2018-03-24T22:51:50.683Z,1521931910.683 [Default:E.Execute](INFO): Executing command restart logs 2018-03-24T22:51:50.689Z,1521931910.689 [Default:E.Execute] Stopped 2018-03-24T22:51:50.690Z,1521931910.690 [Default](INFO): Completed Default 2018-03-24T22:51:50.690Z,1521931910.690 [Default] Stopped 2018-03-24T22:51:50.690Z,1521931910.690 [Default](DEBUG): Aggregate::uninitialize Default 2018-03-24T22:51:50.690Z,1521931910.690 [Default:B.GoToSurface] Stopped 2018-03-24T22:51:50.690Z,1521931910.690 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent. 2018-03-24T22:51:50.738Z,1521931910.738 [CommandLine](IMPORTANT): got command restart logs 2018-03-24T22:51:51.089Z,1521931911.089 [MissionManager](IMPORTANT): Started mission Default 2018-03-24T22:51:51.089Z,1521931911.089 [Default] Running Loop=1 2018-03-24T22:51:51.089Z,1521931911.089 [Default](DEBUG): Aggregate::initialize Default 2018-03-24T22:51:51.089Z,1521931911.089 [Default:B.GoToSurface] Running Loop=1 2018-03-24T22:51:51.089Z,1521931911.089 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent. 2018-03-24T22:51:51.090Z,1521931911.090 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s. 2018-03-24T22:51:51.090Z,1521931911.090 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees. 2018-03-24T22:51:51.090Z,1521931911.090 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s. 2018-03-24T22:51:51.091Z,1521931911.091 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 30.000000 seconds. 2018-03-24T22:51:51.091Z,1521931911.091 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds. 2018-03-24T22:51:51.091Z,1521931911.091 [Default:A.Wait] Running Loop=1 2018-03-24T22:51:51.091Z,1521931911.091 [Default:A.Wait](DEBUG): Initialize Wait Component. 2018-03-24T22:51:57.118Z,1521931917.118 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T22:51:57.118Z,1521931917.118 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 413 2018-03-24T22:51:57.118Z,1521931917.118 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T22:51:57.143Z,1521931917.143 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T22:51:57.259Z,1521931917.259 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T22:51:57.259Z,1521931917.259 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 413 2018-03-24T22:51:57.611Z,1521931917.611 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T22:51:57.611Z,1521931917.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T22:51:57.612Z,1521931917.612 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T22:52:01.175Z,1521931921.175 [BPC1](ERROR): Failed to receive battery data 2018-03-24T22:52:01.175Z,1521931921.175 [BPC1] Communications Fault, FailCount= 4 2018-03-24T22:52:01.175Z,1521931921.175 [BPC1](ERROR): Communications Fault 2018-03-24T22:52:01.237Z,1521931921.237 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T22:52:02.429Z,1521931922.429 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T22:52:02.429Z,1521931922.429 [BPC1] No Fault, FailCount= 4 2018-03-24T22:52:04.422Z,1521931924.422 [Default:A.Wait](INFO): Done Waiting. 2018-03-24T22:52:04.422Z,1521931924.422 [Default:A.Wait] Stopped 2018-03-24T22:52:04.422Z,1521931924.422 [Default:A.Wait](DEBUG): Uninitialize Wait Component. 2018-03-24T22:52:04.830Z,1521931924.830 [Default:CheckIn] Running Loop=1 2018-03-24T22:52:04.830Z,1521931924.830 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-03-24T22:52:04.830Z,1521931924.830 [Default:CheckIn:Read_GPS] Running Loop=1 2018-03-24T22:52:05.557Z,1521931925.557 [NAL9602](INFO): Powering up 2018-03-24T22:52:16.754Z,1521931936.754 [NAL9602](INFO): NAL9602 initialized 2018-03-24T22:52:37.987Z,1521931957.987 [BPC1](ERROR): Failed to receive battery data 2018-03-24T22:52:37.987Z,1521931957.987 [BPC1] Communications Fault, FailCount= 5 2018-03-24T22:52:37.987Z,1521931957.987 [BPC1](ERROR): Communications Fault 2018-03-24T22:52:38.012Z,1521931958.012 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T22:52:39.226Z,1521931959.226 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T22:52:39.226Z,1521931959.226 [BPC1] No Fault, FailCount= 5 2018-03-24T22:53:15.008Z,1521931995.008 [BPC1](ERROR): Failed to receive battery data 2018-03-24T22:53:15.008Z,1521931995.008 [BPC1] Communications Fault, FailCount= 6 2018-03-24T22:53:15.008Z,1521931995.008 [BPC1](ERROR): Communications Fault 2018-03-24T22:53:15.034Z,1521931995.034 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T22:53:16.240Z,1521931996.240 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T22:53:16.240Z,1521931996.240 [BPC1] No Fault, FailCount= 6 2018-03-24T22:53:53.386Z,1521932033.386 [BPC1](ERROR): Failed to receive battery data 2018-03-24T22:53:53.386Z,1521932033.386 [BPC1] Communications Fault, FailCount= 7 2018-03-24T22:53:53.386Z,1521932033.386 [BPC1](ERROR): Communications Fault 2018-03-24T22:53:53.458Z,1521932033.458 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T22:53:54.375Z,1521932034.375 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T22:53:54.375Z,1521932034.375 [BPC1] No Fault, FailCount= 7 2018-03-24T22:54:29.914Z,1521932069.914 [BPC1](ERROR): Failed to receive battery data 2018-03-24T22:54:29.914Z,1521932069.914 [BPC1] Communications Fault, FailCount= 8 2018-03-24T22:54:29.914Z,1521932069.914 [BPC1](ERROR): Communications Fault 2018-03-24T22:54:29.943Z,1521932069.943 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T22:54:31.209Z,1521932071.209 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T22:54:31.210Z,1521932071.210 [BPC1] No Fault, FailCount= 8 2018-03-24T22:54:58.020Z,1521932098.020 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T22:54:58.020Z,1521932098.020 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 414 2018-03-24T22:54:58.020Z,1521932098.020 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T22:54:58.050Z,1521932098.050 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T22:54:58.423Z,1521932098.423 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T22:54:58.423Z,1521932098.423 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 414 2018-03-24T22:54:58.807Z,1521932098.807 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T22:54:58.808Z,1521932098.808 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T22:54:58.808Z,1521932098.808 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T22:55:06.771Z,1521932106.771 [BPC1](ERROR): Failed to receive battery data 2018-03-24T22:55:06.771Z,1521932106.771 [BPC1] Communications Fault, FailCount= 9 2018-03-24T22:55:06.771Z,1521932106.771 [BPC1](ERROR): Communications Fault 2018-03-24T22:55:06.846Z,1521932106.846 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T22:55:08.040Z,1521932108.040 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T22:55:08.040Z,1521932108.040 [BPC1] No Fault, FailCount= 9 2018-03-24T22:55:43.972Z,1521932143.972 [BPC1](ERROR): Failed to receive battery data 2018-03-24T22:55:43.972Z,1521932143.972 [BPC1] Communications Fault, FailCount= 10 2018-03-24T22:55:43.972Z,1521932143.972 [BPC1](ERROR): Communications Fault 2018-03-24T22:55:44.043Z,1521932144.043 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T22:55:44.043Z,1521932144.043 [CBIT](CRITICAL): Communications Fault in component: BPC1 2018-03-24T22:55:44.425Z,1521932144.425 [CBIT](INFO): Critical error at 20180324T225544 2018-03-24T22:57:05.066Z,1521932225.066 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-24T22:52:04.8Z 2018-03-24T22:57:05.066Z,1521932225.066 [Default:CheckIn:Read_GPS] Stopped 2018-03-24T22:57:05.066Z,1521932225.066 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-03-24T22:57:10.751Z,1521932230.751 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180323T003405/Courier1100.lzma 2018-03-24T22:57:11.550Z,1521932231.550 [DataOverHttps](INFO): Moved sent file to Logs/20180323T003405/Courier1100.lzma.bak 2018-03-24T22:57:11.550Z,1521932231.550 [DataOverHttps](INFO): SBD MOMSN=8198402 2018-03-24T22:57:21.488Z,1521932241.488 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-03-24T22:57:22.003Z,1521932242.003 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180324T225150/Courier0000.lzma 2018-03-24T22:57:22.801Z,1521932242.801 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Courier0000.lzma.bak 2018-03-24T22:57:22.801Z,1521932242.801 [DataOverHttps](INFO): SBD MOMSN=8198404 2018-03-24T22:57:33.756Z,1521932253.756 [DataOverHttps](INFO): Sending 248 bytes from file Logs/20180323T003405/Express1101.lzma 2018-03-24T22:57:34.554Z,1521932254.554 [DataOverHttps](INFO): Moved sent file to Logs/20180323T003405/Express1101.lzma.bak 2018-03-24T22:57:34.554Z,1521932254.554 [DataOverHttps](INFO): SBD MOMSN=8198408 2018-03-24T22:57:45.280Z,1521932265.280 [DataOverHttps](INFO): Sending 299 bytes from file Logs/20180324T225150/Express0001.lzma 2018-03-24T22:57:46.077Z,1521932266.077 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Express0001.lzma.bak 2018-03-24T22:57:46.077Z,1521932266.077 [DataOverHttps](INFO): SBD MOMSN=8198413 2018-03-24T22:57:47.313Z,1521932267.313 [Default:CheckIn:Read_Iridium] Stopped 2018-03-24T22:57:47.313Z,1521932267.313 [Default:CheckIn:C.Wait] Running Loop=1 2018-03-24T22:57:47.313Z,1521932267.313 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-03-24T22:57:51.813Z,1521932271.813 [NAL9602](INFO): Powering down 2018-03-24T22:57:59.043Z,1521932279.043 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T22:57:59.043Z,1521932279.043 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 415 2018-03-24T22:57:59.043Z,1521932279.043 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T22:57:59.131Z,1521932279.131 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T22:57:59.459Z,1521932279.459 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T22:57:59.459Z,1521932279.459 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 415 2018-03-24T22:57:59.850Z,1521932279.850 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T22:57:59.851Z,1521932279.851 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T22:57:59.851Z,1521932279.851 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:00:44.352Z,1521932444.352 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:00:44.352Z,1521932444.352 [BPC1] No Fault, FailCount= 10 2018-03-24T23:01:00.066Z,1521932460.066 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:01:00.066Z,1521932460.066 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 416 2018-03-24T23:01:00.066Z,1521932460.066 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:01:00.079Z,1521932460.079 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:01:00.489Z,1521932460.489 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:01:00.490Z,1521932460.490 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 416 2018-03-24T23:01:00.874Z,1521932460.874 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:01:00.874Z,1521932460.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:01:00.874Z,1521932460.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:01:21.654Z,1521932481.654 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:01:21.654Z,1521932481.654 [BPC1] Communications Fault, FailCount= 1 2018-03-24T23:01:21.654Z,1521932481.654 [BPC1](ERROR): Communications Fault 2018-03-24T23:01:21.720Z,1521932481.720 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:01:22.907Z,1521932482.907 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:01:22.907Z,1521932482.907 [BPC1] No Fault, FailCount= 1 2018-03-24T23:01:58.567Z,1521932518.567 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:01:58.568Z,1521932518.568 [BPC1] Communications Fault, FailCount= 2 2018-03-24T23:01:58.568Z,1521932518.568 [BPC1](ERROR): Communications Fault 2018-03-24T23:01:58.595Z,1521932518.595 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:01:59.795Z,1521932519.795 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:01:59.795Z,1521932519.795 [BPC1] No Fault, FailCount= 2 2018-03-24T23:02:35.768Z,1521932555.768 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:02:35.768Z,1521932555.768 [BPC1] Communications Fault, FailCount= 3 2018-03-24T23:02:35.768Z,1521932555.768 [BPC1](ERROR): Communications Fault 2018-03-24T23:02:35.839Z,1521932555.839 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:02:36.994Z,1521932556.994 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:02:36.995Z,1521932556.995 [BPC1] No Fault, FailCount= 3 2018-03-24T23:02:47.790Z,1521932567.790 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-03-24T23:02:47.790Z,1521932567.790 [Default:CheckIn:C.Wait] Stopped 2018-03-24T23:02:47.790Z,1521932567.790 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-03-24T23:02:47.790Z,1521932567.790 [Default:CheckIn:D] Running Loop=1 2018-03-24T23:02:48.183Z,1521932568.183 [Default:CheckIn:D] Stopped 2018-03-24T23:02:48.183Z,1521932568.183 [Default:CheckIn:E] Running Loop=1 2018-03-24T23:02:48.585Z,1521932568.585 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.951558 min 2018-03-24T23:02:48.585Z,1521932568.585 [Default:CheckIn:E] Stopped 2018-03-24T23:02:48.585Z,1521932568.585 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-03-24T23:02:48.585Z,1521932568.585 [Default:CheckIn] Stopped 2018-03-24T23:02:48.585Z,1521932568.585 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-03-24T23:02:48.585Z,1521932568.585 [Default:CheckIn](INFO): Running loop #2 2018-03-24T23:02:48.585Z,1521932568.585 [Default:CheckIn] Running Loop=2 2018-03-24T23:02:48.586Z,1521932568.586 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-03-24T23:02:48.586Z,1521932568.586 [Default:CheckIn:Read_GPS] Running Loop=1 2018-03-24T23:02:51.821Z,1521932571.821 [NAL9602](INFO): Powering up 2018-03-24T23:03:02.998Z,1521932582.998 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:03:03.798Z,1521932583.798 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-03-24T23:03:03.798Z,1521932583.798 [NAL9602] Data Fault, FailCount= 3 2018-03-24T23:03:03.798Z,1521932583.798 [NAL9602](ERROR): Data Fault 2018-03-24T23:03:03.885Z,1521932583.885 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-24T23:03:04.198Z,1521932584.198 [NAL9602](INFO): Powering down 2018-03-24T23:03:05.067Z,1521932585.067 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-24T23:03:05.067Z,1521932585.067 [NAL9602] No Fault, FailCount= 3 2018-03-24T23:03:12.637Z,1521932592.637 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:03:12.637Z,1521932592.637 [BPC1] Communications Fault, FailCount= 4 2018-03-24T23:03:12.638Z,1521932592.638 [BPC1](ERROR): Communications Fault 2018-03-24T23:03:12.666Z,1521932592.666 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:03:13.888Z,1521932593.888 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:03:13.889Z,1521932593.889 [BPC1] No Fault, FailCount= 4 2018-03-24T23:03:34.210Z,1521932614.210 [NAL9602](INFO): Powering up NAL9602 2018-03-24T23:03:45.402Z,1521932625.402 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:03:51.854Z,1521932631.854 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:03:51.854Z,1521932631.854 [BPC1] Communications Fault, FailCount= 5 2018-03-24T23:03:51.854Z,1521932631.854 [BPC1](ERROR): Communications Fault 2018-03-24T23:03:51.880Z,1521932631.880 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:03:52.759Z,1521932632.759 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:03:52.759Z,1521932632.759 [BPC1] No Fault, FailCount= 5 2018-03-24T23:04:01.139Z,1521932641.139 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:04:01.139Z,1521932641.139 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 417 2018-03-24T23:04:01.140Z,1521932641.140 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:04:01.176Z,1521932641.176 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:04:01.613Z,1521932641.613 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:04:01.613Z,1521932641.613 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 417 2018-03-24T23:04:01.951Z,1521932641.951 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:04:01.952Z,1521932641.952 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:04:01.952Z,1521932641.952 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:04:28.340Z,1521932668.340 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:04:28.340Z,1521932668.340 [BPC1] Communications Fault, FailCount= 6 2018-03-24T23:04:28.340Z,1521932668.340 [BPC1](ERROR): Communications Fault 2018-03-24T23:04:28.403Z,1521932668.403 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:04:29.596Z,1521932669.596 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:04:29.596Z,1521932669.596 [BPC1] No Fault, FailCount= 6 2018-03-24T23:05:05.302Z,1521932705.302 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:05:05.302Z,1521932705.302 [BPC1] Communications Fault, FailCount= 7 2018-03-24T23:05:05.302Z,1521932705.302 [BPC1](ERROR): Communications Fault 2018-03-24T23:05:05.328Z,1521932705.328 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:05:06.534Z,1521932706.534 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:05:06.534Z,1521932706.534 [BPC1] No Fault, FailCount= 7 2018-03-24T23:05:42.498Z,1521932742.498 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:05:42.498Z,1521932742.498 [BPC1] Communications Fault, FailCount= 8 2018-03-24T23:05:42.498Z,1521932742.498 [BPC1](ERROR): Communications Fault 2018-03-24T23:05:42.568Z,1521932742.568 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:05:43.742Z,1521932743.742 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:05:43.742Z,1521932743.742 [BPC1] No Fault, FailCount= 8 2018-03-24T23:06:28.170Z,1521932788.170 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:06:28.170Z,1521932788.170 [BPC1] Communications Fault, FailCount= 1 2018-03-24T23:06:28.170Z,1521932788.170 [BPC1](ERROR): Communications Fault 2018-03-24T23:06:28.195Z,1521932788.195 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:06:29.401Z,1521932789.401 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:06:29.401Z,1521932789.401 [BPC1] No Fault, FailCount= 1 2018-03-24T23:07:02.275Z,1521932822.275 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:07:02.276Z,1521932822.276 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 418 2018-03-24T23:07:02.276Z,1521932822.276 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:07:02.288Z,1521932822.288 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:07:02.718Z,1521932822.718 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:07:02.718Z,1521932822.718 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 418 2018-03-24T23:07:03.059Z,1521932823.059 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:07:03.059Z,1521932823.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:07:03.060Z,1521932823.060 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:07:05.031Z,1521932825.031 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:07:05.031Z,1521932825.031 [BPC1] Communications Fault, FailCount= 2 2018-03-24T23:07:05.031Z,1521932825.031 [BPC1](ERROR): Communications Fault 2018-03-24T23:07:05.117Z,1521932825.117 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:07:06.280Z,1521932826.280 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:07:06.280Z,1521932826.280 [BPC1] No Fault, FailCount= 2 2018-03-24T23:07:41.841Z,1521932861.841 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:07:41.841Z,1521932861.841 [BPC1] Communications Fault, FailCount= 3 2018-03-24T23:07:41.841Z,1521932861.841 [BPC1](ERROR): Communications Fault 2018-03-24T23:07:41.896Z,1521932861.896 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:07:43.090Z,1521932863.090 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:07:43.090Z,1521932863.090 [BPC1] No Fault, FailCount= 3 2018-03-24T23:07:48.659Z,1521932868.659 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-24T23:02:48.6Z 2018-03-24T23:07:48.659Z,1521932868.659 [Default:CheckIn:Read_GPS] Stopped 2018-03-24T23:07:48.659Z,1521932868.659 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-03-24T23:07:53.275Z,1521932873.275 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180324T225150/Courier0004.lzma 2018-03-24T23:07:54.073Z,1521932874.073 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Courier0004.lzma.bak 2018-03-24T23:07:54.073Z,1521932874.073 [DataOverHttps](INFO): SBD MOMSN=8198465 2018-03-24T23:08:04.988Z,1521932884.988 [DataOverHttps](INFO): Sending 259 bytes from file Logs/20180324T225150/Express0005.lzma 2018-03-24T23:08:05.785Z,1521932885.785 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Express0005.lzma.bak 2018-03-24T23:08:05.786Z,1521932885.786 [DataOverHttps](INFO): SBD MOMSN=8198467 2018-03-24T23:08:06.972Z,1521932886.972 [BPC1](INFO): Failure count cleared after critical for BPC1 2018-03-24T23:08:07.025Z,1521932887.025 [Default:CheckIn:Read_Iridium] Stopped 2018-03-24T23:08:07.025Z,1521932887.025 [Default:CheckIn:C.Wait] Running Loop=1 2018-03-24T23:08:07.025Z,1521932887.025 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-03-24T23:08:37.285Z,1521932917.285 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:08:37.285Z,1521932917.285 [BPC1] Communications Fault, FailCount= 1 2018-03-24T23:08:37.285Z,1521932917.285 [BPC1](ERROR): Communications Fault 2018-03-24T23:08:37.318Z,1521932917.318 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:08:38.517Z,1521932918.517 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:08:38.518Z,1521932918.518 [BPC1] No Fault, FailCount= 1 2018-03-24T23:08:48.838Z,1521932928.838 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-03-24T23:09:14.158Z,1521932954.158 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:09:14.158Z,1521932954.158 [BPC1] Communications Fault, FailCount= 2 2018-03-24T23:09:14.158Z,1521932954.158 [BPC1](ERROR): Communications Fault 2018-03-24T23:09:14.219Z,1521932954.219 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:09:15.383Z,1521932955.383 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:09:15.383Z,1521932955.383 [BPC1] No Fault, FailCount= 2 2018-03-24T23:09:19.309Z,1521932959.309 [NAL9602](INFO): Powering down 2018-03-24T23:09:50.947Z,1521932990.947 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:09:50.947Z,1521932990.947 [BPC1] Communications Fault, FailCount= 3 2018-03-24T23:09:50.947Z,1521932990.947 [BPC1](ERROR): Communications Fault 2018-03-24T23:09:50.972Z,1521932990.972 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:09:52.198Z,1521932992.198 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:09:52.198Z,1521932992.198 [BPC1] No Fault, FailCount= 3 2018-03-24T23:10:03.351Z,1521933003.351 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:10:03.351Z,1521933003.351 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 419 2018-03-24T23:10:03.351Z,1521933003.351 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:10:03.400Z,1521933003.400 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:10:03.773Z,1521933003.773 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:10:03.773Z,1521933003.773 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 419 2018-03-24T23:10:04.174Z,1521933004.174 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:10:04.174Z,1521933004.174 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:10:04.175Z,1521933004.175 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:10:27.761Z,1521933027.761 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:10:27.761Z,1521933027.761 [BPC1] Communications Fault, FailCount= 4 2018-03-24T23:10:27.761Z,1521933027.761 [BPC1](ERROR): Communications Fault 2018-03-24T23:10:27.817Z,1521933027.817 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:10:29.055Z,1521933029.055 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:10:29.055Z,1521933029.055 [BPC1] No Fault, FailCount= 4 2018-03-24T23:11:04.558Z,1521933064.558 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:11:04.558Z,1521933064.558 [BPC1] Communications Fault, FailCount= 5 2018-03-24T23:11:04.558Z,1521933064.558 [BPC1](ERROR): Communications Fault 2018-03-24T23:11:04.584Z,1521933064.584 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:11:05.782Z,1521933065.782 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:11:05.783Z,1521933065.783 [BPC1] No Fault, FailCount= 5 2018-03-24T23:11:41.879Z,1521933101.879 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:11:41.879Z,1521933101.879 [BPC1] Communications Fault, FailCount= 6 2018-03-24T23:11:41.879Z,1521933101.879 [BPC1](ERROR): Communications Fault 2018-03-24T23:11:41.920Z,1521933101.920 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:11:43.141Z,1521933103.141 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:11:43.141Z,1521933103.141 [BPC1] No Fault, FailCount= 6 2018-03-24T23:12:18.894Z,1521933138.894 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:12:18.894Z,1521933138.894 [BPC1] Communications Fault, FailCount= 7 2018-03-24T23:12:18.895Z,1521933138.895 [BPC1](ERROR): Communications Fault 2018-03-24T23:12:18.921Z,1521933138.921 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:12:20.133Z,1521933140.133 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:12:20.134Z,1521933140.134 [BPC1] No Fault, FailCount= 7 2018-03-24T23:12:55.714Z,1521933175.714 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:12:55.714Z,1521933175.714 [BPC1] Communications Fault, FailCount= 8 2018-03-24T23:12:55.714Z,1521933175.714 [BPC1](ERROR): Communications Fault 2018-03-24T23:12:55.764Z,1521933175.764 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:12:56.937Z,1521933176.937 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:12:56.937Z,1521933176.937 [BPC1] No Fault, FailCount= 8 2018-03-24T23:13:04.516Z,1521933184.516 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:13:04.516Z,1521933184.516 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 420 2018-03-24T23:13:04.516Z,1521933184.516 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:13:04.585Z,1521933184.585 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:13:04.959Z,1521933184.959 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:13:04.959Z,1521933184.959 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 420 2018-03-24T23:13:05.307Z,1521933185.307 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:13:05.308Z,1521933185.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:13:05.308Z,1521933185.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:13:07.321Z,1521933187.321 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-03-24T23:13:07.321Z,1521933187.321 [Default:CheckIn:C.Wait] Stopped 2018-03-24T23:13:07.321Z,1521933187.321 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-03-24T23:13:07.321Z,1521933187.321 [Default:CheckIn:D] Running Loop=1 2018-03-24T23:13:07.713Z,1521933187.713 [Default:CheckIn:D] Stopped 2018-03-24T23:13:07.713Z,1521933187.713 [Default:CheckIn:E] Running Loop=1 2018-03-24T23:13:08.150Z,1521933188.150 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.277063 min 2018-03-24T23:13:08.150Z,1521933188.150 [Default:CheckIn:E] Stopped 2018-03-24T23:13:08.150Z,1521933188.150 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-03-24T23:13:08.150Z,1521933188.150 [Default:CheckIn] Stopped 2018-03-24T23:13:08.150Z,1521933188.150 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-03-24T23:13:08.150Z,1521933188.150 [Default:CheckIn](INFO): Running loop #3 2018-03-24T23:13:08.150Z,1521933188.150 [Default:CheckIn] Running Loop=3 2018-03-24T23:13:08.150Z,1521933188.151 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-03-24T23:13:08.151Z,1521933188.151 [Default:CheckIn:Read_GPS] Running Loop=1 2018-03-24T23:13:11.541Z,1521933191.541 [NAL9602](INFO): Powering up 2018-03-24T23:13:22.682Z,1521933202.682 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:13:45.516Z,1521933225.516 [BPC1](ERROR): Failed to receive battery data 2018-03-24T23:13:45.516Z,1521933225.516 [BPC1] Communications Fault, FailCount= 1 2018-03-24T23:13:45.516Z,1521933225.516 [BPC1](ERROR): Communications Fault 2018-03-24T23:13:45.574Z,1521933225.574 [CBIT](ERROR): Communications Fault in component: BPC1 2018-03-24T23:13:46.810Z,1521933226.810 [CBIT](INFO): Clearing failed state for component BPC1 2018-03-24T23:13:46.810Z,1521933226.810 [BPC1] No Fault, FailCount= 1 2018-03-24T23:13:54.682Z,1521933234.682 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-03-24T23:13:54.757Z,1521933234.757 [NAL9602](FAULT): received: +CSQ:0 OK15, 2, 0, 0, 0 OK 2018-03-24T23:13:54.757Z,1521933234.757 [NAL9602] Data Fault, FailCount= 4 2018-03-24T23:13:54.757Z,1521933234.757 [NAL9602](ERROR): Data Fault 2018-03-24T23:13:54.849Z,1521933234.849 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-24T23:13:55.086Z,1521933235.086 [NAL9602](INFO): Powering down 2018-03-24T23:13:55.953Z,1521933235.953 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-24T23:13:55.953Z,1521933235.953 [NAL9602] No Fault, FailCount= 4 2018-03-24T23:14:25.294Z,1521933265.294 [NAL9602](INFO): Powering up NAL9602 2018-03-24T23:14:36.110Z,1521933276.110 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:14:36.898Z,1521933276.898 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-03-24T23:14:36.898Z,1521933276.898 [NAL9602] Data Fault, FailCount= 5 2018-03-24T23:14:36.898Z,1521933276.898 [NAL9602](ERROR): Data Fault 2018-03-24T23:14:37.006Z,1521933277.006 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-24T23:14:37.006Z,1521933277.006 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-03-24T23:14:37.297Z,1521933277.297 [NAL9602](INFO): Powering down 2018-03-24T23:14:37.391Z,1521933277.391 [CBIT](INFO): Critical error at 20180324T231437 2018-03-24T23:16:05.466Z,1521933365.466 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:16:05.466Z,1521933365.466 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 421 2018-03-24T23:16:05.467Z,1521933365.467 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:16:05.500Z,1521933365.500 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:16:05.935Z,1521933365.935 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:16:05.935Z,1521933365.935 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 421 2018-03-24T23:16:06.239Z,1521933366.239 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:16:06.240Z,1521933366.240 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:16:06.240Z,1521933366.240 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:16:37.193Z,1521933397.193 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-24T23:16:37.193Z,1521933397.193 [NAL9602] No Fault, FailCount= 5 2018-03-24T23:16:37.442Z,1521933397.442 [NAL9602](INFO): Powering up NAL9602 2018-03-24T23:16:48.642Z,1521933408.642 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:18:08.386Z,1521933488.386 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-24T23:13:08.2Z 2018-03-24T23:18:08.386Z,1521933488.386 [Default:CheckIn:Read_GPS] Stopped 2018-03-24T23:18:08.386Z,1521933488.386 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-03-24T23:18:17.137Z,1521933497.137 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180324T225150/Courier0008.lzma 2018-03-24T23:18:17.898Z,1521933497.898 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Courier0008.lzma.bak 2018-03-24T23:18:17.898Z,1521933497.898 [DataOverHttps](INFO): SBD MOMSN=8198520 2018-03-24T23:18:27.111Z,1521933507.111 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-03-24T23:18:35.967Z,1521933515.967 [DataOverHttps](INFO): Sending 254 bytes from file Logs/20180324T225150/Express0009.lzma 2018-03-24T23:18:36.750Z,1521933516.750 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Express0009.lzma.bak 2018-03-24T23:18:36.750Z,1521933516.750 [DataOverHttps](INFO): SBD MOMSN=8198523 2018-03-24T23:18:39.028Z,1521933519.028 [Default:CheckIn:Read_Iridium] Stopped 2018-03-24T23:18:39.028Z,1521933519.028 [Default:CheckIn:C.Wait] Running Loop=1 2018-03-24T23:18:39.028Z,1521933519.028 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-03-24T23:18:57.665Z,1521933537.665 [NAL9602](INFO): Powering down 2018-03-24T23:19:06.579Z,1521933546.579 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:19:06.580Z,1521933546.580 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 422 2018-03-24T23:19:06.580Z,1521933546.580 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:19:06.644Z,1521933546.644 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:19:06.991Z,1521933546.991 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:19:06.992Z,1521933546.992 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 422 2018-03-24T23:19:07.366Z,1521933547.366 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:19:07.366Z,1521933547.366 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:19:07.367Z,1521933547.367 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:22:07.397Z,1521933727.397 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:22:07.398Z,1521933727.398 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 423 2018-03-24T23:22:07.398Z,1521933727.398 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:22:07.432Z,1521933727.432 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:22:07.806Z,1521933727.806 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:22:07.806Z,1521933727.806 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 423 2018-03-24T23:22:08.184Z,1521933728.184 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:22:08.189Z,1521933728.189 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:22:08.189Z,1521933728.189 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:23:39.428Z,1521933819.428 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-03-24T23:23:39.428Z,1521933819.428 [Default:CheckIn:C.Wait] Stopped 2018-03-24T23:23:39.428Z,1521933819.428 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-03-24T23:23:39.433Z,1521933819.433 [Default:CheckIn:D] Running Loop=1 2018-03-24T23:23:39.820Z,1521933819.820 [Default:CheckIn:D] Stopped 2018-03-24T23:23:39.820Z,1521933819.820 [Default:CheckIn:E] Running Loop=1 2018-03-24T23:23:40.230Z,1521933820.230 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.812179 min 2018-03-24T23:23:40.230Z,1521933820.230 [Default:CheckIn:E] Stopped 2018-03-24T23:23:40.230Z,1521933820.230 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-03-24T23:23:40.231Z,1521933820.231 [Default:CheckIn] Stopped 2018-03-24T23:23:40.231Z,1521933820.231 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-03-24T23:23:40.231Z,1521933820.231 [Default:CheckIn](INFO): Running loop #4 2018-03-24T23:23:40.231Z,1521933820.231 [Default:CheckIn] Running Loop=4 2018-03-24T23:23:40.231Z,1521933820.231 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-03-24T23:23:40.231Z,1521933820.231 [Default:CheckIn:Read_GPS] Running Loop=1 2018-03-24T23:23:47.411Z,1521933827.411 [NAL9602](INFO): Powering up 2018-03-24T23:23:58.394Z,1521933838.394 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:24:30.394Z,1521933870.394 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-03-24T23:24:30.477Z,1521933870.477 [NAL9602](FAULT): received: +CSQ:0 OK15, 2, 0, 0, 0 OK 2018-03-24T23:24:30.477Z,1521933870.477 [NAL9602] Data Fault, FailCount= 1 2018-03-24T23:24:30.477Z,1521933870.477 [NAL9602](ERROR): Data Fault 2018-03-24T23:24:30.595Z,1521933870.595 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-24T23:24:30.793Z,1521933870.793 [NAL9602](INFO): Powering down 2018-03-24T23:24:31.763Z,1521933871.763 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-24T23:24:31.763Z,1521933871.763 [NAL9602] No Fault, FailCount= 1 2018-03-24T23:25:01.058Z,1521933901.058 [NAL9602](INFO): Powering up NAL9602 2018-03-24T23:25:08.373Z,1521933908.373 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:25:08.373Z,1521933908.373 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 424 2018-03-24T23:25:08.373Z,1521933908.373 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:25:08.412Z,1521933908.412 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:25:08.786Z,1521933908.786 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:25:08.786Z,1521933908.786 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 424 2018-03-24T23:25:09.133Z,1521933909.133 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:25:09.133Z,1521933909.133 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:25:09.134Z,1521933909.134 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:25:11.862Z,1521933911.862 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:28:09.388Z,1521934089.388 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:28:09.417Z,1521934089.417 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 425 2018-03-24T23:28:09.417Z,1521934089.417 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:28:09.482Z,1521934089.482 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:28:09.825Z,1521934089.825 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:28:09.825Z,1521934089.825 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 425 2018-03-24T23:28:10.193Z,1521934090.193 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:28:10.193Z,1521934090.193 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:28:10.193Z,1521934090.193 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:28:40.613Z,1521934120.613 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-24T23:23:40.2Z 2018-03-24T23:28:40.613Z,1521934120.613 [Default:CheckIn:Read_GPS] Stopped 2018-03-24T23:28:40.615Z,1521934120.615 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-03-24T23:28:49.605Z,1521934129.605 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20180324T225150/Courier0012.lzma 2018-03-24T23:28:50.398Z,1521934130.398 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Courier0012.lzma.bak 2018-03-24T23:28:50.398Z,1521934130.398 [DataOverHttps](INFO): SBD MOMSN=8198575 2018-03-24T23:29:08.486Z,1521934148.486 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-03-24T23:29:08.615Z,1521934148.615 [DataOverHttps](INFO): Sending 236 bytes from file Logs/20180324T225150/Express0013.lzma 2018-03-24T23:29:09.414Z,1521934149.414 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Express0013.lzma.bak 2018-03-24T23:29:09.414Z,1521934149.414 [DataOverHttps](INFO): SBD MOMSN=8198577 2018-03-24T23:29:11.707Z,1521934151.707 [Default:CheckIn:Read_Iridium] Stopped 2018-03-24T23:29:11.707Z,1521934151.707 [Default:CheckIn:C.Wait] Running Loop=1 2018-03-24T23:29:11.707Z,1521934151.707 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-03-24T23:29:38.825Z,1521934178.825 [NAL9602](INFO): Powering down 2018-03-24T23:31:10.480Z,1521934270.480 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:31:10.489Z,1521934270.489 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 426 2018-03-24T23:31:10.489Z,1521934270.489 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:31:10.522Z,1521934270.522 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:31:10.913Z,1521934270.913 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:31:10.913Z,1521934270.913 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 426 2018-03-24T23:31:11.263Z,1521934271.263 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:31:11.263Z,1521934271.263 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:31:11.263Z,1521934271.263 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:34:11.479Z,1521934451.479 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:34:11.479Z,1521934451.479 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 427 2018-03-24T23:34:11.479Z,1521934451.479 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:34:11.543Z,1521934451.543 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:34:11.872Z,1521934451.872 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:34:11.872Z,1521934451.872 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 427 2018-03-24T23:34:12.261Z,1521934452.261 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:34:12.262Z,1521934452.262 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:34:12.262Z,1521934452.262 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:34:12.264Z,1521934452.264 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-03-24T23:34:12.264Z,1521934452.264 [Default:CheckIn:C.Wait] Stopped 2018-03-24T23:34:12.264Z,1521934452.264 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-03-24T23:34:12.265Z,1521934452.265 [Default:CheckIn:D] Running Loop=1 2018-03-24T23:34:12.670Z,1521934452.670 [Default:CheckIn:D] Stopped 2018-03-24T23:34:12.670Z,1521934452.670 [Default:CheckIn:E] Running Loop=1 2018-03-24T23:34:13.066Z,1521934453.066 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 42.359672 min 2018-03-24T23:34:13.066Z,1521934453.066 [Default:CheckIn:E] Stopped 2018-03-24T23:34:13.067Z,1521934453.067 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-03-24T23:34:13.067Z,1521934453.067 [Default:CheckIn] Stopped 2018-03-24T23:34:13.067Z,1521934453.067 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-03-24T23:34:13.067Z,1521934453.067 [Default:CheckIn](INFO): Running loop #5 2018-03-24T23:34:13.067Z,1521934453.067 [Default:CheckIn] Running Loop=5 2018-03-24T23:34:13.067Z,1521934453.067 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-03-24T23:34:13.067Z,1521934453.067 [Default:CheckIn:Read_GPS] Running Loop=1 2018-03-24T23:34:20.190Z,1521934460.190 [NAL9602](INFO): Powering up 2018-03-24T23:34:31.158Z,1521934471.158 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:34:31.958Z,1521934471.958 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-03-24T23:34:31.958Z,1521934471.958 [NAL9602] Data Fault, FailCount= 2 2018-03-24T23:34:31.958Z,1521934471.958 [NAL9602](ERROR): Data Fault 2018-03-24T23:34:32.070Z,1521934472.070 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-24T23:34:32.357Z,1521934472.357 [NAL9602](INFO): Powering down 2018-03-24T23:34:33.317Z,1521934473.317 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-24T23:34:33.317Z,1521934473.317 [NAL9602] No Fault, FailCount= 2 2018-03-24T23:35:02.758Z,1521934502.758 [NAL9602](INFO): Powering up NAL9602 2018-03-24T23:35:20.560Z,1521934520.560 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:37:12.409Z,1521934632.409 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:37:12.409Z,1521934632.409 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 428 2018-03-24T23:37:12.409Z,1521934632.409 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:37:12.434Z,1521934632.434 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:37:12.861Z,1521934632.861 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:37:12.862Z,1521934632.862 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 428 2018-03-24T23:37:13.184Z,1521934633.184 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:37:13.184Z,1521934633.184 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:37:13.189Z,1521934633.189 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:38:21.437Z,1521934701.437 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2018-03-24T23:38:21.437Z,1521934701.437 [PNI_TCM] Data Fault, FailCount= 1 2018-03-24T23:38:21.437Z,1521934701.437 [PNI_TCM](ERROR): Data Fault 2018-03-24T23:38:21.471Z,1521934701.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.984089 seconds old. 2018-03-24T23:38:21.473Z,1521934701.473 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.984580 seconds old. 2018-03-24T23:38:21.476Z,1521934701.476 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.981468 seconds old. 2018-03-24T23:38:21.525Z,1521934701.525 [CBIT](ERROR): Data Fault in component: PNI_TCM 2018-03-24T23:38:21.600Z,1521934701.600 [PNI_TCM](INFO): Powering down 2018-03-24T23:38:21.718Z,1521934701.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.231048 seconds old. 2018-03-24T23:38:21.720Z,1521934701.720 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.231444 seconds old. 2018-03-24T23:38:21.731Z,1521934701.731 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.235836 seconds old. 2018-03-24T23:38:22.051Z,1521934702.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.564891 seconds old. 2018-03-24T23:38:22.054Z,1521934702.054 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.565385 seconds old. 2018-03-24T23:38:22.056Z,1521934702.056 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.561284 seconds old. 2018-03-24T23:38:22.419Z,1521934702.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.932174 seconds old. 2018-03-24T23:38:22.429Z,1521934702.429 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.940793 seconds old. 2018-03-24T23:38:22.431Z,1521934702.431 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.936806 seconds old. 2018-03-24T23:38:22.787Z,1521934702.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.300534 seconds old. 2018-03-24T23:38:22.814Z,1521934702.814 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.325227 seconds old. 2018-03-24T23:38:22.816Z,1521934702.816 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.321210 seconds old. 2018-03-24T23:38:22.853Z,1521934702.853 [CBIT](INFO): Clearing failed state for component PNI_TCM 2018-03-24T23:38:22.853Z,1521934702.853 [PNI_TCM] No Fault, FailCount= 1 2018-03-24T23:38:23.229Z,1521934703.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.742666 seconds old. 2018-03-24T23:38:23.232Z,1521934703.232 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.743082 seconds old. 2018-03-24T23:38:23.234Z,1521934703.234 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.739110 seconds old. 2018-03-24T23:38:23.619Z,1521934703.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.131934 seconds old. 2018-03-24T23:38:23.621Z,1521934703.621 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.132433 seconds old. 2018-03-24T23:38:23.623Z,1521934703.623 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.128365 seconds old. 2018-03-24T23:38:24.022Z,1521934704.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.535029 seconds old. 2018-03-24T23:38:24.024Z,1521934704.024 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.535449 seconds old. 2018-03-24T23:38:24.031Z,1521934704.031 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.535908 seconds old. 2018-03-24T23:38:24.430Z,1521934704.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.943124 seconds old. 2018-03-24T23:38:24.432Z,1521934704.432 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.943512 seconds old. 2018-03-24T23:38:24.434Z,1521934704.434 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.939509 seconds old. 2018-03-24T23:38:24.803Z,1521934704.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.316602 seconds old. 2018-03-24T23:38:24.823Z,1521934704.823 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.334841 seconds old. 2018-03-24T23:38:24.826Z,1521934704.826 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.330933 seconds old. 2018-03-24T23:38:25.220Z,1521934705.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.733452 seconds old. 2018-03-24T23:38:25.227Z,1521934705.227 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.738251 seconds old. 2018-03-24T23:38:25.229Z,1521934705.229 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.734607 seconds old. 2018-03-24T23:38:25.609Z,1521934705.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.122673 seconds old. 2018-03-24T23:38:25.612Z,1521934705.612 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.123088 seconds old. 2018-03-24T23:38:25.644Z,1521934705.644 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.149472 seconds old. 2018-03-24T23:38:25.000Z,1521934706.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.513270 seconds old. 2018-03-24T23:38:26.031Z,1521934706.031 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.542907 seconds old. 2018-03-24T23:38:26.044Z,1521934706.044 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.549624 seconds old. 2018-03-24T23:39:13.259Z,1521934753.259 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-24T23:34:13.1Z 2018-03-24T23:39:13.260Z,1521934753.260 [Default:CheckIn:Read_GPS] Stopped 2018-03-24T23:39:13.261Z,1521934753.261 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-03-24T23:39:22.744Z,1521934762.744 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180324T225150/Courier0016.lzma 2018-03-24T23:39:23.516Z,1521934763.516 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Courier0016.lzma.bak 2018-03-24T23:39:23.516Z,1521934763.516 [DataOverHttps](INFO): SBD MOMSN=8198645 2018-03-24T23:39:42.283Z,1521934782.283 [DataOverHttps](INFO): Sending 261 bytes from file Logs/20180324T225150/Express0017.lzma 2018-03-24T23:39:43.065Z,1521934783.065 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Express0017.lzma.bak 2018-03-24T23:39:43.066Z,1521934783.066 [DataOverHttps](INFO): SBD MOMSN=8198647 2018-03-24T23:39:45.355Z,1521934785.355 [Default:CheckIn:Read_Iridium] Stopped 2018-03-24T23:39:45.355Z,1521934785.355 [Default:CheckIn:C.Wait] Running Loop=1 2018-03-24T23:39:45.355Z,1521934785.355 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-03-24T23:40:13.599Z,1521934813.599 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:40:13.599Z,1521934813.599 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 429 2018-03-24T23:40:13.599Z,1521934813.599 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:40:13.664Z,1521934813.664 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:40:14.012Z,1521934814.012 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:40:14.013Z,1521934814.013 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 429 2018-03-24T23:40:14.363Z,1521934814.363 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:40:14.364Z,1521934814.364 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:40:14.364Z,1521934814.364 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:40:23.458Z,1521934823.458 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-03-24T23:40:23.476Z,1521934823.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:23.876Z,1521934823.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:24.282Z,1521934824.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:25.876Z,1521934825.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:26.276Z,1521934826.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:26.679Z,1521934826.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:27.084Z,1521934827.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:27.483Z,1521934827.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:27.882Z,1521934827.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:28.283Z,1521934828.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:28.676Z,1521934828.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:29.078Z,1521934829.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:29.476Z,1521934829.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:29.877Z,1521934829.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:30.276Z,1521934830.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:30.676Z,1521934830.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:31.085Z,1521934831.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:31.476Z,1521934831.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:31.876Z,1521934831.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:32.276Z,1521934832.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:32.676Z,1521934832.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:33.081Z,1521934833.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:33.480Z,1521934833.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:33.881Z,1521934833.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:34.281Z,1521934834.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:34.684Z,1521934834.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:35.076Z,1521934835.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:35.475Z,1521934835.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:35.875Z,1521934835.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:36.275Z,1521934836.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:40:54.197Z,1521934854.197 [NAL9602](INFO): Powering down 2018-03-24T23:43:14.495Z,1521934994.495 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:43:14.495Z,1521934994.495 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 430 2018-03-24T23:43:14.495Z,1521934994.495 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:43:14.558Z,1521934994.558 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:43:14.870Z,1521934994.870 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:43:14.870Z,1521934994.870 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 430 2018-03-24T23:43:15.223Z,1521934995.223 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:43:15.224Z,1521934995.224 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:43:15.224Z,1521934995.224 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:44:45.573Z,1521935085.573 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-03-24T23:44:45.573Z,1521935085.573 [Default:CheckIn:C.Wait] Stopped 2018-03-24T23:44:45.573Z,1521935085.573 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-03-24T23:44:45.573Z,1521935085.573 [Default:CheckIn:D] Running Loop=1 2018-03-24T23:44:45.959Z,1521935085.959 [Default:CheckIn:D] Stopped 2018-03-24T23:44:45.959Z,1521935085.959 [Default:CheckIn:E] Running Loop=1 2018-03-24T23:44:46.362Z,1521935086.362 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 52.914490 min 2018-03-24T23:44:46.362Z,1521935086.362 [Default:CheckIn:E] Stopped 2018-03-24T23:44:46.362Z,1521935086.362 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-03-24T23:44:46.362Z,1521935086.362 [Default:CheckIn] Stopped 2018-03-24T23:44:46.362Z,1521935086.362 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-03-24T23:44:46.363Z,1521935086.363 [Default:CheckIn](INFO): Running loop #6 2018-03-24T23:44:46.363Z,1521935086.363 [Default:CheckIn] Running Loop=6 2018-03-24T23:44:46.363Z,1521935086.363 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-03-24T23:44:46.363Z,1521935086.363 [Default:CheckIn:Read_GPS] Running Loop=1 2018-03-24T23:44:47.065Z,1521935087.065 [NAL9602](INFO): Powering up 2018-03-24T23:44:58.214Z,1521935098.214 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:45:30.202Z,1521935130.202 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-03-24T23:45:30.285Z,1521935130.285 [NAL9602](FAULT): received: +CSQ:0 OK15, 2, 0, 0, 0 OK 2018-03-24T23:45:30.285Z,1521935130.285 [NAL9602] Data Fault, FailCount= 3 2018-03-24T23:45:30.285Z,1521935130.285 [NAL9602](ERROR): Data Fault 2018-03-24T23:45:30.429Z,1521935130.429 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-24T23:45:30.602Z,1521935130.602 [NAL9602](INFO): Powering down 2018-03-24T23:45:31.510Z,1521935131.510 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-24T23:45:31.511Z,1521935131.511 [NAL9602] No Fault, FailCount= 3 2018-03-24T23:45:38.220Z,1521935138.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:45:38.619Z,1521935138.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:45:39.018Z,1521935139.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-03-24T23:46:00.761Z,1521935160.761 [NAL9602](INFO): Powering up NAL9602 2018-03-24T23:46:11.950Z,1521935171.950 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:46:12.750Z,1521935172.750 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-03-24T23:46:12.750Z,1521935172.750 [NAL9602] Data Fault, FailCount= 4 2018-03-24T23:46:12.750Z,1521935172.750 [NAL9602](ERROR): Data Fault 2018-03-24T23:46:12.861Z,1521935172.861 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-24T23:46:13.150Z,1521935173.150 [NAL9602](INFO): Powering down 2018-03-24T23:46:14.065Z,1521935174.065 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-24T23:46:14.065Z,1521935174.065 [NAL9602] No Fault, FailCount= 4 2018-03-24T23:46:15.654Z,1521935175.654 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:46:15.654Z,1521935175.654 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 431 2018-03-24T23:46:15.654Z,1521935175.654 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:46:15.720Z,1521935175.720 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:46:16.071Z,1521935176.071 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:46:16.071Z,1521935176.071 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 431 2018-03-24T23:46:16.435Z,1521935176.435 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:46:16.436Z,1521935176.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:46:16.436Z,1521935176.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:46:43.162Z,1521935203.162 [NAL9602](INFO): Powering up NAL9602 2018-03-24T23:46:55.046Z,1521935215.046 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:49:16.601Z,1521935356.601 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:49:16.601Z,1521935356.601 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 432 2018-03-24T23:49:16.601Z,1521935356.601 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:49:16.672Z,1521935356.672 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:49:17.037Z,1521935357.037 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:49:17.037Z,1521935357.037 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 432 2018-03-24T23:49:17.408Z,1521935357.408 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:49:17.408Z,1521935357.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:49:17.413Z,1521935357.413 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:49:46.651Z,1521935386.651 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-24T23:44:46.4Z 2018-03-24T23:49:46.651Z,1521935386.651 [Default:CheckIn:Read_GPS] Stopped 2018-03-24T23:49:46.651Z,1521935386.651 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-03-24T23:49:56.146Z,1521935396.146 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180324T225150/Courier0020.lzma 2018-03-24T23:49:56.930Z,1521935396.930 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Courier0020.lzma.bak 2018-03-24T23:49:56.930Z,1521935396.930 [DataOverHttps](INFO): SBD MOMSN=8198702 2018-03-24T23:50:06.510Z,1521935406.510 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-03-24T23:50:15.895Z,1521935415.895 [DataOverHttps](INFO): Sending 253 bytes from file Logs/20180324T225150/Express0021.lzma 2018-03-24T23:50:16.678Z,1521935416.678 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Express0021.lzma.bak 2018-03-24T23:50:16.678Z,1521935416.678 [DataOverHttps](INFO): SBD MOMSN=8198704 2018-03-24T23:50:18.862Z,1521935418.862 [Default:CheckIn:Read_Iridium] Stopped 2018-03-24T23:50:18.862Z,1521935418.862 [Default:CheckIn:C.Wait] Running Loop=1 2018-03-24T23:50:18.863Z,1521935418.863 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-03-24T23:50:36.885Z,1521935436.885 [NAL9602](INFO): Powering down 2018-03-24T23:52:17.684Z,1521935537.684 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:52:17.684Z,1521935537.684 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 433 2018-03-24T23:52:17.684Z,1521935537.684 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:52:17.740Z,1521935537.740 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:52:18.128Z,1521935538.128 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:52:18.128Z,1521935538.128 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 433 2018-03-24T23:52:18.524Z,1521935538.524 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:52:18.525Z,1521935538.525 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:52:18.525Z,1521935538.525 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:55:18.643Z,1521935718.643 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:55:18.643Z,1521935718.643 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 434 2018-03-24T23:55:18.643Z,1521935718.643 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:55:18.725Z,1521935718.725 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:55:19.042Z,1521935719.042 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:55:19.042Z,1521935719.042 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 434 2018-03-24T23:55:19.419Z,1521935719.419 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:55:19.419Z,1521935719.419 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:55:19.420Z,1521935719.420 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:55:19.422Z,1521935719.422 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-03-24T23:55:19.422Z,1521935719.422 [Default:CheckIn:C.Wait] Stopped 2018-03-24T23:55:19.423Z,1521935719.423 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-03-24T23:55:19.424Z,1521935719.424 [Default:CheckIn:D] Running Loop=1 2018-03-24T23:55:19.831Z,1521935719.831 [Default:CheckIn:D] Stopped 2018-03-24T23:55:19.831Z,1521935719.831 [Default:CheckIn:E] Running Loop=1 2018-03-24T23:55:20.204Z,1521935720.204 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 63.479032 min 2018-03-24T23:55:20.213Z,1521935720.213 [Default:CheckIn:E] Stopped 2018-03-24T23:55:20.213Z,1521935720.213 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-03-24T23:55:20.213Z,1521935720.213 [Default:CheckIn] Stopped 2018-03-24T23:55:20.213Z,1521935720.213 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-03-24T23:55:20.213Z,1521935720.213 [Default:CheckIn](INFO): Running loop #7 2018-03-24T23:55:20.213Z,1521935720.213 [Default:CheckIn] Running Loop=7 2018-03-24T23:55:20.214Z,1521935720.214 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-03-24T23:55:20.214Z,1521935720.214 [Default:CheckIn:Read_GPS] Running Loop=1 2018-03-24T23:55:27.487Z,1521935727.487 [NAL9602](INFO): Powering up 2018-03-24T23:55:38.486Z,1521935738.486 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:56:10.486Z,1521935770.486 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-03-24T23:56:10.569Z,1521935770.569 [NAL9602](FAULT): received: +CSQ:0 OK15, 2, 0, 0, 0 OK 2018-03-24T23:56:10.569Z,1521935770.569 [NAL9602] Data Fault, FailCount= 5 2018-03-24T23:56:10.569Z,1521935770.569 [NAL9602](ERROR): Data Fault 2018-03-24T23:56:10.719Z,1521935770.719 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-24T23:56:10.720Z,1521935770.720 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-03-24T23:56:10.885Z,1521935770.885 [NAL9602](INFO): Powering down 2018-03-24T23:56:11.003Z,1521935771.003 [CBIT](INFO): Critical error at 20180324T235610 2018-03-24T23:58:10.880Z,1521935890.880 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-24T23:58:10.880Z,1521935890.880 [NAL9602] No Fault, FailCount= 5 2018-03-24T23:58:11.162Z,1521935891.162 [NAL9602](INFO): Powering up NAL9602 2018-03-24T23:58:19.646Z,1521935899.646 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-24T23:58:19.647Z,1521935899.647 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 435 2018-03-24T23:58:19.647Z,1521935899.647 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-24T23:58:19.714Z,1521935899.714 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-24T23:58:20.067Z,1521935900.067 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-24T23:58:20.068Z,1521935900.068 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 435 2018-03-24T23:58:20.452Z,1521935900.452 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-24T23:58:20.453Z,1521935900.453 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-24T23:58:20.453Z,1521935900.453 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-24T23:58:28.590Z,1521935908.590 [NAL9602](INFO): NAL9602 initialized 2018-03-24T23:58:29.373Z,1521935909.373 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-03-24T23:58:29.373Z,1521935909.373 [NAL9602] Data Fault, FailCount= 1 2018-03-24T23:58:29.373Z,1521935909.373 [NAL9602](ERROR): Data Fault 2018-03-24T23:58:29.517Z,1521935909.517 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-24T23:58:29.773Z,1521935909.773 [NAL9602](INFO): Powering down 2018-03-24T23:58:30.718Z,1521935910.718 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-24T23:58:30.718Z,1521935910.718 [NAL9602] No Fault, FailCount= 1 2018-03-24T23:59:00.186Z,1521935940.186 [NAL9602](INFO): Powering up NAL9602 2018-03-24T23:59:11.374Z,1521935951.374 [NAL9602](INFO): NAL9602 initialized 2018-03-25T00:00:20.252Z,1521936020.252 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-24T23:55:20.2Z 2018-03-25T00:00:20.252Z,1521936020.252 [Default:CheckIn:Read_GPS] Stopped 2018-03-25T00:00:20.261Z,1521936020.261 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-03-25T00:00:29.428Z,1521936029.428 [NAL9602](INFO): SBD MO Status=2, MOMSN=7215, MT Status=2, MTMSN=0 2018-03-25T00:00:29.428Z,1521936029.428 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2 2018-03-25T00:00:29.597Z,1521936029.597 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180324T225150/Courier0024.lzma 2018-03-25T00:00:30.394Z,1521936030.394 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Courier0024.lzma.bak 2018-03-25T00:00:30.394Z,1521936030.394 [DataOverHttps](INFO): SBD MOMSN=8198759 2018-03-25T00:00:39.898Z,1521936039.898 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2018-03-25T00:00:39.898Z,1521936039.898 [PNI_TCM] Data Fault, FailCount= 1 2018-03-25T00:00:39.899Z,1521936039.899 [PNI_TCM](ERROR): Data Fault 2018-03-25T00:00:39.975Z,1521936039.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.055302 seconds old. 2018-03-25T00:00:39.990Z,1521936039.990 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.060215 seconds old. 2018-03-25T00:00:39.992Z,1521936039.992 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.060593 seconds old. 2018-03-25T00:00:40.049Z,1521936040.049 [CBIT](ERROR): Data Fault in component: PNI_TCM 2018-03-25T00:00:40.108Z,1521936040.108 [PNI_TCM](INFO): Powering down 2018-03-25T00:00:40.230Z,1521936040.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.310881 seconds old. 2018-03-25T00:00:40.237Z,1521936040.237 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.302796 seconds old. 2018-03-25T00:00:40.239Z,1521936040.239 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.307534 seconds old. 2018-03-25T00:00:40.512Z,1521936040.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.592292 seconds old. 2018-03-25T00:00:40.518Z,1521936040.518 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.588599 seconds old. 2018-03-25T00:00:40.553Z,1521936040.553 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.588951 seconds old. 2018-03-25T00:00:40.906Z,1521936040.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.986674 seconds old. 2018-03-25T00:00:40.909Z,1521936040.909 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.978622 seconds old. 2018-03-25T00:00:40.947Z,1521936040.947 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.015009 seconds old. 2018-03-25T00:00:41.312Z,1521936041.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.392126 seconds old. 2018-03-25T00:00:41.319Z,1521936041.319 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.388914 seconds old. 2018-03-25T00:00:41.341Z,1521936041.341 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.409697 seconds old. 2018-03-25T00:00:41.378Z,1521936041.378 [CBIT](INFO): Clearing failed state for component PNI_TCM 2018-03-25T00:00:41.378Z,1521936041.378 [PNI_TCM] No Fault, FailCount= 1 2018-03-25T00:00:41.739Z,1521936041.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.819640 seconds old. 2018-03-25T00:00:41.746Z,1521936041.746 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.815979 seconds old. 2018-03-25T00:00:41.748Z,1521936041.748 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.816369 seconds old. 2018-03-25T00:00:48.922Z,1521936048.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 16.002738 seconds old. 2018-03-25T00:00:48.941Z,1521936048.941 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.994685 seconds old. 2018-03-25T00:00:48.943Z,1521936048.943 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.011550 seconds old. 2018-03-25T00:00:48.976Z,1521936048.976 [DataOverHttps](INFO): Sending 252 bytes from file Logs/20180324T225150/Express0025.lzma 2018-03-25T00:00:49.072Z,1521936049.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 16.152739 seconds old. 2018-03-25T00:00:49.079Z,1521936049.079 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.149574 seconds old. 2018-03-25T00:00:49.111Z,1521936049.111 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.179741 seconds old. 2018-03-25T00:00:49.420Z,1521936049.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 16.500310 seconds old. 2018-03-25T00:00:49.433Z,1521936049.433 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.503282 seconds old. 2018-03-25T00:00:49.435Z,1521936049.435 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.503729 seconds old. 2018-03-25T00:00:49.778Z,1521936049.778 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Express0025.lzma.bak 2018-03-25T00:00:49.778Z,1521936049.778 [DataOverHttps](INFO): SBD MOMSN=8198762 2018-03-25T00:00:49.863Z,1521936049.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 16.943008 seconds old. 2018-03-25T00:00:49.874Z,1521936049.874 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.943928 seconds old. 2018-03-25T00:00:49.876Z,1521936049.876 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.944567 seconds old. 2018-03-25T00:00:51.967Z,1521936051.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 19.047701 seconds old. 2018-03-25T00:00:51.986Z,1521936051.986 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.056343 seconds old. 2018-03-25T00:00:52.017Z,1521936052.017 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.056800 seconds old. 2018-03-25T00:00:52.033Z,1521936052.033 [Default:CheckIn:Read_Iridium] Stopped 2018-03-25T00:00:52.033Z,1521936052.033 [Default:CheckIn:C.Wait] Running Loop=1 2018-03-25T00:00:52.033Z,1521936052.033 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-03-25T00:00:59.009Z,1521936059.009 [NAL9602](INFO): SBD MO Status=2, MOMSN=7215, MT Status=2, MTMSN=0 2018-03-25T00:00:59.009Z,1521936059.009 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2 2018-03-25T00:00:59.177Z,1521936059.177 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-03-25T00:01:20.870Z,1521936080.870 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:01:20.871Z,1521936080.871 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 436 2018-03-25T00:01:20.871Z,1521936080.871 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:01:20.945Z,1521936080.945 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:01:21.263Z,1521936081.263 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:01:21.263Z,1521936081.263 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 436 2018-03-25T00:01:21.632Z,1521936081.632 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:01:21.637Z,1521936081.637 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:01:21.638Z,1521936081.638 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:01:29.953Z,1521936089.953 [NAL9602](INFO): Powering down 2018-03-25T00:04:21.663Z,1521936261.663 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:04:21.663Z,1521936261.663 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 437 2018-03-25T00:04:21.664Z,1521936261.664 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:04:21.737Z,1521936261.737 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:04:22.084Z,1521936262.084 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:04:22.084Z,1521936262.084 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 437 2018-03-25T00:04:22.483Z,1521936262.483 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:04:22.483Z,1521936262.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:04:22.483Z,1521936262.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:05:52.365Z,1521936352.365 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-03-25T00:05:52.365Z,1521936352.365 [Default:CheckIn:C.Wait] Stopped 2018-03-25T00:05:52.365Z,1521936352.365 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-03-25T00:05:52.367Z,1521936352.367 [Default:CheckIn:D] Running Loop=1 2018-03-25T00:05:52.770Z,1521936352.770 [Default:CheckIn:D] Stopped 2018-03-25T00:05:52.770Z,1521936352.770 [Default:CheckIn:E] Running Loop=1 2018-03-25T00:05:53.169Z,1521936353.169 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 74.028019 min 2018-03-25T00:05:53.170Z,1521936353.170 [Default:CheckIn:E] Stopped 2018-03-25T00:05:53.170Z,1521936353.170 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-03-25T00:05:53.170Z,1521936353.170 [Default:CheckIn] Stopped 2018-03-25T00:05:53.170Z,1521936353.170 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-03-25T00:05:53.170Z,1521936353.170 [Default:CheckIn](INFO): Running loop #8 2018-03-25T00:05:53.170Z,1521936353.170 [Default:CheckIn] Running Loop=8 2018-03-25T00:05:53.170Z,1521936353.170 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-03-25T00:05:53.171Z,1521936353.171 [Default:CheckIn:Read_GPS] Running Loop=1 2018-03-25T00:06:00.478Z,1521936360.478 [NAL9602](INFO): Powering up 2018-03-25T00:06:11.402Z,1521936371.402 [NAL9602](INFO): NAL9602 initialized 2018-03-25T00:07:22.650Z,1521936442.650 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:07:22.650Z,1521936442.650 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 438 2018-03-25T00:07:22.650Z,1521936442.650 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:07:22.684Z,1521936442.684 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:07:23.076Z,1521936443.076 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:07:23.076Z,1521936443.076 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 438 2018-03-25T00:07:23.428Z,1521936443.428 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:07:23.428Z,1521936443.428 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:07:23.433Z,1521936443.433 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:10:23.607Z,1521936623.607 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:10:23.608Z,1521936623.608 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 439 2018-03-25T00:10:23.608Z,1521936623.608 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:10:23.656Z,1521936623.656 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:10:24.088Z,1521936624.088 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:10:24.088Z,1521936624.088 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 439 2018-03-25T00:10:24.371Z,1521936624.371 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:10:24.372Z,1521936624.372 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:10:24.372Z,1521936624.372 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:10:53.171Z,1521936653.171 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-25T00:05:53.2Z 2018-03-25T00:10:53.172Z,1521936653.172 [Default:CheckIn:Read_GPS] Stopped 2018-03-25T00:10:53.172Z,1521936653.172 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-03-25T00:11:02.442Z,1521936662.442 [NAL9602](INFO): SBD MO Status=2, MOMSN=7215, MT Status=2, MTMSN=0 2018-03-25T00:11:02.442Z,1521936662.442 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2 2018-03-25T00:11:02.579Z,1521936662.579 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180324T225150/Courier0028.lzma 2018-03-25T00:11:03.383Z,1521936663.383 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Courier0028.lzma.bak 2018-03-25T00:11:03.383Z,1521936663.383 [DataOverHttps](INFO): SBD MOMSN=8198801 2018-03-25T00:11:22.044Z,1521936682.044 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-03-25T00:11:22.208Z,1521936682.208 [DataOverHttps](INFO): Sending 221 bytes from file Logs/20180324T225150/Express0029.lzma 2018-03-25T00:11:23.010Z,1521936683.010 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Express0029.lzma.bak 2018-03-25T00:11:23.010Z,1521936683.010 [DataOverHttps](INFO): SBD MOMSN=8198803 2018-03-25T00:11:25.367Z,1521936685.367 [Default:CheckIn:Read_Iridium] Stopped 2018-03-25T00:11:25.367Z,1521936685.367 [Default:CheckIn:C.Wait] Running Loop=1 2018-03-25T00:11:25.367Z,1521936685.367 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-03-25T00:11:52.565Z,1521936712.565 [NAL9602](INFO): Powering down 2018-03-25T00:13:24.631Z,1521936804.631 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:13:24.631Z,1521936804.631 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 440 2018-03-25T00:13:24.631Z,1521936804.631 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:13:24.690Z,1521936804.690 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:13:25.137Z,1521936805.137 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:13:25.137Z,1521936805.137 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 440 2018-03-25T00:13:25.446Z,1521936805.446 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:13:25.446Z,1521936805.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:13:25.446Z,1521936805.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:16:25.767Z,1521936985.767 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:16:25.767Z,1521936985.767 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 441 2018-03-25T00:16:25.767Z,1521936985.767 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:16:25.818Z,1521936985.818 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-03-25T00:16:25.818Z,1521936985.818 [Default:CheckIn:C.Wait] Stopped 2018-03-25T00:16:25.818Z,1521936985.818 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-03-25T00:16:25.818Z,1521936985.818 [Default:CheckIn:D] Running Loop=1 2018-03-25T00:16:25.829Z,1521936985.829 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:16:26.169Z,1521936986.169 [Default:CheckIn:D] Stopped 2018-03-25T00:16:26.169Z,1521936986.169 [Default:CheckIn:E] Running Loop=1 2018-03-25T00:16:26.199Z,1521936986.199 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:16:26.199Z,1521936986.199 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 441 2018-03-25T00:16:26.559Z,1521936986.559 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:16:26.560Z,1521936986.560 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:16:26.560Z,1521936986.560 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:16:26.563Z,1521936986.563 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 84.584587 min 2018-03-25T00:16:26.563Z,1521936986.563 [Default:CheckIn:E] Stopped 2018-03-25T00:16:26.563Z,1521936986.563 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-03-25T00:16:26.563Z,1521936986.563 [Default:CheckIn] Stopped 2018-03-25T00:16:26.563Z,1521936986.563 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-03-25T00:16:26.564Z,1521936986.564 [Default:CheckIn](INFO): Running loop #9 2018-03-25T00:16:26.564Z,1521936986.564 [Default:CheckIn] Running Loop=9 2018-03-25T00:16:26.564Z,1521936986.564 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-03-25T00:16:26.564Z,1521936986.564 [Default:CheckIn:Read_GPS] Running Loop=1 2018-03-25T00:16:33.562Z,1521936993.562 [NAL9602](INFO): Powering up 2018-03-25T00:16:44.758Z,1521937004.758 [NAL9602](INFO): NAL9602 initialized 2018-03-25T00:16:45.558Z,1521937005.558 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-03-25T00:16:45.558Z,1521937005.558 [NAL9602] Data Fault, FailCount= 2 2018-03-25T00:16:45.558Z,1521937005.558 [NAL9602](ERROR): Data Fault 2018-03-25T00:16:45.698Z,1521937005.698 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-25T00:16:45.957Z,1521937005.957 [NAL9602](INFO): Powering down 2018-03-25T00:16:46.860Z,1521937006.860 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-25T00:16:46.860Z,1521937006.860 [NAL9602] No Fault, FailCount= 2 2018-03-25T00:17:16.357Z,1521937036.357 [NAL9602](INFO): Powering up NAL9602 2018-03-25T00:17:33.958Z,1521937053.958 [NAL9602](INFO): NAL9602 initialized 2018-03-25T00:18:06.347Z,1521937086.347 [NAL9602](INFO): SBD MO Status=2, MOMSN=7215, MT Status=2, MTMSN=0 2018-03-25T00:18:06.347Z,1521937086.347 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2 2018-03-25T00:19:26.689Z,1521937166.689 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:19:26.689Z,1521937166.689 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 442 2018-03-25T00:19:26.689Z,1521937166.689 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:19:26.769Z,1521937166.769 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:19:27.158Z,1521937167.158 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:19:27.158Z,1521937167.158 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 442 2018-03-25T00:19:27.492Z,1521937167.492 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:19:27.492Z,1521937167.492 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:19:27.492Z,1521937167.492 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:19:34.248Z,1521937174.248 [NAL9602](INFO): SBD MO Status=2, MOMSN=7215, MT Status=2, MTMSN=0 2018-03-25T00:19:34.248Z,1521937174.248 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2 2018-03-25T00:20:34.621Z,1521937234.621 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2018-03-25T00:20:34.621Z,1521937234.621 [PNI_TCM] Data Fault, FailCount= 1 2018-03-25T00:20:34.621Z,1521937234.621 [PNI_TCM](ERROR): Data Fault 2018-03-25T00:20:34.675Z,1521937234.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.020839 seconds old. 2018-03-25T00:20:34.694Z,1521937234.694 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.038346 seconds old. 2018-03-25T00:20:34.721Z,1521937234.721 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.034337 seconds old. 2018-03-25T00:20:34.770Z,1521937234.770 [CBIT](ERROR): Data Fault in component: PNI_TCM 2018-03-25T00:20:34.849Z,1521937234.849 [PNI_TCM](INFO): Powering down 2018-03-25T00:20:34.961Z,1521937234.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.302385 seconds old. 2018-03-25T00:20:34.963Z,1521937234.963 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.307534 seconds old. 2018-03-25T00:20:34.970Z,1521937234.970 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.307896 seconds old. 2018-03-25T00:20:35.254Z,1521937235.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.600206 seconds old. 2018-03-25T00:20:35.256Z,1521937235.256 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.600549 seconds old. 2018-03-25T00:20:35.269Z,1521937235.269 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.607006 seconds old. 2018-03-25T00:20:35.634Z,1521937235.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.980112 seconds old. 2018-03-25T00:20:35.641Z,1521937235.641 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.980535 seconds old. 2018-03-25T00:20:35.643Z,1521937235.643 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.981064 seconds old. 2018-03-25T00:20:36.027Z,1521937236.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.372894 seconds old. 2018-03-25T00:20:36.034Z,1521937236.034 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.377665 seconds old. 2018-03-25T00:20:36.036Z,1521937236.036 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.373662 seconds old. 2018-03-25T00:20:36.089Z,1521937236.089 [CBIT](INFO): Clearing failed state for component PNI_TCM 2018-03-25T00:20:36.089Z,1521937236.089 [PNI_TCM] No Fault, FailCount= 1 2018-03-25T00:20:36.456Z,1521937236.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.801697 seconds old. 2018-03-25T00:20:36.472Z,1521937236.472 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.815839 seconds old. 2018-03-25T00:20:36.474Z,1521937236.474 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.811904 seconds old. 2018-03-25T00:20:36.830Z,1521937236.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.176321 seconds old. 2018-03-25T00:20:36.837Z,1521937236.837 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.176727 seconds old. 2018-03-25T00:20:36.839Z,1521937236.839 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.177090 seconds old. 2018-03-25T00:20:37.243Z,1521937237.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.588719 seconds old. 2018-03-25T00:20:37.249Z,1521937237.249 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.593449 seconds old. 2018-03-25T00:20:37.252Z,1521937237.252 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.589463 seconds old. 2018-03-25T00:20:37.676Z,1521937237.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.022165 seconds old. 2018-03-25T00:20:37.679Z,1521937237.679 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.022677 seconds old. 2018-03-25T00:20:37.681Z,1521937237.681 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.018723 seconds old. 2018-03-25T00:20:38.016Z,1521937238.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.362251 seconds old. 2018-03-25T00:20:38.039Z,1521937238.039 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.383044 seconds old. 2018-03-25T00:20:38.050Z,1521937238.050 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.387413 seconds old. 2018-03-25T00:20:38.448Z,1521937238.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.794289 seconds old. 2018-03-25T00:20:38.456Z,1521937238.456 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.799877 seconds old. 2018-03-25T00:20:38.467Z,1521937238.467 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.804391 seconds old. 2018-03-25T00:20:38.854Z,1521937238.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.199890 seconds old. 2018-03-25T00:20:38.856Z,1521937238.856 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.200327 seconds old. 2018-03-25T00:20:38.869Z,1521937238.869 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.206983 seconds old. 2018-03-25T00:20:39.258Z,1521937239.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.603739 seconds old. 2018-03-25T00:20:39.260Z,1521937239.260 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.604175 seconds old. 2018-03-25T00:20:39.267Z,1521937239.267 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.604556 seconds old. 2018-03-25T00:21:26.884Z,1521937286.884 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-25T00:16:26.6Z 2018-03-25T00:21:26.884Z,1521937286.884 [Default:CheckIn:Read_GPS] Stopped 2018-03-25T00:21:26.890Z,1521937286.890 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-03-25T00:21:36.224Z,1521937296.224 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180324T225150/Courier0032.lzma 2018-03-25T00:21:37.013Z,1521937297.013 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Courier0032.lzma.bak 2018-03-25T00:21:37.014Z,1521937297.014 [DataOverHttps](INFO): SBD MOMSN=8198860 2018-03-25T00:21:55.897Z,1521937315.897 [DataOverHttps](INFO): Sending 235 bytes from file Logs/20180324T225150/Express0033.lzma 2018-03-25T00:21:56.698Z,1521937316.698 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Express0033.lzma.bak 2018-03-25T00:21:56.698Z,1521937316.698 [DataOverHttps](INFO): SBD MOMSN=8198866 2018-03-25T00:21:58.891Z,1521937318.891 [Default:CheckIn:Read_Iridium] Stopped 2018-03-25T00:21:58.891Z,1521937318.891 [Default:CheckIn:C.Wait] Running Loop=1 2018-03-25T00:21:58.891Z,1521937318.891 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-03-25T00:22:27.684Z,1521937347.684 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:22:27.684Z,1521937347.684 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 443 2018-03-25T00:22:27.684Z,1521937347.684 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:22:27.723Z,1521937347.723 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:22:28.148Z,1521937348.148 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:22:28.148Z,1521937348.148 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 443 2018-03-25T00:22:28.641Z,1521937348.641 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:22:28.642Z,1521937348.642 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:22:28.642Z,1521937348.642 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:22:36.825Z,1521937356.825 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-03-25T00:23:07.429Z,1521937387.429 [NAL9602](INFO): Powering down 2018-03-25T00:25:28.845Z,1521937528.845 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:25:28.845Z,1521937528.845 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 444 2018-03-25T00:25:28.845Z,1521937528.845 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:25:28.896Z,1521937528.896 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:25:29.279Z,1521937529.279 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:25:29.279Z,1521937529.279 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 444 2018-03-25T00:25:29.639Z,1521937529.639 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:25:29.639Z,1521937529.639 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:25:29.639Z,1521937529.639 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:26:59.266Z,1521937619.266 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-03-25T00:26:59.266Z,1521937619.266 [Default:CheckIn:C.Wait] Stopped 2018-03-25T00:26:59.266Z,1521937619.266 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-03-25T00:26:59.268Z,1521937619.268 [Default:CheckIn:D] Running Loop=1 2018-03-25T00:26:59.669Z,1521937619.669 [Default:CheckIn:D] Stopped 2018-03-25T00:26:59.670Z,1521937619.670 [Default:CheckIn:E] Running Loop=1 2018-03-25T00:27:00.042Z,1521937620.042 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 95.143001 min 2018-03-25T00:27:00.042Z,1521937620.042 [Default:CheckIn:E] Stopped 2018-03-25T00:27:00.042Z,1521937620.042 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-03-25T00:27:00.042Z,1521937620.042 [Default:CheckIn] Stopped 2018-03-25T00:27:00.042Z,1521937620.042 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-03-25T00:27:00.042Z,1521937620.042 [Default:CheckIn](INFO): Running loop #10 2018-03-25T00:27:00.042Z,1521937620.042 [Default:CheckIn] Running Loop=10 2018-03-25T00:27:00.043Z,1521937620.043 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-03-25T00:27:00.043Z,1521937620.043 [Default:CheckIn:Read_GPS] Running Loop=1 2018-03-25T00:27:07.096Z,1521937627.096 [NAL9602](INFO): Powering up 2018-03-25T00:27:18.290Z,1521937638.290 [NAL9602](INFO): NAL9602 initialized 2018-03-25T00:27:33.559Z,1521937653.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.407663 seconds old. 2018-03-25T00:27:33.570Z,1521937653.570 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.404939 seconds old. 2018-03-25T00:27:33.572Z,1521937653.572 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.405297 seconds old. 2018-03-25T00:27:33.983Z,1521937653.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.831196 seconds old. 2018-03-25T00:27:34.009Z,1521937654.009 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.844263 seconds old. 2018-03-25T00:27:34.012Z,1521937654.012 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.844606 seconds old. 2018-03-25T00:27:34.398Z,1521937654.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.246536 seconds old. 2018-03-25T00:27:34.417Z,1521937654.417 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.235314 seconds old. 2018-03-25T00:27:34.419Z,1521937654.419 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.252281 seconds old. 2018-03-25T00:27:50.290Z,1521937670.290 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-03-25T00:27:50.373Z,1521937670.373 [NAL9602](FAULT): received: +CSQ:0 OK15, 2, 0, 0, 0 OK 2018-03-25T00:27:50.373Z,1521937670.373 [NAL9602] Data Fault, FailCount= 3 2018-03-25T00:27:50.373Z,1521937670.373 [NAL9602](ERROR): Data Fault 2018-03-25T00:27:50.490Z,1521937670.490 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-25T00:27:50.689Z,1521937670.689 [NAL9602](INFO): Powering down 2018-03-25T00:27:51.634Z,1521937671.634 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-25T00:27:51.634Z,1521937671.634 [NAL9602] No Fault, FailCount= 3 2018-03-25T00:28:20.986Z,1521937700.986 [NAL9602](INFO): Powering up NAL9602 2018-03-25T00:28:29.877Z,1521937709.877 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:28:29.877Z,1521937709.877 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 445 2018-03-25T00:28:29.877Z,1521937709.877 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:28:29.889Z,1521937709.889 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:28:30.307Z,1521937710.307 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:28:30.307Z,1521937710.307 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 445 2018-03-25T00:28:30.646Z,1521937710.646 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:28:30.646Z,1521937710.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:28:30.647Z,1521937710.647 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:28:32.190Z,1521937712.190 [NAL9602](INFO): NAL9602 initialized 2018-03-25T00:28:32.986Z,1521937712.986 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-03-25T00:28:32.986Z,1521937712.986 [NAL9602] Data Fault, FailCount= 4 2018-03-25T00:28:32.986Z,1521937712.986 [NAL9602](ERROR): Data Fault 2018-03-25T00:28:33.100Z,1521937713.100 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-25T00:28:33.385Z,1521937713.385 [NAL9602](INFO): Powering down 2018-03-25T00:28:34.297Z,1521937714.297 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-25T00:28:34.297Z,1521937714.297 [NAL9602] No Fault, FailCount= 4 2018-03-25T00:29:07.543Z,1521937747.543 [NAL9602](INFO): Powering up NAL9602 2018-03-25T00:29:18.542Z,1521937758.542 [NAL9602](INFO): NAL9602 initialized 2018-03-25T00:31:30.855Z,1521937890.855 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:31:30.855Z,1521937890.855 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 446 2018-03-25T00:31:30.855Z,1521937890.855 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:31:30.879Z,1521937890.879 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:31:31.263Z,1521937891.263 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:31:31.264Z,1521937891.264 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 446 2018-03-25T00:31:31.623Z,1521937891.623 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:31:31.624Z,1521937891.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:31:31.624Z,1521937891.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:32:00.058Z,1521937920.058 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-25T00:27:00.0Z 2018-03-25T00:32:00.058Z,1521937920.058 [Default:CheckIn:Read_GPS] Stopped 2018-03-25T00:32:00.060Z,1521937920.060 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-03-25T00:32:09.479Z,1521937929.479 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180324T225150/Courier0036.lzma 2018-03-25T00:32:10.282Z,1521937930.282 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Courier0036.lzma.bak 2018-03-25T00:32:10.282Z,1521937930.282 [DataOverHttps](INFO): SBD MOMSN=8198936 2018-03-25T00:32:21.859Z,1521937941.859 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-03-25T00:32:28.985Z,1521937948.985 [DataOverHttps](INFO): Sending 253 bytes from file Logs/20180324T225150/Express0037.lzma 2018-03-25T00:32:29.769Z,1521937949.769 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Express0037.lzma.bak 2018-03-25T00:32:29.770Z,1521937949.770 [DataOverHttps](INFO): SBD MOMSN=8198938 2018-03-25T00:32:32.197Z,1521937952.197 [Default:CheckIn:Read_Iridium] Stopped 2018-03-25T00:32:32.197Z,1521937952.197 [Default:CheckIn:C.Wait] Running Loop=1 2018-03-25T00:32:32.197Z,1521937952.197 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-03-25T00:32:59.117Z,1521937979.117 [NAL9602](INFO): Powering down 2018-03-25T00:34:31.954Z,1521938071.954 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:34:31.954Z,1521938071.954 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 447 2018-03-25T00:34:31.954Z,1521938071.954 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:34:31.996Z,1521938071.996 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:34:32.390Z,1521938072.390 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:34:32.390Z,1521938072.390 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 447 2018-03-25T00:34:32.696Z,1521938072.696 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:34:32.733Z,1521938072.733 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:34:32.733Z,1521938072.733 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:37:32.669Z,1521938252.669 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-03-25T00:37:32.669Z,1521938252.669 [Default:CheckIn:C.Wait] Stopped 2018-03-25T00:37:32.669Z,1521938252.669 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-03-25T00:37:32.670Z,1521938252.670 [Default:CheckIn:D] Running Loop=1 2018-03-25T00:37:33.071Z,1521938253.071 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:37:33.071Z,1521938253.071 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 448 2018-03-25T00:37:33.071Z,1521938253.071 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:37:33.074Z,1521938253.074 [Default:CheckIn:D] Stopped 2018-03-25T00:37:33.074Z,1521938253.074 [Default:CheckIn:E] Running Loop=1 2018-03-25T00:37:33.154Z,1521938253.154 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:37:33.470Z,1521938253.470 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 105.699740 min 2018-03-25T00:37:33.471Z,1521938253.471 [Default:CheckIn:E] Stopped 2018-03-25T00:37:33.471Z,1521938253.471 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-03-25T00:37:33.471Z,1521938253.471 [Default:CheckIn] Stopped 2018-03-25T00:37:33.471Z,1521938253.471 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-03-25T00:37:33.471Z,1521938253.471 [Default:CheckIn](INFO): Running loop #11 2018-03-25T00:37:33.471Z,1521938253.471 [Default:CheckIn] Running Loop=11 2018-03-25T00:37:33.471Z,1521938253.471 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-03-25T00:37:33.471Z,1521938253.471 [Default:CheckIn:Read_GPS] Running Loop=1 2018-03-25T00:37:33.498Z,1521938253.498 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:37:33.498Z,1521938253.498 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 448 2018-03-25T00:37:33.871Z,1521938253.871 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:37:33.872Z,1521938253.872 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:37:33.873Z,1521938253.873 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:37:40.714Z,1521938260.714 [NAL9602](INFO): Powering up 2018-03-25T00:37:51.658Z,1521938271.658 [NAL9602](INFO): NAL9602 initialized 2018-03-25T00:38:23.274Z,1521938303.274 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-03-25T00:38:23.362Z,1521938303.362 [NAL9602](FAULT): received: +CSQ:0 OK15, 2, 0, 0, 0 OK 2018-03-25T00:38:23.362Z,1521938303.362 [NAL9602] Data Fault, FailCount= 5 2018-03-25T00:38:23.362Z,1521938303.362 [NAL9602](ERROR): Data Fault 2018-03-25T00:38:23.462Z,1521938303.462 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-25T00:38:23.462Z,1521938303.462 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-03-25T00:38:23.662Z,1521938303.662 [NAL9602](INFO): Powering down 2018-03-25T00:38:23.786Z,1521938303.786 [CBIT](INFO): Critical error at 20180325T003823 2018-03-25T00:40:23.687Z,1521938423.687 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-25T00:40:23.687Z,1521938423.687 [NAL9602] No Fault, FailCount= 5 2018-03-25T00:40:23.962Z,1521938423.962 [NAL9602](INFO): Powering up NAL9602 2018-03-25T00:40:34.019Z,1521938434.019 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:40:34.020Z,1521938434.020 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 449 2018-03-25T00:40:34.020Z,1521938434.020 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:40:34.082Z,1521938434.082 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:40:34.474Z,1521938434.474 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:40:34.474Z,1521938434.474 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 449 2018-03-25T00:40:34.877Z,1521938434.877 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:40:34.877Z,1521938434.877 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:40:34.878Z,1521938434.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:40:41.807Z,1521938441.807 [NAL9602](INFO): NAL9602 initialized 2018-03-25T00:40:42.358Z,1521938442.358 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-03-25T00:40:42.358Z,1521938442.358 [NAL9602] Data Fault, FailCount= 1 2018-03-25T00:40:42.358Z,1521938442.358 [NAL9602](ERROR): Data Fault 2018-03-25T00:40:42.493Z,1521938442.493 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-25T00:40:42.763Z,1521938442.763 [NAL9602](INFO): Powering down 2018-03-25T00:40:43.673Z,1521938443.673 [CBIT](INFO): Clearing failed state for component NAL9602 2018-03-25T00:40:43.673Z,1521938443.673 [NAL9602] No Fault, FailCount= 1 2018-03-25T00:41:13.166Z,1521938473.166 [NAL9602](INFO): Powering up NAL9602 2018-03-25T00:41:24.354Z,1521938484.354 [NAL9602](INFO): NAL9602 initialized 2018-03-25T00:42:33.500Z,1521938553.500 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-25T00:37:33.5Z 2018-03-25T00:42:33.500Z,1521938553.500 [Default:CheckIn:Read_GPS] Stopped 2018-03-25T00:42:33.521Z,1521938553.521 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-03-25T00:42:42.927Z,1521938562.927 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180324T225150/Courier0040.lzma 2018-03-25T00:42:43.710Z,1521938563.710 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Courier0040.lzma.bak 2018-03-25T00:42:43.710Z,1521938563.710 [DataOverHttps](INFO): SBD MOMSN=8198991 2018-03-25T00:42:55.026Z,1521938575.026 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-03-25T00:43:02.457Z,1521938582.457 [DataOverHttps](INFO): Sending 254 bytes from file Logs/20180324T225150/Express0041.lzma 2018-03-25T00:43:03.238Z,1521938583.238 [DataOverHttps](INFO): Moved sent file to Logs/20180324T225150/Express0041.lzma.bak 2018-03-25T00:43:03.238Z,1521938583.238 [DataOverHttps](INFO): SBD MOMSN=8198994 2018-03-25T00:43:05.467Z,1521938585.467 [Default:CheckIn:Read_Iridium] Stopped 2018-03-25T00:43:05.467Z,1521938585.467 [Default:CheckIn:C.Wait] Running Loop=1 2018-03-25T00:43:05.467Z,1521938585.467 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-03-25T00:43:32.421Z,1521938612.421 [NAL9602](INFO): Powering down 2018-03-25T00:43:34.900Z,1521938614.900 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:43:34.900Z,1521938614.900 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 450 2018-03-25T00:43:34.900Z,1521938614.900 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:43:34.935Z,1521938614.935 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:43:35.308Z,1521938615.308 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:43:35.309Z,1521938615.309 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 450 2018-03-25T00:43:35.690Z,1521938615.690 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:43:35.690Z,1521938615.690 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:43:35.691Z,1521938615.691 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:46:35.755Z,1521938795.755 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-03-25T00:46:35.755Z,1521938795.755 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 451 2018-03-25T00:46:35.755Z,1521938795.755 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-03-25T00:46:35.814Z,1521938795.814 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-03-25T00:46:36.172Z,1521938796.172 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-03-25T00:46:36.172Z,1521938796.172 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 451 2018-03-25T00:46:36.532Z,1521938796.532 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-03-25T00:46:36.537Z,1521938796.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-03-25T00:46:36.537Z,1521938796.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-03-25T00:48:06.019Z,1521938886.019 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-03-25T00:48:06.019Z,1521938886.019 [Default:CheckIn:C.Wait] Stopped 2018-03-25T00:48:06.019Z,1521938886.019 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-03-25T00:48:06.020Z,1521938886.020 [Default:CheckIn:D] Running Loop=1 2018-03-25T00:48:06.431Z,1521938886.431 [Default:CheckIn:D] Stopped 2018-03-25T00:48:06.431Z,1521938886.431 [Default:CheckIn:E] Running Loop=1 2018-03-25T00:48:06.835Z,1521938886.835 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 116.255705 min 2018-03-25T00:48:06.835Z,1521938886.835 [Default:CheckIn:E] Stopped 2018-03-25T00:48:06.836Z,1521938886.836 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-03-25T00:48:06.836Z,1521938886.836 [Default:CheckIn] Stopped 2018-03-25T00:48:06.836Z,1521938886.836 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-03-25T00:48:06.836Z,1521938886.836 [Default:CheckIn](INFO): Running loop #12 2018-03-25T00:48:06.836Z,1521938886.836 [Default:CheckIn] Running Loop=12 2018-03-25T00:48:06.836Z,1521938886.836 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-03-25T00:48:06.836Z,1521938886.836 [Default:CheckIn:Read_GPS] Running Loop=1 2018-03-25T00:48:14.203Z,1521938894.203 [NAL9602](INFO): Powering up 2018-03-25T00:48:25.130Z,1521938905.130 [NAL9602](INFO): NAL9602 initialized 2018-03-25T00:48:56.742Z,1521938936.742 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-03-25T00:48:56.813Z,1521938936.813 [NAL9602](FAULT): received: +CSQ:0 OK15, 2, 0, 0, 0 OK 2018-03-25T00:48:56.813Z,1521938936.813 [NAL9602] Data Fault, FailCount= 2 2018-03-25T00:48:56.813Z,1521938936.813 [NAL9602](ERROR): Data Fault 2018-03-25T00:48:56.969Z,1521938936.969 [CBIT](ERROR): Data Fault in component: NAL9602 2018-03-25T00:48:57.125Z,1521938937.125 [NAL9602](INFO): Poweri