2017-05-01T19:05:26.887Z,1493665526.887 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg 2017-05-01T19:05:34.861Z,1493665534.861 [SBIT](IMPORTANT): git: 2017-04-19-5-g443ab08 2017-05-01T19:05:34.866Z,1493665534.866 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL. 2017-05-01T19:05:37.053Z,1493665537.053 [BuoyancyServo](FAULT): Buoyancy failed to initialize 2017-05-01T19:05:41.074Z,1493665541.074 [RudderServo](FAULT): Overload Error 2017-05-01T19:05:47.077Z,1493665547.077 [RudderServo](FAULT): Overload Error 2017-05-01T19:05:53.069Z,1493665553.069 [RudderServo](FAULT): Overload Error 2017-05-01T19:05:53.110Z,1493665553.110 [CBIT](CRITICAL): Hardware Fault in component: RudderServo 2017-05-01T19:05:53.454Z,1493665553.454 [CommandLine](FAULT): Scheduling is paused 2017-05-01T19:06:34.560Z,1493665594.560 [SBIT](IMPORTANT): Beginning Startup BIT 2017-05-01T19:06:34.585Z,1493665594.585 [CBIT](IMPORTANT): Beginning ground fault scan 2017-05-01T19:06:45.178Z,1493665605.178 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.009433 CHAN A1 (24V): 4.604929 CHAN A2 (12V): -0.141817 CHAN A3 (5V): 4.754929 CHAN B0 (3.3V): -0.010660 CHAN B1 (3.15aV): 4.768929 CHAN B2 (3.15bV): 0.004798 CHAN B3 (GND): -0.001791 OPEN: 0.010032 Full Scale Calc: 4.765 mA, -1.589 mA 2017-05-01T19:07:14.091Z,1493665634.091 [SBIT](FAULT): Control surface position failure. 2017-05-01T19:07:27.842Z,1493665647.842 [SBIT](FAULT): Control surface position failure. 2017-05-01T19:07:28.242Z,1493665648.242 [SBIT](CRITICAL): SBIT FAILED 2017-05-01T19:07:28.618Z,1493665648.618 [MissionManager](IMPORTANT): Started mission Startup 2017-05-01T19:07:35.069Z,1493665655.069 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:08:49.394Z,1493665729.394 [MissionManager](IMPORTANT): Started mission Default 2017-05-01T19:09:37.349Z,1493665777.349 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:11:39.571Z,1493665899.571 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:13:43.921Z,1493666023.921 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:15:46.732Z,1493666146.732 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:15:46.967Z,1493666146.967 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2017-05-01T19:19:09.798Z,1493666349.798 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.332785 min 2017-05-01T19:20:57.861Z,1493666457.861 [RudderServo](FAULT): Overload Error 2017-05-01T19:21:03.861Z,1493666463.861 [RudderServo](FAULT): Overload Error 2017-05-01T19:21:09.849Z,1493666469.849 [RudderServo](FAULT): Overload Error 2017-05-01T19:21:09.890Z,1493666469.890 [CBIT](CRITICAL): Hardware Fault in component: RudderServo 2017-05-01T19:27:19.775Z,1493666839.775 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 18.499534 min 2017-05-01T19:27:47.604Z,1493666867.604 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:29:49.840Z,1493666989.840 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:31:52.216Z,1493667112.216 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:33:55.033Z,1493667235.033 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:35:23.570Z,1493667323.570 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 26.562317 min 2017-05-01T19:36:14.393Z,1493667374.393 [RudderServo](FAULT): Overload Error 2017-05-01T19:36:20.417Z,1493667380.417 [RudderServo](FAULT): Overload Error 2017-05-01T19:36:26.397Z,1493667386.397 [RudderServo](FAULT): Overload Error 2017-05-01T19:36:26.450Z,1493667386.450 [CBIT](CRITICAL): Hardware Fault in component: RudderServo 2017-05-01T19:37:16.837Z,1493667436.837 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:37:17.169Z,1493667437.169 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2017-05-01T19:43:02.813Z,1493667782.813 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 34.217244 min 2017-05-01T19:49:17.008Z,1493668157.008 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:51:19.404Z,1493668279.404 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:51:30.893Z,1493668290.893 [RudderServo](FAULT): Overload Error 2017-05-01T19:51:36.897Z,1493668296.897 [RudderServo](FAULT): Overload Error 2017-05-01T19:51:42.941Z,1493668302.941 [RudderServo](FAULT): Overload Error 2017-05-01T19:51:42.981Z,1493668302.981 [CBIT](CRITICAL): Hardware Fault in component: RudderServo 2017-05-01T19:52:00.873Z,1493668320.873 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 43.184766 min 2017-05-01T19:53:21.675Z,1493668401.675 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:55:46.713Z,1493668546.713 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:57:49.242Z,1493668669.242 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T19:57:49.354Z,1493668669.354 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2017-05-01T20:00:30.907Z,1493668830.907 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 51.685234 min 2017-05-01T20:06:47.589Z,1493669207.589 [RudderServo](FAULT): Overload Error 2017-05-01T20:06:53.621Z,1493669213.621 [RudderServo](FAULT): Overload Error 2017-05-01T20:06:59.601Z,1493669219.601 [RudderServo](FAULT): Overload Error 2017-05-01T20:06:59.641Z,1493669219.641 [CBIT](CRITICAL): Hardware Fault in component: RudderServo 2017-05-01T20:09:22.469Z,1493669362.469 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 60.544287 min 2017-05-01T20:09:50.132Z,1493669390.132 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T20:11:52.484Z,1493669512.484 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T20:13:54.743Z,1493669634.743 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T20:15:57.136Z,1493669757.136 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T20:16:47.525Z,1493669807.525 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 67.961556 min 2017-05-01T20:18:00.113Z,1493669880.113 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2017-05-01T20:18:00.408Z,1493669880.408 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2017-05-01T20:22:04.133Z,1493670124.133 [RudderServo](FAULT): Overload Error 2017-05-01T20:22:10.133Z,1493670130.133 [RudderServo](FAULT): Overload Error 2017-05-01T20:22:16.145Z,1493670136.145 [RudderServo](FAULT): Overload Error 2017-05-01T20:22:16.189Z,1493670136.189 [CBIT](CRITICAL): Hardware Fault in component: RudderServo 2017-05-01T20:24:31.309Z,1493670271.309 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 75.692847 min 2017-05-01T20:25:11.259Z,1493670311.259 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=1113, MT Status=1, MTMSN=91