FAULT): Invalid EZ Servo response:""
2019-10-05T11:03:40.886Z,1570273420.886 [ThrusterServo](FAULT): Unknown EZ Servo Error: 10
2019-10-05T12:47:54.094Z,1570279674.094 [CBIT](IMPORTANT): Beginning ground fault scan
2019-10-05T12:48:04.996Z,1570279684.996 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.000638
CHAN A1 (24V): -0.168558
CHAN A2 (12V): 0.008031
CHAN A3 (5V): 0.003681
CHAN B0 (3.3V): 0.003540
CHAN B1 (3.15aV): 0.003009
CHAN B2 (3.15bV): 0.002945
CHAN B3 (GND): 0.000880
OPEN: 0.005400
Full Scale Calc: 4.765 mA, -1.589 mA
2019-10-05T14:36:38.311Z,1570286198.311 [MissionManager](IMPORTANT): Started mission Default
2019-10-05T14:36:38.938Z,1570286198.938 [WetLabsUBAT](FAULT): LCB fault:  Software Overcurrent.
2019-10-05T14:36:54.106Z,1570286214.106 [BackSeatDriver](FAULT): LCB fault:  Software Overcurrent.
2019-10-05T14:47:43.896Z,1570286863.896 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=2415, MT Status=1, MTMSN=91
2019-10-05T14:47:44.611Z,1570286864.611 [CommandLine](IMPORTANT): got command configSet WetLabsUBAT.loadAtStartup 0.000000 bool
2019-10-05T14:47:44.612Z,1570286864.612 [CommandLine](FAULT): configSet WetLabsUBAT.loadAtStartup without persist will have no effect.
2019-10-05T14:48:04.969Z,1570286884.969 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=2416, MT Status=1, MTMSN=92
2019-10-05T14:48:05.767Z,1570286885.767 [CommandLine](IMPORTANT): got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 12 hour;set profile_station.NeedCommsTime 30 minute;set profile_station.Lat 36.712110 degree;set profile_station.Lon -122.187028 degree" 3u6cc 1 2.000000
2019-10-05T14:48:05.768Z,1570286885.768 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=3u6cc
2019-10-05T14:48:05.768Z,1570286885.768 [CommandLine](IMPORTANT): Scheduled #5 (#1 of 2 with id='3u6cc'): "load Science/profile_station.xml;set profile_station.MissionTimeout 12 hour;set profile_station.NeedCommsTime 30 minute;set profile_station.Lat 36.712110 degree;set profile_station.Lon -122.187028 degree" ASAP
2019-10-05T14:48:17.797Z,1570286897.797 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=2417, MT Status=1, MTMSN=93
2019-10-05T14:48:18.411Z,1570286898.411 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.Radius 2000 meter;run " 3u6cc 2 2.000000
2019-10-05T14:48:18.412Z,1570286898.412 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=3u6cc
2019-10-05T14:48:18.413Z,1570286898.413 [CommandLine](IMPORTANT): Scheduled #6 (#2 of 2 with id='3u6cc'): "set profile_station.Radius 2000 meter;run " ASAP
2019-10-05T14:48:18.540Z,1570286898.540 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml
2019-10-05T14:48:20.007Z,1570286900.007 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml
2019-10-05T14:48:26.511Z,1570286906.511 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 12.000000 hour
2019-10-05T14:48:26.512Z,1570286906.512 [CommandLine](IMPORTANT): got command set profile_station.NeedCommsTime 30.000000 minute
2019-10-05T14:48:26.512Z,1570286906.512 [CommandLine](IMPORTANT): got command set profile_station.Lat 36.712109 degree
2019-10-05T14:48:26.513Z,1570286906.513 [CommandLine](IMPORTANT): got command set profile_station.Lon -122.187027 degree
2019-10-05T14:48:28.202Z,1570286908.202 [CommandLine](IMPORTANT): got command set profile_station.Radius 2000.000000 meter
2019-10-05T14:48:28.203Z,1570286908.203 [CommandLine](IMPORTANT): got command run 
2019-10-05T14:48:28.204Z,1570286908.204 [CommandLine](IMPORTANT): Running 
2019-10-05T14:48:28.305Z,1570286908.305 [MissionManager](IMPORTANT): Started mission profile_station
2019-10-05T14:49:54.680Z,1570286994.680 [DataOverHttps](IMPORTANT): Could not stat file Logs/20191004T182755/Express0125.lzma
2019-10-05T14:49:54.680Z,1570286994.680 [DataOverHttps](CRITICAL): Could not open file Logs/20191004T182755/Express0125.lzma
2019-10-05T14:49:55.024Z,1570286995.024 [CommandLine](FAULT): Scheduling is paused
2019-10-05T14:49:55.596Z,1570286995.596 [MissionManager](IMPORTANT): Started mission Default
2019-10-05T14:56:22.479Z,1570287382.479 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 6.441194 min 
2019-10-05T15:02:08.088Z,1570287728.088 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 12.201405 min 
2019-10-05T15:02:34.826Z,1570287754.826 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=2426, MT Status=1, MTMSN=94
2019-10-05T15:02:35.327Z,1570287755.327 [CommandLine](IMPORTANT): got command restart application