2017-11-10T04:37:37.501Z,1510288657.501 [Supervisor](DEBUG): Initializing supervisor.
2017-11-10T04:37:37.504Z,1510288657.504 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2017-11-10T04:37:37.504Z,1510288657.504 [SyncHandler](INFO): Protected caller Thread ID is 798
2017-11-10T04:37:37.504Z,1510288657.504 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2017-11-10T04:37:37.505Z,1510288657.505 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2017-11-10T04:37:37.506Z,1510288657.506 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 799
2017-11-10T04:37:37.508Z,1510288657.508 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2017-11-10T04:37:37.520Z,1510288657.520 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2017-11-10T04:37:37.521Z,1510288657.521 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2017-11-10T04:37:37.521Z,1510288657.521 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 800
2017-11-10T04:37:37.522Z,1510288657.522 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2017-11-10T04:37:37.523Z,1510288657.523 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2017-11-10T04:37:37.523Z,1510288657.523 [logger ThreadHandler](INFO): Protected caller Thread ID is 801
2017-11-10T04:37:37.525Z,1510288657.525 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2017-11-10T04:37:37.525Z,1510288657.525 [Supervisor](INFO): Looking for Config files in directory: Config/
2017-11-10T04:37:37.531Z,1510288657.531 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2017-11-10T04:37:37.856Z,1510288657.856 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2017-11-10T04:37:37.858Z,1510288657.858 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2017-11-10T04:37:37.953Z,1510288657.953 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2017-11-10T04:37:37.954Z,1510288657.954 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2017-11-10T04:37:38.386Z,1510288658.386 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2017-11-10T04:37:38.388Z,1510288658.388 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2017-11-10T04:37:38.486Z,1510288658.486 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2017-11-10T04:37:38.487Z,1510288658.487 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2017-11-10T04:37:38.675Z,1510288658.675 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2017-11-10T04:37:38.675Z,1510288658.675 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2017-11-10T04:37:38.949Z,1510288658.949 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2017-11-10T04:37:38.950Z,1510288658.950 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2017-11-10T04:37:39.140Z,1510288659.140 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2017-11-10T04:37:39.141Z,1510288659.141 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2017-11-10T04:37:39.222Z,1510288659.222 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2017-11-10T04:37:39.349Z,1510288659.349 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2017-11-10T04:37:39.350Z,1510288659.350 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2017-11-10T04:37:39.691Z,1510288659.691 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2017-11-10T04:37:39.691Z,1510288659.691 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2017-11-10T04:37:40.124Z,1510288660.124 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2017-11-10T04:37:40.125Z,1510288660.125 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2017-11-10T04:37:40.321Z,1510288660.321 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2017-11-10T04:37:40.322Z,1510288660.322 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2017-11-10T04:37:40.614Z,1510288660.614 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2017-11-10T04:37:40.615Z,1510288660.615 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2017-11-10T04:37:40.718Z,1510288660.718 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2017-11-10T04:37:40.719Z,1510288660.719 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2017-11-10T04:37:40.857Z,1510288660.857 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2017-11-10T04:37:40.859Z,1510288660.859 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-opah/
2017-11-10T04:37:40.864Z,1510288660.864 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Control.cfg
2017-11-10T04:37:41.022Z,1510288661.022 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/secure.cfg
2017-11-10T04:37:41.636Z,1510288661.636 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Simulator.cfg
2017-11-10T04:37:41.944Z,1510288661.944 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/BIT.cfg
2017-11-10T04:37:42.052Z,1510288662.052 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Battery.cfg
2017-11-10T04:37:42.274Z,1510288662.274 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2017-11-10T04:37:42.275Z,1510288662.275 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Science.cfg
2017-11-10T04:37:42.416Z,1510288662.416 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/logger.cfg
2017-11-10T04:37:42.511Z,1510288662.511 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Sensor.cfg
2017-11-10T04:37:42.669Z,1510288662.669 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/vehicle.cfg
2017-11-10T04:37:42.830Z,1510288662.830 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Navigation.cfg
2017-11-10T04:37:42.931Z,1510288662.931 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Servo.cfg
2017-11-10T04:37:43.035Z,1510288663.035 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2017-11-10T04:37:43.039Z,1510288663.039 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2017-11-10T04:37:43.194Z,1510288663.194 [SBIT](DEBUG): Construct Startup Built In Test.
2017-11-10T04:37:43.224Z,1510288663.224 [SBIT] Loaded
2017-11-10T04:37:43.224Z,1510288663.224 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2017-11-10T04:37:43.225Z,1510288663.225 [IBIT](DEBUG): Construct Initiated Built In Test.
2017-11-10T04:37:43.251Z,1510288663.251 [IBIT] Loaded
2017-11-10T04:37:43.252Z,1510288663.252 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2017-11-10T04:37:43.255Z,1510288663.255 [CBIT](DEBUG): Construct Continuous Built In Test.
2017-11-10T04:37:43.401Z,1510288663.401 [CBIT] Loaded
2017-11-10T04:37:43.401Z,1510288663.401 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2017-11-10T04:37:43.401Z,1510288663.401 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2017-11-10T04:37:43.402Z,1510288663.402 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2017-11-10T04:37:43.674Z,1510288663.674 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2017-11-10T04:37:43.676Z,1510288663.676 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2017-11-10T04:37:44.207Z,1510288664.207 [DataOverHttps] Loaded
2017-11-10T04:37:44.208Z,1510288664.208 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2017-11-10T04:37:44.231Z,1510288664.231 [Depth_Keller] Loaded
2017-11-10T04:37:44.232Z,1510288664.232 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2017-11-10T04:37:44.237Z,1510288664.237 [DropWeight] Loaded
2017-11-10T04:37:44.237Z,1510288664.237 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2017-11-10T04:37:44.323Z,1510288664.323 [NAL9602] Loaded
2017-11-10T04:37:44.324Z,1510288664.324 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2017-11-10T04:37:44.332Z,1510288664.332 [Onboard] Loaded
2017-11-10T04:37:44.332Z,1510288664.332 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2017-11-10T04:37:44.339Z,1510288664.339 [Radio_Surface] Loaded
2017-11-10T04:37:44.339Z,1510288664.339 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2017-11-10T04:37:44.340Z,1510288664.340 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 407BC4E0
2017-11-10T04:37:44.341Z,1510288664.341 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 880
2017-11-10T04:37:44.347Z,1510288664.347 [SCPI] Loaded
2017-11-10T04:37:44.347Z,1510288664.347 [ComponentRegistry](DEBUG): SyncComponent "SCPI" handled in the control thread.
2017-11-10T04:37:44.498Z,1510288664.498 [PNI_TCM] Loaded
2017-11-10T04:37:44.499Z,1510288664.499 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2017-11-10T04:37:44.559Z,1510288664.559 [Rowe_600LCM] Loaded
2017-11-10T04:37:44.559Z,1510288664.559 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2017-11-10T04:37:44.560Z,1510288664.560 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 407EC4E0
2017-11-10T04:37:44.561Z,1510288664.561 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 881
2017-11-10T04:37:46.271Z,1510288666.271 [BPC1] Loaded
2017-11-10T04:37:46.271Z,1510288666.271 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2017-11-10T04:37:46.271Z,1510288666.271 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2017-11-10T04:37:46.272Z,1510288666.272 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2017-11-10T04:37:46.697Z,1510288666.697 [Aanderaa_O2] Loaded
2017-11-10T04:37:46.698Z,1510288666.698 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2017-11-10T04:37:46.732Z,1510288666.732 [CTD_Seabird] Loaded
2017-11-10T04:37:46.732Z,1510288666.732 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2017-11-10T04:37:46.733Z,1510288666.733 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 408754E0
2017-11-10T04:37:46.734Z,1510288666.734 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 882
2017-11-10T04:37:46.748Z,1510288666.748 [PAR_Licor] Loaded
2017-11-10T04:37:46.748Z,1510288666.748 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2017-11-10T04:37:46.796Z,1510288666.796 [WetLabsBB2FL] Loaded
2017-11-10T04:37:46.796Z,1510288666.796 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2017-11-10T04:37:46.797Z,1510288666.797 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 408A54E0
2017-11-10T04:37:46.798Z,1510288666.798 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 883
2017-11-10T04:37:46.798Z,1510288666.798 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2017-11-10T04:37:46.799Z,1510288666.799 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2017-11-10T04:37:46.887Z,1510288666.887 [VerticalControl](DEBUG): Construct VerticalControl.
2017-11-10T04:37:46.984Z,1510288666.984 [VerticalControl] Loaded
2017-11-10T04:37:46.985Z,1510288666.985 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2017-11-10T04:37:46.985Z,1510288666.985 [HorizontalControl](DEBUG): Construct HorizontalControl.
2017-11-10T04:37:47.046Z,1510288667.046 [HorizontalControl] Loaded
2017-11-10T04:37:47.046Z,1510288667.046 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2017-11-10T04:37:47.047Z,1510288667.047 [SpeedControl](DEBUG): Construct SpeedControl.
2017-11-10T04:37:47.052Z,1510288667.052 [SpeedControl] Loaded
2017-11-10T04:37:47.052Z,1510288667.052 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2017-11-10T04:37:47.053Z,1510288667.053 [LoopControl](DEBUG): Construct LoopControl.
2017-11-10T04:37:47.054Z,1510288667.054 [LoopControl] Loaded
2017-11-10T04:37:47.054Z,1510288667.054 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2017-11-10T04:37:47.054Z,1510288667.054 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2017-11-10T04:37:47.055Z,1510288667.055 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2017-11-10T04:37:47.079Z,1510288667.079 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2017-11-10T04:37:47.080Z,1510288667.080 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2017-11-10T04:37:47.199Z,1510288667.199 [BuoyancyServo] Loaded
2017-11-10T04:37:47.199Z,1510288667.199 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2017-11-10T04:37:47.210Z,1510288667.210 [ElevatorServo] Loaded
2017-11-10T04:37:47.210Z,1510288667.210 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2017-11-10T04:37:47.221Z,1510288667.221 [MassServo] Loaded
2017-11-10T04:37:47.221Z,1510288667.221 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2017-11-10T04:37:47.232Z,1510288667.232 [RudderServo] Loaded
2017-11-10T04:37:47.233Z,1510288667.233 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2017-11-10T04:37:47.244Z,1510288667.244 [ThrusterServo] Loaded
2017-11-10T04:37:47.244Z,1510288667.244 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2017-11-10T04:37:47.244Z,1510288667.244 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2017-11-10T04:37:47.245Z,1510288667.245 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2017-11-10T04:37:47.281Z,1510288667.281 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2017-11-10T04:37:47.282Z,1510288667.282 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2017-11-10T04:37:47.317Z,1510288667.317 [DepthRateCalculator] Loaded
2017-11-10T04:37:47.318Z,1510288667.318 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2017-11-10T04:37:47.323Z,1510288667.323 [PitchRateCalculator] Loaded
2017-11-10T04:37:47.323Z,1510288667.323 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2017-11-10T04:37:47.339Z,1510288667.339 [SpeedCalculator] Loaded
2017-11-10T04:37:47.339Z,1510288667.339 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2017-11-10T04:37:47.360Z,1510288667.360 [TempGradientCalculator] Loaded
2017-11-10T04:37:47.360Z,1510288667.360 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2017-11-10T04:37:47.375Z,1510288667.375 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2017-11-10T04:37:47.376Z,1510288667.376 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2017-11-10T04:37:47.381Z,1510288667.381 [YawRateCalculator] Loaded
2017-11-10T04:37:47.381Z,1510288667.381 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2017-11-10T04:37:47.382Z,1510288667.382 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2017-11-10T04:37:47.382Z,1510288667.382 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2017-11-10T04:37:47.506Z,1510288667.506 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2017-11-10T04:37:47.506Z,1510288667.506 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2017-11-10T04:37:47.617Z,1510288667.617 [DeadReckonUsingMultipleVelocitySources] Loaded
2017-11-10T04:37:47.617Z,1510288667.617 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2017-11-10T04:37:47.671Z,1510288667.671 [DeadReckonUsingSpeedCalculator] Loaded
2017-11-10T04:37:47.672Z,1510288667.672 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2017-11-10T04:37:47.725Z,1510288667.725 [DeadReckonWithRespectToSeafloor] Loaded
2017-11-10T04:37:47.726Z,1510288667.726 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2017-11-10T04:37:47.742Z,1510288667.742 [NavChart] Loaded
2017-11-10T04:37:47.742Z,1510288667.742 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2017-11-10T04:37:47.746Z,1510288667.746 [UniversalFixResidualReporter] Loaded
2017-11-10T04:37:47.746Z,1510288667.746 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2017-11-10T04:37:47.747Z,1510288667.747 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2017-11-10T04:37:47.747Z,1510288667.747 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2017-11-10T04:37:47.868Z,1510288667.868 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2017-11-10T04:37:47.868Z,1510288667.868 [StratificationFrontDetector](DEBUG): (re)initializing
2017-11-10T04:37:47.868Z,1510288667.868 [StratificationFrontDetector] Loaded
2017-11-10T04:37:47.868Z,1510288667.868 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2017-11-10T04:37:47.869Z,1510288667.869 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2017-11-10T04:37:47.873Z,1510288667.873 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2017-11-10T04:37:47.873Z,1510288667.873 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2017-11-10T04:37:47.880Z,1510288667.880 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2017-11-10T04:37:47.881Z,1510288667.881 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A164E0
2017-11-10T04:37:47.881Z,1510288667.881 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 884
2017-11-10T04:37:47.886Z,1510288667.886 [Supervisor](INFO): Main Thread ID is 794
2017-11-10T04:37:47.886Z,1510288667.886 [Supervisor](DEBUG): Running supervisor.
2017-11-10T04:37:47.887Z,1510288667.887 [CommandLine ThreadHandler](INFO): Handler Thread ID is 885
2017-11-10T04:37:47.889Z,1510288667.889 [controlThread ThreadHandler](INFO): Handler Thread ID is 886
2017-11-10T04:37:47.890Z,1510288667.890 [controlThread](DEBUG): Initializing ControlThread
2017-11-10T04:37:47.891Z,1510288667.891 [SBIT](INFO): Initialize SBIT Component.
2017-11-10T04:37:47.891Z,1510288667.891 [SBIT](IMPORTANT): git: 2017-10-26-27-g28caa4f
2017-11-10T04:37:47.891Z,1510288667.891 [SBIT](INFO): git hash: 28caa4f52d4014465ae2cbbbbc56c9b8302a605b
2017-11-10T04:37:47.892Z,1510288667.892 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2017-11-10T04:37:47.893Z,1510288667.893 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #17 PREEMPT Fri Oct 6 17:22:04 PDT 2017
2017-11-10T04:37:47.894Z,1510288667.894 [SBIT](INFO): Beginning SBIT in 59.000000 seconds.
2017-11-10T04:37:47.894Z,1510288667.894 [IBIT](INFO): Initialize IBIT Component.
2017-11-10T04:37:47.895Z,1510288667.895 [CBIT](DEBUG): Initialize CBIT Component.
2017-11-10T04:37:47.895Z,1510288667.895 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2017-11-10T04:37:47.896Z,1510288667.896 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2017-11-10T04:37:47.897Z,1510288667.897 [logger ThreadHandler](INFO): Handler Thread ID is 887
2017-11-10T04:37:47.925Z,1510288667.925 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 888
2017-11-10T04:37:47.931Z,1510288667.931 [Radio_Surface](INFO): Powering up
2017-11-10T04:37:47.937Z,1510288667.937 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 889
2017-11-10T04:37:47.938Z,1510288667.938 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:37:47.938Z,1510288667.938 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:37:47.985Z,1510288667.985 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2017-11-10T04:37:48.038Z,1510288668.038 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2017-11-10T04:37:48.038Z,1510288668.038 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2017-11-10T04:37:48.039Z,1510288668.039 [LoopControl](DEBUG): Initialize LoopControlComponent.
2017-11-10T04:37:48.040Z,1510288668.040 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-11-10T04:37:48.041Z,1510288668.041 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2017-11-10T04:37:48.041Z,1510288668.041 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2017-11-10T04:37:48.041Z,1510288668.041 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2017-11-10T04:37:48.042Z,1510288668.042 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2017-11-10T04:37:48.042Z,1510288668.042 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2017-11-10T04:37:48.043Z,1510288668.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-10T04:37:48.044Z,1510288668.044 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T04:37:48.044Z,1510288668.044 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T04:37:48.044Z,1510288668.044 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-10T04:37:48.045Z,1510288668.045 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T04:37:48.045Z,1510288668.045 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T04:37:48.045Z,1510288668.045 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T04:37:48.046Z,1510288668.046 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T04:37:48.046Z,1510288668.046 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T04:37:48.047Z,1510288668.047 [NavChart](DEBUG): Initialize NavChart Navigation.
2017-11-10T04:37:48.047Z,1510288668.047 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2017-11-10T04:37:48.048Z,1510288668.048 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2017-11-10T04:37:48.060Z,1510288668.060 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 890
2017-11-10T04:37:48.060Z,1510288668.060 [CTD_Seabird](INFO): Initializing
2017-11-10T04:37:48.135Z,1510288668.135 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 891
2017-11-10T04:37:48.142Z,1510288668.142 [WetLabsBB2FL](INFO): Powering down
2017-11-10T04:37:48.189Z,1510288668.189 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2017-11-10T04:37:48.193Z,1510288668.193 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 893
2017-11-10T04:37:48.201Z,1510288668.201 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2017-11-10T04:37:48.201Z,1510288668.201 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2017-11-10T04:37:48.201Z,1510288668.201 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2017-11-10T04:37:48.201Z,1510288668.201 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2017-11-10T04:37:48.201Z,1510288668.201 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2017-11-10T04:37:48.202Z,1510288668.202 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2017-11-10T04:37:48.202Z,1510288668.202 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2017-11-10T04:37:48.202Z,1510288668.202 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2017-11-10T04:37:48.202Z,1510288668.202 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2017-11-10T04:37:48.203Z,1510288668.203 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2017-11-10T04:37:48.203Z,1510288668.203 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2017-11-10T04:37:48.203Z,1510288668.203 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2017-11-10T04:37:48.203Z,1510288668.203 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2017-11-10T04:37:48.203Z,1510288668.203 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2017-11-10T04:37:48.204Z,1510288668.204 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2017-11-10T04:37:48.204Z,1510288668.204 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2017-11-10T04:37:48.302Z,1510288668.302 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2017-11-10T04:37:48.303Z,1510288668.303 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2017-11-10T04:37:48.404Z,1510288668.404 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:37:48.404Z,1510288668.404 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T04:37:48.413Z,1510288668.413 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:37:48.423Z,1510288668.423 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2017-11-10T04:37:48.424Z,1510288668.424 [Default:A.Wait](DEBUG): Construct Wait.
2017-11-10T04:37:48.439Z,1510288668.439 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2017-11-10T04:37:48.473Z,1510288668.473 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2017-11-10T04:37:48.475Z,1510288668.475 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2017-11-10T04:37:48.498Z,1510288668.498 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-11-10T04:37:48.498Z,1510288668.498 [CTD_Seabird](INFO): Powering down
2017-11-10T04:37:48.523Z,1510288668.523 [Default:E.Execute](DEBUG): Construct Execute.
2017-11-10T04:37:48.542Z,1510288668.542 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2017-11-10T04:37:48.548Z,1510288668.548 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,SCPI,PNI_TCM,BPC1,Aanderaa_O2,PAR_Licor,Depth_Keller,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2017-11-10T04:37:48.580Z,1510288668.580 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2017-11-10T04:37:48.634Z,1510288668.634 [Depth_Keller](ERROR): Pressure reading out of range: 1658.386841 decibar
2017-11-10T04:37:48.841Z,1510288668.841 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:37:48.958Z,1510288668.958 [DepthRateCalculator](ERROR): Depth measurement is not active
2017-11-10T04:37:49.091Z,1510288669.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:49.091Z,1510288669.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-10T04:37:49.143Z,1510288669.143 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:37:49.207Z,1510288669.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:49.228Z,1510288669.228 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:49.253Z,1510288669.253 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:49.349Z,1510288669.349 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-11-10T04:37:49.357Z,1510288669.357 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-11-10T04:37:49.371Z,1510288669.371 [ElevatorServo](DEBUG): Initializing EZServoServo.
2017-11-10T04:37:49.377Z,1510288669.377 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2017-11-10T04:37:49.383Z,1510288669.383 [MassServo](DEBUG): Initializing EZServoServo.
2017-11-10T04:37:49.389Z,1510288669.389 [MassServo](DEBUG): Initializing MassServo.
2017-11-10T04:37:49.403Z,1510288669.403 [RudderServo](DEBUG): Initializing EZServoServo.
2017-11-10T04:37:49.409Z,1510288669.409 [RudderServo](DEBUG): Initializing RudderServo.
2017-11-10T04:37:49.422Z,1510288669.422 [ThrusterServo](DEBUG): Initializing EZServoServo.
2017-11-10T04:37:49.429Z,1510288669.429 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2017-11-10T04:37:49.472Z,1510288669.472 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:37:49.748Z,1510288669.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:49.748Z,1510288669.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-10T04:37:49.749Z,1510288669.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:49.757Z,1510288669.757 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:49.758Z,1510288669.758 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:49.950Z,1510288669.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:49.951Z,1510288669.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-10T04:37:49.952Z,1510288669.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:49.953Z,1510288669.953 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:49.954Z,1510288669.954 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:50.293Z,1510288670.293 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2017-11-10T04:37:50.293Z,1510288670.293 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2017-11-10T04:37:50.293Z,1510288670.293 [BuoyancyServo] Communications Fault, FailCount= 1
2017-11-10T04:37:50.293Z,1510288670.293 [BuoyancyServo](ERROR): Communications Fault
2017-11-10T04:37:50.500Z,1510288670.500 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:37:50.500Z,1510288670.500 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T04:37:50.501Z,1510288670.501 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2017-11-10T04:37:50.592Z,1510288670.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:50.592Z,1510288670.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-10T04:37:50.593Z,1510288670.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:50.601Z,1510288670.601 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:50.602Z,1510288670.602 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:50.614Z,1510288670.614 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2017-11-10T04:37:50.615Z,1510288670.615 [BuoyancyServo](INFO): Powering down
2017-11-10T04:37:50.777Z,1510288670.777 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:37:50.777Z,1510288670.777 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:37:50.777Z,1510288670.777 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:37:50.777Z,1510288670.777 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T04:37:50.777Z,1510288670.777 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:37:50.954Z,1510288670.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:50.955Z,1510288670.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-10T04:37:50.957Z,1510288670.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:50.957Z,1510288670.957 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:50.958Z,1510288670.958 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:50.983Z,1510288670.983 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:37:51.181Z,1510288671.181 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:37:51.385Z,1510288671.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:51.385Z,1510288671.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-10T04:37:51.386Z,1510288671.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:51.387Z,1510288671.387 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:51.388Z,1510288671.388 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:51.423Z,1510288671.423 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:37:51.780Z,1510288671.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:51.780Z,1510288671.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-10T04:37:51.781Z,1510288671.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:51.782Z,1510288671.782 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:51.783Z,1510288671.783 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:52.265Z,1510288672.265 [Aanderaa_O2](INFO): Powering down
2017-11-10T04:37:52.314Z,1510288672.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:52.314Z,1510288672.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-10T04:37:52.315Z,1510288672.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:52.316Z,1510288672.316 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:52.325Z,1510288672.325 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-11-10T04:37:52.581Z,1510288672.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-10T04:37:52.582Z,1510288672.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:52.701Z,1510288672.701 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:37:52.701Z,1510288672.701 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T04:37:52.702Z,1510288672.702 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2017-11-10T04:37:52.702Z,1510288672.702 [BuoyancyServo] No Fault, FailCount= 1
2017-11-10T04:37:52.987Z,1510288672.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-10T04:37:52.997Z,1510288672.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:53.011Z,1510288673.011 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-11-10T04:37:53.037Z,1510288673.037 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:37:53.037Z,1510288673.037 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:37:53.038Z,1510288673.038 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:37:53.038Z,1510288673.038 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T04:37:53.038Z,1510288673.038 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:37:53.130Z,1510288673.130 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-11-10T04:37:53.337Z,1510288673.337 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:37:53.430Z,1510288673.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-11-10T04:37:53.431Z,1510288673.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:53.441Z,1510288673.441 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:37:53.797Z,1510288673.797 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:37:53.873Z,1510288673.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:54.242Z,1510288674.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:54.614Z,1510288674.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:55.018Z,1510288675.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:55.065Z,1510288675.065 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:37:55.065Z,1510288675.065 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T04:37:55.413Z,1510288675.413 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:37:55.414Z,1510288675.414 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:37:55.414Z,1510288675.414 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:37:55.414Z,1510288675.414 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T04:37:55.414Z,1510288675.414 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:37:55.431Z,1510288675.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:55.505Z,1510288675.505 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:37:55.817Z,1510288675.817 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:37:55.884Z,1510288675.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:56.031Z,1510288676.031 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:37:56.231Z,1510288676.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:56.609Z,1510288676.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:57.070Z,1510288677.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:57.420Z,1510288677.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:57.482Z,1510288677.482 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:37:57.482Z,1510288677.482 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T04:37:57.645Z,1510288677.645 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:37:57.645Z,1510288677.645 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:37:57.645Z,1510288677.645 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:37:57.646Z,1510288677.646 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T04:37:57.646Z,1510288677.646 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:37:57.802Z,1510288677.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:57.861Z,1510288677.861 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:37:57.862Z,1510288677.862 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:37:58.049Z,1510288678.049 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:37:58.226Z,1510288678.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:58.309Z,1510288678.309 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:37:58.616Z,1510288678.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:59.025Z,1510288679.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:59.418Z,1510288679.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:37:59.851Z,1510288679.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:00.258Z,1510288680.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:00.643Z,1510288680.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:01.055Z,1510288681.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:01.442Z,1510288681.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:01.809Z,1510288681.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:02.220Z,1510288682.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:02.624Z,1510288682.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:03.004Z,1510288683.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:03.415Z,1510288683.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:03.826Z,1510288683.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:04.243Z,1510288684.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:04.616Z,1510288684.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:05.009Z,1510288685.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:05.417Z,1510288685.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:05.825Z,1510288685.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:06.254Z,1510288686.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:06.655Z,1510288686.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:07.012Z,1510288687.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:07.425Z,1510288687.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:07.922Z,1510288687.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:08.213Z,1510288688.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:08.627Z,1510288688.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:09.022Z,1510288689.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:09.420Z,1510288689.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:09.816Z,1510288689.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:10.258Z,1510288690.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:10.606Z,1510288690.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:11.042Z,1510288691.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:11.413Z,1510288691.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:11.825Z,1510288691.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:12.202Z,1510288692.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:12.642Z,1510288692.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:12.990Z,1510288692.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:13.426Z,1510288693.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:13.823Z,1510288693.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:14.196Z,1510288694.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:14.551Z,1510288694.551 [NAL9602](INFO): Powering up NAL9602
2017-11-10T04:38:14.613Z,1510288694.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:15.030Z,1510288695.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:15.396Z,1510288695.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:15.827Z,1510288695.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:16.238Z,1510288696.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:16.607Z,1510288696.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:17.000Z,1510288697.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:17.402Z,1510288697.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:17.798Z,1510288697.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:18.215Z,1510288698.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:18.642Z,1510288698.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:19.001Z,1510288699.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:19.403Z,1510288699.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:19.833Z,1510288699.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:20.209Z,1510288700.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:20.603Z,1510288700.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:21.036Z,1510288701.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:21.414Z,1510288701.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:21.810Z,1510288701.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:22.212Z,1510288702.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:22.618Z,1510288702.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:23.008Z,1510288703.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:23.403Z,1510288703.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:23.810Z,1510288703.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:24.250Z,1510288704.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:24.596Z,1510288704.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:25.008Z,1510288705.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:25.417Z,1510288705.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:25.750Z,1510288705.750 [NAL9602](INFO): NAL9602 initialized
2017-11-10T04:38:25.846Z,1510288705.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:26.273Z,1510288706.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:26.614Z,1510288706.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:27.016Z,1510288707.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:27.432Z,1510288707.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:27.815Z,1510288707.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:28.208Z,1510288708.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:28.600Z,1510288708.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:29.052Z,1510288709.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:29.442Z,1510288709.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:29.828Z,1510288709.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:30.199Z,1510288710.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:30.612Z,1510288710.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:30.996Z,1510288710.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:31.405Z,1510288711.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:31.837Z,1510288711.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:32.201Z,1510288712.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:32.644Z,1510288712.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:33.004Z,1510288713.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:33.416Z,1510288713.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:33.812Z,1510288713.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:34.213Z,1510288714.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:34.618Z,1510288714.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:35.026Z,1510288715.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:35.431Z,1510288715.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:35.820Z,1510288715.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:36.218Z,1510288716.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:36.627Z,1510288716.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:36.991Z,1510288716.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:37.396Z,1510288717.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:37.828Z,1510288717.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:38.218Z,1510288718.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:38.598Z,1510288718.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:39.030Z,1510288719.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:39.404Z,1510288719.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:39.841Z,1510288719.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:40.250Z,1510288720.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:40.619Z,1510288720.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:41.031Z,1510288721.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:41.399Z,1510288721.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:41.790Z,1510288721.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:42.217Z,1510288722.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:42.592Z,1510288722.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:42.995Z,1510288722.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:43.392Z,1510288723.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:43.817Z,1510288723.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:44.200Z,1510288724.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:44.600Z,1510288724.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:45.003Z,1510288725.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:45.418Z,1510288725.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:45.803Z,1510288725.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:46.193Z,1510288726.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:46.594Z,1510288726.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:47.021Z,1510288727.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:47.392Z,1510288727.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:47.403Z,1510288727.403 [SBIT](IMPORTANT): Beginning Startup BIT
2017-11-10T04:38:47.407Z,1510288727.407 [CBIT](IMPORTANT): Beginning ground fault scan
2017-11-10T04:38:47.791Z,1510288727.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:48.196Z,1510288728.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:48.623Z,1510288728.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:49.003Z,1510288729.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:49.404Z,1510288729.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:49.954Z,1510288729.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:50.356Z,1510288730.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:50.751Z,1510288730.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:51.139Z,1510288731.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:51.535Z,1510288731.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:51.964Z,1510288731.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:52.355Z,1510288732.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:52.738Z,1510288732.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:53.138Z,1510288733.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:53.571Z,1510288733.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:53.940Z,1510288733.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:54.360Z,1510288734.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:54.752Z,1510288734.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:55.188Z,1510288735.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:55.560Z,1510288735.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:55.951Z,1510288735.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:56.345Z,1510288736.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:56.745Z,1510288736.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:57.146Z,1510288737.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:57.545Z,1510288737.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:57.949Z,1510288737.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:58.346Z,1510288738.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:58.406Z,1510288738.406 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.040366
CHAN A1 (24V): -0.047457
CHAN A2 (12V): 0.007195
CHAN A3 (5V): -0.029910
CHAN B0 (3.3V): -0.003933
CHAN B1 (3.15aV): -0.003254
CHAN B2 (3.15bV): -0.003296
CHAN B3 (GND): -0.007413
OPEN: 0.003435
Full Scale Calc: 4.765 mA, -1.589 mA
2017-11-10T04:38:58.740Z,1510288738.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:59.144Z,1510288739.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:59.545Z,1510288739.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:38:59.953Z,1510288739.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:00.346Z,1510288740.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:00.755Z,1510288740.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:01.149Z,1510288741.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:01.545Z,1510288741.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:01.946Z,1510288741.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:02.344Z,1510288742.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:02.744Z,1510288742.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:03.365Z,1510288743.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:03.724Z,1510288743.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:04.146Z,1510288744.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:04.542Z,1510288744.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:04.957Z,1510288744.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:05.350Z,1510288745.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:05.758Z,1510288745.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:06.150Z,1510288746.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:06.530Z,1510288746.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:06.931Z,1510288746.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:07.329Z,1510288747.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:07.732Z,1510288747.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:08.127Z,1510288748.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:08.527Z,1510288748.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:08.960Z,1510288748.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:09.331Z,1510288749.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:09.726Z,1510288749.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:10.160Z,1510288750.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:10.560Z,1510288750.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:10.954Z,1510288750.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:11.356Z,1510288751.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:11.756Z,1510288751.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:12.136Z,1510288752.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:12.530Z,1510288752.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:12.930Z,1510288752.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:13.332Z,1510288753.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:13.731Z,1510288753.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:14.130Z,1510288754.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:14.532Z,1510288754.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:14.931Z,1510288754.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:15.382Z,1510288755.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:15.754Z,1510288755.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:16.172Z,1510288756.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:16.558Z,1510288756.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:16.964Z,1510288756.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:17.332Z,1510288757.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:17.727Z,1510288757.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:18.127Z,1510288758.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:18.532Z,1510288758.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:18.930Z,1510288758.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:19.331Z,1510288759.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:19.730Z,1510288759.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:20.130Z,1510288760.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:20.561Z,1510288760.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:20.957Z,1510288760.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:21.341Z,1510288761.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:21.742Z,1510288761.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:22.135Z,1510288762.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:22.539Z,1510288762.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:22.932Z,1510288762.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:23.335Z,1510288763.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:23.733Z,1510288763.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:24.132Z,1510288764.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:24.578Z,1510288764.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:24.935Z,1510288764.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:25.359Z,1510288765.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:25.743Z,1510288765.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:26.137Z,1510288766.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:26.544Z,1510288766.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:26.937Z,1510288766.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:27.339Z,1510288767.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:27.730Z,1510288767.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:28.135Z,1510288768.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:28.539Z,1510288768.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:28.934Z,1510288768.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:29.335Z,1510288769.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:29.736Z,1510288769.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:30.265Z,1510288770.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:30.643Z,1510288770.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:31.070Z,1510288771.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:31.470Z,1510288771.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:31.880Z,1510288771.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:32.274Z,1510288772.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:32.643Z,1510288772.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:33.043Z,1510288773.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:33.448Z,1510288773.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:33.843Z,1510288773.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:34.242Z,1510288774.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:34.642Z,1510288774.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:35.052Z,1510288775.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:35.443Z,1510288775.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:35.842Z,1510288775.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:36.276Z,1510288776.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:36.668Z,1510288776.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:37.092Z,1510288777.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:37.499Z,1510288777.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:37.849Z,1510288777.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:38.281Z,1510288778.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:38.646Z,1510288778.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:39.079Z,1510288779.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:39.446Z,1510288779.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:39.845Z,1510288779.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:40.247Z,1510288780.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:40.651Z,1510288780.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:41.041Z,1510288781.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:41.459Z,1510288781.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:41.497Z,1510288781.497 [SBIT](IMPORTANT): SBIT PASSED
2017-11-10T04:39:41.854Z,1510288781.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:41.857Z,1510288781.857 [MissionManager](IMPORTANT): Started mission Startup
2017-11-10T04:39:41.858Z,1510288781.858 [Startup] Running Loop=1
2017-11-10T04:39:41.858Z,1510288781.858 [Startup](DEBUG): Aggregate::initialize Startup
2017-11-10T04:39:41.858Z,1510288781.858 [Startup:A.GoToSurface] Running Loop=1
2017-11-10T04:39:41.858Z,1510288781.858 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-11-10T04:39:41.859Z,1510288781.859 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-11-10T04:39:41.859Z,1510288781.859 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-11-10T04:39:41.859Z,1510288781.859 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-11-10T04:39:41.860Z,1510288781.860 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-11-10T04:39:41.860Z,1510288781.860 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-11-10T04:39:41.886Z,1510288781.886 [Startup:StartupSatComms] Running Loop=1
2017-11-10T04:39:41.886Z,1510288781.886 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2017-11-10T04:39:41.886Z,1510288781.886 [Startup:StartupSatComms:A] Running Loop=1
2017-11-10T04:39:42.242Z,1510288782.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:42.246Z,1510288782.246 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2017-11-10T04:39:42.650Z,1510288782.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:43.051Z,1510288783.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:43.445Z,1510288783.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:43.850Z,1510288783.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:44.259Z,1510288784.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:44.658Z,1510288784.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:45.059Z,1510288785.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:45.458Z,1510288785.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:45.843Z,1510288785.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:46.251Z,1510288786.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:46.647Z,1510288786.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:47.047Z,1510288787.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:47.469Z,1510288787.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:47.851Z,1510288787.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:48.246Z,1510288788.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:48.651Z,1510288788.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:49.047Z,1510288789.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:49.464Z,1510288789.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:49.863Z,1510288789.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:50.262Z,1510288790.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:50.659Z,1510288790.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:51.056Z,1510288791.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:51.451Z,1510288791.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:51.845Z,1510288791.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:52.251Z,1510288792.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:52.651Z,1510288792.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:53.048Z,1510288793.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:53.448Z,1510288793.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:53.853Z,1510288793.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:54.256Z,1510288794.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:54.663Z,1510288794.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:55.068Z,1510288795.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:55.461Z,1510288795.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:55.860Z,1510288795.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:56.252Z,1510288796.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:56.647Z,1510288796.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:57.052Z,1510288797.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:57.449Z,1510288797.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:57.848Z,1510288797.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:58.251Z,1510288798.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:58.650Z,1510288798.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:59.072Z,1510288799.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:59.472Z,1510288799.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:39:59.863Z,1510288799.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:00.302Z,1510288800.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:00.663Z,1510288800.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:01.103Z,1510288801.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:01.452Z,1510288801.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:01.852Z,1510288801.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:02.254Z,1510288802.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:02.653Z,1510288802.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:03.053Z,1510288803.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:03.459Z,1510288803.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:03.856Z,1510288803.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:04.257Z,1510288804.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:04.658Z,1510288804.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:05.066Z,1510288805.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:05.453Z,1510288805.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:05.863Z,1510288805.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:06.260Z,1510288806.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:06.654Z,1510288806.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:07.061Z,1510288807.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:07.457Z,1510288807.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:07.860Z,1510288807.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:08.235Z,1510288808.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:08.664Z,1510288808.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:09.038Z,1510288809.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:09.474Z,1510288809.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:09.842Z,1510288809.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:10.247Z,1510288810.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:10.642Z,1510288810.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:11.042Z,1510288811.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:11.441Z,1510288811.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:11.851Z,1510288811.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:12.242Z,1510288812.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:12.647Z,1510288812.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:13.038Z,1510288813.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:13.443Z,1510288813.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:13.848Z,1510288813.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:14.272Z,1510288814.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:14.670Z,1510288814.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:17.744Z,1510288817.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:17.879Z,1510288817.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:18.238Z,1510288818.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:18.595Z,1510288818.595 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.005012
2017-11-10T04:40:18.652Z,1510288818.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:19.044Z,1510288819.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:19.430Z,1510288819.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:19.839Z,1510288819.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:20.244Z,1510288820.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:20.643Z,1510288820.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:21.036Z,1510288821.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:21.476Z,1510288821.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:21.864Z,1510288821.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:22.237Z,1510288822.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:22.655Z,1510288822.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:23.048Z,1510288823.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:23.488Z,1510288823.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:23.849Z,1510288823.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:24.246Z,1510288824.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:24.639Z,1510288824.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:25.035Z,1510288825.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:25.434Z,1510288825.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:25.842Z,1510288825.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:26.241Z,1510288826.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:26.650Z,1510288826.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:27.038Z,1510288827.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:27.438Z,1510288827.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:27.847Z,1510288827.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:28.255Z,1510288828.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:28.646Z,1510288828.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:29.060Z,1510288829.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:29.442Z,1510288829.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:29.836Z,1510288829.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:30.235Z,1510288830.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:30.641Z,1510288830.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:31.041Z,1510288831.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:31.441Z,1510288831.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:31.859Z,1510288831.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:32.240Z,1510288832.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:32.648Z,1510288832.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:33.052Z,1510288833.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:33.440Z,1510288833.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:33.844Z,1510288833.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:34.241Z,1510288834.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:34.644Z,1510288834.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:35.040Z,1510288835.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:35.442Z,1510288835.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:35.844Z,1510288835.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:36.255Z,1510288836.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:36.651Z,1510288836.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:37.044Z,1510288837.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:37.440Z,1510288837.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:37.845Z,1510288837.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:38.240Z,1510288838.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:38.640Z,1510288838.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:39.046Z,1510288839.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:39.444Z,1510288839.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:39.840Z,1510288839.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:40.241Z,1510288840.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:40.641Z,1510288840.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:41.049Z,1510288841.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:41.455Z,1510288841.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:41.855Z,1510288841.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:42.247Z,1510288842.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:42.250Z,1510288842.250 [Startup:StartupSatComms:A](INFO): Timed out from 2017-11-10T04:39:41.9Z
2017-11-10T04:40:42.250Z,1510288842.250 [Startup:StartupSatComms:A] Stopped
2017-11-10T04:40:42.250Z,1510288842.250 [Startup:StartupSatComms:B] Running Loop=1
2017-11-10T04:40:42.645Z,1510288842.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:42.648Z,1510288842.648 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-11-10T04:40:43.721Z,1510288843.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:43.850Z,1510288843.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:46.921Z,1510288846.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:46.957Z,1510288846.957 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171110T005917/Courier0088.lzma
2017-11-10T04:40:47.053Z,1510288847.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:47.416Z,1510288847.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:47.754Z,1510288847.754 [DataOverHttps](INFO): Moved sent file to Logs/20171110T005917/Courier0088.lzma.bak
2017-11-10T04:40:47.754Z,1510288847.754 [DataOverHttps](INFO): SBD MOMSN=5225642
2017-11-10T04:40:47.857Z,1510288847.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:48.628Z,1510288848.628 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:48.628Z,1510288848.628 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-11-10T04:40:48.628Z,1510288848.628 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-11-10T04:40:48.630Z,1510288848.630 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:48.630Z,1510288848.630 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2017-11-10T04:40:48.630Z,1510288848.630 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-11-10T04:40:48.632Z,1510288848.632 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:48.632Z,1510288848.632 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-11-10T04:40:48.632Z,1510288848.632 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T04:40:48.644Z,1510288848.644 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-11-10T04:40:48.644Z,1510288848.644 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-11-10T04:40:48.645Z,1510288848.645 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T04:40:48.788Z,1510288848.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-11-10T04:40:48.789Z,1510288848.789 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-11-10T04:40:48.789Z,1510288848.789 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-11-10T04:40:48.789Z,1510288848.789 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2017-11-10T04:40:48.790Z,1510288848.790 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T04:40:48.790Z,1510288848.790 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-11-10T04:40:51.787Z,1510288851.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-11-10T04:40:51.787Z,1510288851.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T04:40:51.787Z,1510288851.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T04:40:51.788Z,1510288851.788 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-11-10T04:40:51.788Z,1510288851.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T04:40:51.789Z,1510288851.789 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T04:40:51.789Z,1510288851.789 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T04:40:51.789Z,1510288851.789 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T04:40:51.790Z,1510288851.790 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T04:40:51.932Z,1510288851.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-11-10T04:40:51.933Z,1510288851.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:52.335Z,1510288852.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-11-10T04:40:52.336Z,1510288852.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:52.739Z,1510288852.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-11-10T04:40:52.740Z,1510288852.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:53.102Z,1510288853.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-11-10T04:40:53.103Z,1510288853.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:53.512Z,1510288853.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-11-10T04:40:53.513Z,1510288853.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:56.595Z,1510288856.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-11-10T04:40:56.597Z,1510288856.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:56.620Z,1510288856.620 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171110T043544/Courier0000.lzma
2017-11-10T04:40:56.737Z,1510288856.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-11-10T04:40:56.738Z,1510288856.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:57.111Z,1510288857.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-11-10T04:40:57.112Z,1510288857.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:57.421Z,1510288857.421 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043544/Courier0000.lzma.bak
2017-11-10T04:40:57.421Z,1510288857.421 [DataOverHttps](INFO): SBD MOMSN=5225644
2017-11-10T04:40:57.491Z,1510288857.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-11-10T04:40:57.492Z,1510288857.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:58.647Z,1510288858.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-11-10T04:40:58.648Z,1510288858.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:40:58.789Z,1510288858.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2017-11-10T04:40:58.790Z,1510288858.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:01.811Z,1510288861.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-11-10T04:41:01.812Z,1510288861.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:01.947Z,1510288861.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-11-10T04:41:01.948Z,1510288861.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:02.319Z,1510288862.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-11-10T04:41:02.320Z,1510288862.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:02.711Z,1510288862.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-11-10T04:41:02.711Z,1510288862.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:03.102Z,1510288863.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2017-11-10T04:41:03.103Z,1510288863.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:03.507Z,1510288863.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2017-11-10T04:41:03.508Z,1510288863.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:06.613Z,1510288866.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-11-10T04:41:06.614Z,1510288866.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:06.676Z,1510288866.676 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171110T005917/Express0089.lzma
2017-11-10T04:41:06.751Z,1510288866.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2017-11-10T04:41:06.752Z,1510288866.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:07.123Z,1510288867.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2017-11-10T04:41:07.124Z,1510288867.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:07.465Z,1510288867.465 [DataOverHttps](INFO): Moved sent file to Logs/20171110T005917/Express0089.lzma.bak
2017-11-10T04:41:07.466Z,1510288867.466 [DataOverHttps](INFO): SBD MOMSN=5225647
2017-11-10T04:41:07.548Z,1510288867.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2017-11-10T04:41:07.549Z,1510288867.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:08.712Z,1510288868.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:08.855Z,1510288868.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:11.913Z,1510288871.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:12.032Z,1510288872.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:12.416Z,1510288872.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:12.840Z,1510288872.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:13.212Z,1510288873.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:13.629Z,1510288873.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:16.685Z,1510288876.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:16.739Z,1510288876.739 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171110T043544/Express0001.lzma
2017-11-10T04:41:16.836Z,1510288876.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:17.199Z,1510288877.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:17.542Z,1510288877.542 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043544/Express0001.lzma.bak
2017-11-10T04:41:17.543Z,1510288877.543 [DataOverHttps](INFO): SBD MOMSN=5225649
2017-11-10T04:41:17.621Z,1510288877.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:18.639Z,1510288878.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:18.775Z,1510288878.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:22.272Z,1510288882.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:22.430Z,1510288882.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:22.756Z,1510288882.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:23.163Z,1510288883.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:23.598Z,1510288883.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:23.953Z,1510288883.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:30.282Z,1510288890.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:30.325Z,1510288890.325 [DataOverHttps](INFO): Sending 700 bytes from file Logs/20171110T043737/Express0001.lzma
2017-11-10T04:41:30.419Z,1510288890.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:30.784Z,1510288890.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:31.121Z,1510288891.121 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0001.lzma.bak
2017-11-10T04:41:31.121Z,1510288891.121 [DataOverHttps](INFO): SBD MOMSN=5225651
2017-11-10T04:41:31.195Z,1510288891.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:32.960Z,1510288892.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:32.987Z,1510288892.987 [Startup:StartupSatComms:B] Stopped
2017-11-10T04:41:32.988Z,1510288892.988 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2017-11-10T04:41:32.988Z,1510288892.988 [Startup:StartupSatComms] Stopped
2017-11-10T04:41:32.988Z,1510288892.988 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2017-11-10T04:41:32.997Z,1510288892.997 [Startup](INFO): Completed Startup
2017-11-10T04:41:32.997Z,1510288892.997 [MissionManager](INFO): Startup is completed.
2017-11-10T04:41:32.997Z,1510288892.997 [MissionManager](INFO): Uninitializing Mission Startup
2017-11-10T04:41:32.997Z,1510288892.997 [Startup] Stopped
2017-11-10T04:41:32.997Z,1510288892.997 [Startup](DEBUG): Aggregate::uninitialize Startup
2017-11-10T04:41:32.998Z,1510288892.998 [Startup:A.GoToSurface] Stopped
2017-11-10T04:41:32.998Z,1510288892.998 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-11-10T04:41:33.108Z,1510288893.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:33.119Z,1510288893.119 [MissionManager](IMPORTANT): Started mission Default
2017-11-10T04:41:33.119Z,1510288893.119 [Default] Running Loop=1
2017-11-10T04:41:33.119Z,1510288893.119 [Default](DEBUG): Aggregate::initialize Default
2017-11-10T04:41:33.120Z,1510288893.120 [Default:B.GoToSurface] Running Loop=1
2017-11-10T04:41:33.120Z,1510288893.120 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-11-10T04:41:33.120Z,1510288893.120 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-11-10T04:41:33.120Z,1510288893.120 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-11-10T04:41:33.129Z,1510288893.129 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-11-10T04:41:33.129Z,1510288893.129 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-11-10T04:41:33.130Z,1510288893.130 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-11-10T04:41:33.130Z,1510288893.130 [Default:A.Wait] Running Loop=1
2017-11-10T04:41:33.130Z,1510288893.130 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-11-10T04:41:39.972Z,1510288899.972 [BPC1](ERROR): Failed to receive battery data
2017-11-10T04:41:39.972Z,1510288899.972 [BPC1] Communications Fault, FailCount= 1
2017-11-10T04:41:39.973Z,1510288899.973 [BPC1](ERROR): Communications Fault
2017-11-10T04:41:40.037Z,1510288900.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:40.078Z,1510288900.078 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T04:41:40.198Z,1510288900.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:40.544Z,1510288900.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:40.951Z,1510288900.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:40.965Z,1510288900.965 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T04:41:40.965Z,1510288900.965 [BPC1] No Fault, FailCount= 1
2017-11-10T04:41:41.384Z,1510288901.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:41.736Z,1510288901.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:42.137Z,1510288902.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:42.536Z,1510288902.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:42.936Z,1510288902.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:43.337Z,1510288903.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:43.737Z,1510288903.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:44.136Z,1510288904.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:44.538Z,1510288904.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:44.944Z,1510288904.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:45.344Z,1510288905.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:45.747Z,1510288905.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:46.144Z,1510288906.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:46.147Z,1510288906.147 [Default:A.Wait](INFO): Done Waiting.
2017-11-10T04:41:46.148Z,1510288906.148 [Default:A.Wait] Stopped
2017-11-10T04:41:46.148Z,1510288906.148 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T04:41:46.536Z,1510288906.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:46.540Z,1510288906.540 [Default:CheckIn] Running Loop=1
2017-11-10T04:41:46.540Z,1510288906.540 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T04:41:46.540Z,1510288906.540 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T04:41:46.937Z,1510288906.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:46.941Z,1510288906.941 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2017-11-10T04:41:47.336Z,1510288907.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:47.736Z,1510288907.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:48.137Z,1510288908.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:48.536Z,1510288908.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:48.937Z,1510288908.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:49.388Z,1510288909.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:49.756Z,1510288909.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:50.215Z,1510288910.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:50.578Z,1510288910.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:50.961Z,1510288910.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:51.356Z,1510288911.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:51.731Z,1510288911.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:52.127Z,1510288912.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:52.536Z,1510288912.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:52.931Z,1510288912.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:53.328Z,1510288913.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:53.725Z,1510288913.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:54.131Z,1510288914.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:54.528Z,1510288914.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:54.939Z,1510288914.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:55.343Z,1510288915.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:55.739Z,1510288915.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:56.131Z,1510288916.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:56.544Z,1510288916.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:56.939Z,1510288916.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:57.337Z,1510288917.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:57.728Z,1510288917.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:58.135Z,1510288918.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:58.537Z,1510288918.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:58.929Z,1510288918.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:59.335Z,1510288919.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:41:59.731Z,1510288919.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:00.131Z,1510288920.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:00.535Z,1510288920.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:00.931Z,1510288920.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:01.338Z,1510288921.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:01.756Z,1510288921.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:02.151Z,1510288922.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:02.537Z,1510288922.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:02.952Z,1510288922.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:03.329Z,1510288923.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:03.745Z,1510288923.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:04.135Z,1510288924.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:04.535Z,1510288924.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:04.941Z,1510288924.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:05.344Z,1510288925.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:05.736Z,1510288925.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:06.137Z,1510288926.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:06.536Z,1510288926.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:06.936Z,1510288926.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:07.337Z,1510288927.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:07.736Z,1510288927.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:08.135Z,1510288928.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:08.537Z,1510288928.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:08.937Z,1510288928.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:09.347Z,1510288929.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:09.747Z,1510288929.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:10.136Z,1510288930.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:10.536Z,1510288930.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:10.937Z,1510288930.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:11.333Z,1510288931.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:11.720Z,1510288931.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:12.149Z,1510288932.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:12.520Z,1510288932.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:12.919Z,1510288932.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:13.324Z,1510288933.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:13.749Z,1510288933.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:14.151Z,1510288934.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:14.557Z,1510288934.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:14.951Z,1510288934.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:15.342Z,1510288935.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:15.723Z,1510288935.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:16.128Z,1510288936.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:16.525Z,1510288936.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:16.927Z,1510288936.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:17.328Z,1510288937.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:17.731Z,1510288937.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:18.132Z,1510288938.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:18.534Z,1510288938.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:18.939Z,1510288938.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:19.338Z,1510288939.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:19.740Z,1510288939.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:20.136Z,1510288940.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:20.543Z,1510288940.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:20.934Z,1510288940.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:21.329Z,1510288941.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:21.729Z,1510288941.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:22.128Z,1510288942.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:22.534Z,1510288942.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:22.930Z,1510288942.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:23.327Z,1510288943.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:23.732Z,1510288943.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:24.192Z,1510288944.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:24.540Z,1510288944.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:24.975Z,1510288944.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:25.348Z,1510288945.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:25.756Z,1510288945.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:26.131Z,1510288946.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:26.536Z,1510288946.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:26.932Z,1510288946.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:27.332Z,1510288947.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:27.733Z,1510288947.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:28.132Z,1510288948.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:28.532Z,1510288948.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:28.933Z,1510288948.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:29.340Z,1510288949.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:29.737Z,1510288949.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:30.139Z,1510288950.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:30.540Z,1510288950.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:30.943Z,1510288950.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:31.337Z,1510288951.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:31.736Z,1510288951.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:32.143Z,1510288952.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:32.520Z,1510288952.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:32.924Z,1510288952.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:33.323Z,1510288953.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:33.727Z,1510288953.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:36.859Z,1510288956.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:36.000Z,1510288957.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:37.354Z,1510288957.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:37.723Z,1510288957.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:38.123Z,1510288958.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:38.521Z,1510288958.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:38.930Z,1510288958.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:39.331Z,1510288959.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:39.721Z,1510288959.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:40.127Z,1510288960.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:40.527Z,1510288960.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:40.924Z,1510288960.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:41.326Z,1510288961.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:41.727Z,1510288961.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:42.127Z,1510288962.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:42.523Z,1510288962.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:42.923Z,1510288962.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:43.335Z,1510288963.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:43.736Z,1510288963.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:44.125Z,1510288964.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:44.529Z,1510288964.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:44.922Z,1510288964.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:45.327Z,1510288965.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:45.727Z,1510288965.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:46.132Z,1510288966.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:46.525Z,1510288966.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:46.922Z,1510288966.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:47.330Z,1510288967.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:47.739Z,1510288967.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:48.143Z,1510288968.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:48.536Z,1510288968.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:48.996Z,1510288968.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:49.333Z,1510288969.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:49.728Z,1510288969.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:50.168Z,1510288970.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:50.525Z,1510288970.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:50.966Z,1510288970.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:51.331Z,1510288971.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:51.731Z,1510288971.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:52.128Z,1510288972.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:52.531Z,1510288972.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:52.937Z,1510288972.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:53.344Z,1510288973.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:53.743Z,1510288973.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:54.141Z,1510288974.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:54.527Z,1510288974.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:54.931Z,1510288974.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:55.325Z,1510288975.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:55.724Z,1510288975.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:56.124Z,1510288976.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:56.525Z,1510288976.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:56.928Z,1510288976.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:57.328Z,1510288977.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:57.734Z,1510288977.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:58.136Z,1510288978.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:58.544Z,1510288978.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:58.936Z,1510288978.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:59.376Z,1510288979.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:42:59.723Z,1510288979.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:00.128Z,1510288980.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:00.523Z,1510288980.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:00.923Z,1510288980.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:01.330Z,1510288981.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:01.723Z,1510288981.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:02.122Z,1510288982.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:02.524Z,1510288982.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:02.927Z,1510288982.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:03.335Z,1510288983.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:03.739Z,1510288983.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:04.123Z,1510288984.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:04.522Z,1510288984.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:04.936Z,1510288984.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:05.344Z,1510288985.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:05.735Z,1510288985.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:06.139Z,1510288986.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:06.527Z,1510288986.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:06.923Z,1510288986.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:07.335Z,1510288987.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:07.727Z,1510288987.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:08.123Z,1510288988.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:08.531Z,1510288988.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:08.927Z,1510288988.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:09.327Z,1510288989.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:09.732Z,1510288989.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:10.137Z,1510288990.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:10.534Z,1510288990.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:10.947Z,1510288990.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:11.364Z,1510288991.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:11.749Z,1510288991.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:12.123Z,1510288992.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:12.552Z,1510288992.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:12.920Z,1510288992.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:13.354Z,1510288993.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:13.719Z,1510288993.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:14.122Z,1510288994.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:14.522Z,1510288994.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:14.918Z,1510288994.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:15.346Z,1510288995.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:15.729Z,1510288995.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:16.130Z,1510288996.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:16.534Z,1510288996.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:16.922Z,1510288996.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:17.322Z,1510288997.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:17.729Z,1510288997.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:18.121Z,1510288998.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:18.529Z,1510288998.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:18.932Z,1510288998.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:19.321Z,1510288999.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:19.726Z,1510288999.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:20.132Z,1510289000.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:20.535Z,1510289000.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:20.936Z,1510289000.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:21.340Z,1510289001.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:21.771Z,1510289001.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:22.131Z,1510289002.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:22.525Z,1510289002.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:22.927Z,1510289002.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:23.323Z,1510289003.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:23.731Z,1510289003.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:24.127Z,1510289004.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:24.523Z,1510289004.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:24.931Z,1510289004.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:25.327Z,1510289005.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:25.740Z,1510289005.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:26.134Z,1510289006.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:26.543Z,1510289006.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:26.940Z,1510289006.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:27.327Z,1510289007.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:27.727Z,1510289007.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:28.123Z,1510289008.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:28.534Z,1510289008.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:28.946Z,1510289008.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:29.282Z,1510289009.282 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T04:43:29.330Z,1510289009.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:29.724Z,1510289009.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:30.137Z,1510289010.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:30.524Z,1510289010.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:30.937Z,1510289010.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:31.337Z,1510289011.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:31.725Z,1510289011.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:32.124Z,1510289012.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:32.546Z,1510289012.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:32.924Z,1510289012.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:33.379Z,1510289013.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:33.692Z,1510289013.692 [NAL9602](INFO): GPS fix at 20171110T044247: (36.802760, -121.787976)
2017-11-10T04:43:33.798Z,1510289013.798 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T04:43:33.798Z,1510289013.798 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T04:43:34.144Z,1510289014.144 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-11-10T04:43:39.386Z,1510289019.386 [DataOverHttps](INFO): Sending 213 bytes from file Logs/20171110T043737/Courier0004.lzma
2017-11-10T04:43:40.161Z,1510289020.161 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0004.lzma.bak
2017-11-10T04:43:40.161Z,1510289020.161 [DataOverHttps](INFO): SBD MOMSN=5225670
2017-11-10T04:43:50.040Z,1510289030.040 [DataOverHttps](INFO): Sending 300 bytes from file Logs/20171110T043737/Express0005.lzma
2017-11-10T04:43:50.801Z,1510289030.801 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0005.lzma.bak
2017-11-10T04:43:50.801Z,1510289030.801 [DataOverHttps](INFO): SBD MOMSN=5225673
2017-11-10T04:43:51.950Z,1510289031.950 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:43:51.950Z,1510289031.950 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-11-10T04:43:51.950Z,1510289031.950 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T04:43:51.953Z,1510289031.953 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T04:43:51.953Z,1510289031.953 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T04:43:51.953Z,1510289031.953 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T04:43:51.964Z,1510289031.964 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T04:43:52.128Z,1510289032.128 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T04:43:52.128Z,1510289032.128 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-11-10T04:43:55.164Z,1510289035.164 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T04:43:55.165Z,1510289035.165 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T04:43:55.165Z,1510289035.165 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T04:44:09.590Z,1510289049.590 [NAL9602](INFO): Powering down
2017-11-10T04:45:51.228Z,1510289151.228 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T04:45:51.228Z,1510289151.228 [BPC1] Data Fault, FailCount= 1
2017-11-10T04:45:51.228Z,1510289151.228 [BPC1](ERROR): Data Fault
2017-11-10T04:45:51.292Z,1510289151.292 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T04:45:52.456Z,1510289152.456 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T04:45:52.456Z,1510289152.456 [BPC1] No Fault, FailCount= 1
2017-11-10T04:46:18.933Z,1510289178.933 [BPC1](ERROR): Failed to receive battery data
2017-11-10T04:46:18.933Z,1510289178.933 [BPC1] Communications Fault, FailCount= 2
2017-11-10T04:46:18.933Z,1510289178.933 [BPC1](ERROR): Communications Fault
2017-11-10T04:46:19.031Z,1510289179.031 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T04:46:20.194Z,1510289180.194 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T04:46:20.194Z,1510289180.194 [BPC1] No Fault, FailCount= 2
2017-11-10T04:46:55.635Z,1510289215.635 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:46:55.635Z,1510289215.635 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-11-10T04:46:55.635Z,1510289215.635 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T04:46:55.648Z,1510289215.648 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T04:46:55.809Z,1510289215.809 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T04:46:55.809Z,1510289215.809 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-11-10T04:46:56.103Z,1510289216.103 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T04:46:56.103Z,1510289216.103 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T04:46:56.103Z,1510289216.103 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T04:47:48.137Z,1510289268.137 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T04:47:57.676Z,1510289277.676 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:47:57.676Z,1510289277.676 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T04:47:57.749Z,1510289277.749 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:47:57.749Z,1510289277.749 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:47:57.749Z,1510289277.749 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:47:57.749Z,1510289277.749 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T04:47:57.749Z,1510289277.749 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:47:58.115Z,1510289278.115 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:47:58.153Z,1510289278.153 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:47:58.240Z,1510289278.240 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:47:59.685Z,1510289279.685 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:47:59.685Z,1510289279.685 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T04:47:59.857Z,1510289279.857 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:47:59.857Z,1510289279.857 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:47:59.857Z,1510289279.857 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:47:59.857Z,1510289279.857 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T04:47:59.858Z,1510289279.858 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:48:00.107Z,1510289280.107 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:48:00.261Z,1510289280.261 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:48:00.346Z,1510289280.346 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:48:01.679Z,1510289281.679 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:48:01.679Z,1510289281.679 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T04:48:01.961Z,1510289281.961 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:48:01.961Z,1510289281.961 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:48:01.961Z,1510289281.961 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:48:01.961Z,1510289281.961 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T04:48:01.962Z,1510289281.962 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:48:02.081Z,1510289282.081 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:48:02.365Z,1510289282.365 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:48:02.553Z,1510289282.553 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:48:04.147Z,1510289284.147 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:48:04.148Z,1510289284.148 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T04:48:04.169Z,1510289284.169 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:48:04.169Z,1510289284.169 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:48:04.170Z,1510289284.170 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:48:04.170Z,1510289284.170 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T04:48:04.170Z,1510289284.170 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:48:04.483Z,1510289284.483 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:48:04.573Z,1510289284.573 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:48:04.660Z,1510289284.660 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:48:06.097Z,1510289286.097 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:48:06.097Z,1510289286.097 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T04:48:06.277Z,1510289286.277 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:48:06.277Z,1510289286.277 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:48:06.277Z,1510289286.277 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:48:06.277Z,1510289286.277 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T04:48:06.278Z,1510289286.278 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:48:06.507Z,1510289286.507 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:48:06.508Z,1510289286.508 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:48:06.681Z,1510289286.681 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:48:06.773Z,1510289286.773 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:48:51.653Z,1510289331.653 [BPC1](ERROR): Failed to receive battery data
2017-11-10T04:48:51.653Z,1510289331.653 [BPC1] Communications Fault, FailCount= 1
2017-11-10T04:48:51.653Z,1510289331.653 [BPC1](ERROR): Communications Fault
2017-11-10T04:48:51.732Z,1510289331.732 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T04:48:52.474Z,1510289332.474 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T04:48:52.474Z,1510289332.474 [Default:CheckIn:C.Wait] Stopped
2017-11-10T04:48:52.474Z,1510289332.474 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T04:48:52.474Z,1510289332.474 [Default:CheckIn:D] Running Loop=1
2017-11-10T04:48:52.880Z,1510289332.880 [Default:CheckIn:D] Stopped
2017-11-10T04:48:52.880Z,1510289332.880 [Default:CheckIn:E] Running Loop=1
2017-11-10T04:48:52.891Z,1510289332.891 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T04:48:52.891Z,1510289332.891 [BPC1] No Fault, FailCount= 1
2017-11-10T04:48:53.322Z,1510289333.322 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 7.329316 min 
2017-11-10T04:48:53.324Z,1510289333.324 [Default:CheckIn:E] Stopped
2017-11-10T04:48:53.324Z,1510289333.324 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T04:48:53.324Z,1510289333.324 [Default:CheckIn] Stopped
2017-11-10T04:48:53.324Z,1510289333.324 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T04:48:53.325Z,1510289333.325 [Default:CheckIn](INFO): Running loop #2
2017-11-10T04:48:53.326Z,1510289333.326 [Default:CheckIn] Running Loop=2
2017-11-10T04:48:53.326Z,1510289333.326 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T04:48:53.326Z,1510289333.326 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T04:48:56.562Z,1510289336.562 [NAL9602](INFO): Powering up
2017-11-10T04:49:07.706Z,1510289347.706 [NAL9602](INFO): NAL9602 initialized
2017-11-10T04:49:39.706Z,1510289379.706 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-11-10T04:49:39.789Z,1510289379.789 [NAL9602](FAULT): received: 
+CSQ:0

OK
2017-11-10T04:49:39.789Z,1510289379.789 [NAL9602] Data Fault, FailCount= 1
2017-11-10T04:49:39.789Z,1510289379.789 [NAL9602](ERROR): Data Fault
2017-11-10T04:49:39.870Z,1510289379.870 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T04:49:40.102Z,1510289380.102 [NAL9602](INFO): Powering down
2017-11-10T04:49:40.972Z,1510289380.972 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T04:49:40.972Z,1510289380.972 [NAL9602] No Fault, FailCount= 1
2017-11-10T04:49:56.657Z,1510289396.657 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:49:56.657Z,1510289396.657 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-11-10T04:49:56.657Z,1510289396.657 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T04:49:56.698Z,1510289396.698 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T04:49:56.824Z,1510289396.824 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T04:49:56.824Z,1510289396.824 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-11-10T04:49:57.168Z,1510289397.168 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T04:49:57.168Z,1510289397.168 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T04:49:57.168Z,1510289397.168 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T04:50:10.314Z,1510289410.314 [NAL9602](INFO): Powering up NAL9602
2017-11-10T04:50:21.518Z,1510289421.518 [NAL9602](INFO): NAL9602 initialized
2017-11-10T04:51:02.731Z,1510289462.731 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T04:51:02.731Z,1510289462.731 [BPC1] Data Fault, FailCount= 1
2017-11-10T04:51:02.731Z,1510289462.731 [BPC1](ERROR): Data Fault
2017-11-10T04:51:02.782Z,1510289462.782 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T04:51:03.973Z,1510289463.973 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T04:51:03.973Z,1510289463.973 [BPC1] No Fault, FailCount= 1
2017-11-10T04:52:08.423Z,1510289528.423 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T04:52:08.423Z,1510289528.423 [BPC1] Data Fault, FailCount= 1
2017-11-10T04:52:08.424Z,1510289528.424 [BPC1](ERROR): Data Fault
2017-11-10T04:52:08.453Z,1510289528.453 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T04:52:09.665Z,1510289529.665 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T04:52:09.665Z,1510289529.665 [BPC1] No Fault, FailCount= 1
2017-11-10T04:52:51.622Z,1510289571.622 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T04:52:51.622Z,1510289571.622 [BPC1] Data Fault, FailCount= 1
2017-11-10T04:52:51.622Z,1510289571.622 [BPC1](ERROR): Data Fault
2017-11-10T04:52:51.649Z,1510289571.649 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T04:52:52.856Z,1510289572.856 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T04:52:52.856Z,1510289572.856 [BPC1] No Fault, FailCount= 1
2017-11-10T04:52:57.287Z,1510289577.287 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:52:57.287Z,1510289577.287 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-11-10T04:52:57.288Z,1510289577.288 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T04:52:57.302Z,1510289577.302 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T04:52:57.637Z,1510289577.637 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T04:52:57.637Z,1510289577.637 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-11-10T04:52:58.006Z,1510289578.006 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T04:52:58.006Z,1510289578.006 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T04:52:58.007Z,1510289578.007 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T04:53:53.626Z,1510289633.626 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T04:48:53.3Z
2017-11-10T04:53:53.629Z,1510289633.629 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T04:53:53.629Z,1510289633.629 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T04:53:57.662Z,1510289637.662 [DataOverHttps](INFO): Sending 196 bytes from file Logs/20171110T043737/Courier0008.lzma
2017-11-10T04:53:58.433Z,1510289638.433 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0008.lzma.bak
2017-11-10T04:53:58.433Z,1510289638.433 [DataOverHttps](INFO): SBD MOMSN=5225677
2017-11-10T04:54:07.658Z,1510289647.658 [DataOverHttps](INFO): Sending 260 bytes from file Logs/20171110T043737/Express0009.lzma
2017-11-10T04:54:08.433Z,1510289648.433 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0009.lzma.bak
2017-11-10T04:54:08.433Z,1510289648.433 [DataOverHttps](INFO): SBD MOMSN=5225679
2017-11-10T04:54:10.712Z,1510289650.712 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T04:54:10.712Z,1510289650.712 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T04:54:10.712Z,1510289650.712 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T04:54:13.828Z,1510289653.828 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T04:54:44.334Z,1510289684.334 [NAL9602](INFO): Powering down
2017-11-10T04:55:58.050Z,1510289758.050 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:55:58.050Z,1510289758.050 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-11-10T04:55:58.050Z,1510289758.050 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T04:55:58.095Z,1510289758.095 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T04:55:58.454Z,1510289758.454 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T04:55:58.454Z,1510289758.454 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-11-10T04:55:58.857Z,1510289758.857 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T04:55:58.857Z,1510289758.857 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T04:55:58.858Z,1510289758.858 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T04:56:02.410Z,1510289762.410 [BPC1](ERROR): Failed to receive battery data
2017-11-10T04:56:02.410Z,1510289762.410 [BPC1] Communications Fault, FailCount= 1
2017-11-10T04:56:02.410Z,1510289762.410 [BPC1](ERROR): Communications Fault
2017-11-10T04:56:02.483Z,1510289762.483 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T04:56:03.662Z,1510289763.662 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T04:56:03.662Z,1510289763.662 [BPC1] No Fault, FailCount= 1
2017-11-10T04:57:32.583Z,1510289852.583 [BPC1](ERROR): Failed to receive battery data
2017-11-10T04:57:32.584Z,1510289852.584 [BPC1] Communications Fault, FailCount= 1
2017-11-10T04:57:32.584Z,1510289852.584 [BPC1](ERROR): Communications Fault
2017-11-10T04:57:32.644Z,1510289852.644 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T04:57:33.819Z,1510289853.819 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T04:57:33.819Z,1510289853.819 [BPC1] No Fault, FailCount= 1
2017-11-10T04:57:48.208Z,1510289868.208 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T04:58:06.625Z,1510289886.625 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:58:06.625Z,1510289886.625 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T04:58:06.714Z,1510289886.714 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:58:06.714Z,1510289886.714 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:58:06.714Z,1510289886.714 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:58:06.714Z,1510289886.714 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T04:58:06.714Z,1510289886.714 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:58:07.034Z,1510289887.034 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:58:07.117Z,1510289887.117 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:58:07.200Z,1510289887.200 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:58:08.640Z,1510289888.640 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:58:08.640Z,1510289888.640 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T04:58:08.817Z,1510289888.817 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:58:08.818Z,1510289888.818 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:58:08.818Z,1510289888.818 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:58:08.818Z,1510289888.818 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T04:58:08.818Z,1510289888.818 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:58:09.047Z,1510289889.047 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:58:09.223Z,1510289889.223 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:58:09.313Z,1510289889.313 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:58:10.617Z,1510289890.617 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:58:10.617Z,1510289890.617 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T04:58:10.929Z,1510289890.929 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:58:10.929Z,1510289890.929 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:58:10.929Z,1510289890.929 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:58:10.930Z,1510289890.930 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T04:58:10.930Z,1510289890.930 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:58:11.047Z,1510289891.047 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:58:11.333Z,1510289891.333 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:58:11.538Z,1510289891.538 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:58:14.925Z,1510289894.925 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:58:14.925Z,1510289894.925 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T04:58:15.173Z,1510289895.173 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:58:15.173Z,1510289895.173 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:58:15.173Z,1510289895.173 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:58:15.174Z,1510289895.174 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T04:58:15.174Z,1510289895.174 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:58:15.419Z,1510289895.419 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:58:15.577Z,1510289895.577 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:58:15.663Z,1510289895.663 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:58:17.034Z,1510289897.034 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T04:58:17.034Z,1510289897.034 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T04:58:17.277Z,1510289897.277 [Rowe_600LCM](INFO): Initializing
2017-11-10T04:58:17.277Z,1510289897.277 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T04:58:17.277Z,1510289897.277 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T04:58:17.278Z,1510289897.278 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T04:58:17.278Z,1510289897.278 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T04:58:17.422Z,1510289897.422 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:58:17.423Z,1510289897.423 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T04:58:17.681Z,1510289897.681 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T04:58:17.860Z,1510289897.860 [Rowe_600LCM](INFO): Powering down
2017-11-10T04:58:58.990Z,1510289938.990 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T04:58:58.990Z,1510289938.990 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-11-10T04:58:58.990Z,1510289938.990 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T04:58:59.019Z,1510289939.019 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T04:58:59.400Z,1510289939.400 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T04:58:59.400Z,1510289939.400 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-11-10T04:58:59.798Z,1510289939.798 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T04:58:59.798Z,1510289939.798 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T04:58:59.799Z,1510289939.799 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T04:59:10.999Z,1510289950.999 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T04:59:10.999Z,1510289950.999 [Default:CheckIn:C.Wait] Stopped
2017-11-10T04:59:10.999Z,1510289950.999 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T04:59:10.999Z,1510289950.999 [Default:CheckIn:D] Running Loop=1
2017-11-10T04:59:11.371Z,1510289951.371 [Default:CheckIn:D] Stopped
2017-11-10T04:59:11.371Z,1510289951.371 [Default:CheckIn:E] Running Loop=1
2017-11-10T04:59:11.815Z,1510289951.815 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 17.637531 min 
2017-11-10T04:59:11.815Z,1510289951.815 [Default:CheckIn:E] Stopped
2017-11-10T04:59:11.815Z,1510289951.815 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T04:59:11.815Z,1510289951.815 [Default:CheckIn] Stopped
2017-11-10T04:59:11.815Z,1510289951.815 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T04:59:11.815Z,1510289951.815 [Default:CheckIn](INFO): Running loop #3
2017-11-10T04:59:11.816Z,1510289951.816 [Default:CheckIn] Running Loop=3
2017-11-10T04:59:11.816Z,1510289951.816 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T04:59:11.816Z,1510289951.816 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T04:59:15.303Z,1510289955.303 [NAL9602](INFO): Powering up
2017-11-10T04:59:26.194Z,1510289966.194 [NAL9602](INFO): NAL9602 initialized
2017-11-10T04:59:26.998Z,1510289966.998 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T04:59:26.999Z,1510289966.999 [NAL9602] Data Fault, FailCount= 2
2017-11-10T04:59:26.999Z,1510289966.999 [NAL9602](ERROR): Data Fault
2017-11-10T04:59:27.085Z,1510289967.085 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T04:59:27.394Z,1510289967.394 [NAL9602](INFO): Powering down
2017-11-10T04:59:28.260Z,1510289968.260 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T04:59:28.260Z,1510289968.260 [NAL9602] No Fault, FailCount= 2
2017-11-10T04:59:57.398Z,1510289997.398 [NAL9602](INFO): Powering up NAL9602
2017-11-10T05:00:08.602Z,1510290008.602 [NAL9602](INFO): NAL9602 initialized
2017-11-10T05:02:00.004Z,1510290120.004 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:02:00.005Z,1510290120.005 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-11-10T05:02:00.005Z,1510290120.005 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:02:00.030Z,1510290120.030 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:02:00.422Z,1510290120.422 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:02:00.422Z,1510290120.422 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-11-10T05:02:00.787Z,1510290120.787 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:02:00.788Z,1510290120.788 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:02:00.788Z,1510290120.788 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:04:12.037Z,1510290252.037 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T04:59:11.8Z
2017-11-10T05:04:12.037Z,1510290252.037 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T05:04:12.037Z,1510290252.037 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T05:04:16.659Z,1510290256.659 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0012.lzma
2017-11-10T05:04:17.461Z,1510290257.461 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0012.lzma.bak
2017-11-10T05:04:17.462Z,1510290257.462 [DataOverHttps](INFO): SBD MOMSN=5225689
2017-11-10T05:04:27.814Z,1510290267.814 [DataOverHttps](INFO): Sending 289 bytes from file Logs/20171110T043737/Express0013.lzma
2017-11-10T05:04:28.613Z,1510290268.613 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0013.lzma.bak
2017-11-10T05:04:28.614Z,1510290268.614 [DataOverHttps](INFO): SBD MOMSN=5225691
2017-11-10T05:04:29.731Z,1510290269.731 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T05:04:29.731Z,1510290269.731 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T05:04:29.731Z,1510290269.731 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T05:04:42.886Z,1510290282.886 [BPC1](ERROR): Failed to receive battery data
2017-11-10T05:04:42.886Z,1510290282.886 [BPC1] Communications Fault, FailCount= 1
2017-11-10T05:04:42.886Z,1510290282.886 [BPC1](ERROR): Communications Fault
2017-11-10T05:04:42.912Z,1510290282.912 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T05:04:44.109Z,1510290284.109 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T05:04:44.110Z,1510290284.110 [BPC1] No Fault, FailCount= 1
2017-11-10T05:05:00.898Z,1510290300.898 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:05:00.898Z,1510290300.898 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-11-10T05:05:00.898Z,1510290300.898 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:05:00.911Z,1510290300.911 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:05:01.327Z,1510290301.327 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:05:01.327Z,1510290301.327 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-11-10T05:05:01.709Z,1510290301.709 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:05:01.710Z,1510290301.710 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:05:01.710Z,1510290301.710 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:05:12.054Z,1510290312.054 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T05:05:24.889Z,1510290324.889 [BPC1](ERROR): Failed to parse message.
2017-11-10T05:05:24.889Z,1510290324.889 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T05:05:24.889Z,1510290324.889 [BPC1] Data Fault, FailCount= 1
2017-11-10T05:05:24.889Z,1510290324.889 [BPC1](ERROR): Data Fault
2017-11-10T05:05:24.952Z,1510290324.952 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T05:05:26.120Z,1510290326.120 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T05:05:26.120Z,1510290326.120 [BPC1] No Fault, FailCount= 1
2017-11-10T05:05:42.846Z,1510290342.846 [NAL9602](INFO): Powering down
2017-11-10T05:05:50.078Z,1510290350.078 [BPC1](ERROR): Failed to receive battery data
2017-11-10T05:05:50.078Z,1510290350.078 [BPC1] Communications Fault, FailCount= 2
2017-11-10T05:05:50.078Z,1510290350.078 [BPC1](ERROR): Communications Fault
2017-11-10T05:05:50.141Z,1510290350.141 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T05:05:51.314Z,1510290351.314 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T05:05:51.314Z,1510290351.314 [BPC1] No Fault, FailCount= 2
2017-11-10T05:07:48.247Z,1510290468.247 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T05:08:01.819Z,1510290481.819 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:08:01.820Z,1510290481.820 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-11-10T05:08:01.820Z,1510290481.820 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:08:01.846Z,1510290481.846 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:08:02.221Z,1510290482.221 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:08:02.221Z,1510290482.221 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-11-10T05:08:02.617Z,1510290482.617 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:08:02.617Z,1510290482.617 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:08:02.618Z,1510290482.618 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:08:17.407Z,1510290497.407 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:08:17.407Z,1510290497.407 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T05:08:17.693Z,1510290497.693 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:08:17.693Z,1510290497.693 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:08:17.693Z,1510290497.693 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:08:17.693Z,1510290497.693 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T05:08:17.694Z,1510290497.694 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:08:17.811Z,1510290497.811 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:08:18.097Z,1510290498.097 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:08:18.253Z,1510290498.253 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:08:18.586Z,1510290498.586 [PNI_TCM](ERROR): CRC does not match. Expected:0x33343 got:0x2665
2017-11-10T05:08:19.838Z,1510290499.838 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:08:19.838Z,1510290499.838 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T05:08:19.894Z,1510290499.894 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:08:19.894Z,1510290499.894 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:08:19.894Z,1510290499.894 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:08:19.895Z,1510290499.895 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T05:08:19.895Z,1510290499.895 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:08:20.228Z,1510290500.228 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:08:20.297Z,1510290500.297 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:08:20.397Z,1510290500.397 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:08:21.826Z,1510290501.826 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:08:21.826Z,1510290501.826 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T05:08:22.013Z,1510290502.013 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:08:22.013Z,1510290502.013 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:08:22.013Z,1510290502.013 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:08:22.013Z,1510290502.013 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T05:08:22.014Z,1510290502.013 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:08:22.221Z,1510290502.221 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:08:22.417Z,1510290502.417 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:08:22.509Z,1510290502.509 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:08:23.844Z,1510290503.844 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:08:23.844Z,1510290503.844 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T05:08:24.125Z,1510290504.125 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:08:24.125Z,1510290504.125 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:08:24.125Z,1510290504.125 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:08:24.126Z,1510290504.126 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T05:08:24.126Z,1510290504.126 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:08:24.239Z,1510290504.239 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:08:24.529Z,1510290504.529 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:08:24.720Z,1510290504.720 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:08:24.981Z,1510290504.981 [PNI_TCM](ERROR): CRC does not match. Expected:0x6974 got:0x8985
2017-11-10T05:08:25.380Z,1510290505.380 [PNI_TCM](ERROR): CRC does not match. Expected:0x28524 got:0x7490
2017-11-10T05:08:26.240Z,1510290506.240 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:08:26.240Z,1510290506.240 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T05:08:26.337Z,1510290506.337 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:08:26.337Z,1510290506.337 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:08:26.337Z,1510290506.337 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:08:26.338Z,1510290506.338 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T05:08:26.338Z,1510290506.338 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:08:26.610Z,1510290506.610 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:08:26.610Z,1510290506.610 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:08:26.741Z,1510290506.741 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:08:26.824Z,1510290506.824 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:08:34.255Z,1510290514.255 [PNI_TCM](ERROR): CRC does not match. Expected:0x35548 got:0x31396
2017-11-10T05:08:34.256Z,1510290514.256 [PNI_TCM](ERROR): CRC does not match. Expected:0x48510 got:0x31402
2017-11-10T05:08:34.256Z,1510290514.256 [PNI_TCM](ERROR): CRC does not match. Expected:0x52518 got:0x31398
2017-11-10T05:08:34.257Z,1510290514.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x42500 got:0x31413
2017-11-10T05:08:34.257Z,1510290514.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x34064 got:0x31404
2017-11-10T05:08:34.257Z,1510290514.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x43983 got:0x31381
2017-11-10T05:08:34.258Z,1510290514.258 [PNI_TCM](ERROR): CRC does not match. Expected:0x31434 got:0x31412
2017-11-10T05:08:34.258Z,1510290514.258 [PNI_TCM](ERROR): CRC does not match. Expected:0x29897 got:0x31429
2017-11-10T05:09:30.016Z,1510290570.016 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T05:09:30.016Z,1510290570.016 [Default:CheckIn:C.Wait] Stopped
2017-11-10T05:09:30.016Z,1510290570.016 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T05:09:30.017Z,1510290570.017 [Default:CheckIn:D] Running Loop=1
2017-11-10T05:09:30.421Z,1510290570.421 [Default:CheckIn:D] Stopped
2017-11-10T05:09:30.421Z,1510290570.421 [Default:CheckIn:E] Running Loop=1
2017-11-10T05:09:30.818Z,1510290570.818 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 27.955019 min 
2017-11-10T05:09:30.818Z,1510290570.818 [Default:CheckIn:E] Stopped
2017-11-10T05:09:30.819Z,1510290570.819 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T05:09:30.819Z,1510290570.819 [Default:CheckIn] Stopped
2017-11-10T05:09:30.819Z,1510290570.819 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T05:09:30.819Z,1510290570.819 [Default:CheckIn](INFO): Running loop #4
2017-11-10T05:09:30.819Z,1510290570.819 [Default:CheckIn] Running Loop=4
2017-11-10T05:09:30.819Z,1510290570.819 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T05:09:30.819Z,1510290570.819 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T05:09:34.258Z,1510290574.258 [NAL9602](INFO): Powering up
2017-11-10T05:09:45.210Z,1510290585.210 [NAL9602](INFO): NAL9602 initialized
2017-11-10T05:10:17.206Z,1510290617.206 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-11-10T05:10:17.289Z,1510290617.289 [NAL9602](FAULT): received: 
+CSQ:0

OK
2017-11-10T05:10:17.289Z,1510290617.289 [NAL9602] Data Fault, FailCount= 3
2017-11-10T05:10:17.289Z,1510290617.289 [NAL9602](ERROR): Data Fault
2017-11-10T05:10:17.393Z,1510290617.393 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T05:10:17.606Z,1510290617.606 [NAL9602](INFO): Powering down
2017-11-10T05:10:18.472Z,1510290618.472 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T05:10:18.472Z,1510290618.472 [NAL9602] No Fault, FailCount= 3
2017-11-10T05:10:47.970Z,1510290647.970 [NAL9602](INFO): Powering up NAL9602
2017-11-10T05:10:59.174Z,1510290659.174 [NAL9602](INFO): NAL9602 initialized
2017-11-10T05:10:59.970Z,1510290659.970 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T05:10:59.970Z,1510290659.970 [NAL9602] Data Fault, FailCount= 4
2017-11-10T05:10:59.970Z,1510290659.970 [NAL9602](ERROR): Data Fault
2017-11-10T05:11:00.063Z,1510290660.063 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T05:11:00.374Z,1510290660.374 [NAL9602](INFO): Powering down
2017-11-10T05:11:01.254Z,1510290661.254 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T05:11:01.254Z,1510290661.254 [NAL9602] No Fault, FailCount= 4
2017-11-10T05:11:02.816Z,1510290662.816 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:11:02.816Z,1510290662.816 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-11-10T05:11:02.816Z,1510290662.816 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:11:02.829Z,1510290662.829 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:11:03.228Z,1510290663.228 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:11:03.228Z,1510290663.228 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-11-10T05:11:03.623Z,1510290663.623 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:11:03.624Z,1510290663.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:11:03.624Z,1510290663.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:11:30.770Z,1510290690.770 [NAL9602](INFO): Powering up NAL9602
2017-11-10T05:11:41.594Z,1510290701.594 [NAL9602](INFO): NAL9602 initialized
2017-11-10T05:13:40.665Z,1510290820.665 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T05:13:40.665Z,1510290820.665 [BPC1] Data Fault, FailCount= 1
2017-11-10T05:13:40.665Z,1510290820.665 [BPC1](ERROR): Data Fault
2017-11-10T05:13:40.727Z,1510290820.727 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T05:13:41.915Z,1510290821.915 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T05:13:41.916Z,1510290821.916 [BPC1] No Fault, FailCount= 1
2017-11-10T05:14:03.916Z,1510290843.916 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:14:03.916Z,1510290843.916 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-11-10T05:14:03.916Z,1510290843.916 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:14:03.946Z,1510290843.946 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:14:04.333Z,1510290844.333 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:14:04.333Z,1510290844.333 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-11-10T05:14:04.711Z,1510290844.711 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:14:04.712Z,1510290844.712 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:14:04.712Z,1510290844.712 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:14:28.265Z,1510290868.265 [BPC1](ERROR): Failed to receive battery data
2017-11-10T05:14:28.266Z,1510290868.266 [BPC1] Communications Fault, FailCount= 1
2017-11-10T05:14:28.266Z,1510290868.266 [BPC1](ERROR): Communications Fault
2017-11-10T05:14:28.319Z,1510290868.319 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T05:14:29.531Z,1510290869.531 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T05:14:29.531Z,1510290869.531 [BPC1] No Fault, FailCount= 1
2017-11-10T05:14:31.094Z,1510290871.094 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T05:09:30.8Z
2017-11-10T05:14:31.094Z,1510290871.094 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T05:14:31.094Z,1510290871.094 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T05:14:35.496Z,1510290875.496 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0016.lzma
2017-11-10T05:14:36.285Z,1510290876.285 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0016.lzma.bak
2017-11-10T05:14:36.285Z,1510290876.285 [DataOverHttps](INFO): SBD MOMSN=5225702
2017-11-10T05:14:45.989Z,1510290885.989 [DataOverHttps](INFO): Sending 320 bytes from file Logs/20171110T043737/Express0017.lzma
2017-11-10T05:14:46.785Z,1510290886.785 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0017.lzma.bak
2017-11-10T05:14:46.786Z,1510290886.786 [DataOverHttps](INFO): SBD MOMSN=5225704
2017-11-10T05:14:47.899Z,1510290887.899 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T05:14:47.899Z,1510290887.899 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T05:14:47.899Z,1510290887.899 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T05:14:51.086Z,1510290891.086 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T05:15:21.582Z,1510290921.582 [NAL9602](INFO): Powering down
2017-11-10T05:15:39.613Z,1510290939.613 [BPC1](ERROR): Failed to receive battery data
2017-11-10T05:15:39.613Z,1510290939.613 [BPC1] Communications Fault, FailCount= 1
2017-11-10T05:15:39.613Z,1510290939.613 [BPC1](ERROR): Communications Fault
2017-11-10T05:15:39.671Z,1510290939.671 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T05:15:40.843Z,1510290940.843 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T05:15:40.843Z,1510290940.843 [BPC1] No Fault, FailCount= 1
2017-11-10T05:17:04.720Z,1510291024.720 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:17:04.720Z,1510291024.720 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-11-10T05:17:04.720Z,1510291024.720 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:17:04.746Z,1510291024.746 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:17:05.155Z,1510291025.155 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:17:05.155Z,1510291025.155 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-11-10T05:17:05.579Z,1510291025.579 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:17:05.579Z,1510291025.579 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:17:05.579Z,1510291025.579 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:17:48.343Z,1510291068.343 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T05:18:26.380Z,1510291106.380 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:18:26.380Z,1510291106.380 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T05:18:26.681Z,1510291106.681 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:18:26.681Z,1510291106.681 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:18:26.681Z,1510291106.681 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:18:26.681Z,1510291106.681 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T05:18:26.682Z,1510291106.682 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:18:26.783Z,1510291106.783 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:18:27.085Z,1510291107.085 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:18:27.340Z,1510291107.340 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:18:28.781Z,1510291108.781 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:18:28.781Z,1510291108.781 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T05:18:28.957Z,1510291108.957 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:18:28.958Z,1510291108.958 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:18:28.958Z,1510291108.958 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:18:28.958Z,1510291108.958 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T05:18:28.958Z,1510291108.958 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:18:29.187Z,1510291109.187 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:18:29.361Z,1510291109.361 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:18:29.446Z,1510291109.446 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:18:30.788Z,1510291110.788 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:18:30.788Z,1510291110.788 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T05:18:31.061Z,1510291111.061 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:18:31.062Z,1510291111.062 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:18:31.062Z,1510291111.062 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:18:31.062Z,1510291111.062 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T05:18:31.062Z,1510291111.062 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:18:31.195Z,1510291111.195 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:18:31.465Z,1510291111.465 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:18:31.611Z,1510291111.611 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:18:33.212Z,1510291113.212 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:18:33.212Z,1510291113.212 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T05:18:33.225Z,1510291113.225 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:18:33.225Z,1510291113.225 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:18:33.225Z,1510291113.225 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:18:33.226Z,1510291113.226 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T05:18:33.226Z,1510291113.226 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:18:33.603Z,1510291113.603 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:18:33.629Z,1510291113.629 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:18:33.722Z,1510291113.722 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:18:35.196Z,1510291115.196 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:18:35.197Z,1510291115.197 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T05:18:35.337Z,1510291115.337 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:18:35.337Z,1510291115.337 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:18:35.338Z,1510291115.338 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:18:35.338Z,1510291115.338 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T05:18:35.338Z,1510291115.338 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:18:35.598Z,1510291115.598 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:18:35.598Z,1510291115.598 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:18:35.742Z,1510291115.742 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:18:35.827Z,1510291115.827 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:19:48.334Z,1510291188.334 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T05:19:48.334Z,1510291188.334 [Default:CheckIn:C.Wait] Stopped
2017-11-10T05:19:48.334Z,1510291188.334 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T05:19:48.334Z,1510291188.334 [Default:CheckIn:D] Running Loop=1
2017-11-10T05:19:48.741Z,1510291188.741 [Default:CheckIn:D] Stopped
2017-11-10T05:19:48.741Z,1510291188.741 [Default:CheckIn:E] Running Loop=1
2017-11-10T05:19:49.145Z,1510291189.145 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 38.260356 min 
2017-11-10T05:19:49.145Z,1510291189.145 [Default:CheckIn:E] Stopped
2017-11-10T05:19:49.146Z,1510291189.146 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T05:19:49.146Z,1510291189.146 [Default:CheckIn] Stopped
2017-11-10T05:19:49.146Z,1510291189.146 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T05:19:49.146Z,1510291189.146 [Default:CheckIn](INFO): Running loop #5
2017-11-10T05:19:49.146Z,1510291189.146 [Default:CheckIn] Running Loop=5
2017-11-10T05:19:49.146Z,1510291189.146 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T05:19:49.146Z,1510291189.146 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T05:19:52.370Z,1510291192.370 [NAL9602](INFO): Powering up
2017-11-10T05:20:03.514Z,1510291203.514 [NAL9602](INFO): NAL9602 initialized
2017-11-10T05:20:05.964Z,1510291205.964 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:20:05.964Z,1510291205.964 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-11-10T05:20:05.964Z,1510291205.964 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:20:05.993Z,1510291205.993 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:20:06.375Z,1510291206.375 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:20:06.375Z,1510291206.375 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-11-10T05:20:06.763Z,1510291206.763 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:20:06.763Z,1510291206.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:20:06.764Z,1510291206.764 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:20:35.514Z,1510291235.514 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-11-10T05:20:35.589Z,1510291235.589 [NAL9602](FAULT): received: 
+CSQ:0

OK
2017-11-10T05:20:35.589Z,1510291235.589 [NAL9602] Data Fault, FailCount= 5
2017-11-10T05:20:35.589Z,1510291235.589 [NAL9602](ERROR): Data Fault
2017-11-10T05:20:35.685Z,1510291235.685 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T05:20:35.685Z,1510291235.685 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-10T05:20:35.914Z,1510291235.914 [NAL9602](INFO): Powering down
2017-11-10T05:20:36.002Z,1510291236.002 [CommandLine](FAULT): Scheduling is paused
2017-11-10T05:20:36.002Z,1510291236.002 [CBIT](INFO): Critical error at 20171110T052035
2017-11-10T05:20:36.003Z,1510291236.003 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2017-11-10T05:22:35.966Z,1510291355.966 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T05:22:35.966Z,1510291355.966 [NAL9602] No Fault, FailCount= 5
2017-11-10T05:22:36.314Z,1510291356.314 [NAL9602](INFO): Powering up NAL9602
2017-11-10T05:22:47.514Z,1510291367.514 [NAL9602](INFO): NAL9602 initialized
2017-11-10T05:22:48.318Z,1510291368.318 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T05:22:48.318Z,1510291368.318 [NAL9602] Data Fault, FailCount= 1
2017-11-10T05:22:48.318Z,1510291368.318 [NAL9602](ERROR): Data Fault
2017-11-10T05:22:48.400Z,1510291368.400 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T05:22:48.721Z,1510291368.721 [NAL9602](INFO): Powering down
2017-11-10T05:22:49.593Z,1510291369.593 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T05:22:49.593Z,1510291369.593 [NAL9602] No Fault, FailCount= 1
2017-11-10T05:23:07.117Z,1510291387.117 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:23:07.117Z,1510291387.117 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-11-10T05:23:07.118Z,1510291387.118 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:23:07.131Z,1510291387.131 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:23:07.576Z,1510291387.576 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:23:07.576Z,1510291387.576 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-11-10T05:23:07.925Z,1510291387.925 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:23:07.925Z,1510291387.925 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:23:07.926Z,1510291387.926 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:23:19.074Z,1510291399.074 [NAL9602](INFO): Powering up NAL9602
2017-11-10T05:23:30.278Z,1510291410.278 [NAL9602](INFO): NAL9602 initialized
2017-11-10T05:24:18.703Z,1510291458.703 [NAL9602](INFO): SBD MO Status=0, MOMSN=2605, MT Status=0, MTMSN=0
2017-11-10T05:24:18.704Z,1510291458.704 [NAL9602](INFO): No messages in MT queue
2017-11-10T05:24:49.165Z,1510291489.165 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T05:19:49.1Z
2017-11-10T05:24:49.165Z,1510291489.165 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T05:24:49.165Z,1510291489.165 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T05:24:53.347Z,1510291493.347 [DataOverHttps](INFO): Sending 111 bytes from file Logs/20171110T043737/Courier0020.lzma
2017-11-10T05:24:54.137Z,1510291494.137 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0020.lzma.bak
2017-11-10T05:24:54.138Z,1510291494.138 [DataOverHttps](INFO): SBD MOMSN=5225716
2017-11-10T05:24:54.167Z,1510291494.167 [PNI_TCM](ERROR): CRC does not match. Expected:0x58604 got:0x36708
2017-11-10T05:25:03.449Z,1510291503.449 [DataOverHttps](INFO): Sending 367 bytes from file Logs/20171110T043737/Express0021.lzma
2017-11-10T05:25:05.415Z,1510291505.415 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0021.lzma.bak
2017-11-10T05:25:05.415Z,1510291505.415 [DataOverHttps](INFO): SBD MOMSN=5225719
2017-11-10T05:25:06.399Z,1510291506.399 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T05:25:06.399Z,1510291506.399 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T05:25:06.400Z,1510291506.400 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T05:25:23.386Z,1510291523.386 [NAL9602](INFO): Powering down
2017-11-10T05:25:27.414Z,1510291527.414 [BPC1](ERROR): Failed to receive battery data
2017-11-10T05:25:27.414Z,1510291527.414 [BPC1] Communications Fault, FailCount= 1
2017-11-10T05:25:27.414Z,1510291527.414 [BPC1](ERROR): Communications Fault
2017-11-10T05:25:27.483Z,1510291527.483 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T05:25:28.662Z,1510291528.662 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T05:25:28.662Z,1510291528.662 [BPC1] No Fault, FailCount= 1
2017-11-10T05:26:10.205Z,1510291570.205 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:26:10.205Z,1510291570.205 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-11-10T05:26:10.205Z,1510291570.205 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:26:10.231Z,1510291570.231 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:26:10.349Z,1510291570.349 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:26:10.349Z,1510291570.349 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-11-10T05:26:10.694Z,1510291570.694 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:26:10.695Z,1510291570.695 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:26:10.695Z,1510291570.695 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:27:48.704Z,1510291668.704 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T05:28:35.649Z,1510291715.649 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:28:35.649Z,1510291715.649 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T05:28:35.753Z,1510291715.753 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:28:35.753Z,1510291715.753 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:28:35.753Z,1510291715.753 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:28:35.753Z,1510291715.753 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T05:28:35.753Z,1510291715.753 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:28:36.043Z,1510291716.043 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:28:36.157Z,1510291716.157 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:28:36.246Z,1510291716.246 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:28:37.713Z,1510291717.713 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:28:37.713Z,1510291717.713 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T05:28:37.861Z,1510291717.861 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:28:37.861Z,1510291717.861 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:28:37.861Z,1510291717.861 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:28:37.861Z,1510291717.861 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T05:28:37.862Z,1510291717.862 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:28:38.076Z,1510291718.076 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:28:38.265Z,1510291718.265 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:28:38.344Z,1510291718.344 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:28:39.651Z,1510291719.651 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:28:39.652Z,1510291719.652 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T05:28:39.961Z,1510291719.961 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:28:39.961Z,1510291719.961 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:28:39.962Z,1510291719.962 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:28:39.962Z,1510291719.962 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T05:28:39.962Z,1510291719.962 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:28:40.077Z,1510291720.077 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:28:40.365Z,1510291720.365 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:28:40.572Z,1510291720.572 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:28:42.064Z,1510291722.064 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:28:42.064Z,1510291722.064 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T05:28:42.189Z,1510291722.189 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:28:42.189Z,1510291722.189 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:28:42.190Z,1510291722.190 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:28:42.190Z,1510291722.190 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T05:28:42.190Z,1510291722.190 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:28:42.477Z,1510291722.477 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:28:42.593Z,1510291722.593 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:28:42.682Z,1510291722.682 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:28:44.071Z,1510291724.071 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:28:44.072Z,1510291724.072 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T05:28:44.297Z,1510291724.297 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:28:44.297Z,1510291724.297 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:28:44.297Z,1510291724.297 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:28:44.298Z,1510291724.298 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T05:28:44.298Z,1510291724.298 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:28:44.503Z,1510291724.503 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:28:44.504Z,1510291724.504 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:28:44.701Z,1510291724.701 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:28:44.836Z,1510291724.836 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:29:10.892Z,1510291750.892 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:29:10.892Z,1510291750.892 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-11-10T05:29:10.892Z,1510291750.892 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:29:10.905Z,1510291750.905 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:29:11.284Z,1510291751.284 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:29:11.284Z,1510291751.284 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-11-10T05:29:11.649Z,1510291751.649 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:29:11.650Z,1510291751.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:29:11.650Z,1510291751.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:30:06.857Z,1510291806.857 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T05:30:06.857Z,1510291806.857 [Default:CheckIn:C.Wait] Stopped
2017-11-10T05:30:06.857Z,1510291806.857 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T05:30:06.857Z,1510291806.857 [Default:CheckIn:D] Running Loop=1
2017-11-10T05:30:07.259Z,1510291807.259 [Default:CheckIn:D] Stopped
2017-11-10T05:30:07.259Z,1510291807.259 [Default:CheckIn:E] Running Loop=1
2017-11-10T05:30:10.357Z,1510291810.357 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 48.568998 min 
2017-11-10T05:30:10.357Z,1510291810.357 [Default:CheckIn:E] Stopped
2017-11-10T05:30:10.357Z,1510291810.357 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T05:30:10.357Z,1510291810.357 [Default:CheckIn] Stopped
2017-11-10T05:30:10.357Z,1510291810.357 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T05:30:10.358Z,1510291810.358 [Default:CheckIn](INFO): Running loop #6
2017-11-10T05:30:10.358Z,1510291810.358 [Default:CheckIn] Running Loop=6
2017-11-10T05:30:10.358Z,1510291810.358 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T05:30:10.358Z,1510291810.358 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T05:30:10.794Z,1510291810.794 [NAL9602](INFO): Powering up
2017-11-10T05:30:21.994Z,1510291821.994 [NAL9602](INFO): NAL9602 initialized
2017-11-10T05:30:38.026Z,1510291838.026 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T05:30:38.026Z,1510291838.026 [BPC1] Data Fault, FailCount= 1
2017-11-10T05:30:38.026Z,1510291838.026 [BPC1](ERROR): Data Fault
2017-11-10T05:30:38.130Z,1510291838.130 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T05:30:39.270Z,1510291839.270 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T05:30:39.271Z,1510291839.271 [BPC1] No Fault, FailCount= 1
2017-11-10T05:32:11.859Z,1510291931.859 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:32:11.859Z,1510291931.859 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-11-10T05:32:11.859Z,1510291931.859 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:32:11.912Z,1510291931.912 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:32:12.287Z,1510291932.287 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:32:12.287Z,1510291932.287 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-11-10T05:32:12.664Z,1510291932.664 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:32:12.665Z,1510291932.665 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:32:12.665Z,1510291932.665 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:35:11.394Z,1510292111.394 [BPC1](ERROR): Failed to receive battery data
2017-11-10T05:35:11.395Z,1510292111.395 [BPC1] Communications Fault, FailCount= 1
2017-11-10T05:35:11.395Z,1510292111.395 [BPC1](ERROR): Communications Fault
2017-11-10T05:35:11.438Z,1510292111.438 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T05:30:10.4Z
2017-11-10T05:35:11.438Z,1510292111.438 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T05:35:11.438Z,1510292111.438 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T05:35:11.465Z,1510292111.465 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T05:35:12.446Z,1510292112.446 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T05:35:12.446Z,1510292112.446 [BPC1] No Fault, FailCount= 1
2017-11-10T05:35:12.851Z,1510292112.851 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:35:12.851Z,1510292112.851 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-11-10T05:35:12.852Z,1510292112.852 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:35:12.889Z,1510292112.889 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:35:13.210Z,1510292113.210 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:35:13.210Z,1510292113.210 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-11-10T05:35:16.303Z,1510292116.303 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:35:16.303Z,1510292116.303 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:35:16.303Z,1510292116.303 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:35:16.353Z,1510292116.353 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0024.lzma
2017-11-10T05:35:17.145Z,1510292117.145 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0024.lzma.bak
2017-11-10T05:35:17.145Z,1510292117.145 [DataOverHttps](INFO): SBD MOMSN=5225733
2017-11-10T05:35:26.208Z,1510292126.208 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T05:35:26.314Z,1510292126.314 [DataOverHttps](INFO): Sending 200 bytes from file Logs/20171110T043737/Express0025.lzma
2017-11-10T05:35:27.105Z,1510292127.105 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0025.lzma.bak
2017-11-10T05:35:27.106Z,1510292127.106 [DataOverHttps](INFO): SBD MOMSN=5225735
2017-11-10T05:35:28.292Z,1510292128.292 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T05:35:28.293Z,1510292128.293 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T05:35:28.293Z,1510292128.293 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T05:35:56.706Z,1510292156.706 [NAL9602](INFO): Powering down
2017-11-10T05:37:20.078Z,1510292240.078 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T05:37:20.078Z,1510292240.078 [BPC1] Data Fault, FailCount= 1
2017-11-10T05:37:20.078Z,1510292240.078 [BPC1](ERROR): Data Fault
2017-11-10T05:37:20.104Z,1510292240.104 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T05:37:21.323Z,1510292241.323 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T05:37:21.323Z,1510292241.323 [BPC1] No Fault, FailCount= 1
2017-11-10T05:37:49.098Z,1510292269.098 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T05:38:16.676Z,1510292296.676 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:38:16.676Z,1510292296.676 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-11-10T05:38:16.676Z,1510292296.676 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:38:16.689Z,1510292296.689 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:38:17.121Z,1510292297.121 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:38:17.121Z,1510292297.121 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-11-10T05:38:17.482Z,1510292297.482 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:38:17.483Z,1510292297.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:38:17.483Z,1510292297.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:38:44.298Z,1510292324.298 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:38:44.298Z,1510292324.298 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T05:38:44.305Z,1510292324.305 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:38:44.305Z,1510292324.305 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:38:44.305Z,1510292324.305 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:38:44.305Z,1510292324.305 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T05:38:44.306Z,1510292324.306 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:38:44.708Z,1510292324.708 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:38:44.709Z,1510292324.709 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:38:44.837Z,1510292324.837 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:38:46.324Z,1510292326.324 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:38:46.324Z,1510292326.324 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T05:38:46.453Z,1510292326.453 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:38:46.453Z,1510292326.453 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:38:46.453Z,1510292326.453 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:38:46.453Z,1510292326.453 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T05:38:46.454Z,1510292326.454 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:38:46.715Z,1510292326.715 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:38:46.857Z,1510292326.857 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:38:46.939Z,1510292326.939 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:38:48.299Z,1510292328.299 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:38:48.299Z,1510292328.299 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T05:38:48.553Z,1510292328.553 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:38:48.553Z,1510292328.553 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:38:48.553Z,1510292328.553 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:38:48.554Z,1510292328.554 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T05:38:48.554Z,1510292328.554 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:38:48.717Z,1510292328.717 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:38:48.957Z,1510292328.957 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:38:49.096Z,1510292329.096 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:38:50.699Z,1510292330.699 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:38:50.699Z,1510292330.699 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T05:38:50.713Z,1510292330.713 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:38:50.713Z,1510292330.713 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:38:50.714Z,1510292330.714 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:38:50.714Z,1510292330.714 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T05:38:50.714Z,1510292330.714 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:38:51.099Z,1510292331.099 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:38:51.117Z,1510292331.117 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:38:51.249Z,1510292331.249 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:38:52.702Z,1510292332.702 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:38:52.703Z,1510292332.703 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T05:38:52.866Z,1510292332.866 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:38:52.866Z,1510292332.866 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:38:52.866Z,1510292332.866 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:38:52.867Z,1510292332.867 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T05:38:52.867Z,1510292332.867 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:38:53.116Z,1510292333.116 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:38:53.116Z,1510292333.116 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:38:53.269Z,1510292333.269 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:38:53.354Z,1510292333.354 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:39:15.871Z,1510292355.871 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T05:39:15.872Z,1510292355.872 [BPC1] Data Fault, FailCount= 1
2017-11-10T05:39:15.872Z,1510292355.872 [BPC1](ERROR): Data Fault
2017-11-10T05:39:15.896Z,1510292355.896 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T05:39:17.103Z,1510292357.103 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T05:39:17.103Z,1510292357.103 [BPC1] No Fault, FailCount= 1
2017-11-10T05:40:28.665Z,1510292428.665 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T05:40:28.666Z,1510292428.666 [Default:CheckIn:C.Wait] Stopped
2017-11-10T05:40:28.666Z,1510292428.666 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T05:40:28.666Z,1510292428.666 [Default:CheckIn:D] Running Loop=1
2017-11-10T05:40:29.115Z,1510292429.115 [Default:CheckIn:D] Stopped
2017-11-10T05:40:29.116Z,1510292429.116 [Default:CheckIn:E] Running Loop=1
2017-11-10T05:40:29.477Z,1510292429.477 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 58.933264 min 
2017-11-10T05:40:29.477Z,1510292429.477 [Default:CheckIn:E] Stopped
2017-11-10T05:40:29.477Z,1510292429.477 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T05:40:29.477Z,1510292429.477 [Default:CheckIn] Stopped
2017-11-10T05:40:29.478Z,1510292429.478 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T05:40:29.478Z,1510292429.478 [Default:CheckIn](INFO): Running loop #7
2017-11-10T05:40:29.478Z,1510292429.478 [Default:CheckIn] Running Loop=7
2017-11-10T05:40:29.478Z,1510292429.478 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T05:40:29.478Z,1510292429.478 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T05:40:32.717Z,1510292432.717 [NAL9602](INFO): Powering up
2017-11-10T05:40:43.906Z,1510292443.906 [NAL9602](INFO): NAL9602 initialized
2017-11-10T05:40:44.706Z,1510292444.706 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T05:40:44.706Z,1510292444.706 [NAL9602] Data Fault, FailCount= 1
2017-11-10T05:40:44.706Z,1510292444.706 [NAL9602](ERROR): Data Fault
2017-11-10T05:40:44.813Z,1510292444.813 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T05:40:45.110Z,1510292445.110 [NAL9602](INFO): Powering down
2017-11-10T05:40:46.008Z,1510292446.008 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T05:40:46.008Z,1510292446.008 [NAL9602] No Fault, FailCount= 1
2017-11-10T05:41:15.506Z,1510292475.506 [NAL9602](INFO): Powering up NAL9602
2017-11-10T05:41:17.611Z,1510292477.611 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:41:17.611Z,1510292477.611 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-11-10T05:41:17.611Z,1510292477.611 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:41:17.624Z,1510292477.624 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:41:17.967Z,1510292477.967 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:41:17.967Z,1510292477.967 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-11-10T05:41:18.354Z,1510292478.354 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:41:18.355Z,1510292478.355 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:41:18.355Z,1510292478.355 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:41:26.310Z,1510292486.310 [NAL9602](INFO): NAL9602 initialized
2017-11-10T05:41:59.799Z,1510292519.799 [NAL9602](INFO): SBD MO Status=0, MOMSN=2606, MT Status=0, MTMSN=0
2017-11-10T05:41:59.800Z,1510292519.800 [NAL9602](INFO): No messages in MT queue
2017-11-10T05:44:18.372Z,1510292658.372 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:44:18.372Z,1510292658.372 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2017-11-10T05:44:18.372Z,1510292658.372 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:44:18.385Z,1510292658.385 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:44:18.731Z,1510292658.731 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:44:18.732Z,1510292658.732 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2017-11-10T05:44:19.122Z,1510292659.122 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:44:19.123Z,1510292659.123 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:44:19.123Z,1510292659.123 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:45:29.510Z,1510292729.510 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T05:40:29.5Z
2017-11-10T05:45:29.510Z,1510292729.510 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T05:45:29.510Z,1510292729.510 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T05:45:42.540Z,1510292742.540 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0028.lzma
2017-11-10T05:45:43.338Z,1510292743.338 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0028.lzma.bak
2017-11-10T05:45:43.338Z,1510292743.338 [DataOverHttps](INFO): SBD MOMSN=5225745
2017-11-10T05:45:48.571Z,1510292748.571 [PNI_TCM](ERROR): CRC does not match. Expected:0x42028 got:0x31940
2017-11-10T05:45:53.052Z,1510292753.052 [PNI_TCM](ERROR): CRC does not match. Expected:0x11733 got:0x24892
2017-11-10T05:45:53.085Z,1510292753.085 [PNI_TCM](ERROR): CRC does not match. Expected:0x54581 got:0x25962
2017-11-10T05:45:53.085Z,1510292753.085 [PNI_TCM](ERROR): CRC does not match. Expected:0x29915 got:0x31167
2017-11-10T05:45:53.086Z,1510292753.086 [PNI_TCM](ERROR): CRC does not match. Expected:0x582 got:0x24757
2017-11-10T05:45:53.086Z,1510292753.086 [PNI_TCM](ERROR): CRC does not match. Expected:0x56006 got:0x23163
2017-11-10T05:45:53.086Z,1510292753.086 [PNI_TCM](ERROR): CRC does not match. Expected:0x23850 got:0x22332
2017-11-10T05:45:53.087Z,1510292753.087 [PNI_TCM](ERROR): CRC does not match. Expected:0x13995 got:0x19130
2017-11-10T05:45:53.087Z,1510292753.087 [PNI_TCM](ERROR): CRC does not match. Expected:0x65197 got:0x18134
2017-11-10T05:45:53.088Z,1510292753.088 [PNI_TCM](ERROR): CRC does not match. Expected:0x7386 got:0x22769
2017-11-10T05:45:53.237Z,1510292753.237 [DataOverHttps](INFO): Sending 292 bytes from file Logs/20171110T043737/Express0029.lzma
2017-11-10T05:45:54.037Z,1510292754.037 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0029.lzma.bak
2017-11-10T05:45:54.037Z,1510292754.037 [DataOverHttps](INFO): SBD MOMSN=5225747
2017-11-10T05:45:55.140Z,1510292755.140 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T05:45:55.140Z,1510292755.140 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T05:45:55.141Z,1510292755.141 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T05:46:00.981Z,1510292760.981 [PNI_TCM](ERROR): CRC does not match. Expected:0x20691 got:0x47802
2017-11-10T05:46:01.754Z,1510292761.754 [NAL9602](INFO): Powering down
2017-11-10T05:46:02.574Z,1510292762.574 [PNI_TCM](ERROR): CRC does not match. Expected:0x28944 got:0x36
2017-11-10T05:46:04.174Z,1510292764.174 [PNI_TCM](ERROR): CRC does not match. Expected:0x43476 got:0x17947
2017-11-10T05:46:05.775Z,1510292765.775 [PNI_TCM](ERROR): CRC does not match. Expected:0x56338 got:0x6977
2017-11-10T05:46:07.378Z,1510292767.378 [PNI_TCM](ERROR): CRC does not match. Expected:0x8796 got:0x1857
2017-11-10T05:46:08.178Z,1510292768.178 [BPC1](ERROR): Failed to receive battery data
2017-11-10T05:46:08.178Z,1510292768.178 [BPC1] Communications Fault, FailCount= 1
2017-11-10T05:46:08.178Z,1510292768.178 [BPC1](ERROR): Communications Fault
2017-11-10T05:46:08.249Z,1510292768.249 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T05:46:09.432Z,1510292769.432 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T05:46:09.432Z,1510292769.432 [BPC1] No Fault, FailCount= 1
2017-11-10T05:46:16.974Z,1510292776.974 [PNI_TCM](ERROR): CRC does not match. Expected:0x25879 got:0x6977
2017-11-10T05:46:23.386Z,1510292783.386 [PNI_TCM](ERROR): CRC does not match. Expected:0x5248 got:0x35180
2017-11-10T05:46:28.186Z,1510292788.186 [PNI_TCM](ERROR): CRC does not match. Expected:0x13905 got:0x1051
2017-11-10T05:46:29.775Z,1510292789.775 [PNI_TCM](ERROR): CRC does not match. Expected:0x23236 got:0x17018
2017-11-10T05:46:34.581Z,1510292794.581 [PNI_TCM](ERROR): CRC does not match. Expected:0x18642 got:0x32066
2017-11-10T05:46:42.576Z,1510292802.576 [PNI_TCM](ERROR): CRC does not match. Expected:0x28412 got:0x1746
2017-11-10T05:46:47.374Z,1510292807.374 [PNI_TCM](ERROR): CRC does not match. Expected:0x49732 got:0x2587
2017-11-10T05:46:48.984Z,1510292808.984 [PNI_TCM](ERROR): CRC does not match. Expected:0x52494 got:0x6977
2017-11-10T05:46:52.186Z,1510292812.186 [PNI_TCM](ERROR): CRC does not match. Expected:0x29203 got:0x6977
2017-11-10T05:46:53.778Z,1510292813.778 [PNI_TCM](ERROR): CRC does not match. Expected:0x14190 got:0x6977
2017-11-10T05:47:19.388Z,1510292839.388 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:47:19.388Z,1510292839.388 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2017-11-10T05:47:19.389Z,1510292839.389 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:47:19.414Z,1510292839.414 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:47:19.798Z,1510292839.798 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:47:19.798Z,1510292839.798 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2017-11-10T05:47:20.170Z,1510292840.170 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:47:20.171Z,1510292840.171 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:47:20.171Z,1510292840.171 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:47:49.414Z,1510292869.414 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T05:48:53.045Z,1510292933.045 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:48:53.045Z,1510292933.045 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T05:48:53.273Z,1510292933.273 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:48:53.273Z,1510292933.273 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:48:53.273Z,1510292933.273 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:48:53.273Z,1510292933.273 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T05:48:53.273Z,1510292933.273 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:48:53.444Z,1510292933.444 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:48:53.678Z,1510292933.678 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:48:53.769Z,1510292933.769 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:48:55.056Z,1510292935.056 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:48:55.056Z,1510292935.056 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T05:48:55.389Z,1510292935.389 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:48:55.389Z,1510292935.389 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:48:55.389Z,1510292935.389 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:48:55.389Z,1510292935.389 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T05:48:55.389Z,1510292935.389 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:48:55.482Z,1510292935.482 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:48:55.794Z,1510292935.794 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:48:55.988Z,1510292935.988 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:48:59.476Z,1510292939.476 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:48:59.476Z,1510292939.476 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T05:48:59.625Z,1510292939.625 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:48:59.625Z,1510292939.625 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:48:59.625Z,1510292939.625 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:48:59.625Z,1510292939.625 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T05:48:59.625Z,1510292939.625 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:48:59.981Z,1510292939.981 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:49:00.029Z,1510292940.029 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:49:00.111Z,1510292940.111 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:49:01.574Z,1510292941.574 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:49:01.574Z,1510292941.574 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T05:49:01.725Z,1510292941.725 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:49:01.725Z,1510292941.725 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:49:01.725Z,1510292941.725 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:49:01.726Z,1510292941.726 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T05:49:01.726Z,1510292941.726 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:49:01.978Z,1510292941.978 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:49:02.129Z,1510292942.129 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:49:02.222Z,1510292942.222 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:49:03.579Z,1510292943.579 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:49:03.579Z,1510292943.579 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T05:49:03.837Z,1510292943.837 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:49:03.837Z,1510292943.837 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:49:03.837Z,1510292943.837 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:49:03.838Z,1510292943.838 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T05:49:03.838Z,1510292943.838 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:49:03.944Z,1510292943.944 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:49:03.945Z,1510292943.945 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:49:04.241Z,1510292944.241 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:49:04.439Z,1510292944.439 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:50:20.511Z,1510293020.511 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:50:20.511Z,1510293020.511 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2017-11-10T05:50:20.511Z,1510293020.511 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:50:20.524Z,1510293020.524 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:50:20.918Z,1510293020.918 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:50:20.918Z,1510293020.918 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2017-11-10T05:50:21.314Z,1510293021.314 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:50:21.315Z,1510293021.315 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:50:21.315Z,1510293021.315 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:50:55.314Z,1510293055.314 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T05:50:55.314Z,1510293055.314 [Default:CheckIn:C.Wait] Stopped
2017-11-10T05:50:55.314Z,1510293055.314 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T05:50:55.314Z,1510293055.314 [Default:CheckIn:D] Running Loop=1
2017-11-10T05:50:55.725Z,1510293055.725 [Default:CheckIn:D] Stopped
2017-11-10T05:50:55.725Z,1510293055.725 [Default:CheckIn:E] Running Loop=1
2017-11-10T05:50:56.128Z,1510293056.128 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 69.376758 min 
2017-11-10T05:50:56.128Z,1510293056.128 [Default:CheckIn:E] Stopped
2017-11-10T05:50:56.129Z,1510293056.129 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T05:50:56.129Z,1510293056.129 [Default:CheckIn] Stopped
2017-11-10T05:50:56.129Z,1510293056.129 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T05:50:56.129Z,1510293056.129 [Default:CheckIn](INFO): Running loop #8
2017-11-10T05:50:56.129Z,1510293056.129 [Default:CheckIn] Running Loop=8
2017-11-10T05:50:56.129Z,1510293056.129 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T05:50:56.129Z,1510293056.129 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T05:50:59.571Z,1510293059.571 [NAL9602](INFO): Powering up
2017-11-10T05:51:01.771Z,1510293061.771 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-10T05:51:10.539Z,1510293070.539 [NAL9602](INFO): NAL9602 initialized
2017-11-10T05:51:12.970Z,1510293072.970 [PNI_TCM](ERROR): CRC does not match. Expected:0x35031 got:0x44786
2017-11-10T05:51:27.366Z,1510293087.366 [PNI_TCM](ERROR): CRC does not match. Expected:0x42038 got:0x17024
2017-11-10T05:51:28.978Z,1510293088.978 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-11-10T05:51:35.376Z,1510293095.376 [PNI_TCM](ERROR): CRC does not match. Expected:0x23763 got:0x0
2017-11-10T05:51:40.173Z,1510293100.173 [PNI_TCM](ERROR): CRC does not match. Expected:0x30020 got:0x29367
2017-11-10T05:51:41.770Z,1510293101.770 [PNI_TCM](ERROR): CRC does not match. Expected:0x42038 got:0x17024
2017-11-10T05:51:43.366Z,1510293103.366 [PNI_TCM](ERROR): CRC does not match. Expected:0x155 got:0x49910
2017-11-10T05:51:44.970Z,1510293104.970 [PNI_TCM](ERROR): CRC does not match. Expected:0x4039 got:0x44682
2017-11-10T05:51:46.573Z,1510293106.573 [PNI_TCM](ERROR): CRC does not match. Expected:0x62300 got:0x32890
2017-11-10T05:51:49.783Z,1510293109.783 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-11-10T05:51:51.371Z,1510293111.371 [PNI_TCM](ERROR): CRC does not match. Expected:0x45898 got:0x44716
2017-11-10T05:51:56.175Z,1510293116.175 [PNI_TCM](ERROR): CRC does not match. Expected:0x29589 got:0x16384
2017-11-10T05:52:06.935Z,1510293126.935 [NAL9602](INFO): SBD MO Status=0, MOMSN=2607, MT Status=0, MTMSN=0
2017-11-10T05:52:06.936Z,1510293126.936 [NAL9602](INFO): No messages in MT queue
2017-11-10T05:52:06.936Z,1510293126.936 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2017-11-10T05:52:07.734Z,1510293127.734 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T05:52:07.734Z,1510293127.734 [NAL9602] Data Fault, FailCount= 1
2017-11-10T05:52:07.734Z,1510293127.734 [NAL9602](ERROR): Data Fault
2017-11-10T05:52:07.804Z,1510293127.804 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T05:52:08.130Z,1510293128.130 [NAL9602](INFO): Powering down
2017-11-10T05:52:09.048Z,1510293129.048 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T05:52:09.048Z,1510293129.048 [NAL9602] No Fault, FailCount= 1
2017-11-10T05:52:38.530Z,1510293158.530 [NAL9602](INFO): Powering up NAL9602
2017-11-10T05:52:44.962Z,1510293164.962 [PNI_TCM](ERROR): CRC does not match. Expected:0x40223 got:0x17018
2017-11-10T05:52:49.735Z,1510293169.735 [NAL9602](INFO): NAL9602 initialized
2017-11-10T05:52:50.574Z,1510293170.574 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-11-10T05:52:53.770Z,1510293173.770 [PNI_TCM](ERROR): CRC does not match. Expected:0x21926 got:0x6336
2017-11-10T05:53:21.481Z,1510293201.481 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:53:21.481Z,1510293201.481 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2017-11-10T05:53:21.481Z,1510293201.481 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:53:21.506Z,1510293201.506 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:53:21.877Z,1510293201.877 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:53:21.877Z,1510293201.877 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2017-11-10T05:53:22.258Z,1510293202.258 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:53:22.259Z,1510293202.259 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:53:22.259Z,1510293202.259 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:55:56.502Z,1510293356.502 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T05:50:56.1Z
2017-11-10T05:55:56.503Z,1510293356.503 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T05:55:56.503Z,1510293356.503 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T05:56:00.582Z,1510293360.582 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0032.lzma
2017-11-10T05:56:01.373Z,1510293361.373 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0032.lzma.bak
2017-11-10T05:56:01.373Z,1510293361.373 [DataOverHttps](INFO): SBD MOMSN=5225759
2017-11-10T05:56:10.752Z,1510293370.752 [DataOverHttps](INFO): Sending 241 bytes from file Logs/20171110T043737/Express0033.lzma
2017-11-10T05:56:11.553Z,1510293371.553 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0033.lzma.bak
2017-11-10T05:56:11.554Z,1510293371.554 [DataOverHttps](INFO): SBD MOMSN=5225761
2017-11-10T05:56:12.756Z,1510293372.756 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T05:56:12.756Z,1510293372.756 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T05:56:12.756Z,1510293372.756 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T05:56:22.508Z,1510293382.508 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:56:22.508Z,1510293382.508 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2017-11-10T05:56:22.509Z,1510293382.509 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:56:22.594Z,1510293382.594 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:56:22.973Z,1510293382.973 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:56:22.974Z,1510293382.974 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2017-11-10T05:56:23.311Z,1510293383.311 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:56:23.311Z,1510293383.311 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:56:23.312Z,1510293383.312 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T05:56:30.834Z,1510293390.834 [NAL9602](INFO): Powering down
2017-11-10T05:57:49.455Z,1510293469.455 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T05:59:03.915Z,1510293543.915 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:59:03.915Z,1510293543.915 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T05:59:03.985Z,1510293543.985 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:59:03.986Z,1510293543.986 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:59:03.986Z,1510293543.986 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:59:03.986Z,1510293543.986 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T05:59:03.986Z,1510293543.986 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:59:04.274Z,1510293544.274 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:59:04.389Z,1510293544.389 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:59:04.474Z,1510293544.474 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:59:05.876Z,1510293545.876 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:59:05.876Z,1510293545.876 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T05:59:06.089Z,1510293546.089 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:59:06.090Z,1510293546.090 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:59:06.090Z,1510293546.090 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:59:06.090Z,1510293546.090 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T05:59:06.090Z,1510293546.090 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:59:06.280Z,1510293546.280 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:59:06.493Z,1510293546.493 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:59:06.576Z,1510293546.576 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:59:07.877Z,1510293547.877 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:59:07.877Z,1510293547.877 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T05:59:08.193Z,1510293548.193 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:59:08.193Z,1510293548.193 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:59:08.193Z,1510293548.193 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:59:08.194Z,1510293548.194 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T05:59:08.194Z,1510293548.194 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:59:08.323Z,1510293548.323 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:59:08.597Z,1510293548.597 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:59:08.805Z,1510293548.805 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:59:10.288Z,1510293550.288 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:59:10.288Z,1510293550.288 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T05:59:10.421Z,1510293550.421 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:59:10.421Z,1510293550.421 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:59:10.421Z,1510293550.421 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:59:10.422Z,1510293550.422 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T05:59:10.422Z,1510293550.422 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:59:10.685Z,1510293550.685 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:59:10.825Z,1510293550.825 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:59:10.930Z,1510293550.930 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:59:12.282Z,1510293552.282 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T05:59:12.282Z,1510293552.282 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T05:59:12.545Z,1510293552.545 [Rowe_600LCM](INFO): Initializing
2017-11-10T05:59:12.545Z,1510293552.545 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T05:59:12.545Z,1510293552.545 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T05:59:12.545Z,1510293552.545 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T05:59:12.546Z,1510293552.546 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T05:59:12.690Z,1510293552.690 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:59:12.691Z,1510293552.691 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T05:59:12.949Z,1510293552.949 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T05:59:13.083Z,1510293553.083 [Rowe_600LCM](INFO): Powering down
2017-11-10T05:59:23.507Z,1510293563.507 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T05:59:23.507Z,1510293563.507 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2017-11-10T05:59:23.507Z,1510293563.507 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T05:59:23.520Z,1510293563.520 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T05:59:23.917Z,1510293563.917 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T05:59:23.917Z,1510293563.917 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2017-11-10T05:59:24.304Z,1510293564.304 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T05:59:24.305Z,1510293564.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T05:59:24.305Z,1510293564.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:01:13.218Z,1510293673.218 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T06:01:13.218Z,1510293673.218 [Default:CheckIn:C.Wait] Stopped
2017-11-10T06:01:13.218Z,1510293673.218 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T06:01:13.218Z,1510293673.218 [Default:CheckIn:D] Running Loop=1
2017-11-10T06:01:13.623Z,1510293673.623 [Default:CheckIn:D] Stopped
2017-11-10T06:01:13.623Z,1510293673.623 [Default:CheckIn:E] Running Loop=1
2017-11-10T06:01:18.455Z,1510293678.455 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 79.675065 min 
2017-11-10T06:01:18.455Z,1510293678.455 [Default:CheckIn:E] Stopped
2017-11-10T06:01:18.455Z,1510293678.455 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T06:01:18.455Z,1510293678.455 [Default:CheckIn] Stopped
2017-11-10T06:01:18.455Z,1510293678.455 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T06:01:18.456Z,1510293678.456 [Default:CheckIn](INFO): Running loop #9
2017-11-10T06:01:18.456Z,1510293678.456 [Default:CheckIn] Running Loop=9
2017-11-10T06:01:18.456Z,1510293678.456 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T06:01:18.456Z,1510293678.456 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T06:01:18.950Z,1510293678.950 [NAL9602](INFO): Powering up
2017-11-10T06:01:30.146Z,1510293690.146 [NAL9602](INFO): NAL9602 initialized
2017-11-10T06:01:46.570Z,1510293706.570 [PNI_TCM](ERROR): CRC does not match. Expected:0x49284 got:0x49670
2017-11-10T06:01:48.183Z,1510293708.183 [PNI_TCM](ERROR): CRC does not match. Expected:0x6089 got:0x17018
2017-11-10T06:01:51.383Z,1510293711.383 [PNI_TCM](ERROR): CRC does not match. Expected:0x4123 got:0x1737
2017-11-10T06:01:52.971Z,1510293712.971 [PNI_TCM](ERROR): CRC does not match. Expected:0x553 got:0x58631
2017-11-10T06:01:56.174Z,1510293716.174 [PNI_TCM](ERROR): CRC does not match. Expected:0x54507 got:0x49670
2017-11-10T06:02:24.655Z,1510293744.655 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:02:24.656Z,1510293744.656 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2017-11-10T06:02:24.656Z,1510293744.656 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:02:24.669Z,1510293744.669 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:02:25.114Z,1510293745.114 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:02:25.114Z,1510293745.114 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2017-11-10T06:02:25.462Z,1510293745.462 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:02:25.462Z,1510293745.462 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:02:25.463Z,1510293745.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:03:03.007Z,1510293783.007 [NAL9602](INFO): SBD MO Status=2, MOMSN=2608, MT Status=2, MTMSN=0
2017-11-10T06:03:03.008Z,1510293783.008 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-11-10T06:03:04.638Z,1510293784.638 [BPC1](ERROR): Failed to receive battery data
2017-11-10T06:03:04.638Z,1510293784.638 [BPC1] Communications Fault, FailCount= 1
2017-11-10T06:03:04.638Z,1510293784.638 [BPC1](ERROR): Communications Fault
2017-11-10T06:03:04.667Z,1510293784.667 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T06:03:05.870Z,1510293785.870 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:03:05.870Z,1510293785.870 [BPC1] No Fault, FailCount= 1
2017-11-10T06:03:27.470Z,1510293807.470 [BPC1](ERROR): Failed to parse message.
2017-11-10T06:03:27.471Z,1510293807.471 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T06:03:27.471Z,1510293807.471 [BPC1] Data Fault, FailCount= 2
2017-11-10T06:03:27.471Z,1510293807.471 [BPC1](ERROR): Data Fault
2017-11-10T06:03:27.518Z,1510293807.518 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T06:03:28.713Z,1510293808.713 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:03:28.713Z,1510293808.713 [BPC1] No Fault, FailCount= 2
2017-11-10T06:05:13.513Z,1510293913.513 [BPC1](ERROR): Failed to parse message.
2017-11-10T06:05:13.513Z,1510293913.513 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T06:05:13.513Z,1510293913.513 [BPC1] Data Fault, FailCount= 1
2017-11-10T06:05:13.513Z,1510293913.513 [BPC1](ERROR): Data Fault
2017-11-10T06:05:13.568Z,1510293913.568 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T06:05:17.331Z,1510293917.331 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:05:17.331Z,1510293917.331 [BPC1] No Fault, FailCount= 1
2017-11-10T06:05:25.705Z,1510293925.705 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:05:25.706Z,1510293925.706 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2017-11-10T06:05:25.706Z,1510293925.706 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:05:25.731Z,1510293925.731 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:05:26.136Z,1510293926.136 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:05:26.136Z,1510293926.136 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2017-11-10T06:05:26.502Z,1510293926.502 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:05:26.502Z,1510293926.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:05:26.502Z,1510293926.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:06:18.517Z,1510293978.517 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T06:01:18.5Z
2017-11-10T06:06:18.517Z,1510293978.517 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T06:06:18.517Z,1510293978.517 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T06:06:23.117Z,1510293983.117 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0036.lzma
2017-11-10T06:06:23.917Z,1510293983.917 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0036.lzma.bak
2017-11-10T06:06:23.917Z,1510293983.917 [DataOverHttps](INFO): SBD MOMSN=5225771
2017-11-10T06:06:33.139Z,1510293993.139 [DataOverHttps](INFO): Sending 205 bytes from file Logs/20171110T043737/Express0037.lzma
2017-11-10T06:06:33.546Z,1510293993.546 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T06:06:33.937Z,1510293993.937 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0037.lzma.bak
2017-11-10T06:06:33.938Z,1510293993.938 [DataOverHttps](INFO): SBD MOMSN=5225773
2017-11-10T06:06:35.057Z,1510293995.057 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T06:06:35.057Z,1510293995.057 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T06:06:35.057Z,1510293995.057 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T06:07:04.070Z,1510294024.070 [NAL9602](INFO): Powering down
2017-11-10T06:07:49.702Z,1510294069.702 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T06:08:26.875Z,1510294106.875 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:08:26.876Z,1510294106.876 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2017-11-10T06:08:26.876Z,1510294106.876 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:08:26.905Z,1510294106.905 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:08:27.286Z,1510294107.286 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:08:27.286Z,1510294107.286 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2017-11-10T06:08:27.678Z,1510294107.678 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:08:27.679Z,1510294107.679 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:08:27.679Z,1510294107.679 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:09:12.551Z,1510294152.551 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:09:12.551Z,1510294152.551 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T06:09:12.593Z,1510294152.593 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:09:12.593Z,1510294152.593 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:09:12.593Z,1510294152.593 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:09:12.594Z,1510294152.594 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T06:09:12.594Z,1510294152.594 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:09:12.951Z,1510294152.951 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:09:12.997Z,1510294152.997 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:09:13.089Z,1510294153.089 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:09:14.582Z,1510294154.582 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:09:14.582Z,1510294154.582 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T06:09:14.705Z,1510294154.705 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:09:14.705Z,1510294154.705 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:09:14.705Z,1510294154.705 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:09:14.706Z,1510294154.706 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T06:09:14.706Z,1510294154.706 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:09:14.974Z,1510294154.974 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:09:15.109Z,1510294155.109 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:09:15.192Z,1510294155.192 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:09:16.586Z,1510294156.586 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:09:16.586Z,1510294156.586 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T06:09:16.809Z,1510294156.809 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:09:16.809Z,1510294156.809 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:09:16.809Z,1510294156.809 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:09:16.809Z,1510294156.809 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T06:09:16.810Z,1510294156.810 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:09:16.947Z,1510294156.947 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:09:17.213Z,1510294157.213 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:09:17.345Z,1510294157.345 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:09:18.960Z,1510294158.960 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:09:18.960Z,1510294158.960 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T06:09:18.969Z,1510294158.969 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:09:18.970Z,1510294158.970 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:09:18.970Z,1510294158.970 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:09:18.970Z,1510294158.970 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T06:09:18.970Z,1510294158.970 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:09:19.348Z,1510294159.348 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:09:19.373Z,1510294159.373 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:09:19.499Z,1510294159.499 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:09:20.960Z,1510294160.960 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:09:20.960Z,1510294160.960 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T06:09:21.113Z,1510294161.113 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:09:21.113Z,1510294161.113 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:09:21.114Z,1510294161.114 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:09:21.114Z,1510294161.114 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T06:09:21.114Z,1510294161.114 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:09:21.373Z,1510294161.373 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:09:21.373Z,1510294161.373 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:09:21.517Z,1510294161.517 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:09:21.610Z,1510294161.610 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:10:07.355Z,1510294207.355 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T06:10:07.355Z,1510294207.355 [BPC1] Data Fault, FailCount= 1
2017-11-10T06:10:07.355Z,1510294207.355 [BPC1](ERROR): Data Fault
2017-11-10T06:10:07.412Z,1510294207.412 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T06:10:08.589Z,1510294208.589 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:10:08.589Z,1510294208.589 [BPC1] No Fault, FailCount= 1
2017-11-10T06:10:17.351Z,1510294217.351 [PNI_TCM](ERROR): CRC does not match. Expected:0x15476 got:0x16800
2017-11-10T06:10:39.753Z,1510294239.753 [PNI_TCM](ERROR): CRC does not match. Expected:0x15973 got:0x3612
2017-11-10T06:11:12.562Z,1510294272.562 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T06:11:12.562Z,1510294272.562 [BPC1] Data Fault, FailCount= 1
2017-11-10T06:11:12.562Z,1510294272.562 [BPC1](ERROR): Data Fault
2017-11-10T06:11:12.622Z,1510294272.622 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T06:11:13.773Z,1510294273.773 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:11:13.773Z,1510294273.773 [BPC1] No Fault, FailCount= 1
2017-11-10T06:11:27.777Z,1510294287.777 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:11:27.777Z,1510294287.777 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2017-11-10T06:11:27.777Z,1510294287.777 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:11:27.850Z,1510294287.850 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:11:28.271Z,1510294288.271 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:11:28.271Z,1510294288.271 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2017-11-10T06:11:28.598Z,1510294288.598 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:11:28.599Z,1510294288.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:11:28.599Z,1510294288.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:11:33.772Z,1510294293.772 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T06:11:33.772Z,1510294293.772 [BPC1] Data Fault, FailCount= 2
2017-11-10T06:11:33.772Z,1510294293.772 [BPC1](ERROR): Data Fault
2017-11-10T06:11:33.831Z,1510294293.831 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T06:11:35.073Z,1510294295.073 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:11:35.073Z,1510294295.073 [BPC1] No Fault, FailCount= 2
2017-11-10T06:11:35.477Z,1510294295.477 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T06:11:35.477Z,1510294295.477 [Default:CheckIn:C.Wait] Stopped
2017-11-10T06:11:35.477Z,1510294295.477 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T06:11:35.477Z,1510294295.477 [Default:CheckIn:D] Running Loop=1
2017-11-10T06:11:35.782Z,1510294295.782 [Default:CheckIn:D] Stopped
2017-11-10T06:11:35.782Z,1510294295.782 [Default:CheckIn:E] Running Loop=1
2017-11-10T06:11:36.229Z,1510294296.229 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 90.044377 min 
2017-11-10T06:11:36.230Z,1510294296.230 [Default:CheckIn:E] Stopped
2017-11-10T06:11:36.230Z,1510294296.230 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T06:11:36.230Z,1510294296.230 [Default:CheckIn] Stopped
2017-11-10T06:11:36.230Z,1510294296.230 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T06:11:36.230Z,1510294296.230 [Default:CheckIn](INFO): Running loop #10
2017-11-10T06:11:36.230Z,1510294296.230 [Default:CheckIn] Running Loop=10
2017-11-10T06:11:36.230Z,1510294296.230 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T06:11:36.230Z,1510294296.230 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T06:11:41.357Z,1510294301.357 [NAL9602](INFO): Powering up
2017-11-10T06:11:52.230Z,1510294312.230 [NAL9602](INFO): NAL9602 initialized
2017-11-10T06:11:53.030Z,1510294313.030 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T06:11:53.030Z,1510294313.030 [NAL9602] Data Fault, FailCount= 2
2017-11-10T06:11:53.030Z,1510294313.030 [NAL9602](ERROR): Data Fault
2017-11-10T06:11:53.124Z,1510294313.124 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T06:11:53.434Z,1510294313.434 [NAL9602](INFO): Powering down
2017-11-10T06:11:54.291Z,1510294314.291 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T06:11:54.291Z,1510294314.291 [NAL9602] No Fault, FailCount= 2
2017-11-10T06:12:23.835Z,1510294343.835 [NAL9602](INFO): Powering up NAL9602
2017-11-10T06:12:35.030Z,1510294355.030 [NAL9602](INFO): NAL9602 initialized
2017-11-10T06:13:01.868Z,1510294381.868 [NAL9602](INFO): SBD MO Status=2, MOMSN=2608, MT Status=2, MTMSN=0
2017-11-10T06:13:01.868Z,1510294381.868 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-11-10T06:14:12.320Z,1510294452.320 [BPC1](ERROR): Failed to receive battery data
2017-11-10T06:14:12.320Z,1510294452.320 [BPC1] Communications Fault, FailCount= 1
2017-11-10T06:14:12.320Z,1510294452.320 [BPC1](ERROR): Communications Fault
2017-11-10T06:14:12.346Z,1510294452.346 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T06:14:13.541Z,1510294453.541 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:14:13.541Z,1510294453.541 [BPC1] No Fault, FailCount= 1
2017-11-10T06:14:28.746Z,1510294468.746 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:14:28.747Z,1510294468.747 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2017-11-10T06:14:28.747Z,1510294468.747 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:14:28.760Z,1510294468.760 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:14:29.163Z,1510294469.163 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:14:29.163Z,1510294469.163 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2017-11-10T06:14:29.528Z,1510294469.528 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:14:29.529Z,1510294469.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:14:29.529Z,1510294469.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:16:36.313Z,1510294596.313 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T06:11:36.2Z
2017-11-10T06:16:36.313Z,1510294596.313 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T06:16:36.313Z,1510294596.313 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T06:16:40.772Z,1510294600.772 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0040.lzma
2017-11-10T06:16:41.573Z,1510294601.573 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0040.lzma.bak
2017-11-10T06:16:41.574Z,1510294601.574 [DataOverHttps](INFO): SBD MOMSN=5225782
2017-11-10T06:16:50.905Z,1510294610.905 [DataOverHttps](INFO): Sending 292 bytes from file Logs/20171110T043737/Express0041.lzma
2017-11-10T06:16:51.705Z,1510294611.705 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0041.lzma.bak
2017-11-10T06:16:51.705Z,1510294611.705 [DataOverHttps](INFO): SBD MOMSN=5225784
2017-11-10T06:16:52.838Z,1510294612.838 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-11-10T06:16:52.839Z,1510294612.839 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-11-10T06:16:52.901Z,1510294612.901 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T06:16:52.901Z,1510294612.901 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T06:16:52.901Z,1510294612.901 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T06:17:29.851Z,1510294649.851 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:17:29.852Z,1510294649.852 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2017-11-10T06:17:29.852Z,1510294649.852 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:17:29.885Z,1510294649.885 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:17:30.284Z,1510294650.284 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:17:30.284Z,1510294650.284 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2017-11-10T06:17:30.650Z,1510294650.650 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:17:30.651Z,1510294650.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:17:30.651Z,1510294650.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:17:33.422Z,1510294653.422 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T06:17:33.423Z,1510294653.423 [BPC1] Data Fault, FailCount= 1
2017-11-10T06:17:33.423Z,1510294653.423 [BPC1](ERROR): Data Fault
2017-11-10T06:17:33.493Z,1510294653.493 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T06:17:34.719Z,1510294654.719 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:17:34.719Z,1510294654.719 [BPC1] No Fault, FailCount= 1
2017-11-10T06:17:40.198Z,1510294660.198 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T06:17:49.861Z,1510294669.861 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T06:18:10.726Z,1510294690.726 [NAL9602](INFO): Powering down
2017-11-10T06:19:21.375Z,1510294761.375 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:19:21.376Z,1510294761.376 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T06:19:21.485Z,1510294761.485 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:19:21.485Z,1510294761.485 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:19:21.485Z,1510294761.485 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:19:21.485Z,1510294761.485 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T06:19:21.485Z,1510294761.485 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:19:21.750Z,1510294761.750 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:19:21.889Z,1510294761.889 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:19:21.973Z,1510294761.973 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:19:23.343Z,1510294763.343 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:19:23.343Z,1510294763.343 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T06:19:23.589Z,1510294763.589 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:19:23.589Z,1510294763.589 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:19:23.589Z,1510294763.589 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:19:23.590Z,1510294763.590 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T06:19:23.590Z,1510294763.590 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:19:23.750Z,1510294763.750 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:19:23.993Z,1510294763.993 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:19:24.103Z,1510294764.103 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:19:25.355Z,1510294765.355 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:19:25.356Z,1510294765.356 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T06:19:25.717Z,1510294765.717 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:19:25.717Z,1510294765.717 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:19:25.717Z,1510294765.717 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:19:25.718Z,1510294765.718 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T06:19:25.718Z,1510294765.718 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:19:25.814Z,1510294765.814 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:19:26.121Z,1510294766.121 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:19:26.288Z,1510294766.288 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:19:27.783Z,1510294767.783 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:19:27.783Z,1510294767.783 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T06:19:27.908Z,1510294767.908 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:19:27.908Z,1510294767.908 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:19:27.908Z,1510294767.908 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:19:27.908Z,1510294767.908 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T06:19:27.908Z,1510294767.908 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:19:28.148Z,1510294768.148 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:19:28.313Z,1510294768.313 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:19:28.396Z,1510294768.396 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:19:29.744Z,1510294769.744 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:19:29.744Z,1510294769.744 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T06:19:30.009Z,1510294770.009 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:19:30.009Z,1510294770.009 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:19:30.009Z,1510294770.009 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:19:30.009Z,1510294770.009 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T06:19:30.010Z,1510294770.010 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:19:30.145Z,1510294770.145 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:19:30.146Z,1510294770.146 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:19:30.413Z,1510294770.413 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:19:30.574Z,1510294770.574 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:20:30.886Z,1510294830.886 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:20:30.886Z,1510294830.886 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2017-11-10T06:20:30.886Z,1510294830.886 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:20:30.900Z,1510294830.900 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:20:31.310Z,1510294831.310 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:20:31.310Z,1510294831.310 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2017-11-10T06:20:31.687Z,1510294831.687 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:20:31.688Z,1510294831.688 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:20:31.688Z,1510294831.688 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:21:53.023Z,1510294913.023 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T06:21:53.023Z,1510294913.023 [Default:CheckIn:C.Wait] Stopped
2017-11-10T06:21:53.023Z,1510294913.023 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T06:21:53.024Z,1510294913.024 [Default:CheckIn:D] Running Loop=1
2017-11-10T06:21:53.419Z,1510294913.419 [Default:CheckIn:D] Stopped
2017-11-10T06:21:53.420Z,1510294913.420 [Default:CheckIn:E] Running Loop=1
2017-11-10T06:21:53.818Z,1510294913.818 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 100.338330 min 
2017-11-10T06:21:53.818Z,1510294913.818 [Default:CheckIn:E] Stopped
2017-11-10T06:21:53.818Z,1510294913.818 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T06:21:53.818Z,1510294913.818 [Default:CheckIn] Stopped
2017-11-10T06:21:53.818Z,1510294913.818 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T06:21:53.818Z,1510294913.818 [Default:CheckIn](INFO): Running loop #11
2017-11-10T06:21:53.818Z,1510294913.818 [Default:CheckIn] Running Loop=11
2017-11-10T06:21:53.819Z,1510294913.819 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T06:21:53.819Z,1510294913.819 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T06:21:57.313Z,1510294917.313 [NAL9602](INFO): Powering up
2017-11-10T06:22:08.218Z,1510294928.218 [NAL9602](INFO): NAL9602 initialized
2017-11-10T06:22:29.445Z,1510294949.445 [BPC1](ERROR): Failed to receive battery data
2017-11-10T06:22:29.445Z,1510294949.445 [BPC1] Communications Fault, FailCount= 1
2017-11-10T06:22:29.445Z,1510294949.445 [BPC1](ERROR): Communications Fault
2017-11-10T06:22:29.537Z,1510294949.537 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T06:22:30.703Z,1510294950.703 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:22:30.703Z,1510294950.703 [BPC1] No Fault, FailCount= 1
2017-11-10T06:22:40.214Z,1510294960.214 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-11-10T06:22:40.297Z,1510294960.297 [NAL9602](FAULT): received: 
+CSQ:0

OK08, 2, 0, 0, 0

OK
2017-11-10T06:22:40.297Z,1510294960.297 [NAL9602] Data Fault, FailCount= 3
2017-11-10T06:22:40.297Z,1510294960.297 [NAL9602](ERROR): Data Fault
2017-11-10T06:22:40.380Z,1510294960.380 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T06:22:40.614Z,1510294960.614 [NAL9602](INFO): Powering down
2017-11-10T06:22:41.496Z,1510294961.496 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T06:22:41.496Z,1510294961.496 [NAL9602] No Fault, FailCount= 3
2017-11-10T06:23:10.982Z,1510294990.982 [NAL9602](INFO): Powering up NAL9602
2017-11-10T06:23:22.182Z,1510295002.182 [NAL9602](INFO): NAL9602 initialized
2017-11-10T06:23:22.982Z,1510295002.982 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T06:23:22.982Z,1510295002.982 [NAL9602] Data Fault, FailCount= 4
2017-11-10T06:23:22.982Z,1510295002.982 [NAL9602](ERROR): Data Fault
2017-11-10T06:23:23.064Z,1510295003.064 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T06:23:23.382Z,1510295003.382 [NAL9602](INFO): Powering down
2017-11-10T06:23:24.247Z,1510295004.247 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T06:23:24.247Z,1510295004.247 [NAL9602] No Fault, FailCount= 4
2017-11-10T06:23:31.827Z,1510295011.827 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:23:31.827Z,1510295011.827 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2017-11-10T06:23:31.827Z,1510295011.827 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:23:31.869Z,1510295011.869 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:23:32.239Z,1510295012.239 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:23:32.239Z,1510295012.239 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2017-11-10T06:23:32.626Z,1510295012.626 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:23:32.627Z,1510295012.627 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:23:32.627Z,1510295012.627 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:23:53.386Z,1510295033.386 [NAL9602](INFO): Powering up NAL9602
2017-11-10T06:23:59.834Z,1510295039.834 [BPC1](ERROR): Failed to receive battery data
2017-11-10T06:23:59.835Z,1510295039.835 [BPC1] Communications Fault, FailCount= 1
2017-11-10T06:23:59.835Z,1510295039.835 [BPC1](ERROR): Communications Fault
2017-11-10T06:23:59.861Z,1510295039.861 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T06:24:01.067Z,1510295041.067 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:24:01.067Z,1510295041.067 [BPC1] No Fault, FailCount= 1
2017-11-10T06:24:04.202Z,1510295044.202 [NAL9602](INFO): NAL9602 initialized
2017-11-10T06:26:32.975Z,1510295192.975 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:26:32.975Z,1510295192.975 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2017-11-10T06:26:32.975Z,1510295192.976 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:26:32.989Z,1510295192.989 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:26:33.385Z,1510295193.385 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:26:33.385Z,1510295193.385 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2017-11-10T06:26:33.775Z,1510295193.775 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:26:33.775Z,1510295193.775 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:26:33.775Z,1510295193.775 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:26:54.233Z,1510295214.233 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T06:21:53.8Z
2017-11-10T06:26:54.233Z,1510295214.233 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T06:26:54.233Z,1510295214.233 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T06:26:59.702Z,1510295219.702 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0044.lzma
2017-11-10T06:27:00.493Z,1510295220.493 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0044.lzma.bak
2017-11-10T06:27:00.493Z,1510295220.493 [DataOverHttps](INFO): SBD MOMSN=5225795
2017-11-10T06:27:00.545Z,1510295220.545 [PNI_TCM](ERROR): CRC does not match. Expected:0x61136 got:0x49162
2017-11-10T06:27:06.562Z,1510295226.562 [PNI_TCM](ERROR): CRC does not match. Expected:0x49689 got:0x33308
2017-11-10T06:27:09.761Z,1510295229.761 [DataOverHttps](INFO): Sending 328 bytes from file Logs/20171110T043737/Express0045.lzma
2017-11-10T06:27:10.545Z,1510295230.545 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0045.lzma.bak
2017-11-10T06:27:10.546Z,1510295230.546 [DataOverHttps](INFO): SBD MOMSN=5225797
2017-11-10T06:27:11.674Z,1510295231.674 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T06:27:11.674Z,1510295231.674 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T06:27:11.674Z,1510295231.674 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T06:27:14.793Z,1510295234.793 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T06:27:45.262Z,1510295265.262 [NAL9602](INFO): Powering down
2017-11-10T06:27:50.115Z,1510295270.115 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T06:28:27.664Z,1510295307.664 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T06:28:27.665Z,1510295307.665 [BPC1] Data Fault, FailCount= 1
2017-11-10T06:28:27.665Z,1510295307.665 [BPC1](ERROR): Data Fault
2017-11-10T06:28:27.689Z,1510295307.689 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T06:28:28.894Z,1510295308.894 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:28:28.894Z,1510295308.894 [BPC1] No Fault, FailCount= 1
2017-11-10T06:29:30.126Z,1510295370.126 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:29:30.126Z,1510295370.126 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T06:29:30.466Z,1510295370.466 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:29:30.466Z,1510295370.466 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:29:30.466Z,1510295370.466 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:29:30.466Z,1510295370.466 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T06:29:30.466Z,1510295370.466 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:29:30.563Z,1510295370.563 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:29:30.871Z,1510295370.871 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:29:31.078Z,1510295371.078 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:29:32.524Z,1510295372.524 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:29:32.524Z,1510295372.524 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T06:29:32.693Z,1510295372.693 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:29:32.693Z,1510295372.693 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:29:32.693Z,1510295372.693 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:29:32.693Z,1510295372.693 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T06:29:32.693Z,1510295372.693 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:29:32.921Z,1510295372.921 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:29:33.097Z,1510295373.097 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:29:33.178Z,1510295373.178 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:29:34.109Z,1510295374.109 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:29:34.109Z,1510295374.109 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2017-11-10T06:29:34.109Z,1510295374.109 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:29:34.122Z,1510295374.122 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:29:34.532Z,1510295374.532 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:29:34.532Z,1510295374.532 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T06:29:34.533Z,1510295374.533 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:29:34.533Z,1510295374.533 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2017-11-10T06:29:34.793Z,1510295374.793 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:29:34.793Z,1510295374.793 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:29:34.793Z,1510295374.793 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:29:34.794Z,1510295374.794 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T06:29:34.794Z,1510295374.794 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:29:34.915Z,1510295374.915 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:29:34.916Z,1510295374.916 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:29:34.916Z,1510295374.916 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:29:34.941Z,1510295374.941 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:29:35.197Z,1510295375.197 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:29:35.414Z,1510295375.414 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:29:36.943Z,1510295376.943 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:29:36.943Z,1510295376.943 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T06:29:37.029Z,1510295377.029 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:29:37.029Z,1510295377.029 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:29:37.030Z,1510295377.030 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:29:37.030Z,1510295377.030 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T06:29:37.030Z,1510295377.030 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:29:37.341Z,1510295377.341 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:29:37.433Z,1510295377.433 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:29:37.516Z,1510295377.516 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:29:38.970Z,1510295378.970 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:29:38.970Z,1510295378.970 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T06:29:39.133Z,1510295379.133 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:29:39.133Z,1510295379.133 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:29:39.133Z,1510295379.133 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:29:39.133Z,1510295379.133 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T06:29:39.134Z,1510295379.134 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:29:39.333Z,1510295379.333 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:29:39.334Z,1510295379.334 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:29:39.537Z,1510295379.537 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:29:39.618Z,1510295379.618 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:32:11.812Z,1510295531.812 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T06:32:11.812Z,1510295531.812 [Default:CheckIn:C.Wait] Stopped
2017-11-10T06:32:11.812Z,1510295531.812 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T06:32:11.812Z,1510295531.812 [Default:CheckIn:D] Running Loop=1
2017-11-10T06:32:12.219Z,1510295532.219 [Default:CheckIn:D] Stopped
2017-11-10T06:32:12.219Z,1510295532.219 [Default:CheckIn:E] Running Loop=1
2017-11-10T06:32:12.619Z,1510295532.619 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 110.651652 min 
2017-11-10T06:32:12.619Z,1510295532.619 [Default:CheckIn:E] Stopped
2017-11-10T06:32:12.619Z,1510295532.619 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T06:32:12.619Z,1510295532.619 [Default:CheckIn] Stopped
2017-11-10T06:32:12.619Z,1510295532.619 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T06:32:12.619Z,1510295532.619 [Default:CheckIn](INFO): Running loop #12
2017-11-10T06:32:12.619Z,1510295532.619 [Default:CheckIn] Running Loop=12
2017-11-10T06:32:12.620Z,1510295532.620 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T06:32:12.620Z,1510295532.620 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T06:32:16.135Z,1510295536.135 [NAL9602](INFO): Powering up
2017-11-10T06:32:18.692Z,1510295538.692 [BPC1](ERROR): Failed to receive battery data
2017-11-10T06:32:18.692Z,1510295538.692 [BPC1] Communications Fault, FailCount= 1
2017-11-10T06:32:18.692Z,1510295538.692 [BPC1](ERROR): Communications Fault
2017-11-10T06:32:18.742Z,1510295538.742 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T06:32:19.917Z,1510295539.917 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:32:19.917Z,1510295539.917 [BPC1] No Fault, FailCount= 1
2017-11-10T06:32:27.062Z,1510295547.062 [NAL9602](INFO): NAL9602 initialized
2017-11-10T06:32:35.115Z,1510295555.115 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:32:35.115Z,1510295555.115 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2017-11-10T06:32:35.115Z,1510295555.115 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:32:35.128Z,1510295555.128 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:32:35.517Z,1510295555.517 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:32:35.517Z,1510295555.517 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2017-11-10T06:32:35.911Z,1510295555.911 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:32:35.911Z,1510295555.911 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:32:35.911Z,1510295555.911 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:32:59.062Z,1510295579.062 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-11-10T06:32:59.137Z,1510295579.137 [NAL9602](FAULT): received: 
+CSQ:0

OK08, 2, 0, 0, 0

OK
2017-11-10T06:32:59.137Z,1510295579.137 [NAL9602] Data Fault, FailCount= 5
2017-11-10T06:32:59.137Z,1510295579.137 [NAL9602](ERROR): Data Fault
2017-11-10T06:32:59.227Z,1510295579.227 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T06:32:59.228Z,1510295579.228 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-10T06:32:59.462Z,1510295579.462 [NAL9602](INFO): Powering down
2017-11-10T06:32:59.523Z,1510295579.523 [CBIT](INFO): Critical error at 20171110T063259
2017-11-10T06:33:45.852Z,1510295625.852 [BPC1](ERROR): Failed to parse message.
2017-11-10T06:33:45.852Z,1510295625.852 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T06:33:45.852Z,1510295625.852 [BPC1] Data Fault, FailCount= 1
2017-11-10T06:33:45.852Z,1510295625.852 [BPC1](ERROR): Data Fault
2017-11-10T06:33:45.913Z,1510295625.913 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T06:33:47.083Z,1510295627.083 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:33:47.083Z,1510295627.083 [BPC1] No Fault, FailCount= 1
2017-11-10T06:34:59.505Z,1510295699.505 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T06:34:59.506Z,1510295699.506 [NAL9602] No Fault, FailCount= 5
2017-11-10T06:34:59.806Z,1510295699.806 [NAL9602](INFO): Powering up NAL9602
2017-11-10T06:35:11.006Z,1510295711.006 [NAL9602](INFO): NAL9602 initialized
2017-11-10T06:35:11.810Z,1510295711.810 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T06:35:11.810Z,1510295711.810 [NAL9602] Data Fault, FailCount= 1
2017-11-10T06:35:11.810Z,1510295711.810 [NAL9602](ERROR): Data Fault
2017-11-10T06:35:11.888Z,1510295711.888 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T06:35:12.210Z,1510295712.210 [NAL9602](INFO): Powering down
2017-11-10T06:35:13.072Z,1510295713.072 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T06:35:13.072Z,1510295713.072 [NAL9602] No Fault, FailCount= 1
2017-11-10T06:35:36.232Z,1510295736.232 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:35:36.232Z,1510295736.232 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2017-11-10T06:35:36.233Z,1510295736.233 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:35:36.246Z,1510295736.246 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:35:36.646Z,1510295736.646 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:35:36.646Z,1510295736.646 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2017-11-10T06:35:37.032Z,1510295737.032 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:35:37.033Z,1510295737.033 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:35:37.033Z,1510295737.033 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:35:42.582Z,1510295742.582 [NAL9602](INFO): Powering up NAL9602
2017-11-10T06:35:53.782Z,1510295753.782 [NAL9602](INFO): NAL9602 initialized
2017-11-10T06:37:12.758Z,1510295832.758 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T06:32:12.6Z
2017-11-10T06:37:12.758Z,1510295832.758 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T06:37:12.758Z,1510295832.758 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T06:37:17.298Z,1510295837.298 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171110T043737/Courier0048.lzma
2017-11-10T06:37:18.097Z,1510295838.097 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0048.lzma.bak
2017-11-10T06:37:18.097Z,1510295838.097 [DataOverHttps](INFO): SBD MOMSN=5225809
2017-11-10T06:37:27.461Z,1510295847.461 [DataOverHttps](INFO): Sending 328 bytes from file Logs/20171110T043737/Express0049.lzma
2017-11-10T06:37:28.261Z,1510295848.261 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0049.lzma.bak
2017-11-10T06:37:28.262Z,1510295848.262 [DataOverHttps](INFO): SBD MOMSN=5225812
2017-11-10T06:37:29.422Z,1510295849.422 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T06:37:29.422Z,1510295849.422 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T06:37:29.422Z,1510295849.422 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T06:37:32.561Z,1510295852.561 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T06:37:50.296Z,1510295870.296 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T06:38:03.042Z,1510295883.042 [NAL9602](INFO): Powering down
2017-11-10T06:38:37.143Z,1510295917.143 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:38:37.143Z,1510295917.143 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2017-11-10T06:38:37.143Z,1510295917.143 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:38:37.156Z,1510295917.156 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:38:37.511Z,1510295917.511 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:38:37.511Z,1510295917.511 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2017-11-10T06:38:37.892Z,1510295917.892 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:38:37.893Z,1510295917.893 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:38:37.893Z,1510295917.893 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:39:39.503Z,1510295979.503 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:39:39.503Z,1510295979.503 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T06:39:39.569Z,1510295979.569 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:39:39.569Z,1510295979.569 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:39:39.569Z,1510295979.569 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:39:39.569Z,1510295979.569 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T06:39:39.569Z,1510295979.569 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:39:39.903Z,1510295979.903 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:39:39.973Z,1510295979.973 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:39:40.059Z,1510295980.059 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:39:41.501Z,1510295981.501 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:39:41.501Z,1510295981.501 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T06:39:41.673Z,1510295981.673 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:39:41.673Z,1510295981.673 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:39:41.673Z,1510295981.673 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:39:41.673Z,1510295981.673 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T06:39:41.674Z,1510295981.674 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:39:41.932Z,1510295981.932 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:39:42.077Z,1510295982.077 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:39:42.173Z,1510295982.173 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:39:43.531Z,1510295983.531 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:39:43.531Z,1510295983.531 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T06:39:43.789Z,1510295983.789 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:39:43.789Z,1510295983.789 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:39:43.789Z,1510295983.789 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:39:43.790Z,1510295983.790 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T06:39:43.790Z,1510295983.790 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:39:43.909Z,1510295983.909 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:39:44.193Z,1510295984.193 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:39:44.349Z,1510295984.349 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:39:45.908Z,1510295985.908 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:39:45.908Z,1510295985.908 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T06:39:45.965Z,1510295985.965 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:39:45.965Z,1510295985.965 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:39:45.965Z,1510295985.965 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:39:45.966Z,1510295985.966 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T06:39:45.966Z,1510295985.966 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:39:46.354Z,1510295986.354 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:39:46.369Z,1510295986.369 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:39:46.484Z,1510295986.484 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:39:47.904Z,1510295987.904 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:39:47.904Z,1510295987.904 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T06:39:48.101Z,1510295988.101 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:39:48.101Z,1510295988.101 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:39:48.101Z,1510295988.101 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:39:48.101Z,1510295988.101 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T06:39:48.102Z,1510295988.102 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:39:48.322Z,1510295988.322 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:39:48.322Z,1510295988.322 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:39:48.505Z,1510295988.505 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:39:48.598Z,1510295988.598 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:41:37.668Z,1510296097.668 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T06:41:37.668Z,1510296097.668 [BPC1] Data Fault, FailCount= 1
2017-11-10T06:41:37.668Z,1510296097.668 [BPC1](ERROR): Data Fault
2017-11-10T06:41:37.772Z,1510296097.772 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T06:41:38.143Z,1510296098.143 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:41:38.144Z,1510296098.144 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2017-11-10T06:41:38.144Z,1510296098.144 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:41:38.179Z,1510296098.179 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:41:38.554Z,1510296098.554 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:41:38.554Z,1510296098.554 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2017-11-10T06:41:38.895Z,1510296098.895 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:41:38.896Z,1510296098.896 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:41:38.896Z,1510296098.896 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:41:38.988Z,1510296098.988 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:41:38.988Z,1510296098.988 [BPC1] No Fault, FailCount= 1
2017-11-10T06:42:02.872Z,1510296122.872 [BPC1](ERROR): Failed to receive battery data
2017-11-10T06:42:02.872Z,1510296122.872 [BPC1] Communications Fault, FailCount= 2
2017-11-10T06:42:02.872Z,1510296122.872 [BPC1](ERROR): Communications Fault
2017-11-10T06:42:02.898Z,1510296122.898 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T06:42:04.095Z,1510296124.095 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:42:04.095Z,1510296124.095 [BPC1] No Fault, FailCount= 2
2017-11-10T06:42:29.685Z,1510296149.685 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T06:42:29.685Z,1510296149.685 [Default:CheckIn:C.Wait] Stopped
2017-11-10T06:42:29.685Z,1510296149.685 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T06:42:29.685Z,1510296149.685 [Default:CheckIn:D] Running Loop=1
2017-11-10T06:42:30.093Z,1510296150.093 [Default:CheckIn:D] Stopped
2017-11-10T06:42:30.093Z,1510296150.093 [Default:CheckIn:E] Running Loop=1
2017-11-10T06:42:33.182Z,1510296153.182 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 120.949552 min 
2017-11-10T06:42:33.182Z,1510296153.182 [Default:CheckIn:E] Stopped
2017-11-10T06:42:33.182Z,1510296153.182 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T06:42:33.182Z,1510296153.182 [Default:CheckIn] Stopped
2017-11-10T06:42:33.182Z,1510296153.182 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T06:42:33.183Z,1510296153.183 [Default:CheckIn](INFO): Running loop #13
2017-11-10T06:42:33.183Z,1510296153.183 [Default:CheckIn] Running Loop=13
2017-11-10T06:42:33.183Z,1510296153.183 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T06:42:33.183Z,1510296153.183 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T06:42:33.606Z,1510296153.606 [NAL9602](INFO): Powering up
2017-11-10T06:42:44.802Z,1510296164.802 [NAL9602](INFO): NAL9602 initialized
2017-11-10T06:43:16.802Z,1510296196.802 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-11-10T06:43:16.877Z,1510296196.877 [NAL9602](FAULT): received: 
+CSQ:0

OK08, 2, 0, 0, 0

OK
2017-11-10T06:43:16.877Z,1510296196.877 [NAL9602] Data Fault, FailCount= 2
2017-11-10T06:43:16.877Z,1510296196.877 [NAL9602](ERROR): Data Fault
2017-11-10T06:43:16.972Z,1510296196.972 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T06:43:17.202Z,1510296197.202 [NAL9602](INFO): Powering down
2017-11-10T06:43:18.083Z,1510296198.083 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T06:43:18.084Z,1510296198.084 [NAL9602] No Fault, FailCount= 2
2017-11-10T06:43:33.596Z,1510296213.596 [BPC1](ERROR): Failed to receive battery data
2017-11-10T06:43:33.596Z,1510296213.596 [BPC1] Communications Fault, FailCount= 1
2017-11-10T06:43:33.596Z,1510296213.596 [BPC1](ERROR): Communications Fault
2017-11-10T06:43:33.639Z,1510296213.639 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T06:43:34.514Z,1510296214.514 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:43:34.514Z,1510296214.514 [BPC1] No Fault, FailCount= 1
2017-11-10T06:43:47.258Z,1510296227.258 [NAL9602](INFO): Powering up NAL9602
2017-11-10T06:43:58.454Z,1510296238.454 [NAL9602](INFO): NAL9602 initialized
2017-11-10T06:44:39.083Z,1510296279.083 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:44:39.083Z,1510296279.083 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2017-11-10T06:44:39.083Z,1510296279.083 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:44:39.131Z,1510296279.131 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:44:39.495Z,1510296279.495 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:44:39.495Z,1510296279.495 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2017-11-10T06:44:39.875Z,1510296279.875 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:44:39.876Z,1510296279.876 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:44:39.876Z,1510296279.876 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:47:33.966Z,1510296453.966 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T06:42:33.2Z
2017-11-10T06:47:33.966Z,1510296453.966 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T06:47:33.967Z,1510296453.967 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T06:47:38.827Z,1510296458.827 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0052.lzma
2017-11-10T06:47:39.625Z,1510296459.625 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0052.lzma.bak
2017-11-10T06:47:39.626Z,1510296459.626 [DataOverHttps](INFO): SBD MOMSN=5225824
2017-11-10T06:47:40.789Z,1510296460.789 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:47:40.789Z,1510296460.789 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2017-11-10T06:47:40.789Z,1510296460.789 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:47:40.814Z,1510296460.814 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:47:40.938Z,1510296460.938 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:47:40.938Z,1510296460.938 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2017-11-10T06:47:43.996Z,1510296463.996 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:47:43.997Z,1510296463.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:47:43.997Z,1510296463.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:47:48.778Z,1510296468.778 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T06:47:48.885Z,1510296468.885 [DataOverHttps](INFO): Sending 312 bytes from file Logs/20171110T043737/Express0053.lzma
2017-11-10T06:47:49.674Z,1510296469.674 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0053.lzma.bak
2017-11-10T06:47:49.674Z,1510296469.674 [DataOverHttps](INFO): SBD MOMSN=5225826
2017-11-10T06:47:50.869Z,1510296470.869 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T06:47:50.869Z,1510296470.869 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T06:47:50.869Z,1510296470.869 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T06:47:50.879Z,1510296470.879 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T06:48:18.966Z,1510296498.966 [NAL9602](INFO): Powering down
2017-11-10T06:49:37.031Z,1510296577.031 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T06:49:37.031Z,1510296577.031 [BPC1] Data Fault, FailCount= 1
2017-11-10T06:49:37.031Z,1510296577.031 [BPC1](ERROR): Data Fault
2017-11-10T06:49:37.059Z,1510296577.059 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T06:49:38.256Z,1510296578.256 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:49:38.256Z,1510296578.256 [BPC1] No Fault, FailCount= 1
2017-11-10T06:49:48.243Z,1510296588.243 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:49:48.243Z,1510296588.243 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T06:49:48.405Z,1510296588.405 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:49:48.405Z,1510296588.405 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:49:48.405Z,1510296588.405 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:49:48.405Z,1510296588.405 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T06:49:48.406Z,1510296588.406 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:49:48.683Z,1510296588.683 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:49:48.809Z,1510296588.809 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:49:48.891Z,1510296588.891 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:49:50.247Z,1510296590.247 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:49:50.247Z,1510296590.247 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T06:49:50.506Z,1510296590.506 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:49:50.506Z,1510296590.506 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:49:50.506Z,1510296590.506 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:49:50.506Z,1510296590.506 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T06:49:50.506Z,1510296590.506 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:49:50.644Z,1510296590.644 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:49:50.909Z,1510296590.909 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:49:51.051Z,1510296591.051 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:49:54.577Z,1510296594.577 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:49:54.577Z,1510296594.577 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T06:49:54.685Z,1510296594.685 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:49:54.686Z,1510296594.686 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:49:54.686Z,1510296594.686 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:49:54.686Z,1510296594.686 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T06:49:54.686Z,1510296594.686 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:49:55.077Z,1510296595.077 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:49:55.089Z,1510296595.089 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:49:55.187Z,1510296595.187 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:49:56.642Z,1510296596.642 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:49:56.642Z,1510296596.642 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T06:49:56.801Z,1510296596.801 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:49:56.801Z,1510296596.801 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:49:56.802Z,1510296596.802 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:49:56.802Z,1510296596.802 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T06:49:56.802Z,1510296596.802 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:49:57.051Z,1510296597.051 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:49:57.205Z,1510296597.205 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:49:57.291Z,1510296597.291 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:49:58.657Z,1510296598.657 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:49:58.657Z,1510296598.657 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T06:49:58.905Z,1510296598.905 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:49:58.905Z,1510296598.905 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:49:58.905Z,1510296598.905 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:49:58.906Z,1510296598.906 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T06:49:58.906Z,1510296598.906 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:49:59.108Z,1510296599.108 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:49:59.113Z,1510296599.113 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:49:59.309Z,1510296599.309 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:49:59.451Z,1510296599.451 [Rowe_600LCM](INFO): Powering down
2017-11-10T06:50:44.241Z,1510296644.241 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:50:44.241Z,1510296644.241 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2017-11-10T06:50:44.241Z,1510296644.241 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:50:44.254Z,1510296644.254 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:50:44.651Z,1510296644.651 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:50:44.651Z,1510296644.651 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2017-11-10T06:50:45.058Z,1510296645.058 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:50:45.059Z,1510296645.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:50:45.059Z,1510296645.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:51:50.578Z,1510296710.578 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T06:51:50.578Z,1510296710.578 [BPC1] Data Fault, FailCount= 1
2017-11-10T06:51:50.578Z,1510296710.578 [BPC1](ERROR): Data Fault
2017-11-10T06:51:50.645Z,1510296710.645 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T06:51:51.828Z,1510296711.828 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T06:51:51.828Z,1510296711.828 [BPC1] No Fault, FailCount= 1
2017-11-10T06:52:51.089Z,1510296771.089 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T06:52:51.089Z,1510296771.089 [Default:CheckIn:C.Wait] Stopped
2017-11-10T06:52:51.089Z,1510296771.089 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T06:52:51.089Z,1510296771.089 [Default:CheckIn:D] Running Loop=1
2017-11-10T06:52:51.488Z,1510296771.488 [Default:CheckIn:D] Stopped
2017-11-10T06:52:51.489Z,1510296771.489 [Default:CheckIn:E] Running Loop=1
2017-11-10T06:52:51.884Z,1510296771.884 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 131.306144 min 
2017-11-10T06:52:51.884Z,1510296771.884 [Default:CheckIn:E] Stopped
2017-11-10T06:52:51.884Z,1510296771.884 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T06:52:51.885Z,1510296771.885 [Default:CheckIn] Stopped
2017-11-10T06:52:51.885Z,1510296771.885 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T06:52:51.885Z,1510296771.885 [Default:CheckIn](INFO): Running loop #14
2017-11-10T06:52:51.885Z,1510296771.885 [Default:CheckIn] Running Loop=14
2017-11-10T06:52:51.885Z,1510296771.885 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T06:52:51.885Z,1510296771.885 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T06:52:55.360Z,1510296775.360 [NAL9602](INFO): Powering up
2017-11-10T06:53:06.270Z,1510296786.270 [NAL9602](INFO): NAL9602 initialized
2017-11-10T06:53:07.066Z,1510296787.066 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T06:53:07.066Z,1510296787.066 [NAL9602] Data Fault, FailCount= 3
2017-11-10T06:53:07.066Z,1510296787.066 [NAL9602](ERROR): Data Fault
2017-11-10T06:53:07.143Z,1510296787.143 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T06:53:07.466Z,1510296787.466 [NAL9602](INFO): Powering down
2017-11-10T06:53:08.340Z,1510296788.340 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T06:53:08.340Z,1510296788.340 [NAL9602] No Fault, FailCount= 3
2017-11-10T06:53:37.866Z,1510296817.866 [NAL9602](INFO): Powering up NAL9602
2017-11-10T06:53:45.115Z,1510296825.115 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:53:45.115Z,1510296825.115 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2017-11-10T06:53:45.115Z,1510296825.115 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:53:45.128Z,1510296825.128 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:53:45.528Z,1510296825.528 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:53:45.528Z,1510296825.528 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2017-11-10T06:53:45.917Z,1510296825.917 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:53:45.918Z,1510296825.918 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:53:45.918Z,1510296825.918 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:53:49.066Z,1510296829.066 [NAL9602](INFO): NAL9602 initialized
2017-11-10T06:56:46.182Z,1510297006.182 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:56:46.183Z,1510297006.183 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2017-11-10T06:56:46.183Z,1510297006.183 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:56:46.196Z,1510297006.196 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:56:46.610Z,1510297006.610 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:56:46.610Z,1510297006.610 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2017-11-10T06:56:46.978Z,1510297006.978 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:56:46.979Z,1510297006.979 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:56:46.979Z,1510297006.979 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:57:51.010Z,1510297071.010 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T06:57:52.204Z,1510297072.204 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T06:52:51.9Z
2017-11-10T06:57:52.204Z,1510297072.204 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T06:57:52.204Z,1510297072.204 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T06:57:56.178Z,1510297076.178 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0056.lzma
2017-11-10T06:57:56.977Z,1510297076.977 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0056.lzma.bak
2017-11-10T06:57:56.978Z,1510297076.978 [DataOverHttps](INFO): SBD MOMSN=5225837
2017-11-10T06:58:06.338Z,1510297086.338 [DataOverHttps](INFO): Sending 293 bytes from file Logs/20171110T043737/Express0057.lzma
2017-11-10T06:58:07.125Z,1510297087.125 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0057.lzma.bak
2017-11-10T06:58:07.126Z,1510297087.126 [DataOverHttps](INFO): SBD MOMSN=5225839
2017-11-10T06:58:08.296Z,1510297088.296 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T06:58:08.296Z,1510297088.296 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T06:58:08.296Z,1510297088.296 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T06:58:52.438Z,1510297132.438 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T06:59:23.254Z,1510297163.254 [NAL9602](INFO): Powering down
2017-11-10T06:59:47.303Z,1510297187.303 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T06:59:47.303Z,1510297187.303 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2017-11-10T06:59:47.303Z,1510297187.303 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T06:59:47.347Z,1510297187.347 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T06:59:47.710Z,1510297187.710 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T06:59:47.710Z,1510297187.710 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2017-11-10T06:59:48.103Z,1510297188.103 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T06:59:48.103Z,1510297188.103 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T06:59:48.103Z,1510297188.103 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T06:59:58.912Z,1510297198.912 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T06:59:58.912Z,1510297198.912 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T06:59:58.921Z,1510297198.921 [Rowe_600LCM](INFO): Initializing
2017-11-10T06:59:58.921Z,1510297198.921 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T06:59:58.921Z,1510297198.921 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T06:59:58.921Z,1510297198.921 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T06:59:58.922Z,1510297198.922 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T06:59:59.320Z,1510297199.320 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T06:59:59.325Z,1510297199.325 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T06:59:59.459Z,1510297199.459 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:00:00.946Z,1510297200.946 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:00:00.946Z,1510297200.946 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T07:00:01.073Z,1510297201.073 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:00:01.073Z,1510297201.073 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:00:01.073Z,1510297201.073 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:00:01.074Z,1510297201.074 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T07:00:01.074Z,1510297201.074 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:00:01.342Z,1510297201.342 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:00:01.477Z,1510297201.477 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:00:01.564Z,1510297201.564 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:00:02.935Z,1510297202.935 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:00:02.935Z,1510297202.935 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T07:00:03.185Z,1510297203.185 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:00:03.186Z,1510297203.186 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:00:03.186Z,1510297203.186 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:00:03.186Z,1510297203.186 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T07:00:03.186Z,1510297203.186 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:00:03.352Z,1510297203.352 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:00:03.589Z,1510297203.589 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:00:03.728Z,1510297203.728 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:00:05.372Z,1510297205.372 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:00:05.372Z,1510297205.372 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T07:00:05.757Z,1510297205.757 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:00:05.758Z,1510297205.758 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:00:05.758Z,1510297205.758 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:00:05.758Z,1510297205.758 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T07:00:05.758Z,1510297205.758 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:00:06.138Z,1510297206.138 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:00:06.161Z,1510297206.161 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:00:06.253Z,1510297206.253 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:00:07.733Z,1510297207.733 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:00:07.733Z,1510297207.733 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T07:00:07.869Z,1510297207.869 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:00:07.869Z,1510297207.869 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:00:07.869Z,1510297207.869 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:00:07.869Z,1510297207.869 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T07:00:07.870Z,1510297207.870 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:00:08.147Z,1510297208.147 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:00:08.147Z,1510297208.147 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:00:08.273Z,1510297208.273 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:00:08.356Z,1510297208.356 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:02:48.206Z,1510297368.206 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:02:48.206Z,1510297368.206 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2017-11-10T07:02:48.206Z,1510297368.206 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:02:48.219Z,1510297368.219 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:02:48.623Z,1510297368.623 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:02:48.623Z,1510297368.623 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2017-11-10T07:02:49.012Z,1510297369.012 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:02:49.012Z,1510297369.012 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:02:49.013Z,1510297369.013 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:03:05.789Z,1510297385.789 [BPC1](ERROR): Failed to receive battery data
2017-11-10T07:03:05.790Z,1510297385.790 [BPC1] Communications Fault, FailCount= 1
2017-11-10T07:03:05.790Z,1510297385.790 [BPC1](ERROR): Communications Fault
2017-11-10T07:03:05.856Z,1510297385.856 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T07:03:07.019Z,1510297387.019 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:03:07.019Z,1510297387.019 [BPC1] No Fault, FailCount= 1
2017-11-10T07:03:08.609Z,1510297388.609 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T07:03:08.609Z,1510297388.609 [Default:CheckIn:C.Wait] Stopped
2017-11-10T07:03:08.609Z,1510297388.609 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T07:03:08.610Z,1510297388.610 [Default:CheckIn:D] Running Loop=1
2017-11-10T07:03:09.063Z,1510297389.063 [Default:CheckIn:D] Stopped
2017-11-10T07:03:09.063Z,1510297389.063 [Default:CheckIn:E] Running Loop=1
2017-11-10T07:03:12.127Z,1510297392.127 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 141.599072 min 
2017-11-10T07:03:12.127Z,1510297392.127 [Default:CheckIn:E] Stopped
2017-11-10T07:03:12.127Z,1510297392.127 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T07:03:12.127Z,1510297392.127 [Default:CheckIn] Stopped
2017-11-10T07:03:12.127Z,1510297392.127 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T07:03:12.127Z,1510297392.127 [Default:CheckIn](INFO): Running loop #15
2017-11-10T07:03:12.127Z,1510297392.127 [Default:CheckIn] Running Loop=15
2017-11-10T07:03:12.127Z,1510297392.127 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T07:03:12.128Z,1510297392.128 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T07:03:12.598Z,1510297392.598 [NAL9602](INFO): Powering up
2017-11-10T07:03:23.794Z,1510297403.794 [NAL9602](INFO): NAL9602 initialized
2017-11-10T07:03:55.794Z,1510297435.794 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-11-10T07:03:55.877Z,1510297435.877 [NAL9602](FAULT): received: 
+CSQ:0

OK08, 2, 0, 0, 0

OK
2017-11-10T07:03:55.877Z,1510297435.877 [NAL9602] Data Fault, FailCount= 4
2017-11-10T07:03:55.877Z,1510297435.877 [NAL9602](ERROR): Data Fault
2017-11-10T07:03:55.965Z,1510297435.965 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T07:03:56.194Z,1510297436.194 [NAL9602](INFO): Powering down
2017-11-10T07:03:57.063Z,1510297437.063 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T07:03:57.063Z,1510297437.063 [NAL9602] No Fault, FailCount= 4
2017-11-10T07:04:26.198Z,1510297466.198 [NAL9602](INFO): Powering up NAL9602
2017-11-10T07:04:37.398Z,1510297477.398 [NAL9602](INFO): NAL9602 initialized
2017-11-10T07:04:38.198Z,1510297478.198 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T07:04:38.198Z,1510297478.198 [NAL9602] Data Fault, FailCount= 5
2017-11-10T07:04:38.198Z,1510297478.198 [NAL9602](ERROR): Data Fault
2017-11-10T07:04:38.292Z,1510297478.292 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T07:04:38.293Z,1510297478.293 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-11-10T07:04:38.598Z,1510297478.598 [NAL9602](INFO): Powering down
2017-11-10T07:04:38.664Z,1510297478.664 [CBIT](INFO): Critical error at 20171110T070438
2017-11-10T07:05:49.070Z,1510297549.070 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:05:49.070Z,1510297549.070 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2017-11-10T07:05:49.070Z,1510297549.070 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:05:49.083Z,1510297549.083 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:05:49.467Z,1510297549.467 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:05:49.467Z,1510297549.467 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2017-11-10T07:05:49.838Z,1510297549.838 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:05:49.839Z,1510297549.839 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:05:49.839Z,1510297549.839 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:06:38.259Z,1510297598.259 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T07:06:38.259Z,1510297598.259 [NAL9602] No Fault, FailCount= 5
2017-11-10T07:06:38.602Z,1510297598.602 [NAL9602](INFO): Powering up NAL9602
2017-11-10T07:06:45.444Z,1510297605.444 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T07:06:45.444Z,1510297605.444 [BPC1] Data Fault, FailCount= 1
2017-11-10T07:06:45.444Z,1510297605.444 [BPC1](ERROR): Data Fault
2017-11-10T07:06:45.495Z,1510297605.495 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T07:06:46.667Z,1510297606.667 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:06:46.667Z,1510297606.667 [BPC1] No Fault, FailCount= 1
2017-11-10T07:06:49.802Z,1510297609.802 [NAL9602](INFO): NAL9602 initialized
2017-11-10T07:07:51.066Z,1510297671.066 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T07:07:51.442Z,1510297671.442 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T07:07:51.442Z,1510297671.442 [BPC1] Data Fault, FailCount= 1
2017-11-10T07:07:51.442Z,1510297671.442 [BPC1](ERROR): Data Fault
2017-11-10T07:07:51.467Z,1510297671.467 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T07:07:52.672Z,1510297672.672 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:07:52.672Z,1510297672.672 [BPC1] No Fault, FailCount= 1
2017-11-10T07:08:12.613Z,1510297692.613 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T07:03:12.1Z
2017-11-10T07:08:12.614Z,1510297692.614 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T07:08:12.614Z,1510297692.614 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T07:08:17.822Z,1510297697.822 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20171110T043737/Courier0060.lzma
2017-11-10T07:08:18.617Z,1510297698.617 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0060.lzma.bak
2017-11-10T07:08:18.618Z,1510297698.618 [DataOverHttps](INFO): SBD MOMSN=5225850
2017-11-10T07:08:27.677Z,1510297707.677 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T07:08:27.787Z,1510297707.787 [DataOverHttps](INFO): Sending 328 bytes from file Logs/20171110T043737/Express0061.lzma
2017-11-10T07:08:28.585Z,1510297708.585 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0061.lzma.bak
2017-11-10T07:08:28.586Z,1510297708.586 [DataOverHttps](INFO): SBD MOMSN=5225853
2017-11-10T07:08:29.878Z,1510297709.878 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T07:08:29.878Z,1510297709.878 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T07:08:29.878Z,1510297709.878 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T07:08:49.994Z,1510297729.994 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:08:49.994Z,1510297729.994 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2017-11-10T07:08:49.994Z,1510297729.994 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:08:50.007Z,1510297730.007 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:08:50.366Z,1510297730.366 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:08:50.366Z,1510297730.366 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2017-11-10T07:08:50.765Z,1510297730.765 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:08:50.765Z,1510297730.765 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:08:50.765Z,1510297730.765 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:08:57.910Z,1510297737.910 [NAL9602](INFO): Powering down
2017-11-10T07:10:07.923Z,1510297807.923 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:10:07.923Z,1510297807.923 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T07:10:08.221Z,1510297808.221 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:10:08.221Z,1510297808.221 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:10:08.221Z,1510297808.221 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:10:08.221Z,1510297808.221 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T07:10:08.222Z,1510297808.222 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:10:08.340Z,1510297808.340 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:10:08.625Z,1510297808.625 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:10:08.822Z,1510297808.822 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:10:10.331Z,1510297810.331 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:10:10.332Z,1510297810.332 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T07:10:10.437Z,1510297810.437 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:10:10.437Z,1510297810.437 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:10:10.438Z,1510297810.438 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:10:10.438Z,1510297810.438 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T07:10:10.438Z,1510297810.438 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:10:10.765Z,1510297810.765 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:10:10.841Z,1510297810.841 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:10:10.980Z,1510297810.980 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:10:12.328Z,1510297812.328 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:10:12.328Z,1510297812.328 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T07:10:12.597Z,1510297812.597 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:10:12.597Z,1510297812.597 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:10:12.597Z,1510297812.597 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:10:12.598Z,1510297812.598 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T07:10:12.598Z,1510297812.598 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:10:12.724Z,1510297812.724 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:10:13.001Z,1510297813.001 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:10:13.175Z,1510297813.175 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:10:14.729Z,1510297814.729 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:10:14.729Z,1510297814.729 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T07:10:14.789Z,1510297814.789 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:10:14.789Z,1510297814.789 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:10:14.789Z,1510297814.789 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:10:14.790Z,1510297814.790 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T07:10:14.790Z,1510297814.790 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:10:15.169Z,1510297815.169 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:10:15.193Z,1510297815.193 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:10:15.278Z,1510297815.278 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:10:16.735Z,1510297816.735 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:10:16.735Z,1510297816.735 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T07:10:16.893Z,1510297816.893 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:10:16.893Z,1510297816.893 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:10:16.893Z,1510297816.893 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:10:16.894Z,1510297816.894 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T07:10:16.894Z,1510297816.894 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:10:17.129Z,1510297817.129 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:10:17.130Z,1510297817.130 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:10:17.297Z,1510297817.297 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:10:17.380Z,1510297817.380 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:11:38.787Z,1510297898.787 [BPC1](ERROR): Failed to parse message.
2017-11-10T07:11:38.788Z,1510297898.788 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T07:11:38.788Z,1510297898.788 [BPC1] Data Fault, FailCount= 1
2017-11-10T07:11:38.788Z,1510297898.788 [BPC1](ERROR): Data Fault
2017-11-10T07:11:38.813Z,1510297898.813 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T07:11:40.015Z,1510297900.015 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:11:40.015Z,1510297900.015 [BPC1] No Fault, FailCount= 1
2017-11-10T07:11:50.807Z,1510297910.807 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:11:50.807Z,1510297910.807 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2017-11-10T07:11:50.807Z,1510297910.807 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:11:50.820Z,1510297910.820 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:11:51.218Z,1510297911.218 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:11:51.218Z,1510297911.218 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2017-11-10T07:11:51.600Z,1510297911.600 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:11:51.601Z,1510297911.601 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:11:51.601Z,1510297911.601 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:12:49.389Z,1510297969.389 [BPC1](ERROR): Failed to receive battery data
2017-11-10T07:12:49.389Z,1510297969.389 [BPC1] Communications Fault, FailCount= 1
2017-11-10T07:12:49.389Z,1510297969.389 [BPC1](ERROR): Communications Fault
2017-11-10T07:12:49.422Z,1510297969.422 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T07:12:50.616Z,1510297970.616 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:12:50.616Z,1510297970.616 [BPC1] No Fault, FailCount= 1
2017-11-10T07:13:30.211Z,1510298010.211 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T07:13:30.211Z,1510298010.211 [Default:CheckIn:C.Wait] Stopped
2017-11-10T07:13:30.211Z,1510298010.211 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T07:13:30.211Z,1510298010.211 [Default:CheckIn:D] Running Loop=1
2017-11-10T07:13:30.639Z,1510298010.639 [Default:CheckIn:D] Stopped
2017-11-10T07:13:30.639Z,1510298010.639 [Default:CheckIn:E] Running Loop=1
2017-11-10T07:13:31.040Z,1510298011.040 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 151.958659 min 
2017-11-10T07:13:31.041Z,1510298011.041 [Default:CheckIn:E] Stopped
2017-11-10T07:13:31.041Z,1510298011.041 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T07:13:31.041Z,1510298011.041 [Default:CheckIn] Stopped
2017-11-10T07:13:31.041Z,1510298011.041 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T07:13:31.041Z,1510298011.041 [Default:CheckIn](INFO): Running loop #16
2017-11-10T07:13:31.041Z,1510298011.041 [Default:CheckIn] Running Loop=16
2017-11-10T07:13:31.041Z,1510298011.041 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T07:13:31.041Z,1510298011.041 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T07:13:34.202Z,1510298014.202 [NAL9602](INFO): Powering up
2017-11-10T07:13:45.350Z,1510298025.350 [NAL9602](INFO): NAL9602 initialized
2017-11-10T07:14:17.350Z,1510298057.350 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-11-10T07:14:17.425Z,1510298057.425 [NAL9602](FAULT): received: 
+CSQ:0

OK08, 2, 0, 0, 0

OK
2017-11-10T07:14:17.425Z,1510298057.425 [NAL9602] Data Fault, FailCount= 1
2017-11-10T07:14:17.425Z,1510298057.425 [NAL9602](ERROR): Data Fault
2017-11-10T07:14:17.548Z,1510298057.548 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T07:14:17.754Z,1510298057.754 [NAL9602](INFO): Powering down
2017-11-10T07:14:18.617Z,1510298058.617 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T07:14:18.617Z,1510298058.617 [NAL9602] No Fault, FailCount= 1
2017-11-10T07:14:36.141Z,1510298076.141 [PNI_TCM](ERROR): CRC does not match. Expected:0x64802 got:0x21749
2017-11-10T07:14:37.744Z,1510298077.744 [PNI_TCM](ERROR): CRC does not match. Expected:0x61020 got:0x49670
2017-11-10T07:14:48.114Z,1510298088.114 [NAL9602](INFO): Powering up NAL9602
2017-11-10T07:14:51.763Z,1510298091.763 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:14:51.763Z,1510298091.763 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2017-11-10T07:14:51.763Z,1510298091.763 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:14:51.776Z,1510298091.776 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:14:52.171Z,1510298092.171 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:14:52.171Z,1510298092.171 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2017-11-10T07:14:52.561Z,1510298092.561 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:14:52.561Z,1510298092.561 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:14:52.562Z,1510298092.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:14:58.539Z,1510298098.539 [PNI_TCM](ERROR): CRC does not match. Expected:0x8908 got:0x44752
2017-11-10T07:14:59.323Z,1510298099.323 [NAL9602](INFO): NAL9602 initialized
2017-11-10T07:15:00.150Z,1510298100.150 [PNI_TCM](ERROR): CRC does not match. Expected:0x28067 got:0x6336
2017-11-10T07:15:01.747Z,1510298101.747 [PNI_TCM](ERROR): CRC does not match. Expected:0x58867 got:0x49162
2017-11-10T07:15:03.346Z,1510298103.346 [PNI_TCM](ERROR): CRC does not match. Expected:0x6611 got:0x49162
2017-11-10T07:15:04.942Z,1510298104.942 [PNI_TCM](ERROR): CRC does not match. Expected:0x52894 got:0x40383
2017-11-10T07:15:20.940Z,1510298120.940 [PNI_TCM](ERROR): CRC does not match. Expected:0x14360 got:0x37968
2017-11-10T07:15:22.541Z,1510298122.541 [PNI_TCM](ERROR): CRC does not match. Expected:0x39486 got:0x32847
2017-11-10T07:15:30.537Z,1510298130.537 [PNI_TCM](ERROR): CRC does not match. Expected:0x8762 got:0x49326
2017-11-10T07:15:34.889Z,1510298134.889 [PNI_TCM](ERROR): CRC does not match. Expected:0x37506 got:0x0
2017-11-10T07:15:34.890Z,1510298134.890 [PNI_TCM](ERROR): CRC does not match. Expected:0x55634 got:0x16384
2017-11-10T07:15:34.890Z,1510298134.890 [PNI_TCM](ERROR): CRC does not match. Expected:0x34365 got:0x32768
2017-11-10T07:15:34.890Z,1510298134.890 [PNI_TCM](ERROR): CRC does not match. Expected:0x34005 got:0x32768
2017-11-10T07:15:34.891Z,1510298134.891 [PNI_TCM](ERROR): CRC does not match. Expected:0x10636 got:0x0
2017-11-10T07:15:34.891Z,1510298134.891 [PNI_TCM](ERROR): CRC does not match. Expected:0x62062 got:0x32768
2017-11-10T07:15:34.891Z,1510298134.891 [PNI_TCM](ERROR): CRC does not match. Expected:0x25734 got:0x0
2017-11-10T07:17:51.104Z,1510298271.104 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T07:17:52.703Z,1510298272.703 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:17:52.704Z,1510298272.704 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2017-11-10T07:17:52.704Z,1510298272.704 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:17:52.737Z,1510298272.737 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:17:53.115Z,1510298273.115 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:17:53.115Z,1510298273.115 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2017-11-10T07:17:53.499Z,1510298273.499 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:17:53.499Z,1510298273.499 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:17:53.500Z,1510298273.500 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:18:25.489Z,1510298305.489 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T07:18:25.489Z,1510298305.489 [BPC1] Data Fault, FailCount= 1
2017-11-10T07:18:25.489Z,1510298305.489 [BPC1](ERROR): Data Fault
2017-11-10T07:18:25.536Z,1510298305.536 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T07:18:26.724Z,1510298306.724 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:18:26.724Z,1510298306.724 [BPC1] No Fault, FailCount= 1
2017-11-10T07:18:31.101Z,1510298311.101 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T07:13:31.0Z
2017-11-10T07:18:31.101Z,1510298311.101 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T07:18:31.101Z,1510298311.101 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T07:18:31.456Z,1510298311.456 [NAL9602](INFO): SBD MO Status=2, MOMSN=2608, MT Status=2, MTMSN=0
2017-11-10T07:18:31.456Z,1510298311.456 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-11-10T07:18:35.502Z,1510298315.502 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0064.lzma
2017-11-10T07:18:36.301Z,1510298316.301 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0064.lzma.bak
2017-11-10T07:18:36.302Z,1510298316.302 [DataOverHttps](INFO): SBD MOMSN=5225865
2017-11-10T07:18:45.750Z,1510298325.750 [DataOverHttps](INFO): Sending 312 bytes from file Logs/20171110T043737/Express0065.lzma
2017-11-10T07:18:46.533Z,1510298326.533 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0065.lzma.bak
2017-11-10T07:18:46.534Z,1510298326.534 [DataOverHttps](INFO): SBD MOMSN=5225867
2017-11-10T07:18:47.749Z,1510298327.749 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T07:18:47.749Z,1510298327.749 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T07:18:47.749Z,1510298327.749 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T07:18:50.865Z,1510298330.865 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T07:19:21.398Z,1510298361.398 [NAL9602](INFO): Powering down
2017-11-10T07:20:17.109Z,1510298417.109 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:20:17.110Z,1510298417.110 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T07:20:17.257Z,1510298417.257 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:20:17.257Z,1510298417.257 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:20:17.257Z,1510298417.257 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:20:17.257Z,1510298417.257 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T07:20:17.257Z,1510298417.257 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:20:17.511Z,1510298417.511 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:20:17.661Z,1510298417.661 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:20:17.756Z,1510298417.756 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:20:19.160Z,1510298419.160 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:20:19.160Z,1510298419.160 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T07:20:19.373Z,1510298419.373 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:20:19.374Z,1510298419.374 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:20:19.374Z,1510298419.374 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:20:19.374Z,1510298419.374 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T07:20:19.374Z,1510298419.374 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:20:19.512Z,1510298419.512 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:20:19.777Z,1510298419.777 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:20:19.911Z,1510298419.911 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:20:21.168Z,1510298421.168 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:20:21.168Z,1510298421.168 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T07:20:21.525Z,1510298421.525 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:20:21.525Z,1510298421.525 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:20:21.526Z,1510298421.526 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:20:21.526Z,1510298421.526 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T07:20:21.526Z,1510298421.526 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:20:21.922Z,1510298421.922 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:20:21.929Z,1510298421.929 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:20:22.060Z,1510298422.060 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:20:23.504Z,1510298423.504 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:20:23.504Z,1510298423.504 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T07:20:23.673Z,1510298423.673 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:20:23.673Z,1510298423.673 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:20:23.673Z,1510298423.673 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:20:23.673Z,1510298423.673 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T07:20:23.673Z,1510298423.673 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:20:23.905Z,1510298423.905 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:20:24.077Z,1510298424.077 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:20:24.167Z,1510298424.167 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:20:25.526Z,1510298425.526 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:20:25.526Z,1510298425.526 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T07:20:25.781Z,1510298425.781 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:20:25.781Z,1510298425.781 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:20:25.781Z,1510298425.781 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:20:25.782Z,1510298425.782 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T07:20:25.782Z,1510298425.782 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:20:25.908Z,1510298425.908 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:20:25.908Z,1510298425.908 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:20:26.185Z,1510298426.185 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:20:26.364Z,1510298426.364 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:20:53.551Z,1510298453.551 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:20:53.551Z,1510298453.551 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2017-11-10T07:20:53.551Z,1510298453.551 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:20:53.612Z,1510298453.612 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:20:53.954Z,1510298453.954 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:20:53.954Z,1510298453.954 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2017-11-10T07:20:54.357Z,1510298454.357 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:20:54.358Z,1510298454.358 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:20:54.358Z,1510298454.358 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:22:37.904Z,1510298557.904 [BPC1](ERROR): Failed to receive battery data
2017-11-10T07:22:37.904Z,1510298557.904 [BPC1] Communications Fault, FailCount= 1
2017-11-10T07:22:37.904Z,1510298557.904 [BPC1](ERROR): Communications Fault
2017-11-10T07:22:37.979Z,1510298557.979 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T07:22:39.131Z,1510298559.131 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:22:39.131Z,1510298559.131 [BPC1] No Fault, FailCount= 1
2017-11-10T07:23:48.273Z,1510298628.273 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T07:23:48.273Z,1510298628.273 [Default:CheckIn:C.Wait] Stopped
2017-11-10T07:23:48.273Z,1510298628.273 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T07:23:48.274Z,1510298628.274 [Default:CheckIn:D] Running Loop=1
2017-11-10T07:23:48.677Z,1510298628.677 [Default:CheckIn:D] Stopped
2017-11-10T07:23:48.677Z,1510298628.677 [Default:CheckIn:E] Running Loop=1
2017-11-10T07:23:49.077Z,1510298629.077 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 162.259294 min 
2017-11-10T07:23:49.077Z,1510298629.077 [Default:CheckIn:E] Stopped
2017-11-10T07:23:49.077Z,1510298629.077 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T07:23:49.078Z,1510298629.078 [Default:CheckIn] Stopped
2017-11-10T07:23:49.078Z,1510298629.078 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T07:23:49.078Z,1510298629.078 [Default:CheckIn](INFO): Running loop #17
2017-11-10T07:23:49.078Z,1510298629.078 [Default:CheckIn] Running Loop=17
2017-11-10T07:23:49.078Z,1510298629.078 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T07:23:49.078Z,1510298629.078 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T07:23:52.282Z,1510298632.282 [NAL9602](INFO): Powering up
2017-11-10T07:23:54.683Z,1510298634.683 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:23:54.683Z,1510298634.683 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2017-11-10T07:23:54.683Z,1510298634.683 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:23:54.696Z,1510298634.696 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:23:55.097Z,1510298635.097 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:23:55.097Z,1510298635.097 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2017-11-10T07:23:55.483Z,1510298635.483 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:23:55.484Z,1510298635.484 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:23:55.484Z,1510298635.484 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:24:03.434Z,1510298643.434 [NAL9602](INFO): NAL9602 initialized
2017-11-10T07:24:04.234Z,1510298644.234 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T07:24:04.234Z,1510298644.234 [NAL9602] Data Fault, FailCount= 2
2017-11-10T07:24:04.234Z,1510298644.234 [NAL9602](ERROR): Data Fault
2017-11-10T07:24:04.367Z,1510298644.367 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T07:24:04.634Z,1510298644.634 [NAL9602](INFO): Powering down
2017-11-10T07:24:05.526Z,1510298645.526 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T07:24:05.527Z,1510298645.527 [NAL9602] No Fault, FailCount= 2
2017-11-10T07:24:35.041Z,1510298675.041 [NAL9602](INFO): Powering up NAL9602
2017-11-10T07:24:46.234Z,1510298686.234 [NAL9602](INFO): NAL9602 initialized
2017-11-10T07:26:55.510Z,1510298815.510 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:26:55.510Z,1510298815.510 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2017-11-10T07:26:55.510Z,1510298815.510 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:26:55.523Z,1510298815.523 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:26:55.937Z,1510298815.937 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:26:55.937Z,1510298815.937 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2017-11-10T07:26:56.321Z,1510298816.321 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:26:56.322Z,1510298816.322 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:26:56.322Z,1510298816.322 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:27:21.467Z,1510298841.467 [NAL9602](INFO): SBD MO Status=2, MOMSN=2608, MT Status=2, MTMSN=0
2017-11-10T07:27:21.468Z,1510298841.468 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-11-10T07:27:39.467Z,1510298859.467 [NAL9602](INFO): SBD MO Status=0, MOMSN=2608, MT Status=0, MTMSN=0
2017-11-10T07:27:39.467Z,1510298859.467 [NAL9602](INFO): No messages in MT queue
2017-11-10T07:27:51.124Z,1510298871.124 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T07:28:18.278Z,1510298898.278 [NAL9602](INFO): GPS fix at 20171110T072733: (36.802663, -121.788265)
2017-11-10T07:28:18.347Z,1510298898.347 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T07:28:18.347Z,1510298898.347 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T07:28:22.874Z,1510298902.874 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20171110T043737/Courier0068.lzma
2017-11-10T07:28:23.665Z,1510298903.665 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0068.lzma.bak
2017-11-10T07:28:23.666Z,1510298903.666 [DataOverHttps](INFO): SBD MOMSN=5225878
2017-11-10T07:28:32.847Z,1510298912.847 [DataOverHttps](INFO): Sending 302 bytes from file Logs/20171110T043737/Express0069.lzma
2017-11-10T07:28:33.645Z,1510298913.645 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0069.lzma.bak
2017-11-10T07:28:33.646Z,1510298913.646 [DataOverHttps](INFO): SBD MOMSN=5225881
2017-11-10T07:28:34.825Z,1510298914.825 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T07:28:34.826Z,1510298914.826 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T07:28:34.826Z,1510298914.826 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T07:28:53.070Z,1510298933.070 [NAL9602](INFO): Powering down
2017-11-10T07:29:56.686Z,1510298996.686 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:29:56.686Z,1510298996.686 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-11-10T07:29:56.686Z,1510298996.686 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:29:56.700Z,1510298996.700 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:29:57.104Z,1510298997.104 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:29:57.104Z,1510298997.104 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-11-10T07:29:57.491Z,1510298997.491 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:29:57.492Z,1510298997.492 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:29:57.492Z,1510298997.492 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:30:25.921Z,1510299025.921 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:30:25.921Z,1510299025.921 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T07:30:26.257Z,1510299026.257 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:30:26.258Z,1510299026.258 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:30:26.258Z,1510299026.258 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:30:26.258Z,1510299026.258 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T07:30:26.258Z,1510299026.258 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:30:26.323Z,1510299026.323 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:30:26.661Z,1510299026.661 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:30:26.839Z,1510299026.839 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:30:28.310Z,1510299028.310 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:30:28.310Z,1510299028.310 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T07:30:28.453Z,1510299028.453 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:30:28.453Z,1510299028.453 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:30:28.453Z,1510299028.453 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:30:28.453Z,1510299028.453 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T07:30:28.454Z,1510299028.454 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:30:28.755Z,1510299028.755 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:30:28.857Z,1510299028.857 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:30:28.948Z,1510299028.948 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:30:30.324Z,1510299030.324 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:30:30.329Z,1510299030.329 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T07:30:30.565Z,1510299030.565 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:30:30.565Z,1510299030.565 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:30:30.566Z,1510299030.566 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:30:30.566Z,1510299030.566 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T07:30:30.566Z,1510299030.566 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:30:30.715Z,1510299030.715 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:30:30.969Z,1510299030.969 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:30:31.115Z,1510299031.115 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:30:31.866Z,1510299031.866 [BPC1](ERROR): Failed to receive battery data
2017-11-10T07:30:31.866Z,1510299031.866 [BPC1] Communications Fault, FailCount= 1
2017-11-10T07:30:31.866Z,1510299031.866 [BPC1](ERROR): Communications Fault
2017-11-10T07:30:31.930Z,1510299031.930 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T07:30:32.693Z,1510299032.693 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:30:32.693Z,1510299032.693 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T07:30:32.729Z,1510299032.729 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:30:32.729Z,1510299032.729 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:30:32.730Z,1510299032.730 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:30:32.730Z,1510299032.730 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T07:30:32.730Z,1510299032.730 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:30:33.122Z,1510299033.122 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:30:33.122Z,1510299033.122 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:30:33.122Z,1510299033.122 [BPC1] No Fault, FailCount= 1
2017-11-10T07:30:33.133Z,1510299033.133 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:30:33.243Z,1510299033.243 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:30:34.696Z,1510299034.696 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:30:34.696Z,1510299034.696 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T07:30:34.857Z,1510299034.857 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:30:34.857Z,1510299034.857 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:30:34.857Z,1510299034.857 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:30:34.858Z,1510299034.858 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T07:30:34.858Z,1510299034.858 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:30:35.100Z,1510299035.100 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:30:35.100Z,1510299035.100 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:30:35.262Z,1510299035.262 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:30:35.348Z,1510299035.348 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:31:13.445Z,1510299073.445 [BPC1](ERROR): Failed to parse message.
2017-11-10T07:31:13.445Z,1510299073.445 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T07:31:13.445Z,1510299073.445 [BPC1] Data Fault, FailCount= 1
2017-11-10T07:31:13.445Z,1510299073.445 [BPC1](ERROR): Data Fault
2017-11-10T07:31:13.503Z,1510299073.503 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T07:31:14.672Z,1510299074.672 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:31:14.672Z,1510299074.672 [BPC1] No Fault, FailCount= 1
2017-11-10T07:32:57.530Z,1510299177.530 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:32:57.531Z,1510299177.531 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-11-10T07:32:57.531Z,1510299177.531 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:32:57.544Z,1510299177.544 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:32:57.944Z,1510299177.944 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:32:57.944Z,1510299177.944 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-11-10T07:32:58.332Z,1510299178.332 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:32:58.333Z,1510299178.333 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:32:58.333Z,1510299178.333 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:33:35.121Z,1510299215.121 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T07:33:35.121Z,1510299215.121 [Default:CheckIn:C.Wait] Stopped
2017-11-10T07:33:35.122Z,1510299215.122 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T07:33:35.122Z,1510299215.122 [Default:CheckIn:D] Running Loop=1
2017-11-10T07:33:35.522Z,1510299215.522 [Default:CheckIn:D] Stopped
2017-11-10T07:33:35.522Z,1510299215.522 [Default:CheckIn:E] Running Loop=1
2017-11-10T07:33:35.927Z,1510299215.927 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 172.040039 min 
2017-11-10T07:33:35.927Z,1510299215.927 [Default:CheckIn:E] Stopped
2017-11-10T07:33:35.927Z,1510299215.927 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T07:33:35.927Z,1510299215.927 [Default:CheckIn] Stopped
2017-11-10T07:33:35.927Z,1510299215.927 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T07:33:35.927Z,1510299215.927 [Default:CheckIn](INFO): Running loop #18
2017-11-10T07:33:35.928Z,1510299215.928 [Default:CheckIn] Running Loop=18
2017-11-10T07:33:35.928Z,1510299215.928 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T07:33:35.928Z,1510299215.928 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T07:33:39.375Z,1510299219.375 [NAL9602](INFO): Powering up
2017-11-10T07:33:50.282Z,1510299230.282 [NAL9602](INFO): NAL9602 initialized
2017-11-10T07:35:58.395Z,1510299358.395 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:35:58.395Z,1510299358.395 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-11-10T07:35:58.395Z,1510299358.395 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:35:58.408Z,1510299358.408 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:35:58.809Z,1510299358.809 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:35:58.809Z,1510299358.809 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-11-10T07:35:59.196Z,1510299359.196 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:35:59.196Z,1510299359.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:35:59.196Z,1510299359.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:37:51.284Z,1510299471.284 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T07:38:36.057Z,1510299516.057 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T07:33:35.9Z
2017-11-10T07:38:36.057Z,1510299516.057 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T07:38:36.057Z,1510299516.057 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T07:38:40.121Z,1510299520.121 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0072.lzma
2017-11-10T07:38:40.901Z,1510299520.901 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0072.lzma.bak
2017-11-10T07:38:40.902Z,1510299520.902 [DataOverHttps](INFO): SBD MOMSN=5225893
2017-11-10T07:38:50.422Z,1510299530.422 [DataOverHttps](INFO): Sending 203 bytes from file Logs/20171110T043737/Express0073.lzma
2017-11-10T07:38:51.221Z,1510299531.221 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0073.lzma.bak
2017-11-10T07:38:51.222Z,1510299531.222 [DataOverHttps](INFO): SBD MOMSN=5225895
2017-11-10T07:38:52.382Z,1510299532.382 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T07:38:52.382Z,1510299532.382 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T07:38:52.382Z,1510299532.382 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T07:38:55.546Z,1510299535.546 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T07:38:59.288Z,1510299539.288 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:38:59.288Z,1510299539.288 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-11-10T07:38:59.288Z,1510299539.288 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:38:59.304Z,1510299539.304 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:38:59.706Z,1510299539.706 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:38:59.706Z,1510299539.706 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-11-10T07:39:00.094Z,1510299540.094 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:39:00.095Z,1510299540.095 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:39:00.095Z,1510299540.095 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:39:26.046Z,1510299566.046 [NAL9602](INFO): Powering down
2017-11-10T07:40:04.131Z,1510299604.131 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-10T07:40:05.729Z,1510299605.729 [PNI_TCM](ERROR): CRC does not match. Expected:0x65405 got:0x41727
2017-11-10T07:40:08.936Z,1510299608.936 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-11-10T07:40:13.723Z,1510299613.723 [PNI_TCM](ERROR): CRC does not match. Expected:0x52907 got:0x42008
2017-11-10T07:40:14.122Z,1510299614.122 [PNI_TCM](ERROR): CRC does not match. Expected:0x35670 got:0x230
2017-11-10T07:40:16.933Z,1510299616.933 [PNI_TCM](ERROR): CRC does not match. Expected:0x63742 got:0x26137
2017-11-10T07:40:18.529Z,1510299618.529 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-11-10T07:40:33.333Z,1510299633.333 [PNI_TCM](ERROR): CRC does not match. Expected:0x54144 got:0x1857
2017-11-10T07:40:34.959Z,1510299634.959 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:40:34.959Z,1510299634.959 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T07:40:35.133Z,1510299635.133 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:40:35.133Z,1510299635.133 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:40:35.133Z,1510299635.133 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:40:35.133Z,1510299635.133 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T07:40:35.133Z,1510299635.133 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:40:35.363Z,1510299635.363 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:40:35.537Z,1510299635.537 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:40:35.621Z,1510299635.621 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:40:36.534Z,1510299636.534 [PNI_TCM](ERROR): CRC does not match. Expected:0x54409 got:0x1857
2017-11-10T07:40:36.962Z,1510299636.962 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:40:36.962Z,1510299636.962 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T07:40:37.237Z,1510299637.237 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:40:37.237Z,1510299637.237 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:40:37.237Z,1510299637.237 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:40:37.238Z,1510299637.238 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T07:40:37.238Z,1510299637.238 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:40:37.357Z,1510299637.357 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:40:37.641Z,1510299637.641 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:40:37.852Z,1510299637.852 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:40:39.334Z,1510299639.334 [PNI_TCM](ERROR): CRC does not match. Expected:0x45934 got:0x50971
2017-11-10T07:40:39.410Z,1510299639.410 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:40:39.410Z,1510299639.410 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T07:40:39.465Z,1510299639.465 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:40:39.465Z,1510299639.465 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:40:39.465Z,1510299639.465 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:40:39.465Z,1510299639.465 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T07:40:39.466Z,1510299639.466 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:40:39.762Z,1510299639.762 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:40:39.869Z,1510299639.869 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:40:39.953Z,1510299639.953 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:40:41.369Z,1510299641.369 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:40:41.369Z,1510299641.369 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T07:40:41.569Z,1510299641.569 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:40:41.569Z,1510299641.569 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:40:41.569Z,1510299641.569 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:40:41.570Z,1510299641.569 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T07:40:41.570Z,1510299641.570 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:40:41.772Z,1510299641.772 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:40:41.973Z,1510299641.973 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:40:42.060Z,1510299642.060 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:40:42.523Z,1510299642.523 [PNI_TCM](ERROR): CRC does not match. Expected:0x2207 got:0x32962
2017-11-10T07:40:43.389Z,1510299643.389 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:40:43.389Z,1510299643.389 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T07:40:43.677Z,1510299643.677 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:40:43.677Z,1510299643.677 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:40:43.677Z,1510299643.677 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:40:43.678Z,1510299643.678 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T07:40:43.678Z,1510299643.678 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:40:43.791Z,1510299643.791 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:40:43.791Z,1510299643.791 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:40:44.081Z,1510299644.081 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:40:44.324Z,1510299644.324 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:40:45.729Z,1510299645.729 [PNI_TCM](ERROR): CRC does not match. Expected:0x35979 got:0x5404
2017-11-10T07:40:47.327Z,1510299647.327 [PNI_TCM](ERROR): CRC does not match. Expected:0x3999 got:0x64795
2017-11-10T07:40:48.932Z,1510299648.932 [PNI_TCM](ERROR): CRC does not match. Expected:0x18765 got:0x6977
2017-11-10T07:40:50.532Z,1510299650.532 [PNI_TCM](ERROR): CRC does not match. Expected:0x51452 got:0x49326
2017-11-10T07:40:52.132Z,1510299652.132 [PNI_TCM](ERROR): CRC does not match. Expected:0x65169 got:0x61702
2017-11-10T07:42:00.314Z,1510299720.314 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:42:00.314Z,1510299720.314 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-11-10T07:42:00.314Z,1510299720.314 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:42:00.327Z,1510299720.327 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:42:00.726Z,1510299720.726 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:42:00.726Z,1510299720.726 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-11-10T07:42:01.119Z,1510299721.119 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:42:01.119Z,1510299721.119 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:42:01.120Z,1510299721.120 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:43:20.718Z,1510299800.718 [BPC1](ERROR): Failed to parse message.
2017-11-10T07:43:20.718Z,1510299800.718 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T07:43:20.718Z,1510299800.718 [BPC1] Data Fault, FailCount= 1
2017-11-10T07:43:20.718Z,1510299800.718 [BPC1](ERROR): Data Fault
2017-11-10T07:43:20.748Z,1510299800.748 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T07:43:21.945Z,1510299801.945 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:43:21.946Z,1510299801.946 [BPC1] No Fault, FailCount= 1
2017-11-10T07:43:52.728Z,1510299832.728 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T07:43:52.729Z,1510299832.729 [Default:CheckIn:C.Wait] Stopped
2017-11-10T07:43:52.729Z,1510299832.729 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T07:43:52.729Z,1510299832.729 [Default:CheckIn:D] Running Loop=1
2017-11-10T07:43:53.173Z,1510299833.173 [Default:CheckIn:D] Stopped
2017-11-10T07:43:53.173Z,1510299833.173 [Default:CheckIn:E] Running Loop=1
2017-11-10T07:43:53.541Z,1510299833.541 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 182.334212 min 
2017-11-10T07:43:53.541Z,1510299833.541 [Default:CheckIn:E] Stopped
2017-11-10T07:43:53.541Z,1510299833.541 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T07:43:53.541Z,1510299833.541 [Default:CheckIn] Stopped
2017-11-10T07:43:53.542Z,1510299833.542 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T07:43:53.542Z,1510299833.542 [Default:CheckIn](INFO): Running loop #19
2017-11-10T07:43:53.542Z,1510299833.542 [Default:CheckIn] Running Loop=19
2017-11-10T07:43:53.542Z,1510299833.542 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T07:43:53.542Z,1510299833.542 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T07:43:56.770Z,1510299836.770 [NAL9602](INFO): Powering up
2017-11-10T07:44:07.934Z,1510299847.934 [NAL9602](INFO): NAL9602 initialized
2017-11-10T07:44:08.734Z,1510299848.734 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T07:44:08.734Z,1510299848.734 [NAL9602] Data Fault, FailCount= 1
2017-11-10T07:44:08.734Z,1510299848.734 [NAL9602](ERROR): Data Fault
2017-11-10T07:44:08.799Z,1510299848.799 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T07:44:09.138Z,1510299849.138 [NAL9602](INFO): Powering down
2017-11-10T07:44:09.988Z,1510299849.988 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T07:44:09.988Z,1510299849.988 [NAL9602] No Fault, FailCount= 1
2017-11-10T07:44:39.534Z,1510299879.534 [NAL9602](INFO): Powering up NAL9602
2017-11-10T07:44:50.334Z,1510299890.334 [NAL9602](INFO): NAL9602 initialized
2017-11-10T07:45:01.366Z,1510299901.366 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:45:01.366Z,1510299901.366 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-11-10T07:45:01.366Z,1510299901.366 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:45:01.379Z,1510299901.379 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:45:01.784Z,1510299901.784 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:45:01.784Z,1510299901.784 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-11-10T07:45:02.162Z,1510299902.162 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:45:02.163Z,1510299902.163 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:45:02.163Z,1510299902.163 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:45:03.334Z,1510299903.334 [PNI_TCM](ERROR): CRC does not match. Expected:0x51664 got:0x16799
2017-11-10T07:45:04.930Z,1510299904.930 [PNI_TCM](ERROR): CRC does not match. Expected:0x9126 got:0x34333
2017-11-10T07:45:12.507Z,1510299912.507 [NAL9602](INFO): SBD MO Status=0, MOMSN=2609, MT Status=0, MTMSN=0
2017-11-10T07:45:12.508Z,1510299912.508 [NAL9602](INFO): No messages in MT queue
2017-11-10T07:45:20.931Z,1510299920.931 [PNI_TCM](ERROR): CRC does not match. Expected:0x2764 got:0x16384
2017-11-10T07:45:24.136Z,1510299924.136 [PNI_TCM](ERROR): CRC does not match. Expected:0x65013 got:0x17927
2017-11-10T07:45:36.941Z,1510299936.941 [PNI_TCM](ERROR): CRC does not match. Expected:0x46952 got:0x135
2017-11-10T07:45:38.530Z,1510299938.530 [PNI_TCM](ERROR): CRC does not match. Expected:0x31022 got:0x5895
2017-11-10T07:45:40.141Z,1510299940.141 [PNI_TCM](ERROR): CRC does not match. Expected:0x49465 got:0x40832
2017-11-10T07:45:44.930Z,1510299944.930 [PNI_TCM](ERROR): CRC does not match. Expected:0x47419 got:0x40768
2017-11-10T07:46:41.405Z,1510300001.405 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T07:46:41.405Z,1510300001.405 [BPC1] Data Fault, FailCount= 1
2017-11-10T07:46:41.405Z,1510300001.405 [BPC1](ERROR): Data Fault
2017-11-10T07:46:41.468Z,1510300001.468 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T07:46:42.635Z,1510300002.635 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:46:42.635Z,1510300002.635 [BPC1] No Fault, FailCount= 1
2017-11-10T07:47:51.521Z,1510300071.521 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T07:48:02.311Z,1510300082.311 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:48:02.311Z,1510300082.311 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-11-10T07:48:02.311Z,1510300082.311 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:48:02.354Z,1510300082.354 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:48:02.715Z,1510300082.715 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:48:02.715Z,1510300082.715 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-11-10T07:48:03.093Z,1510300083.093 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:48:03.093Z,1510300083.093 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:48:03.094Z,1510300083.094 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:48:53.912Z,1510300133.912 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T07:43:53.5Z
2017-11-10T07:48:53.913Z,1510300133.913 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T07:48:53.913Z,1510300133.913 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T07:48:57.678Z,1510300137.678 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0076.lzma
2017-11-10T07:48:58.165Z,1510300138.165 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0076.lzma.bak
2017-11-10T07:48:58.166Z,1510300138.166 [DataOverHttps](INFO): SBD MOMSN=5225905
2017-11-10T07:49:07.404Z,1510300147.404 [DataOverHttps](INFO): Sending 291 bytes from file Logs/20171110T043737/Express0077.lzma
2017-11-10T07:49:08.169Z,1510300148.169 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0077.lzma.bak
2017-11-10T07:49:08.170Z,1510300148.170 [DataOverHttps](INFO): SBD MOMSN=5225907
2017-11-10T07:49:09.303Z,1510300149.303 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T07:49:09.303Z,1510300149.303 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T07:49:09.303Z,1510300149.303 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T07:49:27.738Z,1510300167.738 [NAL9602](INFO): Powering down
2017-11-10T07:50:43.768Z,1510300243.768 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:50:43.768Z,1510300243.768 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T07:50:43.885Z,1510300243.885 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:50:43.885Z,1510300243.885 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:50:43.885Z,1510300243.885 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:50:43.885Z,1510300243.885 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T07:50:43.885Z,1510300243.885 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:50:44.211Z,1510300244.211 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:50:44.289Z,1510300244.289 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:50:44.372Z,1510300244.372 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:50:45.768Z,1510300245.768 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:50:45.768Z,1510300245.768 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T07:50:45.989Z,1510300245.989 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:50:45.989Z,1510300245.989 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:50:45.989Z,1510300245.989 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:50:45.989Z,1510300245.989 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T07:50:45.989Z,1510300245.989 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:50:46.196Z,1510300246.196 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:50:46.393Z,1510300246.393 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:50:46.475Z,1510300246.475 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:50:47.769Z,1510300247.769 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:50:47.769Z,1510300247.769 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T07:50:48.089Z,1510300248.089 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:50:48.090Z,1510300248.090 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:50:48.090Z,1510300248.090 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:50:48.090Z,1510300248.090 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T07:50:48.090Z,1510300248.090 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:50:48.213Z,1510300248.213 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:50:48.493Z,1510300248.493 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:50:48.710Z,1510300248.710 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:50:50.179Z,1510300250.179 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:50:50.179Z,1510300250.179 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T07:50:50.325Z,1510300250.325 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:50:50.325Z,1510300250.325 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:50:50.325Z,1510300250.325 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:50:50.326Z,1510300250.326 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T07:50:50.326Z,1510300250.326 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:50:50.615Z,1510300250.615 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:50:50.729Z,1510300250.729 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:50:50.812Z,1510300250.812 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:50:52.164Z,1510300252.164 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T07:50:52.164Z,1510300252.164 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T07:50:52.433Z,1510300252.433 [Rowe_600LCM](INFO): Initializing
2017-11-10T07:50:52.433Z,1510300252.433 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T07:50:52.433Z,1510300252.433 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T07:50:52.434Z,1510300252.434 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T07:50:52.434Z,1510300252.434 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T07:50:52.567Z,1510300252.567 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:50:52.567Z,1510300252.567 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T07:50:52.837Z,1510300252.837 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T07:50:53.005Z,1510300253.005 [Rowe_600LCM](INFO): Powering down
2017-11-10T07:51:03.349Z,1510300263.349 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:51:03.349Z,1510300263.349 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-11-10T07:51:03.349Z,1510300263.349 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:51:03.362Z,1510300263.362 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:51:03.785Z,1510300263.785 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:51:03.785Z,1510300263.785 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-11-10T07:51:04.154Z,1510300264.154 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:51:04.155Z,1510300264.155 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:51:04.155Z,1510300264.155 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:51:39.368Z,1510300299.368 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T07:51:39.368Z,1510300299.368 [BPC1] Data Fault, FailCount= 1
2017-11-10T07:51:39.368Z,1510300299.368 [BPC1](ERROR): Data Fault
2017-11-10T07:51:39.431Z,1510300299.431 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T07:51:40.597Z,1510300300.597 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:51:40.597Z,1510300300.597 [BPC1] No Fault, FailCount= 1
2017-11-10T07:53:03.120Z,1510300383.120 [BPC1](ERROR): Failed to parse message.
2017-11-10T07:53:03.120Z,1510300383.120 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T07:53:03.120Z,1510300383.120 [BPC1] Data Fault, FailCount= 1
2017-11-10T07:53:03.120Z,1510300383.120 [BPC1](ERROR): Data Fault
2017-11-10T07:53:03.145Z,1510300383.145 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T07:53:04.347Z,1510300384.347 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:53:04.347Z,1510300384.347 [BPC1] No Fault, FailCount= 1
2017-11-10T07:54:04.345Z,1510300444.345 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:54:04.345Z,1510300444.345 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-11-10T07:54:04.345Z,1510300444.345 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:54:04.359Z,1510300444.359 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:54:04.758Z,1510300444.758 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:54:04.758Z,1510300444.758 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-11-10T07:54:05.145Z,1510300445.145 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:54:05.145Z,1510300445.145 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:54:05.146Z,1510300445.146 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:54:09.552Z,1510300449.552 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T07:54:09.552Z,1510300449.552 [Default:CheckIn:C.Wait] Stopped
2017-11-10T07:54:09.552Z,1510300449.552 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T07:54:09.552Z,1510300449.552 [Default:CheckIn:D] Running Loop=1
2017-11-10T07:54:09.962Z,1510300449.962 [Default:CheckIn:D] Stopped
2017-11-10T07:54:09.962Z,1510300449.962 [Default:CheckIn:E] Running Loop=1
2017-11-10T07:54:10.382Z,1510300450.382 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 192.614030 min 
2017-11-10T07:54:10.382Z,1510300450.382 [Default:CheckIn:E] Stopped
2017-11-10T07:54:10.382Z,1510300450.382 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T07:54:10.382Z,1510300450.382 [Default:CheckIn] Stopped
2017-11-10T07:54:10.382Z,1510300450.382 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T07:54:10.382Z,1510300450.382 [Default:CheckIn](INFO): Running loop #20
2017-11-10T07:54:10.382Z,1510300450.382 [Default:CheckIn] Running Loop=20
2017-11-10T07:54:10.383Z,1510300450.383 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T07:54:10.383Z,1510300450.383 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T07:54:13.499Z,1510300453.499 [NAL9602](INFO): Powering up
2017-11-10T07:54:24.682Z,1510300464.682 [NAL9602](INFO): NAL9602 initialized
2017-11-10T07:54:56.295Z,1510300496.295 [NAL9602](INFO): SBD MO Status=2, MOMSN=2610, MT Status=2, MTMSN=0
2017-11-10T07:54:56.296Z,1510300496.296 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-11-10T07:55:44.752Z,1510300544.752 [NAL9602](INFO): SBD MO Status=2, MOMSN=2610, MT Status=2, MTMSN=0
2017-11-10T07:55:44.752Z,1510300544.752 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-11-10T07:56:14.033Z,1510300574.033 [NAL9602](INFO): SBD MO Status=0, MOMSN=2610, MT Status=0, MTMSN=0
2017-11-10T07:56:14.033Z,1510300574.033 [NAL9602](INFO): No messages in MT queue
2017-11-10T07:56:14.033Z,1510300574.033 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2017-11-10T07:56:14.594Z,1510300574.594 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T07:56:14.594Z,1510300574.594 [NAL9602] Data Fault, FailCount= 1
2017-11-10T07:56:14.594Z,1510300574.594 [NAL9602](ERROR): Data Fault
2017-11-10T07:56:14.696Z,1510300574.696 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T07:56:14.994Z,1510300574.994 [NAL9602](INFO): Powering down
2017-11-10T07:56:15.861Z,1510300575.861 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T07:56:15.861Z,1510300575.861 [NAL9602] No Fault, FailCount= 1
2017-11-10T07:56:45.390Z,1510300605.390 [NAL9602](INFO): Powering up NAL9602
2017-11-10T07:56:56.190Z,1510300616.190 [NAL9602](INFO): NAL9602 initialized
2017-11-10T07:57:05.462Z,1510300625.462 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T07:57:05.462Z,1510300625.462 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-11-10T07:57:05.462Z,1510300625.462 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T07:57:05.478Z,1510300625.478 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T07:57:05.880Z,1510300625.880 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T07:57:05.897Z,1510300625.897 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-11-10T07:57:06.251Z,1510300626.251 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T07:57:06.251Z,1510300626.251 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T07:57:06.251Z,1510300626.251 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T07:57:51.857Z,1510300671.857 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T07:58:04.629Z,1510300684.629 [BPC1](ERROR): Failed to parse bank B battery data
2017-11-10T07:58:04.629Z,1510300684.629 [BPC1] Data Fault, FailCount= 1
2017-11-10T07:58:04.629Z,1510300684.629 [BPC1](ERROR): Data Fault
2017-11-10T07:58:04.686Z,1510300684.686 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T07:58:05.854Z,1510300685.854 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T07:58:05.854Z,1510300685.854 [BPC1] No Fault, FailCount= 1
2017-11-10T07:59:10.650Z,1510300750.650 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T07:54:10.4Z
2017-11-10T07:59:10.650Z,1510300750.650 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T07:59:10.650Z,1510300750.650 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T07:59:14.746Z,1510300754.746 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0080.lzma
2017-11-10T07:59:15.545Z,1510300755.545 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0080.lzma.bak
2017-11-10T07:59:15.546Z,1510300755.546 [DataOverHttps](INFO): SBD MOMSN=5225919
2017-11-10T07:59:24.905Z,1510300764.905 [DataOverHttps](INFO): Sending 245 bytes from file Logs/20171110T043737/Express0081.lzma
2017-11-10T07:59:25.702Z,1510300765.702 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0081.lzma.bak
2017-11-10T07:59:25.702Z,1510300765.702 [DataOverHttps](INFO): SBD MOMSN=5225921
2017-11-10T07:59:26.823Z,1510300766.823 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T07:59:26.823Z,1510300766.823 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T07:59:26.823Z,1510300766.823 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T07:59:41.754Z,1510300781.754 [NAL9602](INFO): Powering down
2017-11-10T08:00:06.595Z,1510300806.595 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T08:00:06.595Z,1510300806.595 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-11-10T08:00:06.595Z,1510300806.595 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T08:00:06.608Z,1510300806.608 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T08:00:07.014Z,1510300807.014 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T08:00:07.014Z,1510300807.014 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-11-10T08:00:07.392Z,1510300807.392 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T08:00:07.392Z,1510300807.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T08:00:07.392Z,1510300807.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T08:00:52.777Z,1510300852.777 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:00:52.777Z,1510300852.777 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T08:00:52.933Z,1510300852.933 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:00:52.934Z,1510300852.934 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:00:52.934Z,1510300852.934 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:00:52.934Z,1510300852.934 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T08:00:52.934Z,1510300852.934 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:00:53.185Z,1510300853.185 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:00:53.337Z,1510300853.337 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:00:53.422Z,1510300853.422 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:00:54.751Z,1510300854.751 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:00:54.751Z,1510300854.751 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T08:00:55.037Z,1510300855.037 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:00:55.037Z,1510300855.037 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:00:55.037Z,1510300855.037 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:00:55.037Z,1510300855.037 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T08:00:55.038Z,1510300855.038 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:00:55.153Z,1510300855.153 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:00:55.441Z,1510300855.441 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:00:55.635Z,1510300855.635 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:00:57.152Z,1510300857.152 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:00:57.152Z,1510300857.152 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T08:00:57.249Z,1510300857.249 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:00:57.249Z,1510300857.249 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:00:57.250Z,1510300857.250 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:00:57.250Z,1510300857.250 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T08:00:57.250Z,1510300857.250 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:00:57.597Z,1510300857.597 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:00:57.653Z,1510300857.653 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:00:57.738Z,1510300857.738 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:00:59.159Z,1510300859.159 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:00:59.159Z,1510300859.159 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T08:00:59.353Z,1510300859.353 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:00:59.353Z,1510300859.353 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:00:59.353Z,1510300859.353 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:00:59.353Z,1510300859.353 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T08:00:59.354Z,1510300859.354 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:00:59.553Z,1510300859.553 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:00:59.757Z,1510300859.757 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:00:59.842Z,1510300859.842 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:01:01.172Z,1510300861.172 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:01:01.172Z,1510300861.172 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T08:01:01.457Z,1510300861.457 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:01:01.457Z,1510300861.457 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:01:01.458Z,1510300861.458 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:01:01.458Z,1510300861.458 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T08:01:01.458Z,1510300861.458 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:01:01.573Z,1510300861.573 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:01:01.573Z,1510300861.573 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:01:01.861Z,1510300861.861 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:01:02.082Z,1510300862.082 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:03:07.630Z,1510300987.630 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T08:03:07.630Z,1510300987.630 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-11-10T08:03:07.630Z,1510300987.630 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T08:03:07.644Z,1510300987.644 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T08:03:08.058Z,1510300988.058 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T08:03:08.058Z,1510300988.058 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-11-10T08:03:08.426Z,1510300988.426 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T08:03:08.427Z,1510300988.427 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T08:03:08.427Z,1510300988.427 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T08:04:27.113Z,1510301067.113 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T08:04:27.114Z,1510301067.114 [Default:CheckIn:C.Wait] Stopped
2017-11-10T08:04:27.114Z,1510301067.114 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T08:04:27.114Z,1510301067.114 [Default:CheckIn:D] Running Loop=1
2017-11-10T08:04:27.438Z,1510301067.438 [Default:CheckIn:D] Stopped
2017-11-10T08:04:27.438Z,1510301067.438 [Default:CheckIn:E] Running Loop=1
2017-11-10T08:04:27.853Z,1510301067.853 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 202.905306 min 
2017-11-10T08:04:27.853Z,1510301067.853 [Default:CheckIn:E] Stopped
2017-11-10T08:04:27.853Z,1510301067.853 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T08:04:27.853Z,1510301067.853 [Default:CheckIn] Stopped
2017-11-10T08:04:27.854Z,1510301067.854 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T08:04:27.854Z,1510301067.854 [Default:CheckIn](INFO): Running loop #21
2017-11-10T08:04:27.854Z,1510301067.854 [Default:CheckIn] Running Loop=21
2017-11-10T08:04:27.854Z,1510301067.854 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T08:04:27.854Z,1510301067.854 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T08:04:31.019Z,1510301071.019 [NAL9602](INFO): Powering up
2017-11-10T08:04:42.214Z,1510301082.214 [NAL9602](INFO): NAL9602 initialized
2017-11-10T08:05:27.420Z,1510301127.420 [NAL9602](INFO): SBD MO Status=2, MOMSN=2611, MT Status=2, MTMSN=0
2017-11-10T08:05:27.420Z,1510301127.420 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-11-10T08:05:53.400Z,1510301153.400 [NAL9602](INFO): SBD MO Status=2, MOMSN=2611, MT Status=2, MTMSN=0
2017-11-10T08:05:53.400Z,1510301153.400 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-11-10T08:06:08.603Z,1510301168.603 [NAL9602](INFO): SBD MO Status=0, MOMSN=2611, MT Status=0, MTMSN=0
2017-11-10T08:06:08.603Z,1510301168.603 [NAL9602](INFO): No messages in MT queue
2017-11-10T08:06:08.655Z,1510301168.655 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T08:06:08.656Z,1510301168.656 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-11-10T08:06:08.656Z,1510301168.656 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T08:06:08.693Z,1510301168.693 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T08:06:09.059Z,1510301169.059 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T08:06:09.060Z,1510301169.060 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-11-10T08:06:09.490Z,1510301169.490 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T08:06:09.490Z,1510301169.490 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T08:06:09.491Z,1510301169.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T08:06:20.634Z,1510301180.634 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T08:06:20.634Z,1510301180.634 [BPC1] Data Fault, FailCount= 1
2017-11-10T08:06:20.634Z,1510301180.634 [BPC1](ERROR): Data Fault
2017-11-10T08:06:20.741Z,1510301180.741 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T08:06:21.898Z,1510301181.898 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T08:06:21.898Z,1510301181.898 [BPC1] No Fault, FailCount= 1
2017-11-10T08:06:58.697Z,1510301218.697 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T08:06:58.697Z,1510301218.697 [NAL9602] Data Fault, FailCount= 1
2017-11-10T08:06:58.697Z,1510301218.697 [NAL9602](ERROR): Data Fault
2017-11-10T08:06:58.780Z,1510301218.780 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T08:06:59.090Z,1510301219.090 [NAL9602](INFO): Powering down
2017-11-10T08:06:59.944Z,1510301219.944 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T08:06:59.944Z,1510301219.944 [NAL9602] No Fault, FailCount= 1
2017-11-10T08:07:31.481Z,1510301251.481 [NAL9602](INFO): Powering up NAL9602
2017-11-10T08:07:42.434Z,1510301262.434 [NAL9602](INFO): NAL9602 initialized
2017-11-10T08:07:52.126Z,1510301272.126 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T08:09:09.665Z,1510301349.665 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T08:09:09.665Z,1510301349.665 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-11-10T08:09:09.665Z,1510301349.665 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T08:09:09.678Z,1510301349.678 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T08:09:10.084Z,1510301350.084 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T08:09:10.084Z,1510301350.084 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-11-10T08:09:10.478Z,1510301350.478 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T08:09:10.478Z,1510301350.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T08:09:10.479Z,1510301350.479 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T08:09:26.046Z,1510301366.046 [BPC1](ERROR): Failed to receive battery data
2017-11-10T08:09:26.046Z,1510301366.046 [BPC1] Communications Fault, FailCount= 1
2017-11-10T08:09:26.046Z,1510301366.046 [BPC1](ERROR): Communications Fault
2017-11-10T08:09:26.096Z,1510301366.096 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T08:09:27.286Z,1510301367.286 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T08:09:27.286Z,1510301367.286 [BPC1] No Fault, FailCount= 1
2017-11-10T08:09:28.075Z,1510301368.075 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T08:04:27.9Z
2017-11-10T08:09:28.075Z,1510301368.075 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T08:09:28.076Z,1510301368.076 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T08:09:32.139Z,1510301372.139 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0084.lzma
2017-11-10T08:09:32.941Z,1510301372.941 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0084.lzma.bak
2017-11-10T08:09:32.942Z,1510301372.942 [DataOverHttps](INFO): SBD MOMSN=5225932
2017-11-10T08:09:42.312Z,1510301382.312 [DataOverHttps](INFO): Sending 243 bytes from file Logs/20171110T043737/Express0085.lzma
2017-11-10T08:09:43.113Z,1510301383.113 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0085.lzma.bak
2017-11-10T08:09:43.114Z,1510301383.114 [DataOverHttps](INFO): SBD MOMSN=5225934
2017-11-10T08:09:44.251Z,1510301384.251 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T08:09:44.251Z,1510301384.251 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T08:09:44.251Z,1510301384.251 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T08:10:02.366Z,1510301402.366 [NAL9602](INFO): Powering down
2017-11-10T08:11:01.772Z,1510301461.772 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:11:01.772Z,1510301461.772 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T08:11:01.949Z,1510301461.949 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:11:01.949Z,1510301461.949 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:11:01.949Z,1510301461.949 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:11:01.950Z,1510301461.950 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T08:11:01.950Z,1510301461.950 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:11:02.219Z,1510301462.219 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:11:02.353Z,1510301462.353 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:11:02.455Z,1510301462.455 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:11:03.774Z,1510301463.774 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:11:03.774Z,1510301463.774 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T08:11:04.069Z,1510301464.069 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:11:04.069Z,1510301464.069 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:11:04.069Z,1510301464.069 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:11:04.070Z,1510301464.070 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T08:11:04.070Z,1510301464.070 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:11:04.204Z,1510301464.204 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:11:04.473Z,1510301464.473 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:11:04.664Z,1510301464.664 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:11:06.179Z,1510301466.179 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:11:06.179Z,1510301466.179 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T08:11:06.277Z,1510301466.277 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:11:06.277Z,1510301466.277 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:11:06.277Z,1510301466.277 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:11:06.278Z,1510301466.278 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T08:11:06.278Z,1510301466.278 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:11:06.598Z,1510301466.598 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:11:06.681Z,1510301466.681 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:11:06.765Z,1510301466.765 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:11:08.186Z,1510301468.186 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:11:08.186Z,1510301468.186 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T08:11:08.381Z,1510301468.381 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:11:08.381Z,1510301468.381 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:11:08.381Z,1510301468.381 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:11:08.382Z,1510301468.382 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T08:11:08.382Z,1510301468.382 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:11:08.595Z,1510301468.595 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:11:08.785Z,1510301468.785 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:11:08.874Z,1510301468.874 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:11:10.209Z,1510301470.209 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:11:10.209Z,1510301470.209 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T08:11:10.489Z,1510301470.489 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:11:10.490Z,1510301470.490 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:11:10.490Z,1510301470.490 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:11:10.490Z,1510301470.490 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T08:11:10.490Z,1510301470.490 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:11:10.606Z,1510301470.606 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:11:10.607Z,1510301470.607 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:11:10.893Z,1510301470.893 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:11:11.099Z,1510301471.099 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:11:20.942Z,1510301480.942 [BPC1](ERROR): Failed to receive battery data
2017-11-10T08:11:20.942Z,1510301480.942 [BPC1] Communications Fault, FailCount= 1
2017-11-10T08:11:20.942Z,1510301480.942 [BPC1](ERROR): Communications Fault
2017-11-10T08:11:21.033Z,1510301481.033 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T08:11:22.201Z,1510301482.201 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T08:11:22.201Z,1510301482.201 [BPC1] No Fault, FailCount= 1
2017-11-10T08:11:51.322Z,1510301511.322 [PNI_TCM](ERROR): CRC does not match. Expected:0x36692 got:0x7362
2017-11-10T08:11:52.918Z,1510301512.918 [PNI_TCM](ERROR): CRC does not match. Expected:0x36265 got:0x1712
2017-11-10T08:11:54.518Z,1510301514.518 [PNI_TCM](ERROR): CRC does not match. Expected:0x58873 got:0x48052
2017-11-10T08:12:10.541Z,1510301530.541 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T08:12:10.541Z,1510301530.541 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-11-10T08:12:10.541Z,1510301530.541 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T08:12:10.554Z,1510301530.554 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T08:12:10.963Z,1510301530.963 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T08:12:10.963Z,1510301530.963 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-11-10T08:12:11.346Z,1510301531.346 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T08:12:11.347Z,1510301531.347 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T08:12:11.347Z,1510301531.347 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T08:12:12.126Z,1510301532.126 [PNI_TCM](ERROR): CRC does not match. Expected:0x15254 got:0x1707
2017-11-10T08:12:20.131Z,1510301540.131 [PNI_TCM](ERROR): CRC does not match. Expected:0x15177 got:0x7490
2017-11-10T08:12:23.318Z,1510301543.318 [PNI_TCM](ERROR): CRC does not match. Expected:0x26420 got:0x41246
2017-11-10T08:12:24.917Z,1510301544.917 [PNI_TCM](ERROR): CRC does not match. Expected:0x41923 got:0x41133
2017-11-10T08:12:40.924Z,1510301560.924 [PNI_TCM](ERROR): CRC does not match. Expected:0x4918 got:0x44938
2017-11-10T08:12:42.530Z,1510301562.530 [PNI_TCM](ERROR): CRC does not match. Expected:0x7877 got:0x31896
2017-11-10T08:14:44.713Z,1510301684.713 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T08:14:44.713Z,1510301684.713 [Default:CheckIn:C.Wait] Stopped
2017-11-10T08:14:44.713Z,1510301684.713 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T08:14:44.714Z,1510301684.714 [Default:CheckIn:D] Running Loop=1
2017-11-10T08:14:45.117Z,1510301685.117 [Default:CheckIn:D] Stopped
2017-11-10T08:14:45.117Z,1510301685.117 [Default:CheckIn:E] Running Loop=1
2017-11-10T08:14:45.514Z,1510301685.514 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 213.199951 min 
2017-11-10T08:14:45.514Z,1510301685.514 [Default:CheckIn:E] Stopped
2017-11-10T08:14:45.514Z,1510301685.514 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T08:14:45.514Z,1510301685.514 [Default:CheckIn] Stopped
2017-11-10T08:14:45.514Z,1510301685.514 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T08:14:45.514Z,1510301685.514 [Default:CheckIn](INFO): Running loop #22
2017-11-10T08:14:45.514Z,1510301685.514 [Default:CheckIn] Running Loop=22
2017-11-10T08:14:45.515Z,1510301685.515 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T08:14:45.515Z,1510301685.515 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T08:14:48.828Z,1510301688.828 [NAL9602](INFO): Powering up
2017-11-10T08:15:00.026Z,1510301700.026 [NAL9602](INFO): NAL9602 initialized
2017-11-10T08:15:11.710Z,1510301711.710 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T08:15:11.710Z,1510301711.710 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-11-10T08:15:11.710Z,1510301711.710 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T08:15:11.735Z,1510301711.735 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T08:15:12.106Z,1510301712.106 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T08:15:12.106Z,1510301712.106 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-11-10T08:15:12.483Z,1510301712.483 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T08:15:12.483Z,1510301712.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T08:15:12.483Z,1510301712.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T08:15:20.827Z,1510301720.827 [NAL9602](INFO): SBD MO Status=2, MOMSN=2612, MT Status=2, MTMSN=0
2017-11-10T08:15:20.827Z,1510301720.827 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-11-10T08:16:38.031Z,1510301798.031 [NAL9602](INFO): SBD MO Status=2, MOMSN=2612, MT Status=2, MTMSN=0
2017-11-10T08:16:38.032Z,1510301798.032 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-11-10T08:16:55.314Z,1510301815.314 [PNI_TCM](ERROR): CRC does not match. Expected:0x31397 got:0x44717
2017-11-10T08:16:56.915Z,1510301816.915 [PNI_TCM](ERROR): CRC does not match. Expected:0x35735 got:0x44792
2017-11-10T08:16:58.514Z,1510301818.514 [PNI_TCM](ERROR): CRC does not match. Expected:0x45163 got:0x45083
2017-11-10T08:17:06.523Z,1510301826.523 [PNI_TCM](ERROR): CRC does not match. Expected:0x51762 got:0x9037
2017-11-10T08:17:08.122Z,1510301828.122 [PNI_TCM](ERROR): CRC does not match. Expected:0x20803 got:0x1857
2017-11-10T08:17:11.323Z,1510301831.323 [PNI_TCM](ERROR): CRC does not match. Expected:0x42382 got:0x5918
2017-11-10T08:17:14.515Z,1510301834.515 [PNI_TCM](ERROR): CRC does not match. Expected:0x1070 got:0x16384
2017-11-10T08:17:16.119Z,1510301836.119 [PNI_TCM](ERROR): CRC does not match. Expected:0x36134 got:0x46
2017-11-10T08:17:17.721Z,1510301837.721 [PNI_TCM](ERROR): CRC does not match. Expected:0x51489 got:0x57095
2017-11-10T08:17:19.319Z,1510301839.319 [PNI_TCM](ERROR): CRC does not match. Expected:0x44734 got:0x16799
2017-11-10T08:17:30.536Z,1510301850.536 [PNI_TCM](ERROR): CRC does not match. Expected:0x45354 got:0x60109
2017-11-10T08:17:38.515Z,1510301858.515 [PNI_TCM](ERROR): CRC does not match. Expected:0x37061 got:0x6977
2017-11-10T08:17:43.318Z,1510301863.318 [PNI_TCM](ERROR): CRC does not match. Expected:0x10048 got:0x169
2017-11-10T08:17:52.354Z,1510301872.354 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T08:18:12.735Z,1510301892.735 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T08:18:12.736Z,1510301892.736 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-11-10T08:18:12.736Z,1510301892.736 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T08:18:12.749Z,1510301892.749 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T08:18:13.148Z,1510301893.148 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T08:18:13.148Z,1510301893.148 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-11-10T08:18:13.530Z,1510301893.530 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T08:18:13.530Z,1510301893.530 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T08:18:13.530Z,1510301893.530 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T08:19:12.704Z,1510301952.704 [BPC1](ERROR): Failed to receive battery data
2017-11-10T08:19:12.704Z,1510301952.704 [BPC1] Communications Fault, FailCount= 1
2017-11-10T08:19:12.705Z,1510301952.705 [BPC1](ERROR): Communications Fault
2017-11-10T08:19:12.765Z,1510301952.765 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T08:19:13.925Z,1510301953.925 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T08:19:13.925Z,1510301953.925 [BPC1] No Fault, FailCount= 1
2017-11-10T08:19:45.551Z,1510301985.551 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T08:14:45.5Z
2017-11-10T08:19:45.551Z,1510301985.551 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T08:19:45.551Z,1510301985.551 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T08:19:49.711Z,1510301989.711 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0088.lzma
2017-11-10T08:19:50.502Z,1510301990.502 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0088.lzma.bak
2017-11-10T08:19:50.502Z,1510301990.502 [DataOverHttps](INFO): SBD MOMSN=5225944
2017-11-10T08:20:00.338Z,1510302000.338 [DataOverHttps](INFO): Sending 204 bytes from file Logs/20171110T043737/Express0089.lzma
2017-11-10T08:20:01.122Z,1510302001.122 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0089.lzma.bak
2017-11-10T08:20:01.122Z,1510302001.122 [DataOverHttps](INFO): SBD MOMSN=5225946
2017-11-10T08:20:02.301Z,1510302002.301 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T08:20:02.301Z,1510302002.301 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T08:20:02.301Z,1510302002.301 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T08:20:05.517Z,1510302005.517 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-11-10T08:20:35.986Z,1510302035.986 [NAL9602](INFO): Powering down
2017-11-10T08:21:08.481Z,1510302068.481 [BPC1](ERROR): Failed to receive battery data
2017-11-10T08:21:08.481Z,1510302068.481 [BPC1] Communications Fault, FailCount= 1
2017-11-10T08:21:08.481Z,1510302068.481 [BPC1](ERROR): Communications Fault
2017-11-10T08:21:08.540Z,1510302068.540 [CBIT](ERROR): Communications Fault in component: BPC1
2017-11-10T08:21:09.715Z,1510302069.715 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T08:21:09.715Z,1510302069.715 [BPC1] No Fault, FailCount= 1
2017-11-10T08:21:10.509Z,1510302070.509 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:21:10.509Z,1510302070.509 [Rowe_600LCM] No Fault, FailCount= 5
2017-11-10T08:21:10.565Z,1510302070.565 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:21:10.565Z,1510302070.565 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:21:10.566Z,1510302070.566 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:21:10.566Z,1510302070.566 [Rowe_600LCM] Hardware Fault, FailCount= 1
2017-11-10T08:21:10.566Z,1510302070.566 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:21:10.919Z,1510302070.919 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:21:10.969Z,1510302070.969 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:21:11.054Z,1510302071.054 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:21:12.522Z,1510302072.522 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:21:12.523Z,1510302072.523 [Rowe_600LCM] No Fault, FailCount= 1
2017-11-10T08:21:12.669Z,1510302072.669 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:21:12.669Z,1510302072.669 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:21:12.670Z,1510302072.670 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:21:12.670Z,1510302072.670 [Rowe_600LCM] Hardware Fault, FailCount= 2
2017-11-10T08:21:12.670Z,1510302072.670 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:21:12.917Z,1510302072.917 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:21:13.073Z,1510302073.073 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:21:13.160Z,1510302073.160 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:21:13.712Z,1510302073.712 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T08:21:13.712Z,1510302073.712 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-11-10T08:21:13.712Z,1510302073.712 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T08:21:13.734Z,1510302073.734 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T08:21:14.114Z,1510302074.114 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T08:21:14.114Z,1510302074.114 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-11-10T08:21:14.501Z,1510302074.501 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T08:21:14.502Z,1510302074.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T08:21:14.502Z,1510302074.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T08:21:14.516Z,1510302074.516 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:21:14.516Z,1510302074.516 [Rowe_600LCM] No Fault, FailCount= 2
2017-11-10T08:21:14.777Z,1510302074.777 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:21:14.777Z,1510302074.777 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:21:14.777Z,1510302074.777 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:21:14.778Z,1510302074.778 [Rowe_600LCM] Hardware Fault, FailCount= 3
2017-11-10T08:21:14.778Z,1510302074.778 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:21:14.923Z,1510302074.923 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:21:15.181Z,1510302075.181 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:21:15.354Z,1510302075.354 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:21:16.939Z,1510302076.939 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:21:16.940Z,1510302076.940 [Rowe_600LCM] No Fault, FailCount= 3
2017-11-10T08:21:16.969Z,1510302076.969 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:21:16.969Z,1510302076.969 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:21:16.969Z,1510302076.969 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:21:16.970Z,1510302076.970 [Rowe_600LCM] Hardware Fault, FailCount= 4
2017-11-10T08:21:16.970Z,1510302076.970 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:21:17.331Z,1510302077.331 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:21:17.373Z,1510302077.373 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:21:17.458Z,1510302077.458 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:21:18.927Z,1510302078.927 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-11-10T08:21:18.927Z,1510302078.927 [Rowe_600LCM] No Fault, FailCount= 4
2017-11-10T08:21:19.073Z,1510302079.073 [Rowe_600LCM](INFO): Initializing
2017-11-10T08:21:19.074Z,1510302079.074 [Rowe_600LCM](INFO): Checking LCM
2017-11-10T08:21:19.074Z,1510302079.074 [Rowe_600LCM](FAULT): LCM not connected
2017-11-10T08:21:19.074Z,1510302079.074 [Rowe_600LCM] Hardware Fault, FailCount= 5
2017-11-10T08:21:19.074Z,1510302079.074 [Rowe_600LCM](ERROR): Hardware Fault
2017-11-10T08:21:19.384Z,1510302079.384 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:21:19.384Z,1510302079.384 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2017-11-10T08:21:19.477Z,1510302079.477 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-11-10T08:21:19.591Z,1510302079.591 [Rowe_600LCM](INFO): Powering down
2017-11-10T08:24:14.839Z,1510302254.839 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T08:24:14.839Z,1510302254.839 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-11-10T08:24:14.839Z,1510302254.839 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T08:24:14.853Z,1510302254.853 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T08:24:15.263Z,1510302255.263 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T08:24:15.263Z,1510302255.263 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-11-10T08:24:15.652Z,1510302255.652 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T08:24:15.652Z,1510302255.652 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T08:24:15.653Z,1510302255.653 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T08:25:02.441Z,1510302302.441 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-11-10T08:25:02.441Z,1510302302.441 [Default:CheckIn:C.Wait] Stopped
2017-11-10T08:25:02.441Z,1510302302.441 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-11-10T08:25:02.441Z,1510302302.441 [Default:CheckIn:D] Running Loop=1
2017-11-10T08:25:02.841Z,1510302302.841 [Default:CheckIn:D] Stopped
2017-11-10T08:25:02.841Z,1510302302.841 [Default:CheckIn:E] Running Loop=1
2017-11-10T08:25:03.252Z,1510302303.252 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 223.495361 min 
2017-11-10T08:25:03.277Z,1510302303.277 [Default:CheckIn:E] Stopped
2017-11-10T08:25:03.277Z,1510302303.277 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-11-10T08:25:03.277Z,1510302303.277 [Default:CheckIn] Stopped
2017-11-10T08:25:03.277Z,1510302303.277 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-11-10T08:25:03.277Z,1510302303.277 [Default:CheckIn](INFO): Running loop #23
2017-11-10T08:25:03.277Z,1510302303.277 [Default:CheckIn] Running Loop=23
2017-11-10T08:25:03.277Z,1510302303.277 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-11-10T08:25:03.277Z,1510302303.277 [Default:CheckIn:Read_GPS] Running Loop=1
2017-11-10T08:25:06.746Z,1510302306.746 [NAL9602](INFO): Powering up
2017-11-10T08:25:17.614Z,1510302317.614 [NAL9602](INFO): NAL9602 initialized
2017-11-10T08:25:18.418Z,1510302318.418 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-11-10T08:25:18.418Z,1510302318.418 [NAL9602] Data Fault, FailCount= 2
2017-11-10T08:25:18.418Z,1510302318.418 [NAL9602](ERROR): Data Fault
2017-11-10T08:25:18.515Z,1510302318.515 [CBIT](ERROR): Data Fault in component: NAL9602
2017-11-10T08:25:18.818Z,1510302318.818 [NAL9602](INFO): Powering down
2017-11-10T08:25:19.677Z,1510302319.677 [CBIT](INFO): Clearing failed state for component NAL9602
2017-11-10T08:25:19.677Z,1510302319.677 [NAL9602] No Fault, FailCount= 2
2017-11-10T08:25:49.214Z,1510302349.214 [NAL9602](INFO): Powering up NAL9602
2017-11-10T08:25:56.843Z,1510302356.843 [BPC1](ERROR): Failed to parse bank A battery data
2017-11-10T08:25:56.843Z,1510302356.843 [BPC1] Data Fault, FailCount= 1
2017-11-10T08:25:56.843Z,1510302356.843 [BPC1](ERROR): Data Fault
2017-11-10T08:25:56.907Z,1510302356.907 [CBIT](ERROR): Data Fault in component: BPC1
2017-11-10T08:25:58.105Z,1510302358.105 [CBIT](INFO): Clearing failed state for component BPC1
2017-11-10T08:25:58.105Z,1510302358.105 [BPC1] No Fault, FailCount= 1
2017-11-10T08:26:00.014Z,1510302360.014 [NAL9602](INFO): NAL9602 initialized
2017-11-10T08:26:59.733Z,1510302419.733 [PNI_TCM](ERROR): CRC does not match. Expected:0x48740 got:0x40472
2017-11-10T08:27:08.499Z,1510302428.499 [PNI_TCM](ERROR): CRC does not match. Expected:0x21600 got:0x44833
2017-11-10T08:27:12.911Z,1510302432.911 [PNI_TCM](ERROR): CRC does not match. Expected:0x18928 got:0x138
2017-11-10T08:27:15.727Z,1510302435.727 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T08:27:15.728Z,1510302435.728 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-11-10T08:27:15.728Z,1510302435.728 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T08:27:15.773Z,1510302435.773 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T08:27:16.130Z,1510302436.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T08:27:16.130Z,1510302436.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-11-10T08:27:16.553Z,1510302436.553 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T08:27:16.554Z,1510302436.554 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T08:27:16.554Z,1510302436.554 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T08:27:17.715Z,1510302437.715 [PNI_TCM](ERROR): CRC does not match. Expected:0x36330 got:0x15644
2017-11-10T08:27:22.513Z,1510302442.513 [PNI_TCM](ERROR): CRC does not match. Expected:0x4505 got:0x6977
2017-11-10T08:27:43.314Z,1510302463.314 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-11-10T08:27:49.706Z,1510302469.706 [PNI_TCM](ERROR): CRC does not match. Expected:0x17658 got:0x31771
2017-11-10T08:27:52.540Z,1510302472.540 [CBIT](DEBUG): EFC running - data check-sum false
2017-11-10T08:27:55.294Z,1510302475.294 [PNI_TCM](ERROR): CRC does not match. Expected:0x56044 got:0x250
2017-11-10T08:28:06.812Z,1510302486.812 [PNI_TCM](ERROR): CRC does not match. Expected:0x45992 got:0x7490
2017-11-10T08:28:06.813Z,1510302486.813 [PNI_TCM](ERROR): CRC does not match. Expected:0x17821 got:0x7490
2017-11-10T08:28:06.813Z,1510302486.813 [PNI_TCM](ERROR): CRC does not match. Expected:0x983 got:0x7490
2017-11-10T08:28:06.813Z,1510302486.813 [PNI_TCM](ERROR): CRC does not match. Expected:0x63849 got:0x7490
2017-11-10T08:28:06.814Z,1510302486.814 [PNI_TCM](ERROR): CRC does not match. Expected:0x19560 got:0x7490
2017-11-10T08:28:06.814Z,1510302486.814 [PNI_TCM](ERROR): CRC does not match. Expected:0x61334 got:0x7490
2017-11-10T08:28:06.815Z,1510302486.815 [PNI_TCM](ERROR): CRC does not match. Expected:0x40038 got:0x7490
2017-11-10T08:30:03.425Z,1510302603.425 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-11-10T08:25:03.3Z
2017-11-10T08:30:03.426Z,1510302603.426 [Default:CheckIn:Read_GPS] Stopped
2017-11-10T08:30:03.426Z,1510302603.426 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-11-10T08:30:07.309Z,1510302607.309 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171110T043737/Courier0092.lzma
2017-11-10T08:30:08.110Z,1510302608.110 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Courier0092.lzma.bak
2017-11-10T08:30:08.110Z,1510302608.110 [DataOverHttps](INFO): SBD MOMSN=5225955
2017-11-10T08:30:17.510Z,1510302617.510 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-11-10T08:30:17.510Z,1510302617.510 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2017-11-10T08:30:17.510Z,1510302617.510 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-11-10T08:30:17.543Z,1510302617.543 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-11-10T08:30:17.569Z,1510302617.569 [DataOverHttps](INFO): Sending 293 bytes from file Logs/20171110T043737/Express0093.lzma
2017-11-10T08:30:17.668Z,1510302617.668 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-11-10T08:30:17.668Z,1510302617.668 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2017-11-10T08:30:18.019Z,1510302618.019 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-11-10T08:30:18.019Z,1510302618.019 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-11-10T08:30:18.019Z,1510302618.019 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-11-10T08:30:18.362Z,1510302618.362 [DataOverHttps](INFO): Moved sent file to Logs/20171110T043737/Express0093.lzma.bak
2017-11-10T08:30:18.362Z,1510302618.362 [DataOverHttps](INFO): SBD MOMSN=5225957
2017-11-10T08:30:19.519Z,1510302619.519 [Default:CheckIn:Read_Iridium] Stopped
2017-11-10T08:30:19.519Z,1510302619.519 [Default:CheckIn:C.Wait] Running Loop=1
2017-11-10T08:30:19.519Z,1510302619.519 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-11-10T08:30:59.585Z,1510302659.585 [BPC1](ERROR): Failed to receive battery data
2017-11-10T08:30:59.585Z,1510302659.585 [BPC1] Communications Fault, FailCount= 1
2017-11-10T08:30:59.624Z,1510302659.624 [BPC1](ERROR): Communications Fault
2017-11