2017-11-14T18:44:53.377Z,1510685093.377 [Supervisor](DEBUG): Initializing supervisor.
2017-11-14T18:44:53.389Z,1510685093.389 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2017-11-14T18:44:53.389Z,1510685093.389 [SyncHandler](INFO): Protected caller Thread ID is 799
2017-11-14T18:44:53.390Z,1510685093.390 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2017-11-14T18:44:53.401Z,1510685093.401 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2017-11-14T18:44:53.401Z,1510685093.401 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 800
2017-11-14T18:44:53.404Z,1510685093.404 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2017-11-14T18:44:53.426Z,1510685093.426 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2017-11-14T18:44:53.437Z,1510685093.437 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2017-11-14T18:44:53.437Z,1510685093.437 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 801
2017-11-14T18:44:53.438Z,1510685093.438 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2017-11-14T18:44:53.449Z,1510685093.449 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2017-11-14T18:44:53.449Z,1510685093.449 [logger ThreadHandler](INFO): Protected caller Thread ID is 802
2017-11-14T18:44:53.451Z,1510685093.451 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2017-11-14T18:44:53.451Z,1510685093.451 [Supervisor](INFO): Looking for Config files in directory: Config/
2017-11-14T18:44:53.457Z,1510685093.457 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2017-11-14T18:44:54.066Z,1510685094.066 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2017-11-14T18:44:54.068Z,1510685094.068 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2017-11-14T18:44:54.219Z,1510685094.219 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2017-11-14T18:44:54.219Z,1510685094.219 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2017-11-14T18:44:55.044Z,1510685095.044 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2017-11-14T18:44:55.046Z,1510685095.046 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2017-11-14T18:44:55.225Z,1510685095.225 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2017-11-14T18:44:55.226Z,1510685095.226 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2017-11-14T18:44:55.574Z,1510685095.574 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2017-11-14T18:44:55.575Z,1510685095.575 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2017-11-14T18:44:56.296Z,1510685096.296 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2017-11-14T18:44:56.297Z,1510685096.297 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2017-11-14T18:44:56.635Z,1510685096.635 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2017-11-14T18:44:56.636Z,1510685096.636 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2017-11-14T18:44:56.775Z,1510685096.775 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2017-11-14T18:44:57.007Z,1510685097.007 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2017-11-14T18:44:57.007Z,1510685097.007 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2017-11-14T18:44:57.426Z,1510685097.426 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2017-11-14T18:44:57.427Z,1510685097.427 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2017-11-14T18:44:57.840Z,1510685097.840 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2017-11-14T18:44:57.841Z,1510685097.841 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2017-11-14T18:44:58.030Z,1510685098.030 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2017-11-14T18:44:58.031Z,1510685098.030 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2017-11-14T18:44:58.309Z,1510685098.309 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2017-11-14T18:44:58.309Z,1510685098.309 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2017-11-14T18:44:58.411Z,1510685098.411 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2017-11-14T18:44:58.412Z,1510685098.412 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2017-11-14T18:44:58.546Z,1510685098.546 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2017-11-14T18:44:58.549Z,1510685098.549 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-opah/
2017-11-14T18:44:58.553Z,1510685098.553 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Control.cfg
2017-11-14T18:44:58.649Z,1510685098.649 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/secure.cfg
2017-11-14T18:44:58.731Z,1510685098.731 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Simulator.cfg
2017-11-14T18:44:58.815Z,1510685098.815 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/BIT.cfg
2017-11-14T18:44:58.920Z,1510685098.920 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Battery.cfg
2017-11-14T18:44:59.137Z,1510685099.137 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2017-11-14T18:44:59.138Z,1510685099.138 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Science.cfg
2017-11-14T18:44:59.275Z,1510685099.275 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/logger.cfg
2017-11-14T18:44:59.368Z,1510685099.368 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Sensor.cfg
2017-11-14T18:44:59.519Z,1510685099.519 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/vehicle.cfg
2017-11-14T18:44:59.672Z,1510685099.672 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Navigation.cfg
2017-11-14T18:44:59.771Z,1510685099.771 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Servo.cfg
2017-11-14T18:44:59.873Z,1510685099.873 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2017-11-14T18:44:59.888Z,1510685099.888 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2017-11-14T18:45:00.042Z,1510685100.042 [SBIT](DEBUG): Construct Startup Built In Test.
2017-11-14T18:45:00.072Z,1510685100.072 [SBIT] Loaded
2017-11-14T18:45:00.072Z,1510685100.072 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2017-11-14T18:45:00.073Z,1510685100.073 [IBIT](DEBUG): Construct Initiated Built In Test.
2017-11-14T18:45:00.099Z,1510685100.099 [IBIT] Loaded
2017-11-14T18:45:00.100Z,1510685100.100 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2017-11-14T18:45:00.103Z,1510685100.103 [CBIT](DEBUG): Construct Continuous Built In Test.
2017-11-14T18:45:00.249Z,1510685100.249 [CBIT] Loaded
2017-11-14T18:45:00.249Z,1510685100.249 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2017-11-14T18:45:00.249Z,1510685100.249 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2017-11-14T18:45:00.250Z,1510685100.250 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2017-11-14T18:45:00.523Z,1510685100.523 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2017-11-14T18:45:00.525Z,1510685100.525 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2017-11-14T18:45:01.055Z,1510685101.055 [DataOverHttps] Loaded
2017-11-14T18:45:01.055Z,1510685101.055 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2017-11-14T18:45:01.080Z,1510685101.080 [Depth_Keller] Loaded
2017-11-14T18:45:01.080Z,1510685101.080 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2017-11-14T18:45:01.085Z,1510685101.085 [DropWeight] Loaded
2017-11-14T18:45:01.085Z,1510685101.085 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2017-11-14T18:45:01.172Z,1510685101.172 [NAL9602] Loaded
2017-11-14T18:45:01.173Z,1510685101.173 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2017-11-14T18:45:01.181Z,1510685101.181 [Onboard] Loaded
2017-11-14T18:45:01.181Z,1510685101.181 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2017-11-14T18:45:01.188Z,1510685101.188 [Radio_Surface] Loaded
2017-11-14T18:45:01.188Z,1510685101.188 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2017-11-14T18:45:01.189Z,1510685101.189 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 407BC4E0
2017-11-14T18:45:01.190Z,1510685101.190 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 882
2017-11-14T18:45:01.196Z,1510685101.196 [SCPI] Loaded
2017-11-14T18:45:01.196Z,1510685101.196 [ComponentRegistry](DEBUG): SyncComponent "SCPI" handled in the control thread.
2017-11-14T18:45:01.347Z,1510685101.347 [PNI_TCM] Loaded
2017-11-14T18:45:01.347Z,1510685101.347 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2017-11-14T18:45:01.408Z,1510685101.408 [Rowe_600LCM] Loaded
2017-11-14T18:45:01.408Z,1510685101.408 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2017-11-14T18:45:01.409Z,1510685101.409 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 407EC4E0
2017-11-14T18:45:01.409Z,1510685101.409 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 883
2017-11-14T18:45:03.148Z,1510685103.148 [BPC1] Loaded
2017-11-14T18:45:03.149Z,1510685103.149 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2017-11-14T18:45:03.149Z,1510685103.149 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2017-11-14T18:45:03.150Z,1510685103.150 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2017-11-14T18:45:03.689Z,1510685103.689 [Aanderaa_O2] Loaded
2017-11-14T18:45:03.689Z,1510685103.689 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2017-11-14T18:45:03.731Z,1510685103.731 [CTD_Seabird] Loaded
2017-11-14T18:45:03.731Z,1510685103.731 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2017-11-14T18:45:03.732Z,1510685103.732 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 408754E0
2017-11-14T18:45:03.732Z,1510685103.732 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 885
2017-11-14T18:45:03.748Z,1510685103.748 [ESPComponent] Loaded
2017-11-14T18:45:03.748Z,1510685103.748 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2017-11-14T18:45:03.762Z,1510685103.762 [PAR_Licor] Loaded
2017-11-14T18:45:03.762Z,1510685103.762 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2017-11-14T18:45:03.873Z,1510685103.873 [WetLabsBB2FL] Loaded
2017-11-14T18:45:03.873Z,1510685103.873 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2017-11-14T18:45:03.897Z,1510685103.897 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 408A54E0
2017-11-14T18:45:03.897Z,1510685103.897 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 886
2017-11-14T18:45:03.898Z,1510685103.898 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2017-11-14T18:45:03.898Z,1510685103.898 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2017-11-14T18:45:04.003Z,1510685104.003 [VerticalControl](DEBUG): Construct VerticalControl.
2017-11-14T18:45:04.100Z,1510685104.100 [VerticalControl] Loaded
2017-11-14T18:45:04.100Z,1510685104.100 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2017-11-14T18:45:04.101Z,1510685104.101 [HorizontalControl](DEBUG): Construct HorizontalControl.
2017-11-14T18:45:04.161Z,1510685104.161 [HorizontalControl] Loaded
2017-11-14T18:45:04.161Z,1510685104.161 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2017-11-14T18:45:04.162Z,1510685104.162 [SpeedControl](DEBUG): Construct SpeedControl.
2017-11-14T18:45:04.168Z,1510685104.168 [SpeedControl] Loaded
2017-11-14T18:45:04.168Z,1510685104.168 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2017-11-14T18:45:04.169Z,1510685104.169 [LoopControl](DEBUG): Construct LoopControl.
2017-11-14T18:45:04.169Z,1510685104.169 [LoopControl] Loaded
2017-11-14T18:45:04.169Z,1510685104.169 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2017-11-14T18:45:04.170Z,1510685104.170 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2017-11-14T18:45:04.170Z,1510685104.170 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2017-11-14T18:45:04.194Z,1510685104.194 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2017-11-14T18:45:04.195Z,1510685104.195 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2017-11-14T18:45:04.311Z,1510685104.311 [BuoyancyServo] Loaded
2017-11-14T18:45:04.312Z,1510685104.312 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2017-11-14T18:45:04.323Z,1510685104.323 [ElevatorServo] Loaded
2017-11-14T18:45:04.323Z,1510685104.323 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2017-11-14T18:45:04.334Z,1510685104.334 [MassServo] Loaded
2017-11-14T18:45:04.334Z,1510685104.334 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2017-11-14T18:45:04.345Z,1510685104.345 [RudderServo] Loaded
2017-11-14T18:45:04.345Z,1510685104.345 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2017-11-14T18:45:04.356Z,1510685104.356 [ThrusterServo] Loaded
2017-11-14T18:45:04.356Z,1510685104.356 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2017-11-14T18:45:04.357Z,1510685104.357 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2017-11-14T18:45:04.357Z,1510685104.357 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2017-11-14T18:45:04.394Z,1510685104.394 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2017-11-14T18:45:04.395Z,1510685104.395 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2017-11-14T18:45:04.430Z,1510685104.430 [DepthRateCalculator] Loaded
2017-11-14T18:45:04.431Z,1510685104.431 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2017-11-14T18:45:04.436Z,1510685104.436 [PitchRateCalculator] Loaded
2017-11-14T18:45:04.436Z,1510685104.436 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2017-11-14T18:45:04.451Z,1510685104.451 [SpeedCalculator] Loaded
2017-11-14T18:45:04.451Z,1510685104.451 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2017-11-14T18:45:04.472Z,1510685104.472 [TempGradientCalculator] Loaded
2017-11-14T18:45:04.472Z,1510685104.472 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2017-11-14T18:45:04.488Z,1510685104.488 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2017-11-14T18:45:04.488Z,1510685104.488 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2017-11-14T18:45:04.493Z,1510685104.493 [YawRateCalculator] Loaded
2017-11-14T18:45:04.493Z,1510685104.493 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2017-11-14T18:45:04.494Z,1510685104.494 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2017-11-14T18:45:04.494Z,1510685104.494 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2017-11-14T18:45:04.617Z,1510685104.617 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2017-11-14T18:45:04.618Z,1510685104.618 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2017-11-14T18:45:04.728Z,1510685104.728 [DeadReckonUsingMultipleVelocitySources] Loaded
2017-11-14T18:45:04.729Z,1510685104.729 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2017-11-14T18:45:04.782Z,1510685104.782 [DeadReckonUsingSpeedCalculator] Loaded
2017-11-14T18:45:04.783Z,1510685104.783 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2017-11-14T18:45:04.836Z,1510685104.836 [DeadReckonWithRespectToSeafloor] Loaded
2017-11-14T18:45:04.836Z,1510685104.836 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2017-11-14T18:45:04.852Z,1510685104.852 [NavChart] Loaded
2017-11-14T18:45:04.852Z,1510685104.852 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2017-11-14T18:45:04.856Z,1510685104.856 [UniversalFixResidualReporter] Loaded
2017-11-14T18:45:04.857Z,1510685104.857 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2017-11-14T18:45:04.857Z,1510685104.857 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2017-11-14T18:45:04.858Z,1510685104.858 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2017-11-14T18:45:04.975Z,1510685104.975 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2017-11-14T18:45:04.975Z,1510685104.975 [StratificationFrontDetector](DEBUG): (re)initializing
2017-11-14T18:45:04.976Z,1510685104.976 [StratificationFrontDetector] Loaded
2017-11-14T18:45:04.976Z,1510685104.976 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2017-11-14T18:45:04.976Z,1510685104.976 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2017-11-14T18:45:04.980Z,1510685104.980 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2017-11-14T18:45:04.981Z,1510685104.981 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2017-11-14T18:45:04.987Z,1510685104.987 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2017-11-14T18:45:04.988Z,1510685104.988 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A164E0
2017-11-14T18:45:04.989Z,1510685104.989 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 887
2017-11-14T18:45:04.994Z,1510685104.994 [Supervisor](INFO): Main Thread ID is 795
2017-11-14T18:45:04.994Z,1510685104.994 [Supervisor](DEBUG): Running supervisor.
2017-11-14T18:45:04.994Z,1510685104.994 [CommandLine ThreadHandler](INFO): Handler Thread ID is 888
2017-11-14T18:45:04.997Z,1510685104.997 [controlThread ThreadHandler](INFO): Handler Thread ID is 889
2017-11-14T18:45:04.998Z,1510685104.998 [controlThread](DEBUG): Initializing ControlThread
2017-11-14T18:45:04.998Z,1510685104.998 [SBIT](INFO): Initialize SBIT Component.
2017-11-14T18:45:04.999Z,1510685104.999 [SBIT](IMPORTANT): git: 2017-10-26-27-g28caa4f
2017-11-14T18:45:04.999Z,1510685104.999 [SBIT](INFO): git hash: 28caa4f52d4014465ae2cbbbbc56c9b8302a605b
2017-11-14T18:45:04.999Z,1510685104.999 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2017-11-14T18:45:05.001Z,1510685105.001 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #17 PREEMPT Fri Oct 6 17:22:04 PDT 2017
2017-11-14T18:45:05.002Z,1510685105.002 [SBIT](INFO): Beginning SBIT in 39.000000 seconds.
2017-11-14T18:45:05.002Z,1510685105.002 [IBIT](INFO): Initialize IBIT Component.
2017-11-14T18:45:05.003Z,1510685105.003 [CBIT](DEBUG): Initialize CBIT Component.
2017-11-14T18:45:05.003Z,1510685105.003 [CBIT](CRITICAL): LAST REBOOT DUE TO WATCHDOG TIMER RESET.
2017-11-14T18:45:05.004Z,1510685105.004 [logger ThreadHandler](INFO): Handler Thread ID is 890
2017-11-14T18:45:05.029Z,1510685105.029 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 891
2017-11-14T18:45:05.035Z,1510685105.035 [Radio_Surface](INFO): Powering up
2017-11-14T18:45:05.053Z,1510685105.053 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 892
2017-11-14T18:45:05.054Z,1510685105.054 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:45:05.054Z,1510685105.054 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:45:05.165Z,1510685105.165 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 893
2017-11-14T18:45:05.166Z,1510685105.166 [CTD_Seabird](INFO): Initializing
2017-11-14T18:45:05.190Z,1510685105.190 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2017-11-14T18:45:05.192Z,1510685105.192 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2017-11-14T18:45:05.194Z,1510685105.194 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 895
2017-11-14T18:45:05.195Z,1510685105.195 [WetLabsBB2FL](INFO): Powering down
2017-11-14T18:45:05.215Z,1510685105.215 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2017-11-14T18:45:05.216Z,1510685105.216 [LoopControl](DEBUG): Initialize LoopControlComponent.
2017-11-14T18:45:05.228Z,1510685105.228 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-11-14T18:45:05.229Z,1510685105.229 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2017-11-14T18:45:05.229Z,1510685105.229 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2017-11-14T18:45:05.230Z,1510685105.230 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2017-11-14T18:45:05.230Z,1510685105.230 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2017-11-14T18:45:05.231Z,1510685105.231 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2017-11-14T18:45:05.232Z,1510685105.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-14T18:45:05.250Z,1510685105.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:45:05.251Z,1510685105.251 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:45:05.253Z,1510685105.253 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-14T18:45:05.353Z,1510685105.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:45:05.353Z,1510685105.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:45:05.354Z,1510685105.354 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T18:45:05.354Z,1510685105.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:45:05.355Z,1510685105.355 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:45:05.355Z,1510685105.355 [NavChart](DEBUG): Initialize NavChart Navigation.
2017-11-14T18:45:05.355Z,1510685105.355 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2017-11-14T18:45:05.357Z,1510685105.357 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2017-11-14T18:45:05.385Z,1510685105.385 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 897
2017-11-14T18:45:05.393Z,1510685105.393 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2017-11-14T18:45:05.393Z,1510685105.393 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2017-11-14T18:45:05.393Z,1510685105.393 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2017-11-14T18:45:05.393Z,1510685105.393 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2017-11-14T18:45:05.394Z,1510685105.394 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2017-11-14T18:45:05.394Z,1510685105.394 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2017-11-14T18:45:05.394Z,1510685105.394 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2017-11-14T18:45:05.394Z,1510685105.394 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2017-11-14T18:45:05.394Z,1510685105.394 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2017-11-14T18:45:05.394Z,1510685105.394 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2017-11-14T18:45:05.395Z,1510685105.395 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2017-11-14T18:45:05.395Z,1510685105.395 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2017-11-14T18:45:05.395Z,1510685105.395 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2017-11-14T18:45:05.395Z,1510685105.395 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2017-11-14T18:45:05.395Z,1510685105.395 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2017-11-14T18:45:05.395Z,1510685105.395 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2017-11-14T18:45:05.422Z,1510685105.422 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2017-11-14T18:45:05.455Z,1510685105.455 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-11-14T18:45:05.456Z,1510685105.456 [CTD_Seabird](INFO): Powering down
2017-11-14T18:45:05.534Z,1510685105.534 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2017-11-14T18:45:05.535Z,1510685105.535 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2017-11-14T18:45:05.644Z,1510685105.644 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2017-11-14T18:45:05.651Z,1510685105.651 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:45:05.651Z,1510685105.651 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-14T18:45:05.651Z,1510685105.651 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:45:05.670Z,1510685105.670 [Default:A.Wait](DEBUG): Construct Wait.
2017-11-14T18:45:05.672Z,1510685105.672 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2017-11-14T18:45:05.681Z,1510685105.681 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2017-11-14T18:45:05.684Z,1510685105.684 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2017-11-14T18:45:05.729Z,1510685105.729 [Default:E.Execute](DEBUG): Construct Execute.
2017-11-14T18:45:05.733Z,1510685105.733 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2017-11-14T18:45:05.744Z,1510685105.744 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,SCPI,PNI_TCM,BPC1,Aanderaa_O2,ESPComponent,PAR_Licor,Depth_Keller,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2017-11-14T18:45:05.769Z,1510685105.769 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2017-11-14T18:45:06.073Z,1510685106.073 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:45:06.301Z,1510685106.301 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:45:06.358Z,1510685106.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:06.358Z,1510685106.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T18:45:06.442Z,1510685106.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:06.447Z,1510685106.447 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:06.473Z,1510685106.473 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:06.573Z,1510685106.573 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-11-14T18:45:06.582Z,1510685106.582 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-11-14T18:45:06.600Z,1510685106.600 [ElevatorServo](DEBUG): Initializing EZServoServo.
2017-11-14T18:45:06.605Z,1510685106.605 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2017-11-14T18:45:06.615Z,1510685106.615 [MassServo](DEBUG): Initializing EZServoServo.
2017-11-14T18:45:06.621Z,1510685106.621 [MassServo](DEBUG): Initializing MassServo.
2017-11-14T18:45:06.643Z,1510685106.643 [RudderServo](DEBUG): Initializing EZServoServo.
2017-11-14T18:45:06.649Z,1510685106.649 [RudderServo](DEBUG): Initializing RudderServo.
2017-11-14T18:45:06.670Z,1510685106.670 [ThrusterServo](DEBUG): Initializing EZServoServo.
2017-11-14T18:45:06.677Z,1510685106.677 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2017-11-14T18:45:06.730Z,1510685106.730 [CommandLine](FAULT): Scheduling is paused
2017-11-14T18:45:06.731Z,1510685106.731 [CBIT](INFO): Critical error at 20171114T184505
2017-11-14T18:45:06.731Z,1510685106.731 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2017-11-14T18:45:06.734Z,1510685106.734 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:45:06.918Z,1510685106.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:06.919Z,1510685106.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T18:45:06.920Z,1510685106.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:06.920Z,1510685106.920 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:06.929Z,1510685106.929 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:07.248Z,1510685107.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:07.248Z,1510685107.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T18:45:07.249Z,1510685107.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:07.257Z,1510685107.257 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:07.258Z,1510685107.258 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:07.672Z,1510685107.672 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:45:07.672Z,1510685107.672 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-14T18:45:07.731Z,1510685107.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:07.731Z,1510685107.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T18:45:07.733Z,1510685107.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:07.733Z,1510685107.733 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:07.734Z,1510685107.734 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:07.933Z,1510685107.933 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:45:07.933Z,1510685107.933 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:45:07.933Z,1510685107.933 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:45:07.933Z,1510685107.933 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-14T18:45:07.934Z,1510685107.934 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:45:08.146Z,1510685108.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:08.146Z,1510685108.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T18:45:08.147Z,1510685108.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:08.148Z,1510685108.148 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:08.149Z,1510685108.149 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:08.175Z,1510685108.175 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:45:08.337Z,1510685108.337 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:45:08.553Z,1510685108.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:08.553Z,1510685108.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T18:45:08.554Z,1510685108.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:08.555Z,1510685108.555 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:08.556Z,1510685108.556 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:08.580Z,1510685108.580 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:45:08.957Z,1510685108.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:08.957Z,1510685108.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T18:45:08.958Z,1510685108.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:08.959Z,1510685108.959 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:08.960Z,1510685108.960 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:09.437Z,1510685109.437 [Aanderaa_O2](INFO): Powering down
2017-11-14T18:45:09.548Z,1510685109.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:09.548Z,1510685109.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T18:45:09.549Z,1510685109.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:09.550Z,1510685109.550 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:09.551Z,1510685109.551 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T18:45:09.765Z,1510685109.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T18:45:09.766Z,1510685109.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:09.945Z,1510685109.945 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:45:09.945Z,1510685109.945 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-14T18:45:10.119Z,1510685110.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T18:45:10.120Z,1510685110.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:10.197Z,1510685110.197 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:45:10.197Z,1510685110.197 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:45:10.198Z,1510685110.198 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:45:10.198Z,1510685110.198 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-14T18:45:10.198Z,1510685110.198 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:45:10.413Z,1510685110.413 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:45:10.589Z,1510685110.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T18:45:10.590Z,1510685110.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:10.601Z,1510685110.601 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:45:10.949Z,1510685110.949 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:45:10.967Z,1510685110.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:11.336Z,1510685111.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:11.802Z,1510685111.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:12.153Z,1510685112.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:12.241Z,1510685112.241 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:45:12.241Z,1510685112.241 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-14T18:45:12.565Z,1510685112.565 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:45:12.565Z,1510685112.565 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:45:12.565Z,1510685112.565 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:45:12.565Z,1510685112.565 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-14T18:45:12.566Z,1510685112.566 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:45:12.569Z,1510685112.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:12.653Z,1510685112.653 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:45:12.921Z,1510685112.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:12.969Z,1510685112.969 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:45:13.183Z,1510685113.183 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:45:13.364Z,1510685113.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:13.733Z,1510685113.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:14.168Z,1510685114.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:14.572Z,1510685114.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:14.637Z,1510685114.637 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:45:14.637Z,1510685114.637 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-14T18:45:14.797Z,1510685114.797 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:45:14.798Z,1510685114.798 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:45:14.798Z,1510685114.798 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:45:14.798Z,1510685114.798 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-14T18:45:14.798Z,1510685114.798 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:45:14.980Z,1510685114.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:15.049Z,1510685115.049 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:45:15.050Z,1510685115.050 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:45:15.201Z,1510685115.201 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:45:15.356Z,1510685115.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:15.403Z,1510685115.403 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:45:15.791Z,1510685115.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:16.182Z,1510685116.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:16.584Z,1510685116.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:16.939Z,1510685116.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:17.378Z,1510685117.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:17.751Z,1510685117.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:18.170Z,1510685118.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:18.532Z,1510685118.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:18.937Z,1510685118.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:19.329Z,1510685119.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:19.831Z,1510685119.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:20.183Z,1510685120.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:20.575Z,1510685120.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:20.958Z,1510685120.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:21.333Z,1510685121.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:21.761Z,1510685121.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:22.131Z,1510685122.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:22.564Z,1510685122.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:23.019Z,1510685123.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:23.401Z,1510685123.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:23.758Z,1510685123.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:24.130Z,1510685124.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:24.532Z,1510685124.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:24.984Z,1510685124.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:25.332Z,1510685125.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:25.720Z,1510685125.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:26.163Z,1510685126.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:26.591Z,1510685126.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:26.982Z,1510685126.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:27.370Z,1510685127.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:27.763Z,1510685127.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:28.174Z,1510685128.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:28.569Z,1510685128.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:28.936Z,1510685128.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:29.366Z,1510685129.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:29.767Z,1510685129.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:30.138Z,1510685130.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:30.556Z,1510685130.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:30.935Z,1510685130.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:31.287Z,1510685131.287 [NAL9602](INFO): Powering up NAL9602
2017-11-14T18:45:31.337Z,1510685131.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:31.768Z,1510685131.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:32.148Z,1510685132.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:32.544Z,1510685132.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:32.948Z,1510685132.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:33.346Z,1510685133.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:33.739Z,1510685133.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:34.120Z,1510685134.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:34.541Z,1510685134.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:34.940Z,1510685134.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:35.320Z,1510685135.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:35.762Z,1510685135.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:36.124Z,1510685136.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:36.582Z,1510685136.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:36.978Z,1510685136.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:37.328Z,1510685137.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:37.736Z,1510685137.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:38.170Z,1510685138.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:38.536Z,1510685138.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:38.928Z,1510685138.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:39.324Z,1510685139.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:39.722Z,1510685139.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:40.152Z,1510685140.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:40.546Z,1510685140.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:40.935Z,1510685140.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:41.375Z,1510685141.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:41.741Z,1510685141.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:42.082Z,1510685142.082 [NAL9602](INFO): NAL9602 initialized
2017-11-14T18:45:42.139Z,1510685142.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:42.623Z,1510685142.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:42.944Z,1510685142.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:43.354Z,1510685143.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:43.814Z,1510685143.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:44.145Z,1510685144.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:44.567Z,1510685144.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:44.576Z,1510685144.576 [SBIT](IMPORTANT): Beginning Startup BIT
2017-11-14T18:45:44.609Z,1510685144.609 [CBIT](IMPORTANT): Beginning ground fault scan
2017-11-14T18:45:44.972Z,1510685144.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:45.355Z,1510685145.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:45.732Z,1510685145.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:46.167Z,1510685146.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:46.536Z,1510685146.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:47.085Z,1510685147.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:47.475Z,1510685147.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:47.872Z,1510685147.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:48.276Z,1510685148.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:48.788Z,1510685148.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:49.124Z,1510685149.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:49.492Z,1510685149.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:49.893Z,1510685149.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:50.335Z,1510685150.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:50.688Z,1510685150.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:51.131Z,1510685151.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:51.510Z,1510685151.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:51.886Z,1510685151.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:52.280Z,1510685152.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:52.698Z,1510685152.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:53.076Z,1510685153.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:53.472Z,1510685153.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:53.868Z,1510685153.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:54.288Z,1510685154.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:54.693Z,1510685154.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:55.116Z,1510685155.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:55.473Z,1510685155.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:55.890Z,1510685155.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:55.966Z,1510685155.966 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.024185
CHAN A1 (24V): -0.004772
CHAN A2 (12V): 0.002092
CHAN A3 (5V): -0.023346
CHAN B0 (3.3V): -0.001020
CHAN B1 (3.15aV): -0.001297
CHAN B2 (3.15bV): -0.000864
CHAN B3 (GND): -0.002359
OPEN: 0.003154
Full Scale Calc: 4.765 mA, -1.589 mA
2017-11-14T18:45:56.322Z,1510685156.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:56.676Z,1510685156.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:57.086Z,1510685157.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:57.484Z,1510685157.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:57.882Z,1510685157.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:58.284Z,1510685158.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:58.675Z,1510685158.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:59.080Z,1510685159.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:59.515Z,1510685159.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:45:59.873Z,1510685159.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:00.452Z,1510685160.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:00.848Z,1510685160.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:01.243Z,1510685161.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:01.644Z,1510685161.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:02.044Z,1510685162.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:02.448Z,1510685162.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:02.848Z,1510685162.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:03.244Z,1510685163.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:03.644Z,1510685163.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:04.044Z,1510685164.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:04.444Z,1510685164.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:04.848Z,1510685164.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:05.244Z,1510685165.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:05.652Z,1510685165.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:06.052Z,1510685166.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:06.444Z,1510685166.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:06.852Z,1510685166.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:07.247Z,1510685167.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:07.674Z,1510685167.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:08.071Z,1510685168.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:08.451Z,1510685168.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:08.848Z,1510685168.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:09.244Z,1510685169.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:09.648Z,1510685169.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:10.048Z,1510685170.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:10.448Z,1510685170.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:10.848Z,1510685170.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:11.300Z,1510685171.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:11.647Z,1510685171.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:12.078Z,1510685172.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:12.496Z,1510685172.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:12.847Z,1510685172.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:13.275Z,1510685173.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:13.649Z,1510685173.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:14.047Z,1510685174.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:14.445Z,1510685174.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:14.848Z,1510685174.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:15.247Z,1510685175.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:15.651Z,1510685175.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:16.046Z,1510685176.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:16.474Z,1510685176.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:16.857Z,1510685176.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:17.245Z,1510685177.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:17.648Z,1510685177.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:18.051Z,1510685178.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:18.446Z,1510685178.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:18.847Z,1510685178.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:19.252Z,1510685179.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:19.645Z,1510685179.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:20.045Z,1510685180.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:20.447Z,1510685180.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:20.847Z,1510685180.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:21.252Z,1510685181.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:21.684Z,1510685181.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:22.047Z,1510685182.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:22.445Z,1510685182.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:22.852Z,1510685182.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:23.247Z,1510685183.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:23.652Z,1510685183.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:24.055Z,1510685184.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:24.448Z,1510685184.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:24.851Z,1510685184.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:25.259Z,1510685185.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:25.655Z,1510685185.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:26.048Z,1510685186.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:26.451Z,1510685186.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:26.848Z,1510685186.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:27.357Z,1510685187.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:27.748Z,1510685187.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:28.155Z,1510685188.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:28.549Z,1510685188.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:28.948Z,1510685188.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:29.372Z,1510685189.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:29.780Z,1510685189.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:30.182Z,1510685190.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:30.552Z,1510685190.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:30.951Z,1510685190.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:31.356Z,1510685191.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:31.752Z,1510685191.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:32.151Z,1510685192.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:32.548Z,1510685192.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:32.960Z,1510685192.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:33.395Z,1510685193.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:33.773Z,1510685193.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:34.159Z,1510685194.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:34.557Z,1510685194.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:34.996Z,1510685194.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:35.356Z,1510685195.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:35.796Z,1510685195.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:36.150Z,1510685196.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:36.556Z,1510685196.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:36.953Z,1510685196.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:37.347Z,1510685197.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:37.758Z,1510685197.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:38.153Z,1510685198.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:38.602Z,1510685198.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:38.627Z,1510685198.627 [SBIT](IMPORTANT): SBIT PASSED
2017-11-14T18:46:38.963Z,1510685198.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:38.966Z,1510685198.966 [MissionManager](IMPORTANT): Started mission Startup
2017-11-14T18:46:38.966Z,1510685198.966 [Startup] Running Loop=1
2017-11-14T18:46:38.967Z,1510685198.967 [Startup](DEBUG): Aggregate::initialize Startup
2017-11-14T18:46:38.967Z,1510685198.967 [Startup:A.GoToSurface] Running Loop=1
2017-11-14T18:46:38.967Z,1510685198.967 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-11-14T18:46:38.967Z,1510685198.967 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-11-14T18:46:38.968Z,1510685198.968 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-11-14T18:46:38.968Z,1510685198.968 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-11-14T18:46:38.970Z,1510685198.970 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-11-14T18:46:38.970Z,1510685198.970 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-11-14T18:46:38.976Z,1510685198.976 [Startup:StartupSatComms] Running Loop=1
2017-11-14T18:46:38.976Z,1510685198.976 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2017-11-14T18:46:38.976Z,1510685198.976 [Startup:StartupSatComms:A] Running Loop=1
2017-11-14T18:46:39.364Z,1510685199.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:39.367Z,1510685199.367 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2017-11-14T18:46:39.765Z,1510685199.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:40.164Z,1510685200.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:40.561Z,1510685200.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:40.960Z,1510685200.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:41.359Z,1510685201.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:41.764Z,1510685201.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:42.162Z,1510685202.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:42.565Z,1510685202.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:42.962Z,1510685202.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:43.355Z,1510685203.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:43.772Z,1510685203.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:44.176Z,1510685204.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:44.548Z,1510685204.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:44.951Z,1510685204.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:45.347Z,1510685205.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:45.750Z,1510685205.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:46.152Z,1510685206.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:46.550Z,1510685206.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:46.945Z,1510685206.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:47.353Z,1510685207.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:47.749Z,1510685207.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:48.148Z,1510685208.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:48.580Z,1510685208.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:48.981Z,1510685208.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:49.378Z,1510685209.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:49.755Z,1510685209.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:50.145Z,1510685210.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:50.548Z,1510685210.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:50.955Z,1510685210.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:51.349Z,1510685211.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:51.747Z,1510685211.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:52.156Z,1510685212.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:52.560Z,1510685212.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:52.954Z,1510685212.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:53.361Z,1510685213.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:53.754Z,1510685213.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:54.145Z,1510685214.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:54.552Z,1510685214.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:54.951Z,1510685214.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:55.353Z,1510685215.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:55.797Z,1510685215.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:56.152Z,1510685216.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:56.580Z,1510685216.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:56.960Z,1510685216.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:57.357Z,1510685217.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:57.775Z,1510685217.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:58.161Z,1510685218.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:58.572Z,1510685218.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:58.959Z,1510685218.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:59.364Z,1510685219.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:46:59.764Z,1510685219.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:00.156Z,1510685220.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:00.567Z,1510685220.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:00.940Z,1510685220.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:01.376Z,1510685221.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:01.773Z,1510685221.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:02.148Z,1510685222.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:02.548Z,1510685222.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:02.946Z,1510685222.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:03.350Z,1510685223.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:03.747Z,1510685223.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:04.146Z,1510685224.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:04.543Z,1510685224.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:04.950Z,1510685224.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:05.346Z,1510685225.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:05.747Z,1510685225.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:06.147Z,1510685226.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:06.551Z,1510685226.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:06.984Z,1510685226.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:07.347Z,1510685227.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:07.804Z,1510685227.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:08.172Z,1510685228.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:08.547Z,1510685228.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:08.951Z,1510685228.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:09.343Z,1510685229.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:09.750Z,1510685229.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:10.153Z,1510685230.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:10.558Z,1510685230.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:10.949Z,1510685230.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:11.349Z,1510685231.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:11.751Z,1510685231.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:12.154Z,1510685232.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:12.547Z,1510685232.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:12.951Z,1510685232.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:13.350Z,1510685233.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:13.750Z,1510685233.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:14.162Z,1510685234.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:14.559Z,1510685234.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:14.962Z,1510685234.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:15.351Z,1510685235.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:15.753Z,1510685235.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:16.154Z,1510685236.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:16.554Z,1510685236.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:16.952Z,1510685236.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:17.346Z,1510685237.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:17.754Z,1510685237.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:18.155Z,1510685238.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:18.553Z,1510685238.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:18.996Z,1510685238.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:19.407Z,1510685239.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:19.752Z,1510685239.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:20.193Z,1510685240.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:20.547Z,1510685240.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:20.973Z,1510685240.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:21.363Z,1510685241.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:21.756Z,1510685241.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:22.158Z,1510685242.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:22.552Z,1510685242.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:23.005Z,1510685243.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:23.370Z,1510685243.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:23.752Z,1510685243.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:24.150Z,1510685244.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:24.555Z,1510685244.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:24.947Z,1510685244.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:25.346Z,1510685245.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:25.757Z,1510685245.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:26.156Z,1510685246.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:26.547Z,1510685246.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:26.957Z,1510685246.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:27.362Z,1510685247.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:27.779Z,1510685247.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:28.151Z,1510685248.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:28.568Z,1510685248.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:31.697Z,1510685251.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:31.810Z,1510685251.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:32.163Z,1510685252.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:32.521Z,1510685252.521 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003717
2017-11-14T18:47:32.593Z,1510685252.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:32.973Z,1510685252.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:33.369Z,1510685253.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:33.778Z,1510685253.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:34.179Z,1510685254.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:34.576Z,1510685254.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:34.969Z,1510685254.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:35.375Z,1510685255.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:35.756Z,1510685255.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:36.159Z,1510685256.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:36.563Z,1510685256.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:37.007Z,1510685257.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:37.388Z,1510685257.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:37.759Z,1510685257.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:38.161Z,1510685258.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:38.559Z,1510685258.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:38.989Z,1510685258.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:38.997Z,1510685258.997 [Startup:StartupSatComms:A](INFO): Timed out from 2017-11-14T18:46:38.0Z
2017-11-14T18:47:38.997Z,1510685258.997 [Startup:StartupSatComms:A] Stopped
2017-11-14T18:47:38.997Z,1510685258.997 [Startup:StartupSatComms:B] Running Loop=1
2017-11-14T18:47:39.360Z,1510685259.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:39.365Z,1510685259.365 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-11-14T18:47:39.866Z,1510685259.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:40.165Z,1510685260.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:43.265Z,1510685263.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:43.322Z,1510685263.322 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171114T182548/Courier0008.lzma
2017-11-14T18:47:43.418Z,1510685263.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:43.774Z,1510685263.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:44.109Z,1510685264.109 [DataOverHttps](INFO): Moved sent file to Logs/20171114T182548/Courier0008.lzma.bak
2017-11-14T18:47:44.110Z,1510685264.110 [DataOverHttps](INFO): SBD MOMSN=5236234
2017-11-14T18:47:44.174Z,1510685264.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:44.916Z,1510685264.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:45.047Z,1510685265.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:48.109Z,1510685268.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:48.215Z,1510685268.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:48.599Z,1510685268.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:48.973Z,1510685268.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:49.371Z,1510685269.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:49.773Z,1510685269.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:52.854Z,1510685272.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:52.875Z,1510685272.875 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171114T183827/Courier0000.lzma
2017-11-14T18:47:52.971Z,1510685272.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:53.348Z,1510685273.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:53.673Z,1510685273.673 [DataOverHttps](INFO): Moved sent file to Logs/20171114T183827/Courier0000.lzma.bak
2017-11-14T18:47:53.673Z,1510685273.673 [DataOverHttps](INFO): SBD MOMSN=5236236
2017-11-14T18:47:53.744Z,1510685273.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:54.126Z,1510685274.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:54.519Z,1510685274.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:57.629Z,1510685277.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:57.760Z,1510685277.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:58.128Z,1510685278.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:58.527Z,1510685278.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:58.921Z,1510685278.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:47:59.324Z,1510685279.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:02.360Z,1510685282.360 [NAL9602](INFO): SBD MO Status=2, MOMSN=2777, MT Status=2, MTMSN=0
2017-11-14T18:48:02.360Z,1510685282.360 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-11-14T18:48:02.411Z,1510685282.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:02.432Z,1510685282.432 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20171114T184453/Courier0000.lzma
2017-11-14T18:48:02.559Z,1510685282.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:02.878Z,1510685282.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:03.233Z,1510685283.233 [DataOverHttps](INFO): Moved sent file to Logs/20171114T184453/Courier0000.lzma.bak
2017-11-14T18:48:03.233Z,1510685283.233 [DataOverHttps](INFO): SBD MOMSN=5236239
2017-11-14T18:48:03.287Z,1510685283.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:03.778Z,1510685283.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:04.106Z,1510685284.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:07.186Z,1510685287.186 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:07.186Z,1510685287.186 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-11-14T18:48:07.186Z,1510685287.186 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-14T18:48:07.188Z,1510685287.188 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:07.188Z,1510685287.188 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2017-11-14T18:48:07.188Z,1510685287.188 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-14T18:48:07.206Z,1510685287.206 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:07.206Z,1510685287.206 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-11-14T18:48:07.206Z,1510685287.206 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T18:48:07.241Z,1510685287.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-14T18:48:07.241Z,1510685287.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-14T18:48:07.241Z,1510685287.241 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T18:48:07.351Z,1510685287.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-14T18:48:07.351Z,1510685287.351 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-11-14T18:48:07.351Z,1510685287.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-14T18:48:07.351Z,1510685287.351 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2017-11-14T18:48:07.352Z,1510685287.352 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T18:48:07.352Z,1510685287.352 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-11-14T18:48:07.691Z,1510685287.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-14T18:48:07.691Z,1510685287.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:48:07.691Z,1510685287.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:48:07.692Z,1510685287.692 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-14T18:48:07.692Z,1510685287.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:48:07.693Z,1510685287.693 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:48:07.693Z,1510685287.693 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T18:48:07.694Z,1510685287.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:48:07.694Z,1510685287.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:48:08.135Z,1510685288.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-14T18:48:08.136Z,1510685288.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:08.494Z,1510685288.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2017-11-14T18:48:08.495Z,1510685288.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:08.911Z,1510685288.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2017-11-14T18:48:08.912Z,1510685288.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:12.017Z,1510685292.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-14T18:48:12.018Z,1510685292.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:12.059Z,1510685292.059 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171114T182548/Express0009.lzma
2017-11-14T18:48:12.163Z,1510685292.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-11-14T18:48:12.164Z,1510685292.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:12.515Z,1510685292.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-14T18:48:12.516Z,1510685292.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:12.857Z,1510685292.857 [DataOverHttps](INFO): Moved sent file to Logs/20171114T182548/Express0009.lzma.bak
2017-11-14T18:48:12.857Z,1510685292.857 [DataOverHttps](INFO): SBD MOMSN=5236243
2017-11-14T18:48:12.939Z,1510685292.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-11-14T18:48:12.940Z,1510685292.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:13.411Z,1510685293.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-11-14T18:48:13.412Z,1510685293.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:13.746Z,1510685293.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-11-14T18:48:13.747Z,1510685293.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:16.792Z,1510685296.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-14T18:48:16.793Z,1510685296.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:16.944Z,1510685296.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2017-11-14T18:48:16.946Z,1510685296.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:17.290Z,1510685297.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-14T18:48:17.291Z,1510685297.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:17.666Z,1510685297.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-14T18:48:17.667Z,1510685297.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:18.058Z,1510685298.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-14T18:48:18.059Z,1510685298.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:18.459Z,1510685298.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-14T18:48:18.460Z,1510685298.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:21.546Z,1510685301.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-11-14T18:48:21.547Z,1510685301.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:21.568Z,1510685301.568 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171114T183827/Express0001.lzma
2017-11-14T18:48:21.692Z,1510685301.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-14T18:48:21.693Z,1510685301.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:22.063Z,1510685302.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-14T18:48:22.064Z,1510685302.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:22.369Z,1510685302.369 [DataOverHttps](INFO): Moved sent file to Logs/20171114T183827/Express0001.lzma.bak
2017-11-14T18:48:22.370Z,1510685302.370 [DataOverHttps](INFO): SBD MOMSN=5236245
2017-11-14T18:48:22.443Z,1510685302.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-14T18:48:22.444Z,1510685302.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:22.844Z,1510685302.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-14T18:48:22.845Z,1510685302.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:23.217Z,1510685303.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-11-14T18:48:23.218Z,1510685303.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:26.344Z,1510685306.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-11-14T18:48:26.345Z,1510685306.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:26.488Z,1510685306.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-14T18:48:26.489Z,1510685306.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:26.823Z,1510685306.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-11-14T18:48:26.824Z,1510685306.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:27.215Z,1510685307.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:27.616Z,1510685307.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:28.015Z,1510685308.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:31.145Z,1510685311.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:31.168Z,1510685311.168 [DataOverHttps](INFO): Sending 682 bytes from file Logs/20171114T184218/Express0001.lzma
2017-11-14T18:48:31.290Z,1510685311.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:31.611Z,1510685311.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:31.965Z,1510685311.965 [DataOverHttps](INFO): Moved sent file to Logs/20171114T184218/Express0001.lzma.bak
2017-11-14T18:48:31.966Z,1510685311.966 [DataOverHttps](INFO): SBD MOMSN=5236247
2017-11-14T18:48:32.035Z,1510685312.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:32.468Z,1510685312.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:32.810Z,1510685312.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:35.956Z,1510685315.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:36.092Z,1510685316.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:36.447Z,1510685316.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:36.873Z,1510685316.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:37.219Z,1510685317.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:37.657Z,1510685317.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:40.717Z,1510685320.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:40.720Z,1510685320.720 [Startup:StartupSatComms:B](INFO): Timed out from 2017-11-14T18:47:38.0Z
2017-11-14T18:48:40.720Z,1510685320.720 [Startup:StartupSatComms:B] Stopped
2017-11-14T18:48:40.720Z,1510685320.720 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2017-11-14T18:48:40.720Z,1510685320.720 [Startup:StartupSatComms] Stopped
2017-11-14T18:48:40.721Z,1510685320.721 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2017-11-14T18:48:40.722Z,1510685320.722 [Startup](INFO): Completed Startup
2017-11-14T18:48:40.722Z,1510685320.722 [MissionManager](INFO): Startup is completed.
2017-11-14T18:48:40.722Z,1510685320.722 [MissionManager](INFO): Uninitializing Mission Startup
2017-11-14T18:48:40.722Z,1510685320.722 [Startup] Stopped
2017-11-14T18:48:40.722Z,1510685320.722 [Startup](DEBUG): Aggregate::uninitialize Startup
2017-11-14T18:48:40.722Z,1510685320.722 [Startup:A.GoToSurface] Stopped
2017-11-14T18:48:40.722Z,1510685320.722 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-11-14T18:48:40.784Z,1510685320.784 [DataOverHttps](INFO): Sending 662 bytes from file Logs/20171114T184453/Express0001.lzma
2017-11-14T18:48:40.858Z,1510685320.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:40.860Z,1510685320.860 [MissionManager](IMPORTANT): Started mission Default
2017-11-14T18:48:40.861Z,1510685320.861 [Default] Running Loop=1
2017-11-14T18:48:40.861Z,1510685320.861 [Default](DEBUG): Aggregate::initialize Default
2017-11-14T18:48:40.861Z,1510685320.861 [Default:B.GoToSurface] Running Loop=1
2017-11-14T18:48:40.861Z,1510685320.861 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-11-14T18:48:40.861Z,1510685320.861 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-11-14T18:48:40.862Z,1510685320.862 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-11-14T18:48:40.862Z,1510685320.862 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-11-14T18:48:40.862Z,1510685320.862 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-11-14T18:48:40.863Z,1510685320.863 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-11-14T18:48:40.863Z,1510685320.863 [Default:A.Wait] Running Loop=1
2017-11-14T18:48:40.863Z,1510685320.863 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-11-14T18:48:41.227Z,1510685321.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:41.577Z,1510685321.577 [DataOverHttps](INFO): Moved sent file to Logs/20171114T184453/Express0001.lzma.bak
2017-11-14T18:48:41.577Z,1510685321.577 [DataOverHttps](INFO): SBD MOMSN=5236265
2017-11-14T18:48:41.640Z,1510685321.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:42.023Z,1510685322.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:42.431Z,1510685322.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:45.522Z,1510685325.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:45.688Z,1510685325.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:46.015Z,1510685326.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:46.418Z,1510685326.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:46.787Z,1510685326.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:47.186Z,1510685327.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:47.592Z,1510685327.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:47.992Z,1510685327.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:48.391Z,1510685328.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:48.782Z,1510685328.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:49.187Z,1510685329.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:49.587Z,1510685329.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:49.994Z,1510685329.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:50.414Z,1510685330.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:50.798Z,1510685330.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:51.193Z,1510685331.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:51.598Z,1510685331.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:51.996Z,1510685331.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:52.387Z,1510685332.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:52.790Z,1510685332.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:53.194Z,1510685333.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:53.592Z,1510685333.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:53.992Z,1510685333.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:53.996Z,1510685333.996 [Default:A.Wait](INFO): Done Waiting.
2017-11-14T18:48:53.996Z,1510685333.996 [Default:A.Wait] Stopped
2017-11-14T18:48:53.996Z,1510685333.996 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-11-14T18:48:54.391Z,1510685334.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:54.395Z,1510685334.395 [Default:CheckIn] Running Loop=1
2017-11-14T18:48:54.395Z,1510685334.395 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-14T18:48:54.395Z,1510685334.395 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-14T18:48:54.792Z,1510685334.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:54.795Z,1510685334.795 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2017-11-14T18:48:55.189Z,1510685335.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:55.600Z,1510685335.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:56.004Z,1510685336.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:56.447Z,1510685336.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:56.800Z,1510685336.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:57.195Z,1510685337.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:57.643Z,1510685337.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:57.991Z,1510685337.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:58.397Z,1510685338.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:58.792Z,1510685338.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:59.234Z,1510685339.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:48:59.598Z,1510685339.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:00.030Z,1510685340.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:00.391Z,1510685340.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:00.801Z,1510685340.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:01.201Z,1510685341.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:01.604Z,1510685341.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:02.001Z,1510685342.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:02.390Z,1510685342.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:02.791Z,1510685342.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:03.198Z,1510685343.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:03.588Z,1510685343.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:03.987Z,1510685343.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:04.398Z,1510685344.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:04.796Z,1510685344.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:05.187Z,1510685345.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:05.598Z,1510685345.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:06.001Z,1510685346.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:06.404Z,1510685346.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:06.804Z,1510685346.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:07.201Z,1510685347.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:07.586Z,1510685347.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:07.996Z,1510685347.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:08.416Z,1510685348.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:08.787Z,1510685348.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:09.196Z,1510685349.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:09.587Z,1510685349.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:09.987Z,1510685349.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:10.395Z,1510685350.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:10.787Z,1510685350.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:11.200Z,1510685351.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:11.604Z,1510685351.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:11.000Z,1510685352.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:12.398Z,1510685352.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:12.796Z,1510685352.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:13.187Z,1510685353.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:13.587Z,1510685353.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:13.996Z,1510685353.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:14.387Z,1510685354.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:14.787Z,1510685354.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:15.196Z,1510685355.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:15.595Z,1510685355.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:15.987Z,1510685355.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:16.404Z,1510685356.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:16.800Z,1510685356.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:17.200Z,1510685357.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:17.604Z,1510685357.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:17.987Z,1510685357.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:18.387Z,1510685358.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:18.796Z,1510685358.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:19.259Z,1510685359.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:19.592Z,1510685359.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:20.011Z,1510685360.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:20.390Z,1510685360.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:20.812Z,1510685360.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:21.204Z,1510685361.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:21.599Z,1510685361.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:22.000Z,1510685362.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:22.404Z,1510685362.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:22.791Z,1510685362.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:23.192Z,1510685363.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:23.597Z,1510685363.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:23.992Z,1510685363.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:24.390Z,1510685364.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:24.797Z,1510685364.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:25.192Z,1510685365.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:25.592Z,1510685365.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:25.998Z,1510685365.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:26.401Z,1510685366.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:26.804Z,1510685366.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:27.204Z,1510685367.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:27.600Z,1510685367.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:27.996Z,1510685367.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:28.397Z,1510685368.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:28.796Z,1510685368.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:29.216Z,1510685369.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:29.598Z,1510685369.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:29.992Z,1510685369.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:30.401Z,1510685370.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:30.804Z,1510685370.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:31.201Z,1510685371.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:31.605Z,1510685371.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:32.004Z,1510685372.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:32.404Z,1510685372.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:32.802Z,1510685372.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:33.202Z,1510685373.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:33.593Z,1510685373.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:34.005Z,1510685374.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:34.380Z,1510685374.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:34.805Z,1510685374.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:35.185Z,1510685375.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:35.589Z,1510685375.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:35.987Z,1510685375.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:36.386Z,1510685376.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:36.814Z,1510685376.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:37.194Z,1510685377.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:37.598Z,1510685377.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:37.999Z,1510685377.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:38.386Z,1510685378.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:38.790Z,1510685378.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:39.192Z,1510685379.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:39.643Z,1510685379.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:40.035Z,1510685380.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:40.397Z,1510685380.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:40.827Z,1510685380.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:41.191Z,1510685381.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:41.628Z,1510685381.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:42.004Z,1510685382.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:42.402Z,1510685382.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:42.808Z,1510685382.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:45.887Z,1510685385.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:46.035Z,1510685386.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:46.355Z,1510685386.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:46.754Z,1510685386.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:47.162Z,1510685387.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:47.558Z,1510685387.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:47.961Z,1510685387.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:48.362Z,1510685388.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:48.752Z,1510685388.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:49.155Z,1510685389.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:49.550Z,1510685389.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:49.983Z,1510685389.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:50.350Z,1510685390.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:50.750Z,1510685390.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:51.159Z,1510685391.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:51.559Z,1510685391.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:51.954Z,1510685391.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:52.368Z,1510685392.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:52.762Z,1510685392.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:53.162Z,1510685393.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:53.564Z,1510685393.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:53.960Z,1510685393.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:54.360Z,1510685394.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:54.756Z,1510685394.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:55.154Z,1510685395.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:55.600Z,1510685395.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:55.955Z,1510685395.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:56.360Z,1510685396.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:56.754Z,1510685396.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:57.163Z,1510685397.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:57.571Z,1510685397.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:57.964Z,1510685397.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:58.366Z,1510685398.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:58.767Z,1510685398.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:59.155Z,1510685399.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:59.563Z,1510685399.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:49:59.954Z,1510685399.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:00.351Z,1510685400.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:00.790Z,1510685400.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:01.154Z,1510685401.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:01.554Z,1510685401.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:01.991Z,1510685401.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:02.360Z,1510685402.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:02.796Z,1510685402.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:03.166Z,1510685403.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:03.568Z,1510685403.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:03.963Z,1510685403.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:04.351Z,1510685404.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:04.756Z,1510685404.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:05.151Z,1510685405.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:05.551Z,1510685405.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:05.961Z,1510685405.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:06.351Z,1510685406.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:06.751Z,1510685406.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:07.160Z,1510685407.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:07.551Z,1510685407.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:07.968Z,1510685407.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:08.372Z,1510685408.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:08.755Z,1510685408.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:09.152Z,1510685409.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:09.556Z,1510685409.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:09.951Z,1510685409.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:10.352Z,1510685410.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:10.761Z,1510685410.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:11.191Z,1510685411.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:11.551Z,1510685411.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:11.960Z,1510685411.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:12.352Z,1510685412.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:12.756Z,1510685412.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:13.161Z,1510685413.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:13.552Z,1510685413.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:13.952Z,1510685413.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:14.356Z,1510685414.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:14.751Z,1510685414.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:15.151Z,1510685415.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:15.560Z,1510685415.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:15.952Z,1510685415.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:16.351Z,1510685416.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:16.760Z,1510685416.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:17.165Z,1510685417.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:17.567Z,1510685417.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:17.961Z,1510685417.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:18.356Z,1510685418.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:18.764Z,1510685418.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:19.153Z,1510685419.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:19.560Z,1510685419.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:19.956Z,1510685419.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:20.355Z,1510685420.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:20.753Z,1510685420.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:21.156Z,1510685421.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:21.614Z,1510685421.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:21.966Z,1510685421.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:22.360Z,1510685422.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:22.762Z,1510685422.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:23.160Z,1510685423.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:23.584Z,1510685423.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:23.967Z,1510685423.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:24.387Z,1510685424.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:24.743Z,1510685424.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:25.188Z,1510685425.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:25.548Z,1510685425.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:25.951Z,1510685425.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:26.343Z,1510685426.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:26.748Z,1510685426.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:27.151Z,1510685427.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:27.551Z,1510685427.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:27.948Z,1510685427.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:28.351Z,1510685428.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:28.751Z,1510685428.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:29.147Z,1510685429.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:29.555Z,1510685429.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:29.957Z,1510685429.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:30.378Z,1510685430.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:30.750Z,1510685430.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:31.149Z,1510685431.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:31.550Z,1510685431.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:31.951Z,1510685431.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:32.349Z,1510685432.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:32.760Z,1510685432.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:33.155Z,1510685433.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:33.585Z,1510685433.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:33.951Z,1510685433.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:34.355Z,1510685434.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:34.749Z,1510685434.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:35.151Z,1510685435.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:35.555Z,1510685435.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:35.955Z,1510685435.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:36.350Z,1510685436.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:36.755Z,1510685436.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:37.153Z,1510685437.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:37.549Z,1510685437.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:37.955Z,1510685437.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:38.353Z,1510685438.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:38.783Z,1510685438.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:39.159Z,1510685439.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:39.554Z,1510685439.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:39.951Z,1510685439.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:40.355Z,1510685440.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:40.754Z,1510685440.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:41.151Z,1510685441.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:41.552Z,1510685441.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:41.955Z,1510685441.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:42.351Z,1510685442.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:42.760Z,1510685442.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:43.156Z,1510685443.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:46.205Z,1510685446.205 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-14T18:50:46.320Z,1510685446.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:46.444Z,1510685446.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:46.843Z,1510685446.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:47.210Z,1510685447.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:47.643Z,1510685447.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:48.008Z,1510685448.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:48.408Z,1510685448.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:48.802Z,1510685448.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:49.202Z,1510685449.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:49.620Z,1510685449.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:50:49.967Z,1510685449.967 [NAL9602](INFO): GPS fix at 20171114T185049: (36.802707, -121.787978)
2017-11-14T18:50:50.049Z,1510685450.049 [Default:CheckIn:Read_GPS] Stopped
2017-11-14T18:50:50.049Z,1510685450.049 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-14T18:50:50.421Z,1510685450.421 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-11-14T18:50:56.393Z,1510685456.393 [DataOverHttps](INFO): Sending 213 bytes from file Logs/20171114T184453/Courier0004.lzma
2017-11-14T18:50:57.177Z,1510685457.177 [DataOverHttps](INFO): Moved sent file to Logs/20171114T184453/Courier0004.lzma.bak
2017-11-14T18:50:57.178Z,1510685457.178 [DataOverHttps](INFO): SBD MOMSN=5236282
2017-11-14T18:51:06.377Z,1510685466.377 [DataOverHttps](INFO): Sending 300 bytes from file Logs/20171114T184453/Express0005.lzma
2017-11-14T18:51:07.161Z,1510685467.161 [DataOverHttps](INFO): Moved sent file to Logs/20171114T184453/Express0005.lzma.bak
2017-11-14T18:51:07.161Z,1510685467.161 [DataOverHttps](INFO): SBD MOMSN=5236285
2017-11-14T18:51:07.649Z,1510685467.649 [Default:CheckIn:Read_Iridium] Stopped
2017-11-14T18:51:07.649Z,1510685467.649 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-14T18:51:07.649Z,1510685467.649 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-14T18:51:08.016Z,1510685468.016 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:51:08.016Z,1510685468.016 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-11-14T18:51:08.016Z,1510685468.016 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T18:51:08.086Z,1510685468.086 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T18:51:11.263Z,1510685471.263 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T18:51:11.263Z,1510685471.263 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-11-14T18:51:11.371Z,1510685471.371 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T18:51:11.371Z,1510685471.371 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:51:11.372Z,1510685471.372 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:51:26.474Z,1510685486.474 [NAL9602](INFO): Powering down
2017-11-14T18:54:11.719Z,1510685651.719 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:54:11.719Z,1510685651.719 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-11-14T18:54:11.719Z,1510685651.719 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T18:54:11.740Z,1510685651.740 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T18:54:11.861Z,1510685651.861 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T18:54:11.861Z,1510685651.861 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-11-14T18:54:12.208Z,1510685652.208 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T18:54:12.209Z,1510685652.209 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:54:12.209Z,1510685652.209 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:55:05.031Z,1510685705.031 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-14T18:55:15.035Z,1510685715.035 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:55:15.035Z,1510685715.035 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-14T18:55:15.141Z,1510685715.141 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:55:15.141Z,1510685715.141 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:55:15.141Z,1510685715.141 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:55:15.141Z,1510685715.141 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-14T18:55:15.142Z,1510685715.142 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:55:15.434Z,1510685715.434 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:55:15.545Z,1510685715.545 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:55:15.627Z,1510685715.627 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:55:17.043Z,1510685717.043 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:55:17.043Z,1510685717.043 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-14T18:55:17.241Z,1510685717.241 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:55:17.241Z,1510685717.241 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:55:17.241Z,1510685717.241 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:55:17.241Z,1510685717.241 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-14T18:55:17.242Z,1510685717.242 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:55:17.467Z,1510685717.467 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:55:17.645Z,1510685717.645 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:55:17.728Z,1510685717.728 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:55:19.087Z,1510685719.087 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:55:19.087Z,1510685719.087 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-14T18:55:19.345Z,1510685719.345 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:55:19.346Z,1510685719.346 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:55:19.346Z,1510685719.346 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:55:19.346Z,1510685719.346 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-14T18:55:19.346Z,1510685719.346 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:55:19.465Z,1510685719.465 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:55:19.749Z,1510685719.749 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:55:19.956Z,1510685719.956 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:55:21.444Z,1510685721.444 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:55:21.444Z,1510685721.444 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-14T18:55:21.573Z,1510685721.573 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:55:21.573Z,1510685721.573 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:55:21.574Z,1510685721.574 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:55:21.574Z,1510685721.574 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-14T18:55:21.574Z,1510685721.574 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:55:21.864Z,1510685721.864 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:55:21.977Z,1510685721.977 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:55:22.061Z,1510685722.061 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:55:23.501Z,1510685723.501 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:55:23.501Z,1510685723.501 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-14T18:55:23.677Z,1510685723.677 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:55:23.677Z,1510685723.677 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:55:23.677Z,1510685723.677 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:55:23.678Z,1510685723.678 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-14T18:55:23.678Z,1510685723.678 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:55:23.875Z,1510685723.875 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:55:23.875Z,1510685723.875 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:55:24.081Z,1510685724.081 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:55:24.164Z,1510685724.164 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:56:08.218Z,1510685768.218 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-14T18:56:08.218Z,1510685768.218 [Default:CheckIn:C.Wait] Stopped
2017-11-14T18:56:08.218Z,1510685768.218 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-14T18:56:08.218Z,1510685768.218 [Default:CheckIn:D] Running Loop=1
2017-11-14T18:56:08.629Z,1510685768.629 [Default:CheckIn:D] Stopped
2017-11-14T18:56:08.629Z,1510685768.629 [Default:CheckIn:E] Running Loop=1
2017-11-14T18:56:11.717Z,1510685771.717 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 7.462771 min 
2017-11-14T18:56:11.719Z,1510685771.719 [Default:CheckIn:E] Stopped
2017-11-14T18:56:11.719Z,1510685771.719 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-14T18:56:11.719Z,1510685771.719 [Default:CheckIn] Stopped
2017-11-14T18:56:11.719Z,1510685771.719 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-14T18:56:11.719Z,1510685771.719 [Default:CheckIn](INFO): Running loop #2
2017-11-14T18:56:11.719Z,1510685771.719 [Default:CheckIn] Running Loop=2
2017-11-14T18:56:11.719Z,1510685771.719 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-14T18:56:11.719Z,1510685771.719 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-14T18:56:12.142Z,1510685772.142 [NAL9602](INFO): Powering up
2017-11-14T18:56:12.973Z,1510685772.973 [PNI_TCM](ERROR): CRC does not match. Expected:0x10868 got:0x46877
2017-11-14T18:56:19.363Z,1510685779.363 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-14T18:56:19.763Z,1510685779.763 [PNI_TCM](ERROR): CRC does not match. Expected:0x30451 got:0x59893
2017-11-14T18:56:22.581Z,1510685782.581 [PNI_TCM](ERROR): CRC does not match. Expected:0x17268 got:0x15856
2017-11-14T18:56:22.946Z,1510685782.946 [NAL9602](INFO): NAL9602 initialized
2017-11-14T18:56:24.177Z,1510685784.177 [PNI_TCM](ERROR): CRC does not match. Expected:0x30482 got:0x38208
2017-11-14T18:56:28.971Z,1510685788.971 [PNI_TCM](ERROR): CRC does not match. Expected:0x63522 got:0x30
2017-11-14T18:56:33.775Z,1510685793.775 [PNI_TCM](ERROR): CRC does not match. Expected:0x5628 got:0x6977
2017-11-14T18:56:44.973Z,1510685804.973 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-11-14T18:56:46.570Z,1510685806.570 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-14T18:56:48.172Z,1510685808.172 [PNI_TCM](ERROR): CRC does not match. Expected:0x35129 got:0x57518
2017-11-14T18:56:54.938Z,1510685814.938 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-11-14T18:56:55.021Z,1510685815.021 [NAL9602](FAULT): received: 
+CSQ:0

OK77, 2, 0, 0, 0

OK
2017-11-14T18:56:55.021Z,1510685815.021 [NAL9602] Data Fault, FailCount= 1
2017-11-14T18:56:55.021Z,1510685815.021 [NAL9602](ERROR): Data Fault
2017-11-14T18:56:55.087Z,1510685815.087 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-14T18:56:55.342Z,1510685815.342 [NAL9602](INFO): Powering down
2017-11-14T18:56:56.212Z,1510685816.212 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-14T18:56:56.212Z,1510685816.212 [NAL9602] No Fault, FailCount= 1
2017-11-14T18:56:59.371Z,1510685819.371 [PNI_TCM](ERROR): CRC does not match. Expected:0x747 got:0x42979
2017-11-14T18:57:00.968Z,1510685820.968 [PNI_TCM](ERROR): CRC does not match. Expected:0x9509 got:0x40455
2017-11-14T18:57:02.572Z,1510685822.572 [PNI_TCM](ERROR): CRC does not match. Expected:0x43331 got:0x6336
2017-11-14T18:57:05.773Z,1510685825.773 [PNI_TCM](ERROR): CRC does not match. Expected:0x55090 got:0x37847
2017-11-14T18:57:12.252Z,1510685832.252 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:57:12.252Z,1510685832.252 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-11-14T18:57:12.252Z,1510685832.252 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T18:57:12.281Z,1510685832.281 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T18:57:12.655Z,1510685832.655 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T18:57:12.655Z,1510685832.655 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-11-14T18:57:13.015Z,1510685833.015 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T18:57:13.015Z,1510685833.015 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:57:13.016Z,1510685833.016 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:57:14.600Z,1510685834.600 [BPC1](ERROR): Failed to receive battery data
2017-11-14T18:57:14.600Z,1510685834.600 [BPC1] Communications Fault, FailCount= 1
2017-11-14T18:57:14.600Z,1510685834.600 [BPC1](ERROR): Communications Fault
2017-11-14T18:57:14.631Z,1510685834.631 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-14T18:57:15.831Z,1510685835.831 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-14T18:57:15.831Z,1510685835.831 [BPC1] No Fault, FailCount= 1
2017-11-14T18:57:25.370Z,1510685845.370 [NAL9602](INFO): Powering up NAL9602
2017-11-14T18:57:36.174Z,1510685856.174 [NAL9602](INFO): NAL9602 initialized
2017-11-14T19:00:13.260Z,1510686013.260 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T19:00:13.260Z,1510686013.260 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-11-14T19:00:13.260Z,1510686013.260 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T19:00:13.308Z,1510686013.308 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T19:00:13.666Z,1510686013.666 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T19:00:13.666Z,1510686013.666 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-11-14T19:00:14.101Z,1510686014.101 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T19:00:14.101Z,1510686014.101 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T19:00:14.102Z,1510686014.102 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T19:01:12.367Z,1510686072.367 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-14T18:56:11.7Z
2017-11-14T19:01:12.367Z,1510686072.367 [Default:CheckIn:Read_GPS] Stopped
2017-11-14T19:01:12.367Z,1510686072.367 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-14T19:01:17.238Z,1510686077.238 [DataOverHttps](INFO): Sending 196 bytes from file Logs/20171114T184453/Courier0008.lzma
2017-11-14T19:01:18.037Z,1510686078.037 [DataOverHttps](INFO): Moved sent file to Logs/20171114T184453/Courier0008.lzma.bak
2017-11-14T19:01:18.038Z,1510686078.038 [DataOverHttps](INFO): SBD MOMSN=5236420
2017-11-14T19:01:28.755Z,1510686088.755 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-14T19:01:28.845Z,1510686088.845 [DataOverHttps](INFO): Sending 271 bytes from file Logs/20171114T184453/Express0009.lzma
2017-11-14T19:01:29.625Z,1510686089.625 [DataOverHttps](INFO): Moved sent file to Logs/20171114T184453/Express0009.lzma.bak
2017-11-14T19:01:29.625Z,1510686089.625 [DataOverHttps](INFO): SBD MOMSN=5236422
2017-11-14T19:01:30.108Z,1510686090.108 [Default:CheckIn:Read_Iridium] Stopped
2017-11-14T19:01:30.108Z,1510686090.108 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-14T19:01:30.108Z,1510686090.108 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-14T19:01:50.047Z,1510686110.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:01:50.447Z,1510686110.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:01:50.847Z,1510686110.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:01:59.230Z,1510686119.230 [NAL9602](INFO): Powering down
2017-11-14T19:03:14.489Z,1510686194.489 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T19:03:14.489Z,1510686194.489 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-11-14T19:03:14.489Z,1510686194.489 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T19:03:14.503Z,1510686194.503 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T19:03:14.897Z,1510686194.897 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T19:03:14.897Z,1510686194.897 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-11-14T19:03:15.284Z,1510686195.284 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T19:03:15.284Z,1510686195.284 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T19:03:15.285Z,1510686195.285 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T19:05:05.339Z,1510686305.339 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-14T19:05:23.759Z,1510686323.759 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T19:05:23.759Z,1510686323.759 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-14T19:05:24.033Z,1510686324.033 [Rowe_600LCM](INFO): Initializing
2017-11-14T19:05:24.033Z,1510686324.033 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T19:05:24.033Z,1510686324.033 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T19:05:24.033Z,1510686324.033 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-14T19:05:24.033Z,1510686324.033 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T19:05:24.159Z,1510686324.159 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T19:05:24.437Z,1510686324.437 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T19:05:24.642Z,1510686324.642 [Rowe_600LCM](INFO): Powering down
2017-11-14T19:05:26.152Z,1510686326.152 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T19:05:26.152Z,1510686326.152 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-14T19:05:26.258Z,1510686326.258 [Rowe_600LCM](INFO): Initializing
2017-11-14T19:05:26.259Z,1510686326.259 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T19:05:26.259Z,1510686326.259 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T19:05:26.259Z,1510686326.259 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-14T19:05:26.259Z,1510686326.259 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T19:05:26.539Z,1510686326.539 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T19:05:26.663Z,1510686326.663 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T19:05:26.747Z,1510686326.747 [Rowe_600LCM](INFO): Powering down
2017-11-14T19:05:28.124Z,1510686328.124 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T19:05:28.137Z,1510686328.137 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-14T19:05:28.361Z,1510686328.361 [Rowe_600LCM](INFO): Initializing
2017-11-14T19:05:28.361Z,1510686328.361 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T19:05:28.362Z,1510686328.362 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T19:05:28.362Z,1510686328.362 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-14T19:05:28.362Z,1510686328.362 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T19:05:28.540Z,1510686328.540 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T19:05:28.765Z,1510686328.765 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T19:05:28.850Z,1510686328.850 [Rowe_600LCM](INFO): Powering down
2017-11-14T19:05:30.128Z,1510686330.128 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T19:05:30.128Z,1510686330.128 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-14T19:05:30.475Z,1510686330.475 [Rowe_600LCM](INFO): Initializing
2017-11-14T19:05:30.476Z,1510686330.476 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T19:05:30.476Z,1510686330.476 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T19:05:30.476Z,1510686330.476 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-14T19:05:30.476Z,1510686330.476 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T19:05:30.574Z,1510686330.574 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T19:05:30.882Z,1510686330.882 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T19:05:31.073Z,1510686331.073 [Rowe_600LCM](INFO): Powering down
2017-11-14T19:05:34.600Z,1510686334.600 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T19:05:34.600Z,1510686334.600 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-14T19:05:34.709Z,1510686334.709 [Rowe_600LCM](INFO): Initializing
2017-11-14T19:05:34.709Z,1510686334.709 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T19:05:34.710Z,1510686334.710 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T19:05:34.710Z,1510686334.710 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-14T19:05:34.710Z,1510686334.710 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T19:05:34.743Z,1510686334.743 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T19:05:34.743Z,1510686334.743 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-14T19:05:35.113Z,1510686335.113 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T19:05:35.221Z,1510686335.221 [Rowe_600LCM](INFO): Powering down
2017-11-14T19:06:15.463Z,1510686375.463 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T19:06:15.463Z,1510686375.463 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-11-14T19:06:15.463Z,1510686375.463 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T19:06:15.502Z,1510686375.502 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T19:06:15.913Z,1510686375.913 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T19:06:15.913Z,1510686375.913 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-11-14T19:06:16.259Z,1510686376.259 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T19:06:16.260Z,1510686376.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T19:06:16.260Z,1510686376.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T19:06:30.670Z,1510686390.670 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-14T19:06:30.670Z,1510686390.670 [Default:CheckIn:C.Wait] Stopped
2017-11-14T19:06:30.671Z,1510686390.671 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-14T19:06:30.671Z,1510686390.671 [Default:CheckIn:D] Running Loop=1
2017-11-14T19:06:31.075Z,1510686391.075 [Default:CheckIn:D] Stopped
2017-11-14T19:06:31.075Z,1510686391.075 [Default:CheckIn:E] Running Loop=1
2017-11-14T19:06:31.471Z,1510686391.471 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 17.836906 min 
2017-11-14T19:06:31.472Z,1510686391.472 [Default:CheckIn:E] Stopped
2017-11-14T19:06:31.472Z,1510686391.472 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-14T19:06:31.472Z,1510686391.472 [Default:CheckIn] Stopped
2017-11-14T19:06:31.472Z,1510686391.472 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-14T19:06:31.472Z,1510686391.472 [Default:CheckIn](INFO): Running loop #3
2017-11-14T19:06:31.472Z,1510686391.472 [Default:CheckIn] Running Loop=3
2017-11-14T19:06:31.472Z,1510686391.472 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-14T19:06:31.472Z,1510686391.472 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-14T19:06:34.646Z,1510686394.646 [NAL9602](INFO): Powering up
2017-11-14T19:06:43.803Z,1510686403.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:06:44.203Z,1510686404.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:06:44.605Z,1510686404.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:06:45.789Z,1510686405.789 [NAL9602](INFO): NAL9602 initialized
2017-11-14T19:06:46.586Z,1510686406.586 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-14T19:06:46.586Z,1510686406.586 [NAL9602] Data Fault, FailCount= 2
2017-11-14T19:06:46.586Z,1510686406.586 [NAL9602](ERROR): Data Fault
2017-11-14T19:06:46.666Z,1510686406.666 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-14T19:06:46.986Z,1510686406.986 [NAL9602](INFO): Powering down
2017-11-14T19:06:47.841Z,1510686407.841 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-14T19:06:47.842Z,1510686407.842 [NAL9602] No Fault, FailCount= 2
2017-11-14T19:07:12.613Z,1510686432.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:13.002Z,1510686433.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:13.402Z,1510686433.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:13.810Z,1510686433.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:14.202Z,1510686434.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:14.602Z,1510686434.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:15.003Z,1510686435.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:15.407Z,1510686435.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:15.802Z,1510686435.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:16.203Z,1510686436.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:16.607Z,1510686436.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:17.001Z,1510686437.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:17.391Z,1510686437.391 [NAL9602](INFO): Powering up NAL9602
2017-11-14T19:07:17.408Z,1510686437.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:17.803Z,1510686437.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:18.207Z,1510686438.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:18.606Z,1510686438.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:19.009Z,1510686439.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:19.408Z,1510686439.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:19.808Z,1510686439.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:20.208Z,1510686440.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:20.608Z,1510686440.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:21.007Z,1510686441.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:21.408Z,1510686441.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:21.808Z,1510686441.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:22.205Z,1510686442.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:22.609Z,1510686442.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:23.007Z,1510686443.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:23.405Z,1510686443.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:23.805Z,1510686443.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:24.208Z,1510686444.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:24.607Z,1510686444.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:25.005Z,1510686445.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:25.409Z,1510686445.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:25.809Z,1510686445.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:26.208Z,1510686446.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:26.602Z,1510686446.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:27.002Z,1510686447.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:27.407Z,1510686447.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:27.807Z,1510686447.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:28.214Z,1510686448.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:28.590Z,1510686448.590 [NAL9602](INFO): NAL9602 initialized
2017-11-14T19:07:28.607Z,1510686448.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:29.003Z,1510686449.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:29.414Z,1510686449.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:29.822Z,1510686449.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:30.222Z,1510686450.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:30.606Z,1510686450.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:31.006Z,1510686451.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:31.413Z,1510686451.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:31.819Z,1510686451.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:34.956Z,1510686454.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:35.085Z,1510686455.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:35.425Z,1510686455.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:35.826Z,1510686455.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:36.220Z,1510686456.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:36.620Z,1510686456.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:37.021Z,1510686457.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:37.418Z,1510686457.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:37.818Z,1510686457.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:38.221Z,1510686458.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:38.618Z,1510686458.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:39.021Z,1510686459.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:39.421Z,1510686459.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:39.832Z,1510686459.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:40.231Z,1510686460.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:40.626Z,1510686460.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:41.021Z,1510686461.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:41.425Z,1510686461.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:41.826Z,1510686461.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:42.215Z,1510686462.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:42.615Z,1510686462.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:43.015Z,1510686463.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:43.422Z,1510686463.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:43.826Z,1510686463.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:44.241Z,1510686464.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:44.634Z,1510686464.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:45.016Z,1510686465.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:45.420Z,1510686465.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:45.816Z,1510686465.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:46.215Z,1510686466.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:46.619Z,1510686466.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:47.015Z,1510686467.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:47.415Z,1510686467.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:47.423Z,1510686467.423 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-14T19:07:47.423Z,1510686467.423 [BPC1] Data Fault, FailCount= 1
2017-11-14T19:07:47.423Z,1510686467.423 [BPC1](ERROR): Data Fault
2017-11-14T19:07:47.485Z,1510686467.485 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-14T19:07:47.819Z,1510686467.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:48.219Z,1510686468.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:48.633Z,1510686468.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:48.686Z,1510686468.686 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-14T19:07:48.687Z,1510686468.687 [BPC1] No Fault, FailCount= 1
2017-11-14T19:07:49.026Z,1510686469.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:49.415Z,1510686469.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:49.815Z,1510686469.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:50.219Z,1510686470.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:50.615Z,1510686470.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:51.015Z,1510686471.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:51.419Z,1510686471.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:51.819Z,1510686471.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:52.215Z,1510686472.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:52.620Z,1510686472.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:53.030Z,1510686473.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:53.426Z,1510686473.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:53.815Z,1510686473.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:54.215Z,1510686474.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:54.619Z,1510686474.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:55.023Z,1510686475.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:55.418Z,1510686475.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:55.821Z,1510686475.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:56.219Z,1510686476.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:56.621Z,1510686476.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:57.022Z,1510686477.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:57.418Z,1510686477.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:57.822Z,1510686477.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:58.215Z,1510686478.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:58.616Z,1510686478.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:59.016Z,1510686479.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:59.415Z,1510686479.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:07:59.815Z,1510686479.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:00.219Z,1510686480.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:00.615Z,1510686480.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:01.015Z,1510686481.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:01.426Z,1510686481.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:01.825Z,1510686481.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:02.215Z,1510686482.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:02.615Z,1510686482.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:03.019Z,1510686483.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:03.416Z,1510686483.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:03.823Z,1510686483.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:04.220Z,1510686484.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:04.626Z,1510686484.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:05.025Z,1510686485.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:05.415Z,1510686485.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:05.829Z,1510686485.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:06.226Z,1510686486.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:06.615Z,1510686486.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:07.020Z,1510686487.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:07.425Z,1510686487.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:07.814Z,1510686487.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:08.215Z,1510686488.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:08.615Z,1510686488.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:09.015Z,1510686489.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:09.415Z,1510686489.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:09.815Z,1510686489.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:10.229Z,1510686490.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:10.629Z,1510686490.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:11.034Z,1510686491.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:11.429Z,1510686491.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:11.819Z,1510686491.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:12.222Z,1510686492.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:12.620Z,1510686492.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:13.021Z,1510686493.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:13.424Z,1510686493.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:13.820Z,1510686493.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:14.222Z,1510686494.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:14.625Z,1510686494.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:15.020Z,1510686495.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:15.431Z,1510686495.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:15.831Z,1510686495.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:16.235Z,1510686496.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:16.633Z,1510686496.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:17.015Z,1510686497.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:17.415Z,1510686497.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:17.815Z,1510686497.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:18.215Z,1510686498.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:18.615Z,1510686498.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:19.015Z,1510686499.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:19.419Z,1510686499.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:19.815Z,1510686499.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:20.236Z,1510686500.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:20.636Z,1510686500.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:21.025Z,1510686501.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:21.425Z,1510686501.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:21.823Z,1510686501.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:22.223Z,1510686502.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:22.617Z,1510686502.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:23.023Z,1510686503.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:23.426Z,1510686503.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:23.822Z,1510686503.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:24.219Z,1510686504.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:24.625Z,1510686504.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:25.022Z,1510686505.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:25.433Z,1510686505.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:25.830Z,1510686505.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:26.231Z,1510686506.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:26.635Z,1510686506.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:27.015Z,1510686507.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:27.415Z,1510686507.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:27.826Z,1510686507.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:28.222Z,1510686508.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:28.616Z,1510686508.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:29.016Z,1510686509.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:29.418Z,1510686509.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:29.819Z,1510686509.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:30.215Z,1510686510.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:30.625Z,1510686510.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:31.025Z,1510686511.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:31.434Z,1510686511.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:31.834Z,1510686511.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:35.096Z,1510686515.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:35.113Z,1510686515.113 [BPC1](ERROR): Failed to receive battery data
2017-11-14T19:08:35.113Z,1510686515.113 [BPC1] Communications Fault, FailCount= 1
2017-11-14T19:08:35.113Z,1510686515.113 [BPC1](ERROR): Communications Fault
2017-11-14T19:08:35.159Z,1510686515.159 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-14T19:08:35.224Z,1510686515.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:35.608Z,1510686515.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:36.009Z,1510686516.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:36.040Z,1510686516.040 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-14T19:08:36.040Z,1510686516.040 [BPC1] No Fault, FailCount= 1
2017-11-14T19:08:36.391Z,1510686516.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:36.807Z,1510686516.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:37.191Z,1510686517.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:37.588Z,1510686517.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:37.987Z,1510686517.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:38.388Z,1510686518.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:38.788Z,1510686518.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:39.187Z,1510686519.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:39.587Z,1510686519.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:39.991Z,1510686519.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:40.386Z,1510686520.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:40.787Z,1510686520.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:41.187Z,1510686521.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:41.591Z,1510686521.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:41.987Z,1510686521.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:42.391Z,1510686522.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:42.786Z,1510686522.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:43.187Z,1510686523.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:43.591Z,1510686523.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:43.991Z,1510686523.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:44.388Z,1510686524.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:44.813Z,1510686524.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:45.198Z,1510686525.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:45.587Z,1510686525.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:45.992Z,1510686525.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:46.386Z,1510686526.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:46.791Z,1510686526.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:47.194Z,1510686527.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:47.590Z,1510686527.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:47.993Z,1510686527.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:48.396Z,1510686528.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:48.796Z,1510686528.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:49.204Z,1510686529.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:49.604Z,1510686529.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:49.990Z,1510686529.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:50.393Z,1510686530.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:50.795Z,1510686530.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:51.190Z,1510686531.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:51.595Z,1510686531.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:51.997Z,1510686531.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:52.394Z,1510686532.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:52.787Z,1510686532.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:53.214Z,1510686533.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:53.611Z,1510686533.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:54.012Z,1510686534.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:54.404Z,1510686534.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:54.788Z,1510686534.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:55.188Z,1510686535.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:55.588Z,1510686535.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:55.987Z,1510686535.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:56.387Z,1510686536.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:56.787Z,1510686536.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:57.191Z,1510686537.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T19:08:57.587Z,1510686537.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T1