2017-11-14T17:58:40.581Z,1510682320.581 [Supervisor](DEBUG): Initializing supervisor.
2017-11-14T17:58:40.584Z,1510682320.584 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2017-11-14T17:58:40.585Z,1510682320.585 [SyncHandler](INFO): Protected caller Thread ID is 799
2017-11-14T17:58:40.585Z,1510682320.585 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2017-11-14T17:58:40.586Z,1510682320.586 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2017-11-14T17:58:40.586Z,1510682320.586 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 800
2017-11-14T17:58:40.589Z,1510682320.589 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2017-11-14T17:58:40.600Z,1510682320.600 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2017-11-14T17:58:40.601Z,1510682320.601 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2017-11-14T17:58:40.601Z,1510682320.601 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 801
2017-11-14T17:58:40.602Z,1510682320.602 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2017-11-14T17:58:40.603Z,1510682320.603 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2017-11-14T17:58:40.603Z,1510682320.603 [logger ThreadHandler](INFO): Protected caller Thread ID is 802
2017-11-14T17:58:40.605Z,1510682320.605 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2017-11-14T17:58:40.605Z,1510682320.605 [Supervisor](INFO): Looking for Config files in directory: Config/
2017-11-14T17:58:40.611Z,1510682320.611 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2017-11-14T17:58:40.915Z,1510682320.915 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2017-11-14T17:58:40.917Z,1510682320.917 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2017-11-14T17:58:41.011Z,1510682321.011 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2017-11-14T17:58:41.011Z,1510682321.011 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2017-11-14T17:58:41.443Z,1510682321.443 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2017-11-14T17:58:41.445Z,1510682321.445 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2017-11-14T17:58:41.542Z,1510682321.542 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2017-11-14T17:58:41.543Z,1510682321.543 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2017-11-14T17:58:41.723Z,1510682321.723 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2017-11-14T17:58:41.724Z,1510682321.724 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2017-11-14T17:58:41.986Z,1510682321.986 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2017-11-14T17:58:41.987Z,1510682321.987 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2017-11-14T17:58:42.166Z,1510682322.166 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2017-11-14T17:58:42.166Z,1510682322.166 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2017-11-14T17:58:42.246Z,1510682322.246 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2017-11-14T17:58:42.370Z,1510682322.370 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2017-11-14T17:58:42.371Z,1510682322.371 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2017-11-14T17:58:42.696Z,1510682322.696 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2017-11-14T17:58:42.697Z,1510682322.697 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2017-11-14T17:58:43.114Z,1510682323.114 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2017-11-14T17:58:43.114Z,1510682323.114 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2017-11-14T17:58:43.304Z,1510682323.304 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2017-11-14T17:58:43.305Z,1510682323.305 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2017-11-14T17:58:43.585Z,1510682323.585 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2017-11-14T17:58:43.586Z,1510682323.586 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2017-11-14T17:58:43.687Z,1510682323.687 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2017-11-14T17:58:43.688Z,1510682323.688 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2017-11-14T17:58:43.830Z,1510682323.830 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2017-11-14T17:58:43.832Z,1510682323.832 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-opah/
2017-11-14T17:58:43.836Z,1510682323.836 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Control.cfg
2017-11-14T17:58:43.974Z,1510682323.974 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/secure.cfg
2017-11-14T17:58:44.836Z,1510682324.836 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Simulator.cfg
2017-11-14T17:58:44.945Z,1510682324.945 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/BIT.cfg
2017-11-14T17:58:45.051Z,1510682325.051 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Battery.cfg
2017-11-14T17:58:45.269Z,1510682325.269 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2017-11-14T17:58:45.270Z,1510682325.270 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Science.cfg
2017-11-14T17:58:45.408Z,1510682325.408 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/logger.cfg
2017-11-14T17:58:45.501Z,1510682325.501 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Sensor.cfg
2017-11-14T17:58:45.651Z,1510682325.651 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/vehicle.cfg
2017-11-14T17:58:45.804Z,1510682325.804 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Navigation.cfg
2017-11-14T17:58:45.903Z,1510682325.903 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Servo.cfg
2017-11-14T17:58:46.008Z,1510682326.008 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2017-11-14T17:58:46.022Z,1510682326.022 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2017-11-14T17:58:46.170Z,1510682326.170 [SBIT](DEBUG): Construct Startup Built In Test.
2017-11-14T17:58:46.199Z,1510682326.199 [SBIT] Loaded
2017-11-14T17:58:46.200Z,1510682326.200 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2017-11-14T17:58:46.200Z,1510682326.200 [IBIT](DEBUG): Construct Initiated Built In Test.
2017-11-14T17:58:46.226Z,1510682326.226 [IBIT] Loaded
2017-11-14T17:58:46.227Z,1510682326.227 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2017-11-14T17:58:46.230Z,1510682326.230 [CBIT](DEBUG): Construct Continuous Built In Test.
2017-11-14T17:58:46.374Z,1510682326.374 [CBIT] Loaded
2017-11-14T17:58:46.375Z,1510682326.375 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2017-11-14T17:58:46.375Z,1510682326.375 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2017-11-14T17:58:46.376Z,1510682326.376 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2017-11-14T17:58:46.644Z,1510682326.644 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2017-11-14T17:58:46.646Z,1510682326.646 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2017-11-14T17:58:47.172Z,1510682327.172 [DataOverHttps] Loaded
2017-11-14T17:58:47.173Z,1510682327.173 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2017-11-14T17:58:47.199Z,1510682327.199 [Depth_Keller] Loaded
2017-11-14T17:58:47.199Z,1510682327.199 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2017-11-14T17:58:47.204Z,1510682327.204 [DropWeight] Loaded
2017-11-14T17:58:47.204Z,1510682327.204 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2017-11-14T17:58:47.292Z,1510682327.292 [NAL9602] Loaded
2017-11-14T17:58:47.292Z,1510682327.292 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2017-11-14T17:58:47.301Z,1510682327.301 [Onboard] Loaded
2017-11-14T17:58:47.301Z,1510682327.301 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2017-11-14T17:58:47.307Z,1510682327.307 [Radio_Surface] Loaded
2017-11-14T17:58:47.308Z,1510682327.308 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2017-11-14T17:58:47.309Z,1510682327.309 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 407BC4E0
2017-11-14T17:58:47.309Z,1510682327.309 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 881
2017-11-14T17:58:47.315Z,1510682327.315 [SCPI] Loaded
2017-11-14T17:58:47.316Z,1510682327.316 [ComponentRegistry](DEBUG): SyncComponent "SCPI" handled in the control thread.
2017-11-14T17:58:47.467Z,1510682327.467 [PNI_TCM] Loaded
2017-11-14T17:58:47.467Z,1510682327.467 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2017-11-14T17:58:47.527Z,1510682327.527 [Rowe_600LCM] Loaded
2017-11-14T17:58:47.528Z,1510682327.528 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2017-11-14T17:58:47.529Z,1510682327.529 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 407EC4E0
2017-11-14T17:58:47.529Z,1510682327.529 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 882
2017-11-14T17:58:49.476Z,1510682329.476 [BPC1] Loaded
2017-11-14T17:58:49.476Z,1510682329.476 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2017-11-14T17:58:49.477Z,1510682329.477 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2017-11-14T17:58:49.477Z,1510682329.477 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2017-11-14T17:58:49.646Z,1510682329.646 [Aanderaa_O2] Loaded
2017-11-14T17:58:49.646Z,1510682329.646 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2017-11-14T17:58:49.679Z,1510682329.679 [CTD_Seabird] Loaded
2017-11-14T17:58:49.680Z,1510682329.680 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2017-11-14T17:58:49.681Z,1510682329.681 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 408754E0
2017-11-14T17:58:49.681Z,1510682329.681 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 884
2017-11-14T17:58:49.697Z,1510682329.697 [ESPComponent] Loaded
2017-11-14T17:58:49.697Z,1510682329.697 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2017-11-14T17:58:49.711Z,1510682329.711 [PAR_Licor] Loaded
2017-11-14T17:58:49.711Z,1510682329.711 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2017-11-14T17:58:49.759Z,1510682329.759 [WetLabsBB2FL] Loaded
2017-11-14T17:58:49.759Z,1510682329.759 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2017-11-14T17:58:49.760Z,1510682329.760 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 408A54E0
2017-11-14T17:58:49.760Z,1510682329.760 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 885
2017-11-14T17:58:49.761Z,1510682329.761 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2017-11-14T17:58:49.761Z,1510682329.761 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2017-11-14T17:58:49.848Z,1510682329.848 [VerticalControl](DEBUG): Construct VerticalControl.
2017-11-14T17:58:49.944Z,1510682329.944 [VerticalControl] Loaded
2017-11-14T17:58:49.944Z,1510682329.944 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2017-11-14T17:58:49.945Z,1510682329.945 [HorizontalControl](DEBUG): Construct HorizontalControl.
2017-11-14T17:58:50.005Z,1510682330.005 [HorizontalControl] Loaded
2017-11-14T17:58:50.005Z,1510682330.005 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2017-11-14T17:58:50.006Z,1510682330.006 [SpeedControl](DEBUG): Construct SpeedControl.
2017-11-14T17:58:50.011Z,1510682330.011 [SpeedControl] Loaded
2017-11-14T17:58:50.012Z,1510682330.012 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2017-11-14T17:58:50.013Z,1510682330.013 [LoopControl](DEBUG): Construct LoopControl.
2017-11-14T17:58:50.013Z,1510682330.013 [LoopControl] Loaded
2017-11-14T17:58:50.013Z,1510682330.013 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2017-11-14T17:58:50.014Z,1510682330.014 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2017-11-14T17:58:50.014Z,1510682330.014 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2017-11-14T17:58:50.038Z,1510682330.038 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2017-11-14T17:58:50.038Z,1510682330.038 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2017-11-14T17:58:50.153Z,1510682330.153 [BuoyancyServo] Loaded
2017-11-14T17:58:50.154Z,1510682330.154 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2017-11-14T17:58:50.165Z,1510682330.165 [ElevatorServo] Loaded
2017-11-14T17:58:50.165Z,1510682330.165 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2017-11-14T17:58:50.175Z,1510682330.175 [MassServo] Loaded
2017-11-14T17:58:50.176Z,1510682330.176 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2017-11-14T17:58:50.186Z,1510682330.186 [RudderServo] Loaded
2017-11-14T17:58:50.187Z,1510682330.187 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2017-11-14T17:58:50.198Z,1510682330.198 [ThrusterServo] Loaded
2017-11-14T17:58:50.198Z,1510682330.198 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2017-11-14T17:58:50.198Z,1510682330.198 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2017-11-14T17:58:50.199Z,1510682330.199 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2017-11-14T17:58:50.235Z,1510682330.235 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2017-11-14T17:58:50.236Z,1510682330.236 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2017-11-14T17:58:50.272Z,1510682330.272 [DepthRateCalculator] Loaded
2017-11-14T17:58:50.272Z,1510682330.272 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2017-11-14T17:58:50.277Z,1510682330.277 [PitchRateCalculator] Loaded
2017-11-14T17:58:50.277Z,1510682330.277 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2017-11-14T17:58:50.292Z,1510682330.292 [SpeedCalculator] Loaded
2017-11-14T17:58:50.292Z,1510682330.292 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2017-11-14T17:58:50.313Z,1510682330.313 [TempGradientCalculator] Loaded
2017-11-14T17:58:50.313Z,1510682330.313 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2017-11-14T17:58:50.329Z,1510682330.329 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2017-11-14T17:58:50.329Z,1510682330.329 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2017-11-14T17:58:50.334Z,1510682330.334 [YawRateCalculator] Loaded
2017-11-14T17:58:50.334Z,1510682330.334 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2017-11-14T17:58:50.335Z,1510682330.335 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2017-11-14T17:58:50.335Z,1510682330.335 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2017-11-14T17:58:50.457Z,1510682330.457 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2017-11-14T17:58:50.458Z,1510682330.458 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2017-11-14T17:58:50.567Z,1510682330.567 [DeadReckonUsingMultipleVelocitySources] Loaded
2017-11-14T17:58:50.567Z,1510682330.567 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2017-11-14T17:58:50.620Z,1510682330.620 [DeadReckonUsingSpeedCalculator] Loaded
2017-11-14T17:58:50.620Z,1510682330.620 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2017-11-14T17:58:50.674Z,1510682330.674 [DeadReckonWithRespectToSeafloor] Loaded
2017-11-14T17:58:50.674Z,1510682330.674 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2017-11-14T17:58:50.690Z,1510682330.690 [NavChart] Loaded
2017-11-14T17:58:50.690Z,1510682330.690 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2017-11-14T17:58:50.694Z,1510682330.694 [UniversalFixResidualReporter] Loaded
2017-11-14T17:58:50.694Z,1510682330.694 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2017-11-14T17:58:50.695Z,1510682330.695 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2017-11-14T17:58:50.695Z,1510682330.695 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2017-11-14T17:58:50.812Z,1510682330.812 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2017-11-14T17:58:50.812Z,1510682330.812 [StratificationFrontDetector](DEBUG): (re)initializing
2017-11-14T17:58:50.812Z,1510682330.812 [StratificationFrontDetector] Loaded
2017-11-14T17:58:50.812Z,1510682330.812 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2017-11-14T17:58:50.813Z,1510682330.813 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2017-11-14T17:58:50.817Z,1510682330.817 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2017-11-14T17:58:50.817Z,1510682330.817 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2017-11-14T17:58:50.824Z,1510682330.824 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2017-11-14T17:58:50.825Z,1510682330.825 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A164E0
2017-11-14T17:58:50.825Z,1510682330.825 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 886
2017-11-14T17:58:50.830Z,1510682330.830 [Supervisor](INFO): Main Thread ID is 794
2017-11-14T17:58:50.830Z,1510682330.830 [Supervisor](DEBUG): Running supervisor.
2017-11-14T17:58:50.831Z,1510682330.831 [CommandLine ThreadHandler](INFO): Handler Thread ID is 887
2017-11-14T17:58:50.833Z,1510682330.833 [controlThread ThreadHandler](INFO): Handler Thread ID is 888
2017-11-14T17:58:50.834Z,1510682330.834 [controlThread](DEBUG): Initializing ControlThread
2017-11-14T17:58:50.835Z,1510682330.835 [SBIT](INFO): Initialize SBIT Component.
2017-11-14T17:58:50.835Z,1510682330.835 [SBIT](IMPORTANT): git: 2017-10-26-27-g28caa4f
2017-11-14T17:58:50.835Z,1510682330.835 [SBIT](INFO): git hash: 28caa4f52d4014465ae2cbbbbc56c9b8302a605b
2017-11-14T17:58:50.836Z,1510682330.836 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2017-11-14T17:58:50.837Z,1510682330.837 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #17 PREEMPT Fri Oct 6 17:22:04 PDT 2017
2017-11-14T17:58:50.838Z,1510682330.838 [SBIT](INFO): Beginning SBIT in 39.000000 seconds.
2017-11-14T17:58:50.839Z,1510682330.839 [IBIT](INFO): Initialize IBIT Component.
2017-11-14T17:58:50.839Z,1510682330.839 [CBIT](DEBUG): Initialize CBIT Component.
2017-11-14T17:58:50.840Z,1510682330.840 [CBIT](CRITICAL): LAST REBOOT DUE TO WATCHDOG TIMER RESET.
2017-11-14T17:58:50.841Z,1510682330.841 [logger ThreadHandler](INFO): Handler Thread ID is 889
2017-11-14T17:58:50.868Z,1510682330.868 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 890
2017-11-14T17:58:50.874Z,1510682330.874 [Radio_Surface](INFO): Powering up
2017-11-14T17:58:50.889Z,1510682330.889 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 891
2017-11-14T17:58:50.889Z,1510682330.889 [Rowe_600LCM](INFO): Initializing
2017-11-14T17:58:50.890Z,1510682330.890 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T17:58:50.996Z,1510682330.996 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 892
2017-11-14T17:58:50.997Z,1510682330.997 [CTD_Seabird](INFO): Initializing
2017-11-14T17:58:51.020Z,1510682331.020 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2017-11-14T17:58:51.023Z,1510682331.023 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2017-11-14T17:58:51.025Z,1510682331.025 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 894
2017-11-14T17:58:51.026Z,1510682331.026 [WetLabsBB2FL](INFO): Powering down
2017-11-14T17:58:51.044Z,1510682331.044 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2017-11-14T17:58:51.045Z,1510682331.045 [LoopControl](DEBUG): Initialize LoopControlComponent.
2017-11-14T17:58:51.046Z,1510682331.046 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-11-14T17:58:51.046Z,1510682331.046 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2017-11-14T17:58:51.047Z,1510682331.047 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2017-11-14T17:58:51.047Z,1510682331.047 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2017-11-14T17:58:51.062Z,1510682331.062 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2017-11-14T17:58:51.064Z,1510682331.064 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2017-11-14T17:58:51.065Z,1510682331.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-14T17:58:51.065Z,1510682331.065 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T17:58:51.066Z,1510682331.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T17:58:51.066Z,1510682331.066 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-14T17:58:51.067Z,1510682331.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T17:58:51.067Z,1510682331.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T17:58:51.068Z,1510682331.068 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T17:58:51.194Z,1510682331.194 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T17:58:51.194Z,1510682331.194 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T17:58:51.194Z,1510682331.194 [NavChart](DEBUG): Initialize NavChart Navigation.
2017-11-14T17:58:51.195Z,1510682331.195 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2017-11-14T17:58:51.196Z,1510682331.196 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2017-11-14T17:58:51.206Z,1510682331.206 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 895
2017-11-14T17:58:51.213Z,1510682331.213 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2017-11-14T17:58:51.213Z,1510682331.213 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2017-11-14T17:58:51.213Z,1510682331.213 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2017-11-14T17:58:51.214Z,1510682331.214 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2017-11-14T17:58:51.214Z,1510682331.214 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2017-11-14T17:58:51.214Z,1510682331.214 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2017-11-14T17:58:51.214Z,1510682331.214 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2017-11-14T17:58:51.214Z,1510682331.214 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2017-11-14T17:58:51.214Z,1510682331.214 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2017-11-14T17:58:51.215Z,1510682331.215 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2017-11-14T17:58:51.215Z,1510682331.215 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2017-11-14T17:58:51.215Z,1510682331.215 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2017-11-14T17:58:51.215Z,1510682331.215 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2017-11-14T17:58:51.215Z,1510682331.215 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2017-11-14T17:58:51.215Z,1510682331.215 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2017-11-14T17:58:51.216Z,1510682331.216 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2017-11-14T17:58:51.278Z,1510682331.278 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-11-14T17:58:51.278Z,1510682331.278 [CTD_Seabird](INFO): Powering down
2017-11-14T17:58:51.324Z,1510682331.324 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2017-11-14T17:58:51.357Z,1510682331.357 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2017-11-14T17:58:51.424Z,1510682331.424 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2017-11-14T17:58:51.473Z,1510682331.473 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T17:58:51.473Z,1510682331.473 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-14T17:58:51.473Z,1510682331.473 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T17:58:51.515Z,1510682331.515 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2017-11-14T17:58:51.516Z,1510682331.516 [Default:A.Wait](DEBUG): Construct Wait.
2017-11-14T17:58:51.518Z,1510682331.518 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2017-11-14T17:58:51.539Z,1510682331.539 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2017-11-14T17:58:51.567Z,1510682331.567 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2017-11-14T17:58:51.607Z,1510682331.607 [Default:E.Execute](DEBUG): Construct Execute.
2017-11-14T17:58:51.617Z,1510682331.617 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2017-11-14T17:58:51.622Z,1510682331.622 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,SCPI,PNI_TCM,BPC1,Aanderaa_O2,ESPComponent,PAR_Licor,Depth_Keller,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2017-11-14T17:58:51.647Z,1510682331.647 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2017-11-14T17:58:51.896Z,1510682331.896 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T17:58:52.109Z,1510682332.109 [Rowe_600LCM](INFO): Powering down
2017-11-14T17:58:52.356Z,1510682332.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:52.357Z,1510682332.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T17:58:52.437Z,1510682332.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:52.458Z,1510682332.458 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:52.480Z,1510682332.480 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:52.576Z,1510682332.576 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-11-14T17:58:52.584Z,1510682332.584 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-11-14T17:58:52.595Z,1510682332.595 [ElevatorServo](DEBUG): Initializing EZServoServo.
2017-11-14T17:58:52.600Z,1510682332.600 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2017-11-14T17:58:52.622Z,1510682332.622 [MassServo](DEBUG): Initializing EZServoServo.
2017-11-14T17:58:52.628Z,1510682332.628 [MassServo](DEBUG): Initializing MassServo.
2017-11-14T17:58:52.638Z,1510682332.638 [RudderServo](DEBUG): Initializing EZServoServo.
2017-11-14T17:58:52.644Z,1510682332.644 [RudderServo](DEBUG): Initializing RudderServo.
2017-11-14T17:58:52.650Z,1510682332.650 [ThrusterServo](DEBUG): Initializing EZServoServo.
2017-11-14T17:58:52.656Z,1510682332.656 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2017-11-14T17:58:52.694Z,1510682332.694 [CommandLine](FAULT): Scheduling is paused
2017-11-14T17:58:52.694Z,1510682332.694 [CBIT](INFO): Critical error at 20171114T175850
2017-11-14T17:58:52.695Z,1510682332.695 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2017-11-14T17:58:52.698Z,1510682332.698 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T17:58:52.866Z,1510682332.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:52.866Z,1510682332.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T17:58:52.867Z,1510682332.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:52.867Z,1510682332.867 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:52.876Z,1510682332.876 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:53.219Z,1510682333.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:53.219Z,1510682333.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T17:58:53.220Z,1510682333.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:53.221Z,1510682333.221 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:53.222Z,1510682333.222 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:53.568Z,1510682333.568 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2017-11-14T17:58:53.568Z,1510682333.568 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2017-11-14T17:58:53.568Z,1510682333.568 [BuoyancyServo] Communications Fault, FailCount= 1
2017-11-14T17:58:53.568Z,1510682333.568 [BuoyancyServo](ERROR): Communications Fault
2017-11-14T17:58:53.771Z,1510682333.771 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T17:58:53.771Z,1510682333.771 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-14T17:58:53.772Z,1510682333.772 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2017-11-14T17:58:53.821Z,1510682333.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:53.821Z,1510682333.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T17:58:53.822Z,1510682333.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:53.823Z,1510682333.823 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:53.823Z,1510682333.823 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:53.853Z,1510682333.853 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2017-11-14T17:58:53.854Z,1510682333.854 [BuoyancyServo](INFO): Powering down
2017-11-14T17:58:54.148Z,1510682334.148 [Rowe_600LCM](INFO): Initializing
2017-11-14T17:58:54.148Z,1510682334.148 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T17:58:54.149Z,1510682334.149 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T17:58:54.149Z,1510682334.149 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-14T17:58:54.149Z,1510682334.149 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T17:58:54.227Z,1510682334.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:54.227Z,1510682334.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T17:58:54.228Z,1510682334.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:54.229Z,1510682334.229 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:54.230Z,1510682334.230 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:54.255Z,1510682334.255 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T17:58:54.552Z,1510682334.552 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T17:58:54.633Z,1510682334.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:54.633Z,1510682334.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T17:58:54.634Z,1510682334.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:54.635Z,1510682334.635 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:54.636Z,1510682334.636 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:54.826Z,1510682334.826 [Rowe_600LCM](INFO): Powering down
2017-11-14T17:58:55.039Z,1510682335.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:55.039Z,1510682335.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T17:58:55.041Z,1510682335.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:55.056Z,1510682335.056 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:55.057Z,1510682335.057 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:55.536Z,1510682335.536 [Aanderaa_O2](INFO): Powering down
2017-11-14T17:58:55.655Z,1510682335.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:55.655Z,1510682335.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T17:58:55.656Z,1510682335.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:55.657Z,1510682335.657 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:55.658Z,1510682335.658 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-14T17:58:55.877Z,1510682335.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T17:58:55.878Z,1510682335.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:55.984Z,1510682335.984 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2017-11-14T17:58:55.984Z,1510682335.984 [BuoyancyServo] No Fault, FailCount= 1
2017-11-14T17:58:56.281Z,1510682336.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T17:58:56.282Z,1510682336.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:56.305Z,1510682336.305 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-11-14T17:58:56.425Z,1510682336.425 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-11-14T17:58:56.548Z,1510682336.548 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T17:58:56.548Z,1510682336.548 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-14T17:58:56.667Z,1510682336.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-14T17:58:56.676Z,1510682336.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:56.844Z,1510682336.844 [Rowe_600LCM](INFO): Initializing
2017-11-14T17:58:56.845Z,1510682336.845 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T17:58:56.845Z,1510682336.845 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T17:58:56.845Z,1510682336.845 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-14T17:58:56.845Z,1510682336.845 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T17:58:57.017Z,1510682337.017 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T17:58:57.100Z,1510682337.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:57.248Z,1510682337.248 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T17:58:57.488Z,1510682337.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:57.548Z,1510682337.548 [Rowe_600LCM](INFO): Powering down
2017-11-14T17:58:57.916Z,1510682337.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:58.314Z,1510682338.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:58.731Z,1510682338.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:58.801Z,1510682338.801 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T17:58:58.801Z,1510682338.801 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-14T17:58:59.103Z,1510682339.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:59.164Z,1510682339.164 [Rowe_600LCM](INFO): Initializing
2017-11-14T17:58:59.165Z,1510682339.165 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T17:58:59.165Z,1510682339.165 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T17:58:59.165Z,1510682339.165 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-14T17:58:59.165Z,1510682339.165 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T17:58:59.177Z,1510682339.177 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T17:58:59.494Z,1510682339.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:58:59.568Z,1510682339.568 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T17:58:59.794Z,1510682339.794 [Rowe_600LCM](INFO): Powering down
2017-11-14T17:58:59.923Z,1510682339.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:00.342Z,1510682340.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:00.679Z,1510682340.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:01.123Z,1510682341.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:01.176Z,1510682341.176 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T17:59:01.176Z,1510682341.176 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-14T17:59:01.408Z,1510682341.408 [Rowe_600LCM](INFO): Initializing
2017-11-14T17:59:01.409Z,1510682341.409 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T17:59:01.409Z,1510682341.409 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T17:59:01.409Z,1510682341.409 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-14T17:59:01.409Z,1510682341.409 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T17:59:01.486Z,1510682341.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:01.548Z,1510682341.548 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T17:59:01.549Z,1510682341.549 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-14T17:59:01.812Z,1510682341.812 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T17:59:01.935Z,1510682341.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:02.126Z,1510682342.126 [Rowe_600LCM](INFO): Powering down
2017-11-14T17:59:02.294Z,1510682342.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:02.692Z,1510682342.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:03.083Z,1510682343.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:03.538Z,1510682343.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:03.883Z,1510682343.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:04.294Z,1510682344.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:04.722Z,1510682344.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:05.099Z,1510682345.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:05.515Z,1510682345.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:05.925Z,1510682345.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:06.298Z,1510682346.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:06.685Z,1510682346.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:07.114Z,1510682347.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:07.487Z,1510682347.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:07.907Z,1510682347.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:08.360Z,1510682348.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:08.685Z,1510682348.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:09.112Z,1510682349.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:09.520Z,1510682349.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:09.900Z,1510682349.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:10.367Z,1510682350.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:10.729Z,1510682350.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:11.122Z,1510682351.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:11.486Z,1510682351.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:11.901Z,1510682351.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:12.301Z,1510682352.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:12.711Z,1510682352.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:13.095Z,1510682353.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:13.529Z,1510682353.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:13.892Z,1510682353.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:14.288Z,1510682354.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:14.687Z,1510682354.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:15.113Z,1510682355.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:15.485Z,1510682355.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:15.895Z,1510682355.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:16.287Z,1510682356.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:16.667Z,1510682356.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:17.105Z,1510682357.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:17.426Z,1510682357.426 [NAL9602](INFO): Powering up NAL9602
2017-11-14T17:59:17.477Z,1510682357.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:17.871Z,1510682357.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:18.275Z,1510682358.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:18.700Z,1510682358.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:19.101Z,1510682359.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:19.503Z,1510682359.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:19.909Z,1510682359.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:20.307Z,1510682360.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:20.713Z,1510682360.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:21.075Z,1510682361.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:21.475Z,1510682361.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:21.912Z,1510682361.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:22.287Z,1510682362.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:22.658Z,1510682362.658 [PNI_TCM](ERROR): CRC does not match. Expected:0x13183 got:0x6977
2017-11-14T17:59:22.705Z,1510682362.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:23.075Z,1510682363.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:23.502Z,1510682363.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:23.902Z,1510682363.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:24.285Z,1510682364.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:24.704Z,1510682364.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:25.119Z,1510682365.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:25.483Z,1510682365.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:25.873Z,1510682365.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:26.322Z,1510682366.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:26.717Z,1510682366.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:27.117Z,1510682367.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:27.521Z,1510682367.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:27.876Z,1510682367.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:28.324Z,1510682368.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:28.642Z,1510682368.642 [NAL9602](INFO): NAL9602 initialized
2017-11-14T17:59:28.695Z,1510682368.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:29.091Z,1510682369.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:29.492Z,1510682369.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:29.899Z,1510682369.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:30.325Z,1510682370.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:30.347Z,1510682370.347 [SBIT](IMPORTANT): Beginning Startup BIT
2017-11-14T17:59:30.351Z,1510682370.351 [CBIT](IMPORTANT): Beginning ground fault scan
2017-11-14T17:59:30.686Z,1510682370.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:31.084Z,1510682371.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:31.537Z,1510682371.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:31.895Z,1510682371.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:32.295Z,1510682372.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:32.846Z,1510682372.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:33.235Z,1510682373.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:33.637Z,1510682373.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:34.089Z,1510682374.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:34.439Z,1510682374.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:34.871Z,1510682374.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:35.245Z,1510682375.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:35.651Z,1510682375.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:36.027Z,1510682376.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:36.457Z,1510682376.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:36.858Z,1510682376.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:37.261Z,1510682377.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:37.627Z,1510682377.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:38.053Z,1510682378.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:38.452Z,1510682378.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:38.815Z,1510682378.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:39.222Z,1510682379.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:39.619Z,1510682379.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:40.061Z,1510682380.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:40.442Z,1510682380.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:40.840Z,1510682380.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:41.260Z,1510682381.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:41.332Z,1510682381.332 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.024311
CHAN A1 (24V): -0.057945
CHAN A2 (12V): 0.002412
CHAN A3 (5V): -0.023754
CHAN B0 (3.3V): -0.000422
CHAN B1 (3.15aV): -0.001008
CHAN B2 (3.15bV): -0.000712
CHAN B3 (GND): -0.002194
OPEN: 0.003407
Full Scale Calc: 4.765 mA, -1.589 mA
2017-11-14T17:59:41.651Z,1510682381.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:42.043Z,1510682382.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:42.463Z,1510682382.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:42.845Z,1510682382.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:43.248Z,1510682383.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:43.640Z,1510682383.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:44.027Z,1510682384.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:44.427Z,1510682384.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:44.843Z,1510682384.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:45.227Z,1510682385.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:45.631Z,1510682385.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:46.231Z,1510682386.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:46.630Z,1510682386.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:47.035Z,1510682387.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:47.403Z,1510682387.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:47.811Z,1510682387.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:48.211Z,1510682388.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:48.607Z,1510682388.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:49.007Z,1510682389.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:49.406Z,1510682389.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:49.815Z,1510682389.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:50.209Z,1510682390.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:50.619Z,1510682390.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:51.027Z,1510682391.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:51.427Z,1510682391.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:51.827Z,1510682391.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:52.223Z,1510682392.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:52.619Z,1510682392.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:53.008Z,1510682393.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:53.415Z,1510682393.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:53.815Z,1510682393.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:54.211Z,1510682394.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:54.615Z,1510682394.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:55.021Z,1510682395.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:55.435Z,1510682395.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:55.814Z,1510682395.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:56.228Z,1510682396.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:56.674Z,1510682396.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:57.029Z,1510682397.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:57.429Z,1510682397.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:57.864Z,1510682397.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:58.217Z,1510682398.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:58.635Z,1510682398.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:59.019Z,1510682399.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:59.411Z,1510682399.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T17:59:59.815Z,1510682399.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:00.218Z,1510682400.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:00.618Z,1510682400.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:01.019Z,1510682401.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:01.423Z,1510682401.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:01.827Z,1510682401.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:02.223Z,1510682402.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:02.627Z,1510682402.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:03.017Z,1510682403.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:03.419Z,1510682403.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:03.819Z,1510682403.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:04.199Z,1510682404.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:04.621Z,1510682404.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:04.999Z,1510682404.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:05.399Z,1510682405.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:05.803Z,1510682405.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:06.207Z,1510682406.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:06.612Z,1510682406.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:07.051Z,1510682407.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:07.433Z,1510682407.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:07.816Z,1510682407.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:08.215Z,1510682408.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:08.611Z,1510682408.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:09.007Z,1510682409.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:09.411Z,1510682409.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:09.811Z,1510682409.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:10.206Z,1510682410.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:10.611Z,1510682410.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:11.007Z,1510682411.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:11.407Z,1510682411.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:11.818Z,1510682411.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:12.214Z,1510682412.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:12.649Z,1510682412.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:13.196Z,1510682413.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:13.553Z,1510682413.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:13.959Z,1510682413.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:14.350Z,1510682414.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:14.754Z,1510682414.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:15.160Z,1510682415.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:15.554Z,1510682415.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:15.954Z,1510682415.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:16.359Z,1510682416.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:16.767Z,1510682416.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:17.163Z,1510682417.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:17.596Z,1510682417.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:17.967Z,1510682417.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:18.354Z,1510682418.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:18.773Z,1510682418.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:19.155Z,1510682419.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:19.583Z,1510682419.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:19.955Z,1510682419.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:20.400Z,1510682420.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:20.755Z,1510682420.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:21.160Z,1510682421.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:21.554Z,1510682421.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:21.965Z,1510682421.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:22.367Z,1510682422.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:22.765Z,1510682422.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:23.167Z,1510682423.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:23.563Z,1510682423.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:23.960Z,1510682423.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:24.360Z,1510682424.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:24.369Z,1510682424.369 [SBIT](IMPORTANT): SBIT PASSED
2017-11-14T18:00:24.761Z,1510682424.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:24.764Z,1510682424.764 [MissionManager](IMPORTANT): Started mission Startup
2017-11-14T18:00:24.764Z,1510682424.764 [Startup] Running Loop=1
2017-11-14T18:00:24.764Z,1510682424.764 [Startup](DEBUG): Aggregate::initialize Startup
2017-11-14T18:00:24.764Z,1510682424.764 [Startup:A.GoToSurface] Running Loop=1
2017-11-14T18:00:24.764Z,1510682424.764 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-11-14T18:00:24.765Z,1510682424.765 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-11-14T18:00:24.765Z,1510682424.765 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-11-14T18:00:24.766Z,1510682424.766 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-11-14T18:00:24.766Z,1510682424.766 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-11-14T18:00:24.766Z,1510682424.766 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-11-14T18:00:24.772Z,1510682424.772 [Startup:StartupSatComms] Running Loop=1
2017-11-14T18:00:24.772Z,1510682424.772 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2017-11-14T18:00:24.772Z,1510682424.772 [Startup:StartupSatComms:A] Running Loop=1
2017-11-14T18:00:25.156Z,1510682425.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:25.160Z,1510682425.160 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2017-11-14T18:00:25.561Z,1510682425.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:25.961Z,1510682425.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:26.355Z,1510682426.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:26.756Z,1510682426.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:27.171Z,1510682427.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:27.567Z,1510682427.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:27.965Z,1510682427.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:28.371Z,1510682428.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:28.787Z,1510682428.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:29.161Z,1510682429.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:29.557Z,1510682429.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:29.955Z,1510682429.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:30.360Z,1510682430.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:30.762Z,1510682430.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:31.155Z,1510682431.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:31.563Z,1510682431.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:31.961Z,1510682431.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:32.367Z,1510682432.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:32.772Z,1510682432.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:33.171Z,1510682433.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:33.567Z,1510682433.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:33.960Z,1510682433.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:34.361Z,1510682434.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:34.759Z,1510682434.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:35.159Z,1510682435.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:35.560Z,1510682435.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:35.955Z,1510682435.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:36.359Z,1510682436.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:36.769Z,1510682436.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:37.147Z,1510682437.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:37.579Z,1510682437.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:37.972Z,1510682437.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:38.347Z,1510682438.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:38.750Z,1510682438.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:39.155Z,1510682439.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:39.550Z,1510682439.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:40.002Z,1510682440.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:40.353Z,1510682440.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:40.798Z,1510682440.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:41.153Z,1510682441.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:41.591Z,1510682441.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:41.961Z,1510682441.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:42.387Z,1510682442.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:42.749Z,1510682442.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:43.153Z,1510682443.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:43.557Z,1510682443.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:43.953Z,1510682443.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:44.358Z,1510682444.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:44.753Z,1510682444.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:45.153Z,1510682445.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:45.555Z,1510682445.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:45.958Z,1510682445.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:46.359Z,1510682446.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:46.761Z,1510682446.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:47.153Z,1510682447.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:47.555Z,1510682447.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:47.953Z,1510682447.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:48.359Z,1510682448.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:48.753Z,1510682448.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:49.152Z,1510682449.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:49.558Z,1510682449.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:49.955Z,1510682449.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:50.367Z,1510682450.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:50.799Z,1510682450.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:51.159Z,1510682451.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:51.554Z,1510682451.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:51.958Z,1510682451.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:52.354Z,1510682452.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:52.753Z,1510682452.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:53.158Z,1510682453.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:53.559Z,1510682453.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:53.953Z,1510682453.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:54.358Z,1510682454.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:54.771Z,1510682454.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:55.163Z,1510682455.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:55.575Z,1510682455.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:55.958Z,1510682455.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:56.350Z,1510682456.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:56.750Z,1510682456.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:57.159Z,1510682457.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:57.554Z,1510682457.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:57.954Z,1510682457.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:58.359Z,1510682458.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:58.767Z,1510682458.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:59.163Z,1510682459.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:59.563Z,1510682459.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:00:59.963Z,1510682459.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:00.355Z,1510682460.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:00.764Z,1510682460.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:01.155Z,1510682461.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:01.575Z,1510682461.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:01.963Z,1510682461.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:02.375Z,1510682462.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:02.754Z,1510682462.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:03.175Z,1510682463.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:03.567Z,1510682463.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:03.960Z,1510682463.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:04.371Z,1510682464.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:04.762Z,1510682464.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:05.155Z,1510682465.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:05.556Z,1510682465.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:05.954Z,1510682465.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:06.355Z,1510682466.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:06.760Z,1510682466.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:07.153Z,1510682467.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:07.555Z,1510682467.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:07.956Z,1510682467.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:08.359Z,1510682468.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:08.765Z,1510682468.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:09.171Z,1510682469.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:09.564Z,1510682469.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:09.963Z,1510682469.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:10.356Z,1510682470.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:10.756Z,1510682470.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:11.160Z,1510682471.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:11.575Z,1510682471.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:11.963Z,1510682471.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:12.359Z,1510682472.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:12.758Z,1510682472.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:13.157Z,1510682473.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:13.560Z,1510682473.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:13.971Z,1510682473.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:14.368Z,1510682474.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:14.805Z,1510682474.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:15.171Z,1510682475.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:15.561Z,1510682475.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:18.663Z,1510682478.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:18.773Z,1510682478.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:19.159Z,1510682479.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:19.494Z,1510682479.494 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003715
2017-11-14T18:01:19.559Z,1510682479.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:19.955Z,1510682479.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:20.354Z,1510682480.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:20.735Z,1510682480.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:21.127Z,1510682481.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:21.531Z,1510682481.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:21.977Z,1510682481.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:22.327Z,1510682482.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:22.730Z,1510682482.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:23.131Z,1510682483.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:23.530Z,1510682483.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:23.931Z,1510682483.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:24.336Z,1510682484.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:24.739Z,1510682484.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:25.131Z,1510682485.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:25.134Z,1510682485.134 [Startup:StartupSatComms:A](INFO): Timed out from 2017-11-14T18:00:24.8Z
2017-11-14T18:01:25.134Z,1510682485.134 [Startup:StartupSatComms:A] Stopped
2017-11-14T18:01:25.134Z,1510682485.134 [Startup:StartupSatComms:B] Running Loop=1
2017-11-14T18:01:25.528Z,1510682485.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:25.531Z,1510682485.531 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-11-14T18:01:25.970Z,1510682485.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:26.334Z,1510682486.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:29.432Z,1510682489.432 [BPC1](ERROR): Failed to receive battery data
2017-11-14T18:01:29.432Z,1510682489.432 [BPC1] Communications Fault, FailCount= 1
2017-11-14T18:01:29.432Z,1510682489.432 [BPC1](ERROR): Communications Fault
2017-11-14T18:01:29.476Z,1510682489.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:29.502Z,1510682489.502 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-14T18:01:29.517Z,1510682489.517 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171114T171802/Courier0020.lzma
2017-11-14T18:01:29.582Z,1510682489.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:29.973Z,1510682489.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:30.313Z,1510682490.313 [DataOverHttps](INFO): Moved sent file to Logs/20171114T171802/Courier0020.lzma.bak
2017-11-14T18:01:30.313Z,1510682490.313 [DataOverHttps](INFO): SBD MOMSN=5235913
2017-11-14T18:01:30.351Z,1510682490.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:30.400Z,1510682490.400 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-14T18:01:30.400Z,1510682490.400 [BPC1] No Fault, FailCount= 1
2017-11-14T18:01:30.819Z,1510682490.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:31.155Z,1510682491.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:34.234Z,1510682494.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:34.341Z,1510682494.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:34.713Z,1510682494.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:35.121Z,1510682495.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:35.530Z,1510682495.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:35.903Z,1510682495.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:39.006Z,1510682499.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:39.061Z,1510682499.061 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20171114T175840/Courier0000.lzma
2017-11-14T18:01:39.143Z,1510682499.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:39.531Z,1510682499.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:39.852Z,1510682499.852 [DataOverHttps](INFO): Moved sent file to Logs/20171114T175840/Courier0000.lzma.bak
2017-11-14T18:01:39.853Z,1510682499.853 [DataOverHttps](INFO): SBD MOMSN=5235915
2017-11-14T18:01:39.919Z,1510682499.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:40.384Z,1510682500.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:40.697Z,1510682500.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:43.791Z,1510682503.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:43.910Z,1510682503.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:44.290Z,1510682504.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:44.669Z,1510682504.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:45.061Z,1510682505.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:45.459Z,1510682505.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:48.590Z,1510682508.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:48.642Z,1510682508.642 [DataOverHttps](INFO): Sending 213 bytes from file Logs/20171114T171802/Express0021.lzma
2017-11-14T18:01:48.715Z,1510682508.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:49.098Z,1510682509.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:49.433Z,1510682509.433 [DataOverHttps](INFO): Moved sent file to Logs/20171114T171802/Express0021.lzma.bak
2017-11-14T18:01:49.433Z,1510682509.433 [DataOverHttps](INFO): SBD MOMSN=5235919
2017-11-14T18:01:49.511Z,1510682509.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:49.923Z,1510682509.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:50.277Z,1510682510.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:53.409Z,1510682513.409 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:53.409Z,1510682513.409 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-11-14T18:01:53.409Z,1510682513.409 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-14T18:01:53.411Z,1510682513.411 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:53.411Z,1510682513.411 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2017-11-14T18:01:53.411Z,1510682513.411 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-14T18:01:53.413Z,1510682513.413 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:53.413Z,1510682513.413 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-11-14T18:01:53.413Z,1510682513.413 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T18:01:53.435Z,1510682513.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-14T18:01:53.435Z,1510682513.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-14T18:01:53.435Z,1510682513.435 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T18:01:53.582Z,1510682513.582 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-14T18:01:53.582Z,1510682513.582 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-11-14T18:01:53.583Z,1510682513.583 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-14T18:01:53.583Z,1510682513.583 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2017-11-14T18:01:53.583Z,1510682513.583 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T18:01:53.583Z,1510682513.583 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-11-14T18:01:53.942Z,1510682513.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-14T18:01:53.942Z,1510682513.942 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:01:53.943Z,1510682513.943 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:01:53.943Z,1510682513.943 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-14T18:01:53.943Z,1510682513.943 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:01:53.944Z,1510682513.944 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:01:53.944Z,1510682513.944 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T18:01:53.945Z,1510682513.945 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:01:53.945Z,1510682513.945 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:01:54.307Z,1510682514.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-11-14T18:01:54.308Z,1510682514.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:54.730Z,1510682514.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2017-11-14T18:01:54.731Z,1510682514.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:55.101Z,1510682515.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2017-11-14T18:01:55.102Z,1510682515.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:58.187Z,1510682518.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-11-14T18:01:58.188Z,1510682518.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:58.210Z,1510682518.210 [DataOverHttps](INFO): Sending 702 bytes from file Logs/20171114T175840/Express0001.lzma
2017-11-14T18:01:58.331Z,1510682518.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-14T18:01:58.332Z,1510682518.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:58.680Z,1510682518.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-11-14T18:01:58.681Z,1510682518.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:59.015Z,1510682519.015 [DataOverHttps](INFO): Moved sent file to Logs/20171114T175840/Express0001.lzma.bak
2017-11-14T18:01:59.015Z,1510682519.015 [DataOverHttps](INFO): SBD MOMSN=5235926
2017-11-14T18:01:59.057Z,1510682519.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-11-14T18:01:59.058Z,1510682519.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:59.462Z,1510682519.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-11-14T18:01:59.463Z,1510682519.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:59.466Z,1510682519.466 [Startup:StartupSatComms:B] Stopped
2017-11-14T18:01:59.466Z,1510682519.466 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2017-11-14T18:01:59.466Z,1510682519.466 [Startup:StartupSatComms] Stopped
2017-11-14T18:01:59.466Z,1510682519.466 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2017-11-14T18:01:59.467Z,1510682519.467 [Startup](INFO): Completed Startup
2017-11-14T18:01:59.467Z,1510682519.467 [MissionManager](INFO): Startup is completed.
2017-11-14T18:01:59.467Z,1510682519.467 [MissionManager](INFO): Uninitializing Mission Startup
2017-11-14T18:01:59.467Z,1510682519.467 [Startup] Stopped
2017-11-14T18:01:59.467Z,1510682519.467 [Startup](DEBUG): Aggregate::uninitialize Startup
2017-11-14T18:01:59.468Z,1510682519.468 [Startup:A.GoToSurface] Stopped
2017-11-14T18:01:59.468Z,1510682519.468 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-11-14T18:01:59.859Z,1510682519.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-11-14T18:01:59.860Z,1510682519.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:01:59.863Z,1510682519.863 [MissionManager](IMPORTANT): Started mission Default
2017-11-14T18:01:59.863Z,1510682519.863 [Default] Running Loop=1
2017-11-14T18:01:59.863Z,1510682519.863 [Default](DEBUG): Aggregate::initialize Default
2017-11-14T18:01:59.863Z,1510682519.863 [Default:B.GoToSurface] Running Loop=1
2017-11-14T18:01:59.863Z,1510682519.863 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-11-14T18:01:59.864Z,1510682519.864 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-11-14T18:01:59.864Z,1510682519.864 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-11-14T18:01:59.865Z,1510682519.865 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-11-14T18:01:59.865Z,1510682519.865 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-11-14T18:01:59.865Z,1510682519.865 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-11-14T18:01:59.865Z,1510682519.865 [Default:A.Wait] Running Loop=1
2017-11-14T18:01:59.865Z,1510682519.865 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-11-14T18:02:02.969Z,1510682522.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-11-14T18:02:02.970Z,1510682522.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:03.098Z,1510682523.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-11-14T18:02:03.099Z,1510682523.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:03.491Z,1510682523.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-11-14T18:02:03.492Z,1510682523.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:03.867Z,1510682523.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-11-14T18:02:03.868Z,1510682523.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:04.263Z,1510682524.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-11-14T18:02:04.264Z,1510682524.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:04.661Z,1510682524.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-11-14T18:02:04.662Z,1510682524.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:05.089Z,1510682525.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2017-11-14T18:02:05.090Z,1510682525.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:05.458Z,1510682525.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-11-14T18:02:05.459Z,1510682525.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:05.862Z,1510682525.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-11-14T18:02:05.863Z,1510682525.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:06.259Z,1510682526.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-11-14T18:02:06.260Z,1510682526.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:06.674Z,1510682526.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-14T18:02:06.675Z,1510682526.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:07.062Z,1510682527.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-14T18:02:07.063Z,1510682527.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:07.459Z,1510682527.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-14T18:02:07.460Z,1510682527.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:07.859Z,1510682527.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-14T18:02:07.861Z,1510682527.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:08.273Z,1510682528.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-14T18:02:08.274Z,1510682528.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:08.659Z,1510682528.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-11-14T18:02:08.661Z,1510682528.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:09.060Z,1510682529.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-11-14T18:02:09.061Z,1510682529.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:09.466Z,1510682529.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2017-11-14T18:02:09.467Z,1510682529.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:09.888Z,1510682529.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-11-14T18:02:09.889Z,1510682529.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:10.259Z,1510682530.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-11-14T18:02:10.260Z,1510682530.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:10.662Z,1510682530.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2017-11-14T18:02:10.663Z,1510682530.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:11.062Z,1510682531.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2017-11-14T18:02:11.063Z,1510682531.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:11.473Z,1510682531.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-14T18:02:11.474Z,1510682531.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:11.863Z,1510682531.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-14T18:02:11.864Z,1510682531.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:12.260Z,1510682532.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-14T18:02:12.261Z,1510682532.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:12.659Z,1510682532.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2017-11-14T18:02:12.661Z,1510682532.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:13.090Z,1510682533.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2017-11-14T18:02:13.091Z,1510682533.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:13.095Z,1510682533.095 [Default:A.Wait](INFO): Done Waiting.
2017-11-14T18:02:13.095Z,1510682533.095 [Default:A.Wait] Stopped
2017-11-14T18:02:13.095Z,1510682533.095 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-11-14T18:02:13.473Z,1510682533.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:13.484Z,1510682533.484 [Default:CheckIn] Running Loop=1
2017-11-14T18:02:13.484Z,1510682533.484 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-14T18:02:13.485Z,1510682533.485 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-14T18:02:13.901Z,1510682533.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:13.908Z,1510682533.908 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2017-11-14T18:02:14.261Z,1510682534.261 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-14T18:02:14.261Z,1510682534.261 [BPC1] Data Fault, FailCount= 1
2017-11-14T18:02:14.261Z,1510682534.261 [BPC1](ERROR): Data Fault
2017-11-14T18:02:14.270Z,1510682534.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:14.316Z,1510682534.316 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-14T18:02:14.673Z,1510682534.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:15.058Z,1510682535.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:15.468Z,1510682535.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:15.481Z,1510682535.481 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-14T18:02:15.481Z,1510682535.481 [BPC1] No Fault, FailCount= 1
2017-11-14T18:02:15.913Z,1510682535.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:16.274Z,1510682536.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:16.668Z,1510682536.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:17.063Z,1510682537.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:17.460Z,1510682537.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:17.874Z,1510682537.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:18.279Z,1510682538.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:18.679Z,1510682538.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:19.067Z,1510682539.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:19.479Z,1510682539.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:19.865Z,1510682539.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:20.263Z,1510682540.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:20.671Z,1510682540.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:21.077Z,1510682541.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:21.465Z,1510682541.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:21.869Z,1510682541.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:22.262Z,1510682542.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:22.698Z,1510682542.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:23.079Z,1510682543.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:23.475Z,1510682543.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:23.843Z,1510682543.843 [PNI_TCM](ERROR): CRC does not match. Expected:0x57570 got:0x52079
2017-11-14T18:02:23.873Z,1510682543.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:24.294Z,1510682544.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:24.660Z,1510682544.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:25.075Z,1510682545.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:25.471Z,1510682545.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:25.877Z,1510682545.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:26.268Z,1510682546.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:26.673Z,1510682546.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:27.070Z,1510682547.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:27.476Z,1510682547.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:27.863Z,1510682547.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:28.262Z,1510682548.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:28.661Z,1510682548.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:29.063Z,1510682549.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:29.463Z,1510682549.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:29.867Z,1510682549.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:30.263Z,1510682550.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:30.677Z,1510682550.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:31.060Z,1510682551.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:31.464Z,1510682551.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:31.866Z,1510682551.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:32.278Z,1510682552.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:32.665Z,1510682552.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:33.061Z,1510682553.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:33.462Z,1510682553.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:33.869Z,1510682553.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:34.260Z,1510682554.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:34.660Z,1510682554.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:35.080Z,1510682555.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:35.474Z,1510682555.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:35.875Z,1510682555.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:36.285Z,1510682556.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:36.661Z,1510682556.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:37.068Z,1510682557.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:37.491Z,1510682557.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:37.871Z,1510682557.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:38.303Z,1510682558.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:38.671Z,1510682558.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:39.060Z,1510682559.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:39.467Z,1510682559.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:39.873Z,1510682559.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:40.287Z,1510682560.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:40.667Z,1510682560.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:41.066Z,1510682561.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:41.460Z,1510682561.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:41.868Z,1510682561.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:42.266Z,1510682562.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:42.661Z,1510682562.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:43.067Z,1510682563.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:43.465Z,1510682563.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:43.863Z,1510682563.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:44.279Z,1510682564.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:44.683Z,1510682564.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:45.082Z,1510682565.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:45.465Z,1510682565.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:45.470Z,1510682565.470 [CommandLine](IMPORTANT): got command configSet list
2017-11-14T18:02:45.470Z,1510682565.470 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2017-11-14T18:02:45.471Z,1510682565.471 [CommandLine](IMPORTANT): CBIT.abortDepth=305 meter;

2017-11-14T18:02:45.471Z,1510682565.471 [CommandLine](IMPORTANT): CBIT.stopDepth=301 meter;

2017-11-14T18:02:45.471Z,1510682565.471 [CommandLine](IMPORTANT): ESPComponent.loadAtStartup=1 bool;

2017-11-14T18:02:45.471Z,1510682565.471 [CommandLine](IMPORTANT): ESPComponent.simulateHardware=1 bool;

2017-11-14T18:02:45.471Z,1510682565.471 [CommandLine](IMPORTANT): Normal all WetLabsBB2FL.mass_concentration_of_chlorophyll_in_sea_water;

2017-11-14T18:02:45.472Z,1510682565.472 [CommandLine](IMPORTANT): Normal all mass_concentration_of_chlorophyll_in_sea_water;

2017-11-14T18:02:45.472Z,1510682565.472 [CommandLine](IMPORTANT): Normal all sea_water_temperature;

2017-11-14T18:02:45.472Z,1510682565.472 [CommandLine](IMPORTANT): RudderServo.offsetAngle=0 degree;

2017-11-14T18:02:45.472Z,1510682565.472 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=250 cubic_centimeter;

2017-11-14T18:02:45.472Z,1510682565.472 [CommandLine](IMPORTANT): VerticalControl.massDefault=-0.5 centimeter;

2017-11-14T18:02:45.871Z,1510682565.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:46.269Z,1510682566.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:46.691Z,1510682566.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:47.076Z,1510682567.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:47.455Z,1510682567.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:47.859Z,1510682567.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:48.288Z,1510682568.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:48.684Z,1510682568.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:49.084Z,1510682569.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:49.484Z,1510682569.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:49.882Z,1510682569.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:50.260Z,1510682570.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:50.662Z,1510682570.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:51.060Z,1510682571.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:51.486Z,1510682571.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:51.861Z,1510682571.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:52.261Z,1510682572.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:52.663Z,1510682572.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:53.091Z,1510682573.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:53.480Z,1510682573.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:53.867Z,1510682573.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:54.294Z,1510682574.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:54.686Z,1510682574.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:55.058Z,1510682575.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:55.468Z,1510682575.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:55.862Z,1510682575.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:56.289Z,1510682576.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:56.668Z,1510682576.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:57.062Z,1510682577.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:57.504Z,1510682577.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:57.894Z,1510682577.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:58.266Z,1510682578.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:58.716Z,1510682578.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:59.068Z,1510682579.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:59.490Z,1510682579.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:02:59.892Z,1510682579.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:00.265Z,1510682580.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:03.399Z,1510682583.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:03.545Z,1510682583.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:03.867Z,1510682583.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:04.291Z,1510682584.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:04.665Z,1510682584.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:05.067Z,1510682585.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:05.462Z,1510682585.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:05.890Z,1510682585.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:06.263Z,1510682586.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:06.675Z,1510682586.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:07.071Z,1510682587.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:07.493Z,1510682587.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:07.873Z,1510682587.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:08.263Z,1510682588.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:08.664Z,1510682588.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:09.077Z,1510682589.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:09.468Z,1510682589.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:09.866Z,1510682589.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:10.264Z,1510682590.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:10.674Z,1510682590.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:11.067Z,1510682591.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:11.503Z,1510682591.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:11.875Z,1510682591.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:12.297Z,1510682592.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:12.665Z,1510682592.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:13.067Z,1510682593.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:13.471Z,1510682593.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:13.879Z,1510682593.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:14.266Z,1510682594.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:14.671Z,1510682594.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:15.063Z,1510682595.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:15.496Z,1510682595.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:15.879Z,1510682595.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:16.263Z,1510682596.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:16.674Z,1510682596.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:17.079Z,1510682597.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:17.520Z,1510682597.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:17.867Z,1510682597.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:18.262Z,1510682598.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:18.679Z,1510682598.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:19.066Z,1510682599.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:19.464Z,1510682599.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:19.863Z,1510682599.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:20.279Z,1510682600.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:20.668Z,1510682600.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:21.067Z,1510682601.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:21.467Z,1510682601.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:21.878Z,1510682601.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:22.267Z,1510682602.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:22.663Z,1510682602.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:23.065Z,1510682603.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:23.511Z,1510682603.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:23.883Z,1510682603.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:24.307Z,1510682604.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:24.667Z,1510682604.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:25.102Z,1510682605.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:25.468Z,1510682605.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:25.868Z,1510682605.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:26.272Z,1510682606.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:26.675Z,1510682606.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:27.069Z,1510682607.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:27.469Z,1510682607.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:27.871Z,1510682607.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:28.297Z,1510682608.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:28.666Z,1510682608.666 [PNI_TCM](ERROR): CRC does not match. Expected:0x42664 got:0x10497
2017-11-14T18:03:28.706Z,1510682608.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:29.064Z,1510682609.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:29.468Z,1510682609.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:29.883Z,1510682609.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:30.265Z,1510682610.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:30.665Z,1510682610.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:31.067Z,1510682611.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:31.479Z,1510682611.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:31.867Z,1510682611.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:32.268Z,1510682612.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:32.676Z,1510682612.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:33.096Z,1510682613.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:33.507Z,1510682613.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:33.883Z,1510682613.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:34.267Z,1510682614.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:34.683Z,1510682614.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:35.072Z,1510682615.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:35.473Z,1510682615.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:35.868Z,1510682615.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:36.279Z,1510682616.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:36.668Z,1510682616.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:37.068Z,1510682617.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:37.449Z,1510682617.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:37.465Z,1510682617.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:37.857Z,1510682617.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:37.897Z,1510682617.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:38.260Z,1510682618.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:38.267Z,1510682618.267 [PNI_TCM](ERROR): CRC does not match. Expected:0x1081 got:0x16937
2017-11-14T18:03:38.306Z,1510682618.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:38.648Z,1510682618.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:38.665Z,1510682618.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:39.043Z,1510682619.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:39.075Z,1510682619.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:39.448Z,1510682619.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:39.483Z,1510682619.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:39.845Z,1510682619.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:39.865Z,1510682619.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:40.246Z,1510682620.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:40.347Z,1510682620.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:40.649Z,1510682620.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:40.678Z,1510682620.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:41.061Z,1510682621.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:41.107Z,1510682621.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:41.459Z,1510682621.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:41.468Z,1510682621.468 [PNI_TCM](ERROR): CRC does not match. Expected:0x10690 got:0x16843
2017-11-14T18:03:41.515Z,1510682621.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:41.861Z,1510682621.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:41.878Z,1510682621.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:42.260Z,1510682622.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:42.277Z,1510682622.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:42.639Z,1510682622.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:42.680Z,1510682622.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:43.049Z,1510682623.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:43.069Z,1510682623.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:43.439Z,1510682623.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:43.475Z,1510682623.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:43.840Z,1510682623.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:43.867Z,1510682623.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:44.239Z,1510682624.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:44.279Z,1510682624.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:44.650Z,1510682624.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:44.669Z,1510682624.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:45.055Z,1510682625.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:45.124Z,1510682625.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:45.441Z,1510682625.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:45.506Z,1510682625.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:45.839Z,1510682625.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:45.876Z,1510682625.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:46.263Z,1510682626.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:46.323Z,1510682626.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:46.655Z,1510682626.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:46.678Z,1510682626.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:47.061Z,1510682627.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:47.112Z,1510682627.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:47.458Z,1510682627.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:47.495Z,1510682627.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:47.838Z,1510682627.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:47.871Z,1510682627.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:48.239Z,1510682628.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:48.275Z,1510682628.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:48.640Z,1510682628.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:48.674Z,1510682628.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:49.038Z,1510682629.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:49.070Z,1510682629.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:49.442Z,1510682629.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:49.471Z,1510682629.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:49.839Z,1510682629.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:49.874Z,1510682629.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:50.239Z,1510682630.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:50.273Z,1510682630.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:50.639Z,1510682630.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:50.673Z,1510682630.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:51.058Z,1510682631.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:51.076Z,1510682631.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:51.454Z,1510682631.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:51.476Z,1510682631.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:51.840Z,1510682631.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:51.875Z,1510682631.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:52.239Z,1510682632.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:52.274Z,1510682632.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:52.638Z,1510682632.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:52.675Z,1510682632.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:53.039Z,1510682633.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:53.073Z,1510682633.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:53.440Z,1510682633.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:53.473Z,1510682633.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:53.838Z,1510682633.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:53.877Z,1510682633.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:54.263Z,1510682634.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:54.279Z,1510682634.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:54.657Z,1510682634.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:54.680Z,1510682634.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:55.040Z,1510682635.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:55.073Z,1510682635.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:55.439Z,1510682635.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:55.515Z,1510682635.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:55.839Z,1510682635.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:55.878Z,1510682635.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:56.238Z,1510682636.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:56.277Z,1510682636.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:56.640Z,1510682636.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:56.677Z,1510682636.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:57.039Z,1510682637.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:57.082Z,1510682637.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:57.443Z,1510682637.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:57.476Z,1510682637.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:57.839Z,1510682637.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:57.883Z,1510682637.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:58.240Z,1510682638.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:58.257Z,1510682638.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:58.643Z,1510682638.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:58.690Z,1510682638.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:59.043Z,1510682639.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:59.062Z,1510682639.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:59.439Z,1510682639.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:59.459Z,1510682639.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:03:59.852Z,1510682639.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:03:59.881Z,1510682639.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:00.246Z,1510682640.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:00.285Z,1510682640.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:03.345Z,1510682643.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:03.362Z,1510682643.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:03.478Z,1510682643.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:03.495Z,1510682643.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:03.835Z,1510682643.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:03.871Z,1510682643.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:04.204Z,1510682644.204 [DataOverHttps](IMPORTANT): SBD MTMSN=20171114T180403
2017-11-14T18:04:04.241Z,1510682644.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:04.266Z,1510682644.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:04.638Z,1510682644.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:04.663Z,1510682644.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:05.031Z,1510682645.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:05.085Z,1510682645.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:08.219Z,1510682648.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:08.261Z,1510682648.261 [DataOverHttps](INFO): Received command:configSet CBIT.gf24Offset 107 ua persist
2017-11-14T18:04:08.390Z,1510682648.390 [CommandLine](IMPORTANT): got command configSet CBIT.gf24Offset 107.000000 microampere persist
2017-11-14T18:04:08.457Z,1510682648.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:08.701Z,1510682648.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:09.075Z,1510682649.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:09.103Z,1510682649.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:09.471Z,1510682649.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:09.540Z,1510682649.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:09.872Z,1510682649.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:09.898Z,1510682649.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:10.272Z,1510682650.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:10.320Z,1510682650.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:10.683Z,1510682650.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:10.705Z,1510682650.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:11.070Z,1510682651.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:11.095Z,1510682651.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:11.492Z,1510682651.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:11.509Z,1510682651.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:11.889Z,1510682651.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:11.909Z,1510682651.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:12.284Z,1510682652.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:12.301Z,1510682652.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:12.670Z,1510682652.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:12.696Z,1510682652.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:13.075Z,1510682653.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:13.103Z,1510682653.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:13.472Z,1510682653.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:13.505Z,1510682653.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:13.874Z,1510682653.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:13.900Z,1510682653.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:14.275Z,1510682654.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:14.303Z,1510682654.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:14.672Z,1510682654.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:14.697Z,1510682654.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:15.072Z,1510682655.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:15.105Z,1510682655.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:15.489Z,1510682655.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:15.506Z,1510682655.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:15.891Z,1510682655.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:15.907Z,1510682655.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:16.291Z,1510682656.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:16.315Z,1510682656.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:16.683Z,1510682656.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:16.700Z,1510682656.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:17.082Z,1510682657.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:17.103Z,1510682657.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:17.470Z,1510682657.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:17.503Z,1510682657.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:17.884Z,1510682657.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:17.901Z,1510682657.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:18.272Z,1510682658.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:18.301Z,1510682658.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:18.674Z,1510682658.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:18.735Z,1510682658.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:19.075Z,1510682659.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:19.101Z,1510682659.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:19.483Z,1510682659.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:19.502Z,1510682659.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:19.874Z,1510682659.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:19.908Z,1510682659.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:20.275Z,1510682660.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:20.311Z,1510682660.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:20.675Z,1510682660.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:20.709Z,1510682660.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:21.073Z,1510682661.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:21.106Z,1510682661.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:21.473Z,1510682661.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:21.507Z,1510682661.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:21.874Z,1510682661.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:21.910Z,1510682661.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:22.270Z,1510682662.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:22.307Z,1510682662.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:22.672Z,1510682662.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:22.702Z,1510682662.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:23.072Z,1510682663.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:23.106Z,1510682663.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:23.474Z,1510682663.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:23.504Z,1510682663.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:23.870Z,1510682663.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:23.906Z,1510682663.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:24.288Z,1510682664.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:24.317Z,1510682664.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:24.690Z,1510682664.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:24.711Z,1510682664.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:25.075Z,1510682665.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:25.101Z,1510682665.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:25.471Z,1510682665.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:25.505Z,1510682665.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:25.873Z,1510682665.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:25.899Z,1510682665.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:26.274Z,1510682666.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:26.305Z,1510682666.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:26.679Z,1510682666.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:26.711Z,1510682666.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:27.071Z,1510682667.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:27.106Z,1510682667.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:27.472Z,1510682667.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:27.506Z,1510682667.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:27.873Z,1510682667.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:27.901Z,1510682667.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:28.275Z,1510682668.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:28.310Z,1510682668.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:28.690Z,1510682668.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:28.708Z,1510682668.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:29.085Z,1510682669.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:29.117Z,1510682669.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:29.476Z,1510682669.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:29.504Z,1510682669.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:29.875Z,1510682669.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:29.905Z,1510682669.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:30.270Z,1510682670.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:30.305Z,1510682670.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:30.672Z,1510682670.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:30.741Z,1510682670.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:31.073Z,1510682671.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:31.130Z,1510682671.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:31.474Z,1510682671.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:31.509Z,1510682671.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:31.854Z,1510682671.854 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-14T18:04:31.871Z,1510682671.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:31.923Z,1510682671.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:32.273Z,1510682672.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:32.307Z,1510682672.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:32.695Z,1510682672.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:32.753Z,1510682672.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:33.096Z,1510682673.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:33.119Z,1510682673.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:33.485Z,1510682673.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:33.511Z,1510682673.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:33.872Z,1510682673.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:33.902Z,1510682673.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:34.276Z,1510682674.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:34.315Z,1510682674.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:34.675Z,1510682674.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:34.691Z,1510682674.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:35.070Z,1510682675.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:35.091Z,1510682675.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:35.489Z,1510682675.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:35.514Z,1510682675.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:35.864Z,1510682675.864 [NAL9602](INFO): GPS fix at 20171114T180434: (36.802663, -121.788036)
2017-11-14T18:04:35.881Z,1510682675.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:35.938Z,1510682675.938 [Default:CheckIn:Read_GPS] Stopped
2017-11-14T18:04:35.938Z,1510682675.938 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-14T18:04:36.289Z,1510682676.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:36.326Z,1510682676.326 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-11-14T18:04:36.848Z,1510682676.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:37.078Z,1510682677.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:42.125Z,1510682682.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:42.243Z,1510682682.243 [DataOverHttps](INFO): Sending 213 bytes from file Logs/20171114T175840/Courier0004.lzma
2017-11-14T18:04:42.288Z,1510682682.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:42.660Z,1510682682.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:43.038Z,1510682683.038 [DataOverHttps](INFO): Moved sent file to Logs/20171114T175840/Courier0004.lzma.bak
2017-11-14T18:04:43.038Z,1510682683.038 [DataOverHttps](INFO): SBD MOMSN=5235946
2017-11-14T18:04:43.062Z,1510682683.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:43.463Z,1510682683.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:43.860Z,1510682683.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:47.140Z,1510682687.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:47.246Z,1510682687.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:47.639Z,1510682687.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:48.039Z,1510682688.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:48.440Z,1510682688.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:48.834Z,1510682688.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:52.378Z,1510682692.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:52.453Z,1510682692.453 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20171114T175840/Courier0008.lzma
2017-11-14T18:04:52.503Z,1510682692.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:52.893Z,1510682692.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:53.253Z,1510682693.253 [DataOverHttps](INFO): Moved sent file to Logs/20171114T175840/Courier0008.lzma.bak
2017-11-14T18:04:53.253Z,1510682693.253 [DataOverHttps](INFO): SBD MOMSN=5235949
2017-11-14T18:04:53.292Z,1510682693.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:53.687Z,1510682693.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:54.074Z,1510682694.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:54.148Z,1510682694.148 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:04:54.148Z,1510682694.148 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-11-14T18:04:54.148Z,1510682694.148 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T18:04:54.161Z,1510682694.161 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T18:04:57.270Z,1510682697.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:57.308Z,1510682697.308 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T18:04:57.308Z,1510682697.308 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-11-14T18:04:57.404Z,1510682697.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:57.462Z,1510682697.462 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T18:04:57.463Z,1510682697.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:04:57.463Z,1510682697.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:04:57.744Z,1510682697.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:58.144Z,1510682698.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:58.538Z,1510682698.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:04:58.938Z,1510682698.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:02.084Z,1510682702.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:02.143Z,1510682702.143 [DataOverHttps](INFO): Sending 687 bytes from file Logs/20171114T175840/Express0005.lzma
2017-11-14T18:05:02.207Z,1510682702.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:02.565Z,1510682702.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:02.940Z,1510682702.940 [DataOverHttps](INFO): Moved sent file to Logs/20171114T175840/Express0005.lzma.bak
2017-11-14T18:05:02.941Z,1510682702.941 [DataOverHttps](INFO): SBD MOMSN=5235951
2017-11-14T18:05:02.983Z,1510682702.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:03.381Z,1510682703.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:03.768Z,1510682703.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:07.112Z,1510682707.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:07.253Z,1510682707.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:07.624Z,1510682707.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:08.023Z,1510682708.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:08.424Z,1510682708.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:08.826Z,1510682708.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:12.043Z,1510682712.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:12.102Z,1510682712.102 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20171114T175840/Express0009.lzma
2017-11-14T18:05:12.157Z,1510682712.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:12.509Z,1510682712.509 [NAL9602](INFO): Powering down
2017-11-14T18:05:12.532Z,1510682712.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:12.900Z,1510682712.900 [DataOverHttps](INFO): Moved sent file to Logs/20171114T175840/Express0009.lzma.bak
2017-11-14T18:05:12.901Z,1510682712.901 [DataOverHttps](INFO): SBD MOMSN=5235969
2017-11-14T18:05:12.936Z,1510682712.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:13.338Z,1510682713.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:13.361Z,1510682713.361 [Default:CheckIn:Read_Iridium] Stopped
2017-11-14T18:05:13.361Z,1510682713.361 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-14T18:05:13.361Z,1510682713.361 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-14T18:05:13.730Z,1510682713.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:16.842Z,1510682716.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:16.950Z,1510682716.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:17.336Z,1510682717.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:17.739Z,1510682717.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:18.136Z,1510682718.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:18.533Z,1510682718.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:18.936Z,1510682718.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:19.330Z,1510682719.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:19.730Z,1510682719.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:20.130Z,1510682720.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:20.529Z,1510682720.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:20.930Z,1510682720.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:21.330Z,1510682721.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:21.730Z,1510682721.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:22.130Z,1510682722.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:22.530Z,1510682722.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:22.931Z,1510682722.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:23.335Z,1510682723.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:23.730Z,1510682723.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:24.131Z,1510682724.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:24.530Z,1510682724.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:24.930Z,1510682724.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:25.334Z,1510682725.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:25.737Z,1510682725.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:26.137Z,1510682726.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:26.536Z,1510682726.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:26.941Z,1510682726.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:27.336Z,1510682727.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:27.734Z,1510682727.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:28.139Z,1510682728.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:28.535Z,1510682728.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:28.934Z,1510682728.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:29.335Z,1510682729.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:29.735Z,1510682729.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:30.135Z,1510682730.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:30.535Z,1510682730.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:30.939Z,1510682730.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:31.340Z,1510682731.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:31.736Z,1510682731.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:32.139Z,1510682732.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:32.536Z,1510682732.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:32.936Z,1510682732.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:33.335Z,1510682733.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:33.733Z,1510682733.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:34.136Z,1510682734.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:34.536Z,1510682734.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:34.936Z,1510682734.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:35.336Z,1510682735.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:35.736Z,1510682735.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:36.136Z,1510682736.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:36.534Z,1510682736.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:36.936Z,1510682736.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:37.334Z,1510682737.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:37.736Z,1510682737.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:38.135Z,1510682738.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:38.532Z,1510682738.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:38.935Z,1510682738.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:39.340Z,1510682739.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:39.735Z,1510682739.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:40.133Z,1510682740.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:40.539Z,1510682740.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:40.935Z,1510682740.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:41.335Z,1510682741.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:41.732Z,1510682741.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:42.135Z,1510682742.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:42.536Z,1510682742.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:42.939Z,1510682742.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:43.336Z,1510682743.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:43.736Z,1510682743.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:44.139Z,1510682744.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:44.535Z,1510682744.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:44.936Z,1510682744.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:45.339Z,1510682745.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:45.735Z,1510682745.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:46.136Z,1510682746.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:46.540Z,1510682746.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:46.936Z,1510682746.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:47.336Z,1510682747.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:47.740Z,1510682747.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:48.136Z,1510682748.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:48.539Z,1510682748.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:48.941Z,1510682748.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:49.340Z,1510682749.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:49.736Z,1510682749.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:50.133Z,1510682750.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:50.533Z,1510682750.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:50.936Z,1510682750.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:51.340Z,1510682751.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:51.736Z,1510682751.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:52.136Z,1510682752.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:52.540Z,1510682752.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:52.935Z,1510682752.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:53.336Z,1510682753.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:53.733Z,1510682753.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:54.136Z,1510682754.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:54.540Z,1510682754.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:54.930Z,1510682754.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:55.340Z,1510682755.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:55.740Z,1510682755.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:56.130Z,1510682756.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:56.530Z,1510682756.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:56.930Z,1510682756.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:57.337Z,1510682757.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:57.730Z,1510682757.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:58.130Z,1510682758.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:58.530Z,1510682758.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:58.941Z,1510682758.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:59.330Z,1510682759.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:05:59.730Z,1510682759.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:00.141Z,1510682760.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:00.534Z,1510682760.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:00.930Z,1510682760.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:01.335Z,1510682761.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:01.731Z,1510682761.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:02.129Z,1510682762.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:02.531Z,1510682762.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:02.935Z,1510682762.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:03.334Z,1510682763.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:03.730Z,1510682763.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:04.130Z,1510682764.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:04.530Z,1510682764.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:04.930Z,1510682764.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:05.330Z,1510682765.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:05.729Z,1510682765.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:06.130Z,1510682766.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:06.530Z,1510682766.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:06.930Z,1510682766.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:07.330Z,1510682767.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:07.734Z,1510682767.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:06:28.258Z,1510682788.258 [PNI_TCM](ERROR): CRC does not match. Expected:0x41901 got:0x23996
2017-11-14T18:06:50.653Z,1510682810.653 [PNI_TCM](ERROR): CRC does not match. Expected:0x32281 got:0x6937
2017-11-14T18:06:59.870Z,1510682819.870 [PNI_TCM](ERROR): CRC does not match. Expected:0x17446 got:0x6461
2017-11-14T18:07:13.454Z,1510682833.454 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-14T18:07:13.454Z,1510682833.454 [BPC1] Data Fault, FailCount= 1
2017-11-14T18:07:13.454Z,1510682833.454 [BPC1](ERROR): Data Fault
2017-11-14T18:07:13.508Z,1510682833.508 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-14T18:07:17.376Z,1510682837.376 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-14T18:07:17.376Z,1510682837.376 [BPC1] No Fault, FailCount= 1
2017-11-14T18:07:57.829Z,1510682877.829 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:07:57.829Z,1510682877.829 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-11-14T18:07:57.829Z,1510682877.829 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T18:07:57.842Z,1510682877.842 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T18:07:58.244Z,1510682878.244 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T18:07:58.244Z,1510682878.244 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-11-14T18:07:58.634Z,1510682878.634 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T18:07:58.635Z,1510682878.635 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:07:58.635Z,1510682878.635 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:08:51.022Z,1510682931.022 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-14T18:09:01.820Z,1510682941.820 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:09:01.820Z,1510682941.820 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-14T18:09:01.880Z,1510682941.880 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:09:01.880Z,1510682941.880 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:09:01.881Z,1510682941.881 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:09:01.881Z,1510682941.881 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-14T18:09:01.881Z,1510682941.881 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:09:02.234Z,1510682942.234 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:09:02.288Z,1510682942.288 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:09:02.375Z,1510682942.375 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:09:03.813Z,1510682943.813 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:09:03.813Z,1510682943.813 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-14T18:09:03.988Z,1510682943.988 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:09:03.989Z,1510682943.989 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:09:03.989Z,1510682943.989 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:09:03.989Z,1510682943.989 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-14T18:09:03.989Z,1510682943.989 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:09:04.226Z,1510682944.226 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:09:04.392Z,1510682944.392 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:09:04.479Z,1510682944.479 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:09:05.807Z,1510682945.807 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:09:05.807Z,1510682945.807 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-14T18:09:06.096Z,1510682946.096 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:09:06.097Z,1510682946.097 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:09:06.097Z,1510682946.097 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:09:06.097Z,1510682946.097 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-14T18:09:06.097Z,1510682946.097 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:09:06.213Z,1510682946.213 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:09:06.500Z,1510682946.500 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:09:06.698Z,1510682946.698 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:09:08.219Z,1510682948.219 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:09:08.219Z,1510682948.219 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-14T18:09:08.312Z,1510682948.312 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:09:08.313Z,1510682948.313 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:09:08.313Z,1510682948.313 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:09:08.313Z,1510682948.313 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-14T18:09:08.313Z,1510682948.313 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:09:08.625Z,1510682948.625 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:09:08.716Z,1510682948.716 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:09:08.798Z,1510682948.798 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:09:10.223Z,1510682950.223 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:09:10.223Z,1510682950.223 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-14T18:09:10.412Z,1510682950.412 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:09:10.413Z,1510682950.413 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:09:10.413Z,1510682950.413 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:09:10.413Z,1510682950.413 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-14T18:09:10.413Z,1510682950.413 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:09:10.616Z,1510682950.616 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:09:10.616Z,1510682950.616 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:09:10.816Z,1510682950.816 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:09:10.898Z,1510682950.898 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:10:13.868Z,1510683013.868 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-14T18:10:13.868Z,1510683013.868 [Default:CheckIn:C.Wait] Stopped
2017-11-14T18:10:13.868Z,1510683013.868 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-14T18:10:13.868Z,1510683013.868 [Default:CheckIn:D] Running Loop=1
2017-11-14T18:10:14.271Z,1510683014.271 [Default:CheckIn:D] Stopped
2017-11-14T18:10:14.271Z,1510683014.271 [Default:CheckIn:E] Running Loop=1
2017-11-14T18:10:14.713Z,1510683014.713 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 8.240091 min 
2017-11-14T18:10:14.716Z,1510683014.716 [Default:CheckIn:E] Stopped
2017-11-14T18:10:14.717Z,1510683014.717 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-14T18:10:14.717Z,1510683014.717 [Default:CheckIn] Stopped
2017-11-14T18:10:14.717Z,1510683014.717 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-14T18:10:14.717Z,1510683014.717 [Default:CheckIn](INFO): Running loop #2
2017-11-14T18:10:14.717Z,1510683014.717 [Default:CheckIn] Running Loop=2
2017-11-14T18:10:14.717Z,1510683014.717 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-14T18:10:14.717Z,1510683014.717 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-14T18:10:18.276Z,1510683018.276 [NAL9602](INFO): Powering up
2017-11-14T18:10:29.197Z,1510683029.197 [NAL9602](INFO): NAL9602 initialized
2017-11-14T18:10:58.835Z,1510683058.835 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:10:58.835Z,1510683058.835 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-11-14T18:10:58.835Z,1510683058.835 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T18:10:58.880Z,1510683058.880 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T18:10:59.319Z,1510683059.319 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T18:10:59.319Z,1510683059.319 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-11-14T18:10:59.641Z,1510683059.641 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T18:10:59.642Z,1510683059.642 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:10:59.642Z,1510683059.642 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:11:01.194Z,1510683061.194 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-11-14T18:11:01.276Z,1510683061.276 [NAL9602](FAULT): received: 
+CSQ:0

OK
2017-11-14T18:11:01.276Z,1510683061.276 [NAL9602] Data Fault, FailCount= 1
2017-11-14T18:11:01.276Z,1510683061.276 [NAL9602](ERROR): Data Fault
2017-11-14T18:11:01.357Z,1510683061.357 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-14T18:11:01.593Z,1510683061.593 [NAL9602](INFO): Powering down
2017-11-14T18:11:02.447Z,1510683062.447 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-14T18:11:02.447Z,1510683062.447 [NAL9602] No Fault, FailCount= 1
2017-11-14T18:11:31.965Z,1510683091.965 [NAL9602](INFO): Powering up NAL9602
2017-11-14T18:11:43.165Z,1510683103.165 [NAL9602](INFO): NAL9602 initialized
2017-11-14T18:13:23.679Z,1510683203.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:24.070Z,1510683204.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:24.470Z,1510683204.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:24.877Z,1510683204.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:25.270Z,1510683205.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:25.670Z,1510683205.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:26.093Z,1510683206.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:26.488Z,1510683206.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:26.870Z,1510683206.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:57.270Z,1510683237.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:57.670Z,1510683237.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:58.070Z,1510683238.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:58.470Z,1510683238.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:58.891Z,1510683238.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:59.288Z,1510683239.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:59.685Z,1510683239.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:13:59.713Z,1510683239.713 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:13:59.713Z,1510683239.713 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-11-14T18:13:59.713Z,1510683239.713 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T18:13:59.726Z,1510683239.726 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T18:14:00.095Z,1510683240.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:00.127Z,1510683240.127 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T18:14:00.127Z,1510683240.127 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-11-14T18:14:00.470Z,1510683240.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:00.514Z,1510683240.514 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T18:14:00.515Z,1510683240.515 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:14:00.515Z,1510683240.515 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:14:00.871Z,1510683240.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:01.274Z,1510683241.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:01.674Z,1510683241.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:02.074Z,1510683242.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:02.477Z,1510683242.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:02.876Z,1510683242.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:03.274Z,1510683243.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:03.673Z,1510683243.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:04.084Z,1510683244.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:04.483Z,1510683244.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:04.887Z,1510683244.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:05.290Z,1510683245.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:05.677Z,1510683245.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:06.073Z,1510683246.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:06.480Z,1510683246.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:06.873Z,1510683246.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:07.273Z,1510683247.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:14:07.677Z,1510683247.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:14.765Z,1510683314.765 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-14T18:10:14.7Z
2017-11-14T18:15:14.765Z,1510683314.765 [Default:CheckIn:Read_GPS] Stopped
2017-11-14T18:15:14.765Z,1510683314.765 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-14T18:15:19.122Z,1510683319.122 [DataOverHttps](INFO): Sending 196 bytes from file Logs/20171114T175840/Courier0012.lzma
2017-11-14T18:15:19.893Z,1510683319.893 [DataOverHttps](INFO): Moved sent file to Logs/20171114T175840/Courier0012.lzma.bak
2017-11-14T18:15:19.893Z,1510683319.893 [DataOverHttps](INFO): SBD MOMSN=5235998
2017-11-14T18:15:23.995Z,1510683323.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:24.122Z,1510683324.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:24.478Z,1510683324.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:24.878Z,1510683324.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:25.281Z,1510683325.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:25.676Z,1510683325.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:28.905Z,1510683328.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:29.040Z,1510683329.040 [DataOverHttps](INFO): Sending 263 bytes from file Logs/20171114T175840/Express0013.lzma
2017-11-14T18:15:29.110Z,1510683329.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:29.462Z,1510683329.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:29.841Z,1510683329.841 [DataOverHttps](INFO): Moved sent file to Logs/20171114T175840/Express0013.lzma.bak
2017-11-14T18:15:29.841Z,1510683329.841 [DataOverHttps](INFO): SBD MOMSN=5236000
2017-11-14T18:15:29.863Z,1510683329.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:30.293Z,1510683330.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:30.314Z,1510683330.314 [Default:CheckIn:Read_Iridium] Stopped
2017-11-14T18:15:30.314Z,1510683330.314 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-14T18:15:30.314Z,1510683330.314 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-14T18:15:30.667Z,1510683330.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:33.735Z,1510683333.735 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-14T18:15:33.753Z,1510683333.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:33.873Z,1510683333.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:34.258Z,1510683334.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:34.658Z,1510683334.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:35.052Z,1510683335.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:35.060Z,1510683335.060 [PNI_TCM](ERROR): CRC does not match. Expected:0x11591 got:0x31517
2017-11-14T18:15:35.453Z,1510683335.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:35.850Z,1510683335.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:36.251Z,1510683336.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:36.652Z,1510683336.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:37.055Z,1510683337.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:37.453Z,1510683337.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:37.852Z,1510683337.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:38.258Z,1510683338.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:38.653Z,1510683338.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:39.053Z,1510683339.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:39.456Z,1510683339.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:39.859Z,1510683339.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:39.866Z,1510683339.866 [PNI_TCM](ERROR): CRC does not match. Expected:0x10148 got:0x6977
2017-11-14T18:15:40.247Z,1510683340.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:40.648Z,1510683340.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:41.046Z,1510683341.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:41.446Z,1510683341.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:41.857Z,1510683341.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:42.254Z,1510683342.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:42.648Z,1510683342.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:43.054Z,1510683343.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:43.461Z,1510683343.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:43.856Z,1510683343.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:15:44.668Z,1510683344.668 [PNI_TCM](ERROR): CRC does not match. Expected:0x24400 got:0x45080
2017-11-14T18:15:46.262Z,1510683346.262 [PNI_TCM](ERROR): CRC does not match. Expected:0x53414 got:0x7490
2017-11-14T18:15:51.061Z,1510683351.061 [PNI_TCM](ERROR): CRC does not match. Expected:0x42877 got:0x41496
2017-11-14T18:16:02.259Z,1510683362.259 [PNI_TCM](ERROR): CRC does not match. Expected:0x27996 got:0x37145
2017-11-14T18:16:04.229Z,1510683364.229 [NAL9602](INFO): Powering down
2017-11-14T18:16:05.453Z,1510683365.453 [PNI_TCM](ERROR): CRC does not match. Expected:0x35720 got:0x1346
2017-11-14T18:16:05.859Z,1510683365.859 [PNI_TCM](ERROR): CRC does not match. Expected:0x4601 got:0x6977
2017-11-14T18:16:29.468Z,1510683389.468 [PNI_TCM](ERROR): CRC does not match. Expected:0x14075 got:0x17044
2017-11-14T18:16:41.180Z,1510683401.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:41.579Z,1510683401.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:41.979Z,1510683401.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:42.378Z,1510683402.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:42.779Z,1510683402.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:43.178Z,1510683403.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:43.579Z,1510683403.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:43.979Z,1510683403.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:44.378Z,1510683404.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:44.778Z,1510683404.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:45.180Z,1510683405.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:45.583Z,1510683405.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:45.983Z,1510683405.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:46.379Z,1510683406.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:46.780Z,1510683406.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:47.180Z,1510683407.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:47.580Z,1510683407.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:47.980Z,1510683407.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:48.379Z,1510683408.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:48.784Z,1510683408.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:49.179Z,1510683409.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:49.580Z,1510683409.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:49.984Z,1510683409.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:50.380Z,1510683410.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:50.779Z,1510683410.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:51.180Z,1510683411.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:51.580Z,1510683411.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:51.979Z,1510683411.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:52.381Z,1510683412.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:52.780Z,1510683412.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:53.179Z,1510683413.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:53.579Z,1510683413.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:53.980Z,1510683413.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:54.381Z,1510683414.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:54.778Z,1510683414.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:55.174Z,1510683415.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:55.574Z,1510683415.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:55.974Z,1510683415.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:56.374Z,1510683416.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:56.774Z,1510683416.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:57.174Z,1510683417.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:57.574Z,1510683417.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:57.974Z,1510683417.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:58.378Z,1510683418.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:58.774Z,1510683418.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:59.174Z,1510683419.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:59.574Z,1510683419.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:16:59.974Z,1510683419.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:00.378Z,1510683420.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:00.774Z,1510683420.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:00.809Z,1510683420.809 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:17:00.809Z,1510683420.809 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-11-14T18:17:00.809Z,1510683420.809 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T18:17:00.822Z,1510683420.822 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T18:17:01.174Z,1510683421.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:01.266Z,1510683421.266 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T18:17:01.266Z,1510683421.266 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-11-14T18:17:01.578Z,1510683421.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:01.611Z,1510683421.611 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T18:17:01.612Z,1510683421.612 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:17:01.612Z,1510683421.612 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:17:01.979Z,1510683421.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:02.373Z,1510683422.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:02.774Z,1510683422.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:03.174Z,1510683423.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:03.574Z,1510683423.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:03.978Z,1510683423.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:04.378Z,1510683424.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:04.773Z,1510683424.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:05.174Z,1510683425.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:05.578Z,1510683425.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:05.978Z,1510683425.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:06.377Z,1510683426.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:06.781Z,1510683426.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:07.179Z,1510683427.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:07.580Z,1510683427.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:07.976Z,1510683427.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:08.379Z,1510683428.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:08.780Z,1510683428.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:09.181Z,1510683429.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:09.579Z,1510683429.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:09.979Z,1510683429.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:10.380Z,1510683430.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:10.780Z,1510683430.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:11.181Z,1510683431.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:11.579Z,1510683431.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:11.978Z,1510683431.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:12.380Z,1510683432.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:12.782Z,1510683432.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:13.183Z,1510683433.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:13.579Z,1510683433.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:13.979Z,1510683433.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:14.379Z,1510683434.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:14.779Z,1510683434.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:15.179Z,1510683435.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:15.579Z,1510683435.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:15.980Z,1510683435.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:16.376Z,1510683436.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:16.780Z,1510683436.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:17.180Z,1510683437.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:17.585Z,1510683437.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:17.974Z,1510683437.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:18.382Z,1510683438.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:18.774Z,1510683438.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:19.182Z,1510683439.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:19.575Z,1510683439.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:19.974Z,1510683439.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:20.378Z,1510683440.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:20.778Z,1510683440.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:21.174Z,1510683441.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:21.573Z,1510683441.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:21.978Z,1510683441.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:22.378Z,1510683442.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:22.774Z,1510683442.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:23.174Z,1510683443.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:23.574Z,1510683443.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:23.974Z,1510683443.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:24.373Z,1510683444.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:24.774Z,1510683444.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:25.174Z,1510683445.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:25.574Z,1510683445.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:25.973Z,1510683445.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:26.374Z,1510683446.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:26.774Z,1510683446.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:27.174Z,1510683447.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:27.574Z,1510683447.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:27.974Z,1510683447.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:28.374Z,1510683448.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:28.774Z,1510683448.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:29.174Z,1510683449.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:29.573Z,1510683449.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:29.974Z,1510683449.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:30.374Z,1510683450.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:30.778Z,1510683450.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:31.187Z,1510683451.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:34.432Z,1510683454.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:34.557Z,1510683454.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:34.901Z,1510683454.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:35.303Z,1510683455.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:35.694Z,1510683455.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:36.104Z,1510683456.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:36.494Z,1510683456.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:36.894Z,1510683456.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:37.294Z,1510683457.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:37.694Z,1510683457.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:38.104Z,1510683458.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:38.494Z,1510683458.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:38.894Z,1510683458.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:39.294Z,1510683459.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:39.694Z,1510683459.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:40.103Z,1510683460.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:40.494Z,1510683460.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:40.904Z,1510683460.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:41.294Z,1510683461.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:41.693Z,1510683461.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:42.094Z,1510683462.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:42.494Z,1510683462.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:42.894Z,1510683462.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:43.294Z,1510683463.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:43.694Z,1510683463.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:44.094Z,1510683464.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:44.501Z,1510683464.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:44.900Z,1510683464.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:45.296Z,1510683465.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:45.701Z,1510683465.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:46.099Z,1510683466.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:46.499Z,1510683466.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:46.901Z,1510683466.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:47.300Z,1510683467.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:47.700Z,1510683467.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:48.096Z,1510683468.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:48.499Z,1510683468.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:48.899Z,1510683468.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:49.305Z,1510683469.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:49.699Z,1510683469.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:50.098Z,1510683470.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:50.500Z,1510683470.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:50.900Z,1510683470.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:51.301Z,1510683471.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:51.697Z,1510683471.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:52.100Z,1510683472.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:52.500Z,1510683472.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:52.904Z,1510683472.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:53.300Z,1510683473.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:53.699Z,1510683473.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:54.103Z,1510683474.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:54.499Z,1510683474.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:54.901Z,1510683474.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:55.301Z,1510683475.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:55.699Z,1510683475.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:56.101Z,1510683476.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:56.496Z,1510683476.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:56.900Z,1510683476.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:57.300Z,1510683477.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:57.701Z,1510683477.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:58.100Z,1510683478.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:58.501Z,1510683478.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:58.900Z,1510683478.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:59.300Z,1510683479.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:17:59.699Z,1510683479.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:00.099Z,1510683480.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:00.499Z,1510683480.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:00.903Z,1510683480.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:01.299Z,1510683481.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:01.696Z,1510683481.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:02.098Z,1510683482.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:02.496Z,1510683482.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:02.903Z,1510683482.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:03.299Z,1510683483.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:03.699Z,1510683483.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:04.099Z,1510683484.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:04.500Z,1510683484.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:04.896Z,1510683484.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:05.304Z,1510683485.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:05.699Z,1510683485.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:06.104Z,1510683486.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:06.494Z,1510683486.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:06.895Z,1510683486.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:07.298Z,1510683487.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:07.695Z,1510683487.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:08.095Z,1510683488.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:08.494Z,1510683488.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:08.898Z,1510683488.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:09.293Z,1510683489.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:09.694Z,1510683489.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:10.098Z,1510683490.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:10.498Z,1510683490.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:10.894Z,1510683490.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:11.294Z,1510683491.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:11.694Z,1510683491.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:12.094Z,1510683492.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:12.494Z,1510683492.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:12.894Z,1510683492.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:13.298Z,1510683493.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:13.694Z,1510683493.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:14.094Z,1510683494.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:14.494Z,1510683494.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:14.894Z,1510683494.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:15.293Z,1510683495.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:15.694Z,1510683495.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:16.094Z,1510683496.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:16.494Z,1510683496.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:16.894Z,1510683496.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:17.293Z,1510683497.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:17.693Z,1510683497.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:18.094Z,1510683498.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:18.498Z,1510683498.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:18.894Z,1510683498.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:19.293Z,1510683499.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:19.701Z,1510683499.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:20.100Z,1510683500.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:20.500Z,1510683500.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:20.901Z,1510683500.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:21.302Z,1510683501.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:21.700Z,1510683501.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:22.104Z,1510683502.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:22.502Z,1510683502.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:22.900Z,1510683502.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:23.304Z,1510683503.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:23.700Z,1510683503.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:24.100Z,1510683504.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:24.504Z,1510683504.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:24.903Z,1510683504.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:25.303Z,1510683505.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:25.704Z,1510683505.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:26.103Z,1510683506.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:26.500Z,1510683506.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:26.897Z,1510683506.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:27.299Z,1510683507.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:27.700Z,1510683507.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:28.103Z,1510683508.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:28.499Z,1510683508.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:28.903Z,1510683508.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:29.304Z,1510683509.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:29.699Z,1510683509.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:30.100Z,1510683510.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:30.504Z,1510683510.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:30.904Z,1510683510.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:31.304Z,1510683511.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:34.410Z,1510683514.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:34.520Z,1510683514.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:34.873Z,1510683514.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:35.273Z,1510683515.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:35.671Z,1510683515.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:36.071Z,1510683516.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:36.471Z,1510683516.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:36.871Z,1510683516.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:37.271Z,1510683517.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:37.672Z,1510683517.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:38.071Z,1510683518.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:38.471Z,1510683518.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:38.872Z,1510683518.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:39.269Z,1510683519.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:39.672Z,1510683519.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:40.072Z,1510683520.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:40.472Z,1510683520.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:40.875Z,1510683520.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:41.271Z,1510683521.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:41.672Z,1510683521.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:42.071Z,1510683522.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:42.477Z,1510683522.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:42.872Z,1510683522.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:43.272Z,1510683523.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:43.672Z,1510683523.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:44.074Z,1510683524.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:44.474Z,1510683524.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:44.870Z,1510683524.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:45.271Z,1510683525.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:45.671Z,1510683525.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:46.068Z,1510683526.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:46.468Z,1510683526.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:46.869Z,1510683526.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:47.272Z,1510683527.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:47.672Z,1510683527.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:48.069Z,1510683528.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:48.469Z,1510683528.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:48.872Z,1510683528.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:49.281Z,1510683529.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:49.672Z,1510683529.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:50.072Z,1510683530.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:50.471Z,1510683530.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:50.872Z,1510683530.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:51.272Z,1510683531.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:51.311Z,1510683531.311 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-14T18:18:51.672Z,1510683531.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:52.071Z,1510683532.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:52.471Z,1510683532.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:52.872Z,1510683532.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:53.272Z,1510683533.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:53.672Z,1510683533.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:54.072Z,1510683534.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:54.475Z,1510683534.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:54.876Z,1510683534.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:55.272Z,1510683535.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:55.671Z,1510683535.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:56.069Z,1510683536.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:56.472Z,1510683536.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:56.872Z,1510683536.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:57.275Z,1510683537.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:57.672Z,1510683537.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:58.075Z,1510683538.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:58.475Z,1510683538.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:58.872Z,1510683538.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:59.271Z,1510683539.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:18:59.675Z,1510683539.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:00.072Z,1510683540.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:00.472Z,1510683540.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:00.869Z,1510683540.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:01.275Z,1510683541.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:01.671Z,1510683541.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:02.076Z,1510683542.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:02.472Z,1510683542.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:02.872Z,1510683542.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:03.275Z,1510683543.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:03.672Z,1510683543.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:04.071Z,1510683544.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:04.472Z,1510683544.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:04.872Z,1510683544.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:05.272Z,1510683545.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:05.675Z,1510683545.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:06.072Z,1510683546.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:06.472Z,1510683546.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:06.869Z,1510683546.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:07.273Z,1510683547.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:07.670Z,1510683547.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:08.075Z,1510683548.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:08.472Z,1510683548.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:08.872Z,1510683548.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:09.278Z,1510683549.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:09.672Z,1510683549.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:10.073Z,1510683550.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:10.475Z,1510683550.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:10.512Z,1510683550.512 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:19:10.512Z,1510683550.512 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-14T18:19:10.720Z,1510683550.720 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:19:10.721Z,1510683550.721 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:19:10.721Z,1510683550.721 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:19:10.721Z,1510683550.721 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-14T18:19:10.721Z,1510683550.721 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:19:10.872Z,1510683550.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:10.910Z,1510683550.910 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:19:11.124Z,1510683551.124 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:19:11.213Z,1510683551.213 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:19:11.278Z,1510683551.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:11.669Z,1510683551.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:11.708Z,1510683551.708 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-14T18:19:11.708Z,1510683551.708 [BPC1] Data Fault, FailCount= 1
2017-11-14T18:19:11.708Z,1510683551.708 [BPC1](ERROR): Data Fault
2017-11-14T18:19:11.776Z,1510683551.776 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-14T18:19:12.066Z,1510683552.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:12.478Z,1510683552.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:12.511Z,1510683552.511 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:19:12.511Z,1510683552.511 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-14T18:19:12.828Z,1510683552.828 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:19:12.828Z,1510683552.828 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:19:12.829Z,1510683552.829 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:19:12.829Z,1510683552.829 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-14T18:19:12.829Z,1510683552.829 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:19:12.867Z,1510683552.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:12.945Z,1510683552.945 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:19:12.945Z,1510683552.945 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-14T18:19:12.945Z,1510683552.945 [BPC1] No Fault, FailCount= 1
2017-11-14T18:19:13.232Z,1510683553.232 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:19:13.291Z,1510683553.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:13.385Z,1510683553.385 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:19:13.666Z,1510683553.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:14.070Z,1510683554.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:14.473Z,1510683554.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:14.873Z,1510683554.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:14.930Z,1510683554.930 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:19:14.930Z,1510683554.930 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-14T18:19:14.000Z,1510683555.000 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:19:15.000Z,1510683555.000 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:19:15.001Z,1510683555.001 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:19:15.001Z,1510683555.001 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-14T18:19:15.001Z,1510683555.001 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:19:15.271Z,1510683555.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:15.313Z,1510683555.313 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:19:15.404Z,1510683555.404 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:19:15.495Z,1510683555.495 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:19:15.678Z,1510683555.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:16.072Z,1510683556.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:16.475Z,1510683556.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:16.872Z,1510683556.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:16.911Z,1510683556.911 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:19:16.912Z,1510683556.912 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-14T18:19:17.113Z,1510683557.113 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:19:17.114Z,1510683557.114 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:19:17.114Z,1510683557.114 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:19:17.114Z,1510683557.114 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-14T18:19:17.114Z,1510683557.114 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:19:17.276Z,1510683557.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:17.308Z,1510683557.308 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:19:17.516Z,1510683557.516 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:19:17.596Z,1510683557.596 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:19:17.677Z,1510683557.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:18.076Z,1510683558.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:18.471Z,1510683558.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:18.873Z,1510683558.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:18.905Z,1510683558.905 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-14T18:19:18.905Z,1510683558.905 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-14T18:19:19.213Z,1510683559.213 [Rowe_600LCM](INFO): Initializing
2017-11-14T18:19:19.214Z,1510683559.214 [Rowe_600LCM](INFO): Checking LCM
2017-11-14T18:19:19.214Z,1510683559.214 [Rowe_600LCM](FAULT): LCM not connected
2017-11-14T18:19:19.214Z,1510683559.214 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-14T18:19:19.214Z,1510683559.214 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-14T18:19:19.273Z,1510683559.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:19.337Z,1510683559.337 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:19:19.337Z,1510683559.337 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-14T18:19:19.616Z,1510683559.616 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-14T18:19:19.682Z,1510683559.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:19.814Z,1510683559.814 [Rowe_600LCM](INFO): Powering down
2017-11-14T18:19:20.077Z,1510683560.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:20.467Z,1510683560.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:20.877Z,1510683560.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:21.266Z,1510683561.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:21.670Z,1510683561.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:22.066Z,1510683562.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:22.466Z,1510683562.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:22.866Z,1510683562.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:23.266Z,1510683563.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:23.665Z,1510683563.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:24.066Z,1510683564.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:24.466Z,1510683564.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:24.866Z,1510683564.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:25.270Z,1510683565.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:25.666Z,1510683565.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:26.065Z,1510683566.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:26.465Z,1510683566.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:26.866Z,1510683566.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:27.270Z,1510683567.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:27.665Z,1510683567.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:28.066Z,1510683568.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:28.470Z,1510683568.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:28.870Z,1510683568.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:29.266Z,1510683569.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:29.670Z,1510683569.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:30.070Z,1510683570.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:30.466Z,1510683570.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:30.866Z,1510683570.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:31.270Z,1510683571.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:31.670Z,1510683571.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:34.771Z,1510683574.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:34.960Z,1510683574.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:35.326Z,1510683575.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:35.726Z,1510683575.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:36.126Z,1510683576.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:36.522Z,1510683576.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:36.926Z,1510683576.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:37.326Z,1510683577.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:37.726Z,1510683577.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:38.125Z,1510683578.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:38.522Z,1510683578.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:38.925Z,1510683578.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:39.325Z,1510683579.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:39.726Z,1510683579.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:40.125Z,1510683580.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:40.522Z,1510683580.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:40.930Z,1510683580.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:41.330Z,1510683581.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:41.724Z,1510683581.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:42.130Z,1510683582.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:42.527Z,1510683582.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:42.927Z,1510683582.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:43.328Z,1510683583.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:43.727Z,1510683583.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:44.126Z,1510683584.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:44.528Z,1510683584.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:44.927Z,1510683584.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:45.331Z,1510683585.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:45.729Z,1510683585.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:46.131Z,1510683586.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:46.531Z,1510683586.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:46.931Z,1510683586.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:47.327Z,1510683587.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:47.727Z,1510683587.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:48.131Z,1510683588.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:48.528Z,1510683588.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:48.932Z,1510683588.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:49.325Z,1510683589.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:49.728Z,1510683589.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:50.128Z,1510683590.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:50.529Z,1510683590.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:50.922Z,1510683590.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:51.322Z,1510683591.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:51.722Z,1510683591.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:52.122Z,1510683592.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:52.533Z,1510683592.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:52.922Z,1510683592.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:53.322Z,1510683593.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:53.723Z,1510683593.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:54.129Z,1510683594.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:54.522Z,1510683594.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:54.922Z,1510683594.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:55.329Z,1510683595.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:55.722Z,1510683595.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:56.122Z,1510683596.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:56.527Z,1510683596.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:56.922Z,1510683596.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:57.321Z,1510683597.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:57.735Z,1510683597.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:58.122Z,1510683598.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:58.522Z,1510683598.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:58.922Z,1510683598.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:59.322Z,1510683599.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:19:59.722Z,1510683599.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:00.130Z,1510683600.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:00.526Z,1510683600.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:00.929Z,1510683600.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:01.327Z,1510683601.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:01.727Z,1510683601.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:01.750Z,1510683601.750 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:20:01.751Z,1510683601.751 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-11-14T18:20:01.751Z,1510683601.751 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T18:20:01.787Z,1510683601.787 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T18:20:02.133Z,1510683602.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:02.188Z,1510683602.188 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T18:20:02.188Z,1510683602.188 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-11-14T18:20:02.528Z,1510683602.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:02.546Z,1510683602.546 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T18:20:02.547Z,1510683602.547 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:20:02.547Z,1510683602.547 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:20:02.928Z,1510683602.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:03.327Z,1510683603.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:03.728Z,1510683603.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:04.127Z,1510683604.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:04.527Z,1510683604.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:04.931Z,1510683604.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:05.327Z,1510683605.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:05.727Z,1510683605.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:06.131Z,1510683606.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:06.527Z,1510683606.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:06.928Z,1510683606.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:07.327Z,1510683607.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:07.726Z,1510683607.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:08.129Z,1510683608.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:08.527Z,1510683608.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:08.927Z,1510683608.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:09.333Z,1510683609.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:09.727Z,1510683609.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:10.126Z,1510683610.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:10.525Z,1510683610.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:10.924Z,1510683610.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:11.327Z,1510683611.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:11.727Z,1510683611.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:12.127Z,1510683612.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:12.527Z,1510683612.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:12.927Z,1510683612.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:13.331Z,1510683613.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:13.727Z,1510683613.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:14.127Z,1510683614.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:14.524Z,1510683614.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:14.927Z,1510683614.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:15.327Z,1510683615.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:15.727Z,1510683615.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:16.124Z,1510683616.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:16.527Z,1510683616.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:16.931Z,1510683616.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:17.332Z,1510683617.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:17.728Z,1510683617.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:18.131Z,1510683618.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:18.531Z,1510683618.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:18.928Z,1510683618.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:19.322Z,1510683619.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:19.722Z,1510683619.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:20.121Z,1510683620.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:20.522Z,1510683620.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:20.922Z,1510683620.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:21.322Z,1510683621.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:21.722Z,1510683621.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:22.129Z,1510683622.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:22.522Z,1510683622.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:22.922Z,1510683622.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:23.322Z,1510683623.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:23.722Z,1510683623.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:24.122Z,1510683624.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:24.529Z,1510683624.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:24.922Z,1510683624.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:25.322Z,1510683625.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:25.722Z,1510683625.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:26.122Z,1510683626.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:26.522Z,1510683626.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:26.926Z,1510683626.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:27.322Z,1510683627.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:27.726Z,1510683627.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:28.126Z,1510683628.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:28.522Z,1510683628.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:28.926Z,1510683628.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:29.326Z,1510683629.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:29.722Z,1510683629.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:30.122Z,1510683630.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:30.526Z,1510683630.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:30.922Z,1510683630.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:30.959Z,1510683630.959 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-14T18:20:30.959Z,1510683630.959 [Default:CheckIn:C.Wait] Stopped
2017-11-14T18:20:30.959Z,1510683630.959 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-14T18:20:30.959Z,1510683630.959 [Default:CheckIn:D] Running Loop=1
2017-11-14T18:20:31.326Z,1510683631.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:31.364Z,1510683631.364 [Default:CheckIn:D] Stopped
2017-11-14T18:20:31.364Z,1510683631.364 [Default:CheckIn:E] Running Loop=1
2017-11-14T18:20:31.737Z,1510683631.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:31.760Z,1510683631.760 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 18.525016 min 
2017-11-14T18:20:31.760Z,1510683631.760 [Default:CheckIn:E] Stopped
2017-11-14T18:20:31.760Z,1510683631.760 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-14T18:20:31.760Z,1510683631.760 [Default:CheckIn] Stopped
2017-11-14T18:20:31.761Z,1510683631.761 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-14T18:20:31.761Z,1510683631.761 [Default:CheckIn](INFO): Running loop #3
2017-11-14T18:20:31.761Z,1510683631.761 [Default:CheckIn] Running Loop=3
2017-11-14T18:20:31.761Z,1510683631.761 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-14T18:20:31.761Z,1510683631.761 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-14T18:20:34.954Z,1510683634.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:35.045Z,1510683635.045 [NAL9602](INFO): Powering up
2017-11-14T18:20:35.066Z,1510683635.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:35.452Z,1510683635.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:35.848Z,1510683635.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:35.856Z,1510683635.856 [PNI_TCM](ERROR): CRC does not match. Expected:0x638 got:0x4609
2017-11-14T18:20:36.246Z,1510683636.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:36.641Z,1510683636.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:37.038Z,1510683637.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:37.438Z,1510683637.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:37.839Z,1510683637.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:38.239Z,1510683638.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:38.638Z,1510683638.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:39.038Z,1510683639.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:39.439Z,1510683639.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:39.839Z,1510683639.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:40.242Z,1510683640.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:40.637Z,1510683640.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:41.039Z,1510683641.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:41.444Z,1510683641.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:41.838Z,1510683641.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:42.237Z,1510683642.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:42.644Z,1510683642.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:43.039Z,1510683643.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:43.437Z,1510683643.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:43.838Z,1510683643.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:44.242Z,1510683644.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:44.643Z,1510683644.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:45.045Z,1510683645.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:45.447Z,1510683645.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:45.851Z,1510683645.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:46.221Z,1510683646.221 [NAL9602](INFO): NAL9602 initialized
2017-11-14T18:20:46.242Z,1510683646.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:46.638Z,1510683646.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:47.021Z,1510683647.021 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-14T18:20:47.022Z,1510683647.022 [NAL9602] Data Fault, FailCount= 2
2017-11-14T18:20:47.022Z,1510683647.022 [NAL9602](ERROR): Data Fault
2017-11-14T18:20:47.039Z,1510683647.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:47.120Z,1510683647.120 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-14T18:20:47.421Z,1510683647.421 [NAL9602](INFO): Powering down
2017-11-14T18:20:47.440Z,1510683647.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:47.839Z,1510683647.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:48.238Z,1510683648.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:48.327Z,1510683648.327 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-14T18:20:48.327Z,1510683648.327 [NAL9602] No Fault, FailCount= 2
2017-11-14T18:20:48.638Z,1510683648.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:49.038Z,1510683649.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:49.447Z,1510683649.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:49.838Z,1510683649.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:50.237Z,1510683650.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:50.638Z,1510683650.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:51.039Z,1510683651.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:51.443Z,1510683651.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:51.843Z,1510683651.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:52.244Z,1510683652.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:52.645Z,1510683652.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:53.049Z,1510683653.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:53.444Z,1510683653.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:53.845Z,1510683653.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:54.246Z,1510683654.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:54.643Z,1510683654.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:55.044Z,1510683655.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:55.446Z,1510683655.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:55.845Z,1510683655.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:56.244Z,1510683656.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:56.641Z,1510683656.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:57.041Z,1510683657.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:57.444Z,1510683657.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:57.844Z,1510683657.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:58.238Z,1510683658.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:58.638Z,1510683658.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:59.039Z,1510683659.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:59.438Z,1510683659.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:20:59.838Z,1510683659.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:00.239Z,1510683660.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:00.639Z,1510683660.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:01.038Z,1510683661.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:01.442Z,1510683661.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:01.838Z,1510683661.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:02.249Z,1510683662.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:02.643Z,1510683662.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:03.043Z,1510683663.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:03.445Z,1510683663.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:03.845Z,1510683663.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:04.243Z,1510683664.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:04.647Z,1510683664.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:05.047Z,1510683665.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:05.445Z,1510683665.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:05.842Z,1510683665.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:06.238Z,1510683666.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:06.637Z,1510683666.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:07.039Z,1510683667.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:07.441Z,1510683667.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:07.842Z,1510683667.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:08.246Z,1510683668.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:08.646Z,1510683668.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:09.043Z,1510683669.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:09.449Z,1510683669.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:09.844Z,1510683669.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:10.245Z,1510683670.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:10.641Z,1510683670.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:11.042Z,1510683671.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:11.443Z,1510683671.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:11.848Z,1510683671.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:12.247Z,1510683672.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:12.643Z,1510683672.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:13.049Z,1510683673.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:13.445Z,1510683673.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:13.843Z,1510683673.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:14.248Z,1510683674.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:14.646Z,1510683674.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:15.045Z,1510683675.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:15.440Z,1510683675.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:15.843Z,1510683675.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:16.245Z,1510683676.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:16.647Z,1510683676.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:17.041Z,1510683677.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:17.444Z,1510683677.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:17.821Z,1510683677.821 [NAL9602](INFO): Powering up NAL9602
2017-11-14T18:21:17.842Z,1510683677.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:18.249Z,1510683678.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:18.642Z,1510683678.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:19.042Z,1510683679.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:19.440Z,1510683679.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:19.847Z,1510683679.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:20.246Z,1510683680.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:20.641Z,1510683680.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:21.047Z,1510683681.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:21.447Z,1510683681.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:21.843Z,1510683681.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:22.245Z,1510683682.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:22.647Z,1510683682.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:23.040Z,1510683683.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:23.437Z,1510683683.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:23.838Z,1510683683.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:24.237Z,1510683684.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:24.639Z,1510683684.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:25.038Z,1510683685.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:25.438Z,1510683685.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:25.837Z,1510683685.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:26.239Z,1510683686.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:26.638Z,1510683686.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:27.038Z,1510683687.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:27.439Z,1510683687.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:27.839Z,1510683687.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:28.238Z,1510683688.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:28.650Z,1510683688.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:29.021Z,1510683689.021 [NAL9602](INFO): NAL9602 initialized
2017-11-14T18:21:29.039Z,1510683689.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:29.440Z,1510683689.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:29.849Z,1510683689.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:30.254Z,1510683690.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:30.650Z,1510683690.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:31.039Z,1510683691.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:31.443Z,1510683691.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:31.844Z,1510683691.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:35.227Z,1510683695.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:35.353Z,1510683695.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:35.722Z,1510683695.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:36.106Z,1510683696.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:36.502Z,1510683696.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:36.906Z,1510683696.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:37.302Z,1510683697.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:37.706Z,1510683697.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:38.102Z,1510683698.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:38.506Z,1510683698.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:38.906Z,1510683698.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:39.309Z,1510683699.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:39.734Z,1510683699.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:40.117Z,1510683700.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:40.513Z,1510683700.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:40.795Z,1510683700.795 [CommandLine](IMPORTANT): got command get CBIT.loadAtStartup
2017-11-14T18:21:40.795Z,1510683700.795 [CommandLine](IMPORTANT): CBIT.loadAtStartup 1 bool
2017-11-14T18:21:40.917Z,1510683700.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:41.305Z,1510683701.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:41.712Z,1510683701.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:42.115Z,1510683702.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:42.502Z,1510683702.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:42.927Z,1510683702.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:43.302Z,1510683703.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:43.702Z,1510683703.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:44.106Z,1510683704.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:44.528Z,1510683704.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:44.919Z,1510683704.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:45.302Z,1510683705.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:45.703Z,1510683705.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:46.107Z,1510683706.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:46.507Z,1510683706.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:46.903Z,1510683706.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:47.278Z,1510683707.278 [CommandLine](IMPORTANT): got command get CBIT.simulateHardware
2017-11-14T18:21:47.278Z,1510683707.278 [CommandLine](IMPORTANT): CBIT.simulateHardware 0 bool
2017-11-14T18:21:47.328Z,1510683707.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:47.714Z,1510683707.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:48.102Z,1510683708.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:48.506Z,1510683708.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:48.909Z,1510683708.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:49.307Z,1510683709.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:49.705Z,1510683709.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:50.107Z,1510683710.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:50.508Z,1510683710.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:50.908Z,1510683710.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:51.307Z,1510683711.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:51.709Z,1510683711.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:52.108Z,1510683712.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:52.507Z,1510683712.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:52.908Z,1510683712.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:53.308Z,1510683713.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:53.708Z,1510683713.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:54.109Z,1510683714.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:54.512Z,1510683714.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:54.908Z,1510683714.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:55.313Z,1510683715.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:55.721Z,1510683715.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:56.118Z,1510683716.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:56.514Z,1510683716.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:56.905Z,1510683716.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:57.309Z,1510683717.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:57.710Z,1510683717.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:58.105Z,1510683718.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:58.508Z,1510683718.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:58.908Z,1510683718.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:59.309Z,1510683719.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:21:59.702Z,1510683719.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:00.102Z,1510683720.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:00.502Z,1510683720.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:00.902Z,1510683720.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:01.302Z,1510683721.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:01.702Z,1510683721.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:02.109Z,1510683722.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:02.502Z,1510683722.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:02.902Z,1510683722.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:03.302Z,1510683723.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:03.702Z,1510683723.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:04.102Z,1510683724.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:04.520Z,1510683724.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:04.919Z,1510683724.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:05.302Z,1510683725.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:05.702Z,1510683725.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:06.102Z,1510683726.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:06.502Z,1510683726.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:06.906Z,1510683726.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:07.302Z,1510683727.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:07.706Z,1510683727.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:08.102Z,1510683728.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:08.502Z,1510683728.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:08.920Z,1510683728.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:09.319Z,1510683729.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:09.702Z,1510683729.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:10.106Z,1510683730.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:10.506Z,1510683730.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:10.902Z,1510683730.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:11.306Z,1510683731.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:11.706Z,1510683731.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:12.102Z,1510683732.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:12.502Z,1510683732.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:12.916Z,1510683732.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:13.313Z,1510683733.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:13.706Z,1510683733.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:14.102Z,1510683734.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:14.502Z,1510683734.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:14.902Z,1510683734.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:15.306Z,1510683735.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:15.702Z,1510683735.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:16.110Z,1510683736.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:16.506Z,1510683736.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:16.909Z,1510683736.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:17.321Z,1510683737.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:17.717Z,1510683737.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:18.118Z,1510683738.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:18.515Z,1510683738.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:18.909Z,1510683738.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:19.312Z,1510683739.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:19.711Z,1510683739.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:20.110Z,1510683740.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:20.509Z,1510683740.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:20.913Z,1510683740.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:21.305Z,1510683741.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:21.709Z,1510683741.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:22.105Z,1510683742.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:22.519Z,1510683742.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:22.923Z,1510683742.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:23.309Z,1510683743.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:23.705Z,1510683743.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:24.109Z,1510683744.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:24.509Z,1510683744.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:24.910Z,1510683744.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:25.303Z,1510683745.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:25.703Z,1510683745.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:26.115Z,1510683746.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:26.526Z,1510683746.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:26.902Z,1510683746.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:27.302Z,1510683747.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:27.706Z,1510683747.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:28.102Z,1510683748.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:28.502Z,1510683748.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:28.902Z,1510683748.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:29.302Z,1510683749.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:29.705Z,1510683749.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:30.103Z,1510683750.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:30.507Z,1510683750.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:30.903Z,1510683750.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:31.303Z,1510683751.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:31.708Z,1510683751.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:32.108Z,1510683752.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:35.227Z,1510683755.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:35.349Z,1510683755.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:35.697Z,1510683755.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:36.096Z,1510683756.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:36.492Z,1510683756.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:36.889Z,1510683756.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:37.286Z,1510683757.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:37.686Z,1510683757.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:38.086Z,1510683758.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:38.486Z,1510683758.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:38.903Z,1510683758.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:39.310Z,1510683759.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:39.686Z,1510683759.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:40.090Z,1510683760.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:40.486Z,1510683760.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:40.886Z,1510683760.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:41.286Z,1510683761.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:41.686Z,1510683761.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:42.086Z,1510683762.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:42.490Z,1510683762.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:42.890Z,1510683762.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:43.307Z,1510683763.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:43.707Z,1510683763.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:44.086Z,1510683764.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:44.486Z,1510683764.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:44.886Z,1510683764.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:45.286Z,1510683765.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:45.686Z,1510683765.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:46.086Z,1510683766.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:46.486Z,1510683766.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:46.886Z,1510683766.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:47.286Z,1510683767.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:47.700Z,1510683767.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:48.107Z,1510683768.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:48.486Z,1510683768.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:48.886Z,1510683768.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:49.286Z,1510683769.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:49.686Z,1510683769.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:49.709Z,1510683769.709 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-14T18:22:49.709Z,1510683769.709 [BPC1] Data Fault, FailCount= 1
2017-11-14T18:22:49.709Z,1510683769.709 [BPC1](ERROR): Data Fault
2017-11-14T18:22:49.735Z,1510683769.735 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-14T18:22:50.086Z,1510683770.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:50.486Z,1510683770.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:50.886Z,1510683770.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:50.927Z,1510683770.927 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-14T18:22:50.927Z,1510683770.927 [BPC1] No Fault, FailCount= 1
2017-11-14T18:22:51.286Z,1510683771.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:51.686Z,1510683771.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:52.104Z,1510683772.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:52.506Z,1510683772.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:52.886Z,1510683772.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:53.286Z,1510683773.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:53.686Z,1510683773.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:54.086Z,1510683774.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:54.486Z,1510683774.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:54.890Z,1510683774.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:55.286Z,1510683775.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:55.686Z,1510683775.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:56.094Z,1510683776.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:56.486Z,1510683776.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:56.886Z,1510683776.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:57.286Z,1510683777.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:57.686Z,1510683777.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:58.090Z,1510683778.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:58.490Z,1510683778.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:58.886Z,1510683778.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:59.287Z,1510683779.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:22:59.691Z,1510683779.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:00.112Z,1510683780.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:00.505Z,1510683780.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:00.887Z,1510683780.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:01.287Z,1510683781.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:01.687Z,1510683781.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:02.087Z,1510683782.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:02.491Z,1510683782.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:02.893Z,1510683782.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:02.913Z,1510683782.913 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-14T18:23:02.913Z,1510683782.913 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-11-14T18:23:02.913Z,1510683782.913 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-14T18:23:02.939Z,1510683782.939 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-14T18:23:03.291Z,1510683783.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:03.347Z,1510683783.347 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-14T18:23:03.347Z,1510683783.347 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-11-14T18:23:03.692Z,1510683783.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:03.717Z,1510683783.717 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-14T18:23:03.718Z,1510683783.718 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-14T18:23:03.718Z,1510683783.718 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-14T18:23:04.086Z,1510683784.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:04.502Z,1510683784.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:04.903Z,1510683784.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:05.286Z,1510683785.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:05.686Z,1510683785.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:06.086Z,1510683786.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:06.486Z,1510683786.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:06.886Z,1510683786.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:07.286Z,1510683787.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:07.699Z,1510683787.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:08.086Z,1510683788.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:08.497Z,1510683788.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:08.910Z,1510683788.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:09.311Z,1510683789.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:09.687Z,1510683789.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:10.087Z,1510683790.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:10.487Z,1510683790.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:10.891Z,1510683790.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:11.290Z,1510683791.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:11.686Z,1510683791.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:12.086Z,1510683792.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:12.486Z,1510683792.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:12.886Z,1510683792.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:13.286Z,1510683793.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:13.686Z,1510683793.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:14.086Z,1510683794.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:14.490Z,1510683794.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:14.886Z,1510683794.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:15.286Z,1510683795.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:15.695Z,1510683795.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:16.089Z,1510683796.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:16.492Z,1510683796.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:16.891Z,1510683796.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:17.292Z,1510683797.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:17.696Z,1510683797.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:18.097Z,1510683798.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:18.491Z,1510683798.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:18.890Z,1510683798.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:19.292Z,1510683799.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:19.689Z,1510683799.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:20.091Z,1510683800.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:20.495Z,1510683800.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:20.889Z,1510683800.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:21.291Z,1510683801.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:21.704Z,1510683801.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:22.097Z,1510683802.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:22.491Z,1510683802.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:22.896Z,1510683802.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:23.291Z,1510683803.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:23.691Z,1510683803.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:24.096Z,1510683804.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:24.492Z,1510683804.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:24.891Z,1510683804.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:25.296Z,1510683805.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:25.689Z,1510683805.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:26.105Z,1510683806.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:26.507Z,1510683806.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:26.886Z,1510683806.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:27.290Z,1510683807.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:27.690Z,1510683807.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:28.086Z,1510683808.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:28.486Z,1510683808.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:28.886Z,1510683808.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:29.286Z,1510683809.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:29.686Z,1510683809.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:30.086Z,1510683810.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:30.490Z,1510683810.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:30.886Z,1510683810.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:31.286Z,1510683811.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:31.690Z,1510683811.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:32.090Z,1510683812.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:32.491Z,1510683812.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:35.618Z,1510683815.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:35.797Z,1510683815.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:36.151Z,1510683816.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:36.546Z,1510683816.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:36.942Z,1510683816.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:37.346Z,1510683817.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:37.746Z,1510683817.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:38.142Z,1510683818.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:38.547Z,1510683818.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:38.942Z,1510683818.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:39.352Z,1510683819.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:39.757Z,1510683819.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:40.142Z,1510683820.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:40.542Z,1510683820.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:40.942Z,1510683820.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:41.342Z,1510683821.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:41.746Z,1510683821.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:42.146Z,1510683822.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:42.550Z,1510683822.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:42.959Z,1510683822.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:43.352Z,1510683823.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:43.747Z,1510683823.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:44.148Z,1510683824.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:44.545Z,1510683824.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:44.945Z,1510683824.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:45.353Z,1510683825.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:45.743Z,1510683825.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:46.143Z,1510683826.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:46.553Z,1510683826.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:46.942Z,1510683826.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:47.349Z,1510683827.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:47.763Z,1510683827.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:48.159Z,1510683828.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:48.542Z,1510683828.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:48.965Z,1510683828.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:49.344Z,1510683829.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:49.744Z,1510683829.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:50.150Z,1510683830.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:50.546Z,1510683830.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:50.949Z,1510683830.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:51.347Z,1510683831.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:51.748Z,1510683831.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:52.156Z,1510683832.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:52.553Z,1510683832.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:52.954Z,1510683832.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:53.347Z,1510683833.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:53.748Z,1510683833.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:54.149Z,1510683834.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:54.547Z,1510683834.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:54.948Z,1510683834.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:55.345Z,1510683835.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:55.745Z,1510683835.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:56.145Z,1510683836.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:56.563Z,1510683836.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:56.959Z,1510683836.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:57.356Z,1510683837.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:57.759Z,1510683837.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:58.142Z,1510683838.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:58.542Z,1510683838.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:58.946Z,1510683838.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:59.342Z,1510683839.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:23:59.742Z,1510683839.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:00.142Z,1510683840.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:00.542Z,1510683840.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:00.942Z,1510683840.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:01.356Z,1510683841.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:01.753Z,1510683841.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:02.152Z,1510683842.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:02.553Z,1510683842.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:02.942Z,1510683842.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:03.342Z,1510683843.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:03.749Z,1510683843.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:04.154Z,1510683844.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:04.544Z,1510683844.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:04.942Z,1510683844.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:05.342Z,1510683845.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:05.742Z,1510683845.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:06.142Z,1510683846.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:06.567Z,1510683846.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:06.959Z,1510683846.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:07.363Z,1510683847.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:07.761Z,1510683847.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:08.142Z,1510683848.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:08.542Z,1510683848.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:08.942Z,1510683848.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:09.342Z,1510683849.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:09.742Z,1510683849.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:10.142Z,1510683850.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:10.571Z,1510683850.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:10.944Z,1510683850.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:11.355Z,1510683851.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:11.780Z,1510683851.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:12.146Z,1510683852.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:12.546Z,1510683852.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:12.942Z,1510683852.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:13.342Z,1510683853.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:13.746Z,1510683853.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:14.145Z,1510683854.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:14.542Z,1510683854.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:14.946Z,1510683854.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:15.342Z,1510683855.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:15.742Z,1510683855.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:16.150Z,1510683856.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:16.550Z,1510683856.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:16.927Z,1510683856.927 [NAL9602](INFO): SBD MO Status=0, MOMSN=2776, MT Status=0, MTMSN=0
2017-11-14T18:24:16.927Z,1510683856.927 [NAL9602](INFO): No messages in MT queue
2017-11-14T18:24:16.944Z,1510683856.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:17.345Z,1510683857.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:17.757Z,1510683857.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:18.157Z,1510683858.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:18.554Z,1510683858.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:18.948Z,1510683858.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:19.346Z,1510683859.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:19.758Z,1510683859.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:20.173Z,1510683860.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:20.564Z,1510683860.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:20.963Z,1510683860.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:21.342Z,1510683861.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:21.742Z,1510683861.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:22.142Z,1510683862.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:22.543Z,1510683862.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:22.942Z,1510683862.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:23.363Z,1510683863.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:23.765Z,1510683863.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:24.156Z,1510683864.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:24.543Z,1510683864.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:24.942Z,1510683864.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:25.343Z,1510683865.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:25.741Z,1510683865.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:26.159Z,1510683866.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:26.563Z,1510683866.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:26.957Z,1510683866.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:27.346Z,1510683867.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:27.742Z,1510683867.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:28.142Z,1510683868.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:28.543Z,1510683868.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:28.947Z,1510683868.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:29.364Z,1510683869.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:29.766Z,1510683869.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:30.153Z,1510683870.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:30.542Z,1510683870.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:30.974Z,1510683870.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:31.343Z,1510683871.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:31.742Z,1510683871.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-11-14T18:24:32.167Z,1510683872.167 [PNI_TCM](DEBUG): LCB error: So